diff options
Diffstat (limited to 'drivers/net/hamradio')
| -rw-r--r-- | drivers/net/hamradio/6pack.c | 1005 | ||||
| -rw-r--r-- | drivers/net/hamradio/Kconfig | 193 | ||||
| -rw-r--r-- | drivers/net/hamradio/Makefile | 23 | ||||
| -rw-r--r-- | drivers/net/hamradio/baycom_epp.c | 1338 | ||||
| -rw-r--r-- | drivers/net/hamradio/baycom_par.c | 615 | ||||
| -rw-r--r-- | drivers/net/hamradio/baycom_ser_fdx.c | 718 | ||||
| -rw-r--r-- | drivers/net/hamradio/baycom_ser_hdx.c | 743 | ||||
| -rw-r--r-- | drivers/net/hamradio/bpqether.c | 613 | ||||
| -rw-r--r-- | drivers/net/hamradio/dmascc.c | 1465 | ||||
| -rw-r--r-- | drivers/net/hamradio/hdlcdrv.c | 780 | ||||
| -rw-r--r-- | drivers/net/hamradio/mkiss.c | 1017 | ||||
| -rw-r--r-- | drivers/net/hamradio/scc.c | 2173 | ||||
| -rw-r--r-- | drivers/net/hamradio/yam.c | 1207 | ||||
| -rw-r--r-- | drivers/net/hamradio/z8530.h | 246 |
14 files changed, 12136 insertions, 0 deletions
diff --git a/drivers/net/hamradio/6pack.c b/drivers/net/hamradio/6pack.c new file mode 100644 index 000000000..87094189a --- /dev/null +++ b/drivers/net/hamradio/6pack.c @@ -0,0 +1,1005 @@ +/* + * 6pack.c This module implements the 6pack protocol for kernel-based + * devices like TTY. It interfaces between a raw TTY and the + * kernel's AX.25 protocol layers. + * + * Authors: Andreas Könsgen <ajk@comnets.uni-bremen.de> + * Ralf Baechle DL5RB <ralf@linux-mips.org> + * + * Quite a lot of stuff "stolen" by Joerg Reuter from slip.c, written by + * + * Laurence Culhane, <loz@holmes.demon.co.uk> + * Fred N. van Kempen, <waltje@uwalt.nl.mugnet.org> + */ + +#include <linux/module.h> +#include <linux/uaccess.h> +#include <linux/bitops.h> +#include <linux/string.h> +#include <linux/mm.h> +#include <linux/interrupt.h> +#include <linux/in.h> +#include <linux/tty.h> +#include <linux/errno.h> +#include <linux/netdevice.h> +#include <linux/timer.h> +#include <linux/slab.h> +#include <net/ax25.h> +#include <linux/etherdevice.h> +#include <linux/skbuff.h> +#include <linux/rtnetlink.h> +#include <linux/spinlock.h> +#include <linux/if_arp.h> +#include <linux/init.h> +#include <linux/ip.h> +#include <linux/tcp.h> +#include <linux/semaphore.h> +#include <linux/compat.h> +#include <linux/refcount.h> + +#define SIXPACK_VERSION "Revision: 0.3.0" + +/* sixpack priority commands */ +#define SIXP_SEOF 0x40 /* start and end of a 6pack frame */ +#define SIXP_TX_URUN 0x48 /* transmit overrun */ +#define SIXP_RX_ORUN 0x50 /* receive overrun */ +#define SIXP_RX_BUF_OVL 0x58 /* receive buffer overflow */ + +#define SIXP_CHKSUM 0xFF /* valid checksum of a 6pack frame */ + +/* masks to get certain bits out of the status bytes sent by the TNC */ + +#define SIXP_CMD_MASK 0xC0 +#define SIXP_CHN_MASK 0x07 +#define SIXP_PRIO_CMD_MASK 0x80 +#define SIXP_STD_CMD_MASK 0x40 +#define SIXP_PRIO_DATA_MASK 0x38 +#define SIXP_TX_MASK 0x20 +#define SIXP_RX_MASK 0x10 +#define SIXP_RX_DCD_MASK 0x18 +#define SIXP_LEDS_ON 0x78 +#define SIXP_LEDS_OFF 0x60 +#define SIXP_CON 0x08 +#define SIXP_STA 0x10 + +#define SIXP_FOUND_TNC 0xe9 +#define SIXP_CON_ON 0x68 +#define SIXP_DCD_MASK 0x08 +#define SIXP_DAMA_OFF 0 + +/* default level 2 parameters */ +#define SIXP_TXDELAY 25 /* 250 ms */ +#define SIXP_PERSIST 50 /* in 256ths */ +#define SIXP_SLOTTIME 10 /* 100 ms */ +#define SIXP_INIT_RESYNC_TIMEOUT (3*HZ/2) /* in 1 s */ +#define SIXP_RESYNC_TIMEOUT 5*HZ /* in 1 s */ + +/* 6pack configuration. */ +#define SIXP_NRUNIT 31 /* MAX number of 6pack channels */ +#define SIXP_MTU 256 /* Default MTU */ + +enum sixpack_flags { + SIXPF_ERROR, /* Parity, etc. error */ +}; + +struct sixpack { + /* Various fields. */ + struct tty_struct *tty; /* ptr to TTY structure */ + struct net_device *dev; /* easy for intr handling */ + + /* These are pointers to the malloc()ed frame buffers. */ + unsigned char *rbuff; /* receiver buffer */ + int rcount; /* received chars counter */ + unsigned char *xbuff; /* transmitter buffer */ + unsigned char *xhead; /* next byte to XMIT */ + int xleft; /* bytes left in XMIT queue */ + + unsigned char raw_buf[4]; + unsigned char cooked_buf[400]; + + unsigned int rx_count; + unsigned int rx_count_cooked; + + int mtu; /* Our mtu (to spot changes!) */ + int buffsize; /* Max buffers sizes */ + + unsigned long flags; /* Flag values/ mode etc */ + unsigned char mode; /* 6pack mode */ + + /* 6pack stuff */ + unsigned char tx_delay; + unsigned char persistence; + unsigned char slottime; + unsigned char duplex; + unsigned char led_state; + unsigned char status; + unsigned char status1; + unsigned char status2; + unsigned char tx_enable; + unsigned char tnc_state; + + struct timer_list tx_t; + struct timer_list resync_t; + refcount_t refcnt; + struct semaphore dead_sem; + spinlock_t lock; +}; + +#define AX25_6PACK_HEADER_LEN 0 + +static void sixpack_decode(struct sixpack *, const unsigned char[], int); +static int encode_sixpack(unsigned char *, unsigned char *, int, unsigned char); + +/* + * Perform the persistence/slottime algorithm for CSMA access. If the + * persistence check was successful, write the data to the serial driver. + * Note that in case of DAMA operation, the data is not sent here. + */ + +static void sp_xmit_on_air(struct timer_list *t) +{ + struct sixpack *sp = from_timer(sp, t, tx_t); + int actual, when = sp->slottime; + static unsigned char random; + + random = random * 17 + 41; + + if (((sp->status1 & SIXP_DCD_MASK) == 0) && (random < sp->persistence)) { + sp->led_state = 0x70; + sp->tty->ops->write(sp->tty, &sp->led_state, 1); + sp->tx_enable = 1; + actual = sp->tty->ops->write(sp->tty, sp->xbuff, sp->status2); + sp->xleft -= actual; + sp->xhead += actual; + sp->led_state = 0x60; + sp->tty->ops->write(sp->tty, &sp->led_state, 1); + sp->status2 = 0; + } else + mod_timer(&sp->tx_t, jiffies + ((when + 1) * HZ) / 100); +} + +/* ----> 6pack timer interrupt handler and friends. <---- */ + +/* Encapsulate one AX.25 frame and stuff into a TTY queue. */ +static void sp_encaps(struct sixpack *sp, unsigned char *icp, int len) +{ + unsigned char *msg, *p = icp; + int actual, count; + + if (len > sp->mtu) { /* sp->mtu = AX25_MTU = max. PACLEN = 256 */ + msg = "oversized transmit packet!"; + goto out_drop; + } + + if (len > sp->mtu) { /* sp->mtu = AX25_MTU = max. PACLEN = 256 */ + msg = "oversized transmit packet!"; + goto out_drop; + } + + if (p[0] > 5) { + msg = "invalid KISS command"; + goto out_drop; + } + + if ((p[0] != 0) && (len > 2)) { + msg = "KISS control packet too long"; + goto out_drop; + } + + if ((p[0] == 0) && (len < 15)) { + msg = "bad AX.25 packet to transmit"; + goto out_drop; + } + + count = encode_sixpack(p, sp->xbuff, len, sp->tx_delay); + set_bit(TTY_DO_WRITE_WAKEUP, &sp->tty->flags); + + switch (p[0]) { + case 1: sp->tx_delay = p[1]; + return; + case 2: sp->persistence = p[1]; + return; + case 3: sp->slottime = p[1]; + return; + case 4: /* ignored */ + return; + case 5: sp->duplex = p[1]; + return; + } + + if (p[0] != 0) + return; + + /* + * In case of fullduplex or DAMA operation, we don't take care about the + * state of the DCD or of any timers, as the determination of the + * correct time to send is the job of the AX.25 layer. We send + * immediately after data has arrived. + */ + if (sp->duplex == 1) { + sp->led_state = 0x70; + sp->tty->ops->write(sp->tty, &sp->led_state, 1); + sp->tx_enable = 1; + actual = sp->tty->ops->write(sp->tty, sp->xbuff, count); + sp->xleft = count - actual; + sp->xhead = sp->xbuff + actual; + sp->led_state = 0x60; + sp->tty->ops->write(sp->tty, &sp->led_state, 1); + } else { + sp->xleft = count; + sp->xhead = sp->xbuff; + sp->status2 = count; + sp_xmit_on_air(&sp->tx_t); + } + + return; + +out_drop: + sp->dev->stats.tx_dropped++; + netif_start_queue(sp->dev); + if (net_ratelimit()) + printk(KERN_DEBUG "%s: %s - dropped.\n", sp->dev->name, msg); +} + +/* Encapsulate an IP datagram and kick it into a TTY queue. */ + +static netdev_tx_t sp_xmit(struct sk_buff *skb, struct net_device *dev) +{ + struct sixpack *sp = netdev_priv(dev); + + if (skb->protocol == htons(ETH_P_IP)) + return ax25_ip_xmit(skb); + + spin_lock_bh(&sp->lock); + /* We were not busy, so we are now... :-) */ + netif_stop_queue(dev); + dev->stats.tx_bytes += skb->len; + sp_encaps(sp, skb->data, skb->len); + spin_unlock_bh(&sp->lock); + + dev_kfree_skb(skb); + + return NETDEV_TX_OK; +} + +static int sp_open_dev(struct net_device *dev) +{ + struct sixpack *sp = netdev_priv(dev); + + if (sp->tty == NULL) + return -ENODEV; + return 0; +} + +/* Close the low-level part of the 6pack channel. */ +static int sp_close(struct net_device *dev) +{ + struct sixpack *sp = netdev_priv(dev); + + spin_lock_bh(&sp->lock); + if (sp->tty) { + /* TTY discipline is running. */ + clear_bit(TTY_DO_WRITE_WAKEUP, &sp->tty->flags); + } + netif_stop_queue(dev); + spin_unlock_bh(&sp->lock); + + return 0; +} + +static int sp_set_mac_address(struct net_device *dev, void *addr) +{ + struct sockaddr_ax25 *sa = addr; + + netif_tx_lock_bh(dev); + netif_addr_lock(dev); + memcpy(dev->dev_addr, &sa->sax25_call, AX25_ADDR_LEN); + netif_addr_unlock(dev); + netif_tx_unlock_bh(dev); + + return 0; +} + +static const struct net_device_ops sp_netdev_ops = { + .ndo_open = sp_open_dev, + .ndo_stop = sp_close, + .ndo_start_xmit = sp_xmit, + .ndo_set_mac_address = sp_set_mac_address, +}; + +static void sp_setup(struct net_device *dev) +{ + /* Finish setting up the DEVICE info. */ + dev->netdev_ops = &sp_netdev_ops; + dev->mtu = SIXP_MTU; + dev->hard_header_len = AX25_MAX_HEADER_LEN; + dev->header_ops = &ax25_header_ops; + + dev->addr_len = AX25_ADDR_LEN; + dev->type = ARPHRD_AX25; + dev->tx_queue_len = 10; + + /* Only activated in AX.25 mode */ + memcpy(dev->broadcast, &ax25_bcast, AX25_ADDR_LEN); + memcpy(dev->dev_addr, &ax25_defaddr, AX25_ADDR_LEN); + + dev->flags = 0; +} + +/* Send one completely decapsulated IP datagram to the IP layer. */ + +/* + * This is the routine that sends the received data to the kernel AX.25. + * 'cmd' is the KISS command. For AX.25 data, it is zero. + */ + +static void sp_bump(struct sixpack *sp, char cmd) +{ + struct sk_buff *skb; + int count; + unsigned char *ptr; + + count = sp->rcount + 1; + + sp->dev->stats.rx_bytes += count; + + if ((skb = dev_alloc_skb(count)) == NULL) + goto out_mem; + + ptr = skb_put(skb, count); + *ptr++ = cmd; /* KISS command */ + + memcpy(ptr, sp->cooked_buf + 1, count); + skb->protocol = ax25_type_trans(skb, sp->dev); + netif_rx(skb); + sp->dev->stats.rx_packets++; + + return; + +out_mem: + sp->dev->stats.rx_dropped++; +} + + +/* ----------------------------------------------------------------------- */ + +/* + * We have a potential race on dereferencing tty->disc_data, because the tty + * layer provides no locking at all - thus one cpu could be running + * sixpack_receive_buf while another calls sixpack_close, which zeroes + * tty->disc_data and frees the memory that sixpack_receive_buf is using. The + * best way to fix this is to use a rwlock in the tty struct, but for now we + * use a single global rwlock for all ttys in ppp line discipline. + */ +static DEFINE_RWLOCK(disc_data_lock); + +static struct sixpack *sp_get(struct tty_struct *tty) +{ + struct sixpack *sp; + + read_lock(&disc_data_lock); + sp = tty->disc_data; + if (sp) + refcount_inc(&sp->refcnt); + read_unlock(&disc_data_lock); + + return sp; +} + +static void sp_put(struct sixpack *sp) +{ + if (refcount_dec_and_test(&sp->refcnt)) + up(&sp->dead_sem); +} + +/* + * Called by the TTY driver when there's room for more data. If we have + * more packets to send, we send them here. + */ +static void sixpack_write_wakeup(struct tty_struct *tty) +{ + struct sixpack *sp = sp_get(tty); + int actual; + + if (!sp) + return; + if (sp->xleft <= 0) { + /* Now serial buffer is almost free & we can start + * transmission of another packet */ + sp->dev->stats.tx_packets++; + clear_bit(TTY_DO_WRITE_WAKEUP, &tty->flags); + sp->tx_enable = 0; + netif_wake_queue(sp->dev); + goto out; + } + + if (sp->tx_enable) { + actual = tty->ops->write(tty, sp->xhead, sp->xleft); + sp->xleft -= actual; + sp->xhead += actual; + } + +out: + sp_put(sp); +} + +/* ----------------------------------------------------------------------- */ + +/* + * Handle the 'receiver data ready' interrupt. + * This function is called by the tty module in the kernel when + * a block of 6pack data has been received, which can now be decapsulated + * and sent on to some IP layer for further processing. + */ +static void sixpack_receive_buf(struct tty_struct *tty, + const unsigned char *cp, char *fp, int count) +{ + struct sixpack *sp; + int count1; + + if (!count) + return; + + sp = sp_get(tty); + if (!sp) + return; + + /* Read the characters out of the buffer */ + count1 = count; + while (count) { + count--; + if (fp && *fp++) { + if (!test_and_set_bit(SIXPF_ERROR, &sp->flags)) + sp->dev->stats.rx_errors++; + continue; + } + } + sixpack_decode(sp, cp, count1); + + sp_put(sp); + tty_unthrottle(tty); +} + +/* + * Try to resync the TNC. Called by the resync timer defined in + * decode_prio_command + */ + +#define TNC_UNINITIALIZED 0 +#define TNC_UNSYNC_STARTUP 1 +#define TNC_UNSYNCED 2 +#define TNC_IN_SYNC 3 + +static void __tnc_set_sync_state(struct sixpack *sp, int new_tnc_state) +{ + char *msg; + + switch (new_tnc_state) { + default: /* gcc oh piece-o-crap ... */ + case TNC_UNSYNC_STARTUP: + msg = "Synchronizing with TNC"; + break; + case TNC_UNSYNCED: + msg = "Lost synchronization with TNC\n"; + break; + case TNC_IN_SYNC: + msg = "Found TNC"; + break; + } + + sp->tnc_state = new_tnc_state; + printk(KERN_INFO "%s: %s\n", sp->dev->name, msg); +} + +static inline void tnc_set_sync_state(struct sixpack *sp, int new_tnc_state) +{ + int old_tnc_state = sp->tnc_state; + + if (old_tnc_state != new_tnc_state) + __tnc_set_sync_state(sp, new_tnc_state); +} + +static void resync_tnc(struct timer_list *t) +{ + struct sixpack *sp = from_timer(sp, t, resync_t); + static char resync_cmd = 0xe8; + + /* clear any data that might have been received */ + + sp->rx_count = 0; + sp->rx_count_cooked = 0; + + /* reset state machine */ + + sp->status = 1; + sp->status1 = 1; + sp->status2 = 0; + + /* resync the TNC */ + + sp->led_state = 0x60; + sp->tty->ops->write(sp->tty, &sp->led_state, 1); + sp->tty->ops->write(sp->tty, &resync_cmd, 1); + + + /* Start resync timer again -- the TNC might be still absent */ + mod_timer(&sp->resync_t, jiffies + SIXP_RESYNC_TIMEOUT); +} + +static inline int tnc_init(struct sixpack *sp) +{ + unsigned char inbyte = 0xe8; + + tnc_set_sync_state(sp, TNC_UNSYNC_STARTUP); + + sp->tty->ops->write(sp->tty, &inbyte, 1); + + mod_timer(&sp->resync_t, jiffies + SIXP_RESYNC_TIMEOUT); + + return 0; +} + +/* + * Open the high-level part of the 6pack channel. + * This function is called by the TTY module when the + * 6pack line discipline is called for. Because we are + * sure the tty line exists, we only have to link it to + * a free 6pcack channel... + */ +static int sixpack_open(struct tty_struct *tty) +{ + char *rbuff = NULL, *xbuff = NULL; + struct net_device *dev; + struct sixpack *sp; + unsigned long len; + int err = 0; + + if (!capable(CAP_NET_ADMIN)) + return -EPERM; + if (tty->ops->write == NULL) + return -EOPNOTSUPP; + + dev = alloc_netdev(sizeof(struct sixpack), "sp%d", NET_NAME_UNKNOWN, + sp_setup); + if (!dev) { + err = -ENOMEM; + goto out; + } + + sp = netdev_priv(dev); + sp->dev = dev; + + spin_lock_init(&sp->lock); + refcount_set(&sp->refcnt, 1); + sema_init(&sp->dead_sem, 0); + + /* !!! length of the buffers. MTU is IP MTU, not PACLEN! */ + + len = dev->mtu * 2; + + rbuff = kmalloc(len + 4, GFP_KERNEL); + xbuff = kmalloc(len + 4, GFP_KERNEL); + + if (rbuff == NULL || xbuff == NULL) { + err = -ENOBUFS; + goto out_free; + } + + spin_lock_bh(&sp->lock); + + sp->tty = tty; + + sp->rbuff = rbuff; + sp->xbuff = xbuff; + + sp->mtu = AX25_MTU + 73; + sp->buffsize = len; + sp->rcount = 0; + sp->rx_count = 0; + sp->rx_count_cooked = 0; + sp->xleft = 0; + + sp->flags = 0; /* Clear ESCAPE & ERROR flags */ + + sp->duplex = 0; + sp->tx_delay = SIXP_TXDELAY; + sp->persistence = SIXP_PERSIST; + sp->slottime = SIXP_SLOTTIME; + sp->led_state = 0x60; + sp->status = 1; + sp->status1 = 1; + sp->status2 = 0; + sp->tx_enable = 0; + + netif_start_queue(dev); + + timer_setup(&sp->tx_t, sp_xmit_on_air, 0); + + timer_setup(&sp->resync_t, resync_tnc, 0); + + spin_unlock_bh(&sp->lock); + + /* Done. We have linked the TTY line to a channel. */ + tty->disc_data = sp; + tty->receive_room = 65536; + + /* Now we're ready to register. */ + err = register_netdev(dev); + if (err) + goto out_free; + + tnc_init(sp); + + return 0; + +out_free: + kfree(xbuff); + kfree(rbuff); + + free_netdev(dev); + +out: + return err; +} + + +/* + * Close down a 6pack channel. + * This means flushing out any pending queues, and then restoring the + * TTY line discipline to what it was before it got hooked to 6pack + * (which usually is TTY again). + */ +static void sixpack_close(struct tty_struct *tty) +{ + struct sixpack *sp; + + write_lock_irq(&disc_data_lock); + sp = tty->disc_data; + tty->disc_data = NULL; + write_unlock_irq(&disc_data_lock); + if (!sp) + return; + + /* + * We have now ensured that nobody can start using ap from now on, but + * we have to wait for all existing users to finish. + */ + if (!refcount_dec_and_test(&sp->refcnt)) + down(&sp->dead_sem); + + /* We must stop the queue to avoid potentially scribbling + * on the free buffers. The sp->dead_sem is not sufficient + * to protect us from sp->xbuff access. + */ + netif_stop_queue(sp->dev); + + unregister_netdev(sp->dev); + + del_timer_sync(&sp->tx_t); + del_timer_sync(&sp->resync_t); + + /* Free all 6pack frame buffers after unreg. */ + kfree(sp->rbuff); + kfree(sp->xbuff); + + free_netdev(sp->dev); +} + +/* Perform I/O control on an active 6pack channel. */ +static int sixpack_ioctl(struct tty_struct *tty, struct file *file, + unsigned int cmd, unsigned long arg) +{ + struct sixpack *sp = sp_get(tty); + struct net_device *dev; + unsigned int tmp, err; + + if (!sp) + return -ENXIO; + dev = sp->dev; + + switch(cmd) { + case SIOCGIFNAME: + err = copy_to_user((void __user *) arg, dev->name, + strlen(dev->name) + 1) ? -EFAULT : 0; + break; + + case SIOCGIFENCAP: + err = put_user(0, (int __user *) arg); + break; + + case SIOCSIFENCAP: + if (get_user(tmp, (int __user *) arg)) { + err = -EFAULT; + break; + } + + sp->mode = tmp; + dev->addr_len = AX25_ADDR_LEN; + dev->hard_header_len = AX25_KISS_HEADER_LEN + + AX25_MAX_HEADER_LEN + 3; + dev->type = ARPHRD_AX25; + + err = 0; + break; + + case SIOCSIFHWADDR: { + char addr[AX25_ADDR_LEN]; + + if (copy_from_user(&addr, + (void __user *) arg, AX25_ADDR_LEN)) { + err = -EFAULT; + break; + } + + netif_tx_lock_bh(dev); + memcpy(dev->dev_addr, &addr, AX25_ADDR_LEN); + netif_tx_unlock_bh(dev); + + err = 0; + break; + } + + default: + err = tty_mode_ioctl(tty, file, cmd, arg); + } + + sp_put(sp); + + return err; +} + +#ifdef CONFIG_COMPAT +static long sixpack_compat_ioctl(struct tty_struct * tty, struct file * file, + unsigned int cmd, unsigned long arg) +{ + switch (cmd) { + case SIOCGIFNAME: + case SIOCGIFENCAP: + case SIOCSIFENCAP: + case SIOCSIFHWADDR: + return sixpack_ioctl(tty, file, cmd, + (unsigned long)compat_ptr(arg)); + } + + return -ENOIOCTLCMD; +} +#endif + +static struct tty_ldisc_ops sp_ldisc = { + .owner = THIS_MODULE, + .magic = TTY_LDISC_MAGIC, + .name = "6pack", + .open = sixpack_open, + .close = sixpack_close, + .ioctl = sixpack_ioctl, +#ifdef CONFIG_COMPAT + .compat_ioctl = sixpack_compat_ioctl, +#endif + .receive_buf = sixpack_receive_buf, + .write_wakeup = sixpack_write_wakeup, +}; + +/* Initialize 6pack control device -- register 6pack line discipline */ + +static const char msg_banner[] __initconst = KERN_INFO \ + "AX.25: 6pack driver, " SIXPACK_VERSION "\n"; +static const char msg_regfail[] __initconst = KERN_ERR \ + "6pack: can't register line discipline (err = %d)\n"; + +static int __init sixpack_init_driver(void) +{ + int status; + + printk(msg_banner); + + /* Register the provided line protocol discipline */ + if ((status = tty_register_ldisc(N_6PACK, &sp_ldisc)) != 0) + printk(msg_regfail, status); + + return status; +} + +static const char msg_unregfail[] = KERN_ERR \ + "6pack: can't unregister line discipline (err = %d)\n"; + +static void __exit sixpack_exit_driver(void) +{ + int ret; + + if ((ret = tty_unregister_ldisc(N_6PACK))) + printk(msg_unregfail, ret); +} + +/* encode an AX.25 packet into 6pack */ + +static int encode_sixpack(unsigned char *tx_buf, unsigned char *tx_buf_raw, + int length, unsigned char tx_delay) +{ + int count = 0; + unsigned char checksum = 0, buf[400]; + int raw_count = 0; + + tx_buf_raw[raw_count++] = SIXP_PRIO_CMD_MASK | SIXP_TX_MASK; + tx_buf_raw[raw_count++] = SIXP_SEOF; + + buf[0] = tx_delay; + for (count = 1; count < length; count++) + buf[count] = tx_buf[count]; + + for (count = 0; count < length; count++) + checksum += buf[count]; + buf[length] = (unsigned char) 0xff - checksum; + + for (count = 0; count <= length; count++) { + if ((count % 3) == 0) { + tx_buf_raw[raw_count++] = (buf[count] & 0x3f); + tx_buf_raw[raw_count] = ((buf[count] >> 2) & 0x30); + } else if ((count % 3) == 1) { + tx_buf_raw[raw_count++] |= (buf[count] & 0x0f); + tx_buf_raw[raw_count] = ((buf[count] >> 2) & 0x3c); + } else { + tx_buf_raw[raw_count++] |= (buf[count] & 0x03); + tx_buf_raw[raw_count++] = (buf[count] >> 2); + } + } + if ((length % 3) != 2) + raw_count++; + tx_buf_raw[raw_count++] = SIXP_SEOF; + return raw_count; +} + +/* decode 4 sixpack-encoded bytes into 3 data bytes */ + +static void decode_data(struct sixpack *sp, unsigned char inbyte) +{ + unsigned char *buf; + + if (sp->rx_count != 3) { + sp->raw_buf[sp->rx_count++] = inbyte; + + return; + } + + if (sp->rx_count_cooked + 2 >= sizeof(sp->cooked_buf)) { + pr_err("6pack: cooked buffer overrun, data loss\n"); + sp->rx_count = 0; + return; + } + + buf = sp->raw_buf; + sp->cooked_buf[sp->rx_count_cooked++] = + buf[0] | ((buf[1] << 2) & 0xc0); + sp->cooked_buf[sp->rx_count_cooked++] = + (buf[1] & 0x0f) | ((buf[2] << 2) & 0xf0); + sp->cooked_buf[sp->rx_count_cooked++] = + (buf[2] & 0x03) | (inbyte << 2); + sp->rx_count = 0; +} + +/* identify and execute a 6pack priority command byte */ + +static void decode_prio_command(struct sixpack *sp, unsigned char cmd) +{ + int actual; + + if ((cmd & SIXP_PRIO_DATA_MASK) != 0) { /* idle ? */ + + /* RX and DCD flags can only be set in the same prio command, + if the DCD flag has been set without the RX flag in the previous + prio command. If DCD has not been set before, something in the + transmission has gone wrong. In this case, RX and DCD are + cleared in order to prevent the decode_data routine from + reading further data that might be corrupt. */ + + if (((sp->status & SIXP_DCD_MASK) == 0) && + ((cmd & SIXP_RX_DCD_MASK) == SIXP_RX_DCD_MASK)) { + if (sp->status != 1) + printk(KERN_DEBUG "6pack: protocol violation\n"); + else + sp->status = 0; + cmd &= ~SIXP_RX_DCD_MASK; + } + sp->status = cmd & SIXP_PRIO_DATA_MASK; + } else { /* output watchdog char if idle */ + if ((sp->status2 != 0) && (sp->duplex == 1)) { + sp->led_state = 0x70; + sp->tty->ops->write(sp->tty, &sp->led_state, 1); + sp->tx_enable = 1; + actual = sp->tty->ops->write(sp->tty, sp->xbuff, sp->status2); + sp->xleft -= actual; + sp->xhead += actual; + sp->led_state = 0x60; + sp->status2 = 0; + + } + } + + /* needed to trigger the TNC watchdog */ + sp->tty->ops->write(sp->tty, &sp->led_state, 1); + + /* if the state byte has been received, the TNC is present, + so the resync timer can be reset. */ + + if (sp->tnc_state == TNC_IN_SYNC) + mod_timer(&sp->resync_t, jiffies + SIXP_INIT_RESYNC_TIMEOUT); + + sp->status1 = cmd & SIXP_PRIO_DATA_MASK; +} + +/* identify and execute a standard 6pack command byte */ + +static void decode_std_command(struct sixpack *sp, unsigned char cmd) +{ + unsigned char checksum = 0, rest = 0; + short i; + + switch (cmd & SIXP_CMD_MASK) { /* normal command */ + case SIXP_SEOF: + if ((sp->rx_count == 0) && (sp->rx_count_cooked == 0)) { + if ((sp->status & SIXP_RX_DCD_MASK) == + SIXP_RX_DCD_MASK) { + sp->led_state = 0x68; + sp->tty->ops->write(sp->tty, &sp->led_state, 1); + } + } else { + sp->led_state = 0x60; + /* fill trailing bytes with zeroes */ + sp->tty->ops->write(sp->tty, &sp->led_state, 1); + rest = sp->rx_count; + if (rest != 0) + for (i = rest; i <= 3; i++) + decode_data(sp, 0); + if (rest == 2) + sp->rx_count_cooked -= 2; + else if (rest == 3) + sp->rx_count_cooked -= 1; + for (i = 0; i < sp->rx_count_cooked; i++) + checksum += sp->cooked_buf[i]; + if (checksum != SIXP_CHKSUM) { + printk(KERN_DEBUG "6pack: bad checksum %2.2x\n", checksum); + } else { + sp->rcount = sp->rx_count_cooked-2; + sp_bump(sp, 0); + } + sp->rx_count_cooked = 0; + } + break; + case SIXP_TX_URUN: printk(KERN_DEBUG "6pack: TX underrun\n"); + break; + case SIXP_RX_ORUN: printk(KERN_DEBUG "6pack: RX overrun\n"); + break; + case SIXP_RX_BUF_OVL: + printk(KERN_DEBUG "6pack: RX buffer overflow\n"); + } +} + +/* decode a 6pack packet */ + +static void +sixpack_decode(struct sixpack *sp, const unsigned char *pre_rbuff, int count) +{ + unsigned char inbyte; + int count1; + + for (count1 = 0; count1 < count; count1++) { + inbyte = pre_rbuff[count1]; + if (inbyte == SIXP_FOUND_TNC) { + tnc_set_sync_state(sp, TNC_IN_SYNC); + del_timer(&sp->resync_t); + } + if ((inbyte & SIXP_PRIO_CMD_MASK) != 0) + decode_prio_command(sp, inbyte); + else if ((inbyte & SIXP_STD_CMD_MASK) != 0) + decode_std_command(sp, inbyte); + else if ((sp->status & SIXP_RX_DCD_MASK) == SIXP_RX_DCD_MASK) + decode_data(sp, inbyte); + } +} + +MODULE_AUTHOR("Ralf Baechle DO1GRB <ralf@linux-mips.org>"); +MODULE_DESCRIPTION("6pack driver for AX.25"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS_LDISC(N_6PACK); + +module_init(sixpack_init_driver); +module_exit(sixpack_exit_driver); diff --git a/drivers/net/hamradio/Kconfig b/drivers/net/hamradio/Kconfig new file mode 100644 index 000000000..bf5e59687 --- /dev/null +++ b/drivers/net/hamradio/Kconfig @@ -0,0 +1,193 @@ +config MKISS + tristate "Serial port KISS driver" + depends on AX25 && TTY + select CRC16 + ---help--- + KISS is a protocol used for the exchange of data between a computer + and a Terminal Node Controller (a small embedded system commonly + used for networking over AX.25 amateur radio connections; it + connects the computer's serial port with the radio's microphone + input and speaker output). + + Although KISS is less advanced than the 6pack protocol, it has + the advantage that it is already supported by most modern TNCs + without the need for a firmware upgrade. + + To compile this driver as a module, choose M here: the module + will be called mkiss. + +config 6PACK + tristate "Serial port 6PACK driver" + depends on AX25 && TTY + ---help--- + 6pack is a transmission protocol for the data exchange between your + PC and your TNC (the Terminal Node Controller acts as a kind of + modem connecting your computer's serial port to your radio's + microphone input and speaker output). This protocol can be used as + an alternative to KISS for networking over AX.25 amateur radio + connections, but it has some extended functionality. + + Note that this driver is still experimental and might cause + problems. For details about the features and the usage of the + driver, read <file:Documentation/networking/6pack.txt>. + + To compile this driver as a module, choose M here: the module + will be called 6pack. + +config BPQETHER + tristate "BPQ Ethernet driver" + depends on AX25 + help + AX.25 is the protocol used for computer communication over amateur + radio. If you say Y here, you will be able to send and receive AX.25 + traffic over Ethernet (also called "BPQ AX.25"), which could be + useful if some other computer on your local network has a direct + amateur radio connection. + +config DMASCC + tristate "High-speed (DMA) SCC driver for AX.25" + depends on ISA && AX25 && BROKEN_ON_SMP && ISA_DMA_API + ---help--- + This is a driver for high-speed SCC boards, i.e. those supporting + DMA on one port. You usually use those boards to connect your + computer to an amateur radio modem (such as the WA4DSY 56kbps + modem), in order to send and receive AX.25 packet radio network + traffic. + + Currently, this driver supports Ottawa PI/PI2, Paccomm/Gracilis + PackeTwin, and S5SCC/DMA boards. They are detected automatically. + If you have one of these cards, say Y here and read the AX25-HOWTO, + available from <http://www.tldp.org/docs.html#howto>. + + This driver can operate multiple boards simultaneously. If you + compile it as a module (by saying M instead of Y), it will be called + dmascc. If you don't pass any parameter to the driver, all + possible I/O addresses are probed. This could irritate other devices + that are currently not in use. You may specify the list of addresses + to be probed by "dmascc.io=addr1,addr2,..." (when compiled into the + kernel image) or "io=addr1,addr2,..." (when loaded as a module). The + network interfaces will be called dmascc0 and dmascc1 for the board + detected first, dmascc2 and dmascc3 for the second one, and so on. + + Before you configure each interface with ifconfig, you MUST set + certain parameters, such as channel access timing, clock mode, and + DMA channel. This is accomplished with a small utility program, + dmascc_cfg, available at + <http://www.linux-ax25.org/wiki/Ax25-tools>. Please be sure to + get at least version 1.27 of dmascc_cfg, as older versions will not + work with the current driver. + +config SCC + tristate "Z8530 SCC driver" + depends on ISA && AX25 && ISA_DMA_API + ---help--- + These cards are used to connect your Linux box to an amateur radio + in order to communicate with other computers. If you want to use + this, read <file:Documentation/networking/z8530drv.txt> and the + AX25-HOWTO, available from + <http://www.tldp.org/docs.html#howto>. Also make sure to say Y + to "Amateur Radio AX.25 Level 2" support. + + To compile this driver as a module, choose M here: the module + will be called scc. + +config SCC_DELAY + bool "additional delay for PA0HZP OptoSCC compatible boards" + depends on SCC + help + Say Y here if you experience problems with the SCC driver not + working properly; please read + <file:Documentation/networking/z8530drv.txt> for details. + + If unsure, say N. + +config SCC_TRXECHO + bool "support for TRX that feedback the tx signal to rx" + depends on SCC + help + Some transmitters feed the transmitted signal back to the receive + line. Say Y here to foil this by explicitly disabling the receiver + during data transmission. + + If in doubt, say Y. + +config BAYCOM_SER_FDX + tristate "BAYCOM ser12 fullduplex driver for AX.25" + depends on AX25 && !S390 + select CRC_CCITT + ---help--- + This is one of two drivers for Baycom style simple amateur radio + modems that connect to a serial interface. The driver supports the + ser12 design in full-duplex mode. In addition, it allows the + baudrate to be set between 300 and 4800 baud (however not all modems + support all baudrates). This is the preferred driver. The next + driver, "BAYCOM ser12 half-duplex driver for AX.25" is the old + driver and still provided in case this driver does not work with + your serial interface chip. To configure the driver, use the sethdlc + utility available in the standard ax25 utilities package. For + information on the modems, see <http://www.baycom.de/> and + <file:Documentation/networking/baycom.txt>. + + To compile this driver as a module, choose M here: the module + will be called baycom_ser_fdx. This is recommended. + +config BAYCOM_SER_HDX + tristate "BAYCOM ser12 halfduplex driver for AX.25" + depends on AX25 && !S390 + select CRC_CCITT + ---help--- + This is one of two drivers for Baycom style simple amateur radio + modems that connect to a serial interface. The driver supports the + ser12 design in half-duplex mode. This is the old driver. It is + still provided in case your serial interface chip does not work with + the full-duplex driver. This driver is deprecated. To configure + the driver, use the sethdlc utility available in the standard ax25 + utilities package. For information on the modems, see + <http://www.baycom.de/> and + <file:Documentation/networking/baycom.txt>. + + To compile this driver as a module, choose M here: the module + will be called baycom_ser_hdx. This is recommended. + +config BAYCOM_PAR + tristate "BAYCOM picpar and par96 driver for AX.25" + depends on PARPORT && AX25 + select CRC_CCITT + ---help--- + This is a driver for Baycom style simple amateur radio modems that + connect to a parallel interface. The driver supports the picpar and + par96 designs. To configure the driver, use the sethdlc utility + available in the standard ax25 utilities package. For information on + the modems, see <http://www.baycom.de/> and the file + <file:Documentation/networking/baycom.txt>. + + To compile this driver as a module, choose M here: the module + will be called baycom_par. This is recommended. + +config BAYCOM_EPP + tristate "BAYCOM epp driver for AX.25" + depends on PARPORT && AX25 && !64BIT + select CRC_CCITT + ---help--- + This is a driver for Baycom style simple amateur radio modems that + connect to a parallel interface. The driver supports the EPP + designs. To configure the driver, use the sethdlc utility available + in the standard ax25 utilities package. For information on the + modems, see <http://www.baycom.de/> and the file + <file:Documentation/networking/baycom.txt>. + + To compile this driver as a module, choose M here: the module + will be called baycom_epp. This is recommended. + +config YAM + tristate "YAM driver for AX.25" + depends on AX25 && !S390 + help + The YAM is a modem for packet radio which connects to the serial + port and includes some of the functions of a Terminal Node + Controller. If you have one of those, say Y here. + + To compile this driver as a module, choose M here: the module + will be called yam. + + diff --git a/drivers/net/hamradio/Makefile b/drivers/net/hamradio/Makefile new file mode 100644 index 000000000..7a1518d76 --- /dev/null +++ b/drivers/net/hamradio/Makefile @@ -0,0 +1,23 @@ +# SPDX-License-Identifier: GPL-2.0 +# +# Makefile for the Linux AX.25 and HFMODEM device drivers. +# +# +# 19971130 Moved the amateur radio related network drivers from +# drivers/net/ to drivers/hamradio for easier maintenance. +# Joerg Reuter DL1BKE <jreuter@yaina.de> +# +# 20000806 Rewritten to use lists instead of if-statements. +# Christoph Hellwig <hch@infradead.org> +# + +obj-$(CONFIG_DMASCC) += dmascc.o +obj-$(CONFIG_SCC) += scc.o +obj-$(CONFIG_MKISS) += mkiss.o +obj-$(CONFIG_6PACK) += 6pack.o +obj-$(CONFIG_YAM) += yam.o +obj-$(CONFIG_BPQETHER) += bpqether.o +obj-$(CONFIG_BAYCOM_SER_FDX) += baycom_ser_fdx.o hdlcdrv.o +obj-$(CONFIG_BAYCOM_SER_HDX) += baycom_ser_hdx.o hdlcdrv.o +obj-$(CONFIG_BAYCOM_PAR) += baycom_par.o hdlcdrv.o +obj-$(CONFIG_BAYCOM_EPP) += baycom_epp.o hdlcdrv.o diff --git a/drivers/net/hamradio/baycom_epp.c b/drivers/net/hamradio/baycom_epp.c new file mode 100644 index 000000000..1e62d0073 --- /dev/null +++ b/drivers/net/hamradio/baycom_epp.c @@ -0,0 +1,1338 @@ +/*****************************************************************************/ + +/* + * baycom_epp.c -- baycom epp radio modem driver. + * + * Copyright (C) 1998-2000 + * Thomas Sailer (sailer@ife.ee.ethz.ch) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + * Please note that the GPL allows you to use the driver, NOT the radio. + * In order to use the radio, you need a license from the communications + * authority of your country. + * + * + * History: + * 0.1 xx.xx.1998 Initial version by Matthias Welwarsky (dg2fef) + * 0.2 21.04.1998 Massive rework by Thomas Sailer + * Integrated FPGA EPP modem configuration routines + * 0.3 11.05.1998 Took FPGA config out and moved it into a separate program + * 0.4 26.07.1999 Adapted to new lowlevel parport driver interface + * 0.5 03.08.1999 adapt to Linus' new __setup/__initcall + * removed some pre-2.2 kernel compatibility cruft + * 0.6 10.08.1999 Check if parport can do SPP and is safe to access during interrupt contexts + * 0.7 12.02.2000 adapted to softnet driver interface + * + */ + +/*****************************************************************************/ + +#include <linux/crc-ccitt.