diff options
Diffstat (limited to 'drivers/scsi/mpt3sas/mpi')
| -rw-r--r-- | drivers/scsi/mpt3sas/mpi/mpi2.h | 1286 | ||||
| -rw-r--r-- | drivers/scsi/mpt3sas/mpi/mpi2_cnfg.h | 4032 | ||||
| -rw-r--r-- | drivers/scsi/mpt3sas/mpi/mpi2_init.h | 591 | ||||
| -rw-r--r-- | drivers/scsi/mpt3sas/mpi/mpi2_ioc.h | 2142 | ||||
| -rw-r--r-- | drivers/scsi/mpt3sas/mpi/mpi2_pci.h | 111 | ||||
| -rw-r--r-- | drivers/scsi/mpt3sas/mpi/mpi2_raid.h | 356 | ||||
| -rw-r--r-- | drivers/scsi/mpt3sas/mpi/mpi2_sas.h | 304 | ||||
| -rw-r--r-- | drivers/scsi/mpt3sas/mpi/mpi2_tool.h | 496 | ||||
| -rw-r--r-- | drivers/scsi/mpt3sas/mpi/mpi2_type.h | 58 |
9 files changed, 9376 insertions, 0 deletions
diff --git a/drivers/scsi/mpt3sas/mpi/mpi2.h b/drivers/scsi/mpt3sas/mpi/mpi2.h new file mode 100644 index 000000000..1e45268a7 --- /dev/null +++ b/drivers/scsi/mpt3sas/mpi/mpi2.h @@ -0,0 +1,1286 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright 2000-2015 Avago Technologies. All rights reserved. + * + * + * Name: mpi2.h + * Title: MPI Message independent structures and definitions + * including System Interface Register Set and + * scatter/gather formats. + * Creation Date: June 21, 2006 + * + * mpi2.h Version: 02.00.50 + * + * NOTE: Names (typedefs, defines, etc.) beginning with an MPI25 or Mpi25 + * prefix are for use only on MPI v2.5 products, and must not be used + * with MPI v2.0 products. Unless otherwise noted, names beginning with + * MPI2 or Mpi2 are for use with both MPI v2.0 and MPI v2.5 products. + * + * Version History + * --------------- + * + * Date Version Description + * -------- -------- ------------------------------------------------------ + * 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A. + * 06-04-07 02.00.01 Bumped MPI2_HEADER_VERSION_UNIT. + * 06-26-07 02.00.02 Bumped MPI2_HEADER_VERSION_UNIT. + * 08-31-07 02.00.03 Bumped MPI2_HEADER_VERSION_UNIT. + * Moved ReplyPostHostIndex register to offset 0x6C of the + * MPI2_SYSTEM_INTERFACE_REGS and modified the define for + * MPI2_REPLY_POST_HOST_INDEX_OFFSET. + * Added union of request descriptors. + * Added union of reply descriptors. + * 10-31-07 02.00.04 Bumped MPI2_HEADER_VERSION_UNIT. + * Added define for MPI2_VERSION_02_00. + * Fixed the size of the FunctionDependent5 field in the + * MPI2_DEFAULT_REPLY structure. + * 12-18-07 02.00.05 Bumped MPI2_HEADER_VERSION_UNIT. + * Removed the MPI-defined Fault Codes and extended the + * product specific codes up to 0xEFFF. + * Added a sixth key value for the WriteSequence register + * and changed the flush value to 0x0. + * Added message function codes for Diagnostic Buffer Post + * and Diagnsotic Release. + * New IOCStatus define: MPI2_IOCSTATUS_DIAGNOSTIC_RELEASED + * Moved MPI2_VERSION_UNION from mpi2_ioc.h. + * 02-29-08 02.00.06 Bumped MPI2_HEADER_VERSION_UNIT. + * 03-03-08 02.00.07 Bumped MPI2_HEADER_VERSION_UNIT. + * 05-21-08 02.00.08 Bumped MPI2_HEADER_VERSION_UNIT. + * Added #defines for marking a reply descriptor as unused. + * 06-27-08 02.00.09 Bumped MPI2_HEADER_VERSION_UNIT. + * 10-02-08 02.00.10 Bumped MPI2_HEADER_VERSION_UNIT. + * Moved LUN field defines from mpi2_init.h. + * 01-19-09 02.00.11 Bumped MPI2_HEADER_VERSION_UNIT. + * 05-06-09 02.00.12 Bumped MPI2_HEADER_VERSION_UNIT. + * In all request and reply descriptors, replaced VF_ID + * field with MSIxIndex field. + * Removed DevHandle field from + * MPI2_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR and made those + * bytes reserved. + * Added RAID Accelerator functionality. + * 07-30-09 02.00.13 Bumped MPI2_HEADER_VERSION_UNIT. + * 10-28-09 02.00.14 Bumped MPI2_HEADER_VERSION_UNIT. + * Added MSI-x index mask and shift for Reply Post Host + * Index register. + * Added function code for Host Based Discovery Action. + * 02-10-10 02.00.15 Bumped MPI2_HEADER_VERSION_UNIT. + * Added define for MPI2_FUNCTION_PWR_MGMT_CONTROL. + * Added defines for product-specific range of message + * function codes, 0xF0 to 0xFF. + * 05-12-10 02.00.16 Bumped MPI2_HEADER_VERSION_UNIT. + * Added alternative defines for the SGE Direction bit. + * 08-11-10 02.00.17 Bumped MPI2_HEADER_VERSION_UNIT. + * 11-10-10 02.00.18 Bumped MPI2_HEADER_VERSION_UNIT. + * Added MPI2_IEEE_SGE_FLAGS_SYSTEMPLBCPI_ADDR define. + * 02-23-11 02.00.19 Bumped MPI2_HEADER_VERSION_UNIT. + * Added MPI2_FUNCTION_SEND_HOST_MESSAGE. + * 03-09-11 02.00.20 Bumped MPI2_HEADER_VERSION_UNIT. + * 05-25-11 02.00.21 Bumped MPI2_HEADER_VERSION_UNIT. + * 08-24-11 02.00.22 Bumped MPI2_HEADER_VERSION_UNIT. + * 11-18-11 02.00.23 Bumped MPI2_HEADER_VERSION_UNIT. + * Incorporating additions for MPI v2.5. + * 02-06-12 02.00.24 Bumped MPI2_HEADER_VERSION_UNIT. + * 03-29-12 02.00.25 Bumped MPI2_HEADER_VERSION_UNIT. + * Added Hard Reset delay timings. + * 07-10-12 02.00.26 Bumped MPI2_HEADER_VERSION_UNIT. + * 07-26-12 02.00.27 Bumped MPI2_HEADER_VERSION_UNIT. + * 11-27-12 02.00.28 Bumped MPI2_HEADER_VERSION_UNIT. + * 12-20-12 02.00.29 Bumped MPI2_HEADER_VERSION_UNIT. + * Added MPI25_SUP_REPLY_POST_HOST_INDEX_OFFSET. + * 04-09-13 02.00.30 Bumped MPI2_HEADER_VERSION_UNIT. + * 04-17-13 02.00.31 Bumped MPI2_HEADER_VERSION_UNIT. + * 08-19-13 02.00.32 Bumped MPI2_HEADER_VERSION_UNIT. + * 12-05-13 02.00.33 Bumped MPI2_HEADER_VERSION_UNIT. + * 01-08-14 02.00.34 Bumped MPI2_HEADER_VERSION_UNIT + * 06-13-14 02.00.35 Bumped MPI2_HEADER_VERSION_UNIT. + * 11-18-14 02.00.36 Updated copyright information. + * Bumped MPI2_HEADER_VERSION_UNIT. + * 03-16-15 02.00.37 Bumped MPI2_HEADER_VERSION_UNIT. + * Added Scratchpad registers to + * MPI2_SYSTEM_INTERFACE_REGS. + * Added MPI2_DIAG_SBR_RELOAD. + * 03-19-15 02.00.38 Bumped MPI2_HEADER_VERSION_UNIT. + * 05-25-15 02.00.39 Bumped MPI2_HEADER_VERSION_UNIT. + * 08-25-15 02.00.40 Bumped MPI2_HEADER_VERSION_UNIT. + * 12-15-15 02.00.41 Bumped MPI_HEADER_VERSION_UNIT + * 01-01-16 02.00.42 Bumped MPI_HEADER_VERSION_UNIT + * 04-05-16 02.00.43 Modified MPI26_DIAG_BOOT_DEVICE_SELECT defines + * to be unique within first 32 characters. + * Removed AHCI support. + * Removed SOP support. + * Bumped MPI2_HEADER_VERSION_UNIT. + * 04-10-16 02.00.44 Bumped MPI2_HEADER_VERSION_UNIT. + * 07-06-16 02.00.45 Bumped MPI2_HEADER_VERSION_UNIT. + * 09-02-16 02.00.46 Bumped MPI2_HEADER_VERSION_UNIT. + * 11-23-16 02.00.47 Bumped MPI2_HEADER_VERSION_UNIT. + * 02-03-17 02.00.48 Bumped MPI2_HEADER_VERSION_UNIT. + * 06-13-17 02.00.49 Bumped MPI2_HEADER_VERSION_UNIT. + * 09-29-17 02.00.50 Bumped MPI2_HEADER_VERSION_UNIT. + * -------------------------------------------------------------------------- + */ + +#ifndef MPI2_H +#define MPI2_H + +/***************************************************************************** +* +* MPI Version Definitions +* +*****************************************************************************/ + +#define MPI2_VERSION_MAJOR_MASK (0xFF00) +#define MPI2_VERSION_MAJOR_SHIFT (8) +#define MPI2_VERSION_MINOR_MASK (0x00FF) +#define MPI2_VERSION_MINOR_SHIFT (0) + +/*major version for all MPI v2.x */ +#define MPI2_VERSION_MAJOR (0x02) + +/*minor version for MPI v2.0 compatible products */ +#define MPI2_VERSION_MINOR (0x00) +#define MPI2_VERSION ((MPI2_VERSION_MAJOR << MPI2_VERSION_MAJOR_SHIFT) | \ + MPI2_VERSION_MINOR) +#define MPI2_VERSION_02_00 (0x0200) + +/*minor version for MPI v2.5 compatible products */ +#define MPI25_VERSION_MINOR (0x05) +#define MPI25_VERSION ((MPI2_VERSION_MAJOR << MPI2_VERSION_MAJOR_SHIFT) | \ + MPI25_VERSION_MINOR) +#define MPI2_VERSION_02_05 (0x0205) + +/*minor version for MPI v2.6 compatible products */ +#define MPI26_VERSION_MINOR (0x06) +#define MPI26_VERSION ((MPI2_VERSION_MAJOR << MPI2_VERSION_MAJOR_SHIFT) | \ + MPI26_VERSION_MINOR) +#define MPI2_VERSION_02_06 (0x0206) + + +/* Unit and Dev versioning for this MPI header set */ +#define MPI2_HEADER_VERSION_UNIT (0x32) +#define MPI2_HEADER_VERSION_DEV (0x00) +#define MPI2_HEADER_VERSION_UNIT_MASK (0xFF00) +#define MPI2_HEADER_VERSION_UNIT_SHIFT (8) +#define MPI2_HEADER_VERSION_DEV_MASK (0x00FF) +#define MPI2_HEADER_VERSION_DEV_SHIFT (0) +#define MPI2_HEADER_VERSION ((MPI2_HEADER_VERSION_UNIT << 8) | \ + MPI2_HEADER_VERSION_DEV) + +/***************************************************************************** +* +* IOC State Definitions +* +*****************************************************************************/ + +#define MPI2_IOC_STATE_RESET (0x00000000) +#define MPI2_IOC_STATE_READY (0x10000000) +#define MPI2_IOC_STATE_OPERATIONAL (0x20000000) +#define MPI2_IOC_STATE_FAULT (0x40000000) + +#define MPI2_IOC_STATE_MASK (0xF0000000) +#define MPI2_IOC_STATE_SHIFT (28) + +/*Fault state range for prodcut specific codes */ +#define MPI2_FAULT_PRODUCT_SPECIFIC_MIN (0x0000) +#define MPI2_FAULT_PRODUCT_SPECIFIC_MAX (0xEFFF) + +/***************************************************************************** +* +* System Interface Register Definitions +* +*****************************************************************************/ + +typedef volatile struct _MPI2_SYSTEM_INTERFACE_REGS { + U32 Doorbell; /*0x00 */ + U32 WriteSequence; /*0x04 */ + U32 HostDiagnostic; /*0x08 */ + U32 Reserved1; /*0x0C */ + U32 DiagRWData; /*0x10 */ + U32 DiagRWAddressLow; /*0x14 */ + U32 DiagRWAddressHigh; /*0x18 */ + U32 Reserved2[5]; /*0x1C */ + U32 HostInterruptStatus; /*0x30 */ + U32 HostInterruptMask; /*0x34 */ + U32 DCRData; /*0x38 */ + U32 DCRAddress; /*0x3C */ + U32 Reserved3[2]; /*0x40 */ + U32 ReplyFreeHostIndex; /*0x48 */ + U32 Reserved4[8]; /*0x4C */ + U32 ReplyPostHostIndex; /*0x6C */ + U32 Reserved5; /*0x70 */ + U32 HCBSize; /*0x74 */ + U32 HCBAddressLow; /*0x78 */ + U32 HCBAddressHigh; /*0x7C */ + U32 Reserved6[12]; /*0x80 */ + U32 Scratchpad[4]; /*0xB0 */ + U32 RequestDescriptorPostLow; /*0xC0 */ + U32 RequestDescriptorPostHigh; /*0xC4 */ + U32 AtomicRequestDescriptorPost;/*0xC8 */ + U32 Reserved7[13]; /*0xCC */ +} MPI2_SYSTEM_INTERFACE_REGS, + *PTR_MPI2_SYSTEM_INTERFACE_REGS, + Mpi2SystemInterfaceRegs_t, + *pMpi2SystemInterfaceRegs_t; + +/* + *Defines for working with the Doorbell register. + */ +#define MPI2_DOORBELL_OFFSET (0x00000000) + +/*IOC --> System values */ +#define MPI2_DOORBELL_USED (0x08000000) +#define MPI2_DOORBELL_WHO_INIT_MASK (0x07000000) +#define MPI2_DOORBELL_WHO_INIT_SHIFT (24) +#define MPI2_DOORBELL_FAULT_CODE_MASK (0x0000FFFF) +#define MPI2_DOORBELL_DATA_MASK (0x0000FFFF) + +/*System --> IOC values */ +#define MPI2_DOORBELL_FUNCTION_MASK (0xFF000000) +#define MPI2_DOORBELL_FUNCTION_SHIFT (24) +#define MPI2_DOORBELL_ADD_DWORDS_MASK (0x00FF0000) +#define MPI2_DOORBELL_ADD_DWORDS_SHIFT (16) + +/* + *Defines for the WriteSequence register + */ +#define MPI2_WRITE_SEQUENCE_OFFSET (0x00000004) +#define MPI2_WRSEQ_KEY_VALUE_MASK (0x0000000F) +#define MPI2_WRSEQ_FLUSH_KEY_VALUE (0x0) +#define MPI2_WRSEQ_1ST_KEY_VALUE (0xF) +#define MPI2_WRSEQ_2ND_KEY_VALUE (0x4) +#define MPI2_WRSEQ_3RD_KEY_VALUE (0xB) +#define MPI2_WRSEQ_4TH_KEY_VALUE (0x2) +#define MPI2_WRSEQ_5TH_KEY_VALUE (0x7) +#define MPI2_WRSEQ_6TH_KEY_VALUE (0xD) + +/* + *Defines for the HostDiagnostic register + */ +#define MPI2_HOST_DIAGNOSTIC_OFFSET (0x00000008) + +#define MPI2_DIAG_SBR_RELOAD (0x00002000) + +#define MPI2_DIAG_BOOT_DEVICE_SELECT_MASK (0x00001800) +#define MPI2_DIAG_BOOT_DEVICE_SELECT_DEFAULT (0x00000000) +#define MPI2_DIAG_BOOT_DEVICE_SELECT_HCDW (0x00000800) + +/* Defines for V7A/V7R HostDiagnostic Register */ +#define MPI26_DIAG_BOOT_DEVICE_SEL_64FLASH (0x00000000) +#define MPI26_DIAG_BOOT_DEVICE_SEL_64HCDW (0x00000800) +#define MPI26_DIAG_BOOT_DEVICE_SEL_32FLASH (0x00001000) +#define MPI26_DIAG_BOOT_DEVICE_SEL_32HCDW (0x00001800) + +#define MPI2_DIAG_CLEAR_FLASH_BAD_SIG (0x00000400) +#define MPI2_DIAG_FORCE_HCB_ON_RESET (0x00000200) +#define MPI2_DIAG_HCB_MODE (0x00000100) +#define MPI2_DIAG_DIAG_WRITE_ENABLE (0x00000080) +#define MPI2_DIAG_FLASH_BAD_SIG (0x00000040) +#define MPI2_DIAG_RESET_HISTORY (0x00000020) +#define MPI2_DIAG_DIAG_RW_ENABLE (0x00000010) +#define MPI2_DIAG_RESET_ADAPTER (0x00000004) +#define MPI2_DIAG_HOLD_IOC_RESET (0x00000002) + +/* + *Offsets for DiagRWData and address + */ +#define MPI2_DIAG_RW_DATA_OFFSET (0x00000010) +#define MPI2_DIAG_RW_ADDRESS_LOW_OFFSET (0x00000014) +#define MPI2_DIAG_RW_ADDRESS_HIGH_OFFSET (0x00000018) + +/* + *Defines for the HostInterruptStatus register + */ +#define MPI2_HOST_INTERRUPT_STATUS_OFFSET (0x00000030) +#define MPI2_HIS_SYS2IOC_DB_STATUS (0x80000000) +#define MPI2_HIS_IOP_DOORBELL_STATUS MPI2_HIS_SYS2IOC_DB_STATUS +#define MPI2_HIS_RESET_IRQ_STATUS (0x40000000) +#define MPI2_HIS_REPLY_DESCRIPTOR_INTERRUPT (0x00000008) +#define MPI2_HIS_IOC2SYS_DB_STATUS (0x00000001) +#define MPI2_HIS_DOORBELL_INTERRUPT MPI2_HIS_IOC2SYS_DB_STATUS + +/* + *Defines for the HostInterruptMask register + */ +#define MPI2_HOST_INTERRUPT_MASK_OFFSET (0x00000034) +#define MPI2_HIM_RESET_IRQ_MASK (0x40000000) +#define MPI2_HIM_REPLY_INT_MASK (0x00000008) +#define MPI2_HIM_RIM MPI2_HIM_REPLY_INT_MASK +#define MPI2_HIM_IOC2SYS_DB_MASK (0x00000001) +#define MPI2_HIM_DIM MPI2_HIM_IOC2SYS_DB_MASK + +/* + *Offsets for DCRData and address + */ +#define MPI2_DCR_DATA_OFFSET (0x00000038) +#define MPI2_DCR_ADDRESS_OFFSET (0x0000003C) + +/* + *Offset for the Reply Free Queue + */ +#define MPI2_REPLY_FREE_HOST_INDEX_OFFSET (0x00000048) + +/* + *Defines for the Reply Descriptor Post Queue + */ +#define MPI2_REPLY_POST_HOST_INDEX_OFFSET (0x0000006C) +#define MPI2_REPLY_POST_HOST_INDEX_MASK (0x00FFFFFF) +#define MPI2_RPHI_MSIX_INDEX_MASK (0xFF000000) +#define MPI2_RPHI_MSIX_INDEX_SHIFT (24) +#define MPI25_SUP_REPLY_POST_HOST_INDEX_OFFSET (0x0000030C) /*MPI v2.5 only*/ + + +/* + *Defines for the HCBSize and address + */ +#define MPI2_HCB_SIZE_OFFSET (0x00000074) +#define MPI2_HCB_SIZE_SIZE_MASK (0xFFFFF000) +#define MPI2_HCB_SIZE_HCB_ENABLE (0x00000001) + +#define MPI2_HCB_ADDRESS_LOW_OFFSET (0x00000078) +#define MPI2_HCB_ADDRESS_HIGH_OFFSET (0x0000007C) + +/* + *Offsets for the Scratchpad registers + */ +#define MPI26_SCRATCHPAD0_OFFSET (0x000000B0) +#define MPI26_SCRATCHPAD1_OFFSET (0x000000B4) +#define MPI26_SCRATCHPAD2_OFFSET (0x000000B8) +#define MPI26_SCRATCHPAD3_OFFSET (0x000000BC) + +/* + *Offsets for the Request Descriptor Post Queue + */ +#define MPI2_REQUEST_DESCRIPTOR_POST_LOW_OFFSET (0x000000C0) +#define MPI2_REQUEST_DESCRIPTOR_POST_HIGH_OFFSET (0x000000C4) +#define MPI26_ATOMIC_REQUEST_DESCRIPTOR_POST_OFFSET (0x000000C8) + +/*Hard Reset delay timings */ +#define MPI2_HARD_RESET_PCIE_FIRST_READ_DELAY_MICRO_SEC (50000) +#define MPI2_HARD_RESET_PCIE_RESET_READ_WINDOW_MICRO_SEC (255000) +#define MPI2_HARD_RESET_PCIE_SECOND_READ_DELAY_MICRO_SEC (256000) + +/***************************************************************************** +* +* Message Descriptors +* +*****************************************************************************/ + +/*Request Descriptors */ + +/*Default Request Descriptor */ +typedef struct _MPI2_DEFAULT_REQUEST_DESCRIPTOR { + U8 RequestFlags; /*0x00 */ + U8 MSIxIndex; /*0x01 */ + U16 SMID; /*0x02 */ + U16 LMID; /*0x04 */ + U16 DescriptorTypeDependent; /*0x06 */ +} MPI2_DEFAULT_REQUEST_DESCRIPTOR, + *PTR_MPI2_DEFAULT_REQUEST_DESCRIPTOR, + Mpi2DefaultRequestDescriptor_t, + *pMpi2DefaultRequestDescriptor_t; + +/*defines for the RequestFlags field */ +#define MPI2_REQ_DESCRIPT_FLAGS_TYPE_MASK (0x1E) +#define MPI2_REQ_DESCRIPT_FLAGS_TYPE_RSHIFT (1) +#define MPI2_REQ_DESCRIPT_FLAGS_SCSI_IO (0x00) +#define MPI2_REQ_DESCRIPT_FLAGS_SCSI_TARGET (0x02) +#define MPI2_REQ_DESCRIPT_FLAGS_HIGH_PRIORITY (0x06) +#define MPI2_REQ_DESCRIPT_FLAGS_DEFAULT_TYPE (0x08) +#define MPI2_REQ_DESCRIPT_FLAGS_RAID_ACCELERATOR (0x0A) +#define MPI25_REQ_DESCRIPT_FLAGS_FAST_PATH_SCSI_IO (0x0C) +#define MPI26_REQ_DESCRIPT_FLAGS_PCIE_ENCAPSULATED (0x10) + +#define MPI2_REQ_DESCRIPT_FLAGS_IOC_FIFO_MARKER (0x01) + +/*High Priority Request Descriptor */ +typedef struct _MPI2_HIGH_PRIORITY_REQUEST_DESCRIPTOR { + U8 RequestFlags; /*0x00 */ + U8 MSIxIndex; /*0x01 */ + U16 SMID; /*0x02 */ + U16 LMID; /*0x04 */ + U16 Reserved1; /*0x06 */ +} MPI2_HIGH_PRIORITY_REQUEST_DESCRIPTOR, + *PTR_MPI2_HIGH_PRIORITY_REQUEST_DESCRIPTOR, + Mpi2HighPriorityRequestDescriptor_t, + *pMpi2HighPriorityRequestDescriptor_t; + +/*SCSI IO Request Descriptor */ +typedef struct _MPI2_SCSI_IO_REQUEST_DESCRIPTOR { + U8 RequestFlags; /*0x00 */ + U8 MSIxIndex; /*0x01 */ + U16 SMID; /*0x02 */ + U16 LMID; /*0x04 */ + U16 DevHandle; /*0x06 */ +} MPI2_SCSI_IO_REQUEST_DESCRIPTOR, + *PTR_MPI2_SCSI_IO_REQUEST_DESCRIPTOR, + Mpi2SCSIIORequestDescriptor_t, + *pMpi2SCSIIORequestDescriptor_t; + +/*SCSI Target Request Descriptor */ +typedef struct _MPI2_SCSI_TARGET_REQUEST_DESCRIPTOR { + U8 RequestFlags; /*0x00 */ + U8 MSIxIndex; /*0x01 */ + U16 SMID; /*0x02 */ + U16 LMID; /*0x04 */ + U16 IoIndex; /*0x06 */ +} MPI2_SCSI_TARGET_REQUEST_DESCRIPTOR, + *PTR_MPI2_SCSI_TARGET_REQUEST_DESCRIPTOR, + Mpi2SCSITargetRequestDescriptor_t, + *pMpi2SCSITargetRequestDescriptor_t; + +/*RAID Accelerator Request Descriptor */ +typedef struct _MPI2_RAID_ACCEL_REQUEST_DESCRIPTOR { + U8 RequestFlags; /*0x00 */ + U8 MSIxIndex; /*0x01 */ + U16 SMID; /*0x02 */ + U16 LMID; /*0x04 */ + U16 Reserved; /*0x06 */ +} MPI2_RAID_ACCEL_REQUEST_DESCRIPTOR, + *PTR_MPI2_RAID_ACCEL_REQUEST_DESCRIPTOR, + Mpi2RAIDAcceleratorRequestDescriptor_t, + *pMpi2RAIDAcceleratorRequestDescriptor_t; + +/*Fast Path SCSI IO Request Descriptor */ +typedef MPI2_SCSI_IO_REQUEST_DESCRIPTOR + MPI25_FP_SCSI_IO_REQUEST_DESCRIPTOR, + *PTR_MPI25_FP_SCSI_IO_REQUEST_DESCRIPTOR, + Mpi25FastPathSCSIIORequestDescriptor_t, + *pMpi25FastPathSCSIIORequestDescriptor_t; + +/*PCIe Encapsulated Request Descriptor */ +typedef MPI2_SCSI_IO_REQUEST_DESCRIPTOR + MPI26_PCIE_ENCAPSULATED_REQUEST_DESCRIPTOR, + *PTR_MPI26_PCIE_ENCAPSULATED_REQUEST_DESCRIPTOR, + Mpi26PCIeEncapsulatedRequestDescriptor_t, + *pMpi26PCIeEncapsulatedRequestDescriptor_t; + +/*union of Request Descriptors */ +typedef union _MPI2_REQUEST_DESCRIPTOR_UNION { + MPI2_DEFAULT_REQUEST_DESCRIPTOR Default; + MPI2_HIGH_PRIORITY_REQUEST_DESCRIPTOR HighPriority; + MPI2_SCSI_IO_REQUEST_DESCRIPTOR SCSIIO; + MPI2_SCSI_TARGET_REQUEST_DESCRIPTOR SCSITarget; + MPI2_RAID_ACCEL_REQUEST_DESCRIPTOR RAIDAccelerator; + MPI25_FP_SCSI_IO_REQUEST_DESCRIPTOR FastPathSCSIIO; + MPI26_PCIE_ENCAPSULATED_REQUEST_DESCRIPTOR PCIeEncapsulated; + U64 Words; +} MPI2_REQUEST_DESCRIPTOR_UNION, + *PTR_MPI2_REQUEST_DESCRIPTOR_UNION, + Mpi2RequestDescriptorUnion_t, + *pMpi2RequestDescriptorUnion_t; + +/*Atomic Request Descriptors */ + +/* + * All Atomic Request Descriptors have the same format, so the following + * structure is used for all Atomic Request Descriptors: + * Atomic Default Request Descriptor + * Atomic High Priority Request Descriptor + * Atomic SCSI IO Request Descriptor + * Atomic SCSI Target Request Descriptor + * Atomic RAID Accelerator Request Descriptor + * Atomic Fast Path SCSI IO Request Descriptor + * Atomic PCIe Encapsulated Request Descriptor + */ + +/*Atomic Request Descriptor */ +typedef struct _MPI26_ATOMIC_REQUEST_DESCRIPTOR { + U8 RequestFlags; /* 0x00 */ + U8 MSIxIndex; /* 0x01 */ + U16 SMID; /* 0x02 */ +} MPI26_ATOMIC_REQUEST_DESCRIPTOR, + *PTR_MPI26_ATOMIC_REQUEST_DESCRIPTOR, + Mpi26AtomicRequestDescriptor_t, + *pMpi26AtomicRequestDescriptor_t; + +/*for the RequestFlags field, use the same + *defines as MPI2_DEFAULT_REQUEST_DESCRIPTOR + */ + +/*Reply Descriptors */ + +/*Default Reply Descriptor */ +typedef struct _MPI2_DEFAULT_REPLY_DESCRIPTOR { + U8 ReplyFlags; /*0x00 */ + U8 MSIxIndex; /*0x01 */ + U16 DescriptorTypeDependent1; /*0x02 */ + U32 DescriptorTypeDependent2; /*0x04 */ +} MPI2_DEFAULT_REPLY_DESCRIPTOR, + *PTR_MPI2_DEFAULT_REPLY_DESCRIPTOR, + Mpi2DefaultReplyDescriptor_t, + *pMpi2DefaultReplyDescriptor_t; + +/*defines for the ReplyFlags field */ +#define MPI2_RPY_DESCRIPT_FLAGS_TYPE_MASK (0x0F) +#define MPI2_RPY_DESCRIPT_FLAGS_SCSI_IO_SUCCESS (0x00) +#define MPI2_RPY_DESCRIPT_FLAGS_ADDRESS_REPLY (0x01) +#define MPI2_RPY_DESCRIPT_FLAGS_TARGETASSIST_SUCCESS (0x02) +#define MPI2_RPY_DESCRIPT_FLAGS_TARGET_COMMAND_BUFFER (0x03) +#define MPI2_RPY_DESCRIPT_FLAGS_RAID_ACCELERATOR_SUCCESS (0x05) +#define MPI25_RPY_DESCRIPT_FLAGS_FAST_PATH_SCSI_IO_SUCCESS (0x06) +#define MPI26_RPY_DESCRIPT_FLAGS_PCIE_ENCAPSULATED_SUCCESS (0x08) +#define MPI2_RPY_DESCRIPT_FLAGS_UNUSED (0x0F) + +/*values for marking a reply descriptor as unused */ +#define MPI2_RPY_DESCRIPT_UNUSED_WORD0_MARK (0xFFFFFFFF) +#define MPI2_RPY_DESCRIPT_UNUSED_WORD1_MARK (0xFFFFFFFF) + +/*Address Reply Descriptor */ +typedef struct _MPI2_ADDRESS_REPLY_DESCRIPTOR { + U8 ReplyFlags; /*0x00 */ + U8 MSIxIndex; /*0x01 */ + U16 SMID; /*0x02 */ + U32 ReplyFrameAddress; /*0x04 */ +} MPI2_ADDRESS_REPLY_DESCRIPTOR, + *PTR_MPI2_ADDRESS_REPLY_DESCRIPTOR, + Mpi2AddressReplyDescriptor_t, + *pMpi2AddressReplyDescriptor_t; + +#define MPI2_ADDRESS_REPLY_SMID_INVALID (0x00) + +/*SCSI IO Success Reply Descriptor */ +typedef struct _MPI2_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR { + U8 ReplyFlags; /*0x00 */ + U8 MSIxIndex; /*0x01 */ + U16 SMID; /*0x02 */ + U16 TaskTag; /*0x04 */ + U16 Reserved1; /*0x06 */ +} MPI2_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR, + *PTR_MPI2_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR, + Mpi2SCSIIOSuccessReplyDescriptor_t, + *pMpi2SCSIIOSuccessReplyDescriptor_t; + +/*TargetAssist Success Reply Descriptor */ +typedef struct _MPI2_TARGETASSIST_SUCCESS_REPLY_DESCRIPTOR { + U8 ReplyFlags; /*0x00 */ + U8 MSIxIndex; /*0x01 */ + U16 SMID; /*0x02 */ + U8 SequenceNumber; /*0x04 */ + U8 Reserved1; /*0x05 */ + U16 IoIndex; /*0x06 */ +} MPI2_TARGETASSIST_SUCCESS_REPLY_DESCRIPTOR, + *PTR_MPI2_TARGETASSIST_SUCCESS_REPLY_DESCRIPTOR, + Mpi2TargetAssistSuccessReplyDescriptor_t, + *pMpi2TargetAssistSuccessReplyDescriptor_t; + +/*Target Command Buffer Reply Descriptor */ +typedef struct _MPI2_TARGET_COMMAND_BUFFER_REPLY_DESCRIPTOR { + U8 ReplyFlags; /*0x00 */ + U8 MSIxIndex; /*0x01 */ + U8 VP_ID; /*0x02 */ + U8 Flags; /*0x03 */ + U16 InitiatorDevHandle; /*0x04 */ + U16 IoIndex; /*0x06 */ +} MPI2_TARGET_COMMAND_BUFFER_REPLY_DESCRIPTOR, + *PTR_MPI2_TARGET_COMMAND_BUFFER_REPLY_DESCRIPTOR, + Mpi2TargetCommandBufferReplyDescriptor_t, + *pMpi2TargetCommandBufferReplyDescriptor_t; + +/*defines for Flags field */ +#define MPI2_RPY_DESCRIPT_TCB_FLAGS_PHYNUM_MASK (0x3F) + +/*RAID Accelerator Success Reply Descriptor */ +typedef struct _MPI2_RAID_ACCELERATOR_SUCCESS_REPLY_DESCRIPTOR { + U8 ReplyFlags; /*0x00 */ + U8 MSIxIndex; /*0x01 */ + U16 SMID; /*0x02 */ + U32 Reserved; /*0x04 */ +} MPI2_RAID_ACCELERATOR_SUCCESS_REPLY_DESCRIPTOR, + *PTR_MPI2_RAID_ACCELERATOR_SUCCESS_REPLY_DESCRIPTOR, + Mpi2RAIDAcceleratorSuccessReplyDescriptor_t, + *pMpi2RAIDAcceleratorSuccessReplyDescriptor_t; + +/*Fast Path SCSI IO Success Reply Descriptor */ +typedef MPI2_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR + MPI25_FP_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR, + *PTR_MPI25_FP_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR, + Mpi25FastPathSCSIIOSuccessReplyDescriptor_t, + *pMpi25FastPathSCSIIOSuccessReplyDescriptor_t; + +/*PCIe Encapsulated Success Reply Descriptor */ +typedef MPI2_RAID_ACCELERATOR_SUCCESS_REPLY_DESCRIPTOR + MPI26_PCIE_ENCAPSULATED_SUCCESS_REPLY_DESCRIPTOR, + *PTR_MPI26_PCIE_ENCAPSULATED_SUCCESS_REPLY_DESCRIPTOR, + Mpi26PCIeEncapsulatedSuccessReplyDescriptor_t, + *pMpi26PCIeEncapsulatedSuccessReplyDescriptor_t; + +/*union of Reply Descriptors */ +typedef union _MPI2_REPLY_DESCRIPTORS_UNION { + MPI2_DEFAULT_REPLY_DESCRIPTOR Default; + MPI2_ADDRESS_REPLY_DESCRIPTOR AddressReply; + MPI2_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR SCSIIOSuccess; + MPI2_TARGETASSIST_SUCCESS_REPLY_DESCRIPTOR TargetAssistSuccess; + MPI2_TARGET_COMMAND_BUFFER_REPLY_DESCRIPTOR TargetCommandBuffer; + MPI2_RAID_ACCELERATOR_SUCCESS_REPLY_DESCRIPTOR RAIDAcceleratorSuccess; + MPI25_FP_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR FastPathSCSIIOSuccess; + MPI26_PCIE_ENCAPSULATED_SUCCESS_REPLY_DESCRIPTOR + PCIeEncapsulatedSuccess; + U64 Words; +} MPI2_REPLY_DESCRIPTORS_UNION, + *PTR_MPI2_REPLY_DESCRIPTORS_UNION, + Mpi2ReplyDescriptorsUnion_t, + *pMpi2ReplyDescriptorsUnion_t; + +/***************************************************************************** +* +* Message Functions +* +*****************************************************************************/ + +#define MPI2_FUNCTION_SCSI_IO_REQUEST (0x00) +#define MPI2_FUNCTION_SCSI_TASK_MGMT (0x01) +#define MPI2_FUNCTION_IOC_INIT (0x02) +#define MPI2_FUNCTION_IOC_FACTS (0x03) +#define MPI2_FUNCTION_CONFIG (0x04) +#define MPI2_FUNCTION_PORT_FACTS (0x05) +#define MPI2_FUNCTION_PORT_ENABLE (0x06) +#define MPI2_FUNCTION_EVENT_NOTIFICATION (0x07) +#define MPI2_FUNCTION_EVENT_ACK (0x08) +#define MPI2_FUNCTION_FW_DOWNLOAD (0x09) +#define MPI2_FUNCTION_TARGET_ASSIST (0x0B) +#define MPI2_FUNCTION_TARGET_STATUS_SEND (0x0C) +#define MPI2_FUNCTION_TARGET_MODE_ABORT (0x0D) +#define MPI2_FUNCTION_FW_UPLOAD (0x12) +#define MPI2_FUNCTION_RAID_ACTION (0x15) +#define MPI2_FUNCTION_RAID_SCSI_IO_PASSTHROUGH (0x16) +#define MPI2_FUNCTION_TOOLBOX (0x17) +#define MPI2_FUNCTION_SCSI_ENCLOSURE_PROCESSOR (0x18) +#define MPI2_FUNCTION_SMP_PASSTHROUGH (0x1A) +#define MPI2_FUNCTION_SAS_IO_UNIT_CONTROL (0x1B) +#define MPI2_FUNCTION_IO_UNIT_CONTROL (0x1B) +#define MPI2_FUNCTION_SATA_PASSTHROUGH (0x1C) +#define MPI2_FUNCTION_DIAG_BUFFER_POST (0x1D) +#define MPI2_FUNCTION_DIAG_RELEASE (0x1E) +#define MPI2_FUNCTION_TARGET_CMD_BUF_BASE_POST (0x24) +#define MPI2_FUNCTION_TARGET_CMD_BUF_LIST_POST (0x25) +#define MPI2_FUNCTION_RAID_ACCELERATOR (0x2C) +#define MPI2_FUNCTION_HOST_BASED_DISCOVERY_ACTION (0x2F) +#define MPI2_FUNCTION_PWR_MGMT_CONTROL (0x30) +#define MPI2_FUNCTION_SEND_HOST_MESSAGE (0x31) +#define MPI2_FUNCTION_NVME_ENCAPSULATED (0x33) +#define MPI2_FUNCTION_MIN_PRODUCT_SPECIFIC (0xF0) +#define MPI2_FUNCTION_MAX_PRODUCT_SPECIFIC (0xFF) + +/*Doorbell functions */ +#define MPI2_FUNCTION_IOC_MESSAGE_UNIT_RESET (0x40) +#define MPI2_FUNCTION_HANDSHAKE (0x42) + +/***************************************************************************** +* +* IOC Status Values +* +*****************************************************************************/ + +/*mask for IOCStatus status value */ +#define MPI2_IOCSTATUS_MASK (0x7FFF) + +/**************************************************************************** +* Common IOCStatus values for all replies +****************************************************************************/ + +#define MPI2_IOCSTATUS_SUCCESS (0x0000) +#define MPI2_IOCSTATUS_INVALID_FUNCTION (0x0001) +#define MPI2_IOCSTATUS_BUSY (0x0002) +#define MPI2_IOCSTATUS_INVALID_SGL (0x0003) +#define MPI2_IOCSTATUS_INTERNAL_ERROR (0x0004) +#define MPI2_IOCSTATUS_INVALID_VPID (0x0005) +#define MPI2_IOCSTATUS_INSUFFICIENT_RESOURCES (0x0006) +#define MPI2_IOCSTATUS_INVALID_FIELD (0x0007) +#define MPI2_IOCSTATUS_INVALID_STATE (0x0008) +#define MPI2_IOCSTATUS_OP_STATE_NOT_SUPPORTED (0x0009) +#define MPI2_IOCSTATUS_INSUFFICIENT_POWER (0x000A) + +/**************************************************************************** +* Config IOCStatus values +****************************************************************************/ + +#define MPI2_IOCSTATUS_CONFIG_INVALID_ACTION (0x0020) +#define MPI2_IOCSTATUS_CONFIG_INVALID_TYPE (0x0021) +#define MPI2_IOCSTATUS_CONFIG_INVALID_PAGE (0x0022) +#define MPI2_IOCSTATUS_CONFIG_INVALID_DATA (0x0023) +#define MPI2_IOCSTATUS_CONFIG_NO_DEFAULTS (0x0024) +#define MPI2_IOCSTATUS_CONFIG_CANT_COMMIT (0x0025) + +/**************************************************************************** +* SCSI IO Reply +****************************************************************************/ + +#define MPI2_IOCSTATUS_SCSI_RECOVERED_ERROR (0x0040) +#define MPI2_IOCSTATUS_SCSI_INVALID_DEVHANDLE (0x0042) +#define MPI2_IOCSTATUS_SCSI_DEVICE_NOT_THERE (0x0043) +#define MPI2_IOCSTATUS_SCSI_DATA_OVERRUN (0x0044) +#define MPI2_IOCSTATUS_SCSI_DATA_UNDERRUN (0x0045) +#define MPI2_IOCSTATUS_SCSI_IO_DATA_ERROR (0x0046) +#define MPI2_IOCSTATUS_SCSI_PROTOCOL_ERROR (0x0047) +#define MPI2_IOCSTATUS_SCSI_TASK_TERMINATED (0x0048) +#define MPI2_IOCSTATUS_SCSI_RESIDUAL_MISMATCH (0x0049) +#define MPI2_IOCSTATUS_SCSI_TASK_MGMT_FAILED (0x004A) +#define MPI2_IOCSTATUS_SCSI_IOC_TERMINATED (0x004B) +#define MPI2_IOCSTATUS_SCSI_EXT_TERMINATED (0x004C) + +/**************************************************************************** +* For use by SCSI Initiator and SCSI Target end-to-end data protection +****************************************************************************/ + +#define MPI2_IOCSTATUS_EEDP_GUARD_ERROR (0x004D) +#define MPI2_IOCSTATUS_EEDP_REF_TAG_ERROR (0x004E) +#define MPI2_IOCSTATUS_EEDP_APP_TAG_ERROR (0x004F) + +/**************************************************************************** +* SCSI Target values +****************************************************************************/ + +#define MPI2_IOCSTATUS_TARGET_INVALID_IO_INDEX (0x0062) +#define MPI2_IOCSTATUS_TARGET_ABORTED (0x0063) +#define MPI2_IOCSTATUS_TARGET_NO_CONN_RETRYABLE (0x0064) +#define MPI2_IOCSTATUS_TARGET_NO_CONNECTION (0x0065) +#define MPI2_IOCSTATUS_TARGET_XFER_COUNT_MISMATCH (0x006A) +#define MPI2_IOCSTATUS_TARGET_DATA_OFFSET_ERROR (0x006D) +#define MPI2_IOCSTATUS_TARGET_TOO_MUCH_WRITE_DATA (0x006E) +#define MPI2_IOCSTATUS_TARGET_IU_TOO_SHORT (0x006F) +#define MPI2_IOCSTATUS_TARGET_ACK_NAK_TIMEOUT (0x0070) +#define MPI2_IOCSTATUS_TARGET_NAK_RECEIVED (0x0071) + +/**************************************************************************** +* Serial Attached SCSI values +****************************************************************************/ + +#define MPI2_IOCSTATUS_SAS_SMP_REQUEST_FAILED (0x0090) +#define MPI2_IOCSTATUS_SAS_SMP_DATA_OVERRUN (0x0091) + +/**************************************************************************** +* Diagnostic Buffer Post / Diagnostic Release values +****************************************************************************/ + +#define MPI2_IOCSTATUS_DIAGNOSTIC_RELEASED (0x00A0) + +/**************************************************************************** +* RAID Accelerator values +****************************************************************************/ + +#define MPI2_IOCSTATUS_RAID_ACCEL_ERROR (0x00B0) + +/**************************************************************************** +* IOCStatus flag to indicate that log info is available +****************************************************************************/ + +#define MPI2_IOCSTATUS_FLAG_LOG_INFO_AVAILABLE (0x8000) + +/**************************************************************************** +* IOCLogInfo Types +****************************************************************************/ + +#define MPI2_IOCLOGINFO_TYPE_MASK (0xF0000000) +#define MPI2_IOCLOGINFO_TYPE_SHIFT (28) +#define MPI2_IOCLOGINFO_TYPE_NONE (0x0) +#define MPI2_IOCLOGINFO_TYPE_SCSI (0x1) +#define MPI2_IOCLOGINFO_TYPE_FC (0x2) +#define MPI2_IOCLOGINFO_TYPE_SAS (0x3) +#define MPI2_IOCLOGINFO_TYPE_ISCSI (0x4) +#define MPI2_IOCLOGINFO_LOG_DATA_MASK (0x0FFFFFFF) + +/***************************************************************************** +* +* Standard Message Structures +* +*****************************************************************************/ + +/**************************************************************************** +*Request Message Header for all request messages +****************************************************************************/ + +typedef struct _MPI2_REQUEST_HEADER { + U16 FunctionDependent1; /*0x00 */ + U8 ChainOffset; /*0x02 */ + U8 Function; /*0x03 */ + U16 FunctionDependent2; /*0x04 */ + U8 FunctionDependent3; /*0x06 */ + U8 MsgFlags; /*0x07 */ + U8 VP_ID; /*0x08 */ + U8 VF_ID; /*0x09 */ + U16 Reserved1; /*0x0A */ +} MPI2_REQUEST_HEADER, *PTR_MPI2_REQUEST_HEADER, + MPI2RequestHeader_t, *pMPI2RequestHeader_t; + +/**************************************************************************** +* Default Reply +****************************************************************************/ + +typedef struct _MPI2_DEFAULT_REPLY { + U16 FunctionDependent1; /*0x00 */ + U8 MsgLength; /*0x02 */ + U8 Function; /*0x03 */ + U16 FunctionDependent2; /*0x04 */ + U8 FunctionDependent3; /*0x06 */ + U8 MsgFlags; /*0x07 */ + U8 VP_ID; /*0x08 */ + U8 VF_ID; /*0x09 */ + U16 Reserved1; /*0x0A */ + U16 FunctionDependent5; /*0x0C */ + U16 IOCStatus; /*0x0E */ + U32 IOCLogInfo; /*0x10 */ +} MPI2_DEFAULT_REPLY, *PTR_MPI2_DEFAULT_REPLY, + MPI2DefaultReply_t, *pMPI2DefaultReply_t; + +/*common version structure/union used in messages and configuration pages */ + +typedef struct _MPI2_VERSION_STRUCT { + U8 Dev; /*0x00 */ + U8 Unit; /*0x01 */ + U8 Minor; /*0x02 */ + U8 Major; /*0x03 */ +} MPI2_VERSION_STRUCT; + +typedef union _MPI2_VERSION_UNION { + MPI2_VERSION_STRUCT Struct; + U32 Word; +} MPI2_VERSION_UNION; + +/*LUN field defines, common to many structures */ +#define MPI2_LUN_FIRST_LEVEL_ADDRESSING (0x0000FFFF) +#define MPI2_LUN_SECOND_LEVEL_ADDRESSING (0xFFFF0000) +#define MPI2_LUN_THIRD_LEVEL_ADDRESSING (0x0000FFFF) +#define MPI2_LUN_FOURTH_LEVEL_ADDRESSING (0xFFFF0000) +#define MPI2_LUN_LEVEL_1_WORD (0xFF00) +#define MPI2_LUN_LEVEL_1_DWORD (0x0000FF00) + +/***************************************************************************** +* +* Fusion-MPT MPI Scatter Gather Elements +* +*****************************************************************************/ + +/**************************************************************************** +* MPI Simple Element structures +****************************************************************************/ + +typedef struct _MPI2_SGE_SIMPLE32 { + U32 FlagsLength; + U32 Address; +} MPI2_SGE_SIMPLE32, *PTR_MPI2_SGE_SIMPLE32, + Mpi2SGESimple32_t, *pMpi2SGESimple32_t; + +typedef struct _MPI2_SGE_SIMPLE64 { + U32 FlagsLength; + U64 Address; +} MPI2_SGE_SIMPLE64, *PTR_MPI2_SGE_SIMPLE64, + Mpi2SGESimple64_t, *pMpi2SGESimple64_t; + +typedef struct _MPI2_SGE_SIMPLE_UNION { + U32 FlagsLength; + union { + U32 Address32; + U64 Address64; + } u; +} MPI2_SGE_SIMPLE_UNION, + *PTR_MPI2_SGE_SIMPLE_UNION, + Mpi2SGESimpleUnion_t, + *pMpi2SGESimpleUnion_t; + +/**************************************************************************** +* MPI Chain Element structures - for MPI v2.0 products only +****************************************************************************/ + +typedef struct _MPI2_SGE_CHAIN32 { + U16 Length; + U8 NextChainOffset; + U8 Flags; + U32 Address; +} MPI2_SGE_CHAIN32, *PTR_MPI2_SGE_CHAIN32, + Mpi2SGEChain32_t, *pMpi2SGEChain32_t; + +typedef struct _MPI2_SGE_CHAIN64 { + U16 Length; + U8 NextChainOffset; + U8 Flags; + U64 Address; +} MPI2_SGE_CHAIN64, *PTR_MPI2_SGE_CHAIN64, + Mpi2SGEChain64_t, *pMpi2SGEChain64_t; + +typedef struct _MPI2_SGE_CHAIN_UNION { + U16 Length; + U8 NextChainOffset; + U8 Flags; + union { + U32 Address32; + U64 Address64; + } u; +} MPI2_SGE_CHAIN_UNION, + *PTR_MPI2_SGE_CHAIN_UNION, + Mpi2SGEChainUnion_t, + *pMpi2SGEChainUnion_t; + +/**************************************************************************** +* MPI Transaction Context Element structures - for MPI v2.0 products only +****************************************************************************/ + +typedef struct _MPI2_SGE_TRANSACTION32 { + U8 Reserved; + U8 ContextSize; + U8 DetailsLength; + U8 Flags; + U32 TransactionContext[1]; + U32 TransactionDetails[1]; +} MPI2_SGE_TRANSACTION32, + *PTR_MPI2_SGE_TRANSACTION32, + Mpi2SGETransaction32_t, + *pMpi2SGETransaction32_t; + +typedef struct _MPI2_SGE_TRANSACTION64 { + U8 Reserved; + U8 ContextSize; + U8 DetailsLength; + U8 Flags; + U32 TransactionContext[2]; + U32 TransactionDetails[1]; +} MPI2_SGE_TRANSACTION64, + *PTR_MPI2_SGE_TRANSACTION64, + Mpi2SGETransaction64_t, + *pMpi2SGETransaction64_t; + +typedef struct _MPI2_SGE_TRANSACTION96 { + U8 Reserved; + U8 ContextSize; + U8 DetailsLength; + U8 Flags; + U32 TransactionContext[3]; + U32 TransactionDetails[1]; +} MPI2_SGE_TRANSACTION96, *PTR_MPI2_SGE_TRANSACTION96, + Mpi2SGETransaction96_t, *pMpi2SGETransaction96_t; + +typedef struct _MPI2_SGE_TRANSACTION128 { + U8 Reserved; + U8 ContextSize; + U8 DetailsLength; + U8 Flags; + U32 TransactionContext[4]; + U32 TransactionDetails[1]; +} MPI2_SGE_TRANSACTION128, *PTR_MPI2_SGE_TRANSACTION128, + Mpi2SGETransaction_t128, *pMpi2SGETransaction_t128; + +typedef struct _MPI2_SGE_TRANSACTION_UNION { + U8 Reserved; + U8 ContextSize; + U8 DetailsLength; + U8 Flags; + union { + U32 TransactionContext32[1]; + U32 TransactionContext64[2]; + U32 TransactionContext96[3]; + U32 TransactionContext128[4]; + } u; + U32 TransactionDetails[1]; +} MPI2_SGE_TRANSACTION_UNION, + *PTR_MPI2_SGE_TRANSACTION_UNION, + Mpi2SGETransactionUnion_t, + *pMpi2SGETransactionUnion_t; + +/**************************************************************************** +* MPI SGE union for IO SGL's - for MPI v2.0 products only +****************************************************************************/ + +typedef struct _MPI2_MPI_SGE_IO_UNION { + union { + MPI2_SGE_SIMPLE_UNION Simple; + MPI2_SGE_CHAIN_UNION Chain; + } u; +} MPI2_MPI_SGE_IO_UNION, *PTR_MPI2_MPI_SGE_IO_UNION, + Mpi2MpiSGEIOUnion_t, *pMpi2MpiSGEIOUnion_t; + +/**************************************************************************** +* MPI SGE union for SGL's with Simple and Transaction elements - for MPI v2.0 products only +****************************************************************************/ + +typedef struct _MPI2_SGE_TRANS_SIMPLE_UNION { + union { + MPI2_SGE_SIMPLE_UNION Simple; + MPI2_SGE_TRANSACTION_UNION Transaction; + } u; +} MPI2_SGE_TRANS_SIMPLE_UNION, + *PTR_MPI2_SGE_TRANS_SIMPLE_UNION, + Mpi2SGETransSimpleUnion_t, + *pMpi2SGETransSimpleUnion_t; + +/**************************************************************************** +* All MPI SGE types union +****************************************************************************/ + +typedef struct _MPI2_MPI_SGE_UNION { + union { + MPI2_SGE_SIMPLE_UNION Simple; + MPI2_SGE_CHAIN_UNION Chain; + MPI2_SGE_TRANSACTION_UNION Transaction; + } u; +} MPI2_MPI_SGE_UNION, *PTR_MPI2_MPI_SGE_UNION, + Mpi2MpiSgeUnion_t, *pMpi2MpiSgeUnion_t; + +/**************************************************************************** +* MPI SGE field definition and masks +****************************************************************************/ + +/*Flags field bit definitions */ + +#define MPI2_SGE_FLAGS_LAST_ELEMENT (0x80) +#define MPI2_SGE_FLAGS_END_OF_BUFFER (0x40) +#define MPI2_SGE_FLAGS_ELEMENT_TYPE_MASK (0x30) +#define MPI2_SGE_FLAGS_LOCAL_ADDRESS (0x08) +#define MPI2_SGE_FLAGS_DIRECTION (0x04) +#define MPI2_SGE_FLAGS_ADDRESS_SIZE (0x02) +#define MPI2_SGE_FLAGS_END_OF_LIST (0x01) + +#define MPI2_SGE_FLAGS_SHIFT (24) + +#define MPI2_SGE_LENGTH_MASK (0x00FFFFFF) +#define MPI2_SGE_CHAIN_LENGTH_MASK (0x0000FFFF) + +/*Element Type */ + +#define MPI2_SGE_FLAGS_TRANSACTION_ELEMENT (0x00) +#define MPI2_SGE_FLAGS_SIMPLE_ELEMENT (0x10) +#define MPI2_SGE_FLAGS_CHAIN_ELEMENT (0x30) +#define MPI2_SGE_FLAGS_ELEMENT_MASK (0x30) + +/*Address location */ + +#define MPI2_SGE_FLAGS_SYSTEM_ADDRESS (0x00) + +/*Direction */ + +#define MPI2_SGE_FLAGS_IOC_TO_HOST (0x00) +#define MPI2_SGE_FLAGS_HOST_TO_IOC (0x04) + +#define MPI2_SGE_FLAGS_DEST (MPI2_SGE_FLAGS_IOC_TO_HOST) +#define MPI2_SGE_FLAGS_SOURCE (MPI2_SGE_FLAGS_HOST_TO_IOC) + +/*Address Size */ + +#define MPI2_SGE_FLAGS_32_BIT_ADDRESSING (0x00) +#define MPI2_SGE_FLAGS_64_BIT_ADDRESSING (0x02) + +/*Context Size */ + +#define MPI2_SGE_FLAGS_32_BIT_CONTEXT (0x00) +#define MPI2_SGE_FLAGS_64_BIT_CONTEXT (0x02) +#define MPI2_SGE_FLAGS_96_BIT_CONTEXT (0x04) +#define MPI2_SGE_FLAGS_128_BIT_CONTEXT (0x06) + +#define MPI2_SGE_CHAIN_OFFSET_MASK (0x00FF0000) +#define MPI2_SGE_CHAIN_OFFSET_SHIFT (16) + +/**************************************************************************** +* MPI SGE operation Macros +****************************************************************************/ + +/*SIMPLE FlagsLength manipulations... */ +#define MPI2_SGE_SET_FLAGS(f) ((U32)(f) << MPI2_SGE_FLAGS_SHIFT) +#define MPI2_SGE_GET_FLAGS(f) (((f) & ~MPI2_SGE_LENGTH_MASK) >> \ + MPI2_SGE_FLAGS_SHIFT) +#define MPI2_SGE_LENGTH(f) ((f) & MPI2_SGE_LENGTH_MASK) +#define MPI2_SGE_CHAIN_LENGTH(f) ((f) & MPI2_SGE_CHAIN_LENGTH_MASK) + +#define MPI2_SGE_SET_FLAGS_LENGTH(f, l) (MPI2_SGE_SET_FLAGS(f) | \ + MPI2_SGE_LENGTH(l)) + +#define MPI2_pSGE_GET_FLAGS(psg) MPI2_SGE_GET_FLAGS((psg)->FlagsLength) +#define MPI2_pSGE_GET_LENGTH(psg) MPI2_SGE_LENGTH((psg)->FlagsLength) +#define MPI2_pSGE_SET_FLAGS_LENGTH(psg, f, l) ((psg)->FlagsLength = \ + MPI2_SGE_SET_FLAGS_LENGTH(f, l)) + +/*CAUTION - The following are READ-MODIFY-WRITE! */ +#define MPI2_pSGE_SET_FLAGS(psg, f) ((psg)->FlagsLength |= \ + MPI2_SGE_SET_FLAGS(f)) +#define MPI2_pSGE_SET_LENGTH(psg, l) ((psg)->FlagsLength |= \ + MPI2_SGE_LENGTH(l)) + +#define MPI2_GET_CHAIN_OFFSET(x) ((x & MPI2_SGE_CHAIN_OFFSET_MASK) >> \ + MPI2_SGE_CHAIN_OFFSET_SHIFT) + +/***************************************************************************** +* +* Fusion-MPT IEEE Scatter Gather Elements +* +*****************************************************************************/ + +/**************************************************************************** +* IEEE Simple Element structures +****************************************************************************/ + +/*MPI2_IEEE_SGE_SIMPLE32 is for MPI v2.0 products only */ +typedef struct _MPI2_IEEE_SGE_SIMPLE32 { + U32 Address; + U32 FlagsLength; +} MPI2_IEEE_SGE_SIMPLE32, *PTR_MPI2_IEEE_SGE_SIMPLE32, + Mpi2IeeeSgeSimple32_t, *pMpi2IeeeSgeSimple32_t; + +typedef struct _MPI2_IEEE_SGE_SIMPLE64 { + U64 Address; + U32 Length; + U16 Reserved1; + U8 Reserved2; + U8 Flags; +} MPI2_IEEE_SGE_SIMPLE64, *PTR_MPI2_IEEE_SGE_SIMPLE64, + Mpi2IeeeSgeSimple64_t, *pMpi2IeeeSgeSimple64_t; + +typedef union _MPI2_IEEE_SGE_SIMPLE_UNION { + MPI2_IEEE_SGE_SIMPLE32 Simple32; + MPI2_IEEE_SGE_SIMPLE64 Simple64; +} MPI2_IEEE_SGE_SIMPLE_UNION, + *PTR_MPI2_IEEE_SGE_SIMPLE_UNION, + Mpi2IeeeSgeSimpleUnion_t, + *pMpi2IeeeSgeSimpleUnion_t; + +/**************************************************************************** +* IEEE Chain Element structures +****************************************************************************/ + +/*MPI2_IEEE_SGE_CHAIN32 is for MPI v2.0 products only */ +typedef MPI2_IEEE_SGE_SIMPLE32 MPI2_IEEE_SGE_CHAIN32; + +/*MPI2_IEEE_SGE_CHAIN64 is for MPI