summaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless/intersil/hostap/hostap_plx.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/wireless/intersil/hostap/hostap_plx.c')
-rw-r--r--drivers/net/wireless/intersil/hostap/hostap_plx.c618
1 files changed, 618 insertions, 0 deletions
diff --git a/drivers/net/wireless/intersil/hostap/hostap_plx.c b/drivers/net/wireless/intersil/hostap/hostap_plx.c
new file mode 100644
index 000000000..4901a99c6
--- /dev/null
+++ b/drivers/net/wireless/intersil/hostap/hostap_plx.c
@@ -0,0 +1,618 @@
+#define PRISM2_PLX
+
+/* Host AP driver's support for PC Cards on PCI adapters using PLX9052 is
+ * based on:
+ * - Host AP driver patch from james@madingley.org
+ * - linux-wlan-ng driver, Copyright (C) AbsoluteValue Systems, Inc.
+ */
+
+
+#include <linux/module.h>
+#include <linux/if.h>
+#include <linux/skbuff.h>
+#include <linux/netdevice.h>
+#include <linux/slab.h>
+#include <linux/workqueue.h>
+#include <linux/wireless.h>
+#include <net/iw_handler.h>
+
+#include <linux/ioport.h>
+#include <linux/pci.h>
+#include <asm/io.h>
+
+#include "hostap_wlan.h"
+
+
+static char *dev_info = "hostap_plx";
+
+
+MODULE_AUTHOR("Jouni Malinen");
+MODULE_DESCRIPTION("Support for Intersil Prism2-based 802.11 wireless LAN "
+ "cards (PLX).");
+MODULE_SUPPORTED_DEVICE("Intersil Prism2-based WLAN cards (PLX)");
+MODULE_LICENSE("GPL");
+
+
+static int ignore_cis;
+module_param(ignore_cis, int, 0444);
+MODULE_PARM_DESC(ignore_cis, "Do not verify manfid information in CIS");
+
+
+/* struct local_info::hw_priv */
+struct hostap_plx_priv {
+ void __iomem *attr_mem;
+ unsigned int cor_offset;
+};
+
+
+#define PLX_MIN_ATTR_LEN 512 /* at least 2 x 256 is needed for CIS */
+#define COR_SRESET 0x80
+#define COR_LEVLREQ 0x40
+#define COR_ENABLE_FUNC 0x01
+/* PCI Configuration Registers */
+#define PLX_PCIIPR 0x3d /* PCI Interrupt Pin */
+/* Local Configuration Registers */
+#define PLX_INTCSR 0x4c /* Interrupt Control/Status Register */
+#define PLX_INTCSR_PCI_INTEN BIT(6) /* PCI Interrupt Enable */
+#define PLX_CNTRL 0x50
+#define PLX_CNTRL_SERIAL_EEPROM_PRESENT BIT(28)
+
+
+#define PLXDEV(vendor,dev,str) { vendor, dev, PCI_ANY_ID, PCI_ANY_ID }
+
+static const struct pci_device_id prism2_plx_id_table[] = {
+ PLXDEV(0x10b7, 0x7770, "3Com AirConnect PCI 777A"),
+ PLXDEV(0x111a, 0x1023, "Siemens SpeedStream SS1023"),
+ PLXDEV(0x126c, 0x8030, "Nortel emobility"),
+ PLXDEV(0x1562, 0x0001, "Symbol LA-4123"),
+ PLXDEV(0x1385, 0x4100, "Netgear MA301"),
+ PLXDEV(0x15e8, 0x0130, "National Datacomm NCP130 (PLX9052)"),
+ PLXDEV(0x15e8, 0x0131, "National Datacomm NCP130 (TMD7160)"),
+ PLXDEV(0x1638, 0x1100, "Eumitcom WL11000"),
+ PLXDEV(0x16ab, 0x1100, "Global Sun Tech GL24110P"),
+ PLXDEV(0x16ab, 0x1101, "Global Sun Tech GL24110P (?)"),
+ PLXDEV(0x16ab, 0x1102, "Linksys WPC11 with WDT11"),
+ PLXDEV(0x16ab, 0x1103, "Longshine 8031"),