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/sched.h> +#include <linux/string.h> +#include <linux/workqueue.h> +#include <linux/fs.h> +#include <linux/parport.h> +#include <linux/if_arp.h> +#include <linux/hdlcdrv.h> +#include <linux/baycom.h> +#include <linux/jiffies.h> +#include <linux/random.h> +#include <net/ax25.h> +#include <linux/uaccess.h> + +/* --------------------------------------------------------------------- */ + +#define BAYCOM_DEBUG +#define BAYCOM_MAGIC 19730510 + +/* --------------------------------------------------------------------- */ + +static const char paranoia_str[] = KERN_ERR + "baycom_epp: bad magic number for hdlcdrv_state struct in routine %s\n"; + +static const char bc_drvname[] = "baycom_epp"; +static const char bc_drvinfo[] = KERN_INFO "baycom_epp: (C) 1998-2000 Thomas Sailer, HB9JNX/AE4WA\n" +"baycom_epp: version 0.7\n"; + +/* --------------------------------------------------------------------- */ + +#define NR_PORTS 4 + +static struct net_device *baycom_device[NR_PORTS]; + +/* --------------------------------------------------------------------- */ + +/* EPP status register */ +#define EPP_DCDBIT 0x80 +#define EPP_PTTBIT 0x08 +#define EPP_NREF 0x01 +#define EPP_NRAEF 0x02 +#define EPP_NRHF 0x04 +#define EPP_NTHF 0x20 +#define EPP_NTAEF 0x10 +#define EPP_NTEF EPP_PTTBIT + +/* EPP control register */ +#define EPP_TX_FIFO_ENABLE 0x10 +#define EPP_RX_FIFO_ENABLE 0x08 +#define EPP_MODEM_ENABLE 0x20 +#define EPP_LEDS 0xC0 +#define EPP_IRQ_ENABLE 0x10 + +/* LPT registers */ +#define LPTREG_ECONTROL 0x402 +#define LPTREG_CONFIGB 0x401 +#define LPTREG_CONFIGA 0x400 +#define LPTREG_EPPDATA 0x004 +#define LPTREG_EPPADDR 0x003 +#define LPTREG_CONTROL 0x002 +#define LPTREG_STATUS 0x001 +#define LPTREG_DATA 0x000 + +/* LPT control register */ +#define LPTCTRL_PROGRAM 0x04 /* 0 to reprogram */ +#define LPTCTRL_WRITE 0x01 +#define LPTCTRL_ADDRSTB 0x08 +#define LPTCTRL_DATASTB 0x02 +#define LPTCTRL_INTEN 0x10 + +/* LPT status register */ +#define LPTSTAT_SHIFT_NINTR 6 +#define LPTSTAT_WAIT 0x80 +#define LPTSTAT_NINTR (1<<LPTSTAT_SHIFT_NINTR) +#define LPTSTAT_PE 0x20 +#define LPTSTAT_DONE 0x10 +#define LPTSTAT_NERROR 0x08 +#define LPTSTAT_EPPTIMEOUT 0x01 + +/* LPT data register */ +#define LPTDATA_SHIFT_TDI 0 +#define LPTDATA_SHIFT_TMS 2 +#define LPTDATA_TDI (1<<LPTDATA_SHIFT_TDI) +#define LPTDATA_TCK 0x02 +#define LPTDATA_TMS (1<<LPTDATA_SHIFT_TMS) +#define LPTDATA_INITBIAS 0x80 + + +/* EPP modem config/status bits */ +#define EPP_DCDBIT 0x80 +#define EPP_PTTBIT 0x08 +#define EPP_RXEBIT 0x01 +#define EPP_RXAEBIT 0x02 +#define EPP_RXHFULL 0x04 + +#define EPP_NTHF 0x20 +#define EPP_NTAEF 0x10 +#define EPP_NTEF EPP_PTTBIT + +#define EPP_TX_FIFO_ENABLE 0x10 +#define EPP_RX_FIFO_ENABLE 0x08 +#define EPP_MODEM_ENABLE 0x20 +#define EPP_LEDS 0xC0 +#define EPP_IRQ_ENABLE 0x10 + +/* Xilinx 4k JTAG instructions */ +#define XC4K_IRLENGTH 3 +#define XC4K_EXTEST 0 +#define XC4K_PRELOAD 1 +#define XC4K_CONFIGURE 5 +#define XC4K_BYPASS 7 + +#define EPP_CONVENTIONAL 0 +#define EPP_FPGA 1 +#define EPP_FPGAEXTSTATUS 2 + +#define TXBUFFER_SIZE ((HDLCDRV_MAXFLEN*6/5)+8) + +/* ---------------------------------------------------------------------- */ +/* + * Information that need to be kept for each board. + */ + +struct baycom_state { + int magic; + + struct pardevice *pdev; + struct net_device *dev; + unsigned int work_running; + struct delayed_work run_work; + unsigned int modem; + unsigned int bitrate; + unsigned char stat; + + struct { + unsigned int intclk; + unsigned int fclk; + unsigned int bps; + unsigned int extmodem; + unsigned int loopback; + } cfg; + + struct hdlcdrv_channel_params ch_params; + + struct { + unsigned int bitbuf, bitstream, numbits, state; + unsigned char *bufptr; + int bufcnt; + unsigned char buf[TXBUFFER_SIZE]; + } hdlcrx; + + struct { + int calibrate; + int slotcnt; + int flags; + enum { tx_idle = 0, tx_keyup, tx_data, tx_tail } state; + unsigned char *bufptr; + int bufcnt; + unsigned char buf[TXBUFFER_SIZE]; + } hdlctx; + + unsigned int ptt_keyed; + struct sk_buff *skb; /* next transmit packet */ + +#ifdef BAYCOM_DEBUG + struct debug_vals { + unsigned long last_jiffies; + unsigned cur_intcnt; + unsigned last_intcnt; + int cur_pllcorr; + int last_pllcorr; + unsigned int mod_cycles; + unsigned int demod_cycles; + } debug_vals; +#endif /* BAYCOM_DEBUG */ +}; + +/* --------------------------------------------------------------------- */ + +#define KISS_VERBOSE + +/* --------------------------------------------------------------------- */ + +#define PARAM_TXDELAY 1 +#define PARAM_PERSIST 2 +#define PARAM_SLOTTIME 3 +#define PARAM_TXTAIL 4 +#define PARAM_FULLDUP 5 +#define PARAM_HARDWARE 6 +#define PARAM_RETURN 255 + +/* --------------------------------------------------------------------- */ +/* + * the CRC routines are stolen from WAMPES + * by Dieter Deyke + */ + + +/*---------------------------------------------------------------------------*/ + +#if 0 +static inline void append_crc_ccitt(unsigned char *buffer, int len) +{ + unsigned int crc = 0xffff; + + for (;len>0;len--) + crc = (crc >> 8) ^ crc_ccitt_table[(crc ^ *buffer++) & 0xff]; + crc ^= 0xffff; + *buffer++ = crc; + *buffer++ = crc >> 8; +} +#endif + +/*---------------------------------------------------------------------------*/ + +static inline int check_crc_ccitt(const unsigned char *buf, int cnt) +{ + return (crc_ccitt(0xffff, buf, cnt) & 0xffff) == 0xf0b8; +} + +/*---------------------------------------------------------------------------*/ + +static inline int calc_crc_ccitt(const unsigned char *buf, int cnt) +{ + return (crc_ccitt(0xffff, buf, cnt) ^ 0xffff) & 0xffff; +} + +/* ---------------------------------------------------------------------- */ + +#define tenms_to_flags(bc,tenms) ((tenms * bc->bitrate) / 800) + +/* --------------------------------------------------------------------- */ + +static inline void baycom_int_freq(struct baycom_state *bc) +{ +#ifdef BAYCOM_DEBUG + unsigned long cur_jiffies = jiffies; + /* + * measure the interrupt frequency + */ + bc->debug_vals.cur_intcnt++; + if (time_after_eq(cur_jiffies, bc->debug_vals.last_jiffies + HZ)) { + bc->debug_vals.last_jiffies = cur_jiffies; + bc->debug_vals.last_intcnt = bc->debug_vals.cur_intcnt; + bc->debug_vals.cur_intcnt = 0; + bc->debug_vals.last_pllcorr = bc->debug_vals.cur_pllcorr; + bc->debug_vals.cur_pllcorr = 0; + } +#endif /* BAYCOM_DEBUG */ +} + +/* ---------------------------------------------------------------------- */ +/* + * eppconfig_path should be setable via /proc/sys. + */ + +static char const eppconfig_path[] = "/usr/sbin/eppfpga"; + +static char *envp[] = { "HOME=/", "TERM=linux", "PATH=/usr/bin:/bin", NULL }; + +/* eppconfig: called during ifconfig up to configure the modem */ +static int eppconfig(struct baycom_state *bc) +{ + char modearg[256]; + char portarg[16]; + char *argv[] = { + (char *)eppconfig_path, + "-s", + "-p", portarg, + "-m", modearg, + NULL }; + + /* set up arguments */ + sprintf(modearg, "%sclk,%smodem,fclk=%d,bps=%d,divider=%d%s,extstat", + bc->cfg.intclk ? "int" : "ext", + bc->cfg.extmodem ? "ext" : "int", bc->cfg.fclk, bc->cfg.bps, + (bc->cfg.fclk + 8 * bc->cfg.bps) / (16 * bc->cfg.bps), + bc->cfg.loopback ? ",loopback" : ""); + sprintf(portarg, "%ld", bc->pdev->port->base); + printk(KERN_DEBUG "%s: %s -s -p %s -m %s\n", bc_drvname, eppconfig_path, portarg, modearg); + + return call_usermodehelper(eppconfig_path, argv, envp, UMH_WAIT_PROC); +} + +/* ---------------------------------------------------------------------- */ + +static inline void do_kiss_params(struct baycom_state *bc, + unsigned char *data, unsigned long len) +{ + +#ifdef KISS_VERBOSE +#define PKP(a,b) printk(KERN_INFO "baycomm_epp: channel params: " a "\n", b) +#else /* KISS_VERBOSE */ +#define PKP(a,b) +#endif /* KISS_VERBOSE */ + + if (len < 2) + return; + switch(data[0]) { + case PARAM_TXDELAY: + bc->ch_params.tx_delay = data[1]; + PKP("TX delay = %ums", 10 * bc->ch_params.tx_delay); + break; + case PARAM_PERSIST: + bc->ch_params.ppersist = data[1]; + PKP("p persistence = %u", bc->ch_params.ppersist); + break; + case PARAM_SLOTTIME: + bc->ch_params.slottime = data[1]; + PKP("slot time = %ums", bc->ch_params.slottime); + break; + case PARAM_TXTAIL: + bc->ch_params.tx_tail = data[1]; + PKP("TX tail = %ums", bc->ch_params.tx_tail); + break; + case PARAM_FULLDUP: + bc->ch_params.fulldup = !!data[1]; + PKP("%s duplex", bc->ch_params.fulldup ? "full" : "half"); + break; + default: + break; + } +#undef PKP +} + +/* --------------------------------------------------------------------- */ + +static void encode_hdlc(struct baycom_state *bc) +{ + struct sk_buff *skb; + unsigned char *wp, *bp; + int pkt_len; + unsigned bitstream, notbitstream, bitbuf, numbit, crc; + unsigned char crcarr[2]; + int j; + + if (bc->hdlctx.bufcnt > 0) + return; + skb = bc->skb; + if (!skb) + return; + bc->skb = NULL; + pkt_len = skb->len-1; /* strip KISS byte */ + wp = bc->hdlctx.buf; + bp = skb->data+1; + crc = calc_crc_ccitt(bp, pkt_len); + crcarr[0] = crc; + crcarr[1] = crc >> 8; + *wp++ = 0x7e; + bitstream = bitbuf = numbit = 0; + while (pkt_len > -2) { + bitstream >>= 8; + bitstream |= ((unsigned int)*bp) << 8; + bitbuf |= ((unsigned int)*bp) << numbit; + notbitstream = ~bitstream; + bp++; + pkt_len--; + if (!pkt_len) + bp = crcarr; + for (j = 0; j < 8; j++) + if (unlikely(!(notbitstream & (0x1f0 << j)))) { + bitstream &= ~(0x100 << j); + bitbuf = (bitbuf & (((2 << j) << numbit) - 1)) | + ((bitbuf & ~(((2 << j) << numbit) - 1)) << 1); + numbit++; + notbitstream = ~bitstream; + } + numbit += 8; + while (numbit >= 8) { + *wp++ = bitbuf; + bitbuf >>= 8; + numbit -= 8; + } + } + bitbuf |= 0x7e7e << numbit; + numbit += 16; + while (numbit >= 8) { + *wp++ = bitbuf; + bitbuf >>= 8; + numbit -= 8; + } + bc->hdlctx.bufptr = bc->hdlctx.buf; + bc->hdlctx.bufcnt = wp - bc->hdlctx.buf; + dev_kfree_skb(skb); + bc->dev->stats.tx_packets++; +} + +/* ---------------------------------------------------------------------- */ + +static int transmit(struct baycom_state *bc, int cnt, unsigned char stat) +{ + struct parport *pp = bc->pdev->port; + unsigned char tmp[128]; + int i, j; + + if (bc->hdlctx.state == tx_tail && !(stat & EPP_PTTBIT)) + bc->hdlctx.state = tx_idle; + if (bc->hdlctx.state == tx_idle && bc->hdlctx.calibrate <= 0) { + if (bc->hdlctx.bufcnt <= 0) + encode_hdlc(bc); + if (bc->hdlctx.bufcnt <= 0) + return 0; + if (!bc->ch_params.fulldup) { + if (!(stat & EPP_DCDBIT)) { + bc->hdlctx.slotcnt = bc->ch_params.slottime; + return 0; + } + if ((--bc->hdlctx.slotcnt) > 0) + return 0; + bc->hdlctx.slotcnt = bc->ch_params.slottime; + if ((prandom_u32() % 256) > bc->ch_params.ppersist) + return 0; + } + } + if (bc->hdlctx.state == tx_idle && bc->hdlctx.bufcnt > 0) { + bc->hdlctx.state = tx_keyup; + bc->hdlctx.flags = tenms_to_flags(bc, bc->ch_params.tx_delay); + bc->ptt_keyed++; + } + while (cnt > 0) { + switch (bc->hdlctx.state) { + case tx_keyup: + i = min_t(int, cnt, bc->hdlctx.flags); + cnt -= i; + bc->hdlctx.flags -= i; + if (bc->hdlctx.flags <= 0) + bc->hdlctx.state = tx_data; + memset(tmp, 0x7e, sizeof(tmp)); + while (i > 0) { + j = (i > sizeof(tmp)) ? sizeof(tmp) : i; + if (j != pp->ops->epp_write_data(pp, tmp, j, 0)) + return -1; + i -= j; + } + break; + + case tx_data: + if (bc->hdlctx.bufcnt <= 0) { + encode_hdlc(bc); + if (bc->hdlctx.bufcnt <= 0) { + bc->hdlctx.state = tx_tail; + bc->hdlctx.flags = tenms_to_flags(bc, bc->ch_params.tx_tail); + break; + } + } + i = min_t(int, cnt, bc->hdlctx.bufcnt); + bc->hdlctx.bufcnt -= i; + cnt -= i; + if (i != pp->ops->epp_write_data(pp, bc->hdlctx.bufptr, i, 0)) + return -1; + bc->hdlctx.bufptr += i; + break; + + case tx_tail: + encode_hdlc(bc); + if (bc->hdlctx.bufcnt > 0) { + bc->hdlctx.state = tx_data; + break; + } + i = min_t(int, cnt, bc->hdlctx.flags); + if (i) { + cnt -= i; + bc->hdlctx.flags -= i; + memset(tmp, 0x7e, sizeof(tmp)); + while (i > 0) { + j = (i > sizeof(tmp)) ? sizeof(tmp) : i; + if (j != pp->ops->epp_write_data(pp, tmp, j, 0)) + return -1; + i -= j; + } + break; + } + + default: /* fall through */ + if (bc->hdlctx.calibrate <= 0) + return 0; + i = min_t(int, cnt, bc->hdlctx.calibrate); + cnt -= i; + bc->hdlctx.calibrate -= i; + memset(tmp, 0, sizeof(tmp)); + while (i > 0) { + j = (i > sizeof(tmp)) ? sizeof(tmp) : i; + if (j != pp->ops->epp_write_data(pp, tmp, j, 0)) + return -1; + i -= j; + } + break; + } + } + return 0; +} + +/* ---------------------------------------------------------------------- */ + +static void do_rxpacket(struct net_device *dev) +{ + struct baycom_state *bc = netdev_priv(dev); + struct sk_buff *skb; + unsigned char *cp; + unsigned pktlen; + + if (bc->hdlcrx.bufcnt < 4) + return; + if (!check_crc_ccitt(bc->hdlcrx.buf, bc->hdlcrx.bufcnt)) + return; + pktlen = bc->hdlcrx.bufcnt-2+1; /* KISS kludge */ + if (!(skb = dev_alloc_skb(pktlen))) { + printk("%s: memory squeeze, dropping packet\n", dev->name); + dev->stats.rx_dropped++; + return; + } + cp = skb_put(skb, pktlen); + *cp++ = 0; /* KISS kludge */ + memcpy(cp, bc->hdlcrx.buf, pktlen - 1); + skb->protocol = ax25_type_trans(skb, dev); + netif_rx(skb); + dev->stats.rx_packets++; +} + +static int receive(struct net_device *dev, int cnt) +{ + struct baycom_state *bc = netdev_priv(dev); + struct parport *pp = bc->pdev->port; + unsigned int bitbuf, notbitstream, bitstream, numbits, state; + unsigned char tmp[128]; + unsigned char *cp; + int cnt2, ret = 0; + int j; + + numbits = bc->hdlcrx.numbits; + state = bc->hdlcrx.state; + bitstream = bc->hdlcrx.bitstream; + bitbuf = bc->hdlcrx.bitbuf; + while (cnt > 0) { + cnt2 = (cnt > sizeof(tmp)) ? sizeof(tmp) : cnt; + cnt -= cnt2; + if (cnt2 != pp->ops->epp_read_data(pp, tmp, cnt2, 0)) { + ret = -1; + break; + } + cp = tmp; + for (; cnt2 > 0; cnt2--, cp++) { + bitstream >>= 8; + bitstream |= (*cp) << 8; + bitbuf >>= 8; + bitbuf |= (*cp) << 8; + numbits += 8; + notbitstream = ~bitstream; + for (j = 0; j < 8; j++) { + + /* flag or abort */ + if (unlikely(!(notbitstream & (0x0fc << j)))) { + + /* abort received */ + if (!(notbitstream & (0x1fc << j))) + state = 0; + + /* flag received */ + else if ((bitstream & (0x1fe << j)) == (0x0fc << j)) { + if (state) + do_rxpacket(dev); + bc->hdlcrx.bufcnt = 0; + bc->hdlcrx.bufptr = bc->hdlcrx.buf; + state = 1; + numbits = 7-j; + } + } + + /* stuffed bit */ + else if (unlikely((bitstream & (0x1f8 << j)) == (0xf8 << j))) { + numbits--; + bitbuf = (bitbuf & ((~0xff) << j)) | ((bitbuf & ~((~0xff) << j)) << 1); + } + } + while (state && numbits >= 8) { + if (bc->hdlcrx.bufcnt >= TXBUFFER_SIZE) { + state = 0; + } else { + *(bc->hdlcrx.bufptr)++ = bitbuf >> (16-numbits); + bc->hdlcrx.bufcnt++; + numbits -= 8; + } + } + } + } + bc->hdlcrx.numbits = numbits; + bc->hdlcrx.state = state; + bc->hdlcrx.bitstream = bitstream; + bc->hdlcrx.bitbuf = bitbuf; + return ret; +} + +/* --------------------------------------------------------------------- */ + +#ifdef __i386__ +#include <asm/msr.h> +#define GETTICK(x) \ +({ \ + if (boot_cpu_has(X86_FEATURE_TSC)) \ + x = (unsigned int)rdtsc(); \ +}) +#else /* __i386__ */ +#define GETTICK(x) +#endif /* __i386__ */ + +static void epp_bh(struct work_struct *work) +{ + struct net_device *dev; + struct baycom_state *bc; + struct parport *pp; + unsigned char stat; + unsigned char tmp[2]; + unsigned int time1 = 0, time2 = 0, time3 = 0; + int cnt, cnt2; + + bc = container_of(work, struct baycom_state, run_work.work); + dev = bc->dev; + if (!bc->work_running) + return; + baycom_int_freq(bc); + pp = bc->pdev->port; + /* update status */ + if (pp->ops->epp_read_addr(pp, &stat, 1, 0) != 1) + goto epptimeout; + bc->stat = stat; + bc->debug_vals.last_pllcorr = stat; + GETTICK(time1); + if (bc->modem == EPP_FPGAEXTSTATUS) { + /* get input count */ + tmp[0] = EPP_TX_FIFO_ENABLE|EPP_RX_FIFO_ENABLE|EPP_MODEM_ENABLE|1; + if (pp->ops->epp_write_addr(pp, tmp, 1, 0) != 1) + goto epptimeout; + if (pp->ops->epp_read_addr(pp, tmp, 2, 0) != 2) + goto epptimeout; + cnt = tmp[0] | (tmp[1] << 8); + cnt &= 0x7fff; + /* get output count */ + tmp[0] = EPP_TX_FIFO_ENABLE|EPP_RX_FIFO_ENABLE|EPP_MODEM_ENABLE|2; + if (pp->ops->epp_write_addr(pp, tmp, 1, 0) != 1) + goto epptimeout; + if (pp->ops->epp_read_addr(pp, tmp, 2, 0) != 2) + goto epptimeout; + cnt2 = tmp[0] | (tmp[1] << 8); + cnt2 = 16384 - (cnt2 & 0x7fff); + /* return to normal */ + tmp[0] = EPP_TX_FIFO_ENABLE|EPP_RX_FIFO_ENABLE|EPP_MODEM_ENABLE; + if (pp->ops->epp_write_addr(pp, tmp, 1, 0) != 1) + goto epptimeout; + if (transmit(bc, cnt2, stat)) + goto epptimeout; + GETTICK(time2); + if (receive(dev, cnt)) + goto epptimeout; + if (pp->ops->epp_read_addr(pp, &stat, 1, 0) != 1) + goto epptimeout; + bc->stat = stat; + } else { + /* try to tx */ + switch (stat & (EPP_NTAEF|EPP_NTHF)) { + case EPP_NTHF: + cnt = 2048 - 256; + break; + + case EPP_NTAEF: + cnt = 2048 - 1793; + break; + + case 0: + cnt = 0; + break; + + default: + cnt = 2048 - 1025; + break; + } + if (transmit(bc, cnt, stat)) + goto epptimeout; + GETTICK(time2); + /* do receiver */ + while ((stat & (EPP_NRAEF|EPP_NRHF)) != EPP_NRHF) { + switch (stat & (EPP_NRAEF|EPP_NRHF)) { + case EPP_NRAEF: + cnt = 1025; + break; + + case 0: + cnt = 1793; + break; + + default: + cnt = 256; + break; + } + if (receive(dev, cnt)) + goto epptimeout; + if (pp->ops->epp_read_addr(pp, &stat, 1, 0) != 1) + goto epptimeout; + } + cnt = 0; + if (bc->bitrate < 50000) + cnt = 256; + else if (bc->bitrate < 100000) + cnt = 128; + while (cnt > 0 && stat & EPP_NREF) { + if (receive(dev, 1)) + goto epptimeout; + cnt--; + if (pp->ops->epp_read_addr(pp, &stat, 1, 0) != 1) + goto epptimeout; + } + } + GETTICK(time3); +#ifdef BAYCOM_DEBUG + bc->debug_vals.mod_cycles = time2 - time1; + bc->debug_vals.demod_cycles = time3 - time2; +#endif /* BAYCOM_DEBUG */ + schedule_delayed_work(&bc->run_work, 1); + if (!bc->skb) + netif_wake_queue(dev); + return; + epptimeout: + printk(KERN_ERR "%s: EPP timeout!\n", bc_drvname); +} + +/* ---------------------------------------------------------------------- */ +/* + * ===================== network driver interface ========================= + */ + +static int baycom_send_packet(struct sk_buff *skb, struct net_device *dev) +{ + struct baycom_state *bc = netdev_priv(dev); + + if (skb->protocol == htons(ETH_P_IP)) + return ax25_ip_xmit(skb); + + if (skb->data[0] != 0) { + do_kiss_params(bc, skb->data, skb->len); + dev_kfree_skb(skb); + return NETDEV_TX_OK; + } + if (bc->skb) { + dev_kfree_skb(skb); + return NETDEV_TX_OK; + } + /* strip KISS byte */ + if (skb->len >= HDLCDRV_MAXFLEN+1 || skb->len < 3) { + dev_kfree_skb(skb); + return NETDEV_TX_OK; + } + netif_stop_queue(dev); + bc->skb = skb; + return NETDEV_TX_OK; +} + +/* --------------------------------------------------------------------- */ + +static int baycom_set_mac_address(struct net_device *dev, void *addr) +{ + struct sockaddr *sa = (struct sockaddr *)addr; + + /* addr is an AX.25 shifted ASCII mac address */ + memcpy(dev->dev_addr, sa->sa_data, dev->addr_len); + return 0; +} + +/* --------------------------------------------------------------------- */ + +static void epp_wakeup(void *handle) +{ + struct net_device *dev = (struct net_device *)handle; + struct baycom_state *bc = netdev_priv(dev); + + printk(KERN_DEBUG "baycom_epp: %s: why am I being woken up?\n", dev->name); + if (!parport_claim(bc->pdev)) + printk(KERN_DEBUG "baycom_epp: %s: I'm broken.\n", dev->name); +} + +/* --------------------------------------------------------------------- */ + +/* + * Open/initialize the board. This is called (in the current kernel) + * sometime after booting when the 'ifconfig' program is run. + * + * This routine should set everything up anew at each open, even + * registers that "should" only need to be set once at boot, so that + * there is non-reboot way to recover if something goes wrong. + */ + +static int epp_open(struct net_device *dev) +{ + struct baycom_state *bc = netdev_priv(dev); + struct parport *pp = parport_find_base(dev->base_addr); + unsigned int i, j; + unsigned char tmp[128]; + unsigned char stat; + unsigned long tstart; + struct pardev_cb par_cb; + + if (!pp) { + printk(KERN_ERR "%s: parport at 0x%lx unknown\n", bc_drvname, dev->base_addr); + return -ENXIO; + } +#if 0 + if (pp->irq < 0) { + printk(KERN_ERR "%s: parport at 0x%lx has no irq\n", bc_drvname, pp->base); + parport_put_port(pp); + return -ENXIO; + } +#endif + if ((~pp->modes) & (PARPORT_MODE_TRISTATE | PARPORT_MODE_PCSPP | PARPORT_MODE_SAFEININT)) { + printk(KERN_ERR "%s: parport at 0x%lx cannot be used\n", + bc_drvname, pp->base); + parport_put_port(pp); + return -EIO; + } + memset(&bc->modem, 0, sizeof(bc->modem)); + memset(&par_cb, 0, sizeof(par_cb)); + par_cb.wakeup = epp_wakeup; + par_cb.private = (void *)dev; + par_cb.flags = PARPORT_DEV_EXCL; + for (i = 0; i < NR_PORTS; i++) + if (baycom_device[i] == dev) + break; + + if (i == NR_PORTS) { + pr_err("%s: no device found\n", bc_drvname); + parport_put_port(pp); + return -ENODEV; + } + + bc->pdev = parport_register_dev_model(pp, dev->name, &par_cb, i); + parport_put_port(pp); + if (!bc->pdev) { + printk(KERN_ERR "%s: cannot register parport at 0x%lx\n", bc_drvname, pp->base); + return -ENXIO; + } + if (parport_claim(bc->pdev)) { + printk(KERN_ERR "%s: parport at 0x%lx busy\n", bc_drvname, pp->base); + parport_unregister_device(bc->pdev); + return -EBUSY; + } + dev->irq = /*pp->irq*/ 0; + INIT_DELAYED_WORK(&bc->run_work, epp_bh); + bc->work_running = 1; + bc->modem = EPP_CONVENTIONAL; + if (eppconfig(bc)) + printk(KERN_INFO "%s: no FPGA detected, assuming conventional EPP modem\n", bc_drvname); + else + bc->modem = /*EPP_FPGA*/ EPP_FPGAEXTSTATUS; + parport_write_control(pp, LPTCTRL_PROGRAM); /* prepare EPP mode; we aren't using interrupts */ + /* reset the modem */ + tmp[0] = 0; + tmp[1] = EPP_TX_FIFO_ENABLE|EPP_RX_FIFO_ENABLE|EPP_MODEM_ENABLE; + if (pp->ops->epp_write_addr(pp, tmp, 2, 0) != 2) + goto epptimeout; + /* autoprobe baud rate */ + tstart = jiffies; + i = 0; + while (time_before(jiffies, tstart + HZ/3)) { + if (pp->ops->epp_read_addr(pp, &stat, 1, 0) != 1) + goto epptimeout; + if ((stat & (EPP_NRAEF|EPP_NRHF)) == EPP_NRHF) { + schedule(); + continue; + } + if (pp->ops->epp_read_data(pp, tmp, 128, 0) != 128) + goto epptimeout; + if (pp->ops->epp_read_data(pp, tmp, 128, 0) != 128) + goto epptimeout; + i += 256; + } + for (j = 0; j < 256; j++) { + if (pp->ops->epp_read_addr(pp, &stat, 1, 0) != 1) + goto epptimeout; + if (!(stat & EPP_NREF)) + break; + if (pp->ops->epp_read_data(pp, tmp, 1, 0) != 1) + goto epptimeout; + i++; + } + tstart = jiffies - tstart; + bc->bitrate = i * (8 * HZ) / tstart; + j = 1; + i = bc->bitrate >> 3; + while (j < 7 && i > 150) { + j++; + i >>= 1; + } + printk(KERN_INFO "%s: autoprobed bitrate: %d int divider: %d int rate: %d\n", + bc_drvname, bc->bitrate, j, bc->bitrate >> (j+2)); + tmp[0] = EPP_TX_FIFO_ENABLE|EPP_RX_FIFO_ENABLE|EPP_MODEM_ENABLE/*|j*/; + if (pp->ops->epp_write_addr(pp, tmp, 1, 0) != 1) + goto epptimeout; + /* + * initialise hdlc variables + */ + bc->hdlcrx.state = 0; + bc->hdlcrx.numbits = 0; + bc->hdlctx.state = tx_idle; + bc->hdlctx.bufcnt = 0; + bc->hdlctx.slotcnt = bc->ch_params.slottime; + bc->hdlctx.calibrate = 0; + /* start the bottom half stuff */ + schedule_delayed_work(&bc->run_work, 1); + netif_start_queue(dev); + return 0; + + epptimeout: + printk(KERN_ERR "%s: epp timeout during bitrate probe\n", bc_drvname); + parport_write_control(pp, 0); /* reset the adapter */ + parport_release(bc->pdev); + parport_unregister_device(bc->pdev); + return -EIO; +} + +/* --------------------------------------------------------------------- */ + +static int epp_close(struct net_device *dev) +{ + struct baycom_state *bc = netdev_priv(dev); + struct parport *pp = bc->pdev->port; + unsigned char tmp[1]; + + bc->work_running = 0; + cancel_delayed_work_sync(&bc->run_work); + bc->stat = EPP_DCDBIT; + tmp[0] = 0; + pp->ops->epp_write_addr(pp, tmp, 1, 0); + parport_write_control(pp, 0); /* reset the adapter */ + parport_release(bc->pdev); + parport_unregister_device(bc->pdev); + if (bc->skb) + dev_kfree_skb(bc->skb); + bc->skb = NULL; + printk(KERN_INFO "%s: close epp at iobase 0x%lx irq %u\n", + bc_drvname, dev->base_addr, dev->irq); + return 0; +} + +/* --------------------------------------------------------------------- */ + +static int baycom_setmode(struct baycom_state *bc, const char *modestr) +{ + const char *cp; + + if (strstr(modestr,"intclk")) + bc->cfg.intclk = 1; + if (strstr(modestr,"extclk")) + bc->cfg.intclk = 0; + if (strstr(modestr,"intmodem")) + bc->cfg.extmodem = 0; + if (strstr(modestr,"extmodem")) + bc->cfg.extmodem = 1; + if (strstr(modestr,"noloopback")) + bc->cfg.loopback = 0; + if (strstr(modestr,"loopback")) + bc->cfg.loopback = 1; + if ((cp = strstr(modestr,"fclk="))) { + bc->cfg.fclk = simple_strtoul(cp+5, NULL, 0); + if (bc->cfg.fclk < 1000000) + bc->cfg.fclk = 1000000; + if (bc->cfg.fclk > 25000000) + bc->cfg.fclk = 25000000; + } + if ((cp = strstr(modestr,"bps="))) { + bc->cfg.bps = simple_strtoul(cp+4, NULL, 0); + if (bc->cfg.bps < 1000) + bc->cfg.bps = 1000; + if (bc->cfg.bps > 1500000) + bc->cfg.bps = 1500000; + } + return 0; +} + +/* --------------------------------------------------------------------- */ + +static int baycom_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) +{ + struct baycom_state *bc = netdev_priv(dev); + struct hdlcdrv_ioctl hi; + + if (cmd != SIOCDEVPRIVATE) + return -ENOIOCTLCMD; + + if (copy_from_user(&hi, ifr->ifr_data, sizeof(hi))) + return -EFAULT; + switch (hi.cmd) { + default: + return -ENOIOCTLCMD; + + case HDLCDRVCTL_GETCHANNELPAR: + hi.data.cp.tx_delay = bc->ch_params.tx_delay; + hi.data.cp.tx_tail = bc->ch_params.tx_tail; + hi.data.cp.slottime = bc->ch_params.slottime; + hi.data.cp.ppersist = bc->ch_params.ppersist; + hi.data.cp.fulldup = bc->ch_params.fulldup; + break; + + case HDLCDRVCTL_SETCHANNELPAR: + if (!capable(CAP_NET_ADMIN)) + return -EACCES; + bc->ch_params.tx_delay = hi.data.cp.tx_delay; + bc->ch_params.tx_tail = hi.data.cp.tx_tail; + bc->ch_params.slottime = hi.data.cp.slottime; + bc->ch_params.ppersist = hi.data.cp.ppersist; + bc->ch_params.fulldup = hi.data.cp.fulldup; + bc->hdlctx.slotcnt = 1; + return 0; + + case HDLCDRVCTL_GETMODEMPAR: + hi.data.mp.iobase = dev->base_addr; + hi.data.mp.irq = dev->irq; + hi.data.mp.dma = dev->dma; + hi.data.mp.dma2 = 0; + hi.data.mp.seriobase = 0; + hi.data.mp.pariobase = 0; + hi.data.mp.midiiobase = 0; + break; + + case HDLCDRVCTL_SETMODEMPAR: + if ((!capable(CAP_SYS_RAWIO)) || netif_running(dev)) + return -EACCES; + dev->base_addr = hi.data.mp.iobase; + dev->irq = /*hi.data.mp.irq*/0; + dev->dma = /*hi.data.mp.dma*/0; + return 0; + + case HDLCDRVCTL_GETSTAT: + hi.data.cs.ptt = !!(bc->stat & EPP_PTTBIT); + hi.data.cs.dcd = !(bc->stat & EPP_DCDBIT); + hi.data.cs.ptt_keyed = bc->ptt_keyed; + hi.data.cs.tx_packets = dev->stats.tx_packets; + hi.data.cs.tx_errors = dev->stats.tx_errors; + hi.data.cs.rx_packets = dev->stats.rx_packets; + hi.data.cs.rx_errors = dev->stats.rx_errors; + break; + + case HDLCDRVCTL_OLDGETSTAT: + hi.data.ocs.ptt = !!(bc->stat & EPP_PTTBIT); + hi.data.ocs.dcd = !(bc->stat & EPP_DCDBIT); + hi.data.ocs.ptt_keyed = bc->ptt_keyed; + break; + + case HDLCDRVCTL_CALIBRATE: + if (!capable(CAP_SYS_RAWIO)) + return -EACCES; + bc->hdlctx.calibrate = hi.data.calibrate * bc->bitrate / 8; + return 0; + + case HDLCDRVCTL_DRIVERNAME: + strncpy(hi.data.drivername, "baycom_epp", sizeof(hi.data.drivername)); + break; + + case HDLCDRVCTL_GETMODE: + sprintf(hi.data.modename, "%sclk,%smodem,fclk=%d,bps=%d%s", + bc->cfg.intclk ? "int" : "ext", + bc->cfg.extmodem ? "ext" : "int", bc->cfg.fclk, bc->cfg.bps, + bc->cfg.loopback ? ",loopback" : ""); + break; + + case HDLCDRVCTL_SETMODE: + if (!capable(CAP_NET_ADMIN) || netif_running(dev)) + return -EACCES; + hi.data.modename[sizeof(hi.data.modename)-1] = '\0'; + return baycom_setmode(bc, hi.data.modename); + + case HDLCDRVCTL_MODELIST: + strncpy(hi.data.modename, "intclk,extclk,intmodem,extmodem,divider=x", + sizeof(hi.data.modename)); + break; + + case HDLCDRVCTL_MODEMPARMASK: + return HDLCDRV_PARMASK_IOBASE; + + } + if (copy_to_user(ifr->ifr_data, &hi, sizeof(hi))) + return -EFAULT; + return 0; +} + +/* --------------------------------------------------------------------- */ + +static const struct net_device_ops baycom_netdev_ops = { + .ndo_open = epp_open, + .ndo_stop = epp_close, + .ndo_do_ioctl = baycom_ioctl, + .ndo_start_xmit = baycom_send_packet, + .ndo_set_mac_address = baycom_set_mac_address, +}; + +/* + * Check for a network adaptor of this type, and return '0' if one exists. + * If dev->base_addr == 0, probe all likely locations. + * If dev->base_addr == 1, always return failure. + * If dev->base_addr == 2, allocate space for the device and return success + * (detachable devices only). + */ +static void baycom_probe(struct net_device *dev) +{ + const struct hdlcdrv_channel_params dflt_ch_params = { + 20, 2, 10, 40, 0 + }; + struct baycom_state *bc; + + /* + * not a real probe! only initialize data structures + */ + bc = netdev_priv(dev); + /* + * initialize the baycom_state struct + */ + bc->ch_params = dflt_ch_params; + bc->ptt_keyed = 0; + + /* + * initialize the device struct + */ + + /* Fill in the fields of the device structure */ + bc->skb = NULL; + + dev->netdev_ops = &baycom_netdev_ops; + dev->header_ops = &ax25_header_ops; + + dev->type = ARPHRD_AX25; /* AF_AX25 device */ + dev->hard_header_len = AX25_MAX_HEADER_LEN + AX25_BPQ_HEADER_LEN; + dev->mtu = AX25_DEF_PACLEN; /* eth_mtu is the default */ + dev->addr_len = AX25_ADDR_LEN; /* sizeof an ax.25 address */ + memcpy(dev->broadcast, &ax25_bcast, AX25_ADDR_LEN); + memcpy(dev->dev_addr, &null_ax25_address, AX25_ADDR_LEN); + dev->tx_queue_len = 16; + + /* New style flags */ + dev->flags = 0; +} + +/* --------------------------------------------------------------------- */ + +/* + * command line settable parameters + */ +static char *mode[NR_PORTS] = { "", }; +static int iobase[NR_PORTS] = { 0x378, }; + +module_param_array(mode, charp, NULL, 0); +MODULE_PARM_DESC(mode, "baycom operating mode"); +module_param_hw_array(iobase, int, ioport, NULL, 0); +MODULE_PARM_DESC(iobase, "baycom io base address"); + +MODULE_AUTHOR("Thomas M. Sailer, sailer@ife.ee.ethz.ch, hb9jnx@hb9w.che.eu"); +MODULE_DESCRIPTION("Baycom epp amateur radio modem driver"); +MODULE_LICENSE("GPL"); + +/* --------------------------------------------------------------------- */ + +static int baycom_epp_par_probe(struct pardevice *par_dev) +{ + struct device_driver *drv = par_dev->dev.driver; + int len = strlen(drv->name); + + if (strncmp(par_dev->name, drv->name, len)) + return -ENODEV; + + return 0; +} + +static struct parport_driver baycom_epp_par_driver = { + .name = "bce", + .probe = baycom_epp_par_probe, + .devmodel = true, +}; + +static void __init baycom_epp_dev_setup(struct net_device *dev) +{ + struct baycom_state *bc = netdev_priv(dev); + + /* + * initialize part of the baycom_state struct + */ + bc->dev = dev; + bc->magic = BAYCOM_MAGIC; + bc->cfg.fclk = 19666600; + bc->cfg.bps = 9600; + /* + * initialize part of the device struct + */ + baycom_probe(dev); +} + +static int __init init_baycomepp(void) +{ + int i, found = 0, ret; + char set_hw = 1; + + printk(bc_drvinfo); + + ret = parport_register_driver(&baycom_epp_par_driver); + if (ret) + return ret; + + /* + * register net devices + */ + for (i = 0; i < NR_PORTS; i++) { + struct net_device *dev; + + dev = alloc_netdev(sizeof(struct baycom_state), "bce%d", + NET_NAME_UNKNOWN, baycom_epp_dev_setup); + + if (!dev) { + printk(KERN_WARNING "bce%d : out of memory\n", i); + return found ? 0 : -ENOMEM; + } + + sprintf(dev->name, "bce%d", i); + dev->base_addr = iobase[i]; + + if (!mode[i]) + set_hw = 0; + if (!set_hw) + iobase[i] = 0; + + if (register_netdev(dev)) { + printk(KERN_WARNING "%s: cannot register net device %s\n", bc_drvname, dev->name); + free_netdev(dev); + break; + } + if (set_hw && baycom_setmode(netdev_priv(dev), mode[i])) + set_hw = 0; + baycom_device[i] = dev; + found++; + } + + if (found == 0) { + parport_unregister_driver(&baycom_epp_par_driver); + return -ENXIO; + } + + return 0; +} + +static void __exit cleanup_baycomepp(void) +{ + int i; + + for(i = 0; i < NR_PORTS; i++) { + struct net_device *dev = baycom_device[i]; + + if (dev) { + struct baycom_state *bc = netdev_priv(dev); + if (bc->magic == BAYCOM_MAGIC) { + unregister_netdev(dev); + free_netdev(dev); + } else + printk(paranoia_str, "cleanup_module"); + } + } + parport_unregister_driver(&baycom_epp_par_driver); +} + +module_init(init_baycomepp); +module_exit(cleanup_baycomepp); + +/* --------------------------------------------------------------------- */ + +#ifndef MODULE + +/* + * format: baycom_epp=io,mode + * mode: fpga config options + */ + +static int __init baycom_epp_setup(char *str) +{ + static unsigned __initdata nr_dev = 0; + int ints[2]; + + if (nr_dev >= NR_PORTS) + return 0; + str = get_options(str, 2, ints); + if (ints[0] < 1) + return 0; + mode[nr_dev] = str; + iobase[nr_dev] = ints[1]; + nr_dev++; + return 1; +} + +__setup("baycom_epp=", baycom_epp_setup); + +#endif /* MODULE */ +/* --------------------------------------------------------------------- */ diff --git a/drivers/net/hamradio/baycom_par.c b/drivers/net/hamradio/baycom_par.c new file mode 100644 index 000000000..1f7ceafd6 --- /dev/null +++ b/drivers/net/hamradio/baycom_par.c @@ -0,0 +1,615 @@ +/*****************************************************************************/ + +/* + * baycom_par.c -- baycom par96 and picpar radio modem driver. + * + * Copyright (C) 1996-2000 Thomas Sailer (sailer@ife.ee.ethz.ch) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + * Please note that the GPL allows you to use the driver, NOT the radio. + * In order to use the radio, you need a license from the communications + * authority of your country. + * + * + * Supported modems + * + * par96: This is a modem for 9600 baud FSK compatible to the G3RUH standard. + * The modem does all the filtering and regenerates the receiver clock. + * Data is transferred from and to the PC via a shift register. + * The shift register is filled with 16 bits and an interrupt is + * signalled. The PC then empties the shift register in a burst. This + * modem connects to the parallel port, hence the name. The modem + * leaves the implementation of the HDLC protocol and the scrambler + * polynomial to the PC. This modem is no longer available (at least + * from Baycom) and has been replaced by the PICPAR modem (see below). + * You may however still build one from the schematics published in + * cq-DL :-). + * + * picpar: This is a redesign of the par96 modem by Henning Rech, DF9IC. The + * modem is protocol compatible to par96, but uses only three low + * power ICs and can therefore be fed from the parallel port and + * does not require an additional power supply. It features + * built in DCD circuitry. The driver should therefore be configured + * for hardware DCD. + * + * + * Command line options (insmod command line) + * + * mode driver mode string. Valid choices are par96 and picpar. + * iobase base address of the port; common values are 0x378, 0x278, 0x3bc + * + * + * History: + * 0.1 26.06.1996 Adapted from baycom.c and made network driver interface + * 18.10.1996 Changed to new user space access routines (copy_{to,from}_user) + * 0.3 26.04.1997 init code/data tagged + * 0.4 08.07.1997 alternative ser12 decoding algorithm (uses delta CTS ints) + * 0.5 11.11.1997 split into separate files for ser12/par96 + * 0.6 03.08.1999 adapt to Linus' new __setup/__initcall + * removed some pre-2.2 kernel compatibility cruft + * 0.7 10.08.1999 Check if parport can do SPP and is safe to access during interrupt contexts + * 0.8 12.02.2000 adapted to softnet driver interface + * removed direct parport access, uses parport driver methods + * 0.9 03.07.2000 fix interface name handling + */ + +/*****************************************************************************/ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/fcntl.h> +#include <linux/interrupt.h> +#include <linux/ioport.h> +#include <linux/in.h> +#include <linux/string.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/errno.h> +#include <linux/netdevice.h> +#include <linux/hdlcdrv.h> +#include <linux/baycom.h> +#include <linux/parport.h> +#include <linux/bitops.h> +#include <linux/jiffies.h> + +#include <linux/uaccess.h> + +/* --------------------------------------------------------------------- */ + +#define BAYCOM_DEBUG + +/* + * modem options; bit mask + */ +#define BAYCOM_OPTIONS_SOFTDCD 1 + +/* --------------------------------------------------------------------- */ + +static const char bc_drvname[] = "baycom_par"; +static const char bc_drvinfo[] = KERN_INFO "baycom_par: (C) 1996-2000 Thomas Sailer, HB9JNX/AE4WA\n" +"baycom_par: version 0.9\n"; + +/* --------------------------------------------------------------------- */ + +#define NR_PORTS 4 + +static struct net_device *baycom_device[NR_PORTS]; + +/* --------------------------------------------------------------------- */ + +#define PAR96_BURSTBITS 16 +#define PAR96_BURST 4 +#define PAR96_PTT 2 +#define PAR96_TXBIT 1 +#define PAR96_ACK 0x40 +#define PAR96_RXBIT 0x20 +#define PAR96_DCD 0x10 +#define PAR97_POWER 0xf8 + +/* ---------------------------------------------------------------------- */ +/* + * Information that need to be kept for each board. + */ + +struct baycom_state { + struct hdlcdrv_state hdrv; + + struct pardevice *pdev; + unsigned int options; + + struct modem_state { + short arb_divider; + unsigned char flags; + unsigned int shreg; + struct modem_state_par96 { + int dcd_count; + unsigned int dcd_shreg; + unsigned long descram; + unsigned long scram; + } par96; + } modem; + +#ifdef BAYCOM_DEBUG + struct debug_vals { + unsigned long last_jiffies; + unsigned cur_intcnt; + unsigned last_intcnt; + int cur_pllcorr; + int last_pllcorr; + } debug_vals; +#endif /* BAYCOM_DEBUG */ +}; + +/* --------------------------------------------------------------------- */ + +static inline void baycom_int_freq(struct baycom_state *bc) +{ +#ifdef BAYCOM_DEBUG + unsigned long cur_jiffies = jiffies; + /* + * measure the interrupt frequency + */ + bc->debug_vals.cur_intcnt++; + if (time_after_eq(cur_jiffies, bc->debug_vals.last_jiffies + HZ)) { + bc->debug_vals.last_jiffies = cur_jiffies; + bc->debug_vals.last_intcnt = bc->debug_vals.cur_intcnt; + bc->debug_vals.cur_intcnt = 0; + bc->debug_vals.last_pllcorr = bc->debug_vals.cur_pllcorr; + bc->debug_vals.cur_pllcorr = 0; + } +#endif /* BAYCOM_DEBUG */ +} + +/* --------------------------------------------------------------------- */ +/* + * ===================== PAR96 specific routines ========================= + */ + +#define PAR96_DESCRAM_TAP1 0x20000 +#define PAR96_DESCRAM_TAP2 0x01000 +#define PAR96_DESCRAM_TAP3 0x00001 + +#define PAR96_DESCRAM_TAPSH1 17 +#define PAR96_DESCRAM_TAPSH2 12 +#define PAR96_DESCRAM_TAPSH3 0 + +#define PAR96_SCRAM_TAP1 0x20000 /* X^17 */ +#define PAR96_SCRAM_TAPN 0x00021 /* X^0+X^5 */ + +/* --------------------------------------------------------------------- */ + +static inline void par96_tx(struct net_device *dev, struct baycom_state *bc) +{ + int i; + unsigned int data = hdlcdrv_getbits(&bc->hdrv); + struct parport *pp = bc->pdev->port; + + for(i = 0; i < PAR96_BURSTBITS; i++, data >>= 1) { + unsigned char val = PAR97_POWER; + bc->modem.par96.scram = ((bc->modem.par96.scram << 1) | + (bc->modem.par96.scram & 1)); + if (!(data & 1)) + bc->modem.par96.scram ^= 1; + if (bc->modem.par96.scram & (PAR96_SCRAM_TAP1 << 1)) + bc->modem.par96.scram ^= + (PAR96_SCRAM_TAPN << 1); + if (bc->modem.par96.scram & (PAR96_SCRAM_TAP1 << 2)) + val |= PAR96_TXBIT; + pp->ops->write_data(pp, val); + pp->ops->write_data(pp, val | PAR96_BURST); + } +} + +/* --------------------------------------------------------------------- */ + +static inline void par96_rx(struct net_device *dev, struct baycom_state *bc) +{ + int i; + unsigned int data, mask, mask2, descx; + struct parport *pp = bc->pdev->port; + + /* + * do receiver; differential decode and descramble on the fly + */ + for(data = i = 0; i < PAR96_BURSTBITS; i++) { + bc->modem.par96.descram = (bc->modem.par96.descram << 1); + if (pp->ops->read_status(pp) & PAR96_RXBIT) + bc->modem.par96.descram |= 1; + descx = bc->modem.par96.descram ^ + (bc->modem.par96.descram >> 1); + /* now the diff decoded data is inverted in descram */ + pp->ops->write_data(pp, PAR97_POWER | PAR96_PTT); + descx ^= ((descx >> PAR96_DESCRAM_TAPSH1) ^ + (descx >> PAR96_DESCRAM_TAPSH2)); + data >>= 1; + if (!(descx & 1)) + data |= 0x8000; + pp->ops->write_data(pp, PAR97_POWER | PAR96_PTT | PAR96_BURST); + } + hdlcdrv_putbits(&bc->hdrv, data); + /* + * do DCD algorithm + */ + if (bc->options & BAYCOM_OPTIONS_SOFTDCD) { + bc->modem.par96.dcd_shreg = (bc->modem.par96.dcd_shreg >> 16) + | (data << 16); + /* search for flags and set the dcd counter appropriately */ + for(mask = 0x1fe00, mask2 = 0xfc00, i = 0; + i < PAR96_BURSTBITS; i++, mask <<= 1, mask2 <<= 1) + if ((bc->modem.par96.dcd_shreg & mask) == mask2) + bc->modem.par96.dcd_count = HDLCDRV_MAXFLEN+4; + /* check for abort/noise sequences */ + for(mask = 0x1fe00, mask2 = 0x1fe00, i = 0; + i < PAR96_BURSTBITS; i++, mask <<= 1, mask2 <<= 1) + if (((bc->modem.par96.dcd_shreg & mask) == mask2) && + (bc->modem.par96.dcd_count >= 0)) + bc->modem.par96.dcd_count -= HDLCDRV_MAXFLEN-10; + /* decrement and set the dcd variable */ + if (bc->modem.par96.dcd_count >= 0) + bc->modem.par96.dcd_count -= 2; + hdlcdrv_setdcd(&bc->hdrv, bc->modem.par96.dcd_count > 0); + } else { + hdlcdrv_setdcd(&bc->hdrv, !!(pp->ops->read_status(pp) & PAR96_DCD)); + } +} + +/* --------------------------------------------------------------------- */ + +static void par96_interrupt(void *dev_id) +{ + struct net_device *dev = dev_id; + struct baycom_state *bc = netdev_priv(dev); + + baycom_int_freq(bc); + /* + * check if transmitter active + */ + if (hdlcdrv_ptt(&bc->hdrv)) + par96_tx(dev, bc); + else { + par96_rx(dev, bc); + if (--bc->modem.arb_divider <= 0) { + bc->modem.arb_divider = 6; + local_irq_enable(); + hdlcdrv_arbitrate(dev, &bc->hdrv); + } + } + local_irq_enable(); + hdlcdrv_transmitter(dev, &bc->hdrv); + hdlcdrv_receiver(dev, &bc->hdrv); + local_irq_disable(); +} + +/* --------------------------------------------------------------------- */ + +static void par96_wakeup(void *handle) +{ + struct net_device *dev = (struct net_device *)handle; + struct baycom_state *bc = netdev_priv(dev); + + printk(KERN_DEBUG "baycom_par: %s: why am I being woken up?\n", dev->name); + if (!parport_claim(bc->pdev)) + printk(KERN_DEBUG "baycom_par: %s: I'm broken.