v2.0 products only */ +typedef MPI2_IEEE_SGE_SIMPLE64 MPI2_IEEE_SGE_CHAIN64; + +typedef union _MPI2_IEEE_SGE_CHAIN_UNION { + MPI2_IEEE_SGE_CHAIN32 Chain32; + MPI2_IEEE_SGE_CHAIN64 Chain64; +} MPI2_IEEE_SGE_CHAIN_UNION, + *PTR_MPI2_IEEE_SGE_CHAIN_UNION, + Mpi2IeeeSgeChainUnion_t, + *pMpi2IeeeSgeChainUnion_t; + +/*MPI25_IEEE_SGE_CHAIN64 is for MPI v2.5 and later */ +typedef struct _MPI25_IEEE_SGE_CHAIN64 { + U64 Address; + U32 Length; + U16 Reserved1; + U8 NextChainOffset; + U8 Flags; +} MPI25_IEEE_SGE_CHAIN64, + *PTR_MPI25_IEEE_SGE_CHAIN64, + Mpi25IeeeSgeChain64_t, + *pMpi25IeeeSgeChain64_t; + +/**************************************************************************** +* All IEEE SGE types union +****************************************************************************/ + +/*MPI2_IEEE_SGE_UNION is for MPI v2.0 products only */ +typedef struct _MPI2_IEEE_SGE_UNION { + union { + MPI2_IEEE_SGE_SIMPLE_UNION Simple; + MPI2_IEEE_SGE_CHAIN_UNION Chain; + } u; +} MPI2_IEEE_SGE_UNION, *PTR_MPI2_IEEE_SGE_UNION, + Mpi2IeeeSgeUnion_t, *pMpi2IeeeSgeUnion_t; + +/**************************************************************************** +* IEEE SGE union for IO SGL's +****************************************************************************/ + +typedef union _MPI25_SGE_IO_UNION { + MPI2_IEEE_SGE_SIMPLE64 IeeeSimple; + MPI25_IEEE_SGE_CHAIN64 IeeeChain; +} MPI25_SGE_IO_UNION, *PTR_MPI25_SGE_IO_UNION, + Mpi25SGEIOUnion_t, *pMpi25SGEIOUnion_t; + +/**************************************************************************** +* IEEE SGE field definitions and masks +****************************************************************************/ + +/*Flags field bit definitions */ + +#define MPI2_IEEE_SGE_FLAGS_ELEMENT_TYPE_MASK (0x80) +#define MPI25_IEEE_SGE_FLAGS_END_OF_LIST (0x40) + +#define MPI2_IEEE32_SGE_FLAGS_SHIFT (24) + +#define MPI2_IEEE32_SGE_LENGTH_MASK (0x00FFFFFF) + +/*Element Type */ + +#define MPI2_IEEE_SGE_FLAGS_SIMPLE_ELEMENT (0x00) +#define MPI2_IEEE_SGE_FLAGS_CHAIN_ELEMENT (0x80) + +/*Next Segment Format */ + +#define MPI26_IEEE_SGE_FLAGS_NSF_MASK (0x1C) +#define MPI26_IEEE_SGE_FLAGS_NSF_MPI_IEEE (0x00) +#define MPI26_IEEE_SGE_FLAGS_NSF_NVME_PRP (0x08) +#define MPI26_IEEE_SGE_FLAGS_NSF_NVME_SGL (0x10) + +/*Data Location Address Space */ + +#define MPI2_IEEE_SGE_FLAGS_ADDR_MASK (0x03) +#define MPI2_IEEE_SGE_FLAGS_SYSTEM_ADDR (0x00) +#define MPI2_IEEE_SGE_FLAGS_IOCDDR_ADDR (0x01) +#define MPI2_IEEE_SGE_FLAGS_IOCPLB_ADDR (0x02) +#define MPI2_IEEE_SGE_FLAGS_IOCPLBNTA_ADDR (0x03) +#define MPI2_IEEE_SGE_FLAGS_SYSTEMPLBPCI_ADDR (0x03) +#define MPI2_IEEE_SGE_FLAGS_SYSTEMPLBCPI_ADDR \ + (MPI2_IEEE_SGE_FLAGS_SYSTEMPLBPCI_ADDR) +#define MPI26_IEEE_SGE_FLAGS_IOCCTL_ADDR (0x02) + +/**************************************************************************** +* IEEE SGE operation Macros +****************************************************************************/ + +/*SIMPLE FlagsLength manipulations... */ +#define MPI2_IEEE32_SGE_SET_FLAGS(f) ((U32)(f) << MPI2_IEEE32_SGE_FLAGS_SHIFT) +#define MPI2_IEEE32_SGE_GET_FLAGS(f) (((f) & ~MPI2_IEEE32_SGE_LENGTH_MASK) \ + >> MPI2_IEEE32_SGE_FLAGS_SHIFT) +#define MPI2_IEEE32_SGE_LENGTH(f) ((f) & MPI2_IEEE32_SGE_LENGTH_MASK) + +#define MPI2_IEEE32_SGE_SET_FLAGS_LENGTH(f, l) (MPI2_IEEE32_SGE_SET_FLAGS(f) |\ + MPI2_IEEE32_SGE_LENGTH(l)) + +#define MPI2_IEEE32_pSGE_GET_FLAGS(psg) \ + MPI2_IEEE32_SGE_GET_FLAGS((psg)->FlagsLength) +#define MPI2_IEEE32_pSGE_GET_LENGTH(psg) \ + MPI2_IEEE32_SGE_LENGTH((psg)->FlagsLength) +#define MPI2_IEEE32_pSGE_SET_FLAGS_LENGTH(psg, f, l) ((psg)->FlagsLength = \ + MPI2_IEEE32_SGE_SET_FLAGS_LENGTH(f, l)) + +/*CAUTION - The following are READ-MODIFY-WRITE! */ +#define MPI2_IEEE32_pSGE_SET_FLAGS(psg, f) ((psg)->FlagsLength |= \ + MPI2_IEEE32_SGE_SET_FLAGS(f)) +#define MPI2_IEEE32_pSGE_SET_LENGTH(psg, l) ((psg)->FlagsLength |= \ + MPI2_IEEE32_SGE_LENGTH(l)) + +/***************************************************************************** +* +* Fusion-MPT MPI/IEEE Scatter Gather Unions +* +*****************************************************************************/ + +typedef union _MPI2_SIMPLE_SGE_UNION { + MPI2_SGE_SIMPLE_UNION MpiSimple; + MPI2_IEEE_SGE_SIMPLE_UNION IeeeSimple; +} MPI2_SIMPLE_SGE_UNION, *PTR_MPI2_SIMPLE_SGE_UNION, + Mpi2SimpleSgeUntion_t, *pMpi2SimpleSgeUntion_t; + +typedef union _MPI2_SGE_IO_UNION { + MPI2_SGE_SIMPLE_UNION MpiSimple; + MPI2_SGE_CHAIN_UNION MpiChain; + MPI2_IEEE_SGE_SIMPLE_UNION IeeeSimple; + MPI2_IEEE_SGE_CHAIN_UNION IeeeChain; +} MPI2_SGE_IO_UNION, *PTR_MPI2_SGE_IO_UNION, + Mpi2SGEIOUnion_t, *pMpi2SGEIOUnion_t; + +/**************************************************************************** +* +* Values for SGLFlags field, used in many request messages with an SGL +* +****************************************************************************/ + +/*values for MPI SGL Data Location Address Space subfield */ +#define MPI2_SGLFLAGS_ADDRESS_SPACE_MASK (0x0C) +#define MPI2_SGLFLAGS_SYSTEM_ADDRESS_SPACE (0x00) +#define MPI2_SGLFLAGS_IOCDDR_ADDRESS_SPACE (0x04) +#define MPI2_SGLFLAGS_IOCPLB_ADDRESS_SPACE (0x08) +#define MPI26_SGLFLAGS_IOCPLB_ADDRESS_SPACE (0x08) +#define MPI2_SGLFLAGS_IOCPLBNTA_ADDRESS_SPACE (0x0C) +/*values for SGL Type subfield */ +#define MPI2_SGLFLAGS_SGL_TYPE_MASK (0x03) +#define MPI2_SGLFLAGS_SGL_TYPE_MPI (0x00) +#define MPI2_SGLFLAGS_SGL_TYPE_IEEE32 (0x01) +#define MPI2_SGLFLAGS_SGL_TYPE_IEEE64 (0x02) + +#endif diff --git a/drivers/scsi/mpt3sas/mpi/mpi2_cnfg.h b/drivers/scsi/mpt3sas/mpi/mpi2_cnfg.h new file mode 100644 index 000000000..5122920a9 --- /dev/null +++ b/drivers/scsi/mpt3sas/mpi/mpi2_cnfg.h @@ -0,0 +1,4032 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright 2000-2015 Avago Technologies. All rights reserved. + * + * + * Name: mpi2_cnfg.h + * Title: MPI Configuration messages and pages + * Creation Date: November 10, 2006 + * + * mpi2_cnfg.h Version: 02.00.42 + * + * NOTE: Names (typedefs, defines, etc.) beginning with an MPI25 or Mpi25 + * prefix are for use only on MPI v2.5 products, and must not be used + * with MPI v2.0 products. Unless otherwise noted, names beginning with + * MPI2 or Mpi2 are for use with both MPI v2.0 and MPI v2.5 products. + * + * Version History + * --------------- + * + * Date Version Description + * -------- -------- ------------------------------------------------------ + * 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A. + * 06-04-07 02.00.01 Added defines for SAS IO Unit Page 2 PhyFlags. + * Added Manufacturing Page 11. + * Added MPI2_SAS_EXPANDER0_FLAGS_CONNECTOR_END_DEVICE + * define. + * 06-26-07 02.00.02 Adding generic structure for product-specific + * Manufacturing pages: MPI2_CONFIG_PAGE_MANUFACTURING_PS. + * Rework of BIOS Page 2 configuration page. + * Fixed MPI2_BIOSPAGE2_BOOT_DEVICE to be a union of the + * forms. + * Added configuration pages IOC Page 8 and Driver + * Persistent Mapping Page 0. + * 08-31-07 02.00.03 Modified configuration pages dealing with Integrated + * RAID (Manufacturing Page 4, RAID Volume Pages 0 and 1, + * RAID Physical Disk Pages 0 and 1, RAID Configuration + * Page 0). + * Added new value for AccessStatus field of SAS Device + * Page 0 (_SATA_NEEDS_INITIALIZATION). + * 10-31-07 02.00.04 Added missing SEPDevHandle field to + * MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0. + * 12-18-07 02.00.05 Modified IO Unit Page 0 to use 32-bit version fields for + * NVDATA. + * Modified IOC Page 7 to use masks and added field for + * SASBroadcastPrimitiveMasks. + * Added MPI2_CONFIG_PAGE_BIOS_4. + * Added MPI2_CONFIG_PAGE_LOG_0. + * 02-29-08 02.00.06 Modified various names to make them 32-character unique. + * Added SAS Device IDs. + * Updated Integrated RAID configuration pages including + * Manufacturing Page 4, IOC Page 6, and RAID Configuration + * Page 0. + * 05-21-08 02.00.07 Added define MPI2_MANPAGE4_MIX_SSD_SAS_SATA. + * Added define MPI2_MANPAGE4_PHYSDISK_128MB_COERCION. + * Fixed define MPI2_IOCPAGE8_FLAGS_ENCLOSURE_SLOT_MAPPING. + * Added missing MaxNumRoutedSasAddresses field to + * MPI2_CONFIG_PAGE_EXPANDER_0. + * Added SAS Port Page 0. + * Modified structure layout for + * MPI2_CONFIG_PAGE_DRIVER_MAPPING_0. + * 06-27-08 02.00.08 Changed MPI2_CONFIG_PAGE_RD_PDISK_1 to use + * MPI2_RAID_PHYS_DISK1_PATH_MAX to size the array. + * 10-02-08 02.00.09 Changed MPI2_RAID_PGAD_CONFIGNUM_MASK from 0x0000FFFF + * to 0x000000FF. + * Added two new values for the Physical Disk Coercion Size + * bits in the Flags field of Manufacturing Page 4. + * Added product-specific Manufacturing pages 16 to 31. + * Modified Flags bits for controlling write cache on SATA + * drives in IO Unit Page 1. + * Added new bit to AdditionalControlFlags of SAS IO Unit + * Page 1 to control Invalid Topology Correction. + * Added additional defines for RAID Volume Page 0 + * VolumeStatusFlags field. + * Modified meaning of RAID Volume Page 0 VolumeSettings + * define for auto-configure of hot-swap drives. + * Added SupportedPhysDisks field to RAID Volume Page 1 and + * added related defines. + * Added PhysDiskAttributes field (and related defines) to + * RAID Physical Disk Page 0. + * Added MPI2_SAS_PHYINFO_PHY_VACANT define. + * Added three new DiscoveryStatus bits for SAS IO Unit + * Page 0 and SAS Expander Page 0. + * Removed multiplexing information from SAS IO Unit pages. + * Added BootDeviceWaitTime field to SAS IO Unit Page 4. + * Removed Zone Address Resolved bit from PhyInfo and from + * Expander Page 0 Flags field. + * Added two new AccessStatus values to SAS Device Page 0 + * for indicating routing problems. Added 3 reserved words + * to this page. + * 01-19-09 02.00.10 Fixed defines for GPIOVal field of IO Unit Page 3. + * Inserted missing reserved field into structure for IOC + * Page 6. + * Added more pending task bits to RAID Volume Page 0 + * VolumeStatusFlags defines. + * Added MPI2_PHYSDISK0_STATUS_FLAG_NOT_CERTIFIED define. + * Added a new DiscoveryStatus bit for SAS IO Unit Page 0 + * and SAS Expander Page 0 to flag a downstream initiator + * when in simplified routing mode. + * Removed SATA Init Failure defines for DiscoveryStatus + * fields of SAS IO Unit Page 0 and SAS Expander Page 0. + * Added MPI2_SAS_DEVICE0_ASTATUS_DEVICE_BLOCKED define. + * Added PortGroups, DmaGroup, and ControlGroup fields to + * SAS Device Page 0. + * 05-06-09 02.00.11 Added structures and defines for IO Unit Page 5 and IO + * Unit Page 6. + * Added expander reduced functionality data to SAS + * Expander Page 0. + * Added SAS PHY Page 2 and SAS PHY Page 3. + * 07-30-09 02.00.12 Added IO Unit Page 7. + * Added new device ids. + * Added SAS IO Unit Page 5. + * Added partial and slumber power management capable flags + * to SAS Device Page 0 Flags field. + * Added PhyInfo defines for power condition. + * Added Ethernet configuration pages. + * 10-28-09 02.00.13 Added MPI2_IOUNITPAGE1_ENABLE_HOST_BASED_DISCOVERY. + * Added SAS PHY Page 4 structure and defines. + * 02-10-10 02.00.14 Modified the comments for the configuration page + * structures that contain an array of data. The host + * should use the "count" field in the page data (e.g. the + * NumPhys field) to determine the number of valid elements + * in the array. + * Added/modified some MPI2_MFGPAGE_DEVID_SAS defines. + * Added PowerManagementCapabilities to IO Unit Page 7. + * Added PortWidthModGroup field to + * MPI2_SAS_IO_UNIT5_PHY_PM_SETTINGS. + * Added MPI2_CONFIG_PAGE_SASIOUNIT_6 and related defines. + * Added MPI2_CONFIG_PAGE_SASIOUNIT_7 and related defines. + * Added MPI2_CONFIG_PAGE_SASIOUNIT_8 and related defines. + * 05-12-10 02.00.15 Added MPI2_RAIDVOL0_STATUS_FLAG_VOL_NOT_CONSISTENT + * define. + * Added MPI2_PHYSDISK0_INCOMPATIBLE_MEDIA_TYPE define. + * Added MPI2_SAS_NEG_LINK_RATE_UNSUPPORTED_PHY define. + * 08-11-10 02.00.16 Removed IO Unit Page 1 device path (multi-pathing) + * defines. + * 11-10-10 02.00.17 Added ReceptacleID field (replacing Reserved1) to + * MPI2_MANPAGE7_CONNECTOR_INFO and reworked defines for + * the Pinout field. + * Added BoardTemperature and BoardTemperatureUnits fields + * to MPI2_CONFIG_PAGE_IO_UNIT_7. + * Added MPI2_CONFIG_EXTPAGETYPE_EXT_MANUFACTURING define + * and MPI2_CONFIG_PAGE_EXT_MAN_PS structure. + * 02-23-11 02.00.18 Added ProxyVF_ID field to MPI2_CONFIG_REQUEST. + * Added IO Unit Page 8, IO Unit Page 9, + * and IO Unit Page 10. + * Added SASNotifyPrimitiveMasks field to + * MPI2_CONFIG_PAGE_IOC_7. + * 03-09-11 02.00.19 Fixed IO Unit Page 10 (to match the spec). + * 05-25-11 02.00.20 Cleaned up a few comments. + * 08-24-11 02.00.21 Marked the IO Unit Page 7 PowerManagementCapabilities + * for PCIe link as obsolete. + * Added SpinupFlags field containing a Disable Spin-up bit + * to the MPI2_SAS_IOUNIT4_SPINUP_GROUP fields of SAS IO + * Unit Page 4. + * 11-18-11 02.00.22 Added define MPI2_IOCPAGE6_CAP_FLAGS_4K_SECTORS_SUPPORT. + * Added UEFIVersion field to BIOS Page 1 and defined new + * BiosOptions bits. + * Incorporating additions for MPI v2.5. + * 11-27-12 02.00.23 Added MPI2_MANPAGE7_FLAG_EVENTREPLAY_SLOT_ORDER. + * Added MPI2_BIOSPAGE1_OPTIONS_MASK_OEM_ID. + * 12-20-12 02.00.24 Marked MPI2_SASIOUNIT1_CONTROL_CLEAR_AFFILIATION as + * obsolete for MPI v2.5 and later. + * Added some defines for 12G SAS speeds. + * 04-09-13 02.00.25 Added MPI2_IOUNITPAGE1_ATA_SECURITY_FREEZE_LOCK. + * Fixed MPI2_IOUNITPAGE5_DMA_CAP_MASK_MAX_REQUESTS to + * match the specification. + * 08-19-13 02.00.26 Added reserved words to MPI2_CONFIG_PAGE_IO_UNIT_7 for + * future use. + * 12-05-13 02.00.27 Added MPI2_MANPAGE7_FLAG_BASE_ENCLOSURE_LEVEL for + * MPI2_CONFIG_PAGE_MAN_7. + * Added EnclosureLevel and ConnectorName fields to + * MPI2_CONFIG_PAGE_SAS_DEV_0. + * Added MPI2_SAS_DEVICE0_FLAGS_ENCL_LEVEL_VALID for + * MPI2_CONFIG_PAGE_SAS_DEV_0. + * Added EnclosureLevel field to + * MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0. + * Added MPI2_SAS_ENCLS0_FLAGS_ENCL_LEVEL_VALID for + * MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0. + * 01-08-14 02.00.28 Added more defines for the BiosOptions field of + * MPI2_CONFIG_PAGE_BIOS_1. + * 06-13-14 02.00.29 Added SSUTimeout field to MPI2_CONFIG_PAGE_BIOS_1, and + * more defines for the BiosOptions field. + * 11-18-14 02.00.30 Updated copyright information. + * Added MPI2_BIOSPAGE1_OPTIONS_ADVANCED_CONFIG. + * Added AdapterOrderAux fields to BIOS Page 3. + * 03-16-15 02.00.31 Updated for MPI v2.6. + * Added Flags field to IO Unit Page 7. + * Added new SAS Phy Event codes + * 05-25-15 02.00.33 Added more defines for the BiosOptions field of + * MPI2_CONFIG_PAGE_BIOS_1. + * 08-25-15 02.00.34 Bumped Header Version. + * 12-18-15 02.00.35 Added SATADeviceWaitTime to SAS IO Unit Page 4. + * 01-21-16 02.00.36 Added/modified MPI2_MFGPAGE_DEVID_SAS defines. + * Added Link field to PCIe Link Pages + * Added EnclosureLevel and ConnectorName to PCIe + * Device Page 0. + * Added define for PCIE IoUnit page 1 max rate shift. + * Added comment for reserved ExtPageTypes. + * Added SAS 4 22.5 gbs speed support. + * Added PCIe 4 16.0 GT/sec speec support. + * Removed AHCI support. + * Removed SOP support. + * Added NegotiatedLinkRate and NegotiatedPortWidth to + * PCIe device page 0. + * 04-10-16 02.00.37 Fixed MPI2_MFGPAGE_DEVID_SAS3616/3708 defines + * 07-01-16 02.00.38 Added Manufacturing page 7 Connector types. + * Changed declaration of ConnectorName in PCIe DevicePage0 + * to match SAS DevicePage 0. + * Added SATADeviceWaitTime to IO Unit Page 11. + * Added MPI26_MFGPAGE_DEVID_SAS4008 + * Added x16 PCIe width to IO Unit Page 7 + * Added LINKFLAGS to control SRIS in PCIe IO Unit page 1 + * phy data. + * Added InitStatus to PCIe IO Unit Page 1 header. + * 09-01-16 02.00.39 Added MPI26_CONFIG_PAGE_ENCLOSURE_0 and related defines. + * Added MPI26_ENCLOS_PGAD_FORM_GET_NEXT_HANDLE and + * MPI26_ENCLOS_PGAD_FORM_HANDLE page address formats. + * 02-02-17 02.00.40 Added MPI2_MANPAGE7_SLOT_UNKNOWN. + * Added ChassisSlot field to SAS Enclosure Page 0. + * Added ChassisSlot Valid bit (bit 5) to the Flags field + * in SAS Enclosure Page 0. + * 06-13-17 02.00.41 Added MPI26_MFGPAGE_DEVID_SAS3816 and + * MPI26_MFGPAGE_DEVID_SAS3916 defines. + * Removed MPI26_MFGPAGE_DEVID_SAS4008 define. + * Added MPI26_PCIEIOUNIT1_LINKFLAGS_SRNS_EN define. + * Renamed PI26_PCIEIOUNIT1_LINKFLAGS_EN_SRIS to + * PI26_PCIEIOUNIT1_LINKFLAGS_SRIS_EN. + * Renamed MPI26_PCIEIOUNIT1_LINKFLAGS_DIS_SRIS to + * MPI26_PCIEIOUNIT1_LINKFLAGS_DIS_SEPARATE_REFCLK. + * 09-29-17 02.00.42 Added ControllerResetTO field to PCIe Device Page 2. + * Added NOIOB field to PCIe Device Page 2. + * Added MPI26_PCIEDEV2_CAP_DATA_BLK_ALIGN_AND_GRAN to + * the Capabilities field of PCIe Device Page 2. + * -------------------------------------------------------------------------- + */ + +#ifndef MPI2_CNFG_H +#define MPI2_CNFG_H + +/***************************************************************************** +* Configuration Page Header and defines +*****************************************************************************/ + +/*Config Page Header */ +typedef struct _MPI2_CONFIG_PAGE_HEADER { + U8 PageVersion; /*0x00 */ + U8 PageLength; /*0x01 */ + U8 PageNumber; /*0x02 */ + U8 PageType; /*0x03 */ +} MPI2_CONFIG_PAGE_HEADER, *PTR_MPI2_CONFIG_PAGE_HEADER, + Mpi2ConfigPageHeader_t, *pMpi2ConfigPageHeader_t; + +typedef union _MPI2_CONFIG_PAGE_HEADER_UNION { + MPI2_CONFIG_PAGE_HEADER Struct; + U8 Bytes[4]; + U16 Word16[2]; + U32 Word32; +} MPI2_CONFIG_PAGE_HEADER_UNION, *PTR_MPI2_CONFIG_PAGE_HEADER_UNION, + Mpi2ConfigPageHeaderUnion, *pMpi2ConfigPageHeaderUnion; + +/*Extended Config Page Header */ +typedef struct _MPI2_CONFIG_EXTENDED_PAGE_HEADER { + U8 PageVersion; /*0x00 */ + U8 Reserved1; /*0x01 */ + U8 PageNumber; /*0x02 */ + U8 PageType; /*0x03 */ + U16 ExtPageLength; /*0x04 */ + U8 ExtPageType; /*0x06 */ + U8 Reserved2; /*0x07 */ +} MPI2_CONFIG_EXTENDED_PAGE_HEADER, + *PTR_MPI2_CONFIG_EXTENDED_PAGE_HEADER, + Mpi2ConfigExtendedPageHeader_t, + *pMpi2ConfigExtendedPageHeader_t; + +typedef union _MPI2_CONFIG_EXT_PAGE_HEADER_UNION { + MPI2_CONFIG_PAGE_HEADER Struct; + MPI2_CONFIG_EXTENDED_PAGE_HEADER Ext; + U8 Bytes[8]; + U16 Word16[4]; + U32 Word32[2]; +} MPI2_CONFIG_EXT_PAGE_HEADER_UNION, + *PTR_MPI2_CONFIG_EXT_PAGE_HEADER_UNION, + Mpi2ConfigPageExtendedHeaderUnion, + *pMpi2ConfigPageExtendedHeaderUnion; + + +/*PageType field values */ +#define MPI2_CONFIG_PAGEATTR_READ_ONLY (0x00) +#define MPI2_CONFIG_PAGEATTR_CHANGEABLE (0x10) +#define MPI2_CONFIG_PAGEATTR_PERSISTENT (0x20) +#define MPI2_CONFIG_PAGEATTR_MASK (0xF0) + +#define MPI2_CONFIG_PAGETYPE_IO_UNIT (0x00) +#define MPI2_CONFIG_PAGETYPE_IOC (0x01) +#define MPI2_CONFIG_PAGETYPE_BIOS (0x02) +#define MPI2_CONFIG_PAGETYPE_RAID_VOLUME (0x08) +#define MPI2_CONFIG_PAGETYPE_MANUFACTURING (0x09) +#define MPI2_CONFIG_PAGETYPE_RAID_PHYSDISK (0x0A) +#define MPI2_CONFIG_PAGETYPE_EXTENDED (0x0F) +#define MPI2_CONFIG_PAGETYPE_MASK (0x0F) + +#define MPI2_CONFIG_TYPENUM_MASK (0x0FFF) + + +/*ExtPageType field values */ +#define MPI2_CONFIG_EXTPAGETYPE_SAS_IO_UNIT (0x10) +#define MPI2_CONFIG_EXTPAGETYPE_SAS_EXPANDER (0x11) +#define MPI2_CONFIG_EXTPAGETYPE_SAS_DEVICE (0x12) +#define MPI2_CONFIG_EXTPAGETYPE_SAS_PHY (0x13) +#define MPI2_CONFIG_EXTPAGETYPE_LOG (0x14) +#define MPI2_CONFIG_EXTPAGETYPE_ENCLOSURE (0x15) +#define MPI2_CONFIG_EXTPAGETYPE_RAID_CONFIG (0x16) +#define MPI2_CONFIG_EXTPAGETYPE_DRIVER_MAPPING (0x17) +#define MPI2_CONFIG_EXTPAGETYPE_SAS_PORT (0x18) +#define MPI2_CONFIG_EXTPAGETYPE_ETHERNET (0x19) +#define MPI2_CONFIG_EXTPAGETYPE_EXT_MANUFACTURING (0x1A) +#define MPI2_CONFIG_EXTPAGETYPE_PCIE_IO_UNIT (0x1B) +#define MPI2_CONFIG_EXTPAGETYPE_PCIE_SWITCH (0x1C) +#define MPI2_CONFIG_EXTPAGETYPE_PCIE_DEVICE (0x1D) +#define MPI2_CONFIG_EXTPAGETYPE_PCIE_LINK (0x1E) + + +/***************************************************************************** +* PageAddress defines +*****************************************************************************/ + +/*RAID Volume PageAddress format */ +#define MPI2_RAID_VOLUME_PGAD_FORM_MASK (0xF0000000) +#define MPI2_RAID_VOLUME_PGAD_FORM_GET_NEXT_HANDLE (0x00000000) +#define MPI2_RAID_VOLUME_PGAD_FORM_HANDLE (0x10000000) + +#define MPI2_RAID_VOLUME_PGAD_HANDLE_MASK (0x0000FFFF) + + +/*RAID Physical Disk PageAddress format */ +#define MPI2_PHYSDISK_PGAD_FORM_MASK (0xF0000000) +#define MPI2_PHYSDISK_PGAD_FORM_GET_NEXT_PHYSDISKNUM (0x00000000) +#define MPI2_PHYSDISK_PGAD_FORM_PHYSDISKNUM (0x10000000) +#define MPI2_PHYSDISK_PGAD_FORM_DEVHANDLE (0x20000000) + +#define MPI2_PHYSDISK_PGAD_PHYSDISKNUM_MASK (0x000000FF) +#define MPI2_PHYSDISK_PGAD_DEVHANDLE_MASK (0x0000FFFF) + + +/*SAS Expander PageAddress format */ +#define MPI2_SAS_EXPAND_PGAD_FORM_MASK (0xF0000000) +#define MPI2_SAS_EXPAND_PGAD_FORM_GET_NEXT_HNDL (0x00000000) +#define MPI2_SAS_EXPAND_PGAD_FORM_HNDL_PHY_NUM (0x10000000) +#define MPI2_SAS_EXPAND_PGAD_FORM_HNDL (0x20000000) + +#define MPI2_SAS_EXPAND_PGAD_HANDLE_MASK (0x0000FFFF) +#define MPI2_SAS_EXPAND_PGAD_PHYNUM_MASK (0x00FF0000) +#define MPI2_SAS_EXPAND_PGAD_PHYNUM_SHIFT (16) + + +/*SAS Device PageAddress format */ +#define MPI2_SAS_DEVICE_PGAD_FORM_MASK (0xF0000000) +#define MPI2_SAS_DEVICE_PGAD_FORM_GET_NEXT_HANDLE (0x00000000) +#define MPI2_SAS_DEVICE_PGAD_FORM_HANDLE (0x20000000) + +#define MPI2_SAS_DEVICE_PGAD_HANDLE_MASK (0x0000FFFF) + + +/*SAS PHY PageAddress format */ +#define MPI2_SAS_PHY_PGAD_FORM_MASK (0xF0000000) +#define MPI2_SAS_PHY_PGAD_FORM_PHY_NUMBER (0x00000000) +#define MPI2_SAS_PHY_PGAD_FORM_PHY_TBL_INDEX (0x10000000) + +#define MPI2_SAS_PHY_PGAD_PHY_NUMBER_MASK (0x000000FF) +#define MPI2_SAS_PHY_PGAD_PHY_TBL_INDEX_MASK (0x0000FFFF) + + +/*SAS Port PageAddress format */ +#define MPI2_SASPORT_PGAD_FORM_MASK (0xF0000000) +#define MPI2_SASPORT_PGAD_FORM_GET_NEXT_PORT (0x00000000) +#define MPI2_SASPORT_PGAD_FORM_PORT_NUM (0x10000000) + +#define MPI2_SASPORT_PGAD_PORTNUMBER_MASK (0x00000FFF) + + +/*SAS Enclosure PageAddress format */ +#define MPI2_SAS_ENCLOS_PGAD_FORM_MASK (0xF0000000) +#define MPI2_SAS_ENCLOS_PGAD_FORM_GET_NEXT_HANDLE (0x00000000) +#define MPI2_SAS_ENCLOS_PGAD_FORM_HANDLE (0x10000000) + +#define MPI2_SAS_ENCLOS_PGAD_HANDLE_MASK (0x0000FFFF) + +/*Enclosure PageAddress format */ +#define MPI26_ENCLOS_PGAD_FORM_MASK (0xF0000000) +#define MPI26_ENCLOS_PGAD_FORM_GET_NEXT_HANDLE (0x00000000) +#define MPI26_ENCLOS_PGAD_FORM_HANDLE (0x10000000) + +#define MPI26_ENCLOS_PGAD_HANDLE_MASK (0x0000FFFF) + +/*RAID Configuration PageAddress format */ +#define MPI2_RAID_PGAD_FORM_MASK (0xF0000000) +#define MPI2_RAID_PGAD_FORM_GET_NEXT_CONFIGNUM (0x00000000) +#define MPI2_RAID_PGAD_FORM_CONFIGNUM (0x10000000) +#define MPI2_RAID_PGAD_FORM_ACTIVE_CONFIG (0x20000000) + +#define MPI2_RAID_PGAD_CONFIGNUM_MASK (0x000000FF) + + +/*Driver Persistent Mapping PageAddress format */ +#define MPI2_DPM_PGAD_FORM_MASK (0xF0000000) +#define MPI2_DPM_PGAD_FORM_ENTRY_RANGE (0x00000000) + +#define MPI2_DPM_PGAD_ENTRY_COUNT_MASK (0x0FFF0000) +#define MPI2_DPM_PGAD_ENTRY_COUNT_SHIFT (16) +#define MPI2_DPM_PGAD_START_ENTRY_MASK (0x0000FFFF) + + +/*Ethernet PageAddress format */ +#define MPI2_ETHERNET_PGAD_FORM_MASK (0xF0000000) +#define MPI2_ETHERNET_PGAD_FORM_IF_NUM (0x00000000) + +#define MPI2_ETHERNET_PGAD_IF_NUMBER_MASK (0x000000FF) + + +/*PCIe Switch PageAddress format */ +#define MPI26_PCIE_SWITCH_PGAD_FORM_MASK (0xF0000000) +#define MPI26_PCIE_SWITCH_PGAD_FORM_GET_NEXT_HNDL (0x00000000) +#define MPI26_PCIE_SWITCH_PGAD_FORM_HNDL_PORTNUM (0x10000000) +#define MPI26_PCIE_SWITCH_EXPAND_PGAD_FORM_HNDL (0x20000000) + +#define MPI26_PCIE_SWITCH_PGAD_HANDLE_MASK (0x0000FFFF) +#define MPI26_PCIE_SWITCH_PGAD_PORTNUM_MASK (0x00FF0000) +#define MPI26_PCIE_SWITCH_PGAD_PORTNUM_SHIFT (16) + + +/*PCIe Device PageAddress format */ +#define MPI26_PCIE_DEVICE_PGAD_FORM_MASK (0xF0000000) +#define MPI26_PCIE_DEVICE_PGAD_FORM_GET_NEXT_HANDLE (0x00000000) +#define MPI26_PCIE_DEVICE_PGAD_FORM_HANDLE (0x20000000) + +#define MPI26_PCIE_DEVICE_PGAD_HANDLE_MASK (0x0000FFFF) + +/*PCIe Link PageAddress format */ +#define MPI26_PCIE_LINK_PGAD_FORM_MASK (0xF0000000) +#define MPI26_PCIE_LINK_PGAD_FORM_GET_NEXT_LINK (0x00000000) +#define MPI26_PCIE_LINK_PGAD_FORM_LINK_NUM (0x10000000) + +#define MPI26_PCIE_DEVICE_PGAD_LINKNUM_MASK (0x000000FF) + + + +/**************************************************************************** +* Configuration messages +****************************************************************************/ + +/*Configuration Request Message */ +typedef struct _MPI2_CONFIG_REQUEST { + U8 Action; /*0x00 */ + U8 SGLFlags; /*0x01 */ + U8 ChainOffset; /*0x02 */ + U8 Function; /*0x03 */ + U16 ExtPageLength; /*0x04 */ + U8 ExtPageType; /*0x06 */ + U8 MsgFlags; /*0x07 */ + U8 VP_ID; /*0x08 */ + U8 VF_ID; /*0x09 */ + U16 Reserved1; /*0x0A */ + U8 Reserved2; /*0x0C */ + U8 ProxyVF_ID; /*0x0D */ + U16 Reserved4; /*0x0E */ + U32 Reserved3; /*0x10 */ + MPI2_CONFIG_PAGE_HEADER Header; /*0x14 */ + U32 PageAddress; /*0x18 */ + MPI2_SGE_IO_UNION PageBufferSGE; /*0x1C */ +} MPI2_CONFIG_REQUEST, *PTR_MPI2_CONFIG_REQUEST, + Mpi2ConfigRequest_t, *pMpi2ConfigRequest_t; + +/*values for the Action field */ +#define MPI2_CONFIG_ACTION_PAGE_HEADER (0x00) +#define MPI2_CONFIG_ACTION_PAGE_READ_CURRENT (0x01) +#define MPI2_CONFIG_ACTION_PAGE_WRITE_CURRENT (0x02) +#define MPI2_CONFIG_ACTION_PAGE_DEFAULT (0x03) +#define MPI2_CONFIG_ACTION_PAGE_WRITE_NVRAM (0x04) +#define MPI2_CONFIG_ACTION_PAGE_READ_DEFAULT (0x05) +#define MPI2_CONFIG_ACTION_PAGE_READ_NVRAM (0x06) +#define MPI2_CONFIG_ACTION_PAGE_GET_CHANGEABLE (0x07) + +/*use MPI2_SGLFLAGS_ defines from mpi2.h for the SGLFlags field */ + + +/*Config Reply Message */ +typedef struct _MPI2_CONFIG_REPLY { + U8 Action; /*0x00 */ + U8 SGLFlags; /*0x01 */ + U8 MsgLength; /*0x02 */ + U8 Function; /*0x03 */ + U16 ExtPageLength; /*0x04 */ + U8 ExtPageType; /*0x06 */ + U8 MsgFlags; /*0x07 */ + U8 VP_ID; /*0x08 */ + U8 VF_ID; /*0x09 */ + U16 Reserved1; /*0x0A */ + U16 Reserved2; /*0x0C */ + U16 IOCStatus; /*0x0E */ + U32 IOCLogInfo; /*0x10 */ + MPI2_CONFIG_PAGE_HEADER Header; /*0x14 */ +} MPI2_CONFIG_REPLY, *PTR_MPI2_CONFIG_REPLY, + Mpi2ConfigReply_t, *pMpi2ConfigReply_t; + + + +/***************************************************************************** +* +* C o n f i g u r a t i o n P a g e s +* +*****************************************************************************/ + +/**************************************************************************** +* Manufacturing Config pages +****************************************************************************/ + +#define MPI2_MFGPAGE_VENDORID_LSI (0x1000) + +/*MPI v2.0 SAS products */ +#define MPI2_MFGPAGE_DEVID_SAS2004 (0x0070) +#define MPI2_MFGPAGE_DEVID_SAS2008 (0x0072) +#define MPI2_MFGPAGE_DEVID_SAS2108_1 (0x0074) +#define MPI2_MFGPAGE_DEVID_SAS2108_2 (0x0076) +#define MPI2_MFGPAGE_DEVID_SAS2108_3 (0x0077) +#define MPI2_MFGPAGE_DEVID_SAS2116_1 (0x0064) +#define MPI2_MFGPAGE_DEVID_SAS2116_2 (0x0065) + +#define MPI2_MFGPAGE_DEVID_SSS6200 (0x007E) + +#define MPI2_MFGPAGE_DEVID_SAS2208_1 (0x0080) +#define MPI2_MFGPAGE_DEVID_SAS2208_2 (0x0081) +#define MPI2_MFGPAGE_DEVID_SAS2208_3 (0x0082) +#define MPI2_MFGPAGE_DEVID_SAS2208_4 (0x0083) +#define MPI2_MFGPAGE_DEVID_SAS2208_5 (0x0084) +#define MPI2_MFGPAGE_DEVID_SAS2208_6 (0x0085) +#define MPI2_MFGPAGE_DEVID_SAS2308_1 (0x0086) +#define MPI2_MFGPAGE_DEVID_SAS2308_2 (0x0087) +#define MPI2_MFGPAGE_DEVID_SAS2308_3 (0x006E) +#define MPI2_MFGPAGE_DEVID_SAS2308_MPI_EP (0x02B0) + +/*MPI v2.5 SAS products */ +#define MPI25_MFGPAGE_DEVID_SAS3004 (0x0096) +#define MPI25_MFGPAGE_DEVID_SAS3008 (0x0097) +#define MPI25_MFGPAGE_DEVID_SAS3108_1 (0x0090) +#define MPI25_MFGPAGE_DEVID_SAS3108_2 (0x0091) +#define MPI25_MFGPAGE_DEVID_SAS3108_5 (0x0094) +#define MPI25_MFGPAGE_DEVID_SAS3108_6 (0x0095) + +/* MPI v2.6 SAS Products */ +#define MPI26_MFGPAGE_DEVID_SAS3216 (0x00C9) +#define MPI26_MFGPAGE_DEVID_SAS3224 (0x00C4) +#define MPI26_MFGPAGE_DEVID_SAS3316_1 (0x00C5) +#define MPI26_MFGPAGE_DEVID_SAS3316_2 (0x00C6) +#define MPI26_MFGPAGE_DEVID_SAS3316_3 (0x00C7) +#define MPI26_MFGPAGE_DEVID_SAS3316_4 (0x00C8) +#define MPI26_MFGPAGE_DEVID_SAS3324_1 (0x00C0) +#define MPI26_MFGPAGE_DEVID_SAS3324_2 (0x00C1) +#define MPI26_MFGPAGE_DEVID_SAS3324_3 (0x00C2) +#define MPI26_MFGPAGE_DEVID_SAS3324_4 (0x00C3) + +#define MPI26_MFGPAGE_DEVID_SAS3516 (0x00AA) +#define MPI26_MFGPAGE_DEVID_SAS3516_1 (0x00AB) +#define MPI26_MFGPAGE_DEVID_SAS3416 (0x00AC) +#define MPI26_MFGPAGE_DEVID_SAS3508 (0x00AD) +#define MPI26_MFGPAGE_DEVID_SAS3508_1 (0x00AE) +#define MPI26_MFGPAGE_DEVID_SAS3408 (0x00AF) +#define MPI26_MFGPAGE_DEVID_SAS3716 (0x00D0) +#define MPI26_MFGPAGE_DEVID_SAS3616 (0x00D1) +#define MPI26_MFGPAGE_DEVID_SAS3708 (0x00D2) + +#define MPI26_MFGPAGE_DEVID_SAS3816 (0x00A1) +#define MPI26_MFGPAGE_DEVID_SAS3916 (0x00A0) + + +/*Manufacturing Page 0 */ + +typedef struct _MPI2_CONFIG_PAGE_MAN_0 { + MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */ + U8 ChipName[16]; /*0x04 */ + U8 ChipRevision[8]; /*0x14 */ + U8 BoardName[16]; /*0x1C */ + U8 BoardAssembly[16]; /*0x2C */ + U8 BoardTracerNumber[16]; /*0x3C */ +} MPI2_CONFIG_PAGE_MAN_0, + *PTR_MPI2_CONFIG_PAGE_MAN_0, + Mpi2ManufacturingPage0_t, + *pMpi2ManufacturingPage0_t; + +#define MPI2_MANUFACTURING0_PAGEVERSION (0x00) + + +/*Manufacturing Page 1 */ + +typedef struct _MPI2_CONFIG_PAGE_MAN_1 { + MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */ + U8 VPD[256]; /*0x04 */ +} MPI2_CONFIG_PAGE_MAN_1, + *PTR_MPI2_CONFIG_PAGE_MAN_1, + Mpi2ManufacturingPage1_t, + *pMpi2ManufacturingPage1_t; + +#define MPI2_MANUFACTURING1_PAGEVERSION (0x00) + + +typedef struct _MPI2_CHIP_REVISION_ID { + U16 DeviceID; /*0x00 */ + U8 PCIRevisionID; /*0x02 */ + U8 Reserved; /*0x03 */ +} MPI2_CHIP_REVISION_ID, *PTR_MPI2_CHIP_REVISION_ID, + Mpi2ChipRevisionId_t, *pMpi2ChipRevisionId_t; + + +/*Manufacturing Page 2 */ + +/* + *Host code (drivers, BIOS, utilities, etc.) should leave this define set to + *one and check Header.PageLength at runtime. + */ +#ifndef MPI2_MAN_PAGE_2_HW_SETTINGS_WORDS +#define MPI2_MAN_PAGE_2_HW_SETTINGS_WORDS (1) +#endif + +typedef struct _MPI2_CONFIG_PAGE_MAN_2 { + MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */ + MPI2_CHIP_REVISION_ID ChipId; /*0x04 */ + U32 + HwSettings[MPI2_MAN_PAGE_2_HW_SETTINGS_WORDS];/*0x08 */ +} MPI2_CONFIG_PAGE_MAN_2, + *PTR_MPI2_CONFIG_PAGE_MAN_2, + Mpi2ManufacturingPage2_t, + *pMpi2ManufacturingPage2_t; + +#define MPI2_MANUFACTURING2_PAGEVERSION (0x00) + + +/*Manufacturing Page 3 */ + +/* + *Host code (drivers, BIOS, utilities, etc.) should leave this define set to + *one and check Header.PageLength at runtime. + */ +#ifndef MPI2_MAN_PAGE_3_INFO_WORDS +#define MPI2_MAN_PAGE_3_INFO_WORDS (1) +#endif + +typedef struct _MPI2_CONFIG_PAGE_MAN_3 { + MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */ + MPI2_CHIP_REVISION_ID ChipId; /*0x04 */ + U32 + Info[MPI2_MAN_PAGE_3_INFO_WORDS];/*0x08 */ +} MPI2_CONFIG_PAGE_MAN_3, + *PTR_MPI2_CONFIG_PAGE_MAN_3, + Mpi2ManufacturingPage3_t, + *pMpi2ManufacturingPage3_t; + +#define MPI2_MANUFACTURING3_PAGEVERSION (0x00) + + +/*Manufacturing Page 4 */ + +typedef struct _MPI2_MANPAGE4_PWR_SAVE_SETTINGS { + U8 PowerSaveFlags; /*0x00 */ + U8 InternalOperationsSleepTime; /*0x01 */ + U8 InternalOperationsRunTime; /*0x02 */ + U8 HostIdleTime; /*0x03 */ +} MPI2_MANPAGE4_PWR_SAVE_SETTINGS, + *PTR_MPI2_MANPAGE4_PWR_SAVE_SETTINGS, + Mpi2ManPage4PwrSaveSettings_t, + *pMpi2ManPage4PwrSaveSettings_t; + +/*defines for the PowerSaveFlags field */ +#define MPI2_MANPAGE4_MASK_POWERSAVE_MODE (0x03) +#define MPI2_MANPAGE4_POWERSAVE_MODE_DISABLED (0x00) +#define MPI2_MANPAGE4_CUSTOM_POWERSAVE_MODE (0x01) +#define MPI2_MANPAGE4_FULL_POWERSAVE_MODE (0x02) + +typedef struct _MPI2_CONFIG_PAGE_MAN_4 { + MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */ + U32 Reserved1; /*0x04 */ + U32 Flags; /*0x08 */ + U8 InquirySize; /*0x0C */ + U8 Reserved2; /*0x0D */ + U16 Reserved3; /*0x0E */ + U8 InquiryData[56]; /*0x10 */ + U32 RAID0VolumeSettings; /*0x48 */ + U32 RAID1EVolumeSettings; /*0x4C */ + U32 RAID1VolumeSettings; /*0x50 */ + U32 RAID10VolumeSettings; /*0x54 */ + U32 Reserved4; /*0x58 */ + U32 Reserved5; /*0x5C */ + MPI2_MANPAGE4_PWR_SAVE_SETTINGS PowerSaveSettings; /*0x60 */ + U8 MaxOCEDisks; /*0x64 */ + U8 ResyncRate; /*0x65 */ + U16 DataScrubDuration; /*0x66 */ + U8 MaxHotSpares; /*0x68 */ + U8 MaxPhysDisksPerVol; /*0x69 */ + U8 MaxPhysDisks; /*0x6A */ + U8 MaxVolumes; /*0x6B */ +} MPI2_CONFIG_PAGE_MAN_4, + *PTR_MPI2_CONFIG_PAGE_MAN_4, + Mpi2ManufacturingPage4_t, + *pMpi2ManufacturingPage4_t; + +#define MPI2_MANUFACTURING4_PAGEVERSION (0x0A) + +/*Manufacturing Page 4 Flags field */ +#define MPI2_MANPAGE4_METADATA_SIZE_MASK (0x00030000) +#define MPI2_MANPAGE4_METADATA_512MB (0x00000000) + +#define MPI2_MANPAGE4_MIX_SSD_SAS_SATA (0x00008000) +#define MPI2_MANPAGE4_MIX_SSD_AND_NON_SSD (0x00004000) +#define MPI2_MANPAGE4_HIDE_PHYSDISK_NON_IR (0x00002000) + +#define MPI2_MANPAGE4_MASK_PHYSDISK_COERCION (0x00001C00) +#define MPI2_MANPAGE4_PHYSDISK_COERCION_1GB (0x00000000) +#define MPI2_MANPAGE4_PHYSDISK_128MB_COERCION (0x00000400) +#define MPI2_MANPAGE4_PHYSDISK_ADAPTIVE_COERCION (0x00000800) +#define MPI2_MANPAGE4_PHYSDISK_ZERO_COERCION (0x00000C00) + +#define MPI2_MANPAGE4_MASK_BAD_BLOCK_MARKING (0x00000300) +#define MPI2_MANPAGE4_DEFAULT_BAD_BLOCK_MARKING (0x00000000) +#define MPI2_MANPAGE4_TABLE_BAD_BLOCK_MARKING (0x00000100) +#define MPI2_MANPAGE4_WRITE_LONG_BAD_BLOCK_MARKING (0x00000200) + +#define MPI2_MANPAGE4_FORCE_OFFLINE_FAILOVER (0x00000080) +#define MPI2_MANPAGE4_RAID10_DISABLE (0x00000040) +#define MPI2_MANPAGE4_RAID1E_DISABLE (0x00000020) +#define MPI2_MANPAGE4_RAID1_DISABLE (0x00000010) +#define MPI2_MANPAGE4_RAID0_DISABLE (0x00000008) +#define MPI2_MANPAGE4_IR_MODEPAGE8_DISABLE (0x00000004) +#define MPI2_MANPAGE4_IM_RESYNC_CACHE_ENABLE (0x00000002) +#define MPI2_MANPAGE4_IR_NO_MIX_SAS_SATA (0x00000001) + + +/*Manufacturing Page 5 */ + +/* + *Host code (drivers, BIOS, utilities, etc.) should leave this define set to + *one and check the value returned for NumPhys at runtime. + */ +#ifndef MPI2_MAN_PAGE_5_PHY_ENTRIES +#define MPI2_MAN_PAGE_5_PHY_ENTRIES (1) +#endif + +typedef struct _MPI2_MANUFACTURING5_ENTRY { + U64 WWID; /*0x00 */ + U64 DeviceName; /*0x08 */ +} MPI2_MANUFACTURING5_ENTRY, + *PTR_MPI2_MANUFACTURING5_ENTRY, + Mpi2Manufacturing5Entry_t, + *pMpi2Manufacturing5Entry_t; + +typedef struct _MPI2_CONFIG_PAGE_MAN_5 { + MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */ + U8 NumPhys; /*0x04 */ + U8 Reserved1; /*0x05 */ + U16 Reserved2; /*0x06 */ + U32 Reserved3; /*0x08 */ + U32 Reserved4; /*0x0C */ + MPI2_MANUFACTURING5_ENTRY + Phy[MPI2_MAN_PAGE_5_PHY_ENTRIES];/*0x08 */ +} MPI2_CONFIG_PAGE_MAN_5, + *PTR_MPI2_CONFIG_PAGE_MAN_5, + Mpi2ManufacturingPage5_t, + *pMpi2ManufacturingPage5_t; + +#define MPI2_MANUFACTURING5_PAGEVERSION (0x03) + + +/*Manufacturing Page 6 */ + +typedef struct _MPI2_CONFIG_PAGE_MAN_6 { + MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */ + U32 ProductSpecificInfo;/*0x04 */ +} MPI2_CONFIG_PAGE_MAN_6, + *PTR_MPI2_CONFIG_PAGE_MAN_6, + Mpi2ManufacturingPage6_t, + *pMpi2ManufacturingPage6_t; + +#define MPI2_MANUFACTURING6_PAGEVERSION (0x00) + + +/*Manufacturing Page 7 */ + +typedef struct _MPI2_MANPAGE7_CONNECTOR_INFO { + U32 Pinout; /*0x00 */ + U8 Connector[16]; /*0x04 */ + U8 Location; /*0x14 */ + U8 ReceptacleID; /*0x15 */ + U16 Slot; /*0x16 */ + U32 Reserved2; /*0x18 */ +} MPI2_MANPAGE7_CONNECTOR_INFO, + *PTR_MPI2_MANPAGE7_CONNECTOR_INFO, + Mpi2ManPage7ConnectorInfo_t, + *pMpi2ManPage7ConnectorInfo_t; + +/*defines for the Pinout field */ +#define MPI2_MANPAGE7_PINOUT_LANE_MASK (0x0000FF00) +#define MPI2_MANPAGE7_PINOUT_LANE_SHIFT (8) + +#define MPI2_MANPAGE7_PINOUT_TYPE_MASK (0x000000FF) +#define MPI2_MANPAGE7_PINOUT_TYPE_UNKNOWN (0x00) +#define MPI2_MANPAGE7_PINOUT_SATA_SINGLE (0x01) +#define MPI2_MANPAGE7_PINOUT_SFF_8482 (0x02) +#define MPI2_MANPAGE7_PINOUT_SFF_8486 (0x03) +#define MPI2_MANPAGE7_PINOUT_SFF_8484 (0x04) +#define MPI2_MANPAGE7_PINOUT_SFF_8087 (0x05) +#define MPI2_MANPAGE7_PINOUT_SFF_8643_4I (0x06) +#define MPI2_MANPAGE7_PINOUT_SFF_8643_8I (0x07) +#define MPI2_MANPAGE7_PINOUT_SFF_8470 (0x08) +#define MPI2_MANPAGE7_PINOUT_SFF_8088 (0x09) +#define MPI2_MANPAGE7_PINOUT_SFF_8644_4X (0x0A) +#define MPI2_MANPAGE7_PINOUT_SFF_8644_8X (0x0B) +#define MPI2_MANPAGE7_PINOUT_SFF_8644_16X (0x0C) +#define MPI2_MANPAGE7_PINOUT_SFF_8436 (0x0D) +#define MPI2_MANPAGE7_PINOUT_SFF_8088_A (0x0E) +#define MPI2_MANPAGE7_PINOUT_SFF_8643_16i (0x0F) +#define MPI2_MANPAGE7_PINOUT_SFF_8654_4i (0x10) +#define MPI2_MANPAGE7_PINOUT_SFF_8654_8i (0x11) +#define MPI2_MANPAGE7_PINOUT_SFF_8611_4i (0x12) +#define MPI2_MANPAGE7_PINOUT_SFF_8611_8i (0x13) + +/*defines for the Location field */ +#define MPI2_MANPAGE7_LOCATION_UNKNOWN (0x01) +#define MPI2_MANPAGE7_LOCATION_INTERNAL (0x02) +#define MPI2_MANPAGE7_LOCATION_EXTERNAL (0x04) +#define MPI2_MANPAGE7_LOCATION_SWITCHABLE (0x08) +#define MPI2_MANPAGE7_LOCATION_AUTO (0x10) +#define MPI2_MANPAGE7_LOCATION_NOT_PRESENT (0x20) +#define MPI2_MANPAGE7_LOCATION_NOT_CONNECTED (0x80) + +/*defines for the Slot field */ +#define MPI2_MANPAGE7_SLOT_UNKNOWN (0xFFFF) + +/* + *Host code (drivers, BIOS, utilities, etc.) should leave this define set to + *one and check the value returned for NumPhys at runtime. + */ +#ifndef MPI2_MANPAGE7_CONNECTOR_INFO_MAX +#define MPI2_MANPAGE7_CONNECTOR_INFO_MAX (1) +#endif + +typedef struct _MPI2_CONFIG_PAGE_MAN_7 { + MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */ + U32 Reserved1; /*0x04 */ + U32 Reserved2; /*0x08 */ + U32 Flags; /*0x0C */ + U8 EnclosureName[16]; /*0x10 */ + U8 NumPhys; /*0x20 */ + U8 Reserved3; /*0x21 */ + U16 Reserved4; /*0x22 */ + MPI2_MANPAGE7_CONNECTOR_INFO + ConnectorInfo[MPI2_MANPAGE7_CONNECTOR_INFO_MAX]; /*0x24 */ +} MPI2_CONFIG_PAGE_MAN_7, + *PTR_MPI2_CONFIG_PAGE_MAN_7, + Mpi2ManufacturingPage7_t, + *pMpi2ManufacturingPage7_t; + +#define MPI2_MANUFACTURING7_PAGEVERSION (0x01) + +/*defines for the Flags field */ +#define MPI2_MANPAGE7_FLAG_BASE_ENCLOSURE_LEVEL (0x00000008) +#define MPI2_MANPAGE7_FLAG_EVENTREPLAY_SLOT_ORDER (0x00000002) +#define MPI2_MANPAGE7_FLAG_USE_SLOT_INFO (0x00000001) + + +/* + *Generic structure to use for product-specific manufacturing pages + *(currently Manufacturing Page 8 through Manufacturing Page 31). + */ + +typedef struct _MPI2_CONFIG_PAGE_MAN_PS { + MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */ + U32 ProductSpecificInfo;/*0x04 */ +} MPI2_CONFIG_PAGE_MAN_PS, + *PTR_MPI2_CONFIG_PAGE_MAN_PS, + Mpi2ManufacturingPagePS_t, + *pMpi2ManufacturingPagePS_t; + +#define MPI2_MANUFACTURING8_PAGEVERSION (0x00) +#define MPI2_MANUFACTURING9_PAGEVERSION (0x00) +#define MPI2_MANUFACTURING10_PAGEVERSION (0x00) +#define MPI2_MANUFACTURING11_PAGEVERSION (0x00) +#define MPI2_MANUFACTURING12_PAGEVERSION (0x00) +#define MPI2_MANUFACTURING13_PAGEVERSION (0x00) +#define MPI2_MANUFACTURING14_PAGEVERSION (0x00) +#define MPI2_MANUFACTURING15_PAGEVERSION (0x00) +#define MPI2_MANUFACTURING16_PAGEVERSION (0x00) +#define MPI2_MANUFACTURING17_PAGEVERSION (0x00) +#define MPI2_MANUFACTURING18_PAGEVERSION (0x00) +#define MPI2_MANUFACTURING19_PAGEVERSION (0x00) +#define MPI2_MANUFACTURING20_PAGEVERSION (0x00) +#define MPI2_MANUFACTURING21_PAGEVERSION (0x00) +#define MPI2_MANUFACTURING22_PAGEVERSION (0x00) +#define MPI2_MANUFACTURING23_PAGEVERSION (0x00) +#define MPI2_MANUFACTURING24_PAGEVERSION (0x00) +#define MPI2_MANUFACTURING25_PAGEVERSION (0x00) +#define MPI2_MANUFACTURING26_PAGEVERSION (0x00) +#define MPI2_MANUFACTURING27_PAGEVERSION (0x00) +#define MPI2_MANUFACTURING28_PAGEVERSION (0x00) +#define MPI2_MANUFACTURING29_PAGEVERSION (0x00) +#define MPI2_MANUFACTURING30_PAGEVERSION (0x00) +#define MPI2_MANUFACTURING31_PAGEVERSION (0x00) + + +/**************************************************************************** +* IO Unit Config Pages +****************************************************************************/ + +/*IO Unit Page 0 */ + +typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_0 { + MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */ + U64 UniqueValue; /*0x04 */ + MPI2_VERSION_UNION NvdataVersionDefault; /*0x08 */ + MPI2_VERSION_UNION NvdataVersionPersistent; /*0x0A */ +} MPI2_CONFIG_PAGE_IO_UNIT_0, + *PTR_MPI2_CONFIG_PAGE_IO_UNIT_0, + Mpi2IOUnitPage0_t, *pMpi2IOUnitPage0_t; + +#define MPI2_IOUNITPAGE0_PAGEVERSION (0x02) + + +/*IO Unit Page 1 */ + +typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_1 { + MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */ + U32 Flags; /*0x04 */ +} MPI2_CONFIG_PAGE_IO_UNIT_1, + *PTR_MPI2_CONFIG_PAGE_IO_UNIT_1, + Mpi2IOUnitPage1_t, *pMpi2IOUnitPage1_t; + +#define MPI2_IOUNITPAGE1_PAGEVERSION (0x04) + +/*IO Unit Page 1 Flags defines */ +#define MPI2_IOUNITPAGE1_ATA_SECURITY_FREEZE_LOCK (0x00004000) +#define MPI25_IOUNITPAGE1_NEW_DEVICE_FAST_PATH_DISABLE (0x00002000) +#define MPI25_IOUNITPAGE1_DISABLE_FAST_PATH (0x00001000) +#define MPI2_IOUNITPAGE1_ENABLE_HOST_BASED_DISCOVERY (0x00000800) +#define MPI2_IOUNITPAGE1_MASK_SATA_WRITE_CACHE (0x00000600) +#define MPI2_IOUNITPAGE1_SATA_WRITE_CACHE_SHIFT (9) +#define MPI2_IOUNITPAGE1_ENABLE_SATA_WRITE_CACHE (0x00000000) +#define MPI2_IOUNITPAGE1_DISABLE_SATA_WRITE_CACHE (0x00000200) +#define MPI2_IOUNITPAGE1_UNCHANGED_SATA_WRITE_CACHE (0x00000400) +#define MPI2_IOUNITPAGE1_NATIVE_COMMAND_Q_DISABLE (0x00000100) +#define MPI2_IOUNITPAGE1_DISABLE_IR (0x00000040) +#define MPI2_IOUNITPAGE1_DISABLE_TASK_SET_FULL_HANDLING (0x00000020) +#define MPI2_IOUNITPAGE1_IR_USE_STATIC_VOLUME_ID (0x00000004) + + +/*IO Unit Page 3 */ + +/* + *Host code (drivers, BIOS, utilities, etc.) should leave this define set to + *one and check the value returned for GPIOCount at runtime. + */ +#ifndef MPI2_IO_UNIT_PAGE_3_GPIO_VAL_MAX +#define MPI2_IO_UNIT_PAGE_3_GPIO_VAL_MAX (1) +#endif + +typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_3 { + MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */ + U8 GPIOCount; /*0x04 */ + U8 Reserved1; /*0x05 */ + U16 Reserved2; /*0x06 */ + U16 + GPIOVal[MPI2_IO_UNIT_PAGE_3_GPIO_VAL_MAX];/*0x08 */ +} MPI2_CONFIG_PAGE_IO_UNIT_3, + *PTR_MPI2_CONFIG_PAGE_IO_UNIT_3, + Mpi2IOUnitPage3_t, *pMpi2IOUnitPage3_t; + +#define MPI2_IOUNITPAGE3_PAGEVERSION (0x01) + +/*defines for IO Unit Page 3 GPIOVal field */ +#define MPI2_IOUNITPAGE3_GPIO_FUNCTION_MASK (0xFFFC) +#define MPI2_IOUNITPAGE3_GPIO_FUNCTION_SHIFT (2) +#define MPI2_IOUNITPAGE3_GPIO_SETTING_OFF (0x0000) +#define MPI2_IOUNITPAGE3_GPIO_SETTING_ON (0x0001) + + +/*IO Unit Page 5 */ + +/* + *Upper layer code (drivers, utilities, etc.) should leave this define set to + *one and check the value returned for NumDmaEngines at runtime. + */ +#ifndef MPI2_IOUNITPAGE5_DMAENGINE_ENTRIES +#define MPI2_IOUNITPAGE5_DMAENGINE_ENTRIES (1) +#endif + +typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_5 { + MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */ + U64 + RaidAcceleratorBufferBaseAddress; /*0x04 */ + U64 + RaidAcceleratorBufferSize; /*0x0C */ + U64 + RaidAcceleratorControlBaseAddress; /*0x14 */ + U8 RAControlSize; /*0x1C */ + U8 NumDmaEngines; /*0x1D */ + U8 RAMinControlSize; /*0x1E */ + U8 RAMaxControlSize; /*0x1F */ + U32 Reserved1; /*0x20 */ + U32 Reserved2; /*0x24 */ + U32 Reserved3; /*0x28 */ + U32 + DmaEngineCapabilities[MPI2_IOUNITPAGE5_DMAENGINE_ENTRIES]; /*0x2C */ +} MPI2_CONFIG_PAGE_IO_UNIT_5, + *PTR_MPI2_CONFIG_PAGE_IO_UNIT_5, + Mpi2IOUnitPage5_t, *pMpi2IOUnitPage5_t; + +#define MPI2_IOUNITPAGE5_PAGEVERSION (0x00) + +/*defines for IO Unit Page 5 DmaEngineCapabilities field */ +#define MPI2_IOUNITPAGE5_DMA_CAP_MASK_MAX_REQUESTS (0xFFFF0000) +#define MPI2_IOUNITPAGE5_DMA_CAP_SHIFT_MAX_REQUESTS (16) + +#define MPI2_IOUNITPAGE5_DMA_CAP_EEDP (0x0008) +#define MPI2_IOUNITPAGE5_DMA_CAP_PARITY_GENERATION (0x0004) +#define MPI2_IOUNITPAGE5_DMA_CAP_HASHING (0x0002) +#define MPI2_IOUNITPAGE5_DMA_CAP_ENCRYPTION (0x0001) + + +/*IO Unit Page 6 */ + +typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_6 { + MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */ + U16 Flags; /*0x04 */ + U8 RAHostControlSize; /*0x06 */ + U8 Reserved0; /*0x07 */ + U64 + RaidAcceleratorHostControlBaseAddress; /*0x08 */ + U32 Reserved1; /*0x10 */ + U32 Reserved2; /*0x14 */ + U32 Reserved3; /*0x18 */ +} MPI2_CONFIG_PAGE_IO_UNIT_6, + *PTR_MPI2_CONFIG_PAGE_IO_UNIT_6, + Mpi2IOUnitPage6_t, *pMpi2IOUnitPage6_t; + +#define MPI2_IOUNITPAGE6_PAGEVERSION (0x00) + +/*defines for IO Unit Page 6 Flags field */ +#define MPI2_IOUNITPAGE6_FLAGS_ENABLE_RAID_ACCELERATOR (0x0001) + + +/*IO Unit Page 7 */ + +typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_7 { + MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */ + U8 CurrentPowerMode; /*0x04 */ + U8 PreviousPowerMode; /*0x05 */ + U8 PCIeWidth; /*0x06 */ + U8 PCIeSpeed; /*0x07 */ + U32 ProcessorState; /*0x08 */ + U32 + PowerManagementCapabilities; /*0x0C */ + U16 IOCTemperature; /*0x10 */ + U8 + IOCTemperatureUnits; /*0x12 */ + U8 IOCSpeed; /*0x13 */ + U16 BoardTemperature; /*0x14 */ + U8 + BoardTemperatureUnits; /*0x16 */ + U8 Reserved3; /*0x17 */ + U32 BoardPowerRequirement; /*0x18 */ + U32 PCISlotPowerAllocation; /*0x1C */ +/* reserved prior to MPI v2.6 */ + U8 Flags; /* 0x20 */ + U8 Reserved6; /* 0x21 */ + U16 Reserved7; /* 0x22 */ + U32 Reserved8; /* 0x24 */ +} MPI2_CONFIG_PAGE_IO_UNIT_7, + *PTR_MPI2_CONFIG_PAGE_IO_UNIT_7, + Mpi2IOUnitPage7_t, *pMpi2IOUnitPage7_t; + +#define MPI2_IOUNITPAGE7_PAGEVERSION (0x05) + +/*defines for IO Unit Page 7 CurrentPowerMode and PreviousPowerMode fields */ +#define MPI25_IOUNITPAGE7_PM_INIT_MASK (0xC0) +#define MPI25_IOUNITPAGE7_PM_INIT_UNAVAILABLE (0x00) +#define MPI25_IOUNITPAGE7_PM_INIT_HOST (0x40) +#define MPI25_IOUNITPAGE7_PM_INIT_IO_UNIT (0x80) +#define MPI25_IOUNITPAGE7_PM_INIT_PCIE_DPA (0xC0) + +#define MPI25_IOUNITPAGE7_PM_MODE_MASK (0x07) +#define MPI25_IOUNITPAGE7_PM_MODE_UNAVAILABLE (0x00) +#define MPI25_IOUNITPAGE7_PM_MODE_UNKNOWN (0x01) +#define MPI25_IOUNITPAGE7_PM_MODE_FULL_POWER (0x04) +#define MPI25_IOUNITPAGE7_PM_MODE_REDUCED_POWER (0x05) +#define MPI25_IOUNITPAGE7_PM_MODE_STANDBY (0x06) + + +/*defines for IO Unit Page 7 PCIeWidth field */ +#define MPI2_IOUNITPAGE7_PCIE_WIDTH_X1 (0x01) +#define MPI2_IOUNITPAGE7_PCIE_WIDTH_X2 (0x02) +#define MPI2_IOUNITPAGE7_PCIE_WIDTH_X4 (0x04) +#define MPI2_IOUNITPAGE7_PCIE_WIDTH_X8 (0x08) +#define MPI2_IOUNITPAGE7_PCIE_WIDTH_X16 (0x10) + +/*defines for IO Unit Page 7 PCIeSpeed field */ +#define MPI2_IOUNITPAGE7_PCIE_SPEED_2_5_GBPS (0x00) +#define MPI2_IOUNITPAGE7_PCIE_SPEED_5_0_GBPS (0x01) +#define MPI2_IOUNITPAGE7_PCIE_SPEED_8_0_GBPS (0x02) +#define MPI2_IOUNITPAGE7_PCIE_SPEED_16_0_GBPS (0x03) + +/*defines for IO Unit Page 7 ProcessorState field */ +#define MPI2_IOUNITPAGE7_PSTATE_MASK_SECOND (0x0000000F) +#define MPI2_IOUNITPAGE7_PSTATE_SHIFT_SECOND (0) + +#define MPI2_IOUNITPAGE7_PSTATE_NOT_PRESENT (0x00) +#define MPI2_IOUNITPAGE7_PSTATE_DISABLED (0x01) +#define MPI2_IOUNITPAGE7_PSTATE_ENABLED (0x02) + +/*defines for IO Unit Page 7 PowerManagementCapabilities field */ +#define MPI25_IOUNITPAGE7_PMCAP_DPA_FULL_PWR_MODE (0x00400000) +#define MPI25_IOUNITPAGE7_PMCAP_DPA_REDUCED_PWR_MODE (0x00200000) +#define MPI25_IOUNITPAGE7_PMCAP_DPA_STANDBY_MODE (0x00100000) +#define MPI25_IOUNITPAGE7_PMCAP_HOST_FULL_PWR_MODE (0x00040000) +#define MPI25_IOUNITPAGE7_PMCAP_HOST_REDUCED_PWR_MODE (0x00020000) +#define MPI25_IOUNITPAGE7_PMCAP_HOST_STANDBY_MODE (0x00010000) +#define MPI25_IOUNITPAGE7_PMCAP_IO_FULL_PWR_MODE (0x00004000) +#define MPI25_IOUNITPAGE7_PMCAP_IO_REDUCED_PWR_MODE (0x00002000) +#define MPI25_IOUNITPAGE7_PMCAP_IO_STANDBY_MODE (0x00001000) +#define MPI2_IOUNITPAGE7_PMCAP_HOST_12_5_PCT_IOCSPEED (0x00000400) +#define MPI2_IOUNITPAGE7_PMCAP_HOST_25_0_PCT_IOCSPEED (0x00000200) +#define MPI2_IOUNITPAGE7_PMCAP_HOST_50_0_PCT_IOCSPEED (0x00000100) +#define MPI25_IOUNITPAGE7_PMCAP_IO_12_5_PCT_IOCSPEED (0x00000040) +#define MPI25_IOUNITPAGE7_PMCAP_IO_25_0_PCT_IOCSPEED (0x00000020) +#define MPI25_IOUNITPAGE7_PMCAP_IO_50_0_PCT_IOCSPEED (0x00000010) +#define MPI2_IOUNITPAGE7_PMCAP_HOST_WIDTH_CHANGE_PCIE (0x00000008) +#define MPI2_IOUNITPAGE7_PMCAP_HOST_SPEED_CHANGE_PCIE (0x00000004) +#define MPI25_IOUNITPAGE7_PMCAP_IO_WIDTH_CHANGE_PCIE (0x00000002) +#define MPI25_IOUNITPAGE7_PMCAP_IO_SPEED_CHANGE_PCIE (0x00000001) + +/*obsolete names for the PowerManagementCapabilities bits (above) */ +#define MPI2_IOUNITPAGE7_PMCAP_12_5_PCT_IOCSPEED (0x00000400) +#define MPI2_IOUNITPAGE7_PMCAP_25_0_PCT_IOCSPEED (0x00000200) +#define MPI2_IOUNITPAGE7_PMCAP_50_0_PCT_IOCSPEED (0x00000100) +#define MPI2_IOUNITPAGE7_PMCAP_PCIE_WIDTH_CHANGE (0x00000008) /*obsolete */ +#define MPI2_IOUNITPAGE7_PMCAP_PCIE_SPEED_CHANGE (0x00000004) /*obsolete */ + + +/*defines for IO Unit Page 7 IOCTemperatureUnits field */ +#define MPI2_IOUNITPAGE7_IOC_TEMP_NOT_PRESENT (0x00) +#define MPI2_IOUNITPAGE7_IOC_TEMP_FAHRENHEIT (0x01) +#define MPI2_IOUNITPAGE7_IOC_TEMP_CELSIUS (0x02) + +/*defines for IO Unit Page 7 IOCSpeed field */ +#define MPI2_IOUNITPAGE7_IOC_SPEED_FULL (0x01) +#define MPI2_IOUNITPAGE7_IOC_SPEED_HALF (0x02) +#define MPI2_IOUNITPAGE7_IOC_SPEED_QUARTER (0x04) +#define MPI2_IOUNITPAGE7_IOC_SPEED_EIGHTH (0x08) + +/*defines for IO Unit Page 7 BoardTemperatureUnits field */ +#define MPI2_IOUNITPAGE7_BOARD_TEMP_NOT_PRESENT (0x00) +#define MPI2_IOUNITPAGE7_BOARD_TEMP_FAHRENHEIT (0x01) +#define MPI2_IOUNITPAGE7_BOARD_TEMP_CELSIUS (0x02) + +/* defines for IO Unit Page 7 Flags field */ +#define MPI2_IOUNITPAGE7_FLAG_CABLE_POWER_EXC (0x01) + +/*IO Unit Page 8 */ + +#define MPI2_IOUNIT8_NUM_THRESHOLDS (4) + +typedef struct _MPI2_IOUNIT8_SENSOR { + U16 Flags; /*0x00 */ + U16 Reserved1; /*0x02 */ + U16 + Threshold[MPI2_IOUNIT8_NUM_THRESHOLDS]; /*0x04 */ + U32 Reserved2; /*0x0C */ + U32 Reserved3; /*0x10 */ + U32 Reserved4; /*0x14 */ +} MPI2_IOUNIT8_SENSOR, *PTR_MPI2_IOUNIT8_SENSOR, + Mpi2IOUnit8Sensor_t, *pMpi2IOUnit8Sensor_t; + +/*defines for IO Unit Page 8 Sensor Flags field */ +#define MPI2_IOUNIT8_SENSOR_FLAGS_T3_ENABLE (0x0008) +#define MPI2_IOUNIT8_SENSOR_FLAGS_T2_ENABLE (0x0004) +#define MPI2_IOUNIT8_SENSOR_FLAGS_T1_ENABLE (0x0002) +#define MPI2_IOUNIT8_SENSOR_FLAGS_T0_ENABLE (0x0001) + +/* + *Host code (drivers, BIOS, utilities, etc.) should leave this define set to + *one and check the value returned for NumSensors at runtime. + */ +#ifndef MPI2_IOUNITPAGE8_SENSOR_ENTRIES +#define MPI2_IOUNITPAGE8_SENSOR_ENTRIES (1) +#endif + +typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_8 { + MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */ + U32 Reserved1; /*0x04 */ + U32 Reserved2; /*0x08 */ + U8 NumSensors; /*0x0C */ + U8 PollingInterval; /*0x0D */ + U16 Reserved3; /*0x0E */ + MPI2_IOUNIT8_SENSOR + Sensor[MPI2_IOUNITPAGE8_SENSOR_ENTRIES];/*0x10 */ +} MPI2_CONFIG_PAGE_IO_UNIT_8, + *PTR_MPI2_CONFIG_PAGE_IO_UNIT_8, + Mpi2IOUnitPage8_t, *pMpi2IOUnitPage8_t; + +#define MPI2_IOUNITPAGE8_PAGEVERSION (0x00) + + +/*IO Unit Page 9 */ + +typedef struct _MPI2_IOUNIT9_SENSOR { + U16 CurrentTemperature; /*0x00 */ + U16 Reserved1; /*0x02 */ + U8 Flags; /*0x04 */ + U8 Reserved2; /*0x05 */ + U16 Reserved3; /*0x06 */ + U32 Reserved4; /*0x08 */ + U32 Reserved5; /*0x0C */ +} MPI2_IOUNIT9_SENSOR, *PTR_MPI2_IOUNIT9_SENSOR, + Mpi2IOUnit9Sensor_t, *pMpi2IOUnit9Sensor_t; + +/*defines for IO Unit Page 9 Sensor Flags field */ +#define MPI2_IOUNIT9_SENSOR_FLAGS_TEMP_VALID (0x01) + +/* + *Host code (drivers, BIOS, utilities, etc.) should leave this define set to + *one and check the value returned for NumSensors at runtime. + */ +#ifndef MPI2_IOUNITPAGE9_SENSOR_ENTRIES +#define MPI2_IOUNITPAGE9_SENSOR_ENTRIES (1) +#endif + +typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_9 { + MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */ + U32 Reserved1; /*0x04 */ + U32 Reserved2; /*0x08 */ + U8 NumSensors; /*0x0C */ + U8 Reserved4; /*0x0D */ + U16 Reserved3; /*0x0E */ + MPI2_IOUNIT9_SENSOR + Sensor[MPI2_IOUNITPAGE9_SENSOR_ENTRIES];/*0x10 */ +} MPI2_CONFIG_PAGE_IO_UNIT_9, + *PTR_MPI2_CONFIG_PAGE_IO_UNIT_9, + Mpi2IOUnitPage9_t, *pMpi2IOUnitPage9_t; + +#define MPI2_IOUNITPAGE9_PAGEVERSION (0x00) + + +/*IO Unit Page 10 */ + +typedef struct _MPI2_IOUNIT10_FUNCTION { + U8 CreditPercent; /*0x00 */ + U8 Reserved1; /*0x01 */ + U16 Reserved2; /*0x02 */ +} MPI2_IOUNIT10_FUNCTION, + *PTR_MPI2_IOUNIT10_FUNCTION, + Mpi2IOUnit10Function_t, + *pMpi2IOUnit10Function_t; + +/* + *Host code (drivers, BIOS, utilities, etc.) should leave this define set to + *one and check the value returned for NumFunctions at runtime. + */ +#ifndef MPI2_IOUNITPAGE10_FUNCTION_ENTRIES +#define MPI2_IOUNITPAGE10_FUNCTION_ENTRIES (1) +#endif + +typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_10 { + MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */ + U8 NumFunctions; /*0x04 */ + U8 Reserved1; /*0x05 */ + U16 Reserved2; /*0x06 */ + U32 Reserved3; /*0x08 */ + U32 Reserved4; /*0x0C */ + MPI2_IOUNIT10_FUNCTION + Function[MPI2_IOUNITPAGE10_FUNCTION_ENTRIES];/*0x10 */ +} MPI2_CONFIG_PAGE_IO_UNIT_10, + *PTR_MPI2_CONFIG_PAGE_IO_UNIT_10, + Mpi2IOUnitPage10_t, *pMpi2IOUnitPage10_t; + +#define MPI2_IOUNITPAGE10_PAGEVERSION (0x01) + + +/* IO Unit Page 11 (for MPI v2.6 and later) */ + +typedef struct _MPI26_IOUNIT11_SPINUP_GROUP { + U8 MaxTargetSpinup; /* 0x00 */ + U8 SpinupDelay; /* 0x01 */ + U8 SpinupFlags; /* 0x02 */ + U8 Reserved1; /* 0x03 */ +} MPI26_IOUNIT11_SPINUP_GROUP, + *PTR_MPI26_IOUNIT11_SPINUP_GROUP, + Mpi26IOUnit11SpinupGroup_t, + *pMpi26IOUnit11SpinupGroup_t; + +/* defines for IO Unit Page 11 SpinupFlags */ +#define MPI26_IOUNITPAGE11_SPINUP_DISABLE_FLAG (0x01) + + +/* + * Host code (drivers, BIOS, utilities, etc.) should leave this define set to + * four and check the value returned for NumPhys at runtime. + */ +#ifndef MPI26_IOUNITPAGE11_PHY_MAX +#define MPI26_IOUNITPAGE11_PHY_MAX (4) +#endif + +typedef struct _MPI26_CONFIG_PAGE_IO_UNIT_11 { + MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */ + U32 Reserved1; /*0x04 */ + MPI26_IOUNIT11_SPINUP_GROUP SpinupGroupParameters[4]; /*0x08 */ + U32 Reserved2; /*0x18 */ + U32 Reserved3; /*0x1C */ + U32 Reserved4; /*0x20 */ + U8 BootDeviceWaitTime; /*0x24 */ + U8 Reserved5; /*0x25 */ + U16 Reserved6; /*0x26 */ + U8 NumPhys; /*0x28 */ + U8 PEInitialSpinupDelay; /*0x29 */ + U8 PEReplyDelay; /*0x2A */ + U8 Flags; /*0x2B */ + U8 PHY[MPI26_IOUNITPAGE11_PHY_MAX];/*0x2C */ +} MPI26_CONFIG_PAGE_IO_UNIT_11, + *PTR_MPI26_CONFIG_PAGE_IO_UNIT_11, + Mpi26IOUnitPage11_t, + *pMpi26IOUnitPage11_t; + +#define MPI26_IOUNITPAGE11_PAGEVERSION (0x00) + +/* defines for Flags field */ +#define MPI26_IOUNITPAGE11_FLAGS_AUTO_PORTENABLE (0x01) + +/* defines for PHY field */ +#define MPI26_IOUNITPAGE11_PHY_SPINUP_GROUP_MASK (0x03) + + + + + + +/**************************************************************************** +* IOC Config Pages +****************************************************************************/ + +/*IOC Page 0 */ + +typedef struct _MPI2_CONFIG_PAGE_IOC_0 { + MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */ + U32 Reserved1; /*0x04 */ + U32 Reserved2; /*0x08 */ + U16 VendorID; /*0x0C */ + U16 DeviceID; /*0x0E */ + U8 RevisionID; /*0x10 */ + U8 Reserved3; /*0x11 */ + U16 Reserved4; /*0x12 */ + U32 ClassCode; /*0x14 */ + U16 SubsystemVendorID; /*0x18 */ + U16 SubsystemID; /*0x1A */ +} MPI2_CONFIG_PAGE_IOC_0, + *PTR_MPI2_CONFIG_PAGE_IOC_0, + Mpi2IOCPage0_t, *pMpi2IOCPage0_t; + +#define MPI2_IOCPAGE0_PAGEVERSION (0x02) + + +/*IOC Page 1 */ + +typedef struct _MPI2_CONFIG_PAGE_IOC_1 { + MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */ + U32 Flags; /*0x04 */ + U32 CoalescingTimeout; /*0x08 */ + U8 CoalescingDepth; /*0x0C */ + U8 PCISlotNum; /*0x0D */ + U8 PCIBusNum; /*0x0E */ + U8 PCIDomainSegment; /*0x0F */ + U32 Reserved1; /*0x10 */ + U32 Reserved2; /*0x14 */ +} MPI2_CONFIG_PAGE_IOC_1, + *PTR_MPI2_CONFIG_PAGE_IOC_1, + Mpi2IOCPage1_t, *pMpi2IOCPage1_t; + +#define MPI2_IOCPAGE1_PAGEVERSION (0x05) + +/*defines for IOC Page 1 Flags field */ +#define MPI2_IOCPAGE1_REPLY_COALESCING (0x00000001) + +#define MPI2_IOCPAGE1_PCISLOTNUM_UNKNOWN (0xFF) +#define MPI2_IOCPAGE1_PCIBUSNUM_UNKNOWN (0xFF) +#define MPI2_IOCPAGE1_PCIDOMAIN_UNKNOWN (0xFF) + +/*IOC Page 6 */ + +typedef struct _MPI2_CONFIG_PAGE_IOC_6 { + MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */ + U32 + CapabilitiesFlags; /*0x04 */ + U8 MaxDrivesRAID0; /*0x08 */ + U8 MaxDrivesRAID1; /*0x09 */ + U8 + MaxDrivesRAID1E; /*0x0A */ + U8 + MaxDrivesRAID10; /*0x0B */ + U8 MinDrivesRAID0; /*0x0C */ + U8 MinDrivesRAID1; /*0x0D */ + U8 + MinDrivesRAID1E; /*0x0E */ + U8 + MinDrivesRAID10; /*0x0F */ + U32 Reserved1; /*0x10 */ + U8 + MaxGlobalHotSpares; /*0x14 */ + U8 MaxPhysDisks; /*0x15 */ + U8 MaxVolumes; /*0x16 */ + U8 MaxConfigs; /*0x17 */ + U8 MaxOCEDisks; /*0x18 */ + U8 Reserved2; /*0x19 */ + U16 Reserved3; /*0x1A */ + U32 + SupportedStripeSizeMapRAID0; /*0x1C */ + U32 + SupportedStripeSizeMapRAID1E; /*0x20 */ + U32 + SupportedStripeSizeMapRAID10; /*0x24 */ + U32 Reserved4; /*0x28 */ + U32 Reserved5; /*0x2C */ + U16 + DefaultMetadataSize; /*0x30 */ + U16 Reserved6; /*0x32 */ + U16 + MaxBadBlockTableEntries; /*0x34 */ + U16 Reserved7; /*0x36 */ + U32 + IRNvsramVersion; /*0x38 */ +} MPI2_CONFIG_PAGE_IOC_6, + *PTR_MPI2_CONFIG_PAGE_IOC_6, + Mpi2IOCPage6_t, *pMpi2IOCPage6_t; + +#define MPI2_IOCPAGE6_PAGEVERSION (0x05) + +/*defines for IOC Page 6 CapabilitiesFlags */ +#define MPI2_IOCPAGE6_CAP_FLAGS_4K_SECTORS_SUPPORT (0x00000020) +#define MPI2_IOCPAGE6_CAP_FLAGS_RAID10_SUPPORT (0x00000010) +#define MPI2_IOCPAGE6_CAP_FLAGS_RAID1_SUPPORT (0x00000008) +#define MPI2_IOCPAGE6_CAP_FLAGS_RAID1E_SUPPORT (0x00000004) +#define MPI2_IOCPAGE6_CAP_FLAGS_RAID0_SUPPORT (0x00000002) +#define MPI2_IOCPAGE6_CAP_FLAGS_GLOBAL_HOT_SPARE (0x00000001) + + +/*IOC Page 7 */ + +#define MPI2_IOCPAGE7_EVENTMASK_WORDS (4) + +typedef struct _MPI2_CONFIG_PAGE_IOC_7 { + MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */ + U32 Reserved1; /*0x04 */ + U32 + EventMasks[MPI2_IOCPAGE7_EVENTMASK_WORDS];/*0x08 */ + U16 SASBroadcastPrimitiveMasks; /*0x18 */ + U16 SASNotifyPrimitiveMasks; /*0x1A */ + U32 Reserved3; /*0x1C */ +} MPI2_CONFIG_PAGE_IOC_7, + *PTR_MPI2_CONFIG_PAGE_IOC_7, + Mpi2IOCPage7_t, *pMpi2IOCPage7_t; + +#define MPI2_IOCPAGE7_PAGEVERSION (0x02) + + +/*IOC Page 8 */ + +typedef struct _MPI2_CONFIG_PAGE_IOC_8 { + MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */ + U8 NumDevsPerEnclosure; /*0x04 */ + U8 Reserved1; /*0x05 */ + U16 Reserved2; /*0x06 */ + U16 MaxPersistentEntries; /*0x08 */ + U16 MaxNumPhysicalMappedIDs; /*0x0A */ + U16 Flags; /*0x0C */ + U16 Reserved3; /*0x0E */ + U16 IRVolumeMappingFlags; /*0x10 */ + U16 Reserved4; /*0x12 */ + U32 Reserved5; /*0x14 */ +} MPI2_CONFIG_PAGE_IOC_8, + *PTR_MPI2_CONFIG_PAGE_IOC_8, + Mpi2IOCPage8_t, *pMpi2IOCPage8_t; + +#define MPI2_IOCPAGE8_PAGEVERSION (0x00) + +/*defines for IOC Page 8 Flags field */ +#define MPI2_IOCPAGE8_FLAGS_DA_START_SLOT_1 (0x00000020) +#define MPI2_IOCPAGE8_FLAGS_RESERVED_TARGETID_0 (0x00000010) + +#define MPI2_IOCPAGE8_FLAGS_MASK_MAPPING_MODE (0x0000000E) +#define MPI2_IOCPAGE8_FLAGS_DEVICE_PERSISTENCE_MAPPING (0x00000000) +#define MPI2_IOCPAGE8_FLAGS_ENCLOSURE_SLOT_MAPPING (0x00000002) + +#define MPI2_IOCPAGE8_FLAGS_DISABLE_PERSISTENT_MAPPING (0x00000001) +#define MPI2_IOCPAGE8_FLAGS_ENABLE_PERSISTENT_MAPPING (0x00000000) + +/*defines for IOC Page 8 IRVolumeMappingFlags */ +#define MPI2_IOCPAGE8_IRFLAGS_MASK_VOLUME_MAPPING_MODE (0x00000003) +#define MPI2_IOCPAGE8_IRFLAGS_LOW_VOLUME_MAPPING (0x00000000) +#define MPI2_IOCPAGE8_IRFLAGS_HIGH_VOLUME_MAPPING (0x00000001) + + +/**************************************************************************** +* BIOS Config Pages +****************************************************************************/ + +/*BIOS Page 1 */ + +typedef struct _MPI2_CONFIG_PAGE_BIOS_1 { + MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */ + U32 BiosOptions; /*0x04 */ + U32 IOCSettings; /*0x08 */ + U8 SSUTimeout; /*0x0C */ + U8 Reserved1; /*0x0D */ + U16 Reserved2; /*0x0E */ + U32 DeviceSettings; /*0x10 */ + U16 NumberOfDevices; /*0x14 */ + U16 UEFIVersion; /*0x16 */ + U16 IOTimeoutBlockDevicesNonRM; /*0x18 */ + U16 IOTimeoutSequential; /*0x1A */ + U16 IOTimeoutOther; /*0x1C */ + U16 IOTimeoutBlockDevicesRM; /*0x1E */ +} MPI2_CONFIG_PAGE_BIOS_1, + *PTR_MPI2_CONFIG_PAGE_BIOS_1, + Mpi2BiosPage1_t, *pMpi2BiosPage1_t; + +#define MPI2_BIOSPAGE1_PAGEVERSION (0x07) + +/*values for BIOS Page 1 BiosOptions field */ +#define MPI2_BIOSPAGE1_OPTIONS_BOOT_LIST_ADD_ALT_BOOT_DEVICE (0x00008000) +#define MPI2_BIOSPAGE1_OPTIONS_ADVANCED_CONFIG (0x00004000) + +#define MPI2_BIOSPAGE1_OPTIONS_PNS_MASK (0x00003800) +#define MPI2_BIOSPAGE1_OPTIONS_PNS_MASK (0x00003800) +#define MPI2_BIOSPAGE1_OPTIONS_PNS_PBDHL (0x00000000) +#define MPI2_BIOSPAGE1_OPTIONS_PNS_ENCSLOSURE (0x00000800) +#define MPI2_BIOSPAGE1_OPTIONS_PNS_LWWID (0x00001000) +#define MPI2_BIOSPAGE1_OPTIONS_PNS_PSENS (0x00001800) +#define MPI2_BIOSPAGE1_OPTIONS_PNS_ESPHY (0x00002000) + +#define MPI2_BIOSPAGE1_OPTIONS_X86_DISABLE_BIOS (0x00000400) + +#define MPI2_BIOSPAGE1_OPTIONS_MASK_REGISTRATION_UEFI_BSD (0x00000300) +#define MPI2_BIOSPAGE1_OPTIONS_USE_BIT0_REGISTRATION_UEFI_BSD (0x00000000) +#define MPI2_BIOSPAGE1_OPTIONS_FULL_REGISTRATION_UEFI_BSD (0x00000100) +#define MPI2_BIOSPAGE1_OPTIONS_ADAPTER_REGISTRATION_UEFI_BSD (0x00000200) +#define MPI2_BIOSPAGE1_OPTIONS_DISABLE_REGISTRATION_UEFI_BSD (0x00000300) + +#define MPI2_BIOSPAGE1_OPTIONS_MASK_OEM_ID (0x000000F0) +#define MPI2_BIOSPAGE1_OPTIONS_LSI_OEM_ID (0x00000000) + +#define MPI2_BIOSPAGE1_OPTIONS_MASK_UEFI_HII_REGISTRATION (0x00000006) +#define MPI2_BIOSPAGE1_OPTIONS_ENABLE_UEFI_HII (0x00000000) +#define MPI2_BIOSPAGE1_OPTIONS_DISABLE_UEFI_HII (0x00000002) +#define MPI2_BIOSPAGE1_OPTIONS_VERSION_CHECK_UEFI_HII (0x00000004) + +#define MPI2_BIOSPAGE1_OPTIONS_DISABLE_BIOS (0x00000001) + +/*values for BIOS Page 1 IOCSettings field */ +#define MPI2_BIOSPAGE1_IOCSET_MASK_BOOT_PREFERENCE (0x00030000) +#define MPI2_BIOSPAGE1_IOCSET_ENCLOSURE_SLOT_BOOT (0x00000000) +#define MPI2_BIOSPAGE1_IOCSET_SAS_ADDRESS_BOOT (0x00010000) + +#define MPI2_BIOSPAGE1_IOCSET_MASK_RM_SETTING (0x000000C0) +#define MPI2_BIOSPAGE1_IOCSET_NONE_RM_SETTING (0x00000000) +#define MPI2_BIOSPAGE1_IOCSET_BOOT_RM_SETTING (0x00000040) +#define MPI2_BIOSPAGE1_IOCSET_MEDIA_RM_SETTING (0x00000080) + +#define MPI2_BIOSPAGE1_IOCSET_MASK_ADAPTER_SUPPORT (0x00000030) +#define MPI2_BIOSPAGE1_IOCSET_NO_SUPPORT (0x00000000) +#define MPI2_BIOSPAGE1_IOCSET_BIOS_SUPPORT (0x00000010) +#define MPI2_BIOSPAGE1_IOCSET_OS_SUPPORT (0x00000020) +#define MPI2_BIOSPAGE1_IOCSET_ALL_SUPPORT (0x00000030) + +#define MPI2_BIOSPAGE1_IOCSET_ALTERNATE_CHS (0x00000008) + +/*values for BIOS Page 1 DeviceSettings field */ +#define MPI2_BIOSPAGE1_DEVSET_DISABLE_SMART_POLLING (0x00000010) +#define MPI2_BIOSPAGE1_DEVSET_DISABLE_SEQ_LUN (0x00000008) +#define MPI2_BIOSPAGE1_DEVSET_DISABLE_RM_LUN (0x00000004) +#define MPI2_BIOSPAGE1_DEVSET_DISABLE_NON_RM_LUN (0x00000002) +#define MPI2_BIOSPAGE1_DEVSET_DISABLE_OTHER_LUN (0x00000001) + +/*defines for BIOS Page 1 UEFIVersion field */ +#define MPI2_BIOSPAGE1_UEFI_VER_MAJOR_MASK (0xFF00) +#define MPI2_BIOSPAGE1_UEFI_VER_MAJOR_SHIFT (8) +#define MPI2_BIOSPAGE1_UEFI_VER_MINOR_MASK (0x00FF) +#define MPI2_BIOSPAGE1_UEFI_VER_MINOR_SHIFT (0) + + + +/*BIOS Page 2 */ + +typedef struct _MPI2_BOOT_DEVICE_ADAPTER_ORDER { + U32 Reserved1; /*0x00 */ + U32 Reserved2; /*0x04 */ + U32 Reserved3; /*0x08 */ + U32 Reserved4; /*0x0C */ + U32 Reserved5; /*0x10 */ + U32 Reserved6; /*0x14 */ +} MPI2_BOOT_DEVICE_ADAPTER_ORDER, + *PTR_MPI2_BOOT_DEVICE_ADAPTER_ORDER, + Mpi2BootDeviceAdapterOrder_t, + *pMpi2BootDeviceAdapterOrder_t; + +typedef struct _MPI2_BOOT_DEVICE_SAS_WWID { + U64 SASAddress; /*0x00 */ + U8 LUN[8]; /*0x08 */ + U32 Reserved1; /*0x10 */ + U32 Reserved2; /*0x14 */ +} MPI2_BOOT_DEVICE_SAS_WWID, + *PTR_MPI2_BOOT_DEVICE_SAS_WWID, + Mpi2BootDeviceSasWwid_t, + *pMpi2BootDeviceSasWwid_t; + +typedef struct _MPI2_BOOT_DEVICE_ENCLOSURE_SLOT { + U64 EnclosureLogicalID; /*0x00 */ + U32 Reserved1; /*0x08 */ + U32 Reserved2; /*0x0C */ + U16 SlotNumber; /*0x10 */ + U16 Reserved3; /*0x12 */ + U32 Reserved4; /*0x14 */ +} MPI2_BOOT_DEVICE_ENCLOSURE_SLOT, + *PTR_MPI2_BOOT_DEVICE_ENCLOSURE_SLOT, + Mpi2BootDeviceEnclosureSlot_t, + *pMpi2BootDeviceEnclosureSlot_t; + +typedef struct _MPI2_BOOT_DEVICE_DEVICE_NAME { + U64 DeviceName; /*0x00 */ + U8 LUN[8]; /*0x08 */ + U32 Reserved1; /*0x10 */ + U32 Reserved2; /*0x14 */ +} MPI2_BOOT_DEVICE_DEVICE_NAME, + *PTR_MPI2_BOOT_DEVICE_DEVICE_NAME, + Mpi2BootDeviceDeviceName_t, + *pMpi2BootDeviceDeviceName_t; + +typedef union _MPI2_MPI2_BIOSPAGE2_BOOT_DEVICE { + MPI2_BOOT_DEVICE_ADAPTER_ORDER AdapterOrder; + MPI2_BOOT_DEVICE_SAS_WWID SasWwid; + MPI2_BOOT_DEVICE_ENCLOSURE_SLOT EnclosureSlot; + MPI2_BOOT_DEVICE_DEVICE_NAME DeviceName; +} MPI2_BIOSPAGE2_BOOT_DEVICE, + *PTR_MPI2_BIOSPAGE2_BOOT_DEVICE, + Mpi2BiosPage2BootDevice_t, + *pMpi2BiosPage2BootDevice_t; + +typedef struct _MPI2_CONFIG_PAGE_BIOS_2 { + MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */ + U32 Reserved1; /*0x04 */ + U32 Reserved2; /*0x08 */ + U32 Reserved3; /*0x0C */ + U32 Reserved4; /*0x10 */ + U32 Reserved5; /*0x14 */ + U32 Reserved6; /*0x18 */ + U8 ReqBootDeviceForm; /*0x1C */ + U8 Reserved7; /*0x1D */ + U16 Reserved8; /*0x1E */ + MPI2_BIOSPAGE2_BOOT_DEVICE RequestedBootDevice; /*0x20 */ + U8 ReqAltBootDeviceForm; /*0x38 */ + U8 Reserved9; /*0x39 */ + U16 Reserved10; /*0x3A */ + MPI2_BIOSPAGE2_BOOT_DEVICE RequestedAltBootDevice; /*0x3C */ + U8 CurrentBootDeviceForm; /*0x58 */ + U8 Reserved11; /*0x59 */ + U16 Reserved12; /*0x5A */ + MPI2_BIOSPAGE2_BOOT_DEVICE CurrentBootDevice; /*0x58 */ +} MPI2_CONFIG_PAGE_BIOS_2, *PTR_MPI2_CONFIG_PAGE_BIOS_2, + Mpi2BiosPage2_t, *pMpi2BiosPage2_t; + +#define MPI2_BIOSPAGE2_PAGEVERSION (0x04) + +/*values for BIOS Page 2 BootDeviceForm fields */ +#define MPI2_BIOSPAGE2_FORM_MASK (0x0F) +#define MPI2_BIOSPAGE2_FORM_NO_DEVICE_SPECIFIED (0x00) +#define MPI2_BIOSPAGE2_FORM_SAS_WWID (0x05) +#define MPI2_BIOSPAGE2_FORM_ENCLOSURE_SLOT (0x06) +#define MPI2_BIOSPAGE2_FORM_DEVICE_NAME (0x07) + + +/*BIOS Page 3 */ + +#define MPI2_BIOSPAGE3_NUM_ADAPTER (4) + +typedef struct _MPI2_ADAPTER_INFO { + U8 PciBusNumber; /*0x00 */ + U8 PciDeviceAndFunctionNumber; /*0x01 */ + U16 AdapterFlags; /*0x02 */ +} MPI2_ADAPTER_INFO, *PTR_MPI2_ADAPTER_INFO, + Mpi2AdapterInfo_t, *pMpi2AdapterInfo_t; + +#define MPI2_ADAPTER_INFO_FLAGS_EMBEDDED (0x0001) +#define MPI2_ADAPTER_INFO_FLAGS_INIT_STATUS (0x0002) + +typedef struct _MPI2_ADAPTER_ORDER_AUX { + U64 WWID; /* 0x00 */ + U32 Reserved1; /* 0x08 */ + U32 Reserved2; /* 0x0C */ +} MPI2_ADAPTER_ORDER_AUX, *PTR_MPI2_ADAPTER_ORDER_AUX, + Mpi2AdapterOrderAux_t, *pMpi2AdapterOrderAux_t; + + +typedef struct _MPI2_CONFIG_PAGE_BIOS_3 { + MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */ + U32 GlobalFlags; /*0x04 */ + U32 BiosVersion; /*0x08 */ + MPI2_ADAPTER_INFO AdapterOrder[MPI2_BIOSPAGE3_NUM_ADAPTER]; + U32 Reserved1; /*0x1C */ + MPI2_ADAPTER_ORDER_AUX AdapterOrderAux[MPI2_BIOSPAGE3_NUM_ADAPTER]; +} MPI2_CONFIG_PAGE_BIOS_3, + *PTR_MPI2_CONFIG_PAGE_BIOS_3, + Mpi2BiosPage3_t, *pMpi2BiosPage3_t; + +#define MPI2_BIOSPAGE3_PAGEVERSION (0x01) + +/*values for BIOS Page 3 GlobalFlags */ +#define MPI2_BIOSPAGE3_FLAGS_PAUSE_ON_ERROR (0x00000002) +#define MPI2_BIOSPAGE3_FLAGS_VERBOSE_ENABLE (0x00000004) +#define MPI2_BIOSPAGE3_FLAGS_HOOK_INT_40_DISABLE (0x00000010) + +#define MPI2_BIOSPAGE3_FLAGS_DEV_LIST_DISPLAY_MASK (0x000000E0) +#define MPI2_BIOSPAGE3_FLAGS_INSTALLED_DEV_DISPLAY (0x00000000) +#define MPI2_BIOSPAGE3_FLAGS_ADAPTER_DISPLAY (0x00000020) +#define MPI2_BIOSPAGE3_FLAGS_ADAPTER_DEV_DISPLAY (0x00000040) + + +/*BIOS Page 4 */ + +/* + *Host code (drivers, BIOS, utilities, etc.) should leave this define set to + *one and check the value returned for NumPhys at runtime. + */ +#ifndef MPI2_BIOS_PAGE_4_PHY_ENTRIES +#define MPI2_BIOS_PAGE_4_PHY_ENTRIES (1) +#endif + +typedef struct _MPI2_BIOS4_ENTRY { + U64 ReassignmentWWID; /*0x00 */ + U64 ReassignmentDeviceName; /*0x08 */ +} MPI2_BIOS4_ENTRY, *PTR_MPI2_BIOS4_ENTRY, + Mpi2MBios4Entry_t, *pMpi2Bios4Entry_t; + +typedef struct _MPI2_CONFIG_PAGE_BIOS_4 { + MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */ + U8 NumPhys; /*0x04 */ + U8 Reserved1; /*0x05 */ + U16 Reserved2; /*0x06 */ + MPI2_BIOS4_ENTRY + Phy[MPI2_BIOS_PAGE_4_PHY_ENTRIES]; /*0x08 */ +} MPI2_CONFIG_PAGE_BIOS_4, *PTR_MPI2_CONFIG_PAGE_BIOS_4, + Mpi2BiosPage4_t, *pMpi2BiosPage4_t; + +#define MPI2_BIOSPAGE4_PAGEVERSION (0x01) + + +/**************************************************************************** +* RAID Volume Config Pages +****************************************************************************/ + +/*RAID Volume Page 0 */ + +typedef struct _MPI2_RAIDVOL0_PHYS_DISK { + U8 RAIDSetNum; /*0x00 */ + U8 PhysDiskMap; /*0x01 */ + U8 PhysDiskNum; /*0x02 */ + U8 Reserved; /*0x03 */ +} MPI2_RAIDVOL0_PHYS_DISK, *PTR_MPI2_RAIDVOL0_PHYS_DISK, + Mpi2RaidVol0PhysDisk_t, *pMpi2RaidVol0PhysDisk_t; + +/*defines for the PhysDiskMap field */ +#define MPI2_RAIDVOL0_PHYSDISK_PRIMARY (0x01) +#define MPI2_RAIDVOL0_PHYSDISK_SECONDARY (0x02) + +typedef struct _MPI2_RAIDVOL0_SETTINGS { + U16 Settings; /*0x00 */ + U8 HotSparePool; /*0x01 */ + U8 Reserved; /*0x02 */ +} MPI2_RAIDVOL0_SETTINGS, *PTR_MPI2_RAIDVOL0_SETTINGS, + Mpi2RaidVol0Settings_t, + *pMpi2RaidVol0Settings_t; + +/*RAID Volume Page 0 HotSparePool defines, also used in RAID Physical Disk */ +#define MPI2_RAID_HOT_SPARE_POOL_0 (0x01) +#define MPI2_RAID_HOT_SPARE_POOL_1 (0x02) +#define MPI2_RAID_HOT_SPARE_POOL_2 (0x04) +#define MPI2_RAID_HOT_SPARE_POOL_3 (0x08) +#define MPI2_RAID_HOT_SPARE_POOL_4 (0x10) +#define MPI2_RAID_HOT_SPARE_POOL_5 (0x20) +#define MPI2_RAID_HOT_SPARE_POOL_6 (0x40) +#define MPI2_RAID_HOT_SPARE_POOL_7 (0x80) + +/*RAID Volume Page 0 VolumeSettings defines */ +#define MPI2_RAIDVOL0_SETTING_USE_PRODUCT_ID_SUFFIX (0x0008) +#define MPI2_RAIDVOL0_SETTING_AUTO_CONFIG_HSWAP_DISABLE (0x0004) + +#define MPI2_RAIDVOL0_SETTING_MASK_WRITE_CACHING (0x0003) +#define MPI2_RAIDVOL0_SETTING_UNCHANGED (0x0000) +#define MPI2_RAIDVOL0_SETTING_DISABLE_WRITE_CACHING (0x0001) +#define MPI2_RAIDVOL0_SETTING_ENABLE_WRITE_CACHING (0x0002) + +/* + *Host code (drivers, BIOS, utilities, etc.) should leave this define set to + *one and check the value returned for NumPhysDisks at runtime. + */ +#ifndef MPI2_RAID_VOL_PAGE_0_PHYSDISK_MAX +#define MPI2_RAID_VOL_PAGE_0_PHYSDISK_MAX (1) +#endif + +typedef struct _MPI2_CONFIG_PAGE_RAID_VOL_0 { + MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */ + U16 DevHandle; /*0x04 */ + U8 VolumeState; /*0x06 */ + U8 VolumeType; /*0x07 */ + U32 VolumeStatusFlags; /*0x08 */ + MPI2_RAIDVOL0_SETTINGS VolumeSettings; /*0x0C */ + U64 MaxLBA; /*0x10 */ + U32 StripeSize; /*0x18 */ + U16 BlockSize; /*0x1C */ + U16 Reserved1; /*0x1E */ + U8 SupportedPhysDisks;/*0x20 */ + U8 ResyncRate; /*0x21 */ + U16 DataScrubDuration; /*0x22 */ + U8 NumPhysDisks; /*0x24 */ + U8 Reserved2; /*0x25 */ + U8 Reserved3; /*0x26 */ + U8 InactiveStatus; /*0x27 */ + MPI2_RAIDVOL0_PHYS_DISK + PhysDisk[MPI2_RAID_VOL_PAGE_0_PHYSDISK_MAX]; /*0x28 */ +} MPI2_CONFIG_PAGE_RAID_VOL_0, + *PTR_MPI2_CONFIG_PAGE_RAID_VOL_0, + Mpi2RaidVolPage0_t, *pMpi2RaidVolPage0_t; + +#define MPI2_RAIDVOLPAGE0_PAGEVERSION (0x0A) + +/*values for RAID VolumeState */ +#define MPI2_RAID_VOL_STATE_MISSING (0x00) +#define MPI2_RAID_VOL_STATE_FAILED (0x01) +#define MPI2_RAID_VOL_STATE_INITIALIZING (0x02) +#define MPI2_RAID_VOL_STATE_ONLINE (0x03) +#define MPI2_RAID_VOL_STATE_DEGRADED (0x04) +#define MPI2_RAID_VOL_STATE_OPTIMAL (0x05) + +/*values for RAID VolumeType */ +#define MPI2_RAID_VOL_TYPE_RAID0 (0x00) +#define MPI2_RAID_VOL_TYPE_RAID1E (0x01) +#define MPI2_RAID_VOL_TYPE_RAID1 (0x02) +#define MPI2_RAID_VOL_TYPE_RAID10 (0x05) +#define MPI2_RAID_VOL_TYPE_UNKNOWN (0xFF) + +/*values for RAID Volume Page 0 VolumeStatusFlags field */ +#define MPI2_RAIDVOL0_STATUS_FLAG_PENDING_RESYNC (0x02000000) +#define MPI2_RAIDVOL0_STATUS_FLAG_BACKG_INIT_PENDING (0x01000000) +#define MPI2_RAIDVOL0_STATUS_FLAG_MDC_PENDING (0x00800000) +#define MPI2_RAIDVOL0_STATUS_FLAG_USER_CONSIST_PENDING (0x00400000) +#define MPI2_RAIDVOL0_STATUS_FLAG_MAKE_DATA_CONSISTENT (0x00200000) +#define MPI2_RAIDVOL0_STATUS_FLAG_DATA_SCRUB (0x00100000) +#define MPI2_RAIDVOL0_STATUS_FLAG_CONSISTENCY_CHECK (0x00080000) +#define MPI2_RAIDVOL0_STATUS_FLAG_CAPACITY_EXPANSION (0x00040000) +#define MPI2_RAIDVOL0_STATUS_FLAG_BACKGROUND_INIT (0x00020000) +#define MPI2_RAIDVOL0_STATUS_FLAG_RESYNC_IN_PROGRESS (0x00010000) +#define MPI2_RAIDVOL0_STATUS_FLAG_VOL_NOT_CONSISTENT (0x00000080) +#define MPI2_RAIDVOL0_STATUS_FLAG_OCE_ALLOWED (0x00000040) +#define MPI2_RAIDVOL0_STATUS_FLAG_BGI_COMPLETE (0x00000020) +#define MPI2_RAIDVOL0_STATUS_FLAG_1E_OFFSET_MIRROR (0x00000000) +#define MPI2_RAIDVOL0_STATUS_FLAG_1E_ADJACENT_MIRROR (0x00000010) +#define MPI2_RAIDVOL0_STATUS_FLAG_BAD_BLOCK_TABLE_FULL (0x00000008) +#define MPI2_RAIDVOL0_STATUS_FLAG_VOLUME_INACTIVE (0x00000004) +#define MPI2_RAIDVOL0_STATUS_FLAG_QUIESCED (0x00000002) +#define MPI2_RAIDVOL0_STATUS_FLAG_ENABLED (0x00000001) + +/*values for RAID Volume Page 0 SupportedPhysDisks field */ +#define MPI2_RAIDVOL0_SUPPORT_SOLID_STATE_DISKS (0x08) +#define MPI2_RAIDVOL0_SUPPORT_HARD_DISKS (0x04) +#define MPI2_RAIDVOL0_SUPPORT_SAS_PROTOCOL (0x02) +#define MPI2_RAIDVOL0_SUPPORT_SATA_PROTOCOL (0x01) + +/*values for RAID Volume Page 0 InactiveStatus field */ +#define MPI2_RAIDVOLPAGE0_UNKNOWN_INACTIVE (0x00) +#define MPI2_RAIDVOLPAGE0_STALE_METADATA_INACTIVE (0x01) +#define MPI2_RAIDVOLPAGE0_FOREIGN_VOLUME_INACTIVE (0x02) +#define MPI2_RAIDVOLPAGE0_INSUFFICIENT_RESOURCE_INACTIVE (0x03) +#define MPI2_RAIDVOLPAGE0_CLONE_VOLUME_INACTIVE (0x04) +#define MPI2_RAIDVOLPAGE0_INSUFFICIENT_METADATA_INACTIVE (0x05) +#define MPI2_RAIDVOLPAGE0_PREVIOUSLY_DELETED (0x06) + + +/*RAID Volume Page 1 */ + +typedef struct _MPI2_CONFIG_PAGE_RAID_VOL_1 { + MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */ + U16 DevHandle; /*0x04 */ + U16 Reserved0; /*0x06 */ + U8 GUID[24]; /*0x08 */ + U8 Name[16]; /*0x20 */ + U64 WWID; /*0x30 */ + U32 Reserved1; /*0x38 */ + U32 Reserved2; /*0x3C */ +} MPI2_CONFIG_PAGE_RAID_VOL_1, + *PTR_MPI2_CONFIG_PAGE_RAID_VOL_1, + Mpi2RaidVolPage1_t, *pMpi2RaidVolPage1_t; + +#define MPI2_RAIDVOLPAGE1_PAGEVERSION (0x03) + + +/**************************************************************************** +* RAID Physical Disk Config Pages +****************************************************************************/ + +/*RAID Physical Disk Page 0 */ + +typedef struct _MPI2_RAIDPHYSDISK0_SETTINGS { + U16 Reserved1; /*0x00 */ + U8 HotSparePool; /*0x02 */ + U8 Reserved2; /*0x03 */ +} MPI2_RAIDPHYSDISK0_SETTINGS, + *PTR_MPI2_RAIDPHYSDISK0_SETTINGS, + Mpi2RaidPhysDisk0Settings_t, + *pMpi2RaidPhysDisk0Settings_t; + +/*use MPI2_RAID_HOT_SPARE_POOL_ defines for the HotSparePool field */ + +typedef struct _MPI2_RAIDPHYSDISK0_INQUIRY_DATA { + U8 VendorID[8]; /*0x00 */ + U8 ProductID[16]; /*0x08 */ + U8 ProductRevLevel[4]; /*0x18 */ + U8 SerialNum[32]; /*0x1C */ +} MPI2_RAIDPHYSDISK0_INQUIRY_DATA, + *PTR_MPI2_RAIDPHYSDISK0_INQUIRY_DATA, + Mpi2RaidPhysDisk0InquiryData_t, + *pMpi2RaidPhysDisk0InquiryData_t; + +typedef struct _MPI2_CONFIG_PAGE_RD_PDISK_0 { + MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */ + U16 DevHandle; /*0x04 */ + U8 Reserved1; /*0x06 */ + U8 PhysDiskNum; /*0x07 */ + MPI2_RAIDPHYSDISK0_SETTINGS PhysDiskSettings; /*0x08 */ + U32 Reserved2; /*0x0C */ + MPI2_RAIDPHYSDISK0_INQUIRY_DATA InquiryData; /*0x10 */ + U32 Reserved3; /*0x4C */ + U8 PhysDiskState; /*0x50 */ + U8 OfflineReason; /*0x51 */ + U8 IncompatibleReason; /*0x52 */ + U8 PhysDiskAttributes; /*0x53 */ + U32 PhysDiskStatusFlags;/*0x54 */ + U64 DeviceMaxLBA; /*0x58 */ + U64 HostMaxLBA; /*0x60 */ + U64 CoercedMaxLBA; /*0x68 */ + U16 BlockSize; /*0x70 */ + U16 Reserved5; /*0x72 */ + U32 Reserved6; /*0x74 */ +} MPI2_CONFIG_PAGE_RD_PDISK_0, + *PTR_MPI2_CONFIG_PAGE_RD_PDISK_0, + Mpi2RaidPhysDiskPage0_t, + *pMpi2RaidPhysDiskPage0_t; + +#define MPI2_RAIDPHYSDISKPAGE0_PAGEVERSION (0x05) + +/*PhysDiskState defines */ +#define MPI2_RAID_PD_STATE_NOT_CONFIGURED (0x00) +#define MPI2_RAID_PD_STATE_NOT_COMPATIBLE (0x01) +#define MPI2_RAID_PD_STATE_OFFLINE (0x02) +#define MPI2_RAID_PD_STATE_ONLINE (0x03) +#define MPI2_RAID_PD_STATE_HOT_SPARE (0x04) +#define MPI2_RAID_PD_STATE_DEGRADED (0x05) +#define MPI2_RAID_PD_STATE_REBUILDING (0x06) +#define MPI2_RAID_PD_STATE_OPTIMAL (0x07) + +/*OfflineReason defines */ +#define MPI2_PHYSDISK0_ONLINE (0x00) +#define MPI2_PHYSDISK0_OFFLINE_MISSING (0x01) +#define MPI2_PHYSDISK0_OFFLINE_FAILED (0x03) +#define MPI2_PHYSDISK0_OFFLINE_INITIALIZING (0x04) +#define MPI2_PHYSDISK0_OFFLINE_REQUESTED (0x05) +#define MPI2_PHYSDISK0_OFFLINE_FAILED_REQUESTED (0x06) +#define MPI2_PHYSDISK0_OFFLINE_OTHER (0xFF) + +/*IncompatibleReason defines */ +#define MPI2_PHYSDISK0_COMPATIBLE (0x00) +#define MPI2_PHYSDISK0_INCOMPATIBLE_PROTOCOL (0x01) +#define MPI2_PHYSDISK0_INCOMPATIBLE_BLOCKSIZE (0x02) +#define MPI2_PHYSDISK0_INCOMPATIBLE_MAX_LBA (0x03) +#define MPI2_PHYSDISK0_INCOMPATIBLE_SATA_EXTENDED_CMD (0x04) +#define MPI2_PHYSDISK0_INCOMPATIBLE_REMOVEABLE_MEDIA (0x05) +#define MPI2_PHYSDISK0_INCOMPATIBLE_MEDIA_TYPE (0x06) +#define MPI2_PHYSDISK0_INCOMPATIBLE_UNKNOWN (0xFF) + +/*PhysDiskAttributes defines */ +#define MPI2_PHYSDISK0_ATTRIB_MEDIA_MASK (0x0C) +#define MPI2_PHYSDISK0_ATTRIB_SOLID_STATE_DRIVE (0x08) +#define MPI2_PHYSDISK0_ATTRIB_HARD_DISK_DRIVE (0x04) + +#define MPI2_PHYSDISK0_ATTRIB_PROTOCOL_MASK (0x03) +#define MPI2_PHYSDISK0_ATTRIB_SAS_PROTOCOL (0x02) +#define MPI2_PHYSDISK0_ATTRIB_SATA_PROTOCOL (0x01) + +/*PhysDiskStatusFlags defines */ +#define MPI2_PHYSDISK0_STATUS_FLAG_NOT_CERTIFIED (0x00000040) +#define MPI2_PHYSDISK0_STATUS_FLAG_OCE_TARGET (0x00000020) +#define MPI2_PHYSDISK0_STATUS_FLAG_WRITE_CACHE_ENABLED (0x00000010) +#define MPI2_PHYSDISK0_STATUS_FLAG_OPTIMAL_PREVIOUS (0x00000000) +#define MPI2_PHYSDISK0_STATUS_FLAG_NOT_OPTIMAL_PREVIOUS (0x00000008) +#define MPI2_PHYSDISK0_STATUS_FLAG_INACTIVE_VOLUME (0x00000004) +#define MPI2_PHYSDISK0_STATUS_FLAG_QUIESCED (0x00000002) +#define MPI2_PHYSDISK0_STATUS_FLAG_OUT_OF_SYNC (0x00000001) + + +/*RAID Physical Disk Page 1 */ + +/* + *Host code (drivers, BIOS, utilities, etc.) should leave this define set to + *one and check the value returned for NumPhysDiskPaths at runtime. + */ +#ifndef MPI2_RAID_PHYS_DISK1_PATH_MAX +#define MPI2_RAID_PHYS_DISK1_PATH_MAX (1) +#endif + +typedef struct _MPI2_RAIDPHYSDISK1_PATH { + U16 DevHandle; /*0x00 */ + U16 Reserved1; /*0x02 */ + U64 WWID; /*0x04 */ + U64 OwnerWWID; /*0x0C */ + U8 OwnerIdentifier; /*0x14 */ + U8 Reserved2; /*0x15 */ + U16 Flags; /*0x16 */ +} MPI2_RAIDPHYSDISK1_PATH, *PTR_MPI2_RAIDPHYSDISK1_PATH, + Mpi2RaidPhysDisk1Path_t, + *pMpi2RaidPhysDisk1Path_t; + +/*RAID Physical Disk Page 1 Physical Disk Path Flags field defines */ +#define MPI2_RAID_PHYSDISK1_FLAG_PRIMARY (0x0004) +#define MPI2_RAID_PHYSDISK1_FLAG_BROKEN (0x0002) +#define MPI2_RAID_PHYSDISK1_FLAG_INVALID (0x0001) + +typedef struct _MPI2_CONFIG_PAGE_RD_PDISK_1 { + MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */ + U8 NumPhysDiskPaths; /*0x04 */ + U8 PhysDiskNum; /*0x05 */ + U16 Reserved1; /*0x06 */ + U32 Reserved2; /*0x08 */ + MPI2_RAIDPHYSDISK1_PATH + PhysicalDiskPath[MPI2_RAID_PHYS_DISK1_PATH_MAX];/*0x0C */ +} MPI2_CONFIG_PAGE_RD_PDISK_1, + *PTR_MPI2_CONFIG_PAGE_RD_PDISK_1, + Mpi2RaidPhysDiskPage1_t, + *pMpi2RaidPhysDiskPage1_t; + +#define MPI2_RAIDPHYSDISKPAGE1_PAGEVERSION (0x02) + + +/**************************************************************************** +* values for fields used by several types of SAS Config Pages +****************************************************************************/ + +/*values for NegotiatedLinkRates fields */ +#define MPI2_SAS_NEG_LINK_RATE_MASK_LOGICAL (0xF0) +#define MPI2_SAS_NEG_LINK_RATE_SHIFT_LOGICAL (4) +#define MPI2_SAS_NEG_LINK_RATE_MASK_PHYSICAL (0x0F) +/*link rates used for Negotiated Physical and Logical Link Rate */ +#define MPI2_SAS_NEG_LINK_RATE_UNKNOWN_LINK_RATE (0x00) +#define MPI2_SAS_NEG_LINK_RATE_PHY_DISABLED (0x01) +#define MPI2_SAS_NEG_LINK_RATE_NEGOTIATION_FAILED (0x02) +#define MPI2_SAS_NEG_LINK_RATE_SATA_OOB_COMPLETE (0x03) +#define MPI2_SAS_NEG_LINK_RATE_PORT_SELECTOR (0x04) +#define MPI2_SAS_NEG_LINK_RATE_SMP_RESET_IN_PROGRESS (0x05) +#define MPI2_SAS_NEG_LINK_RATE_UNSUPPORTED_PHY (0x06) +#define MPI2_SAS_NEG_LINK_RATE_1_5 (0x08) +#define MPI2_SAS_NEG_LINK_RATE_3_0 (0x09) +#define MPI2_SAS_NEG_LINK_RATE_6_0 (0x0A) +#define MPI25_SAS_NEG_LINK_RATE_12_0 (0x0B) +#define MPI26_SAS_NEG_LINK_RATE_22_5 (0x0C) + + +/*values for AttachedPhyInfo fields */ +#define MPI2_SAS_APHYINFO_INSIDE_ZPSDS_PERSISTENT (0x00000040) +#define MPI2_SAS_APHYINFO_REQUESTED_INSIDE_ZPSDS (0x00000020) +#define MPI2_SAS_APHYINFO_BREAK_REPLY_CAPABLE (0x00000010) + +#define MPI2_SAS_APHYINFO_REASON_MASK (0x0000000F) +#define MPI2_SAS_APHYINFO_REASON_UNKNOWN (0x00000000) +#define MPI2_SAS_APHYINFO_REASON_POWER_ON (0x00000001) +#define MPI2_SAS_APHYINFO_REASON_HARD_RESET (0x00000002) +#define MPI2_SAS_APHYINFO_REASON_SMP_PHY_CONTROL (0x00000003) +#define MPI2_SAS_APHYINFO_REASON_LOSS_OF_SYNC (0x00000004) +#define MPI2_SAS_APHYINFO_REASON_MULTIPLEXING_SEQ (0x00000005) +#define MPI2_SAS_APHYINFO_REASON_IT_NEXUS_LOSS_TIMER (0x00000006) +#define MPI2_SAS_APHYINFO_REASON_BREAK_TIMEOUT (0x00000007) +#define MPI2_SAS_APHYINFO_REASON_PHY_TEST_STOPPED (0x00000008) + + +/*values for PhyInfo fields */ +#define MPI2_SAS_PHYINFO_PHY_VACANT (0x80000000) + +#define MPI2_SAS_PHYINFO_PHY_POWER_CONDITION_MASK (0x18000000) +#define MPI2_SAS_PHYINFO_SHIFT_PHY_POWER_CONDITION (27) +#define MPI2_SAS_PHYINFO_PHY_POWER_ACTIVE (0x00000000) +#define MPI2_SAS_PHYINFO_PHY_POWER_PARTIAL (0x08000000) +#define MPI2_SAS_PHYINFO_PHY_POWER_SLUMBER (0x10000000) + +#define MPI2_SAS_PHYINFO_CHANGED_REQ_INSIDE_ZPSDS (0x04000000) +#define MPI2_SAS_PHYINFO_INSIDE_ZPSDS_PERSISTENT (0x02000000) +#define MPI2_SAS_PHYINFO_REQ_INSIDE_ZPSDS (0x01000000) +#define MPI2_SAS_PHYINFO_ZONE_GROUP_PERSISTENT (0x00400000) +#define MPI2_SAS_PHYINFO_INSIDE_ZPSDS (0x00200000) +#define MPI2_SAS_PHYINFO_ZONING_ENABLED (0x00100000) + +#define MPI2_SAS_PHYINFO_REASON_MASK (0x000F0000) +#define MPI2_SAS_PHYINFO_REASON_UNKNOWN (0x00000000) +#define MPI2_SAS_PHYINFO_REASON_POWER_ON (0x00010000) +#define MPI2_SAS_PHYINFO_REASON_HARD_RESET (0x00020000) +#define MPI2_SAS_PHYINFO_REASON_SMP_PHY_CONTROL (0x00030000) +#define MPI2_SAS_PHYINFO_REASON_LOSS_OF_SYNC (0x00040000) +#define MPI2_SAS_PHYINFO_REASON_MULTIPLEXING_SEQ (0x00050000) +#define MPI2_SAS_PHYINFO_REASON_IT_NEXUS_LOSS_TIMER (0x00060000) +#define MPI2_SAS_PHYINFO_REASON_BREAK_TIMEOUT (0x00070000) +#define MPI2_SAS_PHYINFO_REASON_PHY_TEST_STOPPED (0x00080000) + +#define MPI2_SAS_PHYINFO_MULTIPLEXING_SUPPORTED (0x00008000) +#define MPI2_SAS_PHYINFO_SATA_PORT_ACTIVE (0x00004000) +#define MPI2_SAS_PHYINFO_SATA_PORT_SELECTOR_PRESENT (0x00002000) +#define MPI2_SAS_PHYINFO_VIRTUAL_PHY (0x00001000) + +#define MPI2_SAS_PHYINFO_MASK_PARTIAL_PATHWAY_TIME (0x00000F00) +#define MPI2_SAS_PHYINFO_SHIFT_PARTIAL_PATHWAY_TIME (8) + +#define MPI2_SAS_PHYINFO_MASK_ROUTING_ATTRIBUTE (0x000000F0) +#define MPI2_SAS_PHYINFO_DIRECT_ROUTING (0x00000000) +#define MPI2_SAS_PHYINFO_SUBTRACTIVE_ROUTING (0x00000010) +#define MPI2_SAS_PHYINFO_TABLE_ROUTING (0x00000020) + + +/*values for SAS ProgrammedLinkRate fields */ +#define MPI2_SAS_PRATE_MAX_RATE_MASK (0xF0) +#define MPI2_SAS_PRATE_MAX_RATE_NOT_PROGRAMMABLE (0x00) +#define MPI2_SAS_PRATE_MAX_RATE_1_5 (0x80) +#define MPI2_SAS_PRATE_MAX_RATE_3_0 (0x90) +#define MPI2_SAS_PRATE_MAX_RATE_6_0 (0xA0) +#define MPI25_SAS_PRATE_MAX_RATE_12_0 (0xB0) +#define MPI26_SAS_PRATE_MAX_RATE_22_5 (0xC0) +#define MPI2_SAS_PRATE_MIN_RATE_MASK (0x0F) +#define MPI2_SAS_PRATE_MIN_RATE_NOT_PROGRAMMABLE (0x00) +#define MPI2_SAS_PRATE_MIN_RATE_1_5 (0x08) +#define MPI2_SAS_PRATE_MIN_RATE_3_0 (0x09) +#define MPI2_SAS_PRATE_MIN_RATE_6_0 (0x0A) +#define MPI25_SAS_PRATE_MIN_RATE_12_0 (0x0B) +#define MPI26_SAS_PRATE_MIN_RATE_22_5 (0x0C) + + +/*values for SAS HwLinkRate fields */ +#define MPI2_SAS_HWRATE_MAX_RATE_MASK (0xF0) +#define MPI2_SAS_HWRATE_MAX_RATE_1_5 (0x80) +#define MPI2_SAS_HWRATE_MAX_RATE_3_0 (0x90) +#define MPI2_SAS_HWRATE_MAX_RATE_6_0 (0xA0) +#define MPI25_SAS_HWRATE_MAX_RATE_12_0 (0xB0) +#define MPI26_SAS_HWRATE_MAX_RATE_22_5 (0xC0) +#define MPI2_SAS_HWRATE_MIN_RATE_MASK (0x0F) +#define MPI2_SAS_HWRATE_MIN_RATE_1_5 (0x08) +#define MPI2_SAS_HWRATE_MIN_RATE_3_0 (0x09) +#define MPI2_SAS_HWRATE_MIN_RATE_6_0 (0x0A) +#define MPI25_SAS_HWRATE_MIN_RATE_12_0 (0x0B) +#define