+ PLXDEV(0x16ec, 0x3685, "US Robotics USR2415"),
+ PLXDEV(0xec80, 0xec00, "Belkin F5D6000"),
+ { 0 }
+};
+
+
+/* Array of known Prism2/2.5 PC Card manufactured ids. If your card's manfid
+ * is not listed here, you will need to add it here to get the driver
+ * initialized. */
+static struct prism2_plx_manfid {
+ u16 manfid1, manfid2;
+} prism2_plx_known_manfids[] = {
+ { 0x000b, 0x7110 } /* D-Link DWL-650 Rev. P1 */,
+ { 0x000b, 0x7300 } /* Philips 802.11b WLAN PCMCIA */,
+ { 0x0101, 0x0777 } /* 3Com AirConnect PCI 777A */,
+ { 0x0126, 0x8000 } /* Proxim RangeLAN */,
+ { 0x0138, 0x0002 } /* Compaq WL100 */,
+ { 0x0156, 0x0002 } /* Intersil Prism II Ref. Design (and others) */,
+ { 0x026f, 0x030b } /* Buffalo WLI-CF-S11G */,
+ { 0x0274, 0x1612 } /* Linksys WPC11 Ver 2.5 */,
+ { 0x0274, 0x1613 } /* Linksys WPC11 Ver 3 */,
+ { 0x028a, 0x0002 } /* D-Link DRC-650 */,
+ { 0x0250, 0x0002 } /* Samsung SWL2000-N */,
+ { 0xc250, 0x0002 } /* EMTAC A2424i */,
+ { 0xd601, 0x0002 } /* Z-Com XI300 */,
+ { 0xd601, 0x0005 } /* Zcomax XI-325H 200mW */,
+ { 0, 0}
+};
+
+
+#ifdef PRISM2_IO_DEBUG
+
+static inline void hfa384x_outb_debug(struct net_device *dev, int a, u8 v)
+{
+ struct hostap_interface *iface;
+ local_info_t *local;
+ unsigned long flags;
+
+ iface = netdev_priv(dev);
+ local = iface->local;
+
+ spin_lock_irqsave(&local->lock, flags);
+ prism2_io_debug_add(dev, PRISM2_IO_DEBUG_CMD_OUTB, a, v);
+ outb(v, dev->base_addr + a);
+ spin_unlock_irqrestore(&local->lock, flags);
+}
+
+static inline u8 hfa384x_inb_debug(struct net_device *dev, int a)
+{
+ struct hostap_interface *iface;
+ local_info_t *local;
+ unsigned long flags;
+ u8 v;
+
+ iface = netdev_priv(dev);
+ local = iface->local;
+
+ spin_lock_irqsave(&local->lock, flags);
+ v = inb(dev->base_addr + a);
+ prism2_io_debug_add(dev, PRISM2_IO_DEBUG_CMD_INB, a, v);
+ spin_unlock_irqrestore(&local->lock, flags);
+ return v;
+}
+
+static inline void hfa384x_outw_debug(struct net_device *dev, int a, u16 v)
+{
+ struct hostap_interface *iface;
+ local_info_t *local;
+ unsigned long flags;
+
+ iface = netdev_priv(dev);
+ local = iface->local;
+
+ spin_lock_irqsave(&local->lock, flags);
+ prism2_io_debug_add(dev, PRISM2_IO_DEBUG_CMD_OUTW, a, v);
+ outw(v, dev->base_addr + a);
+ spin_unlock_irqrestore(&local->lock, flags);
+}
+
+static inline u16 hfa384x_inw_debug(struct net_device *dev, int a)
+{
+ struct hostap_interface *iface;
+ local_info_t *local;
+ unsigned long flags;
+ u16 v;
+
+ iface = netdev_priv(dev);
+ local = iface->local;
+
+ spin_lock_irqsave(&local->lock, flags);
+ v = inw(dev->base_addr + a);
+ prism2_io_debug_add(dev, PRISM2_IO_DEBUG_CMD_INW, a, v);
+ spin_unlock_irqrestore(&local->lock, flags);
+ return v;
+}
+
+static inline void hfa384x_outsw_debug(struct net_device *dev, int a,
+ u8 *buf, int wc)
+{
+ struct hostap_interface *iface;
+ local_info_t *local;
