diff options
Diffstat (limited to 'drivers/net/usb/qmi_wwan.c')
| -rw-r--r-- | drivers/net/usb/qmi_wwan.c | 1540 |
1 files changed, 1540 insertions, 0 deletions
diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c new file mode 100644 index 000000000..c2e872f92 --- /dev/null +++ b/drivers/net/usb/qmi_wwan.c @@ -0,0 +1,1540 @@ +/* + * Copyright (c) 2012 Bjørn Mork <bjorn@mork.no> + * + * The probing code is heavily inspired by cdc_ether, which is: + * Copyright (C) 2003-2005 by David Brownell + * Copyright (C) 2006 by Ole Andre Vadla Ravnas (ActiveSync) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + */ + +#include <linux/module.h> +#include <linux/sched/signal.h> +#include <linux/netdevice.h> +#include <linux/ethtool.h> +#include <linux/etherdevice.h> +#include <linux/if_arp.h> +#include <linux/mii.h> +#include <linux/rtnetlink.h> +#include <linux/usb.h> +#include <linux/usb/cdc.h> +#include <linux/usb/usbnet.h> +#include <linux/usb/cdc-wdm.h> +#include <linux/u64_stats_sync.h> + +/* This driver supports wwan (3G/LTE/?) devices using a vendor + * specific management protocol called Qualcomm MSM Interface (QMI) - + * in addition to the more common AT commands over serial interface + * management + * + * QMI is wrapped in CDC, using CDC encapsulated commands on the + * control ("master") interface of a two-interface CDC Union + * resembling standard CDC ECM. The devices do not use the control + * interface for any other CDC messages. Most likely because the + * management protocol is used in place of the standard CDC + * notifications NOTIFY_NETWORK_CONNECTION and NOTIFY_SPEED_CHANGE + * + * Alternatively, control and data functions can be combined in a + * single USB interface. + * + * Handling a protocol like QMI is out of the scope for any driver. + * It is exported as a character device using the cdc-wdm driver as + * a subdriver, enabling userspace applications ("modem managers") to + * handle it. + * + * These devices may alternatively/additionally be configured using AT + * commands on a serial interface + */ + +/* driver specific data */ +struct qmi_wwan_state { + struct usb_driver *subdriver; + atomic_t pmcount; + unsigned long flags; + struct usb_interface *control; + struct usb_interface *data; +}; + +enum qmi_wwan_flags { + QMI_WWAN_FLAG_RAWIP = 1 << 0, + QMI_WWAN_FLAG_MUX = 1 << 1, +}; + +enum qmi_wwan_quirks { + QMI_WWAN_QUIRK_DTR = 1 << 0, /* needs "set DTR" request */ +}; + +struct qmimux_hdr { + u8 pad; + u8 mux_id; + __be16 pkt_len; +}; + +struct qmimux_priv { + struct net_device *real_dev; + u8 mux_id; + struct pcpu_sw_netstats __percpu *stats64; +}; + +static int qmimux_open(struct net_device *dev) +{ + struct qmimux_priv *priv = netdev_priv(dev); + struct net_device *real_dev = priv->real_dev; + + if (!(priv->real_dev->flags & IFF_UP)) + return -ENETDOWN; + + if (netif_carrier_ok(real_dev)) + netif_carrier_on(dev); + return 0; +} + +static int qmimux_stop(struct net_device *dev) +{ + netif_carrier_off(dev); + return 0; +} + +static netdev_tx_t qmimux_start_xmit(struct sk_buff *skb, struct net_device *dev) +{ + struct qmimux_priv *priv = netdev_priv(dev); + unsigned int len = skb->len; + struct qmimux_hdr *hdr; + netdev_tx_t ret; + + hdr = skb_push(skb, sizeof(struct qmimux_hdr)); + hdr->pad = 0; + hdr->mux_id = priv->mux_id; + hdr->pkt_len = cpu_to_be16(len); + skb->dev = priv->real_dev; + ret = dev_queue_xmit(skb); + + if (likely(ret == NET_XMIT_SUCCESS || ret == NET_XMIT_CN)) { + struct pcpu_sw_netstats *stats64 = this_cpu_ptr(priv->stats64); + + u64_stats_update_begin(&stats64->syncp); + stats64->tx_packets++; + stats64->tx_bytes += len; + u64_stats_update_end(&stats64->syncp); + } else { + dev->stats.tx_dropped++; + } + + return ret; +} + +static void qmimux_get_stats64(struct net_device *net, + struct rtnl_link_stats64 *stats) +{ + struct qmimux_priv *priv = netdev_priv(net); + unsigned int start; + int cpu; + + netdev_stats_to_stats64(stats, &net->stats); + + for_each_possible_cpu(cpu) { + struct pcpu_sw_netstats *stats64; + u64 rx_packets, rx_bytes; + u64 tx_packets, tx_bytes; + + stats64 = per_cpu_ptr(priv->stats64, cpu); + + do { + start = u64_stats_fetch_begin_irq(&stats64->syncp); + rx_packets = stats64->rx_packets; + rx_bytes = stats64->rx_bytes; + tx_packets = stats64->tx_packets; + tx_bytes = stats64->tx_bytes; + } while (u64_stats_fetch_retry_irq(&stats64->syncp, start)); + + stats->rx_packets += rx_packets; + stats->rx_bytes += rx_bytes; + stats->tx_packets += tx_packets; + stats->tx_bytes += tx_bytes; + } +} + +static const struct net_device_ops qmimux_netdev_ops = { + .ndo_open = qmimux_open, + .ndo_stop = qmimux_stop, + .ndo_start_xmit = qmimux_start_xmit, + .ndo_get_stats64 = qmimux_get_stats64, +}; + +static void qmimux_setup(struct net_device *dev) +{ + dev->header_ops = NULL; /* No header */ + dev->type = ARPHRD_NONE; + dev->hard_header_len = 0; + dev->addr_len = 0; + dev->flags = IFF_POINTOPOINT | IFF_NOARP | IFF_MULTICAST; + dev->netdev_ops = &qmimux_netdev_ops; + dev->mtu = 1500; + dev->needs_free_netdev = true; +} + +static struct net_device *qmimux_find_dev(struct usbnet *dev, u8 mux_id) +{ + struct qmimux_priv *priv; + struct list_head *iter; + struct net_device *ldev; + + rcu_read_lock(); + netdev_for_each_upper_dev_rcu(dev->net, ldev, iter) { + priv = netdev_priv(ldev); + if (priv->mux_id == mux_id) { + rcu_read_unlock(); + return ldev; + } + } + rcu_read_unlock(); + return NULL; +} + +static bool qmimux_has_slaves(struct usbnet *dev) +{ + return !list_empty(&dev->net->adj_list.upper); +} + +static int qmimux_rx_fixup(struct usbnet *dev, struct sk_buff *skb) +{ + unsigned int len, offset = 0, pad_len, pkt_len; + struct qmimux_hdr *hdr; + struct net_device *net; + struct sk_buff *skbn; + u8 qmimux_hdr_sz = sizeof(*hdr); + + while (offset + qmimux_hdr_sz < skb->len) { + hdr = (struct qmimux_hdr *)(skb->data + offset); + len = be16_to_cpu(hdr->pkt_len); + + /* drop the packet, bogus length */ + if (offset + len + qmimux_hdr_sz > skb->len) + return 0; + + /* control packet, we do not know what to do */ + if (hdr->pad & 0x80) + goto skip; + + /* extract padding length and check for valid length info */ + pad_len = hdr->pad & 0x3f; + if (len == 0 || pad_len >= len) + goto skip; + pkt_len = len - pad_len; + + net = qmimux_find_dev(dev, hdr->mux_id); + if (!net) + goto skip; + skbn = netdev_alloc_skb(net, pkt_len); + if (!skbn) + return 0; + skbn->dev = net; + + switch (skb->data[offset + qmimux_hdr_sz] & 0xf0) { + case 0x40: + skbn->protocol = htons(ETH_P_IP); + break; + case 0x60: + skbn->protocol = htons(ETH_P_IPV6); + break; + default: + /* not ip - do not know what to do */ + goto skip; + } + + skb_put_data(skbn, skb->data + offset + qmimux_hdr_sz, pkt_len); + if (netif_rx(skbn) != NET_RX_SUCCESS) { + net->stats.rx_errors++; + return 0; + } else { + struct pcpu_sw_netstats *stats64; + struct qmimux_priv *priv = netdev_priv(net); + + stats64 = this_cpu_ptr(priv->stats64); + u64_stats_update_begin(&stats64->syncp); + stats64->rx_packets++; + stats64->rx_bytes += pkt_len; + u64_stats_update_end(&stats64->syncp); + } + +skip: + offset += len + qmimux_hdr_sz; + } + return 1; +} + +static int qmimux_register_device(struct net_device *real_dev, u8 mux_id) +{ + struct net_device *new_dev; + struct qmimux_priv *priv; + int err; + + new_dev = alloc_netdev(sizeof(struct qmimux_priv), + "qmimux%d", NET_NAME_UNKNOWN, qmimux_setup); + if (!new_dev) + return -ENOBUFS; + + dev_net_set(new_dev, dev_net(real_dev)); + priv = netdev_priv(new_dev); + priv->mux_id = mux_id; + priv->real_dev = real_dev; + + priv->stats64 = netdev_alloc_pcpu_stats(struct pcpu_sw_netstats); + if (!priv->stats64) { + err = -ENOBUFS; + goto out_free_newdev; + } + + err = register_netdevice(new_dev); + if (err < 0) + goto out_free_newdev; + + /* Account for reference in struct qmimux_priv_priv */ + dev_hold(real_dev); + + err = netdev_upper_dev_link(real_dev, new_dev, NULL); + if (err) + goto out_unregister_netdev; + + netif_stacked_transfer_operstate(real_dev, new_dev); + + return 0; + +out_unregister_netdev: + unregister_netdevice(new_dev); + dev_put(real_dev); + +out_free_newdev: + free_netdev(new_dev); + return err; +} + +static void qmimux_unregister_device(struct net_device *dev, + struct list_head *head) +{ + struct qmimux_priv *priv = netdev_priv(dev); + struct net_device *real_dev = priv->real_dev; + + free_percpu(priv->stats64); + netdev_upper_dev_unlink(real_dev, dev); + unregister_netdevice_queue(dev, head); + + /* Get rid of the reference to real_dev */ + dev_put(real_dev); +} + +static void qmi_wwan_netdev_setup(struct net_device *net) +{ + struct usbnet *dev = netdev_priv(net); + struct qmi_wwan_state *info = (void *)&dev->data; + + if (info->flags & QMI_WWAN_FLAG_RAWIP) { + net->header_ops = NULL; /* No header */ + net->type = ARPHRD_NONE; + net->hard_header_len = 0; + net->addr_len = 0; + net->flags = IFF_POINTOPOINT | IFF_NOARP | IFF_MULTICAST; + set_bit(EVENT_NO_IP_ALIGN, &dev->flags); + netdev_dbg(net, "mode: raw IP\n"); + } else if (!net->header_ops) { /* don't bother if already set */ + ether_setup(net); + /* Restoring min/max mtu values set originally by usbnet */ + net->min_mtu = 0; + net->max_mtu = ETH_MAX_MTU; + clear_bit(EVENT_NO_IP_ALIGN, &dev->flags); + netdev_dbg(net, "mode: Ethernet\n"); + } + + /* recalculate buffers after changing hard_header_len */ + usbnet_change_mtu(net, net->mtu); +} + +static ssize_t raw_ip_show(struct device *d, struct device_attribute *attr, char *buf) +{ + struct usbnet *dev = netdev_priv(to_net_dev(d)); + struct qmi_wwan_state *info = (void *)&dev->data; + + return sprintf(buf, "%c\n", info->flags & QMI_WWAN_FLAG_RAWIP ? 'Y' : 'N'); +} + +static ssize_t raw_ip_store(struct device *d, struct device_attribute *attr, const char *buf, size_t len) +{ + struct usbnet *dev = netdev_priv(to_net_dev(d)); + struct qmi_wwan_state *info = (void *)&dev->data; + bool enable; + int ret; + + if (strtobool(buf, &enable)) + return -EINVAL; + + /* no change? */ + if (enable == (info->flags & QMI_WWAN_FLAG_RAWIP)) + return len; + + if (!rtnl_trylock()) + return restart_syscall(); + + /* we don't want to modify a running netdev */ + if (netif_running(dev->net)) { + netdev_err(dev->net, "Cannot change a running device\n"); + ret = -EBUSY; + goto err; + } + + /* let other drivers deny the change */ + ret = call_netdevice_notifiers(NETDEV_PRE_TYPE_CHANGE, dev->net); + ret = notifier_to_errno(ret); + if (ret) { + netdev_err(dev->net, "Type change was refused\n"); + goto err; + } + + if (enable) + info->flags |= QMI_WWAN_FLAG_RAWIP; + else + info->flags &= ~QMI_WWAN_FLAG_RAWIP; + qmi_wwan_netdev_setup(dev->net); + call_netdevice_notifiers(NETDEV_POST_TYPE_CHANGE, dev->net); + ret = len; +err: + rtnl_unlock(); + return ret; +} + +static ssize_t add_mux_show(struct device *d, struct device_attribute *attr, char *buf) +{ + struct net_device *dev = to_net_dev(d); + struct qmimux_priv *priv; + struct list_head *iter; + struct net_device *ldev; + ssize_t count = 0; + + rcu_read_lock(); + netdev_for_each_upper_dev_rcu(dev, ldev, iter) { + priv = netdev_priv(ldev); + count += scnprintf(&buf[count], PAGE_SIZE - count, + "0x%02x\n", priv->mux_id); + } + rcu_read_unlock(); + return count; +} + +static ssize_t add_mux_store(struct device *d, struct device_attribute *attr, const char *buf, size_t len) +{ + struct usbnet *dev = netdev_priv(to_net_dev(d)); + struct qmi_wwan_state *info = (void *)&dev->data; + u8 mux_id; + int ret; + + if (kstrtou8(buf, 0, &mux_id)) + return -EINVAL; + + /* mux_id [1 - 254] for compatibility with ip(8) and the rmnet driver */ + if (mux_id < 1 || mux_id > 254) + return -EINVAL; + + if (!rtnl_trylock()) + return restart_syscall(); + + if (qmimux_find_dev(dev, mux_id)) { + netdev_err(dev->net, "mux_id already present\n"); + ret = -EINVAL; + goto err; + } + + ret = qmimux_register_device(dev->net, mux_id); + if (!ret) { + info->flags |= QMI_WWAN_FLAG_MUX; + ret = len; + } +err: + rtnl_unlock(); + return ret; +} + +static ssize_t del_mux_show(struct device *d, struct device_attribute *attr, char *buf) +{ + return add_mux_show(d, attr, buf); +} + +static ssize_t del_mux_store(struct device *d, struct device_attribute *attr, const char *buf, size_t len) +{ + struct usbnet *dev = netdev_priv(to_net_dev(d)); + struct qmi_wwan_state *info = (void *)&dev->data; + struct net_device *del_dev; + u8 mux_id; + int ret = 0; + + if (kstrtou8(buf, 0, &mux_id)) + return -EINVAL; + + if (!rtnl_trylock()) + return restart_syscall(); + + del_dev = qmimux_find_dev(dev, mux_id); + if (!del_dev) { + netdev_err(dev->net, "mux_id not present\n"); + ret = -EINVAL; + goto err; + } + qmimux_unregister_device(del_dev, NULL); + + if (!qmimux_has_slaves(dev)) + info->flags &= ~QMI_WWAN_FLAG_MUX; + ret = len; +err: + rtnl_unlock(); + return ret; +} + +static DEVICE_ATTR_RW(raw_ip); +static DEVICE_ATTR_RW(add_mux); +static DEVICE_ATTR_RW(del_mux); + +static struct attribute *qmi_wwan_sysfs_attrs[] = { + &dev_attr_raw_ip.attr, + &dev_attr_add_mux.attr, + &dev_attr_del_mux.attr, + NULL, +}; + +static struct attribute_group qmi_wwan_sysfs_attr_group = { + .name = "qmi", + .attrs = qmi_wwan_sysfs_attrs, +}; + +/* default ethernet address used by the modem */ +static const u8 default_modem_addr[ETH_ALEN] = {0x02, 0x50, 0xf3}; + +static const u8 buggy_fw_addr[ETH_ALEN] = {0x00, 0xa0, 0xc6, 0x00, 0x00, 0x00}; + +/* Make up an ethernet header if the packet doesn't have one. + * + * A firmware bug common among several devices cause them to send raw + * IP packets under some circumstances. There is no way for the + * driver/host to know when this will happen. And even when the bug + * hits, some packets will still arrive with an intact header. + * + * The supported devices are only capably of sending IPv4, IPv6 and + * ARP packets on a point-to-point link. Any