diff options
Diffstat (limited to 'drivers/net/wireless/intel/iwlwifi/dvm/power.c')
-rw-r--r-- | drivers/net/wireless/intel/iwlwifi/dvm/power.c | 395 |
1 files changed, 395 insertions, 0 deletions
diff --git a/drivers/net/wireless/intel/iwlwifi/dvm/power.c b/drivers/net/wireless/intel/iwlwifi/dvm/power.c new file mode 100644 index 000000000..0ad557c89 --- /dev/null +++ b/drivers/net/wireless/intel/iwlwifi/dvm/power.c @@ -0,0 +1,395 @@ +/****************************************************************************** + * + * Copyright(c) 2007 - 2014 Intel Corporation. All rights reserved. + * + * Portions of this file are derived from the ipw3945 project, as well + * as portions of the ieee80211 subsystem header files. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA + * + * The full GNU General Public License is included in this distribution in the + * file called LICENSE. + * + * Contact Information: + * Intel Linux Wireless <linuxwifi@intel.com> + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + *****************************************************************************/ + + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <net/mac80211.h> +#include "iwl-io.h" +#include "iwl-debug.h" +#include "iwl-trans.h" +#include "iwl-modparams.h" +#include "dev.h" +#include "agn.h" +#include "commands.h" +#include "power.h" + +static bool force_cam = true; +module_param(force_cam, bool, 0644); +MODULE_PARM_DESC(force_cam, "force continuously aware mode (no power saving at all)"); + +/* + * Setting power level allows the card to go to sleep when not busy. + * + * We calculate a sleep command based on the required latency, which + * we get from mac80211. In order to handle thermal throttling, we can + * also use pre-defined power levels. + */ + +/* + * This defines the old power levels. They are still used by default + * (level 1) and for thermal throttle (levels 3 through 5) + */ + +struct iwl_power_vec_entry { + struct iwl_powertable_cmd cmd; + u8 no_dtim; /* number of skip dtim */ +}; + +#define IWL_DTIM_RANGE_0_MAX 2 +#define IWL_DTIM_RANGE_1_MAX 10 + +#define NOSLP cpu_to_le16(0), 0, 0 +#define SLP IWL_POWER_DRIVER_ALLOW_SLEEP_MSK, 0, 0 +#define ASLP (IWL_POWER_POWER_SAVE_ENA_MSK | \ + IWL_POWER_POWER_MANAGEMENT_ENA_MSK | \ + IWL_POWER_ADVANCE_PM_ENA_MSK) +#define ASLP_TOUT(T) cpu_to_le32(T) +#define TU_TO_USEC 1024 +#define SLP_TOUT(T) cpu_to_le32((T) * TU_TO_USEC) +#define SLP_VEC(X0, X1, X2, X3, X4) {cpu_to_le32(X0), \ + cpu_to_le32(X1), \ + cpu_to_le32(X2), \ + cpu_to_le32(X3), \ + cpu_to_le32(X4)} +/* default power management (not Tx power) table values */ +/* for DTIM period 0 through IWL_DTIM_RANGE_0_MAX */ +/* DTIM 0 - 2 */ +static const struct iwl_power_vec_entry range_0[IWL_POWER_NUM] = { + {{SLP, SLP_TOUT(200), SLP_TOUT(500), SLP_VEC(1, 1, 2, 2, 0xFF)}, 0}, + {{SLP, SLP_TOUT(200), SLP_TOUT(300), SLP_VEC(1, 2, 2, 2, 0xFF)}, 0}, + {{SLP, SLP_TOUT(50), SLP_TOUT(100), SLP_VEC(2, 2, 2, 2, 0xFF)}, 0}, + {{SLP, SLP_TOUT(50), SLP_TOUT(25), SLP_VEC(2, 2, 4, 4, 0xFF)}, 1}, + {{SLP, SLP_TOUT(25), SLP_TOUT(25), SLP_VEC(2, 2, 4, 6, 0xFF)}, 2} +}; + + +/* for DTIM period IWL_DTIM_RANGE_0_MAX + 1 through IWL_DTIM_RANGE_1_MAX */ +/* DTIM 3 - 10 */ +static const struct iwl_power_vec_entry