diff options
Diffstat (limited to 'drivers/net/ethernet/intel/fm10k/fm10k_vf.c')
| -rw-r--r-- | drivers/net/ethernet/intel/fm10k/fm10k_vf.c | 527 |
1 files changed, 527 insertions, 0 deletions
diff --git a/drivers/net/ethernet/intel/fm10k/fm10k_vf.c b/drivers/net/ethernet/intel/fm10k/fm10k_vf.c new file mode 100644 index 000000000..a8519c1f0 --- /dev/null +++ b/drivers/net/ethernet/intel/fm10k/fm10k_vf.c @@ -0,0 +1,527 @@ +// SPDX-License-Identifier: GPL-2.0 +/* Copyright(c) 2013 - 2018 Intel Corporation. */ + +#include "fm10k_vf.h" + +/** + * fm10k_stop_hw_vf - Stop Tx/Rx units + * @hw: pointer to hardware structure + * + **/ +static s32 fm10k_stop_hw_vf(struct fm10k_hw *hw) +{ + u8 *perm_addr = hw->mac.perm_addr; + u32 bal = 0, bah = 0, tdlen; + s32 err; + u16 i; + + /* we need to disable the queues before taking further steps */ + err = fm10k_stop_hw_generic(hw); + if (err && err != FM10K_ERR_REQUESTS_PENDING) + return err; + + /* If permanent address is set then we need to restore it */ + if (is_valid_ether_addr(perm_addr)) { + bal = (((u32)perm_addr[3]) << 24) | + (((u32)perm_addr[4]) << 16) | + (((u32)perm_addr[5]) << 8); + bah = (((u32)0xFF) << 24) | + (((u32)perm_addr[0]) << 16) | + (((u32)perm_addr[1]) << 8) | + ((u32)perm_addr[2]); + } + + /* restore default itr_scale for next VF initialization */ + tdlen = hw->mac.itr_scale << FM10K_TDLEN_ITR_SCALE_SHIFT; + + /* The queues have already been disabled so we just need to + * update their base address registers + */ + for (i = 0; i < hw->mac.max_queues; i++) { + fm10k_write_reg(hw, FM10K_TDBAL(i), bal); + fm10k_write_reg(hw, FM10K_TDBAH(i), bah); + fm10k_write_reg(hw, FM10K_RDBAL(i), bal); + fm10k_write_reg(hw, FM10K_RDBAH(i), bah); + /* Restore ITR scale in software-defined mechanism in TDLEN + * for next VF initialization. See definition of + * FM10K_TDLEN_ITR_SCALE_SHIFT for more details on the use of + * TDLEN here. + */ + fm10k_write_reg(hw, FM10K_TDLEN(i), tdlen); + } + + return err; +} + +/** + * fm10k_reset_hw_vf - VF hardware reset + * @hw: pointer to hardware structure + * + * This function should return the hardware to a state similar to the + * one it is in after just being initialized. + **/ +static s32 fm10k_reset_hw_vf(struct fm10k_hw *hw) +{ + s32 err; + + /* shut down queues we own and reset DMA configuration */ + err = fm10k_stop_hw_vf(hw); + if (err == FM10K_ERR_REQUESTS_PENDING) + hw->mac.reset_while_pending++; + else if (err) + return err; + + /* Inititate VF reset */ + fm10k_write_reg(hw, FM10K_VFCTRL, FM10K_VFCTRL_RST); + + /* Flush write and allow 100us for reset to complete */ + fm10k_write_flush(hw); + udelay(FM10K_RESET_TIMEOUT); + + /* Clear reset bit and verify it was cleared */ + fm10k_write_reg(hw, FM10K_VFCTRL, 0); + if (fm10k_read_reg(hw, FM10K_VFCTRL) & FM10K_VFCTRL_RST) + return FM10K_ERR_RESET_FAILED; + + return 0; +} + +/** + * fm10k_init_hw_vf - VF hardware initialization + * @hw: pointer to hardware structure + * + **/ +static s32 fm10k_init_hw_vf(struct fm10k_hw *hw) +{ + u32 tqdloc, tqdloc0 = ~fm10k_read_reg(hw, FM10K_TQDLOC(0)); + s32 err; + u16 i; + + /* verify we have at least 1 queue */ + if (!~fm10k_read_reg(hw, FM10K_TXQCTL(0)) || + !