diff options
Diffstat (limited to 'drivers/net/wireless/ath/ath5k/dma.c')
| -rw-r--r-- | drivers/net/wireless/ath/ath5k/dma.c | 928 |
1 files changed, 928 insertions, 0 deletions
diff --git a/drivers/net/wireless/ath/ath5k/dma.c b/drivers/net/wireless/ath/ath5k/dma.c new file mode 100644 index 000000000..e6c52f7c2 --- /dev/null +++ b/drivers/net/wireless/ath/ath5k/dma.c @@ -0,0 +1,928 @@ +/* + * Copyright (c) 2004-2008 Reyk Floeter <reyk@openbsd.org> + * Copyright (c) 2006-2008 Nick Kossifidis <mickflemm@gmail.com> + * + * Permission to use, copy, modify, and distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + * + */ + +/*************************************\ +* DMA and interrupt masking functions * +\*************************************/ + +/** + * DOC: DMA and interrupt masking functions + * + * Here we setup descriptor pointers (rxdp/txdp) start/stop dma engine and + * handle queue setup for 5210 chipset (rest are handled on qcu.c). + * Also we setup interrupt mask register (IMR) and read the various interrupt + * status registers (ISR). + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include "ath5k.h" +#include "reg.h" +#include "debug.h" + + +/*********\ +* Receive * +\*********/ + +/** + * ath5k_hw_start_rx_dma() - Start DMA receive + * @ah: The &struct ath5k_hw + */ +void +ath5k_hw_start_rx_dma(struct ath5k_hw *ah) +{ + ath5k_hw_reg_write(ah, AR5K_CR_RXE, AR5K_CR); + ath5k_hw_reg_read(ah, AR5K_CR); +} + +/** + * ath5k_hw_stop_rx_dma() - Stop DMA receive + * @ah: The &struct ath5k_hw + */ +static int +ath5k_hw_stop_rx_dma(struct ath5k_hw *ah) +{ + unsigned int i; + + ath5k_hw_reg_write(ah, AR5K_CR_RXD, AR5K_CR); + + /* + * It may take some time to disable the DMA receive unit + */ + for (i = 1000; i > 0 && + (ath5k_hw_reg_read(ah, AR5K_CR) & AR5K_CR_RXE) != 0; + i--) + udelay(100); + + if (!i) + ATH5K_DBG(ah, ATH5K_DEBUG_DMA, + "failed to stop RX DMA !\n"); + + return i ? 0 : -EBUSY; +} + +/** + * ath5k_hw_get_rxdp() - Get RX Descriptor's address + * @ah: The &struct ath5k_hw + */ +u32 +ath5k_hw_get_rxdp(struct ath5k_hw *ah) +{ + return ath5k_hw_reg_read(ah, AR5K_RXDP); +} + +/** + * ath5k_hw_set_rxdp() - Set RX Descriptor's address + * @ah: The &struct ath5k_hw + * @phys_addr: RX descriptor address + * + * Returns -EIO if rx is active + */ +int +ath5k_hw_set_rxdp(struct ath5k_hw *ah, u32 phys_addr) +{ + if (ath5k_hw_reg_read(ah, AR5K_CR) & AR5K_CR_RXE) { + ATH5K_DBG(ah, ATH5K_DEBUG_DMA, + "tried to set RXDP while rx was active !\n"); + return -EIO; + } + + ath5k_hw_reg_write(ah, phys_addr, AR5K_RXDP); + return 0; +} + + +/**********\ +* Transmit * +\**********/ + +/** + * ath5k_hw_start_tx_dma() - Start DMA transmit for a specific queue + * @ah: The &struct ath5k_hw + * @queue: The hw queue number + * + * Start DMA transmit for a specific queue and since 5210 doesn't have + * QCU/DCU, set up queue parameters for 5210 here based on queue type (one + * queue for normal data and one queue for beacons). For queue setup + * on newer chips check out qcu.c. Returns -EINVAL if queue number is out + * of range or if