diff options
Diffstat (limited to 'drivers/net/ethernet/8390/ne.c')
| -rw-r--r-- | drivers/net/ethernet/8390/ne.c | 1001 |
1 files changed, 1001 insertions, 0 deletions
diff --git a/drivers/net/ethernet/8390/ne.c b/drivers/net/ethernet/8390/ne.c new file mode 100644 index 000000000..1c97e39b4 --- /dev/null +++ b/drivers/net/ethernet/8390/ne.c @@ -0,0 +1,1001 @@ +/* ne.c: A general non-shared-memory NS8390 ethernet driver for linux. */ +/* + Written 1992-94 by Donald Becker. + + Copyright 1993 United States Government as represented by the + Director, National Security Agency. + + This software may be used and distributed according to the terms + of the GNU General Public License, incorporated herein by reference. + + The author may be reached as becker@scyld.com, or C/O + Scyld Computing Corporation, 410 Severn Ave., Suite 210, Annapolis MD 21403 + + This driver should work with many programmed-I/O 8390-based ethernet + boards. Currently it supports the NE1000, NE2000, many clones, + and some Cabletron products. + + Changelog: + + Paul Gortmaker : use ENISR_RDC to monitor Tx PIO uploads, made + sanity checks and bad clone support optional. + Paul Gortmaker : new reset code, reset card after probe at boot. + Paul Gortmaker : multiple card support for module users. + Paul Gortmaker : Support for PCI ne2k clones, similar to lance.c + Paul Gortmaker : Allow users with bad cards to avoid full probe. + Paul Gortmaker : PCI probe changes, more PCI cards supported. + rjohnson@analogic.com : Changed init order so an interrupt will only + occur after memory is allocated for dev->priv. Deallocated memory + last in cleanup_modue() + Richard Guenther : Added support for ISAPnP cards + Paul Gortmaker : Discontinued PCI support - use ne2k-pci.c instead. + Hayato Fujiwara : Add m32r support. + +*/ + +/* Routines for the NatSemi-based designs (NE[12]000). */ + +static const char version1[] = +"ne.c:v1.10 9/23/94 Donald Becker (becker@scyld.com)\n"; +static const char version2[] = +"Last modified Nov 1, 2000 by Paul Gortmaker\n"; + + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/isapnp.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/delay.h> +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/jiffies.h> +#include <linux/platform_device.h> + +#include <asm/io.h> + +#include "8390.h" + +#define DRV_NAME "ne" + +/* Some defines that people can play with if so inclined. */ + +/* Do we support clones that don't adhere to 14,15 of the SAprom ? */ +#define SUPPORT_NE_BAD_CLONES +/* 0xbad = bad sig or no reset ack */ +#define BAD 0xbad + +#define MAX_NE_CARDS 4 /* Max number of NE cards per module */ +static struct platform_device *pdev_ne[MAX_NE_CARDS]; +static int io[MAX_NE_CARDS]; +static int irq[MAX_NE_CARDS]; +static int bad[MAX_NE_CARDS]; +static u32 ne_msg_enable; + +#ifdef MODULE +module_param_hw_array(io, int, ioport, NULL, 0); +module_param_hw_array(irq, int, irq, NULL, 0); +module_param_array(bad, int, NULL, 0); +module_param_named(msg_enable, ne_msg_enable, uint, 0444); +MODULE_PARM_DESC(io, "I/O base address(es),required"); +MODULE_PARM_DESC(irq, "IRQ number(s)"); +MODULE_PARM_DESC(bad, "Accept card(s) with bad signatures"); +MODULE_PARM_DESC(msg_enable, "Debug message level (see linux/netdevice.h for bitmap)"); +MODULE_DESCRIPTION("NE1000/NE2000 ISA/PnP Ethernet driver"); +MODULE_LICENSE("GPL"); +#endif /* MODULE */ + +/* Do we perform extra sanity checks on stuff ? */ +/* #define NE_SANITY_CHECK */ + +/* Do we implement the read before write bugfix ? */ +/* #define NE_RW_BUGFIX */ + +/* Do we have a non std. amount of memory? (in units of 256 byte pages) */ +/* #define PACKETBUF_MEMSIZE 0x40 */ + +/* This is set up so that no ISA autoprobe takes place. We can't guarantee +that