diff options
Diffstat (limited to 'drivers/net/ethernet/broadcom/Kconfig')
| -rw-r--r-- | drivers/net/ethernet/broadcom/Kconfig | 241 |
1 files changed, 241 insertions, 0 deletions
diff --git a/drivers/net/ethernet/broadcom/Kconfig b/drivers/net/ethernet/broadcom/Kconfig new file mode 100644 index 000000000..c1d3ee9ba --- /dev/null +++ b/drivers/net/ethernet/broadcom/Kconfig @@ -0,0 +1,241 @@ +# +# Broadcom device configuration +# + +config NET_VENDOR_BROADCOM + bool "Broadcom devices" + default y + depends on (SSB_POSSIBLE && HAS_DMA) || PCI || BCM63XX || \ + SIBYTE_SB1xxx_SOC + ---help--- + If you have a network (Ethernet) chipset belonging to this class, + say Y. + + Note that the answer to this question does not directly affect + the kernel: saying N will just case the configurator to skip all + the questions regarding AMD chipsets. If you say Y, you will be asked + for your specific chipset/driver in the following questions. + +if NET_VENDOR_BROADCOM + +config B44 + tristate "Broadcom 440x/47xx ethernet support" + depends on SSB_POSSIBLE && HAS_DMA + select SSB + select MII + select PHYLIB + ---help--- + If you have a network (Ethernet) controller of this type, say Y + or M here. + + To compile this driver as a module, choose M here. The module + will be called b44. + +# Auto-select SSB PCI-HOST support, if possible +config B44_PCI_AUTOSELECT + bool + depends on B44 && SSB_PCIHOST_POSSIBLE + select SSB_PCIHOST + default y + +# Auto-select SSB PCICORE driver, if possible +config B44_PCICORE_AUTOSELECT + bool + depends on B44 && SSB_DRIVER_PCICORE_POSSIBLE + select SSB_DRIVER_PCICORE + default y + +config B44_PCI + bool + depends on B44_PCI_AUTOSELECT && B44_PCICORE_AUTOSELECT + default y + +config BCM63XX_ENET + tristate "Broadcom 63xx internal mac support" + depends on BCM63XX + select MII + select PHYLIB + help + This driver supports the ethernet MACs in the Broadcom 63xx + MIPS chipset family (BCM63XX). + +config BCMGENET + tristate "Broadcom GENET internal MAC support" + depends on HAS_IOMEM + select MII + select PHYLIB + select FIXED_PHY + select BCM7XXX_PHY + select MDIO_BCM_UNIMAC + help + This driver supports the built-in Ethernet MACs found in the + Broadcom BCM7xxx Set Top Box family chipset. + +config BNX2 + tristate "QLogic bnx2 support" + depends on PCI + select CRC32 + select FW_LOADER + ---help--- + This driver supports QLogic bnx2 gigabit Ethernet cards. + + To compile this driver as a module, choose M here: the module + will be called bnx2. This is recommended. + +config CNIC + tristate "QLogic CNIC support" + depends on PCI && (IPV6 || IPV6=n) + select BNX2 + select UIO + ---help--- + This driver supports offload features of QLogic bnx2 gigabit + Ethernet cards. + + To compile this driver as a module, choose M here: the module + will be called cnic. This is recommended. + +config SB1250_MAC + tristate "SB1250 Gigabit Ethernet support" + depends on SIBYTE_SB1xxx_SOC + select PHYLIB + ---help--- + This driver supports Gigabit Ethernet interfaces based on the + Broadcom SiByte family of System-On-a-Chip parts. They include + the BCM1120, BCM1125, BCM1125H, BCM1250, BCM1255, BCM1280, BCM1455 + and BCM1480 chips. + + To compile this driver as a module, choose M here: the module + will be called sb1250-mac. + +config TIGON3 + tristate "Broadcom Tigon3 support" + depends on PCI + select PHYLIB + imply PTP_1588_CLOCK + ---help--- + This driver supports Broadcom Tigon3 based gigabit Ethernet cards. + + To compile this driver as a module, choose M here: the module + will be called tg3. This is recommended. + +config TIGON3_HWMON + bool "Broadcom Tigon3 HWMON support" + default y + depends on TIGON3 && HWMON && !