queue is already disabled. + * + * NOTE: Must be called after setting up tx control descriptor for that + * queue (see below). + */ +int +ath5k_hw_start_tx_dma(struct ath5k_hw *ah, unsigned int queue) +{ + u32 tx_queue; + + AR5K_ASSERT_ENTRY(queue, ah->ah_capabilities.cap_queues.q_tx_num); + + /* Return if queue is declared inactive */ + if (ah->ah_txq[queue].tqi_type == AR5K_TX_QUEUE_INACTIVE) + return -EINVAL; + + if (ah->ah_version == AR5K_AR5210) { + tx_queue = ath5k_hw_reg_read(ah, AR5K_CR); + + /* + * Set the queue by type on 5210 + */ + switch (ah->ah_txq[queue].tqi_type) { + case AR5K_TX_QUEUE_DATA: + tx_queue |= AR5K_CR_TXE0 & ~AR5K_CR_TXD0; + break; + case AR5K_TX_QUEUE_BEACON: + tx_queue |= AR5K_CR_TXE1 & ~AR5K_CR_TXD1; + ath5k_hw_reg_write(ah, AR5K_BCR_TQ1V | AR5K_BCR_BDMAE, + AR5K_BSR); + break; + case AR5K_TX_QUEUE_CAB: + tx_queue |= AR5K_CR_TXE1 & ~AR5K_CR_TXD1; + ath5k_hw_reg_write(ah, AR5K_BCR_TQ1FV | AR5K_BCR_TQ1V | + AR5K_BCR_BDMAE, AR5K_BSR); + break; + default: + return -EINVAL; + } + /* Start queue */ + ath5k_hw_reg_write(ah, tx_queue, AR5K_CR); + ath5k_hw_reg_read(ah, AR5K_CR); + } else { + /* Return if queue is disabled */ + if (AR5K_REG_READ_Q(ah, AR5K_QCU_TXD, queue)) + return -EIO; + + /* Start queue */ + AR5K_REG_WRITE_Q(ah, AR5K_QCU_TXE, queue); + } + + return 0; +} + +/** + * ath5k_hw_stop_tx_dma() - Stop DMA transmit on a specific queue + * @ah: The &struct ath5k_hw + * @queue: The hw queue number + * + * Stop DMA transmit on a specific hw queue and drain queue so we don't + * have any pending frames. Returns -EBUSY if we still have pending frames, + * -EINVAL if queue number is out of range or inactive. + */ +static int +ath5k_hw_stop_tx_dma(struct ath5k_hw *ah, unsigned int queue) +{ + unsigned int i = 40; + u32 tx_queue, pending; + + AR5K_ASSERT_ENTRY(queue, ah->ah_capabilities.cap_queues.q_tx_num); + + /* Return if queue is declared inactive */ + if (ah->ah_txq[queue].tqi_type == AR5K_TX_QUEUE_INACTIVE) + return -EINVAL; + + if (ah->ah_version == AR5K_AR5210) { + tx_queue = ath5k_hw_reg_read(ah, AR5K_CR); + + /* + * Set by queue type + */ + switch (ah->ah_txq[queue].tqi_type) { + case AR5K_TX_QUEUE_DATA: + tx_queue |= AR5K_CR_TXD0 & ~AR5K_CR_TXE0; + break; + case AR5K_TX_QUEUE_BEACON: + case AR5K_TX_QUEUE_CAB: + /* XXX Fix me... */ + tx_queue |= AR5K_CR_TXD1 & ~AR5K_CR_TXD1; + ath5k_hw_reg_write(ah, 0, AR5K_BSR); + break; + default: + return -EINVAL; + } + + /* Stop queue */ + ath5k_hw_reg_write(ah, tx_queue, AR5K_CR); + ath5k_hw_reg_read(ah, AR5K_CR); + } else { + + /* + * Enable DCU early termination to quickly + * flush any pending frames from QCU + */ + AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_MISC(queue), + AR5K_QCU_MISC_DCU_EARLY); + + /* + * Schedule TX disable and wait until queue is empty + */ + AR5K_REG_WRITE_Q(ah, AR5K_QCU_TXD, queue); + + /* Wait for queue to stop */ + for (i = 1000; i > 0 && + (AR5K_REG_READ_Q(ah, AR5K_QCU_TXE, queue) != 0); + i--) + udelay(100); + + if (AR5K_REG_READ_Q(ah, AR5K_QCU_TXE, queue)) + ATH5K_DBG(ah, ATH5K_DEBUG_DMA, + "queue %i didn't stop !