packet with an ethernet + * header will have either our address or a broadcast/multicast + * address as destination. ARP packets will always have a header. + * + * This means that this function will reliably add the appropriate + * header iff necessary, provided our hardware address does not start + * with 4 or 6. + * + * Another common firmware bug results in all packets being addressed + * to 00:a0:c6:00:00:00 despite the host address being different. + * This function will also fixup such packets. + */ +static int qmi_wwan_rx_fixup(struct usbnet *dev, struct sk_buff *skb) +{ + struct qmi_wwan_state *info = (void *)&dev->data; + bool rawip = info->flags & QMI_WWAN_FLAG_RAWIP; + __be16 proto; + + /* This check is no longer done by usbnet */ + if (skb->len < dev->net->hard_header_len) + return 0; + + if (info->flags & QMI_WWAN_FLAG_MUX) + return qmimux_rx_fixup(dev, skb); + + switch (skb->data[0] & 0xf0) { + case 0x40: + proto = htons(ETH_P_IP); + break; + case 0x60: + proto = htons(ETH_P_IPV6); + break; + case 0x00: + if (rawip) + return 0; + if (is_multicast_ether_addr(skb->data)) + return 1; + /* possibly bogus destination - rewrite just in case */ + skb_reset_mac_header(skb); + goto fix_dest; + default: + if (rawip) + return 0; + /* pass along other packets without modifications */ + return 1; + } + if (rawip) { + skb_reset_mac_header(skb); + skb->dev = dev->net; /* normally set by eth_type_trans */ + skb->protocol = proto; + return 1; + } + + if (skb_headroom(skb) < ETH_HLEN) + return 0; + skb_push(skb, ETH_HLEN); + skb_reset_mac_header(skb); + eth_hdr(skb)->h_proto = proto; + eth_zero_addr(eth_hdr(skb)->h_source); +fix_dest: + memcpy(eth_hdr(skb)->h_dest, dev->net->dev_addr, ETH_ALEN); + return 1; +} + +/* very simplistic detection of IPv4 or IPv6 headers */ +static bool possibly_iphdr(const char *data) +{ + return (data[0] & 0xd0) == 0x40; +} + +/* disallow addresses which may be confused with IP headers */ +static int qmi_wwan_mac_addr(struct net_device *dev, void *p) +{ + int ret; + struct sockaddr *addr = p; + + ret = eth_prepare_mac_addr_change(dev, p); + if (ret < 0) + return ret; + if (possibly_iphdr(addr->sa_data)) + return -EADDRNOTAVAIL; + eth_commit_mac_addr_change(dev, p); + return 0; +} + +static const struct net_device_ops qmi_wwan_netdev_ops = { + .ndo_open = usbnet_open, + .ndo_stop = usbnet_stop, + .ndo_start_xmit = usbnet_start_xmit, + .ndo_tx_timeout = usbnet_tx_timeout, + .ndo_change_mtu = usbnet_change_mtu, + .ndo_get_stats64 = usbnet_get_stats64, + .ndo_set_mac_address = qmi_wwan_mac_addr, + .ndo_validate_addr = eth_validate_addr, +}; + +/* using a counter to merge subdriver requests with our own into a + * combined state + */ +static int qmi_wwan_manage_power(struct usbnet *dev, int on) +{ + struct qmi_wwan_state *info = (void *)&dev->data; + int rv; + + dev_dbg(&dev->intf->dev, "%s() pmcount=%d, on=%d\n", __func__, + atomic_read(&info->pmcount), on); + + if ((on && atomic_add_return(1, &info->pmcount) == 1) || + (!on && atomic_dec_and_test(&info->pmcount))) { + /* need autopm_get/put here to ensure the usbcore sees + * the new value + */ + rv = usb_autopm_get_interface(dev->intf); + dev->intf->needs_remote_wakeup = on; + if (!rv) + usb_autopm_put_interface(dev->intf); + } + return 0; +} + +static int qmi_wwan_cdc_wdm_manage_power(struct usb_interface *intf, int on) +{ + struct usbnet *dev = usb_get_intfdata(intf); + + /* can be called while disconnecting */ + if (!dev) + return 0; + return qmi_wwan_manage_power(dev, on); +} + +/* collect all three endpoints and register subdriver */ +static int qmi_wwan_register_subdriver(struct usbnet *dev) +{ + int rv; + struct usb_driver *subdriver = NULL; + struct qmi_wwan_state *info = (void *)&dev->data; + + /* collect bulk endpoints */ + rv = usbnet_get_endpoints(dev, info->data); + if (rv < 0) + goto err; + + /* update status endpoint if separate control interface */ + if (info->control != info->data) + dev->status = &info->control->cur_altsetting->endpoint[0]; + + /* require interrupt endpoint for subdriver */ + if (!dev->status) { + rv = -EINVAL; + goto err; + } + + /* for subdriver power management */ + atomic_set(&info->pmcount, 0); + + /* register subdriver */ + subdriver = usb_cdc_wdm_register(info->control, &dev->status->desc, + 4096, &qmi_wwan_cdc_wdm_manage_power); + if (IS_ERR(subdriver)) { + dev_err(&info->control->dev, "subdriver registration failed\n"); + rv = PTR_ERR(subdriver); + goto err; + } + + /* prevent usbnet from using status endpoint */ + dev->status = NULL; + + /* save subdriver struct for suspend/resume wrappers */ + info->subdriver = subdriver; + +err: + return rv; +} + +/* Send CDC SetControlLineState request, setting or clearing the DTR. + * "Required for Autoconnect and 9x30 to wake up" according to the + * GobiNet driver. The requirement has been verified on an MDM9230 + * based Sierra Wireless MC7455 + */ +static int qmi_wwan_change_dtr(struct usbnet *dev, bool on) +{ + u8 intf = dev->intf->cur_altsetting->desc.bInterfaceNumber; + + return usbnet_write_cmd(dev, USB_CDC_REQ_SET_CONTROL_LINE_STATE, + USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE, + on ? 0x01 : 0x00, intf, NULL, 0); +} + +static int qmi_wwan_bind(struct usbnet *dev, struct usb_interface *intf) +{ + int status = -1; + u8 *buf = intf->cur_altsetting->extra; + int len = intf->cur_altsetting->extralen; + struct usb_interface_descriptor *desc = &intf->cur_altsetting->desc; + struct usb_cdc_union_desc *cdc_union; + struct usb_cdc_ether_desc *cdc_ether; + struct usb_driver *driver = driver_of(intf); + struct qmi_wwan_state *info = (void *)&dev->data; + struct usb_cdc_parsed_header hdr; + + BUILD_BUG_ON((sizeof(((struct usbnet *)0)->data) < + sizeof(struct qmi_wwan_state))); + + /* set up initial state */ + info->control = intf; + info->data = intf; + + /* and a number of CDC descriptors */ + cdc_parse_cdc_header(&hdr, intf, buf, len); + cdc_union = hdr.usb_cdc_union_desc; + cdc_ether = hdr.usb_cdc_ether_desc; + + /* Use separate control and data interfaces if we found a CDC Union */ + if (cdc_union) { + info->data = usb_ifnum_to_if(dev->udev, + cdc_union->bSlaveInterface0); + if (desc->bInterfaceNumber != cdc_union->bMasterInterface0 || + !info->data) { + dev_err(&intf->dev, + "bogus CDC Union: master=%u, slave=%u\n", + cdc_union->bMasterInterface0, + cdc_union->bSlaveInterface0); + + /* ignore and continue... */ + cdc_union = NULL; + info->data = intf; + } + } + + /* errors aren't fatal - we can live with the dynamic address */ + if (cdc_ether && cdc_ether->wMaxSegmentSize) { + dev->hard_mtu = le16_to_cpu(cdc_ether->wMaxSegmentSize); + usbnet_get_ethernet_addr(dev, cdc_ether->iMACAddress); + } + + /* claim data interface and set it up */ + if (info->control != info->data) { + status = usb_driver_claim_interface(driver, info->data, dev); + if (status < 0) + goto err; + } + + status = qmi_wwan_register_subdriver(dev); + if (status < 0 && info->control != info->data) { + usb_set_intfdata(info->data, NULL); + usb_driver_release_interface(driver, info->data); + } + + /* disabling remote wakeup on MDM9x30 devices has the same + * effect as clearing DTR. The device will not respond to QMI + * requests until we set DTR again. This is similar to a + * QMI_CTL SYNC request, clearing a lot of firmware state + * including the client ID allocations. + * + * Our usage model allows a session to span multiple + * open/close events, so we must prevent the firmware from + * clearing out state the clients might need. + * + * MDM9x30 is the first QMI chipset with USB3 support. Abuse + * this fact to enable the quirk for all USB3 devices. + * + * There are also chipsets with the same "set DTR" requirement + * but without USB3 support. Devices based on these chips + * need a quirk flag in the device ID table. + */ + if (dev->driver_info->data & QMI_WWAN_QUIRK_DTR || + le16_to_cpu(dev->udev->descriptor.bcdUSB) >= 0x0201) { + qmi_wwan_manage_power(dev, 1); + qmi_wwan_change_dtr(dev, true); + } + + /* Never use the same address on both ends of the link, even if the + * buggy firmware told us to. Or, if device is assigned the well-known + * buggy firmware MAC address, replace it with a random address, + */ + if (ether_addr_equal(dev->net->dev_addr, default_modem_addr) || + ether_addr_equal(dev->net->dev_addr, buggy_fw_addr)) + eth_hw_addr_random(dev->net); + + /* make MAC addr easily distinguishable from an IP header */ + if (possibly_iphdr(dev->net->dev_addr)) { + dev->net->dev_addr[0] |= 0x02; /* set local assignment bit */ + dev->net->dev_addr[0] &= 0xbf; /* clear "IP" bit */ + } + dev->net->netdev_ops = &qmi_wwan_netdev_ops; + dev->net->sysfs_groups[0] = &qmi_wwan_sysfs_attr_group; +err: + return status; +} + +static void qmi_wwan_unbind(struct usbnet *dev, struct usb_interface *intf) +{ + struct qmi_wwan_state *info = (void *)&dev->data; + struct usb_driver *driver = driver_of(intf); + struct usb_interface *other; + + if (info->subdriver && info->subdriver->disconnect) + info->subdriver->disconnect(info->control); + + /* disable MDM9x30 quirk */ + if (le16_to_cpu(dev->udev->descriptor.bcdUSB) >= 0x0201) { + qmi_wwan_change_dtr(dev, false); + qmi_wwan_manage_power(dev, 0); + } + + /* allow user to unbind using either control or data */ + if (intf == info->control) + other = info->data; + else + other = info->control; + + /* only if not shared */ + if (other && intf != other) { + usb_set_intfdata(other, NULL); + usb_driver_release_interface(driver, other); + } + + info->subdriver = NULL; + info->data = NULL; + info->control = NULL; +} + +/* suspend/resume wrappers calling both usbnet and the cdc-wdm + * subdriver if present. + * + * NOTE: cdc-wdm also supports pre/post_reset, but we cannot provide + * wrappers for those without adding usbnet reset support first. + */ +static int qmi_wwan_suspend(struct usb_interface *intf, pm_message_t message) +{ + struct usbnet *dev = usb_get_intfdata(intf); + struct qmi_wwan_state *info = (void *)&dev->data; + int ret; + + /* Both usbnet_suspend() and subdriver->suspend() MUST return 0 + * in system sleep context, otherwise, the resume callback has + * to recover device from previous suspend failure. + */ + ret = usbnet_suspend(intf, message); + if (ret < 0) + goto err; + + if (intf == info->control && info->subdriver && + info->subdriver->suspend) + ret = info->subdriver->suspend(intf, message); + if (ret < 0) + usbnet_resume(intf); +err: + return ret; +} + +static int qmi_wwan_resume(struct usb_interface *intf) +{ + struct usbnet *dev = usb_get_intfdata(intf); + struct qmi_wwan_state *info = (void *)&dev->data; + int ret = 0; + bool callsub = (intf == info->control && info->subdriver && + info->subdriver->resume); + + if (callsub) + ret = info->subdriver->resume(intf); + if (ret < 0) + goto err; + ret = usbnet_resume(intf); + if (ret < 0 && callsub) + info->subdriver->suspend(intf, PMSG_SUSPEND); +err: + return ret; +} + +static const struct driver_info qmi_wwan_info = { + .description = "WWAN/QMI device", + .flags = FLAG_WWAN | FLAG_SEND_ZLP, + .bind = qmi_wwan_bind, + .unbind = qmi_wwan_unbind, + .manage_power = qmi_wwan_manage_power, + .rx_fixup = qmi_wwan_rx_fixup, +}; + +static const struct driver_info qmi_wwan_info_quirk_dtr = { + .description = "WWAN/QMI device", + .flags = FLAG_WWAN | FLAG_SEND_ZLP, + .bind = qmi_wwan_bind, + .unbind = qmi_wwan_unbind, + .manage_power = qmi_wwan_manage_power, + .rx_fixup = qmi_wwan_rx_fixup, + .data = QMI_WWAN_QUIRK_DTR, +}; + +#define HUAWEI_VENDOR_ID 0x12D1 + +/* map QMI/wwan function by a fixed interface number */ +#define QMI_FIXED_INTF(vend, prod, num) \ + USB_DEVICE_INTERFACE_NUMBER(vend, prod, num), \ + .driver_info = (unsigned long)&qmi_wwan_info + +/* devices requiring "set DTR" quirk */ +#define QMI_QUIRK_SET_DTR(vend, prod, num) \ + USB_DEVICE_INTERFACE_NUMBER(vend, prod, num), \ + .driver_info = (unsigned long)&qmi_wwan_info_quirk_dtr + +/* Gobi 1000 QMI/wwan interface number is 3 according to qcserial */ +#define QMI_GOBI1K_DEVICE(vend, prod) \ + QMI_FIXED_INTF(vend, prod, 3) + +/* Gobi 2000/3000 QMI/wwan interface number is 0 according to qcserial */ +#define QMI_GOBI_DEVICE(vend, prod) \ + QMI_FIXED_INTF(vend, prod, 0) + +/* Many devices have QMI and DIAG functions which are distinguishable + * from other vendor specific functions by class, subclass and + * protocol all being 0xff. The DIAG function has exactly 2 endpoints + * and is silently rejected when probed. + * + * This makes it possible to match dynamically numbered QMI functions + * as seen on e.g. many Quectel modems. + */ +#define QMI_MATCH_FF_FF_FF(vend, prod) \ + USB_DEVICE_AND_INTERFACE_INFO(vend, prod, USB_CLASS_VENDOR_SPEC, \ + USB_SUBCLASS_VENDOR_SPEC, 0xff), \ + .driver_info = (unsigned long)&qmi_wwan_info_quirk_dtr + +static const struct usb_device_id products[] = { + /* 1. CDC ECM like devices match on the control interface */ + { /* Huawei E392, E398 and possibly others sharing both device id and more... */ + USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, USB_CLASS_VENDOR_SPEC, 1, 9), + .driver_info = (unsigned long)&qmi_wwan_info, + }, + { /* Vodafone/Huawei K5005 (12d1:14c8) and similar modems */ + USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, USB_CLASS_VENDOR_SPEC, 1, 57), + .driver_info = (unsigned long)&qmi_wwan_info, + }, + { /* HUAWEI_INTERFACE_NDIS_CONTROL_QUALCOMM */ + USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, USB_CLASS_VENDOR_SPEC, 0x01, 0x69), + .driver_info = (unsigned long)&qmi_wwan_info, + }, + { /* Motorola Mapphone devices with MDM6600 */ + USB_VENDOR_AND_INTERFACE_INFO(0x22b8, USB_CLASS_VENDOR_SPEC, 0xfb, 0xff), + .driver_info = (unsigned long)&qmi_wwan_info, + }, + + /* 2. Combined interface devices matching on class+protocol */ + { /* Huawei E367 and possibly others in "Windows mode" */ + USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, USB_CLASS_VENDOR_SPEC, 1, 7), + .driver_info = (unsigned long)&qmi_wwan_info, + }, + { /* Huawei E392, E398 and possibly others in "Windows mode" */ + USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, USB_CLASS_VENDOR_SPEC, 1, 17), + .driver_info = (unsigned long)&qmi_wwan_info, + }, + { /* HUAWEI_NDIS_SINGLE_INTERFACE_VDF */ + USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, USB_CLASS_VENDOR_SPEC, 0x01, 0x37), + .driver_info = (unsigned long)&qmi_wwan_info, + }, + { /* HUAWEI_INTERFACE_NDIS_HW_QUALCOMM */ + USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, USB_CLASS_VENDOR_SPEC, 0x01, 0x67), + .driver_info = (unsigned long)&qmi_wwan_info, + }, + { /* Pantech UML290, P4200 and more */ + USB_VENDOR_AND_INTERFACE_INFO(0x106c, USB_CLASS_VENDOR_SPEC, 0xf0, 0xff), + .driver_info = (unsigned long)&qmi_wwan_info, + }, + { /* Pantech UML290 - newer firmware */ + USB_VENDOR_AND_INTERFACE_INFO(0x106c, USB_CLASS_VENDOR_SPEC, 0xf1, 0xff), + .driver_info = (unsigned long)&qmi_wwan_info, + }, + { /* Novatel USB551L and MC551 */ + USB_DEVICE_AND_INTERFACE_INFO(0x1410, 0xb001, + USB_CLASS_COMM, + USB_CDC_SUBCLASS_ETHERNET, + USB_CDC_PROTO_NONE), + .driver_info = (unsigned long)&qmi_wwan_info, + }, + { /* Novatel E362 */ + USB_DEVICE_AND_INTERFACE_INFO(0x1410, 0x9010, + USB_CLASS_COMM, + USB_CDC_SUBCLASS_ETHERNET, + USB_CDC_PROTO_NONE), + .driver_info = (unsigned long)&qmi_wwan_info, + }, + { /* Novatel Expedite E371 */ + USB_DEVICE_AND_INTERFACE_INFO(0x1410, 0x9011, + USB_CLASS_COMM, + USB_CDC_SUBCLASS_ETHERNET, + USB_CDC_PROTO_NONE), + .driver_info = (unsigned long)&qmi_wwan_info, + }, + { /* Dell Wireless 5800 (Novatel E362) */ + USB_DEVICE_AND_INTERFACE_INFO(0x413C, 0x8195, + USB_CLASS_COMM, + USB_CDC_SUBCLASS_ETHERNET, + USB_CDC_PROTO_NONE), + .driver_info = (unsigned long)&qmi_wwan_info, + }, + { /* Dell Wireless 5800 V2 (Novatel E362) */ + USB_DEVICE_AND_INTERFACE_INFO(0x413C, 0x8196, + USB_CLASS_COMM, + USB_CDC_SUBCLASS_ETHERNET, + USB_CDC_PROTO_NONE), + .driver_info = (unsigned long)&qmi_wwan_info, + }, + { /* Dell Wireless 5804 (Novatel E371) */ + USB_DEVICE_AND_INTERFACE_INFO(0x413C, 0x819b, + USB_CLASS_COMM, + USB_CDC_SUBCLASS_ETHERNET, + USB_CDC_PROTO_NONE), + .driver_info = (unsigned long)&qmi_wwan_info, + }, + { /* ADU960S */ + USB_DEVICE_AND_INTERFACE_INFO(0x16d5, 0x650a, + USB_CLASS_COMM, + USB_CDC_SUBCLASS_ETHERNET, + USB_CDC_PROTO_NONE), + .driver_info = (unsigned long)&qmi_wwan_info, + }, + { /* HP lt2523 (Novatel E371) */ + USB_DEVICE_AND_INTERFACE_INFO(0x03f0, 0x421d, + USB_CLASS_COMM, + USB_CDC_SUBCLASS_ETHERNET, + USB_CDC_PROTO_NONE), + .driver_info = (unsigned long)&qmi_wwan_info, + }, + { /* HP lt4112 LTE/HSPA+ Gobi 4G Module (Huawei me906e) */ + USB_DEVICE_AND_INTERFACE_INFO(0x03f0, 0x581d, USB_CLASS_VENDOR_SPEC, 1, 7), + .driver_info = (unsigned long)&qmi_wwan_info, + }, + {QMI_MATCH_FF_FF_FF(0x2c7c, 0x0125)}, /* Quectel EC25, EC20 R2.0 Mini PCIe */ + {QMI_MATCH_FF_FF_FF(0x2c7c, 0x0306)}, /* Quectel EP06/EG06/EM06 */ + {QMI_MATCH_FF_FF_FF(0x2c7c, 0x0512)}, /* Quectel EG12/EM12 */ + {QMI_MATCH_FF_FF_FF(0x2c7c, 0x0620)}, /* Quectel EM160R-GL */ + {QMI_MATCH_FF_FF_FF(0x2c7c, 0x0800)}, /* Quectel RM500Q-GL */ + + /* 3. Combined interface devices matching on interface number */ + {QMI_FIXED_INTF(0x0408, 0xea42, 4)}, /* Yota / Megafon M100-1 */ + {QMI_FIXED_INTF(0x05c6, 0x6001, 3)}, /* 4G LTE usb-modem U901 */ + {QMI_FIXED_INTF(0x05c6, 0x7000, 0)}, + {QMI_FIXED_INTF(0x05c6, 0x7001, 1)}, + {QMI_FIXED_INTF(0x05c6, 0x7002, 1)}, + {QMI_FIXED_INTF(0x05c6, 0x7101, 1)}, + {QMI_FIXED_INTF(0x05c6, 0x7101, 2)}, + {QMI_FIXED_INTF(0x05c6, 0x7101, 3)}, + {QMI_FIXED_INTF(0x05c6, 0x7102, 1)}, + {QMI_FIXED_INTF(0x05c6, 0x7102, 2)}, + {QMI_FIXED_INTF(0x05c6, 0x7102, 3)}, + {QMI_FIXED_INTF(0x05c6, 0x8000, 7)}, + {QMI_FIXED_INTF(0x05c6, 0x8001, 6)}, + {QMI_FIXED_INTF(0x05c6, 0x9000, 4)}, + {QMI_FIXED_INTF(0x05c6, 0x9003, 4)}, + {QMI_FIXED_INTF(0x05c6, 0x9005, 2)}, + {QMI_FIXED_INTF(0x05c6, 0x900a, 4)}, + {QMI_FIXED_INTF(0x05c6, 0x900b, 2)}, + {QMI_FIXED_INTF(0x05c6, 0x900c, 4)}, + {QMI_FIXED_INTF(0x05c6, 0x900c, 5)}, + {QMI_FIXED_INTF(0x05c6, 0x900c, 6)}, + {QMI_FIXED_INTF(0x05c6, 0x900d, 5)}, + {QMI_FIXED_INTF(0x05c6, 0x900f, 3)}, + {QMI_FIXED_INTF(0x05c6, 0x900f, 4)}, + {QMI_FIXED_INTF(0x05c6, 0x900f, 5)}, + {QMI_FIXED_INTF(0x05c6, 0x9010, 4)}, + {QMI_FIXED_INTF(0x05c6, 0x9010, 5)}, + {QMI_FIXED_INTF(0x05c6, 0x9011, 3)}, + {QMI_FIXED_INTF(0x05c6, 0x9011, 4)}, + {QMI_FIXED_INTF(0x05c6, 0x9021, 1)}, + {QMI_FIXED_INTF(0x05c6, 0x9022, 2)}, + {QMI_QUIRK_SET_DTR(0x05c6, 0x9025, 4)}, /* Alcatel-sbell ASB TL131 TDD LTE (China Mobile) */ + {QMI_FIXED_INTF(0x05c6, 0x9026, 3)}, + {QMI_FIXED_INTF(0x05c6, 0x902e, 5)}, + {QMI_FIXED_INTF(0x05c6, 0x9031, 5)}, + {QMI_FIXED_INTF(0x05c6, 0x9032, 4)}, + {QMI_FIXED_INTF(0x05c6, 0x9033, 3)}, + {QMI_FIXED_INTF(0x05c6, 0x9033, 4)}, + {QMI_FIXED_INTF(0x05c6, 0x9033, 5)}, + {QMI_FIXED_INTF(0x05c6, 0x9033, 6)}, + {QMI_FIXED_INTF(0x05c6, 0x9034, 3)}, + {QMI_FIXED_INTF(0x05c6, 0x9034, 4)}, + {QMI_FIXED_INTF(0x05c6, 0x9034, 5)}, + {QMI_FIXED_INTF(0x05c6, 0x9034, 6)}, + {QMI_FIXED_INTF(0x05c6, 0x9034, 7)}, + {QMI_FIXED_INTF(0x05c6, 0x9035, 4)}, + {QMI_FIXED_INTF(0x05c6, 0x9036, 3)}, + {QMI_FIXED_INTF(0x05c6, 0x9037, 5)}, + {QMI_FIXED_INTF(0x05c6, 0x9038, 4)}, + {QMI_FIXED_INTF(0x05c6, 0x903b, 7)}, + {QMI_FIXED_INTF(0x05c6, 0x903c, 6)}, + {QMI_FIXED_INTF(0x05c6, 0x903d, 6)}, + {QMI_FIXED_INTF(0x05c6, 0x903e, 5)}, + {QMI_FIXED_INTF(0x05c6, 0x9043, 3)}, + {QMI_FIXED_INTF(0x05c6, 0x9046, 3)}, + {QMI_FIXED_INTF(0x05c6, 0x9046, 4)}, + {QMI_FIXED_INTF(0x05c6, 0x9046, 5)}, + {QMI_FIXED_INTF(0x05c6, 0x9047, 2)}, + {QMI_FIXED_INTF(0x05c6, 0x9047, 3)}, + {QMI_FIXED_INTF(0x05c6, 0x9047, 4)}, + {QMI_FIXED_INTF(0x05c6, 0x9048, 4)}, + {QMI_FIXED_INTF(0x05c6, 0x9048, 5)}, + {QMI_FIXED_INTF(0x05c6, 0x9048, 6)}, + {QMI_FIXED_INTF(0x05c6, 0x9048, 7)}, + {QMI_FIXED_INTF(0x05c6, 0x9048, 8)}, + {QMI_FIXED_INTF(0x05c6, 0x904c, 5)}, + {QMI_FIXED_INTF(0x05c6, 0x904c, 6)}, + {QMI_FIXED_INTF(0x05c6, 0x904c, 7)}, + {QMI_FIXED_INTF(0x05c6, 0x904c, 8)}, + {QMI_FIXED_INTF(0x05c6, 0x9050, 3)}, + {QMI_FIXED_INTF(0x05c6, 0x9052, 4)}, + {QMI_FIXED_INTF(0x05c6, 0x9053, 6)}, + {QMI_FIXED_INTF(0x05c6, 0x9053, 7)}, + {QMI_FIXED_INTF(0x05c6, 0x9054, 5)}, + {QMI_FIXED_INTF(0x05c6, 0x9054, 6)}, + {QMI_FIXED_INTF(0x05c6, 0x9055, 3)}, + {QMI_FIXED_INTF(0x05c6, 0x9055, 4)}, + {QMI_FIXED_INTF(0x05c6, 0x9055, 5)}, + {QMI_FIXED_INTF(0x05c6, 0x9055, 6)}, + {QMI_FIXED_INTF(0x05c6, 0x9055, 7)}, + {QMI_FIXED_INTF(0x05c6, 0x9056, 3)}, + {QMI_FIXED_INTF(0x05c6, 0x9062, 2)}, + {QMI_FIXED_INTF(0x05c6, 0x9062, 3)}, + {QMI_FIXED_INTF(0x05c6, 0x9062, 4)}, + {QMI_FIXED_INTF(0x05c6, 0x9062, 5)}, + {QMI_FIXED_INTF(0x05c6, 0x9062, 6)}, + {QMI_FIXED_INTF(0x05c6, 0x9062, 7)}, + {QMI_FIXED_INTF(0x05c6, 0x9062, 8)}, + {QMI_FIXED_INTF(0x05c6, 0x9062, 9)}, + {QMI_FIXED_INTF(0x05c6, 0x9064, 