the ne2k probe is the last 8390 based probe to take place (as it +is at boot) and so the probe will get confused by any other 8390 cards. +ISA device autoprobes on a running machine are not recommended anyway. */ +#if !defined(MODULE) && defined(CONFIG_ISA) +/* Do we need a portlist for the ISA auto-probe ? */ +#define NEEDS_PORTLIST +#endif + +/* A zero-terminated list of I/O addresses to be probed at boot. */ +#ifdef NEEDS_PORTLIST +static unsigned int netcard_portlist[] __initdata = { + 0x300, 0x280, 0x320, 0x340, 0x360, 0x380, 0 +}; +#endif + +static struct isapnp_device_id isapnp_clone_list[] __initdata = { + { ISAPNP_CARD_ID('A','X','E',0x2011), + ISAPNP_VENDOR('A','X','E'), ISAPNP_FUNCTION(0x2011), + (long) "NetGear EA201" }, + { ISAPNP_ANY_ID, ISAPNP_ANY_ID, + ISAPNP_VENDOR('E','D','I'), ISAPNP_FUNCTION(0x0216), + (long) "NN NE2000" }, + { ISAPNP_ANY_ID, ISAPNP_ANY_ID, + ISAPNP_VENDOR('P','N','P'), ISAPNP_FUNCTION(0x80d6), + (long) "Generic PNP" }, + { } /* terminate list */ +}; + +MODULE_DEVICE_TABLE(isapnp, isapnp_clone_list); + +#ifdef SUPPORT_NE_BAD_CLONES +/* A list of bad clones that we none-the-less recognize. */ +static struct { const char *name8, *name16; unsigned char SAprefix[4];} +bad_clone_list[] __initdata = { + {"DE100", "DE200", {0x00, 0xDE, 0x01,}}, + {"DE120", "DE220", {0x00, 0x80, 0xc8,}}, + {"DFI1000", "DFI2000", {'D', 'F', 'I',}}, /* Original, eh? */ + {"EtherNext UTP8", "EtherNext UTP16", {0x00, 0x00, 0x79}}, + {"NE1000","NE2000-invalid", {0x00, 0x00, 0xd8}}, /* Ancient real NE1000. */ + {"NN1000", "NN2000", {0x08, 0x03, 0x08}}, /* Outlaw no-name clone. */ + {"4-DIM8","4-DIM16", {0x00,0x00,0x4d,}}, /* Outlaw 4-Dimension cards. */ + {"Con-Intl_8", "Con-Intl_16", {0x00, 0x00, 0x24}}, /* Connect Int'nl */ + {"ET-100","ET-200", {0x00, 0x45, 0x54}}, /* YANG and YA clone */ + {"COMPEX","COMPEX16",{0x00,0x80,0x48}}, /* Broken ISA Compex cards */ + {"E-LAN100", "E-LAN200", {0x00, 0x00, 0x5d}}, /* Broken ne1000 clones */ + {"PCM-4823", "PCM-4823", {0x00, 0xc0, 0x6c}}, /* Broken Advantech MoBo */ + {"REALTEK", "RTL8019", {0x00, 0x00, 0xe8}}, /* no-name with Realtek chip */ +#ifdef CONFIG_MACH_TX49XX + {"RBHMA4X00-RTL8019", "RBHMA4X00-RTL8019", {0x00, 0x60, 0x0a}}, /* Toshiba built-in */ +#endif + {"LCS-8834", "LCS-8836", {0x04, 0x04, 0x37}}, /* ShinyNet (SET) */ + {NULL,} +}; +#endif + +/* ---- No user-serviceable parts below ---- */ + +#define NE_BASE (dev->base_addr) +#define NE_CMD 0x00 +#define NE_DATAPORT 0x10 /* NatSemi-defined port window offset. */ +#define NE_RESET 0x1f /* Issue a read to reset, a write to clear. */ +#define NE_IO_EXTENT 0x20 + +#define NE1SM_START_PG 0x20 /* First page of TX buffer */ +#define NE1SM_STOP_PG 0x40 /* Last page +1 of RX ring */ +#define NESM_START_PG 0x40 /* First page of TX buffer */ +#define NESM_STOP_PG 0x80 /* Last page +1 of RX ring */ + +#if defined(CONFIG_MACH_TX49XX) +# define DCR_VAL 0x48 /* 8-bit mode */ +#elif defined(CONFIG_ATARI) /* 8-bit mode on Atari, normal on Q40 */ +# define DCR_VAL (MACH_IS_ATARI ? 0x48 : 0x49) +#else +# define DCR_VAL 0x49 +#endif + +static int ne_probe1(struct net_device *dev, unsigned long ioaddr); +static int ne_probe_isapnp(struct net_device *dev); + +static void ne_reset_8390(struct net_device *dev); +static void ne_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr, + int ring_page); +static void ne_block_input(struct net_device *dev, int count, + struct sk_buff *skb, int ring_offset); +static void ne_block_output(struct net_device *dev, const int count, + const unsigned char *buf, const int start_page); + + +/* Probe for various non-shared-memory ethercards. + + NEx000-clone boards have a Station Address PROM (SAPROM) in the packet + buffer memory space. NE2000 clones have 