MPI26_SAS_HWRATE_MIN_RATE_22_5 (0x0C) + + + +/**************************************************************************** +* SAS IO Unit Config Pages +****************************************************************************/ + +/*SAS IO Unit Page 0 */ + +typedef struct _MPI2_SAS_IO_UNIT0_PHY_DATA { + U8 Port; /*0x00 */ + U8 PortFlags; /*0x01 */ + U8 PhyFlags; /*0x02 */ + U8 NegotiatedLinkRate; /*0x03 */ + U32 ControllerPhyDeviceInfo;/*0x04 */ + U16 AttachedDevHandle; /*0x08 */ + U16 ControllerDevHandle; /*0x0A */ + U32 DiscoveryStatus; /*0x0C */ + U32 Reserved; /*0x10 */ +} MPI2_SAS_IO_UNIT0_PHY_DATA, + *PTR_MPI2_SAS_IO_UNIT0_PHY_DATA, + Mpi2SasIOUnit0PhyData_t, + *pMpi2SasIOUnit0PhyData_t; + +/* + *Host code (drivers, BIOS, utilities, etc.) should leave this define set to + *one and check the value returned for NumPhys at runtime. + */ +#ifndef MPI2_SAS_IOUNIT0_PHY_MAX +#define MPI2_SAS_IOUNIT0_PHY_MAX (1) +#endif + +typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_0 { + MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /*0x00 */ + U32 Reserved1;/*0x08 */ + U8 NumPhys; /*0x0C */ + U8 Reserved2;/*0x0D */ + U16 Reserved3;/*0x0E */ + MPI2_SAS_IO_UNIT0_PHY_DATA + PhyData[MPI2_SAS_IOUNIT0_PHY_MAX]; /*0x10 */ +} MPI2_CONFIG_PAGE_SASIOUNIT_0, + *PTR_MPI2_CONFIG_PAGE_SASIOUNIT_0, + Mpi2SasIOUnitPage0_t, *pMpi2SasIOUnitPage0_t; + +#define MPI2_SASIOUNITPAGE0_PAGEVERSION (0x05) + +/*values for SAS IO Unit Page 0 PortFlags */ +#define MPI2_SASIOUNIT0_PORTFLAGS_DISCOVERY_IN_PROGRESS (0x08) +#define MPI2_SASIOUNIT0_PORTFLAGS_AUTO_PORT_CONFIG (0x01) + +/*values for SAS IO Unit Page 0 PhyFlags */ +#define MPI2_SASIOUNIT0_PHYFLAGS_INIT_PERSIST_CONNECT (0x40) +#define MPI2_SASIOUNIT0_PHYFLAGS_TARG_PERSIST_CONNECT (0x20) +#define MPI2_SASIOUNIT0_PHYFLAGS_ZONING_ENABLED (0x10) +#define MPI2_SASIOUNIT0_PHYFLAGS_PHY_DISABLED (0x08) + +/*use MPI2_SAS_NEG_LINK_RATE_ defines for the NegotiatedLinkRate field */ + +/*see mpi2_sas.h for values for + *SAS IO Unit Page 0 ControllerPhyDeviceInfo values */ + +/*values for SAS IO Unit Page 0 DiscoveryStatus */ +#define MPI2_SASIOUNIT0_DS_MAX_ENCLOSURES_EXCEED (0x80000000) +#define MPI2_SASIOUNIT0_DS_MAX_EXPANDERS_EXCEED (0x40000000) +#define MPI2_SASIOUNIT0_DS_MAX_DEVICES_EXCEED (0x20000000) +#define MPI2_SASIOUNIT0_DS_MAX_TOPO_PHYS_EXCEED (0x10000000) +#define MPI2_SASIOUNIT0_DS_DOWNSTREAM_INITIATOR (0x08000000) +#define MPI2_SASIOUNIT0_DS_MULTI_SUBTRACTIVE_SUBTRACTIVE (0x00008000) +#define MPI2_SASIOUNIT0_DS_EXP_MULTI_SUBTRACTIVE (0x00004000) +#define MPI2_SASIOUNIT0_DS_MULTI_PORT_DOMAIN (0x00002000) +#define MPI2_SASIOUNIT0_DS_TABLE_TO_SUBTRACTIVE_LINK (0x00001000) +#define MPI2_SASIOUNIT0_DS_UNSUPPORTED_DEVICE (0x00000800) +#define MPI2_SASIOUNIT0_DS_TABLE_LINK (0x00000400) +#define MPI2_SASIOUNIT0_DS_SUBTRACTIVE_LINK (0x00000200) +#define MPI2_SASIOUNIT0_DS_SMP_CRC_ERROR (0x00000100) +#define MPI2_SASIOUNIT0_DS_SMP_FUNCTION_FAILED (0x00000080) +#define MPI2_SASIOUNIT0_DS_INDEX_NOT_EXIST (0x00000040) +#define MPI2_SASIOUNIT0_DS_OUT_ROUTE_ENTRIES (0x00000020) +#define MPI2_SASIOUNIT0_DS_SMP_TIMEOUT (0x00000010) +#define MPI2_SASIOUNIT0_DS_MULTIPLE_PORTS (0x00000004) +#define MPI2_SASIOUNIT0_DS_UNADDRESSABLE_DEVICE (0x00000002) +#define MPI2_SASIOUNIT0_DS_LOOP_DETECTED (0x00000001) + + +/*SAS IO Unit Page 1 */ + +typedef struct _MPI2_SAS_IO_UNIT1_PHY_DATA { + U8 Port; /*0x00 */ + U8 PortFlags; /*0x01 */ + U8 PhyFlags; /*0x02 */ + U8 MaxMinLinkRate; /*0x03 */ + U32 ControllerPhyDeviceInfo; /*0x04 */ + U16 MaxTargetPortConnectTime; /*0x08 */ + U16 Reserved1; /*0x0A */ +} MPI2_SAS_IO_UNIT1_PHY_DATA, + *PTR_MPI2_SAS_IO_UNIT1_PHY_DATA, + Mpi2SasIOUnit1PhyData_t, + *pMpi2SasIOUnit1PhyData_t; + +/* + *Host code (drivers, BIOS, utilities, etc.) should leave this define set to + *one and check the value returned for NumPhys at runtime. + */ +#ifndef MPI2_SAS_IOUNIT1_PHY_MAX +#define MPI2_SAS_IOUNIT1_PHY_MAX (1) +#endif + +typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_1 { + MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /*0x00 */ + U16 + ControlFlags; /*0x08 */ + U16 + SASNarrowMaxQueueDepth; /*0x0A */ + U16 + AdditionalControlFlags; /*0x0C */ + U16 + SASWideMaxQueueDepth; /*0x0E */ + U8 + NumPhys; /*0x10 */ + U8 + SATAMaxQDepth; /*0x11 */ + U8 + ReportDeviceMissingDelay; /*0x12 */ + U8 + IODeviceMissingDelay; /*0x13 */ + MPI2_SAS_IO_UNIT1_PHY_DATA + PhyData[MPI2_SAS_IOUNIT1_PHY_MAX]; /*0x14 */ +} MPI2_CONFIG_PAGE_SASIOUNIT_1, + *PTR_MPI2_CONFIG_PAGE_SASIOUNIT_1, + Mpi2SasIOUnitPage1_t, *pMpi2SasIOUnitPage1_t; + +#define MPI2_SASIOUNITPAGE1_PAGEVERSION (0x09) + +/*values for SAS IO Unit Page 1 ControlFlags */ +#define MPI2_SASIOUNIT1_CONTROL_DEVICE_SELF_TEST (0x8000) +#define MPI2_SASIOUNIT1_CONTROL_SATA_3_0_MAX (0x4000) +#define MPI2_SASIOUNIT1_CONTROL_SATA_1_5_MAX (0x2000) +#define MPI2_SASIOUNIT1_CONTROL_SATA_SW_PRESERVE (0x1000) + +#define MPI2_SASIOUNIT1_CONTROL_MASK_DEV_SUPPORT (0x0600) +#define MPI2_SASIOUNIT1_CONTROL_SHIFT_DEV_SUPPORT (9) +#define MPI2_SASIOUNIT1_CONTROL_DEV_SUPPORT_BOTH (0x0) +#define MPI2_SASIOUNIT1_CONTROL_DEV_SAS_SUPPORT (0x1) +#define MPI2_SASIOUNIT1_CONTROL_DEV_SATA_SUPPORT (0x2) + +#define MPI2_SASIOUNIT1_CONTROL_SATA_48BIT_LBA_REQUIRED (0x0080) +#define MPI2_SASIOUNIT1_CONTROL_SATA_SMART_REQUIRED (0x0040) +#define MPI2_SASIOUNIT1_CONTROL_SATA_NCQ_REQUIRED (0x0020) +#define MPI2_SASIOUNIT1_CONTROL_SATA_FUA_REQUIRED (0x0010) +#define MPI2_SASIOUNIT1_CONTROL_TABLE_SUBTRACTIVE_ILLEGAL (0x0008) +#define MPI2_SASIOUNIT1_CONTROL_SUBTRACTIVE_ILLEGAL (0x0004) +#define MPI2_SASIOUNIT1_CONTROL_FIRST_LVL_DISC_ONLY (0x0002) +#define MPI2_SASIOUNIT1_CONTROL_CLEAR_AFFILIATION (0x0001) + +/*values for SAS IO Unit Page 1 AdditionalControlFlags */ +#define MPI2_SASIOUNIT1_ACONTROL_DA_PERSIST_CONNECT (0x0100) +#define MPI2_SASIOUNIT1_ACONTROL_MULTI_PORT_DOMAIN_ILLEGAL (0x0080) +#define MPI2_SASIOUNIT1_ACONTROL_SATA_ASYNCHROUNOUS_NOTIFICATION (0x0040) +#define MPI2_SASIOUNIT1_ACONTROL_INVALID_TOPOLOGY_CORRECTION (0x0020) +#define MPI2_SASIOUNIT1_ACONTROL_PORT_ENABLE_ONLY_SATA_LINK_RESET (0x0010) +#define MPI2_SASIOUNIT1_ACONTROL_OTHER_AFFILIATION_SATA_LINK_RESET (0x0008) +#define MPI2_SASIOUNIT1_ACONTROL_SELF_AFFILIATION_SATA_LINK_RESET (0x0004) +#define MPI2_SASIOUNIT1_ACONTROL_NO_AFFILIATION_SATA_LINK_RESET (0x0002) +#define MPI2_SASIOUNIT1_ACONTROL_ALLOW_TABLE_TO_TABLE (0x0001) + +/*defines for SAS IO Unit Page 1 ReportDeviceMissingDelay */ +#define MPI2_SASIOUNIT1_REPORT_MISSING_TIMEOUT_MASK (0x7F) +#define MPI2_SASIOUNIT1_REPORT_MISSING_UNIT_16 (0x80) + +/*values for SAS IO Unit Page 1 PortFlags */ +#define MPI2_SASIOUNIT1_PORT_FLAGS_AUTO_PORT_CONFIG (0x01) + +/*values for SAS IO Unit Page 1 PhyFlags */ +#define MPI2_SASIOUNIT1_PHYFLAGS_INIT_PERSIST_CONNECT (0x40) +#define MPI2_SASIOUNIT1_PHYFLAGS_TARG_PERSIST_CONNECT (0x20) +#define MPI2_SASIOUNIT1_PHYFLAGS_ZONING_ENABLE (0x10) +#define MPI2_SASIOUNIT1_PHYFLAGS_PHY_DISABLE (0x08) + +/*values for SAS IO Unit Page 1 MaxMinLinkRate */ +#define MPI2_SASIOUNIT1_MAX_RATE_MASK (0xF0) +#define MPI2_SASIOUNIT1_MAX_RATE_1_5 (0x80) +#define MPI2_SASIOUNIT1_MAX_RATE_3_0 (0x90) +#define MPI2_SASIOUNIT1_MAX_RATE_6_0 (0xA0) +#define MPI25_SASIOUNIT1_MAX_RATE_12_0 (0xB0) +#define MPI26_SASIOUNIT1_MAX_RATE_22_5 (0xC0) +#define MPI2_SASIOUNIT1_MIN_RATE_MASK (0x0F) +#define MPI2_SASIOUNIT1_MIN_RATE_1_5 (0x08) +#define MPI2_SASIOUNIT1_MIN_RATE_3_0 (0x09) +#define MPI2_SASIOUNIT1_MIN_RATE_6_0 (0x0A) +#define MPI25_SASIOUNIT1_MIN_RATE_12_0 (0x0B) +#define MPI26_SASIOUNIT1_MIN_RATE_22_5 (0x0C) + +/*see mpi2_sas.h for values for + *SAS IO Unit Page 1 ControllerPhyDeviceInfo values */ + + +/*SAS IO Unit Page 4 (for MPI v2.5 and earlier) */ + +typedef struct _MPI2_SAS_IOUNIT4_SPINUP_GROUP { + U8 MaxTargetSpinup; /*0x00 */ + U8 SpinupDelay; /*0x01 */ + U8 SpinupFlags; /*0x02 */ + U8 Reserved1; /*0x03 */ +} MPI2_SAS_IOUNIT4_SPINUP_GROUP, + *PTR_MPI2_SAS_IOUNIT4_SPINUP_GROUP, + Mpi2SasIOUnit4SpinupGroup_t, + *pMpi2SasIOUnit4SpinupGroup_t; +/*defines for SAS IO Unit Page 4 SpinupFlags */ +#define MPI2_SASIOUNIT4_SPINUP_DISABLE_FLAG (0x01) + + +/* + *Host code (drivers, BIOS, utilities, etc.) should leave this define set to + *one and check the value returned for NumPhys at runtime. + */ +#ifndef MPI2_SAS_IOUNIT4_PHY_MAX +#define MPI2_SAS_IOUNIT4_PHY_MAX (4) +#endif + +typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_4 { + MPI2_CONFIG_EXTENDED_PAGE_HEADER Header;/*0x00 */ + MPI2_SAS_IOUNIT4_SPINUP_GROUP + SpinupGroupParameters[4]; /*0x08 */ + U32 + Reserved1; /*0x18 */ + U32 + Reserved2; /*0x1C */ + U32 + Reserved3; /*0x20 */ + U8 + BootDeviceWaitTime; /*0x24 */ + U8 + SATADeviceWaitTime; /*0x25 */ + U16 + Reserved5; /*0x26 */ + U8 + NumPhys; /*0x28 */ + U8 + PEInitialSpinupDelay; /*0x29 */ + U8 + PEReplyDelay; /*0x2A */ + U8 + Flags; /*0x2B */ + U8 + PHY[MPI2_SAS_IOUNIT4_PHY_MAX]; /*0x2C */ +} MPI2_CONFIG_PAGE_SASIOUNIT_4, + *PTR_MPI2_CONFIG_PAGE_SASIOUNIT_4, + Mpi2SasIOUnitPage4_t, *pMpi2SasIOUnitPage4_t; + +#define MPI2_SASIOUNITPAGE4_PAGEVERSION (0x02) + +/*defines for Flags field */ +#define MPI2_SASIOUNIT4_FLAGS_AUTO_PORTENABLE (0x01) + +/*defines for PHY field */ +#define MPI2_SASIOUNIT4_PHY_SPINUP_GROUP_MASK (0x03) + + +/*SAS IO Unit Page 5 */ + +typedef struct _MPI2_SAS_IO_UNIT5_PHY_PM_SETTINGS { + U8 ControlFlags; /*0x00 */ + U8 PortWidthModGroup; /*0x01 */ + U16 InactivityTimerExponent; /*0x02 */ + U8 SATAPartialTimeout; /*0x04 */ + U8 Reserved2; /*0x05 */ + U8 SATASlumberTimeout; /*0x06 */ + U8 Reserved3; /*0x07 */ + U8 SASPartialTimeout; /*0x08 */ + U8 Reserved4; /*0x09 */ + U8 SASSlumberTimeout; /*0x0A */ + U8 Reserved5; /*0x0B */ +} MPI2_SAS_IO_UNIT5_PHY_PM_SETTINGS, + *PTR_MPI2_SAS_IO_UNIT5_PHY_PM_SETTINGS, + Mpi2SasIOUnit5PhyPmSettings_t, + *pMpi2SasIOUnit5PhyPmSettings_t; + +/*defines for ControlFlags field */ +#define MPI2_SASIOUNIT5_CONTROL_SAS_SLUMBER_ENABLE (0x08) +#define MPI2_SASIOUNIT5_CONTROL_SAS_PARTIAL_ENABLE (0x04) +#define MPI2_SASIOUNIT5_CONTROL_SATA_SLUMBER_ENABLE (0x02) +#define MPI2_SASIOUNIT5_CONTROL_SATA_PARTIAL_ENABLE (0x01) + +/*defines for PortWidthModeGroup field */ +#define MPI2_SASIOUNIT5_PWMG_DISABLE (0xFF) + +/*defines for InactivityTimerExponent field */ +#define MPI2_SASIOUNIT5_ITE_MASK_SAS_SLUMBER (0x7000) +#define MPI2_SASIOUNIT5_ITE_SHIFT_SAS_SLUMBER (12) +#define MPI2_SASIOUNIT5_ITE_MASK_SAS_PARTIAL (0x0700) +#define MPI2_SASIOUNIT5_ITE_SHIFT_SAS_PARTIAL (8) +#define MPI2_SASIOUNIT5_ITE_MASK_SATA_SLUMBER (0x0070) +#define MPI2_SASIOUNIT5_ITE_SHIFT_SATA_SLUMBER (4) +#define MPI2_SASIOUNIT5_ITE_MASK_SATA_PARTIAL (0x0007) +#define MPI2_SASIOUNIT5_ITE_SHIFT_SATA_PARTIAL (0) + +#define MPI2_SASIOUNIT5_ITE_TEN_SECONDS (7) +#define MPI2_SASIOUNIT5_ITE_ONE_SECOND (6) +#define MPI2_SASIOUNIT5_ITE_HUNDRED_MILLISECONDS (5) +#define MPI2_SASIOUNIT5_ITE_TEN_MILLISECONDS (4) +#define MPI2_SASIOUNIT5_ITE_ONE_MILLISECOND (3) +#define MPI2_SASIOUNIT5_ITE_HUNDRED_MICROSECONDS (2) +#define MPI2_SASIOUNIT5_ITE_TEN_MICROSECONDS (1) +#define MPI2_SASIOUNIT5_ITE_ONE_MICROSECOND (0) + +/* + *Host code (drivers, BIOS, utilities, etc.) should leave this define set to + *one and check the value returned for NumPhys at runtime. + */ +#ifndef MPI2_SAS_IOUNIT5_PHY_MAX +#define MPI2_SAS_IOUNIT5_PHY_MAX (1) +#endif + +typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_5 { + MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /*0x00 */ + U8 NumPhys; /*0x08 */ + U8 Reserved1;/*0x09 */ + U16 Reserved2;/*0x0A */ + U32 Reserved3;/*0x0C */ + MPI2_SAS_IO_UNIT5_PHY_PM_SETTINGS + SASPhyPowerManagementSettings[MPI2_SAS_IOUNIT5_PHY_MAX];/*0x10 */ +} MPI2_CONFIG_PAGE_SASIOUNIT_5, + *PTR_MPI2_CONFIG_PAGE_SASIOUNIT_5, + Mpi2SasIOUnitPage5_t, *pMpi2SasIOUnitPage5_t; + +#define MPI2_SASIOUNITPAGE5_PAGEVERSION (0x01) + + +/*SAS IO Unit Page 6 */ + +typedef struct _MPI2_SAS_IO_UNIT6_PORT_WIDTH_MOD_GROUP_STATUS { + U8 CurrentStatus; /*0x00 */ + U8 CurrentModulation; /*0x01 */ + U8 CurrentUtilization; /*0x02 */ + U8 Reserved1; /*0x03 */ + U32 Reserved2; /*0x04 */ +} MPI2_SAS_IO_UNIT6_PORT_WIDTH_MOD_GROUP_STATUS, + *PTR_MPI2_SAS_IO_UNIT6_PORT_WIDTH_MOD_GROUP_STATUS, + Mpi2SasIOUnit6PortWidthModGroupStatus_t, + *pMpi2SasIOUnit6PortWidthModGroupStatus_t; + +/*defines for CurrentStatus field */ +#define MPI2_SASIOUNIT6_STATUS_UNAVAILABLE (0x00) +#define MPI2_SASIOUNIT6_STATUS_UNCONFIGURED (0x01) +#define MPI2_SASIOUNIT6_STATUS_INVALID_CONFIG (0x02) +#define MPI2_SASIOUNIT6_STATUS_LINK_DOWN (0x03) +#define MPI2_SASIOUNIT6_STATUS_OBSERVATION_ONLY (0x04) +#define MPI2_SASIOUNIT6_STATUS_INACTIVE (0x05) +#define MPI2_SASIOUNIT6_STATUS_ACTIVE_IOUNIT (0x06) +#define MPI2_SASIOUNIT6_STATUS_ACTIVE_HOST (0x07) + +/*defines for CurrentModulation field */ +#define MPI2_SASIOUNIT6_MODULATION_25_PERCENT (0x00) +#define MPI2_SASIOUNIT6_MODULATION_50_PERCENT (0x01) +#define MPI2_SASIOUNIT6_MODULATION_75_PERCENT (0x02) +#define MPI2_SASIOUNIT6_MODULATION_100_PERCENT (0x03) + +/* + *Host code (drivers, BIOS, utilities, etc.) should leave this define set to + *one and check the value returned for NumGroups at runtime. + */ +#ifndef MPI2_SAS_IOUNIT6_GROUP_MAX +#define MPI2_SAS_IOUNIT6_GROUP_MAX (1) +#endif + +typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_6 { + MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /*0x00 */ + U32 Reserved1; /*0x08 */ + U32 Reserved2; /*0x0C */ + U8 NumGroups; /*0x10 */ + U8 Reserved3; /*0x11 */ + U16 Reserved4; /*0x12 */ + MPI2_SAS_IO_UNIT6_PORT_WIDTH_MOD_GROUP_STATUS + PortWidthModulationGroupStatus[MPI2_SAS_IOUNIT6_GROUP_MAX]; /*0x14 */ +} MPI2_CONFIG_PAGE_SASIOUNIT_6, + *PTR_MPI2_CONFIG_PAGE_SASIOUNIT_6, + Mpi2SasIOUnitPage6_t, *pMpi2SasIOUnitPage6_t; + +#define MPI2_SASIOUNITPAGE6_PAGEVERSION (0x00) + + +/*SAS IO Unit Page 7 */ + +typedef struct _MPI2_SAS_IO_UNIT7_PORT_WIDTH_MOD_GROUP_SETTINGS { + U8 Flags; /*0x00 */ + U8 Reserved1; /*0x01 */ + U16 Reserved2; /*0x02 */ + U8 Threshold75Pct; /*0x04 */ + U8 Threshold50Pct; /*0x05 */ + U8 Threshold25Pct; /*0x06 */ + U8 Reserved3; /*0x07 */ +} MPI2_SAS_IO_UNIT7_PORT_WIDTH_MOD_GROUP_SETTINGS, + *PTR_MPI2_SAS_IO_UNIT7_PORT_WIDTH_MOD_GROUP_SETTINGS, + Mpi2SasIOUnit7PortWidthModGroupSettings_t, + *pMpi2SasIOUnit7PortWidthModGroupSettings_t; + +/*defines for Flags field */ +#define MPI2_SASIOUNIT7_FLAGS_ENABLE_PORT_WIDTH_MODULATION (0x01) + + +/* + *Host code (drivers, BIOS, utilities, etc.) should leave this define set to + *one and check the value returned for NumGroups at runtime. + */ +#ifndef MPI2_SAS_IOUNIT7_GROUP_MAX +#define MPI2_SAS_IOUNIT7_GROUP_MAX (1) +#endif + +typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_7 { + MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /*0x00 */ + U8 SamplingInterval; /*0x08 */ + U8 WindowLength; /*0x09 */ + U16 Reserved1; /*0x0A */ + U32 Reserved2; /*0x0C */ + U32 Reserved3; /*0x10 */ + U8 NumGroups; /*0x14 */ + U8 Reserved4; /*0x15 */ + U16 Reserved5; /*0x16 */ + MPI2_SAS_IO_UNIT7_PORT_WIDTH_MOD_GROUP_SETTINGS + PortWidthModulationGroupSettings[MPI2_SAS_IOUNIT7_GROUP_MAX];/*0x18 */ +} MPI2_CONFIG_PAGE_SASIOUNIT_7, + *PTR_MPI2_CONFIG_PAGE_SASIOUNIT_7, + Mpi2SasIOUnitPage7_t, *pMpi2SasIOUnitPage7_t; + +#define MPI2_SASIOUNITPAGE7_PAGEVERSION (0x00) + + +/*SAS IO Unit Page 8 */ + +typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_8 { + MPI2_CONFIG_EXTENDED_PAGE_HEADER + Header; /*0x00 */ + U32 + Reserved1; /*0x08 */ + U32 + PowerManagementCapabilities; /*0x0C */ + U8 + TxRxSleepStatus; /*0x10 */ + U8 + Reserved2; /*0x11 */ + U16 + Reserved3; /*0x12 */ +} MPI2_CONFIG_PAGE_SASIOUNIT_8, + *PTR_MPI2_CONFIG_PAGE_SASIOUNIT_8, + Mpi2SasIOUnitPage8_t, *pMpi2SasIOUnitPage8_t; + +#define MPI2_SASIOUNITPAGE8_PAGEVERSION (0x00) + +/*defines for PowerManagementCapabilities field */ +#define MPI2_SASIOUNIT8_PM_HOST_PORT_WIDTH_MOD (0x00001000) +#define MPI2_SASIOUNIT8_PM_HOST_SAS_SLUMBER_MODE (0x00000800) +#define MPI2_SASIOUNIT8_PM_HOST_SAS_PARTIAL_MODE (0x00000400) +#define MPI2_SASIOUNIT8_PM_HOST_SATA_SLUMBER_MODE (0x00000200) +#define MPI2_SASIOUNIT8_PM_HOST_SATA_PARTIAL_MODE (0x00000100) +#define MPI2_SASIOUNIT8_PM_IOUNIT_PORT_WIDTH_MOD (0x00000010) +#define MPI2_SASIOUNIT8_PM_IOUNIT_SAS_SLUMBER_MODE (0x00000008) +#define MPI2_SASIOUNIT8_PM_IOUNIT_SAS_PARTIAL_MODE (0x00000004) +#define MPI2_SASIOUNIT8_PM_IOUNIT_SATA_SLUMBER_MODE (0x00000002) +#define MPI2_SASIOUNIT8_PM_IOUNIT_SATA_PARTIAL_MODE (0x00000001) + +/*defines for TxRxSleepStatus field */ +#define MPI25_SASIOUNIT8_TXRXSLEEP_UNSUPPORTED (0x00) +#define MPI25_SASIOUNIT8_TXRXSLEEP_DISENGAGED (0x01) +#define MPI25_SASIOUNIT8_TXRXSLEEP_ACTIVE (0x02) +#define MPI25_SASIOUNIT8_TXRXSLEEP_SHUTDOWN (0x03) + + + +/*SAS IO Unit Page 16 */ + +typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT16 { + MPI2_CONFIG_EXTENDED_PAGE_HEADER + Header; /*0x00 */ + U64 + TimeStamp; /*0x08 */ + U32 + Reserved1; /*0x10 */ + U32 + Reserved2; /*0x14 */ + U32 + FastPathPendedRequests; /*0x18 */ + U32 + FastPathUnPendedRequests; /*0x1C */ + U32 + FastPathHostRequestStarts; /*0x20 */ + U32 + FastPathFirmwareRequestStarts; /*0x24 */ + U32 + FastPathHostCompletions; /*0x28 */ + U32 + FastPathFirmwareCompletions; /*0x2C */ + U32 + NonFastPathRequestStarts; /*0x30 */ + U32 + NonFastPathHostCompletions; /*0x30 */ +} MPI2_CONFIG_PAGE_SASIOUNIT16, + *PTR_MPI2_CONFIG_PAGE_SASIOUNIT16, + Mpi2SasIOUnitPage16_t, *pMpi2SasIOUnitPage16_t; + +#define MPI2_SASIOUNITPAGE16_PAGEVERSION (0x00) + + +/**************************************************************************** +* SAS Expander Config Pages +****************************************************************************/ + +/*SAS Expander Page 0 */ + +typedef struct _MPI2_CONFIG_PAGE_EXPANDER_0 { + MPI2_CONFIG_EXTENDED_PAGE_HEADER + Header; /*0x00 */ + U8 + PhysicalPort; /*0x08 */ + U8 + ReportGenLength; /*0x09 */ + U16 + EnclosureHandle; /*0x0A */ + U64 + SASAddress; /*0x0C */ + U32 + DiscoveryStatus; /*0x14 */ + U16 + DevHandle; /*0x18 */ + U16 + ParentDevHandle; /*0x1A */ + U16 + ExpanderChangeCount; /*0x1C */ + U16 + ExpanderRouteIndexes; /*0x1E */ + U8 + NumPhys; /*0x20 */ + U8 + SASLevel; /*0x21 */ + U16 + Flags; /*0x22 */ + U16 + STPBusInactivityTimeLimit; /*0x24 */ + U16 + STPMaxConnectTimeLimit; /*0x26 */ + U16 + STP_SMP_NexusLossTime; /*0x28 */ + U16 + MaxNumRoutedSasAddresses; /*0x2A */ + U64 + ActiveZoneManagerSASAddress;/*0x2C */ + U16 + ZoneLockInactivityLimit; /*0x34 */ + U16 + Reserved1; /*0x36 */ + U8 + TimeToReducedFunc; /*0x38 */ + U8 + InitialTimeToReducedFunc; /*0x39 */ + U8 + MaxReducedFuncTime; /*0x3A */ + U8 + Reserved2; /*0x3B */ +} MPI2_CONFIG_PAGE_EXPANDER_0, + *PTR_MPI2_CONFIG_PAGE_EXPANDER_0, + Mpi2ExpanderPage0_t, *pMpi2ExpanderPage0_t; + +#define MPI2_SASEXPANDER0_PAGEVERSION (0x06) + +/*values for SAS Expander Page 0 DiscoveryStatus field */ +#define MPI2_SAS_EXPANDER0_DS_MAX_ENCLOSURES_EXCEED (0x80000000) +#define MPI2_SAS_EXPANDER0_DS_MAX_EXPANDERS_EXCEED (0x40000000) +#define MPI2_SAS_EXPANDER0_DS_MAX_DEVICES_EXCEED (0x20000000) +#define MPI2_SAS_EXPANDER0_DS_MAX_TOPO_PHYS_EXCEED (0x10000000) +#define MPI2_SAS_EXPANDER0_DS_DOWNSTREAM_INITIATOR (0x08000000) +#define MPI2_SAS_EXPANDER0_DS_MULTI_SUBTRACTIVE_SUBTRACTIVE (0x00008000) +#define MPI2_SAS_EXPANDER0_DS_EXP_MULTI_SUBTRACTIVE (0x00004000) +#define MPI2_SAS_EXPANDER0_DS_MULTI_PORT_DOMAIN (0x00002000) +#define MPI2_SAS_EXPANDER0_DS_TABLE_TO_SUBTRACTIVE_LINK (0x00001000) +#define MPI2_SAS_EXPANDER0_DS_UNSUPPORTED_DEVICE (0x00000800) +#define MPI2_SAS_EXPANDER0_DS_TABLE_LINK (0x00000400) +#define MPI2_SAS_EXPANDER0_DS_SUBTRACTIVE_LINK (0x00000200) +#define MPI2_SAS_EXPANDER0_DS_SMP_CRC_ERROR (0x00000100) +#define MPI2_SAS_EXPANDER0_DS_SMP_FUNCTION_FAILED (0x00000080) +#define MPI2_SAS_EXPANDER0_DS_INDEX_NOT_EXIST (0x00000040) +#define MPI2_SAS_EXPANDER0_DS_OUT_ROUTE_ENTRIES (0x00000020) +#define MPI2_SAS_EXPANDER0_DS_SMP_TIMEOUT (0x00000010) +#define MPI2_SAS_EXPANDER0_DS_MULTIPLE_PORTS (0x00000004) +#define MPI2_SAS_EXPANDER0_DS_UNADDRESSABLE_DEVICE (0x00000002) +#define MPI2_SAS_EXPANDER0_DS_LOOP_DETECTED (0x00000001) + +/*values for SAS Expander Page 0 Flags field */ +#define MPI2_SAS_EXPANDER0_FLAGS_REDUCED_FUNCTIONALITY (0x2000) +#define MPI2_SAS_EXPANDER0_FLAGS_ZONE_LOCKED (0x1000) +#define MPI2_SAS_EXPANDER0_FLAGS_SUPPORTED_PHYSICAL_PRES (0x0800) +#define MPI2_SAS_EXPANDER0_FLAGS_ASSERTED_PHYSICAL_PRES (0x0400) +#define MPI2_SAS_EXPANDER0_FLAGS_ZONING_SUPPORT (0x0200) +#define MPI2_SAS_EXPANDER0_FLAGS_ENABLED_ZONING (0x0100) +#define MPI2_SAS_EXPANDER0_FLAGS_TABLE_TO_TABLE_SUPPORT (0x0080) +#define MPI2_SAS_EXPANDER0_FLAGS_CONNECTOR_END_DEVICE (0x0010) +#define MPI2_SAS_EXPANDER0_FLAGS_OTHERS_CONFIG (0x0004) +#define MPI2_SAS_EXPANDER0_FLAGS_CONFIG_IN_PROGRESS (0x0002) +#define MPI2_SAS_EXPANDER0_FLAGS_ROUTE_TABLE_CONFIG (0x0001) + + +/*SAS Expander Page 1 */ + +typedef struct _MPI2_CONFIG_PAGE_EXPANDER_1 { + MPI2_CONFIG_EXTENDED_PAGE_HEADER + Header; /*0x00 */ + U8 + PhysicalPort; /*0x08 */ + U8 + Reserved1; /*0x09 */ + U16 + Reserved2; /*0x0A */ + U8 + NumPhys; /*0x0C */ + U8 + Phy; /*0x0D */ + U16 + NumTableEntriesProgrammed; /*0x0E */ + U8 + ProgrammedLinkRate; /*0x10 */ + U8 + HwLinkRate; /*0x11 */ + U16 + AttachedDevHandle; /*0x12 */ + U32 + PhyInfo; /*0x14 */ + U32 + AttachedDeviceInfo; /*0x18 */ + U16 + ExpanderDevHandle; /*0x1C */ + U8 + ChangeCount; /*0x1E */ + U8 + NegotiatedLinkRate; /*0x1F */ + U8 + PhyIdentifier; /*0x20 */ + U8 + AttachedPhyIdentifier; /*0x21 */ + U8 + Reserved3; /*0x22 */ + U8 + DiscoveryInfo; /*0x23 */ + U32 + AttachedPhyInfo; /*0x24 */ + U8 + ZoneGroup; /*0x28 */ + U8 + SelfConfigStatus; /*0x29 */ + U16 + Reserved4; /*0x2A */ +} MPI2_CONFIG_PAGE_EXPANDER_1, + *PTR_MPI2_CONFIG_PAGE_EXPANDER_1, + Mpi2ExpanderPage1_t, *pMpi2ExpanderPage1_t; + +#define MPI2_SASEXPANDER1_PAGEVERSION (0x02) + +/*use MPI2_SAS_PRATE_ defines for the ProgrammedLinkRate field */ + +/*use MPI2_SAS_HWRATE_ defines for the HwLinkRate field */ + +/*use MPI2_SAS_PHYINFO_ for the PhyInfo field */ + +/*see mpi2_sas.h for the MPI2_SAS_DEVICE_INFO_ defines + *used for the AttachedDeviceInfo field */ + +/*use MPI2_SAS_NEG_LINK_RATE_ defines for the NegotiatedLinkRate field */ + +/*values for SAS Expander Page 1 DiscoveryInfo field */ +#define MPI2_SAS_EXPANDER1_DISCINFO_BAD_PHY_DISABLED (0x04) +#define MPI2_SAS_EXPANDER1_DISCINFO_LINK_STATUS_CHANGE (0x02) +#define MPI2_SAS_EXPANDER1_DISCINFO_NO_ROUTING_ENTRIES (0x01) + +/*use MPI2_SAS_APHYINFO_ defines for AttachedPhyInfo field */ + + +/**************************************************************************** +* SAS Device Config Pages +****************************************************************************/ + +/*SAS Device Page 0 */ + +typedef struct _MPI2_CONFIG_PAGE_SAS_DEV_0 { + MPI2_CONFIG_EXTENDED_PAGE_HEADER + Header; /*0x00 */ + U16 + Slot; /*0x08 */ + U16 + EnclosureHandle; /*0x0A */ + U64 + SASAddress; /*0x0C */ + U16 + ParentDevHandle; /*0x14 */ + U8 + PhyNum; /*0x16 */ + U8 + AccessStatus; /*0x17 */ + U16 + DevHandle; /*0x18 */ + U8 + AttachedPhyIdentifier; /*0x1A */ + U8 + ZoneGroup; /*0x1B */ + U32 + DeviceInfo; /*0x1C */ + U16 + Flags; /*0x20 */ + U8 + PhysicalPort; /*0x22 */ + U8 + MaxPortConnections; /*0x23 */ + U64 + DeviceName; /*0x24 */ + U8 + PortGroups; /*0x2C */ + U8 + DmaGroup; /*0x2D */ + U8 + ControlGroup; /*0x2E */ + U8 + EnclosureLevel; /*0x2F */ + U32 + ConnectorName[4]; /*0x30 */ + U32 + Reserved3; /*0x34 */ +} MPI2_CONFIG_PAGE_SAS_DEV_0, + *PTR_MPI2_CONFIG_PAGE_SAS_DEV_0, + Mpi2SasDevicePage0_t, + *pMpi2SasDevicePage0_t; + +#define MPI2_SASDEVICE0_PAGEVERSION (0x09) + +/*values for SAS Device Page 0 AccessStatus field */ +#define MPI2_SAS_DEVICE0_ASTATUS_NO_ERRORS (0x00) +#define MPI2_SAS_DEVICE0_ASTATUS_SATA_INIT_FAILED (0x01) +#define MPI2_SAS_DEVICE0_ASTATUS_SATA_CAPABILITY_FAILED (0x02) +#define MPI2_SAS_DEVICE0_ASTATUS_SATA_AFFILIATION_CONFLICT (0x03) +#define MPI2_SAS_DEVICE0_ASTATUS_SATA_NEEDS_INITIALIZATION (0x04) +#define MPI2_SAS_DEVICE0_ASTATUS_ROUTE_NOT_ADDRESSABLE (0x05) +#define MPI2_SAS_DEVICE0_ASTATUS_SMP_ERROR_NOT_ADDRESSABLE (0x06) +#define MPI2_SAS_DEVICE0_ASTATUS_DEVICE_BLOCKED (0x07) +/*specific values for SATA Init failures */ +#define MPI2_SAS_DEVICE0_ASTATUS_SIF_UNKNOWN (0x10) +#define MPI2_SAS_DEVICE0_ASTATUS_SIF_AFFILIATION_CONFLICT (0x11) +#define MPI2_SAS_DEVICE0_ASTATUS_SIF_DIAG (0x12) +#define MPI2_SAS_DEVICE0_ASTATUS_SIF_IDENTIFICATION (0x13) +#define MPI2_SAS_DEVICE0_ASTATUS_SIF_CHECK_POWER (0x14) +#define MPI2_SAS_DEVICE0_ASTATUS_SIF_PIO_SN (0x15) +#define MPI2_SAS_DEVICE0_ASTATUS_SIF_MDMA_SN (0x16) +#define MPI2_SAS_DEVICE0_ASTATUS_SIF_UDMA_SN (0x17) +#define MPI2_SAS_DEVICE0_ASTATUS_SIF_ZONING_VIOLATION (0x18) +#define MPI2_SAS_DEVICE0_ASTATUS_SIF_NOT_ADDRESSABLE (0x19) +#define MPI2_SAS_DEVICE0_ASTATUS_SIF_MAX (0x1F) + +/*see mpi2_sas.h for values for SAS Device Page 0 DeviceInfo values */ + +/*values for SAS Device Page 0 Flags field */ +#define MPI2_SAS_DEVICE0_FLAGS_UNAUTHORIZED_DEVICE (0x8000) +#define MPI25_SAS_DEVICE0_FLAGS_ENABLED_FAST_PATH (0x4000) +#define MPI25_SAS_DEVICE0_FLAGS_FAST_PATH_CAPABLE (0x2000) +#define MPI2_SAS_DEVICE0_FLAGS_SLUMBER_PM_CAPABLE (0x1000) +#define MPI2_SAS_DEVICE0_FLAGS_PARTIAL_PM_CAPABLE (0x0800) +#define MPI2_SAS_DEVICE0_FLAGS_SATA_ASYNCHRONOUS_NOTIFY (0x0400) +#define MPI2_SAS_DEVICE0_FLAGS_SATA_SW_PRESERVE (0x0200) +#define MPI2_SAS_DEVICE0_FLAGS_UNSUPPORTED_DEVICE (0x0100) +#define MPI2_SAS_DEVICE0_FLAGS_SATA_48BIT_LBA_SUPPORTED (0x0080) +#define MPI2_SAS_DEVICE0_FLAGS_SATA_SMART_SUPPORTED (0x0040) +#define MPI2_SAS_DEVICE0_FLAGS_SATA_NCQ_SUPPORTED (0x0020) +#define MPI2_SAS_DEVICE0_FLAGS_SATA_FUA_SUPPORTED (0x0010) +#define MPI2_SAS_DEVICE0_FLAGS_PORT_SELECTOR_ATTACH (0x0008) +#define MPI2_SAS_DEVICE0_FLAGS_PERSIST_CAPABLE (0x0004) +#define MPI2_SAS_DEVICE0_FLAGS_ENCL_LEVEL_VALID (0x0002) +#define MPI2_SAS_DEVICE0_FLAGS_DEVICE_PRESENT (0x0001) + + +/*SAS Device Page 1 */ + +typedef struct _MPI2_CONFIG_PAGE_SAS_DEV_1 { + MPI2_CONFIG_EXTENDED_PAGE_HEADER + Header; /*0x00 */ + U32 + Reserved1; /*0x08 */ + U64 + SASAddress; /*0x0C */ + U32 + Reserved2; /*0x14 */ + U16 + DevHandle; /*0x18 */ + U16 + Reserved3; /*0x1A */ + U8 + InitialRegDeviceFIS[20];/*0x1C */ +} MPI2_CONFIG_PAGE_SAS_DEV_1, + *PTR_MPI2_CONFIG_PAGE_SAS_DEV_1, + Mpi2SasDevicePage1_t, + *pMpi2SasDevicePage1_t; + +#define MPI2_SASDEVICE1_PAGEVERSION (0x01) + + +/**************************************************************************** +* SAS PHY Config Pages +****************************************************************************/ + +/*SAS PHY Page 0 */ + +typedef struct _MPI2_CONFIG_PAGE_SAS_PHY_0 { + MPI2_CONFIG_EXTENDED_PAGE_HEADER + Header; /*0x00 */ + U16 + OwnerDevHandle; /*0x08 */ + U16 + Reserved1; /*0x0A */ + U16 + AttachedDevHandle; /*0x0C */ + U8 + AttachedPhyIdentifier; /*0x0E */ + U8 + Reserved2; /*0x0F */ + U32 + AttachedPhyInfo; /*0x10 */ + U8 + ProgrammedLinkRate; /*0x14 */ + U8 + HwLinkRate; /*0x15 */ + U8 + ChangeCount; /*0x16 */ + U8 + Flags; /*0x17 */ + U32 + PhyInfo; /*0x18 */ + U8 + NegotiatedLinkRate; /*0x1C */ + U8 + Reserved3; /*0x1D */ + U16 + Reserved4; /*0x1E */ +} MPI2_CONFIG_PAGE_SAS_PHY_0, + *PTR_MPI2_CONFIG_PAGE_SAS_PHY_0, + Mpi2SasPhyPage0_t, *pMpi2SasPhyPage0_t; + +#define MPI2_SASPHY0_PAGEVERSION (0x03) + +/*use MPI2_SAS_APHYINFO_ defines for AttachedPhyInfo field */ + +/*use MPI2_SAS_PRATE_ defines for the ProgrammedLinkRate field */ + +/*use MPI2_SAS_HWRATE_ defines for the HwLinkRate field */ + +/*values for SAS PHY Page 0 Flags field */ +#define MPI2_SAS_PHY0_FLAGS_SGPIO_DIRECT_ATTACH_ENC (0x01) + +/*use MPI2_SAS_PHYINFO_ for the PhyInfo field */ + +/*use MPI2_SAS_NEG_LINK_RATE_ defines for the NegotiatedLinkRate field */ + + +/*SAS PHY Page 1 */ + +typedef struct _MPI2_CONFIG_PAGE_SAS_PHY_1 { + MPI2_CONFIG_EXTENDED_PAGE_HEADER + Header; /*0x00 */ + U32 + Reserved1; /*0x08 */ + U32 + InvalidDwordCount; /*0x0C */ + U32 + RunningDisparityErrorCount; /*0x10 */ + U32 + LossDwordSynchCount; /*0x14 */ + U32 + PhyResetProblemCount; /*0x18 */ +} MPI2_CONFIG_PAGE_SAS_PHY_1, + *PTR_MPI2_CONFIG_PAGE_SAS_PHY_1, + Mpi2SasPhyPage1_t, *pMpi2SasPhyPage1_t; + +#define MPI2_SASPHY1_PAGEVERSION (0x01) + + +/*SAS PHY Page 2 */ + +typedef struct _MPI2_SASPHY2_PHY_EVENT { + U8 PhyEventCode; /*0x00 */ + U8 Reserved1; /*0x01 */ + U16 Reserved2; /*0x02 */ + U32 PhyEventInfo; /*0x04 */ +} MPI2_SASPHY2_PHY_EVENT, *PTR_MPI2_SASPHY2_PHY_EVENT, + Mpi2SasPhy2PhyEvent_t, *pMpi2SasPhy2PhyEvent_t; + +/*use MPI2_SASPHY3_EVENT_CODE_ for the PhyEventCode field */ + + +/* + *Host code (drivers, BIOS, utilities, etc.) should leave this define set to + *one and check the value returned for NumPhyEvents at runtime. + */ +#ifndef MPI2_SASPHY2_PHY_EVENT_MAX +#define MPI2_SASPHY2_PHY_EVENT_MAX (1) +#endif + +typedef struct _MPI2_CONFIG_PAGE_SAS_PHY_2 { + MPI2_CONFIG_EXTENDED_PAGE_HEADER + Header; /*0x00 */ + U32 + Reserved1; /*0x08 */ + U8 + NumPhyEvents; /*0x0C */ + U8 + Reserved2; /*0x0D */ + U16 + Reserved3; /*0x0E */ + MPI2_SASPHY2_PHY_EVENT + PhyEvent[MPI2_SASPHY2_PHY_EVENT_MAX]; /*0x10 */ +} MPI2_CONFIG_PAGE_SAS_PHY_2, + *PTR_MPI2_CONFIG_PAGE_SAS_PHY_2, + Mpi2SasPhyPage2_t, + *pMpi2SasPhyPage2_t; + +#define MPI2_SASPHY2_PAGEVERSION (0x00) + + +/*SAS PHY Page 3 */ + +typedef struct _MPI2_SASPHY3_PHY_EVENT_CONFIG { + U8 PhyEventCode; /*0x00 */ + U8 Reserved1; /*0x01 */ + U16 Reserved2; /*0x02 */ + U8 CounterType; /*0x04 */ + U8 ThresholdWindow; /*0x05 */ + U8 TimeUnits; /*0x06 */ + U8 Reserved3; /*0x07 */ + U32 EventThreshold; /*0x08 */ + U16 ThresholdFlags; /*0x0C */ + U16 Reserved4; /*0x0E */ +} MPI2_SASPHY3_PHY_EVENT_CONFIG, + *PTR_MPI2_SASPHY3_PHY_EVENT_CONFIG, + Mpi2SasPhy3PhyEventConfig_t, + *pMpi2SasPhy3PhyEventConfig_t; + +/*values for PhyEventCode field */ +#define MPI2_SASPHY3_EVENT_CODE_NO_EVENT (0x00) +#define MPI2_SASPHY3_EVENT_CODE_INVALID_DWORD (0x01) +#define MPI2_SASPHY3_EVENT_CODE_RUNNING_DISPARITY_ERROR (0x02) +#define MPI2_SASPHY3_EVENT_CODE_LOSS_DWORD_SYNC (0x03) +#define MPI2_SASPHY3_EVENT_CODE_PHY_RESET_PROBLEM (0x04) +#define MPI2_SASPHY3_EVENT_CODE_ELASTICITY_BUF_OVERFLOW (0x05) +#define MPI2_SASPHY3_EVENT_CODE_RX_ERROR (0x06) +#define MPI2_SASPHY3_EVENT_CODE_RX_ADDR_FRAME_ERROR (0x20) +#define MPI2_SASPHY3_EVENT_CODE_TX_AC_OPEN_REJECT (0x21) +#define MPI2_SASPHY3_EVENT_CODE_RX_AC_OPEN_REJECT (0x22) +#define MPI2_SASPHY3_EVENT_CODE_TX_RC_OPEN_REJECT (0x23) +#define MPI2_SASPHY3_EVENT_CODE_RX_RC_OPEN_REJECT (0x24) +#define MPI2_SASPHY3_EVENT_CODE_RX_AIP_PARTIAL_WAITING_ON (0x25) +#define MPI2_SASPHY3_EVENT_CODE_RX_AIP_CONNECT_WAITING_ON (0x26) +#define MPI2_SASPHY3_EVENT_CODE_TX_BREAK (0x27) +#define MPI2_SASPHY3_EVENT_CODE_RX_BREAK (0x28) +#define MPI2_SASPHY3_EVENT_CODE_BREAK_TIMEOUT (0x29) +#define MPI2_SASPHY3_EVENT_CODE_CONNECTION (0x2A) +#define MPI2_SASPHY3_EVENT_CODE_PEAKTX_PATHWAY_BLOCKED (0x2B) +#define MPI2_SASPHY3_EVENT_CODE_PEAKTX_ARB_WAIT_TIME (0x2C) +#define MPI2_SASPHY3_EVENT_CODE_PEAK_ARB_WAIT_TIME (0x2D) +#define MPI2_SASPHY3_EVENT_CODE_PEAK_CONNECT_TIME (0x2E) +#define MPI2_SASPHY3_EVENT_CODE_TX_SSP_FRAMES (0x40) +#define MPI2_SASPHY3_EVENT_CODE_RX_SSP_FRAMES (0x41) +#define MPI2_SASPHY3_EVENT_CODE_TX_SSP_ERROR_FRAMES (0x42) +#define MPI2_SASPHY3_EVENT_CODE_RX_SSP_ERROR_FRAMES (0x43) +#define MPI2_SASPHY3_EVENT_CODE_TX_CREDIT_BLOCKED (0x44) +#define MPI2_SASPHY3_EVENT_CODE_RX_CREDIT_BLOCKED (0x45) +#define MPI2_SASPHY3_EVENT_CODE_TX_SATA_FRAMES (0x50) +#define MPI2_SASPHY3_EVENT_CODE_RX_SATA_FRAMES (0x51) +#define MPI2_SASPHY3_EVENT_CODE_SATA_OVERFLOW (0x52) +#define MPI2_SASPHY3_EVENT_CODE_TX_SMP_FRAMES (0x60) +#define MPI2_SASPHY3_EVENT_CODE_RX_SMP_FRAMES (0x61) +#define MPI2_SASPHY3_EVENT_CODE_RX_SMP_ERROR_FRAMES (0x63) +#define MPI2_SASPHY3_EVENT_CODE_HOTPLUG_TIMEOUT (0xD0) +#define MPI2_SASPHY3_EVENT_CODE_MISALIGNED_MUX_PRIMITIVE (0xD1) +#define MPI2_SASPHY3_EVENT_CODE_RX_AIP (0xD2) + +/*Following codes are product specific and in MPI v2.6 and later */ +#define MPI2_SASPHY3_EVENT_CODE_LCARB_WAIT_TIME (0xD3) +#define MPI2_SASPHY3_EVENT_CODE_RCVD_CONN_RESP_WAIT_TIME (0xD4) +#define MPI2_SASPHY3_EVENT_CODE_LCCONN_TIME (0xD5) +#define MPI2_SASPHY3_EVENT_CODE_SSP_TX_START_TRANSMIT (0xD6) +#define MPI2_SASPHY3_EVENT_CODE_SATA_TX_START (0xD7) +#define MPI2_SASPHY3_EVENT_CODE_SMP_TX_START_TRANSMT (0xD8) +#define MPI2_SASPHY3_EVENT_CODE_TX_SMP_BREAK_CONN (0xD9) +#define MPI2_SASPHY3_EVENT_CODE_SSP_RX_START_RECEIVE (0xDA) +#define MPI2_SASPHY3_EVENT_CODE_SATA_RX_START_RECEIVE (0xDB) +#define MPI2_SASPHY3_EVENT_CODE_SMP_RX_START_RECEIVE (0xDC) + + +/*values for the CounterType field */ +#define MPI2_SASPHY3_COUNTER_TYPE_WRAPPING (0x00) +#define MPI2_SASPHY3_COUNTER_TYPE_SATURATING (0x01) +#define MPI2_SASPHY3_COUNTER_TYPE_PEAK_VALUE (0x02) + +/*values for the TimeUnits field */ +#define MPI2_SASPHY3_TIME_UNITS_10_MICROSECONDS (0x00) +#define MPI2_SASPHY3_TIME_UNITS_100_MICROSECONDS (0x01) +#define MPI2_SASPHY3_TIME_UNITS_1_MILLISECOND (0x02) +#define MPI2_SASPHY3_TIME_UNITS_10_MILLISECONDS (0x03) + +/*values for the ThresholdFlags field */ +#define MPI2_SASPHY3_TFLAGS_PHY_RESET (0x0002) +#define MPI2_SASPHY3_TFLAGS_EVENT_NOTIFY (0x0001) + +/* + *Host code (drivers, BIOS, utilities, etc.) should leave this define set to + *one and check the value returned for NumPhyEvents at runtime. + */ +#ifndef MPI2_SASPHY3_PHY_EVENT_MAX +#define MPI2_SASPHY3_PHY_EVENT_MAX (1) +#endif + +typedef struct _MPI2_CONFIG_PAGE_SAS_PHY_3 { + MPI2_CONFIG_EXTENDED_PAGE_HEADER + Header; /*0x00 */ + U32 + Reserved1; /*0x08 */ + U8 + NumPhyEvents; /*0x0C */ + U8 + Reserved2; /*0x0D */ + U16 + Reserved3; /*0x0E */ + MPI2_SASPHY3_PHY_EVENT_CONFIG + PhyEventConfig[MPI2_SASPHY3_PHY_EVENT_MAX]; /*0x10 */ +} MPI2_CONFIG_PAGE_SAS_PHY_3, + *PTR_MPI2_CONFIG_PAGE_SAS_PHY_3, + Mpi2SasPhyPage3_t, *pMpi2SasPhyPage3_t; + +#define MPI2_SASPHY3_PAGEVERSION (0x00) + + +/*SAS PHY Page 4 */ + +typedef struct _MPI2_CONFIG_PAGE_SAS_PHY_4 { + MPI2_CONFIG_EXTENDED_PAGE_HEADER + Header; /*0x00 */ + U16 + Reserved1; /*0x08 */ + U8 + Reserved2; /*0x0A */ + U8 + Flags; /*0x0B */ + U8 + InitialFrame[28]; /*0x0C */ +} MPI2_CONFIG_PAGE_SAS_PHY_4, + *PTR_MPI2_CONFIG_PAGE_SAS_PHY_4, + Mpi2SasPhyPage4_t, *pMpi2SasPhyPage4_t; + +#define MPI2_SASPHY4_PAGEVERSION (0x00) + +/*values for the Flags field */ +#define MPI2_SASPHY4_FLAGS_FRAME_VALID (0x02) +#define MPI2_SASPHY4_FLAGS_SATA_FRAME (0x01) + + + + +/**************************************************************************** +* SAS Port Config Pages +****************************************************************************/ + +/*SAS Port Page 0 */ + +typedef struct _MPI2_CONFIG_PAGE_SAS_PORT_0 { + MPI2_CONFIG_EXTENDED_PAGE_HEADER + Header; /*0x00 */ + U8 + PortNumber; /*0x08 */ + U8 + PhysicalPort; /*0x09 */ + U8 + PortWidth; /*0x0A */ + U8 + PhysicalPortWidth; /*0x0B */ + U8 + ZoneGroup; /*0x0C */ + U8 + Reserved1; /*0x0D */ + U16 + Reserved2; /*0x0E */ + U64 + SASAddress; /*0x10 */ + U32 + DeviceInfo; /*0x18 */ + U32 + Reserved3; /*0x1C */ + U32 + Reserved4; /*0x20 */ +} MPI2_CONFIG_PAGE_SAS_PORT_0, + *PTR_MPI2_CONFIG_PAGE_SAS_PORT_0, + Mpi2SasPortPage0_t, *pMpi2SasPortPage0_t; + +#define MPI2_SASPORT0_PAGEVERSION (0x00) + +/*see mpi2_sas.h for values for SAS Port Page 0 DeviceInfo values */ + + +/**************************************************************************** +* SAS Enclosure Config Pages +****************************************************************************/ + +/*SAS Enclosure Page 0 */ + +typedef struct _MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0 { + MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /*0x00 */ + U32 Reserved1; /*0x08 */ + U64 EnclosureLogicalID; /*0x0C */ + U16 Flags; /*0x14 */ + U16 EnclosureHandle; /*0x16 */ + U16 NumSlots; /*0x18 */ + U16 StartSlot; /*0x1A */ + U8 ChassisSlot; /*0x1C */ + U8 EnclosureLeve; /*0x1D */ + U16 SEPDevHandle; /*0x1E */ + U32 Reserved3; /*0x20 */ + U32 Reserved4; /*0x24 */ +} MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0, + *PTR_MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0, + Mpi2SasEnclosurePage0_t, *pMpi2SasEnclosurePage0_t, + MPI26_CONFIG_PAGE_ENCLOSURE_0, + *PTR_MPI26_CONFIG_PAGE_ENCLOSURE_0, + Mpi26EnclosurePage0_t, *pMpi26EnclosurePage0_t; + +#define MPI2_SASENCLOSURE0_PAGEVERSION (0x04) + +/*values for SAS Enclosure Page 0 Flags field */ +#define MPI2_SAS_ENCLS0_FLAGS_CHASSIS_SLOT_VALID (0x0020) +#define MPI2_SAS_ENCLS0_FLAGS_ENCL_LEVEL_VALID (0x0010) +#define MPI2_SAS_ENCLS0_FLAGS_MNG_MASK (0x000F) +#define MPI2_SAS_ENCLS0_FLAGS_MNG_UNKNOWN (0x0000) +#define MPI2_SAS_ENCLS0_FLAGS_MNG_IOC_SES (0x0001) +#define MPI2_SAS_ENCLS0_FLAGS_MNG_IOC_SGPIO (0x0002) +#define MPI2_SAS_ENCLS0_FLAGS_MNG_EXP_SGPIO (0x0003) +#define MPI2_SAS_ENCLS0_FLAGS_MNG_SES_ENCLOSURE (0x0004) +#define MPI2_SAS_ENCLS0_FLAGS_MNG_IOC_GPIO (0x0005) + +#define MPI26_ENCLOSURE0_PAGEVERSION (0x04) + +/*Values for Enclosure Page 0 Flags field */ +#define MPI26_ENCLS0_FLAGS_CHASSIS_SLOT_VALID (0x0020) +#define MPI26_ENCLS0_FLAGS_ENCL_LEVEL_VALID (0x0010) +#define MPI26_ENCLS0_FLAGS_MNG_MASK (0x000F) +#define MPI26_ENCLS0_FLAGS_MNG_UNKNOWN (0x0000) +#define MPI26_ENCLS0_FLAGS_MNG_IOC_SES (0x0001) +#define MPI26_ENCLS0_FLAGS_MNG_IOC_SGPIO (0x0002) +#define MPI26_ENCLS0_FLAGS_MNG_EXP_SGPIO (0x0003) +#define MPI26_ENCLS0_FLAGS_MNG_SES_ENCLOSURE (0x0004) +#define MPI26_ENCLS0_FLAGS_MNG_IOC_GPIO (0x0005) + +/**************************************************************************** +* Log Config Page +****************************************************************************/ + +/*Log Page 0 */ + +/* + *Host code (drivers, BIOS, utilities, etc.) should leave this define set to + *one and check the value returned for NumLogEntries at runtime. + */ +#ifndef MPI2_LOG_0_NUM_LOG_ENTRIES +#define MPI2_LOG_0_NUM_LOG_ENTRIES (1) +#endif + +#define MPI2_LOG_0_LOG_DATA_LENGTH (0x1C) + +typedef struct _MPI2_LOG_0_ENTRY { + U64 TimeStamp; /*0x00 */ + U32 Reserved1; /*0x08 */ + U16 LogSequence; /*0x0C */ + U16 LogEntryQualifier; /*0x0E */ + U8 VP_ID; /*0x10 */ + U8 VF_ID; /*0x11 */ + U16 Reserved2; /*0x12 */ + U8 + LogData[MPI2_LOG_0_LOG_DATA_LENGTH];/*0x14 */ +} MPI2_LOG_0_ENTRY, *PTR_MPI2_LOG_0_ENTRY, + Mpi2Log0Entry_t, *pMpi2Log0Entry_t; + +/*values for Log Page 0 LogEntry LogEntryQualifier field */ +#define MPI2_LOG_0_ENTRY_QUAL_ENTRY_UNUSED (0x0000) +#define MPI2_LOG_0_ENTRY_QUAL_POWER_ON_RESET (0x0001) +#define MPI2_LOG_0_ENTRY_QUAL_TIMESTAMP_UPDATE (0x0002) +#define MPI2_LOG_0_ENTRY_QUAL_MIN_IMPLEMENT_SPEC (0x8000) +#define MPI2_LOG_0_ENTRY_QUAL_MAX_IMPLEMENT_SPEC (0xFFFF) + +typedef struct _MPI2_CONFIG_PAGE_LOG_0 { + MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /*0x00 */ + U32 Reserved1; /*0x08 */ + U32 Reserved2; /*0x0C */ + U16 NumLogEntries;/*0x10 */ + U16 Reserved3; /*0x12 */ + MPI2_LOG_0_ENTRY + LogEntry[MPI2_LOG_0_NUM_LOG_ENTRIES]; /*0x14 */ +} MPI2_CONFIG_PAGE_LOG_0, *PTR_MPI2_CONFIG_PAGE_LOG_0, + Mpi2LogPage0_t, *pMpi2LogPage0_t; + +#define MPI2_LOG_0_PAGEVERSION (0x02) + + +/**************************************************************************** +* RAID Config Page +****************************************************************************/ + +/*RAID Page 0 */ + +/* + *Host code (drivers, BIOS, utilities, etc.) should leave this define set to + *one and check the value returned for NumElements at runtime. + */ +#ifndef MPI2_RAIDCONFIG0_MAX_ELEMENTS +#define MPI2_RAIDCONFIG0_MAX_ELEMENTS (1) +#endif + +typedef struct _MPI2_RAIDCONFIG0_CONFIG_ELEMENT { + U16 ElementFlags; /*0x00 */ + U16 VolDevHandle; /*0x02 */ + U8 HotSparePool; /*0x04 */ + U8 PhysDiskNum; /*0x05 */ + U16 PhysDiskDevHandle; /*0x06 */ +} MPI2_RAIDCONFIG0_CONFIG_ELEMENT, + *PTR_MPI2_RAIDCONFIG0_CONFIG_ELEMENT, + Mpi2RaidConfig0ConfigElement_t, + *pMpi2RaidConfig0ConfigElement_t; + +/*values for the ElementFlags field */ +#define MPI2_RAIDCONFIG0_EFLAGS_MASK_ELEMENT_TYPE (0x000F) +#define MPI2_RAIDCONFIG0_EFLAGS_VOLUME_ELEMENT (0x0000) +#define MPI2_RAIDCONFIG0_EFLAGS_VOL_PHYS_DISK_ELEMENT (0x0001) +#define MPI2_RAIDCONFIG0_EFLAGS_HOT_SPARE_ELEMENT (0x0002) +#define MPI2_RAIDCONFIG0_EFLAGS_OCE_ELEMENT (0x0003) + + +typedef struct _MPI2_CONFIG_PAGE_RAID_CONFIGURATION_0 { + MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /*0x00 */ + U8 NumHotSpares; /*0x08 */ + U8 NumPhysDisks; /*0x09 */ + U8 NumVolumes; /*0x0A */ + U8 ConfigNum; /*0x0B */ + U32 Flags; /*0x0C */ + U8 ConfigGUID[24]; /*0x10 */ + U32 Reserved1; /*0x28 */ + U8 NumElements; /*0x2C */ + U8 Reserved2; /*0x2D */ + U16 Reserved3; /*0x2E */ + MPI2_RAIDCONFIG0_CONFIG_ELEMENT + ConfigElement[MPI2_RAIDCONFIG0_MAX_ELEMENTS]; /*0x30 */ +} MPI2_CONFIG_PAGE_RAID_CONFIGURATION_0, + *PTR_MPI2_CONFIG_PAGE_RAID_CONFIGURATION_0, + Mpi2RaidConfigurationPage0_t, + *pMpi2RaidConfigurationPage0_t; + +#define MPI2_RAIDCONFIG0_PAGEVERSION (0x00) + +/*values for RAID Configuration Page 0 Flags field */ +#define MPI2_RAIDCONFIG0_FLAG_FOREIGN_CONFIG (0x00000001) + + +/**************************************************************************** +* Driver Persistent Mapping Config Pages +****************************************************************************/ + +/*Driver Persistent Mapping Page 0 */ + +typedef struct _MPI2_CONFIG_PAGE_DRIVER_MAP0_ENTRY { + U64 PhysicalIdentifier; /*0x00 */ + U16 MappingInformation; /*0x08 */ + U16 DeviceIndex; /*0x0A */ + U32 PhysicalBitsMapping; /*0x0C */ + U32 Reserved1; /*0x10 */ +} MPI2_CONFIG_PAGE_DRIVER_MAP0_ENTRY, + *PTR_MPI2_CONFIG_PAGE_DRIVER_MAP0_ENTRY, + Mpi2DriverMap0Entry_t, *pMpi2DriverMap0Entry_t; + +typedef struct _MPI2_CONFIG_PAGE_DRIVER_MAPPING_0 { + MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /*0x00 */ + MPI2_CONFIG_PAGE_DRIVER_MAP0_ENTRY Entry; /*0x08 */ +} MPI2_CONFIG_PAGE_DRIVER_MAPPING_0, + *PTR_MPI2_CONFIG_PAGE_DRIVER_MAPPING_0, + Mpi2DriverMappingPage0_t, *pMpi2DriverMappingPage0_t; + +#define MPI2_DRIVERMAPPING0_PAGEVERSION (0x00) + +/*values for Driver Persistent Mapping Page 0 MappingInformation field */ +#define MPI2_DRVMAP0_MAPINFO_SLOT_MASK (0x07F0) +#define MPI2_DRVMAP0_MAPINFO_SLOT_SHIFT (4) +#define MPI2_DRVMAP0_MAPINFO_MISSING_MASK (0x000F) + + +/**************************************************************************** +* Ethernet Config Pages +****************************************************************************/ + +/*Ethernet Page 0 */ + +/*IP address (union of IPv4 and IPv6) */ +typedef union _MPI2_ETHERNET_IP_ADDR { + U32 IPv4Addr; + U32 