\n", dev->name); +} + +/* --------------------------------------------------------------------- */ + +static int par96_open(struct net_device *dev) +{ + struct baycom_state *bc = netdev_priv(dev); + struct pardev_cb par_cb; + struct parport *pp; + int i; + + if (!dev || !bc) + return -ENXIO; + pp = parport_find_base(dev->base_addr); + if (!pp) { + printk(KERN_ERR "baycom_par: parport at 0x%lx unknown\n", dev->base_addr); + return -ENXIO; + } + if (pp->irq < 0) { + printk(KERN_ERR "baycom_par: parport at 0x%lx has no irq\n", pp->base); + parport_put_port(pp); + return -ENXIO; + } + if ((~pp->modes) & (PARPORT_MODE_PCSPP | PARPORT_MODE_SAFEININT)) { + printk(KERN_ERR "baycom_par: parport at 0x%lx cannot be used\n", pp->base); + parport_put_port(pp); + return -ENXIO; + } + memset(&bc->modem, 0, sizeof(bc->modem)); + bc->hdrv.par.bitrate = 9600; + memset(&par_cb, 0, sizeof(par_cb)); + par_cb.wakeup = par96_wakeup; + par_cb.irq_func = par96_interrupt; + par_cb.private = (void *)dev; + par_cb.flags = PARPORT_DEV_EXCL; + for (i = 0; i < NR_PORTS; i++) + if (baycom_device[i] == dev) + break; + + if (i == NR_PORTS) { + pr_err("%s: no device found\n", bc_drvname); + parport_put_port(pp); + return -ENODEV; + } + bc->pdev = parport_register_dev_model(pp, dev->name, &par_cb, i); + parport_put_port(pp); + if (!bc->pdev) { + printk(KERN_ERR "baycom_par: cannot register parport at 0x%lx\n", dev->base_addr); + return -ENXIO; + } + if (parport_claim(bc->pdev)) { + printk(KERN_ERR "baycom_par: parport at 0x%lx busy\n", pp->base); + parport_unregister_device(bc->pdev); + return -EBUSY; + } + pp = bc->pdev->port; + dev->irq = pp->irq; + pp->ops->data_forward(pp); + bc->hdrv.par.bitrate = 9600; + pp->ops->write_data(pp, PAR96_PTT | PAR97_POWER); /* switch off PTT */ + pp->ops->enable_irq(pp); + printk(KERN_INFO "%s: par96 at iobase 0x%lx irq %u options 0x%x\n", + bc_drvname, dev->base_addr, dev->irq, bc->options); + return 0; +} + +/* --------------------------------------------------------------------- */ + +static int par96_close(struct net_device *dev) +{ + struct baycom_state *bc = netdev_priv(dev); + struct parport *pp; + + if (!dev || !bc) + return -EINVAL; + pp = bc->pdev->port; + /* disable interrupt */ + pp->ops->disable_irq(pp); + /* switch off PTT */ + pp->ops->write_data(pp, PAR96_PTT | PAR97_POWER); + parport_release(bc->pdev); + parport_unregister_device(bc->pdev); + printk(KERN_INFO "%s: close par96 at iobase 0x%lx irq %u\n", + bc_drvname, dev->base_addr, dev->irq); + return 0; +} + +/* --------------------------------------------------------------------- */ +/* + * ===================== hdlcdrv driver interface ========================= + */ + +static int baycom_ioctl(struct net_device *dev, struct ifreq *ifr, + struct hdlcdrv_ioctl *hi, int cmd); + +/* --------------------------------------------------------------------- */ + +static const struct hdlcdrv_ops par96_ops = { + .drvname = bc_drvname, + .drvinfo = bc_drvinfo, + .open = par96_open, + .close = par96_close, + .ioctl = baycom_ioctl +}; + +/* --------------------------------------------------------------------- */ + +static int baycom_setmode(struct baycom_state *bc, const char *modestr) +{ + if (!strncmp(modestr, "picpar", 6)) + bc->options = 0; + else if (!strncmp(modestr, "par96", 5)) + bc->options = BAYCOM_OPTIONS_SOFTDCD; + else + bc->options = !!strchr(modestr, '*'); + return 0; +} + +/* --------------------------------------------------------------------- */ + +static int baycom_ioctl(struct net_device *dev, struct ifreq *ifr, + struct hdlcdrv_ioctl *hi, int cmd) +{ + struct baycom_state *bc; + struct baycom_ioctl bi; + + if (!dev) + return -EINVAL; + + bc = netdev_priv(dev); + BUG_ON(bc->hdrv.magic != HDLCDRV_MAGIC); + + if (cmd != SIOCDEVPRIVATE) + return -ENOIOCTLCMD; + switch (hi->cmd) { + default: + break; + + case HDLCDRVCTL_GETMODE: + strcpy(hi->data.modename, bc->options ? "par96" : "picpar"); + if (copy_to_user(ifr->ifr_data, hi, sizeof(struct hdlcdrv_ioctl))) + return -EFAULT; + return 0; + + case HDLCDRVCTL_SETMODE: + if (netif_running(dev) || !capable(CAP_NET_ADMIN)) + return -EACCES; + hi->data.modename[sizeof(hi->data.modename)-1] = '\0'; + return baycom_setmode(bc, hi->data.modename); + + case HDLCDRVCTL_MODELIST: + strcpy(hi->data.modename, "par96,picpar"); + if (copy_to_user(ifr->ifr_data, hi, sizeof(struct hdlcdrv_ioctl))) + return -EFAULT; + return 0; + + case HDLCDRVCTL_MODEMPARMASK: + return HDLCDRV_PARMASK_IOBASE; + + } + + if (copy_from_user(&bi, ifr->ifr_data, sizeof(bi))) + return -EFAULT; + switch (bi.cmd) { + default: + return -ENOIOCTLCMD; + +#ifdef BAYCOM_DEBUG + case BAYCOMCTL_GETDEBUG: + bi.data.dbg.debug1 = bc->hdrv.ptt_keyed; + bi.data.dbg.debug2 = bc->debug_vals.last_intcnt; + bi.data.dbg.debug3 = bc->debug_vals.last_pllcorr; + break; +#endif /* BAYCOM_DEBUG */ + + } + if (copy_to_user(ifr->ifr_data, &bi, sizeof(bi))) + return -EFAULT; + return 0; + +} + +/* --------------------------------------------------------------------- */ + +/* + * command line settable parameters + */ +static char *mode[NR_PORTS] = { "picpar", }; +static int iobase[NR_PORTS] = { 0x378, }; + +module_param_array(mode, charp, NULL, 0); +MODULE_PARM_DESC(mode, "baycom operating mode; eg. par96 or picpar"); +module_param_hw_array(iobase, int, ioport, NULL, 0); +MODULE_PARM_DESC(iobase, "baycom io base address"); + +MODULE_AUTHOR("Thomas M. Sailer, sailer@ife.ee.ethz.ch, hb9jnx@hb9w.che.eu"); +MODULE_DESCRIPTION("Baycom par96 and picpar amateur radio modem driver"); +MODULE_LICENSE("GPL"); + +/* --------------------------------------------------------------------- */ + +static int baycom_par_probe(struct pardevice *par_dev) +{ + struct device_driver *drv = par_dev->dev.driver; + int len = strlen(drv->name); + + if (strncmp(par_dev->name, drv->name, len)) + return -ENODEV; + + return 0; +} + +static struct parport_driver baycom_par_driver = { + .name = "bcp", + .probe = baycom_par_probe, + .devmodel = true, +}; + +static int __init init_baycompar(void) +{ + int i, found = 0, ret; + char set_hw = 1; + + printk(bc_drvinfo); + + ret = parport_register_driver(&baycom_par_driver); + if (ret) + return ret; + + /* + * register net devices + */ + for (i = 0; i < NR_PORTS; i++) { + struct net_device *dev; + struct baycom_state *bc; + char ifname[IFNAMSIZ]; + + sprintf(ifname, "bcp%d", i); + + if (!mode[i]) + set_hw = 0; + if (!set_hw) + iobase[i] = 0; + + dev = hdlcdrv_register(&par96_ops, + sizeof(struct baycom_state), + ifname, iobase[i], 0, 0); + if (IS_ERR(dev)) + break; + + bc = netdev_priv(dev); + if (set_hw && baycom_setmode(bc, mode[i])) + set_hw = 0; + found++; + baycom_device[i] = dev; + } + + if (!found) { + parport_unregister_driver(&baycom_par_driver); + return -ENXIO; + } + return 0; +} + +static void __exit cleanup_baycompar(void) +{ + int i; + + for(i = 0; i < NR_PORTS; i++) { + struct net_device *dev = baycom_device[i]; + + if (dev) + hdlcdrv_unregister(dev); + } + parport_unregister_driver(&baycom_par_driver); +} + +module_init(init_baycompar); +module_exit(cleanup_baycompar); + +/* --------------------------------------------------------------------- */ + +#ifndef MODULE + +/* + * format: baycom_par=io,mode + * mode: par96,picpar + */ + +static int __init baycom_par_setup(char *str) +{ + static unsigned nr_dev; + int ints[2]; + + if (nr_dev >= NR_PORTS) + return 0; + str = get_options(str, 2, ints); + if (ints[0] < 1) + return 0; + mode[nr_dev] = str; + iobase[nr_dev] = ints[1]; + nr_dev++; + return 1; +} + +__setup("baycom_par=", baycom_par_setup); + +#endif /* MODULE */ +/* --------------------------------------------------------------------- */ diff --git a/drivers/net/hamradio/baycom_ser_fdx.c b/drivers/net/hamradio/baycom_ser_fdx.c new file mode 100644 index 000000000..190f66c88 --- /dev/null +++ b/drivers/net/hamradio/baycom_ser_fdx.c @@ -0,0 +1,718 @@ +/*****************************************************************************/ + +/* + * baycom_ser_fdx.c -- baycom ser12 fullduplex radio modem driver. + * + * Copyright (C) 1996-2000 Thomas Sailer (sailer@ife.ee.ethz.ch) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + * Please note that the GPL allows you to use the driver, NOT the radio. + * In order to use the radio, you need a license from the communications + * authority of your country. + * + * + * Supported modems + * + * ser12: This is a very simple 1200 baud AFSK modem. The modem consists only + * of a modulator/demodulator chip, usually a TI TCM3105. The computer + * is responsible for regenerating the receiver bit clock, as well as + * for handling the HDLC protocol. The modem connects to a serial port, + * hence the name. Since the serial port is not used as an async serial + * port, the kernel driver for serial ports cannot be used, and this + * driver only supports standard serial hardware (8250, 16450, 16550A) + * + * This modem usually draws its supply current out of the otherwise unused + * TXD pin of the serial port. Thus a contiguous stream of 0x00-bytes + * is transmitted to achieve a positive supply voltage. + * + * hsk: This is a 4800 baud FSK modem, designed for TNC use. It works fine + * in 'baycom-mode' :-) In contrast to the TCM3105 modem, power is + * externally supplied. So there's no need to provide the 0x00-byte-stream + * when receiving or idle, which drastically reduces interrupt load. + * + * Command line options (insmod command line) + * + * mode ser# hardware DCD + * ser#* software DCD + * ser#+ hardware DCD, inverted signal at DCD pin + * '#' denotes the baud rate / 100, eg. ser12* is '1200 baud, soft DCD' + * iobase base address of the port; common values are 0x3f8, 0x2f8, 0x3e8, 0x2e8 + * baud baud rate (between 300 and 4800) + * irq interrupt line of the port; common values are 4,3 + * + * + * History: + * 0.1 26.06.1996 Adapted from baycom.c and made network driver interface + * 18.10.1996 Changed to new user space access routines (copy_{to,from}_user) + * 0.3 26.04.1997 init code/data tagged + * 0.4 08.07.1997 alternative ser12 decoding algorithm (uses delta CTS ints) + * 0.5 11.11.1997 ser12/par96 split into separate files + * 0.6 24.01.1998 Thorsten Kranzkowski, dl8bcu and Thomas Sailer: + * reduced interrupt load in transmit case + * reworked receiver + * 0.7 03.08.1999 adapt to Linus' new __setup/__initcall + * 0.8 10.08.1999 use module_init/module_exit + * 0.9 12.02.2000 adapted to softnet driver interface + * 0.10 03.07.2000 fix interface name handling + */ + +/*****************************************************************************/ + +#include <linux/capability.h> +#include <linux/module.h> +#include <linux/ioport.h> +#include <linux/string.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/hdlcdrv.h> +#include <linux/baycom.h> +#include <linux/jiffies.h> +#include <linux/time64.h> + +#include <linux/uaccess.h> +#include <asm/io.h> +#include <asm/irq.h> + +/* --------------------------------------------------------------------- */ + +#define BAYCOM_DEBUG + +/* --------------------------------------------------------------------- */ + +static const char bc_drvname[] = "baycom_ser_fdx"; +static const char bc_drvinfo[] = KERN_INFO "baycom_ser_fdx: (C) 1996-2000 Thomas Sailer, HB9JNX/AE4WA\n" +"baycom_ser_fdx: version 0.10\n"; + +/* --------------------------------------------------------------------- */ + +#define NR_PORTS 4 + +static struct net_device *baycom_device[NR_PORTS]; + +/* --------------------------------------------------------------------- */ + +#define RBR(iobase) (iobase+0) +#define THR(iobase) (iobase+0) +#define IER(iobase) (iobase+1) +#define IIR(iobase) (iobase+2) +#define FCR(iobase) (iobase+2) +#define LCR(iobase) (iobase+3) +#define MCR(iobase) (iobase+4) +#define LSR(iobase) (iobase+5) +#define MSR(iobase) (iobase+6) +#define SCR(iobase) (iobase+7) +#define DLL(iobase) (iobase+0) +#define DLM(iobase) (iobase+1) + +#define SER12_EXTENT 8 + +/* ---------------------------------------------------------------------- */ +/* + * Information that need to be kept for each board. + */ + +struct baycom_state { + struct hdlcdrv_state hdrv; + + unsigned int baud, baud_us, baud_arbdiv, baud_uartdiv, baud_dcdtimeout; + int opt_dcd; + + struct modem_state { + unsigned char flags; + unsigned char ptt; + unsigned int shreg; + struct modem_state_ser12 { + unsigned char tx_bit; + unsigned char last_rxbit; + int dcd_sum0, dcd_sum1, dcd_sum2; + int dcd_time; + unsigned int pll_time; + unsigned int txshreg; + } ser12; + } modem; + +#ifdef BAYCOM_DEBUG + struct debug_vals { + unsigned long last_jiffies; + unsigned cur_intcnt; + unsigned last_intcnt; + int cur_pllcorr; + int last_pllcorr; + } debug_vals; +#endif /* BAYCOM_DEBUG */ +}; + +/* --------------------------------------------------------------------- */ + +static inline void baycom_int_freq(struct baycom_state *bc) +{ +#ifdef BAYCOM_DEBUG + unsigned long cur_jiffies = jiffies; + /* + * measure the interrupt frequency + */ + bc->debug_vals.cur_intcnt++; + if (time_after_eq(cur_jiffies, bc->debug_vals.last_jiffies + HZ)) { + bc->debug_vals.last_jiffies = cur_jiffies; + bc->debug_vals.last_intcnt = bc->debug_vals.cur_intcnt; + bc->debug_vals.cur_intcnt = 0; + bc->debug_vals.last_pllcorr = bc->debug_vals.cur_pllcorr; + bc->debug_vals.cur_pllcorr = 0; + } +#endif /* BAYCOM_DEBUG */ +} + +/* --------------------------------------------------------------------- */ +/* + * ===================== SER12 specific routines ========================= + */ + +/* --------------------------------------------------------------------- */ + +static inline void ser12_set_divisor(struct net_device *dev, + unsigned int divisor) +{ + outb(0x81, LCR(dev->base_addr)); /* DLAB = 1 */ + outb(divisor, DLL(dev->base_addr)); + outb(divisor >> 8, DLM(dev->base_addr)); + outb(0x01, LCR(dev->base_addr)); /* word length = 6 */ + /* + * make sure the next interrupt is generated; + * 0 must be used to power the modem; the modem draws its + * power from the TxD line + */ + outb(0x00, THR(dev->base_addr)); + /* + * it is important not to set the divider while transmitting; + * this reportedly makes some UARTs generating interrupts + * in the hundredthousands per second region + * Reported by: Ignacio.Arenaza@studi.epfl.ch (Ignacio Arenaza Nuno) + */ +} + +/* --------------------------------------------------------------------- */ + +#if 0 +static inline unsigned int hweight16(unsigned int w) + __attribute__ ((unused)); +static inline unsigned int hweight8(unsigned int w) + __attribute__ ((unused)); + +static inline unsigned int hweight16(unsigned int w) +{ + unsigned short res = (w & 0x5555) + ((w >> 1) & 0x5555); + res = (res & 0x3333) + ((res >> 2) & 0x3333); + res = (res & 0x0F0F) + ((res >> 4) & 0x0F0F); + return (res & 0x00FF) + ((res >> 8) & 0x00FF); +} + +static inline unsigned int hweight8(unsigned int w) +{ + unsigned short res = (w & 0x55) + ((w >> 1) & 0x55); + res = (res & 0x33) + ((res >> 2) & 0x33); + return (res & 0x0F) + ((res >> 4) & 0x0F); +} +#endif + +/* --------------------------------------------------------------------- */ + +static __inline__ void ser12_rx(struct net_device *dev, struct baycom_state *bc, struct timespec64 *ts, unsigned char curs) +{ + int timediff; + int bdus8 = bc->baud_us >> 3; + int bdus4 = bc->baud_us >> 2; + int bdus2 = bc->baud_us >> 1; + + timediff = 1000000 + ts->tv_nsec / NSEC_PER_USEC - + bc->modem.ser12.pll_time; + while (timediff >= 500000) + timediff -= 1000000; + while (timediff >= bdus2) { + timediff -= bc->baud_us; + bc->modem.ser12.pll_time += bc->baud_us; + bc->modem.ser12.dcd_time--; + /* first check if there is room to add a bit */ + if (bc->modem.shreg & 1) { + hdlcdrv_putbits(&bc->hdrv, (bc->modem.shreg >> 1) ^ 0xffff); + bc->modem.shreg = 0x10000; + } + /* add a one bit */ + bc->modem.shreg >>= 1; + } + if (bc->modem.ser12.dcd_time <= 0) { + if (!bc->opt_dcd) + hdlcdrv_setdcd(&bc->hdrv, (bc->modem.ser12.dcd_sum0 + + bc->modem.ser12.dcd_sum1 + + bc->modem.ser12.dcd_sum2) < 0); + bc->modem.ser12.dcd_sum2 = bc->modem.ser12.dcd_sum1; + bc->modem.ser12.dcd_sum1 = bc->modem.ser12.dcd_sum0; + bc->modem.ser12.dcd_sum0 = 2; /* slight bias */ + bc->modem.ser12.dcd_time += 120; + } + if (bc->modem.ser12.last_rxbit != curs) { + bc->modem.ser12.last_rxbit = curs; + bc->modem.shreg |= 0x10000; + /* adjust the PLL */ + if (timediff > 0) + bc->modem.ser12.pll_time += bdus8; + else + bc->modem.ser12.pll_time += 1000000 - bdus8; + /* update DCD */ + if (abs(timediff) > bdus4) + bc->modem.ser12.dcd_sum0 += 4; + else + bc->modem.ser12.dcd_sum0--; +#ifdef BAYCOM_DEBUG + bc->debug_vals.cur_pllcorr = timediff; +#endif /* BAYCOM_DEBUG */ + } + while (bc->modem.ser12.pll_time >= 1000000) + bc->modem.ser12.pll_time -= 1000000; +} + +/* --------------------------------------------------------------------- */ + +static irqreturn_t ser12_interrupt(int irq, void *dev_id) +{ + struct net_device *dev = (struct net_device *)dev_id; + struct baycom_state *bc = netdev_priv(dev); + struct timespec64 ts; + unsigned char iir, msr; + unsigned int txcount = 0; + + if (!bc || bc->hdrv.magic != HDLCDRV_MAGIC) + return IRQ_NONE; + /* fast way out for shared irq */ + if ((iir = inb(IIR(dev->base_addr))) & 1) + return IRQ_NONE; + /* get current time */ + ktime_get_ts64(&ts); + msr = inb(MSR(dev->base_addr)); + /* delta DCD */ + if ((msr & 8) && bc->opt_dcd) + hdlcdrv_setdcd(&bc->hdrv, !((msr ^ bc->opt_dcd) & 0x80)); + do { + switch (iir & 6) { + case 6: + inb(LSR(dev->base_addr)); + break; + + case 4: + inb(RBR(dev->base_addr)); + break; + + case 2: + /* + * make sure the next interrupt is generated; + * 0 must be used to power the modem; the modem draws its + * power from the TxD line + */ + outb(0x00, THR(dev->base_addr)); + baycom_int_freq(bc); + txcount++; + /* + * first output the last bit (!) then call HDLC transmitter, + * since this may take quite long + */ + if (bc->modem.ptt) + outb(0x0e | (!!bc->modem.ser12.tx_bit), MCR(dev->base_addr)); + else + outb(0x0d, MCR(dev->base_addr)); /* transmitter off */ + break; + + default: + msr = inb(MSR(dev->base_addr)); + /* delta DCD */ + if ((msr & 8) && bc->opt_dcd) + hdlcdrv_setdcd(&bc->hdrv, !((msr ^ bc->opt_dcd) & 0x80)); + break; + } + iir = inb(IIR(dev->base_addr)); + } while (!(iir & 1)); + ser12_rx(dev, bc, &ts, msr & 0x10); /* CTS */ + if (bc->modem.ptt && txcount) { + if (bc->modem.ser12.txshreg <= 1) { + bc->modem.ser12.txshreg = 0x10000 | hdlcdrv_getbits(&bc->hdrv); + if (!hdlcdrv_ptt(&bc->hdrv)) { + ser12_set_divisor(dev, 115200/100/8); + bc->modem.ptt = 0; + goto end_transmit; + } + } + bc->modem.ser12.tx_bit = !(bc->modem.ser12.tx_bit ^ (bc->modem.ser12.txshreg & 1)); + bc->modem.ser12.txshreg >>= 1; + } + end_transmit: + local_irq_enable(); + if (!bc->modem.ptt && txcount) { + hdlcdrv_arbitrate(dev, &bc->hdrv); + if (hdlcdrv_ptt(&bc->hdrv)) { + ser12_set_divisor(dev, bc->baud_uartdiv); + bc->modem.ser12.txshreg = 1; + bc->modem.ptt = 1; + } + } + hdlcdrv_transmitter(dev, &bc->hdrv); + hdlcdrv_receiver(dev, &bc->hdrv); + local_irq_disable(); + return IRQ_HANDLED; +} + +/* --------------------------------------------------------------------- */ + +enum uart { c_uart_unknown, c_uart_8250, + c_uart_16450, c_uart_16550, c_uart_16550A}; +static const char *uart_str[] = { + "unknown", "8250", "16450", "16550", "16550A" +}; + +static enum uart ser12_check_uart(unsigned int iobase) +{ + unsigned char b1,b2,b3; + enum uart u; + enum uart uart_tab[] = + { c_uart_16450, c_uart_unknown, c_uart_16550, c_uart_16550A }; + + b1 = inb(MCR(iobase)); + outb(b1 | 0x10, MCR(iobase)); /* loopback mode */ + b2 = inb(MSR(iobase)); + outb(0x1a, MCR(iobase)); + b3 = inb(MSR(iobase)) & 0xf0; + outb(b1, MCR(iobase)); /* restore old values */ + outb(b2, MSR(iobase)); + if (b3 != 0x90) + return c_uart_unknown; + inb(RBR(iobase)); + inb(RBR(iobase)); + outb(0x01, FCR(iobase)); /* enable FIFOs */ + u = uart_tab[(inb(IIR(iobase)) >> 6) & 3]; + if (u == c_uart_16450) { + outb(0x5a, SCR(iobase)); + b1 = inb(SCR(iobase)); + outb(0xa5, SCR(iobase)); + b2 = inb(SCR(iobase)); + if ((b1 != 0x5a) || (b2 != 0xa5)) + u = c_uart_8250; + } + return u; +} + +/* --------------------------------------------------------------------- */ + +static int ser12_open(struct net_device *dev) +{ + struct baycom_state *bc = netdev_priv(dev); + enum uart u; + + if (!dev || !bc) + return -ENXIO; + if (!dev->base_addr || dev->base_addr > 0xffff-SER12_EXTENT || + dev->irq < 2 || dev->irq > nr_irqs) { + printk(KERN_INFO "baycom_ser_fdx: invalid portnumber (max %u) " + "or irq (2 <= irq <= %d)\n", + 0xffff-SER12_EXTENT, nr_irqs); + return -ENXIO; + } + if (bc->baud < 300 || bc->baud > 4800) { + printk(KERN_INFO "baycom_ser_fdx: invalid baudrate " + "(300...4800)\n"); + return -EINVAL; + } + if (!request_region(dev->base_addr, SER12_EXTENT, "baycom_ser_fdx")) { + printk(KERN_WARNING "BAYCOM_SER_FSX: I/O port 0x%04lx busy\n", + dev->base_addr); + return -EACCES; + } + memset(&bc->modem, 0, sizeof(bc->modem)); + bc->hdrv.par.bitrate = bc->baud; + bc->baud_us = 1000000/bc->baud; + bc->baud_uartdiv = (115200/8)/bc->baud; + if ((u = ser12_check_uart(dev->base_addr)) == c_uart_unknown){ + release_region(dev->base_addr, SER12_EXTENT); + return -EIO; + } + outb(0, FCR(dev->base_addr)); /* disable FIFOs */ + outb(0x0d, MCR(dev->base_addr)); + outb(0, IER(dev->base_addr)); + if (request_irq(dev->irq, ser12_interrupt, IRQF_SHARED, + "baycom_ser_fdx", dev)) { + release_region(dev->base_addr, SER12_EXTENT); + return -EBUSY; + } + /* + * set the SIO to 6 Bits/character; during receive, + * the baud rate is set to produce 100 ints/sec + * to feed the channel arbitration process, + * during transmit to baud ints/sec to run + * the transmitter + */ + ser12_set_divisor(dev, 115200/100/8); + /* + * enable transmitter empty interrupt and modem status interrupt + */ + outb(0x0a, IER(dev->base_addr)); + /* + * make sure the next interrupt is generated; + * 0 must be used to power the modem; the modem draws its + * power from the TxD line + */ + outb(0x00, THR(dev->base_addr)); + hdlcdrv_setdcd(&bc->hdrv, 0); + printk(KERN_INFO "%s: ser_fdx at iobase 0x%lx irq %u baud %u uart %s\n", + bc_drvname, dev->base_addr, dev->irq, bc->baud, uart_str[u]); + return 0; +} + +/* --------------------------------------------------------------------- */ + +static int ser12_close(struct net_device *dev) +{ + struct baycom_state *bc = netdev_priv(dev); + + if (!dev || !bc) + return -EINVAL; + /* + * disable interrupts + */ + outb(0, IER(dev->base_addr)); + outb(1, MCR(dev->base_addr)); + free_irq(dev->irq, dev); + release_region(dev->base_addr, SER12_EXTENT); + printk(KERN_INFO "%s: close ser_fdx at iobase 0x%lx irq %u\n", + bc_drvname, dev->base_addr, dev->irq); + return 0; +} + +/* --------------------------------------------------------------------- */ +/* + * ===================== hdlcdrv driver interface ========================= + */ + +/* --------------------------------------------------------------------- */ + +static int baycom_ioctl(struct net_device *dev, struct ifreq *ifr, + struct hdlcdrv_ioctl *hi, int cmd); + +/* --------------------------------------------------------------------- */ + +static const struct hdlcdrv_ops ser12_ops = { + .drvname = bc_drvname, + .drvinfo = bc_drvinfo, + .open = ser12_open, + .close = ser12_close, + .ioctl = baycom_ioctl, +}; + +/* --------------------------------------------------------------------- */ + +static int baycom_setmode(struct baycom_state *bc, const char *modestr) +{ + unsigned int baud; + + if (!strncmp(modestr, "ser", 3)) { + baud = simple_strtoul(modestr+3, NULL, 10); + if (baud >= 3 && baud <= 48) + bc->baud = baud*100; + } + if (strchr(modestr, '*')) + bc->opt_dcd = 0; + else if (strchr(modestr, '+')) + bc->opt_dcd = -1; + else + bc->opt_dcd = 1; + return 0; +} + +/* --------------------------------------------------------------------- */ + +static int baycom_ioctl(struct net_device *dev, struct ifreq *ifr, + struct hdlcdrv_ioctl *hi, int cmd) +{ + struct baycom_state *bc; + struct baycom_ioctl bi; + + if (!dev) + return -EINVAL; + + bc = netdev_priv(dev); + BUG_ON(bc->hdrv.magic != HDLCDRV_MAGIC); + + if (cmd != SIOCDEVPRIVATE) + return -ENOIOCTLCMD; + switch (hi->cmd) { + default: + break; + + case HDLCDRVCTL_GETMODE: + sprintf(hi->data.modename, "ser%u", bc->baud / 100); + if (bc->opt_dcd <= 0) + strcat(hi->data.modename, (!bc->opt_dcd) ? "*" : "+"); + if (copy_to_user(ifr->ifr_data, hi, sizeof(struct hdlcdrv_ioctl))) + return -EFAULT; + return 0; + + case HDLCDRVCTL_SETMODE: + if (netif_running(dev) || !capable(CAP_NET_ADMIN)) + return -EACCES; + hi->data.modename[sizeof(hi->data.modename)-1] = '\0'; + return baycom_setmode(bc, hi->data.modename); + + case HDLCDRVCTL_MODELIST: + strcpy(hi->data.modename, "ser12,ser3,ser24"); + if (copy_to_user(ifr->ifr_data, hi, sizeof(struct hdlcdrv_ioctl))) + return -EFAULT; + return 0; + + case HDLCDRVCTL_MODEMPARMASK: + return HDLCDRV_PARMASK_IOBASE | HDLCDRV_PARMASK_IRQ; + + } + + if (copy_from_user(&bi, ifr->ifr_data, sizeof(bi))) + return -EFAULT; + switch (bi.cmd) { + default: + return -ENOIOCTLCMD; + +#ifdef BAYCOM_DEBUG + case BAYCOMCTL_GETDEBUG: + bi.data.dbg.debug1 = bc->hdrv.ptt_keyed; + bi.data.dbg.debug2 = bc->debug_vals.last_intcnt; + bi.data.dbg.debug3 = bc->debug_vals.last_pllcorr; + break; +#endif /* BAYCOM_DEBUG */ + + } + if (copy_to_user(ifr->ifr_data, &bi, sizeof(bi))) + return -EFAULT; + return 0; + +} + +/* --------------------------------------------------------------------- */ + +/* + * command line settable parameters + */ +static char *mode[NR_PORTS] = { "ser12*", }; +static int iobase[NR_PORTS] = { 0x3f8, }; +static int irq[NR_PORTS] = { 4, }; +static int baud[NR_PORTS] = { [0 ... NR_PORTS-1] = 1200 }; + +module_param_array(mode, charp, NULL, 0); +MODULE_PARM_DESC(mode, "baycom operating mode; * for software DCD"); +module_param_hw_array(iobase, int, ioport, NULL, 0); +MODULE_PARM_DESC(iobase, "baycom io base address"); +module_param_hw_array(irq, int, irq, NULL, 0); +MODULE_PARM_DESC(irq, "baycom irq number"); +module_param_array(baud, int, NULL, 0); +MODULE_PARM_DESC(baud, "baycom baud rate (300 to 4800)"); + +MODULE_AUTHOR("Thomas M. Sailer, sailer@ife.ee.ethz.ch, hb9jnx@hb9w.che.eu"); +MODULE_DESCRIPTION("Baycom ser12 full duplex amateur radio modem driver"); +MODULE_LICENSE("GPL"); + +/* --------------------------------------------------------------------- */ + +static int __init init_baycomserfdx(void) +{ + int i, found = 0; + char set_hw = 1; + + printk(bc_drvinfo); + /* + * register net devices + */ + for (i = 0; i < NR_PORTS; i++) { + struct net_device *dev; + struct baycom_state *bc; + char ifname[IFNAMSIZ]; + + sprintf(ifname, "bcsf%d", i); + + if (!mode[i]) + set_hw = 0; + if (!set_hw) + iobase[i] = irq[i] = 0; + + dev = hdlcdrv_register(&ser12_ops, + sizeof(struct baycom_state), + ifname, iobase[i], irq[i], 0); + if (IS_ERR(dev)) + break; + + bc = netdev_priv(dev); + if (set_hw && baycom_setmode(bc, mode[i])) + set_hw = 0; + bc->baud = baud[i]; + found++; + baycom_device[i] = dev; + } + + if (!found) + return -ENXIO; + return 0; +} + +static void __exit cleanup_baycomserfdx(void) +{ + int i; + + for(i = 0; i < NR_PORTS; i++) { + struct net_device *dev = baycom_device[i]; + if (dev) + hdlcdrv_unregister(dev); + } +} + +module_init(init_baycomserfdx); +module_exit(cleanup_baycomserfdx); + +/* --------------------------------------------------------------------- */ + +#ifndef MODULE + +/* + * format: baycom_ser_fdx=io,irq,mode + * mode: ser# hardware DCD + * ser#* software DCD + * ser#+ hardware DCD, inverted signal at DCD pin + * '#' denotes the baud rate / 100, eg. ser12* is '1200 baud, soft DCD' + */ + +static int __init baycom_ser_fdx_setup(char *str) +{ + static unsigned nr_dev; + int ints[4]; + + if (nr_dev >= NR_PORTS) + return 0; + str = get_options(str, 4, ints); + if (ints[0] < 2) + return 0; + mode[nr_dev] = str; + iobase[nr_dev] = ints[1]; + irq[nr_dev] = ints[2]; + if (ints[0] >= 3) + baud[nr_dev] = ints[3]; + nr_dev++; + return 1; +} + +__setup("baycom_ser_fdx=", baycom_ser_fdx_setup); + +#endif /* MODULE */ +/* --------------------------------------------------------------------- */ diff --git a/drivers/net/hamradio/baycom_ser_hdx.c b/drivers/net/hamradio/baycom_ser_hdx.c new file mode 100644 index 000000000..3c823c648 --- /dev/null +++ b/drivers/net/hamradio/baycom_ser_hdx.c @@ -0,0 +1,743 @@ +/*****************************************************************************/ + +/* + * baycom_ser_hdx.c -- baycom ser12 halfduplex radio modem driver. + * + * Copyright (C) 1996-2000 Thomas Sailer (sailer@ife.ee.ethz.ch) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + * Please note that the GPL allows you to use the driver, NOT the radio. + * In order to use the radio, you need a license from the communications + * authority of your country. + * + * + * Supported modems + * + * ser12: This is a very simple 1200 baud AFSK modem. The modem consists only + * of a modulator/demodulator chip, usually a TI TCM3105. The computer + * is responsible for regenerating the receiver bit clock, as well as + * for handling the HDLC protocol. The modem connects to a serial port, + * hence the name. Since the serial port is not used as an async serial + * port, the kernel driver for serial ports cannot be used, and this + * driver only supports standard serial hardware (8250, 16450, 16550A) + * + * + * Command line options (insmod command line) + * + * mode ser12 hardware DCD + * ser12* software DCD + * ser12@ hardware/software DCD, i.e. no explicit DCD signal but hardware + * mutes audio input to the modem + * ser12+ hardware DCD, inverted signal at DCD pin + * iobase base address of the port; common values are 0x3f8, 0x2f8, 0x3e8, 0x2e8 + * irq interrupt line of the port; common values are 4,3 + * + * + * History: + * 0.1 26.06.1996 Adapted from baycom.c and made network driver interface + * 18.10.1996 Changed to new user space access routines (copy_{to,from}_user) + * 0.3 26.04.1997 init code/data tagged + * 0.4 08.07.1997 alternative ser12 decoding algorithm (uses delta CTS ints) + * 0.5 11.11.1997 ser12/par96 split into separate files + * 0.6 14.04.1998 cleanups + * 0.7 03.08.1999 adapt to Linus' new __setup/__initcall + * 0.8 10.08.1999 use module_init/module_exit + * 0.9 12.02.2000 adapted to softnet driver interface + * 0.10 03.07.2000 fix interface name handling + */ + +/*****************************************************************************/ + +#include <linux/capability.h> +#include <linux/module.h> +#include <linux/ioport.h> +#include <linux/string.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/uaccess.h> +#include <asm/io.h> +#include <linux/hdlcdrv.h> +#include <linux/baycom.h> +#include <linux/jiffies.h> + +/* --------------------------------------------------------------------- */ + +#define BAYCOM_DEBUG + +/* --------------------------------------------------------------------- */ + +static const char bc_drvname[] = "baycom_ser_hdx"; +static const char bc_drvinfo[] = KERN_INFO "baycom_ser_hdx: (C) 1996-2000 Thomas Sailer, HB9JNX/AE4WA\n" +"baycom_ser_hdx: version 0.10\n"; + +/* --------------------------------------------------------------------- */ + +#define NR_PORTS 4 + +static struct net_device *baycom_device[NR_PORTS]; + +/* --------------------------------------------------------------------- */ + +#define RBR(iobase) (iobase+0) +#define THR(iobase) (iobase+0) +#define IER(iobase) (iobase+1) +#define IIR(iobase) (iobase+2) +#define FCR(iobase) (iobase+2) +#define LCR(iobase) (iobase+3) +#define MCR(iobase) (iobase+4) +#define LSR(iobase) (iobase+5) +#define MSR(iobase) (iobase+6) +#define SCR(iobase) (iobase+7) +#define DLL(iobase) (iobase+0) +#define DLM(iobase) (iobase+1) + +#define SER12_EXTENT 8 + +/* ---------------------------------------------------------------------- */ +/* + * Information that need to be kept for each board. + */ + +struct baycom_state { + struct hdlcdrv_state hdrv; + + int opt_dcd; + + struct modem_state { + short arb_divider; + unsigned char flags; + unsigned int shreg; + struct modem_state_ser12 { + unsigned char tx_bit; + int dcd_sum0, dcd_sum1, dcd_sum2; + unsigned char last_sample; + unsigned char last_rxbit; + unsigned int dcd_shreg; + unsigned int dcd_time; + unsigned int bit_pll; + unsigned char interm_sample; + } ser12; + } modem; + +#ifdef BAYCOM_DEBUG + struct debug_vals { + unsigned long last_jiffies; + unsigned cur_intcnt; + unsigned last_intcnt; + int cur_pllcorr; + int last_pllcorr; + } debug_vals; +#endif /* BAYCOM_DEBUG */ +}; + +/* --------------------------------------------------------------------- */ + +static inline void baycom_int_freq(struct baycom_state *bc) +{ +#ifdef BAYCOM_DEBUG + unsigned long cur_jiffies = jiffies; + /* + * measure the interrupt frequency + */ + bc->debug_vals.cur_intcnt++; + if (time_after_eq(cur_jiffies, bc->debug_vals.last_jiffies + HZ)) { + bc->debug_vals.last_jiffies = cur_jiffies; + bc->debug_vals.last_intcnt = bc->debug_vals.cur_intcnt; + bc->debug_vals.cur_intcnt = 0; + bc->debug_vals.last_pllcorr = bc->debug_vals.cur_pllcorr; + bc->debug_vals.cur_pllcorr = 0; + } +#endif /* BAYCOM_DEBUG */ +} + +/* --------------------------------------------------------------------- */ +/* + * ===================== SER12 specific routines ========================= + */ + +static inline void ser12_set_divisor(struct net_device *dev, + unsigned char divisor) +{ + outb(0x81, LCR(dev->base_addr)); /* DLAB = 1 */ + outb(divisor, DLL(dev->base_addr)); + outb(0, DLM(dev->base_addr)); + outb(0x01, LCR(dev->base_addr)); /* word length = 6 */ + /* + * make sure the next interrupt is generated; + * 0 must be used to power the modem; the modem draws its + * power from the TxD line + */ + outb(0x00, THR(dev->base_addr)); + /* + * it is important not to set the divider while transmitting; + * this reportedly makes some UARTs generating interrupts + * in the hundredthousands per second region + * Reported by: Ignacio.Arenaza@studi.epfl.ch (Ignacio Arenaza Nuno) + */ +} + +/* --------------------------------------------------------------------- */ + +/* + * must call the TX arbitrator every 10ms + */ +#define SER12_ARB_DIVIDER(bc) (bc->opt_dcd ? 24 : 36) + +#define SER12_DCD_INTERVAL(bc) (bc->opt_dcd ? 12 : 240) + +static inline void ser12_tx(struct net_device *dev, struct baycom_state *bc) +{ + /* one interrupt per channel bit */ + ser12_set_divisor(dev, 12); + /* + * first output the last bit (!) then call HDLC transmitter, + * since this may take quite long + */ + outb(0x0e | (!!bc->modem.ser12.tx_bit), MCR(dev->base_addr)); + if (bc->modem.shreg <= 1) + bc->modem.shreg = 0x10000 | hdlcdrv_getbits(&bc->hdrv); + bc->modem.ser12.tx_bit = !(bc->modem.ser12.tx_bit ^ + (bc->modem.shreg & 1)); + bc->modem.shreg >>= 1; +} + +/* --------------------------------------------------------------------- */ + +static inline void ser12_rx(struct net_device *dev, struct baycom_state *bc) +{ + unsigned char cur_s; + /* + * do demodulator + */ + cur_s = inb(MSR(dev->base_addr)) & 0x10; /* the CTS line */ + hdlcdrv_channelbit(&bc->hdrv, cur_s); + bc->modem.ser12.dcd_shreg = (bc->modem.ser12.dcd_shreg << 1) | + (cur_s != bc->modem.ser12.last_sample); + bc->modem.ser12.last_sample = cur_s; + if(bc->modem.ser12.dcd_shreg & 1) { + if (!bc->opt_dcd) { + unsigned int dcdspos, dcdsneg; + + dcdspos = dcdsneg = 0; + dcdspos += ((bc->modem.ser12.dcd_shreg >> 1) & 1); + if (!(bc->modem.ser12.dcd_shreg & 0x7ffffffe)) + dcdspos += 2; + dcdsneg += ((bc->modem.ser12.dcd_shreg >> 2) & 1); + dcdsneg += ((bc->modem.ser12.dcd_shreg >> 3) & 1); + dcdsneg += ((bc->modem.ser12.dcd_shreg >> 4) & 1); + + bc->modem.ser12.dcd_sum0 += 16*dcdspos - dcdsneg; + } else + bc->modem.ser12.dcd_sum0--; + } + if(!bc->modem.ser12.dcd_time) { + hdlcdrv_setdcd(&bc->hdrv, (bc->modem.ser12.dcd_sum0 + + bc->modem.ser12.dcd_sum1 + + bc->modem.ser12.dcd_sum2) < 0); + bc->modem.ser12.dcd_sum2 = bc->modem.ser12.dcd_sum1; + bc->modem.ser12.dcd_sum1 = bc->modem.ser12.dcd_sum0; + /* offset to ensure DCD off on silent input */ + bc->modem.ser12.dcd_sum0 = 2; + bc->modem.ser12.dcd_time = SER12_DCD_INTERVAL(bc); + } + bc->modem.ser12.dcd_time--; + if (!bc->opt_dcd) { + /* + * PLL code for the improved software DCD algorithm + */ + if (bc->modem.ser12.interm_sample) { + /* + * intermediate sample; set timing correction to normal + */ + ser12_set_divisor(dev, 4); + } else { + /* + * do PLL correction and call HDLC receiver + */ + switch (bc->modem.ser12.dcd_shreg & 7) { + case 1: /* transition too late */ + ser12_set_divisor(dev, 5); +#ifdef BAYCOM_DEBUG + bc->debug_vals.cur_pllcorr++; +#endif /* BAYCOM_DEBUG */ + break; + case 4: /* transition too early */ + ser12_set_divisor(dev, 3); +#ifdef BAYCOM_DEBUG + bc->debug_vals.cur_pllcorr--; +#endif /* BAYCOM_DEBUG */ + break; + default: + ser12_set_divisor(dev, 4); + break; + } + bc->modem.shreg >>= 1; + if (bc->modem.ser12.last_sample == + bc->modem.ser12.last_rxbit) + bc->modem.shreg |= 0x10000; + bc->modem.ser12.last_rxbit = + bc->modem.ser12.last_sample; + } + if (++bc->modem.ser12.interm_sample >= 3) + bc->modem.ser12.interm_sample = 0; + /* + * DCD stuff + */ + if (bc->modem.ser12.dcd_shreg & 1) { + unsigned int dcdspos, dcdsneg; + + dcdspos = dcdsneg = 0; + dcdspos += ((bc->modem.ser12.dcd_shreg >> 1) & 1); + dcdspos += (!(bc->modem.ser12.dcd_shreg & 0x7ffffffe)) + << 1; + dcdsneg += ((bc->modem.ser12.dcd_shreg >> 2) & 1); + dcdsneg += ((bc->modem.ser12.dcd_shreg >> 3) & 1); + dcdsneg += ((bc->modem.ser12.dcd_shreg >> 4) & 1); + + bc->modem.ser12.dcd_sum0 += 16*dcdspos - dcdsneg; + } + } else { + /* + * PLL algorithm for the hardware squelch DCD algorithm + */ + if (bc->modem.ser12.interm_sample) { + /* + * intermediate sample; set timing correction to normal + */ + ser12_set_divisor(dev, 6); + } else { + /* + * do PLL correction and call HDLC receiver + */ + switch (bc->modem.ser12.dcd_shreg & 3) { + case 1: /* transition too late */ + ser12_set_divisor(dev, 7); +#ifdef BAYCOM_DEBUG + bc->debug_vals.cur_pllcorr++; +#endif /* BAYCOM_DEBUG */ + break; + case 2: /* transition too early */ + ser12_set_divisor(dev, 5); +#ifdef BAYCOM_DEBUG + bc->debug_vals.cur_pllcorr--; +#endif /* BAYCOM_DEBUG */ + break; + default: + ser12_set_divisor(dev, 6); + break; + } + bc->modem.shreg >>= 1; + if (bc->modem.ser12.last_sample == + bc->modem.ser12.last_rxbit) + bc->modem.shreg |= 0x10000; + bc->modem.ser12.last_rxbit = + bc->modem.ser12.last_sample; + } + bc->modem.ser12.interm_sample = !bc->modem.ser12.interm_sample; + /* + * DCD stuff + */ + bc->modem.ser12.dcd_sum0 -= (bc->modem.ser12.dcd_shreg & 1); + } + outb(0x0d, MCR(dev->base_addr)); /* transmitter off */ + if (bc->modem.shreg & 1) { + hdlcdrv_putbits(&bc->hdrv, bc->modem.shreg >> 1); + bc->modem.shreg = 0x10000; + } + if(!bc->modem.ser12.dcd_time) { + if (bc->opt_dcd & 1) + hdlcdrv_setdcd(&bc->hdrv, !((inb(MSR(dev->base_addr)) ^ bc->opt_dcd) & 0x80)); + else + hdlcdrv_setdcd(&bc->hdrv, (bc->modem.ser12.dcd_sum0 + + bc->modem.ser12.dcd_sum1 + + bc->modem.ser12.dcd_sum2) < 0); + bc->modem.ser12.dcd_sum2 = bc->modem.ser12.dcd_sum1; + bc->modem.ser12.dcd_sum1 = bc->modem.ser12.dcd_sum0; + /* offset to ensure DCD off on silent input */ + bc->modem.ser12.dcd_sum0 = 2; + bc->modem.ser12.dcd_time = SER12_DCD_INTERVAL(bc); + } + bc->modem.ser12.dcd_time--; +} + +/* --------------------------------------------------------------------- */ + +static irqreturn_t ser12_interrupt(int irq, void *dev_id) +{ + struct net_device *dev = (struct net_device *)dev_id; + struct baycom_state *bc = netdev_priv(dev); + unsigned char iir; + + if (!dev || !bc || bc->hdrv.magic != HDLCDRV_MAGIC) + return IRQ_NONE; + /* fast way out */ + if ((iir = inb(IIR(dev->base_addr))) & 1) + return IRQ_NONE; + baycom_int_freq(bc); + do { + switch (iir & 6) { + case 6: + inb(LSR(dev->base_addr)); + break; + + case 4: + inb(RBR(dev->base_addr)); + break; + + case 2: + /* + * check if transmitter active + */ + if (hdlcdrv_ptt(&bc->hdrv)) + ser12_tx(dev, bc); + else { + ser12_rx(dev, bc); + bc->modem.arb_divider--; + } + outb(0x00, THR(dev->base_addr)); + break; + + default: + inb(MSR(dev->base_addr)); + break; + } + iir = inb(IIR(dev->base_addr)); + } while (!