diff options
Diffstat (limited to 'drivers/net/wireless/intersil/prism54/isl_38xx.c')
| -rw-r--r-- | drivers/net/wireless/intersil/prism54/isl_38xx.c | 256 |
1 files changed, 256 insertions, 0 deletions
diff --git a/drivers/net/wireless/intersil/prism54/isl_38xx.c b/drivers/net/wireless/intersil/prism54/isl_38xx.c new file mode 100644 index 000000000..ce9d4db0d --- /dev/null +++ b/drivers/net/wireless/intersil/prism54/isl_38xx.c @@ -0,0 +1,256 @@ +/* + * Copyright (C) 2002 Intersil Americas Inc. + * Copyright (C) 2003-2004 Luis R. Rodriguez <mcgrof@ruslug.rutgers.edu>_ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see <http://www.gnu.org/licenses/>. + * + */ + +#include <linux/module.h> +#include <linux/types.h> +#include <linux/delay.h> +#include <linux/ktime.h> + +#include <linux/uaccess.h> +#include <asm/io.h> + +#include "prismcompat.h" +#include "isl_38xx.h" +#include "islpci_dev.h" +#include "islpci_mgt.h" + +/****************************************************************************** + Device Interface & Control functions +******************************************************************************/ + +/** + * isl38xx_disable_interrupts - disable all interrupts + * @device: pci memory base address + * + * Instructs the device to disable all interrupt reporting by asserting + * the IRQ line. New events may still show up in the interrupt identification + * register located at offset %ISL38XX_INT_IDENT_REG. + */ +void +isl38xx_disable_interrupts(void __iomem *device) +{ + isl38xx_w32_flush(device, 0x00000000, ISL38XX_INT_EN_REG); + udelay(ISL38XX_WRITEIO_DELAY); +} + +void +isl38xx_handle_sleep_request(isl38xx_control_block *control_block, + int *powerstate, void __iomem *device_base) +{ + /* device requests to go into sleep mode + * check whether the transmit queues for data and management are empty */ + if (isl38xx_in_queue(control_block, ISL38XX_CB_TX_DATA_LQ)) + /* data tx queue not empty */ + return; + + if (isl38xx_in_queue(control_block, ISL38XX_CB_TX_MGMTQ)) + /* management tx queue not empty */ + return; + + /* check also whether received frames are pending */ + if (isl38xx_in_queue(control_block, ISL38XX_CB_RX_DATA_LQ)) + /* data rx queue not empty */ + return; + + if (isl38xx_in_queue(control_block, ISL38XX_CB_RX_MGMTQ)) + /* management rx queue not empty */ + return; + +#if VERBOSE > SHOW_ERROR_MESSAGES + DEBUG(SHOW_TRACING, "Device going to sleep mode\n"); +#endif + + /* all queues are empty, allow the device to go into sleep mode */ + *powerstate = ISL38XX_PSM_POWERSAVE_STATE; + + /* assert the Sleep interrupt in the Device Interrupt Register */ + isl38xx_w32_flush(device_base, ISL38XX_DEV_INT_SLEEP, + ISL38XX_DEV_INT_REG); + udelay(ISL38XX_WRITEIO_DELAY); +} + +void +isl38xx_handle_wakeup(isl38xx_control_block *control_block, + int *powerstate, void __iomem *device_base) +{ + /* device is in active state, update the powerstate flag */ + *powerstate = ISL38XX_PSM_ACTIVE_STATE; + + /* now check whether there are frames pending for the card */ + if (!isl38xx_in_queue(control_block, ISL38XX_CB_TX_DATA_LQ) + && !isl38xx_in_queue(control_block, ISL38XX_CB_TX_MGMTQ)) + return; + +#if VERBOSE > SHOW_ERROR_MESSAGES + DEBUG(SHOW_ANYTHING, "Wake up handler trigger the device\n"); +#endif + + /* either data or management transmit queue has a frame pending + * trigger the device by setting the Update bit in the Device Int reg */ + isl38xx_w32_flush(device_base, ISL38XX_DEV_INT_UPDATE, + ISL38XX_DEV_INT_REG); + udelay(ISL38XX_WRITEIO_DELAY); +} + +void +isl38xx_trigger_device(int asleep, void __iomem *device_base) +{ + u32 reg; + +#if VERBOSE > SHOW_ERROR_MESSAGES + u32 counter = 0; + struct timespec64 current_ts64; + DEBUG(SHOW_FUNCTION_CALLS, "isl38xx trigger device\n"); +#endif + + /* check whether the device is in power save mode */ + if (asleep) { + /* device is in powersave, trigger the device for wakeup */ +#if VERBOSE > SHOW_ERROR_MESSAGES + ktime_get_real_ts64(¤t_ts64); + DEBUG(SHOW_TRACING, "%lld.