IPv6Addr[4]; +} MPI2_ETHERNET_IP_ADDR, *PTR_MPI2_ETHERNET_IP_ADDR, + Mpi2EthernetIpAddr_t, *pMpi2EthernetIpAddr_t; + +#define MPI2_ETHERNET_HOST_NAME_LENGTH (32) + +typedef struct _MPI2_CONFIG_PAGE_ETHERNET_0 { + MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /*0x00 */ + U8 NumInterfaces; /*0x08 */ + U8 Reserved0; /*0x09 */ + U16 Reserved1; /*0x0A */ + U32 Status; /*0x0C */ + U8 MediaState; /*0x10 */ + U8 Reserved2; /*0x11 */ + U16 Reserved3; /*0x12 */ + U8 MacAddress[6]; /*0x14 */ + U8 Reserved4; /*0x1A */ + U8 Reserved5; /*0x1B */ + MPI2_ETHERNET_IP_ADDR IpAddress; /*0x1C */ + MPI2_ETHERNET_IP_ADDR SubnetMask; /*0x2C */ + MPI2_ETHERNET_IP_ADDR GatewayIpAddress;/*0x3C */ + MPI2_ETHERNET_IP_ADDR DNS1IpAddress; /*0x4C */ + MPI2_ETHERNET_IP_ADDR DNS2IpAddress; /*0x5C */ + MPI2_ETHERNET_IP_ADDR DhcpIpAddress; /*0x6C */ + U8 + HostName[MPI2_ETHERNET_HOST_NAME_LENGTH];/*0x7C */ +} MPI2_CONFIG_PAGE_ETHERNET_0, + *PTR_MPI2_CONFIG_PAGE_ETHERNET_0, + Mpi2EthernetPage0_t, *pMpi2EthernetPage0_t; + +#define MPI2_ETHERNETPAGE0_PAGEVERSION (0x00) + +/*values for Ethernet Page 0 Status field */ +#define MPI2_ETHPG0_STATUS_IPV6_CAPABLE (0x80000000) +#define MPI2_ETHPG0_STATUS_IPV4_CAPABLE (0x40000000) +#define MPI2_ETHPG0_STATUS_CONSOLE_CONNECTED (0x20000000) +#define MPI2_ETHPG0_STATUS_DEFAULT_IF (0x00000100) +#define MPI2_ETHPG0_STATUS_FW_DWNLD_ENABLED (0x00000080) +#define MPI2_ETHPG0_STATUS_TELNET_ENABLED (0x00000040) +#define MPI2_ETHPG0_STATUS_SSH2_ENABLED (0x00000020) +#define MPI2_ETHPG0_STATUS_DHCP_CLIENT_ENABLED (0x00000010) +#define MPI2_ETHPG0_STATUS_IPV6_ENABLED (0x00000008) +#define MPI2_ETHPG0_STATUS_IPV4_ENABLED (0x00000004) +#define MPI2_ETHPG0_STATUS_IPV6_ADDRESSES (0x00000002) +#define MPI2_ETHPG0_STATUS_ETH_IF_ENABLED (0x00000001) + +/*values for Ethernet Page 0 MediaState field */ +#define MPI2_ETHPG0_MS_DUPLEX_MASK (0x80) +#define MPI2_ETHPG0_MS_HALF_DUPLEX (0x00) +#define MPI2_ETHPG0_MS_FULL_DUPLEX (0x80) + +#define MPI2_ETHPG0_MS_CONNECT_SPEED_MASK (0x07) +#define MPI2_ETHPG0_MS_NOT_CONNECTED (0x00) +#define MPI2_ETHPG0_MS_10MBIT (0x01) +#define MPI2_ETHPG0_MS_100MBIT (0x02) +#define MPI2_ETHPG0_MS_1GBIT (0x03) + + +/*Ethernet Page 1 */ + +typedef struct _MPI2_CONFIG_PAGE_ETHERNET_1 { + MPI2_CONFIG_EXTENDED_PAGE_HEADER + Header; /*0x00 */ + U32 + Reserved0; /*0x08 */ + U32 + Flags; /*0x0C */ + U8 + MediaState; /*0x10 */ + U8 + Reserved1; /*0x11 */ + U16 + Reserved2; /*0x12 */ + U8 + MacAddress[6]; /*0x14 */ + U8 + Reserved3; /*0x1A */ + U8 + Reserved4; /*0x1B */ + MPI2_ETHERNET_IP_ADDR + StaticIpAddress; /*0x1C */ + MPI2_ETHERNET_IP_ADDR + StaticSubnetMask; /*0x2C */ + MPI2_ETHERNET_IP_ADDR + StaticGatewayIpAddress; /*0x3C */ + MPI2_ETHERNET_IP_ADDR + StaticDNS1IpAddress; /*0x4C */ + MPI2_ETHERNET_IP_ADDR + StaticDNS2IpAddress; /*0x5C */ + U32 + Reserved5; /*0x6C */ + U32 + Reserved6; /*0x70 */ + U32 + Reserved7; /*0x74 */ + U32 + Reserved8; /*0x78 */ + U8 + HostName[MPI2_ETHERNET_HOST_NAME_LENGTH];/*0x7C */ +} MPI2_CONFIG_PAGE_ETHERNET_1, + *PTR_MPI2_CONFIG_PAGE_ETHERNET_1, + Mpi2EthernetPage1_t, *pMpi2EthernetPage1_t; + +#define MPI2_ETHERNETPAGE1_PAGEVERSION (0x00) + +/*values for Ethernet Page 1 Flags field */ +#define MPI2_ETHPG1_FLAG_SET_DEFAULT_IF (0x00000100) +#define MPI2_ETHPG1_FLAG_ENABLE_FW_DOWNLOAD (0x00000080) +#define MPI2_ETHPG1_FLAG_ENABLE_TELNET (0x00000040) +#define MPI2_ETHPG1_FLAG_ENABLE_SSH2 (0x00000020) +#define MPI2_ETHPG1_FLAG_ENABLE_DHCP_CLIENT (0x00000010) +#define MPI2_ETHPG1_FLAG_ENABLE_IPV6 (0x00000008) +#define MPI2_ETHPG1_FLAG_ENABLE_IPV4 (0x00000004) +#define MPI2_ETHPG1_FLAG_USE_IPV6_ADDRESSES (0x00000002) +#define MPI2_ETHPG1_FLAG_ENABLE_ETH_IF (0x00000001) + +/*values for Ethernet Page 1 MediaState field */ +#define MPI2_ETHPG1_MS_DUPLEX_MASK (0x80) +#define MPI2_ETHPG1_MS_HALF_DUPLEX (0x00) +#define MPI2_ETHPG1_MS_FULL_DUPLEX (0x80) + +#define MPI2_ETHPG1_MS_DATA_RATE_MASK (0x07) +#define MPI2_ETHPG1_MS_DATA_RATE_AUTO (0x00) +#define MPI2_ETHPG1_MS_DATA_RATE_10MBIT (0x01) +#define MPI2_ETHPG1_MS_DATA_RATE_100MBIT (0x02) +#define MPI2_ETHPG1_MS_DATA_RATE_1GBIT (0x03) + + +/**************************************************************************** +* Extended Manufacturing Config Pages +****************************************************************************/ + +/* + *Generic structure to use for product-specific extended manufacturing pages + *(currently Extended Manufacturing Page 40 through Extended Manufacturing + *Page 60). + */ + +typedef struct _MPI2_CONFIG_PAGE_EXT_MAN_PS { + MPI2_CONFIG_EXTENDED_PAGE_HEADER + Header; /*0x00 */ + U32 + ProductSpecificInfo; /*0x08 */ +} MPI2_CONFIG_PAGE_EXT_MAN_PS, + *PTR_MPI2_CONFIG_PAGE_EXT_MAN_PS, + Mpi2ExtManufacturingPagePS_t, + *pMpi2ExtManufacturingPagePS_t; + +/*PageVersion should be provided by product-specific code */ + + + +/**************************************************************************** +* values for fields used by several types of PCIe Config Pages +****************************************************************************/ + +/*values for NegotiatedLinkRates fields */ +#define MPI26_PCIE_NEG_LINK_RATE_MASK_PHYSICAL (0x0F) +/*link rates used for Negotiated Physical Link Rate */ +#define MPI26_PCIE_NEG_LINK_RATE_UNKNOWN (0x00) +#define MPI26_PCIE_NEG_LINK_RATE_PHY_DISABLED (0x01) +#define MPI26_PCIE_NEG_LINK_RATE_2_5 (0x02) +#define MPI26_PCIE_NEG_LINK_RATE_5_0 (0x03) +#define MPI26_PCIE_NEG_LINK_RATE_8_0 (0x04) +#define MPI26_PCIE_NEG_LINK_RATE_16_0 (0x05) + + +/**************************************************************************** +* PCIe IO Unit Config Pages (MPI v2.6 and later) +****************************************************************************/ + +/*PCIe IO Unit Page 0 */ + +typedef struct _MPI26_PCIE_IO_UNIT0_PHY_DATA { + U8 Link; /*0x00 */ + U8 LinkFlags; /*0x01 */ + U8 PhyFlags; /*0x02 */ + U8 NegotiatedLinkRate; /*0x03 */ + U32 ControllerPhyDeviceInfo;/*0x04 */ + U16 AttachedDevHandle; /*0x08 */ + U16 ControllerDevHandle; /*0x0A */ + U32 EnumerationStatus; /*0x0C */ + U32 Reserved1; /*0x10 */ +} MPI26_PCIE_IO_UNIT0_PHY_DATA, + *PTR_MPI26_PCIE_IO_UNIT0_PHY_DATA, + Mpi26PCIeIOUnit0PhyData_t, *pMpi26PCIeIOUnit0PhyData_t; + +/* + *Host code (drivers, BIOS, utilities, etc.) should leave this define set to + *one and check the value returned for NumPhys at runtime. + */ +#ifndef MPI26_PCIE_IOUNIT0_PHY_MAX +#define MPI26_PCIE_IOUNIT0_PHY_MAX (1) +#endif + +typedef struct _MPI26_CONFIG_PAGE_PIOUNIT_0 { + MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /*0x00 */ + U32 Reserved1; /*0x08 */ + U8 NumPhys; /*0x0C */ + U8 InitStatus; /*0x0D */ + U16 Reserved3; /*0x0E */ + MPI26_PCIE_IO_UNIT0_PHY_DATA + PhyData[MPI26_PCIE_IOUNIT0_PHY_MAX]; /*0x10 */ +} MPI26_CONFIG_PAGE_PIOUNIT_0, + *PTR_MPI26_CONFIG_PAGE_PIOUNIT_0, + Mpi26PCIeIOUnitPage0_t, *pMpi26PCIeIOUnitPage0_t; + +#define MPI26_PCIEIOUNITPAGE0_PAGEVERSION (0x00) + +/*values for PCIe IO Unit Page 0 LinkFlags */ +#define MPI26_PCIEIOUNIT0_LINKFLAGS_ENUMERATION_IN_PROGRESS (0x08) + +/*values for PCIe IO Unit Page 0 PhyFlags */ +#define MPI26_PCIEIOUNIT0_PHYFLAGS_PHY_DISABLED (0x08) + +/*use MPI26_PCIE_NEG_LINK_RATE_ defines for the NegotiatedLinkRate field */ + +/*see mpi2_pci.h for values for PCIe IO Unit Page 0 ControllerPhyDeviceInfo + *values + */ + +/*values for PCIe IO Unit Page 0 EnumerationStatus */ +#define MPI26_PCIEIOUNIT0_ES_MAX_SWITCHES_EXCEEDED (0x40000000) +#define MPI26_PCIEIOUNIT0_ES_MAX_DEVICES_EXCEEDED (0x20000000) + + +/*PCIe IO Unit Page 1 */ + +typedef struct _MPI26_PCIE_IO_UNIT1_PHY_DATA { + U8 Link; /*0x00 */ + U8 LinkFlags; /*0x01 */ + U8 PhyFlags; /*0x02 */ + U8 MaxMinLinkRate; /*0x03 */ + U32 ControllerPhyDeviceInfo; /*0x04 */ + U32 Reserved1; /*0x08 */ +} MPI26_PCIE_IO_UNIT1_PHY_DATA, + *PTR_MPI26_PCIE_IO_UNIT1_PHY_DATA, + Mpi26PCIeIOUnit1PhyData_t, *pMpi26PCIeIOUnit1PhyData_t; + +/*values for LinkFlags */ +#define MPI26_PCIEIOUNIT1_LINKFLAGS_DIS_SRIS (0x00) +#define MPI26_PCIEIOUNIT1_LINKFLAGS_EN_SRIS (0x01) + +/* + *Host code (drivers, BIOS, utilities, etc.) should leave this define set to + *one and check the value returned for NumPhys at runtime. + */ +#ifndef MPI26_PCIE_IOUNIT1_PHY_MAX +#define MPI26_PCIE_IOUNIT1_PHY_MAX (1) +#endif + +typedef struct _MPI26_CONFIG_PAGE_PIOUNIT_1 { + MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /*0x00 */ + U16 ControlFlags; /*0x08 */ + U16 Reserved; /*0x0A */ + U16 AdditionalControlFlags; /*0x0C */ + U16 NVMeMaxQueueDepth; /*0x0E */ + U8 NumPhys; /*0x10 */ + U8 Reserved1; /*0x11 */ + U16 Reserved2; /*0x12 */ + MPI26_PCIE_IO_UNIT1_PHY_DATA + PhyData[MPI26_PCIE_IOUNIT1_PHY_MAX];/*0x14 */ +} MPI26_CONFIG_PAGE_PIOUNIT_1, + *PTR_MPI26_CONFIG_PAGE_PIOUNIT_1, + Mpi26PCIeIOUnitPage1_t, *pMpi26PCIeIOUnitPage1_t; + +#define MPI26_PCIEIOUNITPAGE1_PAGEVERSION (0x00) + +/*values for PCIe IO Unit Page 1 PhyFlags */ +#define MPI26_PCIEIOUNIT1_PHYFLAGS_PHY_DISABLE (0x08) +#define MPI26_PCIEIOUNIT1_PHYFLAGS_ENDPOINT_ONLY (0x01) + +/*values for PCIe IO Unit Page 1 MaxMinLinkRate */ +#define MPI26_PCIEIOUNIT1_MAX_RATE_MASK (0xF0) +#define MPI26_PCIEIOUNIT1_MAX_RATE_SHIFT (4) +#define MPI26_PCIEIOUNIT1_MAX_RATE_2_5 (0x20) +#define MPI26_PCIEIOUNIT1_MAX_RATE_5_0 (0x30) +#define MPI26_PCIEIOUNIT1_MAX_RATE_8_0 (0x40) +#define MPI26_PCIEIOUNIT1_MAX_RATE_16_0 (0x50) + +/*see mpi2_pci.h for values for PCIe IO Unit Page 0 ControllerPhyDeviceInfo + *values + */ + + +/**************************************************************************** +* PCIe Switch Config Pages (MPI v2.6 and later) +****************************************************************************/ + +/*PCIe Switch Page 0 */ + +typedef struct _MPI26_CONFIG_PAGE_PSWITCH_0 { + MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /*0x00 */ + U8 PhysicalPort; /*0x08 */ + U8 Reserved1; /*0x09 */ + U16 Reserved2; /*0x0A */ + U16 DevHandle; /*0x0C */ + U16 ParentDevHandle; /*0x0E */ + U8 NumPorts; /*0x10 */ + U8 PCIeLevel; /*0x11 */ + U16 Reserved3; /*0x12 */ + U32 Reserved4; /*0x14 */ + U32 Reserved5; /*0x18 */ + U32 Reserved6; /*0x1C */ +} MPI26_CONFIG_PAGE_PSWITCH_0, *PTR_MPI26_CONFIG_PAGE_PSWITCH_0, + Mpi26PCIeSwitchPage0_t, *pMpi26PCIeSwitchPage0_t; + +#define MPI26_PCIESWITCH0_PAGEVERSION (0x00) + + +/*PCIe Switch Page 1 */ + +typedef struct _MPI26_CONFIG_PAGE_PSWITCH_1 { + MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /*0x00 */ + U8 PhysicalPort; /*0x08 */ + U8 Reserved1; /*0x09 */ + U16 Reserved2; /*0x0A */ + U8 NumPorts; /*0x0C */ + U8 PortNum; /*0x0D */ + U16 AttachedDevHandle; /*0x0E */ + U16 SwitchDevHandle; /*0x10 */ + U8 NegotiatedPortWidth; /*0x12 */ + U8 NegotiatedLinkRate; /*0x13 */ + U32 Reserved4; /*0x14 */ + U32 Reserved5; /*0x18 */ +} MPI26_CONFIG_PAGE_PSWITCH_1, *PTR_MPI26_CONFIG_PAGE_PSWITCH_1, + Mpi26PCIeSwitchPage1_t, *pMpi26PCIeSwitchPage1_t; + +#define MPI26_PCIESWITCH1_PAGEVERSION (0x00) + +/*use MPI26_PCIE_NEG_LINK_RATE_ defines for the NegotiatedLinkRate field */ + + +/**************************************************************************** +* PCIe Device Config Pages (MPI v2.6 and later) +****************************************************************************/ + +/*PCIe Device Page 0 */ + +typedef struct _MPI26_CONFIG_PAGE_PCIEDEV_0 { + MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /*0x00 */ + U16 Slot; /*0x08 */ + U16 EnclosureHandle; /*0x0A */ + U64 WWID; /*0x0C */ + U16 ParentDevHandle; /*0x14 */ + U8 PortNum; /*0x16 */ + U8 AccessStatus; /*0x17 */ + U16 DevHandle; /*0x18 */ + U8 PhysicalPort; /*0x1A */ + U8 Reserved1; /*0x1B */ + U32 DeviceInfo; /*0x1C */ + U32 Flags; /*0x20 */ + U8 SupportedLinkRates; /*0x24 */ + U8 MaxPortWidth; /*0x25 */ + U8 NegotiatedPortWidth; /*0x26 */ + U8 NegotiatedLinkRate; /*0x27 */ + U8 EnclosureLevel; /*0x28 */ + U8 Reserved2; /*0x29 */ + U16 Reserved3; /*0x2A */ + U8 ConnectorName[4]; /*0x2C */ + U32 Reserved4; /*0x30 */ + U32 Reserved5; /*0x34 */ +} MPI26_CONFIG_PAGE_PCIEDEV_0, *PTR_MPI26_CONFIG_PAGE_PCIEDEV_0, + Mpi26PCIeDevicePage0_t, *pMpi26PCIeDevicePage0_t; + +#define MPI26_PCIEDEVICE0_PAGEVERSION (0x01) + +/*values for PCIe Device Page 0 AccessStatus field */ +#define MPI26_PCIEDEV0_ASTATUS_NO_ERRORS (0x00) +#define MPI26_PCIEDEV0_ASTATUS_NEEDS_INITIALIZATION (0x04) +#define MPI26_PCIEDEV0_ASTATUS_CAPABILITY_FAILED (0x02) +#define MPI26_PCIEDEV0_ASTATUS_DEVICE_BLOCKED (0x07) +#define MPI26_PCIEDEV0_ASTATUS_MEMORY_SPACE_ACCESS_FAILED (0x08) +#define MPI26_PCIEDEV0_ASTATUS_UNSUPPORTED_DEVICE (0x09) +#define MPI26_PCIEDEV0_ASTATUS_MSIX_REQUIRED (0x0A) +#define MPI26_PCIEDEV0_ASTATUS_UNKNOWN (0x10) + +#define MPI26_PCIEDEV0_ASTATUS_NVME_READY_TIMEOUT (0x30) +#define MPI26_PCIEDEV0_ASTATUS_NVME_DEVCFG_UNSUPPORTED (0x31) +#define MPI26_PCIEDEV0_ASTATUS_NVME_IDENTIFY_FAILED (0x32) +#define MPI26_PCIEDEV0_ASTATUS_NVME_QCONFIG_FAILED (0x33) +#define MPI26_PCIEDEV0_ASTATUS_NVME_QCREATION_FAILED (0x34) +#define MPI26_PCIEDEV0_ASTATUS_NVME_EVENTCFG_FAILED (0x35) +#define MPI26_PCIEDEV0_ASTATUS_NVME_GET_FEATURE_STAT_FAILED (0x36) +#define MPI26_PCIEDEV0_ASTATUS_NVME_IDLE_TIMEOUT (0x37) +#define MPI26_PCIEDEV0_ASTATUS_NVME_FAILURE_STATUS (0x38) + +#define MPI26_PCIEDEV0_ASTATUS_INIT_FAIL_MAX (0x3F) + +/*see mpi2_pci.h for the MPI26_PCIE_DEVINFO_ defines used for the DeviceInfo + *field + */ + +/*values for PCIe Device Page 0 Flags field */ +#define MPI26_PCIEDEV0_FLAGS_UNAUTHORIZED_DEVICE (0x8000) +#define MPI26_PCIEDEV0_FLAGS_ENABLED_FAST_PATH (0x4000) +#define MPI26_PCIEDEV0_FLAGS_FAST_PATH_CAPABLE (0x2000) +#define MPI26_PCIEDEV0_FLAGS_ASYNCHRONOUS_NOTIFICATION (0x0400) +#define MPI26_PCIEDEV0_FLAGS_ATA_SW_PRESERVATION (0x0200) +#define MPI26_PCIEDEV0_FLAGS_UNSUPPORTED_DEVICE (0x0100) +#define MPI26_PCIEDEV0_FLAGS_ATA_48BIT_LBA_SUPPORTED (0x0080) +#define MPI26_PCIEDEV0_FLAGS_ATA_SMART_SUPPORTED (0x0040) +#define MPI26_PCIEDEV0_FLAGS_ATA_NCQ_SUPPORTED (0x0020) +#define MPI26_PCIEDEV0_FLAGS_ATA_FUA_SUPPORTED (0x0010) +#define MPI26_PCIEDEV0_FLAGS_ENCL_LEVEL_VALID (0x0002) +#define MPI26_PCIEDEV0_FLAGS_DEVICE_PRESENT (0x0001) + +/* values for PCIe Device Page 0 SupportedLinkRates field */ +#define MPI26_PCIEDEV0_LINK_RATE_16_0_SUPPORTED (0x08) +#define MPI26_PCIEDEV0_LINK_RATE_8_0_SUPPORTED (0x04) +#define MPI26_PCIEDEV0_LINK_RATE_5_0_SUPPORTED (0x02) +#define MPI26_PCIEDEV0_LINK_RATE_2_5_SUPPORTED (0x01) + +/*use MPI26_PCIE_NEG_LINK_RATE_ defines for the NegotiatedLinkRate field */ + + +/*PCIe Device Page 2 */ + +typedef struct _MPI26_CONFIG_PAGE_PCIEDEV_2 { + MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /*0x00 */ + U16 DevHandle; /*0x08 */ + U8 ControllerResetTO; /* 0x0A */ + U8 Reserved1; /* 0x0B */ + U32 MaximumDataTransferSize; /*0x0C */ + U32 Capabilities; /*0x10 */ + U16 NOIOB; /* 0x14 */ + U16 Reserved2; /* 0x16 */ +} MPI26_CONFIG_PAGE_PCIEDEV_2, *PTR_MPI26_CONFIG_PAGE_PCIEDEV_2, + Mpi26PCIeDevicePage2_t, *pMpi26PCIeDevicePage2_t; + +#define MPI26_PCIEDEVICE2_PAGEVERSION (0x01) + +/*defines for PCIe Device Page 2 Capabilities field */ +#define MPI26_PCIEDEV2_CAP_DATA_BLK_ALIGN_AND_GRAN (0x00000008) +#define MPI26_PCIEDEV2_CAP_SGL_FORMAT (0x00000004) +#define MPI26_PCIEDEV2_CAP_BIT_BUCKET_SUPPORT (0x00000002) +#define MPI26_PCIEDEV2_CAP_SGL_SUPPORT (0x00000001) + +/* Defines for the NOIOB field */ +#define MPI26_PCIEDEV2_NOIOB_UNSUPPORTED (0x0000) + +/**************************************************************************** +* PCIe Link Config Pages (MPI v2.6 and later) +****************************************************************************/ + +/*PCIe Link Page 1 */ + +typedef struct _MPI26_CONFIG_PAGE_PCIELINK_1 { + MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /*0x00 */ + U8 Link; /*0x08 */ + U8 Reserved1; /*0x09 */ + U16 Reserved2; /*0x0A */ + U32 CorrectableErrorCount; /*0x0C */ + U16 NonFatalErrorCount; /*0x10 */ + U16 Reserved3; /*0x12 */ + U16 FatalErrorCount; /*0x14 */ + U16 Reserved4; /*0x16 */ +} MPI26_CONFIG_PAGE_PCIELINK_1, *PTR_MPI26_CONFIG_PAGE_PCIELINK_1, + Mpi26PcieLinkPage1_t, *pMpi26PcieLinkPage1_t; + +#define MPI26_PCIELINK1_PAGEVERSION (0x00) + +/*PCIe Link Page 2 */ + +typedef struct _MPI26_PCIELINK2_LINK_EVENT { + U8 LinkEventCode; /*0x00 */ + U8 Reserved1; /*0x01 */ + U16 Reserved2; /*0x02 */ + U32 LinkEventInfo; /*0x04 */ +} MPI26_PCIELINK2_LINK_EVENT, *PTR_MPI26_PCIELINK2_LINK_EVENT, + Mpi26PcieLink2LinkEvent_t, *pMpi26PcieLink2LinkEvent_t; + +/*use MPI26_PCIELINK3_EVTCODE_ for the LinkEventCode field */ + + +/* + *Host code (drivers, BIOS, utilities, etc.) should leave this define set to + *one and check the value returned for NumLinkEvents at runtime. + */ +#ifndef MPI26_PCIELINK2_LINK_EVENT_MAX +#define MPI26_PCIELINK2_LINK_EVENT_MAX (1) +#endif + +typedef struct _MPI26_CONFIG_PAGE_PCIELINK_2 { + MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /*0x00 */ + U8 Link; /*0x08 */ + U8 Reserved1; /*0x09 */ + U16 Reserved2; /*0x0A */ + U8 NumLinkEvents; /*0x0C */ + U8 Reserved3; /*0x0D */ + U16 Reserved4; /*0x0E */ + MPI26_PCIELINK2_LINK_EVENT + LinkEvent[MPI26_PCIELINK2_LINK_EVENT_MAX]; /*0x10 */ +} MPI26_CONFIG_PAGE_PCIELINK_2, *PTR_MPI26_CONFIG_PAGE_PCIELINK_2, + Mpi26PcieLinkPage2_t, *pMpi26PcieLinkPage2_t; + +#define MPI26_PCIELINK2_PAGEVERSION (0x00) + +/*PCIe Link Page 3 */ + +typedef struct _MPI26_PCIELINK3_LINK_EVENT_CONFIG { + U8 LinkEventCode; /*0x00 */ + U8 Reserved1; /*0x01 */ + U16 Reserved2; /*0x02 */ + U8 CounterType; /*0x04 */ + U8 ThresholdWindow; /*0x05 */ + U8 TimeUnits; /*0x06 */ + U8 Reserved3; /*0x07 */ + U32 EventThreshold; /*0x08 */ + U16 ThresholdFlags; /*0x0C */ + U16 Reserved4; /*0x0E */ +} MPI26_PCIELINK3_LINK_EVENT_CONFIG, *PTR_MPI26_PCIELINK3_LINK_EVENT_CONFIG, + Mpi26PcieLink3LinkEventConfig_t, *pMpi26PcieLink3LinkEventConfig_t; + +/*values for LinkEventCode field */ +#define MPI26_PCIELINK3_EVTCODE_NO_EVENT (0x00) +#define MPI26_PCIELINK3_EVTCODE_CORRECTABLE_ERROR_RECEIVED (0x01) +#define MPI26_PCIELINK3_EVTCODE_NON_FATAL_ERROR_RECEIVED (0x02) +#define MPI26_PCIELINK3_EVTCODE_FATAL_ERROR_RECEIVED (0x03) +#define MPI26_PCIELINK3_EVTCODE_DATA_LINK_ERROR_DETECTED (0x04) +#define MPI26_PCIELINK3_EVTCODE_TRANSACTION_LAYER_ERROR_DETECTED (0x05) +#define MPI26_PCIELINK3_EVTCODE_TLP_ECRC_ERROR_DETECTED (0x06) +#define MPI26_PCIELINK3_EVTCODE_POISONED_TLP (0x07) +#define MPI26_PCIELINK3_EVTCODE_RECEIVED_NAK_DLLP (0x08) +#define MPI26_PCIELINK3_EVTCODE_SENT_NAK_DLLP (0x09) +#define MPI26_PCIELINK3_EVTCODE_LTSSM_RECOVERY_STATE (0x0A) +#define MPI26_PCIELINK3_EVTCODE_LTSSM_RXL0S_STATE (0x0B) +#define MPI26_PCIELINK3_EVTCODE_LTSSM_TXL0S_STATE (0x0C) +#define MPI26_PCIELINK3_EVTCODE_LTSSM_L1_STATE (0x0D) +#define MPI26_PCIELINK3_EVTCODE_LTSSM_DISABLED_STATE (0x0E) +#define MPI26_PCIELINK3_EVTCODE_LTSSM_HOT_RESET_STATE (0x0F) +#define MPI26_PCIELINK3_EVTCODE_SYSTEM_ERROR (0x10) +#define MPI26_PCIELINK3_EVTCODE_DECODE_ERROR (0x11) +#define MPI26_PCIELINK3_EVTCODE_DISPARITY_ERROR (0x12) + +/*values for the CounterType field */ +#define MPI26_PCIELINK3_COUNTER_TYPE_WRAPPING (0x00) +#define MPI26_PCIELINK3_COUNTER_TYPE_SATURATING (0x01) +#define MPI26_PCIELINK3_COUNTER_TYPE_PEAK_VALUE (0x02) + +/*values for the TimeUnits field */ +#define MPI26_PCIELINK3_TM_UNITS_10_MICROSECONDS (0x00) +#define MPI26_PCIELINK3_TM_UNITS_100_MICROSECONDS (0x01) +#define MPI26_PCIELINK3_TM_UNITS_1_MILLISECOND (0x02) +#define MPI26_PCIELINK3_TM_UNITS_10_MILLISECONDS (0x03) + +/*values for the ThresholdFlags field */ +#define MPI26_PCIELINK3_TFLAGS_EVENT_NOTIFY (0x0001) + +/* + *Host code (drivers, BIOS, utilities, etc.) should leave this define set to + *one and check the value returned for NumLinkEvents at runtime. + */ +#ifndef MPI26_PCIELINK3_LINK_EVENT_MAX +#define MPI26_PCIELINK3_LINK_EVENT_MAX (1) +#endif + +typedef struct _MPI26_CONFIG_PAGE_PCIELINK_3 { + MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /*0x00 */ + U8 Link; /*0x08 */ + U8 Reserved1; /*0x09 */ + U16 Reserved2; /*0x0A */ + U8 NumLinkEvents; /*0x0C */ + U8 Reserved3; /*0x0D */ + U16 Reserved4; /*0x0E */ + MPI26_PCIELINK3_LINK_EVENT_CONFIG + LinkEventConfig[MPI26_PCIELINK3_LINK_EVENT_MAX]; /*0x10 */ +} MPI26_CONFIG_PAGE_PCIELINK_3, *PTR_MPI26_CONFIG_PAGE_PCIELINK_3, + Mpi26PcieLinkPage3_t, *pMpi26PcieLinkPage3_t; + +#define MPI26_PCIELINK3_PAGEVERSION (0x00) + + +#endif diff --git a/drivers/scsi/mpt3sas/mpi/mpi2_init.h b/drivers/scsi/mpt3sas/mpi/mpi2_init.h new file mode 100644 index 000000000..6213ce679 --- /dev/null +++ b/drivers/scsi/mpt3sas/mpi/mpi2_init.h @@ -0,0 +1,591 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright 2000-2015 Avago Technologies. All rights reserved. + * + * + * Name: mpi2_init.h + * Title: MPI SCSI initiator mode messages and structures + * Creation Date: June 23, 2006 + * + * mpi2_init.h Version: 02.00.21 + * + * NOTE: Names (typedefs, defines, etc.) beginning with an MPI25 or Mpi25 + * prefix are for use only on MPI v2.5 products, and must not be used + * with MPI v2.0 products. Unless otherwise noted, names beginning with + * MPI2 or Mpi2 are for use with both MPI v2.0 and MPI v2.5 products. + * + * Version History + * --------------- + * + * Date Version Description + * -------- -------- ------------------------------------------------------ + * 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A. + * 10-31-07 02.00.01 Fixed name for pMpi2SCSITaskManagementRequest_t. + * 12-18-07 02.00.02 Modified Task Management Target Reset Method defines. + * 02-29-08 02.00.03 Added Query Task Set and Query Unit Attention. + * 03-03-08 02.00.04 Fixed name of struct _MPI2_SCSI_TASK_MANAGE_REPLY. + * 05-21-08 02.00.05 Fixed typo in name of Mpi2SepRequest_t. + * 10-02-08 02.00.06 Removed Untagged and No Disconnect values from SCSI IO + * Control field Task Attribute flags. + * Moved LUN field defines to mpi2.h becasue they are + * common to many structures. + * 05-06-09 02.00.07 Changed task management type of Query Unit Attention to + * Query Asynchronous Event. + * Defined two new bits in the SlotStatus field of the SCSI + * Enclosure Processor Request and Reply. + * 10-28-09 02.00.08 Added defines for decoding the ResponseInfo bytes for + * both SCSI IO Error Reply and SCSI Task Management Reply. + * Added ResponseInfo field to MPI2_SCSI_TASK_MANAGE_REPLY. + * Added MPI2_SCSITASKMGMT_RSP_TM_OVERLAPPED_TAG define. + * 02-10-10 02.00.09 Removed unused structure that had "#if 0" around it. + * 05-12-10 02.00.10 Added optional vendor-unique region to SCSI IO Request. + * 11-10-10 02.00.11 Added MPI2_SCSIIO_NUM_SGLOFFSETS define. + * 11-18-11 02.00.12 Incorporating additions for MPI v2.5. + * 02-06-12 02.00.13 Added alternate defines for Task Priority / Command + * Priority to match SAM-4. + * Added EEDPErrorOffset to MPI2_SCSI_IO_REPLY. + * 07-10-12 02.00.14 Added MPI2_SCSIIO_CONTROL_SHIFT_DATADIRECTION. + * 04-09-13 02.00.15 Added SCSIStatusQualifier field to MPI2_SCSI_IO_REPLY, + * replacing the Reserved4 field. + * 11-18-14 02.00.16 Updated copyright information. + * 03-16-15 02.00.17 Updated for MPI v2.6. + * Added MPI26_SCSIIO_IOFLAGS_ESCAPE_PASSTHROUGH. + * Added MPI2_SEP_REQ_SLOTSTATUS_DEV_OFF and + * MPI2_SEP_REPLY_SLOTSTATUS_DEV_OFF. + * 08-26-15 02.00.18 Added SCSITASKMGMT_MSGFLAGS for Target Reset. + * 12-18-15 02.00.19 Added EEDPObservedValue added to SCSI IO Reply message. + * 01-04-16 02.00.20 Modified EEDP reported values in SCSI IO Reply message. + * 01-21-16 02.00.21 Modified MPI26_SCSITASKMGMT_MSGFLAGS_PCIE* defines to + * be unique within first 32 characters. + * -------------------------------------------------------------------------- + */ + +#ifndef MPI2_INIT_H +#define MPI2_INIT_H + +/***************************************************************************** +* +* SCSI Initiator Messages +* +*****************************************************************************/ + +/**************************************************************************** +* SCSI IO messages and associated structures +****************************************************************************/ + +typedef struct _MPI2_SCSI_IO_CDB_EEDP32 { + U8 CDB[20]; /*0x00 */ + __be32 PrimaryReferenceTag; /*0x14 */ + U16 PrimaryApplicationTag; /*0x18 */ + U16 PrimaryApplicationTagMask; /*0x1A */ + U32 TransferLength; /*0x1C */ +} MPI2_SCSI_IO_CDB_EEDP32, *PTR_MPI2_SCSI_IO_CDB_EEDP32, + Mpi2ScsiIoCdbEedp32_t, *pMpi2ScsiIoCdbEedp32_t; + +/*MPI v2.0 CDB field */ +typedef union _MPI2_SCSI_IO_CDB_UNION { + U8 CDB32[32]; + MPI2_SCSI_IO_CDB_EEDP32 EEDP32; + MPI2_SGE_SIMPLE_UNION SGE; +} MPI2_SCSI_IO_CDB_UNION, *PTR_MPI2_SCSI_IO_CDB_UNION, + Mpi2ScsiIoCdb_t, *pMpi2ScsiIoCdb_t; + +/*MPI v2.0 SCSI IO Request Message */ +typedef struct _MPI2_SCSI_IO_REQUEST { + U16 DevHandle; /*0x00 */ + U8 ChainOffset; /*0x02 */ + U8 Function; /*0x03 */ + U16 Reserved1; /*0x04 */ + U8 Reserved2; /*0x06 */ + U8 MsgFlags; /*0x07 */ + U8 VP_ID; /*0x08 */ + U8 VF_ID; /*0x09 */ + U16 Reserved3; /*0x0A */ + U32 SenseBufferLowAddress; /*0x0C */ + U16 SGLFlags; /*0x10 */ + U8 SenseBufferLength; /*0x12 */ + U8 Reserved4; /*0x13 */ + U8 SGLOffset0; /*0x14 */ + U8 SGLOffset1; /*0x15 */ + U8 SGLOffset2; /*0x16 */ + U8 SGLOffset3; /*0x17 */ + U32 SkipCount; /*0x18 */ + U32 DataLength; /*0x1C */ + U32 BidirectionalDataLength; /*0x20 */ + U16 IoFlags; /*0x24 */ + U16 EEDPFlags; /*0x26 */ + U32 EEDPBlockSize; /*0x28 */ + U32 SecondaryReferenceTag; /*0x2C */ + U16 SecondaryApplicationTag; /*0x30 */ + U16 ApplicationTagTranslationMask; /*0x32 */ + U8 LUN[8]; /*0x34 */ + U32 Control; /*0x3C */ + MPI2_SCSI_IO_CDB_UNION CDB; /*0x40 */ + +#ifdef MPI2_SCSI_IO_VENDOR_UNIQUE_REGION /*typically this is left undefined */ + MPI2_SCSI_IO_VENDOR_UNIQUE VendorRegion; +#endif + + MPI2_SGE_IO_UNION SGL; /*0x60 */ + +} MPI2_SCSI_IO_REQUEST, *PTR_MPI2_SCSI_IO_REQUEST, + Mpi2SCSIIORequest_t, *pMpi2SCSIIORequest_t; + +/*SCSI IO MsgFlags bits */ + +/*MsgFlags for SenseBufferAddressSpace */ +#define MPI2_SCSIIO_MSGFLAGS_MASK_SENSE_ADDR (0x0C) +#define MPI2_SCSIIO_MSGFLAGS_SYSTEM_SENSE_ADDR (0x00) +#define MPI2_SCSIIO_MSGFLAGS_IOCDDR_SENSE_ADDR (0x04) +#define MPI2_SCSIIO_MSGFLAGS_IOCPLB_SENSE_ADDR (0x08) +#define MPI2_SCSIIO_MSGFLAGS_IOCPLBNTA_SENSE_ADDR (0x0C) +#define MPI26_SCSIIO_MSGFLAGS_IOCCTL_SENSE_ADDR (0x08) + +/*SCSI IO SGLFlags bits */ + +/*base values for Data Location Address Space */ +#define MPI2_SCSIIO_SGLFLAGS_ADDR_MASK (0x0C) +#define MPI2_SCSIIO_SGLFLAGS_SYSTEM_ADDR (0x00) +#define MPI2_SCSIIO_SGLFLAGS_IOCDDR_ADDR (0x04) +#define MPI2_SCSIIO_SGLFLAGS_IOCPLB_ADDR (0x08) +#define MPI2_SCSIIO_SGLFLAGS_IOCPLBNTA_ADDR (0x0C) + +/*base values for Type */ +#define MPI2_SCSIIO_SGLFLAGS_TYPE_MASK (0x03) +#define MPI2_SCSIIO_SGLFLAGS_TYPE_MPI (0x00) +#define MPI2_SCSIIO_SGLFLAGS_TYPE_IEEE32 (0x01) +#define MPI2_SCSIIO_SGLFLAGS_TYPE_IEEE64 (0x02) + +/*shift values for each sub-field */ +#define MPI2_SCSIIO_SGLFLAGS_SGL3_SHIFT (12) +#define MPI2_SCSIIO_SGLFLAGS_SGL2_SHIFT (8) +#define MPI2_SCSIIO_SGLFLAGS_SGL1_SHIFT (4) +#define MPI2_SCSIIO_SGLFLAGS_SGL0_SHIFT (0) + +/*number of SGLOffset fields */ +#define MPI2_SCSIIO_NUM_SGLOFFSETS (4) + +/*SCSI IO IoFlags bits */ + +/*Large CDB Address Space */ +#define MPI2_SCSIIO_CDB_ADDR_MASK (0x6000) +#define MPI2_SCSIIO_CDB_ADDR_SYSTEM (0x0000) +#define MPI2_SCSIIO_CDB_ADDR_IOCDDR (0x2000) +#define MPI2_SCSIIO_CDB_ADDR_IOCPLB (0x4000) +#define MPI2_SCSIIO_CDB_ADDR_IOCPLBNTA (0x6000) + +#define MPI2_SCSIIO_IOFLAGS_LARGE_CDB (0x1000) +#define MPI2_SCSIIO_IOFLAGS_BIDIRECTIONAL (0x0800) +#define MPI2_SCSIIO_IOFLAGS_MULTICAST (0x0400) +#define MPI2_SCSIIO_IOFLAGS_CMD_DETERMINES_DATA_DIR (0x0200) +#define MPI2_SCSIIO_IOFLAGS_CDBLENGTH_MASK (0x01FF) + +/*SCSI IO EEDPFlags bits */ + +#define MPI2_SCSIIO_EEDPFLAGS_INC_PRI_REFTAG (0x8000) +#define MPI2_SCSIIO_EEDPFLAGS_INC_SEC_REFTAG (0x4000) +#define MPI2_SCSIIO_EEDPFLAGS_INC_PRI_APPTAG (0x2000) +#define MPI2_SCSIIO_EEDPFLAGS_INC_SEC_APPTAG (0x1000) + +#define MPI2_SCSIIO_EEDPFLAGS_CHECK_REFTAG (0x0400) +#define MPI2_SCSIIO_EEDPFLAGS_CHECK_APPTAG (0x0200) +#define MPI2_SCSIIO_EEDPFLAGS_CHECK_GUARD (0x0100) + +#define MPI2_SCSIIO_EEDPFLAGS_PASSTHRU_REFTAG (0x0008) + +#define MPI2_SCSIIO_EEDPFLAGS_MASK_OP (0x0007) +#define MPI2_SCSIIO_EEDPFLAGS_NOOP_OP (0x0000) +#define MPI2_SCSIIO_EEDPFLAGS_CHECK_OP (0x0001) +#define MPI2_SCSIIO_EEDPFLAGS_STRIP_OP (0x0002) +#define MPI2_SCSIIO_EEDPFLAGS_CHECK_REMOVE_OP (0x0003) +#define MPI2_SCSIIO_EEDPFLAGS_INSERT_OP (0x0004) +#define MPI2_SCSIIO_EEDPFLAGS_REPLACE_OP (0x0006) +#define MPI2_SCSIIO_EEDPFLAGS_CHECK_REGEN_OP (0x0007) + +/*SCSI IO LUN fields: use MPI2_LUN_ from mpi2.h */ + +/*SCSI IO Control bits */ +#define MPI2_SCSIIO_CONTROL_ADDCDBLEN_MASK (0xFC000000) +#define MPI2_SCSIIO_CONTROL_ADDCDBLEN_SHIFT (26) + +#define MPI2_SCSIIO_CONTROL_DATADIRECTION_MASK (0x03000000) +#define MPI2_SCSIIO_CONTROL_SHIFT_DATADIRECTION (24) +#define MPI2_SCSIIO_CONTROL_NODATATRANSFER (0x00000000) +#define MPI2_SCSIIO_CONTROL_WRITE (0x01000000) +#define MPI2_SCSIIO_CONTROL_READ (0x02000000) +#define MPI2_SCSIIO_CONTROL_BIDIRECTIONAL (0x03000000) + +#define MPI2_SCSIIO_CONTROL_TASKPRI_MASK (0x00007800) +#define MPI2_SCSIIO_CONTROL_TASKPRI_SHIFT (11) +/*alternate name for the previous field; called Command Priority in SAM-4 */ +#define MPI2_SCSIIO_CONTROL_CMDPRI_MASK (0x00007800) +#define MPI2_SCSIIO_CONTROL_CMDPRI_SHIFT (11) + +#define MPI2_SCSIIO_CONTROL_TASKATTRIBUTE_MASK (0x00000700) +#define MPI2_SCSIIO_CONTROL_SIMPLEQ (0x00000000) +#define MPI2_SCSIIO_CONTROL_HEADOFQ (0x00000100) +#define MPI2_SCSIIO_CONTROL_ORDEREDQ (0x00000200) +#define MPI2_SCSIIO_CONTROL_ACAQ (0x00000400) + +#define MPI2_SCSIIO_CONTROL_TLR_MASK (0x000000C0) +#define MPI2_SCSIIO_CONTROL_NO_TLR (0x00000000) +#define MPI2_SCSIIO_CONTROL_TLR_ON (0x00000040) +#define MPI2_SCSIIO_CONTROL_TLR_OFF (0x00000080) + +/*MPI v2.5 CDB field */ +typedef union _MPI25_SCSI_IO_CDB_UNION { + U8 CDB32[32]; + MPI2_SCSI_IO_CDB_EEDP32 EEDP32; + MPI2_IEEE_SGE_SIMPLE64 SGE; +} MPI25_SCSI_IO_CDB_UNION, *PTR_MPI25_SCSI_IO_CDB_UNION, + Mpi25ScsiIoCdb_t, *pMpi25ScsiIoCdb_t; + +/*MPI v2.5/2.6 SCSI IO Request Message */ +typedef struct _MPI25_SCSI_IO_REQUEST { + U16 DevHandle; /*0x00 */ + U8 ChainOffset; /*0x02 */ + U8 Function; /*0x03 */ + U16 Reserved1; /*0x04 */ + U8 Reserved2; /*0x06 */ + U8 MsgFlags; /*0x07 */ + U8 VP_ID; /*0x08 */ + U8 VF_ID; /*0x09 */ + U16 Reserved3; /*0x0A */ + U32 SenseBufferLowAddress; /*0x0C */ + U8 DMAFlags; /*0x10 */ + U8 Reserved5; /*0x11 */ + U8 SenseBufferLength; /*0x12 */ + U8 Reserved4; /*0x13 */ + U8 SGLOffset0; /*0x14 */ + U8 SGLOffset1; /*0x15 */ + U8 SGLOffset2; /*0x16 */ + U8 SGLOffset3; /*0x17 */ + U32 SkipCount; /*0x18 */ + U32 DataLength; /*0x1C */ + U32 BidirectionalDataLength; /*0x20 */ + U16 IoFlags; /*0x24 */ + U16 EEDPFlags; /*0x26 */ + U16 EEDPBlockSize; /*0x28 */ + U16 Reserved6; /*0x2A */ + U32 SecondaryReferenceTag; /*0x2C */ + U16 SecondaryApplicationTag; /*0x30 */ + U16 ApplicationTagTranslationMask; /*0x32 */ + U8 LUN[8]; /*0x34 */ + U32 Control; /*0x3C */ + MPI25_SCSI_IO_CDB_UNION CDB; /*0x40 */ + +#ifdef MPI25_SCSI_IO_VENDOR_UNIQUE_REGION /*typically this is left undefined */ + MPI25_SCSI_IO_VENDOR_UNIQUE VendorRegion; +#endif + + MPI25_SGE_IO_UNION SGL; /*0x60 */ + +} MPI25_SCSI_IO_REQUEST, *PTR_MPI25_SCSI_IO_REQUEST, + Mpi25SCSIIORequest_t, *pMpi25SCSIIORequest_t; + +/*use MPI2_SCSIIO_MSGFLAGS_ defines for the MsgFlags field */ + +/*Defines for the DMAFlags field + * Each setting affects 4 SGLS, from SGL0 to SGL3. + * D = Data + * C = Cache DIF + * I = Interleaved + * H = Host DIF + */ +#define MPI25_SCSIIO_DMAFLAGS_OP_MASK (0x0F) +#define MPI25_SCSIIO_DMAFLAGS_OP_D_D_D_D (0x00) +#define MPI25_SCSIIO_DMAFLAGS_OP_D_D_D_C (0x01) +#define MPI25_SCSIIO_DMAFLAGS_OP_D_D_D_I (0x02) +#define MPI25_SCSIIO_DMAFLAGS_OP_D_D_C_C (0x03) +#define MPI25_SCSIIO_DMAFLAGS_OP_D_D_C_I (0x04) +#define MPI25_SCSIIO_DMAFLAGS_OP_D_D_I_I (0x05) +#define MPI25_SCSIIO_DMAFLAGS_OP_D_C_C_C (0x06) +#define MPI25_SCSIIO_DMAFLAGS_OP_D_C_C_I (0x07) +#define MPI25_SCSIIO_DMAFLAGS_OP_D_C_I_I (0x08) +#define MPI25_SCSIIO_DMAFLAGS_OP_D_I_I_I (0x09) +#define MPI25_SCSIIO_DMAFLAGS_OP_D_H_D_D (0x0A) +#define MPI25_SCSIIO_DMAFLAGS_OP_D_H_D_C (0x0B) +#define MPI25_SCSIIO_DMAFLAGS_OP_D_H_D_I (0x0C) +#define MPI25_SCSIIO_DMAFLAGS_OP_D_H_C_C (0x0D) +#define MPI25_SCSIIO_DMAFLAGS_OP_D_H_C_I (0x0E) +#define MPI25_SCSIIO_DMAFLAGS_OP_D_H_I_I (0x0F) + +/*number of SGLOffset fields */ +#define MPI25_SCSIIO_NUM_SGLOFFSETS (4) + +/*defines for the IoFlags field */ +#define MPI25_SCSIIO_IOFLAGS_IO_PATH_MASK (0xC000) +#define MPI25_SCSIIO_IOFLAGS_NORMAL_PATH (0x0000) +#define MPI25_SCSIIO_IOFLAGS_FAST_PATH (0x4000) + +#define MPI26_SCSIIO_IOFLAGS_ESCAPE_PASSTHROUGH (0x2000) +#define MPI25_SCSIIO_IOFLAGS_LARGE_CDB (0x1000) +#define MPI25_SCSIIO_IOFLAGS_BIDIRECTIONAL (0x0800) +#define MPI26_SCSIIO_IOFLAGS_PORT_REQUEST (0x0400) +#define MPI25_SCSIIO_IOFLAGS_CDBLENGTH_MASK (0x01FF) + +/*MPI v2.5 defines for the EEDPFlags bits */ +/*use MPI2_SCSIIO_EEDPFLAGS_ defines for the other EEDPFlags bits */ +#define MPI25_SCSIIO_EEDPFLAGS_ESCAPE_MODE_MASK (0x00C0) +#define MPI25_SCSIIO_EEDPFLAGS_COMPATIBLE_MODE (0x0000) +#define MPI25_SCSIIO_EEDPFLAGS_DO_NOT_DISABLE_MODE (0x0040) +#define MPI25_SCSIIO_EEDPFLAGS_APPTAG_DISABLE_MODE (0x0080) +#define MPI25_SCSIIO_EEDPFLAGS_APPTAG_REFTAG_DISABLE_MODE (0x00C0) + +#define MPI25_SCSIIO_EEDPFLAGS_HOST_GUARD_METHOD_MASK (0x0030) +#define MPI25_SCSIIO_EEDPFLAGS_T10_CRC_HOST_GUARD (0x0000) +#define MPI25_SCSIIO_EEDPFLAGS_IP_CHKSUM_HOST_GUARD (0x0010) + +/*use MPI2_LUN_ defines from mpi2.h for the LUN field */ + +/*use MPI2_SCSIIO_CONTROL_ defines for the Control field */ + +/*NOTE: The SCSI IO Reply is nearly the same for MPI 2.0 and MPI 2.5, so + * MPI2_SCSI_IO_REPLY is used for both. + */ + +/*SCSI IO Error Reply Message */ +typedef struct _MPI2_SCSI_IO_REPLY { + U16 DevHandle; /*0x00 */ + U8 MsgLength; /*0x02 */ + U8 Function; /*0x03 */ + U16 Reserved1; /*0x04 */ + U8 Reserved2; /*0x06 */ + U8 MsgFlags; /*0x07 */ + U8 VP_ID; /*0x08 */ + U8 VF_ID; /*0x09 */ + U16 Reserved3; /*0x0A */ + U8 SCSIStatus; /*0x0C */ + U8 SCSIState; /*0x0D */ + U16 IOCStatus; /*0x0E */ + U32 IOCLogInfo; /*0x10 */ + U32 TransferCount; /*0x14 */ + U32 SenseCount; /*0x18 */ + U32 ResponseInfo; /*0x1C */ + U16 TaskTag; /*0x20 */ + U16 SCSIStatusQualifier; /* 0x22 */ + U32 BidirectionalTransferCount; /*0x24 */ + /* MPI 2.5+ only; Reserved in MPI 2.0 */ + U32 EEDPErrorOffset; /* 0x28 */ + /* MPI 2.5+ only; Reserved in MPI 2.0 */ + U16 EEDPObservedAppTag; /* 0x2C */ + /* MPI 2.5+ only; Reserved in MPI 2.0 */ + U16 EEDPObservedGuard; /* 0x2E */ + /* MPI 2.5+ only; Reserved in MPI 2.0 */ + U32 EEDPObservedRefTag; /* 0x30 */ +} MPI2_SCSI_IO_REPLY, *PTR_MPI2_SCSI_IO_REPLY, + Mpi2SCSIIOReply_t, *pMpi2SCSIIOReply_t; + +/*SCSI IO Reply MsgFlags bits */ +#define MPI26_SCSIIO_REPLY_MSGFLAGS_REFTAG_OBSERVED_VALID (0x01) +#define MPI26_SCSIIO_REPLY_MSGFLAGS_GUARD_OBSERVED_VALID (0x02) +#define MPI26_SCSIIO_REPLY_MSGFLAGS_APPTAG_OBSERVED_VALID (0x04) + +/*SCSI IO Reply SCSIStatus values (SAM-4 status codes) */ + +#define MPI2_SCSI_STATUS_GOOD (0x00) +#define MPI2_SCSI_STATUS_CHECK_CONDITION (0x02) +#define MPI2_SCSI_STATUS_CONDITION_MET (0x04) +#define MPI2_SCSI_STATUS_BUSY (0x08) +#define MPI2_SCSI_STATUS_INTERMEDIATE (0x10) +#define MPI2_SCSI_STATUS_INTERMEDIATE_CONDMET (0x14) +#define MPI2_SCSI_STATUS_RESERVATION_CONFLICT (0x18) +#define MPI2_SCSI_STATUS_COMMAND_TERMINATED (0x22) /*obsolete */ +#define MPI2_SCSI_STATUS_TASK_SET_FULL (0x28) +#define MPI2_SCSI_STATUS_ACA_ACTIVE (0x30) +#define MPI2_SCSI_STATUS_TASK_ABORTED (0x40) + +/*SCSI IO Reply SCSIState flags */ + +#define MPI2_SCSI_STATE_RESPONSE_INFO_VALID (0x10) +#define MPI2_SCSI_STATE_TERMINATED (0x08) +#define MPI2_SCSI_STATE_NO_SCSI_STATUS (0x04) +#define MPI2_SCSI_STATE_AUTOSENSE_FAILED (0x02) +#define MPI2_SCSI_STATE_AUTOSENSE_VALID (0x01) + +/*masks and shifts for the ResponseInfo field */ + +#define MPI2_SCSI_RI_MASK_REASONCODE (0x000000FF) +#define MPI2_SCSI_RI_SHIFT_REASONCODE (0) + +#define MPI2_SCSI_TASKTAG_UNKNOWN (0xFFFF) + +/**************************************************************************** +* SCSI Task Management messages +****************************************************************************/ + +/*SCSI Task Management Request Message */ +typedef struct _MPI2_SCSI_TASK_MANAGE_REQUEST { + U16 DevHandle; /*0x00 */ + U8 ChainOffset; /*0x02 */ + U8 Function; /*0x03 */ + U8 Reserved1; /*0x04 */ + U8 TaskType; /*0x05 */ + U8 Reserved2; /*0x06 */ + U8 MsgFlags; /*0x07 */ + U8 VP_ID; /*0x08 */ + U8 VF_ID; /*0x09 */ + U16 Reserved3; /*0x0A */ + U8 LUN[8]; /*0x0C */ + U32 Reserved4[7]; /*0x14 */ + U16 TaskMID; /*0x30 */ + U16 Reserved5; /*0x32 */ +} MPI2_SCSI_TASK_MANAGE_REQUEST, + *PTR_MPI2_SCSI_TASK_MANAGE_REQUEST, + Mpi2SCSITaskManagementRequest_t, + *pMpi2SCSITaskManagementRequest_t; + +/*TaskType values */ + +#define MPI2_SCSITASKMGMT_TASKTYPE_ABORT_TASK (0x01) +#define MPI2_SCSITASKMGMT_TASKTYPE_ABRT_TASK_SET (0x02) +#define MPI2_SCSITASKMGMT_TASKTYPE_TARGET_RESET (0x03) +#define MPI2_SCSITASKMGMT_TASKTYPE_LOGICAL_UNIT_RESET (0x05) +#define MPI2_SCSITASKMGMT_TASKTYPE_CLEAR_TASK_SET (0x06) +#define MPI2_SCSITASKMGMT_TASKTYPE_QUERY_TASK (0x07) +#define MPI2_SCSITASKMGMT_TASKTYPE_CLR_ACA (0x08) +#define MPI2_SCSITASKMGMT_TASKTYPE_QRY_TASK_SET (0x09) +#define MPI2_SCSITASKMGMT_TASKTYPE_QRY_ASYNC_EVENT (0x0A) + +/*obsolete TaskType name */ +#define MPI2_SCSITASKMGMT_TASKTYPE_QRY_UNIT_ATTENTION \ + (MPI2_SCSITASKMGMT_TASKTYPE_QRY_ASYNC_EVENT) + +/*MsgFlags bits */ + +#define MPI2_SCSITASKMGMT_MSGFLAGS_MASK_TARGET_RESET (0x18) +#define MPI26_SCSITASKMGMT_MSGFLAGS_HOT_RESET_PCIE (0x00) +#define MPI2_SCSITASKMGMT_MSGFLAGS_LINK_RESET (0x00) +#define MPI2_SCSITASKMGMT_MSGFLAGS_NEXUS_RESET_SRST (0x08) +#define MPI2_SCSITASKMGMT_MSGFLAGS_SAS_HARD_LINK_RESET (0x10) + +#define MPI2_SCSITASKMGMT_MSGFLAGS_DO_NOT_SEND_TASK_IU (0x01) +#define MPI26_SCSITASKMGMT_MSGFLAGS_PROTOCOL_LVL_RST_PCIE (0x18) + +/*SCSI Task Management Reply Message */ +typedef struct _MPI2_SCSI_TASK_MANAGE_REPLY { + U16 DevHandle; /*0x00 */ + U8 MsgLength; /*0x02 */ + U8 Function; /*0x03 */ + U8 ResponseCode; /*0x04 */ + U8 TaskType; /*0x05 */ + U8 Reserved1; /*0x06 */ + U8 MsgFlags; /*0x07 */ + U8 VP_ID; /*0x08 */ + U8 VF_ID; /*0x09 */ + U16 Reserved2; /*0x0A */ + U16 Reserved3; /*0x0C */ + U16 IOCStatus; /*0x0E */ + U32 IOCLogInfo; /*0x10 */ + U32 TerminationCount; /*0x14 */ + U32 ResponseInfo; /*0x18 */ +} MPI2_SCSI_TASK_MANAGE_REPLY, + *PTR_MPI2_SCSI_TASK_MANAGE_REPLY, + Mpi2SCSITaskManagementReply_t, *pMpi2SCSIManagementReply_t; + +/*ResponseCode values */ + +#define MPI2_SCSITASKMGMT_RSP_TM_COMPLETE (0x00) +#define MPI2_SCSITASKMGMT_RSP_INVALID_FRAME (0x02) +#define MPI2_SCSITASKMGMT_RSP_TM_NOT_SUPPORTED (0x04) +#define MPI2_SCSITASKMGMT_RSP_TM_FAILED (0x05) +#define MPI2_SCSITASKMGMT_RSP_TM_SUCCEEDED (0x08) +#define MPI2_SCSITASKMGMT_RSP_TM_INVALID_LUN (0x09) +#define MPI2_SCSITASKMGMT_RSP_TM_OVERLAPPED_TAG (0x0A) +#define MPI2_SCSITASKMGMT_RSP_IO_QUEUED_ON_IOC (0x80) + +/*masks and shifts for the ResponseInfo field */ + +#define MPI2_SCSITASKMGMT_RI_MASK_REASONCODE (0x000000FF) +#define MPI2_SCSITASKMGMT_RI_SHIFT_REASONCODE (0) +#define MPI2_SCSITASKMGMT_RI_MASK_ARI2 (0x0000FF00) +#define MPI2_SCSITASKMGMT_RI_SHIFT_ARI2 (8) +#define MPI2_SCSITASKMGMT_RI_MASK_ARI1 (0x00FF0000) +#define MPI2_SCSITASKMGMT_RI_SHIFT_ARI1 (16) +#define MPI2_SCSITASKMGMT_RI_MASK_ARI0 (0xFF000000) +#define MPI2_SCSITASKMGMT_RI_SHIFT_ARI0 (24) + +/**************************************************************************** +* SCSI Enclosure Processor messages +****************************************************************************/ + +/*SCSI Enclosure Processor Request Message */ +typedef struct _MPI2_SEP_REQUEST { + U16 DevHandle; /*0x00 */ + U8 ChainOffset; /*0x02 */ + U8 Function; /*0x03 */ + U8 Action; /*0x04 */ + U8 Flags; /*0x05 */ + U8 Reserved1; /*0x06 */ + U8 MsgFlags; /*0x07 */ + U8 VP_ID; /*0x08 */ + U8 VF_ID; /*0x09 */ + U16 Reserved2; /*0x0A */ + U32 SlotStatus; /*0x0C */ + U32 Reserved3; /*0x10 */ + U32 Reserved4; /*0x14 */ + U32 Reserved5; /*0x18 */ + U16 Slot; /*0x1C */ + U16 EnclosureHandle; /*0x1E */ +} MPI2_SEP_REQUEST, *PTR_MPI2_SEP_REQUEST, + Mpi2SepRequest_t, *pMpi2SepRequest_t; + +/*Action defines */ +#define MPI2_SEP_REQ_ACTION_WRITE_STATUS (0x00) +#define MPI2_SEP_REQ_ACTION_READ_STATUS (0x01) + +/*Flags defines */ +#define MPI2_SEP_REQ_FLAGS_DEVHANDLE_ADDRESS (0x00) +#define MPI2_SEP_REQ_FLAGS_ENCLOSURE_SLOT_ADDRESS (0x01) + +/*SlotStatus defines */ +#define MPI2_SEP_REQ_SLOTSTATUS_DEV_OFF (0x00080000) +#define MPI2_SEP_REQ_SLOTSTATUS_REQUEST_REMOVE (0x00040000) +#define MPI2_SEP_REQ_SLOTSTATUS_IDENTIFY_REQUEST (0x00020000) +#define MPI2_SEP_REQ_SLOTSTATUS_REBUILD_STOPPED (0x00000200) +#define MPI2_SEP_REQ_SLOTSTATUS_HOT_SPARE (0x00000100) +#define MPI2_SEP_REQ_SLOTSTATUS_UNCONFIGURED (0x00000080) +#define MPI2_SEP_REQ_SLOTSTATUS_PREDICTED_FAULT (0x00000040) +#define MPI2_SEP_REQ_SLOTSTATUS_IN_CRITICAL_ARRAY (0x00000010) +#define MPI2_SEP_REQ_SLOTSTATUS_IN_FAILED_ARRAY (0x00000008) +#define MPI2_SEP_REQ_SLOTSTATUS_DEV_REBUILDING (0x00000004) +#define MPI2_SEP_REQ_SLOTSTATUS_DEV_FAULTY (0x00000002) +#define MPI2_SEP_REQ_SLOTSTATUS_NO_ERROR (0x00000001) + +/*SCSI Enclosure Processor Reply Message */ +typedef struct _MPI2_SEP_REPLY { + U16 DevHandle; /*0x00 */ + U8 MsgLength; /*0x02 */ + U8 Function; /*0x03 */ + U8 Action; /*0x04 */ + U8 Flags; /*0x05 */ + U8 Reserved1; /*0x06 */ + U8 MsgFlags; /*0x07 */ + U8 VP_ID; /*0x08 */ + U8 VF_ID; /*0x09 */ + U16 Reserved2; /*0x0A */ + U16 Reserved3; /*0x0C */ + U16 IOCStatus; /*0x0E */ + U32 IOCLogInfo; /*0x10 */ + U32 SlotStatus; /*0x14 */ + U32 Reserved4; /*0x18 */ + U16 Slot; /*0x1C */ + U16 EnclosureHandle; /*0x1E */ +} MPI2_SEP_REPLY, *PTR_MPI2_SEP_REPLY, + Mpi2SepReply_t, *pMpi2SepReply_t; + +/*SlotStatus defines */ +#define MPI2_SEP_REPLY_SLOTSTATUS_DEV_OFF (0x00080000) +#define MPI2_SEP_REPLY_SLOTSTATUS_REMOVE_READY (0x00040000) +#define MPI2_SEP_REPLY_SLOTSTATUS_IDENTIFY_REQUEST (0x00020000) +#define MPI2_SEP_REPLY_SLOTSTATUS_REBUILD_STOPPED (0x00000200) +#define MPI2_SEP_REPLY_SLOTSTATUS_HOT_SPARE (0x00000100) +#define MPI2_SEP_REPLY_SLOTSTATUS_UNCONFIGURED (0x00000080) +#define MPI2_SEP_REPLY_SLOTSTATUS_PREDICTED_FAULT (0x00000040) +#define MPI2_SEP_REPLY_SLOTSTATUS_IN_CRITICAL_ARRAY (0x00000010) +#define MPI2_SEP_REPLY_SLOTSTATUS_IN_FAILED_ARRAY (0x00000008) +#define MPI2_SEP_REPLY_SLOTSTATUS_DEV_REBUILDING (0x00000004) +#define