(iir & 1)); + if (bc->modem.arb_divider <= 0) { + bc->modem.arb_divider = SER12_ARB_DIVIDER(bc); + local_irq_enable(); + hdlcdrv_arbitrate(dev, &bc->hdrv); + } + local_irq_enable(); + hdlcdrv_transmitter(dev, &bc->hdrv); + hdlcdrv_receiver(dev, &bc->hdrv); + local_irq_disable(); + return IRQ_HANDLED; +} + +/* --------------------------------------------------------------------- */ + +enum uart { c_uart_unknown, c_uart_8250, + c_uart_16450, c_uart_16550, c_uart_16550A}; +static const char *uart_str[] = { + "unknown", "8250", "16450", "16550", "16550A" +}; + +static enum uart ser12_check_uart(unsigned int iobase) +{ + unsigned char b1,b2,b3; + enum uart u; + enum uart uart_tab[] = + { c_uart_16450, c_uart_unknown, c_uart_16550, c_uart_16550A }; + + b1 = inb(MCR(iobase)); + outb(b1 | 0x10, MCR(iobase)); /* loopback mode */ + b2 = inb(MSR(iobase)); + outb(0x1a, MCR(iobase)); + b3 = inb(MSR(iobase)) & 0xf0; + outb(b1, MCR(iobase)); /* restore old values */ + outb(b2, MSR(iobase)); + if (b3 != 0x90) + return c_uart_unknown; + inb(RBR(iobase)); + inb(RBR(iobase)); + outb(0x01, FCR(iobase)); /* enable FIFOs */ + u = uart_tab[(inb(IIR(iobase)) >> 6) & 3]; + if (u == c_uart_16450) { + outb(0x5a, SCR(iobase)); + b1 = inb(SCR(iobase)); + outb(0xa5, SCR(iobase)); + b2 = inb(SCR(iobase)); + if ((b1 != 0x5a) || (b2 != 0xa5)) + u = c_uart_8250; + } + return u; +} + +/* --------------------------------------------------------------------- */ + +static int ser12_open(struct net_device *dev) +{ + struct baycom_state *bc = netdev_priv(dev); + enum uart u; + + if (!dev || !bc) + return -ENXIO; + if (!dev->base_addr || dev->base_addr > 0x1000-SER12_EXTENT || + dev->irq < 2 || dev->irq > 15) + return -ENXIO; + if (!request_region(dev->base_addr, SER12_EXTENT, "baycom_ser12")) + return -EACCES; + memset(&bc->modem, 0, sizeof(bc->modem)); + bc->hdrv.par.bitrate = 1200; + if ((u = ser12_check_uart(dev->base_addr)) == c_uart_unknown) { + release_region(dev->base_addr, SER12_EXTENT); + return -EIO; + } + outb(0, FCR(dev->base_addr)); /* disable FIFOs */ + outb(0x0d, MCR(dev->base_addr)); + outb(0, IER(dev->base_addr)); + if (request_irq(dev->irq, ser12_interrupt, IRQF_SHARED, + "baycom_ser12", dev)) { + release_region(dev->base_addr, SER12_EXTENT); + return -EBUSY; + } + /* + * enable transmitter empty interrupt + */ + outb(2, IER(dev->base_addr)); + /* + * set the SIO to 6 Bits/character and 19200 or 28800 baud, so that + * we get exactly (hopefully) 2 or 3 interrupts per radio symbol, + * depending on the usage of the software DCD routine + */ + ser12_set_divisor(dev, bc->opt_dcd ? 6 : 4); + printk(KERN_INFO "%s: ser12 at iobase 0x%lx irq %u uart %s\n", + bc_drvname, dev->base_addr, dev->irq, uart_str[u]); + return 0; +} + +/* --------------------------------------------------------------------- */ + +static int ser12_close(struct net_device *dev) +{ + struct baycom_state *bc = netdev_priv(dev); + + if (!dev || !bc) + return -EINVAL; + /* + * disable interrupts + */ + outb(0, IER(dev->base_addr)); + outb(1, MCR(dev->base_addr)); + free_irq(dev->irq, dev); + release_region(dev->base_addr, SER12_EXTENT); + printk(KERN_INFO "%s: close ser12 at iobase 0x%lx irq %u\n", + bc_drvname, dev->base_addr, dev->irq); + return 0; +} + +/* --------------------------------------------------------------------- */ +/* + * ===================== hdlcdrv driver interface ========================= + */ + +/* --------------------------------------------------------------------- */ + +static int baycom_ioctl(struct net_device *dev, struct ifreq *ifr, + struct hdlcdrv_ioctl *hi, int cmd); + +/* --------------------------------------------------------------------- */ + +static const struct hdlcdrv_ops ser12_ops = { + .drvname = bc_drvname, + .drvinfo = bc_drvinfo, + .open = ser12_open, + .close = ser12_close, + .ioctl = baycom_ioctl, +}; + +/* --------------------------------------------------------------------- */ + +static int baycom_setmode(struct baycom_state *bc, const char *modestr) +{ + if (strchr(modestr, '*')) + bc->opt_dcd = 0; + else if (strchr(modestr, '+')) + bc->opt_dcd = -1; + else if (strchr(modestr, '@')) + bc->opt_dcd = -2; + else + bc->opt_dcd = 1; + return 0; +} + +/* --------------------------------------------------------------------- */ + +static int baycom_ioctl(struct net_device *dev, struct ifreq *ifr, + struct hdlcdrv_ioctl *hi, int cmd) +{ + struct baycom_state *bc; + struct baycom_ioctl bi; + + if (!dev) + return -EINVAL; + + bc = netdev_priv(dev); + BUG_ON(bc->hdrv.magic != HDLCDRV_MAGIC); + + if (cmd != SIOCDEVPRIVATE) + return -ENOIOCTLCMD; + switch (hi->cmd) { + default: + break; + + case HDLCDRVCTL_GETMODE: + strcpy(hi->data.modename, "ser12"); + if (bc->opt_dcd <= 0) + strcat(hi->data.modename, (!bc->opt_dcd) ? "*" : (bc->opt_dcd == -2) ? "@" : "+"); + if (copy_to_user(ifr->ifr_data, hi, sizeof(struct hdlcdrv_ioctl))) + return -EFAULT; + return 0; + + case HDLCDRVCTL_SETMODE: + if (netif_running(dev) || !capable(CAP_NET_ADMIN)) + return -EACCES; + hi->data.modename[sizeof(hi->data.modename)-1] = '\0'; + return baycom_setmode(bc, hi->data.modename); + + case HDLCDRVCTL_MODELIST: + strcpy(hi->data.modename, "ser12"); + if (copy_to_user(ifr->ifr_data, hi, sizeof(struct hdlcdrv_ioctl))) + return -EFAULT; + return 0; + + case HDLCDRVCTL_MODEMPARMASK: + return HDLCDRV_PARMASK_IOBASE | HDLCDRV_PARMASK_IRQ; + + } + + if (copy_from_user(&bi, ifr->ifr_data, sizeof(bi))) + return -EFAULT; + switch (bi.cmd) { + default: + return -ENOIOCTLCMD; + +#ifdef BAYCOM_DEBUG + case BAYCOMCTL_GETDEBUG: + bi.data.dbg.debug1 = bc->hdrv.ptt_keyed; + bi.data.dbg.debug2 = bc->debug_vals.last_intcnt; + bi.data.dbg.debug3 = bc->debug_vals.last_pllcorr; + break; +#endif /* BAYCOM_DEBUG */ + + } + if (copy_to_user(ifr->ifr_data, &bi, sizeof(bi))) + return -EFAULT; + return 0; + +} + +/* --------------------------------------------------------------------- */ + +/* + * command line settable parameters + */ +static char *mode[NR_PORTS] = { "ser12*", }; +static int iobase[NR_PORTS] = { 0x3f8, }; +static int irq[NR_PORTS] = { 4, }; + +module_param_array(mode, charp, NULL, 0); +MODULE_PARM_DESC(mode, "baycom operating mode; * for software DCD"); +module_param_hw_array(iobase, int, ioport, NULL, 0); +MODULE_PARM_DESC(iobase, "baycom io base address"); +module_param_hw_array(irq, int, irq, NULL, 0); +MODULE_PARM_DESC(irq, "baycom irq number"); + +MODULE_AUTHOR("Thomas M. Sailer, sailer@ife.ee.ethz.ch, hb9jnx@hb9w.che.eu"); +MODULE_DESCRIPTION("Baycom ser12 half duplex amateur radio modem driver"); +MODULE_LICENSE("GPL"); + +/* --------------------------------------------------------------------- */ + +static int __init init_baycomserhdx(void) +{ + int i, found = 0; + char set_hw = 1; + + printk(bc_drvinfo); + /* + * register net devices + */ + for (i = 0; i < NR_PORTS; i++) { + struct net_device *dev; + struct baycom_state *bc; + char ifname[IFNAMSIZ]; + + sprintf(ifname, "bcsh%d", i); + + if (!mode[i]) + set_hw = 0; + if (!set_hw) + iobase[i] = irq[i] = 0; + + dev = hdlcdrv_register(&ser12_ops, + sizeof(struct baycom_state), + ifname, iobase[i], irq[i], 0); + if (IS_ERR(dev)) + break; + + bc = netdev_priv(dev); + if (set_hw && baycom_setmode(bc, mode[i])) + set_hw = 0; + found++; + baycom_device[i] = dev; + } + + if (!found) + return -ENXIO; + return 0; +} + +static void __exit cleanup_baycomserhdx(void) +{ + int i; + + for(i = 0; i < NR_PORTS; i++) { + struct net_device *dev = baycom_device[i]; + + if (dev) + hdlcdrv_unregister(dev); + } +} + +module_init(init_baycomserhdx); +module_exit(cleanup_baycomserhdx); + +/* --------------------------------------------------------------------- */ + +#ifndef MODULE + +/* + * format: baycom_ser_hdx=io,irq,mode + * mode: ser12 hardware DCD + * ser12* software DCD + * ser12@ hardware/software DCD, i.e. no explicit DCD signal but hardware + * mutes audio input to the modem + * ser12+ hardware DCD, inverted signal at DCD pin + */ + +static int __init baycom_ser_hdx_setup(char *str) +{ + static unsigned nr_dev; + int ints[3]; + + if (nr_dev >= NR_PORTS) + return 0; + str = get_options(str, 3, ints); + if (ints[0] < 2) + return 0; + mode[nr_dev] = str; + iobase[nr_dev] = ints[1]; + irq[nr_dev] = ints[2]; + nr_dev++; + return 1; +} + +__setup("baycom_ser_hdx=", baycom_ser_hdx_setup); + +#endif /* MODULE */ +/* --------------------------------------------------------------------- */ diff --git a/drivers/net/hamradio/bpqether.c b/drivers/net/hamradio/bpqether.c new file mode 100644 index 000000000..777fa59f5 --- /dev/null +++ b/drivers/net/hamradio/bpqether.c @@ -0,0 +1,613 @@ +/* + * G8BPQ compatible "AX.25 via ethernet" driver release 004 + * + * This code REQUIRES 2.0.0 or higher/ NET3.029 + * + * This module: + * This module is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * This is a "pseudo" network driver to allow AX.25 over Ethernet + * using G8BPQ encapsulation. It has been extracted from the protocol + * implementation because + * + * - things got unreadable within the protocol stack + * - to cure the protocol stack from "feature-ism" + * - a protocol implementation shouldn't need to know on + * which hardware it is running + * - user-level programs like the AX.25 utilities shouldn't + * need to know about the hardware. + * - IP over ethernet encapsulated AX.25 was impossible + * - rxecho.c did not work + * - to have room for extensions + * - it just deserves to "live" as an own driver + * + * This driver can use any ethernet destination address, and can be + * limited to accept frames from one dedicated ethernet card only. + * + * Note that the driver sets up the BPQ devices automagically on + * startup or (if started before the "insmod" of an ethernet device) + * on "ifconfig up". It hopefully will remove the BPQ on "rmmod"ing + * the ethernet device (in fact: as soon as another ethernet or bpq + * device gets "ifconfig"ured). + * + * I have heard that several people are thinking of experiments + * with highspeed packet radio using existing ethernet cards. + * Well, this driver is prepared for this purpose, just add + * your tx key control and a txdelay / tailtime algorithm, + * probably some buffering, and /voila/... + * + * History + * BPQ 001 Joerg(DL1BKE) Extracted BPQ code from AX.25 + * protocol stack and added my own + * yet existing patches + * BPQ 002 Joerg(DL1BKE) Scan network device list on + * startup. + * BPQ 003 Joerg(DL1BKE) Ethernet destination address + * and accepted source address + * can be configured by an ioctl() + * call. + * Fixed to match Linux networking + * changes - 2.1.15. + * BPQ 004 Joerg(DL1BKE) Fixed to not lock up on ifconfig. + */ + +#include <linux/errno.h> +#include <linux/types.h> +#include <linux/socket.h> +#include <linux/in.h> +#include <linux/kernel.h> +#include <linux/string.h> +#include <linux/net.h> +#include <linux/slab.h> +#include <net/ax25.h> +#include <linux/inet.h> +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/if_arp.h> +#include <linux/skbuff.h> +#include <net/sock.h> +#include <linux/uaccess.h> +#include <linux/mm.h> +#include <linux/interrupt.h> +#include <linux/notifier.h> +#include <linux/proc_fs.h> +#include <linux/seq_file.h> +#include <linux/stat.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/rtnetlink.h> + +#include <net/ip.h> +#include <net/arp.h> +#include <net/net_namespace.h> + +#include <linux/bpqether.h> + +static const char banner[] __initconst = KERN_INFO \ + "AX.25: bpqether driver version 004\n"; + +static int bpq_rcv(struct sk_buff *, struct net_device *, struct packet_type *, struct net_device *); +static int bpq_device_event(struct notifier_block *, unsigned long, void *); + +static struct packet_type bpq_packet_type __read_mostly = { + .type = cpu_to_be16(ETH_P_BPQ), + .func = bpq_rcv, +}; + +static struct notifier_block bpq_dev_notifier = { + .notifier_call = bpq_device_event, +}; + + +struct bpqdev { + struct list_head bpq_list; /* list of bpq devices chain */ + struct net_device *ethdev; /* link to ethernet device */ + struct net_device *axdev; /* bpq device (bpq#) */ + char dest_addr[6]; /* ether destination address */ + char acpt_addr[6]; /* accept ether frames from this address only */ +}; + +static LIST_HEAD(bpq_devices); + +/* + * bpqether network devices are paired with ethernet devices below them, so + * form a special "super class" of normal ethernet devices; split their locks + * off into a separate class since they always nest. + */ +static struct lock_class_key bpq_netdev_xmit_lock_key; +static struct lock_class_key bpq_netdev_addr_lock_key; + +static void bpq_set_lockdep_class_one(struct net_device *dev, + struct netdev_queue *txq, + void *_unused) +{ + lockdep_set_class(&txq->_xmit_lock, &bpq_netdev_xmit_lock_key); +} + +static void bpq_set_lockdep_class(struct net_device *dev) +{ + lockdep_set_class(&dev->addr_list_lock, &bpq_netdev_addr_lock_key); + netdev_for_each_tx_queue(dev, bpq_set_lockdep_class_one, NULL); +} + +/* ------------------------------------------------------------------------ */ + + +/* + * Get the ethernet device for a BPQ device + */ +static inline struct net_device *bpq_get_ether_dev(struct net_device *dev) +{ + struct bpqdev *bpq = netdev_priv(dev); + + return bpq ? bpq->ethdev : NULL; +} + +/* + * Get the BPQ device for the ethernet device + */ +static inline struct net_device *bpq_get_ax25_dev(struct net_device *dev) +{ + struct bpqdev *bpq; + + list_for_each_entry_rcu(bpq, &bpq_devices, bpq_list) { + if (bpq->ethdev == dev) + return bpq->axdev; + } + return NULL; +} + +static inline int dev_is_ethdev(struct net_device *dev) +{ + return dev->type == ARPHRD_ETHER && strncmp(dev->name, "dummy", 5); +} + +/* ------------------------------------------------------------------------ */ + + +/* + * Receive an AX.25 frame via an ethernet interface. + */ +static int bpq_rcv(struct sk_buff *skb, struct net_device *dev, struct packet_type *ptype, struct net_device *orig_dev) +{ + int len; + char * ptr; + struct ethhdr *eth; + struct bpqdev *bpq; + + if (!net_eq(dev_net(dev), &init_net)) + goto drop; + + if ((skb = skb_share_check(skb, GFP_ATOMIC)) == NULL) + return NET_RX_DROP; + + if (!pskb_may_pull(skb, sizeof(struct ethhdr))) + goto drop; + + rcu_read_lock(); + dev = bpq_get_ax25_dev(dev); + + if (dev == NULL || !netif_running(dev)) + goto drop_unlock; + + /* + * if we want to accept frames from just one ethernet device + * we check the source address of the sender. + */ + + bpq = netdev_priv(dev); + + eth = eth_hdr(skb); + + if (!(bpq->acpt_addr[0] & 0x01) && + !ether_addr_equal(eth->h_source, bpq->acpt_addr)) + goto drop_unlock; + + if (skb_cow(skb, sizeof(struct ethhdr))) + goto drop_unlock; + + len = skb->data[0] + skb->data[1] * 256 - 5; + + skb_pull(skb, 2); /* Remove the length bytes */ + skb_trim(skb, len); /* Set the length of the data */ + + dev->stats.rx_packets++; + dev->stats.rx_bytes += len; + + ptr = skb_push(skb, 1); + *ptr = 0; + + skb->protocol = ax25_type_trans(skb, dev); + netif_rx(skb); +unlock: + + rcu_read_unlock(); + + return 0; +drop_unlock: + kfree_skb(skb); + goto unlock; + +drop: + kfree_skb(skb); + return 0; +} + +/* + * Send an AX.25 frame via an ethernet interface + */ +static netdev_tx_t bpq_xmit(struct sk_buff *skb, struct net_device *dev) +{ + unsigned char *ptr; + struct bpqdev *bpq; + struct net_device *orig_dev; + int size; + + if (skb->protocol == htons(ETH_P_IP)) + return ax25_ip_xmit(skb); + + /* + * Just to be *really* sure not to send anything if the interface + * is down, the ethernet device may have gone. + */ + if (!netif_running(dev)) { + kfree_skb(skb); + return NETDEV_TX_OK; + } + + skb_pull(skb, 1); /* Drop KISS byte */ + size = skb->len; + + /* + * We're about to mess with the skb which may still shared with the + * generic networking code so unshare and ensure it's got enough + * space for the BPQ headers. + */ + if (skb_cow(skb, AX25_BPQ_HEADER_LEN)) { + if (net_ratelimit()) + pr_err("bpqether: out of memory\n"); + kfree_skb(skb); + + return NETDEV_TX_OK; + } + + ptr = skb_push(skb, 2); /* Make space for length */ + + *ptr++ = (size + 5) % 256; + *ptr++ = (size + 5) / 256; + + bpq = netdev_priv(dev); + + orig_dev = dev; + if ((dev = bpq_get_ether_dev(dev)) == NULL) { + orig_dev->stats.tx_dropped++; + kfree_skb(skb); + return NETDEV_TX_OK; + } + + skb->protocol = ax25_type_trans(skb, dev); + skb_reset_network_header(skb); + dev_hard_header(skb, dev, ETH_P_BPQ, bpq->dest_addr, NULL, 0); + dev->stats.tx_packets++; + dev->stats.tx_bytes+=skb->len; + + dev_queue_xmit(skb); + netif_wake_queue(dev); + return NETDEV_TX_OK; +} + +/* + * Set AX.25 callsign + */ +static int bpq_set_mac_address(struct net_device *dev, void *addr) +{ + struct sockaddr *sa = (struct sockaddr *)addr; + + memcpy(dev->dev_addr, sa->sa_data, dev->addr_len); + + return 0; +} + +/* Ioctl commands + * + * SIOCSBPQETHOPT reserved for enhancements + * SIOCSBPQETHADDR set the destination and accepted + * source ethernet address (broadcast + * or multicast: accept all) + */ +static int bpq_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) +{ + struct bpq_ethaddr __user *ethaddr = ifr->ifr_data; + struct bpqdev *bpq = netdev_priv(dev); + struct bpq_req req; + + if (!capable(CAP_NET_ADMIN)) + return -EPERM; + + switch (cmd) { + case SIOCSBPQETHOPT: + if (copy_from_user(&req, ifr->ifr_data, sizeof(struct bpq_req))) + return -EFAULT; + switch (req.cmd) { + case SIOCGBPQETHPARAM: + case SIOCSBPQETHPARAM: + default: + return -EINVAL; + } + + break; + + case SIOCSBPQETHADDR: + if (copy_from_user(bpq->dest_addr, ethaddr->destination, ETH_ALEN)) + return -EFAULT; + if (copy_from_user(bpq->acpt_addr, ethaddr->accept, ETH_ALEN)) + return -EFAULT; + break; + + default: + return -EINVAL; + } + + return 0; +} + +/* + * open/close a device + */ +static int bpq_open(struct net_device *dev) +{ + netif_start_queue(dev); + return 0; +} + +static int bpq_close(struct net_device *dev) +{ + netif_stop_queue(dev); + return 0; +} + + +/* ------------------------------------------------------------------------ */ + + +/* + * Proc filesystem + */ +static void *bpq_seq_start(struct seq_file *seq, loff_t *pos) + __acquires(RCU) +{ + int i = 1; + struct bpqdev *bpqdev; + + rcu_read_lock(); + + if (*pos == 0) + return SEQ_START_TOKEN; + + list_for_each_entry_rcu(bpqdev, &bpq_devices, bpq_list) { + if (i == *pos) + return bpqdev; + } + return NULL; +} + +static void *bpq_seq_next(struct seq_file *seq, void *v, loff_t *pos) +{ + struct list_head *p; + struct bpqdev *bpqdev = v; + + ++*pos; + + if (v == SEQ_START_TOKEN) + p = rcu_dereference(list_next_rcu(&bpq_devices)); + else + p = rcu_dereference(list_next_rcu(&bpqdev->bpq_list)); + + return (p == &bpq_devices) ? NULL + : list_entry(p, struct bpqdev, bpq_list); +} + +static void bpq_seq_stop(struct seq_file *seq, void *v) + __releases(RCU) +{ + rcu_read_unlock(); +} + + +static int bpq_seq_show(struct seq_file *seq, void *v) +{ + if (v == SEQ_START_TOKEN) + seq_puts(seq, + "dev ether destination accept from\n"); + else { + const struct bpqdev *bpqdev = v; + + seq_printf(seq, "%-5s %-10s %pM ", + bpqdev->axdev->name, bpqdev->ethdev->name, + bpqdev->dest_addr); + + if (is_multicast_ether_addr(bpqdev->acpt_addr)) + seq_printf(seq, "*\n"); + else + seq_printf(seq, "%pM\n", bpqdev->acpt_addr); + + } + return 0; +} + +static const struct seq_operations bpq_seqops = { + .start = bpq_seq_start, + .next = bpq_seq_next, + .stop = bpq_seq_stop, + .show = bpq_seq_show, +}; + +/* ------------------------------------------------------------------------ */ + +static const struct net_device_ops bpq_netdev_ops = { + .ndo_open = bpq_open, + .ndo_stop = bpq_close, + .ndo_start_xmit = bpq_xmit, + .ndo_set_mac_address = bpq_set_mac_address, + .ndo_do_ioctl = bpq_ioctl, +}; + +static void bpq_setup(struct net_device *dev) +{ + dev->netdev_ops = &bpq_netdev_ops; + dev->needs_free_netdev = true; + + memcpy(dev->broadcast, &ax25_bcast, AX25_ADDR_LEN); + memcpy(dev->dev_addr, &ax25_defaddr, AX25_ADDR_LEN); + + dev->flags = 0; + dev->features = NETIF_F_LLTX; /* Allow recursion */ + +#if IS_ENABLED(CONFIG_AX25) + dev->header_ops = &ax25_header_ops; +#endif + + dev->type = ARPHRD_AX25; + dev->hard_header_len = AX25_MAX_HEADER_LEN + AX25_BPQ_HEADER_LEN; + dev->mtu = AX25_DEF_PACLEN; + dev->addr_len = AX25_ADDR_LEN; + +} + +/* + * Setup a new device. + */ +static int bpq_new_device(struct net_device *edev) +{ + int err; + struct net_device *ndev; + struct bpqdev *bpq; + + ndev = alloc_netdev(sizeof(struct bpqdev), "bpq%d", NET_NAME_UNKNOWN, + bpq_setup); + if (!ndev) + return -ENOMEM; + + + bpq = netdev_priv(ndev); + dev_hold(edev); + bpq->ethdev = edev; + bpq->axdev = ndev; + + eth_broadcast_addr(bpq->dest_addr); + eth_broadcast_addr(bpq->acpt_addr); + + err = register_netdevice(ndev); + if (err) + goto error; + bpq_set_lockdep_class(ndev); + + /* List protected by RTNL */ + list_add_rcu(&bpq->bpq_list, &bpq_devices); + return 0; + + error: + dev_put(edev); + free_netdev(ndev); + return err; + +} + +static void bpq_free_device(struct net_device *ndev) +{ + struct bpqdev *bpq = netdev_priv(ndev); + + dev_put(bpq->ethdev); + list_del_rcu(&bpq->bpq_list); + + unregister_netdevice(ndev); +} + +/* + * Handle device status changes. + */ +static int bpq_device_event(struct notifier_block *this, + unsigned long event, void *ptr) +{ + struct net_device *dev = netdev_notifier_info_to_dev(ptr); + + if (!net_eq(dev_net(dev), &init_net)) + return NOTIFY_DONE; + + if (!dev_is_ethdev(dev)) + return NOTIFY_DONE; + + switch (event) { + case NETDEV_UP: /* new ethernet device -> new BPQ interface */ + if (bpq_get_ax25_dev(dev) == NULL) + bpq_new_device(dev); + break; + + case NETDEV_DOWN: /* ethernet device closed -> close BPQ interface */ + if ((dev = bpq_get_ax25_dev(dev)) != NULL) + dev_close(dev); + break; + + case NETDEV_UNREGISTER: /* ethernet device removed -> free BPQ interface */ + if ((dev = bpq_get_ax25_dev(dev)) != NULL) + bpq_free_device(dev); + break; + default: + break; + } + + return NOTIFY_DONE; +} + + +/* ------------------------------------------------------------------------ */ + +/* + * Initialize driver. To be called from af_ax25 if not compiled as a + * module + */ +static int __init bpq_init_driver(void) +{ +#ifdef CONFIG_PROC_FS + if (!proc_create_seq("bpqether", 0444, init_net.proc_net, &bpq_seqops)) { + printk(KERN_ERR + "bpq: cannot create /proc/net/bpqether entry.\n"); + return -ENOENT; + } +#endif /* CONFIG_PROC_FS */ + + dev_add_pack(&bpq_packet_type); + + register_netdevice_notifier(&bpq_dev_notifier); + + printk(banner); + + return 0; +} + +static void __exit bpq_cleanup_driver(void) +{ + struct bpqdev *bpq; + + dev_remove_pack(&bpq_packet_type); + + unregister_netdevice_notifier(&bpq_dev_notifier); + + remove_proc_entry("bpqether", init_net.proc_net); + + rtnl_lock(); + while (!list_empty(&bpq_devices)) { + bpq = list_entry(bpq_devices.next, struct bpqdev, bpq_list); + bpq_free_device(bpq->axdev); + } + rtnl_unlock(); +} + +MODULE_AUTHOR("Joerg Reuter DL1BKE <jreuter@yaina.de>"); +MODULE_DESCRIPTION("Transmit and receive AX.25 packets over Ethernet"); +MODULE_LICENSE("GPL"); +module_init(bpq_init_driver); +module_exit(bpq_cleanup_driver); diff --git a/drivers/net/hamradio/dmascc.c b/drivers/net/hamradio/dmascc.c new file mode 100644 index 000000000..cde41200f --- /dev/null +++ b/drivers/net/hamradio/dmascc.c @@ -0,0 +1,1465 @@ +/* + * Driver for high-speed SCC boards (those with DMA support) + * Copyright (C) 1997-2000 Klaus Kudielka + * + * S5SCC/DMA support by Janko Koleznik S52HI + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + + +#include <linux/module.h> +#include <linux/bitops.h> +#include <linux/delay.h> +#include <linux/errno.h> +#include <linux/if_arp.h> +#include <linux/in.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/ioport.h> +#include <linux/kernel.h> +#include <linux/mm.h> +#include <linux/netdevice.h> +#include <linux/slab.h> +#include <linux/rtnetlink.h> +#include <linux/sockios.h> +#include <linux/workqueue.h> +#include <linux/atomic.h> +#include <asm/dma.h> +#include <asm/io.h> +#include <asm/irq.h> +#include <linux/uaccess.h> +#include <net/ax25.h> +#include "z8530.h" + + +/* Number of buffers per channel */ + +#define NUM_TX_BUF 2 /* NUM_TX_BUF >= 1 (min. 2 recommended) */ +#define NUM_RX_BUF 6 /* NUM_RX_BUF >= 1 (min. 2 recommended) */ +#define BUF_SIZE 1576 /* BUF_SIZE >= mtu + hard_header_len */ + + +/* Cards supported */ + +#define HW_PI { "Ottawa PI", 0x300, 0x20, 0x10, 8, \ + 0, 8, 1843200, 3686400 } +#define HW_PI2 { "Ottawa PI2", 0x300, 0x20, 0x10, 8, \ + 0, 8, 3686400, 7372800 } +#define HW_TWIN { "Gracilis PackeTwin", 0x200, 0x10, 0x10, 32, \ + 0, 4, 6144000, 6144000 } +#define HW_S5 { "S5SCC/DMA", 0x200, 0x10, 0x10, 32, \ + 0, 8, 4915200, 9830400 } + +#define HARDWARE { HW_PI, HW_PI2, HW_TWIN, HW_S5 } + +#define TMR_0_HZ 25600 /* Frequency of timer 0 */ + +#define TYPE_PI 0 +#define TYPE_PI2 1 +#define TYPE_TWIN 2 +#define TYPE_S5 3 +#define NUM_TYPES 4 + +#define MAX_NUM_DEVS 32 + + +/* SCC chips supported */ + +#define Z8530 0 +#define Z85C30 1 +#define Z85230 2 + +#define CHIPNAMES { "Z8530", "Z85C30", "Z85230" } + + +/* I/O registers */ + +/* 8530 registers relative to card base */ +#define SCCB_CMD 0x00 +#define SCCB_DATA 0x01 +#define SCCA_CMD 0x02 +#define SCCA_DATA 0x03 + +/* 8253/8254 registers relative to card base */ +#define TMR_CNT0 0x00 +#define TMR_CNT1 0x01 +#define TMR_CNT2 0x02 +#define TMR_CTRL 0x03 + +/* Additional PI/PI2 registers relative to card base */ +#define PI_DREQ_MASK 0x04 + +/* Additional PackeTwin registers relative to card base */ +#define TWIN_INT_REG 0x08 +#define TWIN_CLR_TMR1 0x09 +#define TWIN_CLR_TMR2 0x0a +#define TWIN_SPARE_1 0x0b +#define TWIN_DMA_CFG 0x08 +#define TWIN_SERIAL_CFG 0x09 +#define TWIN_DMA_CLR_FF 0x0a +#define TWIN_SPARE_2 0x0b + + +/* PackeTwin I/O register values */ + +/* INT_REG */ +#define TWIN_SCC_MSK 0x01 +#define TWIN_TMR1_MSK 0x02 +#define TWIN_TMR2_MSK 0x04 +#define TWIN_INT_MSK 0x07 + +/* SERIAL_CFG */ +#define TWIN_DTRA_ON 0x01 +#define TWIN_DTRB_ON 0x02 +#define TWIN_EXTCLKA 0x04 +#define TWIN_EXTCLKB 0x08 +#define TWIN_LOOPA_ON 0x10 +#define TWIN_LOOPB_ON 0x20 +#define TWIN_EI 0x80 + +/* DMA_CFG */ +#define TWIN_DMA_HDX_T1 0x08 +#define TWIN_DMA_HDX_R1 0x0a +#define TWIN_DMA_HDX_T3 0x14 +#define TWIN_DMA_HDX_R3 0x16 +#define TWIN_DMA_FDX_T3R1 0x1b +#define TWIN_DMA_FDX_T1R3 0x1d + + +/* Status values */ + +#define IDLE 0 +#define TX_HEAD 1 +#define TX_DATA 2 +#define TX_PAUSE 3 +#define TX_TAIL 4 +#define RTS_OFF 5 +#define WAIT 6 +#define DCD_ON 7 +#define RX_ON 8 +#define DCD_OFF 9 + + +/* Ioctls */ + +#define SIOCGSCCPARAM SIOCDEVPRIVATE +#define SIOCSSCCPARAM (SIOCDEVPRIVATE+1) + + +/* Data types */ + +struct scc_param { + int pclk_hz; /* frequency of BRG input (don't change) */ + int brg_tc; /* BRG terminal count; BRG disabled if < 0 */ + int nrzi; /* 0 (nrz), 1 (nrzi) */ + int clocks; /* see dmascc_cfg documentation */ + int txdelay; /* [1/TMR_0_HZ] */ + int txtimeout; /* [1/HZ] */ + int txtail; /* [1/TMR_0_HZ] */ + int waittime; /* [1/TMR_0_HZ] */ + int slottime; /* [1/TMR_0_HZ] */ + int persist; /* 1 ... 256 */ + int dma; /* -1 (disable), 0, 1, 3 */ + int txpause; /* [1/TMR_0_HZ] */ + int rtsoff; /* [1/TMR_0_HZ] */ + int dcdon; /* [1/TMR_0_HZ] */ + int dcdoff; /* [1/TMR_0_HZ] */ +}; + +struct scc_hardware { + char *name; + int io_region; + int io_delta; + int io_size; + int num_devs; + int scc_offset; + int tmr_offset; + int tmr_hz; + int pclk_hz; +}; + +struct scc_priv { + int type; + int chip; + struct net_device *dev; + struct scc_info *info; + + int channel; + int card_base, scc_cmd, scc_data; + int tmr_cnt, tmr_ctrl, tmr_mode; + struct scc_param param; + char rx_buf[NUM_RX_BUF][BUF_SIZE]; + int rx_len[NUM_RX_BUF]; + int rx_ptr; + struct work_struct rx_work; + int rx_head, rx_tail, rx_count; + int rx_over; + char tx_buf[NUM_TX_BUF][BUF_SIZE]; + int tx_len[NUM_TX_BUF]; + int tx_ptr; + int tx_head, tx_tail, tx_count; + int state; + unsigned long tx_start; + int rr0; + spinlock_t *register_lock; /* Per scc_info */ + spinlock_t ring_lock; +}; + +struct scc_info { + int irq_used; + int twin_serial_cfg; + struct net_device *dev[2]; + struct scc_priv priv[2]; + struct scc_info *next; + spinlock_t register_lock; /* Per device register lock */ +}; + + +/* Function declarations */ +static int setup_adapter(int card_base, int type, int n) __init; + +static void write_scc(struct scc_priv *priv, int reg, int val); +static void write_scc_data(struct scc_priv *priv, int val, int fast); +static int read_scc(struct scc_priv *priv, int reg); +static int read_scc_data(struct scc_priv *priv); + +static int scc_open(struct net_device *dev); +static int scc_close(struct net_device *dev); +static int scc_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd); +static int scc_send_packet(struct sk_buff *skb, struct net_device *dev); +static int scc_set_mac_address(struct net_device *dev, void *sa); + +static inline void tx_on(struct scc_priv *priv); +static inline void rx_on(struct scc_priv *priv); +static inline void rx_off(struct scc_priv *priv); +static void start_timer(struct scc_priv *priv, int t, int r15); +static inline unsigned char random(void); + +static inline void z8530_isr(struct scc_info *info); +static irqreturn_t scc_isr(int irq, void *dev_id); +static void rx_isr(struct scc_priv *priv); +static void special_condition(struct scc_priv *priv, int rc); +static void rx_bh(struct work_struct *); +static void tx_isr(struct scc_priv *priv); +static void es_isr(struct scc_priv *priv); +static void tm_isr(struct scc_priv *priv); + + +/* Initialization variables */ + +static int io[MAX_NUM_DEVS] __initdata = { 0, }; + +/* Beware! hw[] is also used in dmascc_exit(). */ +static struct scc_hardware hw[NUM_TYPES] = HARDWARE; + + +/* Global variables */ + +static struct scc_info *first; +static unsigned long rand; + + +MODULE_AUTHOR("Klaus Kudielka"); +MODULE_DESCRIPTION("Driver for high-speed SCC boards"); +module_param_hw_array(io, int, ioport, NULL, 0); +MODULE_LICENSE("GPL"); + +static void __exit dmascc_exit(void) +{ + int i; + struct scc_info *info; + + while (first) { + info = first; + + /* Unregister devices */ + for (i = 0; i < 2; i++) + unregister_netdev(info->dev[i]); + + /* Reset board */ + if (info->priv[0].type == TYPE_TWIN) + outb(0, info->dev[0]->base_addr + TWIN_SERIAL_CFG); + write_scc(&info->priv[0], R9, FHWRES); + release_region(info->dev[0]->base_addr, + hw[info->priv[0].type].io_size); + + for (i = 0; i < 2; i++) + free_netdev(info->dev[i]); + + /* Free memory */ + first = info->next; + kfree(info); + } +} + +static int __init dmascc_init(void) +{ + int h, i, j, n; + int base[MAX_NUM_DEVS], tcmd[MAX_NUM_DEVS], t0[MAX_NUM_DEVS], + t1[MAX_NUM_DEVS]; + unsigned t_val; + unsigned long time, start[MAX_NUM_DEVS], delay[MAX_NUM_DEVS], + counting[MAX_NUM_DEVS]; + + /* Initialize random number generator */ + rand = jiffies; + /* Cards found = 0 */ + n = 0; + /* Warning message */ + if (!io[0]) + printk(KERN_INFO "dmascc: autoprobing (dangerous)\n"); + + /* Run autodetection for each card type */ + for (h = 0; h < NUM_TYPES; h++) { + + if (io[0]) { + /* User-specified I/O address regions */ + for (i = 0; i < hw[h].num_devs; i++) + base[i] = 0; + for (i = 0; i < MAX_NUM_DEVS && io[i]; i++) { + j = (io[i] - + hw[h].io_region) / hw[h].io_delta; + if (j >= 0 && j < hw[h].num_devs && + hw[h].io_region + + j * hw[h].io_delta == io[i]) { + base[j] = io[i]; + } + } + } else { + /* Default I/O address regions */ + for (i = 0; i < hw[h].num_devs; i++) { + base[i] = + hw[h].io_region + i * hw[h].io_delta; + } + } + + /* Check valid I/O address regions */ + for (i = 0; i < hw[h].num_devs; i++) + if (base[i]) { + if (!request_region + (base[i], hw[h].io_size, "dmascc")) + base[i] = 0; + else { + tcmd[i] = + base[i] + hw[h].tmr_offset + + TMR_CTRL; + t0[i] = + base[i] + hw[h].tmr_offset + + TMR_CNT0; + t1[i] = + base[i] + hw[h].tmr_offset + + TMR_CNT1; + } + } + + /* Start timers */ + for (i = 0; i < hw[h].num_devs; i++) + if (base[i]) { + /* Timer 0: LSB+MSB, Mode 3, TMR_0_HZ */ + outb(0x36, tcmd[i]); + outb((hw[h].tmr_hz / TMR_0_HZ) & 0xFF, + t0[i]); + outb((hw[h].tmr_hz / TMR_0_HZ) >> 8, + t0[i]); + /* Timer 1: LSB+MSB, Mode 0, HZ/10 */ + outb(0x70, tcmd[i]); + outb((TMR_0_HZ / HZ * 10) & 0xFF, t1[i]); + outb((TMR_0_HZ / HZ * 10) >> 8, t1[i]); + start[i] = jiffies; + delay[i] = 0; + counting[i] = 1; + /* Timer 2: LSB+MSB, Mode 0 */ + outb(0xb0, tcmd[i]); + } + time = jiffies; + /* Wait until counter registers are loaded */ + udelay(2000000 / TMR_0_HZ); + + /* Timing loop */ + while (jiffies - time < 13) { + for (i = 0; i < hw[h].num_devs; i++) + if (base[i] && counting[i]) { + /* Read back Timer 1: latch; read LSB; read MSB */ + outb(0x40, tcmd[i]); + t_val = + inb(t1[i]) + (inb(t1[i]) << 8); + /* Also check whether counter did wrap */ + if (t_val == 0 || + t_val > TMR_0_HZ / HZ * 10) + counting[i] = 0; + delay[i] = jiffies - start[i]; + } + } + + /* Evaluate measurements */ + for (i = 0; i < hw[h].num_devs; i++) + if (base[i]) { + if ((delay[i] >= 9 && delay[i] <= 11) && + /* Ok, we have found an adapter */ + (setup_adapter(base[i], h, n) == 0)) + n++; + else + release_region(base[i], + hw[h].io_size); + } + + } /* NUM_TYPES */ + + /* If any adapter was successfully initialized, return ok */ + if (n) + return 0; + + /* If no adapter found, return error */ + printk(KERN_INFO "dmascc: no adapters found\n"); + return -EIO; +} + +module_init(dmascc_init); +module_exit(dmascc_exit); + +static void __init dev_setup(struct net_device *dev) +{ + dev->type = ARPHRD_AX25; + dev->hard_header_len = AX25_MAX_HEADER_LEN; + dev->mtu = 1500; + dev->addr_len = AX25_ADDR_LEN; + dev->tx_queue_len = 64; + memcpy(dev->broadcast, &ax25_bcast, AX25_ADDR_LEN); + memcpy(dev->dev_addr, &ax25_defaddr, AX25_ADDR_LEN); +} + +static const struct net_device_ops scc_netdev_ops = { + .ndo_open = scc_open, + .ndo_stop = scc_close, + .ndo_start_xmit = scc_send_packet, + .ndo_do_ioctl = scc_ioctl, + .ndo_set_mac_address = scc_set_mac_address, +}; + +static int __init setup_adapter(int card_base, int type, int n) +{ + int i, irq, chip, err; + struct scc_info *info; + struct net_device *dev; + struct scc_priv *priv; + unsigned long time; + unsigned int irqs; + int tmr_base = card_base + hw[type].tmr_offset; + int scc_base = card_base + hw[type].scc_offset; + char *chipnames[] = CHIPNAMES; + + /* Initialize what is necessary for write_scc and write_scc_data */ + info = kzalloc(sizeof(struct scc_info), GFP_KERNEL | GFP_DMA); + if (!info) { + err = -ENOMEM; + goto out; + } + + info->dev[0] = alloc_netdev(0, "", NET_NAME_UNKNOWN, dev_setup); + if (!info->dev[0]) { + printk(KERN_ERR "dmascc: " + "could not allocate memory for %s at %#3x\n", + hw[type].name, card_base); + err = -ENOMEM; + goto out1; + } + + info->dev[1] = alloc_netdev(0, "", NET_NAME_UNKNOWN, dev_setup); + if (!info->dev[1]) { + printk(KERN_ERR "dmascc: " + "could not allocate memory for %s at %#3x\n", + hw[type].name, card_base); + err = -ENOMEM; + goto out2; + } + spin_lock_init(&info->register_lock); + + priv = &info->priv[0]; + priv->type = type; + priv->card_base = card_base; + priv->scc_cmd = scc_base + SCCA_CMD; + priv->scc_data = scc_base + SCCA_DATA; + priv->register_lock = &info->register_lock; + + /* Reset SCC */ + write_scc(priv, R9, FHWRES | MIE | NV); + + /* Determine type of chip by enabling SDLC/HDLC enhancements */ + write_scc(priv, R15, SHDLCE); + if (!read_scc(priv, R15)) { + /* WR7' not present. This is an ordinary Z8530 SCC. */ + chip = Z8530; + } else { + /* Put one character in TX FIFO */ + write_scc_data(priv, 0, 0); + if (read_scc(priv, R0) & Tx_BUF_EMP) { + /* TX FIFO not full. This is a Z85230 ESCC with a 4-byte FIFO. */ + chip = Z85230; + } else { + /* TX FIFO full. This is a Z85C30 SCC with a 1-byte FIFO. */ + chip = Z85C30; + } + } + write_scc(priv, R15, 0); + + /* Start IRQ auto-detection */ + irqs = probe_irq_on(); + + /* Enable interrupts */ + if (type == TYPE_TWIN) { + outb(0, card_base + TWIN_DMA_CFG); + inb(card_base + TWIN_CLR_TMR1); + inb(card_base + TWIN_CLR_TMR2); + info->twin_serial_cfg = TWIN_EI; + outb(info->twin_serial_cfg, card_base + TWIN_SERIAL_CFG); + } else { + write_scc(priv, R15, CTSIE); + write_scc(priv, R0, RES_EXT_INT); + write_scc(priv, R1, EXT_INT_ENAB); + } + + /* Start timer */ + outb(1, tmr_base + TMR_CNT1); + outb(0, tmr_base + TMR_CNT1); + + /* Wait and detect IRQ */ + time = jiffies; + while (jiffies - time < 2 + HZ / TMR_0_HZ); + irq = probe_irq_off(irqs); + + /* Clear pending interrupt, disable interrupts */ + if (type == TYPE_TWIN) { + inb(card_base + TWIN_CLR_TMR1); + } else { + write_scc(priv, R1, 0); + write_scc(priv, R15, 0); + write_scc(priv, R0, RES_EXT_INT); + } + + if (irq <= 0) { + printk(KERN_ERR + "dmascc: could not find irq of %s at %#3x (irq=%d)\n", + hw[type].name, card_base, irq); + err = -ENODEV; + goto out3; + } + + /* Set up data structures */ + for (i = 0; i < 2; i++) { + dev = info->dev[i]; + priv = &info->priv[i]; + priv->type = type; + priv->chip = chip; + priv->dev = dev; + priv->info = info; + priv->channel = i; + spin_lock_init(&priv->ring_lock); + priv->register_lock = &info->register_lock; + priv->card_base = card_base; + priv->scc_cmd = scc_base + (i ? SCCB_CMD : SCCA_CMD); + priv->scc_data = scc_base + (i ? SCCB_DATA : SCCA_DATA); + priv->tmr_cnt = tmr_base + (i ? TMR_CNT2 : TMR_CNT1); + priv->tmr_ctrl = tmr_base + TMR_CTRL; + priv->tmr_mode = i ? 