+ unsigned long flags;
+
+ iface = netdev_priv(dev);
+ local = iface->local;
+
+ spin_lock_irqsave(&local->lock, flags);
+ prism2_io_debug_add(dev, PRISM2_IO_DEBUG_CMD_OUTSW, a, wc);
+ outsw(dev->base_addr + a, buf, wc);
+ spin_unlock_irqrestore(&local->lock, flags);
+}
+
+static inline void hfa384x_insw_debug(struct net_device *dev, int a,
+ u8 *buf, int wc)
+{
+ struct hostap_interface *iface;
+ local_info_t *local;
+ unsigned long flags;
+
+ iface = netdev_priv(dev);
+ local = iface->local;
+
+ spin_lock_irqsave(&local->lock, flags);
+ prism2_io_debug_add(dev, PRISM2_IO_DEBUG_CMD_INSW, a, wc);
+ insw(dev->base_addr + a, buf, wc);
+ spin_unlock_irqrestore(&local->lock, flags);
+}
+
+#define HFA384X_OUTB(v,a) hfa384x_outb_debug(dev, (a), (v))
+#define HFA384X_INB(a) hfa384x_inb_debug(dev, (a))
+#define HFA384X_OUTW(v,a) hfa384x_outw_debug(dev, (a), (v))
+#define HFA384X_INW(a) hfa384x_inw_debug(dev, (a))
+#define HFA384X_OUTSW(a, buf, wc) hfa384x_outsw_debug(dev, (a), (buf), (wc))
+#define HFA384X_INSW(a, buf, wc) hfa384x_insw_debug(dev, (a), (buf), (wc))
+
+#else /* PRISM2_IO_DEBUG */
+
+#define HFA384X_OUTB(v,a) outb((v), dev->base_addr + (a))
+#define HFA384X_INB(a) inb(dev->base_addr + (a))
+#define HFA384X_OUTW(v,a) outw((v), dev->base_addr + (a))
+#define HFA384X_INW(a) inw(dev->base_addr + (a))
+#define HFA384X_INSW(a, buf, wc) insw(dev->base_addr + (a), buf, wc)
+#define HFA384X_OUTSW(a, buf, wc) outsw(dev->base_addr + (a), buf, wc)
+
+#endif /* PRISM2_IO_DEBUG */
+
+
+static int hfa384x_from_bap(struct net_device *dev, u16 bap, void *buf,
+ int len)
+{
+ u16 d_off;
+ u16 *pos;
+
+ d_off = (bap == 1) ? HFA384X_DATA1_OFF : HFA384X_DATA0_OFF;
+ pos = (u16 *) buf;
+
+ if (len / 2)
+ HFA384X_INSW(d_off, buf, len / 2);
+ pos += len / 2;
+
+ if (len & 1)
+ *((char *) pos) = HFA384X_INB(d_off);
+
+ return 0;
+}
+
+
+static int hfa384x_to_bap(struct net_device *dev, u16 bap, void *buf, int len)
+{
+ u16 d_off;
+ u16 *pos;
+
+ d_off = (bap == 1) ? HFA384X_DATA1_OFF : HFA384X_DATA0_OFF;
+ pos = (u16 *) buf;
+
+ if (len / 2)
+ HFA384X_OUTSW(d_off, buf, len / 2);
+ pos += len / 2;
+
+ if (len & 1)
+ HFA384X_OUTB(*((char *) pos), d_off);
+
+ return 0;
+}
+
+
+/* FIX: This might change at some point.. */
+#include "hostap_hw.c"
+
+
+static void prism2_plx_cor_sreset(local_info_t *local)
+{
+ unsigned char corsave;
+ struct hostap_plx_priv *hw_priv = local->hw_priv;
+
+ printk(KERN_DEBUG "%s: Doing reset via direct COR access.\n",
+ dev_info);
+
+ /* Set sreset bit of COR and clear it after hold time */
+
+ if (hw_priv->attr_mem == NULL) {
+ /* TMD7160 - COR at card's first I/O addr */
+ corsave = inb(hw_priv->cor_offset);
+ outb(corsave | COR_SRESET, hw_priv->cor_offset);
+ mdelay(2);
+ outb(corsave & ~COR_SRESET, hw_priv->cor_offset);
+ mdelay(2);
+ } else {
+ /* PLX9052 */
+ corsave = readb(hw_priv->attr_mem + hw_priv->cor_offset);