0x57,0x57 in bytes 0x0e,0x0f of + the SAPROM, while other supposed NE2000 clones must be detected by their + SA prefix. + + Reading the SAPROM from a word-wide card with the 8390 set in byte-wide + mode results in doubled values, which can be detected and compensated for. + + The probe is also responsible for initializing the card and filling + in the 'dev' and 'ei_status' structures. + + We use the minimum memory size for some ethercard product lines, iff we can't + distinguish models. You can increase the packet buffer size by setting + PACKETBUF_MEMSIZE. Reported Cabletron packet buffer locations are: + E1010 starts at 0x100 and ends at 0x2000. + E1010-x starts at 0x100 and ends at 0x8000. ("-x" means "more memory") + E2010 starts at 0x100 and ends at 0x4000. + E2010-x starts at 0x100 and ends at 0xffff. */ + +static int __init do_ne_probe(struct net_device *dev) +{ + unsigned long base_addr = dev->base_addr; +#ifdef NEEDS_PORTLIST + int orig_irq = dev->irq; +#endif + + /* First check any supplied i/o locations. User knows best. <cough> */ + if (base_addr > 0x1ff) { /* Check a single specified location. */ + int ret = ne_probe1(dev, base_addr); + if (ret) + netdev_warn(dev, "ne.c: No NE*000 card found at " + "i/o = %#lx\n", base_addr); + return ret; + } + else if (base_addr != 0) /* Don't probe at all. */ + return -ENXIO; + + /* Then look for any installed ISAPnP clones */ + if (isapnp_present() && (ne_probe_isapnp(dev) == 0)) + return 0; + +#ifdef NEEDS_PORTLIST + /* Last resort. The semi-risky ISA auto-probe. */ + for (base_addr = 0; netcard_portlist[base_addr] != 0; base_addr++) { + int ioaddr = netcard_portlist[base_addr]; + dev->irq = orig_irq; + if (ne_probe1(dev, ioaddr) == 0) + return 0; + } +#endif + + return -ENODEV; +} + +static int __init ne_probe_isapnp(struct net_device *dev) +{ + int i; + + for (i = 0; isapnp_clone_list[i].vendor != 0; i++) { + struct pnp_dev *idev = NULL; + + while ((idev = pnp_find_dev(NULL, + isapnp_clone_list[i].vendor, + isapnp_clone_list[i].function, + idev))) { + /* Avoid already found cards from previous calls */ + if (pnp_device_attach(idev) < 0) + continue; + if (pnp_activate_dev(idev) < 0) { + pnp_device_detach(idev); + continue; + } + /* if no io and irq, search for next */ + if (!pnp_port_valid(idev, 0) || !pnp_irq_valid(idev, 0)) { + pnp_device_detach(idev); + continue; + } + /* found it */ + dev->base_addr = pnp_port_start(idev, 0); + dev->irq = pnp_irq(idev, 0); + netdev_info(dev, + "ne.c: ISAPnP reports %s at i/o %#lx, irq %d.\n", + (char *) isapnp_clone_list[i].driver_data, + dev->base_addr, dev->irq); + if (ne_probe1(dev, dev->base_addr) != 0) { /* Shouldn't happen. */ + netdev_err(dev, + "ne.c: Probe of ISAPnP card at %#lx failed.\n", + dev->base_addr); + pnp_device_detach(idev); + return -ENXIO; + } + ei_status.priv = (unsigned long)idev; + break; + } + if (!idev) + continue; + return 0; + } + + return -ENODEV; +} + +static int __init ne_probe1(struct net_device *dev, unsigned long ioaddr) +{ + int i; + unsigned char SA_prom[32]; + int wordlength = 2; + const char *name = NULL; + int start_page, stop_page; + int neX000, ctron, copam, bad_card; + int reg0, ret; + static unsigned version_printed; + struct ei_device *ei_local = netdev_priv(dev); + + if (!request_region(ioaddr, NE_IO_EXTENT, DRV_NAME)) + return -EBUSY; + + reg0 = inb_p(ioaddr); + if (reg0 == 0xFF) { + ret = -ENODEV; + goto err_out; + } + + /* Do a preliminary verification that we have a 8390. */ + { + int regd; + outb_p(E8390_NODMA+E8390_PAGE1+E8390_STOP, ioaddr + E8390_CMD); + regd = inb_p(ioaddr + 0x0d); + outb_p(0xff, ioaddr + 0x0d); + outb_p(E8390_NODMA+E8390_PAGE0, ioaddr + E8390_CMD); + inb_p(ioaddr + EN0_COUNTER0); /* Clear the counter by reading. */ + if (inb_p(ioaddr + EN0_COUNTER0) != 0) { + outb_p(reg0, ioaddr); + outb_p(regd, ioaddr + 0x0d); /* Restore the old values. */ + ret = -ENODEV; + goto err_out; + } + } + + if ((ne_msg_enable & NETIF_MSG_DRV) && (version_printed++ == 0)) + netdev_info(dev, "%s%s", version1, version2); + + netdev_info(dev, "NE*000 ethercard probe at %#3lx:", ioaddr); + + /* A user with a poor card that fails to ack the reset, or that + does not have a valid 0x57,0x57 signature can still use this + without having to recompile. Specifying an i/o address along + with an otherwise unused dev->mem_end value of "0xBAD" will + cause the driver to skip these parts of the probe. */ + + bad_card = ((dev->base_addr != 0) && (dev->mem_end == BAD)); + + /* Reset card. Who knows what dain-bramaged state it was left in. */ + + { + unsigned long reset_start_time = jiffies; + + /* DON'T change these to inb_p/outb_p or reset will fail on clones. */ + outb(inb(ioaddr + NE_RESET), ioaddr + NE_RESET); + + while ((inb_p(ioaddr + EN0_ISR) & ENISR_RESET) == 0) + if (time_after(jiffies, reset_start_time + 2*HZ/100)) { + if (bad_card) { + pr_cont(" (warning: no reset ack)"); + break; + } else { + pr_cont(" not found (no reset ack).\n"); + ret = -ENODEV; + goto err_out; + } + } + + outb_p(0xff, ioaddr + EN0_ISR); /* Ack all intr. */ + } + + /* Read the 16 bytes of station address PROM. + We must first initialize registers, similar to NS8390p_init(eifdev, 0). + We can't reliably read the SAPROM address without this. + (I learned the hard way!). */ + { + struct {unsigned char value, offset; } program_seq[] = + { + {E8390_NODMA+E8390_PAGE0+E8390_STOP, E8390_CMD}, /* Select page 0*/ + {0x48, EN0_DCFG}, /* Set byte-wide (0x48) access. */ + {0x00, EN0_RCNTLO}, /* Clear the count regs. */ + {0x00, EN0_RCNTHI}, + {0x00, EN0_IMR}, /* Mask completion irq. */ + {0xFF, EN0_ISR}, + {E8390_RXOFF, EN0_RXCR}, /* 0x20 Set to monitor */ + {E8390_TXOFF, EN0_TXCR}, /* 0x02 and loopback mode. */ + {32, EN0_RCNTLO}, + {0x00, EN0_RCNTHI}, + {0x00, EN0_RSARLO}, /* DMA starting at 0x0000. */ + {0x00, EN0_RSARHI}, + {E8390_RREAD+E8390_START, E8390_CMD}, + }; + + for (i = 0; i < ARRAY_SIZE(program_seq); i++) + outb_p(program_seq[i].value, ioaddr + program_seq[i].offset); + + } + for(i = 0; i < 32 /*sizeof(SA_prom)*/; i+=2) { + SA_prom[i] = inb(ioaddr + NE_DATAPORT); + SA_prom[i+1] = inb(ioaddr + NE_DATAPORT); + if (SA_prom[i] != SA_prom[i+1]) + wordlength = 1; + } + + if (wordlength == 2) + { + for (i = 0; i < 16; i++) + SA_prom[i] = SA_prom[i+i]; + /* We must set the 8390 for word mode. */ + outb_p(DCR_VAL, ioaddr + EN0_DCFG); + start_page = NESM_START_PG; + + /* + * Realtek RTL8019AS datasheet says that the PSTOP register + * shouldn't exceed 0x60 in 8-bit mode. + * This chip can be identified by reading the signature from + * the remote byte count registers (otherwise write-only)... + */ + if ((DCR_VAL & 0x01) == 0 && /* 8-bit mode */ + inb(ioaddr + EN0_RCNTLO) == 0x50 && + inb(ioaddr + EN0_RCNTHI) == 0x70) + stop_page = 0x60; + else + stop_page = NESM_STOP_PG; + } else { + start_page = NE1SM_START_PG; + stop_page = NE1SM_STOP_PG; + } + + neX000 = (SA_prom[14] == 0x57 && SA_prom[15] == 0x57); + ctron = (SA_prom[0] == 0x00 && SA_prom[1] == 0x00 && SA_prom[2] == 0x1d); + copam = (SA_prom[14] == 0x49 && SA_prom[15] == 0x00); + + /* Set up the rest of the parameters. */ + if (neX000 || bad_card || copam) { + name = (wordlength == 2) ? "NE2000" : "NE1000"; + } + else if (ctron) + { + name = (wordlength == 2) ? "Ctron-8" : "Ctron-16"; + start_page = 0x01; + stop_page = (wordlength == 2) ? 