0xb0 : 0x70; + priv->param.pclk_hz = hw[type].pclk_hz; + priv->param.brg_tc = -1; + priv->param.clocks = TCTRxCP | RCRTxCP; + priv->param.persist = 256; + priv->param.dma = -1; + INIT_WORK(&priv->rx_work, rx_bh); + dev->ml_priv = priv; + snprintf(dev->name, sizeof(dev->name), "dmascc%i", 2 * n + i); + dev->base_addr = card_base; + dev->irq = irq; + dev->netdev_ops = &scc_netdev_ops; + dev->header_ops = &ax25_header_ops; + } + if (register_netdev(info->dev[0])) { + printk(KERN_ERR "dmascc: could not register %s\n", + info->dev[0]->name); + err = -ENODEV; + goto out3; + } + if (register_netdev(info->dev[1])) { + printk(KERN_ERR "dmascc: could not register %s\n", + info->dev[1]->name); + err = -ENODEV; + goto out4; + } + + + info->next = first; + first = info; + printk(KERN_INFO "dmascc: found %s (%s) at %#3x, irq %d\n", + hw[type].name, chipnames[chip], card_base, irq); + return 0; + + out4: + unregister_netdev(info->dev[0]); + out3: + if (info->priv[0].type == TYPE_TWIN) + outb(0, info->dev[0]->base_addr + TWIN_SERIAL_CFG); + write_scc(&info->priv[0], R9, FHWRES); + free_netdev(info->dev[1]); + out2: + free_netdev(info->dev[0]); + out1: + kfree(info); + out: + return err; +} + + +/* Driver functions */ + +static void write_scc(struct scc_priv *priv, int reg, int val) +{ + unsigned long flags; + switch (priv->type) { + case TYPE_S5: + if (reg) + outb(reg, priv->scc_cmd); + outb(val, priv->scc_cmd); + return; + case TYPE_TWIN: + if (reg) + outb_p(reg, priv->scc_cmd); + outb_p(val, priv->scc_cmd); + return; + default: + spin_lock_irqsave(priv->register_lock, flags); + outb_p(0, priv->card_base + PI_DREQ_MASK); + if (reg) + outb_p(reg, priv->scc_cmd); + outb_p(val, priv->scc_cmd); + outb(1, priv->card_base + PI_DREQ_MASK); + spin_unlock_irqrestore(priv->register_lock, flags); + return; + } +} + + +static void write_scc_data(struct scc_priv *priv, int val, int fast) +{ + unsigned long flags; + switch (priv->type) { + case TYPE_S5: + outb(val, priv->scc_data); + return; + case TYPE_TWIN: + outb_p(val, priv->scc_data); + return; + default: + if (fast) + outb_p(val, priv->scc_data); + else { + spin_lock_irqsave(priv->register_lock, flags); + outb_p(0, priv->card_base + PI_DREQ_MASK); + outb_p(val, priv->scc_data); + outb(1, priv->card_base + PI_DREQ_MASK); + spin_unlock_irqrestore(priv->register_lock, flags); + } + return; + } +} + + +static int read_scc(struct scc_priv *priv, int reg) +{ + int rc; + unsigned long flags; + switch (priv->type) { + case TYPE_S5: + if (reg) + outb(reg, priv->scc_cmd); + return inb(priv->scc_cmd); + case TYPE_TWIN: + if (reg) + outb_p(reg, priv->scc_cmd); + return inb_p(priv->scc_cmd); + default: + spin_lock_irqsave(priv->register_lock, flags); + outb_p(0, priv->card_base + PI_DREQ_MASK); + if (reg) + outb_p(reg, priv->scc_cmd); + rc = inb_p(priv->scc_cmd); + outb(1, priv->card_base + PI_DREQ_MASK); + spin_unlock_irqrestore(priv->register_lock, flags); + return rc; + } +} + + +static int read_scc_data(struct scc_priv *priv) +{ + int rc; + unsigned long flags; + switch (priv->type) { + case TYPE_S5: + return inb(priv->scc_data); + case TYPE_TWIN: + return inb_p(priv->scc_data); + default: + spin_lock_irqsave(priv->register_lock, flags); + outb_p(0, priv->card_base + PI_DREQ_MASK); + rc = inb_p(priv->scc_data); + outb(1, priv->card_base + PI_DREQ_MASK); + spin_unlock_irqrestore(priv->register_lock, flags); + return rc; + } +} + + +static int scc_open(struct net_device *dev) +{ + struct scc_priv *priv = dev->ml_priv; + struct scc_info *info = priv->info; + int card_base = priv->card_base; + + /* Request IRQ if not already used by other channel */ + if (!info->irq_used) { + if (request_irq(dev->irq, scc_isr, 0, "dmascc", info)) { + return -EAGAIN; + } + } + info->irq_used++; + + /* Request DMA if required */ + if (priv->param.dma >= 0) { + if (request_dma(priv->param.dma, "dmascc")) { + if (--info->irq_used == 0) + free_irq(dev->irq, info); + return -EAGAIN; + } else { + unsigned long flags = claim_dma_lock(); + clear_dma_ff(priv->param.dma); + release_dma_lock(flags); + } + } + + /* Initialize local variables */ + priv->rx_ptr = 0; + priv->rx_over = 0; + priv->rx_head = priv->rx_tail = priv->rx_count = 0; + priv->state = IDLE; + priv->tx_head = priv->tx_tail = priv->tx_count = 0; + priv->tx_ptr = 0; + + /* Reset channel */ + write_scc(priv, R9, (priv->channel ? CHRB : CHRA) | MIE | NV); + /* X1 clock, SDLC mode */ + write_scc(priv, R4, SDLC | X1CLK); + /* DMA */ + write_scc(priv, R1, EXT_INT_ENAB | WT_FN_RDYFN); + /* 8 bit RX char, RX disable */ + write_scc(priv, R3, Rx8); + /* 8 bit TX char, TX disable */ + write_scc(priv, R5, Tx8); + /* SDLC address field */ + write_scc(priv, R6, 0); + /* SDLC flag */ + write_scc(priv, R7, FLAG); + switch (priv->chip) { + case Z85C30: + /* Select WR7' */ + write_scc(priv, R15, SHDLCE); + /* Auto EOM reset */ + write_scc(priv, R7, AUTOEOM); + write_scc(priv, R15, 0); + break; + case Z85230: + /* Select WR7' */ + write_scc(priv, R15, SHDLCE); + /* The following bits are set (see 2.5.2.1): + - Automatic EOM reset + - Interrupt request if RX FIFO is half full + This bit should be ignored in DMA mode (according to the + documentation), but actually isn't. The receiver doesn't work if + it is set. Thus, we have to clear it in DMA mode. + - Interrupt/DMA request if TX FIFO is completely empty + a) If set, the ESCC behaves as if it had no TX FIFO (Z85C30 + compatibility). + b) If cleared, DMA requests may follow each other very quickly, + filling up the TX FIFO. + Advantage: TX works even in case of high bus latency. + Disadvantage: Edge-triggered DMA request circuitry may miss + a request. No more data is delivered, resulting + in a TX FIFO underrun. + Both PI2 and S5SCC/DMA seem to work fine with TXFIFOE cleared. + The PackeTwin doesn't. I don't know about the PI, but let's + assume it behaves like the PI2. + */ + if (priv->param.dma >= 0) { + if (priv->type == TYPE_TWIN) + write_scc(priv, R7, AUTOEOM | TXFIFOE); + else + write_scc(priv, R7, AUTOEOM); + } else { + write_scc(priv, R7, AUTOEOM | RXFIFOH); + } + write_scc(priv, R15, 0); + break; + } + /* Preset CRC, NRZ(I) encoding */ + write_scc(priv, R10, CRCPS | (priv->param.nrzi ? NRZI : NRZ)); + + /* Configure baud rate generator */ + if (priv->param.brg_tc >= 0) { + /* Program BR generator */ + write_scc(priv, R12, priv->param.brg_tc & 0xFF); + write_scc(priv, R13, (priv->param.brg_tc >> 8) & 0xFF); + /* BRG source = SYS CLK; enable BRG; DTR REQ function (required by + PackeTwin, not connected on the PI2); set DPLL source to BRG */ + write_scc(priv, R14, SSBR | DTRREQ | BRSRC | BRENABL); + /* Enable DPLL */ + write_scc(priv, R14, SEARCH | DTRREQ | BRSRC | BRENABL); + } else { + /* Disable BR generator */ + write_scc(priv, R14, DTRREQ | BRSRC); + } + + /* Configure clocks */ + if (priv->type == TYPE_TWIN) { + /* Disable external TX clock receiver */ + outb((info->twin_serial_cfg &= + ~(priv->channel ? TWIN_EXTCLKB : TWIN_EXTCLKA)), + card_base + TWIN_SERIAL_CFG); + } + write_scc(priv, R11, priv->param.clocks); + if ((priv->type == TYPE_TWIN) && !(priv->param.clocks & TRxCOI)) { + /* Enable external TX clock receiver */ + outb((info->twin_serial_cfg |= + (priv->channel ? TWIN_EXTCLKB : TWIN_EXTCLKA)), + card_base + TWIN_SERIAL_CFG); + } + + /* Configure PackeTwin */ + if (priv->type == TYPE_TWIN) { + /* Assert DTR, enable interrupts */ + outb((info->twin_serial_cfg |= TWIN_EI | + (priv->channel ? TWIN_DTRB_ON : TWIN_DTRA_ON)), + card_base + TWIN_SERIAL_CFG); + } + + /* Read current status */ + priv->rr0 = read_scc(priv, R0); + /* Enable DCD interrupt */ + write_scc(priv, R15, DCDIE); + + netif_start_queue(dev); + + return 0; +} + + +static int scc_close(struct net_device *dev) +{ + struct scc_priv *priv = dev->ml_priv; + struct scc_info *info = priv->info; + int card_base = priv->card_base; + + netif_stop_queue(dev); + + if (priv->type == TYPE_TWIN) { + /* Drop DTR */ + outb((info->twin_serial_cfg &= + (priv->channel ? ~TWIN_DTRB_ON : ~TWIN_DTRA_ON)), + card_base + TWIN_SERIAL_CFG); + } + + /* Reset channel, free DMA and IRQ */ + write_scc(priv, R9, (priv->channel ? CHRB : CHRA) | MIE | NV); + if (priv->param.dma >= 0) { + if (priv->type == TYPE_TWIN) + outb(0, card_base + TWIN_DMA_CFG); + free_dma(priv->param.dma); + } + if (--info->irq_used == 0) + free_irq(dev->irq, info); + + return 0; +} + + +static int scc_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) +{ + struct scc_priv *priv = dev->ml_priv; + + switch (cmd) { + case SIOCGSCCPARAM: + if (copy_to_user + (ifr->ifr_data, &priv->param, + sizeof(struct scc_param))) + return -EFAULT; + return 0; + case SIOCSSCCPARAM: + if (!capable(CAP_NET_ADMIN)) + return -EPERM; + if (netif_running(dev)) + return -EAGAIN; + if (copy_from_user + (&priv->param, ifr->ifr_data, + sizeof(struct scc_param))) + return -EFAULT; + return 0; + default: + return -EINVAL; + } +} + + +static int scc_send_packet(struct sk_buff *skb, struct net_device *dev) +{ + struct scc_priv *priv = dev->ml_priv; + unsigned long flags; + int i; + + if (skb->protocol == htons(ETH_P_IP)) + return ax25_ip_xmit(skb); + + /* Temporarily stop the scheduler feeding us packets */ + netif_stop_queue(dev); + + /* Transfer data to DMA buffer */ + i = priv->tx_head; + skb_copy_from_linear_data_offset(skb, 1, priv->tx_buf[i], skb->len - 1); + priv->tx_len[i] = skb->len - 1; + + /* Clear interrupts while we touch our circular buffers */ + + spin_lock_irqsave(&priv->ring_lock, flags); + /* Move the ring buffer's head */ + priv->tx_head = (i + 1) % NUM_TX_BUF; + priv->tx_count++; + + /* If we just filled up the last buffer, leave queue stopped. + The higher layers must wait until we have a DMA buffer + to accept the data. */ + if (priv->tx_count < NUM_TX_BUF) + netif_wake_queue(dev); + + /* Set new TX state */ + if (priv->state == IDLE) { + /* Assert RTS, start timer */ + priv->state = TX_HEAD; + priv->tx_start = jiffies; + write_scc(priv, R5, TxCRC_ENAB | RTS | TxENAB | Tx8); + write_scc(priv, R15, 0); + start_timer(priv, priv->param.txdelay, 0); + } + + /* Turn interrupts back on and free buffer */ + spin_unlock_irqrestore(&priv->ring_lock, flags); + dev_kfree_skb(skb); + + return NETDEV_TX_OK; +} + + +static int scc_set_mac_address(struct net_device *dev, void *sa) +{ + memcpy(dev->dev_addr, ((struct sockaddr *) sa)->sa_data, + dev->addr_len); + return 0; +} + + +static inline void tx_on(struct scc_priv *priv) +{ + int i, n; + unsigned long flags; + + if (priv->param.dma >= 0) { + n = (priv->chip == Z85230) ? 3 : 1; + /* Program DMA controller */ + flags = claim_dma_lock(); + set_dma_mode(priv->param.dma, DMA_MODE_WRITE); + set_dma_addr(priv->param.dma, + (int) priv->tx_buf[priv->tx_tail] + n); + set_dma_count(priv->param.dma, + priv->tx_len[priv->tx_tail] - n); + release_dma_lock(flags); + /* Enable TX underrun interrupt */ + write_scc(priv, R15, TxUIE); + /* Configure DREQ */ + if (priv->type == TYPE_TWIN) + outb((priv->param.dma == + 1) ? TWIN_DMA_HDX_T1 : TWIN_DMA_HDX_T3, + priv->card_base + TWIN_DMA_CFG); + else + write_scc(priv, R1, + EXT_INT_ENAB | WT_FN_RDYFN | + WT_RDY_ENAB); + /* Write first byte(s) */ + spin_lock_irqsave(priv->register_lock, flags); + for (i = 0; i < n; i++) + write_scc_data(priv, + priv->tx_buf[priv->tx_tail][i], 1); + enable_dma(priv->param.dma); + spin_unlock_irqrestore(priv->register_lock, flags); + } else { + write_scc(priv, R15, TxUIE); + write_scc(priv, R1, + EXT_INT_ENAB | WT_FN_RDYFN | TxINT_ENAB); + tx_isr(priv); + } + /* Reset EOM latch if we do not have the AUTOEOM feature */ + if (priv->chip == Z8530) + write_scc(priv, R0, RES_EOM_L); +} + + +static inline void rx_on(struct scc_priv *priv) +{ + unsigned long flags; + + /* Clear RX FIFO */ + while (read_scc(priv, R0) & Rx_CH_AV) + read_scc_data(priv); + priv->rx_over = 0; + if (priv->param.dma >= 0) { + /* Program DMA controller */ + flags = claim_dma_lock(); + set_dma_mode(priv->param.dma, DMA_MODE_READ); + set_dma_addr(priv->param.dma, + (int) priv->rx_buf[priv->rx_head]); + set_dma_count(priv->param.dma, BUF_SIZE); + release_dma_lock(flags); + enable_dma(priv->param.dma); + /* Configure PackeTwin DMA */ + if (priv->type == TYPE_TWIN) { + outb((priv->param.dma == + 1) ? TWIN_DMA_HDX_R1 : TWIN_DMA_HDX_R3, + priv->card_base + TWIN_DMA_CFG); + } + /* Sp. cond. intr. only, ext int enable, RX DMA enable */ + write_scc(priv, R1, EXT_INT_ENAB | INT_ERR_Rx | + WT_RDY_RT | WT_FN_RDYFN | WT_RDY_ENAB); + } else { + /* Reset current frame */ + priv->rx_ptr = 0; + /* Intr. on all Rx characters and Sp. cond., ext int enable */ + write_scc(priv, R1, EXT_INT_ENAB | INT_ALL_Rx | WT_RDY_RT | + WT_FN_RDYFN); + } + write_scc(priv, R0, ERR_RES); + write_scc(priv, R3, RxENABLE | Rx8 | RxCRC_ENAB); +} + + +static inline void rx_off(struct scc_priv *priv) +{ + /* Disable receiver */ + write_scc(priv, R3, Rx8); + /* Disable DREQ / RX interrupt */ + if (priv->param.dma >= 0 && priv->type == TYPE_TWIN) + outb(0, priv->card_base + TWIN_DMA_CFG); + else + write_scc(priv, R1, EXT_INT_ENAB | WT_FN_RDYFN); + /* Disable DMA */ + if (priv->param.dma >= 0) + disable_dma(priv->param.dma); +} + + +static void start_timer(struct scc_priv *priv, int t, int r15) +{ + outb(priv->tmr_mode, priv->tmr_ctrl); + if (t == 0) { + tm_isr(priv); + } else if (t > 0) { + outb(t & 0xFF, priv->tmr_cnt); + outb((t >> 8) & 0xFF, priv->tmr_cnt); + if (priv->type != TYPE_TWIN) { + write_scc(priv, R15, r15 | CTSIE); + priv->rr0 |= CTS; + } + } +} + + +static inline unsigned char random(void) +{ + /* See "Numerical Recipes in C", second edition, p. 284 */ + rand = rand * 1664525L + 1013904223L; + return (unsigned char) (rand >> 24); +} + +static inline void z8530_isr(struct scc_info *info) +{ + int is, i = 100; + + while ((is = read_scc(&info->priv[0], R3)) && i--) { + if (is & CHARxIP) { + rx_isr(&info->priv[0]); + } else if (is & CHATxIP) { + tx_isr(&info->priv[0]); + } else if (is & CHAEXT) { + es_isr(&info->priv[0]); + } else if (is & CHBRxIP) { + rx_isr(&info->priv[1]); + } else if (is & CHBTxIP) { + tx_isr(&info->priv[1]); + } else { + es_isr(&info->priv[1]); + } + write_scc(&info->priv[0], R0, RES_H_IUS); + i++; + } + if (i < 0) { + printk(KERN_ERR "dmascc: stuck in ISR with RR3=0x%02x.\n", + is); + } + /* Ok, no interrupts pending from this 8530. The INT line should + be inactive now. */ +} + + +static irqreturn_t scc_isr(int irq, void *dev_id) +{ + struct scc_info *info = dev_id; + + spin_lock(info->priv[0].register_lock); + /* At this point interrupts are enabled, and the interrupt under service + is already acknowledged, but masked off. + + Interrupt processing: We loop until we know that the IRQ line is + low. If another positive edge occurs afterwards during the ISR, + another interrupt will be triggered by the interrupt controller + as soon as the IRQ level is enabled again (see asm/irq.h). + + Bottom-half handlers will be processed after scc_isr(). This is + important, since we only have small ringbuffers and want new data + to be fetched/delivered immediately. */ + + if (info->priv[0].type == TYPE_TWIN) { + int is, card_base = info->priv[0].card_base; + while ((is = ~inb(card_base + TWIN_INT_REG)) & + TWIN_INT_MSK) { + if (is & TWIN_SCC_MSK) { + z8530_isr(info); + } else if (is & TWIN_TMR1_MSK) { + inb(card_base + TWIN_CLR_TMR1); + tm_isr(&info->priv[0]); + } else { + inb(card_base + TWIN_CLR_TMR2); + tm_isr(&info->priv[1]); + } + } + } else + z8530_isr(info); + spin_unlock(info->priv[0].register_lock); + return IRQ_HANDLED; +} + + +static void rx_isr(struct scc_priv *priv) +{ + if (priv->param.dma >= 0) { + /* Check special condition and perform error reset. See 2.4.7.5. */ + special_condition(priv, read_scc(priv, R1)); + write_scc(priv, R0, ERR_RES); + } else { + /* Check special condition for each character. Error reset not necessary. + Same algorithm for SCC and ESCC. See 2.4.7.1 and 2.4.7.4. */ + int rc; + while (read_scc(priv, R0) & Rx_CH_AV) { + rc = read_scc(priv, R1); + if (priv->rx_ptr < BUF_SIZE) + priv->rx_buf[priv->rx_head][priv-> + rx_ptr++] = + read_scc_data(priv); + else { + priv->rx_over = 2; + read_scc_data(priv); + } + special_condition(priv, rc); + } + } +} + + +static void special_condition(struct scc_priv *priv, int rc) +{ + int cb; + unsigned long flags; + + /* See Figure 2-15. Only overrun and EOF need to be checked. */ + + if (rc & Rx_OVR) { + /* Receiver overrun */ + priv->rx_over = 1; + if (priv->param.dma < 0) + write_scc(priv, R0, ERR_RES); + } else if (rc & END_FR) { + /* End of frame. Get byte count */ + if (priv->param.dma >= 0) { + flags = claim_dma_lock(); + cb = BUF_SIZE - get_dma_residue(priv->param.dma) - + 2; + release_dma_lock(flags); + } else { + cb = priv->rx_ptr - 2; + } + if (priv->rx_over) { + /* We had an overrun */ + priv->dev->stats.rx_errors++; + if (priv->rx_over == 2) + priv->dev->stats.rx_length_errors++; + else + priv->dev->stats.rx_fifo_errors++; + priv->rx_over = 0; + } else if (rc & CRC_ERR) { + /* Count invalid CRC only if packet length >= minimum */ + if (cb >= 15) { + priv->dev->stats.rx_errors++; + priv->dev->stats.rx_crc_errors++; + } + } else { + if (cb >= 15) { + if (priv->rx_count < NUM_RX_BUF - 1) { + /* Put good frame in FIFO */ + priv->rx_len[priv->rx_head] = cb; + priv->rx_head = + (priv->rx_head + + 1) % NUM_RX_BUF; + priv->rx_count++; + schedule_work(&priv->rx_work); + } else { + priv->dev->stats.rx_errors++; + priv->dev->stats.rx_over_errors++; + } + } + } + /* Get ready for new frame */ + if (priv->param.dma >= 0) { + flags = claim_dma_lock(); + set_dma_addr(priv->param.dma, + (int) priv->rx_buf[priv->rx_head]); + set_dma_count(priv->param.dma, BUF_SIZE); + release_dma_lock(flags); + } else { + priv->rx_ptr = 0; + } + } +} + + +static void rx_bh(struct work_struct *ugli_api) +{ + struct scc_priv *priv = container_of(ugli_api, struct scc_priv, rx_work); + int i = priv->rx_tail; + int cb; + unsigned long flags; + struct sk_buff *skb; + unsigned char *data; + + spin_lock_irqsave(&priv->ring_lock, flags); + while (priv->rx_count) { + spin_unlock_irqrestore(&priv->ring_lock, flags); + cb = priv->rx_len[i]; + /* Allocate buffer */ + skb = dev_alloc_skb(cb + 1); + if (skb == NULL) { + /* Drop packet */ + priv->dev->stats.rx_dropped++; + } else { + /* Fill buffer */ + data = skb_put(skb, cb + 1); + data[0] = 0; + memcpy(&data[1], priv->rx_buf[i], cb); + skb->protocol = ax25_type_trans(skb, priv->dev); + netif_rx(skb); + priv->dev->stats.rx_packets++; + priv->dev->stats.rx_bytes += cb; + } + spin_lock_irqsave(&priv->ring_lock, flags); + /* Move tail */ + priv->rx_tail = i = (i + 1) % NUM_RX_BUF; + priv->rx_count--; + } + spin_unlock_irqrestore(&priv->ring_lock, flags); +} + + +static void tx_isr(struct scc_priv *priv) +{ + int i = priv->tx_tail, p = priv->tx_ptr; + + /* Suspend TX interrupts if we don't want to send anything. + See Figure 2-22. */ + if (p == priv->tx_len[i]) { + write_scc(priv, R0, RES_Tx_P); + return; + } + + /* Write characters */ + while ((read_scc(priv, R0) & Tx_BUF_EMP) && p < priv->tx_len[i]) { + write_scc_data(priv, priv->tx_buf[i][p++], 0); + } + + /* Reset EOM latch of Z8530 */ + if (!priv->tx_ptr && p && priv->chip == Z8530) + write_scc(priv, R0, RES_EOM_L); + + priv->tx_ptr = p; +} + + +static void es_isr(struct scc_priv *priv) +{ + int i, rr0, drr0, res; + unsigned long flags; + + /* Read status, reset interrupt bit (open latches) */ + rr0 = read_scc(priv, R0); + write_scc(priv, R0, RES_EXT_INT); + drr0 = priv->rr0 ^ rr0; + priv->rr0 = rr0; + + /* Transmit underrun (2.4.9.6). We can't check the TxEOM flag, since + it might have already been cleared again by AUTOEOM. */ + if (priv->state == TX_DATA) { + /* Get remaining bytes */ + i = priv->tx_tail; + if (priv->param.dma >= 0) { + disable_dma(priv->param.dma); + flags = claim_dma_lock(); + res = get_dma_residue(priv->param.dma); + release_dma_lock(flags); + } else { + res = priv->tx_len[i] - priv->tx_ptr; + priv->tx_ptr = 0; + } + /* Disable DREQ / TX interrupt */ + if (priv->param.dma >= 0 && priv->type == TYPE_TWIN) + outb(0, priv->card_base + TWIN_DMA_CFG); + else + write_scc(priv, R1, EXT_INT_ENAB | WT_FN_RDYFN); + if (res) { + /* Update packet statistics */ + priv->dev->stats.tx_errors++; + priv->dev->stats.tx_fifo_errors++; + /* Other underrun interrupts may already be waiting */ + write_scc(priv, R0, RES_EXT_INT); + write_scc(priv, R0, RES_EXT_INT); + } else { + /* Update packet statistics */ + priv->dev->stats.tx_packets++; + priv->dev->stats.tx_bytes += priv->tx_len[i]; + /* Remove frame from FIFO */ + priv->tx_tail = (i + 1) % NUM_TX_BUF; + priv->tx_count--; + /* Inform upper layers */ + netif_wake_queue(priv->dev); + } + /* Switch state */ + write_scc(priv, R15, 0); + if (priv->tx_count && + (jiffies - priv->tx_start) < priv->param.txtimeout) { + priv->state = TX_PAUSE; + start_timer(priv, priv->param.txpause, 0); + } else { + priv->state = TX_TAIL; + start_timer(priv, priv->param.txtail, 0); + } + } + + /* DCD transition */ + if (drr0 & DCD) { + if (rr0 & DCD) { + switch (priv->state) { + case IDLE: + case WAIT: + priv->state = DCD_ON; + write_scc(priv, R15, 0); + start_timer(priv, priv->param.dcdon, 0); + } + } else { + switch (priv->state) { + case RX_ON: + rx_off(priv); + priv->state = DCD_OFF; + write_scc(priv, R15, 0); + start_timer(priv, priv->param.dcdoff, 0); + } + } + } + + /* CTS transition */ + if ((drr0 & CTS) && (~rr0 & CTS) && priv->type != TYPE_TWIN) + tm_isr(priv); + +} + + +static void tm_isr(struct scc_priv *priv) +{ + switch (priv->state) { + case TX_HEAD: + case TX_PAUSE: + tx_on(priv); + priv->state = TX_DATA; + break; + case TX_TAIL: + write_scc(priv, R5, TxCRC_ENAB | Tx8); + priv->state = RTS_OFF; + if (priv->type != TYPE_TWIN) + write_scc(priv, R15, 0); + start_timer(priv, priv->param.rtsoff, 0); + break; + case RTS_OFF: + write_scc(priv, R15, DCDIE); + priv->rr0 = read_scc(priv, R0); + if (priv->rr0 & DCD) { + priv->dev->stats.collisions++; + rx_on(priv); + priv->state = RX_ON; + } else { + priv->state = WAIT; + start_timer(priv, priv->param.waittime, DCDIE); + } + break; + case WAIT: + if (priv->tx_count) { + priv->state = TX_HEAD; + priv->tx_start = jiffies; + write_scc(priv, R5, + TxCRC_ENAB | RTS | TxENAB | Tx8); + write_scc(priv, R15, 0); + start_timer(priv, priv->param.txdelay, 0); + } else { + priv->state = IDLE; + if (priv->type != TYPE_TWIN) + write_scc(priv, R15, DCDIE); + } + break; + case DCD_ON: + case DCD_OFF: + write_scc(priv, R15, DCDIE); + priv->rr0 = read_scc(priv, R0); + if (priv->rr0 & DCD) { + rx_on(priv); + priv->state = RX_ON; + } else { + priv->state = WAIT; + start_timer(priv, + random() / priv->param.persist * + priv->param.slottime, DCDIE); + } + break; + } +} diff --git a/drivers/net/hamradio/hdlcdrv.c b/drivers/net/hamradio/hdlcdrv.c new file mode 100644 index 000000000..97e3bc60c --- /dev/null +++ b/drivers/net/hamradio/hdlcdrv.c @@ -0,0 +1,780 @@ +/*****************************************************************************/ + +/* + * hdlcdrv.c -- HDLC packet radio network driver. + * + * Copyright (C) 1996-2000 Thomas Sailer (sailer@ife.ee.ethz.ch) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + * Please note that the GPL allows you to use the driver, NOT the radio. + * In order to use the radio, you need a license from the communications + * authority of your country. + * + * The driver was derived from Donald Beckers skeleton.c + * Written 1993-94 by Donald Becker. + * + * History: + * 0.1 21.09.1996 Started + * 18.10.1996 Changed to new user space access routines + * (copy_{to,from}_user) + * 0.2 21.11.1996 various small changes + * 0.3 03.03.1997 fixed (hopefully) IP not working with ax.25 as a module + * 0.4 16.04.1997 init code/data tagged + * 0.5 30.07.1997 made HDLC buffers bigger (solves a problem with the + * soundmodem driver) + * 0.6 05.04.1998 add spinlocks + * 0.7 03.08.1999 removed some old compatibility cruft + * 0.8 12.02.2000 adapted to softnet driver interface + */ + +/*****************************************************************************/ + +#include <linux/capability.h> +#include <linux/module.h> +#include <linux/types.h> +#include <linux/net.h> +#include <linux/in.h> +#include <linux/if.h> +#include <linux/errno.h> +#include <linux/init.h> +#include <linux/bitops.h> + +#include <linux/netdevice.h> +#include <linux/if_arp.h> +#include <linux/skbuff.h> +#include <linux/hdlcdrv.h> +#include <linux/random.h> +#include <net/ax25.h> +#include <linux/uaccess.h> + +#include <linux/crc-ccitt.h> + +/* --------------------------------------------------------------------- */ + +#define KISS_VERBOSE + +/* --------------------------------------------------------------------- */ + +#define PARAM_TXDELAY 1 +#define PARAM_PERSIST 2 +#define PARAM_SLOTTIME 3 +#define PARAM_TXTAIL 4 +#define PARAM_FULLDUP 5 +#define PARAM_HARDWARE 6 +#define PARAM_RETURN 255 + +/* --------------------------------------------------------------------- */ +/* + * the CRC routines are stolen from WAMPES + * by Dieter Deyke + */ + + +/*---------------------------------------------------------------------------*/ + +static inline void append_crc_ccitt(unsigned char *buffer, int len) +{ + unsigned int crc = crc_ccitt(0xffff, buffer, len) ^ 0xffff; + buffer += len; + *buffer++ = crc; + *buffer++ = crc >> 8; +} + +/*---------------------------------------------------------------------------*/ + +static inline int check_crc_ccitt(const unsigned char *buf, int cnt) +{ + return (crc_ccitt(0xffff, buf, cnt) & 0xffff) == 0xf0b8; +} + +/*---------------------------------------------------------------------------*/ + +#if 0 +static int calc_crc_ccitt(const unsigned char *buf, int cnt) +{ + unsigned int crc = 0xffff; + + for (; cnt > 0; cnt--) + crc = (crc >> 8) ^ crc_ccitt_table[(crc ^ *buf++) & 0xff]; + crc ^= 0xffff; + return crc & 0xffff; +} +#endif + +/* ---------------------------------------------------------------------- */ + +#define tenms_to_2flags(s,tenms) ((tenms * s->par.bitrate) / 100 / 16) + +/* ---------------------------------------------------------------------- */ +/* + * The HDLC routines + */ + +static int hdlc_rx_add_bytes(struct hdlcdrv_state *s, unsigned int bits, + int num) +{ + int added = 0; + + while (s->hdlcrx.rx_state && num >= 8) { + if (s->hdlcrx.len >= sizeof(s->hdlcrx.buffer)) { + s->hdlcrx.rx_state = 0; + return 0; + } + *s->hdlcrx.bp++ = bits >> (32-num); + s->hdlcrx.len++; + num -= 8; + added += 8; + } + return added; +} + +static void hdlc_rx_flag(struct net_device *dev, struct hdlcdrv_state *s) +{ + struct sk_buff *skb; + int pkt_len; + unsigned char *cp; + + if (s->hdlcrx.len < 4) + return; + if (!check_crc_ccitt(s->hdlcrx.buffer, s->hdlcrx.len)) + return; + pkt_len = s->hdlcrx.len - 2 + 1; /* KISS kludge */ + if (!(skb = dev_alloc_skb(pkt_len))) { + printk("%s: memory squeeze, dropping packet\n", dev->name); + dev->stats.rx_dropped++; + return; + } + cp = skb_put(skb, pkt_len); + *cp++ = 0; /* KISS kludge */ + memcpy(cp, s->hdlcrx.buffer, pkt_len - 1); + skb->protocol = ax25_type_trans(skb, dev); + netif_rx(skb); + dev->stats.rx_packets++; +} + +void hdlcdrv_receiver(struct net_device *dev, struct hdlcdrv_state *s) +{ + int i; + unsigned int mask1, mask2, mask3, mask4, mask5, mask6, word; + + if (!s || s->magic != HDLCDRV_MAGIC) + return; + if (test_and_set_bit(0, &s->hdlcrx.in_hdlc_rx)) + return; + + while (!hdlcdrv_hbuf_empty(&s->hdlcrx.hbuf)) { + word = hdlcdrv_hbuf_get(&s->hdlcrx.hbuf); + +#ifdef HDLCDRV_DEBUG + hdlcdrv_add_bitbuffer_word(&s->bitbuf_hdlc, word); +#endif /* HDLCDRV_DEBUG */ + s->hdlcrx.bitstream >>= 16; + s->hdlcrx.bitstream |= word << 16; + s->hdlcrx.bitbuf >>= 16; + s->hdlcrx.bitbuf |= word << 16; + s->hdlcrx.numbits += 16; + for(i = 15, mask1 = 0x1fc00, mask2 = 0x1fe00, mask3 = 0x0fc00, + mask4 = 0x1f800, mask5 = 0xf800, mask6 = 0xffff; + i >= 0; + i--, mask1 <<= 1, mask2 <<= 1, mask3 <<= 1, mask4 <<= 1, + mask5 <<= 1, mask6 = (mask6 << 1) | 1) { + if ((s->hdlcrx.bitstream & mask1) == mask1) + s->hdlcrx.rx_state = 0; /* abort received */ + else if ((s->hdlcrx.bitstream & mask2) == mask3) { + /* flag received */ + if (s->hdlcrx.rx_state) { + hdlc_rx_add_bytes(s, s->hdlcrx.bitbuf + << (8+i), + s->hdlcrx.numbits + -8-i); + hdlc_rx_flag(dev, s); + } + s->hdlcrx.len = 0; + s->hdlcrx.bp = s->hdlcrx.buffer; + s->hdlcrx.rx_state = 1; + s->hdlcrx.numbits = i; + } else if ((s->hdlcrx.bitstream & mask4) == mask5) { + /* stuffed bit */ + s->hdlcrx.numbits--; + s->hdlcrx.bitbuf = (s->hdlcrx.bitbuf & (~mask6)) | + ((s->hdlcrx.bitbuf & mask6) << 1); + } + } + s->hdlcrx.numbits -= hdlc_rx_add_bytes(s, s->hdlcrx.bitbuf, + s->hdlcrx.numbits); + } + clear_bit(0, &s->hdlcrx.in_hdlc_rx); +} + +/* ---------------------------------------------------------------------- */ + +static inline void do_kiss_params(struct hdlcdrv_state *s, + unsigned char *data, unsigned long len) +{ + +#ifdef KISS_VERBOSE +#define PKP(a,b) printk(KERN_INFO "hdlcdrv.c: channel params: " a "\n", b) +#else /* KISS_VERBOSE */ +#define PKP(a,b) +#endif /* KISS_VERBOSE */ + + if (len < 2) + return; + switch(data[0]) { + case PARAM_TXDELAY: + s->ch_params.tx_delay = data[1]; + PKP("TX delay = %ums", 10 * s->ch_params.tx_delay); + break; + case PARAM_PERSIST: + s->ch_params.ppersist = data[1]; + PKP("p persistence = %u", s->ch_params.ppersist); + break; + case PARAM_SLOTTIME: + s->ch_params.slottime = data[1]; + PKP("slot time = %ums", s->ch_params.slottime); + break; + case PARAM_TXTAIL: + s->ch_params.tx_tail = data[1]; + PKP("TX tail = %ums", s->ch_params.tx_tail); + break; + case PARAM_FULLDUP: + s->ch_params.fulldup = !!data[1]; + PKP("%s duplex", s->ch_params.fulldup ? "full" : "half"); + break; + default: + break; + } +#undef PKP +} + +/* ---------------------------------------------------------------------- */ + +void hdlcdrv_transmitter(struct net_device *dev, struct hdlcdrv_state *s) +{ + unsigned int mask1, mask2, mask3; + int i; + struct sk_buff *skb; + int pkt_len; + + if (!s || s->magic != HDLCDRV_MAGIC) + return; + if (test_and_set_bit(0, &s->hdlctx.in_hdlc_tx)) + return; + for (;;) { + if (s->hdlctx.numbits >= 16) { + if (hdlcdrv_hbuf_full(&s->hdlctx.hbuf)) { + clear_bit(0, &s->hdlctx.in_hdlc_tx); + return; + } + hdlcdrv_hbuf_put(&s->hdlctx.hbuf, s->hdlctx.bitbuf); + s->hdlctx.bitbuf >>= 16; + s->hdlctx.numbits -= 16; + } + switch (s->hdlctx.tx_state) { + default: + clear_bit(0, &s->hdlctx.in_hdlc_tx); + return; + case 0: + case 1: + if (s->hdlctx.numflags) { + s->hdlctx.numflags--; + s->hdlctx.bitbuf |= + 0x7e7e << s->hdlctx.numbits; + s->hdlctx.numbits += 16; + break; + } + if (s->hdlctx.tx_state == 1) { + clear_bit(0, &s->hdlctx.in_hdlc_tx); + return; + } + if (!(skb = s->skb)) { + int flgs = tenms_to_2flags(s, s->ch_params.tx_tail); + if (flgs < 2) + flgs = 2; + s->hdlctx.tx_state = 1; + s->hdlctx.numflags = flgs; + break; + } + s->skb = NULL; + netif_wake_queue(dev); + pkt_len = skb->len-1; /* strip KISS byte */ + if (pkt_len >= HDLCDRV_MAXFLEN || pkt_len < 2) { + s->hdlctx.tx_state = 0; + s->hdlctx.numflags = 1; + dev_kfree_skb_irq(skb); + break; + } + skb_copy_from_linear_data_offset(skb, 1, + s->hdlctx.buffer, + pkt_len); + dev_kfree_skb_irq(skb); + s->hdlctx.bp = s->hdlctx.buffer; + append_crc_ccitt(s->hdlctx.buffer, pkt_len); + s->hdlctx.len = pkt_len+2; /* the appended CRC */ + s->hdlctx.tx_state = 2; + s->hdlctx.bitstream = 0; + dev->stats.tx_packets++; + break; + case 2: + if (!s->hdlctx.len) { + s->hdlctx.tx_state = 0; + s->hdlctx.numflags = 1; + break; + } + s->hdlctx.len--; + s->hdlctx.bitbuf |= *s->hdlctx.bp << + s->hdlctx.numbits; + s->hdlctx.bitstream >>= 8; + s->hdlctx.bitstream |= (*s->hdlctx.bp++) << 16; + mask1 = 0x1f000; + mask2 = 0x10000; + mask3 = 0xffffffff >> (31-s->hdlctx.numbits); + s->hdlctx.numbits += 8; + for(i = 0; i < 8; i++, mask1 <<= 1, mask2 <<= 1, + mask3 = (mask3 << 1) | 1) { + if ((s->hdlctx.bitstream & mask1) != mask1) + continue; + s->hdlctx.bitstream &= ~mask2; + s->hdlctx.bitbuf = + (s->hdlctx.bitbuf & mask3) | + ((s->hdlctx.bitbuf & + (~mask3)) << 1); + s->hdlctx.numbits++; + mask3 = (mask3 << 1) | 1; + } + break; + } + } +} + +/* ---------------------------------------------------------------------- */ + +static void start_tx(struct net_device *dev, struct hdlcdrv_state *s) +{ + s->hdlctx.tx_state = 0; + s->hdlctx.numflags = tenms_to_2flags(s, s->ch_params.tx_delay); + s->hdlctx.bitbuf = s->hdlctx.bitstream = s->hdlctx.numbits = 0; + hdlcdrv_transmitter(dev, s); + s->hdlctx.ptt = 1; + s->ptt_keyed++; +} + +/* ---------------------------------------------------------------------- */ + +void hdlcdrv_arbitrate(struct net_device *dev, struct hdlcdrv_state *s) +{ + if (!s || s->magic != HDLCDRV_MAGIC || s->hdlctx.ptt || !s->skb) + return; + if (s->ch_params.fulldup) { + start_tx(dev, s); + return; + } + if (s->hdlcrx.dcd) { + s->hdlctx.slotcnt = s->ch_params.slottime; + return; + } + if ((--s->hdlctx.slotcnt) > 0) + return; + s->hdlctx.slotcnt = s->ch_params.slottime; + if ((prandom_u32() % 256) > s->ch_params.ppersist) + return; + start_tx(dev, s); +} + +/* --------------------------------------------------------------------- */ +/* + * ===================== network driver interface ========================= + */ + +static netdev_tx_t hdlcdrv_send_packet(struct sk_buff *skb, + struct net_device *dev) +{ + struct hdlcdrv_state *sm = netdev_priv(dev); + + if (skb->protocol == htons(ETH_P_IP)) + return ax25_ip_xmit(skb); + + if (skb->data[0] != 0) { + do_kiss_params(sm, skb->data, skb->len); + dev_kfree_skb(skb); + return NETDEV_TX_OK; + } + if (sm->skb) { + dev_kfree_skb(skb); + return NETDEV_TX_OK; + } + netif_stop_queue(dev); + sm->skb = skb; + return NETDEV_TX_OK; +} + +/* --------------------------------------------------------------------- */ + +static int hdlcdrv_set_mac_address(struct net_device *dev, void *addr) +{ + struct sockaddr *sa = (struct sockaddr *)addr; + + /* addr is an AX.25 shifted ASCII mac address */ + memcpy(dev->dev_addr, sa->sa_data, dev->addr_len); + return 0; +} + +/* --------------------------------------------------------------------- */ +/* + * Open/initialize the board. This is called (in the current kernel) + * sometime after booting when the 'ifconfig' program is run. + * + * This routine should set everything up anew at each open, even + * registers that "should" only need to be set once at boot, so that + * there is non-reboot way to recover if something goes wrong. + */ + +static int hdlcdrv_open(struct net_device *dev) +{ + struct hdlcdrv_state *s = netdev_priv(dev); + int i; + + if (!s->ops || !s->ops->open) + return -ENODEV; + + /* + * initialise some variables + */ + s->opened = 1; + s->hdlcrx.hbuf.rd = s->hdlcrx.hbuf.wr = 0; + s->hdlcrx.in_hdlc_rx = 0; + s->hdlcrx.rx_state = 0; + + s->hdlctx.hbuf.rd = s->hdlctx.hbuf.wr = 0; + s->hdlctx.in_hdlc_tx = 0; + s->hdlctx.tx_state = 1; + s->hdlctx.numflags = 0; + s->hdlctx.bitstream = s->hdlctx.bitbuf = s->hdlctx.numbits = 0; + s->hdlctx.ptt = 0; + s->hdlctx.slotcnt = s->ch_params.slottime; + s->hdlctx.calibrate = 0; + + i = s->ops->open(dev); + if (i) + return i; + netif_start_queue(dev); + return 0; +} + +/* --------------------------------------------------------------------- */ +/* + * The inverse routine to hdlcdrv_open(). + */ + +static int hdlcdrv_close(struct net_device *dev) +{ + struct hdlcdrv_state *s = netdev_priv(dev); + int i = 0; + + netif_stop_queue(dev); + + if (s->ops && s->ops->close) + i = s->ops->close(dev); + if (s->skb) + dev_kfree_skb(s->skb); + s->skb = NULL; + s->opened = 0; + return i; +} + +/* --------------------------------------------------------------------- */ + +static int hdlcdrv_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) +{ + struct hdlcdrv_state *s = netdev_priv(dev); + struct hdlcdrv_ioctl bi; + + if (cmd != SIOCDEVPRIVATE) { + if (s->ops && s->ops->ioctl) + return s->ops->ioctl(dev, ifr, &bi, cmd); + return -ENOIOCTLCMD; + } + if (copy_from_user(&bi, ifr->ifr_data, sizeof(bi))) + return -EFAULT; + + switch (bi.cmd) { + default: + if (s->ops && s->ops->ioctl) + return s->ops->ioctl(dev, ifr, &bi, cmd); + return -ENOIOCTLCMD; + + case HDLCDRVCTL_GETCHANNELPAR: + bi.data.cp.tx_delay = s->ch_params.tx_delay; + bi.data.cp.tx_tail = s->ch_params.tx_tail; + bi.data.cp.slottime = s->ch_params.slottime; + bi.data.cp.ppersist = s->ch_params.ppersist; + bi.data.cp.fulldup = s->ch_params.fulldup; + break; + + case HDLCDRVCTL_SETCHANNELPAR: + if (!capable(CAP_NET_ADMIN)) + return -EACCES; + s->ch_params.tx_delay = bi.data.cp.tx_delay; + s->ch_params.tx_tail = bi.data.cp.tx_tail; + s->ch_params.slottime = bi.data.cp.slottime; + s->ch_params.ppersist = bi.data.cp.ppersist; + s->ch_params.fulldup = bi.data.cp.fulldup; + s->hdlctx.slotcnt = 1; + return 0; + + case HDLCDRVCTL_GETMODEMPAR: + bi.data.mp.iobase = dev->base_addr; + bi.data.mp.irq = dev->irq; + bi.data.mp.dma = dev->dma; + bi.data.mp.dma2 = s->ptt_out.dma2; + bi.data.mp.seriobase = s->ptt_out.seriobase; + bi.data.mp.pariobase = s->ptt_out.pariobase; + bi.data.mp.midiiobase = s->ptt_out.midiiobase; + break; + + case HDLCDRVCTL_SETMODEMPAR: + if ((!capable(CAP_SYS_RAWIO)) || netif_running(dev)) + return -EACCES; + dev->base_addr = bi.data.mp.iobase; + dev->irq = bi.data.mp.irq; + dev->dma = bi.data.mp.dma; + s->ptt_out.dma2 = bi.data.mp.dma2; + s->ptt_out.seriobase = bi.data.mp.seriobase; + s->ptt_out.pariobase = bi.data.mp.pariobase; + s->ptt_out.midiiobase = bi.data.mp.midiiobase; + return 0; + + case HDLCDRVCTL_GETSTAT: + bi.data.cs.ptt = hdlcdrv_ptt(s); + bi.data.cs.dcd = s->hdlcrx.dcd; + bi.data.cs.ptt_keyed = s->ptt_keyed; + bi.data.cs.tx_packets = dev->stats.tx_packets; + bi.data.cs.tx_errors = dev->stats.tx_errors; + bi.data.cs.rx_packets = dev->stats.rx_packets; + bi.data.cs.rx_errors = dev->stats.rx_errors; + break; + + case HDLCDRVCTL_OLDGETSTAT: + bi.data.ocs.ptt = hdlcdrv_ptt(s); + bi.data.ocs.dcd = s->hdlcrx.dcd; + bi.data.ocs.ptt_keyed = s->ptt_keyed; + break; + + case HDLCDRVCTL_CALIBRATE: + if(!capable(CAP_SYS_RAWIO)) + return -EPERM; + if (s->par.bitrate <= 0) + return -EINVAL; + if (bi.data.calibrate > INT_MAX / s->par.bitrate) + return -EINVAL; + s->hdlctx.calibrate = bi.data.calibrate * s->par.bitrate / 16; + return 0; + + case HDLCDRVCTL_GETSAMPLES: +#ifndef HDLCDRV_DEBUG + return -EPERM; +#else /* HDLCDRV_DEBUG */ + if (s->bitbuf_channel.rd == s->bitbuf_channel.wr) + return -EAGAIN; + bi.data.bits = + s->bitbuf_channel.buffer[s->bitbuf_channel.rd]; + s->bitbuf_channel.rd = (s->bitbuf_channel.rd+1) % + sizeof(s->bitbuf_channel.buffer); + break; +#endif /* HDLCDRV_DEBUG */ + + case HDLCDRVCTL_GETBITS: +#ifndef HDLCDRV_DEBUG + return -EPERM; +#else /* HDLCDRV_DEBUG */ + if (s->bitbuf_hdlc.rd == s->bitbuf_hdlc.wr) + return -EAGAIN; + bi.data.bits = + s->bitbuf_hdlc.buffer[s->bitbuf_hdlc.rd]; + s->bitbuf_hdlc.rd = (s->bitbuf_hdlc.rd+1) % + sizeof(s->bitbuf_hdlc.buffer); + break; +#endif /* HDLCDRV_DEBUG */ + + case HDLCDRVCTL_DRIVERNAME: + if (s->ops && s->ops->drvname) { + strncpy(bi.data.drivername, s->ops->drvname, + sizeof(bi.data.drivername)); + break; + } + bi.data.drivername[0] = '\0'; + break; + + } + if (copy_to_user(ifr->ifr_data, &bi, sizeof(bi))) + return -EFAULT; + return 0; + +} + +/* --------------------------------------------------------------------- */ + +static const struct net_device_ops hdlcdrv_netdev = { + .ndo_open = hdlcdrv_open, + .ndo_stop = hdlcdrv_close, + .ndo_start_xmit = hdlcdrv_send_packet, + .ndo_do_ioctl = hdlcdrv_ioctl, + .ndo_set_mac_address = hdlcdrv_set_mac_address, +}; + +/* + * Initialize fields in hdlcdrv + */ +static void hdlcdrv_setup(struct net_device *dev) +{ + static const struct hdlcdrv_channel_params dflt_ch_params = { + 20, 2, 10, 40, 0 + }; + struct hdlcdrv_state *s = netdev_priv(dev); + + /* + * initialize the hdlcdrv_state struct + */ + s->ch_params = dflt_ch_params; + s->ptt_keyed = 0; + + spin_lock_init(&s->hdlcrx.hbuf.lock); + s->hdlcrx.hbuf.rd = s->hdlcrx.hbuf.wr = 0; + s->hdlcrx.in_hdlc_rx = 0; + s->hdlcrx.rx_state = 0; + + spin_lock_init(&s->hdlctx.hbuf.lock); + s->hdlctx.hbuf.rd = s->hdlctx.hbuf.wr = 0; + s->hdlctx.in_hdlc_tx = 0; + s->hdlctx.tx_state = 1; + s->hdlctx.numflags = 0; + s->hdlctx.bitstream = s->hdlctx.bitbuf = s->hdlctx.numbits = 0; + s->hdlctx.ptt = 0; + s->hdlctx.slotcnt = s->ch_params.slottime; + s->hdlctx.calibrate = 0; + +#ifdef HDLCDRV_DEBUG + s->bitbuf_channel.rd = s->bitbuf_channel.wr = 0; + s->bitbuf_channel.shreg = 0x80; + + s->bitbuf_hdlc.rd = s->bitbuf_hdlc.wr = 0; + s->bitbuf_hdlc.shreg = 0x80; +#endif /* HDLCDRV_DEBUG */ + + + /* Fill in the fields of the device structure */ + + s->skb = NULL; + + dev->netdev_ops = &hdlcdrv_netdev; + dev->header_ops = &ax25_header_ops; + + dev->type = ARPHRD_AX25; /* AF_AX25 device */ + dev->hard_header_len = AX25_MAX_HEADER_LEN + AX25_BPQ_HEADER_LEN; + dev->mtu = AX25_DEF_PACLEN; /* eth_mtu is the default */ + dev->addr_len = AX25_ADDR_LEN; /* sizeof an ax.25 address */ + memcpy(dev->broadcast, &ax25_bcast, AX25_ADDR_LEN); + memcpy(dev->dev_addr, &ax25_defaddr, AX25_ADDR_LEN); + dev->tx_queue_len = 16; +} + +/* --------------------------------------------------------------------- */ +struct net_device *hdlcdrv_register(const struct hdlcdrv_ops *ops, + unsigned int privsize, const char *ifname, + unsigned int baseaddr, unsigned int irq, + unsigned int dma) +{ + struct net_device *dev; + struct hdlcdrv_state *s; + int err; + + BUG_ON(ops == NULL); + + if (privsize < sizeof(struct hdlcdrv_state)) + privsize = sizeof(struct hdlcdrv_state); + + dev = alloc_netdev(privsize, ifname, NET_NAME_UNKNOWN, hdlcdrv_setup); + if (!dev) + return ERR_PTR(-ENOMEM); + + /* + * initialize part of the hdlcdrv_state struct + */ + s = netdev_priv(dev); + s->magic = HDLCDRV_MAGIC; + s->ops = ops; + dev->base_addr = baseaddr; + dev->irq = irq; + dev->dma = dma; + + err = register_netdev(dev); + if (err < 0) { + printk(KERN_WARNING "hdlcdrv: cannot register net " + "device %s\n", dev->name); + free_netdev(dev); + dev = ERR_PTR(err); + } + return dev; +} + +/* --------------------------------------------------------------------- */ + +void hdlcdrv_unregister(struct net_device *dev) +{ + struct hdlcdrv_state *s = netdev_priv(dev); + + BUG_ON(s->magic != HDLCDRV_MAGIC); + + if (s->opened && s->ops->close) + s->ops->close(dev); + unregister_netdev(dev); + + free_netdev(dev); +} + +/* --------------------------------------------------------------------- */ + +EXPORT_SYMBOL(hdlcdrv_receiver); +EXPORT_SYMBOL(hdlcdrv_transmitter); +EXPORT_SYMBOL(hdlcdrv_arbitrate); +EXPORT_SYMBOL(hdlcdrv_register); +EXPORT_SYMBOL(hdlcdrv_unregister); + +/* --------------------------------------------------------------------- */ + +static int __init hdlcdrv_init_driver(void) +{ + printk(KERN_INFO "hdlcdrv: (C) 1996-2000 Thomas Sailer HB9JNX/AE4WA\n"); + printk(KERN_INFO "hdlcdrv: version 0.8\n"); + return 0; +} + +/* --------------------------------------------------------------------- */ + +static void __exit hdlcdrv_cleanup_driver(void) +{ + printk(KERN_INFO "hdlcdrv: cleanup\n"); +} + +/* --------------------------------------------------------------------- */ + +MODULE_AUTHOR("Thomas M. Sailer, sailer@ife.ee.ethz.ch, hb9jnx@hb9w.che.eu"); +MODULE_DESCRIPTION("Packet Radio network interface HDLC encoder/decoder"); +MODULE_LICENSE("GPL"); +module_init(hdlcdrv_init_driver); +module_exit(hdlcdrv_cleanup_driver); + +/* --------------------------------------------------------------------- */ diff --git a/drivers/net/hamradio/mkiss.c b/drivers/net/hamradio/mkiss.c