diff options
Diffstat (limited to 'drivers/rtc/rtc-ds1302.c')
| -rw-r--r-- | drivers/rtc/rtc-ds1302.c | 218 |
1 files changed, 218 insertions, 0 deletions
diff --git a/drivers/rtc/rtc-ds1302.c b/drivers/rtc/rtc-ds1302.c new file mode 100644 index 000000000..2a881150d --- /dev/null +++ b/drivers/rtc/rtc-ds1302.c @@ -0,0 +1,218 @@ +/* + * Dallas DS1302 RTC Support + * + * Copyright (C) 2002 David McCullough + * Copyright (C) 2003 - 2007 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License version 2. See the file "COPYING" in the main directory of + * this archive for more details. + */ + +#include <linux/bcd.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/rtc.h> +#include <linux/spi/spi.h> + +#define DRV_NAME "rtc-ds1302" + +#define RTC_CMD_READ 0x81 /* Read command */ +#define RTC_CMD_WRITE 0x80 /* Write command */ + +#define RTC_CMD_WRITE_ENABLE 0x00 /* Write enable */ +#define RTC_CMD_WRITE_DISABLE 0x80 /* Write disable */ + +#define RTC_ADDR_RAM0 0x20 /* Address of RAM0 */ +#define RTC_ADDR_TCR 0x08 /* Address of trickle charge register */ +#define RTC_CLCK_BURST 0x1F /* Address of clock burst */ +#define RTC_CLCK_LEN 0x08 /* Size of clock burst */ +#define RTC_ADDR_CTRL 0x07 /* Address of control register */ +#define RTC_ADDR_YEAR 0x06 /* Address of year register */ +#define RTC_ADDR_DAY 0x05 /* Address of day of week register */ +#define RTC_ADDR_MON 0x04 /* Address of month register */ +#define RTC_ADDR_DATE 0x03 /* Address of day of month register */ +#define RTC_ADDR_HOUR 0x02 /* Address of hour register */ +#define RTC_ADDR_MIN 0x01 /* Address of minute register */ +#define RTC_ADDR_SEC 0x00 /* Address of second register */ + +static int ds1302_rtc_set_time(struct device *dev, struct rtc_time *time) +{ + struct spi_device *spi = dev_get_drvdata(dev); + u8 buf[1 + RTC_CLCK_LEN]; + u8 *bp; + int status; + + /* Enable writing */ + bp = buf; + *bp++ = RTC_ADDR_CTRL << 1 | RTC_CMD_WRITE; + *bp++ = RTC_CMD_WRITE_ENABLE; + + status = spi_write_then_read(spi, buf, 2, + NULL, 0); + if (status) + return status; + + /* Write registers starting at the first time/date address. */ + bp = buf; + *bp++ = RTC_CLCK_BURST << 1 | RTC_CMD_WRITE; + + *bp++ = bin2bcd(time->tm_sec); + *bp++ = bin2bcd(time->tm_min); + *bp++ = bin2bcd(time->tm_hour); + *bp++ = bin2bcd(time->tm_mday); + *bp++ = bin2bcd(time->tm_mon + 1); + *bp++ = time->tm_wday + 1; + *bp++ = bin2bcd(time->tm_year % 100); + *bp++ = RTC_CMD_WRITE_DISABLE; + + /* use write-then-read since dma from stack is nonportable */ + return spi_write_then_read(spi, buf, sizeof(buf), + NULL, 0); +} + +static int ds1302_rtc_get_time(struct device *dev, struct rtc_time *time) +{ + struct spi_device *spi = dev_get_drvdata(dev); + u8 addr = RTC_CLCK_BURST << 1 | RTC_CMD_READ; + u8 buf[RTC_CLCK_LEN - 1]; + int status; + + /* Use write-then-read to get all the date/time registers + * since dma from stack is nonportable + */ + status = spi_write_then_read(spi, &addr, sizeof(addr), + buf, sizeof(buf)); + if (status < 0) + return status; + + /* Decode the registers */ + time->tm_sec = bcd2bin(buf[RTC_ADDR_SEC]); + time->tm_min = bcd2bin(buf[RTC_ADDR_MIN]); + time->tm_hour = bcd2bin(buf[RTC_ADDR_HOUR]); + time->tm_wday = buf[RTC_ADDR_DAY] - 1; + time->tm_mday = bcd2bin(buf[RTC_ADDR_DATE]); + time->tm_mon = bcd2bin(buf[RTC_ADDR_MON]) - 1; + time->tm_year = bcd2bin(buf[RTC_ADDR_YEAR]) + 100; + + return 0; +} + +static const struct rtc_class_ops ds1302_rtc_ops = { + .read_time = ds1302_rtc_get_time, + .set_time = ds1302_rtc_set_time, +}; + +static int ds1302_probe(struct spi_device *spi) +{ + struct rtc_device *rtc; + u8 addr; + u8 buf[4]; + u8 *bp; + int status; + + /* Sanity check board setup data. This may be hooked up + * in 3wire mode, but we don't care. Note that unless + * there's an inverter in place, this needs SPI_CS_HIGH! + */ + if (spi->bits_per_word && (spi->bits_per_word != 8)) { + dev_err(&spi->dev, "bad word length\n"); + return -EINVAL; + } else if (spi->max_speed_hz > 2000000) { + dev_err(&spi->dev, "speed is too high\n"); + return -EINVAL; + } else if (spi->mode & SPI_CPHA) { + dev_err(&spi->dev, "bad mode\n"); + return -EINVAL; + } + + addr = RTC_ADDR_CTRL << 1 | RTC_CMD_READ; + status = spi_write_then_read(spi, &addr, sizeof(addr), buf, 1); + if (status < 0) { + dev_err(&spi->dev, "control register read error %d\n", + status); + return status; + } + + if ((buf[0] & ~RTC_CMD_WRITE_DISABLE) != 0) { + status = spi_write_then_read(spi, &addr, sizeof(addr), buf, 1); + if (status < 0) { + dev_err(&spi->dev, "control register read error %d\n", + status); + return status; + } + + if ((buf[0] & ~RTC_CMD_WRITE_DISABLE) != 0) { + dev_err(&spi->dev, "junk in control register\n"); + return -ENODEV; + } + } + if (buf[0] == 0) { + bp = buf; + *bp++ = RTC_ADDR_CTRL << 1 | RTC_CMD_WRITE; + *bp++ = RTC_CMD_WRITE_DISABLE; + + status = spi_write_then_read(spi, buf, 2, NULL, 0); + if (status < 0) { + dev_err(&spi->dev, "control register write error %d\n", + status); + return status; + } + + addr = RTC_ADDR_CTRL << 1 | RTC_CMD_READ; + status = spi_write_then_read(spi, &addr, sizeof(addr), buf, 1); + if (status < 0) { + dev_err(&spi->dev, + "error %d reading control register\n", + status); + return status; + } + + if (buf[0] != RTC_CMD_WRITE_DISABLE) { + dev_err(&spi->dev, "failed to detect chip\n"); + return -ENODEV; + } + } + + spi_set_drvdata(spi, spi); + + rtc = devm_rtc_device_register(&spi->dev, "ds1302", + &ds1302_rtc_ops, THIS_MODULE); + if (IS_ERR(rtc)) { + status = PTR_ERR(rtc); + dev_err(&spi->dev, "error %d registering rtc\n", status); + return status; + } + + return 0; +} + +static int ds1302_remove(struct spi_device *spi) +{ + spi_set_drvdata(spi, NULL); + return 0; +} + +#ifdef CONFIG_OF +static const struct of_device_id ds1302_dt_ids[] = { + { .compatible = "maxim,ds1302", }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, ds1302_dt_ids); +#endif + +static struct spi_driver ds1302_driver = { + .driver.name = "rtc-ds1302", + .driver.of_match_table = of_match_ptr(ds1302_dt_ids), + .probe = ds1302_probe, + .remove = ds1302_remove, +}; + +module_spi_driver(ds1302_driver); + +MODULE_DESCRIPTION("Dallas DS1302 RTC driver"); +MODULE_AUTHOR("Paul Mundt, David McCullough"); +MODULE_LICENSE("GPL v2"); |