0x40 : 0x20; + } + else + { +#ifdef SUPPORT_NE_BAD_CLONES + /* Ack! Well, there might be a *bad* NE*000 clone there. + Check for total bogus addresses. */ + for (i = 0; bad_clone_list[i].name8; i++) + { + if (SA_prom[0] == bad_clone_list[i].SAprefix[0] && + SA_prom[1] == bad_clone_list[i].SAprefix[1] && + SA_prom[2] == bad_clone_list[i].SAprefix[2]) + { + if (wordlength == 2) + { + name = bad_clone_list[i].name16; + } else { + name = bad_clone_list[i].name8; + } + break; + } + } + if (bad_clone_list[i].name8 == NULL) + { + pr_cont(" not found (invalid signature %2.2x %2.2x).\n", + SA_prom[14], SA_prom[15]); + ret = -ENXIO; + goto err_out; + } +#else + pr_cont(" not found.\n"); + ret = -ENXIO; + goto err_out; +#endif + } + + if (dev->irq < 2) + { + unsigned long cookie = probe_irq_on(); + outb_p(0x50, ioaddr + EN0_IMR); /* Enable one interrupt. */ + outb_p(0x00, ioaddr + EN0_RCNTLO); + outb_p(0x00, ioaddr + EN0_RCNTHI); + outb_p(E8390_RREAD+E8390_START, ioaddr); /* Trigger it... */ + mdelay(10); /* wait 10ms for interrupt to propagate */ + outb_p(0x00, ioaddr + EN0_IMR); /* Mask it again. */ + dev->irq = probe_irq_off(cookie); + if (ne_msg_enable & NETIF_MSG_PROBE) + pr_cont(" autoirq is %d", dev->irq); + } else if (dev->irq == 2) + /* Fixup for users that don't know that IRQ 2 is really IRQ 9, + or don't know which one to set. */ + dev->irq = 9; + + if (! dev->irq) { + pr_cont(" failed to detect IRQ line.\n"); + ret = -EAGAIN; + goto err_out; + } + + /* Snarf the interrupt now. There's no point in waiting since we cannot + share and the board will usually be enabled. */ + ret = request_irq(dev->irq, eip_interrupt, 0, name, dev); + if (ret) { + pr_cont(" unable to get IRQ %d (errno=%d).\n", dev->irq, ret); + goto err_out; + } + + dev->base_addr = ioaddr; + + for (i = 0; i < ETH_ALEN; i++) { + dev->dev_addr[i] = SA_prom[i]; + } + + pr_cont("%pM\n", dev->dev_addr); + + ei_status.name = name; + ei_status.tx_start_page = start_page; + ei_status.stop_page = stop_page; + + /* Use 16-bit mode only if this wasn't overridden by DCR_VAL */ + ei_status.word16 = (wordlength == 2 && (DCR_VAL & 0x01)); + + ei_status.rx_start_page = start_page + TX_PAGES; +#ifdef PACKETBUF_MEMSIZE + /* Allow the packet buffer size to be overridden by know-it-alls. */ + ei_status.stop_page = ei_status.tx_start_page + PACKETBUF_MEMSIZE; +#endif + + ei_status.reset_8390 = &ne_reset_8390; + ei_status.block_input = &ne_block_input; + ei_status.block_output = &ne_block_output; + ei_status.get_8390_hdr = &ne_get_8390_hdr; + ei_status.priv = 0; + + dev->netdev_ops = &eip_netdev_ops; + NS8390p_init(dev, 0); + + ei_local->msg_enable = ne_msg_enable; + ret = register_netdev(dev); + if (ret) + goto out_irq; + netdev_info(dev, "%s found at %#lx, using IRQ %d.\n", + name, ioaddr, dev->irq); + return 0; + +out_irq: + free_irq(dev->irq, dev); +err_out: + release_region(ioaddr, NE_IO_EXTENT); + return ret; +} + +/* Hard reset the card. This used to pause for the same period that a + 8390 reset command required, but that shouldn't be necessary. */ + +static void ne_reset_8390(struct net_device *dev) +{ + unsigned long reset_start_time = jiffies; + struct ei_device *ei_local = netdev_priv(dev); + + netif_dbg(ei_local, hw, dev, "resetting the 8390 t=%ld...\n", jiffies); + + /* DON'T change these to inb_p/outb_p or reset will fail on clones. */ + outb(inb(NE_BASE + NE_RESET), NE_BASE + NE_RESET); + + ei_status.txing = 0; + ei_status.dmaing = 0; + + /* This check _should_not_ be necessary, omit eventually. */ + while ((inb_p(NE_BASE+EN0_ISR) & ENISR_RESET) == 0) + if (time_after(jiffies, reset_start_time + 2*HZ/100)) { + netdev_err(dev, "ne_reset_8390() did not complete.