1 files changed, 102 insertions, 0 deletions
diff --git a/drivers/mtd/maps/physmap_of_gemini.c b/drivers/mtd/maps/physmap_of_gemini.c
new file mode 100644
index 000000000..830b1b7e7
--- /dev/null
+++ b/drivers/mtd/maps/physmap_of_gemini.c
@@ -0,0 +1,102 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Cortina Systems Gemini OF physmap add-on
+ * Copyright (C) 2017 Linus Walleij <linus.walleij@linaro.org>
+ *
+ * This SoC has an elaborate flash control register, so we need to
+ * detect and set it up when booting on this platform.
+ */
+#include <linux/export.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/mtd/map.h>
+#include <linux/mfd/syscon.h>
+#include <linux/regmap.h>
+#include <linux/bitops.h>
+#include "physmap_of_gemini.h"
+
+/*
+ * The Flash-relevant parts of the global status register
+ * These would also be relevant for a NAND driver.
+ */
+#define GLOBAL_STATUS			0x04
+#define FLASH_TYPE_MASK			(0x3 << 24)
+#define FLASH_TYPE_NAND_2K		(0x3 << 24)
+#define FLASH_TYPE_NAND_512		(0x2 << 24)
+#define FLASH_TYPE_PARALLEL		(0x1 << 24)
+#define FLASH_TYPE_SERIAL		(0x0 << 24)
+/* if parallel */
+#define FLASH_WIDTH_16BIT		(1 << 23)	/* else 8 bit */
+/* if serial */
+#define FLASH_ATMEL			(1 << 23)	/* else STM */
+
+#define FLASH_SIZE_MASK			(0x3 << 21)
+#define NAND_256M			(0x3 << 21)	/* and more */
+#define NAND_128M			(0x2 << 21)
+#define NAND_64M			(0x1 << 21)
+#define NAND_32M			(0x0 << 21)
+#define ATMEL_16M			(0x3 << 21)	/* and more */
+#define ATMEL_8M			(0x2 << 21)
+#define ATMEL_4M_2M			(0x1 << 21)
+#define ATMEL_1M			(0x0 << 21)	/* and less */
+#define STM_32M				(1 << 22)	/* and more */
+#define STM_16M				(0 << 22)	/* and less */
+
+#define FLASH_PARALLEL_HIGH_PIN_CNT	(1 << 20)	/* else low pin cnt */
+
+static const struct of_device_id syscon_match[] = {
+	{ .compatible = "cortina,gemini-syscon" },
+	{ },
+};
+
+int of_flash_probe_gemini(struct platform_device *pdev,
+			  struct device_node *np,
+			  struct map_info *map)
+{
+	struct regmap *rmap;
+	struct device *dev = &pdev->dev;
+	u32 val;
+	int ret;
+
+	/* Multiplatform guard */
+	if (!of_device_is_compatible(np, "cortina,gemini-flash"))
+		return 0;
+
+	rmap = syscon_regmap_lookup_by_phandle(np, "syscon");
+	if (IS_ERR(rmap)) {
+		dev_err(dev, "no syscon\n");
+		return PTR_ERR(rmap);
+	}
+
+	ret = regmap_read(rmap, GLOBAL_STATUS, &val);
+	if (ret) {
+		dev_err(dev, "failed to read global status register\n");
+		return -ENODEV;
+	}
+	dev_dbg(dev, "global status reg: %08x\n", val);
+
+	/*
+	 * It would be contradictory if a physmap flash was NOT parallel.
+	 */
+	if ((val & FLASH_TYPE_MASK) != FLASH_TYPE_PARALLEL) {
+		dev_err(dev, "flash is not parallel\n");
+		return -ENODEV;
+	}
+
+	/*
+	 * Complain if DT data and hardware definition is different.
+	 */
+	if (val & FLASH_WIDTH_16BIT) {
+		if (map->bankwidth != 2)
+			dev_warn(dev, "flash hardware say flash is 16 bit wide but DT says it is %d bits wide\n",
+				 map->bankwidth * 8);
+	} else {
+		if (map->bankwidth != 1)
+			dev_warn(dev, "flash hardware say flash is 8 bit wide but DT says it is %d bits wide\n",
+				 map->bankwidth * 8);
+	}
+
+	dev_info(&pdev->dev, "initialized Gemini-specific physmap control\n");
+
+	return 0;
+}