new file mode 100644 index 000000000..29a83fb76 --- /dev/null +++ b/drivers/net/hamradio/mkiss.c @@ -0,0 +1,1017 @@ +/* + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, see <http://www.gnu.org/licenses/>. + * + * Copyright (C) Hans Alblas PE1AYX <hans@esrac.ele.tue.nl> + * Copyright (C) 2004, 05 Ralf Baechle DL5RB <ralf@linux-mips.org> + * Copyright (C) 2004, 05 Thomas Osterried DL9SAU <thomas@x-berg.in-berlin.de> + */ +#include <linux/module.h> +#include <linux/bitops.h> +#include <linux/uaccess.h> +#include <linux/crc16.h> +#include <linux/string.h> +#include <linux/mm.h> +#include <linux/interrupt.h> +#include <linux/in.h> +#include <linux/inet.h> +#include <linux/slab.h> +#include <linux/tty.h> +#include <linux/errno.h> +#include <linux/netdevice.h> +#include <linux/major.h> +#include <linux/init.h> +#include <linux/rtnetlink.h> +#include <linux/etherdevice.h> +#include <linux/skbuff.h> +#include <linux/if_arp.h> +#include <linux/jiffies.h> +#include <linux/compat.h> + +#include <net/ax25.h> + +#define AX_MTU 236 + +/* some arch define END as assembly function ending, just undef it */ +#undef END +/* SLIP/KISS protocol characters. */ +#define END 0300 /* indicates end of frame */ +#define ESC 0333 /* indicates byte stuffing */ +#define ESC_END 0334 /* ESC ESC_END means END 'data' */ +#define ESC_ESC 0335 /* ESC ESC_ESC means ESC 'data' */ + +struct mkiss { + struct tty_struct *tty; /* ptr to TTY structure */ + struct net_device *dev; /* easy for intr handling */ + + /* These are pointers to the malloc()ed frame buffers. */ + spinlock_t buflock;/* lock for rbuf and xbuf */ + unsigned char *rbuff; /* receiver buffer */ + int rcount; /* received chars counter */ + unsigned char *xbuff; /* transmitter buffer */ + unsigned char *xhead; /* pointer to next byte to XMIT */ + int xleft; /* bytes left in XMIT queue */ + + /* Detailed SLIP statistics. */ + int mtu; /* Our mtu (to spot changes!) */ + int buffsize; /* Max buffers sizes */ + + unsigned long flags; /* Flag values/ mode etc */ + /* long req'd: used by set_bit --RR */ +#define AXF_INUSE 0 /* Channel in use */ +#define AXF_ESCAPE 1 /* ESC received */ +#define AXF_ERROR 2 /* Parity, etc. error */ +#define AXF_KEEPTEST 3 /* Keepalive test flag */ +#define AXF_OUTWAIT 4 /* is outpacket was flag */ + + int mode; + int crcmode; /* MW: for FlexNet, SMACK etc. */ + int crcauto; /* CRC auto mode */ + +#define CRC_MODE_NONE 0 +#define CRC_MODE_FLEX 1 +#define CRC_MODE_SMACK 2 +#define CRC_MODE_FLEX_TEST 3 +#define CRC_MODE_SMACK_TEST 4 + + atomic_t refcnt; + struct semaphore dead_sem; +}; + +/*---------------------------------------------------------------------------*/ + +static const unsigned short crc_flex_table[] = { + 0x0f87, 0x1e0e, 0x2c95, 0x3d1c, 0x49a3, 0x582a, 0x6ab1, 0x7b38, + 0x83cf, 0x9246, 0xa0dd, 0xb154, 0xc5eb, 0xd462, 0xe6f9, 0xf770, + 0x1f06, 0x0e8f, 0x3c14, 0x2d9d, 0x5922, 0x48ab, 0x7a30, 0x6bb9, + 0x934e, 0x82c7, 0xb05c, 0xa1d5, 0xd56a, 0xc4e3, 0xf678, 0xe7f1, + 0x2e85, 0x3f0c, 0x0d97, 0x1c1e, 0x68a1, 0x7928, 0x4bb3, 0x5a3a, + 0xa2cd, 0xb344, 0x81df, 0x9056, 0xe4e9, 0xf560, 0xc7fb, 0xd672, + 0x3e04, 0x2f8d, 0x1d16, 0x0c9f, 0x7820, 0x69a9, 0x5b32, 0x4abb, + 0xb24c, 0xa3c5, 0x915e, 0x80d7, 0xf468, 0xe5e1, 0xd77a, 0xc6f3, + 0x4d83, 0x5c0a, 0x6e91, 0x7f18, 0x0ba7, 0x1a2e, 0x28b5, 0x393c, + 0xc1cb, 0xd042, 0xe2d9, 0xf350, 0x87ef, 0x9666, 0xa4fd, 0xb574, + 0x5d02, 0x4c8b, 0x7e10, 0x6f99, 0x1b26, 0x0aaf, 0x3834, 0x29bd, + 0xd14a, 0xc0c3, 0xf258, 0xe3d1, 0x976e, 0x86e7, 0xb47c, 0xa5f5, + 0x6c81, 0x7d08, 0x4f93, 0x5e1a, 0x2aa5, 0x3b2c, 0x09b7, 0x183e, + 0xe0c9, 0xf140, 0xc3db, 0xd252, 0xa6ed, 0xb764, 0x85ff, 0x9476, + 0x7c00, 0x6d89, 0x5f12, 0x4e9b, 0x3a24, 0x2bad, 0x1936, 0x08bf, + 0xf048, 0xe1c1, 0xd35a, 0xc2d3, 0xb66c, 0xa7e5, 0x957e, 0x84f7, + 0x8b8f, 0x9a06, 0xa89d, 0xb914, 0xcdab, 0xdc22, 0xeeb9, 0xff30, + 0x07c7, 0x164e, 0x24d5, 0x355c, 0x41e3, 0x506a, 0x62f1, 0x7378, + 0x9b0e, 0x8a87, 0xb81c, 0xa995, 0xdd2a, 0xcca3, 0xfe38, 0xefb1, + 0x1746, 0x06cf, 0x3454, 0x25dd, 0x5162, 0x40eb, 0x7270, 0x63f9, + 0xaa8d, 0xbb04, 0x899f, 0x9816, 0xeca9, 0xfd20, 0xcfbb, 0xde32, + 0x26c5, 0x374c, 0x05d7, 0x145e, 0x60e1, 0x7168, 0x43f3, 0x527a, + 0xba0c, 0xab85, 0x991e, 0x8897, 0xfc28, 0xeda1, 0xdf3a, 0xceb3, + 0x3644, 0x27cd, 0x1556, 0x04df, 0x7060, 0x61e9, 0x5372, 0x42fb, + 0xc98b, 0xd802, 0xea99, 0xfb10, 0x8faf, 0x9e26, 0xacbd, 0xbd34, + 0x45c3, 0x544a, 0x66d1, 0x7758, 0x03e7, 0x126e, 0x20f5, 0x317c, + 0xd90a, 0xc883, 0xfa18, 0xeb91, 0x9f2e, 0x8ea7, 0xbc3c, 0xadb5, + 0x5542, 0x44cb, 0x7650, 0x67d9, 0x1366, 0x02ef, 0x3074, 0x21fd, + 0xe889, 0xf900, 0xcb9b, 0xda12, 0xaead, 0xbf24, 0x8dbf, 0x9c36, + 0x64c1, 0x7548, 0x47d3, 0x565a, 0x22e5, 0x336c, 0x01f7, 0x107e, + 0xf808, 0xe981, 0xdb1a, 0xca93, 0xbe2c, 0xafa5, 0x9d3e, 0x8cb7, + 0x7440, 0x65c9, 0x5752, 0x46db, 0x3264, 0x23ed, 0x1176, 0x00ff +}; + +static unsigned short calc_crc_flex(unsigned char *cp, int size) +{ + unsigned short crc = 0xffff; + + while (size--) + crc = (crc << 8) ^ crc_flex_table[((crc >> 8) ^ *cp++) & 0xff]; + + return crc; +} + +static int check_crc_flex(unsigned char *cp, int size) +{ + unsigned short crc = 0xffff; + + if (size < 3) + return -1; + + while (size--) + crc = (crc << 8) ^ crc_flex_table[((crc >> 8) ^ *cp++) & 0xff]; + + if ((crc & 0xffff) != 0x7070) + return -1; + + return 0; +} + +static int check_crc_16(unsigned char *cp, int size) +{ + unsigned short crc = 0x0000; + + if (size < 3) + return -1; + + crc = crc16(0, cp, size); + + if (crc != 0x0000) + return -1; + + return 0; +} + +/* + * Standard encapsulation + */ + +static int kiss_esc(unsigned char *s, unsigned char *d, int len) +{ + unsigned char *ptr = d; + unsigned char c; + + /* + * Send an initial END character to flush out any data that may have + * accumulated in the receiver due to line noise. + */ + + *ptr++ = END; + + while (len-- > 0) { + switch (c = *s++) { + case END: + *ptr++ = ESC; + *ptr++ = ESC_END; + break; + case ESC: + *ptr++ = ESC; + *ptr++ = ESC_ESC; + break; + default: + *ptr++ = c; + break; + } + } + + *ptr++ = END; + + return ptr - d; +} + +/* + * MW: + * OK its ugly, but tell me a better solution without copying the + * packet to a temporary buffer :-) + */ +static int kiss_esc_crc(unsigned char *s, unsigned char *d, unsigned short crc, + int len) +{ + unsigned char *ptr = d; + unsigned char c=0; + + *ptr++ = END; + while (len > 0) { + if (len > 2) + c = *s++; + else if (len > 1) + c = crc >> 8; + else + c = crc & 0xff; + + len--; + + switch (c) { + case END: + *ptr++ = ESC; + *ptr++ = ESC_END; + break; + case ESC: + *ptr++ = ESC; + *ptr++ = ESC_ESC; + break; + default: + *ptr++ = c; + break; + } + } + *ptr++ = END; + + return ptr - d; +} + +/* Send one completely decapsulated AX.25 packet to the AX.25 layer. */ +static void ax_bump(struct mkiss *ax) +{ + struct sk_buff *skb; + int count; + + spin_lock_bh(&ax->buflock); + if (ax->rbuff[0] > 0x0f) { + if (ax->rbuff[0] & 0x80) { + if (check_crc_16(ax->rbuff, ax->rcount) < 0) { + ax->dev->stats.rx_errors++; + spin_unlock_bh(&ax->buflock); + + return; + } + if (ax->crcmode != CRC_MODE_SMACK && ax->crcauto) { + printk(KERN_INFO + "mkiss: %s: Switching to crc-smack\n", + ax->dev->name); + ax->crcmode = CRC_MODE_SMACK; + } + ax->rcount -= 2; + *ax->rbuff &= ~0x80; + } else if (ax->rbuff[0] & 0x20) { + if (check_crc_flex(ax->rbuff, ax->rcount) < 0) { + ax->dev->stats.rx_errors++; + spin_unlock_bh(&ax->buflock); + return; + } + if (ax->crcmode != CRC_MODE_FLEX && ax->crcauto) { + printk(KERN_INFO + "mkiss: %s: Switching to crc-flexnet\n", + ax->dev->name); + ax->crcmode = CRC_MODE_FLEX; + } + ax->rcount -= 2; + + /* + * dl9sau bugfix: the trailling two bytes flexnet crc + * will not be passed to the kernel. thus we have to + * correct the kissparm signature, because it indicates + * a crc but there's none + */ + *ax->rbuff &= ~0x20; + } + } + + count = ax->rcount; + + if ((skb = dev_alloc_skb(count)) == NULL) { + printk(KERN_ERR "mkiss: %s: memory squeeze, dropping packet.\n", + ax->dev->name); + ax->dev->stats.rx_dropped++; + spin_unlock_bh(&ax->buflock); + return; + } + + skb_put_data(skb, ax->rbuff, count); + skb->protocol = ax25_type_trans(skb, ax->dev); + netif_rx(skb); + ax->dev->stats.rx_packets++; + ax->dev->stats.rx_bytes += count; + spin_unlock_bh(&ax->buflock); +} + +static void kiss_unesc(struct mkiss *ax, unsigned char s) +{ + switch (s) { + case END: + /* drop keeptest bit = VSV */ + if (test_bit(AXF_KEEPTEST, &ax->flags)) + clear_bit(AXF_KEEPTEST, &ax->flags); + + if (!test_and_clear_bit(AXF_ERROR, &ax->flags) && (ax->rcount > 2)) + ax_bump(ax); + + clear_bit(AXF_ESCAPE, &ax->flags); + ax->rcount = 0; + return; + + case ESC: + set_bit(AXF_ESCAPE, &ax->flags); + return; + case ESC_ESC: + if (test_and_clear_bit(AXF_ESCAPE, &ax->flags)) + s = ESC; + break; + case ESC_END: + if (test_and_clear_bit(AXF_ESCAPE, &ax->flags)) + s = END; + break; + } + + spin_lock_bh(&ax->buflock); + if (!test_bit(AXF_ERROR, &ax->flags)) { + if (ax->rcount < ax->buffsize) { + ax->rbuff[ax->rcount++] = s; + spin_unlock_bh(&ax->buflock); + return; + } + + ax->dev->stats.rx_over_errors++; + set_bit(AXF_ERROR, &ax->flags); + } + spin_unlock_bh(&ax->buflock); +} + +static int ax_set_mac_address(struct net_device *dev, void *addr) +{ + struct sockaddr_ax25 *sa = addr; + + netif_tx_lock_bh(dev); + netif_addr_lock(dev); + memcpy(dev->dev_addr, &sa->sax25_call, AX25_ADDR_LEN); + netif_addr_unlock(dev); + netif_tx_unlock_bh(dev); + + return 0; +} + +/*---------------------------------------------------------------------------*/ + +static void ax_changedmtu(struct mkiss *ax) +{ + struct net_device *dev = ax->dev; + unsigned char *xbuff, *rbuff, *oxbuff, *orbuff; + int len; + + len = dev->mtu * 2; + + /* + * allow for arrival of larger UDP packets, even if we say not to + * also fixes a bug in which SunOS sends 512-byte packets even with + * an MSS of 128 + */ + if (len < 576 * 2) + len = 576 * 2; + + xbuff = kmalloc(len + 4, GFP_ATOMIC); + rbuff = kmalloc(len + 4, GFP_ATOMIC); + + if (xbuff == NULL || rbuff == NULL) { + printk(KERN_ERR "mkiss: %s: unable to grow ax25 buffers, " + "MTU change cancelled.\n", + ax->dev->name); + dev->mtu = ax->mtu; + kfree(xbuff); + kfree(rbuff); + return; + } + + spin_lock_bh(&ax->buflock); + + oxbuff = ax->xbuff; + ax->xbuff = xbuff; + orbuff = ax->rbuff; + ax->rbuff = rbuff; + + if (ax->xleft) { + if (ax->xleft <= len) { + memcpy(ax->xbuff, ax->xhead, ax->xleft); + } else { + ax->xleft = 0; + dev->stats.tx_dropped++; + } + } + + ax->xhead = ax->xbuff; + + if (ax->rcount) { + if (ax->rcount <= len) { + memcpy(ax->rbuff, orbuff, ax->rcount); + } else { + ax->rcount = 0; + dev->stats.rx_over_errors++; + set_bit(AXF_ERROR, &ax->flags); + } + } + + ax->mtu = dev->mtu + 73; + ax->buffsize = len; + + spin_unlock_bh(&ax->buflock); + + kfree(oxbuff); + kfree(orbuff); +} + +/* Encapsulate one AX.25 packet and stuff into a TTY queue. */ +static void ax_encaps(struct net_device *dev, unsigned char *icp, int len) +{ + struct mkiss *ax = netdev_priv(dev); + unsigned char *p; + int actual, count; + + if (ax->mtu != ax->dev->mtu + 73) /* Someone has been ifconfigging */ + ax_changedmtu(ax); + + if (len > ax->mtu) { /* Sigh, shouldn't occur BUT ... */ + printk(KERN_ERR "mkiss: %s: truncating oversized transmit packet!\n", ax->dev->name); + dev->stats.tx_dropped++; + netif_start_queue(dev); + return; + } + + p = icp; + + spin_lock_bh(&ax->buflock); + if ((*p & 0x0f) != 0) { + /* Configuration Command (kissparms(1). + * Protocol spec says: never append CRC. + * This fixes a very old bug in the linux + * kiss driver. -- dl9sau */ + switch (*p & 0xff) { + case 0x85: + /* command from userspace especially for us, + * not for delivery to the tnc */ + if (len > 1) { + int cmd = (p[1] & 0xff); + switch(cmd) { + case 3: + ax->crcmode = CRC_MODE_SMACK; + break; + case 2: + ax->crcmode = CRC_MODE_FLEX; + break; + case 1: + ax->crcmode = CRC_MODE_NONE; + break; + case 0: + default: + ax->crcmode = CRC_MODE_SMACK_TEST; + cmd = 0; + } + ax->crcauto = (cmd ? 0 : 1); + printk(KERN_INFO "mkiss: %s: crc mode set to %d\n", + ax->dev->name, cmd); + } + spin_unlock_bh(&ax->buflock); + netif_start_queue(dev); + + return; + default: + count = kiss_esc(p, ax->xbuff, len); + } + } else { + unsigned short crc; + switch (ax->crcmode) { + case CRC_MODE_SMACK_TEST: + ax->crcmode = CRC_MODE_FLEX_TEST; + printk(KERN_INFO "mkiss: %s: Trying crc-smack\n", ax->dev->name); + // fall through + case CRC_MODE_SMACK: + *p |= 0x80; + crc = swab16(crc16(0, p, len)); + count = kiss_esc_crc(p, ax->xbuff, crc, len+2); + break; + case CRC_MODE_FLEX_TEST: + ax->crcmode = CRC_MODE_NONE; + printk(KERN_INFO "mkiss: %s: Trying crc-flexnet\n", ax->dev->name); + // fall through + case CRC_MODE_FLEX: + *p |= 0x20; + crc = calc_crc_flex(p, len); + count = kiss_esc_crc(p, ax->xbuff, crc, len+2); + break; + + default: + count = kiss_esc(p, ax->xbuff, len); + } + } + spin_unlock_bh(&ax->buflock); + + set_bit(TTY_DO_WRITE_WAKEUP, &ax->tty->flags); + actual = ax->tty->ops->write(ax->tty, ax->xbuff, count); + dev->stats.tx_packets++; + dev->stats.tx_bytes += actual; + + netif_trans_update(ax->dev); + ax->xleft = count - actual; + ax->xhead = ax->xbuff + actual; +} + +/* Encapsulate an AX.25 packet and kick it into a TTY queue. */ +static netdev_tx_t ax_xmit(struct sk_buff *skb, struct net_device *dev) +{ + struct mkiss *ax = netdev_priv(dev); + + if (skb->protocol == htons(ETH_P_IP)) + return ax25_ip_xmit(skb); + + if (!netif_running(dev)) { + printk(KERN_ERR "mkiss: %s: xmit call when iface is down\n", dev->name); + return NETDEV_TX_BUSY; + } + + if (netif_queue_stopped(dev)) { + /* + * May be we must check transmitter timeout here ? + * 14 Oct 1994 Dmitry Gorodchanin. + */ + if (time_before(jiffies, dev_trans_start(dev) + 20 * HZ)) { + /* 20 sec timeout not reached */ + return NETDEV_TX_BUSY; + } + + printk(KERN_ERR "mkiss: %s: transmit timed out, %s?\n", dev->name, + (tty_chars_in_buffer(ax->tty) || ax->xleft) ? + "bad line quality" : "driver error"); + + ax->xleft = 0; + clear_bit(TTY_DO_WRITE_WAKEUP, &ax->tty->flags); + netif_start_queue(dev); + } + + /* We were not busy, so we are now... :-) */ + netif_stop_queue(dev); + ax_encaps(dev, skb->data, skb->len); + kfree_skb(skb); + + return NETDEV_TX_OK; +} + +static int ax_open_dev(struct net_device *dev) +{ + struct mkiss *ax = netdev_priv(dev); + + if (ax->tty == NULL) + return -ENODEV; + + return 0; +} + +/* Open the low-level part of the AX25 channel. Easy! */ +static int ax_open(struct net_device *dev) +{ + struct mkiss *ax = netdev_priv(dev); + unsigned long len; + + if (ax->tty == NULL) + return -ENODEV; + + /* + * Allocate the frame buffers: + * + * rbuff Receive buffer. + * xbuff Transmit buffer. + */ + len = dev->mtu * 2; + + /* + * allow for arrival of larger UDP packets, even if we say not to + * also fixes a bug in which SunOS sends 512-byte packets even with + * an MSS of 128 + */ + if (len < 576 * 2) + len = 576 * 2; + + if ((ax->rbuff = kmalloc(len + 4, GFP_KERNEL)) == NULL) + goto norbuff; + + if ((ax->xbuff = kmalloc(len + 4, GFP_KERNEL)) == NULL) + goto noxbuff; + + ax->mtu = dev->mtu + 73; + ax->buffsize = len; + ax->rcount = 0; + ax->xleft = 0; + + ax->flags &= (1 << AXF_INUSE); /* Clear ESCAPE & ERROR flags */ + + spin_lock_init(&ax->buflock); + + return 0; + +noxbuff: + kfree(ax->rbuff); + +norbuff: + return -ENOMEM; +} + + +/* Close the low-level part of the AX25 channel. Easy! */ +static int ax_close(struct net_device *dev) +{ + struct mkiss *ax = netdev_priv(dev); + + if (ax->tty) + clear_bit(TTY_DO_WRITE_WAKEUP, &ax->tty->flags); + + netif_stop_queue(dev); + + return 0; +} + +static const struct net_device_ops ax_netdev_ops = { + .ndo_open = ax_open_dev, + .ndo_stop = ax_close, + .ndo_start_xmit = ax_xmit, + .ndo_set_mac_address = ax_set_mac_address, +}; + +static void ax_setup(struct net_device *dev) +{ + /* Finish setting up the DEVICE info. */ + dev->mtu = AX_MTU; + dev->hard_header_len = AX25_MAX_HEADER_LEN; + dev->addr_len = AX25_ADDR_LEN; + dev->type = ARPHRD_AX25; + dev->tx_queue_len = 10; + dev->header_ops = &ax25_header_ops; + dev->netdev_ops = &ax_netdev_ops; + + + memcpy(dev->broadcast, &ax25_bcast, AX25_ADDR_LEN); + memcpy(dev->dev_addr, &ax25_defaddr, AX25_ADDR_LEN); + + dev->flags = IFF_BROADCAST | IFF_MULTICAST; +} + +/* + * We have a potential race on dereferencing tty->disc_data, because the tty + * layer provides no locking at all - thus one cpu could be running + * sixpack_receive_buf while another calls sixpack_close, which zeroes + * tty->disc_data and frees the memory that sixpack_receive_buf is using. The + * best way to fix this is to use a rwlock in the tty struct, but for now we + * use a single global rwlock for all ttys in ppp line discipline. + */ +static DEFINE_RWLOCK(disc_data_lock); + +static struct mkiss *mkiss_get(struct tty_struct *tty) +{ + struct mkiss *ax; + + read_lock(&disc_data_lock); + ax = tty->disc_data; + if (ax) + atomic_inc(&ax->refcnt); + read_unlock(&disc_data_lock); + + return ax; +} + +static void mkiss_put(struct mkiss *ax) +{ + if (atomic_dec_and_test(&ax->refcnt)) + up(&ax->dead_sem); +} + +static int crc_force = 0; /* Can be overridden with insmod */ + +static int mkiss_open(struct tty_struct *tty) +{ + struct net_device *dev; + struct mkiss *ax; + int err; + + if (!capable(CAP_NET_ADMIN)) + return -EPERM; + if (tty->ops->write == NULL) + return -EOPNOTSUPP; + + dev = alloc_netdev(sizeof(struct mkiss), "ax%d", NET_NAME_UNKNOWN, + ax_setup); + if (!dev) { + err = -ENOMEM; + goto out; + } + + ax = netdev_priv(dev); + ax->dev = dev; + + spin_lock_init(&ax->buflock); + atomic_set(&ax->refcnt, 1); + sema_init(&ax->dead_sem, 0); + + ax->tty = tty; + tty->disc_data = ax; + tty->receive_room = 65535; + + tty_driver_flush_buffer(tty); + + /* Restore default settings */ + dev->type = ARPHRD_AX25; + + /* Perform the low-level AX25 initialization. */ + err = ax_open(ax->dev); + if (err) + goto out_free_netdev; + + err = register_netdev(dev); + if (err) + goto out_free_buffers; + + /* after register_netdev() - because else printk smashes the kernel */ + switch (crc_force) { + case 3: + ax->crcmode = CRC_MODE_SMACK; + printk(KERN_INFO "mkiss: %s: crc mode smack forced.\n", + ax->dev->name); + break; + case 2: + ax->crcmode = CRC_MODE_FLEX; + printk(KERN_INFO "mkiss: %s: crc mode flexnet forced.\n", + ax->dev->name); + break; + case 1: + ax->crcmode = CRC_MODE_NONE; + printk(KERN_INFO "mkiss: %s: crc mode disabled.\n", + ax->dev->name); + break; + case 0: + /* fall through */ + default: + crc_force = 0; + printk(KERN_INFO "mkiss: %s: crc mode is auto.\n", + ax->dev->name); + ax->crcmode = CRC_MODE_SMACK_TEST; + } + ax->crcauto = (crc_force ? 0 : 1); + + netif_start_queue(dev); + + /* Done. We have linked the TTY line to a channel. */ + return 0; + +out_free_buffers: + kfree(ax->rbuff); + kfree(ax->xbuff); + +out_free_netdev: + free_netdev(dev); + +out: + return err; +} + +static void mkiss_close(struct tty_struct *tty) +{ + struct mkiss *ax; + + write_lock_irq(&disc_data_lock); + ax = tty->disc_data; + tty->disc_data = NULL; + write_unlock_irq(&disc_data_lock); + + if (!ax) + return; + + /* + * We have now ensured that nobody can start using ap from now on, but + * we have to wait for all existing users to finish. + */ + if (!atomic_dec_and_test(&ax->refcnt)) + down(&ax->dead_sem); + /* + * Halt the transmit queue so that a new transmit cannot scribble + * on our buffers + */ + netif_stop_queue(ax->dev); + + unregister_netdev(ax->dev); + + /* Free all AX25 frame buffers after unreg. */ + kfree(ax->rbuff); + kfree(ax->xbuff); + + ax->tty = NULL; + + free_netdev(ax->dev); +} + +/* Perform I/O control on an active ax25 channel. */ +static int mkiss_ioctl(struct tty_struct *tty, struct file *file, + unsigned int cmd, unsigned long arg) +{ + struct mkiss *ax = mkiss_get(tty); + struct net_device *dev; + unsigned int tmp, err; + + /* First make sure we're connected. */ + if (ax == NULL) + return -ENXIO; + dev = ax->dev; + + switch (cmd) { + case SIOCGIFNAME: + err = copy_to_user((void __user *) arg, ax->dev->name, + strlen(ax->dev->name) + 1) ? -EFAULT : 0; + break; + + case SIOCGIFENCAP: + err = put_user(4, (int __user *) arg); + break; + + case SIOCSIFENCAP: + if (get_user(tmp, (int __user *) arg)) { + err = -EFAULT; + break; + } + + ax->mode = tmp; + dev->addr_len = AX25_ADDR_LEN; + dev->hard_header_len = AX25_KISS_HEADER_LEN + + AX25_MAX_HEADER_LEN + 3; + dev->type = ARPHRD_AX25; + + err = 0; + break; + + case SIOCSIFHWADDR: { + char addr[AX25_ADDR_LEN]; + + if (copy_from_user(&addr, + (void __user *) arg, AX25_ADDR_LEN)) { + err = -EFAULT; + break; + } + + netif_tx_lock_bh(dev); + memcpy(dev->dev_addr, addr, AX25_ADDR_LEN); + netif_tx_unlock_bh(dev); + + err = 0; + break; + } + default: + err = -ENOIOCTLCMD; + } + + mkiss_put(ax); + + return err; +} + +#ifdef CONFIG_COMPAT +static long mkiss_compat_ioctl(struct tty_struct *tty, struct file *file, + unsigned int cmd, unsigned long arg) +{ + switch (cmd) { + case SIOCGIFNAME: + case SIOCGIFENCAP: + case SIOCSIFENCAP: + case SIOCSIFHWADDR: + return mkiss_ioctl(tty, file, cmd, + (unsigned long)compat_ptr(arg)); + } + + return -ENOIOCTLCMD; +} +#endif + +/* + * Handle the 'receiver data ready' interrupt. + * This function is called by the 'tty_io' module in the kernel when + * a block of data has been received, which can now be decapsulated + * and sent on to the AX.25 layer for further processing. + */ +static void mkiss_receive_buf(struct tty_struct *tty, const unsigned char *cp, + char *fp, int count) +{ + struct mkiss *ax = mkiss_get(tty); + + if (!ax) + return; + + /* + * Argh! mtu change time! - costs us the packet part received + * at the change + */ + if (ax->mtu != ax->dev->mtu + 73) + ax_changedmtu(ax); + + /* Read the characters out of the buffer */ + while (count--) { + if (fp != NULL && *fp++) { + if (!test_and_set_bit(AXF_ERROR, &ax->flags)) + ax->dev->stats.rx_errors++; + cp++; + continue; + } + + kiss_unesc(ax, *cp++); + } + + mkiss_put(ax); + tty_unthrottle(tty); +} + +/* + * Called by the driver when there's room for more data. If we have + * more packets to send, we send them here. + */ +static void mkiss_write_wakeup(struct tty_struct *tty) +{ + struct mkiss *ax = mkiss_get(tty); + int actual; + + if (!ax) + return; + + if (ax->xleft <= 0) { + /* Now serial buffer is almost free & we can start + * transmission of another packet + */ + clear_bit(TTY_DO_WRITE_WAKEUP, &tty->flags); + + netif_wake_queue(ax->dev); + goto out; + } + + actual = tty->ops->write(tty, ax->xhead, ax->xleft); + ax->xleft -= actual; + ax->xhead += actual; + +out: + mkiss_put(ax); +} + +static struct tty_ldisc_ops ax_ldisc = { + .owner = THIS_MODULE, + .magic = TTY_LDISC_MAGIC, + .name = "mkiss", + .open = mkiss_open, + .close = mkiss_close, + .ioctl = mkiss_ioctl, +#ifdef CONFIG_COMPAT + .compat_ioctl = mkiss_compat_ioctl, +#endif + .receive_buf = mkiss_receive_buf, + .write_wakeup = mkiss_write_wakeup +}; + +static const char banner[] __initconst = KERN_INFO \ + "mkiss: AX.25 Multikiss, Hans Albas PE1AYX\n"; +static const char msg_regfail[] __initconst = KERN_ERR \ + "mkiss: can't register line discipline (err = %d)\n"; + +static int __init mkiss_init_driver(void) +{ + int status; + + printk(banner); + + status = tty_register_ldisc(N_AX25, &ax_ldisc); + if (status != 0) + printk(msg_regfail, status); + + return status; +} + +static const char msg_unregfail[] = KERN_ERR \ + "mkiss: can't unregister line discipline (err = %d)\n"; + +static void __exit mkiss_exit_driver(void) +{ + int ret; + + if ((ret = tty_unregister_ldisc(N_AX25))) + printk(msg_unregfail, ret); +} + +MODULE_AUTHOR("Ralf Baechle DL5RB <ralf@linux-mips.org>"); +MODULE_DESCRIPTION("KISS driver for AX.25 over TTYs"); +module_param(crc_force, int, 0); +MODULE_PARM_DESC(crc_force, "crc [0 = auto | 1 = none | 2 = flexnet | 3 = smack]"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS_LDISC(N_AX25); + +module_init(mkiss_init_driver); +module_exit(mkiss_exit_driver); diff --git a/drivers/net/hamradio/scc.c b/drivers/net/hamradio/scc.c new file mode 100644 index 000000000..6c03932d8 --- /dev/null +++ b/drivers/net/hamradio/scc.c @@ -0,0 +1,2173 @@ +#define RCS_ID "$Id: scc.c,v 1.75 1998/11/04 15:15:01 jreuter Exp jreuter $" + +#define VERSION "3.0" + +/* + * Please use z8530drv-utils-3.0 with this version. + * ------------------ + * + * You can find a subset of the documentation in + * Documentation/networking/z8530drv.txt. + */ + +/* + ******************************************************************** + * SCC.C - Linux driver for Z8530 based HDLC cards for AX.25 * + ******************************************************************** + + + ******************************************************************** + + Copyright (c) 1993, 2000 Joerg Reuter DL1BKE + + portions (c) 1993 Guido ten Dolle PE1NNZ + + ******************************************************************** + + The driver and the programs in the archive are UNDER CONSTRUCTION. + The code is likely to fail, and so your kernel could --- even + a whole network. + + This driver is intended for Amateur Radio use. If you are running it + for commercial purposes, please drop me a note. I am nosy... + + ...BUT: + + ! You m u s t recognize the appropriate legislations of your country ! + ! before you connect a radio to the SCC board and start to transmit or ! + ! receive. The GPL allows you to use the d r i v e r, NOT the RADIO! ! + + For non-Amateur-Radio use please note that you might need a special + allowance/licence from the designer of the SCC Board and/or the + MODEM. + + This program is free software; you can redistribute it and/or modify + it under the terms of the (modified) GNU General Public License + delivered with the Linux kernel source. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should find a copy of the GNU General Public License in + /usr/src/linux/COPYING; + + ******************************************************************** + + + Incomplete history of z8530drv: + ------------------------------- + + 1994-09-13 started to write the driver, rescued most of my own + code (and Hans Alblas' memory buffer pool concept) from + an earlier project "sccdrv" which was initiated by + Guido ten Dolle. Not much of the old driver survived, + though. The first version I put my hands on was sccdrv1.3 + from August 1993. The memory buffer pool concept + appeared in an unauthorized sccdrv version (1.5) from + August 1994. + + 1995-01-31 changed copyright notice to GPL without limitations. + + . + . <SNIP> + . + + 1996-10-05 New semester, new driver... + + * KISS TNC emulator removed (TTY driver) + * Source moved to drivers/net/ + * Includes Z8530 defines from drivers/net/z8530.h + * Uses sk_buffer memory management + * Reduced overhead of /proc/net/z8530drv output + * Streamlined quite a lot things + * Invents brand new bugs... ;-) + + The move to version number 3.0 reflects theses changes. + You can use 'kissbridge' if you need a KISS TNC emulator. + + 1996-12-13 Fixed for Linux networking changes. (G4KLX) + 1997-01-08 Fixed the remaining problems. + 1997-04-02 Hopefully fixed the problems with the new *_timer() + routines, added calibration code. + 1997-10-12 Made SCC_DELAY a CONFIG option, added CONFIG_SCC_TRXECHO + 1998-01-29 Small fix to avoid lock-up on initialization + 1998-09-29 Fixed the "grouping" bugs, tx_inhibit works again, + using dev->tx_queue_len now instead of MAXQUEUE now. + 1998-10-21 Postponed the spinlock changes, would need a lot of + testing I currently don't have the time to. Softdcd doesn't + work. + 1998-11-04 Softdcd does not work correctly in DPLL mode, in fact it + never did. The DPLL locks on noise, the SYNC unit sees + flags that aren't... Restarting the DPLL does not help + either, it resynchronizes too slow and the first received + frame gets lost. + 2000-02-13 Fixed for new network driver interface changes, still + does TX timeouts itself since it uses its own queue + scheme. + + Thanks to all who contributed to this driver with ideas and bug + reports! + + NB -- if you find errors, change something, please let me know + first before you distribute it... And please don't touch + the version number. Just replace my callsign in + "v3.0.dl1bke" with your own. Just to avoid confusion... + + If you want to add your modification to the linux distribution + please (!) contact me first. + + New versions of the driver will be announced on the linux-hams + mailing list on vger.kernel.org. To subscribe send an e-mail + to majordomo@vger.kernel.org with the following line in + the body of the mail: + + subscribe linux-hams + + The content of the "Subject" field will be ignored. + + vy 73, + Joerg Reuter ampr-net: dl1bke@db0pra.ampr.org + AX-25 : DL1BKE @ DB0ABH.#BAY.DEU.EU + Internet: jreuter@yaina.de + www : http://yaina.de/jreuter +*/ + +/* ----------------------------------------------------------------------- */ + +#undef SCC_LDELAY /* slow it even a bit more down */ +#undef SCC_DONT_CHECK /* don't look if the SCCs you specified are available */ + +#define SCC_MAXCHIPS 4 /* number of max. supported chips */ +#define SCC_BUFSIZE 384 /* must not exceed 4096 */ +#undef SCC_DEBUG + +#define SCC_DEFAULT_CLOCK 4915200 + /* default pclock if nothing is specified */ + +/* ----------------------------------------------------------------------- */ + +#include <linux/module.h> +#include <linux/errno.h> +#include <linux/signal.h> +#include <linux/timer.h> +#include <linux/interrupt.h> +#include <linux/ioport.h> +#include <linux/string.h> +#include <linux/in.h> +#include <linux/fcntl.h> +#include <linux/ptrace.h> +#include <linux/delay.h> +#include <linux/skbuff.h> +#include <linux/netdevice.h> +#include <linux/rtnetlink.h> +#include <linux/if_ether.h> +#include <linux/if_arp.h> +#include <linux/socket.h> +#include <linux/init.h> +#include <linux/scc.h> +#include <linux/ctype.h> +#include <linux/kernel.h> +#include <linux/proc_fs.h> +#include <linux/seq_file.h> +#include <linux/bitops.h> + +#include <net/net_namespace.h> +#include <net/ax25.h> + +#include <asm/irq.h> +#include <asm/io.h> +#include <linux/uaccess.h> + +#include "z8530.h" + +static const char banner[] __initconst = KERN_INFO \ + "AX.25: Z8530 SCC driver version "VERSION".dl1bke\n"; + +static void t_dwait(struct timer_list *t); +static void t_txdelay(struct timer_list *t); +static void t_tail(struct timer_list *t); +static void t_busy(struct timer_list *); +static void t_maxkeyup(struct timer_list *); +static void t_idle(struct timer_list *t); +static void scc_tx_done(struct scc_channel *); +static void scc_start_tx_timer(struct scc_channel *, + void (*)(struct timer_list *), unsigned long); +static void scc_start_maxkeyup(struct scc_channel *); +static void scc_start_defer(struct scc_channel *); + +static void z8530_init(void); + +static void init_channel(struct scc_channel *scc); +static void scc_key_trx (struct scc_channel *scc, char tx); +static void scc_init_timer(struct scc_channel *scc); + +static int scc_net_alloc(const char *name, struct scc_channel *scc); +static void scc_net_setup(struct net_device *dev); +static int scc_net_open(struct net_device *dev); +static int scc_net_close(struct net_device *dev); +static void scc_net_rx(struct scc_channel *scc, struct sk_buff *skb); +static netdev_tx_t scc_net_tx(struct sk_buff *skb, + struct net_device *dev); +static int scc_net_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd); +static int scc_net_set_mac_address(struct net_device *dev, void *addr); +static struct net_device_stats * scc_net_get_stats(struct net_device *dev); + +static unsigned char SCC_DriverName[] = "scc"; + +static struct irqflags { unsigned char used : 1; } Ivec[NR_IRQS]; + +static struct scc_channel SCC_Info[2 * SCC_MAXCHIPS]; /* information per channel */ + +static struct scc_ctrl { + io_port chan_A; + io_port chan_B; + int irq; +} SCC_ctrl[SCC_MAXCHIPS+1]; + +static unsigned char Driver_Initialized; +static int Nchips; +static io_port Vector_Latch; + + +/* ******************************************************************** */ +/* * Port Access Functions * */ +/* ******************************************************************** */ + +/* These provide interrupt save 2-step access to the Z8530 registers */ + +static DEFINE_SPINLOCK(iolock); /* Guards paired accesses */ + +static inline unsigned char InReg(io_port port, unsigned char reg) +{ + unsigned long flags; + unsigned char r; + + spin_lock_irqsave(&iolock, flags); +#ifdef SCC_LDELAY + Outb(port, reg); + udelay(SCC_LDELAY); + r=Inb(port); + udelay(SCC_LDELAY); +#else + Outb(port, reg); + r=Inb(port); +#endif + spin_unlock_irqrestore(&iolock, flags); + return r; +} + +static inline void OutReg(io_port port, unsigned char reg, unsigned char val) +{ + unsigned long flags; + + spin_lock_irqsave(&iolock, flags); +#ifdef SCC_LDELAY + Outb(port, reg); udelay(SCC_LDELAY); + Outb(port, val); udelay(SCC_LDELAY); +#else + Outb(port, reg); + Outb(port, val); +#endif + spin_unlock_irqrestore(&iolock, flags); +} + +static inline void wr(struct scc_channel *scc, unsigned char reg, + unsigned char val) +{ + OutReg(scc->ctrl, reg, (scc->wreg[reg] = val)); +} + +static inline void or(struct scc_channel *scc, unsigned char reg, unsigned char val) +{ + OutReg(scc->ctrl, reg, (scc->wreg[reg] |= val)); +} + +static inline void cl(struct scc_channel *scc, unsigned char reg, unsigned char val) +{ + OutReg(scc->ctrl, reg, (scc->wreg[reg] &= ~val)); +} + +/* ******************************************************************** */ +/* * Some useful macros * */ +/* ******************************************************************** */ + +static inline void scc_discard_buffers(struct scc_channel *scc) +{ + unsigned long flags; + + spin_lock_irqsave(&scc->lock, flags); + if (scc->tx_buff != NULL) + { + dev_kfree_skb(scc->tx_buff); + scc->tx_buff = NULL; + } + + while (!skb_queue_empty(&scc->tx_queue)) + dev_kfree_skb(skb_dequeue(&scc->tx_queue)); + + spin_unlock_irqrestore(&scc->lock, flags); +} + + + +/* ******************************************************************** */ +/* * Interrupt Service Routines * */ +/* ******************************************************************** */ + + +/* ----> subroutines for the interrupt handlers <---- */ + +static inline void scc_notify(struct scc_channel *scc, int event) +{ + struct sk_buff *skb; + char *bp; + + if (scc->kiss.fulldup != KISS_DUPLEX_OPTIMA) + return; + + skb = dev_alloc_skb(2); + if (skb != NULL) + { + bp = skb_put(skb, 2); + *bp++ = PARAM_HWEVENT; + *bp++ = event; + scc_net_rx(scc, skb); + } else + scc->stat.nospace++; +} + +static inline void flush_rx_FIFO(struct scc_channel *scc) +{ + int k; + + for (k=0; k<3; k++) + Inb(scc->data); + + if(scc->rx_buff != NULL) /* did we receive something? */ + { + scc->stat.rxerrs++; /* then count it as an error */ + dev_kfree_skb_irq(scc->rx_buff); + scc->rx_buff = NULL; + } +} + +static void start_hunt(struct scc_channel *scc) +{ + if ((scc->modem.clocksrc != CLK_EXTERNAL)) + OutReg(scc->ctrl,R14,SEARCH|scc->wreg[R14]); /* DPLL: enter search mode */ + or(scc,R3,ENT_HM|RxENABLE); /* enable the receiver, hunt mode */ +} + +/* ----> four different interrupt handlers for Tx, Rx, changing of */ +/* DCD/CTS and Rx/Tx errors */ + +/* Transmitter interrupt handler */ +static inline void scc_txint(struct scc_channel *scc) +{ + struct sk_buff *skb; + + scc->stat.txints++; + skb = scc->tx_buff; + + /* send first octet */ + + if (skb == NULL) + { + skb = skb_dequeue(&scc->tx_queue); + scc->tx_buff = skb; + netif_wake_queue(scc->dev); + + if (skb == NULL) + { + scc_tx_done(scc); + Outb(scc->ctrl, RES_Tx_P); + return; + } + + if (skb->len == 0) /* Paranoia... */ + { + dev_kfree_skb_irq(skb); + scc->tx_buff = NULL; + scc_tx_done(scc); + Outb(scc->ctrl, RES_Tx_P); + return; + } + + scc->stat.tx_state = TXS_ACTIVE; + + OutReg(scc->ctrl, R0, RES_Tx_CRC); + /* reset CRC generator */ + or(scc,R10,ABUNDER); /* re-install underrun protection */ + Outb(scc->data,*skb->data); /* send byte */ + skb_pull(skb, 1); + + if (!scc->enhanced) /* reset EOM latch */ + Outb(scc->ctrl,RES_EOM_L); + return; + } + + /* End Of Frame... */ + + if (skb->len == 0) + { + Outb(scc->ctrl, RES_Tx_P); /* reset pending int */ + cl(scc, R10, ABUNDER); /* send CRC */ + dev_kfree_skb_irq(skb); + scc->tx_buff = NULL; + scc->stat.tx_state = TXS_NEWFRAME; /* next frame... */ + return; + } + + /* send octet */ + + Outb(scc->data,*skb->data); + skb_pull(skb, 1); +} + + +/* External/Status interrupt handler */ +static inline void scc_exint(struct scc_channel *scc) +{ + unsigned char status,changes,chg_and_stat; + + scc->stat.exints++; + + status = InReg(scc->ctrl,R0); + changes = status ^ scc->status; + chg_and_stat = changes & status; + + /* ABORT: generated whenever DCD drops while receiving */ + + if (chg_and_stat & BRK_ABRT) /* Received an ABORT */ + flush_rx_FIFO(scc); + + /* HUNT: software DCD; on = waiting for SYNC, off = receiving frame */ + + if ((changes & SYNC_HUNT) && scc->kiss.softdcd) + { + if (status & SYNC_HUNT) + { + scc->dcd = 0; + flush_rx_FIFO(scc); + if ((scc->modem.clocksrc != CLK_EXTERNAL)) + OutReg(scc->ctrl,R14,SEARCH|scc->wreg[R14]); /* DPLL: enter search mode */ + } else { + scc->dcd = 1; + } + + scc_notify(scc, scc->dcd? HWEV_DCD_OFF:HWEV_DCD_ON); + } + + /* DCD: on = start to receive packet, off = ABORT condition */ + /* (a successfully received packet generates a special condition int) */ + + if((changes & DCD) && !scc->kiss.softdcd) /* DCD input changed state */ + { + if(status & DCD) /* DCD is now ON */ + { + start_hunt(scc); + scc->dcd = 1; + } else { /* DCD is now OFF */ + cl(scc,R3,ENT_HM|RxENABLE); /* disable the receiver */ + flush_rx_FIFO(scc); + scc->dcd = 0; + } + + scc_notify(scc, scc->dcd? HWEV_DCD_ON:HWEV_DCD_OFF); + } + +#ifdef notdef + /* CTS: use external TxDelay (what's that good for?!) + * Anyway: If we _could_ use it (BayCom USCC uses CTS for + * own purposes) we _should_ use the "autoenable" feature + * of the Z8530 and not this interrupt... + */ + + if (chg_and_stat & CTS) /* CTS is now ON */ + { + if (scc->kiss.txdelay == 0) /* zero TXDELAY = wait for CTS */ + scc_start_tx_timer(scc, t_txdelay, 0); + } +#endif + + if (scc->stat.tx_state == TXS_ACTIVE && (status & TxEOM)) + { + scc->stat.tx_under++; /* oops, an underrun! count 'em */ + Outb(scc->ctrl, RES_EXT_INT); /* reset ext/status interrupts */ + + if (scc->tx_buff != NULL) + { + dev_kfree_skb_irq(scc->tx_buff); + scc->tx_buff = NULL; + } + + or(scc,R10,ABUNDER); + scc_start_tx_timer(scc, t_txdelay, 0); /* restart transmission */ + } + + scc->status = status; + Outb(scc->ctrl,RES_EXT_INT); +} + + +/* Receiver interrupt handler */ +static inline void scc_rxint(struct scc_channel *scc) +{ + struct sk_buff *skb; + + scc->stat.rxints++; + + if((scc->wreg[5] & RTS) && scc->kiss.fulldup == KISS_DUPLEX_HALF) + { + Inb(scc->data); /* discard char */ + or(scc,R3,ENT_HM); /* enter hunt mode for next flag */ + return; + } + + skb = scc->rx_buff; + + if (skb == NULL) + { + skb = dev_alloc_skb(scc->stat.bufsize); + if (skb == NULL) + { + scc->dev_stat.rx_dropped++; + scc->stat.nospace++; + Inb(scc->data); + or(scc, R3, ENT_HM); + return; + } + + scc->rx_buff = skb; + skb_put_u8(skb, 0); /* KISS data */ + } + + if (skb->len >= scc->stat.bufsize) + { +#ifdef notdef + printk(KERN_DEBUG "z8530drv: oops, scc_rxint() received huge frame...\n"); +#endif + dev_kfree_skb_irq(skb); + scc->rx_buff = NULL; + Inb(scc->data); + or(scc, R3, ENT_HM); + return; + } + + skb_put_u8(skb, Inb(scc->data)); +} + + +/* Receive Special Condition interrupt handler */ +static inline void scc_spint(struct scc_channel *scc) +{ + unsigned char status; + struct sk_buff *skb; + + scc->stat.spints++; + + status = InReg(scc->ctrl,R1); /* read receiver status */ + + Inb(scc->data); /* throw away Rx byte */ + skb = scc->rx_buff; + + if(status & Rx_OVR) /* receiver overrun */ + { + scc->stat.rx_over++; /* count them */ + or(scc,R3,ENT_HM); /* enter hunt mode for next flag */ + + if (skb != NULL) + dev_kfree_skb_irq(skb); + scc->rx_buff = skb = NULL; + } + + if(status & END_FR && skb != NULL) /* end of frame */ + { + /* CRC okay, frame ends on 8 bit boundary and received something ? */ + + if (!