\n"); + break; + } + outb_p(ENISR_RESET, NE_BASE + EN0_ISR); /* Ack intr. */ +} + +/* Grab the 8390 specific header. Similar to the block_input routine, but + we don't need to be concerned with ring wrap as the header will be at + the start of a page, so we optimize accordingly. */ + +static void ne_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr, int ring_page) +{ + int nic_base = dev->base_addr; + + /* This *shouldn't* happen. If it does, it's the last thing you'll see */ + + if (ei_status.dmaing) + { + netdev_err(dev, "DMAing conflict in ne_get_8390_hdr " + "[DMAstat:%d][irqlock:%d].\n", + ei_status.dmaing, ei_status.irqlock); + return; + } + + ei_status.dmaing |= 0x01; + outb_p(E8390_NODMA+E8390_PAGE0+E8390_START, nic_base+ NE_CMD); + outb_p(sizeof(struct e8390_pkt_hdr), nic_base + EN0_RCNTLO); + outb_p(0, nic_base + EN0_RCNTHI); + outb_p(0, nic_base + EN0_RSARLO); /* On page boundary */ + outb_p(ring_page, nic_base + EN0_RSARHI); + outb_p(E8390_RREAD+E8390_START, nic_base + NE_CMD); + + if (ei_status.word16) + insw(NE_BASE + NE_DATAPORT, hdr, sizeof(struct e8390_pkt_hdr)>>1); + else + insb(NE_BASE + NE_DATAPORT, hdr, sizeof(struct e8390_pkt_hdr)); + + outb_p(ENISR_RDC, nic_base + EN0_ISR); /* Ack intr. */ + ei_status.dmaing &= ~0x01; + + le16_to_cpus(&hdr->count); +} + +/* Block input and output, similar to the Crynwr packet driver. If you + are porting to a new ethercard, look at the packet driver source for hints. + The NEx000 doesn't share the on-board packet memory -- you have to put + the packet out through the "remote DMA" dataport using outb. */ + +static void ne_block_input(struct net_device *dev, int count, struct sk_buff *skb, int ring_offset) +{ +#ifdef NE_SANITY_CHECK + int xfer_count = count; + struct ei_device *ei_local = netdev_priv(dev); +#endif + int nic_base = dev->base_addr; + char *buf = skb->data; + + /* This *shouldn't* happen. If it does, it's the last thing you'll see */ + if (ei_status.dmaing) + { + netdev_err(dev, "DMAing conflict in ne_block_input " + "[DMAstat:%d][irqlock:%d].\n", + ei_status.dmaing, ei_status.irqlock); + return; + } + ei_status.dmaing |= 0x01; + outb_p(E8390_NODMA+E8390_PAGE0+E8390_START, nic_base+ NE_CMD); + outb_p(count & 0xff, nic_base + EN0_RCNTLO); + outb_p(count >> 8, nic_base + EN0_RCNTHI); + outb_p(ring_offset & 0xff, nic_base + EN0_RSARLO); + outb_p(ring_offset >> 8, nic_base + EN0_RSARHI); + outb_p(E8390_RREAD+E8390_START, nic_base + NE_CMD); + if (ei_status.word16) + { + insw(NE_BASE + NE_DATAPORT,buf,count>>1); + if (count & 0x01) + { + buf[count-1] = inb(NE_BASE + NE_DATAPORT); +#ifdef NE_SANITY_CHECK + xfer_count++; +#endif + } + } else { + insb(NE_BASE + NE_DATAPORT, buf, count); + } + +#ifdef NE_SANITY_CHECK + /* This was for the ALPHA version only, but enough people have + been encountering problems so it is still here. If you see + this message you either 1) have a slightly incompatible clone + or 2) have noise/speed problems with your bus. */ + + if (netif_msg_rx_status(ei_local)) + { + /* DMA termination address check... */ + int addr, tries = 20; + do { + /* DON'T check for 'inb_p(EN0_ISR) & ENISR_RDC' here + -- it's broken for Rx on some cards! */ + int high = inb_p(nic_base + EN0_RSARHI); + int low = inb_p(nic_base + EN0_RSARLO); + addr = (high << 8) + low; + if (((ring_offset + xfer_count) & 0xff) == low) + break; + } while (--tries > 0); + if (tries <= 0) + netdev_warn(dev, "RX transfer address mismatch," + "%#4.4x (expected) vs. %#4.4x (actual).