MPI2_SEP_REPLY_SLOTSTATUS_DEV_FAULTY (0x00000002) +#define MPI2_SEP_REPLY_SLOTSTATUS_NO_ERROR (0x00000001) + +#endif diff --git a/drivers/scsi/mpt3sas/mpi/mpi2_ioc.h b/drivers/scsi/mpt3sas/mpi/mpi2_ioc.h new file mode 100644 index 000000000..1faec3a93 --- /dev/null +++ b/drivers/scsi/mpt3sas/mpi/mpi2_ioc.h @@ -0,0 +1,2142 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright 2000-2015 Avago Technologies. All rights reserved. + * + * + * Name: mpi2_ioc.h + * Title: MPI IOC, Port, Event, FW Download, and FW Upload messages + * Creation Date: October 11, 2006 + * + * mpi2_ioc.h Version: 02.00.34 + * + * NOTE: Names (typedefs, defines, etc.) beginning with an MPI25 or Mpi25 + * prefix are for use only on MPI v2.5 products, and must not be used + * with MPI v2.0 products. Unless otherwise noted, names beginning with + * MPI2 or Mpi2 are for use with both MPI v2.0 and MPI v2.5 products. + * + * Version History + * --------------- + * + * Date Version Description + * -------- -------- ------------------------------------------------------ + * 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A. + * 06-04-07 02.00.01 In IOCFacts Reply structure, renamed MaxDevices to + * MaxTargets. + * Added TotalImageSize field to FWDownload Request. + * Added reserved words to FWUpload Request. + * 06-26-07 02.00.02 Added IR Configuration Change List Event. + * 08-31-07 02.00.03 Removed SystemReplyQueueDepth field from the IOCInit + * request and replaced it with + * ReplyDescriptorPostQueueDepth and ReplyFreeQueueDepth. + * Replaced the MinReplyQueueDepth field of the IOCFacts + * reply with MaxReplyDescriptorPostQueueDepth. + * Added MPI2_RDPQ_DEPTH_MIN define to specify the minimum + * depth for the Reply Descriptor Post Queue. + * Added SASAddress field to Initiator Device Table + * Overflow Event data. + * 10-31-07 02.00.04 Added ReasonCode MPI2_EVENT_SAS_INIT_RC_NOT_RESPONDING + * for SAS Initiator Device Status Change Event data. + * Modified Reason Code defines for SAS Topology Change + * List Event data, including adding a bit for PHY Vacant + * status, and adding a mask for the Reason Code. + * Added define for + * MPI2_EVENT_SAS_TOPO_ES_DELAY_NOT_RESPONDING. + * Added define for MPI2_EXT_IMAGE_TYPE_MEGARAID. + * 12-18-07 02.00.05 Added Boot Status defines for the IOCExceptions field of + * the IOCFacts Reply. + * Removed MPI2_IOCFACTS_CAPABILITY_EXTENDED_BUFFER define. + * Moved MPI2_VERSION_UNION to mpi2.h. + * Changed MPI2_EVENT_NOTIFICATION_REQUEST to use masks + * instead of enables, and added SASBroadcastPrimitiveMasks + * field. + * Added Log Entry Added Event and related structure. + * 02-29-08 02.00.06 Added define MPI2_IOCFACTS_CAPABILITY_INTEGRATED_RAID. + * Removed define MPI2_IOCFACTS_PROTOCOL_SMP_TARGET. + * Added MaxVolumes and MaxPersistentEntries fields to + * IOCFacts reply. + * Added ProtocalFlags and IOCCapabilities fields to + * MPI2_FW_IMAGE_HEADER. + * Removed MPI2_PORTENABLE_FLAGS_ENABLE_SINGLE_PORT. + * 03-03-08 02.00.07 Fixed MPI2_FW_IMAGE_HEADER by changing Reserved26 to + * a U16 (from a U32). + * Removed extra 's' from EventMasks name. + * 06-27-08 02.00.08 Fixed an offset in a comment. + * 10-02-08 02.00.09 Removed SystemReplyFrameSize from MPI2_IOC_INIT_REQUEST. + * Removed CurReplyFrameSize from MPI2_IOC_FACTS_REPLY and + * renamed MinReplyFrameSize to ReplyFrameSize. + * Added MPI2_IOCFACTS_EXCEPT_IR_FOREIGN_CONFIG_MAX. + * Added two new RAIDOperation values for Integrated RAID + * Operations Status Event data. + * Added four new IR Configuration Change List Event data + * ReasonCode values. + * Added two new ReasonCode defines for SAS Device Status + * Change Event data. + * Added three new DiscoveryStatus bits for the SAS + * Discovery event data. + * Added Multiplexing Status Change bit to the PhyStatus + * field of the SAS Topology Change List event data. + * Removed define for MPI2_INIT_IMAGE_BOOTFLAGS_XMEMCOPY. + * BootFlags are now product-specific. + * Added defines for the indivdual signature bytes + * for MPI2_INIT_IMAGE_FOOTER. + * 01-19-09 02.00.10 Added MPI2_IOCFACTS_CAPABILITY_EVENT_REPLAY define. + * Added MPI2_EVENT_SAS_DISC_DS_DOWNSTREAM_INITIATOR + * define. + * Added MPI2_EVENT_SAS_DEV_STAT_RC_SATA_INIT_FAILURE + * define. + * Removed MPI2_EVENT_SAS_DISC_DS_SATA_INIT_FAILURE define. + * 05-06-09 02.00.11 Added MPI2_IOCFACTS_CAPABILITY_RAID_ACCELERATOR define. + * Added MPI2_IOCFACTS_CAPABILITY_MSI_X_INDEX define. + * Added two new reason codes for SAS Device Status Change + * Event. + * Added new event: SAS PHY Counter. + * 07-30-09 02.00.12 Added GPIO Interrupt event define and structure. + * Added MPI2_IOCFACTS_CAPABILITY_EXTENDED_BUFFER define. + * Added new product id family for 2208. + * 10-28-09 02.00.13 Added HostMSIxVectors field to MPI2_IOC_INIT_REQUEST. + * Added MaxMSIxVectors field to MPI2_IOC_FACTS_REPLY. + * Added MinDevHandle field to MPI2_IOC_FACTS_REPLY. + * Added MPI2_IOCFACTS_CAPABILITY_HOST_BASED_DISCOVERY. + * Added MPI2_EVENT_HOST_BASED_DISCOVERY_PHY define. + * Added MPI2_EVENT_SAS_TOPO_ES_NO_EXPANDER define. + * Added Host Based Discovery Phy Event data. + * Added defines for ProductID Product field + * (MPI2_FW_HEADER_PID_). + * Modified values for SAS ProductID Family + * (MPI2_FW_HEADER_PID_FAMILY_). + * 02-10-10 02.00.14 Added SAS Quiesce Event structure and defines. + * Added PowerManagementControl Request structures and + * defines. + * 05-12-10 02.00.15 Marked Task Set Full Event as obsolete. + * Added MPI2_EVENT_SAS_TOPO_LR_UNSUPPORTED_PHY define. + * 11-10-10 02.00.16 Added MPI2_FW_DOWNLOAD_ITYPE_MIN_PRODUCT_SPECIFIC. + * 02-23-11 02.00.17 Added SAS NOTIFY Primitive event, and added + * SASNotifyPrimitiveMasks field to + * MPI2_EVENT_NOTIFICATION_REQUEST. + * Added Temperature Threshold Event. + * Added Host Message Event. + * Added Send Host Message request and reply. + * 05-25-11 02.00.18 For Extended Image Header, added + * MPI2_EXT_IMAGE_TYPE_MIN_PRODUCT_SPECIFIC and + * MPI2_EXT_IMAGE_TYPE_MAX_PRODUCT_SPECIFIC defines. + * Deprecated MPI2_EXT_IMAGE_TYPE_MAX define. + * 08-24-11 02.00.19 Added PhysicalPort field to + * MPI2_EVENT_DATA_SAS_DEVICE_STATUS_CHANGE structure. + * Marked MPI2_PM_CONTROL_FEATURE_PCIE_LINK as obsolete. + * 11-18-11 02.00.20 Incorporating additions for MPI v2.5. + * 03-29-12 02.00.21 Added a product specific range to event values. + * 07-26-12 02.00.22 Added MPI2_IOCFACTS_EXCEPT_PARTIAL_MEMORY_FAILURE. + * Added ElapsedSeconds field to + * MPI2_EVENT_DATA_IR_OPERATION_STATUS. + * 08-19-13 02.00.23 For IOCInit, added MPI2_IOCINIT_MSGFLAG_RDPQ_ARRAY_MODE + * and MPI2_IOC_INIT_RDPQ_ARRAY_ENTRY. + * Added MPI2_IOCFACTS_CAPABILITY_RDPQ_ARRAY_CAPABLE. + * Added MPI2_FW_DOWNLOAD_ITYPE_PUBLIC_KEY. + * Added Encrypted Hash Extended Image. + * 12-05-13 02.00.24 Added MPI25_HASH_IMAGE_TYPE_BIOS. + * 11-18-14 02.00.25 Updated copyright information. + * 03-16-15 02.00.26 Updated for MPI v2.6. + * Added MPI2_EVENT_ACTIVE_CABLE_EXCEPTION and + * MPI26_EVENT_DATA_ACTIVE_CABLE_EXCEPT. + * Added MPI26_FW_HEADER_PID_FAMILY_3324_SAS and + * MPI26_FW_HEADER_PID_FAMILY_3516_SAS. + * Added MPI26_CTRL_OP_SHUTDOWN. + * 08-25-15 02.00.27 Added IC ARCH Class based signature defines. + * Added MPI26_EVENT_PCIE_ENUM_ES_RESOURCES_EXHAUSTED event. + * Added ConigurationFlags field to IOCInit message to + * support NVMe SGL format control. + * Added PCIe SRIOV support. + * 02-17-16 02.00.28 Added SAS 4 22.5 gbs speed support. + * Added PCIe 4 16.0 GT/sec speec support. + * Removed AHCI support. + * Removed SOP support. + * 07-01-16 02.00.29 Added Archclass for 4008 product. + * Added IOCException MPI2_IOCFACTS_EXCEPT_PCIE_DISABLED + * 08-23-16 02.00.30 Added new defines for the ImageType field of FWDownload + * Request Message. + * Added new defines for the ImageType field of FWUpload + * Request Message. + * Added new values for the RegionType field in the Layout + * Data sections of the FLASH Layout Extended Image Data. + * Added new defines for the ReasonCode field of + * Active Cable Exception Event. + * Added MPI2_EVENT_ENCL_DEVICE_STATUS_CHANGE and + * MPI26_EVENT_DATA_ENCL_DEV_STATUS_CHANGE. + * 11-23-16 02.00.31 Added MPI2_EVENT_SAS_DEVICE_DISCOVERY_ERROR and + * MPI25_EVENT_DATA_SAS_DEVICE_DISCOVERY_ERROR. + * 02-02-17 02.00.32 Added MPI2_FW_DOWNLOAD_ITYPE_CBB_BACKUP. + * Added MPI25_EVENT_DATA_ACTIVE_CABLE_EXCEPT and related + * defines for the ReasonCode field. + * 06-13-17 02.00.33 Added MPI2_FW_DOWNLOAD_ITYPE_CPLD. + * 09-29-17 02.00.34 Added MPI26_EVENT_PCIDEV_STAT_RC_PCIE_HOT_RESET_FAILED + * to the ReasonCode field in PCIe Device Status Change + * Event Data. + * -------------------------------------------------------------------------- + */ + +#ifndef MPI2_IOC_H +#define MPI2_IOC_H + +/***************************************************************************** +* +* IOC Messages +* +*****************************************************************************/ + +/**************************************************************************** +* IOCInit message +****************************************************************************/ + +/*IOCInit Request message */ +typedef struct _MPI2_IOC_INIT_REQUEST { + U8 WhoInit; /*0x00 */ + U8 Reserved1; /*0x01 */ + U8 ChainOffset; /*0x02 */ + U8 Function; /*0x03 */ + U16 Reserved2; /*0x04 */ + U8 Reserved3; /*0x06 */ + U8 MsgFlags; /*0x07 */ + U8 VP_ID; /*0x08 */ + U8 VF_ID; /*0x09 */ + U16 Reserved4; /*0x0A */ + U16 MsgVersion; /*0x0C */ + U16 HeaderVersion; /*0x0E */ + U32 Reserved5; /*0x10 */ + U16 ConfigurationFlags; /* 0x14 */ + U8 HostPageSize; /*0x16 */ + U8 HostMSIxVectors; /*0x17 */ + U16 Reserved8; /*0x18 */ + U16 SystemRequestFrameSize; /*0x1A */ + U16 ReplyDescriptorPostQueueDepth; /*0x1C */ + U16 ReplyFreeQueueDepth; /*0x1E */ + U32 SenseBufferAddressHigh; /*0x20 */ + U32 SystemReplyAddressHigh; /*0x24 */ + U64 SystemRequestFrameBaseAddress; /*0x28 */ + U64 ReplyDescriptorPostQueueAddress; /*0x30 */ + U64 ReplyFreeQueueAddress; /*0x38 */ + U64 TimeStamp; /*0x40 */ +} MPI2_IOC_INIT_REQUEST, *PTR_MPI2_IOC_INIT_REQUEST, + Mpi2IOCInitRequest_t, *pMpi2IOCInitRequest_t; + +/*WhoInit values */ +#define MPI2_WHOINIT_NOT_INITIALIZED (0x00) +#define MPI2_WHOINIT_SYSTEM_BIOS (0x01) +#define MPI2_WHOINIT_ROM_BIOS (0x02) +#define MPI2_WHOINIT_PCI_PEER (0x03) +#define MPI2_WHOINIT_HOST_DRIVER (0x04) +#define MPI2_WHOINIT_MANUFACTURER (0x05) + +/* MsgFlags */ +#define MPI2_IOCINIT_MSGFLAG_RDPQ_ARRAY_MODE (0x01) + + +/*MsgVersion */ +#define MPI2_IOCINIT_MSGVERSION_MAJOR_MASK (0xFF00) +#define MPI2_IOCINIT_MSGVERSION_MAJOR_SHIFT (8) +#define MPI2_IOCINIT_MSGVERSION_MINOR_MASK (0x00FF) +#define MPI2_IOCINIT_MSGVERSION_MINOR_SHIFT (0) + +/*HeaderVersion */ +#define MPI2_IOCINIT_HDRVERSION_UNIT_MASK (0xFF00) +#define MPI2_IOCINIT_HDRVERSION_UNIT_SHIFT (8) +#define MPI2_IOCINIT_HDRVERSION_DEV_MASK (0x00FF) +#define MPI2_IOCINIT_HDRVERSION_DEV_SHIFT (0) + +/*ConfigurationFlags */ +#define MPI26_IOCINIT_CFGFLAGS_NVME_SGL_FORMAT (0x0001) + +/*minimum depth for a Reply Descriptor Post Queue */ +#define MPI2_RDPQ_DEPTH_MIN (16) + +/* Reply Descriptor Post Queue Array Entry */ +typedef struct _MPI2_IOC_INIT_RDPQ_ARRAY_ENTRY { + U64 RDPQBaseAddress; /* 0x00 */ + U32 Reserved1; /* 0x08 */ + U32 Reserved2; /* 0x0C */ +} MPI2_IOC_INIT_RDPQ_ARRAY_ENTRY, +*PTR_MPI2_IOC_INIT_RDPQ_ARRAY_ENTRY, +Mpi2IOCInitRDPQArrayEntry, *pMpi2IOCInitRDPQArrayEntry; + + +/*IOCInit Reply message */ +typedef struct _MPI2_IOC_INIT_REPLY { + U8 WhoInit; /*0x00 */ + U8 Reserved1; /*0x01 */ + U8 MsgLength; /*0x02 */ + U8 Function; /*0x03 */ + U16 Reserved2; /*0x04 */ + U8 Reserved3; /*0x06 */ + U8 MsgFlags; /*0x07 */ + U8 VP_ID; /*0x08 */ + U8 VF_ID; /*0x09 */ + U16 Reserved4; /*0x0A */ + U16 Reserved5; /*0x0C */ + U16 IOCStatus; /*0x0E */ + U32 IOCLogInfo; /*0x10 */ +} MPI2_IOC_INIT_REPLY, *PTR_MPI2_IOC_INIT_REPLY, + Mpi2IOCInitReply_t, *pMpi2IOCInitReply_t; + +/**************************************************************************** +* IOCFacts message +****************************************************************************/ + +/*IOCFacts Request message */ +typedef struct _MPI2_IOC_FACTS_REQUEST { + U16 Reserved1; /*0x00 */ + U8 ChainOffset; /*0x02 */ + U8 Function; /*0x03 */ + U16 Reserved2; /*0x04 */ + U8 Reserved3; /*0x06 */ + U8 MsgFlags; /*0x07 */ + U8 VP_ID; /*0x08 */ + U8 VF_ID; /*0x09 */ + U16 Reserved4; /*0x0A */ +} MPI2_IOC_FACTS_REQUEST, *PTR_MPI2_IOC_FACTS_REQUEST, + Mpi2IOCFactsRequest_t, *pMpi2IOCFactsRequest_t; + +/*IOCFacts Reply message */ +typedef struct _MPI2_IOC_FACTS_REPLY { + U16 MsgVersion; /*0x00 */ + U8 MsgLength; /*0x02 */ + U8 Function; /*0x03 */ + U16 HeaderVersion; /*0x04 */ + U8 IOCNumber; /*0x06 */ + U8 MsgFlags; /*0x07 */ + U8 VP_ID; /*0x08 */ + U8 VF_ID; /*0x09 */ + U16 Reserved1; /*0x0A */ + U16 IOCExceptions; /*0x0C */ + U16 IOCStatus; /*0x0E */ + U32 IOCLogInfo; /*0x10 */ + U8 MaxChainDepth; /*0x14 */ + U8 WhoInit; /*0x15 */ + U8 NumberOfPorts; /*0x16 */ + U8 MaxMSIxVectors; /*0x17 */ + U16 RequestCredit; /*0x18 */ + U16 ProductID; /*0x1A */ + U32 IOCCapabilities; /*0x1C */ + MPI2_VERSION_UNION FWVersion; /*0x20 */ + U16 IOCRequestFrameSize; /*0x24 */ + U16 IOCMaxChainSegmentSize; /*0x26 */ + U16 MaxInitiators; /*0x28 */ + U16 MaxTargets; /*0x2A */ + U16 MaxSasExpanders; /*0x2C */ + U16 MaxEnclosures; /*0x2E */ + U16 ProtocolFlags; /*0x30 */ + U16 HighPriorityCredit; /*0x32 */ + U16 MaxReplyDescriptorPostQueueDepth; /*0x34 */ + U8 ReplyFrameSize; /*0x36 */ + U8 MaxVolumes; /*0x37 */ + U16 MaxDevHandle; /*0x38 */ + U16 MaxPersistentEntries; /*0x3A */ + U16 MinDevHandle; /*0x3C */ + U8 CurrentHostPageSize; /* 0x3E */ + U8 Reserved4; /* 0x3F */ + U8 SGEModifierMask; /*0x40 */ + U8 SGEModifierValue; /*0x41 */ + U8 SGEModifierShift; /*0x42 */ + U8 Reserved5; /*0x43 */ +} MPI2_IOC_FACTS_REPLY, *PTR_MPI2_IOC_FACTS_REPLY, + Mpi2IOCFactsReply_t, *pMpi2IOCFactsReply_t; + +/*MsgVersion */ +#define MPI2_IOCFACTS_MSGVERSION_MAJOR_MASK (0xFF00) +#define MPI2_IOCFACTS_MSGVERSION_MAJOR_SHIFT (8) +#define MPI2_IOCFACTS_MSGVERSION_MINOR_MASK (0x00FF) +#define MPI2_IOCFACTS_MSGVERSION_MINOR_SHIFT (0) + +/*HeaderVersion */ +#define MPI2_IOCFACTS_HDRVERSION_UNIT_MASK (0xFF00) +#define MPI2_IOCFACTS_HDRVERSION_UNIT_SHIFT (8) +#define MPI2_IOCFACTS_HDRVERSION_DEV_MASK (0x00FF) +#define MPI2_IOCFACTS_HDRVERSION_DEV_SHIFT (0) + +/*IOCExceptions */ +#define MPI2_IOCFACTS_EXCEPT_PCIE_DISABLED (0x0400) +#define MPI2_IOCFACTS_EXCEPT_PARTIAL_MEMORY_FAILURE (0x0200) +#define MPI2_IOCFACTS_EXCEPT_IR_FOREIGN_CONFIG_MAX (0x0100) + +#define MPI2_IOCFACTS_EXCEPT_BOOTSTAT_MASK (0x00E0) +#define MPI2_IOCFACTS_EXCEPT_BOOTSTAT_GOOD (0x0000) +#define MPI2_IOCFACTS_EXCEPT_BOOTSTAT_BACKUP (0x0020) +#define MPI2_IOCFACTS_EXCEPT_BOOTSTAT_RESTORED (0x0040) +#define MPI2_IOCFACTS_EXCEPT_BOOTSTAT_CORRUPT_BACKUP (0x0060) + +#define MPI2_IOCFACTS_EXCEPT_METADATA_UNSUPPORTED (0x0010) +#define MPI2_IOCFACTS_EXCEPT_MANUFACT_CHECKSUM_FAIL (0x0008) +#define MPI2_IOCFACTS_EXCEPT_FW_CHECKSUM_FAIL (0x0004) +#define MPI2_IOCFACTS_EXCEPT_RAID_CONFIG_INVALID (0x0002) +#define MPI2_IOCFACTS_EXCEPT_CONFIG_CHECKSUM_FAIL (0x0001) + +/*defines for WhoInit field are after the IOCInit Request */ + +/*ProductID field uses MPI2_FW_HEADER_PID_ */ + +/*IOCCapabilities */ +#define MPI26_IOCFACTS_CAPABILITY_PCIE_SRIOV (0x00100000) +#define MPI26_IOCFACTS_CAPABILITY_ATOMIC_REQ (0x00080000) +#define MPI2_IOCFACTS_CAPABILITY_RDPQ_ARRAY_CAPABLE (0x00040000) +#define MPI25_IOCFACTS_CAPABILITY_FAST_PATH_CAPABLE (0x00020000) +#define MPI2_IOCFACTS_CAPABILITY_HOST_BASED_DISCOVERY (0x00010000) +#define MPI2_IOCFACTS_CAPABILITY_MSI_X_INDEX (0x00008000) +#define MPI2_IOCFACTS_CAPABILITY_RAID_ACCELERATOR (0x00004000) +#define MPI2_IOCFACTS_CAPABILITY_EVENT_REPLAY (0x00002000) +#define MPI2_IOCFACTS_CAPABILITY_INTEGRATED_RAID (0x00001000) +#define MPI2_IOCFACTS_CAPABILITY_TLR (0x00000800) +#define MPI2_IOCFACTS_CAPABILITY_MULTICAST (0x00000100) +#define MPI2_IOCFACTS_CAPABILITY_BIDIRECTIONAL_TARGET (0x00000080) +#define MPI2_IOCFACTS_CAPABILITY_EEDP (0x00000040) +#define MPI2_IOCFACTS_CAPABILITY_EXTENDED_BUFFER (0x00000020) +#define MPI2_IOCFACTS_CAPABILITY_SNAPSHOT_BUFFER (0x00000010) +#define MPI2_IOCFACTS_CAPABILITY_DIAG_TRACE_BUFFER (0x00000008) +#define MPI2_IOCFACTS_CAPABILITY_TASK_SET_FULL_HANDLING (0x00000004) + +/*ProtocolFlags */ +#define MPI2_IOCFACTS_PROTOCOL_NVME_DEVICES (0x0008) +#define MPI2_IOCFACTS_PROTOCOL_SCSI_INITIATOR (0x0002) +#define MPI2_IOCFACTS_PROTOCOL_SCSI_TARGET (0x0001) + +/**************************************************************************** +* PortFacts message +****************************************************************************/ + +/*PortFacts Request message */ +typedef struct _MPI2_PORT_FACTS_REQUEST { + U16 Reserved1; /*0x00 */ + U8 ChainOffset; /*0x02 */ + U8 Function; /*0x03 */ + U16 Reserved2; /*0x04 */ + U8 PortNumber; /*0x06 */ + U8 MsgFlags; /*0x07 */ + U8 VP_ID; /*0x08 */ + U8 VF_ID; /*0x09 */ + U16 Reserved3; /*0x0A */ +} MPI2_PORT_FACTS_REQUEST, *PTR_MPI2_PORT_FACTS_REQUEST, + Mpi2PortFactsRequest_t, *pMpi2PortFactsRequest_t; + +/*PortFacts Reply message */ +typedef struct _MPI2_PORT_FACTS_REPLY { + U16 Reserved1; /*0x00 */ + U8 MsgLength; /*0x02 */ + U8 Function; /*0x03 */ + U16 Reserved2; /*0x04 */ + U8 PortNumber; /*0x06 */ + U8 MsgFlags; /*0x07 */ + U8 VP_ID; /*0x08 */ + U8 VF_ID; /*0x09 */ + U16 Reserved3; /*0x0A */ + U16 Reserved4; /*0x0C */ + U16 IOCStatus; /*0x0E */ + U32 IOCLogInfo; /*0x10 */ + U8 Reserved5; /*0x14 */ + U8 PortType; /*0x15 */ + U16 Reserved6; /*0x16 */ + U16 MaxPostedCmdBuffers; /*0x18 */ + U16 Reserved7; /*0x1A */ +} MPI2_PORT_FACTS_REPLY, *PTR_MPI2_PORT_FACTS_REPLY, + Mpi2PortFactsReply_t, *pMpi2PortFactsReply_t; + +/*PortType values */ +#define MPI2_PORTFACTS_PORTTYPE_INACTIVE (0x00) +#define MPI2_PORTFACTS_PORTTYPE_FC (0x10) +#define MPI2_PORTFACTS_PORTTYPE_ISCSI (0x20) +#define MPI2_PORTFACTS_PORTTYPE_SAS_PHYSICAL (0x30) +#define MPI2_PORTFACTS_PORTTYPE_SAS_VIRTUAL (0x31) +#define MPI2_PORTFACTS_PORTTYPE_TRI_MODE (0x40) + + +/**************************************************************************** +* PortEnable message +****************************************************************************/ + +/*PortEnable Request message */ +typedef struct _MPI2_PORT_ENABLE_REQUEST { + U16 Reserved1; /*0x00 */ + U8 ChainOffset; /*0x02 */ + U8 Function; /*0x03 */ + U8 Reserved2; /*0x04 */ + U8 PortFlags; /*0x05 */ + U8 Reserved3; /*0x06 */ + U8 MsgFlags; /*0x07 */ + U8 VP_ID; /*0x08 */ + U8 VF_ID; /*0x09 */ + U16 Reserved4; /*0x0A */ +} MPI2_PORT_ENABLE_REQUEST, *PTR_MPI2_PORT_ENABLE_REQUEST, + Mpi2PortEnableRequest_t, *pMpi2PortEnableRequest_t; + +/*PortEnable Reply message */ +typedef struct _MPI2_PORT_ENABLE_REPLY { + U16 Reserved1; /*0x00 */ + U8 MsgLength; /*0x02 */ + U8 Function; /*0x03 */ + U8 Reserved2; /*0x04 */ + U8 PortFlags; /*0x05 */ + U8 Reserved3; /*0x06 */ + U8 MsgFlags; /*0x07 */ + U8 VP_ID; /*0x08 */ + U8 VF_ID; /*0x09 */ + U16 Reserved4; /*0x0A */ + U16 Reserved5; /*0x0C */ + U16 IOCStatus; /*0x0E */ + U32 IOCLogInfo; /*0x10 */ +} MPI2_PORT_ENABLE_REPLY, *PTR_MPI2_PORT_ENABLE_REPLY, + Mpi2PortEnableReply_t, *pMpi2PortEnableReply_t; + +/**************************************************************************** +* EventNotification message +****************************************************************************/ + +/*EventNotification Request message */ +#define MPI2_EVENT_NOTIFY_EVENTMASK_WORDS (4) + +typedef struct _MPI2_EVENT_NOTIFICATION_REQUEST { + U16 Reserved1; /*0x00 */ + U8 ChainOffset; /*0x02 */ + U8 Function; /*0x03 */ + U16 Reserved2; /*0x04 */ + U8 Reserved3; /*0x06 */ + U8 MsgFlags; /*0x07 */ + U8 VP_ID; /*0x08 */ + U8 VF_ID; /*0x09 */ + U16 Reserved4; /*0x0A */ + U32 Reserved5; /*0x0C */ + U32 Reserved6; /*0x10 */ + U32 EventMasks[MPI2_EVENT_NOTIFY_EVENTMASK_WORDS]; /*0x14 */ + U16 SASBroadcastPrimitiveMasks; /*0x24 */ + U16 SASNotifyPrimitiveMasks; /*0x26 */ + U32 Reserved8; /*0x28 */ +} MPI2_EVENT_NOTIFICATION_REQUEST, + *PTR_MPI2_EVENT_NOTIFICATION_REQUEST, + Mpi2EventNotificationRequest_t, + *pMpi2EventNotificationRequest_t; + +/*EventNotification Reply message */ +typedef struct _MPI2_EVENT_NOTIFICATION_REPLY { + U16 EventDataLength; /*0x00 */ + U8 MsgLength; /*0x02 */ + U8 Function; /*0x03 */ + U16 Reserved1; /*0x04 */ + U8 AckRequired; /*0x06 */ + U8 MsgFlags; /*0x07 */ + U8 VP_ID; /*0x08 */ + U8 VF_ID; /*0x09 */ + U16 Reserved2; /*0x0A */ + U16 Reserved3; /*0x0C */ + U16 IOCStatus; /*0x0E */ + U32 IOCLogInfo; /*0x10 */ + U16 Event; /*0x14 */ + U16 Reserved4; /*0x16 */ + U32 EventContext; /*0x18 */ + U32 EventData[1]; /*0x1C */ +} MPI2_EVENT_NOTIFICATION_REPLY, *PTR_MPI2_EVENT_NOTIFICATION_REPLY, + Mpi2EventNotificationReply_t, + *pMpi2EventNotificationReply_t; + +/*AckRequired */ +#define MPI2_EVENT_NOTIFICATION_ACK_NOT_REQUIRED (0x00) +#define MPI2_EVENT_NOTIFICATION_ACK_REQUIRED (0x01) + +/*Event */ +#define MPI2_EVENT_LOG_DATA (0x0001) +#define MPI2_EVENT_STATE_CHANGE (0x0002) +#define MPI2_EVENT_HARD_RESET_RECEIVED (0x0005) +#define MPI2_EVENT_EVENT_CHANGE (0x000A) +#define MPI2_EVENT_TASK_SET_FULL (0x000E) /*obsolete */ +#define MPI2_EVENT_SAS_DEVICE_STATUS_CHANGE (0x000F) +#define MPI2_EVENT_IR_OPERATION_STATUS (0x0014) +#define MPI2_EVENT_SAS_DISCOVERY (0x0016) +#define MPI2_EVENT_SAS_BROADCAST_PRIMITIVE (0x0017) +#define MPI2_EVENT_SAS_INIT_DEVICE_STATUS_CHANGE (0x0018) +#define MPI2_EVENT_SAS_INIT_TABLE_OVERFLOW (0x0019) +#define MPI2_EVENT_SAS_TOPOLOGY_CHANGE_LIST (0x001C) +#define MPI2_EVENT_SAS_ENCL_DEVICE_STATUS_CHANGE (0x001D) +#define MPI2_EVENT_ENCL_DEVICE_STATUS_CHANGE (0x001D) +#define MPI2_EVENT_IR_VOLUME (0x001E) +#define MPI2_EVENT_IR_PHYSICAL_DISK (0x001F) +#define MPI2_EVENT_IR_CONFIGURATION_CHANGE_LIST (0x0020) +#define MPI2_EVENT_LOG_ENTRY_ADDED (0x0021) +#define MPI2_EVENT_SAS_PHY_COUNTER (0x0022) +#define MPI2_EVENT_GPIO_INTERRUPT (0x0023) +#define MPI2_EVENT_HOST_BASED_DISCOVERY_PHY (0x0024) +#define MPI2_EVENT_SAS_QUIESCE (0x0025) +#define MPI2_EVENT_SAS_NOTIFY_PRIMITIVE (0x0026) +#define MPI2_EVENT_TEMP_THRESHOLD (0x0027) +#define MPI2_EVENT_HOST_MESSAGE (0x0028) +#define MPI2_EVENT_POWER_PERFORMANCE_CHANGE (0x0029) +#define MPI2_EVENT_PCIE_DEVICE_STATUS_CHANGE (0x0030) +#define MPI2_EVENT_PCIE_ENUMERATION (0x0031) +#define MPI2_EVENT_PCIE_TOPOLOGY_CHANGE_LIST (0x0032) +#define MPI2_EVENT_PCIE_LINK_COUNTER (0x0033) +#define MPI2_EVENT_ACTIVE_CABLE_EXCEPTION (0x0034) +#define MPI2_EVENT_SAS_DEVICE_DISCOVERY_ERROR (0x0035) +#define MPI2_EVENT_MIN_PRODUCT_SPECIFIC (0x006E) +#define MPI2_EVENT_MAX_PRODUCT_SPECIFIC (0x007F) + +/*Log Entry Added Event data */ + +/*the following structure matches MPI2_LOG_0_ENTRY in mpi2_cnfg.h */ +#define MPI2_EVENT_DATA_LOG_DATA_LENGTH (0x1C) + +typedef struct _MPI2_EVENT_DATA_LOG_ENTRY_ADDED { + U64 TimeStamp; /*0x00 */ + U32 Reserved1; /*0x08 */ + U16 LogSequence; /*0x0C */ + U16 LogEntryQualifier; /*0x0E */ + U8 VP_ID; /*0x10 */ + U8 VF_ID; /*0x11 */ + U16 Reserved2; /*0x12 */ + U8 LogData[MPI2_EVENT_DATA_LOG_DATA_LENGTH]; /*0x14 */ +} MPI2_EVENT_DATA_LOG_ENTRY_ADDED, + *PTR_MPI2_EVENT_DATA_LOG_ENTRY_ADDED, + Mpi2EventDataLogEntryAdded_t, + *pMpi2EventDataLogEntryAdded_t; + +/*GPIO Interrupt Event data */ + +typedef struct _MPI2_EVENT_DATA_GPIO_INTERRUPT { + U8 GPIONum; /*0x00 */ + U8 Reserved1; /*0x01 */ + U16 Reserved2; /*0x02 */ +} MPI2_EVENT_DATA_GPIO_INTERRUPT, + *PTR_MPI2_EVENT_DATA_GPIO_INTERRUPT, + Mpi2EventDataGpioInterrupt_t, + *pMpi2EventDataGpioInterrupt_t; + +/*Temperature Threshold Event data */ + +typedef struct _MPI2_EVENT_DATA_TEMPERATURE { + U16 Status; /*0x00 */ + U8 SensorNum; /*0x02 */ + U8 Reserved1; /*0x03 */ + U16 CurrentTemperature; /*0x04 */ + U16 Reserved2; /*0x06 */ + U32 Reserved3; /*0x08 */ + U32 Reserved4; /*0x0C */ +} MPI2_EVENT_DATA_TEMPERATURE, + *PTR_MPI2_EVENT_DATA_TEMPERATURE, + Mpi2EventDataTemperature_t, *pMpi2EventDataTemperature_t; + +/*Temperature Threshold Event data Status bits */ +#define MPI2_EVENT_TEMPERATURE3_EXCEEDED (0x0008) +#define MPI2_EVENT_TEMPERATURE2_EXCEEDED (0x0004) +#define MPI2_EVENT_TEMPERATURE1_EXCEEDED (0x0002) +#define MPI2_EVENT_TEMPERATURE0_EXCEEDED (0x0001) + +/*Host Message Event data */ + +typedef struct _MPI2_EVENT_DATA_HOST_MESSAGE { + U8 SourceVF_ID; /*0x00 */ + U8 Reserved1; /*0x01 */ + U16 Reserved2; /*0x02 */ + U32 Reserved3; /*0x04 */ + U32 HostData[1]; /*0x08 */ +} MPI2_EVENT_DATA_HOST_MESSAGE, *PTR_MPI2_EVENT_DATA_HOST_MESSAGE, + Mpi2EventDataHostMessage_t, *pMpi2EventDataHostMessage_t; + +/*Power Performance Change Event data */ + +typedef struct _MPI2_EVENT_DATA_POWER_PERF_CHANGE { + U8 CurrentPowerMode; /*0x00 */ + U8 PreviousPowerMode; /*0x01 */ + U16 Reserved1; /*0x02 */ +} MPI2_EVENT_DATA_POWER_PERF_CHANGE, + *PTR_MPI2_EVENT_DATA_POWER_PERF_CHANGE, + Mpi2EventDataPowerPerfChange_t, + *pMpi2EventDataPowerPerfChange_t; + +/*defines for CurrentPowerMode and PreviousPowerMode fields */ +#define MPI2_EVENT_PM_INIT_MASK (0xC0) +#define MPI2_EVENT_PM_INIT_UNAVAILABLE (0x00) +#define MPI2_EVENT_PM_INIT_HOST (0x40) +#define MPI2_EVENT_PM_INIT_IO_UNIT (0x80) +#define MPI2_EVENT_PM_INIT_PCIE_DPA (0xC0) + +#define MPI2_EVENT_PM_MODE_MASK (0x07) +#define MPI2_EVENT_PM_MODE_UNAVAILABLE (0x00) +#define MPI2_EVENT_PM_MODE_UNKNOWN (0x01) +#define MPI2_EVENT_PM_MODE_FULL_POWER (0x04) +#define MPI2_EVENT_PM_MODE_REDUCED_POWER (0x05) +#define MPI2_EVENT_PM_MODE_STANDBY (0x06) + +/* Active Cable Exception Event data */ + +typedef struct _MPI26_EVENT_DATA_ACTIVE_CABLE_EXCEPT { + U32 ActiveCablePowerRequirement; /* 0x00 */ + U8 ReasonCode; /* 0x04 */ + U8 ReceptacleID; /* 0x05 */ + U16 Reserved1; /* 0x06 */ +} MPI25_EVENT_DATA_ACTIVE_CABLE_EXCEPT, + *PTR_MPI25_EVENT_DATA_ACTIVE_CABLE_EXCEPT, + Mpi25EventDataActiveCableExcept_t, + *pMpi25EventDataActiveCableExcept_t, + MPI26_EVENT_DATA_ACTIVE_CABLE_EXCEPT, + *PTR_MPI26_EVENT_DATA_ACTIVE_CABLE_EXCEPT, + Mpi26EventDataActiveCableExcept_t, + *pMpi26EventDataActiveCableExcept_t; + +/*MPI2.5 defines for the ReasonCode field */ +#define MPI25_EVENT_ACTIVE_CABLE_INSUFFICIENT_POWER (0x00) +#define MPI25_EVENT_ACTIVE_CABLE_PRESENT (0x01) +#define MPI25_EVENT_ACTIVE_CABLE_DEGRADED (0x02) + +/* defines for ReasonCode field */ +#define MPI26_EVENT_ACTIVE_CABLE_INSUFFICIENT_POWER (0x00) +#define MPI26_EVENT_ACTIVE_CABLE_PRESENT (0x01) +#define MPI26_EVENT_ACTIVE_CABLE_DEGRADED (0x02) + +/*Hard Reset Received Event data */ + +typedef struct _MPI2_EVENT_DATA_HARD_RESET_RECEIVED { + U8 Reserved1; /*0x00 */ + U8 Port; /*0x01 */ + U16 Reserved2; /*0x02 */ +} MPI2_EVENT_DATA_HARD_RESET_RECEIVED, + *PTR_MPI2_EVENT_DATA_HARD_RESET_RECEIVED, + Mpi2EventDataHardResetReceived_t, + *pMpi2EventDataHardResetReceived_t; + +/*Task Set Full Event data */ +/* this event is obsolete */ + +typedef struct _MPI2_EVENT_DATA_TASK_SET_FULL { + U16 DevHandle; /*0x00 */ + U16 CurrentDepth; /*0x02 */ +} MPI2_EVENT_DATA_TASK_SET_FULL, *PTR_MPI2_EVENT_DATA_TASK_SET_FULL, + Mpi2EventDataTaskSetFull_t, *pMpi2EventDataTaskSetFull_t; + +/*SAS Device Status Change Event data */ + +typedef struct _MPI2_EVENT_DATA_SAS_DEVICE_STATUS_CHANGE { + U16 TaskTag; /*0x00 */ + U8 ReasonCode; /*0x02 */ + U8 PhysicalPort; /*0x03 */ + U8 ASC; /*0x04 */ + U8 ASCQ; /*0x05 */ + U16 DevHandle; /*0x06 */ + U32 Reserved2; /*0x08 */ + U64 SASAddress; /*0x0C */ + U8 LUN[8]; /*0x14 */ +} MPI2_EVENT_DATA_SAS_DEVICE_STATUS_CHANGE, + *PTR_MPI2_EVENT_DATA_SAS_DEVICE_STATUS_CHANGE, + Mpi2EventDataSasDeviceStatusChange_t, + *pMpi2EventDataSasDeviceStatusChange_t; + +/*SAS Device Status Change Event data ReasonCode values */ +#define MPI2_EVENT_SAS_DEV_STAT_RC_SMART_DATA (0x05) +#define MPI2_EVENT_SAS_DEV_STAT_RC_UNSUPPORTED (0x07) +#define MPI2_EVENT_SAS_DEV_STAT_RC_INTERNAL_DEVICE_RESET (0x08) +#define MPI2_EVENT_SAS_DEV_STAT_RC_TASK_ABORT_INTERNAL (0x09) +#define MPI2_EVENT_SAS_DEV_STAT_RC_ABORT_TASK_SET_INTERNAL (0x0A) +#define MPI2_EVENT_SAS_DEV_STAT_RC_CLEAR_TASK_SET_INTERNAL (0x0B) +#define MPI2_EVENT_SAS_DEV_STAT_RC_QUERY_TASK_INTERNAL (0x0C) +#define MPI2_EVENT_SAS_DEV_STAT_RC_ASYNC_NOTIFICATION (0x0D) +#define MPI2_EVENT_SAS_DEV_STAT_RC_CMP_INTERNAL_DEV_RESET (0x0E) +#define MPI2_EVENT_SAS_DEV_STAT_RC_CMP_TASK_ABORT_INTERNAL (0x0F) +#define MPI2_EVENT_SAS_DEV_STAT_RC_SATA_INIT_FAILURE (0x10) +#define MPI2_EVENT_SAS_DEV_STAT_RC_EXPANDER_REDUCED_FUNCTIONALITY (0x11) +#define MPI2_EVENT_SAS_DEV_STAT_RC_CMP_EXPANDER_REDUCED_FUNCTIONALITY (0x12) + +/*Integrated RAID Operation Status Event data */ + +typedef struct _MPI2_EVENT_DATA_IR_OPERATION_STATUS { + U16 VolDevHandle; /*0x00 */ + U16 Reserved1; /*0x02 */ + U8 RAIDOperation; /*0x04 */ + U8 PercentComplete; /*0x05 */ + U16 Reserved2; /*0x06 */ + U32 ElapsedSeconds; /*0x08 */ +} MPI2_EVENT_DATA_IR_OPERATION_STATUS, + *PTR_MPI2_EVENT_DATA_IR_OPERATION_STATUS, + Mpi2EventDataIrOperationStatus_t, + *pMpi2EventDataIrOperationStatus_t; + +/*Integrated RAID Operation Status Event data RAIDOperation values */ +#define MPI2_EVENT_IR_RAIDOP_RESYNC (0x00) +#define MPI2_EVENT_IR_RAIDOP_ONLINE_CAP_EXPANSION (0x01) +#define MPI2_EVENT_IR_RAIDOP_CONSISTENCY_CHECK (0x02) +#define MPI2_EVENT_IR_RAIDOP_BACKGROUND_INIT (0x03) +#define MPI2_EVENT_IR_RAIDOP_MAKE_DATA_CONSISTENT (0x04) + +/*Integrated RAID Volume Event data */ + +typedef struct _MPI2_EVENT_DATA_IR_VOLUME { + U16 VolDevHandle; /*0x00 */ + U8 ReasonCode; /*0x02 */ + U8 Reserved1; /*0x03 */ + U32 NewValue; /*0x04 */ + U32 PreviousValue; /*0x08 */ +} MPI2_EVENT_DATA_IR_VOLUME, *PTR_MPI2_EVENT_DATA_IR_VOLUME, + Mpi2EventDataIrVolume_t, *pMpi2EventDataIrVolume_t; + +/*Integrated RAID Volume Event data ReasonCode values */ +#define MPI2_EVENT_IR_VOLUME_RC_SETTINGS_CHANGED (0x01) +#define MPI2_EVENT_IR_VOLUME_RC_STATUS_FLAGS_CHANGED (0x02) +#define MPI2_EVENT_IR_VOLUME_RC_STATE_CHANGED (0x03) + +/*Integrated RAID Physical Disk Event data */ + +typedef struct _MPI2_EVENT_DATA_IR_PHYSICAL_DISK { + U16 Reserved1; /*0x00 */ + U8 ReasonCode; /*0x02 */ + U8 PhysDiskNum; /*0x03 */ + U16 PhysDiskDevHandle; /*0x04 */ + U16 Reserved2; /*0x06 */ + U16 Slot; /*0x08 */ + U16 EnclosureHandle; /*0x0A */ + U32 NewValue; /*0x0C */ + U32 PreviousValue; /*0x10 */ +} MPI2_EVENT_DATA_IR_PHYSICAL_DISK, + *PTR_MPI2_EVENT_DATA_IR_PHYSICAL_DISK, + Mpi2EventDataIrPhysicalDisk_t, + *pMpi2EventDataIrPhysicalDisk_t; + +/*Integrated RAID Physical Disk Event data ReasonCode values */ +#define MPI2_EVENT_IR_PHYSDISK_RC_SETTINGS_CHANGED (0x01) +#define MPI2_EVENT_IR_PHYSDISK_RC_STATUS_FLAGS_CHANGED (0x02) +#define MPI2_EVENT_IR_PHYSDISK_RC_STATE_CHANGED (0x03) + +/*Integrated RAID Configuration Change List Event data */ + +/* + *Host code (drivers, BIOS, utilities, etc.) should leave this define set to + *one and check NumElements at runtime. + */ +#ifndef MPI2_EVENT_IR_CONFIG_ELEMENT_COUNT +#define MPI2_EVENT_IR_CONFIG_ELEMENT_COUNT (1) +#endif + +typedef struct _MPI2_EVENT_IR_CONFIG_ELEMENT { + U16 ElementFlags; /*0x00 */ + U16 VolDevHandle; /*0x02 */ + U8 ReasonCode; /*0x04 */ + U8 PhysDiskNum; /*0x05 */ + U16 PhysDiskDevHandle; /*0x06 */ +} MPI2_EVENT_IR_CONFIG_ELEMENT, *PTR_MPI2_EVENT_IR_CONFIG_ELEMENT, + Mpi2EventIrConfigElement_t, *pMpi2EventIrConfigElement_t; + +/*IR Configuration Change List Event data ElementFlags values */ +#define MPI2_EVENT_IR_CHANGE_EFLAGS_ELEMENT_TYPE_MASK (0x000F) +#define MPI2_EVENT_IR_CHANGE_EFLAGS_VOLUME_ELEMENT (0x0000) +#define MPI2_EVENT_IR_CHANGE_EFLAGS_VOLPHYSDISK_ELEMENT (0x0001) +#define MPI2_EVENT_IR_CHANGE_EFLAGS_HOTSPARE_ELEMENT (0x0002) + +/*IR Configuration Change List Event data ReasonCode values */ +#define MPI2_EVENT_IR_CHANGE_RC_ADDED (0x01) +#define MPI2_EVENT_IR_CHANGE_RC_REMOVED (0x02) +#define MPI2_EVENT_IR_CHANGE_RC_NO_CHANGE (0x03) +#define MPI2_EVENT_IR_CHANGE_RC_HIDE (0x04) +#define MPI2_EVENT_IR_CHANGE_RC_UNHIDE (0x05) +#define MPI2_EVENT_IR_CHANGE_RC_VOLUME_CREATED (0x06) +#define MPI2_EVENT_IR_CHANGE_RC_VOLUME_DELETED (0x07) +#define MPI2_EVENT_IR_CHANGE_RC_PD_CREATED (0x08) +#define MPI2_EVENT_IR_CHANGE_RC_PD_DELETED (0x09) + +typedef struct _MPI2_EVENT_DATA_IR_CONFIG_CHANGE_LIST { + U8 NumElements; /*0x00 */ + U8 Reserved1; /*0x01 */ + U8 Reserved2; /*0x02 */ + U8 ConfigNum; /*0x03 */ + U32 Flags; /*0x04 */ + MPI2_EVENT_IR_CONFIG_ELEMENT + ConfigElement[MPI2_EVENT_IR_CONFIG_ELEMENT_COUNT];/*0x08 */ +} MPI2_EVENT_DATA_IR_CONFIG_CHANGE_LIST, + *PTR_MPI2_EVENT_DATA_IR_CONFIG_CHANGE_LIST, + Mpi2EventDataIrConfigChangeList_t, + *pMpi2EventDataIrConfigChangeList_t; + +/*IR Configuration Change List Event data Flags values */ +#define MPI2_EVENT_IR_CHANGE_FLAGS_FOREIGN_CONFIG (0x00000001) + +/*SAS Discovery Event data */ + +typedef struct _MPI2_EVENT_DATA_SAS_DISCOVERY { + U8 Flags; /*0x00 */ + U8 ReasonCode; /*0x01 */ + U8 PhysicalPort; /*0x02 */ + U8 Reserved1; /*0x03 */ + U32 DiscoveryStatus; /*0x04 */ +} MPI2_EVENT_DATA_SAS_DISCOVERY, + *PTR_MPI2_EVENT_DATA_SAS_DISCOVERY, + Mpi2EventDataSasDiscovery_t, *pMpi2EventDataSasDiscovery_t; + +/*SAS Discovery Event data Flags values */ +#define MPI2_EVENT_SAS_DISC_DEVICE_CHANGE (0x02) +#define MPI2_EVENT_SAS_DISC_IN_PROGRESS (0x01) + +/*SAS Discovery Event data ReasonCode values */ +#define MPI2_EVENT_SAS_DISC_RC_STARTED (0x01) +#define MPI2_EVENT_SAS_DISC_RC_COMPLETED (0x02) + +/*SAS Discovery Event data DiscoveryStatus values */ +#define MPI2_EVENT_SAS_DISC_DS_MAX_ENCLOSURES_EXCEED (0x80000000) +#define MPI2_EVENT_SAS_DISC_DS_MAX_EXPANDERS_EXCEED (0x40000000) +#define MPI2_EVENT_SAS_DISC_DS_MAX_DEVICES_EXCEED (0x20000000) +#define MPI2_EVENT_SAS_DISC_DS_MAX_TOPO_PHYS_EXCEED (0x10000000) +#define MPI2_EVENT_SAS_DISC_DS_DOWNSTREAM_INITIATOR (0x08000000) +#define MPI2_EVENT_SAS_DISC_DS_MULTI_SUBTRACTIVE_SUBTRACTIVE (0x00008000) +#define MPI2_EVENT_SAS_DISC_DS_EXP_MULTI_SUBTRACTIVE (0x00004000) +#define MPI2_EVENT_SAS_DISC_DS_MULTI_PORT_DOMAIN (0x00002000) +#define MPI2_EVENT_SAS_DISC_DS_TABLE_TO_SUBTRACTIVE_LINK (0x00001000) +#define MPI2_EVENT_SAS_DISC_DS_UNSUPPORTED_DEVICE (0x00000800) +#define MPI2_EVENT_SAS_DISC_DS_TABLE_LINK (0x00000400) +#define MPI2_EVENT_SAS_DISC_DS_SUBTRACTIVE_LINK (0x00000200) +#define MPI2_EVENT_SAS_DISC_DS_SMP_CRC_ERROR (0x00000100) +#define MPI2_EVENT_SAS_DISC_DS_SMP_FUNCTION_FAILED (0x00000080) +#define MPI2_EVENT_SAS_DISC_DS_INDEX_NOT_EXIST (0x00000040) +#define MPI2_EVENT_SAS_DISC_DS_OUT_ROUTE_ENTRIES (0x00000020) +#define MPI2_EVENT_SAS_DISC_DS_SMP_TIMEOUT (0x00000010) +#define MPI2_EVENT_SAS_DISC_DS_MULTIPLE_PORTS (0x00000004) +#define MPI2_EVENT_SAS_DISC_DS_UNADDRESSABLE_DEVICE (0x00000002) +#define MPI2_EVENT_SAS_DISC_DS_LOOP_DETECTED (0x00000001) + +/*SAS Broadcast Primitive Event data */ + +typedef struct _MPI2_EVENT_DATA_SAS_BROADCAST_PRIMITIVE { + U8 PhyNum; /*0x00 */ + U8 Port; /*0x01 */ + U8 PortWidth; /*0x02 */ + U8 Primitive; /*0x03 */ +} MPI2_EVENT_DATA_SAS_BROADCAST_PRIMITIVE, + *PTR_MPI2_EVENT_DATA_SAS_BROADCAST_PRIMITIVE, + Mpi2EventDataSasBroadcastPrimitive_t, + *pMpi2EventDataSasBroadcastPrimitive_t; + +/*defines for the Primitive field */ +#define MPI2_EVENT_PRIMITIVE_CHANGE (0x01) +#define MPI2_EVENT_PRIMITIVE_SES (0x02) +#define MPI2_EVENT_PRIMITIVE_EXPANDER (0x03) +#define MPI2_EVENT_PRIMITIVE_ASYNCHRONOUS_EVENT (0x04) +#define MPI2_EVENT_PRIMITIVE_RESERVED3 (0x05) +#define MPI2_EVENT_PRIMITIVE_RESERVED4 (0x06) +#define MPI2_EVENT_PRIMITIVE_CHANGE0_RESERVED (0x07) +#define MPI2_EVENT_PRIMITIVE_CHANGE1_RESERVED (0x08) + +/*SAS Notify Primitive Event data */ + +typedef struct _MPI2_EVENT_DATA_SAS_NOTIFY_PRIMITIVE { + U8 PhyNum; /*0x00 */ + U8 Port; /*0x01 */ + U8 Reserved1; /*0x02 */ + U8 Primitive; /*0x03 */ +} MPI2_EVENT_DATA_SAS_NOTIFY_PRIMITIVE, + *PTR_MPI2_EVENT_DATA_SAS_NOTIFY_PRIMITIVE, + Mpi2EventDataSasNotifyPrimitive_t, + *pMpi2EventDataSasNotifyPrimitive_t; + +/*defines for the Primitive field */ +#define MPI2_EVENT_NOTIFY_ENABLE_SPINUP (0x01) +#define MPI2_EVENT_NOTIFY_POWER_LOSS_EXPECTED (0x02) +#define MPI2_EVENT_NOTIFY_RESERVED1 (0x03) +#define MPI2_EVENT_NOTIFY_RESERVED2 (0x04) + +/*SAS Initiator Device Status Change Event data */ + +typedef struct _MPI2_EVENT_DATA_SAS_INIT_DEV_STATUS_CHANGE { + U8 ReasonCode; /*0x00 */ + U8 PhysicalPort; /*0x01 */ + U16 DevHandle; /*0x02 */ + U64 SASAddress; /*0x04 */ +} MPI2_EVENT_DATA_SAS_INIT_DEV_STATUS_CHANGE, + *PTR_MPI2_EVENT_DATA_SAS_INIT_DEV_STATUS_CHANGE, + Mpi2EventDataSasInitDevStatusChange_t, + *pMpi2EventDataSasInitDevStatusChange_t; + +/*SAS Initiator Device Status Change event ReasonCode values */ +#define MPI2_EVENT_SAS_INIT_RC_ADDED (0x01) +#define MPI2_EVENT_SAS_INIT_RC_NOT_RESPONDING (0x02) + +/*SAS Initiator Device Table Overflow Event data */ + +typedef struct _MPI2_EVENT_DATA_SAS_INIT_TABLE_OVERFLOW { + U16 MaxInit; /*0x00 */ + U16 CurrentInit; /*0x02 */ + U64 SASAddress; /*0x04 */ +} MPI2_EVENT_DATA_SAS_INIT_TABLE_OVERFLOW, + *PTR_MPI2_EVENT_DATA_SAS_INIT_TABLE_OVERFLOW, + Mpi2EventDataSasInitTableOverflow_t, + *pMpi2EventDataSasInitTableOverflow_t; + +/*SAS Topology Change List Event data */ + +/* + *Host code (drivers, BIOS, utilities, etc.) should leave this define set to + *one and check NumEntries at runtime. + */ +#ifndef MPI2_EVENT_SAS_TOPO_PHY_COUNT +#define MPI2_EVENT_SAS_TOPO_PHY_COUNT (1) +#endif + +typedef struct _MPI2_EVENT_SAS_TOPO_PHY_ENTRY { + U16 AttachedDevHandle; /*0x00 */ + U8 LinkRate; /*0x02 */ + U8 PhyStatus; /*0x03 */ +} MPI2_EVENT_SAS_TOPO_PHY_ENTRY, *PTR_MPI2_EVENT_SAS_TOPO_PHY_ENTRY, + Mpi2EventSasTopoPhyEntry_t, *pMpi2EventSasTopoPhyEntry_t; + +typedef struct _MPI2_EVENT_DATA_SAS_TOPOLOGY_CHANGE_LIST { + U16 EnclosureHandle; /*0x00 */ + U16 ExpanderDevHandle; /*0x02 */ + U8 NumPhys; /*0x04 */ + U8 Reserved1; /*0x05 */ + U16 Reserved2; /*0x06 */ + U8 NumEntries; /*0x08 */ + U8 StartPhyNum; /*0x09 */ + U8 ExpStatus; /*0x0A */ + U8 PhysicalPort; /*0x0B */ + MPI2_EVENT_SAS_TOPO_PHY_ENTRY + PHY[MPI2_EVENT_SAS_TOPO_PHY_COUNT]; /*0x0C */ +} MPI2_EVENT_DATA_SAS_TOPOLOGY_CHANGE_LIST, + *PTR_MPI2_EVENT_DATA_SAS_TOPOLOGY_CHANGE_LIST, + Mpi2EventDataSasTopologyChangeList_t, + *pMpi2EventDataSasTopologyChangeList_t; + +/*values for the ExpStatus field */ +#define MPI2_EVENT_SAS_TOPO_ES_NO_EXPANDER (0x00) +#define MPI2_EVENT_SAS_TOPO_ES_ADDED (0x01) +#define MPI2_EVENT_SAS_TOPO_ES_NOT_RESPONDING (0x02) +#define MPI2_EVENT_SAS_TOPO_ES_RESPONDING (0x03) +#define MPI2_EVENT_SAS_TOPO_ES_DELAY_NOT_RESPONDING (0x04) + +/*defines for the LinkRate field */ +#define MPI2_EVENT_SAS_TOPO_LR_CURRENT_MASK (0xF0) +#define MPI2_EVENT_SAS_TOPO_LR_CURRENT_SHIFT (4) +#define MPI2_EVENT_SAS_TOPO_LR_PREV_MASK (0x0F) +#define MPI2_EVENT_SAS_TOPO_LR_PREV_SHIFT (0) + +#define MPI2_EVENT_SAS_TOPO_LR_UNKNOWN_LINK_RATE (0x00) +#define MPI2_EVENT_SAS_TOPO_LR_PHY_DISABLED (0x01) +#define MPI2_EVENT_SAS_TOPO_LR_NEGOTIATION_FAILED (0x02) +#define MPI2_EVENT_SAS_TOPO_LR_SATA_OOB_COMPLETE (0x03) +#define MPI2_EVENT_SAS_TOPO_LR_PORT_SELECTOR (0x04) +#define MPI2_EVENT_SAS_TOPO_LR_SMP_RESET_IN_PROGRESS (0x05) +#define MPI2_EVENT_SAS_TOPO_LR_UNSUPPORTED_PHY (0x06) +#define MPI2_EVENT_SAS_TOPO_LR_RATE_1_5 (0x08) +#define MPI2_EVENT_SAS_TOPO_LR_RATE_3_0 (0x09) +#define MPI2_EVENT_SAS_TOPO_LR_RATE_6_0 (0x0A) +#define MPI25_EVENT_SAS_TOPO_LR_RATE_12_0 (0x0B) +#define MPI26_EVENT_SAS_TOPO_LR_RATE_22_5 (0x0C) + +/*values for the PhyStatus field */ +#define MPI2_EVENT_SAS_TOPO_PHYSTATUS_VACANT (0x80) +#define MPI2_EVENT_SAS_TOPO_PS_MULTIPLEX_CHANGE (0x10) +/*values for the PhyStatus ReasonCode sub-field */ +#define MPI2_EVENT_SAS_TOPO_RC_MASK (0x0F) +#define MPI2_EVENT_SAS_TOPO_RC_TARG_ADDED (0x01) +#define MPI2_EVENT_SAS_TOPO_RC_TARG_NOT_RESPONDING (0x02) +#define MPI2_EVENT_SAS_TOPO_RC_PHY_CHANGED (0x03) +#define MPI2_EVENT_SAS_TOPO_RC_NO_CHANGE (0x04) +#define MPI2_EVENT_SAS_TOPO_RC_DELAY_NOT_RESPONDING (0x05) + +/*SAS Enclosure Device Status Change Event data */ + +typedef struct _MPI2_EVENT_DATA_SAS_ENCL_DEV_STATUS_CHANGE { + U16 EnclosureHandle; /*0x00 */ + U8 ReasonCode; /*0x02 */ + U8 PhysicalPort; /*0x03 */ + U64 EnclosureLogicalID; /*0x04 */ + U16 NumSlots; /*0x0C */ + U16 StartSlot; /*0x0E */ + U32 PhyBits; /*0x10 */ +} MPI2_EVENT_DATA_SAS_ENCL_DEV_STATUS_CHANGE, + *PTR_MPI2_EVENT_DATA_SAS_ENCL_DEV_STATUS_CHANGE, + Mpi2EventDataSasEnclDevStatusChange_t, + *pMpi2EventDataSasEnclDevStatusChange_t, + MPI26_EVENT_DATA_ENCL_DEV_STATUS_CHANGE, + *PTR_MPI26_EVENT_DATA_ENCL_DEV_STATUS_CHANGE, + Mpi26EventDataEnclDevStatusChange_t, + *pMpi26EventDataEnclDevStatusChange_t; + +/*SAS Enclosure Device Status Change event ReasonCode values */ +#define MPI2_EVENT_SAS_ENCL_RC_ADDED (0x01) +#define MPI2_EVENT_SAS_ENCL_RC_NOT_RESPONDING (0x02) + +/*Enclosure Device Status Change event ReasonCode values */ +#define MPI26_EVENT_ENCL_RC_ADDED (0x01) +#define MPI26_EVENT_ENCL_RC_NOT_RESPONDING (0x02) + + +typedef struct _MPI25_EVENT_DATA_SAS_DEVICE_DISCOVERY_ERROR { + U16 DevHandle; /*0x00 */ + U8 ReasonCode; /*0x02 */ + U8 PhysicalPort; /*0x03 */ + U32 Reserved1[2]; /*0x04 */ + U64 SASAddress; /*0x0C */ + U32 Reserved2[2]; /*0x14 */ +} MPI25_EVENT_DATA_SAS_DEVICE_DISCOVERY_ERROR, + *PTR_MPI25_EVENT_DATA_SAS_DEVICE_DISCOVERY_ERROR, + Mpi25EventDataSasDeviceDiscoveryError_t, + *pMpi25EventDataSasDeviceDiscoveryError_t; + +/*SAS Device Discovery Error Event data ReasonCode values */ +#define MPI25_EVENT_SAS_DISC_ERR_SMP_FAILED (0x01) +#define MPI25_EVENT_SAS_DISC_ERR_SMP_TIMEOUT (0x02) + +/*SAS PHY Counter Event data */ + +typedef struct _MPI2_EVENT_DATA_SAS_PHY_COUNTER { + U64 TimeStamp; /*0x00 */ + U32 Reserved1; /*0x08 */ + U8 PhyEventCode; /*0x0C */ + U8 PhyNum; /*0x0D */ + U16 Reserved2; /*0x0E */ + U32 PhyEventInfo; /*0x10 */ + U8 CounterType; /*0x14 */ + U8 ThresholdWindow; /*0x15 */ + U8 TimeUnits; /*0x16 */ + U8 Reserved3; /*0x17 */ + U32 EventThreshold; /*0x18 */ + U16 ThresholdFlags; /*0x1C */ + U16 Reserved4; /*0x1E */ +} MPI2_EVENT_DATA_SAS_PHY_COUNTER, + *PTR_MPI2_EVENT_DATA_SAS_PHY_COUNTER, + Mpi2EventDataSasPhyCounter_t, + *pMpi2EventDataSasPhyCounter_t; + +/*use MPI2_SASPHY3_EVENT_CODE_ values from mpi2_cnfg.h + *for the PhyEventCode field */ + +/*use MPI2_SASPHY3_COUNTER_TYPE_ values from mpi2_cnfg.h + *for the CounterType field */ + +/*use MPI2_SASPHY3_TIME_UNITS_ values from mpi2_cnfg.h + *for the TimeUnits field */ + +/*use MPI2_SASPHY3_TFLAGS_ values from mpi2_cnfg.h + *for the ThresholdFlags field */ + +/*SAS Quiesce Event data */ + +typedef struct _MPI2_EVENT_DATA_SAS_QUIESCE { + U8 ReasonCode; /*0x00 */ + U8 Reserved1; /*0x01 */ + U16 Reserved2; /*0x02 */ + U32 