~fm10k_read_reg(hw, FM10K_RXQCTL(0))) { + err = FM10K_ERR_NO_RESOURCES; + goto reset_max_queues; + } + + /* determine how many queues we have */ + for (i = 1; tqdloc0 && (i < FM10K_MAX_QUEUES_POOL); i++) { + /* verify the Descriptor cache offsets are increasing */ + tqdloc = ~fm10k_read_reg(hw, FM10K_TQDLOC(i)); + if (!tqdloc || (tqdloc == tqdloc0)) + break; + + /* check to verify the PF doesn't own any of our queues */ + if (!~fm10k_read_reg(hw, FM10K_TXQCTL(i)) || + !~fm10k_read_reg(hw, FM10K_RXQCTL(i))) + break; + } + + /* shut down queues we own and reset DMA configuration */ + err = fm10k_disable_queues_generic(hw, i); + if (err) + goto reset_max_queues; + + /* record maximum queue count */ + hw->mac.max_queues = i; + + /* fetch default VLAN and ITR scale */ + hw->mac.default_vid = (fm10k_read_reg(hw, FM10K_TXQCTL(0)) & + FM10K_TXQCTL_VID_MASK) >> FM10K_TXQCTL_VID_SHIFT; + /* Read the ITR scale from TDLEN. See the definition of + * FM10K_TDLEN_ITR_SCALE_SHIFT for more information about how TDLEN is + * used here. + */ + hw->mac.itr_scale = (fm10k_read_reg(hw, FM10K_TDLEN(0)) & + FM10K_TDLEN_ITR_SCALE_MASK) >> + FM10K_TDLEN_ITR_SCALE_SHIFT; + + return 0; + +reset_max_queues: + hw->mac.max_queues = 0; + + return err; +} + +/* This structure defines the attibutes to be parsed below */ +const struct fm10k_tlv_attr fm10k_mac_vlan_msg_attr[] = { + FM10K_TLV_ATTR_U32(FM10K_MAC_VLAN_MSG_VLAN), + FM10K_TLV_ATTR_BOOL(FM10K_MAC_VLAN_MSG_SET), + FM10K_TLV_ATTR_MAC_ADDR(FM10K_MAC_VLAN_MSG_MAC), + FM10K_TLV_ATTR_MAC_ADDR(FM10K_MAC_VLAN_MSG_DEFAULT_MAC), + FM10K_TLV_ATTR_MAC_ADDR(FM10K_MAC_VLAN_MSG_MULTICAST), + FM10K_TLV_ATTR_LAST +}; + +/** + * fm10k_update_vlan_vf - Update status of VLAN ID in VLAN filter table + * @hw: pointer to hardware structure + * @vid: VLAN ID to add to table + * @vsi: Reserved, should always be 0 + * @set: Indicates if this is a set or clear operation + * + * This function adds or removes the corresponding VLAN ID from the VLAN + * filter table for this VF. + **/ +static s32 fm10k_update_vlan_vf(struct fm10k_hw *hw, u32 vid, u8 vsi, bool set) +{ + struct fm10k_mbx_info *mbx = &hw->mbx; + u32 msg[4]; + + /* verify the index is not set */ + if (vsi) + return FM10K_ERR_PARAM; + + /* clever trick to verify reserved bits in both vid and length */ + if ((vid << 16 | vid) >> 28) + return FM10K_ERR_PARAM; + + /* encode set bit into the VLAN ID */ + if (!set) + vid |= FM10K_VLAN_CLEAR; + + /* generate VLAN request */ + fm10k_tlv_msg_init(msg, FM10K_VF_MSG_ID_MAC_VLAN); + fm10k_tlv_attr_put_u32(msg, FM10K_MAC_VLAN_MSG_VLAN, vid); + + /* load onto outgoing mailbox */ + return mbx->ops.enqueue_tx(hw, mbx, msg); +} + +/** + * fm10k_msg_mac_vlan_vf - Read device MAC address from mailbox message + * @hw: pointer to the HW structure + * @results: Attributes for message + * @mbx: unused mailbox data + * + * This function should determine the MAC address for the VF + **/ +s32 fm10k_msg_mac_vlan_vf(struct fm10k_hw *hw, u32 **results, + struct fm10k_mbx_info *mbx) +{ + u8 perm_addr[ETH_ALEN]; + u16 vid; + s32 err; + + /* record MAC address requested */ + err = fm10k_tlv_attr_get_mac_vlan( + results[FM10K_MAC_VLAN_MSG_DEFAULT_MAC], + perm_addr, &vid); + if (err) + return err; + + ether_addr_copy(hw->mac.perm_addr, perm_addr); + hw->mac.default_vid = vid & (FM10K_VLAN_TABLE_VID_MAX - 1); + hw->mac.vlan_override = !!