+ writeb(corsave | COR_SRESET,
+ hw_priv->attr_mem + hw_priv->cor_offset);
+ mdelay(2);
+ writeb(corsave & ~COR_SRESET,
+ hw_priv->attr_mem + hw_priv->cor_offset);
+ mdelay(2);
+ }
+}
+
+
+static void prism2_plx_genesis_reset(local_info_t *local, int hcr)
+{
+ unsigned char corsave;
+ struct hostap_plx_priv *hw_priv = local->hw_priv;
+
+ if (hw_priv->attr_mem == NULL) {
+ /* TMD7160 - COR at card's first I/O addr */
+ corsave = inb(hw_priv->cor_offset);
+ outb(corsave | COR_SRESET, hw_priv->cor_offset);
+ mdelay(10);
+ outb(hcr, hw_priv->cor_offset + 2);
+ mdelay(10);
+ outb(corsave & ~COR_SRESET, hw_priv->cor_offset);
+ mdelay(10);
+ } else {
+ /* PLX9052 */
+ corsave = readb(hw_priv->attr_mem + hw_priv->cor_offset);
+ writeb(corsave | COR_SRESET,
+ hw_priv->attr_mem + hw_priv->cor_offset);
+ mdelay(10);
+ writeb(hcr, hw_priv->attr_mem + hw_priv->cor_offset + 2);
+ mdelay(10);
+ writeb(corsave & ~COR_SRESET,
+ hw_priv->attr_mem + hw_priv->cor_offset);
+ mdelay(10);
+ }
+}
+
+
+static struct prism2_helper_functions prism2_plx_funcs =
+{
+ .card_present = NULL,
+ .cor_sreset = prism2_plx_cor_sreset,
+ .genesis_reset = prism2_plx_genesis_reset,
+ .hw_type = HOSTAP_HW_PLX,
+};
+
+
+static int prism2_plx_check_cis(void __iomem *attr_mem, int attr_len,
+ unsigned int *cor_offset,
+ unsigned int *cor_index)
+{
+#define CISTPL_CONFIG 0x1A
+#define CISTPL_MANFID 0x20
+#define CISTPL_END 0xFF
+#define CIS_MAX_LEN 256
+ u8 *cis;
+ int i, pos;
+ unsigned int rmsz, rasz, manfid1, manfid2;
+ struct prism2_plx_manfid *manfid;
+
+ cis = kmalloc(CIS_MAX_LEN, GFP_KERNEL);
+ if (cis == NULL)
+ return -ENOMEM;
+
+ /* read CIS; it is in even offsets in the beginning of attr_mem */
+ for (i = 0; i < CIS_MAX_LEN; i++)
+ cis[i] = readb(attr_mem + 2 * i);
+ printk(KERN_DEBUG "%s: CIS: %02x %02x %02x %02x %02x %02x ...\n",
+ dev_info, cis[0], cis[1], cis[2], cis[3], cis[4], cis[5]);
+
+ /* set reasonable defaults for Prism2 cards just in case CIS parsing
+ * fails */
+ *cor_offset = 0x3e0;
+ *cor_index = 0x01;
+ manfid1 = manfid2 = 0;
+
+ pos = 0;
+ while (pos < CIS_MAX_LEN - 1 && cis[pos] != CISTPL_END) {
+ if (pos + 2 + cis[pos + 1] > CIS_MAX_LEN)
+ goto cis_error;
+
+ switch (cis[pos]) {
+ case CISTPL_CONFIG:
+ if (cis[pos + 1] < 2)
+ goto cis_error;
+ rmsz = (cis[pos + 2] & 0x3c) >> 2;
+ rasz = cis[pos + 2] & 0x03;
+ if (4 + rasz + rmsz > cis[pos + 1])
+ goto cis_error;
+ *cor_index = cis[pos + 3] & 0x3F;
+ *cor_offset = 0;
+ for (i = 0; i <= rasz; i++)
+ *cor_offset += cis[pos + 4 + i] << (8 * i);
+ printk(KERN_DEBUG "%s: cor_index=0x%x "
+ "cor_offset=0x%x\n", dev_info,
+ *cor_index, *cor_offset);
+ if (*cor_offset > attr_len) {
+ printk(KERN_ERR "%s: COR offset not within "
+ "attr_mem\n", dev_info);
+ kfree(cis);
+ return -1;
+ }
+ break;
+
+ case CISTPL_MANFID:
+ if (cis[pos + 1] < 4)
+ goto cis_error;
+ manfid1 = cis[pos + 2] + (cis[pos + 3] << 8);