3)}, + {QMI_FIXED_INTF(0x05c6, 0x9065, 6)}, + {QMI_FIXED_INTF(0x05c6, 0x9065, 7)}, + {QMI_FIXED_INTF(0x05c6, 0x9066, 5)}, + {QMI_FIXED_INTF(0x05c6, 0x9066, 6)}, + {QMI_FIXED_INTF(0x05c6, 0x9067, 1)}, + {QMI_FIXED_INTF(0x05c6, 0x9068, 2)}, + {QMI_FIXED_INTF(0x05c6, 0x9068, 3)}, + {QMI_FIXED_INTF(0x05c6, 0x9068, 4)}, + {QMI_FIXED_INTF(0x05c6, 0x9068, 5)}, + {QMI_FIXED_INTF(0x05c6, 0x9068, 6)}, + {QMI_FIXED_INTF(0x05c6, 0x9068, 7)}, + {QMI_FIXED_INTF(0x05c6, 0x9069, 5)}, + {QMI_FIXED_INTF(0x05c6, 0x9069, 6)}, + {QMI_FIXED_INTF(0x05c6, 0x9069, 7)}, + {QMI_FIXED_INTF(0x05c6, 0x9069, 8)}, + {QMI_FIXED_INTF(0x05c6, 0x9070, 4)}, + {QMI_FIXED_INTF(0x05c6, 0x9070, 5)}, + {QMI_FIXED_INTF(0x05c6, 0x9075, 5)}, + {QMI_FIXED_INTF(0x05c6, 0x9076, 4)}, + {QMI_FIXED_INTF(0x05c6, 0x9076, 5)}, + {QMI_FIXED_INTF(0x05c6, 0x9076, 6)}, + {QMI_FIXED_INTF(0x05c6, 0x9076, 7)}, + {QMI_FIXED_INTF(0x05c6, 0x9076, 8)}, + {QMI_FIXED_INTF(0x05c6, 0x9077, 3)}, + {QMI_FIXED_INTF(0x05c6, 0x9077, 4)}, + {QMI_FIXED_INTF(0x05c6, 0x9077, 5)}, + {QMI_FIXED_INTF(0x05c6, 0x9077, 6)}, + {QMI_FIXED_INTF(0x05c6, 0x9078, 3)}, + {QMI_FIXED_INTF(0x05c6, 0x9079, 4)}, + {QMI_FIXED_INTF(0x05c6, 0x9079, 5)}, + {QMI_FIXED_INTF(0x05c6, 0x9079, 6)}, + {QMI_FIXED_INTF(0x05c6, 0x9079, 7)}, + {QMI_FIXED_INTF(0x05c6, 0x9079, 8)}, + {QMI_FIXED_INTF(0x05c6, 0x9080, 5)}, + {QMI_FIXED_INTF(0x05c6, 0x9080, 6)}, + {QMI_FIXED_INTF(0x05c6, 0x9080, 7)}, + {QMI_FIXED_INTF(0x05c6, 0x9080, 8)}, + {QMI_FIXED_INTF(0x05c6, 0x9083, 3)}, + {QMI_FIXED_INTF(0x05c6, 0x9084, 4)}, + {QMI_FIXED_INTF(0x05c6, 0x90b2, 3)}, /* ublox R410M */ + {QMI_FIXED_INTF(0x05c6, 0x920d, 0)}, + {QMI_FIXED_INTF(0x05c6, 0x920d, 5)}, + {QMI_QUIRK_SET_DTR(0x05c6, 0x9625, 4)}, /* YUGA CLM920-NC5 */ + {QMI_FIXED_INTF(0x0846, 0x68a2, 8)}, + {QMI_FIXED_INTF(0x0846, 0x68d3, 8)}, /* Netgear Aircard 779S */ + {QMI_FIXED_INTF(0x12d1, 0x140c, 1)}, /* Huawei E173 */ + {QMI_FIXED_INTF(0x12d1, 0x14ac, 1)}, /* Huawei E1820 */ + {QMI_FIXED_INTF(0x1435, 0x0918, 3)}, /* Wistron NeWeb D16Q1 */ + {QMI_FIXED_INTF(0x1435, 0x0918, 4)}, /* Wistron NeWeb D16Q1 */ + {QMI_FIXED_INTF(0x1435, 0x0918, 5)}, /* Wistron NeWeb D16Q1 */ + {QMI_FIXED_INTF(0x1435, 0x3185, 4)}, /* Wistron NeWeb M18Q5 */ + {QMI_FIXED_INTF(0x1435, 0xd111, 4)}, /* M9615A DM11-1 D51QC */ + {QMI_FIXED_INTF(0x1435, 0xd181, 3)}, /* Wistron NeWeb D18Q1 */ + {QMI_FIXED_INTF(0x1435, 0xd181, 4)}, /* Wistron NeWeb D18Q1 */ + {QMI_FIXED_INTF(0x1435, 0xd181, 5)}, /* Wistron NeWeb D18Q1 */ + {QMI_FIXED_INTF(0x1435, 0xd182, 4)}, /* Wistron NeWeb D18 */ + {QMI_FIXED_INTF(0x1435, 0xd182, 5)}, /* Wistron NeWeb D18 */ + {QMI_FIXED_INTF(0x1435, 0xd191, 4)}, /* Wistron NeWeb D19Q1 */ + {QMI_QUIRK_SET_DTR(0x1508, 0x1001, 4)}, /* Fibocom NL668 series */ + {QMI_FIXED_INTF(0x1690, 0x7588, 4)}, /* ASKEY WWHC050 */ + {QMI_FIXED_INTF(0x16d8, 0x6003, 0)}, /* CMOTech 6003 */ + {QMI_FIXED_INTF(0x16d8, 0x6007, 0)}, /* CMOTech CHE-628S */ + {QMI_FIXED_INTF(0x16d8, 0x6008, 0)}, /* CMOTech CMU-301 */ + {QMI_FIXED_INTF(0x16d8, 0x6280, 0)}, /* CMOTech CHU-628 */ + {QMI_FIXED_INTF(0x16d8, 0x7001, 0)}, /* CMOTech CHU-720S */ + {QMI_FIXED_INTF(0x16d8, 0x7002, 0)}, /* CMOTech 7002 */ + {QMI_FIXED_INTF(0x16d8, 0x7003, 4)}, /* CMOTech CHU-629K */ + {QMI_FIXED_INTF(0x16d8, 0x7004, 3)}, /* CMOTech 7004 */ + {QMI_FIXED_INTF(0x16d8, 0x7006, 5)}, /* CMOTech CGU-629 */ + {QMI_FIXED_INTF(0x16d8, 0x700a, 4)}, /* CMOTech CHU-629S */ + {QMI_FIXED_INTF(0x16d8, 0x7211, 0)}, /* CMOTech CHU-720I */ + {QMI_FIXED_INTF(0x16d8, 0x7212, 0)}, /* CMOTech 7212 */ + {QMI_FIXED_INTF(0x16d8, 0x7213, 0)}, /* CMOTech 7213 */ + {QMI_FIXED_INTF(0x16d8, 0x7251, 1)}, /* CMOTech 7251 */ + {QMI_FIXED_INTF(0x16d8, 0x7252, 1)}, /* CMOTech 7252 */ + {QMI_FIXED_INTF(0x16d8, 0x7253, 1)}, /* CMOTech 7253 */ + {QMI_FIXED_INTF(0x19d2, 0x0002, 1)}, + {QMI_FIXED_INTF(0x19d2, 0x0012, 1)}, + {QMI_FIXED_INTF(0x19d2, 0x0017, 3)}, + {QMI_FIXED_INTF(0x19d2, 0x0019, 3)}, /* ONDA MT689DC */ + {QMI_FIXED_INTF(0x19d2, 0x0021, 4)}, + {QMI_FIXED_INTF(0x19d2, 0x0025, 1)}, + {QMI_FIXED_INTF(0x19d2, 0x0031, 4)}, + {QMI_FIXED_INTF(0x19d2, 0x0042, 4)}, + {QMI_FIXED_INTF(0x19d2, 0x0049, 5)}, + {QMI_FIXED_INTF(0x19d2, 0x0052, 4)}, + {QMI_FIXED_INTF(0x19d2, 0x0055, 1)}, /* ZTE (Vodafone) K3520-Z */ + {QMI_FIXED_INTF(0x19d2, 0x0058, 4)}, + {QMI_FIXED_INTF(0x19d2, 0x0063, 4)}, /* ZTE (Vodafone) K3565-Z */ + {QMI_FIXED_INTF(0x19d2, 0x0104, 4)}, /* ZTE (Vodafone) K4505-Z */ + {QMI_FIXED_INTF(0x19d2, 0x0113, 5)}, + {QMI_FIXED_INTF(0x19d2, 0x0118, 5)}, + {QMI_FIXED_INTF(0x19d2, 0x0121, 5)}, + {QMI_FIXED_INTF(0x19d2, 0x0123, 4)}, + {QMI_FIXED_INTF(0x19d2, 0x0124, 5)}, + {QMI_FIXED_INTF(0x19d2, 0x0125, 6)}, + {QMI_FIXED_INTF(0x19d2, 0x0126, 5)}, + {QMI_FIXED_INTF(0x19d2, 0x0130, 1)}, + {QMI_FIXED_INTF(0x19d2, 0x0133, 3)}, + {QMI_FIXED_INTF(0x19d2, 0x0141, 5)}, + {QMI_FIXED_INTF(0x19d2, 0x0157, 5)}, /* ZTE MF683 */ + {QMI_FIXED_INTF(0x19d2, 0x0158, 3)}, + {QMI_FIXED_INTF(0x19d2, 0x0167, 4)}, /* ZTE MF820D */ + {QMI_FIXED_INTF(0x19d2, 0x0168, 4)}, + {QMI_FIXED_INTF(0x19d2, 0x0176, 3)}, + {QMI_FIXED_INTF(0x19d2, 0x0178, 3)}, + {QMI_FIXED_INTF(0x19d2, 0x0191, 4)}, /* ZTE EuFi890 */ + {QMI_FIXED_INTF(0x19d2, 0x0199, 1)}, /* ZTE MF820S */ + {QMI_FIXED_INTF(0x19d2, 0x0200, 1)}, + {QMI_FIXED_INTF(0x19d2, 0x0257, 3)}, /* ZTE MF821 */ + {QMI_FIXED_INTF(0x19d2, 0x0265, 4)}, /* ONDA MT8205 4G LTE */ + {QMI_FIXED_INTF(0x19d2, 0x0284, 4)}, /* ZTE MF880 */ + {QMI_FIXED_INTF(0x19d2, 0x0326, 4)}, /* ZTE MF821D */ + {QMI_FIXED_INTF(0x19d2, 0x0396, 3)}, /* ZTE ZM8620 */ + {QMI_FIXED_INTF(0x19d2, 0x0412, 4)}, /* Telewell TW-LTE 4G */ + {QMI_FIXED_INTF(0x19d2, 0x1008, 4)}, /* ZTE (Vodafone) K3570-Z */ + {QMI_FIXED_INTF(0x19d2, 0x1010, 4)}, /* ZTE (Vodafone) K3571-Z */ + {QMI_FIXED_INTF(0x19d2, 0x1012, 4)}, + {QMI_FIXED_INTF(0x19d2, 0x1018, 3)}, /* ZTE (Vodafone) K5006-Z */ + {QMI_FIXED_INTF(0x19d2, 0x1021, 2)}, + {QMI_FIXED_INTF(0x19d2, 0x1245, 4)}, + {QMI_FIXED_INTF(0x19d2, 0x1247, 4)}, + {QMI_FIXED_INTF(0x19d2, 0x1252, 4)}, + {QMI_FIXED_INTF(0x19d2, 0x1254, 4)}, + {QMI_FIXED_INTF(0x19d2, 0x1255, 3)}, + {QMI_FIXED_INTF(0x19d2, 0x1255, 4)}, + {QMI_FIXED_INTF(0x19d2, 0x1256, 4)}, + {QMI_FIXED_INTF(0x19d2, 0x1270, 5)}, /* ZTE MF667 */ + {QMI_FIXED_INTF(0x19d2, 0x1275, 3)}, /* ZTE P685M */ + {QMI_FIXED_INTF(0x19d2, 0x1401, 2)}, + {QMI_FIXED_INTF(0x19d2, 0x1402, 2)}, /* ZTE MF60 */ + {QMI_FIXED_INTF(0x19d2, 0x1424, 2)}, + {QMI_FIXED_INTF(0x19d2, 0x1425, 2)}, + {QMI_FIXED_INTF(0x19d2, 0x1426, 2)}, /* ZTE MF91 */ + {QMI_FIXED_INTF(0x19d2, 0x1428, 2)}, /* Telewell TW-LTE 4G v2 */ + {QMI_FIXED_INTF(0x19d2, 0x1432, 3)}, /* ZTE ME3620 */ + {QMI_FIXED_INTF(0x19d2, 0x2002, 4)}, /* ZTE (Vodafone) K3765-Z */ + {QMI_FIXED_INTF(0x2001, 0x7e16, 3)}, /* D-Link DWM-221 */ + {QMI_FIXED_INTF(0x2001, 0x7e19, 4)}, /* D-Link DWM-221 B1 */ + {QMI_FIXED_INTF(0x2001, 0x7e35, 4)}, /* D-Link DWM-222 */ + {QMI_FIXED_INTF(0x2001, 0x7e3d, 4)}, /* D-Link DWM-222 A2 */ + {QMI_FIXED_INTF(0x2020, 0x2031, 4)}, /* Olicard 