\n", + ring_offset + xfer_count, addr); + } +#endif + outb_p(ENISR_RDC, nic_base + EN0_ISR); /* Ack intr. */ + ei_status.dmaing &= ~0x01; +} + +static void ne_block_output(struct net_device *dev, int count, + const unsigned char *buf, const int start_page) +{ + int nic_base = NE_BASE; + unsigned long dma_start; +#ifdef NE_SANITY_CHECK + int retries = 0; + struct ei_device *ei_local = netdev_priv(dev); +#endif + + /* Round the count up for word writes. Do we need to do this? + What effect will an odd byte count have on the 8390? + I should check someday. */ + + if (ei_status.word16 && (count & 0x01)) + count++; + + /* This *shouldn't* happen. If it does, it's the last thing you'll see */ + if (ei_status.dmaing) + { + netdev_err(dev, "DMAing conflict in ne_block_output." + "[DMAstat:%d][irqlock:%d]\n", + ei_status.dmaing, ei_status.irqlock); + return; + } + ei_status.dmaing |= 0x01; + /* We should already be in page 0, but to be safe... */ + outb_p(E8390_PAGE0+E8390_START+E8390_NODMA, nic_base + NE_CMD); + +#ifdef NE_SANITY_CHECK +retry: +#endif + +#ifdef NE8390_RW_BUGFIX + /* Handle the read-before-write bug the same way as the + Crynwr packet driver -- the NatSemi method doesn't work. + Actually this doesn't always work either, but if you have + problems with your NEx000 this is better than nothing! */ + + outb_p(0x42, nic_base + EN0_RCNTLO); + outb_p(0x00, nic_base + EN0_RCNTHI); + outb_p(0x42, nic_base + EN0_RSARLO); + outb_p(0x00, nic_base + EN0_RSARHI); + outb_p(E8390_RREAD+E8390_START, nic_base + NE_CMD); + /* Make certain that the dummy read has occurred. */ + udelay(6); +#endif + + outb_p(ENISR_RDC, nic_base + EN0_ISR); + + /* Now the normal output. */ + outb_p(count & 0xff, nic_base + EN0_RCNTLO); + outb_p(count >> 8, nic_base + EN0_RCNTHI); + outb_p(0x00, nic_base + EN0_RSARLO); + outb_p(start_page, nic_base + EN0_RSARHI); + + outb_p(E8390_RWRITE+E8390_START, nic_base + NE_CMD); + if (ei_status.word16) { + outsw(NE_BASE + NE_DATAPORT, buf, count>>1); + } else { + outsb(NE_BASE + NE_DATAPORT, buf, count); + } + + dma_start = jiffies; + +#ifdef NE_SANITY_CHECK + /* This was for the ALPHA version only, but enough people have + been encountering problems so it is still here. */ + + if (netif_msg_tx_queued(ei_local)) + { + /* DMA termination address check... */ + int addr, tries = 20; + do { + int high = inb_p(nic_base + EN0_RSARHI); + int low = inb_p(nic_base + EN0_RSARLO); + addr = (high << 8) + low; + if ((start_page << 8) + count == addr) + break; + } while (--tries > 0); + + if (tries <= 0) + { + netdev_warn(dev, "Tx packet transfer address mismatch," + "%#4.4x (expected) vs. %#4.4x (actual).\n", + (start_page << 8) + count, addr); + if (retries++ == 0) + goto retry; + } + } +#endif + + while ((inb_p(nic_base + EN0_ISR) & ENISR_RDC) == 0) + if (time_after(jiffies, dma_start + 2*HZ/100)) { /* 20ms */ + netdev_warn(dev, "timeout waiting for Tx RDC.\n"); + ne_reset_8390(dev); + NS8390p_init(dev, 1); + break; + } + + outb_p(ENISR_RDC, nic_base + EN0_ISR); /* Ack intr. */ + ei_status.dmaing &= ~0x01; +} + +static int __init ne_drv_probe(struct platform_device *pdev) +{ + struct net_device *dev; + int err, this_dev = pdev->id; + struct resource *res; + + dev = alloc_eip_netdev(); + if (!dev) + return -ENOMEM; + + /* ne.c doesn't populate resources in platform_device, but + * rbtx4927_ne_init and rbtx4938_ne_init do register devices + * with resources. + */ + res = platform_get_resource(pdev, IORESOURCE_IO, 0); + if (res) { + dev->base_addr = res->start; + dev->irq = platform_get_irq(pdev, 0); + } else { + if (this_dev < 0 || this_dev >= MAX_NE_CARDS) { + free_netdev(dev); + return -EINVAL; + } + dev->base_addr = io[this_dev]; + dev->irq = irq[this_dev]; + dev->mem_end = bad[this_dev]; + } + SET_NETDEV_DEV(dev, &pdev->dev); + err = do_ne_probe(dev); + if (err) { + free_netdev(dev); + return err; + } + platform_set_drvdata(pdev, dev); + + /* Update with any values found by probing, don't update if + * resources were specified. + */ + if (!res) { + io[this_dev] = dev->base_addr; + irq[this_dev] = dev->irq; + } + return 0; +} + +static int ne_drv_remove(struct platform_device *pdev) +{ + struct net_device *dev = platform_get_drvdata(pdev); + + if (dev) { + struct pnp_dev *idev = (struct pnp_dev *)ei_status.priv; + netif_device_detach(dev); + unregister_netdev(dev); + if (idev) + pnp_device_detach(idev); + /* Careful ne_drv_remove can be called twice, once from + * the platform_driver.remove and again when the + * platform_device is being removed. + */ + ei_status.priv = 0; + free_irq(dev->irq, dev); + release_region(dev->base_addr, NE_IO_EXTENT); + free_netdev(dev); + } + return 0; +} + +/* Remove unused devices or all if true. */ +static void ne_loop_rm_unreg(int all) +{ + int this_dev; + struct platform_device *pdev; + for (this_dev = 0; this_dev < MAX_NE_CARDS; this_dev++) { + pdev = pdev_ne[this_dev]; + /* No network device == unused */ + if (pdev && (!platform_get_drvdata(pdev) || all)) { + ne_drv_remove(pdev); + platform_device_unregister(pdev); + pdev_ne[this_dev] = NULL; + } + } +} + +#ifdef CONFIG_PM +static int ne_drv_suspend(struct platform_device *pdev, pm_message_t state) +{ + struct net_device *dev = platform_get_drvdata(pdev); + + if (netif_running(dev)) { + struct pnp_dev *idev = (struct pnp_dev *)ei_status.priv; + netif_device_detach(dev); + if (idev) + pnp_stop_dev(idev); + } + return 0; +} + +static int ne_drv_resume(struct platform_device *pdev) +{ + struct net_device *dev = platform_get_drvdata(pdev); + + if (netif_running(dev)) { + struct pnp_dev *idev = (struct pnp_dev *)ei_status.priv; + if (idev) + pnp_start_dev(idev); + ne_reset_8390(dev); + NS8390p_init(dev, 1); + netif_device_attach(dev); + } + return 0; +} +#else +#define ne_drv_suspend NULL +#define ne_drv_resume NULL +#endif + +static struct platform_driver ne_driver = { + .remove = ne_drv_remove, + .suspend = ne_drv_suspend, + .resume = ne_drv_resume, + .driver = { + .name = DRV_NAME, + }, +}; + +static void __init ne_add_devices(void) +{ + int this_dev; + struct platform_device *pdev; + + for (this_dev = 0; this_dev < MAX_NE_CARDS; this_dev++) { + if (pdev_ne[this_dev]) + continue; + pdev = platform_device_register_simple( + DRV_NAME, this_dev, NULL, 0); + if (IS_ERR(pdev)) + continue; + pdev_ne[this_dev] = pdev; + } +} + +#ifdef MODULE +int __init init_module(void) +{ + int retval; + ne_add_devices(); + retval = platform_driver_probe(&ne_driver, ne_drv_probe); + if (retval) { + if (io[0] == 0) + pr_notice("ne.c: You must supply \"io=0xNNN\"" + " value(s) for ISA cards.\n"); + ne_loop_rm_unreg(1); + return retval; + } + + /* Unregister unused platform_devices. */ + ne_loop_rm_unreg(0); + return retval; +} +#else /* MODULE */ +static int __init ne_init(void) +{ + int retval = platform_driver_probe(&ne_driver, ne_drv_probe); + + /* Unregister unused platform_devices. */ + ne_loop_rm_unreg(0); + return retval; +} +module_init(ne_init); + +struct net_device * __init ne_probe(int unit) +{ + int this_dev; + struct net_device *dev; + + /* Find an empty slot, that is no net_device and zero io port. */ + this_dev = 0; + while ((pdev_ne[this_dev] && platform_get_drvdata(pdev_ne[this_dev])) || + io[this_dev]) { + if (++this_dev == MAX_NE_CARDS) + return ERR_PTR(-ENOMEM); + } + + /* Get irq, io from kernel command line */ + dev = alloc_eip_netdev(); + if (!dev) + return ERR_PTR(-ENOMEM); + + sprintf(dev->name, "eth%d", unit); + netdev_boot_setup_check(dev); + + io[this_dev] = dev->base_addr; + irq[this_dev] = dev->irq; + bad[this_dev] = dev->mem_end; + + free_netdev(dev); + + ne_add_devices(); + + /* return the first device found */ + for (this_dev = 0; this_dev < MAX_NE_CARDS; this_dev++) { + if (pdev_ne[this_dev]) { + dev = platform_get_drvdata(pdev_ne[this_dev]); + if (dev) + return dev; + } + } + + return ERR_PTR(-ENODEV); +} +#endif /* MODULE */ + +static void __exit ne_exit(void) +{ + platform_driver_unregister(&ne_driver); + ne_loop_rm_unreg(1); +} +module_exit(ne_exit); |