+ manfid2 = cis[pos + 4] + (cis[pos + 5] << 8);
+ printk(KERN_DEBUG "%s: manfid=0x%04x, 0x%04x\n",
+ dev_info, manfid1, manfid2);
+ break;
+ }
+
+ pos += cis[pos + 1] + 2;
+ }
+
+ if (pos >= CIS_MAX_LEN || cis[pos] != CISTPL_END)
+ goto cis_error;
+
+ for (manfid = prism2_plx_known_manfids; manfid->manfid1 != 0; manfid++)
+ if (manfid1 == manfid->manfid1 && manfid2 == manfid->manfid2) {
+ kfree(cis);
+ return 0;
+ }
+
+ printk(KERN_INFO "%s: unknown manfid 0x%04x, 0x%04x - assuming this is"
+ " not supported card\n", dev_info, manfid1, manfid2);
+ goto fail;
+
+ cis_error:
+ printk(KERN_WARNING "%s: invalid CIS data\n", dev_info);
+
+ fail:
+ kfree(cis);
+ if (ignore_cis) {
+ printk(KERN_INFO "%s: ignore_cis parameter set - ignoring "
+ "errors during CIS verification\n", dev_info);
+ return 0;
+ }
+ return -1;
+}
+
+
+static int prism2_plx_probe(struct pci_dev *pdev,
+ const struct pci_device_id *id)
+{
+ unsigned int pccard_ioaddr, plx_ioaddr;
+ unsigned long pccard_attr_mem;
+ unsigned int pccard_attr_len;
+ void __iomem *attr_mem = NULL;
+ unsigned int cor_offset = 0, cor_index = 0;
+ u32 reg;
+ local_info_t *local = NULL;
+ struct net_device *dev = NULL;
+ struct hostap_interface *iface;
+ static int cards_found /* = 0 */;
+ int irq_registered = 0;
+ int tmd7160;
+ struct hostap_plx_priv *hw_priv;
+
+ hw_priv = kzalloc(sizeof(*hw_priv), GFP_KERNEL);
+ if (hw_priv == NULL)
+ return -ENOMEM;
+
+ if (pci_enable_device(pdev))
+ goto err_out_free;
+
+ /* National Datacomm NCP130 based on TMD7160, not PLX9052. */
+ tmd7160 = (pdev->vendor == 0x15e8) && (pdev->device == 0x0131);
+
+ plx_ioaddr = pci_resource_start(pdev, 1);
+ pccard_ioaddr = pci_resource_start(pdev, tmd7160 ? 2 : 3);
+
+ if (tmd7160) {
+ /* TMD7160 */
+ attr_mem = NULL; /* no access to PC Card attribute memory */
+
+ printk(KERN_INFO "TMD7160 PCI/PCMCIA adapter: io=0x%x, "
+ "irq=%d, pccard_io=0x%x\n",
+ plx_ioaddr, pdev->irq, pccard_ioaddr);
+
+ cor_offset = plx_ioaddr;
+ cor_index = 0x04;
+
+ outb(cor_index | COR_LEVLREQ | COR_ENABLE_FUNC, plx_ioaddr);
+ mdelay(1);
+ reg = inb(plx_ioaddr);
+ if (reg != (cor_index | COR_LEVLREQ | COR_ENABLE_FUNC)) {
+ printk(KERN_ERR "%s: Error setting COR (expected="
+ "0x%02x, was=0x%02x)\n", dev_info,
+ cor_index | COR_LEVLREQ | COR_ENABLE_FUNC, reg);
+ goto fail;
+ }
+ } else {
+ /* PLX9052 */
+ pccard_attr_mem = pci_resource_start(pdev, 2);
+ pccard_attr_len = pci_resource_len(pdev, 2);
+ if (pccard_attr_len < PLX_MIN_ATTR_LEN)
+ goto fail;
+
+
+ attr_mem = ioremap(pccard_attr_mem, pccard_attr_len);
+ if (attr_mem == NULL) {
+ printk(KERN_ERR "%s: cannot remap attr_mem\n",
+ dev_info);
+ goto fail;
+ }
+
+ printk(KERN_INFO "PLX9052 PCI/PCMCIA adapter: "
+ "mem=0x%lx, plx_io=0x%x, irq=%d, pccard_io=0x%x\n",
+ pccard_attr_mem, plx_ioaddr, pdev->irq, pccard_ioaddr);
+
+ if (prism2_plx_check_cis(attr_mem, pccard_attr_len,