600 */ + {QMI_FIXED_INTF(0x2020, 0x2033, 4)}, /* BroadMobi BM806U */ + {QMI_FIXED_INTF(0x2020, 0x2060, 4)}, /* BroadMobi BM818 */ + {QMI_FIXED_INTF(0x0f3d, 0x68a2, 8)}, /* Sierra Wireless MC7700 */ + {QMI_FIXED_INTF(0x114f, 0x68a2, 8)}, /* Sierra Wireless MC7750 */ + {QMI_FIXED_INTF(0x1199, 0x68a2, 8)}, /* Sierra Wireless MC7710 in QMI mode */ + {QMI_FIXED_INTF(0x1199, 0x68a2, 19)}, /* Sierra Wireless MC7710 in QMI mode */ + {QMI_QUIRK_SET_DTR(0x1199, 0x68c0, 8)}, /* Sierra Wireless MC7304/MC7354, WP76xx */ + {QMI_QUIRK_SET_DTR(0x1199, 0x68c0, 10)},/* Sierra Wireless MC7304/MC7354 */ + {QMI_FIXED_INTF(0x1199, 0x901c, 8)}, /* Sierra Wireless EM7700 */ + {QMI_FIXED_INTF(0x1199, 0x901f, 8)}, /* Sierra Wireless EM7355 */ + {QMI_FIXED_INTF(0x1199, 0x9041, 8)}, /* Sierra Wireless MC7305/MC7355 */ + {QMI_FIXED_INTF(0x1199, 0x9041, 10)}, /* Sierra Wireless MC7305/MC7355 */ + {QMI_FIXED_INTF(0x1199, 0x9051, 8)}, /* Netgear AirCard 340U */ + {QMI_FIXED_INTF(0x1199, 0x9053, 8)}, /* Sierra Wireless Modem */ + {QMI_FIXED_INTF(0x1199, 0x9054, 8)}, /* Sierra Wireless Modem */ + {QMI_FIXED_INTF(0x1199, 0x9055, 8)}, /* Netgear AirCard 341U */ + {QMI_FIXED_INTF(0x1199, 0x9056, 8)}, /* Sierra Wireless Modem */ + {QMI_FIXED_INTF(0x1199, 0x9057, 8)}, + {QMI_FIXED_INTF(0x1199, 0x9061, 8)}, /* Sierra Wireless Modem */ + {QMI_FIXED_INTF(0x1199, 0x9063, 8)}, /* Sierra Wireless EM7305 */ + {QMI_FIXED_INTF(0x1199, 0x9063, 10)}, /* Sierra Wireless EM7305 */ + {QMI_QUIRK_SET_DTR(0x1199, 0x9071, 8)}, /* Sierra Wireless MC74xx */ + {QMI_QUIRK_SET_DTR(0x1199, 0x9071, 10)},/* Sierra Wireless MC74xx */ + {QMI_QUIRK_SET_DTR(0x1199, 0x9079, 8)}, /* Sierra Wireless EM74xx */ + {QMI_QUIRK_SET_DTR(0x1199, 0x9079, 10)},/* Sierra Wireless EM74xx */ + {QMI_QUIRK_SET_DTR(0x1199, 0x907b, 8)}, /* Sierra Wireless EM74xx */ + {QMI_QUIRK_SET_DTR(0x1199, 0x907b, 10)},/* Sierra Wireless EM74xx */ + {QMI_QUIRK_SET_DTR(0x1199, 0x9091, 8)}, /* Sierra Wireless EM7565 */ + {QMI_FIXED_INTF(0x1bbb, 0x011e, 4)}, /* Telekom Speedstick LTE II (Alcatel One Touch L100V LTE) */ + {QMI_FIXED_INTF(0x1bbb, 0x0203, 2)}, /* Alcatel L800MA */ + {QMI_FIXED_INTF(0x2357, 0x0201, 4)}, /* TP-LINK HSUPA Modem MA180 */ + {QMI_FIXED_INTF(0x2357, 0x9000, 4)}, /* TP-LINK MA260 */ + {QMI_QUIRK_SET_DTR(0x1bc7, 0x1031, 3)}, /* Telit LE910C1-EUX */ + {QMI_QUIRK_SET_DTR(0x1bc7, 0x1040, 2)}, /* Telit LE922A */ + {QMI_QUIRK_SET_DTR(0x1bc7, 0x1050, 2)}, /* Telit FN980 */ + {QMI_FIXED_INTF(0x1bc7, 0x1100, 3)}, /* Telit ME910 */ + {QMI_FIXED_INTF(0x1bc7, 0x1101, 3)}, /* Telit ME910 dual modem */ + {QMI_FIXED_INTF(0x1bc7, 0x1200, 5)}, /* Telit LE920 */ + {QMI_QUIRK_SET_DTR(0x1bc7, 0x1201, 2)}, /* Telit LE920, LE920A4 */ + {QMI_QUIRK_SET_DTR(0x1bc7, 0x1230, 2)}, /* Telit LE910Cx */ + {QMI_QUIRK_SET_DTR(0x1bc7, 0x1260, 2)}, /* Telit LE910Cx */ + {QMI_QUIRK_SET_DTR(0x1bc7, 0x1261, 2)}, /* Telit LE910Cx */ + {QMI_QUIRK_SET_DTR(0x1bc7, 0x1900, 1)}, /* Telit LN940 series */ + {QMI_FIXED_INTF(0x1c9e, 0x9801, 3)}, /* Telewell TW-3G HSPA+ */ + {QMI_FIXED_INTF(0x1c9e, 0x9803, 4)}, /* Telewell TW-3G HSPA+ */ + {QMI_FIXED_INTF(0x1c9e, 0x9b01, 3)}, /* XS Stick W100-2 from 4G Systems */ + {QMI_FIXED_INTF(0x0b3c, 0xc000, 4)}, /* Olivetti Olicard 100 */ + {QMI_FIXED_INTF(0x0b3c, 0xc001, 4)}, /* Olivetti Olicard 120 */ + {QMI_FIXED_INTF(0x0b3c, 0xc002, 4)}, /* Olivetti Olicard 140 */ + {QMI_FIXED_INTF(0x0b3c, 0xc004, 6)}, /* Olivetti Olicard 155 */ + {QMI_FIXED_INTF(0x0b3c, 0xc005, 6)}, /* Olivetti Olicard 200 */ + {QMI_FIXED_INTF(0x0b3c, 0xc00a, 6)}, /* Olivetti Olicard 160 */ + {QMI_FIXED_INTF(0x0b3c, 0xc00b, 4)}, /* Olivetti Olicard 500 */ + {QMI_FIXED_INTF(0x1e2d, 0x0060, 4)}, /* Cinterion PLxx */ + {QMI_QUIRK_SET_DTR(0x1e2d, 0x006f, 8)}, /* Cinterion PLS83/PLS63 */ + {QMI_FIXED_INTF(0x1e2d, 0x0053, 4)}, /* Cinterion PHxx,PXxx */ + {QMI_FIXED_INTF(0x1e2d, 0x0063, 10)}, /* Cinterion ALASxx (1 RmNet) */ + {QMI_FIXED_INTF(0x1e2d, 0x0082, 4)}, /* Cinterion PHxx,PXxx (2 RmNet) */ + {QMI_FIXED_INTF(0x1e2d, 0x0082, 5)}, /* Cinterion PHxx,PXxx (2 RmNet) */ + {QMI_FIXED_INTF(0x1e2d, 0x0083, 4)}, /* Cinterion PHxx,PXxx (1 RmNet + USB Audio)*/ + {QMI_QUIRK_SET_DTR(0x1e2d, 0x00b0, 4)}, /* Cinterion CLS8 */ + {QMI_FIXED_INTF(0x1e2d, 0x00b7, 0)}, /* Cinterion MV31 RmNet */ + {QMI_FIXED_INTF(0x413c, 0x81a2, 8)}, /* Dell Wireless 5806 Gobi(TM) 4G LTE Mobile Broadband Card */ + {QMI_FIXED_INTF(0x413c, 0x81a3, 8)}, /* Dell Wireless 5570 HSPA+ (42Mbps) Mobile Broadband Card */ + {QMI_FIXED_INTF(0x413c, 0x81a4, 8)}, /* Dell Wireless 5570e HSPA+ (42Mbps) Mobile Broadband Card */ + {QMI_FIXED_INTF(0x413c, 0x81a8, 8)}, /* Dell Wireless 5808 Gobi(TM) 4G LTE Mobile Broadband Card */ + {QMI_FIXED_INTF(0x413c, 0x81a9, 8)}, /* Dell Wireless 5808e Gobi(TM) 4G LTE Mobile Broadband Card */ + {QMI_FIXED_INTF(0x413c, 0x81b1, 8)}, /* Dell Wireless 5809e Gobi(TM) 4G LTE Mobile Broadband Card */ + {QMI_FIXED_INTF(0x413c, 0x81b3, 8)}, /* Dell Wireless 5809e Gobi(TM) 4G LTE Mobile Broadband Card (rev3) */ + {QMI_FIXED_INTF(0x413c, 0x81b6, 8)}, /* Dell Wireless 5811e */ + {QMI_FIXED_INTF(0x413c, 0x81b6, 10)}, /* Dell Wireless 5811e */ + {QMI_FIXED_INTF(0x413c, 0x81cc, 8)}, /* Dell Wireless 5816e */ + {QMI_FIXED_INTF(0x413c, 0x81d7, 0)}, /* Dell Wireless 5821e */ + {QMI_FIXED_INTF(0x413c, 0x81d7, 1)}, /* Dell Wireless 5821e preproduction config */ + {QMI_FIXED_INTF(0x413c, 0x81e0, 0)}, /* Dell Wireless 5821e with eSIM support*/ + {QMI_FIXED_INTF(0x413c, 0x81e4, 0)}, /* Dell Wireless 5829e with eSIM support*/ + {QMI_FIXED_INTF(0x413c, 0x81e6, 0)}, /* Dell Wireless 5829e */ + {QMI_FIXED_INTF(0x03f0, 0x4e1d, 8)}, /* HP lt4111 LTE/EV-DO/HSPA+ Gobi 4G Module */ + {QMI_FIXED_INTF(0x03f0, 0x9d1d, 1)}, /* HP lt4120 Snapdragon X5 LTE */ + {QMI_FIXED_INTF(0x22de, 0x9061, 3)}, /* WeTelecom WPD-600N */ + {QMI_QUIRK_SET_DTR(0x1e0e, 0x9001, 5)}, /* SIMCom 7100E, 7230E, 7600E ++ */ + {QMI_QUIRK_SET_DTR(0x2c7c, 0x0121, 4)}, /* Quectel EC21 Mini PCIe */ + {QMI_QUIRK_SET_DTR(0x2c7c, 0x0191, 4)}, /* Quectel EG91 */ + {QMI_QUIRK_SET_DTR(0x2c7c, 0x0195, 4)}, /* Quectel EG95 */ + {QMI_FIXED_INTF(0x2c7c, 0x0296, 4)}, /* Quectel BG96 */ + {QMI_QUIRK_SET_DTR(0x2cb7, 0x0104, 4)}, /* Fibocom NL678 series */ + {QMI_FIXED_INTF(0x0489, 0xe0b4, 0)}, /* Foxconn T77W968 LTE */ + {QMI_FIXED_INTF(0x0489, 0xe0b5, 0)}, /* Foxconn T77W968 LTE with eSIM support*/ + {QMI_FIXED_INTF(0x2692, 0x9025, 4)}, /* Cellient MPL200 (rebranded Qualcomm 05c6:9025) */ + + /* 4. Gobi 1000 devices */ + {QMI_GOBI1K_DEVICE(0x05c6, 0x9212)}, /* Acer Gobi Modem Device */ + {QMI_GOBI1K_DEVICE(0x03f0, 0x1f1d)}, /* HP un2400 Gobi Modem Device */ + {QMI_GOBI1K_DEVICE(0x04da, 0x250d)}, /* Panasonic Gobi Modem device */ + {QMI_GOBI1K_DEVICE(0x413c, 0x8172)}, /* Dell Gobi Modem device */ + {QMI_GOBI1K_DEVICE(0x1410, 0xa001)}, /* Novatel/Verizon USB-1000 */ + {QMI_GOBI1K_DEVICE(0x1410, 0xa002)}, /* Novatel Gobi Modem device */ + {QMI_GOBI1K_DEVICE(0x1410, 0xa003)}, /* Novatel Gobi Modem device */ + {QMI_GOBI1K_DEVICE(0x1410, 0xa004)}, /* Novatel Gobi Modem device */ + {QMI_GOBI1K_DEVICE(0x1410, 0xa005)}, /* Novatel Gobi Modem device */ + {QMI_GOBI1K_DEVICE(0x1410, 0xa006)}, /* Novatel Gobi Modem device */ + {QMI_GOBI1K_DEVICE(0x1410, 0xa007)}, /* Novatel Gobi Modem device */ + {QMI_GOBI1K_DEVICE(0x0b05, 0x1776)}, /* Asus Gobi Modem device */ + {QMI_GOBI1K_DEVICE(0x19d2, 0xfff3)}, /* ONDA Gobi Modem device */ + {QMI_GOBI1K_DEVICE(0x05c6, 0x9001)}, /* Generic Gobi Modem device */ + {QMI_GOBI1K_DEVICE(0x05c6, 0x9002)}, /* Generic Gobi Modem device */ + {QMI_GOBI1K_DEVICE(0x05c6, 0x9202)}, /* Generic Gobi Modem device */ + {QMI_GOBI1K_DEVICE(0x05c6, 0x9203)}, /* Generic Gobi Modem device */ + {QMI_GOBI1K_DEVICE(0x05c6, 0x9222)}, /* Generic Gobi Modem device */ + {QMI_GOBI1K_DEVICE(0x05c6, 0x9009)}, /* Generic Gobi Modem device */ + + /* 5. Gobi 2000 and 3000 devices */ + {QMI_GOBI_DEVICE(0x413c, 0x8186)}, /* Dell Gobi 2000 Modem device (N0218, VU936) */ + {QMI_GOBI_DEVICE(0x413c, 0x8194)}, /* Dell Gobi 3000 Composite */ + {QMI_GOBI_DEVICE(0x05c6, 0x920b)}, /* Generic Gobi 2000 Modem device */ + {QMI_GOBI_DEVICE(0x05c6, 0x9225)}, /* Sony Gobi 2000 Modem device (N0279, VU730) */ + {QMI_GOBI_DEVICE(0x05c6, 0x9245)}, /* Samsung Gobi 2000 Modem device (VL176) */ + {QMI_GOBI_DEVICE(0x03f0, 0x251d)}, /* HP Gobi 2000 Modem device (VP412) */ + {QMI_GOBI_DEVICE(0x05c6, 0x9215)}, /* Acer Gobi 2000 Modem device (VP413) */ + {QMI_FIXED_INTF(0x05c6, 0x9215, 4)}, /* Quectel EC20 Mini PCIe */ + {QMI_GOBI_DEVICE(0x05c6, 0x9265)}, /* Asus Gobi 2000 Modem device (VR305) */ + {QMI_GOBI_DEVICE(0x05c6, 0x9235)}, /* Top Global Gobi 2000 Modem device (VR306) */ + {QMI_GOBI_DEVICE(0x05c6, 0x9275)}, /* iRex Technologies Gobi 2000 Modem device (VR307) */ + {QMI_GOBI_DEVICE(0x0af0, 0x8120)}, /* Option GTM681W */ + {QMI_GOBI_DEVICE(0x1199, 0x68a5)}, /* Sierra Wireless Modem */ + {QMI_GOBI_DEVICE(0x1199, 0x68a9)}, /* Sierra Wireless Modem */ + {QMI_GOBI_DEVICE(0x1199, 0x9001)}, /* Sierra Wireless Gobi 2000 Modem device (VT773) */ + {QMI_GOBI_DEVICE(0x1199, 0x9002)}, /* Sierra Wireless Gobi 2000 Modem device (VT773) */ + {QMI_GOBI_DEVICE(0x1199, 0x9003)}, /* Sierra Wireless Gobi 2000 Modem device (VT773) */ + {QMI_GOBI_DEVICE(0x1199, 0x9004)}, /* Sierra Wireless Gobi 2000 Modem device (VT773) */ + {QMI_GOBI_DEVICE(0x1199, 0x9005)}, /* Sierra Wireless Gobi 2000 Modem device (VT773) */ + {QMI_GOBI_DEVICE(0x1199, 0x9006)}, /* Sierra Wireless Gobi 2000 Modem device (VT773) */ + {QMI_GOBI_DEVICE(0x1199, 0x9007)}, /* Sierra Wireless Gobi 2000 Modem device (VT773) */ + {QMI_GOBI_DEVICE(0x1199, 0x9008)}, /* Sierra Wireless Gobi 2000 Modem device (VT773) */ + {QMI_GOBI_DEVICE(0x1199, 0x9009)}, /* Sierra Wireless Gobi 2000 Modem device (VT773) */ + {QMI_GOBI_DEVICE(0x1199, 0x900a)}, /* Sierra Wireless Gobi 2000 Modem device (VT773) */ + {QMI_GOBI_DEVICE(0x1199, 0x9011)}, /* Sierra Wireless Gobi 2000 Modem device (MC8305) */ + {QMI_GOBI_DEVICE(0x16d8, 0x8002)}, /* CMDTech Gobi 2000 Modem device (VU922) */ + {QMI_GOBI_DEVICE(0x05c6, 0x9205)}, /* Gobi 2000 Modem device */ + {QMI_GOBI_DEVICE(0x1199, 0x9013)}, /* Sierra Wireless Gobi 3000 Modem device (MC8355) */ + {QMI_GOBI_DEVICE(0x03f0, 0x371d)}, /* HP un2430 Mobile Broadband Module */ + {QMI_GOBI_DEVICE(0x1199, 0x9015)}, /* Sierra Wireless Gobi 3000 Modem device */ + {QMI_GOBI_DEVICE(0x1199, 0x9019)}, /* Sierra Wireless Gobi 3000 Modem device */ + {QMI_GOBI_DEVICE(0x1199, 0x901b)}, /* Sierra Wireless MC7770 */ + {QMI_GOBI_DEVICE(0x12d1, 0x14f1)}, /* Sony Gobi 3000 Composite */ + {QMI_GOBI_DEVICE(0x1410, 0xa021)}, /* Foxconn Gobi 3000 Modem device (Novatel E396) */ + + { } /* END */ +}; +MODULE_DEVICE_TABLE(usb, products); + +static bool quectel_ec20_detected(struct usb_interface *intf) +{ + struct usb_device *dev = interface_to_usbdev(intf); + + if (dev->actconfig && + le16_to_cpu(dev->descriptor.idVendor) == 0x05c6 && + le16_to_cpu(dev->descriptor.idProduct) == 0x9215 && + dev->actconfig->desc.bNumInterfaces == 5) + return true; + + return false; +} + +static int qmi_wwan_probe(struct usb_interface *intf, + const struct usb_device_id *prod) +{ + struct usb_device_id *id = (struct usb_device_id *)prod; + struct usb_interface_descriptor *desc = &intf->cur_altsetting->desc; + + /* Workaround to enable dynamic IDs. This disables usbnet + * blacklisting functionality. Which, if required, can be + * reimplemented here by using a magic "blacklist" value + * instead of 0 in the static device id table + */ + if (!id->driver_info) { + dev_dbg(&intf->dev, "setting defaults for dynamic device id\n"); + id->driver_info = (unsigned long)&qmi_wwan_info; + } + + /* There are devices where the same interface number can be + * configured as different functions. We should only bind to + * vendor specific functions when matching on interface number + */ + if (id->match_flags & USB_DEVICE_ID_MATCH_INT_NUMBER && + desc->bInterfaceClass != USB_CLASS_VENDOR_SPEC) { + dev_dbg(&intf->dev, + "Rejecting interface number match for class %02x\n", + desc->bInterfaceClass); + return -ENODEV; + } + + /* Quectel EC20 quirk where we've QMI on interface 4 instead of 0 */ + if (quectel_ec20_detected(intf) && desc->bInterfaceNumber == 0) { + dev_dbg(&intf->dev, "Quectel EC20 quirk, skipping interface 0\n"); + return -ENODEV; + } + + /* Several Quectel modems supports dynamic interface configuration, so + * we need to match on class/subclass/protocol. These values are + * identical for the diagnostic- and QMI-interface, but bNumEndpoints is + * different. Ignore the current interface if the number of endpoints + * equals the number for the diag interface (two). + */ + if (desc->bNumEndpoints == 2) + return -ENODEV; + + return usbnet_probe(intf, id); +} + +static void qmi_wwan_disconnect(struct usb_interface *intf) +{ + struct usbnet *dev = usb_get_intfdata(intf); + struct qmi_wwan_state *info; + struct list_head *iter; + struct net_device *ldev; + LIST_HEAD(list); + + /* called twice if separate control and data intf */ + if (!dev) + return; + info = (void *)&dev->data; + if (info->flags & QMI_WWAN_FLAG_MUX) { + if (!rtnl_trylock()) { + restart_syscall(); + return; + } + rcu_read_lock(); + netdev_for_each_upper_dev_rcu(dev->net, ldev, iter) + qmimux_unregister_device(ldev, &list); + rcu_read_unlock(); + unregister_netdevice_many(&list); + rtnl_unlock(); + info->flags &= ~QMI_WWAN_FLAG_MUX; + } + usbnet_disconnect(intf); +} + +static struct usb_driver qmi_wwan_driver = { + .name = "qmi_wwan", + .id_table = products, + .probe = qmi_wwan_probe, + .disconnect = qmi_wwan_disconnect, + .suspend = qmi_wwan_suspend, + .resume = qmi_wwan_resume, + .reset_resume = qmi_wwan_resume, + .supports_autosuspend = 1, + .disable_hub_initiated_lpm = 1, +}; + +module_usb_driver(qmi_wwan_driver); + +MODULE_AUTHOR("Bjørn Mork <bjorn@mork.no>"); +MODULE_DESCRIPTION("Qualcomm MSM Interface (QMI) WWAN driver"); +MODULE_LICENSE("GPL"); |