(status & CRC_ERR) && (status & 0xe) == RES8 && skb->len > 0) + { + /* ignore last received byte (first of the CRC bytes) */ + skb_trim(skb, skb->len-1); + scc_net_rx(scc, skb); + scc->rx_buff = NULL; + scc->stat.rxframes++; + } else { /* a bad frame */ + dev_kfree_skb_irq(skb); + scc->rx_buff = NULL; + scc->stat.rxerrs++; + } + } + + Outb(scc->ctrl,ERR_RES); +} + + +/* ----> interrupt service routine for the Z8530 <---- */ + +static void scc_isr_dispatch(struct scc_channel *scc, int vector) +{ + spin_lock(&scc->lock); + switch (vector & VECTOR_MASK) + { + case TXINT: scc_txint(scc); break; + case EXINT: scc_exint(scc); break; + case RXINT: scc_rxint(scc); break; + case SPINT: scc_spint(scc); break; + } + spin_unlock(&scc->lock); +} + +/* If the card has a latch for the interrupt vector (like the PA0HZP card) + use it to get the number of the chip that generated the int. + If not: poll all defined chips. + */ + +#define SCC_IRQTIMEOUT 30000 + +static irqreturn_t scc_isr(int irq, void *dev_id) +{ + int chip_irq = (long) dev_id; + unsigned char vector; + struct scc_channel *scc; + struct scc_ctrl *ctrl; + int k; + + if (Vector_Latch) + { + for(k=0; k < SCC_IRQTIMEOUT; k++) + { + Outb(Vector_Latch, 0); /* Generate INTACK */ + + /* Read the vector */ + if((vector=Inb(Vector_Latch)) >= 16 * Nchips) break; + if (vector & 0x01) break; + + scc=&SCC_Info[vector >> 3 ^ 0x01]; + if (!scc->dev) break; + + scc_isr_dispatch(scc, vector); + + OutReg(scc->ctrl,R0,RES_H_IUS); /* Reset Highest IUS */ + } + + if (k == SCC_IRQTIMEOUT) + printk(KERN_WARNING "z8530drv: endless loop in scc_isr()?\n"); + + return IRQ_HANDLED; + } + + /* Find the SCC generating the interrupt by polling all attached SCCs + * reading RR3A (the interrupt pending register) + */ + + ctrl = SCC_ctrl; + while (ctrl->chan_A) + { + if (ctrl->irq != chip_irq) + { + ctrl++; + continue; + } + + scc = NULL; + for (k = 0; InReg(ctrl->chan_A,R3) && k < SCC_IRQTIMEOUT; k++) + { + vector=InReg(ctrl->chan_B,R2); /* Read the vector */ + if (vector & 0x01) break; + + scc = &SCC_Info[vector >> 3 ^ 0x01]; + if (!scc->dev) break; + + scc_isr_dispatch(scc, vector); + } + + if (k == SCC_IRQTIMEOUT) + { + printk(KERN_WARNING "z8530drv: endless loop in scc_isr()?!\n"); + break; + } + + /* This looks weird and it is. At least the BayCom USCC doesn't + * use the Interrupt Daisy Chain, thus we'll have to start + * all over again to be sure not to miss an interrupt from + * (any of) the other chip(s)... + * Honestly, the situation *is* braindamaged... + */ + + if (scc != NULL) + { + OutReg(scc->ctrl,R0,RES_H_IUS); + ctrl = SCC_ctrl; + } else + ctrl++; + } + return IRQ_HANDLED; +} + + + +/* ******************************************************************** */ +/* * Init Channel */ +/* ******************************************************************** */ + + +/* ----> set SCC channel speed <---- */ + +static inline void set_brg(struct scc_channel *scc, unsigned int tc) +{ + cl(scc,R14,BRENABL); /* disable baudrate generator */ + wr(scc,R12,tc & 255); /* brg rate LOW */ + wr(scc,R13,tc >> 8); /* brg rate HIGH */ + or(scc,R14,BRENABL); /* enable baudrate generator */ +} + +static inline void set_speed(struct scc_channel *scc) +{ + unsigned long flags; + spin_lock_irqsave(&scc->lock, flags); + + if (scc->modem.speed > 0) /* paranoia... */ + set_brg(scc, (unsigned) (scc->clock / (scc->modem.speed * 64)) - 2); + + spin_unlock_irqrestore(&scc->lock, flags); +} + + +/* ----> initialize a SCC channel <---- */ + +static inline void init_brg(struct scc_channel *scc) +{ + wr(scc, R14, BRSRC); /* BRG source = PCLK */ + OutReg(scc->ctrl, R14, SSBR|scc->wreg[R14]); /* DPLL source = BRG */ + OutReg(scc->ctrl, R14, SNRZI|scc->wreg[R14]); /* DPLL NRZI mode */ +} + +/* + * Initialization according to the Z8530 manual (SGS-Thomson's version): + * + * 1. Modes and constants + * + * WR9 11000000 chip reset + * WR4 XXXXXXXX Tx/Rx control, async or sync mode + * WR1 0XX00X00 select W/REQ (optional) + * WR2 XXXXXXXX program interrupt vector + * WR3 XXXXXXX0 select Rx control + * WR5 XXXX0XXX select Tx control + * WR6 XXXXXXXX sync character + * WR7 XXXXXXXX sync character + * WR9 000X0XXX select interrupt control + * WR10 XXXXXXXX miscellaneous control (optional) + * WR11 XXXXXXXX clock control + * WR12 XXXXXXXX time constant lower byte (optional) + * WR13 XXXXXXXX time constant upper byte (optional) + * WR14 XXXXXXX0 miscellaneous control + * WR14 XXXSSSSS commands (optional) + * + * 2. Enables + * + * WR14 000SSSS1 baud rate enable + * WR3 SSSSSSS1 Rx enable + * WR5 SSSS1SSS Tx enable + * WR0 10000000 reset Tx CRG (optional) + * WR1 XSS00S00 DMA enable (optional) + * + * 3. Interrupt status + * + * WR15 XXXXXXXX enable external/status + * WR0 00010000 reset external status + * WR0 00010000 reset external status twice + * WR1 SSSXXSXX enable Rx, Tx and Ext/status + * WR9 000SXSSS enable master interrupt enable + * + * 1 = set to one, 0 = reset to zero + * X = user defined, S = same as previous init + * + * + * Note that the implementation differs in some points from above scheme. + * + */ + +static void init_channel(struct scc_channel *scc) +{ + del_timer(&scc->tx_t); + del_timer(&scc->tx_wdog); + + disable_irq(scc->irq); + + wr(scc,R4,X1CLK|SDLC); /* *1 clock, SDLC mode */ + wr(scc,R1,0); /* no W/REQ operation */ + wr(scc,R3,Rx8|RxCRC_ENAB); /* RX 8 bits/char, CRC, disabled */ + wr(scc,R5,Tx8|DTR|TxCRC_ENAB); /* TX 8 bits/char, disabled, DTR */ + wr(scc,R6,0); /* SDLC address zero (not used) */ + wr(scc,R7,FLAG); /* SDLC flag value */ + wr(scc,R9,VIS); /* vector includes status */ + wr(scc,R10,(scc->modem.nrz? NRZ : NRZI)|CRCPS|ABUNDER); /* abort on underrun, preset CRC generator, NRZ(I) */ + wr(scc,R14, 0); + + +/* set clock sources: + + CLK_DPLL: normal halfduplex operation + + RxClk: use DPLL + TxClk: use DPLL + TRxC mode DPLL output + + CLK_EXTERNAL: external clocking (G3RUH or DF9IC modem) + + BayCom: others: + + TxClk = pin RTxC TxClk = pin TRxC + RxClk = pin TRxC RxClk = pin RTxC + + + CLK_DIVIDER: + RxClk = use DPLL + TxClk = pin RTxC + + BayCom: others: + pin TRxC = DPLL pin TRxC = BRG + (RxClk * 1) (RxClk * 32) +*/ + + + switch(scc->modem.clocksrc) + { + case CLK_DPLL: + wr(scc, R11, RCDPLL|TCDPLL|TRxCOI|TRxCDP); + init_brg(scc); + break; + + case CLK_DIVIDER: + wr(scc, R11, ((scc->brand & BAYCOM)? TRxCDP : TRxCBR) | RCDPLL|TCRTxCP|TRxCOI); + init_brg(scc); + break; + + case CLK_EXTERNAL: + wr(scc, R11, (scc->brand & BAYCOM)? RCTRxCP|TCRTxCP : RCRTxCP|TCTRxCP); + OutReg(scc->ctrl, R14, DISDPLL); + break; + + } + + set_speed(scc); /* set baudrate */ + + if(scc->enhanced) + { + or(scc,R15,SHDLCE|FIFOE); /* enable FIFO, SDLC/HDLC Enhancements (From now R7 is R7') */ + wr(scc,R7,AUTOEOM); + } + + if(scc->kiss.softdcd || (InReg(scc->ctrl,R0) & DCD)) + /* DCD is now ON */ + { + start_hunt(scc); + } + + /* enable ABORT, DCD & SYNC/HUNT interrupts */ + + wr(scc,R15, BRKIE|TxUIE|(scc->kiss.softdcd? SYNCIE:DCDIE)); + + Outb(scc->ctrl,RES_EXT_INT); /* reset ext/status interrupts */ + Outb(scc->ctrl,RES_EXT_INT); /* must be done twice */ + + or(scc,R1,INT_ALL_Rx|TxINT_ENAB|EXT_INT_ENAB); /* enable interrupts */ + + scc->status = InReg(scc->ctrl,R0); /* read initial status */ + + or(scc,R9,MIE); /* master interrupt enable */ + + scc_init_timer(scc); + + enable_irq(scc->irq); +} + + + + +/* ******************************************************************** */ +/* * SCC timer functions * */ +/* ******************************************************************** */ + + +/* ----> scc_key_trx sets the time constant for the baudrate + generator and keys the transmitter <---- */ + +static void scc_key_trx(struct scc_channel *scc, char tx) +{ + unsigned int time_const; + + if (scc->brand & PRIMUS) + Outb(scc->ctrl + 4, scc->option | (tx? 0x80 : 0)); + + if (scc->modem.speed < 300) + scc->modem.speed = 1200; + + time_const = (unsigned) (scc->clock / (scc->modem.speed * (tx? 2:64))) - 2; + + disable_irq(scc->irq); + + if (tx) + { + or(scc, R1, TxINT_ENAB); /* t_maxkeyup may have reset these */ + or(scc, R15, TxUIE); + } + + if (scc->modem.clocksrc == CLK_DPLL) + { /* force simplex operation */ + if (tx) + { +#ifdef CONFIG_SCC_TRXECHO + cl(scc, R3, RxENABLE|ENT_HM); /* switch off receiver */ + cl(scc, R15, DCDIE|SYNCIE); /* No DCD changes, please */ +#endif + set_brg(scc, time_const); /* reprogram baudrate generator */ + + /* DPLL -> Rx clk, BRG -> Tx CLK, TRxC mode output, TRxC = BRG */ + wr(scc, R11, RCDPLL|TCBR|TRxCOI|TRxCBR); + + /* By popular demand: tx_inhibit */ + if (scc->kiss.tx_inhibit) + { + or(scc,R5, TxENAB); + scc->wreg[R5] |= RTS; + } else { + or(scc,R5,RTS|TxENAB); /* set the RTS line and enable TX */ + } + } else { + cl(scc,R5,RTS|TxENAB); + + set_brg(scc, time_const); /* reprogram baudrate generator */ + + /* DPLL -> Rx clk, DPLL -> Tx CLK, TRxC mode output, TRxC = DPLL */ + wr(scc, R11, RCDPLL|TCDPLL|TRxCOI|TRxCDP); + +#ifndef CONFIG_SCC_TRXECHO + if (scc->kiss.softdcd) +#endif + { + or(scc,R15, scc->kiss.softdcd? SYNCIE:DCDIE); + start_hunt(scc); + } + } + } else { + if (tx) + { +#ifdef CONFIG_SCC_TRXECHO + if (scc->kiss.fulldup == KISS_DUPLEX_HALF) + { + cl(scc, R3, RxENABLE); + cl(scc, R15, DCDIE|SYNCIE); + } +#endif + + if (scc->kiss.tx_inhibit) + { + or(scc,R5, TxENAB); + scc->wreg[R5] |= RTS; + } else { + or(scc,R5,RTS|TxENAB); /* enable tx */ + } + } else { + cl(scc,R5,RTS|TxENAB); /* disable tx */ + + if ((scc->kiss.fulldup == KISS_DUPLEX_HALF) && +#ifndef CONFIG_SCC_TRXECHO + scc->kiss.softdcd) +#else + 1) +#endif + { + or(scc, R15, scc->kiss.softdcd? SYNCIE:DCDIE); + start_hunt(scc); + } + } + } + + enable_irq(scc->irq); +} + + +/* ----> SCC timer interrupt handler and friends. <---- */ + +static void __scc_start_tx_timer(struct scc_channel *scc, + void (*handler)(struct timer_list *t), + unsigned long when) +{ + del_timer(&scc->tx_t); + + if (when == 0) + { + handler(&scc->tx_t); + } else + if (when != TIMER_OFF) + { + scc->tx_t.function = handler; + scc->tx_t.expires = jiffies + (when*HZ)/100; + add_timer(&scc->tx_t); + } +} + +static void scc_start_tx_timer(struct scc_channel *scc, + void (*handler)(struct timer_list *t), + unsigned long when) +{ + unsigned long flags; + + spin_lock_irqsave(&scc->lock, flags); + __scc_start_tx_timer(scc, handler, when); + spin_unlock_irqrestore(&scc->lock, flags); +} + +static void scc_start_defer(struct scc_channel *scc) +{ + unsigned long flags; + + spin_lock_irqsave(&scc->lock, flags); + del_timer(&scc->tx_wdog); + + if (scc->kiss.maxdefer != 0 && scc->kiss.maxdefer != TIMER_OFF) + { + scc->tx_wdog.function = t_busy; + scc->tx_wdog.expires = jiffies + HZ*scc->kiss.maxdefer; + add_timer(&scc->tx_wdog); + } + spin_unlock_irqrestore(&scc->lock, flags); +} + +static void scc_start_maxkeyup(struct scc_channel *scc) +{ + unsigned long flags; + + spin_lock_irqsave(&scc->lock, flags); + del_timer(&scc->tx_wdog); + + if (scc->kiss.maxkeyup != 0 && scc->kiss.maxkeyup != TIMER_OFF) + { + scc->tx_wdog.function = t_maxkeyup; + scc->tx_wdog.expires = jiffies + HZ*scc->kiss.maxkeyup; + add_timer(&scc->tx_wdog); + } + spin_unlock_irqrestore(&scc->lock, flags); +} + +/* + * This is called from scc_txint() when there are no more frames to send. + * Not exactly a timer function, but it is a close friend of the family... + */ + +static void scc_tx_done(struct scc_channel *scc) +{ + /* + * trx remains keyed in fulldup mode 2 until t_idle expires. + */ + + switch (scc->kiss.fulldup) + { + case KISS_DUPLEX_LINK: + scc->stat.tx_state = TXS_IDLE2; + if (scc->kiss.idletime != TIMER_OFF) + scc_start_tx_timer(scc, t_idle, + scc->kiss.idletime*100); + break; + case KISS_DUPLEX_OPTIMA: + scc_notify(scc, HWEV_ALL_SENT); + break; + default: + scc->stat.tx_state = TXS_BUSY; + scc_start_tx_timer(scc, t_tail, scc->kiss.tailtime); + } + + netif_wake_queue(scc->dev); +} + + +static unsigned char Rand = 17; + +static inline int is_grouped(struct scc_channel *scc) +{ + int k; + struct scc_channel *scc2; + unsigned char grp1, grp2; + + grp1 = scc->kiss.group; + + for (k = 0; k < (Nchips * 2); k++) + { + scc2 = &SCC_Info[k]; + grp2 = scc2->kiss.group; + + if (scc2 == scc || !(scc2->dev && grp2)) + continue; + + if ((grp1 & 0x3f) == (grp2 & 0x3f)) + { + if ( (grp1 & TXGROUP) && (scc2->wreg[R5] & RTS) ) + return 1; + + if ( (grp1 & RXGROUP) && scc2->dcd ) + return 1; + } + } + return 0; +} + +/* DWAIT and SLOTTIME expired + * + * fulldup == 0: DCD is active or Rand > P-persistence: start t_busy timer + * else key trx and start txdelay + * fulldup == 1: key trx and start txdelay + * fulldup == 2: mintime expired, reset status or key trx and start txdelay + */ + +static void t_dwait(struct timer_list *t) +{ + struct scc_channel *scc = from_timer(scc, t, tx_t); + + if (scc->stat.tx_state == TXS_WAIT) /* maxkeyup or idle timeout */ + { + if (skb_queue_empty(&scc->tx_queue)) { /* nothing to send */ + scc->stat.tx_state = TXS_IDLE; + netif_wake_queue(scc->dev); /* t_maxkeyup locked it. */ + return; + } + + scc->stat.tx_state = TXS_BUSY; + } + + if (scc->kiss.fulldup == KISS_DUPLEX_HALF) + { + Rand = Rand * 17 + 31; + + if (scc->dcd || (scc->kiss.persist) < Rand || (scc->kiss.group && is_grouped(scc)) ) + { + scc_start_defer(scc); + scc_start_tx_timer(scc, t_dwait, scc->kiss.slottime); + return ; + } + } + + if ( !(scc->wreg[R5] & RTS) ) + { + scc_key_trx(scc, TX_ON); + scc_start_tx_timer(scc, t_txdelay, scc->kiss.txdelay); + } else { + scc_start_tx_timer(scc, t_txdelay, 0); + } +} + + +/* TXDELAY expired + * + * kick transmission by a fake scc_txint(scc), start 'maxkeyup' watchdog. + */ + +static void t_txdelay(struct timer_list *t) +{ + struct scc_channel *scc = from_timer(scc, t, tx_t); + + scc_start_maxkeyup(scc); + + if (scc->tx_buff == NULL) + { + disable_irq(scc->irq); + scc_txint(scc); + enable_irq(scc->irq); + } +} + + +/* TAILTIME expired + * + * switch off transmitter. If we were stopped by Maxkeyup restart + * transmission after 'mintime' seconds + */ + +static void t_tail(struct timer_list *t) +{ + struct scc_channel *scc = from_timer(scc, t, tx_t); + unsigned long flags; + + spin_lock_irqsave(&scc->lock, flags); + del_timer(&scc->tx_wdog); + scc_key_trx(scc, TX_OFF); + spin_unlock_irqrestore(&scc->lock, flags); + + if (scc->stat.tx_state == TXS_TIMEOUT) /* we had a timeout? */ + { + scc->stat.tx_state = TXS_WAIT; + scc_start_tx_timer(scc, t_dwait, scc->kiss.mintime*100); + return; + } + + scc->stat.tx_state = TXS_IDLE; + netif_wake_queue(scc->dev); +} + + +/* BUSY timeout + * + * throw away send buffers if DCD remains active too long. + */ + +static void t_busy(struct timer_list *t) +{ + struct scc_channel *scc = from_timer(scc, t, tx_wdog); + + del_timer(&scc->tx_t); + netif_stop_queue(scc->dev); /* don't pile on the wabbit! */ + + scc_discard_buffers(scc); + scc->stat.txerrs++; + scc->stat.tx_state = TXS_IDLE; + + netif_wake_queue(scc->dev); +} + +/* MAXKEYUP timeout + * + * this is our watchdog. + */ + +static void t_maxkeyup(struct timer_list *t) +{ + struct scc_channel *scc = from_timer(scc, t, tx_wdog); + unsigned long flags; + + spin_lock_irqsave(&scc->lock, flags); + /* + * let things settle down before we start to + * accept new data. + */ + + netif_stop_queue(scc->dev); + scc_discard_buffers(scc); + + del_timer(&scc->tx_t); + + cl(scc, R1, TxINT_ENAB); /* force an ABORT, but don't */ + cl(scc, R15, TxUIE); /* count it. */ + OutReg(scc->ctrl, R0, RES_Tx_P); + + spin_unlock_irqrestore(&scc->lock, flags); + + scc->stat.txerrs++; + scc->stat.tx_state = TXS_TIMEOUT; + scc_start_tx_timer(scc, t_tail, scc->kiss.tailtime); +} + +/* IDLE timeout + * + * in fulldup mode 2 it keys down the transmitter after 'idle' seconds + * of inactivity. We will not restart transmission before 'mintime' + * expires. + */ + +static void t_idle(struct timer_list *t) +{ + struct scc_channel *scc = from_timer(scc, t, tx_t); + + del_timer(&scc->tx_wdog); + + scc_key_trx(scc, TX_OFF); + if(scc->kiss.mintime) + scc_start_tx_timer(scc, t_dwait, scc->kiss.mintime*100); + scc->stat.tx_state = TXS_WAIT; +} + +static void scc_init_timer(struct scc_channel *scc) +{ + unsigned long flags; + + spin_lock_irqsave(&scc->lock, flags); + scc->stat.tx_state = TXS_IDLE; + spin_unlock_irqrestore(&scc->lock, flags); +} + + +/* ******************************************************************** */ +/* * Set/get L1 parameters * */ +/* ******************************************************************** */ + + +/* + * this will set the "hardware" parameters through KISS commands or ioctl() + */ + +#define CAST(x) (unsigned long)(x) + +static unsigned int scc_set_param(struct scc_channel *scc, unsigned int cmd, unsigned int arg) +{ + switch (cmd) + { + case PARAM_TXDELAY: scc->kiss.txdelay=arg; break; + case PARAM_PERSIST: scc->kiss.persist=arg; break; + case PARAM_SLOTTIME: scc->kiss.slottime=arg; break; + case PARAM_TXTAIL: scc->kiss.tailtime=arg; break; + case PARAM_FULLDUP: scc->kiss.fulldup=arg; break; + case PARAM_DTR: break; /* does someone need this? */ + case PARAM_GROUP: scc->kiss.group=arg; break; + case PARAM_IDLE: scc->kiss.idletime=arg; break; + case PARAM_MIN: scc->kiss.mintime=arg; break; + case PARAM_MAXKEY: scc->kiss.maxkeyup=arg; break; + case PARAM_WAIT: scc->kiss.waittime=arg; break; + case PARAM_MAXDEFER: scc->kiss.maxdefer=arg; break; + case PARAM_TX: scc->kiss.tx_inhibit=arg; break; + + case PARAM_SOFTDCD: + scc->kiss.softdcd=arg; + if (arg) + { + or(scc, R15, SYNCIE); + cl(scc, R15, DCDIE); + start_hunt(scc); + } else { + or(scc, R15, DCDIE); + cl(scc, R15, SYNCIE); + } + break; + + case PARAM_SPEED: + if (arg < 256) + scc->modem.speed=arg*100; + else + scc->modem.speed=arg; + + if (scc->stat.tx_state == 0) /* only switch baudrate on rx... ;-) */ + set_speed(scc); + break; + + case PARAM_RTS: + if ( !(scc->wreg[R5] & RTS) ) + { + if (arg != TX_OFF) { + scc_key_trx(scc, TX_ON); + scc_start_tx_timer(scc, t_txdelay, scc->kiss.txdelay); + } + } else { + if (arg == TX_OFF) + { + scc->stat.tx_state = TXS_BUSY; + scc_start_tx_timer(scc, t_tail, scc->kiss.tailtime); + } + } + break; + + case PARAM_HWEVENT: + scc_notify(scc, scc->dcd? HWEV_DCD_ON:HWEV_DCD_OFF); + break; + + default: return -EINVAL; + } + + return 0; +} + + + +static unsigned long scc_get_param(struct scc_channel *scc, unsigned int cmd) +{ + switch (cmd) + { + case PARAM_TXDELAY: return CAST(scc->kiss.txdelay); + case PARAM_PERSIST: return CAST(scc->kiss.persist); + case PARAM_SLOTTIME: return CAST(scc->kiss.slottime); + case PARAM_TXTAIL: return CAST(scc->kiss.tailtime); + case PARAM_FULLDUP: return CAST(scc->kiss.fulldup); + case PARAM_SOFTDCD: return CAST(scc->kiss.softdcd); + case PARAM_DTR: return CAST((scc->wreg[R5] & DTR)? 1:0); + case PARAM_RTS: return CAST((scc->wreg[R5] & RTS)? 1:0); + case PARAM_SPEED: return CAST(scc->modem.speed); + case PARAM_GROUP: return CAST(scc->kiss.group); + case PARAM_IDLE: return CAST(scc->kiss.idletime); + case PARAM_MIN: return CAST(scc->kiss.mintime); + case PARAM_MAXKEY: return CAST(scc->kiss.maxkeyup); + case PARAM_WAIT: return CAST(scc->kiss.waittime); + case PARAM_MAXDEFER: return CAST(scc->kiss.maxdefer); + case PARAM_TX: return CAST(scc->kiss.tx_inhibit); + default: return NO_SUCH_PARAM; + } + +} + +#undef CAST + +/* ******************************************************************* */ +/* * Send calibration pattern * */ +/* ******************************************************************* */ + +static void scc_stop_calibrate(struct timer_list *t) +{ + struct scc_channel *scc = from_timer(scc, t, tx_wdog); + unsigned long flags; + + spin_lock_irqsave(&scc->lock, flags); + del_timer(&scc->tx_wdog); + scc_key_trx(scc, TX_OFF); + wr(scc, R6, 0); + wr(scc, R7, FLAG); + Outb(scc->ctrl,RES_EXT_INT); /* reset ext/status interrupts */ + Outb(scc->ctrl,RES_EXT_INT); + + netif_wake_queue(scc->dev); + spin_unlock_irqrestore(&scc->lock, flags); +} + + +static void +scc_start_calibrate(struct scc_channel *scc, int duration, unsigned char pattern) +{ + unsigned long flags; + + spin_lock_irqsave(&scc->lock, flags); + netif_stop_queue(scc->dev); + scc_discard_buffers(scc); + + del_timer(&scc->tx_wdog); + + scc->tx_wdog.function = scc_stop_calibrate; + scc->tx_wdog.expires = jiffies + HZ*duration; + add_timer(&scc->tx_wdog); + + /* This doesn't seem to work. Why not? */ + wr(scc, R6, 0); + wr(scc, R7, pattern); + + /* + * Don't know if this works. + * Damn, where is my Z8530 programming manual...? + */ + + Outb(scc->ctrl,RES_EXT_INT); /* reset ext/status interrupts */ + Outb(scc->ctrl,RES_EXT_INT); + + scc_key_trx(scc, TX_ON); + spin_unlock_irqrestore(&scc->lock, flags); +} + +/* ******************************************************************* */ +/* * Init channel structures, special HW, etc... * */ +/* ******************************************************************* */ + +/* + * Reset the Z8530s and setup special hardware + */ + +static void z8530_init(void) +{ + struct scc_channel *scc; + int chip, k; + unsigned long flags; + char *flag; + + + printk(KERN_INFO "Init Z8530 driver: %u channels, IRQ", Nchips*2); + + flag=" "; + for (k = 0; k < nr_irqs; k++) + if (Ivec[k].used) + { + printk("%s%d", flag, k); + flag=","; + } + printk("\n"); + + + /* reset and pre-init all chips in the system */ + for (chip = 0; chip < Nchips; chip++) + { + scc=&SCC_Info[2*chip]; + if (!scc->ctrl) continue; + + /* Special SCC cards */ + + if(scc->brand & EAGLE) /* this is an EAGLE card */ + Outb(scc->special,0x08); /* enable interrupt on the board */ + + if(scc->brand & (PC100 | PRIMUS)) /* this is a PC100/PRIMUS card */ + Outb(scc->special,scc->option); /* set the MODEM mode (0x22) */ + + + /* Reset and pre-init Z8530 */ + + spin_lock_irqsave(&scc->lock, flags); + + Outb(scc->ctrl, 0); + OutReg(scc->ctrl,R9,FHWRES); /* force hardware reset */ + udelay(100); /* give it 'a bit' more time than required */ + wr(scc, R2, chip*16); /* interrupt vector */ + wr(scc, R9, VIS); /* vector includes status */ + spin_unlock_irqrestore(&scc->lock, flags); + } + + + Driver_Initialized = 1; +} + +/* + * Allocate device structure, err, instance, and register driver + */ + +static int scc_net_alloc(const char *name, struct scc_channel *scc) +{ + int err; + struct net_device *dev; + + dev = alloc_netdev(0, name, NET_NAME_UNKNOWN, scc_net_setup); + if (!dev) + return -ENOMEM; + + dev->ml_priv = scc; + scc->dev = dev; + spin_lock_init(&scc->lock); + timer_setup(&scc->tx_t, NULL, 0); + timer_setup(&scc->tx_wdog, NULL, 0); + + err = register_netdevice(dev); + if (err) { + printk(KERN_ERR "%s: can't register network device (%d)\n", + name, err); + free_netdev(dev); + scc->dev = NULL; + return err; + } + + return 0; +} + + + +/* ******************************************************************** */ +/* * Network driver methods * */ +/* ******************************************************************** */ + +static const struct net_device_ops scc_netdev_ops = { + .ndo_open = scc_net_open, + .ndo_stop = scc_net_close, + .ndo_start_xmit = scc_net_tx, + .ndo_set_mac_address = scc_net_set_mac_address, + .ndo_get_stats = scc_net_get_stats, + .ndo_do_ioctl = scc_net_ioctl, +}; + +/* ----> Initialize device <----- */ + +static void scc_net_setup(struct net_device *dev) +{ + dev->tx_queue_len = 16; /* should be enough... */ + + dev->netdev_ops = &scc_netdev_ops; + dev->header_ops = &ax25_header_ops; + + memcpy(dev->broadcast, &ax25_bcast, AX25_ADDR_LEN); + memcpy(dev->dev_addr, &ax25_defaddr, AX25_ADDR_LEN); + + dev->flags = 0; + + dev->type = ARPHRD_AX25; + dev->hard_header_len = AX25_MAX_HEADER_LEN + AX25_BPQ_HEADER_LEN; + dev->mtu = AX25_DEF_PACLEN; + dev->addr_len = AX25_ADDR_LEN; + +} + +/* ----> open network device <---- */ + +static int scc_net_open(struct net_device *dev) +{ + struct scc_channel *scc = (struct scc_channel *) dev->ml_priv; + + if (!scc->init) + return -EINVAL; + + scc->tx_buff = NULL; + skb_queue_head_init(&scc->tx_queue); + + init_channel(scc); + + netif_start_queue(dev); + return 0; +} + +/* ----> close network device <---- */ + +static int scc_net_close(struct net_device *dev) +{ + struct scc_channel *scc = (struct scc_channel *) dev->ml_priv; + unsigned long flags; + + netif_stop_queue(dev); + + spin_lock_irqsave(&scc->lock, flags); + Outb(scc->ctrl,0); /* Make sure pointer is written */ + wr(scc,R1,0); /* disable interrupts */ + wr(scc,R3,0); + spin_unlock_irqrestore(&scc->lock, flags); + + del_timer_sync(&scc->tx_t); + del_timer_sync(&scc->tx_wdog); + + scc_discard_buffers(scc); + + return 0; +} + +/* ----> receive frame, called from scc_rxint() <---- */ + +static void scc_net_rx(struct scc_channel *scc, struct sk_buff *skb) +{ + if (skb->len == 0) { + dev_kfree_skb_irq(skb); + return; + } + + scc->dev_stat.rx_packets++; + scc->dev_stat.rx_bytes += skb->len; + + skb->protocol = ax25_type_trans(skb, scc->dev); + + netif_rx(skb); +} + +/* ----> transmit frame <---- */ + +static netdev_tx_t scc_net_tx(struct sk_buff *skb, struct net_device *dev) +{ + struct scc_channel *scc = (struct scc_channel *) dev->ml_priv; + unsigned long flags; + char kisscmd; + + if (skb->protocol == htons(ETH_P_IP)) + return ax25_ip_xmit(skb); + + if (skb->len > scc->stat.bufsize || skb->len < 2) { + scc->dev_stat.tx_dropped++; /* bogus frame */ + dev_kfree_skb(skb); + return NETDEV_TX_OK; + } + + scc->dev_stat.tx_packets++; + scc->dev_stat.tx_bytes += skb->len; + scc->stat.txframes++; + + kisscmd = *skb->data & 0x1f; + skb_pull(skb, 1); + + if (kisscmd) { + scc_set_param(scc, kisscmd, *skb->data); + dev_kfree_skb(skb); + return NETDEV_TX_OK; + } + + spin_lock_irqsave(&scc->lock, flags); + + if (skb_queue_len(&scc->tx_queue) > scc->dev->tx_queue_len) { + struct sk_buff *skb_del; + skb_del = skb_dequeue(&scc->tx_queue); + dev_kfree_skb(skb_del); + } + skb_queue_tail(&scc->tx_queue, skb); + netif_trans_update(dev); + + + /* + * Start transmission if the trx state is idle or + * t_idle hasn't expired yet. Use dwait/persistence/slottime + * algorithm for normal halfduplex operation. + */ + + if(scc->stat.tx_state == TXS_IDLE || scc->stat.tx_state == TXS_IDLE2) { + scc->stat.tx_state = TXS_BUSY; + if (scc->kiss.fulldup == KISS_DUPLEX_HALF) + __scc_start_tx_timer(scc, t_dwait, scc->kiss.waittime); + else + __scc_start_tx_timer(scc, t_dwait, 0); + } + spin_unlock_irqrestore(&scc->lock, flags); + return NETDEV_TX_OK; +} + +/* ----> ioctl functions <---- */ + +/* + * SIOCSCCCFG - configure driver arg: (struct scc_hw_config *) arg + * SIOCSCCINI - initialize driver arg: --- + * SIOCSCCCHANINI - initialize channel arg: (struct scc_modem *) arg + * SIOCSCCSMEM - set memory arg: (struct scc_mem_config *) arg + * SIOCSCCGKISS - get level 1 parameter arg: (struct scc_kiss_cmd *) arg + * SIOCSCCSKISS - set level 1 parameter arg: (struct scc_kiss_cmd *) arg + * SIOCSCCGSTAT - get driver status arg: (struct scc_stat *) arg + * SIOCSCCCAL - send calib. pattern arg: (struct scc_calibrate *) arg + */ + +static int scc_net_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) +{ + struct scc_kiss_cmd kiss_cmd; + struct scc_mem_config memcfg; + struct scc_hw_config hwcfg; + struct scc_calibrate cal; + struct scc_channel *scc = (struct scc_channel *) dev->ml_priv; + int chan; + unsigned char device_name[IFNAMSIZ]; + void __user *arg = ifr->ifr_data; + + + if (!Driver_Initialized) + { + if (cmd == SIOCSCCCFG) + { + int found = 1; + + if (!capable(CAP_SYS_RAWIO)) return -EPERM; + if (!arg) return -EFAULT; + + if (Nchips >= SCC_MAXCHIPS) + return -EINVAL; + + if (copy_from_user(&hwcfg, arg, sizeof(hwcfg))) + return -EFAULT; + + if (hwcfg.irq == 2) hwcfg.irq = 9; + + if (hwcfg.irq < 0 || hwcfg.irq >= nr_irqs) + return -EINVAL; + + if (!Ivec[hwcfg.irq].used && hwcfg.irq) + { + if (request_irq(hwcfg.irq, scc_isr, + 0, "AX.25 SCC", + (void *)(long) hwcfg.irq)) + printk(KERN_WARNING "z8530drv: warning, cannot get IRQ %d\n", hwcfg.irq); + else + Ivec[hwcfg.irq].used = 1; + } + + if (hwcfg.vector_latch && !Vector_Latch) { + if (!request_region(hwcfg.vector_latch, 1, "scc vector latch")) + printk(KERN_WARNING "z8530drv: warning, cannot reserve vector latch port 0x%lx\n, disabled.", hwcfg.vector_latch); + else + Vector_Latch = hwcfg.vector_latch; + } + + if (hwcfg.clock == 0) + hwcfg.clock = SCC_DEFAULT_CLOCK; + +#ifndef SCC_DONT_CHECK + + if(request_region(hwcfg.ctrl_a, 1, "scc-probe")) + { + disable_irq(hwcfg.irq); + Outb(hwcfg.ctrl_a, 0); + OutReg(hwcfg.ctrl_a, R9, FHWRES); + udelay(100); + OutReg(hwcfg.ctrl_a,R13,0x55); /* is this chip really there? */ + udelay(5); + + if (InReg(hwcfg.ctrl_a,R13) != 0x55) + found = 0; + enable_irq(hwcfg.irq); + release_region(hwcfg.ctrl_a, 1); + } + else + found = 0; +#endif + + if (found) + { + SCC_Info[2*Nchips ].ctrl = hwcfg.ctrl_a; + SCC_Info[2*Nchips ].data = hwcfg.data_a; + SCC_Info[2*Nchips ].irq = hwcfg.irq; + SCC_Info[2*Nchips+1].ctrl = hwcfg.ctrl_b; + SCC_Info[2*Nchips+1].data = hwcfg.data_b; + SCC_Info[2*Nchips+1].irq = hwcfg.irq; + + SCC_ctrl[Nchips].chan_A = hwcfg.ctrl_a; + SCC_ctrl[Nchips].chan_B = hwcfg.ctrl_b; + SCC_ctrl[Nchips].irq = hwcfg.irq; + } + + + for (chan = 0; chan < 2; chan++) + { + sprintf(device_name, "%s%i", SCC_DriverName, 2*Nchips+chan); + + SCC_Info[2*Nchips+chan].special = hwcfg.special; + SCC_Info[2*Nchips+chan].clock = hwcfg.clock; + SCC_Info[2*Nchips+chan].brand = hwcfg.brand; + SCC_Info[2*Nchips+chan].option = hwcfg.option; + SCC_Info[2*Nchips+chan].enhanced = hwcfg.escc; + +#ifdef SCC_DONT_CHECK + printk(KERN_INFO "%s: data port = 0x%3.3x control port = 0x%3.3x\n", + device_name, + SCC_Info[2*Nchips+chan].data, + SCC_Info[2*Nchips+chan].ctrl); + +#else + printk(KERN_INFO "%s: data port = 0x%3.3lx control port = 0x%3.3lx -- %s\n", + device_name, + chan? hwcfg.data_b : hwcfg.data_a, + chan? hwcfg.ctrl_b : hwcfg.ctrl_a, + found? "found" : "missing"); +#endif + + if (found) + { + request_region(SCC_Info[2*Nchips+chan].ctrl, 1, "scc ctrl"); + request_region(SCC_Info[2*Nchips+chan].data, 1, "scc data"); + if (Nchips+chan != 0 && + scc_net_alloc(device_name, + &SCC_Info[2*Nchips+chan])) + return -EINVAL; + } + } + + if (found) Nchips++; + + return 0; + } + + if (cmd == SIOCSCCINI) + { + if (!capable(CAP_SYS_RAWIO)) + return -EPERM; + + if (Nchips == 0) + return -EINVAL; + + z8530_init(); + return 0; + } + + return -EINVAL; /* confuse the user */ + } + + if (!scc->init) + { + if (cmd == SIOCSCCCHANINI) + { + if (!capable(CAP_NET_ADMIN)) return -EPERM; + if (!arg) return -EINVAL; + + scc->stat.bufsize = SCC_BUFSIZE; + + if (copy_from_user(&scc->modem, arg, sizeof(struct scc_modem))) + return -EINVAL; + + /* default KISS Params */ + + if (scc->modem.speed < 4800) + { + scc->kiss.txdelay = 36; /* 360 ms */ + scc->kiss.persist = 42; /* 25% persistence */ /* was 25 */ + scc->kiss.slottime = 16; /* 160 ms */ + scc->kiss.tailtime = 4; /* minimal reasonable value */ + scc->kiss.fulldup = 0; /* CSMA */ + scc->kiss.waittime = 50; /* 500 ms */ + scc->kiss.maxkeyup = 10; /* 10 s */ + scc->kiss.mintime = 3; /* 3 s */ + scc->kiss.idletime = 30; /* 30 s */ + scc->kiss.maxdefer = 120; /* 2 min */ + scc->kiss.softdcd = 0; /* hardware dcd */ + } else { + scc->kiss.txdelay = 10; /* 100 ms */ + scc->kiss.persist = 64; /* 25% persistence */ /* was 25 */ + scc->kiss.slottime = 8; /* 160 ms */ + scc->kiss.tailtime = 1; /* minimal reasonable value */ + scc->kiss.fulldup = 0; /* CSMA */ + scc->kiss.waittime = 50; /* 500 ms */ + scc->kiss.maxkeyup = 7; /* 7 s */ + scc->kiss.mintime = 3; /* 3 s */ + scc->kiss.idletime = 30; /* 30 s */ + scc->kiss.maxdefer = 120; /* 2 min */ + scc->kiss.softdcd = 0; /* hardware dcd */ + } + + scc->tx_buff = NULL; + skb_queue_head_init(&scc->tx_queue); + scc->init = 1; + + return 0; + } + + return -EINVAL; + } + + switch(cmd) + { + case SIOCSCCRESERVED: + return -ENOIOCTLCMD; + + case SIOCSCCSMEM: + if (!capable(CAP_SYS_RAWIO)) return -EPERM; + if (!arg || copy_from_user(&memcfg, arg, sizeof(memcfg))) + return -EINVAL; + scc->stat.bufsize = memcfg.bufsize; + return 0; + + case SIOCSCCGSTAT: + if (!arg || copy_to_user(arg, &scc->stat, sizeof(scc->stat))) + return -EINVAL; + return 0; + + case SIOCSCCGKISS: + if (!arg || copy_from_user(&kiss_cmd, arg, sizeof(kiss_cmd))) + return -EINVAL; + kiss_cmd.param = scc_get_param(scc, kiss_cmd.command); + if (copy_to_user(arg, &kiss_cmd, sizeof(kiss_cmd))) + return -EINVAL; + return 0; + + case SIOCSCCSKISS: + if (!capable(CAP_NET_ADMIN)) return -EPERM; + if (!arg || copy_from_user(&kiss_cmd, arg, sizeof(kiss_cmd))) + return -EINVAL; + return scc_set_param(scc, kiss_cmd.command, kiss_cmd.param); + + case SIOCSCCCAL: + if (!capable(CAP_SYS_RAWIO)) return -EPERM; + if (!arg || copy_from_user(&cal, arg, sizeof(cal)) || cal.time == 0) + return -EINVAL; + + scc_start_calibrate(scc, cal.time, cal.pattern); + return 0; + + default: + return -ENOIOCTLCMD; + + } + + return -EINVAL; +} + +/* ----> set interface callsign <---- */ + +static int scc_net_set_mac_address(struct net_device *dev, void *addr) +{ + struct sockaddr *sa = (struct sockaddr *) addr; + memcpy(dev->dev_addr, sa->sa_data, dev->addr_len); + return 0; +} + +/* ----> get statistics <---- */ + +static struct net_device_stats *scc_net_get_stats(struct net_device *dev) +{ + struct scc_channel *scc = (struct scc_channel *) dev->ml_priv; + + scc->dev_stat.rx_errors = scc->stat.rxerrs + scc->stat.rx_over; + scc->dev_stat.tx_errors = scc->stat.txerrs + scc->stat.tx_under; + scc->dev_stat.rx_fifo_errors = scc->stat.rx_over; + scc->dev_stat.tx_fifo_errors = scc->stat.tx_under; + + return &scc->dev_stat; +} + +/* ******************************************************************** */ +/* * dump statistics to /proc/net/z8530drv * */ +/* ******************************************************************** */ + +#ifdef CONFIG_PROC_FS + +static inline struct scc_channel *scc_net_seq_idx(loff_t pos) +{ + int k; + + for (k = 0; k < Nchips*2; ++k) { + if (!SCC_Info[k].init) + continue; + if (pos-- == 0) + return &SCC_Info[k]; + } + return NULL; +} + +static void *scc_net_seq_start(struct seq_file *seq, loff_t *pos) +{ + return *pos ? scc_net_seq_idx(*pos - 1) : SEQ_START_TOKEN; + +} + +static void *scc_net_seq_next(struct seq_file *seq, void *v, loff_t *pos) +{ + unsigned k; + struct scc_channel *scc = v; + ++*pos; + + for (k = (v == SEQ_START_TOKEN) ? 