Reserved3; /*0x04 */ +} MPI2_EVENT_DATA_SAS_QUIESCE, + *PTR_MPI2_EVENT_DATA_SAS_QUIESCE, + Mpi2EventDataSasQuiesce_t, *pMpi2EventDataSasQuiesce_t; + +/*SAS Quiesce Event data ReasonCode values */ +#define MPI2_EVENT_SAS_QUIESCE_RC_STARTED (0x01) +#define MPI2_EVENT_SAS_QUIESCE_RC_COMPLETED (0x02) + +/*Host Based Discovery Phy Event data */ + +typedef struct _MPI2_EVENT_HBD_PHY_SAS { + U8 Flags; /*0x00 */ + U8 NegotiatedLinkRate; /*0x01 */ + U8 PhyNum; /*0x02 */ + U8 PhysicalPort; /*0x03 */ + U32 Reserved1; /*0x04 */ + U8 InitialFrame[28]; /*0x08 */ +} MPI2_EVENT_HBD_PHY_SAS, *PTR_MPI2_EVENT_HBD_PHY_SAS, + Mpi2EventHbdPhySas_t, *pMpi2EventHbdPhySas_t; + +/*values for the Flags field */ +#define MPI2_EVENT_HBD_SAS_FLAGS_FRAME_VALID (0x02) +#define MPI2_EVENT_HBD_SAS_FLAGS_SATA_FRAME (0x01) + +/*use MPI2_SAS_NEG_LINK_RATE_ defines from mpi2_cnfg.h + *for the NegotiatedLinkRate field */ + +typedef union _MPI2_EVENT_HBD_DESCRIPTOR { + MPI2_EVENT_HBD_PHY_SAS Sas; +} MPI2_EVENT_HBD_DESCRIPTOR, *PTR_MPI2_EVENT_HBD_DESCRIPTOR, + Mpi2EventHbdDescriptor_t, *pMpi2EventHbdDescriptor_t; + +typedef struct _MPI2_EVENT_DATA_HBD_PHY { + U8 DescriptorType; /*0x00 */ + U8 Reserved1; /*0x01 */ + U16 Reserved2; /*0x02 */ + U32 Reserved3; /*0x04 */ + MPI2_EVENT_HBD_DESCRIPTOR Descriptor; /*0x08 */ +} MPI2_EVENT_DATA_HBD_PHY, *PTR_MPI2_EVENT_DATA_HBD_PHY, + Mpi2EventDataHbdPhy_t, + *pMpi2EventDataMpi2EventDataHbdPhy_t; + +/*values for the DescriptorType field */ +#define MPI2_EVENT_HBD_DT_SAS (0x01) + + +/*PCIe Device Status Change Event data (MPI v2.6 and later) */ + +typedef struct _MPI26_EVENT_DATA_PCIE_DEVICE_STATUS_CHANGE { + U16 TaskTag; /*0x00 */ + U8 ReasonCode; /*0x02 */ + U8 PhysicalPort; /*0x03 */ + U8 ASC; /*0x04 */ + U8 ASCQ; /*0x05 */ + U16 DevHandle; /*0x06 */ + U32 Reserved2; /*0x08 */ + U64 WWID; /*0x0C */ + U8 LUN[8]; /*0x14 */ +} MPI26_EVENT_DATA_PCIE_DEVICE_STATUS_CHANGE, + *PTR_MPI26_EVENT_DATA_PCIE_DEVICE_STATUS_CHANGE, + Mpi26EventDataPCIeDeviceStatusChange_t, + *pMpi26EventDataPCIeDeviceStatusChange_t; + +/*PCIe Device Status Change Event data ReasonCode values */ +#define MPI26_EVENT_PCIDEV_STAT_RC_SMART_DATA (0x05) +#define MPI26_EVENT_PCIDEV_STAT_RC_UNSUPPORTED (0x07) +#define MPI26_EVENT_PCIDEV_STAT_RC_INTERNAL_DEVICE_RESET (0x08) +#define MPI26_EVENT_PCIDEV_STAT_RC_TASK_ABORT_INTERNAL (0x09) +#define MPI26_EVENT_PCIDEV_STAT_RC_ABORT_TASK_SET_INTERNAL (0x0A) +#define MPI26_EVENT_PCIDEV_STAT_RC_CLEAR_TASK_SET_INTERNAL (0x0B) +#define MPI26_EVENT_PCIDEV_STAT_RC_QUERY_TASK_INTERNAL (0x0C) +#define MPI26_EVENT_PCIDEV_STAT_RC_ASYNC_NOTIFICATION (0x0D) +#define MPI26_EVENT_PCIDEV_STAT_RC_CMP_INTERNAL_DEV_RESET (0x0E) +#define MPI26_EVENT_PCIDEV_STAT_RC_CMP_TASK_ABORT_INTERNAL (0x0F) +#define MPI26_EVENT_PCIDEV_STAT_RC_DEV_INIT_FAILURE (0x10) +#define MPI26_EVENT_PCIDEV_STAT_RC_PCIE_HOT_RESET_FAILED (0x11) + + +/*PCIe Enumeration Event data (MPI v2.6 and later) */ + +typedef struct _MPI26_EVENT_DATA_PCIE_ENUMERATION { + U8 Flags; /*0x00 */ + U8 ReasonCode; /*0x01 */ + U8 PhysicalPort; /*0x02 */ + U8 Reserved1; /*0x03 */ + U32 EnumerationStatus; /*0x04 */ +} MPI26_EVENT_DATA_PCIE_ENUMERATION, + *PTR_MPI26_EVENT_DATA_PCIE_ENUMERATION, + Mpi26EventDataPCIeEnumeration_t, + *pMpi26EventDataPCIeEnumeration_t; + +/*PCIe Enumeration Event data Flags values */ +#define MPI26_EVENT_PCIE_ENUM_DEVICE_CHANGE (0x02) +#define MPI26_EVENT_PCIE_ENUM_IN_PROGRESS (0x01) + +/*PCIe Enumeration Event data ReasonCode values */ +#define MPI26_EVENT_PCIE_ENUM_RC_STARTED (0x01) +#define MPI26_EVENT_PCIE_ENUM_RC_COMPLETED (0x02) + +/*PCIe Enumeration Event data EnumerationStatus values */ +#define MPI26_EVENT_PCIE_ENUM_ES_MAX_SWITCHES_EXCEED (0x40000000) +#define MPI26_EVENT_PCIE_ENUM_ES_MAX_DEVICES_EXCEED (0x20000000) +#define MPI26_EVENT_PCIE_ENUM_ES_RESOURCES_EXHAUSTED (0x10000000) + + +/*PCIe Topology Change List Event data (MPI v2.6 and later) */ + +/* + *Host code (drivers, BIOS, utilities, etc.) should leave this define set to + *one and check NumEntries at runtime. + */ +#ifndef MPI26_EVENT_PCIE_TOPO_PORT_COUNT +#define MPI26_EVENT_PCIE_TOPO_PORT_COUNT (1) +#endif + +typedef struct _MPI26_EVENT_PCIE_TOPO_PORT_ENTRY { + U16 AttachedDevHandle; /*0x00 */ + U8 PortStatus; /*0x02 */ + U8 Reserved1; /*0x03 */ + U8 CurrentPortInfo; /*0x04 */ + U8 Reserved2; /*0x05 */ + U8 PreviousPortInfo; /*0x06 */ + U8 Reserved3; /*0x07 */ +} MPI26_EVENT_PCIE_TOPO_PORT_ENTRY, + *PTR_MPI26_EVENT_PCIE_TOPO_PORT_ENTRY, + Mpi26EventPCIeTopoPortEntry_t, + *pMpi26EventPCIeTopoPortEntry_t; + +/*PCIe Topology Change List Event data PortStatus values */ +#define MPI26_EVENT_PCIE_TOPO_PS_DEV_ADDED (0x01) +#define MPI26_EVENT_PCIE_TOPO_PS_NOT_RESPONDING (0x02) +#define MPI26_EVENT_PCIE_TOPO_PS_PORT_CHANGED (0x03) +#define MPI26_EVENT_PCIE_TOPO_PS_NO_CHANGE (0x04) +#define MPI26_EVENT_PCIE_TOPO_PS_DELAY_NOT_RESPONDING (0x05) + +/*PCIe Topology Change List Event data defines for CurrentPortInfo and + *PreviousPortInfo + */ +#define MPI26_EVENT_PCIE_TOPO_PI_LANE_MASK (0xF0) +#define MPI26_EVENT_PCIE_TOPO_PI_LANES_UNKNOWN (0x00) +#define MPI26_EVENT_PCIE_TOPO_PI_1_LANE (0x10) +#define MPI26_EVENT_PCIE_TOPO_PI_2_LANES (0x20) +#define MPI26_EVENT_PCIE_TOPO_PI_4_LANES (0x30) +#define MPI26_EVENT_PCIE_TOPO_PI_8_LANES (0x40) + +#define MPI26_EVENT_PCIE_TOPO_PI_RATE_MASK (0x0F) +#define MPI26_EVENT_PCIE_TOPO_PI_RATE_UNKNOWN (0x00) +#define MPI26_EVENT_PCIE_TOPO_PI_RATE_DISABLED (0x01) +#define MPI26_EVENT_PCIE_TOPO_PI_RATE_2_5 (0x02) +#define MPI26_EVENT_PCIE_TOPO_PI_RATE_5_0 (0x03) +#define MPI26_EVENT_PCIE_TOPO_PI_RATE_8_0 (0x04) +#define MPI26_EVENT_PCIE_TOPO_PI_RATE_16_0 (0x05) + +typedef struct _MPI26_EVENT_DATA_PCIE_TOPOLOGY_CHANGE_LIST { + U16 EnclosureHandle; /*0x00 */ + U16 SwitchDevHandle; /*0x02 */ + U8 NumPorts; /*0x04 */ + U8 Reserved1; /*0x05 */ + U16 Reserved2; /*0x06 */ + U8 NumEntries; /*0x08 */ + U8 StartPortNum; /*0x09 */ + U8 SwitchStatus; /*0x0A */ + U8 PhysicalPort; /*0x0B */ + MPI26_EVENT_PCIE_TOPO_PORT_ENTRY + PortEntry[MPI26_EVENT_PCIE_TOPO_PORT_COUNT]; /*0x0C */ +} MPI26_EVENT_DATA_PCIE_TOPOLOGY_CHANGE_LIST, + *PTR_MPI26_EVENT_DATA_PCIE_TOPOLOGY_CHANGE_LIST, + Mpi26EventDataPCIeTopologyChangeList_t, + *pMpi26EventDataPCIeTopologyChangeList_t; + +/*PCIe Topology Change List Event data SwitchStatus values */ +#define MPI26_EVENT_PCIE_TOPO_SS_NO_PCIE_SWITCH (0x00) +#define MPI26_EVENT_PCIE_TOPO_SS_ADDED (0x01) +#define MPI26_EVENT_PCIE_TOPO_SS_NOT_RESPONDING (0x02) +#define MPI26_EVENT_PCIE_TOPO_SS_RESPONDING (0x03) +#define MPI26_EVENT_PCIE_TOPO_SS_DELAY_NOT_RESPONDING (0x04) + +/*PCIe Link Counter Event data (MPI v2.6 and later) */ + +typedef struct _MPI26_EVENT_DATA_PCIE_LINK_COUNTER { + U64 TimeStamp; /*0x00 */ + U32 Reserved1; /*0x08 */ + U8 LinkEventCode; /*0x0C */ + U8 LinkNum; /*0x0D */ + U16 Reserved2; /*0x0E */ + U32 LinkEventInfo; /*0x10 */ + U8 CounterType; /*0x14 */ + U8 ThresholdWindow; /*0x15 */ + U8 TimeUnits; /*0x16 */ + U8 Reserved3; /*0x17 */ + U32 EventThreshold; /*0x18 */ + U16 ThresholdFlags; /*0x1C */ + U16 Reserved4; /*0x1E */ +} MPI26_EVENT_DATA_PCIE_LINK_COUNTER, + *PTR_MPI26_EVENT_DATA_PCIE_LINK_COUNTER, + Mpi26EventDataPcieLinkCounter_t, *pMpi26EventDataPcieLinkCounter_t; + + +/*use MPI26_PCIELINK3_EVTCODE_ values from mpi2_cnfg.h for the LinkEventCode + *field + */ + +/*use MPI26_PCIELINK3_COUNTER_TYPE_ values from mpi2_cnfg.h for the CounterType + *field + */ + +/*use MPI26_PCIELINK3_TIME_UNITS_ values from mpi2_cnfg.h for the TimeUnits + *field + */ + +/*use MPI26_PCIELINK3_TFLAGS_ values from mpi2_cnfg.h for the ThresholdFlags + *field + */ + +/**************************************************************************** +* EventAck message +****************************************************************************/ + +/*EventAck Request message */ +typedef struct _MPI2_EVENT_ACK_REQUEST { + U16 Reserved1; /*0x00 */ + U8 ChainOffset; /*0x02 */ + U8 Function; /*0x03 */ + U16 Reserved2; /*0x04 */ + U8 Reserved3; /*0x06 */ + U8 MsgFlags; /*0x07 */ + U8 VP_ID; /*0x08 */ + U8 VF_ID; /*0x09 */ + U16 Reserved4; /*0x0A */ + U16 Event; /*0x0C */ + U16 Reserved5; /*0x0E */ + U32 EventContext; /*0x10 */ +} MPI2_EVENT_ACK_REQUEST, *PTR_MPI2_EVENT_ACK_REQUEST, + Mpi2EventAckRequest_t, *pMpi2EventAckRequest_t; + +/*EventAck Reply message */ +typedef struct _MPI2_EVENT_ACK_REPLY { + U16 Reserved1; /*0x00 */ + U8 MsgLength; /*0x02 */ + U8 Function; /*0x03 */ + U16 Reserved2; /*0x04 */ + U8 Reserved3; /*0x06 */ + U8 MsgFlags; /*0x07 */ + U8 VP_ID; /*0x08 */ + U8 VF_ID; /*0x09 */ + U16 Reserved4; /*0x0A */ + U16 Reserved5; /*0x0C */ + U16 IOCStatus; /*0x0E */ + U32 IOCLogInfo; /*0x10 */ +} MPI2_EVENT_ACK_REPLY, *PTR_MPI2_EVENT_ACK_REPLY, + Mpi2EventAckReply_t, *pMpi2EventAckReply_t; + +/**************************************************************************** +* SendHostMessage message +****************************************************************************/ + +/*SendHostMessage Request message */ +typedef struct _MPI2_SEND_HOST_MESSAGE_REQUEST { + U16 HostDataLength; /*0x00 */ + U8 ChainOffset; /*0x02 */ + U8 Function; /*0x03 */ + U16 Reserved1; /*0x04 */ + U8 Reserved2; /*0x06 */ + U8 MsgFlags; /*0x07 */ + U8 VP_ID; /*0x08 */ + U8 VF_ID; /*0x09 */ + U16 Reserved3; /*0x0A */ + U8 Reserved4; /*0x0C */ + U8 DestVF_ID; /*0x0D */ + U16 Reserved5; /*0x0E */ + U32 Reserved6; /*0x10 */ + U32 Reserved7; /*0x14 */ + U32 Reserved8; /*0x18 */ + U32 Reserved9; /*0x1C */ + U32 Reserved10; /*0x20 */ + U32 HostData[1]; /*0x24 */ +} MPI2_SEND_HOST_MESSAGE_REQUEST, + *PTR_MPI2_SEND_HOST_MESSAGE_REQUEST, + Mpi2SendHostMessageRequest_t, + *pMpi2SendHostMessageRequest_t; + +/*SendHostMessage Reply message */ +typedef struct _MPI2_SEND_HOST_MESSAGE_REPLY { + U16 HostDataLength; /*0x00 */ + U8 MsgLength; /*0x02 */ + U8 Function; /*0x03 */ + U16 Reserved1; /*0x04 */ + U8 Reserved2; /*0x06 */ + U8 MsgFlags; /*0x07 */ + U8 VP_ID; /*0x08 */ + U8 VF_ID; /*0x09 */ + U16 Reserved3; /*0x0A */ + U16 Reserved4; /*0x0C */ + U16 IOCStatus; /*0x0E */ + U32 IOCLogInfo; /*0x10 */ +} MPI2_SEND_HOST_MESSAGE_REPLY, *PTR_MPI2_SEND_HOST_MESSAGE_REPLY, + Mpi2SendHostMessageReply_t, *pMpi2SendHostMessageReply_t; + +/**************************************************************************** +* FWDownload message +****************************************************************************/ + +/*MPI v2.0 FWDownload Request message */ +typedef struct _MPI2_FW_DOWNLOAD_REQUEST { + U8 ImageType; /*0x00 */ + U8 Reserved1; /*0x01 */ + U8 ChainOffset; /*0x02 */ + U8 Function; /*0x03 */ + U16 Reserved2; /*0x04 */ + U8 Reserved3; /*0x06 */ + U8 MsgFlags; /*0x07 */ + U8 VP_ID; /*0x08 */ + U8 VF_ID; /*0x09 */ + U16 Reserved4; /*0x0A */ + U32 TotalImageSize; /*0x0C */ + U32 Reserved5; /*0x10 */ + MPI2_MPI_SGE_UNION SGL; /*0x14 */ +} MPI2_FW_DOWNLOAD_REQUEST, *PTR_MPI2_FW_DOWNLOAD_REQUEST, + Mpi2FWDownloadRequest, *pMpi2FWDownloadRequest; + +#define MPI2_FW_DOWNLOAD_MSGFLGS_LAST_SEGMENT (0x01) + +#define MPI2_FW_DOWNLOAD_ITYPE_FW (0x01) +#define MPI2_FW_DOWNLOAD_ITYPE_BIOS (0x02) +#define MPI2_FW_DOWNLOAD_ITYPE_MANUFACTURING (0x06) +#define MPI2_FW_DOWNLOAD_ITYPE_CONFIG_1 (0x07) +#define MPI2_FW_DOWNLOAD_ITYPE_CONFIG_2 (0x08) +#define MPI2_FW_DOWNLOAD_ITYPE_MEGARAID (0x09) +#define MPI2_FW_DOWNLOAD_ITYPE_COMPLETE (0x0A) +#define MPI2_FW_DOWNLOAD_ITYPE_COMMON_BOOT_BLOCK (0x0B) +#define MPI2_FW_DOWNLOAD_ITYPE_PUBLIC_KEY (0x0C) +#define MPI2_FW_DOWNLOAD_ITYPE_CBB_BACKUP (0x0D) +#define MPI2_FW_DOWNLOAD_ITYPE_SBR (0x0E) +#define MPI2_FW_DOWNLOAD_ITYPE_SBR_BACKUP (0x0F) +#define MPI2_FW_DOWNLOAD_ITYPE_HIIM (0x10) +#define MPI2_FW_DOWNLOAD_ITYPE_HIIA (0x11) +#define MPI2_FW_DOWNLOAD_ITYPE_CTLR (0x12) +#define MPI2_FW_DOWNLOAD_ITYPE_IMR_FIRMWARE (0x13) +#define MPI2_FW_DOWNLOAD_ITYPE_MR_NVDATA (0x14) +#define MPI2_FW_DOWNLOAD_ITYPE_MIN_PRODUCT_SPECIFIC (0xF0) + +/*MPI v2.0 FWDownload TransactionContext Element */ +typedef struct _MPI2_FW_DOWNLOAD_TCSGE { + U8 Reserved1; /*0x00 */ + U8 ContextSize; /*0x01 */ + U8 DetailsLength; /*0x02 */ + U8 Flags; /*0x03 */ + U32 Reserved2; /*0x04 */ + U32 ImageOffset; /*0x08 */ + U32 ImageSize; /*0x0C */ +} MPI2_FW_DOWNLOAD_TCSGE, *PTR_MPI2_FW_DOWNLOAD_TCSGE, + Mpi2FWDownloadTCSGE_t, *pMpi2FWDownloadTCSGE_t; + +/*MPI v2.5 FWDownload Request message */ +typedef struct _MPI25_FW_DOWNLOAD_REQUEST { + U8 ImageType; /*0x00 */ + U8 Reserved1; /*0x01 */ + U8 ChainOffset; /*0x02 */ + U8 Function; /*0x03 */ + U16 Reserved2; /*0x04 */ + U8 Reserved3; /*0x06 */ + U8 MsgFlags; /*0x07 */ + U8 VP_ID; /*0x08 */ + U8 VF_ID; /*0x09 */ + U16 Reserved4; /*0x0A */ + U32 TotalImageSize; /*0x0C */ + U32 Reserved5; /*0x10 */ + U32 Reserved6; /*0x14 */ + U32 ImageOffset; /*0x18 */ + U32 ImageSize; /*0x1C */ + MPI25_SGE_IO_UNION SGL; /*0x20 */ +} MPI25_FW_DOWNLOAD_REQUEST, *PTR_MPI25_FW_DOWNLOAD_REQUEST, + Mpi25FWDownloadRequest, *pMpi25FWDownloadRequest; + +/*FWDownload Reply message */ +typedef struct _MPI2_FW_DOWNLOAD_REPLY { + U8 ImageType; /*0x00 */ + U8 Reserved1; /*0x01 */ + U8 MsgLength; /*0x02 */ + U8 Function; /*0x03 */ + U16 Reserved2; /*0x04 */ + U8 Reserved3; /*0x06 */ + U8 MsgFlags; /*0x07 */ + U8 VP_ID; /*0x08 */ + U8 VF_ID; /*0x09 */ + U16 Reserved4; /*0x0A */ + U16 Reserved5; /*0x0C */ + U16 IOCStatus; /*0x0E */ + U32 IOCLogInfo; /*0x10 */ +} MPI2_FW_DOWNLOAD_REPLY, *PTR_MPI2_FW_DOWNLOAD_REPLY, + Mpi2FWDownloadReply_t, *pMpi2FWDownloadReply_t; + +/**************************************************************************** +* FWUpload message +****************************************************************************/ + +/*MPI v2.0 FWUpload Request message */ +typedef struct _MPI2_FW_UPLOAD_REQUEST { + U8 ImageType; /*0x00 */ + U8 Reserved1; /*0x01 */ + U8 ChainOffset; /*0x02 */ + U8 Function; /*0x03 */ + U16 Reserved2; /*0x04 */ + U8 Reserved3; /*0x06 */ + U8 MsgFlags; /*0x07 */ + U8 VP_ID; /*0x08 */ + U8 VF_ID; /*0x09 */ + U16 Reserved4; /*0x0A */ + U32 Reserved5; /*0x0C */ + U32 Reserved6; /*0x10 */ + MPI2_MPI_SGE_UNION SGL; /*0x14 */ +} MPI2_FW_UPLOAD_REQUEST, *PTR_MPI2_FW_UPLOAD_REQUEST, + Mpi2FWUploadRequest_t, *pMpi2FWUploadRequest_t; + +#define MPI2_FW_UPLOAD_ITYPE_FW_CURRENT (0x00) +#define MPI2_FW_UPLOAD_ITYPE_FW_FLASH (0x01) +#define MPI2_FW_UPLOAD_ITYPE_BIOS_FLASH (0x02) +#define MPI2_FW_UPLOAD_ITYPE_FW_BACKUP (0x05) +#define MPI2_FW_UPLOAD_ITYPE_MANUFACTURING (0x06) +#define MPI2_FW_UPLOAD_ITYPE_CONFIG_1 (0x07) +#define MPI2_FW_UPLOAD_ITYPE_CONFIG_2 (0x08) +#define MPI2_FW_UPLOAD_ITYPE_MEGARAID (0x09) +#define MPI2_FW_UPLOAD_ITYPE_COMPLETE (0x0A) +#define MPI2_FW_UPLOAD_ITYPE_COMMON_BOOT_BLOCK (0x0B) +#define MPI2_FW_UPLOAD_ITYPE_CBB_BACKUP (0x0D) +#define MPI2_FW_UPLOAD_ITYPE_SBR (0x0E) +#define MPI2_FW_UPLOAD_ITYPE_SBR_BACKUP (0x0F) +#define MPI2_FW_UPLOAD_ITYPE_HIIM (0x10) +#define MPI2_FW_UPLOAD_ITYPE_HIIA (0x11) +#define MPI2_FW_UPLOAD_ITYPE_CTLR (0x12) +#define MPI2_FW_UPLOAD_ITYPE_IMR_FIRMWARE (0x13) +#define MPI2_FW_UPLOAD_ITYPE_MR_NVDATA (0x14) + + +/*MPI v2.0 FWUpload TransactionContext Element */ +typedef struct _MPI2_FW_UPLOAD_TCSGE { + U8 Reserved1; /*0x00 */ + U8 ContextSize; /*0x01 */ + U8 DetailsLength; /*0x02 */ + U8 Flags; /*0x03 */ + U32 Reserved2; /*0x04 */ + U32 ImageOffset; /*0x08 */ + U32 ImageSize; /*0x0C */ +} MPI2_FW_UPLOAD_TCSGE, *PTR_MPI2_FW_UPLOAD_TCSGE, + Mpi2FWUploadTCSGE_t, *pMpi2FWUploadTCSGE_t; + +/*MPI v2.5 FWUpload Request message */ +typedef struct _MPI25_FW_UPLOAD_REQUEST { + U8 ImageType; /*0x00 */ + U8 Reserved1; /*0x01 */ + U8 ChainOffset; /*0x02 */ + U8 Function; /*0x03 */ + U16 Reserved2; /*0x04 */ + U8 Reserved3; /*0x06 */ + U8 MsgFlags; /*0x07 */ + U8 VP_ID; /*0x08 */ + U8 VF_ID; /*0x09 */ + U16 Reserved4; /*0x0A */ + U32 Reserved5; /*0x0C */ + U32 Reserved6; /*0x10 */ + U32 Reserved7; /*0x14 */ + U32 ImageOffset; /*0x18 */ + U32 ImageSize; /*0x1C */ + MPI25_SGE_IO_UNION SGL; /*0x20 */ +} MPI25_FW_UPLOAD_REQUEST, *PTR_MPI25_FW_UPLOAD_REQUEST, + Mpi25FWUploadRequest_t, *pMpi25FWUploadRequest_t; + +/*FWUpload Reply message */ +typedef struct _MPI2_FW_UPLOAD_REPLY { + U8 ImageType; /*0x00 */ + U8 Reserved1; /*0x01 */ + U8 MsgLength; /*0x02 */ + U8 Function; /*0x03 */ + U16 Reserved2; /*0x04 */ + U8 Reserved3; /*0x06 */ + U8 MsgFlags; /*0x07 */ + U8 VP_ID; /*0x08 */ + U8 VF_ID; /*0x09 */ + U16 Reserved4; /*0x0A */ + U16 Reserved5; /*0x0C */ + U16 IOCStatus; /*0x0E */ + U32 IOCLogInfo; /*0x10 */ + U32 ActualImageSize; /*0x14 */ +} MPI2_FW_UPLOAD_REPLY, *PTR_MPI2_FW_UPLOAD_REPLY, + Mpi2FWUploadReply_t, *pMPi2FWUploadReply_t; + +/*FW Image Header */ +typedef struct _MPI2_FW_IMAGE_HEADER { + U32 Signature; /*0x00 */ + U32 Signature0; /*0x04 */ + U32 Signature1; /*0x08 */ + U32 Signature2; /*0x0C */ + MPI2_VERSION_UNION MPIVersion; /*0x10 */ + MPI2_VERSION_UNION FWVersion; /*0x14 */ + MPI2_VERSION_UNION NVDATAVersion; /*0x18 */ + MPI2_VERSION_UNION PackageVersion; /*0x1C */ + U16 VendorID; /*0x20 */ + U16 ProductID; /*0x22 */ + U16 ProtocolFlags; /*0x24 */ + U16 Reserved26; /*0x26 */ + U32 IOCCapabilities; /*0x28 */ + U32 ImageSize; /*0x2C */ + U32 NextImageHeaderOffset; /*0x30 */ + U32 Checksum; /*0x34 */ + U32 Reserved38; /*0x38 */ + U32 Reserved3C; /*0x3C */ + U32 Reserved40; /*0x40 */ + U32 Reserved44; /*0x44 */ + U32 Reserved48; /*0x48 */ + U32 Reserved4C; /*0x4C */ + U32 Reserved50; /*0x50 */ + U32 Reserved54; /*0x54 */ + U32 Reserved58; /*0x58 */ + U32 Reserved5C; /*0x5C */ + U32 BootFlags; /*0x60 */ + U32 FirmwareVersionNameWhat; /*0x64 */ + U8 FirmwareVersionName[32]; /*0x68 */ + U32 VendorNameWhat; /*0x88 */ + U8 VendorName[32]; /*0x8C */ + U32 PackageNameWhat; /*0x88 */ + U8 PackageName[32]; /*0x8C */ + U32 ReservedD0; /*0xD0 */ + U32 ReservedD4; /*0xD4 */ + U32 ReservedD8; /*0xD8 */ + U32 ReservedDC; /*0xDC */ + U32 ReservedE0; /*0xE0 */ + U32 ReservedE4; /*0xE4 */ + U32 ReservedE8; /*0xE8 */ + U32 ReservedEC; /*0xEC */ + U32 ReservedF0; /*0xF0 */ + U32 ReservedF4; /*0xF4 */ + U32 ReservedF8; /*0xF8 */ + U32 ReservedFC; /*0xFC */ +} MPI2_FW_IMAGE_HEADER, *PTR_MPI2_FW_IMAGE_HEADER, + Mpi2FWImageHeader_t, *pMpi2FWImageHeader_t; + +/*Signature field */ +#define MPI2_FW_HEADER_SIGNATURE_OFFSET (0x00) +#define MPI2_FW_HEADER_SIGNATURE_MASK (0xFF000000) +#define MPI2_FW_HEADER_SIGNATURE (0xEA000000) +#define MPI26_FW_HEADER_SIGNATURE (0xEB000000) + +/*Signature0 field */ +#define MPI2_FW_HEADER_SIGNATURE0_OFFSET (0x04) +#define MPI2_FW_HEADER_SIGNATURE0 (0x5AFAA55A) +/* Last byte is defined by architecture */ +#define MPI26_FW_HEADER_SIGNATURE0_BASE (0x5AEAA500) +#define MPI26_FW_HEADER_SIGNATURE0_ARC_0 (0x5A) +#define MPI26_FW_HEADER_SIGNATURE0_ARC_1 (0x00) +#define MPI26_FW_HEADER_SIGNATURE0_ARC_2 (0x01) +/* legacy (0x5AEAA55A) */ +#define MPI26_FW_HEADER_SIGNATURE0_ARC_3 (0x02) +#define MPI26_FW_HEADER_SIGNATURE0 \ + (MPI26_FW_HEADER_SIGNATURE0_BASE+MPI26_FW_HEADER_SIGNATURE0_ARC_0) +#define MPI26_FW_HEADER_SIGNATURE0_3516 \ + (MPI26_FW_HEADER_SIGNATURE0_BASE+MPI26_FW_HEADER_SIGNATURE0_ARC_1) +#define MPI26_FW_HEADER_SIGNATURE0_4008 \ + (MPI26_FW_HEADER_SIGNATURE0_BASE+MPI26_FW_HEADER_SIGNATURE0_ARC_3) + +/*Signature1 field */ +#define MPI2_FW_HEADER_SIGNATURE1_OFFSET (0x08) +#define MPI2_FW_HEADER_SIGNATURE1 (0xA55AFAA5) +#define MPI26_FW_HEADER_SIGNATURE1 (0xA55AEAA5) + +/*Signature2 field */ +#define MPI2_FW_HEADER_SIGNATURE2_OFFSET (0x0C) +#define MPI2_FW_HEADER_SIGNATURE2 (0x5AA55AFA) +#define MPI26_FW_HEADER_SIGNATURE2 (0x5AA55AEA) + +/*defines for using the ProductID field */ +#define MPI2_FW_HEADER_PID_TYPE_MASK (0xF000) +#define MPI2_FW_HEADER_PID_TYPE_SAS (0x2000) + +#define MPI2_FW_HEADER_PID_PROD_MASK (0x0F00) +#define MPI2_FW_HEADER_PID_PROD_A (0x0000) +#define MPI2_FW_HEADER_PID_PROD_TARGET_INITIATOR_SCSI (0x0200) +#define MPI2_FW_HEADER_PID_PROD_IR_SCSI (0x0700) + +#define MPI2_FW_HEADER_PID_FAMILY_MASK (0x00FF) +/*SAS ProductID Family bits */ +#define MPI2_FW_HEADER_PID_FAMILY_2108_SAS (0x0013) +#define MPI2_FW_HEADER_PID_FAMILY_2208_SAS (0x0014) +#define MPI25_FW_HEADER_PID_FAMILY_3108_SAS (0x0021) +#define MPI26_FW_HEADER_PID_FAMILY_3324_SAS (0x0028) +#define MPI26_FW_HEADER_PID_FAMILY_3516_SAS (0x0031) + +/*use MPI2_IOCFACTS_PROTOCOL_ defines for ProtocolFlags field */ + +/*use MPI2_IOCFACTS_CAPABILITY_ defines for IOCCapabilities field */ + +#define MPI2_FW_HEADER_IMAGESIZE_OFFSET (0x2C) +#define MPI2_FW_HEADER_NEXTIMAGE_OFFSET (0x30) +#define MPI26_FW_HEADER_BOOTFLAGS_OFFSET (0x60) +#define MPI2_FW_HEADER_VERNMHWAT_OFFSET (0x64) + +#define MPI2_FW_HEADER_WHAT_SIGNATURE (0x29232840) + +#define MPI2_FW_HEADER_SIZE (0x100) + +/*Extended Image Header */ +typedef struct _MPI2_EXT_IMAGE_HEADER { + U8 ImageType; /*0x00 */ + U8 Reserved1; /*0x01 */ + U16 Reserved2; /*0x02 */ + U32 Checksum; /*0x04 */ + U32 ImageSize; /*0x08 */ + U32 NextImageHeaderOffset; /*0x0C */ + U32 PackageVersion; /*0x10 */ + U32 Reserved3; /*0x14 */ + U32 Reserved4; /*0x18 */ + U32 Reserved5; /*0x1C */ + U8 IdentifyString[32]; /*0x20 */ +} MPI2_EXT_IMAGE_HEADER, *PTR_MPI2_EXT_IMAGE_HEADER, + Mpi2ExtImageHeader_t, *pMpi2ExtImageHeader_t; + +/*useful offsets */ +#define MPI2_EXT_IMAGE_IMAGETYPE_OFFSET (0x00) +#define MPI2_EXT_IMAGE_IMAGESIZE_OFFSET (0x08) +#define MPI2_EXT_IMAGE_NEXTIMAGE_OFFSET (0x0C) + +#define MPI2_EXT_IMAGE_HEADER_SIZE (0x40) + +/*defines for the ImageType field */ +#define MPI2_EXT_IMAGE_TYPE_UNSPECIFIED (0x00) +#define MPI2_EXT_IMAGE_TYPE_FW (0x01) +#define MPI2_EXT_IMAGE_TYPE_NVDATA (0x03) +#define MPI2_EXT_IMAGE_TYPE_BOOTLOADER (0x04) +#define MPI2_EXT_IMAGE_TYPE_INITIALIZATION (0x05) +#define MPI2_EXT_IMAGE_TYPE_FLASH_LAYOUT (0x06) +#define MPI2_EXT_IMAGE_TYPE_SUPPORTED_DEVICES (0x07) +#define MPI2_EXT_IMAGE_TYPE_MEGARAID (0x08) +#define MPI2_EXT_IMAGE_TYPE_ENCRYPTED_HASH (0x09) +#define MPI2_EXT_IMAGE_TYPE_MIN_PRODUCT_SPECIFIC (0x80) +#define MPI2_EXT_IMAGE_TYPE_MAX_PRODUCT_SPECIFIC (0xFF) + +#define MPI2_EXT_IMAGE_TYPE_MAX (MPI2_EXT_IMAGE_TYPE_MAX_PRODUCT_SPECIFIC) + +/*FLASH Layout Extended Image Data */ + +/* + *Host code (drivers, BIOS, utilities, etc.) should leave this define set to + *one and check RegionsPerLayout at runtime. + */ +#ifndef MPI2_FLASH_NUMBER_OF_REGIONS +#define MPI2_FLASH_NUMBER_OF_REGIONS (1) +#endif + +/* + *Host code (drivers, BIOS, utilities, etc.) should leave this define set to + *one and check NumberOfLayouts at runtime. + */ +#ifndef MPI2_FLASH_NUMBER_OF_LAYOUTS +#define MPI2_FLASH_NUMBER_OF_LAYOUTS (1) +#endif + +typedef struct _MPI2_FLASH_REGION { + U8 RegionType; /*0x00 */ + U8 Reserved1; /*0x01 */ + U16 Reserved2; /*0x02 */ + U32 RegionOffset; /*0x04 */ + U32 RegionSize; /*0x08 */ + U32 Reserved3; /*0x0C */ +} MPI2_FLASH_REGION, *PTR_MPI2_FLASH_REGION, + Mpi2FlashRegion_t, *pMpi2FlashRegion_t; + +typedef struct _MPI2_FLASH_LAYOUT { + U32 FlashSize; /*0x00 */ + U32 Reserved1; /*0x04 */ + U32 Reserved2; /*0x08 */ + U32 Reserved3; /*0x0C */ + MPI2_FLASH_REGION Region[MPI2_FLASH_NUMBER_OF_REGIONS]; /*0x10 */ +} MPI2_FLASH_LAYOUT, *PTR_MPI2_FLASH_LAYOUT, + Mpi2FlashLayout_t, *pMpi2FlashLayout_t; + +typedef struct _MPI2_FLASH_LAYOUT_DATA { + U8 ImageRevision; /*0x00 */ + U8 Reserved1; /*0x01 */ + U8 SizeOfRegion; /*0x02 */ + U8 Reserved2; /*0x03 */ + U16 NumberOfLayouts; /*0x04 */ + U16 RegionsPerLayout; /*0x06 */ + U16 MinimumSectorAlignment; /*0x08 */ + U16 Reserved3; /*0x0A */ + U32 Reserved4; /*0x0C */ + MPI2_FLASH_LAYOUT Layout[MPI2_FLASH_NUMBER_OF_LAYOUTS]; /*0x10 */ +} MPI2_FLASH_LAYOUT_DATA, *PTR_MPI2_FLASH_LAYOUT_DATA, + Mpi2FlashLayoutData_t, *pMpi2FlashLayoutData_t; + +/*defines for the RegionType field */ +#define MPI2_FLASH_REGION_UNUSED (0x00) +#define MPI2_FLASH_REGION_FIRMWARE (0x01) +#define MPI2_FLASH_REGION_BIOS (0x02) +#define MPI2_FLASH_REGION_NVDATA (0x03) +#define MPI2_FLASH_REGION_FIRMWARE_BACKUP (0x05) +#define MPI2_FLASH_REGION_MFG_INFORMATION (0x06) +#define MPI2_FLASH_REGION_CONFIG_1 (0x07) +#define MPI2_FLASH_REGION_CONFIG_2 (0x08) +#define MPI2_FLASH_REGION_MEGARAID (0x09) +#define MPI2_FLASH_REGION_COMMON_BOOT_BLOCK (0x0A) +#define MPI2_FLASH_REGION_INIT (MPI2_FLASH_REGION_COMMON_BOOT_BLOCK) +#define MPI2_FLASH_REGION_CBB_BACKUP (0x0D) +#define MPI2_FLASH_REGION_SBR (0x0E) +#define MPI2_FLASH_REGION_SBR_BACKUP (0x0F) +#define MPI2_FLASH_REGION_HIIM (0x10) +#define MPI2_FLASH_REGION_HIIA (0x11) +#define MPI2_FLASH_REGION_CTLR (0x12) +#define MPI2_FLASH_REGION_IMR_FIRMWARE (0x13) +#define MPI2_FLASH_REGION_MR_NVDATA (0x14) + +/*ImageRevision */ +#define MPI2_FLASH_LAYOUT_IMAGE_REVISION (0x00) + +/*Supported Devices Extended Image Data */ + +/* + *Host code (drivers, BIOS, utilities, etc.) should leave this define set to + *one and check NumberOfDevices at runtime. + */ +#ifndef MPI2_SUPPORTED_DEVICES_IMAGE_NUM_DEVICES +#define MPI2_SUPPORTED_DEVICES_IMAGE_NUM_DEVICES (1) +#endif + +typedef struct _MPI2_SUPPORTED_DEVICE { + U16 DeviceID; /*0x00 */ + U16 VendorID; /*0x02 */ + U16 DeviceIDMask; /*0x04 */ + U16 Reserved1; /*0x06 */ + U8 LowPCIRev; /*0x08 */ + U8 HighPCIRev; /*0x09 */ + U16 Reserved2; /*0x0A */ + U32 Reserved3; /*0x0C */ +} MPI2_SUPPORTED_DEVICE, *PTR_MPI2_SUPPORTED_DEVICE, + Mpi2SupportedDevice_t, *pMpi2SupportedDevice_t; + +typedef struct _MPI2_SUPPORTED_DEVICES_DATA { + U8 ImageRevision; /*0x00 */ + U8 Reserved1; /*0x01 */ + U8 NumberOfDevices; /*0x02 */ + U8 Reserved2; /*0x03 */ + U32 Reserved3; /*0x04 */ + MPI2_SUPPORTED_DEVICE + SupportedDevice[MPI2_SUPPORTED_DEVICES_IMAGE_NUM_DEVICES];/*0x08 */ +} MPI2_SUPPORTED_DEVICES_DATA, *PTR_MPI2_SUPPORTED_DEVICES_DATA, + Mpi2SupportedDevicesData_t, *pMpi2SupportedDevicesData_t; + +/*ImageRevision */ +#define MPI2_SUPPORTED_DEVICES_IMAGE_REVISION (0x00) + +/*Init Extended Image Data */ + +typedef struct _MPI2_INIT_IMAGE_FOOTER { + U32 BootFlags; /*0x00 */ + U32 ImageSize; /*0x04 */ + U32 Signature0; /*0x08 */ + U32 Signature1; /*0x0C */ + U32 Signature2; /*0x10 */ + U32 ResetVector; /*0x14 */ +} MPI2_INIT_IMAGE_FOOTER, *PTR_MPI2_INIT_IMAGE_FOOTER, + Mpi2InitImageFooter_t, *pMpi2InitImageFooter_t; + +/*defines for the BootFlags field */ +#define MPI2_INIT_IMAGE_BOOTFLAGS_OFFSET (0x00) + +/*defines for the ImageSize field */ +#define MPI2_INIT_IMAGE_IMAGESIZE_OFFSET (0x04) + +/*defines for the Signature0 field */ +#define MPI2_INIT_IMAGE_SIGNATURE0_OFFSET (0x08) +#define MPI2_INIT_IMAGE_SIGNATURE0 (0x5AA55AEA) + +/*defines for the Signature1 field */ +#define MPI2_INIT_IMAGE_SIGNATURE1_OFFSET (0x0C) +#define MPI2_INIT_IMAGE_SIGNATURE1 (0xA55AEAA5) + +/*defines for the Signature2 field */ +#define MPI2_INIT_IMAGE_SIGNATURE2_OFFSET (0x10) +#define MPI2_INIT_IMAGE_SIGNATURE2 (0x5AEAA55A) + +/*Signature fields as individual bytes */ +#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_0 (0xEA) +#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_1 (0x5A) +#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_2 (0xA5) +#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_3 (0x5A) + +#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_4 (0xA5) +#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_5 (0xEA) +#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_6 (0x5A) +#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_7 (0xA5) + +#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_8 (0x5A) +#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_9 (0xA5) +#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_A (0xEA) +#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_B (0x5A) + +/*defines for the ResetVector field */ +#define MPI2_INIT_IMAGE_RESETVECTOR_OFFSET (0x14) + + +/* Encrypted Hash Extended Image Data */ + +typedef struct _MPI25_ENCRYPTED_HASH_ENTRY { + U8 HashImageType; /* 0x00 */ + U8 HashAlgorithm; /* 0x01 */ + U8 EncryptionAlgorithm; /* 0x02 */ + U8 Reserved1; /* 0x03 */ + U32 Reserved2; /* 0x04 */ + U32 EncryptedHash[1]; /* 0x08 */ /* variable length */ +} MPI25_ENCRYPTED_HASH_ENTRY, *PTR_MPI25_ENCRYPTED_HASH_ENTRY, +Mpi25EncryptedHashEntry_t, *pMpi25EncryptedHashEntry_t; + +/* values for HashImageType */ +#define MPI25_HASH_IMAGE_TYPE_UNUSED (0x00) +#define MPI25_HASH_IMAGE_TYPE_FIRMWARE (0x01) +#define MPI25_HASH_IMAGE_TYPE_BIOS (0x02) + +/* values for HashAlgorithm */ +#define MPI25_HASH_ALGORITHM_UNUSED (0x00) +#define MPI25_HASH_ALGORITHM_SHA256 (0x01) + +/* values for EncryptionAlgorithm */ +#define MPI25_ENCRYPTION_ALG_UNUSED (0x00) +#define MPI25_ENCRYPTION_ALG_RSA256 (0x01) + +typedef struct _MPI25_ENCRYPTED_HASH_DATA { + U8 ImageVersion; /* 0x00 */ + U8 NumHash; /* 0x01 */ + U16 Reserved1; /* 0x02 */ + U32 Reserved2; /* 0x04 */ + MPI25_ENCRYPTED_HASH_ENTRY EncryptedHashEntry[1]; /* 0x08 */ +} MPI25_ENCRYPTED_HASH_DATA, *PTR_MPI25_ENCRYPTED_HASH_DATA, +Mpi25EncryptedHashData_t, *pMpi25EncryptedHashData_t; + + +/**************************************************************************** +* PowerManagementControl message +****************************************************************************/ + +/*PowerManagementControl Request message */ +typedef struct _MPI2_PWR_MGMT_CONTROL_REQUEST { + U8 Feature; /*0x00 */ + U8 Reserved1; /*0x01 */ + U8 ChainOffset; /*0x02 */ + U8 Function; /*0x03 */ + U16 Reserved2; /*0x04 */ + U8 Reserved3; /*0x06 */ + U8 MsgFlags; /*0x07 */ + U8 VP_ID; /*0x08 */ + U8 VF_ID; /*0x09 */ + U16 Reserved4; /*0x0A */ + U8 Parameter1; /*0x0C */ + U8 Parameter2; /*0x0D */ + U8 Parameter3; /*0x0E */ + U8 Parameter4; /*0x0F */ + U32 Reserved5; /*0x10 */ + U32 Reserved6; /*0x14 */ +} MPI2_PWR_MGMT_CONTROL_REQUEST, *PTR_MPI2_PWR_MGMT_CONTROL_REQUEST, + Mpi2PwrMgmtControlRequest_t, *pMpi2PwrMgmtControlRequest_t; + +/*defines for the Feature field */ +#define MPI2_PM_CONTROL_FEATURE_DA_PHY_POWER_COND (0x01) +#define MPI2_PM_CONTROL_FEATURE_PORT_WIDTH_MODULATION (0x02) +#define MPI2_PM_CONTROL_FEATURE_PCIE_LINK (0x03) /*obsolete */ +#define MPI2_PM_CONTROL_FEATURE_IOC_SPEED (0x04) +#define MPI2_PM_CONTROL_FEATURE_GLOBAL_PWR_MGMT_MODE (0x05) +#define MPI2_PM_CONTROL_FEATURE_MIN_PRODUCT_SPECIFIC (0x80) +#define MPI2_PM_CONTROL_FEATURE_MAX_PRODUCT_SPECIFIC (0xFF) + +/*parameter usage for the MPI2_PM_CONTROL_FEATURE_DA_PHY_POWER_COND Feature */ +/*Parameter1 contains a PHY number */ +/*Parameter2 indicates power condition action using these defines */ +#define MPI2_PM_CONTROL_PARAM2_PARTIAL (0x01) +#define MPI2_PM_CONTROL_PARAM2_SLUMBER (0x02) +#define MPI2_PM_CONTROL_PARAM2_EXIT_PWR_MGMT (0x03) +/*Parameter3 and Parameter4 are reserved */ + +/*parameter usage for the MPI2_PM_CONTROL_FEATURE_PORT_WIDTH_MODULATION + * Feature */ +/*Parameter1 contains SAS port width modulation group number */ +/*Parameter2 indicates IOC action using these defines */ +#define MPI2_PM_CONTROL_PARAM2_REQUEST_OWNERSHIP (0x01) +#define MPI2_PM_CONTROL_PARAM2_CHANGE_MODULATION (0x02) +#define MPI2_PM_CONTROL_PARAM2_RELINQUISH_OWNERSHIP (0x03) +/*Parameter3 indicates desired modulation level using these defines */ +#define MPI2_PM_CONTROL_PARAM3_25_PERCENT (0x00) +#define MPI2_PM_CONTROL_PARAM3_50_PERCENT (0x01) +#define MPI2_PM_CONTROL_PARAM3_75_PERCENT (0x02) +#define MPI2_PM_CONTROL_PARAM3_100_PERCENT (0x03) +/*Parameter4 is reserved */ + +/*this next set (_PCIE_LINK) is obsolete */ +/*parameter usage for the MPI2_PM_CONTROL_FEATURE_PCIE_LINK Feature */ +/*Parameter1 indicates desired PCIe link speed using these defines */ +#define MPI2_PM_CONTROL_PARAM1_PCIE_2_5_GBPS (0x00) /*obsolete */ +#define MPI2_PM_CONTROL_PARAM1_PCIE_5_0_GBPS (0x01) /*obsolete */ +#define MPI2_PM_CONTROL_PARAM1_PCIE_8_0_GBPS (0x02) /*obsolete */ +/*Parameter2 indicates desired PCIe link width using these defines */ +#define MPI2_PM_CONTROL_PARAM2_WIDTH_X1 (0x01) /*obsolete */ +#define MPI2_PM_CONTROL_PARAM2_WIDTH_X2 (0x02) /*obsolete */ +#define MPI2_PM_CONTROL_PARAM2_WIDTH_X4 (0x04) /*obsolete */ +#define MPI2_PM_CONTROL_PARAM2_WIDTH_X8 (0x08) /*obsolete */ +/*Parameter3 and Parameter4 are reserved */ + +/*parameter usage for the MPI2_PM_CONTROL_FEATURE_IOC_SPEED Feature */ +/*Parameter1 indicates desired IOC hardware clock speed using these defines */ +#define MPI2_PM_CONTROL_PARAM1_FULL_IOC_SPEED (0x01) +#define MPI2_PM_CONTROL_PARAM1_HALF_IOC_SPEED (0x02) +#define MPI2_PM_CONTROL_PARAM1_QUARTER_IOC_SPEED (0x04) +#define MPI2_PM_CONTROL_PARAM1_EIGHTH_IOC_SPEED (0x08) +/*Parameter2, Parameter3, and Parameter4 are reserved */ + +/*parameter usage for the MPI2_PM_CONTROL_FEATURE_GLOBAL_PWR_MGMT_MODE Feature*/ +/*Parameter1 indicates host action regarding global power management mode */ +#define MPI2_PM_CONTROL_PARAM1_TAKE_CONTROL (0x01) +#define MPI2_PM_CONTROL_PARAM1_CHANGE_GLOBAL_MODE (0x02) +#define MPI2_PM_CONTROL_PARAM1_RELEASE_CONTROL (0x03) +/*Parameter2 indicates the requested global power management mode */ +#define MPI2_PM_CONTROL_PARAM2_FULL_PWR_PERF (0x01) +#define MPI2_PM_CONTROL_PARAM2_REDUCED_PWR_PERF (0x08) +#define MPI2_PM_CONTROL_PARAM2_STANDBY (0x40) +/*Parameter3 and Parameter4 are reserved */ + +/*PowerManagementControl Reply message */ +typedef struct _MPI2_PWR_MGMT_CONTROL_REPLY { + U8 Feature; /*0x00 */ + U8 Reserved1; /*0x01 */ + U8 MsgLength; /*0x02 */ + U8 Function; /*0x03 */ + U16 Reserved2; /*0x04 */ + U8 Reserved3; /*0x06 */ + U8 MsgFlags; /*0x07 */ + U8 VP_ID; /*0x08 */ + U8 VF_ID; /*0x09 */ + U16 Reserved4; /*0x0A */ + U16 Reserved5; /*0x0C */ + U16 IOCStatus; /*0x0E */ + U32 IOCLogInfo; /*0x10 */ +} MPI2_PWR_MGMT_CONTROL_REPLY, *PTR_MPI2_PWR_MGMT_CONTROL_REPLY, + Mpi2PwrMgmtControlReply_t, *pMpi2PwrMgmtControlReply_t; + +/**************************************************************************** +* IO Unit Control messages (MPI v2.6 and later only.) +****************************************************************************/ + +/* IO Unit Control Request Message */ +typedef struct _MPI26_IOUNIT_CONTROL_REQUEST { + U8 Operation; /* 0x00 */ + U8 Reserved1; /* 0x01 */ + U8 ChainOffset; /* 0x02 */ + U8 Function; /* 0x03 */ + U16 DevHandle; /* 0x04 */ + U8 IOCParameter; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U8 VP_ID; /* 0x08 */ + U8 VF_ID; /* 0x09 */ + U16 Reserved3; /* 0x0A */ + U16 Reserved4; /* 0x0C */ + U8 PhyNum; /* 0x0E */ + U8 PrimFlags; /* 0x0F */ + U32 Primitive; /* 0x10 */ + U8 LookupMethod; /* 0x14 */ + U8 Reserved5; /* 0x15 */ + U16 SlotNumber; /* 0x16 */ + U64 LookupAddress; /* 0x18 */ + U32 IOCParameterValue; /* 0x20 */ + U32 Reserved7; /* 0x24 */ + U32 Reserved8; /* 0x28 */ +} MPI26_IOUNIT_CONTROL_REQUEST, + *PTR_MPI26_IOUNIT_CONTROL_REQUEST, + Mpi26IoUnitControlRequest_t, + *pMpi26IoUnitControlRequest_t; + +/* values for the Operation field */ +#define MPI26_CTRL_OP_CLEAR_ALL_PERSISTENT (0x02) +#define MPI26_CTRL_OP_SAS_PHY_LINK_RESET (0x06) +#define MPI26_CTRL_OP_SAS_PHY_HARD_RESET (0x07) +#define MPI26_CTRL_OP_PHY_CLEAR_ERROR_LOG (0x08) +#define MPI26_CTRL_OP_LINK_CLEAR_ERROR_LOG (0x09) +#define MPI26_CTRL_OP_SAS_SEND_PRIMITIVE (0x0A) +#define MPI26_CTRL_OP_FORCE_FULL_DISCOVERY (0x0B) +#define MPI26_CTRL_OP_REMOVE_DEVICE (0x0D) +#define MPI26_CTRL_OP_LOOKUP_MAPPING (0x0E) +#define MPI26_CTRL_OP_SET_IOC_PARAMETER (0x0F) +#define MPI26_CTRL_OP_ENABLE_FP_DEVICE (0x10) +#define MPI26_CTRL_OP_DISABLE_FP_DEVICE (0x11) +#define MPI26_CTRL_OP_ENABLE_FP_ALL (0x12) +#define MPI26_CTRL_OP_DISABLE_FP_ALL (0x13) +#define MPI26_CTRL_OP_DEV_ENABLE_NCQ (0x14) +#define MPI26_CTRL_OP_DEV_DISABLE_NCQ (0x15) +#define MPI26_CTRL_OP_SHUTDOWN (0x16) +#define MPI26_CTRL_OP_DEV_ENABLE_PERSIST_CONNECTION (0x17) +#define MPI26_CTRL_OP_DEV_DISABLE_PERSIST_CONNECTION (0x18) +#define MPI26_CTRL_OP_DEV_CLOSE_PERSIST_CONNECTION (0x19) +#define MPI26_CTRL_OP_ENABLE_NVME_SGL_FORMAT (0x1A) +#define MPI26_CTRL_OP_DISABLE_NVME_SGL_FORMAT (0x1B) +#define MPI26_CTRL_OP_PRODUCT_SPECIFIC_MIN (0x80) + +/* values for the PrimFlags field */ +#define MPI26_CTRL_PRIMFLAGS_SINGLE (0x08) +#define MPI26_CTRL_PRIMFLAGS_TRIPLE (0x02) +#define MPI26_CTRL_PRIMFLAGS_REDUNDANT (0x01) + +/* values for the LookupMethod field */ +#define MPI26_CTRL_LOOKUP_METHOD_WWID_ADDRESS (0x01) +#define MPI26_CTRL_LOOKUP_METHOD_ENCLOSURE_SLOT (0x02) +#define MPI26_CTRL_LOOKUP_METHOD_SAS_DEVICE_NAME (0x03) + + +/* IO Unit Control Reply Message */ +typedef struct _MPI26_IOUNIT_CONTROL_REPLY { + U8 Operation; /* 0x00 */ + U8 Reserved1; /* 0x01 */ + U8 MsgLength; /* 0x02 */ + U8 Function; /* 0x03 */ + U16 DevHandle; /* 0x04 */ + U8 IOCParameter; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U8 VP_ID; /* 0x08 */ + U8 VF_ID; /* 0x09 */ + U16 Reserved3; /* 0x0A */ + U16 Reserved4; /* 0x0C */ + U16 IOCStatus; /* 0x0E */ + U32 IOCLogInfo; /* 0x10 */ +} MPI26_IOUNIT_CONTROL_REPLY, + *PTR_MPI26_IOUNIT_CONTROL_REPLY, + Mpi26IoUnitControlReply_t, + *pMpi26IoUnitControlReply_t; + + +#endif diff --git a/drivers/scsi/mpt3sas/mpi/mpi2_pci.h b/drivers/scsi/mpt3sas/mpi/mpi2_pci.h new file mode 100644 index 000000000..f0281f943 --- /dev/null +++ b/drivers/scsi/mpt3sas/mpi/mpi2_pci.h @@ -0,0 +1,111 @@ +/* + * Copyright 2012-2015 Avago Technologies. All rights reserved. + * + * + * Name: mpi2_pci.h + * Title: MPI PCIe Attached Devices structures and definitions. + * Creation Date: October 9, 2012 + * + * mpi2_pci.h Version: 02.00.02 + * + * NOTE: Names (typedefs, defines, etc.) beginning with an MPI25 or Mpi25 + * prefix are for use only on MPI v2.5 products, and must not be used + * with MPI v2.0 products. Unless otherwise noted, names beginning with + * MPI2 or Mpi2 are for use with both MPI v2.0 and MPI v2.5 products. + * + * Version History + * --------------- + * + * Date Version Description + * -------- -------- ------------------------------------------------------ + * 03-16-15 02.00.00 Initial version. + * 02-17-16 02.00.01 Removed AHCI support. + * Removed SOP support. + * 07-01-16 02.00.02 Added MPI26_NVME_FLAGS_FORCE_ADMIN_ERR_RESP to + * NVME Encapsulated Request. + * -------------------------------------------------------------------------- + */ + +#ifndef MPI2_PCI_H +#define MPI2_PCI_H + + +/* + *Values for the PCIe DeviceInfo field used in PCIe Device Status Change Event + *data and PCIe Configuration pages. + */ +#define MPI26_PCIE_DEVINFO_DIRECT_ATTACH (0x00000010) + +#define MPI26_PCIE_DEVINFO_MASK_DEVICE_TYPE (0x0000000F) +#define MPI26_PCIE_DEVINFO_NO_DEVICE (0x00000000) +#define MPI26_PCIE_DEVINFO_PCI_SWITCH (0x00000001) +#define MPI26_PCIE_DEVINFO_NVME (0x00000003) + + +/**************************************************************************** +* NVMe Encapsulated message +****************************************************************************/ + +/*NVME Encapsulated Request Message */ +typedef struct _MPI26_NVME_ENCAPSULATED_REQUEST { + U16 DevHandle; /*0x00 */ + U8 ChainOffset; /*0x02 */ + U8 Function; /*0x03 */ + U16 EncapsulatedCommandLength; /*0x04 */ + U8 Reserved1; /*0x06 */ + U8 MsgFlags; /*0x07 */ + U8 VP_ID; /*0x08 */ + U8 VF_ID; /*0x09 */ + U16 Reserved2; /*0x0A */ + U32 Reserved3; /*0x0C */ + U64 ErrorResponseBaseAddress; /*0x10 */ + U16 ErrorResponseAllocationLength; /*0x18 */ + U16 Flags; /*0x1A */ + U32 DataLength; /*0x1C */ + U8 NVMe_Command[4]; /*0x20 */ + +} MPI26_NVME_ENCAPSULATED_REQUEST, *PTR_MPI26_NVME_ENCAPSULATED_REQUEST, + Mpi26NVMeEncapsulatedRequest_t, *pMpi26NVMeEncapsulatedRequest_t; + +/*defines for the Flags field */ +#define MPI26_NVME_FLAGS_FORCE_ADMIN_ERR_RESP (0x0020) +/*Submission Queue Type*/ +#define MPI26_NVME_FLAGS_SUBMISSIONQ_MASK (0x0010) +#define MPI26_NVME_FLAGS_SUBMISSIONQ_IO (0x0000) +#define MPI26_NVME_FLAGS_SUBMISSIONQ_ADMIN (0x0010) +/*Error Response Address Space */ +#define MPI26_NVME_FLAGS_MASK_ERROR_RSP_ADDR (0x000C) +#define MPI26_NVME_FLAGS_SYSTEM_RSP_ADDR (0x0000) +#define MPI26_NVME_FLAGS_IOCPLB_RSP_ADDR (0x0008) +#define MPI26_NVME_FLAGS_IOCPLBNTA_RSP_ADDR (0x000C) +/*Data Direction*/ +#define MPI26_NVME_FLAGS_DATADIRECTION_MASK (0x0003) +#define MPI26_NVME_FLAGS_NODATATRANSFER (0x0000) +#define MPI26_NVME_FLAGS_WRITE (0x0001) +#define MPI26_NVME_FLAGS_READ (0x0002) +#define MPI26_NVME_FLAGS_BIDIRECTIONAL (0x0003) + + +/*NVMe Encapuslated Reply Message */ +typedef struct _MPI26_NVME_ENCAPSULATED_ERROR_REPLY { + U16 DevHandle; /*0x00 */ + U8 MsgLength; /*0x02 */ + U8 Function; /*0x03 */ + U16 EncapsulatedCommandLength; /*0x04 */ + U8 Reserved1; /*0x06 */ + U8 MsgFlags; /*0x07 */ + U8 VP_ID; /*0x08 */ + U8 VF_ID; /*0x09 */ + U16 Reserved2; /*0x0A */ + U16 Reserved3; /*0x0C */ + U16 IOCStatus; /*0x0E */ + U32 IOCLogInfo; /*0x10 */ + U16 ErrorResponseCount; /*0x14 */ + U16 Reserved4; /*0x16 */ +} MPI26_NVME_ENCAPSULATED_ERROR_REPLY, + *PTR_MPI26_NVME_ENCAPSULATED_ERROR_REPLY, + Mpi26NVMeEncapsulatedErrorReply_t, + *pMpi26NVMeEncapsulatedErrorReply_t; + + +#endif diff --git a/drivers/scsi/mpt3sas/mpi/mpi2_raid.h b/drivers/scsi/mpt3sas/mpi/mpi2_raid.h new file mode 100644 index 000000000..b9bb1c178 --- /dev/null +++ b/drivers/scsi/mpt3sas/mpi/mpi2_raid.h @@ -0,0 +1,356 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright 2000-2014 Avago Technologies. All rights reserved. + * + * + * Name: mpi2_raid.h + * Title: MPI Integrated RAID messages and structures + * Creation Date: April 26, 2007 + * + * mpi2_raid.h Version: 02.00.11 + * + * Version History + * --------------- + * + * Date Version Description + * -------- -------- ------------------------------------------------------ + * 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A. + * 08-31-07 02.00.01 Modifications to RAID Action request and reply, + * including the Actions and ActionData. + * 02-29-08 02.00.02 Added MPI2_RAID_ACTION_ADATA_DISABL_FULL_REBUILD. + * 05-21-08 02.00.03 Added MPI2_RAID_VOL_CREATION_NUM_PHYSDISKS so that + * the PhysDisk array in MPI2_RAID_VOLUME_CREATION_STRUCT + * can be sized by the build environment. + * 07-30-09 02.00.04 Added proper define for the Use Default Settings bit of + * VolumeCreationFlags and marked the old one as obsolete. + * 05-12-10 02.00.05 Added MPI2_RAID_VOL_FLAGS_OP_MDC define. + * 08-24-10 02.00.06 Added MPI2_RAID_ACTION_COMPATIBILITY_CHECK along with + * related structures and defines. + * Added product-specific range to RAID Action values. + * 11-18-11 02.00.07 Incorporating additions for MPI v2.5. + * 02-06-12 02.00.08 Added MPI2_RAID_ACTION_PHYSDISK_HIDDEN. + * 07-26-12 02.00.09 Added ElapsedSeconds field to MPI2_RAID_VOL_INDICATOR. + * Added MPI2_RAID_VOL_FLAGS_ELAPSED_SECONDS_VALID define. + * 04-17-13 02.00.10 Added MPI25_RAID_ACTION_ADATA_ALLOW_PI. + * 11-18-14 02.00.11 Updated copyright information. + * -------------------------------------------------------------------------- + */ + +#ifndef MPI2_RAID_H +#define MPI2_RAID_H + +/***************************************************************************** +* +* Integrated