range_1[IWL_POWER_NUM] = { + {{SLP, SLP_TOUT(200), SLP_TOUT(500), SLP_VEC(1, 2, 3, 4, 4)}, 0}, + {{SLP, SLP_TOUT(200), SLP_TOUT(300), SLP_VEC(1, 2, 3, 4, 7)}, 0}, + {{SLP, SLP_TOUT(50), SLP_TOUT(100), SLP_VEC(2, 4, 6, 7, 9)}, 0}, + {{SLP, SLP_TOUT(50), SLP_TOUT(25), SLP_VEC(2, 4, 6, 9, 10)}, 1}, + {{SLP, SLP_TOUT(25), SLP_TOUT(25), SLP_VEC(2, 4, 6, 10, 10)}, 2} +}; + +/* for DTIM period > IWL_DTIM_RANGE_1_MAX */ +/* DTIM 11 - */ +static const struct iwl_power_vec_entry range_2[IWL_POWER_NUM] = { + {{SLP, SLP_TOUT(200), SLP_TOUT(500), SLP_VEC(1, 2, 3, 4, 0xFF)}, 0}, + {{SLP, SLP_TOUT(200), SLP_TOUT(300), SLP_VEC(2, 4, 6, 7, 0xFF)}, 0}, + {{SLP, SLP_TOUT(50), SLP_TOUT(100), SLP_VEC(2, 7, 9, 9, 0xFF)}, 0}, + {{SLP, SLP_TOUT(50), SLP_TOUT(25), SLP_VEC(2, 7, 9, 9, 0xFF)}, 0}, + {{SLP, SLP_TOUT(25), SLP_TOUT(25), SLP_VEC(4, 7, 10, 10, 0xFF)}, 0} +}; + +/* advance power management */ +/* DTIM 0 - 2 */ +static const struct iwl_power_vec_entry apm_range_0[IWL_POWER_NUM] = { + {{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50), + SLP_VEC(1, 2, 4, 6, 0xFF), 0}, 0}, + {{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50), + SLP_VEC(1, 2, 4, 6, 0xFF), 0}, 0}, + {{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50), + SLP_VEC(1, 2, 4, 6, 0xFF), 0}, 0}, + {{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50), + SLP_VEC(1, 2, 4, 6, 0xFF), 0}, 0}, + {{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50), + SLP_VEC(1, 2, 6, 8, 0xFF), ASLP_TOUT(2)}, 2} +}; + + +/* for DTIM period IWL_DTIM_RANGE_0_MAX + 1 through IWL_DTIM_RANGE_1_MAX */ +/* DTIM 3 - 10 */ +static const struct iwl_power_vec_entry apm_range_1[IWL_POWER_NUM] = { + {{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50), + SLP_VEC(1, 2, 4, 6, 0xFF), 0}, 0}, + {{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50), + SLP_VEC(1, 2, 4, 6, 0xFF), 0}, 0}, + {{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50), + SLP_VEC(1, 2, 4, 6, 0xFF), 0}, 0}, + {{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50), + SLP_VEC(1, 2, 4, 6, 0xFF), 0}, 0}, + {{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50), + SLP_VEC(1, 2, 6, 8, 0xFF), 0}, 2} +}; + +/* for DTIM period > IWL_DTIM_RANGE_1_MAX */ +/* DTIM 11 - */ +static const struct iwl_power_vec_entry apm_range_2[IWL_POWER_NUM] = { + {{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50), + SLP_VEC(1, 2, 4, 6, 0xFF), 0}, 0}, + {{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50), + SLP_VEC(1, 2, 4, 6, 0xFF), 0}, 0}, + {{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50), + SLP_VEC(1, 2, 4, 6, 0xFF), 0}, 0}, + {{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50), + SLP_VEC(1, 2, 4, 6, 0xFF), 0}, 0}, + {{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50), + SLP_VEC(1, 2, 6, 8, 0xFF), ASLP_TOUT(2)}, 2} +}; + +static void iwl_static_sleep_cmd(struct iwl_priv *priv, + struct iwl_powertable_cmd *cmd, + enum iwl_power_level lvl, int period) +{ + const struct iwl_power_vec_entry *table; + int max_sleep[IWL_POWER_VEC_SIZE] = { 0 }; + int i; + u8 skip; + u32 slp_itrvl; + + if (priv->lib->adv_pm) { + table = apm_range_2; + if (period <= IWL_DTIM_RANGE_1_MAX) + table = apm_range_1; + if (period <= IWL_DTIM_RANGE_0_MAX) + table = apm_range_0; + } else { + table = range_2; + if (period <= IWL_DTIM_RANGE_1_MAX) + table = range_1; + if (period <= IWL_DTIM_RANGE_0_MAX) + table = range_0; + } + + if (WARN_ON(lvl < 0 || lvl >= IWL_POWER_NUM)) + memset(cmd, 0, sizeof(*cmd)); + else + *cmd = table[lvl].cmd; + + if (period == 0) { + skip = 0; + period = 1; + for (i = 0; i < IWL_POWER_VEC_SIZE; i++) + max_sleep[i] = 1; + + } else { + skip = table[lvl].no_dtim; + for (i = 0; i < IWL_POWER_VEC_SIZE; i++) + max_sleep[i] = le32_to_cpu(cmd->sleep_interval[i]); + max_sleep[IWL_POWER_VEC_SIZE - 1] = skip + 1; + } + + slp_itrvl = le32_to_cpu(cmd->sleep_interval[IWL_POWER_VEC_SIZE - 1]); + /* figure out the listen interval based on dtim period and skip */ + if (slp_itrvl == 0xFF) + cmd->sleep_interval[IWL_POWER_VEC_SIZE - 1] = + cpu_to_le32(period * (skip + 1)); + + slp_itrvl = le32_to_cpu(cmd->sleep_interval[IWL_POWER_VEC_SIZE - 1]); + if (slp_itrvl > period) + cmd->sleep_interval[IWL_POWER_VEC_SIZE - 1] = + cpu_to_le32((slp_itrvl / period) * period); + + if (skip) + cmd->flags |= IWL_POWER_SLEEP_OVER_DTIM_MSK; + else + cmd->flags &= ~IWL_POWER_SLEEP_OVER_DTIM_MSK; + + if (priv->cfg->base_params->shadow_reg_enable) + cmd->flags |= IWL_POWER_SHADOW_REG_ENA; + else + cmd->flags &= ~IWL_POWER_SHADOW_REG_ENA; + + if (iwl_advanced_bt_coexist(priv)) { + if (!priv->lib->bt_params->bt_sco_disable) + cmd->flags |= IWL_POWER_BT_SCO_ENA; + else + cmd->flags &= ~IWL_POWER_BT_SCO_ENA; + } + + + slp_itrvl = le32_to_cpu(cmd->sleep_interval[IWL_POWER_VEC_SIZE - 1]); + if (slp_itrvl > IWL_CONN_MAX_LISTEN_INTERVAL) + cmd->sleep_interval[IWL_POWER_VEC_SIZE - 1] = + cpu_to_le32(IWL_CONN_MAX_LISTEN_INTERVAL); + + /* enforce max sleep interval */ + for (i = IWL_POWER_VEC_SIZE - 1; i >= 0 ; i--) { + if (le32_to_cpu(cmd->sleep_interval[i]) > + (max_sleep[i] * period)) + cmd->sleep_interval[i] = + cpu_to_le32(max_sleep[i] * period); + if (i != (IWL_POWER_VEC_SIZE - 1)) { + if (le32_to_cpu(cmd->sleep_interval[i]) > + le32_to_cpu(cmd->sleep_interval[i+1])) + cmd->sleep_interval[i] = + cmd->sleep_interval[i+1]; + } + } + + if (priv->power_data.bus_pm) + cmd->flags |= IWL_POWER_PCI_PM_MSK; + else + cmd->flags &= ~IWL_POWER_PCI_PM_MSK; + + IWL_DEBUG_POWER(priv, "numSkipDtim = %u, dtimPeriod = %d\n", + skip, period); + /* The power level here is 0-4 (used as array index), but user expects + to see 1-5 (according to spec). */ + IWL_DEBUG_POWER(priv, "Sleep command for index %d\n", lvl + 1); +} + +static void iwl_power_sleep_cam_cmd(struct iwl_priv *priv, + struct iwl_powertable_cmd *cmd) +{ + memset(cmd, 0, sizeof(*cmd)); + + if (priv->power_data.bus_pm) + cmd->flags |= IWL_POWER_PCI_PM_MSK; + + IWL_DEBUG_POWER(priv, "Sleep command for CAM\n"); +} + +static int iwl_set_power(struct iwl_priv *priv, struct iwl_powertable_cmd *cmd) +{ + IWL_DEBUG_POWER(priv, "Sending power/sleep command\n"); + IWL_DEBUG_POWER(priv, "Flags value = 0x%08X\n", cmd->flags); + IWL_DEBUG_POWER(priv, "Tx timeout = %u\n", le32_to_cpu(cmd->tx_data_timeout)); + IWL_DEBUG_POWER(priv, "Rx timeout = %u\n", le32_to_cpu(cmd->rx_data_timeout)); + IWL_DEBUG_POWER(priv, "Sleep interval vector = { %d , %d , %d , %d , %d }\n", + le32_to_cpu(cmd->sleep_interval[0]), + le32_to_cpu(cmd->sleep_interval[1]), + le32_to_cpu(cmd->sleep_interval[2]), + le32_to_cpu(cmd->sleep_interval[3]), + le32_to_cpu(cmd->sleep_interval[4])); + + return