+ &cor_offset, &cor_index)) {
+ printk(KERN_INFO "Unknown PC Card CIS - not a "
+ "Prism2/2.5 card?\n");
+ goto fail;
+ }
+
+ printk(KERN_DEBUG "Prism2/2.5 PC Card detected in PLX9052 "
+ "adapter\n");
+
+ /* Write COR to enable PC Card */
+ writeb(cor_index | COR_LEVLREQ | COR_ENABLE_FUNC,
+ attr_mem + cor_offset);
+
+ /* Enable PCI interrupts if they are not already enabled */
+ reg = inl(plx_ioaddr + PLX_INTCSR);
+ printk(KERN_DEBUG "PLX_INTCSR=0x%x\n", reg);
+ if (!(reg & PLX_INTCSR_PCI_INTEN)) {
+ outl(reg | PLX_INTCSR_PCI_INTEN,
+ plx_ioaddr + PLX_INTCSR);
+ if (!(inl(plx_ioaddr + PLX_INTCSR) &
+ PLX_INTCSR_PCI_INTEN)) {
+ printk(KERN_WARNING "%s: Could not enable "
+ "Local Interrupts\n", dev_info);
+ goto fail;
+ }
+ }
+
+ reg = inl(plx_ioaddr + PLX_CNTRL);
+ printk(KERN_DEBUG "PLX_CNTRL=0x%x (Serial EEPROM "
+ "present=%d)\n",
+ reg, (reg & PLX_CNTRL_SERIAL_EEPROM_PRESENT) != 0);
+ /* should set PLX_PCIIPR to 0x01 (INTA#) if Serial EEPROM is
+ * not present; but are there really such cards in use(?) */
+ }
+
+ dev = prism2_init_local_data(&prism2_plx_funcs, cards_found,
+ &pdev->dev);
+ if (dev == NULL)
+ goto fail;
+ iface = netdev_priv(dev);
+ local = iface->local;
+ local->hw_priv = hw_priv;
+ cards_found++;
+
+ dev->irq = pdev->irq;
+ dev->base_addr = pccard_ioaddr;
+ hw_priv->attr_mem = attr_mem;
+ hw_priv->cor_offset = cor_offset;
+
+ pci_set_drvdata(pdev, dev);
+
+ if (request_irq(dev->irq, prism2_interrupt, IRQF_SHARED, dev->name,
+ dev)) {
+ printk(KERN_WARNING "%s: request_irq failed\n", dev->name);
+ goto fail;
+ } else
+ irq_registered = 1;
+
+ if (prism2_hw_config(dev, 1)) {
+ printk(KERN_DEBUG "%s: hardware initialization failed\n",
+ dev_info);
+ goto fail;
+ }
+
+ return hostap_hw_ready(dev);
+
+ fail:
+ if (irq_registered && dev)
+ free_irq(dev->irq, dev);
+
+ if (attr_mem)
+ iounmap(attr_mem);
+
+ pci_disable_device(pdev);
+ prism2_free_local_data(dev);
+
+ err_out_free:
+ kfree(hw_priv);
+
+ return -ENODEV;
+}
+
+
+static void prism2_plx_remove(struct pci_dev *pdev)
+{
+ struct net_device *dev;
+ struct hostap_interface *iface;
+ struct hostap_plx_priv *hw_priv;
+
+ dev = pci_get_drvdata(pdev);
+ iface = netdev_priv(dev);
+ hw_priv = iface->local->hw_priv;
+
+ /* Reset the hardware, and ensure interrupts are disabled. */
+ prism2_plx_cor_sreset(iface->local);
+ hfa384x_disable_interrupts(dev);
+
+ if (hw_priv->attr_mem)
+ iounmap(hw_priv->attr_mem);
+ if (dev->irq)
+ free_irq(dev->irq, dev);
+
+ prism2_free_local_data(dev);
+ kfree(hw_priv);
+ pci_disable_device(pdev);
+}
+
+
+MODULE_DEVICE_TABLE(pci, prism2_plx_id_table);
+
+static struct pci_driver prism2_plx_driver = {
+ .name = "hostap_plx",
+ .id_table = prism2_plx_id_table,
+ .probe = prism2_plx_probe,
+ .remove = prism2_plx_remove,
+};
+
+module_pci_driver(prism2_plx_driver);
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-27 14:16:02 +0000