%09ld Device wakeup triggered\n", + (s64)current_ts64.tv_sec, current_ts64.tv_nsec); + + DEBUG(SHOW_TRACING, "%lld.%09ld Device register read %08x\n", + (s64)current_ts64.tv_sec, current_ts64.tv_nsec, + readl(device_base + ISL38XX_CTRL_STAT_REG)); +#endif + + reg = readl(device_base + ISL38XX_INT_IDENT_REG); + if (reg == 0xabadface) { +#if VERBOSE > SHOW_ERROR_MESSAGES + ktime_get_real_ts64(¤t_ts64); + DEBUG(SHOW_TRACING, + "%lld.%09ld Device register abadface\n", + (s64)current_ts64.tv_sec, current_ts64.tv_nsec); +#endif + /* read the Device Status Register until Sleepmode bit is set */ + while (reg = readl(device_base + ISL38XX_CTRL_STAT_REG), + (reg & ISL38XX_CTRL_STAT_SLEEPMODE) == 0) { + udelay(ISL38XX_WRITEIO_DELAY); +#if VERBOSE > SHOW_ERROR_MESSAGES + counter++; +#endif + } + +#if VERBOSE > SHOW_ERROR_MESSAGES + DEBUG(SHOW_TRACING, + "%lld.%09ld Device register read %08x\n", + (s64)current_ts64.tv_sec, current_ts64.tv_nsec, + readl(device_base + ISL38XX_CTRL_STAT_REG)); + ktime_get_real_ts64(¤t_ts64); + DEBUG(SHOW_TRACING, + "%lld.%09ld Device asleep counter %i\n", + (s64)current_ts64.tv_sec, current_ts64.tv_nsec, + counter); +#endif + } + /* assert the Wakeup interrupt in the Device Interrupt Register */ + isl38xx_w32_flush(device_base, ISL38XX_DEV_INT_WAKEUP, + ISL38XX_DEV_INT_REG); + +#if VERBOSE > SHOW_ERROR_MESSAGES + udelay(ISL38XX_WRITEIO_DELAY); + + /* perform another read on the Device Status Register */ + reg = readl(device_base + ISL38XX_CTRL_STAT_REG); + ktime_get_real_ts64(¤t_ts64); + DEBUG(SHOW_TRACING, "%lld.%00ld Device register read %08x\n", + (s64)current_ts64.tv_sec, current_ts64.tv_nsec, reg); +#endif + } else { + /* device is (still) awake */ +#if VERBOSE > SHOW_ERROR_MESSAGES + DEBUG(SHOW_TRACING, "Device is in active state\n"); +#endif + /* trigger the device by setting the Update bit in the Device Int reg */ + + isl38xx_w32_flush(device_base, ISL38XX_DEV_INT_UPDATE, + ISL38XX_DEV_INT_REG); + } +} + +void +isl38xx_interface_reset(void __iomem *device_base, dma_addr_t host_address) +{ +#if VERBOSE > SHOW_ERROR_MESSAGES + DEBUG(SHOW_FUNCTION_CALLS, "isl38xx_interface_reset\n"); +#endif + + /* load the address of the control block in the device */ + isl38xx_w32_flush(device_base, host_address, ISL38XX_CTRL_BLK_BASE_REG); + udelay(ISL38XX_WRITEIO_DELAY); + + /* set the reset bit in the Device Interrupt Register */ + isl38xx_w32_flush(device_base, ISL38XX_DEV_INT_RESET, ISL38XX_DEV_INT_REG); + udelay(ISL38XX_WRITEIO_DELAY); + + /* enable the interrupt for detecting initialization */ + + /* Note: Do not enable other interrupts here. We want the + * device to have come up first 100% before allowing any other + * interrupts. */ + isl38xx_w32_flush(device_base, ISL38XX_INT_IDENT_INIT, ISL38XX_INT_EN_REG); + udelay(ISL38XX_WRITEIO_DELAY); /* allow complete full reset */ +} + +void +isl38xx_enable_common_interrupts(void __iomem *device_base) +{ + u32 reg; + + reg = ISL38XX_INT_IDENT_UPDATE | ISL38XX_INT_IDENT_SLEEP | + ISL38XX_INT_IDENT_WAKEUP; + isl38xx_w32_flush(device_base, reg, ISL38XX_INT_EN_REG); + udelay(ISL38XX_WRITEIO_DELAY); +} + +int +isl38xx_in_queue(isl38xx_control_block *cb, int queue) +{ + const s32 delta = (le32_to_cpu(cb->driver_curr_frag[queue]) - + le32_to_cpu(cb->device_curr_frag[queue])); + + /* determine the amount of fragments in the queue depending on the type + * of the queue, either transmit or receive */ + + BUG_ON(delta < 0); /* driver ptr must be ahead of device ptr */ + + switch (queue) { + /* send queues */ + case ISL38XX_CB_TX_MGMTQ: + BUG_ON(delta > ISL38XX_CB_MGMT_QSIZE); + + case ISL38XX_CB_TX_DATA_LQ: + case ISL38XX_CB_TX_DATA_HQ: + BUG_ON(delta > ISL38XX_CB_TX_QSIZE); + return delta; + + /* receive queues */ + case ISL38XX_CB_RX_MGMTQ: + BUG_ON(delta > ISL38XX_CB_MGMT_QSIZE); + return ISL38XX_CB_MGMT_QSIZE - delta; + + case ISL38XX_CB_RX_DATA_LQ: + case ISL38XX_CB_RX_DATA_HQ: + BUG_ON(delta > ISL38XX_CB_RX_QSIZE); + return ISL38XX_CB_RX_QSIZE - delta; + } + BUG(); + return 0; +} |