\n", queue); + + /* Check for pending frames */ + i = 1000; + do { + pending = ath5k_hw_reg_read(ah, + AR5K_QUEUE_STATUS(queue)) & + AR5K_QCU_STS_FRMPENDCNT; + udelay(100); + } while (--i && pending); + + /* For 2413+ order PCU to drop packets using + * QUIET mechanism */ + if (ah->ah_mac_version >= (AR5K_SREV_AR2414 >> 4) && + pending) { + /* Set periodicity and duration */ + ath5k_hw_reg_write(ah, + AR5K_REG_SM(100, AR5K_QUIET_CTL2_QT_PER)| + AR5K_REG_SM(10, AR5K_QUIET_CTL2_QT_DUR), + AR5K_QUIET_CTL2); + + /* Enable quiet period for current TSF */ + ath5k_hw_reg_write(ah, + AR5K_QUIET_CTL1_QT_EN | + AR5K_REG_SM(ath5k_hw_reg_read(ah, + AR5K_TSF_L32_5211) >> 10, + AR5K_QUIET_CTL1_NEXT_QT_TSF), + AR5K_QUIET_CTL1); + + /* Force channel idle high */ + AR5K_REG_ENABLE_BITS(ah, AR5K_DIAG_SW_5211, + AR5K_DIAG_SW_CHANNEL_IDLE_HIGH); + + /* Wait a while and disable mechanism */ + udelay(400); + AR5K_REG_DISABLE_BITS(ah, AR5K_QUIET_CTL1, + AR5K_QUIET_CTL1_QT_EN); + + /* Re-check for pending frames */ + i = 100; + do { + pending = ath5k_hw_reg_read(ah, + AR5K_QUEUE_STATUS(queue)) & + AR5K_QCU_STS_FRMPENDCNT; + udelay(100); + } while (--i && pending); + + AR5K_REG_DISABLE_BITS(ah, AR5K_DIAG_SW_5211, + AR5K_DIAG_SW_CHANNEL_IDLE_HIGH); + + if (pending) + ATH5K_DBG(ah, ATH5K_DEBUG_DMA, + "quiet mechanism didn't work q:%i !\n", + queue); + } + + /* + * Disable DCU early termination + */ + AR5K_REG_DISABLE_BITS(ah, AR5K_QUEUE_MISC(queue), + AR5K_QCU_MISC_DCU_EARLY); + + /* Clear register */ + ath5k_hw_reg_write(ah, 0, AR5K_QCU_TXD); + if (pending) { + ATH5K_DBG(ah, ATH5K_DEBUG_DMA, + "tx dma didn't stop (q:%i, frm:%i) !\n", + queue, pending); + return -EBUSY; + } + } + + /* TODO: Check for success on 5210 else return error */ + return 0; +} + +/** + * ath5k_hw_stop_beacon_queue() - Stop beacon queue + * @ah: The &struct ath5k_hw + * @queue: The queue number + * + * Returns -EIO if queue didn't stop + */ +int +ath5k_hw_stop_beacon_queue(struct ath5k_hw *ah, unsigned int queue) +{ + int ret; + ret = ath5k_hw_stop_tx_dma(ah, queue); + if (ret) { + ATH5K_DBG(ah, ATH5K_DEBUG_DMA, + "beacon queue didn't stop !\n"); + return -EIO; + } + return 0; +} + +/** + * ath5k_hw_get_txdp() - Get TX Descriptor's address for a specific queue + * @ah: The &struct ath5k_hw + * @queue: The hw queue number + * + * Get TX descriptor's address for a specific queue. For 5210 we ignore + * the queue number and use tx queue type since we only have 2 queues. + * We use TXDP0 for normal data queue and TXDP1 for beacon queue. + * For newer chips with QCU/DCU we just read the corresponding TXDP register. + * + * XXX: Is TXDP read and clear ? + */ +u32 +ath5k_hw_get_txdp(struct ath5k_hw *ah, unsigned int queue) +{ + u16 tx_reg; + + AR5K_ASSERT_ENTRY(queue, ah->ah_capabilities.cap_queues.q_tx_num); + + /* + * Get the transmit queue descriptor pointer from the selected queue + */ + /*5210 doesn't have QCU*/ + if (ah->ah_version == AR5K_AR5210) { + switch (ah->ah_txq[queue].tqi_type) { + case AR5K_TX_QUEUE_DATA: + tx_reg = AR5K_NOQCU_TXDP0; + break; + case AR5K_TX_QUEUE_BEACON: + case AR5K_TX_QUEUE_CAB: + tx_reg = AR5K_NOQCU_TXDP1; + break; + default: + return 0xffffffff; + } + } else { + tx_reg = AR5K_QUEUE_TXDP(queue); + } + + return ath5k_hw_reg_read(ah, tx_reg); +} + +/** + * ath5k_hw_set_txdp() - Set TX Descriptor's address for a specific queue + * @ah: The &struct ath5k_hw + * @queue: The hw queue number + * @phys_addr: The physical address + * + * Set TX descriptor's address for a specific queue. For 5210 we ignore + * the queue number and we use tx queue type since we only have 2 queues + * so as above we use TXDP0 for normal data queue and TXDP1 for beacon queue. + * For newer chips with QCU/DCU we just set the corresponding TXDP register. + * Returns -EINVAL if queue type is invalid for 5210 and -EIO if queue is still + * active. + */ +int +ath5k_hw_set_txdp(struct ath5k_hw *ah, unsigned int queue, u32 phys_addr) +{ + u16 tx_reg; + + AR5K_ASSERT_ENTRY(queue, ah->ah_capabilities.cap_queues.q_tx_num); + + /* + * Set the transmit queue descriptor pointer register by type + * on 5210 + */ + if (ah->ah_version == AR5K_AR5210) { + switch (ah->ah_txq[queue].tqi_type) { + case AR5K_TX_QUEUE_DATA: + tx_reg = AR5K_NOQCU_TXDP0; + break; + case AR5K_TX_QUEUE_BEACON: + case AR5K_TX_QUEUE_CAB: + tx_reg = AR5K_NOQCU_TXDP1; + break; + default: + return -EINVAL; + } + } else { + /* + * Set the transmit queue descriptor pointer for + * the selected queue on QCU for 5211+ + * (this won't work if the queue is still active) + */ + if (AR5K_REG_READ_Q(ah, AR5K_QCU_TXE, queue)) + return -EIO; + + tx_reg = AR5K_QUEUE_TXDP(queue); + } + + /* Set descriptor pointer */ + ath5k_hw_reg_write(ah, phys_addr, tx_reg); + + return 0; +} + +/** + * ath5k_hw_update_tx_triglevel() - Update tx trigger level + * @ah: The &struct ath5k_hw + * @increase: Flag to force increase of trigger level + * + * This function increases/decreases the tx trigger level for the tx fifo + * buffer (aka FIFO threshold) that is used to indicate when PCU flushes + * the buffer and transmits its data. Lowering this results sending small + * frames more quickly but can lead to tx underruns, raising it a lot can + * result other problems. Right now we start with the lowest possible + * (64Bytes) and if we get tx underrun we increase it using the increase + * flag. Returns -EIO if we have reached maximum/minimum. + * + * XXX: Link this with tx DMA size ? + * XXX2: Use it to save interrupts ? + */ +int +ath5k_hw_update_tx_triglevel(struct ath5k_hw *ah, bool increase) +{ + u32 trigger_level, imr; + int ret = -EIO; + + /* + * Disable interrupts by setting the mask + */ + imr = ath5k_hw_set_imr(ah, ah->ah_imr & ~AR5K_INT_GLOBAL); + + trigger_level = AR5K_REG_MS(ath5k_hw_reg_read(ah, AR5K_TXCFG), + AR5K_TXCFG_TXFULL); + + if (!increase) { + if (--trigger_level < AR5K_TUNE_MIN_TX_FIFO_THRES) + goto done; + } else + trigger_level += + ((AR5K_TUNE_MAX_TX_FIFO_THRES - trigger_level) / 2); + + /* + * Update trigger level on success + */ + if (ah->ah_version == AR5K_AR5210) + ath5k_hw_reg_write(ah, trigger_level, AR5K_TRIG_LVL); + else + AR5K_REG_WRITE_BITS(ah, AR5K_TXCFG, + AR5K_TXCFG_TXFULL, trigger_level); + + ret = 0; + +done: + /* + * Restore interrupt mask + */ + ath5k_hw_set_imr(ah, imr); + + return ret; +} + + +/*******************\ +* Interrupt masking * +\*******************/ + +/** + * ath5k_hw_is_intr_pending() - Check if we have pending interrupts + * @ah: The &struct ath5k_hw + * + * Check if we have pending interrupts to process. Returns 1 if we + * have pending interrupts and 0 if we haven't. + */ +bool +ath5k_hw_is_intr_pending(struct ath5k_hw *ah) +{ + return ath5k_hw_reg_read(ah, AR5K_INTPEND) == 1 ? 1 : 0; +} + +/** + * ath5k_hw_get_isr() - Get interrupt status + * @ah: The @struct ath5k_hw + * @interrupt_mask: Driver's interrupt mask used to filter out + * interrupts in sw. + * + * This function is used inside our interrupt handler to determine the reason + * for the interrupt by reading Primary Interrupt Status Register. Returns an + * abstract interrupt status mask which is mostly ISR with some uncommon bits + * being mapped on some standard non hw-specific positions + * (check out &ath5k_int). + * + * NOTE: We do write-to-clear, so the active PISR/SISR bits at the time this + * function gets called are cleared on return. + */ +int +ath5k_hw_get_isr(struct ath5k_hw *ah, enum ath5k_int *interrupt_mask) +{ + u32 data = 0; + + /* + * Read interrupt status from Primary Interrupt + * Register. + * + * Note: PISR/SISR Not available on 5210 + */ + if (ah->ah_version == AR5K_AR5210) { + u32 isr = 0; + isr = ath5k_hw_reg_read(ah, AR5K_ISR); + if (unlikely(isr == AR5K_INT_NOCARD)) { + *interrupt_mask = isr; + return -ENODEV; + } + + /* + * Filter out the non-common bits from the interrupt + * status. + */ + *interrupt_mask = (isr & AR5K_INT_COMMON) & ah->ah_imr; + + /* Hanlde INT_FATAL */ + if (unlikely(isr & (AR5K_ISR_SSERR | AR5K_ISR_MCABT + | AR5K_ISR_DPERR))) + *interrupt_mask |= AR5K_INT_FATAL; + + /* + * XXX: BMISS interrupts may occur after association. + * I found this on 5210 code but it needs testing. If this is + * true we should disable them before assoc and re-enable them + * after a successful assoc + some jiffies. + interrupt_mask &= ~AR5K_INT_BMISS; + */ + + data = isr; + } else { + u32 pisr = 0; + u32 pisr_clear = 0; + u32 sisr0 = 0; + u32 sisr1 = 0; + u32 sisr2 = 0; + u32 sisr3 = 0; + u32 sisr4 = 0; + + /* Read PISR and SISRs... */ + pisr = ath5k_hw_reg_read(ah, AR5K_PISR); + if (unlikely(pisr == AR5K_INT_NOCARD)) { + *interrupt_mask = pisr; + return -ENODEV; + } + + sisr0 = ath5k_hw_reg_read(ah, AR5K_SISR0); + sisr1 = ath5k_hw_reg_read(ah, AR5K_SISR1); + sisr2 = ath5k_hw_reg_read(ah, AR5K_SISR2); + sisr3 = ath5k_hw_reg_read(ah, AR5K_SISR3); + sisr4 = ath5k_hw_reg_read(ah, AR5K_SISR4); + + /* + * PISR holds the logical OR of interrupt bits + * from SISR registers: + * + * TXOK and TXDESC -> Logical OR of TXOK and TXDESC + * per-queue bits on SISR0 + * + * TXERR and TXEOL -> Logical OR of TXERR and TXEOL + * per-queue bits on SISR1 + * + * TXURN -> Logical OR of TXURN per-queue bits on SISR2 + * + * HIUERR -> Logical OR of MCABT, SSERR and DPER bits on SISR2 + * + * BCNMISC -> Logical OR of TIM, CAB_END, DTIM_SYNC + * BCN_TIMEOUT, CAB_TIMEOUT and DTIM + * (and TSFOOR ?) bits on SISR2 + * + * QCBRORN and QCBRURN -> Logical OR of QCBRORN and + * QCBRURN per-queue bits on SISR3 + * QTRIG -> Logical OR of QTRIG per-queue bits on SISR4 + * + * If we clean these bits on PISR we 'll also clear all + * related bits from SISRs, e.g. if we write the TXOK bit on + * PISR we 'll clean all TXOK bits from SISR0 so if a new TXOK + * interrupt got fired for another queue while we were reading + * the interrupt registers and we write back the TXOK bit on + * PISR we 'll lose it. So make sure that we don't write back + * on PISR any bits that come from SISRs. Clearing them from + * SISRs will also clear PISR so no need to worry here. + */ + + /* XXX: There seems to be an issue on some cards + * with tx interrupt flags not being updated + * on PISR despite that all Tx interrupt bits + * are cleared on SISRs. Since we handle all + * Tx queues all together it shouldn't be an + * issue if we clear Tx interrupt flags also + * on PISR to avoid that. + */ + pisr_clear = (pisr & ~AR5K_ISR_BITS_FROM_SISRS) | + (pisr & AR5K_INT_TX_ALL); + + /* + * Write to clear them... + * Note: This means that each bit we write back + * to the registers will get cleared, leaving the + * rest unaffected. So this won't affect new interrupts + * we didn't catch while reading/processing, we 'll get + * them next time get_isr gets called. + */ + ath5k_hw_reg_write(ah, sisr0, AR5K_SISR0); + ath5k_hw_reg_write(ah, sisr1, AR5K_SISR1); + ath5k_hw_reg_write(ah, sisr2, AR5K_SISR2); + ath5k_hw_reg_write(ah, sisr3, AR5K_SISR3); + ath5k_hw_reg_write(ah, sisr4, AR5K_SISR4); + ath5k_hw_reg_write(ah, pisr_clear, AR5K_PISR); + /* Flush previous write */ + ath5k_hw_reg_read(ah, AR5K_PISR); + + /* + * Filter out the non-common bits from the interrupt + * status. + */ + *interrupt_mask = (pisr & AR5K_INT_COMMON) & ah->ah_imr; + + + /* We treat TXOK,TXDESC, TXERR and TXEOL + * the same way (schedule the tx tasklet) + * so we track them all together per queue */ + if (pisr & AR5K_ISR_TXOK) + ah->ah_txq_isr_txok_all |= AR5K_REG_MS(sisr0, + AR5K_SISR0_QCU_TXOK); + + if (pisr & AR5K_ISR_TXDESC) + ah->ah_txq_isr_txok_all |= AR5K_REG_MS(sisr0, + AR5K_SISR0_QCU_TXDESC); + + if (pisr & AR5K_ISR_TXERR) + ah->ah_txq_isr_txok_all |= AR5K_REG_MS(sisr1, + AR5K_SISR1_QCU_TXERR); + + if (pisr & AR5K_ISR_TXEOL) + ah->ah_txq_isr_txok_all |= AR5K_REG_MS(sisr1, + AR5K_SISR1_QCU_TXEOL); + + /* Currently this is not much useful since we treat + * all queues the same way if we get a TXURN (update + * tx trigger level) but we might need it later on*/ + if (pisr & AR5K_ISR_TXURN) + ah->ah_txq_isr_txurn |= AR5K_REG_MS(sisr2, + AR5K_SISR2_QCU_TXURN); + + /* Misc Beacon related interrupts */ + + /* For AR5211 */ + if (pisr & AR5K_ISR_TIM) + *interrupt_mask |= AR5K_INT_TIM; + + /* For AR5212+ */ + if (pisr & AR5K_ISR_BCNMISC) { + if (sisr2 & AR5K_SISR2_TIM) + *interrupt_mask |= AR5K_INT_TIM; + if (sisr2 & AR5K_SISR2_DTIM) + *interrupt_mask |= AR5K_INT_DTIM; + if (sisr2 & AR5K_SISR2_DTIM_SYNC) + *interrupt_mask |= AR5K_INT_DTIM_SYNC; + if (sisr2 & AR5K_SISR2_BCN_TIMEOUT) + *interrupt_mask |= AR5K_INT_BCN_TIMEOUT; + if (sisr2 & AR5K_SISR2_CAB_TIMEOUT) + *interrupt_mask |= AR5K_INT_CAB_TIMEOUT; + } + + /* Below interrupts are unlikely to happen */ + + /* HIU = Host Interface Unit (PCI etc) + * Can be one of MCABT, SSERR, DPERR from SISR2 */ + if (unlikely(pisr & (AR5K_ISR_HIUERR))) + *interrupt_mask |= AR5K_INT_FATAL; + + /*Beacon Not Ready*/ + if (unlikely(pisr & (AR5K_ISR_BNR))) + *interrupt_mask |= AR5K_INT_BNR; + + /* A queue got CBR overrun */ + if (unlikely(pisr & (AR5K_ISR_QCBRORN))) { + *interrupt_mask |= AR5K_INT_QCBRORN; + ah->ah_txq_isr_qcborn |= AR5K_REG_MS(sisr3, + AR5K_SISR3_QCBRORN); + } + + /* A queue got CBR underrun */ + if (unlikely(pisr & (AR5K_ISR_QCBRURN))) { + *interrupt_mask |= AR5K_INT_QCBRURN; + ah->ah_txq_isr_qcburn |= AR5K_REG_MS(sisr3, + AR5K_SISR3_QCBRURN); + } + + /* A queue got triggered */ + if (unlikely(pisr & (AR5K_ISR_QTRIG))) { + *interrupt_mask |= AR5K_INT_QTRIG; + ah->ah_txq_isr_qtrig |= AR5K_REG_MS(sisr4, + AR5K_SISR4_QTRIG); + } + + data = pisr; + } + + /* + * In case we didn't handle anything, + * print the register value. + */ + if (unlikely(*interrupt_mask == 0 && net_ratelimit())) + ATH5K_PRINTF("ISR: 0x%08x IMR: 0x%08x\n", data, ah->ah_imr); + + return 0; +} + +/** + * ath5k_hw_set_imr() - Set interrupt mask + * @ah: The &struct ath5k_hw + * @new_mask: The new interrupt mask to be set + * + * Set the interrupt mask in hw to save interrupts. We do that by mapping + * ath5k_int bits to hw-specific bits to remove abstraction and writing + * Interrupt Mask Register. + */ +enum ath5k_int +ath5k_hw_set_imr(struct ath5k_hw *ah, enum ath5k_int new_mask) +{ + enum ath5k_int old_mask, int_mask; + + old_mask = ah->ah_imr; + + /* + * Disable card interrupts to prevent any race conditions + * (they will be re-enabled afterwards if AR5K_INT GLOBAL + * is set again on the new mask). + */ + if (old_mask & AR5K_INT_GLOBAL) { + ath5k_hw_reg_write(ah, AR5K_IER_DISABLE, AR5K_IER); + ath5k_hw_reg_read(ah, AR5K_IER); + } + + /* + * Add additional, chipset-dependent interrupt mask flags + * and write them to the IMR (interrupt mask register). + */ + int_mask = new_mask & AR5K_INT_COMMON; + + if (ah->ah_version != AR5K_AR5210) { + /* Preserve per queue TXURN interrupt mask */ + u32 simr2 = ath5k_hw_reg_read(ah, AR5K_SIMR2) + & AR5K_SIMR2_QCU_TXURN; + + /* Fatal interrupt abstraction for 5211+ */ + if (new_mask & AR5K_INT_FATAL) { + int_mask |= AR5K_IMR_HIUERR; + simr2 |= (AR5K_SIMR2_MCABT | AR5K_SIMR2_SSERR + | AR5K_SIMR2_DPERR); + } + + /* Misc beacon related interrupts */ + if (new_mask & AR5K_INT_TIM) + int_mask |= AR5K_IMR_TIM; + + if (new_mask & AR5K_INT_TIM) + simr2 |= AR5K_SISR2_TIM; + if (new_mask & AR5K_INT_DTIM) + simr2 |= AR5K_SISR2_DTIM; + if (new_mask & AR5K_INT_DTIM_SYNC) + simr2 |= AR5K_SISR2_DTIM_SYNC; + if (new_mask & AR5K_INT_BCN_TIMEOUT) + simr2 |= AR5K_SISR2_BCN_TIMEOUT; + if (new_mask & AR5K_INT_CAB_TIMEOUT) + simr2 |= AR5K_SISR2_CAB_TIMEOUT; + + /*Beacon Not Ready*/ + if (new_mask & AR5K_INT_BNR) + int_mask |= AR5K_INT_BNR; + + /* Note: Per queue interrupt masks + * are set via ath5k_hw_reset_tx_queue() (qcu.c) */ + ath5k_hw_reg_write(ah, int_mask, AR5K_PIMR); + ath5k_hw_reg_write(ah, simr2, AR5K_SIMR2); + + } else { + /* Fatal interrupt abstraction for 5210 */ + if (new_mask & AR5K_INT_FATAL) + int_mask |= (AR5K_IMR_SSERR | AR5K_IMR_MCABT + | AR5K_IMR_HIUERR | AR5K_IMR_DPERR); + + /* Only common interrupts left for 5210 (no SIMRs) */ + ath5k_hw_reg_write(ah, int_mask, AR5K_IMR); + } + + /* If RXNOFRM interrupt is masked disable it + * by setting AR5K_RXNOFRM to zero */ + if (!(new_mask & AR5K_INT_RXNOFRM)) + ath5k_hw_reg_write(ah, 0, AR5K_RXNOFRM); + + /* Store new interrupt mask */ + ah->ah_imr = new_mask; + + /* ..re-enable interrupts if AR5K_INT_GLOBAL is set */ + if (new_mask & AR5K_INT_GLOBAL) { + ath5k_hw_reg_write(ah, AR5K_IER_ENABLE, AR5K_IER); + ath5k_hw_reg_read(ah, AR5K_IER); + } + + return old_mask; +} + + +/********************\ + Init/Stop functions +\********************/ + +/** + * ath5k_hw_dma_init() - Initialize DMA unit + * @ah: The &struct ath5k_hw + * + * Set DMA size and pre-enable interrupts + * (driver handles tx/rx buffer setup and + * dma start/stop) + * + * XXX: Save/restore RXDP/TXDP registers ? + */ +void +ath5k_hw_dma_init(struct ath5k_hw *ah) +{ + /* + * Set Rx/Tx DMA Configuration + * + * Set standard DMA size (128). Note that + * a DMA size of 512 causes rx overruns and tx errors + * on pci-e cards (tested on 5424 but since rx overruns + * also occur on 5416/5418 with madwifi we set 128 + * for all PCI-E cards to be safe). + * + * XXX: need to check 5210 for this + * TODO: Check out tx trigger level, it's always 64 on dumps but I + * guess we can tweak it and see how it goes ;-) + */ + if (ah->ah_version != AR5K_AR5210) { + AR5K_REG_WRITE_BITS(ah, AR5K_TXCFG, + AR5K_TXCFG_SDMAMR, AR5K_DMASIZE_128B); + AR5K_REG_WRITE_BITS(ah, AR5K_RXCFG, + AR5K_RXCFG_SDMAMW, AR5K_DMASIZE_128B); + } + + /* Pre-enable interrupts on 5211/5212*/ + if (ah->ah_version != AR5K_AR5210) + ath5k_hw_set_imr(ah, ah->ah_imr); + +} + +/** + * ath5k_hw_dma_stop() - stop DMA unit + * @ah: The &struct ath5k_hw + * + * Stop tx/rx DMA and interrupts. Returns + * -EBUSY if tx or rx dma failed to stop. + * + * XXX: Sometimes DMA unit hangs and we have + * stuck frames on tx queues, only a reset + * can fix that. + */ +int +ath5k_hw_dma_stop(struct ath5k_hw *ah) +{ + int i, qmax, err; + err = 0; + + /* Disable interrupts */ + ath5k_hw_set_imr(ah, 0); + + /* Stop rx dma */ + err = ath5k_hw_stop_rx_dma(ah); + if (err) + return err; + + /* Clear any pending interrupts + * and disable tx dma */ + if (ah->ah_version != AR5K_AR5210) { + ath5k_hw_reg_write(ah, 0xffffffff, AR5K_PISR); + qmax = AR5K_NUM_TX_QUEUES; + } else { + /* PISR/SISR Not available on 5210 */ + ath5k_hw_reg_read(ah, AR5K_ISR); + qmax = AR5K_NUM_TX_QUEUES_NOQCU; + } + + for (i = 0; i < qmax; i++) { + err = ath5k_hw_stop_tx_dma(ah, i); + /* -EINVAL -> queue inactive */ + if (err && err != -EINVAL) + return err; + } + + return 0; +} |