0 : (scc - SCC_Info)+1; + k < Nchips*2; ++k) { + if (SCC_Info[k].init) + return &SCC_Info[k]; + } + return NULL; +} + +static void scc_net_seq_stop(struct seq_file *seq, void *v) +{ +} + +static int scc_net_seq_show(struct seq_file *seq, void *v) +{ + if (v == SEQ_START_TOKEN) { + seq_puts(seq, "z8530drv-"VERSION"\n"); + } else if (!Driver_Initialized) { + seq_puts(seq, "not initialized\n"); + } else if (!Nchips) { + seq_puts(seq, "chips missing\n"); + } else { + const struct scc_channel *scc = v; + const struct scc_stat *stat = &scc->stat; + const struct scc_kiss *kiss = &scc->kiss; + + + /* dev data ctrl irq clock brand enh vector special option + * baud nrz clocksrc softdcd bufsize + * rxints txints exints spints + * rcvd rxerrs over / xmit txerrs under / nospace bufsize + * txd pers slot tail ful wait min maxk idl defr txof grp + * W ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## + * R ## ## XX ## ## ## ## ## XX ## ## ## ## ## ## ## + */ + + seq_printf(seq, "%s\t%3.3lx %3.3lx %d %lu %2.2x %d %3.3lx %3.3lx %d\n", + scc->dev->name, + scc->data, scc->ctrl, scc->irq, scc->clock, scc->brand, + scc->enhanced, Vector_Latch, scc->special, + scc->option); + seq_printf(seq, "\t%lu %d %d %d %d\n", + scc->modem.speed, scc->modem.nrz, + scc->modem.clocksrc, kiss->softdcd, + stat->bufsize); + seq_printf(seq, "\t%lu %lu %lu %lu\n", + stat->rxints, stat->txints, stat->exints, stat->spints); + seq_printf(seq, "\t%lu %lu %d / %lu %lu %d / %d %d\n", + stat->rxframes, stat->rxerrs, stat->rx_over, + stat->txframes, stat->txerrs, stat->tx_under, + stat->nospace, stat->tx_state); + +#define K(x) kiss->x + seq_printf(seq, "\t%d %d %d %d %d %d %d %d %d %d %d %d\n", + K(txdelay), K(persist), K(slottime), K(tailtime), + K(fulldup), K(waittime), K(mintime), K(maxkeyup), + K(idletime), K(maxdefer), K(tx_inhibit), K(group)); +#undef K +#ifdef SCC_DEBUG + { + int reg; + + seq_printf(seq, "\tW "); + for (reg = 0; reg < 16; reg++) + seq_printf(seq, "%2.2x ", scc->wreg[reg]); + seq_printf(seq, "\n"); + + seq_printf(seq, "\tR %2.2x %2.2x XX ", InReg(scc->ctrl,R0), InReg(scc->ctrl,R1)); + for (reg = 3; reg < 8; reg++) + seq_printf(seq, "%2.2x ", InReg(scc->ctrl, reg)); + seq_printf(seq, "XX "); + for (reg = 9; reg < 16; reg++) + seq_printf(seq, "%2.2x ", InReg(scc->ctrl, reg)); + seq_printf(seq, "\n"); + } +#endif + seq_putc(seq, '\n'); + } + + return 0; +} + +static const struct seq_operations scc_net_seq_ops = { + .start = scc_net_seq_start, + .next = scc_net_seq_next, + .stop = scc_net_seq_stop, + .show = scc_net_seq_show, +}; +#endif /* CONFIG_PROC_FS */ + + +/* ******************************************************************** */ +/* * Init SCC driver * */ +/* ******************************************************************** */ + +static int __init scc_init_driver (void) +{ + char devname[IFNAMSIZ]; + + printk(banner); + + sprintf(devname,"%s0", SCC_DriverName); + + rtnl_lock(); + if (scc_net_alloc(devname, SCC_Info)) { + rtnl_unlock(); + printk(KERN_ERR "z8530drv: cannot initialize module\n"); + return -EIO; + } + rtnl_unlock(); + + proc_create_seq("z8530drv", 0, init_net.proc_net, &scc_net_seq_ops); + + return 0; +} + +static void __exit scc_cleanup_driver(void) +{ + io_port ctrl; + int k; + struct scc_channel *scc; + struct net_device *dev; + + if (Nchips == 0 && (dev = SCC_Info[0].dev)) + { + unregister_netdev(dev); + free_netdev(dev); + } + + /* Guard against chip prattle */ + local_irq_disable(); + + for (k = 0; k < Nchips; k++) + if ( (ctrl = SCC_ctrl[k].chan_A) ) + { + Outb(ctrl, 0); + OutReg(ctrl,R9,FHWRES); /* force hardware reset */ + udelay(50); + } + + /* To unload the port must be closed so no real IRQ pending */ + for (k = 0; k < nr_irqs ; k++) + if (Ivec[k].used) free_irq(k, NULL); + + local_irq_enable(); + + /* Now clean up */ + for (k = 0; k < Nchips*2; k++) + { + scc = &SCC_Info[k]; + if (scc->ctrl) + { + release_region(scc->ctrl, 1); + release_region(scc->data, 1); + } + if (scc->dev) + { + unregister_netdev(scc->dev); + free_netdev(scc->dev); + } + } + + + if (Vector_Latch) + release_region(Vector_Latch, 1); + + remove_proc_entry("z8530drv", init_net.proc_net); +} + +MODULE_AUTHOR("Joerg Reuter <jreuter@yaina.de>"); +MODULE_DESCRIPTION("AX.25 Device Driver for Z8530 based HDLC cards"); +MODULE_SUPPORTED_DEVICE("Z8530 based SCC cards for Amateur Radio"); +MODULE_LICENSE("GPL"); +module_init(scc_init_driver); +module_exit(scc_cleanup_driver); diff --git a/drivers/net/hamradio/yam.c b/drivers/net/hamradio/yam.c new file mode 100644 index 000000000..3db86f247 --- /dev/null +++ b/drivers/net/hamradio/yam.c @@ -0,0 +1,1207 @@ +/*****************************************************************************/ + +/* + * yam.c -- YAM radio modem driver. + * + * Copyright (C) 1998 Frederic Rible F1OAT (frible@teaser.fr) + * Adapted from baycom.c driver written by Thomas Sailer (sailer@ife.ee.ethz.ch) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + * Please note that the GPL allows you to use the driver, NOT the radio. + * In order to use the radio, you need a license from the communications + * authority of your country. + * + * + * History: + * 0.0 F1OAT 06.06.98 Begin of work with baycom.c source code V 0.3 + * 0.1 F1OAT 07.06.98 Add timer polling routine for channel arbitration + * 0.2 F6FBB 08.06.98 Added delay after FPGA programming + * 0.3 F6FBB 29.07.98 Delayed PTT implementation for dupmode=2 + * 0.4 F6FBB 30.07.98 Added TxTail, Slottime and Persistence + * 0.5 F6FBB 01.08.98 Shared IRQs, /proc/net and network statistics + * 0.6 F6FBB 25.08.98 Added 1200Bds format + * 0.7 F6FBB 12.09.98 Added to the kernel configuration + * 0.8 F6FBB 14.10.98 Fixed slottime/persistence timing bug + * OK1ZIA 2.09.01 Fixed "kfree_skb on hard IRQ" + * using dev_kfree_skb_any(). (important in 2.4 kernel) + * + */ + +/*****************************************************************************/ + +#include <linux/module.h> +#include <linux/types.h> +#include <linux/net.h> +#include <linux/in.h> +#include <linux/if.h> +#include <linux/slab.h> +#include <linux/errno.h> +#include <linux/bitops.h> +#include <linux/random.h> +#include <asm/io.h> +#include <linux/interrupt.h> +#include <linux/ioport.h> +#include <linux/firmware.h> +#include <linux/platform_device.h> + +#include <linux/netdevice.h> +#include <linux/if_arp.h> +#include <linux/etherdevice.h> +#include <linux/skbuff.h> +#include <net/ax25.h> + +#include <linux/kernel.h> +#include <linux/proc_fs.h> +#include <linux/seq_file.h> +#include <net/net_namespace.h> + +#include <linux/uaccess.h> +#include <linux/init.h> + +#include <linux/yam.h> + +/* --------------------------------------------------------------------- */ + +static const char yam_drvname[] = "yam"; +static const char yam_drvinfo[] __initconst = KERN_INFO \ + "YAM driver version 0.8 by F1OAT/F6FBB\n"; + +/* --------------------------------------------------------------------- */ + +#define FIRMWARE_9600 "yam/9600.bin" +#define FIRMWARE_1200 "yam/1200.bin" + +#define YAM_9600 1 +#define YAM_1200 2 + +#define NR_PORTS 4 +#define YAM_MAGIC 0xF10A7654 + +/* Transmitter states */ + +#define TX_OFF 0 +#define TX_HEAD 1 +#define TX_DATA 2 +#define TX_CRC1 3 +#define TX_CRC2 4 +#define TX_TAIL 5 + +#define YAM_MAX_FRAME 1024 + +#define DEFAULT_BITRATE 9600 /* bps */ +#define DEFAULT_HOLDD 10 /* sec */ +#define DEFAULT_TXD 300 /* ms */ +#define DEFAULT_TXTAIL 10 /* ms */ +#define DEFAULT_SLOT 100 /* ms */ +#define DEFAULT_PERS 64 /* 0->255 */ + +struct yam_port { + int magic; + int bitrate; + int baudrate; + int iobase; + int irq; + int dupmode; + + struct net_device *dev; + + int nb_rxint; + int nb_mdint; + + /* Parameters section */ + + int txd; /* tx delay */ + int holdd; /* duplex ptt delay */ + int txtail; /* txtail delay */ + int slot; /* slottime */ + int pers; /* persistence */ + + /* Tx section */ + + int tx_state; + int tx_count; + int slotcnt; + unsigned char tx_buf[YAM_MAX_FRAME]; + int tx_len; + int tx_crcl, tx_crch; + struct sk_buff_head send_queue; /* Packets awaiting transmission */ + + /* Rx section */ + + int dcd; + unsigned char rx_buf[YAM_MAX_FRAME]; + int rx_len; + int rx_crcl, rx_crch; +}; + +struct yam_mcs { + unsigned char bits[YAM_FPGA_SIZE]; + int bitrate; + struct yam_mcs *next; +}; + +static struct net_device *yam_devs[NR_PORTS]; + +static struct yam_mcs *yam_data; + +static DEFINE_TIMER(yam_timer, NULL); + +/* --------------------------------------------------------------------- */ + +#define RBR(iobase) (iobase+0) +#define THR(iobase) (iobase+0) +#define IER(iobase) (iobase+1) +#define IIR(iobase) (iobase+2) +#define FCR(iobase) (iobase+2) +#define LCR(iobase) (iobase+3) +#define MCR(iobase) (iobase+4) +#define LSR(iobase) (iobase+5) +#define MSR(iobase) (iobase+6) +#define SCR(iobase) (iobase+7) +#define DLL(iobase) (iobase+0) +#define DLM(iobase) (iobase+1) + +#define YAM_EXTENT 8 + +/* Interrupt Identification Register Bit Masks */ +#define IIR_NOPEND 1 +#define IIR_MSR 0 +#define IIR_TX 2 +#define IIR_RX 4 +#define IIR_LSR 6 +#define IIR_TIMEOUT 12 /* Fifo mode only */ + +#define IIR_MASK 0x0F + +/* Interrupt Enable Register Bit Masks */ +#define IER_RX 1 /* enable rx interrupt */ +#define IER_TX 2 /* enable tx interrupt */ +#define IER_LSR 4 /* enable line status interrupts */ +#define IER_MSR 8 /* enable modem status interrupts */ + +/* Modem Control Register Bit Masks */ +#define MCR_DTR 0x01 /* DTR output */ +#define MCR_RTS 0x02 /* RTS output */ +#define MCR_OUT1 0x04 /* OUT1 output (not accessible in RS232) */ +#define MCR_OUT2 0x08 /* Master Interrupt enable (must be set on PCs) */ +#define MCR_LOOP 0x10 /* Loopback enable */ + +/* Modem Status Register Bit Masks */ +#define MSR_DCTS 0x01 /* Delta CTS input */ +#define MSR_DDSR 0x02 /* Delta DSR */ +#define MSR_DRIN 0x04 /* Delta RI */ +#define MSR_DDCD 0x08 /* Delta DCD */ +#define MSR_CTS 0x10 /* CTS input */ +#define MSR_DSR 0x20 /* DSR input */ +#define MSR_RING 0x40 /* RI input */ +#define MSR_DCD 0x80 /* DCD input */ + +/* line status register bit mask */ +#define LSR_RXC 0x01 +#define LSR_OE 0x02 +#define LSR_PE 0x04 +#define LSR_FE 0x08 +#define LSR_BREAK 0x10 +#define LSR_THRE 0x20 +#define LSR_TSRE 0x40 + +/* Line Control Register Bit Masks */ +#define LCR_DLAB 0x80 +#define LCR_BREAK 0x40 +#define LCR_PZERO 0x28 +#define LCR_PEVEN 0x18 +#define LCR_PODD 0x08 +#define LCR_STOP1 0x00 +#define LCR_STOP2 0x04 +#define LCR_BIT5 0x00 +#define LCR_BIT6 0x02 +#define LCR_BIT7 0x01 +#define LCR_BIT8 0x03 + +/* YAM Modem <-> UART Port mapping */ + +#define TX_RDY MSR_DCTS /* transmitter ready to send */ +#define RX_DCD MSR_DCD /* carrier detect */ +#define RX_FLAG MSR_RING /* hdlc flag received */ +#define FPGA_DONE MSR_DSR /* FPGA is configured */ +#define PTT_ON (MCR_RTS|MCR_OUT2) /* activate PTT */ +#define PTT_OFF (MCR_DTR|MCR_OUT2) /* release PTT */ + +#define ENABLE_RXINT IER_RX /* enable uart rx interrupt during rx */ +#define ENABLE_TXINT IER_MSR /* enable uart ms interrupt during tx */ +#define ENABLE_RTXINT (IER_RX|IER_MSR) /* full duplex operations */ + + +/************************************************************************* +* CRC Tables +************************************************************************/ + +static const unsigned char chktabl[256] = +{0x00, 0x89, 0x12, 0x9b, 0x24, 0xad, 0x36, 0xbf, 0x48, 0xc1, 0x5a, 0xd3, 0x6c, 0xe5, 0x7e, + 0xf7, 0x81, 0x08, 0x93, 0x1a, 0xa5, 0x2c, 0xb7, 0x3e, 0xc9, 0x40, 0xdb, 0x52, 0xed, 0x64, + 0xff, 0x76, 0x02, 0x8b, 0x10, 0x99, 0x26, 0xaf, 0x34, 0xbd, 0x4a, 0xc3, 0x58, 0xd1, 0x6e, + 0xe7, 0x7c, 0xf5, 0x83, 0x0a, 0x91, 0x18, 0xa7, 0x2e, 0xb5, 0x3c, 0xcb, 0x42, 0xd9, 0x50, + 0xef, 0x66, 0xfd, 0x74, 0x04, 0x8d, 0x16, 0x9f, 0x20, 0xa9, 0x32, 0xbb, 0x4c, 0xc5, 0x5e, + 0xd7, 0x68, 0xe1, 0x7a, 0xf3, 0x85, 0x0c, 0x97, 0x1e, 0xa1, 0x28, 0xb3, 0x3a, 0xcd, 0x44, + 0xdf, 0x56, 0xe9, 0x60, 0xfb, 0x72, 0x06, 0x8f, 0x14, 0x9d, 0x22, 0xab, 0x30, 0xb9, 0x4e, + 0xc7, 0x5c, 0xd5, 0x6a, 0xe3, 0x78, 0xf1, 0x87, 0x0e, 0x95, 0x1c, 0xa3, 0x2a, 0xb1, 0x38, + 0xcf, 0x46, 0xdd, 0x54, 0xeb, 0x62, 0xf9, 0x70, 0x08, 0x81, 0x1a, 0x93, 0x2c, 0xa5, 0x3e, + 0xb7, 0x40, 0xc9, 0x52, 0xdb, 0x64, 0xed, 0x76, 0xff, 0x89, 0x00, 0x9b, 0x12, 0xad, 0x24, + 0xbf, 0x36, 0xc1, 0x48, 0xd3, 0x5a, 0xe5, 0x6c, 0xf7, 0x7e, 0x0a, 0x83, 0x18, 0x91, 0x2e, + 0xa7, 0x3c, 0xb5, 0x42, 0xcb, 0x50, 0xd9, 0x66, 0xef, 0x74, 0xfd, 0x8b, 0x02, 0x99, 0x10, + 0xaf, 0x26, 0xbd, 0x34, 0xc3, 0x4a, 0xd1, 0x58, 0xe7, 0x6e, 0xf5, 0x7c, 0x0c, 0x85, 0x1e, + 0x97, 0x28, 0xa1, 0x3a, 0xb3, 0x44, 0xcd, 0x56, 0xdf, 0x60, 0xe9, 0x72, 0xfb, 0x8d, 0x04, + 0x9f, 0x16, 0xa9, 0x20, 0xbb, 0x32, 0xc5, 0x4c, 0xd7, 0x5e, 0xe1, 0x68, 0xf3, 0x7a, 0x0e, + 0x87, 0x1c, 0x95, 0x2a, 0xa3, 0x38, 0xb1, 0x46, 0xcf, 0x54, 0xdd, 0x62, 0xeb, 0x70, 0xf9, + 0x8f, 0x06, 0x9d, 0x14, 0xab, 0x22, 0xb9, 0x30, 0xc7, 0x4e, 0xd5, 0x5c, 0xe3, 0x6a, 0xf1, + 0x78}; +static const unsigned char chktabh[256] = +{0x00, 0x11, 0x23, 0x32, 0x46, 0x57, 0x65, 0x74, 0x8c, 0x9d, 0xaf, 0xbe, 0xca, 0xdb, 0xe9, + 0xf8, 0x10, 0x01, 0x33, 0x22, 0x56, 0x47, 0x75, 0x64, 0x9c, 0x8d, 0xbf, 0xae, 0xda, 0xcb, + 0xf9, 0xe8, 0x21, 0x30, 0x02, 0x13, 0x67, 0x76, 0x44, 0x55, 0xad, 0xbc, 0x8e, 0x9f, 0xeb, + 0xfa, 0xc8, 0xd9, 0x31, 0x20, 0x12, 0x03, 0x77, 0x66, 0x54, 0x45, 0xbd, 0xac, 0x9e, 0x8f, + 0xfb, 0xea, 0xd8, 0xc9, 0x42, 0x53, 0x61, 0x70, 0x04, 0x15, 0x27, 0x36, 0xce, 0xdf, 0xed, + 0xfc, 0x88, 0x99, 0xab, 0xba, 0x52, 0x43, 0x71, 0x60, 0x14, 0x05, 0x37, 0x26, 0xde, 0xcf, + 0xfd, 0xec, 0x98, 0x89, 0xbb, 0xaa, 0x63, 0x72, 0x40, 0x51, 0x25, 0x34, 0x06, 0x17, 0xef, + 0xfe, 0xcc, 0xdd, 0xa9, 0xb8, 0x8a, 0x9b, 0x73, 0x62, 0x50, 0x41, 0x35, 0x24, 0x16, 0x07, + 0xff, 0xee, 0xdc, 0xcd, 0xb9, 0xa8, 0x9a, 0x8b, 0x84, 0x95, 0xa7, 0xb6, 0xc2, 0xd3, 0xe1, + 0xf0, 0x08, 0x19, 0x2b, 0x3a, 0x4e, 0x5f, 0x6d, 0x7c, 0x94, 0x85, 0xb7, 0xa6, 0xd2, 0xc3, + 0xf1, 0xe0, 0x18, 0x09, 0x3b, 0x2a, 0x5e, 0x4f, 0x7d, 0x6c, 0xa5, 0xb4, 0x86, 0x97, 0xe3, + 0xf2, 0xc0, 0xd1, 0x29, 0x38, 0x0a, 0x1b, 0x6f, 0x7e, 0x4c, 0x5d, 0xb5, 0xa4, 0x96, 0x87, + 0xf3, 0xe2, 0xd0, 0xc1, 0x39, 0x28, 0x1a, 0x0b, 0x7f, 0x6e, 0x5c, 0x4d, 0xc6, 0xd7, 0xe5, + 0xf4, 0x80, 0x91, 0xa3, 0xb2, 0x4a, 0x5b, 0x69, 0x78, 0x0c, 0x1d, 0x2f, 0x3e, 0xd6, 0xc7, + 0xf5, 0xe4, 0x90, 0x81, 0xb3, 0xa2, 0x5a, 0x4b, 0x79, 0x68, 0x1c, 0x0d, 0x3f, 0x2e, 0xe7, + 0xf6, 0xc4, 0xd5, 0xa1, 0xb0, 0x82, 0x93, 0x6b, 0x7a, 0x48, 0x59, 0x2d, 0x3c, 0x0e, 0x1f, + 0xf7, 0xe6, 0xd4, 0xc5, 0xb1, 0xa0, 0x92, 0x83, 0x7b, 0x6a, 0x58, 0x49, 0x3d, 0x2c, 0x1e, + 0x0f}; + +/************************************************************************* +* FPGA functions +************************************************************************/ + +static void delay(int ms) +{ + unsigned long timeout = jiffies + ((ms * HZ) / 1000); + while (time_before(jiffies, timeout)) + cpu_relax(); +} + +/* + * reset FPGA + */ + +static void fpga_reset(int iobase) +{ + outb(0, IER(iobase)); + outb(LCR_DLAB | LCR_BIT5, LCR(iobase)); + outb(1, DLL(iobase)); + outb(0, DLM(iobase)); + + outb(LCR_BIT5, LCR(iobase)); + inb(LSR(iobase)); + inb(MSR(iobase)); + /* turn off FPGA supply voltage */ + outb(MCR_OUT1 | MCR_OUT2, MCR(iobase)); + delay(100); + /* turn on FPGA supply voltage again */ + outb(MCR_DTR | MCR_RTS | MCR_OUT1 | MCR_OUT2, MCR(iobase)); + delay(100); +} + +/* + * send one byte to FPGA + */ + +static int fpga_write(int iobase, unsigned char wrd) +{ + unsigned char bit; + int k; + unsigned long timeout = jiffies + HZ / 10; + + for (k = 0; k < 8; k++) { + bit = (wrd & 0x80) ? (MCR_RTS | MCR_DTR) : MCR_DTR; + outb(bit | MCR_OUT1 | MCR_OUT2, MCR(iobase)); + wrd <<= 1; + outb(0xfc, THR(iobase)); + while ((inb(LSR(iobase)) & LSR_TSRE) == 0) + if (time_after(jiffies, timeout)) + return -1; + } + + return 0; +} + +/* + * predef should be 0 for loading user defined mcs + * predef should be YAM_1200 for loading predef 1200 mcs + * predef should be YAM_9600 for loading predef 9600 mcs + */ +static unsigned char *add_mcs(unsigned char *bits, int bitrate, + unsigned int predef) +{ + const char *fw_name[2] = {FIRMWARE_9600, FIRMWARE_1200}; + const struct firmware *fw; + struct platform_device *pdev; + struct yam_mcs *p; + int err; + + switch (predef) { + case 0: + fw = NULL; + break; + case YAM_1200: + case YAM_9600: + predef--; + pdev = platform_device_register_simple("yam", 0, NULL, 0); + if (IS_ERR(pdev)) { + printk(KERN_ERR "yam: Failed to register firmware\n"); + return NULL; + } + err = request_firmware(&fw, fw_name[predef], &pdev->dev); + platform_device_unregister(pdev); + if (err) { + printk(KERN_ERR "Failed to load firmware \"%s\"\n", + fw_name[predef]); + return NULL; + } + if (fw->size != YAM_FPGA_SIZE) { + printk(KERN_ERR "Bogus length %zu in firmware \"%s\"\n", + fw->size, fw_name[predef]); + release_firmware(fw); + return NULL; + } + bits = (unsigned char *)fw->data; + break; + default: + printk(KERN_ERR "yam: Invalid predef number %u\n", predef); + return NULL; + } + + /* If it already exists, replace the bit data */ + p = yam_data; + while (p) { + if (p->bitrate == bitrate) { + memcpy(p->bits, bits, YAM_FPGA_SIZE); + goto out; + } + p = p->next; + } + + /* Allocate a new mcs */ + if ((p = kmalloc(sizeof(struct yam_mcs), GFP_KERNEL)) == NULL) { + release_firmware(fw); + return NULL; + } + memcpy(p->bits, bits, YAM_FPGA_SIZE); + p->bitrate = bitrate; + p->next = yam_data; + yam_data = p; + out: + release_firmware(fw); + return p->bits; +} + +static unsigned char *get_mcs(int bitrate) +{ + struct yam_mcs *p; + + p = yam_data; + while (p) { + if (p->bitrate == bitrate) + return p->bits; + p = p->next; + } + + /* Load predefined mcs data */ + switch (bitrate) { + case 1200: + /* setting predef as YAM_1200 for loading predef 1200 mcs */ + return add_mcs(NULL, bitrate, YAM_1200); + default: + /* setting predef as YAM_9600 for loading predef 9600 mcs */ + return add_mcs(NULL, bitrate, YAM_9600); + } +} + +/* + * download bitstream to FPGA + * data is contained in bits[] array in yam1200.h resp. yam9600.h + */ + +static int fpga_download(int iobase, int bitrate) +{ + int i, rc; + unsigned char *pbits; + + pbits = get_mcs(bitrate); + if (pbits == NULL) + return -1; + + fpga_reset(iobase); + for (i = 0; i < YAM_FPGA_SIZE; i++) { + if (fpga_write(iobase, pbits[i])) { + printk(KERN_ERR "yam: error in write cycle\n"); + return -1; /* write... */ + } + } + + fpga_write(iobase, 0xFF); + rc = inb(MSR(iobase)); /* check DONE signal */ + + /* Needed for some hardwares */ + delay(50); + + return (rc & MSR_DSR) ? 0 : -1; +} + + +/************************************************************************ +* Serial port init +************************************************************************/ + +static void yam_set_uart(struct net_device *dev) +{ + struct yam_port *yp = netdev_priv(dev); + int divisor = 115200 / yp->baudrate; + + outb(0, IER(dev->base_addr)); + outb(LCR_DLAB | LCR_BIT8, LCR(dev->base_addr)); + outb(divisor, DLL(dev->base_addr)); + outb(0, DLM(dev->base_addr)); + outb(LCR_BIT8, LCR(dev->base_addr)); + outb(PTT_OFF, MCR(dev->base_addr)); + outb(0x00, FCR(dev->base_addr)); + + /* Flush pending irq */ + + inb(RBR(dev->base_addr)); + inb(MSR(dev->base_addr)); + + /* Enable rx irq */ + + outb(ENABLE_RTXINT, IER(dev->base_addr)); +} + + +/* --------------------------------------------------------------------- */ + +enum uart { + c_uart_unknown, c_uart_8250, + c_uart_16450, c_uart_16550, c_uart_16550A +}; + +static const char *uart_str[] = +{"unknown", "8250", "16450", "16550", "16550A"}; + +static enum uart yam_check_uart(unsigned int iobase) +{ + unsigned char b1, b2, b3; + enum uart u; + enum uart uart_tab[] = + {c_uart_16450, c_uart_unknown, c_uart_16550, c_uart_16550A}; + + b1 = inb(MCR(iobase)); + outb(b1 | 0x10, MCR(iobase)); /* loopback mode */ + b2 = inb(MSR(iobase)); + outb(0x1a, MCR(iobase)); + b3 = inb(MSR(iobase)) & 0xf0; + outb(b1, MCR(iobase)); /* restore old values */ + outb(b2, MSR(iobase)); + if (b3 != 0x90) + return c_uart_unknown; + inb(RBR(iobase)); + inb(RBR(iobase)); + outb(0x01, FCR(iobase)); /* enable FIFOs */ + u = uart_tab[(inb(IIR(iobase)) >> 6) & 3]; + if (u == c_uart_16450) { + outb(0x5a, SCR(iobase)); + b1 = inb(SCR(iobase)); + outb(0xa5, SCR(iobase)); + b2 = inb(SCR(iobase)); + if ((b1 != 0x5a) || (b2 != 0xa5)) + u = c_uart_8250; + } + return u; +} + +/****************************************************************************** +* Rx Section +******************************************************************************/ +static inline void yam_rx_flag(struct net_device *dev, struct yam_port *yp) +{ + if (yp->dcd && yp->rx_len >= 3 && yp->rx_len < YAM_MAX_FRAME) { + int pkt_len = yp->rx_len - 2 + 1; /* -CRC + kiss */ + struct sk_buff *skb; + + if ((yp->rx_crch & yp->rx_crcl) != 0xFF) { + /* Bad crc */ + } else { + if (!(skb = dev_alloc_skb(pkt_len))) { + printk(KERN_WARNING "%s: memory squeeze, dropping packet\n", dev->name); + ++dev->stats.rx_dropped; + } else { + unsigned char *cp; + cp = skb_put(skb, pkt_len); + *cp++ = 0; /* KISS kludge */ + memcpy(cp, yp->rx_buf, pkt_len - 1); + skb->protocol = ax25_type_trans(skb, dev); + netif_rx(skb); + ++dev->stats.rx_packets; + } + } + } + yp->rx_len = 0; + yp->rx_crcl = 0x21; + yp->rx_crch = 0xf3; +} + +static inline void yam_rx_byte(struct net_device *dev, struct yam_port *yp, unsigned char rxb) +{ + if (yp->rx_len < YAM_MAX_FRAME) { + unsigned char c = yp->rx_crcl; + yp->rx_crcl = (chktabl[c] ^ yp->rx_crch); + yp->rx_crch = (chktabh[c] ^ rxb); + yp->rx_buf[yp->rx_len++] = rxb; + } +} + +/******************************************************************************** +* TX Section +********************************************************************************/ + +static void ptt_on(struct net_device *dev) +{ + outb(PTT_ON, MCR(dev->base_addr)); +} + +static void ptt_off(struct net_device *dev) +{ + outb(PTT_OFF, MCR(dev->base_addr)); +} + +static netdev_tx_t yam_send_packet(struct sk_buff *skb, + struct net_device *dev) +{ + struct yam_port *yp = netdev_priv(dev); + + if (skb->protocol == htons(ETH_P_IP)) + return ax25_ip_xmit(skb); + + skb_queue_tail(&yp->send_queue, skb); + netif_trans_update(dev); + return NETDEV_TX_OK; +} + +static void yam_start_tx(struct net_device *dev, struct yam_port *yp) +{ + if ((yp->tx_state == TX_TAIL) || (yp->txd == 0)) + yp->tx_count = 1; + else + yp->tx_count = (yp->bitrate * yp->txd) / 8000; + yp->tx_state = TX_HEAD; + ptt_on(dev); +} + +static void yam_arbitrate(struct net_device *dev) +{ + struct yam_port *yp = netdev_priv(dev); + + if (yp->magic != YAM_MAGIC || yp->tx_state != TX_OFF || + skb_queue_empty(&yp->send_queue)) + return; + /* tx_state is TX_OFF and there is data to send */ + + if (yp->dupmode) { + /* Full duplex mode, don't wait */ + yam_start_tx(dev, yp); + return; + } + if (yp->dcd) { + /* DCD on, wait slotime ... */ + yp->slotcnt = yp->slot / 10; + return; + } + /* Is slottime passed ? */ + if ((--yp->slotcnt) > 0) + return; + + yp->slotcnt = yp->slot / 10; + + /* is random > persist ? */ + if ((prandom_u32() % 256) > yp->pers) + return; + + yam_start_tx(dev, yp); +} + +static void yam_dotimer(struct timer_list *unused) +{ + int i; + + for (i = 0; i < NR_PORTS; i++) { + struct net_device *dev = yam_devs[i]; + if (dev && netif_running(dev)) + yam_arbitrate(dev); + } + yam_timer.expires = jiffies + HZ / 100; + add_timer(&yam_timer); +} + +static void yam_tx_byte(struct net_device *dev, struct yam_port *yp) +{ + struct sk_buff *skb; + unsigned char b, temp; + + switch (yp->tx_state) { + case TX_OFF: + break; + case TX_HEAD: + if (--yp->tx_count <= 0) { + if (!(skb = skb_dequeue(&yp->send_queue))) { + ptt_off(dev); + yp->tx_state = TX_OFF; + break; + } + yp->tx_state = TX_DATA; + if (skb->data[0] != 0) { +/* do_kiss_params(s, skb->data, skb->len); */ + dev_kfree_skb_any(skb); + break; + } + yp->tx_len = skb->len - 1; /* strip KISS byte */ + if (yp->tx_len >= YAM_MAX_FRAME || yp->tx_len < 2) { + dev_kfree_skb_any(skb); + break; + } + skb_copy_from_linear_data_offset(skb, 1, + yp->tx_buf, + yp->tx_len); + dev_kfree_skb_any(skb); + yp->tx_count = 0; + yp->tx_crcl = 0x21; + yp->tx_crch = 0xf3; + yp->tx_state = TX_DATA; + } + break; + case TX_DATA: + b = yp->tx_buf[yp->tx_count++]; + outb(b, THR(dev->base_addr)); + temp = yp->tx_crcl; + yp->tx_crcl = chktabl[temp] ^ yp->tx_crch; + yp->tx_crch = chktabh[temp] ^ b; + if (yp->tx_count >= yp->tx_len) { + yp->tx_state = TX_CRC1; + } + break; + case TX_CRC1: + yp->tx_crch = chktabl[yp->tx_crcl] ^ yp->tx_crch; + yp->tx_crcl = chktabh[yp->tx_crcl] ^ chktabl[yp->tx_crch] ^ 0xff; + outb(yp->tx_crcl, THR(dev->base_addr)); + yp->tx_state = TX_CRC2; + break; + case TX_CRC2: + outb(chktabh[yp->tx_crch] ^ 0xFF, THR(dev->base_addr)); + if (skb_queue_empty(&yp->send_queue)) { + yp->tx_count = (yp->bitrate * yp->txtail) / 8000; + if (yp->dupmode == 2) + yp->tx_count += (yp->bitrate * yp->holdd) / 8; + if (yp->tx_count == 0) + yp->tx_count = 1; + yp->tx_state = TX_TAIL; + } else { + yp->tx_count = 1; + yp->tx_state = TX_HEAD; + } + ++dev->stats.tx_packets; + break; + case TX_TAIL: + if (--yp->tx_count <= 0) { + yp->tx_state = TX_OFF; + ptt_off(dev); + } + break; + } +} + +/*********************************************************************************** +* ISR routine +************************************************************************************/ + +static irqreturn_t yam_interrupt(int irq, void *dev_id) +{ + struct net_device *dev; + struct yam_port *yp; + unsigned char iir; + int counter = 100; + int i; + int handled = 0; + + for (i = 0; i < NR_PORTS; i++) { + dev = yam_devs[i]; + yp = netdev_priv(dev); + + if (!netif_running(dev)) + continue; + + while ((iir = IIR_MASK & inb(IIR(dev->base_addr))) != IIR_NOPEND) { + unsigned char msr = inb(MSR(dev->base_addr)); + unsigned char lsr = inb(LSR(dev->base_addr)); + unsigned char rxb; + + handled = 1; + + if (lsr & LSR_OE) + ++dev->stats.rx_fifo_errors; + + yp->dcd = (msr & RX_DCD) ? 1 : 0; + + if (--counter <= 0) { + printk(KERN_ERR "%s: too many irq iir=%d\n", + dev->name, iir); + goto out; + } + if (msr & TX_RDY) { + ++yp->nb_mdint; + yam_tx_byte(dev, yp); + } + if (lsr & LSR_RXC) { + ++yp->nb_rxint; + rxb = inb(RBR(dev->base_addr)); + if (msr & RX_FLAG) + yam_rx_flag(dev, yp); + else + yam_rx_byte(dev, yp, rxb); + } + } + } +out: + return IRQ_RETVAL(handled); +} + +#ifdef CONFIG_PROC_FS + +static void *yam_seq_start(struct seq_file *seq, loff_t *pos) +{ + return (*pos < NR_PORTS) ? yam_devs[*pos] : NULL; +} + +static void *yam_seq_next(struct seq_file *seq, void *v, loff_t *pos) +{ + ++*pos; + return (*pos < NR_PORTS) ? yam_devs[*pos] : NULL; +} + +static void yam_seq_stop(struct seq_file *seq, void *v) +{ +} + +static int yam_seq_show(struct seq_file *seq, void *v) +{ + struct net_device *dev = v; + const struct yam_port *yp = netdev_priv(dev); + + seq_printf(seq, "Device %s\n", dev->name); + seq_printf(seq, " Up %d\n", netif_running(dev)); + seq_printf(seq, " Speed %u\n", yp->bitrate); + seq_printf(seq, " IoBase 0x%x\n", yp->iobase); + seq_printf(seq, " BaudRate %u\n", yp->baudrate); + seq_printf(seq, " IRQ %u\n", yp->irq); + seq_printf(seq, " TxState %u\n", yp->tx_state); + seq_printf(seq, " Duplex %u\n", yp->dupmode); + seq_printf(seq, " HoldDly %u\n", yp->holdd); + seq_printf(seq, " TxDelay %u\n", yp->txd); + seq_printf(seq, " TxTail %u\n", yp->txtail); + seq_printf(seq, " SlotTime %u\n", yp->slot); + seq_printf(seq, " Persist %u\n", yp->pers); + seq_printf(seq, " TxFrames %lu\n", dev->stats.tx_packets); + seq_printf(seq, " RxFrames %lu\n", dev->stats.rx_packets); + seq_printf(seq, " TxInt %u\n", yp->nb_mdint); + seq_printf(seq, " RxInt %u\n", yp->nb_rxint); + seq_printf(seq, " RxOver %lu\n", dev->stats.rx_fifo_errors); + seq_printf(seq, "\n"); + return 0; +} + +static const struct seq_operations yam_seqops = { + .start = yam_seq_start, + .next = yam_seq_next, + .stop = yam_seq_stop, + .show = yam_seq_show, +}; +#endif + + +/* --------------------------------------------------------------------- */ + +static int yam_open(struct net_device *dev) +{ + struct yam_port *yp = netdev_priv(dev); + enum uart u; + int i; + int ret=0; + + printk(KERN_INFO "Trying %s at iobase 0x%lx irq %u\n", dev->name, dev->base_addr, dev->irq); + + if (!yp->bitrate) + return -ENXIO; + if (!dev->base_addr || dev->base_addr > 0x1000 - YAM_EXTENT || + dev->irq < 2 || dev->irq > 15) { + return -ENXIO; + } + if (!request_region(dev->base_addr, YAM_EXTENT, dev->name)) + { + printk(KERN_ERR "%s: cannot 0x%lx busy\n", dev->name, dev->base_addr); + return -EACCES; + } + if ((u = yam_check_uart(dev->base_addr)) == c_uart_unknown) { + printk(KERN_ERR "%s: cannot find uart type\n", dev->name); + ret = -EIO; + goto out_release_base; + } + if (fpga_download(dev->base_addr, yp->bitrate)) { + printk(KERN_ERR "%s: cannot init FPGA\n", dev->name); + ret = -EIO; + goto out_release_base; + } + outb(0, IER(dev->base_addr)); + if (request_irq(dev->irq, yam_interrupt, IRQF_SHARED, dev->name, dev)) { + printk(KERN_ERR "%s: irq %d busy\n", dev->name, dev->irq); + ret = -EBUSY; + goto out_release_base; + } + + yam_set_uart(dev); + + netif_start_queue(dev); + + yp->slotcnt = yp->slot / 10; + + /* Reset overruns for all ports - FPGA programming makes overruns */ + for (i = 0; i < NR_PORTS; i++) { + struct net_device *yam_dev = yam_devs[i]; + + inb(LSR(yam_dev->base_addr)); + yam_dev->stats.rx_fifo_errors = 0; + } + + printk(KERN_INFO "%s at iobase 0x%lx irq %u uart %s\n", dev->name, dev->base_addr, dev->irq, + uart_str[u]); + return 0; + +out_release_base: + release_region(dev->base_addr, YAM_EXTENT); + return ret; +} + +/* --------------------------------------------------------------------- */ + +static int yam_close(struct net_device *dev) +{ + struct sk_buff *skb; + struct yam_port *yp = netdev_priv(dev); + + if (!dev) + return -EINVAL; + + /* + * disable interrupts + */ + outb(0, IER(dev->base_addr)); + outb(1, MCR(dev->base_addr)); + /* Remove IRQ handler if last */ + free_irq(dev->irq,dev); + release_region(dev->base_addr, YAM_EXTENT); + netif_stop_queue(dev); + while ((skb = skb_dequeue(&yp->send_queue))) + dev_kfree_skb(skb); + + printk(KERN_INFO "%s: close yam at iobase 0x%lx irq %u\n", + yam_drvname, dev->base_addr, dev->irq); + return 0; +} + +/* --------------------------------------------------------------------- */ + +static int yam_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) +{ + struct yam_port *yp = netdev_priv(dev); + struct yamdrv_ioctl_cfg yi; + struct yamdrv_ioctl_mcs *ym; + int ioctl_cmd; + + if (copy_from_user(&ioctl_cmd, ifr->ifr_data, sizeof(int))) + return -EFAULT; + + if (yp->magic != YAM_MAGIC) + return -EINVAL; + + if (!capable(CAP_NET_ADMIN)) + return -EPERM; + + if (cmd != SIOCDEVPRIVATE) + return -EINVAL; + + switch (ioctl_cmd) { + + case SIOCYAMRESERVED: + return -EINVAL; /* unused */ + + case SIOCYAMSMCS: + if (netif_running(dev)) + return -EINVAL; /* Cannot change this parameter when up */ + ym = memdup_user(ifr->ifr_data, + sizeof(struct yamdrv_ioctl_mcs)); + if (IS_ERR(ym)) + return PTR_ERR(ym); + if (ym->cmd != SIOCYAMSMCS || ym->bitrate > YAM_MAXBITRATE) { + kfree(ym); + return -EINVAL; + } + /* setting predef as 0 for loading userdefined mcs data */ + add_mcs(ym->bits, ym->bitrate, 0); + kfree(ym); + break; + + case SIOCYAMSCFG: + if (!capable(CAP_SYS_RAWIO)) + return -EPERM; + if (copy_from_user(&yi, ifr->ifr_data, sizeof(struct yamdrv_ioctl_cfg))) + return -EFAULT; + + if (yi.cmd != SIOCYAMSCFG) + return -EINVAL; + if ((yi.cfg.mask & YAM_IOBASE) && netif_running(dev)) + return -EINVAL; /* Cannot change this parameter when up */ + if ((yi.cfg.mask & YAM_IRQ) && netif_running(dev)) + return -EINVAL; /* Cannot change this parameter when up */ + if ((yi.cfg.mask & YAM_BITRATE) && netif_running(dev)) + return -EINVAL; /* Cannot change this parameter when up */ + if ((yi.cfg.mask & YAM_BAUDRATE) && netif_running(dev)) + return -EINVAL; /* Cannot change this parameter when up */ + + if (yi.cfg.mask & YAM_IOBASE) { + yp->iobase = yi.cfg.iobase; + dev->base_addr = yi.cfg.iobase; + } + if (yi.cfg.mask & YAM_IRQ) { + if (yi.cfg.irq > 15) + return -EINVAL; + yp->irq = yi.cfg.irq; + dev->irq = yi.cfg.irq; + } + if (yi.cfg.mask & YAM_BITRATE) { + if (yi.cfg.bitrate > YAM_MAXBITRATE) + return -EINVAL; + yp->bitrate = yi.cfg.bitrate; + } + if (yi.cfg.mask & YAM_BAUDRATE) { + if (yi.cfg.baudrate > YAM_MAXBAUDRATE) + return -EINVAL; + yp->baudrate = yi.cfg.baudrate; + } + if (yi.cfg.mask & YAM_MODE) { + if (yi.cfg.mode > YAM_MAXMODE) + return -EINVAL; + yp->dupmode = yi.cfg.mode; + } + if (yi.cfg.mask & YAM_HOLDDLY) { + if (yi.cfg.holddly > YAM_MAXHOLDDLY) + return -EINVAL; + yp->holdd = yi.cfg.holddly; + } + if (yi.cfg.mask & YAM_TXDELAY) { + if (yi.cfg.txdelay > YAM_MAXTXDELAY) + return -EINVAL; + yp->txd = yi.cfg.txdelay; + } + if (yi.cfg.mask & YAM_TXTAIL) { + if (yi.cfg.txtail > YAM_MAXTXTAIL) + return -EINVAL; + yp->txtail = yi.cfg.txtail; + } + if (yi.cfg.mask & YAM_PERSIST) { + if (yi.cfg.persist > YAM_MAXPERSIST) + return -EINVAL; + yp->pers = yi.cfg.persist; + } + if (yi.cfg.mask & YAM_SLOTTIME) { + if (yi.cfg.slottime > YAM_MAXSLOTTIME) + return -EINVAL; + yp->slot = yi.cfg.slottime; + yp->slotcnt = yp->slot / 10; + } + break; + + case SIOCYAMGCFG: + memset(&yi, 0, sizeof(yi)); + yi.cfg.mask = 0xffffffff; + yi.cfg.iobase = yp->iobase; + yi.cfg.irq = yp->irq; + yi.cfg.bitrate = yp->bitrate; + yi.cfg.baudrate = yp->baudrate; + yi.cfg.mode = yp->dupmode; + yi.cfg.txdelay = yp->txd; + yi.cfg.holddly = yp->holdd; + yi.cfg.txtail = yp->txtail; + yi.cfg.persist = yp->pers; + yi.cfg.slottime = yp->slot; + if (copy_to_user(ifr->ifr_data, &yi, sizeof(struct yamdrv_ioctl_cfg))) + return -EFAULT; + break; + + default: + return -EINVAL; + + } + + return 0; +} + +/* --------------------------------------------------------------------- */ + +static int yam_set_mac_address(struct net_device *dev, void *addr) +{ + struct sockaddr *sa = (struct sockaddr *) addr; + + /* addr is an AX.25 shifted ASCII mac address */ + memcpy(dev->dev_addr, sa->sa_data, dev->addr_len); + return 0; +} + +/* --------------------------------------------------------------------- */ + +static const struct net_device_ops yam_netdev_ops = { + .ndo_open = yam_open, + .ndo_stop = yam_close, + .ndo_start_xmit = yam_send_packet, + .ndo_do_ioctl = yam_ioctl, + .ndo_set_mac_address = yam_set_mac_address, +}; + +static void yam_setup(struct net_device *dev) +{ + struct yam_port *yp = netdev_priv(dev); + + yp->magic = YAM_MAGIC; + yp->bitrate = DEFAULT_BITRATE; + yp->baudrate = DEFAULT_BITRATE * 2; + yp->iobase = 0; + yp->irq = 0; + yp->dupmode = 0; + yp->holdd = DEFAULT_HOLDD; + yp->txd = DEFAULT_TXD; + yp->txtail = DEFAULT_TXTAIL; + yp->slot = DEFAULT_SLOT; + yp->pers = DEFAULT_PERS; + yp->dev = dev; + + dev->base_addr = yp->iobase; + dev->irq = yp->irq; + + skb_queue_head_init(&yp->send_queue); + + dev->netdev_ops = &yam_netdev_ops; + dev->header_ops = &ax25_header_ops; + + dev->type = ARPHRD_AX25; + dev->hard_header_len = AX25_MAX_HEADER_LEN; + dev->mtu = AX25_MTU; + dev->addr_len = AX25_ADDR_LEN; + memcpy(dev->broadcast, &ax25_bcast, AX25_ADDR_LEN); + memcpy(dev->dev_addr, &ax25_defaddr, AX25_ADDR_LEN); +} + +static int __init yam_init_driver(void) +{ + struct net_device *dev; + int i, err; + char name[IFNAMSIZ]; + + printk(yam_drvinfo); + + for (i = 0; i < NR_PORTS; i++) { + sprintf(name, "yam%d", i); + + dev = alloc_netdev(sizeof(struct yam_port), name, + NET_NAME_UNKNOWN, yam_setup); + if (!dev) { + pr_err("yam: cannot allocate net device\n"); + err = -ENOMEM; + goto error; + } + + err = register_netdev(dev); + if (err) { + printk(KERN_WARNING "yam: cannot register net device %s\n", dev->name); + free_netdev(dev); + goto error; + } + yam_devs[i] = dev; + + } + + timer_setup(&yam_timer, yam_dotimer, 0); + yam_timer.expires = jiffies + HZ / 100; + add_timer(&yam_timer); + + proc_create_seq("yam", 0444, init_net.proc_net, &yam_seqops); + return 0; + error: + while (--i >= 0) { + unregister_netdev(yam_devs[i]); + free_netdev(yam_devs[i]); + } + return err; +} + +/* --------------------------------------------------------------------- */ + +static void __exit yam_cleanup_driver(void) +{ + struct yam_mcs *p; + int i; + + del_timer_sync(&yam_timer); + for (i = 0; i < NR_PORTS; i++) { + struct net_device *dev = yam_devs[i]; + if (dev) { + unregister_netdev(dev); + free_netdev(dev); + } + } + + while (yam_data) { + p = yam_data; + yam_data = yam_data->next; + kfree(p); + } + + remove_proc_entry("yam", init_net.proc_net); +} + +/* --------------------------------------------------------------------- */ + +MODULE_AUTHOR("Frederic Rible F1OAT frible@teaser.fr"); +MODULE_DESCRIPTION("Yam amateur radio modem driver"); +MODULE_LICENSE("GPL"); +MODULE_FIRMWARE(FIRMWARE_1200); +MODULE_FIRMWARE(FIRMWARE_9600); + +module_init(yam_init_driver); +module_exit(yam_cleanup_driver); + +/* --------------------------------------------------------------------- */ + diff --git a/drivers/net/hamradio/z8530.h b/drivers/net/hamradio/z8530.h new file mode 100644 index 000000000..1655901d7 --- /dev/null +++ b/drivers/net/hamradio/z8530.h @@ -0,0 +1,246 @@ +/* SPDX-License-Identifier: GPL-2.0 */ + +/* 8530 Serial Communications Controller Register definitions */ +#define FLAG 0x7e + +/* Write Register 0 */ +#define R0 0 /* Register selects */ +#define R1 1 +#define R2 2 +#define R3 3 +#define R4 4 +#define R5 5 +#define R6 6 +#define R7 7 +#define R8 8 +#define R9 9 +#define R10 10 +#define R11 11 +#define R12 12 +#define R13 13 +#define R14 14 +#define R15 15 + +#define NULLCODE 0 /* Null Code */ +#define POINT_HIGH 0x8 /* Select upper half of registers */ +#define RES_EXT_INT 0x10 /* Reset Ext. Status Interrupts */ +#define SEND_ABORT 0x18 /* HDLC Abort */ +#define RES_RxINT_FC 0x20 /* Reset RxINT on First Character */ +#define RES_Tx_P 0x28 /* Reset TxINT Pending */ +#define ERR_RES 0x30 /* Error Reset */ +#define RES_H_IUS 0x38 /* Reset highest IUS */ + +#define RES_Rx_CRC 0x40 /* Reset Rx CRC Checker */ +#define RES_Tx_CRC 0x80 /* Reset Tx CRC Checker */ +#define RES_EOM_L 0xC0 /* Reset EOM latch */ + +/* Write Register 1 */ + +#define EXT_INT_ENAB 0x1 /* Ext Int Enable */ +#define TxINT_ENAB 0x2 /* Tx Int Enable */ +#define PAR_SPEC 0x4 /* Parity is special condition */ + +#define RxINT_DISAB 0 /* Rx Int Disable */ +#define RxINT_FCERR 0x8 /* Rx Int on First Character Only or Error */ +#define INT_ALL_Rx 0x10 /* Int on all Rx Characters or error */ +#define INT_ERR_Rx 0x18 /* Int on error only */ + +#define WT_RDY_RT 0x20 /* Wait/Ready on R/T */ +#define WT_FN_RDYFN 0x40 /* Wait/FN/Ready FN */ +#define WT_RDY_ENAB 0x80 /* Wait/Ready Enable */ + +/* Write Register #2 (Interrupt Vector) */ + +/* Write Register 3 */ + +#define RxENABLE 0x1 /* Rx Enable */ +#define SYNC_L_INH 0x2 /* Sync Character Load Inhibit */ +#define ADD_SM 0x4 /* Address Search Mode (SDLC) */ +#define RxCRC_ENAB 0x8 /* Rx CRC Enable */ +#define ENT_HM 0x10 /* Enter Hunt Mode */ +#define AUTO_ENAB 0x20 /* Auto Enables */ +#define Rx5 0x0 /* Rx 5 Bits/Character */ +#define Rx7 0x40 /* Rx 7 Bits/Character */ +#define Rx6 0x80 /* Rx 6 Bits/Character */ +#define Rx8 0xc0 /* Rx 8 Bits/Character */ + +/* Write Register 4 */ + +#define PAR_ENA 0x1 /* Parity Enable */ +#define PAR_EVEN 0x2 /* Parity Even/Odd* */ + +#define SYNC_ENAB 0 /* Sync Modes Enable */ +#define SB1 0x4 /* 1 stop bit/char */ +#define SB15 0x8 /* 1.5 stop bits/char */ +#define SB2 0xc /* 2 stop bits/char */ + +#define MONSYNC 0 /* 8 Bit Sync character */ +#define BISYNC 0x10 /* 16 bit sync character */ +#define SDLC 0x20 /* SDLC Mode (01111110 Sync Flag) */ +#define EXTSYNC 0x30 /* External Sync Mode */ + +#define X1CLK 0x0 /* x1 clock mode */ +#define X16CLK 0x40 /* x16 clock mode */ +#define X32CLK 0x80 /* x32 clock mode */ +#define X64CLK 0xC0 /* x64 clock mode */ + +/* Write Register 5 */ + +#define TxCRC_ENAB 0x1 /* Tx CRC Enable */ +#define RTS 0x2 /* RTS */ +#define SDLC_CRC 0x4 /* SDLC/CRC-16 */ +#define TxENAB 0x8 /* Tx Enable */ +#define SND_BRK 0x10 /* Send Break */ +#define Tx5 0x0 /* Tx 5 bits (or less)/character */ +#define Tx7 0x20 /* Tx 7 bits/character */ +#define Tx6 0x40 /* Tx 6 bits/character */ +#define Tx8 0x60 /* Tx 8 bits/character */ +#define DTR 0x80 /* DTR */ + +/* Write Register 6 (Sync bits 0-7/SDLC Address Field) */ + +/* Write Register 7 (Sync bits 8-15/SDLC 01111110) */ + +/* Write Register 8 (transmit buffer) */ + +/* Write Register 9 (Master interrupt control) */ +#define VIS 1 /* Vector Includes Status */ +#define NV 2 /* No Vector */ +#define DLC 4 /* Disable Lower Chain */ +#define MIE 8 /* Master Interrupt Enable */ +#define STATHI 0x10 /* Status high */ +#define NORESET 0 /* No reset on write to R9 */ +#define CHRB 0x40 /* Reset channel B */ +#define CHRA 0x80 /* Reset channel A */ +#define FHWRES 0xc0 /* Force hardware reset */ + +/* Write Register 10 (misc control bits) */ +#define BIT6 1 /* 6 bit/8bit sync */ +#define LOOPMODE 2 /* SDLC Loop mode */ +#define ABUNDER 4 /* Abort/flag on SDLC xmit underrun */ +#define MARKIDLE 8 /* Mark/flag on idle */ +#define GAOP 0x10 /* Go active on poll */ +#define NRZ 0 /* NRZ mode */ +#define NRZI 0x20 /* NRZI mode */ +#define FM1 0x40 /* FM1 (transition = 1) */ +#define FM0 0x60 /* FM0 (transition = 0) */ +#define CRCPS 0x80 /* CRC Preset I/O */ + +/* Write Register 11 (Clock Mode control) */ +#define TRxCXT 0 /* TRxC = Xtal output */ +#define TRxCTC 1 /* TRxC = Transmit clock */ +#define TRxCBR 2 /* TRxC = BR Generator Output */ +#define TRxCDP 3 /* TRxC = DPLL output */ +#define TRxCOI 4 /* TRxC O/I */ +#define TCRTxCP 0 /* Transmit clock = RTxC pin */ +#define TCTRxCP 8 /* Transmit clock = TRxC pin */ +#define TCBR 0x10 /* Transmit clock = BR Generator output */ +#define TCDPLL 0x18 /* Transmit clock = DPLL output */ +#define RCRTxCP 0 /* Receive clock = RTxC pin */ +#define RCTRxCP 0x20 /* Receive clock = TRxC pin */ +#define RCBR 0x40 /* Receive clock = BR Generator output */ +#define RCDPLL 0x60 /* Receive clock = DPLL output */ +#define RTxCX 0x80 /* RTxC Xtal/No Xtal */ + +/* Write Register 12 (lower byte of baud rate generator time constant) */ + +/* Write Register 13 (upper byte of baud rate generator time constant) */ + +/* Write Register 14 (Misc control bits) */ +#define BRENABL 1 /* Baud rate generator enable */ +#define BRSRC 2 /* Baud rate generator source */ +#define DTRREQ 4 /* DTR/Request function */ +#define AUTOECHO 8 /* Auto Echo */ +#define LOOPBAK 0x10 /* Local loopback */ +#define SEARCH 0x20 /* Enter search mode */ +#define RMC 0x40 /* Reset missing clock */ +#define DISDPLL 0x60 /* Disable DPLL */ +#define SSBR 0x80 /* Set DPLL source = BR generator */ +#define SSRTxC 0xa0 /* Set DPLL source = RTxC */ +#define SFMM 0xc0 /* Set FM mode */ +#define SNRZI 0xe0 /* Set NRZI mode */ + +/* Write Register 15 (external/status interrupt control) */ +#define ZCIE 2 /* Zero count IE */ +#define DCDIE 8 /* DCD IE */ +#define SYNCIE 0x10 /* Sync/hunt IE */ +#define CTSIE 0x20 /* CTS IE */ +#define TxUIE 0x40 /* Tx Underrun/EOM IE */ +#define BRKIE 0x80 /* Break/Abort IE */ + + +/* Read Register 0 */ +#define Rx_CH_AV 0x1 /* Rx Character Available */ +#define ZCOUNT 0x2 /* Zero count */ +#define Tx_BUF_EMP 0x4 /* Tx Buffer empty */ +#define DCD 0x8 /* DCD */ +#define SYNC_HUNT 0x10 /* Sync/hunt */ +#define CTS 0x20 /* CTS */ +#define TxEOM 0x40 /* Tx underrun */ +#define BRK_ABRT 0x80 /* Break/Abort */ + +/* Read Register 1 */ +#define ALL_SNT 0x1 /* All sent */ +/* Residue Data for 8 Rx bits/char programmed */ +#define RES3 0x8 /* 0/3 */ +#define RES4 0x4 /* 0/4 */ +#define RES5 0xc /* 0/5 */ +#define RES6 0x2 /* 0/6 */ +#define RES7 0xa /* 0/7 */ +#define RES8 0x6 /* 0/8 */ +#define RES18 0xe /* 1/8 */ +#define RES28 0x0 /* 2/8 */ +/* Special Rx Condition Interrupts */ +#define PAR_ERR 0x10 /* Parity error */ +#define Rx_OVR 0x20 /* Rx Overrun Error */ +#define CRC_ERR 0x40 /* CRC/Framing Error */ +#define END_FR 0x80 /* End of Frame (SDLC) */ + +/* Read Register 2 (channel b only) - Interrupt vector */ + +/* Read Register 3 (interrupt pending register) ch a only */ +#define CHBEXT 0x1 /* Channel B Ext/Stat IP */ +#define CHBTxIP 0x2 /* Channel B Tx IP */ +#define CHBRxIP 0x4 /* Channel B Rx IP */ +#define CHAEXT 0x8 /* Channel A Ext/Stat IP */ +#define CHATxIP 0x10 /* Channel A Tx IP */ +#define CHARxIP 0x20 /* Channel A Rx IP */ + +/* Read Register 8 (receive data register) */ + +/* Read Register 10 (misc status bits) */ +#define ONLOOP 2 /* On loop */ +#define LOOPSEND 0x10 /* Loop sending */ +#define CLK2MIS 0x40 /* Two clocks missing */ +#define CLK1MIS 0x80 /* One clock missing */ + +/* Read Register 12 (lower byte of baud rate generator constant) */ + +/* Read Register 13 (upper byte of baud rate generator constant) */ + +/* Read Register 15 (value of WR 15) */ + +/* Z85C30/Z85230 Enhanced SCC register definitions */ + +/* Write Register 7' (SDLC/HDLC Programmable Enhancements) */ +#define AUTOTXF 0x01 /* Auto Tx Flag */ +#define AUTOEOM 0x02 /* Auto EOM Latch Reset */ +#define AUTORTS 0x04 /* Auto RTS */ +#define TXDNRZI 0x08 /* TxD Pulled High in SDLC NRZI mode */ +#define RXFIFOH 0x08 /* Z85230: Int on RX FIFO half full */ +#define FASTDTR 0x10 /* Fast DTR/REQ Mode */ +#define CRCCBCR 0x20 /* CRC Check Bytes Completely Received */ +#define TXFIFOE 0x20 /* Z85230: Int on TX FIFO completely empty */ +#define EXTRDEN 0x40 /* Extended Read Enabled */ + +/* Write Register 15 (external/status interrupt control) */ +#define SHDLCE 1 /* SDLC/HDLC Enhancements Enable */ +#define FIFOE 4 /* FIFO Enable */ + +/* Read Register 6 (frame status FIFO) */ +#define BCLSB 0xff /* LSB of 14 bits count */ + +/* Read Register 7 (frame status FIFO) */ +#define BCMSB 0x3f /* MSB of 14 bits count */ +#define FDA 0x40 /* FIFO Data Available Status */ +#define FOS 0x80 /* FIFO Overflow Status */ |