(TIGON3=y && HWMON=m) + ---help--- + Say Y if you want to expose the thermal sensor on Tigon3 devices. + +config BNX2X + tristate "Broadcom NetXtremeII 10Gb support" + depends on PCI + imply PTP_1588_CLOCK + select FW_LOADER + select ZLIB_INFLATE + select LIBCRC32C + select MDIO + ---help--- + This driver supports Broadcom NetXtremeII 10 gigabit Ethernet cards. + To compile this driver as a module, choose M here: the module + will be called bnx2x. This is recommended. + +config BNX2X_SRIOV + bool "Broadcom 578xx and 57712 SR-IOV support" + depends on BNX2X && PCI_IOV + default y + ---help--- + This configuration parameter enables Single Root Input Output + Virtualization support in the 578xx and 57712 products. This + allows for virtual function acceleration in virtual environments. + +config BGMAC + tristate + help + This enables the integrated ethernet controller support for many + Broadcom (mostly iProc) SoCs. An appropriate bus interface driver + needs to be enabled to select this. + +config BGMAC_BCMA + tristate "Broadcom iProc GBit BCMA support" + depends on BCMA && BCMA_HOST_SOC + depends on BCM47XX || ARCH_BCM_5301X || COMPILE_TEST + select BGMAC + select PHYLIB + select FIXED_PHY + ---help--- + This driver supports GBit MAC and BCM4706 GBit MAC cores on BCMA bus. + They can be found on BCM47xx SoCs and provide gigabit ethernet. + In case of using this driver on BCM4706 it's also requires to enable + BCMA_DRIVER_GMAC_CMN to make it work. + +config BGMAC_PLATFORM + tristate "Broadcom iProc GBit platform support" + depends on ARCH_BCM_IPROC || COMPILE_TEST + depends on OF + select BGMAC + select PHYLIB + select FIXED_PHY + default ARCH_BCM_IPROC + ---help--- + Say Y here if you want to use the Broadcom iProc Gigabit Ethernet + controller through the generic platform interface + +config SYSTEMPORT + tristate "Broadcom SYSTEMPORT internal MAC support" + depends on HAS_IOMEM + depends on NET_DSA || !NET_DSA + select MII + select PHYLIB + select FIXED_PHY + help + This driver supports the built-in Ethernet MACs found in the + Broadcom BCM7xxx Set Top Box family chipset using an internal + Ethernet switch. + +config BNXT + tristate "Broadcom NetXtreme-C/E support" + depends on PCI + depends on MAY_USE_DEVLINK + select FW_LOADER + select LIBCRC32C + ---help--- + This driver supports Broadcom NetXtreme-C/E 10/25/40/50 gigabit + Ethernet cards. To compile this driver as a module, choose M here: + the module will be called bnxt_en. This is recommended. + +config BNXT_SRIOV + bool "Broadcom NetXtreme-C/E SR-IOV support" + depends on BNXT && PCI_IOV + default y + ---help--- + This configuration parameter enables Single Root Input Output + Virtualization support in the NetXtreme-C/E products. This + allows for virtual function acceleration in virtual environments. + +config BNXT_FLOWER_OFFLOAD + bool "TC Flower offload support for NetXtreme-C/E" + depends on BNXT + default y + ---help--- + This configuration parameter enables TC Flower packet classifier + offload for eswitch. This option enables SR-IOV switchdev eswitch + offload. + +config BNXT_DCB + bool "Data Center Bridging (DCB) Support" + default n + depends on BNXT && DCB + ---help--- + Say Y here if you want to use Data Center Bridging (DCB) in the + driver. + + If unsure, say N. + +config BNXT_HWMON + bool "Broadcom NetXtreme-C/E HWMON support" + default y + depends on BNXT && HWMON && !(BNXT=y && HWMON=m) + ---help--- + Say Y if you want to expose the thermal sensor data on NetXtreme-C/E + devices, via the hwmon sysfs interface. + +endif # NET_VENDOR_BROADCOM |