iwl_dvm_send_cmd_pdu(priv, POWER_TABLE_CMD, 0, + sizeof(struct iwl_powertable_cmd), cmd); +} + +static void iwl_power_build_cmd(struct iwl_priv *priv, + struct iwl_powertable_cmd *cmd) +{ + bool enabled = priv->hw->conf.flags & IEEE80211_CONF_PS; + int dtimper; + + if (force_cam) { + iwl_power_sleep_cam_cmd(priv, cmd); + return; + } + + dtimper = priv->hw->conf.ps_dtim_period ?: 1; + + if (priv->wowlan) + iwl_static_sleep_cmd(priv, cmd, IWL_POWER_INDEX_5, dtimper); + else if (!priv->lib->no_idle_support && + priv->hw->conf.flags & IEEE80211_CONF_IDLE) + iwl_static_sleep_cmd(priv, cmd, IWL_POWER_INDEX_5, 20); + else if (iwl_tt_is_low_power_state(priv)) { + /* in thermal throttling low power state */ + iwl_static_sleep_cmd(priv, cmd, + iwl_tt_current_power_mode(priv), dtimper); + } else if (!enabled) + iwl_power_sleep_cam_cmd(priv, cmd); + else if (priv->power_data.debug_sleep_level_override >= 0) + iwl_static_sleep_cmd(priv, cmd, + priv->power_data.debug_sleep_level_override, + dtimper); + else { + /* Note that the user parameter is 1-5 (according to spec), + but we pass 0-4 because it acts as an array index. */ + if (iwlwifi_mod_params.power_level > IWL_POWER_INDEX_1 && + iwlwifi_mod_params.power_level <= IWL_POWER_NUM) + iwl_static_sleep_cmd(priv, cmd, + iwlwifi_mod_params.power_level - 1, dtimper); + else + iwl_static_sleep_cmd(priv, cmd, + IWL_POWER_INDEX_1, dtimper); + } +} + +int iwl_power_set_mode(struct iwl_priv *priv, struct iwl_powertable_cmd *cmd, + bool force) +{ + int ret; + bool update_chains; + + lockdep_assert_held(&priv->mutex); + + /* Don't update the RX chain when chain noise calibration is running */ + update_chains = priv->chain_noise_data.state == IWL_CHAIN_NOISE_DONE || + priv->chain_noise_data.state == IWL_CHAIN_NOISE_ALIVE; + + if (!memcmp(&priv->power_data.sleep_cmd, cmd, sizeof(*cmd)) && !force) + return 0; + + if (!iwl_is_ready_rf(priv)) + return -EIO; + + /* scan complete use sleep_power_next, need to be updated */ + memcpy(&priv->power_data.sleep_cmd_next, cmd, sizeof(*cmd)); + if (test_bit(STATUS_SCANNING, &priv->status) && !force) { + IWL_DEBUG_INFO(priv, "Defer power set mode while scanning\n"); + return 0; + } + + if (cmd->flags & IWL_POWER_DRIVER_ALLOW_SLEEP_MSK) + iwl_dvm_set_pmi(priv, true); + + ret = iwl_set_power(priv, cmd); + if (!ret) { + if (!(cmd->flags & IWL_POWER_DRIVER_ALLOW_SLEEP_MSK)) + iwl_dvm_set_pmi(priv, false); + + if (update_chains) + iwl_update_chain_flags(priv); + else + IWL_DEBUG_POWER(priv, + "Cannot update the power, chain noise " + "calibration running: %d\n", + priv->chain_noise_data.state); + + memcpy(&priv->power_data.sleep_cmd, cmd, sizeof(*cmd)); + } else + IWL_ERR(priv, "set power fail, ret = %d\n", ret); + + return ret; +} + +int iwl_power_update_mode(struct iwl_priv *priv, bool force) +{ + struct iwl_powertable_cmd cmd; + + iwl_power_build_cmd(priv, &cmd); + return iwl_power_set_mode(priv, &cmd, force); +} + +/* initialize to default */ +void iwl_power_initialize(struct iwl_priv *priv) +{ + priv->power_data.bus_pm = priv->trans->pm_support; + + priv->power_data.debug_sleep_level_override = -1; + + memset(&priv->power_data.sleep_cmd, 0, + sizeof(priv->power_data.sleep_cmd)); +} |