(vid & FM10K_VLAN_OVERRIDE); + + return 0; +} + +/** + * fm10k_read_mac_addr_vf - Read device MAC address + * @hw: pointer to the HW structure + * + * This function should determine the MAC address for the VF + **/ +static s32 fm10k_read_mac_addr_vf(struct fm10k_hw *hw) +{ + u8 perm_addr[ETH_ALEN]; + u32 base_addr; + + base_addr = fm10k_read_reg(hw, FM10K_TDBAL(0)); + + /* last byte should be 0 */ + if (base_addr << 24) + return FM10K_ERR_INVALID_MAC_ADDR; + + perm_addr[3] = (u8)(base_addr >> 24); + perm_addr[4] = (u8)(base_addr >> 16); + perm_addr[5] = (u8)(base_addr >> 8); + + base_addr = fm10k_read_reg(hw, FM10K_TDBAH(0)); + + /* first byte should be all 1's */ + if ((~base_addr) >> 24) + return FM10K_ERR_INVALID_MAC_ADDR; + + perm_addr[0] = (u8)(base_addr >> 16); + perm_addr[1] = (u8)(base_addr >> 8); + perm_addr[2] = (u8)(base_addr); + + ether_addr_copy(hw->mac.perm_addr, perm_addr); + ether_addr_copy(hw->mac.addr, perm_addr); + + return 0; +} + +/** + * fm10k_update_uc_addr_vf - Update device unicast addresses + * @hw: pointer to the HW structure + * @glort: unused + * @mac: MAC address to add/remove from table + * @vid: VLAN ID to add/remove from table + * @add: Indicates if this is an add or remove operation + * @flags: flags field to indicate add and secure - unused + * + * This function is used to add or remove unicast MAC addresses for + * the VF. + **/ +static s32 fm10k_update_uc_addr_vf(struct fm10k_hw *hw, u16 glort, + const u8 *mac, u16 vid, bool add, u8 flags) +{ + struct fm10k_mbx_info *mbx = &hw->mbx; + u32 msg[7]; + + /* verify VLAN ID is valid */ + if (vid >= FM10K_VLAN_TABLE_VID_MAX) + return FM10K_ERR_PARAM; + + /* verify MAC address is valid */ + if (!is_valid_ether_addr(mac)) + return FM10K_ERR_PARAM; + + /* verify we are not locked down on the MAC address */ + if (is_valid_ether_addr(hw->mac.perm_addr) && + !ether_addr_equal(hw->mac.perm_addr, mac)) + return FM10K_ERR_PARAM; + + /* add bit to notify us if this is a set or clear operation */ + if (!add) + vid |= FM10K_VLAN_CLEAR; + + /* generate VLAN request */ + fm10k_tlv_msg_init(msg, FM10K_VF_MSG_ID_MAC_VLAN); + fm10k_tlv_attr_put_mac_vlan(msg, FM10K_MAC_VLAN_MSG_MAC, mac, vid); + + /* load onto outgoing mailbox */ + return mbx->ops.enqueue_tx(hw, mbx, msg); +} + +/** + * fm10k_update_mc_addr_vf - Update device multicast addresses + * @hw: pointer to the HW structure + * @glort: unused + * @mac: MAC address to add/remove from table + * @vid: VLAN ID to add/remove from table + * @add: Indicates if this is an add or remove operation + * + * This function is used to add or remove multicast MAC addresses for + * the VF. + **/ +static s32 fm10k_update_mc_addr_vf(struct fm10k_hw *hw, u16 glort, + const u8 *mac, u16 vid, bool add) +{ + struct fm10k_mbx_info *mbx = &hw->mbx; + u32 msg[7]; + + /* verify VLAN ID is valid */ + if (vid >= FM10K_VLAN_TABLE_VID_MAX) + return FM10K_ERR_PARAM; + + /* verify multicast address is valid */ + if (!is_multicast_ether_addr(mac)) + return FM10K_ERR_PARAM; + + /* add bit to notify us if this is a set or clear operation */ + if (!add) + vid |= FM10K_VLAN_CLEAR; + + /* generate VLAN request */ + fm10k_tlv_msg_init(msg, FM10K_VF_MSG_ID_MAC_VLAN); + fm10k_tlv_attr_put_mac_vlan(msg, FM10K_MAC_VLAN_MSG_MULTICAST, + mac, vid); + + /* load onto outgoing mailbox */ + return mbx->ops.enqueue_tx(hw, mbx, msg); +} + +/** + * fm10k_update_int_moderator_vf - Request update of interrupt moderator list + * @hw: pointer to hardware structure + * + * This function will issue a request to the PF to rescan our MSI-X table + * and to update the interrupt moderator linked list. + **/ +static void fm10k_update_int_moderator_vf(struct fm10k_hw *hw) +{ + struct fm10k_mbx_info *mbx = &hw->mbx; + u32 msg[1]; + + /* generate MSI-X request */ + fm10k_tlv_msg_init(msg, FM10K_VF_MSG_ID_MSIX); + + /* load onto outgoing mailbox */ + mbx->ops.enqueue_tx(hw, mbx, msg); +} + +/* This structure defines the attibutes to be parsed below */ +const struct fm10k_tlv_attr fm10k_lport_state_msg_attr[] = { + FM10K_TLV_ATTR_BOOL(FM10K_LPORT_STATE_MSG_DISABLE), + FM10K_TLV_ATTR_U8(FM10K_LPORT_STATE_MSG_XCAST_MODE), + FM10K_TLV_ATTR_BOOL(FM10K_LPORT_STATE_MSG_READY), + FM10K_TLV_ATTR_LAST +}; + +/** + * fm10k_msg_lport_state_vf - Message handler for lport_state message from PF + * @hw: Pointer to hardware structure + * @results: pointer array containing parsed data + * @mbx: Pointer to mailbox information structure + * + * This handler is meant to capture the indication from the PF that we + * are ready to bring up the interface. + **/ +s32 fm10k_msg_lport_state_vf(struct fm10k_hw *hw, u32 **results, + struct fm10k_mbx_info *mbx) +{ + hw->mac.dglort_map = !results[FM10K_LPORT_STATE_MSG_READY] ? + FM10K_DGLORTMAP_NONE : FM10K_DGLORTMAP_ZERO; + + return 0; +} + +/** + * fm10k_update_lport_state_vf - Update device state in lower device + * @hw: pointer to the HW structure + * @glort: unused + * @count: number of logical ports to enable - unused (always 1) + * @enable: boolean value indicating if this is an enable or disable request + * + * Notify the lower device of a state change. If the lower device is + * enabled we can add filters, if it is disabled all filters for this + * logical port are flushed. + **/ +static s32 fm10k_update_lport_state_vf(struct fm10k_hw *hw, u16 glort, + u16 count, bool enable) +{ + struct fm10k_mbx_info *mbx = &hw->mbx; + u32 msg[2]; + + /* reset glort mask 0 as we have to wait to be enabled */ + hw->mac.dglort_map = FM10K_DGLORTMAP_NONE; + + /* generate port state request */ + fm10k_tlv_msg_init(msg, FM10K_VF_MSG_ID_LPORT_STATE); + if (!enable) + fm10k_tlv_attr_put_bool(msg, FM10K_LPORT_STATE_MSG_DISABLE); + + /* load onto outgoing mailbox */ + return mbx->ops.enqueue_tx(hw, mbx, msg); +} + +/** + * fm10k_update_xcast_mode_vf - Request update of multicast mode + * @hw: pointer to hardware structure + * @glort: unused + * @mode: integer value indicating mode being requested + * + * This function will attempt to request a higher mode for the port + * so that it can enable either multicast, multicast promiscuous, or + * promiscuous mode of operation. + **/ +static s32 fm10k_update_xcast_mode_vf(struct fm10k_hw *hw, u16 glort, u8 mode) +{ + struct fm10k_mbx_info *mbx = &hw->mbx; + u32 msg[3]; + + if (mode > FM10K_XCAST_MODE_NONE) + return FM10K_ERR_PARAM; + + /* generate message requesting to change xcast mode */ + fm10k_tlv_msg_init(msg, FM10K_VF_MSG_ID_LPORT_STATE); + fm10k_tlv_attr_put_u8(msg, FM10K_LPORT_STATE_MSG_XCAST_MODE, mode); + + /* load onto outgoing mailbox */ + return mbx->ops.enqueue_tx(hw, mbx, msg); +} + +/** + * fm10k_update_hw_stats_vf - Updates hardware related statistics of VF + * @hw: pointer to hardware structure + * @stats: pointer to statistics structure + * + * This function collects and aggregates per queue hardware statistics. + **/ +static void fm10k_update_hw_stats_vf(struct fm10k_hw *hw, + struct fm10k_hw_stats *stats) +{ + fm10k_update_hw_stats_q(hw, stats->q, 0, hw->mac.max_queues); +} + +/** + * fm10k_rebind_hw_stats_vf - Resets base for hardware statistics of VF + * @hw: pointer to hardware structure + * @stats: pointer to the stats structure to update + * + * This function resets the base for queue hardware statistics. + **/ +static void fm10k_rebind_hw_stats_vf(struct fm10k_hw *hw, + struct fm10k_hw_stats *stats) +{ + /* Unbind Queue Statistics */ + fm10k_unbind_hw_stats_q(stats->q, 0, hw->mac.max_queues); + + /* Reinitialize bases for all stats */ + fm10k_update_hw_stats_vf(hw, stats); +} + +/** + * fm10k_configure_dglort_map_vf - Configures GLORT entry and queues + * @hw: pointer to hardware structure + * @dglort: pointer to dglort configuration structure + * + * Reads the configuration structure contained in dglort_cfg and uses + * that information to then populate a DGLORTMAP/DEC entry and the queues + * to which it has been assigned. + **/ +static s32 fm10k_configure_dglort_map_vf(struct fm10k_hw *hw, + struct fm10k_dglort_cfg *dglort) +{ + /* verify the dglort pointer */ + if (!dglort) + return FM10K_ERR_PARAM; + + /* stub for now until we determine correct message for this */ + + return 0; +} + +static const struct fm10k_msg_data fm10k_msg_data_vf[] = { + FM10K_TLV_MSG_TEST_HANDLER(fm10k_tlv_msg_test), + FM10K_VF_MSG_MAC_VLAN_HANDLER(fm10k_msg_mac_vlan_vf), + FM10K_VF_MSG_LPORT_STATE_HANDLER(fm10k_msg_lport_state_vf), + FM10K_TLV_MSG_ERROR_HANDLER(fm10k_tlv_msg_error), +}; + +static const struct fm10k_mac_ops mac_ops_vf = { + .get_bus_info = fm10k_get_bus_info_generic, + .reset_hw = fm10k_reset_hw_vf, + .init_hw = fm10k_init_hw_vf, + .start_hw = fm10k_start_hw_generic, + .stop_hw = fm10k_stop_hw_vf, + .update_vlan = fm10k_update_vlan_vf, + .read_mac_addr = fm10k_read_mac_addr_vf, + .update_uc_addr = fm10k_update_uc_addr_vf, + .update_mc_addr = fm10k_update_mc_addr_vf, + .update_xcast_mode = fm10k_update_xcast_mode_vf, + .update_int_moderator = fm10k_update_int_moderator_vf, + .update_lport_state = fm10k_update_lport_state_vf, + .update_hw_stats = fm10k_update_hw_stats_vf, + .rebind_hw_stats = fm10k_rebind_hw_stats_vf, + .configure_dglort_map = fm10k_configure_dglort_map_vf, + .get_host_state = fm10k_get_host_state_generic, +}; + +static s32 fm10k_get_invariants_vf(struct fm10k_hw *hw) +{ + fm10k_get_invariants_generic(hw); + + return fm10k_pfvf_mbx_init(hw, &hw->mbx, fm10k_msg_data_vf, 0); +} + +const struct fm10k_info fm10k_vf_info = { + .mac = fm10k_mac_vf, + .get_invariants = fm10k_get_invariants_vf, + .mac_ops = &mac_ops_vf, +}; |