RAID Messages +* +*****************************************************************************/ + +/**************************************************************************** +* RAID Action messages +****************************************************************************/ + +/* ActionDataWord defines for use with MPI2_RAID_ACTION_CREATE_VOLUME action */ +#define MPI25_RAID_ACTION_ADATA_ALLOW_PI (0x80000000) + +/*ActionDataWord defines for use with MPI2_RAID_ACTION_DELETE_VOLUME action */ +#define MPI2_RAID_ACTION_ADATA_KEEP_LBA0 (0x00000000) +#define MPI2_RAID_ACTION_ADATA_ZERO_LBA0 (0x00000001) + +/*use MPI2_RAIDVOL0_SETTING_ defines from mpi2_cnfg.h for + *MPI2_RAID_ACTION_CHANGE_VOL_WRITE_CACHE action */ + +/*ActionDataWord defines for use with + *MPI2_RAID_ACTION_DISABLE_ALL_VOLUMES action */ +#define MPI2_RAID_ACTION_ADATA_DISABL_FULL_REBUILD (0x00000001) + +/*ActionDataWord for MPI2_RAID_ACTION_SET_RAID_FUNCTION_RATE Action */ +typedef struct _MPI2_RAID_ACTION_RATE_DATA { + U8 RateToChange; /*0x00 */ + U8 RateOrMode; /*0x01 */ + U16 DataScrubDuration; /*0x02 */ +} MPI2_RAID_ACTION_RATE_DATA, *PTR_MPI2_RAID_ACTION_RATE_DATA, + Mpi2RaidActionRateData_t, *pMpi2RaidActionRateData_t; + +#define MPI2_RAID_ACTION_SET_RATE_RESYNC (0x00) +#define MPI2_RAID_ACTION_SET_RATE_DATA_SCRUB (0x01) +#define MPI2_RAID_ACTION_SET_RATE_POWERSAVE_MODE (0x02) + +/*ActionDataWord for MPI2_RAID_ACTION_START_RAID_FUNCTION Action */ +typedef struct _MPI2_RAID_ACTION_START_RAID_FUNCTION { + U8 RAIDFunction; /*0x00 */ + U8 Flags; /*0x01 */ + U16 Reserved1; /*0x02 */ +} MPI2_RAID_ACTION_START_RAID_FUNCTION, + *PTR_MPI2_RAID_ACTION_START_RAID_FUNCTION, + Mpi2RaidActionStartRaidFunction_t, + *pMpi2RaidActionStartRaidFunction_t; + +/*defines for the RAIDFunction field */ +#define MPI2_RAID_ACTION_START_BACKGROUND_INIT (0x00) +#define MPI2_RAID_ACTION_START_ONLINE_CAP_EXPANSION (0x01) +#define MPI2_RAID_ACTION_START_CONSISTENCY_CHECK (0x02) + +/*defines for the Flags field */ +#define MPI2_RAID_ACTION_START_NEW (0x00) +#define MPI2_RAID_ACTION_START_RESUME (0x01) + +/*ActionDataWord for MPI2_RAID_ACTION_STOP_RAID_FUNCTION Action */ +typedef struct _MPI2_RAID_ACTION_STOP_RAID_FUNCTION { + U8 RAIDFunction; /*0x00 */ + U8 Flags; /*0x01 */ + U16 Reserved1; /*0x02 */ +} MPI2_RAID_ACTION_STOP_RAID_FUNCTION, + *PTR_MPI2_RAID_ACTION_STOP_RAID_FUNCTION, + Mpi2RaidActionStopRaidFunction_t, + *pMpi2RaidActionStopRaidFunction_t; + +/*defines for the RAIDFunction field */ +#define MPI2_RAID_ACTION_STOP_BACKGROUND_INIT (0x00) +#define MPI2_RAID_ACTION_STOP_ONLINE_CAP_EXPANSION (0x01) +#define MPI2_RAID_ACTION_STOP_CONSISTENCY_CHECK (0x02) + +/*defines for the Flags field */ +#define MPI2_RAID_ACTION_STOP_ABORT (0x00) +#define MPI2_RAID_ACTION_STOP_PAUSE (0x01) + +/*ActionDataWord for MPI2_RAID_ACTION_CREATE_HOT_SPARE Action */ +typedef struct _MPI2_RAID_ACTION_HOT_SPARE { + U8 HotSparePool; /*0x00 */ + U8 Reserved1; /*0x01 */ + U16 DevHandle; /*0x02 */ +} MPI2_RAID_ACTION_HOT_SPARE, *PTR_MPI2_RAID_ACTION_HOT_SPARE, + Mpi2RaidActionHotSpare_t, *pMpi2RaidActionHotSpare_t; + +/*ActionDataWord for MPI2_RAID_ACTION_DEVICE_FW_UPDATE_MODE Action */ +typedef struct _MPI2_RAID_ACTION_FW_UPDATE_MODE { + U8 Flags; /*0x00 */ + U8 DeviceFirmwareUpdateModeTimeout; /*0x01 */ + U16 Reserved1; /*0x02 */ +} MPI2_RAID_ACTION_FW_UPDATE_MODE, + *PTR_MPI2_RAID_ACTION_FW_UPDATE_MODE, + Mpi2RaidActionFwUpdateMode_t, + *pMpi2RaidActionFwUpdateMode_t; + +/*ActionDataWord defines for use with + *MPI2_RAID_ACTION_DEVICE_FW_UPDATE_MODE action */ +#define MPI2_RAID_ACTION_ADATA_DISABLE_FW_UPDATE (0x00) +#define MPI2_RAID_ACTION_ADATA_ENABLE_FW_UPDATE (0x01) + +typedef union _MPI2_RAID_ACTION_DATA { + U32 Word; + MPI2_RAID_ACTION_RATE_DATA Rates; + MPI2_RAID_ACTION_START_RAID_FUNCTION StartRaidFunction; + MPI2_RAID_ACTION_STOP_RAID_FUNCTION StopRaidFunction; + MPI2_RAID_ACTION_HOT_SPARE HotSpare; + MPI2_RAID_ACTION_FW_UPDATE_MODE FwUpdateMode; +} MPI2_RAID_ACTION_DATA, *PTR_MPI2_RAID_ACTION_DATA, + Mpi2RaidActionData_t, *pMpi2RaidActionData_t; + +/*RAID Action Request Message */ +typedef struct _MPI2_RAID_ACTION_REQUEST { + U8 Action; /*0x00 */ + U8 Reserved1; /*0x01 */ + U8 ChainOffset; /*0x02 */ + U8 Function; /*0x03 */ + U16 VolDevHandle; /*0x04 */ + U8 PhysDiskNum; /*0x06 */ + U8 MsgFlags; /*0x07 */ + U8 VP_ID; /*0x08 */ + U8 VF_ID; /*0x09 */ + U16 Reserved2; /*0x0A */ + U32 Reserved3; /*0x0C */ + MPI2_RAID_ACTION_DATA ActionDataWord; /*0x10 */ + MPI2_SGE_SIMPLE_UNION ActionDataSGE; /*0x14 */ +} MPI2_RAID_ACTION_REQUEST, *PTR_MPI2_RAID_ACTION_REQUEST, + Mpi2RaidActionRequest_t, *pMpi2RaidActionRequest_t; + +/*RAID Action request Action values */ + +#define MPI2_RAID_ACTION_INDICATOR_STRUCT (0x01) +#define MPI2_RAID_ACTION_CREATE_VOLUME (0x02) +#define MPI2_RAID_ACTION_DELETE_VOLUME (0x03) +#define MPI2_RAID_ACTION_DISABLE_ALL_VOLUMES (0x04) +#define MPI2_RAID_ACTION_ENABLE_ALL_VOLUMES (0x05) +#define MPI2_RAID_ACTION_PHYSDISK_OFFLINE (0x0A) +#define MPI2_RAID_ACTION_PHYSDISK_ONLINE (0x0B) +#define MPI2_RAID_ACTION_FAIL_PHYSDISK (0x0F) +#define MPI2_RAID_ACTION_ACTIVATE_VOLUME (0x11) +#define MPI2_RAID_ACTION_DEVICE_FW_UPDATE_MODE (0x15) +#define MPI2_RAID_ACTION_CHANGE_VOL_WRITE_CACHE (0x17) +#define MPI2_RAID_ACTION_SET_VOLUME_NAME (0x18) +#define MPI2_RAID_ACTION_SET_RAID_FUNCTION_RATE (0x19) +#define MPI2_RAID_ACTION_ENABLE_FAILED_VOLUME (0x1C) +#define MPI2_RAID_ACTION_CREATE_HOT_SPARE (0x1D) +#define MPI2_RAID_ACTION_DELETE_HOT_SPARE (0x1E) +#define MPI2_RAID_ACTION_SYSTEM_SHUTDOWN_INITIATED (0x20) +#define MPI2_RAID_ACTION_START_RAID_FUNCTION (0x21) +#define MPI2_RAID_ACTION_STOP_RAID_FUNCTION (0x22) +#define MPI2_RAID_ACTION_COMPATIBILITY_CHECK (0x23) +#define MPI2_RAID_ACTION_PHYSDISK_HIDDEN (0x24) +#define MPI2_RAID_ACTION_MIN_PRODUCT_SPECIFIC (0x80) +#define MPI2_RAID_ACTION_MAX_PRODUCT_SPECIFIC (0xFF) + +/*RAID Volume Creation Structure */ + +/* + *The following define can be customized for the targeted product. + */ +#ifndef MPI2_RAID_VOL_CREATION_NUM_PHYSDISKS +#define MPI2_RAID_VOL_CREATION_NUM_PHYSDISKS (1) +#endif + +typedef struct _MPI2_RAID_VOLUME_PHYSDISK { + U8 RAIDSetNum; /*0x00 */ + U8 PhysDiskMap; /*0x01 */ + U16 PhysDiskDevHandle; /*0x02 */ +} MPI2_RAID_VOLUME_PHYSDISK, *PTR_MPI2_RAID_VOLUME_PHYSDISK, + Mpi2RaidVolumePhysDisk_t, *pMpi2RaidVolumePhysDisk_t; + +/*defines for the PhysDiskMap field */ +#define MPI2_RAIDACTION_PHYSDISK_PRIMARY (0x01) +#define MPI2_RAIDACTION_PHYSDISK_SECONDARY (0x02) + +typedef struct _MPI2_RAID_VOLUME_CREATION_STRUCT { + U8 NumPhysDisks; /*0x00 */ + U8 VolumeType; /*0x01 */ + U16 Reserved1; /*0x02 */ + U32 VolumeCreationFlags; /*0x04 */ + U32 VolumeSettings; /*0x08 */ + U8 Reserved2; /*0x0C */ + U8 ResyncRate; /*0x0D */ + U16 DataScrubDuration; /*0x0E */ + U64 VolumeMaxLBA; /*0x10 */ + U32 StripeSize; /*0x18 */ + U8 Name[16]; /*0x1C */ + MPI2_RAID_VOLUME_PHYSDISK + PhysDisk[MPI2_RAID_VOL_CREATION_NUM_PHYSDISKS]; /*0x2C */ +} MPI2_RAID_VOLUME_CREATION_STRUCT, + *PTR_MPI2_RAID_VOLUME_CREATION_STRUCT, + Mpi2RaidVolumeCreationStruct_t, + *pMpi2RaidVolumeCreationStruct_t; + +/*use MPI2_RAID_VOL_TYPE_ defines from mpi2_cnfg.h for VolumeType */ + +/*defines for the VolumeCreationFlags field */ +#define MPI2_RAID_VOL_CREATION_DEFAULT_SETTINGS (0x80000000) +#define MPI2_RAID_VOL_CREATION_BACKGROUND_INIT (0x00000004) +#define MPI2_RAID_VOL_CREATION_LOW_LEVEL_INIT (0x00000002) +#define MPI2_RAID_VOL_CREATION_MIGRATE_DATA (0x00000001) +/*The following is an obsolete define. + *It must be shifted left 24 bits in order to set the proper bit. + */ +#define MPI2_RAID_VOL_CREATION_USE_DEFAULT_SETTINGS (0x80) + +/*RAID Online Capacity Expansion Structure */ + +typedef struct _MPI2_RAID_ONLINE_CAPACITY_EXPANSION { + U32 Flags; /*0x00 */ + U16 DevHandle0; /*0x04 */ + U16 Reserved1; /*0x06 */ + U16 DevHandle1; /*0x08 */ + U16 Reserved2; /*0x0A */ +} MPI2_RAID_ONLINE_CAPACITY_EXPANSION, + *PTR_MPI2_RAID_ONLINE_CAPACITY_EXPANSION, + Mpi2RaidOnlineCapacityExpansion_t, + *pMpi2RaidOnlineCapacityExpansion_t; + +/*RAID Compatibility Input Structure */ + +typedef struct _MPI2_RAID_COMPATIBILITY_INPUT_STRUCT { + U16 SourceDevHandle; /*0x00 */ + U16 CandidateDevHandle; /*0x02 */ + U32 Flags; /*0x04 */ + U32 Reserved1; /*0x08 */ + U32 Reserved2; /*0x0C */ +} MPI2_RAID_COMPATIBILITY_INPUT_STRUCT, + *PTR_MPI2_RAID_COMPATIBILITY_INPUT_STRUCT, + Mpi2RaidCompatibilityInputStruct_t, + *pMpi2RaidCompatibilityInputStruct_t; + +/*defines for RAID Compatibility Structure Flags field */ +#define MPI2_RAID_COMPAT_SOURCE_IS_VOLUME_FLAG (0x00000002) +#define MPI2_RAID_COMPAT_REPORT_SOURCE_INFO_FLAG (0x00000001) + +/*RAID Volume Indicator Structure */ + +typedef struct _MPI2_RAID_VOL_INDICATOR { + U64 TotalBlocks; /*0x00 */ + U64 BlocksRemaining; /*0x08 */ + U32 Flags; /*0x10 */ + U32 ElapsedSeconds; /* 0x14 */ +} MPI2_RAID_VOL_INDICATOR, *PTR_MPI2_RAID_VOL_INDICATOR, + Mpi2RaidVolIndicator_t, *pMpi2RaidVolIndicator_t; + +/*defines for RAID Volume Indicator Flags field */ +#define MPI2_RAID_VOL_FLAGS_ELAPSED_SECONDS_VALID (0x80000000) +#define MPI2_RAID_VOL_FLAGS_OP_MASK (0x0000000F) +#define MPI2_RAID_VOL_FLAGS_OP_BACKGROUND_INIT (0x00000000) +#define MPI2_RAID_VOL_FLAGS_OP_ONLINE_CAP_EXPANSION (0x00000001) +#define MPI2_RAID_VOL_FLAGS_OP_CONSISTENCY_CHECK (0x00000002) +#define MPI2_RAID_VOL_FLAGS_OP_RESYNC (0x00000003) +#define MPI2_RAID_VOL_FLAGS_OP_MDC (0x00000004) + +/*RAID Compatibility Result Structure */ + +typedef struct _MPI2_RAID_COMPATIBILITY_RESULT_STRUCT { + U8 State; /*0x00 */ + U8 Reserved1; /*0x01 */ + U16 Reserved2; /*0x02 */ + U32 GenericAttributes; /*0x04 */ + U32 OEMSpecificAttributes; /*0x08 */ + U32 Reserved3; /*0x0C */ + U32 Reserved4; /*0x10 */ +} MPI2_RAID_COMPATIBILITY_RESULT_STRUCT, + *PTR_MPI2_RAID_COMPATIBILITY_RESULT_STRUCT, + Mpi2RaidCompatibilityResultStruct_t, + *pMpi2RaidCompatibilityResultStruct_t; + +/*defines for RAID Compatibility Result Structure State field */ +#define MPI2_RAID_COMPAT_STATE_COMPATIBLE (0x00) +#define MPI2_RAID_COMPAT_STATE_NOT_COMPATIBLE (0x01) + +/*defines for RAID Compatibility Result Structure GenericAttributes field */ +#define MPI2_RAID_COMPAT_GENATTRIB_4K_SECTOR (0x00000010) + +#define MPI2_RAID_COMPAT_GENATTRIB_MEDIA_MASK (0x0000000C) +#define MPI2_RAID_COMPAT_GENATTRIB_SOLID_STATE_DRIVE (0x00000008) +#define MPI2_RAID_COMPAT_GENATTRIB_HARD_DISK_DRIVE (0x00000004) + +#define MPI2_RAID_COMPAT_GENATTRIB_PROTOCOL_MASK (0x00000003) +#define MPI2_RAID_COMPAT_GENATTRIB_SAS_PROTOCOL (0x00000002) +#define MPI2_RAID_COMPAT_GENATTRIB_SATA_PROTOCOL (0x00000001) + +/*RAID Action Reply ActionData union */ +typedef union _MPI2_RAID_ACTION_REPLY_DATA { + U32 Word[6]; + MPI2_RAID_VOL_INDICATOR RaidVolumeIndicator; + U16 VolDevHandle; + U8 VolumeState; + U8 PhysDiskNum; + MPI2_RAID_COMPATIBILITY_RESULT_STRUCT RaidCompatibilityResult; +} MPI2_RAID_ACTION_REPLY_DATA, *PTR_MPI2_RAID_ACTION_REPLY_DATA, + Mpi2RaidActionReplyData_t, *pMpi2RaidActionReplyData_t; + +/*use MPI2_RAIDVOL0_SETTING_ defines from mpi2_cnfg.h for + *MPI2_RAID_ACTION_CHANGE_VOL_WRITE_CACHE action */ + +/*RAID Action Reply Message */ +typedef struct _MPI2_RAID_ACTION_REPLY { + U8 Action; /*0x00 */ + U8 Reserved1; /*0x01 */ + U8 MsgLength; /*0x02 */ + U8 Function; /*0x03 */ + U16 VolDevHandle; /*0x04 */ + U8 PhysDiskNum; /*0x06 */ + U8 MsgFlags; /*0x07 */ + U8 VP_ID; /*0x08 */ + U8 VF_ID; /*0x09 */ + U16 Reserved2; /*0x0A */ + U16 Reserved3; /*0x0C */ + U16 IOCStatus; /*0x0E */ + U32 IOCLogInfo; /*0x10 */ + MPI2_RAID_ACTION_REPLY_DATA ActionData; /*0x14 */ +} MPI2_RAID_ACTION_REPLY, *PTR_MPI2_RAID_ACTION_REPLY, + Mpi2RaidActionReply_t, *pMpi2RaidActionReply_t; + +#endif diff --git a/drivers/scsi/mpt3sas/mpi/mpi2_sas.h b/drivers/scsi/mpt3sas/mpi/mpi2_sas.h new file mode 100644 index 000000000..afa17ff24 --- /dev/null +++ b/drivers/scsi/mpt3sas/mpi/mpi2_sas.h @@ -0,0 +1,304 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright 2000-2015 Avago Technologies. All rights reserved. + * + * + * Name: mpi2_sas.h + * Title: MPI Serial Attached SCSI structures and definitions + * Creation Date: February 9, 2007 + * + * mpi2_sas.h Version: 02.00.10 + * + * NOTE: Names (typedefs, defines, etc.) beginning with an MPI25 or Mpi25 + * prefix are for use only on MPI v2.5 products, and must not be used + * with MPI v2.0 products. Unless otherwise noted, names beginning with + * MPI2 or Mpi2 are for use with both MPI v2.0 and MPI v2.5 products. + * + * Version History + * --------------- + * + * Date Version Description + * -------- -------- ------------------------------------------------------ + * 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A. + * 06-26-07 02.00.01 Added Clear All Persistent Operation to SAS IO Unit + * Control Request. + * 10-02-08 02.00.02 Added Set IOC Parameter Operation to SAS IO Unit Control + * Request. + * 10-28-09 02.00.03 Changed the type of SGL in MPI2_SATA_PASSTHROUGH_REQUEST + * to MPI2_SGE_IO_UNION since it supports chained SGLs. + * 05-12-10 02.00.04 Modified some comments. + * 08-11-10 02.00.05 Added NCQ operations to SAS IO Unit Control. + * 11-18-11 02.00.06 Incorporating additions for MPI v2.5. + * 07-10-12 02.00.07 Added MPI2_SATA_PT_SGE_UNION for use in the SATA + * Passthrough Request message. + * 08-19-13 02.00.08 Made MPI2_SAS_OP_TRANSMIT_PORT_SELECT_SIGNAL obsolete + * for anything newer than MPI v2.0. + * 11-18-14 02.00.09 Updated copyright information. + * 03-16-15 02.00.10 Updated for MPI v2.6. + * Added MPI2_SATA_PT_REQ_PT_FLAGS_FPDMA. + * -------------------------------------------------------------------------- + */ + +#ifndef MPI2_SAS_H +#define MPI2_SAS_H + +/* + *Values for SASStatus. + */ +#define MPI2_SASSTATUS_SUCCESS (0x00) +#define MPI2_SASSTATUS_UNKNOWN_ERROR (0x01) +#define MPI2_SASSTATUS_INVALID_FRAME (0x02) +#define MPI2_SASSTATUS_UTC_BAD_DEST (0x03) +#define MPI2_SASSTATUS_UTC_BREAK_RECEIVED (0x04) +#define MPI2_SASSTATUS_UTC_CONNECT_RATE_NOT_SUPPORTED (0x05) +#define MPI2_SASSTATUS_UTC_PORT_LAYER_REQUEST (0x06) +#define MPI2_SASSTATUS_UTC_PROTOCOL_NOT_SUPPORTED (0x07) +#define MPI2_SASSTATUS_UTC_STP_RESOURCES_BUSY (0x08) +#define MPI2_SASSTATUS_UTC_WRONG_DESTINATION (0x09) +#define MPI2_SASSTATUS_SHORT_INFORMATION_UNIT (0x0A) +#define MPI2_SASSTATUS_LONG_INFORMATION_UNIT (0x0B) +#define MPI2_SASSTATUS_XFER_RDY_INCORRECT_WRITE_DATA (0x0C) +#define MPI2_SASSTATUS_XFER_RDY_REQUEST_OFFSET_ERROR (0x0D) +#define MPI2_SASSTATUS_XFER_RDY_NOT_EXPECTED (0x0E) +#define MPI2_SASSTATUS_DATA_INCORRECT_DATA_LENGTH (0x0F) +#define MPI2_SASSTATUS_DATA_TOO_MUCH_READ_DATA (0x10) +#define MPI2_SASSTATUS_DATA_OFFSET_ERROR (0x11) +#define MPI2_SASSTATUS_SDSF_NAK_RECEIVED (0x12) +#define MPI2_SASSTATUS_SDSF_CONNECTION_FAILED (0x13) +#define MPI2_SASSTATUS_INITIATOR_RESPONSE_TIMEOUT (0x14) + +/* + *Values for the SAS DeviceInfo field used in SAS Device Status Change Event + *data and SAS Configuration pages. + */ +#define MPI2_SAS_DEVICE_INFO_SEP (0x00004000) +#define MPI2_SAS_DEVICE_INFO_ATAPI_DEVICE (0x00002000) +#define MPI2_SAS_DEVICE_INFO_LSI_DEVICE (0x00001000) +#define MPI2_SAS_DEVICE_INFO_DIRECT_ATTACH (0x00000800) +#define MPI2_SAS_DEVICE_INFO_SSP_TARGET (0x00000400) +#define MPI2_SAS_DEVICE_INFO_STP_TARGET (0x00000200) +#define MPI2_SAS_DEVICE_INFO_SMP_TARGET (0x00000100) +#define MPI2_SAS_DEVICE_INFO_SATA_DEVICE (0x00000080) +#define MPI2_SAS_DEVICE_INFO_SSP_INITIATOR (0x00000040) +#define MPI2_SAS_DEVICE_INFO_STP_INITIATOR (0x00000020) +#define MPI2_SAS_DEVICE_INFO_SMP_INITIATOR (0x00000010) +#define MPI2_SAS_DEVICE_INFO_SATA_HOST (0x00000008) + +#define MPI2_SAS_DEVICE_INFO_MASK_DEVICE_TYPE (0x00000007) +#define MPI2_SAS_DEVICE_INFO_NO_DEVICE (0x00000000) +#define MPI2_SAS_DEVICE_INFO_END_DEVICE (0x00000001) +#define MPI2_SAS_DEVICE_INFO_EDGE_EXPANDER (0x00000002) +#define MPI2_SAS_DEVICE_INFO_FANOUT_EXPANDER (0x00000003) + +/***************************************************************************** +* +* SAS Messages +* +*****************************************************************************/ + +/**************************************************************************** +* SMP Passthrough messages +****************************************************************************/ + +/*SMP Passthrough Request Message */ +typedef struct _MPI2_SMP_PASSTHROUGH_REQUEST { + U8 PassthroughFlags; /*0x00 */ + U8 PhysicalPort; /*0x01 */ + U8 ChainOffset; /*0x02 */ + U8 Function; /*0x03 */ + U16 RequestDataLength; /*0x04 */ + U8 SGLFlags; /*0x06*//*MPI v2.0 only. Reserved on MPI v2.5*/ + U8 MsgFlags; /*0x07 */ + U8 VP_ID; /*0x08 */ + U8 VF_ID; /*0x09 */ + U16 Reserved1; /*0x0A */ + U32 Reserved2; /*0x0C */ + U64 SASAddress; /*0x10 */ + U32 Reserved3; /*0x18 */ + U32 Reserved4; /*0x1C */ + MPI2_SIMPLE_SGE_UNION SGL;/*0x20 */ +} MPI2_SMP_PASSTHROUGH_REQUEST, *PTR_MPI2_SMP_PASSTHROUGH_REQUEST, + Mpi2SmpPassthroughRequest_t, *pMpi2SmpPassthroughRequest_t; + +/*values for PassthroughFlags field */ +#define MPI2_SMP_PT_REQ_PT_FLAGS_IMMEDIATE (0x80) + +/*MPI v2.0: use MPI2_SGLFLAGS_ defines from mpi2.h for the SGLFlags field */ + +/*SMP Passthrough Reply Message */ +typedef struct _MPI2_SMP_PASSTHROUGH_REPLY { + U8 PassthroughFlags; /*0x00 */ + U8 PhysicalPort; /*0x01 */ + U8 MsgLength; /*0x02 */ + U8 Function; /*0x03 */ + U16 ResponseDataLength; /*0x04 */ + U8 SGLFlags; /*0x06 */ + U8 MsgFlags; /*0x07 */ + U8 VP_ID; /*0x08 */ + U8 VF_ID; /*0x09 */ + U16 Reserved1; /*0x0A */ + U8 Reserved2; /*0x0C */ + U8 SASStatus; /*0x0D */ + U16 IOCStatus; /*0x0E */ + U32 IOCLogInfo; /*0x10 */ + U32 Reserved3; /*0x14 */ + U8 ResponseData[4]; /*0x18 */ +} MPI2_SMP_PASSTHROUGH_REPLY, *PTR_MPI2_SMP_PASSTHROUGH_REPLY, + Mpi2SmpPassthroughReply_t, *pMpi2SmpPassthroughReply_t; + +/*values for PassthroughFlags field */ +#define MPI2_SMP_PT_REPLY_PT_FLAGS_IMMEDIATE (0x80) + +/*values for SASStatus field are at the top of this file */ + +/**************************************************************************** +* SATA Passthrough messages +****************************************************************************/ + +typedef union _MPI2_SATA_PT_SGE_UNION { + MPI2_SGE_SIMPLE_UNION MpiSimple; /*MPI v2.0 only */ + MPI2_SGE_CHAIN_UNION MpiChain; /*MPI v2.0 only */ + MPI2_IEEE_SGE_SIMPLE_UNION IeeeSimple; + MPI2_IEEE_SGE_CHAIN_UNION IeeeChain; /*MPI v2.0 only */ + MPI25_IEEE_SGE_CHAIN64 IeeeChain64; /*MPI v2.5 only */ +} MPI2_SATA_PT_SGE_UNION, *PTR_MPI2_SATA_PT_SGE_UNION, + Mpi2SataPTSGEUnion_t, *pMpi2SataPTSGEUnion_t; + +/*SATA Passthrough Request Message */ +typedef struct _MPI2_SATA_PASSTHROUGH_REQUEST { + U16 DevHandle; /*0x00 */ + U8 ChainOffset; /*0x02 */ + U8 Function; /*0x03 */ + U16 PassthroughFlags; /*0x04 */ + U8 SGLFlags; /*0x06*//*MPI v2.0 only. Reserved on MPI v2.5*/ + U8 MsgFlags; /*0x07 */ + U8 VP_ID; /*0x08 */ + U8 VF_ID; /*0x09 */ + U16 Reserved1; /*0x0A */ + U32 Reserved2; /*0x0C */ + U32 Reserved3; /*0x10 */ + U32 Reserved4; /*0x14 */ + U32 DataLength; /*0x18 */ + U8 CommandFIS[20]; /*0x1C */ + MPI2_SATA_PT_SGE_UNION SGL;/*0x30*//*MPI v2.5: IEEE 64 elements only*/ +} MPI2_SATA_PASSTHROUGH_REQUEST, *PTR_MPI2_SATA_PASSTHROUGH_REQUEST, + Mpi2SataPassthroughRequest_t, + *pMpi2SataPassthroughRequest_t; + +/*values for PassthroughFlags field */ +#define MPI2_SATA_PT_REQ_PT_FLAGS_EXECUTE_DIAG (0x0100) +#define MPI2_SATA_PT_REQ_PT_FLAGS_FPDMA (0x0040) +#define MPI2_SATA_PT_REQ_PT_FLAGS_DMA (0x0020) +#define MPI2_SATA_PT_REQ_PT_FLAGS_PIO (0x0010) +#define MPI2_SATA_PT_REQ_PT_FLAGS_UNSPECIFIED_VU (0x0004) +#define MPI2_SATA_PT_REQ_PT_FLAGS_WRITE (0x0002) +#define MPI2_SATA_PT_REQ_PT_FLAGS_READ (0x0001) + +/*MPI v2.0: use MPI2_SGLFLAGS_ defines from mpi2.h for the SGLFlags field */ + +/*SATA Passthrough Reply Message */ +typedef struct _MPI2_SATA_PASSTHROUGH_REPLY { + U16 DevHandle; /*0x00 */ + U8 MsgLength; /*0x02 */ + U8 Function; /*0x03 */ + U16 PassthroughFlags; /*0x04 */ + U8 SGLFlags; /*0x06 */ + U8 MsgFlags; /*0x07 */ + U8 VP_ID; /*0x08 */ + U8 VF_ID; /*0x09 */ + U16 Reserved1; /*0x0A */ + U8 Reserved2; /*0x0C */ + U8 SASStatus; /*0x0D */ + U16 IOCStatus; /*0x0E */ + U32 IOCLogInfo; /*0x10 */ + U8 StatusFIS[20]; /*0x14 */ + U32 StatusControlRegisters; /*0x28 */ + U32 TransferCount; /*0x2C */ +} MPI2_SATA_PASSTHROUGH_REPLY, *PTR_MPI2_SATA_PASSTHROUGH_REPLY, + Mpi2SataPassthroughReply_t, *pMpi2SataPassthroughReply_t; + +/*values for SASStatus field are at the top of this file */ + +/**************************************************************************** +* SAS IO Unit Control messages +* (MPI v2.5 and earlier only. +* Replaced by IO Unit Control messages in MPI v2.6 and later.) +****************************************************************************/ + +/*SAS IO Unit Control Request Message */ +typedef struct _MPI2_SAS_IOUNIT_CONTROL_REQUEST { + U8 Operation; /*0x00 */ + U8 Reserved1; /*0x01 */ + U8 ChainOffset; /*0x02 */ + U8 Function; /*0x03 */ + U16 DevHandle; /*0x04 */ + U8 IOCParameter; /*0x06 */ + U8 MsgFlags; /*0x07 */ + U8 VP_ID; /*0x08 */ + U8 VF_ID; /*0x09 */ + U16 Reserved3; /*0x0A */ + U16 Reserved4; /*0x0C */ + U8 PhyNum; /*0x0E */ + U8 PrimFlags; /*0x0F */ + U32 Primitive; /*0x10 */ + U8 LookupMethod; /*0x14 */ + U8 Reserved5; /*0x15 */ + U16 SlotNumber; /*0x16 */ + U64 LookupAddress; /*0x18 */ + U32 IOCParameterValue; /*0x20 */ + U32 Reserved7; /*0x24 */ + U32 Reserved8; /*0x28 */ +} MPI2_SAS_IOUNIT_CONTROL_REQUEST, + *PTR_MPI2_SAS_IOUNIT_CONTROL_REQUEST, + Mpi2SasIoUnitControlRequest_t, + *pMpi2SasIoUnitControlRequest_t; + +/*values for the Operation field */ +#define MPI2_SAS_OP_CLEAR_ALL_PERSISTENT (0x02) +#define MPI2_SAS_OP_PHY_LINK_RESET (0x06) +#define MPI2_SAS_OP_PHY_HARD_RESET (0x07) +#define MPI2_SAS_OP_PHY_CLEAR_ERROR_LOG (0x08) +#define MPI2_SAS_OP_SEND_PRIMITIVE (0x0A) +#define MPI2_SAS_OP_FORCE_FULL_DISCOVERY (0x0B) +#define MPI2_SAS_OP_TRANSMIT_PORT_SELECT_SIGNAL (0x0C) /* MPI v2.0 only */ +#define MPI2_SAS_OP_REMOVE_DEVICE (0x0D) +#define MPI2_SAS_OP_LOOKUP_MAPPING (0x0E) +#define MPI2_SAS_OP_SET_IOC_PARAMETER (0x0F) +#define MPI25_SAS_OP_ENABLE_FP_DEVICE (0x10) +#define MPI25_SAS_OP_DISABLE_FP_DEVICE (0x11) +#define MPI25_SAS_OP_ENABLE_FP_ALL (0x12) +#define MPI25_SAS_OP_DISABLE_FP_ALL (0x13) +#define MPI2_SAS_OP_DEV_ENABLE_NCQ (0x14) +#define MPI2_SAS_OP_DEV_DISABLE_NCQ (0x15) +#define MPI2_SAS_OP_PRODUCT_SPECIFIC_MIN (0x80) + +/*values for the PrimFlags field */ +#define MPI2_SAS_PRIMFLAGS_SINGLE (0x08) +#define MPI2_SAS_PRIMFLAGS_TRIPLE (0x02) +#define MPI2_SAS_PRIMFLAGS_REDUNDANT (0x01) + +/*values for the LookupMethod field */ +#define MPI2_SAS_LOOKUP_METHOD_SAS_ADDRESS (0x01) +#define MPI2_SAS_LOOKUP_METHOD_SAS_ENCLOSURE_SLOT (0x02) +#define MPI2_SAS_LOOKUP_METHOD_SAS_DEVICE_NAME (0x03) + +/*SAS IO Unit Control Reply Message */ +typedef struct _MPI2_SAS_IOUNIT_CONTROL_REPLY { + U8 Operation; /*0x00 */ + U8 Reserved1; /*0x01 */ + U8 MsgLength; /*0x02 */ + U8 Function; /*0x03 */ + U16 DevHandle; /*0x04 */ + U8 IOCParameter; /*0x06 */ + U8 MsgFlags; /*0x07 */ + U8 VP_ID; /*0x08 */ + U8 VF_ID; /*0x09 */ + U16 Reserved3; /*0x0A */ + U16 Reserved4; /*0x0C */ + U16 IOCStatus; /*0x0E */ + U32 IOCLogInfo; /*0x10 */ +} MPI2_SAS_IOUNIT_CONTROL_REPLY, + *PTR_MPI2_SAS_IOUNIT_CONTROL_REPLY, + Mpi2SasIoUnitControlReply_t, *pMpi2SasIoUnitControlReply_t; + +#endif diff --git a/drivers/scsi/mpt3sas/mpi/mpi2_tool.h b/drivers/scsi/mpt3sas/mpi/mpi2_tool.h new file mode 100644 index 000000000..629296ee9 --- /dev/null +++ b/drivers/scsi/mpt3sas/mpi/mpi2_tool.h @@ -0,0 +1,496 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright 2000-2014 Avago Technologies. All rights reserved. + * + * + * Name: mpi2_tool.h + * Title: MPI diagnostic tool structures and definitions + * Creation Date: March 26, 2007 + * + * mpi2_tool.h Version: 02.00.14 + * + * Version History + * --------------- + * + * Date Version Description + * -------- -------- ------------------------------------------------------ + * 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A. + * 12-18-07 02.00.01 Added Diagnostic Buffer Post and Diagnostic Release + * structures and defines. + * 02-29-08 02.00.02 Modified various names to make them 32-character unique. + * 05-06-09 02.00.03 Added ISTWI Read Write Tool and Diagnostic CLI Tool. + * 07-30-09 02.00.04 Added ExtendedType field to DiagnosticBufferPost request + * and reply messages. + * Added MPI2_DIAG_BUF_TYPE_EXTENDED. + * Incremented MPI2_DIAG_BUF_TYPE_COUNT. + * 05-12-10 02.00.05 Added Diagnostic Data Upload tool. + * 08-11-10 02.00.06 Added defines that were missing for Diagnostic Buffer + * Post Request. + * 05-25-11 02.00.07 Added Flags field and related defines to + * MPI2_TOOLBOX_ISTWI_READ_WRITE_REQUEST. + * 11-18-11 02.00.08 Incorporating additions for MPI v2.5. + * 07-10-12 02.00.09 Add MPI v2.5 Toolbox Diagnostic CLI Tool Request + * message. + * 07-26-12 02.00.10 Modified MPI2_TOOLBOX_DIAGNOSTIC_CLI_REQUEST so that + * it uses MPI Chain SGE as well as MPI Simple SGE. + * 08-19-13 02.00.11 Added MPI2_TOOLBOX_TEXT_DISPLAY_TOOL and related info. + * 01-08-14 02.00.12 Added MPI2_TOOLBOX_CLEAN_BIT26_PRODUCT_SPECIFIC. + * 11-18-14 02.00.13 Updated copyright information. + * 08-25-16 02.00.14 Added new values for the Flags field of Toolbox Clean + * Tool Request Message. + * -------------------------------------------------------------------------- + */ + +#ifndef MPI2_TOOL_H +#define MPI2_TOOL_H + +/***************************************************************************** +* +* Toolbox Messages +* +*****************************************************************************/ + +/*defines for the Tools */ +#define MPI2_TOOLBOX_CLEAN_TOOL (0x00) +#define MPI2_TOOLBOX_MEMORY_MOVE_TOOL (0x01) +#define MPI2_TOOLBOX_DIAG_DATA_UPLOAD_TOOL (0x02) +#define MPI2_TOOLBOX_ISTWI_READ_WRITE_TOOL (0x03) +#define MPI2_TOOLBOX_BEACON_TOOL (0x05) +#define MPI2_TOOLBOX_DIAGNOSTIC_CLI_TOOL (0x06) +#define MPI2_TOOLBOX_TEXT_DISPLAY_TOOL (0x07) + +/**************************************************************************** +* Toolbox reply +****************************************************************************/ + +typedef struct _MPI2_TOOLBOX_REPLY { + U8 Tool; /*0x00 */ + U8 Reserved1; /*0x01 */ + U8 MsgLength; /*0x02 */ + U8 Function; /*0x03 */ + U16 Reserved2; /*0x04 */ + U8 Reserved3; /*0x06 */ + U8 MsgFlags; /*0x07 */ + U8 VP_ID; /*0x08 */ + U8 VF_ID; /*0x09 */ + U16 Reserved4; /*0x0A */ + U16 Reserved5; /*0x0C */ + U16 IOCStatus; /*0x0E */ + U32 IOCLogInfo; /*0x10 */ +} MPI2_TOOLBOX_REPLY, *PTR_MPI2_TOOLBOX_REPLY, + Mpi2ToolboxReply_t, *pMpi2ToolboxReply_t; + +/**************************************************************************** +* Toolbox Clean Tool request +****************************************************************************/ + +typedef struct _MPI2_TOOLBOX_CLEAN_REQUEST { + U8 Tool; /*0x00 */ + U8 Reserved1; /*0x01 */ + U8 ChainOffset; /*0x02 */ + U8 Function; /*0x03 */ + U16 Reserved2; /*0x04 */ + U8 Reserved3; /*0x06 */ + U8 MsgFlags; /*0x07 */ + U8 VP_ID; /*0x08 */ + U8 VF_ID; /*0x09 */ + U16 Reserved4; /*0x0A */ + U32 Flags; /*0x0C */ +} MPI2_TOOLBOX_CLEAN_REQUEST, *PTR_MPI2_TOOLBOX_CLEAN_REQUEST, + Mpi2ToolboxCleanRequest_t, *pMpi2ToolboxCleanRequest_t; + +/*values for the Flags field */ +#define MPI2_TOOLBOX_CLEAN_BOOT_SERVICES (0x80000000) +#define MPI2_TOOLBOX_CLEAN_PERSIST_MANUFACT_PAGES (0x40000000) +#define MPI2_TOOLBOX_CLEAN_OTHER_PERSIST_PAGES (0x20000000) +#define MPI2_TOOLBOX_CLEAN_FW_CURRENT (0x10000000) +#define MPI2_TOOLBOX_CLEAN_FW_BACKUP (0x08000000) +#define MPI2_TOOLBOX_CLEAN_BIT26_PRODUCT_SPECIFIC (0x04000000) +#define MPI2_TOOLBOX_CLEAN_MEGARAID (0x02000000) +#define MPI2_TOOLBOX_CLEAN_INITIALIZATION (0x01000000) +#define MPI2_TOOLBOX_CLEAN_SBR (0x00800000) +#define MPI2_TOOLBOX_CLEAN_SBR_BACKUP (0x00400000) +#define MPI2_TOOLBOX_CLEAN_HIIM (0x00200000) +#define MPI2_TOOLBOX_CLEAN_HIIA (0x00100000) +#define MPI2_TOOLBOX_CLEAN_CTLR (0x00080000) +#define MPI2_TOOLBOX_CLEAN_IMR_FIRMWARE (0x00040000) +#define MPI2_TOOLBOX_CLEAN_MR_NVDATA (0x00020000) +#define MPI2_TOOLBOX_CLEAN_RESERVED_5_16 (0x0001FFE0) +#define MPI2_TOOLBOX_CLEAN_ALL_BUT_MPB (0x00000010) +#define MPI2_TOOLBOX_CLEAN_ENTIRE_FLASH (0x00000008) +#define MPI2_TOOLBOX_CLEAN_FLASH (0x00000004) +#define MPI2_TOOLBOX_CLEAN_SEEPROM (0x00000002) +#define MPI2_TOOLBOX_CLEAN_NVSRAM (0x00000001) + +/**************************************************************************** +* Toolbox Memory Move request +****************************************************************************/ + +typedef struct _MPI2_TOOLBOX_MEM_MOVE_REQUEST { + U8 Tool; /*0x00 */ + U8 Reserved1; /*0x01 */ + U8 ChainOffset; /*0x02 */ + U8 Function; /*0x03 */ + U16 Reserved2; /*0x04 */ + U8 Reserved3; /*0x06 */ + U8 MsgFlags; /*0x07 */ + U8 VP_ID; /*0x08 */ + U8 VF_ID; /*0x09 */ + U16 Reserved4; /*0x0A */ + MPI2_SGE_SIMPLE_UNION SGL; /*0x0C */ +} MPI2_TOOLBOX_MEM_MOVE_REQUEST, *PTR_MPI2_TOOLBOX_MEM_MOVE_REQUEST, + Mpi2ToolboxMemMoveRequest_t, *pMpi2ToolboxMemMoveRequest_t; + +/**************************************************************************** +* Toolbox Diagnostic Data Upload request +****************************************************************************/ + +typedef struct _MPI2_TOOLBOX_DIAG_DATA_UPLOAD_REQUEST { + U8 Tool; /*0x00 */ + U8 Reserved1; /*0x01 */ + U8 ChainOffset; /*0x02 */ + U8 Function; /*0x03 */ + U16 Reserved2; /*0x04 */ + U8 Reserved3; /*0x06 */ + U8 MsgFlags; /*0x07 */ + U8 VP_ID; /*0x08 */ + U8 VF_ID; /*0x09 */ + U16 Reserved4; /*0x0A */ + U8 SGLFlags; /*0x0C */ + U8 Reserved5; /*0x0D */ + U16 Reserved6; /*0x0E */ + U32 Flags; /*0x10 */ + U32 DataLength; /*0x14 */ + MPI2_SGE_SIMPLE_UNION SGL; /*0x18 */ +} MPI2_TOOLBOX_DIAG_DATA_UPLOAD_REQUEST, + *PTR_MPI2_TOOLBOX_DIAG_DATA_UPLOAD_REQUEST, + Mpi2ToolboxDiagDataUploadRequest_t, + *pMpi2ToolboxDiagDataUploadRequest_t; + +/*use MPI2_SGLFLAGS_ defines from mpi2.h for the SGLFlags field */ + +typedef struct _MPI2_DIAG_DATA_UPLOAD_HEADER { + U32 DiagDataLength; /*00h */ + U8 FormatCode; /*04h */ + U8 Reserved1; /*05h */ + U16 Reserved2; /*06h */ +} MPI2_DIAG_DATA_UPLOAD_HEADER, *PTR_MPI2_DIAG_DATA_UPLOAD_HEADER, + Mpi2DiagDataUploadHeader_t, *pMpi2DiagDataUploadHeader_t; + +/**************************************************************************** +* Toolbox ISTWI Read Write Tool +****************************************************************************/ + +/*Toolbox ISTWI Read Write Tool request message */ +typedef struct _MPI2_TOOLBOX_ISTWI_READ_WRITE_REQUEST { + U8 Tool; /*0x00 */ + U8 Reserved1; /*0x01 */ + U8 ChainOffset; /*0x02 */ + U8 Function; /*0x03 */ + U16 Reserved2; /*0x04 */ + U8 Reserved3; /*0x06 */ + U8 MsgFlags; /*0x07 */ + U8 VP_ID; /*0x08 */ + U8 VF_ID; /*0x09 */ + U16 Reserved4; /*0x0A */ + U32 Reserved5; /*0x0C */ + U32 Reserved6; /*0x10 */ + U8 DevIndex; /*0x14 */ + U8 Action; /*0x15 */ + U8 SGLFlags; /*0x16 */ + U8 Flags; /*0x17 */ + U16 TxDataLength; /*0x18 */ + U16 RxDataLength; /*0x1A */ + U32 Reserved8; /*0x1C */ + U32 Reserved9; /*0x20 */ + U32 Reserved10; /*0x24 */ + U32 Reserved11; /*0x28 */ + U32 Reserved12; /*0x2C */ + MPI2_SGE_SIMPLE_UNION SGL; /*0x30 */ +} MPI2_TOOLBOX_ISTWI_READ_WRITE_REQUEST, + *PTR_MPI2_TOOLBOX_ISTWI_READ_WRITE_REQUEST, + Mpi2ToolboxIstwiReadWriteRequest_t, + *pMpi2ToolboxIstwiReadWriteRequest_t; + +/*values for the Action field */ +#define MPI2_TOOL_ISTWI_ACTION_READ_DATA (0x01) +#define MPI2_TOOL_ISTWI_ACTION_WRITE_DATA (0x02) +#define MPI2_TOOL_ISTWI_ACTION_SEQUENCE (0x03) +#define MPI2_TOOL_ISTWI_ACTION_RESERVE_BUS (0x10) +#define MPI2_TOOL_ISTWI_ACTION_RELEASE_BUS (0x11) +#define MPI2_TOOL_ISTWI_ACTION_RESET (0x12) + +/*use MPI2_SGLFLAGS_ defines from mpi2.h for the SGLFlags field */ + +/*values for the Flags field */ +#define MPI2_TOOL_ISTWI_FLAG_AUTO_RESERVE_RELEASE (0x80) +#define MPI2_TOOL_ISTWI_FLAG_PAGE_ADDR_MASK (0x07) + +/*Toolbox ISTWI Read Write Tool reply message */ +typedef struct _MPI2_TOOLBOX_ISTWI_REPLY { + U8 Tool; /*0x00 */ + U8 Reserved1; /*0x01 */ + U8 MsgLength; /*0x02 */ + U8 Function; /*0x03 */ + U16 Reserved2; /*0x04 */ + U8 Reserved3; /*0x06 */ + U8 MsgFlags; /*0x07 */ + U8 VP_ID; /*0x08 */ + U8 VF_ID; /*0x09 */ + U16 Reserved4; /*0x0A */ + U16 Reserved5; /*0x0C */ + U16 IOCStatus; /*0x0E */ + U32 IOCLogInfo; /*0x10 */ + U8 DevIndex; /*0x14 */ + U8 Action; /*0x15 */ + U8 IstwiStatus; /*0x16 */ + U8 Reserved6; /*0x17 */ + U16 TxDataCount; /*0x18 */ + U16 RxDataCount; /*0x1A */ +} MPI2_TOOLBOX_ISTWI_REPLY, *PTR_MPI2_TOOLBOX_ISTWI_REPLY, + Mpi2ToolboxIstwiReply_t, *pMpi2ToolboxIstwiReply_t; + +/**************************************************************************** +* Toolbox Beacon Tool request +****************************************************************************/ + +typedef struct _MPI2_TOOLBOX_BEACON_REQUEST { + U8 Tool; /*0x00 */ + U8 Reserved1; /*0x01 */ + U8 ChainOffset; /*0x02 */ + U8 Function; /*0x03 */ + U16 Reserved2; /*0x04 */ + U8 Reserved3; /*0x06 */ + U8 MsgFlags; /*0x07 */ + U8 VP_ID; /*0x08 */ + U8 VF_ID; /*0x09 */ + U16 Reserved4; /*0x0A */ + U8 Reserved5; /*0x0C */ + U8 PhysicalPort; /*0x0D */ + U8 Reserved6; /*0x0E */ + U8 Flags; /*0x0F */ +} MPI2_TOOLBOX_BEACON_REQUEST, *PTR_MPI2_TOOLBOX_BEACON_REQUEST, + Mpi2ToolboxBeaconRequest_t, *pMpi2ToolboxBeaconRequest_t; + +/*values for the Flags field */ +#define MPI2_TOOLBOX_FLAGS_BEACONMODE_OFF (0x00) +#define MPI2_TOOLBOX_FLAGS_BEACONMODE_ON (0x01) + +/**************************************************************************** +* Toolbox Diagnostic CLI Tool +****************************************************************************/ + +#define MPI2_TOOLBOX_DIAG_CLI_CMD_LENGTH (0x5C) + +/*MPI v2.0 Toolbox Diagnostic CLI Tool request message */ +typedef struct _MPI2_TOOLBOX_DIAGNOSTIC_CLI_REQUEST { + U8 Tool; /*0x00 */ + U8 Reserved1; /*0x01 */ + U8 ChainOffset; /*0x02 */ + U8 Function; /*0x03 */ + U16 Reserved2; /*0x04 */ + U8 Reserved3; /*0x06 */ + U8 MsgFlags; /*0x07 */ + U8 VP_ID; /*0x08 */ + U8 VF_ID; /*0x09 */ + U16 Reserved4; /*0x0A */ + U8 SGLFlags; /*0x0C */ + U8 Reserved5; /*0x0D */ + U16 Reserved6; /*0x0E */ + U32 DataLength; /*0x10 */ + U8 DiagnosticCliCommand[MPI2_TOOLBOX_DIAG_CLI_CMD_LENGTH];/*0x14 */ + MPI2_MPI_SGE_IO_UNION SGL; /*0x70 */ +} MPI2_TOOLBOX_DIAGNOSTIC_CLI_REQUEST, + *PTR_MPI2_TOOLBOX_DIAGNOSTIC_CLI_REQUEST, + Mpi2ToolboxDiagnosticCliRequest_t, + *pMpi2ToolboxDiagnosticCliRequest_t; + +/*use MPI2_SGLFLAGS_ defines from mpi2.h for the SGLFlags field */ + +/*MPI v2.5 Toolbox Diagnostic CLI Tool request message */ +typedef struct _MPI25_TOOLBOX_DIAGNOSTIC_CLI_REQUEST { + U8 Tool; /*0x00 */ + U8 Reserved1; /*0x01 */ + U8 ChainOffset; /*0x02 */ + U8 Function; /*0x03 */ + U16 Reserved2; /*0x04 */ + U8 Reserved3; /*0x06 */ + U8 MsgFlags; /*0x07 */ + U8 VP_ID; /*0x08 */ + U8 VF_ID; /*0x09 */ + U16 Reserved4; /*0x0A */ + U32 Reserved5; /*0x0C */ + U32 DataLength; /*0x10 */ + U8 DiagnosticCliCommand[MPI2_TOOLBOX_DIAG_CLI_CMD_LENGTH];/*0x14 */ + MPI25_SGE_IO_UNION SGL; /* 0x70 */ +} MPI25_TOOLBOX_DIAGNOSTIC_CLI_REQUEST, + *PTR_MPI25_TOOLBOX_DIAGNOSTIC_CLI_REQUEST, + Mpi25ToolboxDiagnosticCliRequest_t, + *pMpi25ToolboxDiagnosticCliRequest_t; + +/*Toolbox Diagnostic CLI Tool reply message */ +typedef struct _MPI2_TOOLBOX_DIAGNOSTIC_CLI_REPLY { + U8 Tool; /*0x00 */ + U8 Reserved1; /*0x01 */ + U8 MsgLength; /*0x02 */ + U8 Function; /*0x03 */ + U16 Reserved2; /*0x04 */ + U8 Reserved3; /*0x06 */ + U8 MsgFlags; /*0x07 */ + U8 VP_ID; /*0x08 */ + U8 VF_ID; /*0x09 */ + U16 Reserved4; /*0x0A */ + U16 Reserved5; /*0x0C */ + U16 IOCStatus; /*0x0E */ + U32 IOCLogInfo; /*0x10 */ + U32 ReturnedDataLength; /*0x14 */ +} MPI2_TOOLBOX_DIAGNOSTIC_CLI_REPLY, + *PTR_MPI2_TOOLBOX_DIAG_CLI_REPLY, + Mpi2ToolboxDiagnosticCliReply_t, + *pMpi2ToolboxDiagnosticCliReply_t; + + +/**************************************************************************** +* Toolbox Console Text Display Tool +****************************************************************************/ + +/* Toolbox Console Text Display Tool request message */ +typedef struct _MPI2_TOOLBOX_TEXT_DISPLAY_REQUEST { + U8 Tool; /* 0x00 */ + U8 Reserved1; /* 0x01 */ + U8 ChainOffset; /* 0x02 */ + U8 Function; /* 0x03 */ + U16 Reserved2; /* 0x04 */ + U8 Reserved3; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U8 VP_ID; /* 0x08 */ + U8 VF_ID; /* 0x09 */ + U16 Reserved4; /* 0x0A */ + U8 Console; /* 0x0C */ + U8 Flags; /* 0x0D */ + U16 Reserved6; /* 0x0E */ + U8 TextToDisplay[4]; /* 0x10 */ +} MPI2_TOOLBOX_TEXT_DISPLAY_REQUEST, +*PTR_MPI2_TOOLBOX_TEXT_DISPLAY_REQUEST, +Mpi2ToolboxTextDisplayRequest_t, +*pMpi2ToolboxTextDisplayRequest_t; + +/* defines for the Console field */ +#define MPI2_TOOLBOX_CONSOLE_TYPE_MASK (0xF0) +#define MPI2_TOOLBOX_CONSOLE_TYPE_DEFAULT (0x00) +#define MPI2_TOOLBOX_CONSOLE_TYPE_UART (0x10) +#define MPI2_TOOLBOX_CONSOLE_TYPE_ETHERNET (0x20) + +#define MPI2_TOOLBOX_CONSOLE_NUMBER_MASK (0x0F) + +/* defines for the Flags field */ +#define MPI2_TOOLBOX_CONSOLE_FLAG_TIMESTAMP (0x01) + + + +/***************************************************************************** +* +* Diagnostic Buffer Messages +* +*****************************************************************************/ + +/**************************************************************************** +* Diagnostic Buffer Post request +****************************************************************************/ + +typedef struct _MPI2_DIAG_BUFFER_POST_REQUEST { + U8 ExtendedType; /*0x00 */ + U8 BufferType; /*0x01 */ + U8 ChainOffset; /*0x02 */ + U8 Function; /*0x03 */ + U16 Reserved2; /*0x04 */ + U8 Reserved3; /*0x06 */ + U8 MsgFlags; /*0x07 */ + U8 VP_ID; /*0x08 */ + U8 VF_ID; /*0x09 */ + U16 Reserved4; /*0x0A */ + U64 BufferAddress; /*0x0C */ + U32 BufferLength; /*0x14 */ + U32 Reserved5; /*0x18 */ + U32 Reserved6; /*0x1C */ + U32 Flags; /*0x20 */ + U32 ProductSpecific[23]; /*0x24 */ +} MPI2_DIAG_BUFFER_POST_REQUEST, *PTR_MPI2_DIAG_BUFFER_POST_REQUEST, + Mpi2DiagBufferPostRequest_t, *pMpi2DiagBufferPostRequest_t; + +/*values for the ExtendedType field */ +#define MPI2_DIAG_EXTENDED_TYPE_UTILIZATION (0x02) + +/*values for the BufferType field */ +#define MPI2_DIAG_BUF_TYPE_TRACE (0x00) +#define MPI2_DIAG_BUF_TYPE_SNAPSHOT (0x01) +#define MPI2_DIAG_BUF_TYPE_EXTENDED (0x02) +/*count of the number of buffer types */ +#define MPI2_DIAG_BUF_TYPE_COUNT (0x03) + +/*values for the Flags field */ +#define MPI2_DIAG_BUF_FLAG_RELEASE_ON_FULL (0x00000002) +#define MPI2_DIAG_BUF_FLAG_IMMEDIATE_RELEASE (0x00000001) + +/**************************************************************************** +* Diagnostic Buffer Post reply +****************************************************************************/ + +typedef struct _MPI2_DIAG_BUFFER_POST_REPLY { + U8 ExtendedType; /*0x00 */ + U8 BufferType; /*0x01 */ + U8 MsgLength; /*0x02 */ + U8 Function; /*0x03 */ + U16 Reserved2; /*0x04 */ + U8 Reserved3; /*0x06 */ + U8 MsgFlags; /*0x07 */ + U8 VP_ID; /*0x08 */ + U8 VF_ID; /*0x09 */ + U16 Reserved4; /*0x0A */ + U16 Reserved5; /*0x0C */ + U16 IOCStatus; /*0x0E */ + U32 IOCLogInfo; /*0x10 */ + U32 TransferLength; /*0x14 */ +} MPI2_DIAG_BUFFER_POST_REPLY, *PTR_MPI2_DIAG_BUFFER_POST_REPLY, + Mpi2DiagBufferPostReply_t, *pMpi2DiagBufferPostReply_t; + +/**************************************************************************** +* Diagnostic Release request +****************************************************************************/ + +typedef struct _MPI2_DIAG_RELEASE_REQUEST { + U8 Reserved1; /*0x00 */ + U8 BufferType; /*0x01 */ + U8 ChainOffset; /*0x02 */ + U8 Function; /*0x03 */ + U16 Reserved2; /*0x04 */ + U8 Reserved3; /*0x06 */ + U8 MsgFlags; /*0x07 */ + U8 VP_ID; /*0x08 */ + U8 VF_ID; /*0x09 */ + U16 Reserved4; /*0x0A */ +} MPI2_DIAG_RELEASE_REQUEST, *PTR_MPI2_DIAG_RELEASE_REQUEST, + Mpi2DiagReleaseRequest_t, *pMpi2DiagReleaseRequest_t; + +/**************************************************************************** +* Diagnostic Buffer Post reply +****************************************************************************/ + +typedef struct _MPI2_DIAG_RELEASE_REPLY { + U8 Reserved1; /*0x00 */ + U8 BufferType; /*0x01 */ + U8 MsgLength; /*0x02 */ + U8 Function; /*0x03 */ + U16 Reserved2; /*0x04 */ + U8 Reserved3; /*0x06 */ + U8 MsgFlags; /*0x07 */ + U8 VP_ID; /*0x08 */ + U8 VF_ID; /*0x09 */ + U16 Reserved4; /*0x0A */ + U16 Reserved5; /*0x0C */ + U16 IOCStatus; /*0x0E */ + U32 IOCLogInfo; /*0x10 */ +} MPI2_DIAG_RELEASE_REPLY, *PTR_MPI2_DIAG_RELEASE_REPLY, + Mpi2DiagReleaseReply_t, *pMpi2DiagReleaseReply_t; + +#endif diff --git a/drivers/scsi/mpt3sas/mpi/mpi2_type.h b/drivers/scsi/mpt3sas/mpi/mpi2_type.h new file mode 100644 index 000000000..36494439a --- /dev/null +++ b/drivers/scsi/mpt3sas/mpi/mpi2_type.h @@ -0,0 +1,58 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright 2000-2014 Avago Technologies. All rights reserved. + * + * + * Name: mpi2_type.h + * Title: MPI basic type definitions + * Creation Date: August 16, 2006 + * + * mpi2_type.h Version: 02.00.01 + * + * Version History + * --------------- + * + * Date Version Description + * -------- -------- ------------------------------------------------------ + * 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A. + * 11-18-14 02.00.01 Updated copyright information. + * -------------------------------------------------------------------------- + */ + +#ifndef MPI2_TYPE_H +#define MPI2_TYPE_H + +/******************************************************************************* + * Define * if it hasn't already been defined. By default + * * is defined to be a near pointer. MPI2_POINTER can be defined as + * a far pointer by defining * as "far *" before this header file is + * included. + */ + +/* the basic types may have already been included by mpi_type.h */ +#ifndef MPI_TYPE_H +/***************************************************************************** +* +* Basic Types +* +*****************************************************************************/ + +typedef u8 U8; +typedef __le16 U16; +typedef __le32 U32; +typedef __le64 U64 __attribute__ ((aligned(4))); + +/***************************************************************************** +* +* Pointer Types +* +*****************************************************************************/ + +typedef U8 *PU8; +typedef U16 *PU16; +typedef U32 *PU32; +typedef U64 *PU64; + +#endif + +#endif |