4 files changed, 28 insertions, 28 deletions

diff --git a/drivers/tty/serial/8250/8250_lpss.c b/drivers/tty/serial/8250/8250_lpss.c
index 98dbc7963..448388ec0 100644
--- a/drivers/tty/serial/8250/8250_lpss.c
+++ b/drivers/tty/serial/8250/8250_lpss.c
@@ -246,8 +246,13 @@ static int lpss8250_dma_setup(struct lpss8250 *lpss, struct uart_8250_port *port
 	struct dw_dma_slave *rx_param, *tx_param;
 	struct device *dev = port->port.dev;
 
-	if (!lpss->dma_param.dma_dev)
+	if (!lpss->dma_param.dma_dev) {
+		dma = port->dma;
+		if (dma)
+			goto out_configuration_only;
+
 		return 0;
+	}
 
 	rx_param = devm_kzalloc(dev, sizeof(*rx_param), GFP_KERNEL);
 	if (!rx_param)
@@ -258,16 +263,18 @@ static int lpss8250_dma_setup(struct lpss8250 *lpss, struct uart_8250_port *port
 		return -ENOMEM;
 
 	*rx_param = lpss->dma_param;
-	dma->rxconf.src_maxburst = lpss->dma_maxburst;
-
 	*tx_param = lpss->dma_param;
-	dma->txconf.dst_maxburst = lpss->dma_maxburst;
 
 	dma->fn = lpss8250_dma_filter;
 	dma->rx_param = rx_param;
 	dma->tx_param = tx_param;
 
 	port->dma = dma;
+
+out_configuration_only:
+	dma->rxconf.src_maxburst = lpss->dma_maxburst;
+	dma->txconf.dst_maxburst = lpss->dma_maxburst;
+
 	return 0;
 }
 
diff --git a/drivers/tty/serial/8250/8250_omap.c b/drivers/tty/serial/8250/8250_omap.c
index c1166b45c..b9352d3bb 100644
--- a/drivers/tty/serial/8250/8250_omap.c
+++ b/drivers/tty/serial/8250/8250_omap.c
@@ -162,27 +162,10 @@ static void omap8250_set_mctrl(struct uart_port *port, unsigned int mctrl)
 static void omap_8250_mdr1_errataset(struct uart_8250_port *up,
 				     struct omap8250_priv *priv)
 {
-	u8 timeout = 255;
-
 	serial_out(up, UART_OMAP_MDR1, priv->mdr1);
 	udelay(2);
 	serial_out(up, UART_FCR, up->fcr | UART_FCR_CLEAR_XMIT |
 			UART_FCR_CLEAR_RCVR);
-	/*
-	 * Wait for FIFO to empty: when empty, RX_FIFO_E bit is 0 and
-	 * TX_FIFO_E bit is 1.
-	 */
-	while (UART_LSR_THRE != (serial_in(up, UART_LSR) &
-				(UART_LSR_THRE | UART_LSR_DR))) {
-		timeout--;
-		if (!timeout) {
-			/* Should *never* happen. we warn and carry on */
-			dev_crit(up->port.dev, "Errata i202: timedout %x\n",
-				 serial_in(up, UART_LSR));
-			break;
-		}
-		udelay(1);
-	}
 }
 
 static void omap_8250_get_divisor(struct uart_port *port, unsigned int baud,
@@ -261,6 +244,7 @@ static void omap8250_restore_regs(struct uart_8250_port *up)
 {
 	struct omap8250_priv *priv = up->port.private_data;
 	struct uart_8250_dma	*dma = up->dma;
+	u8 mcr = serial8250_in_MCR(up);
 
 	if (dma && dma->tx_running) {
 		/*
@@ -277,7 +261,7 @@ static void omap8250_restore_regs(struct uart_8250_port *up)
 	serial_out(up, UART_EFR, UART_EFR_ECB);
 
 	serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A);
-	serial8250_out_MCR(up, UART_MCR_TCRTLR);
+	serial8250_out_MCR(up, mcr | UART_MCR_TCRTLR);
 	serial_out(up, UART_FCR, up->fcr);
 
 	omap8250_update_scr(up, priv);
@@ -293,7 +277,8 @@ static void omap8250_restore_regs(struct uart_8250_port *up)
 	serial_out(up, UART_LCR, 0);
 
 	/* drop TCR + TLR access, we setup XON/XOFF later */
-	serial8250_out_MCR(up, up->mcr);
+	serial8250_out_MCR(up, mcr);
+
 	serial_out(up, UART_IER, up->ier);
 
 	serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B);
@@ -602,7 +587,6 @@ static int omap_8250_startup(struct uart_port *port)
 
 	pm_runtime_get_sync(port->dev);
 
-	up->mcr = 0;
 	serial_out(up, UART_FCR, UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT);
 
 	serial_out(up, UART_LCR, UART_LCR_WLEN8);
@@ -1279,6 +1263,7 @@ static int omap8250_remove(struct platform_device *pdev)
 
 	pm_runtime_dont_use_autosuspend(&pdev->dev);
 	pm_runtime_put_sync(&pdev->dev);
+	flush_work(&priv->qos_work);
 	pm_runtime_disable(&pdev->dev);
 	serial8250_unregister_port(priv->line);
 	pm_qos_remove_request(&priv->pm_qos_request);
diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c
index f11d12025..ce266e10a 100644
--- a/drivers/tty/serial/8250/8250_port.c
+++ b/drivers/tty/serial/8250/8250_port.c
@@ -1865,10 +1865,13 @@ EXPORT_SYMBOL_GPL(serial8250_modem_status);
 static bool handle_rx_dma(struct uart_8250_port *up, unsigned int iir)
 {
 	switch (iir & 0x3f) {
-	case UART_IIR_RX_TIMEOUT:
-		serial8250_rx_dma_flush(up);
+	case UART_IIR_RDI:
+		if (!up->dma->rx_running)
+			break;
 		/* fall-through */
 	case UART_IIR_RLSI:
+	case UART_IIR_RX_TIMEOUT:
+		serial8250_rx_dma_flush(up);
 		return true;
 	}
 	return up->dma->rx_dma(up);
@@ -3269,8 +3272,13 @@ static void serial8250_console_restore(struct uart_8250_port *up)
 	unsigned int baud, quot, frac = 0;
 
 	termios.c_cflag = port->cons->cflag;
-	if (port->state->port.tty && termios.c_cflag == 0)
+	termios.c_ispeed = port->cons->ispeed;
+	termios.c_ospeed = port->cons->ospeed;
+	if (port->state->port.tty && termios.c_cflag == 0) {
 		termios.c_cflag = port->state->port.tty->termios.c_cflag;
+		termios.c_ispeed = port->state->port.tty->termios.c_ispeed;
+		termios.c_ospeed = port->state->port.tty->termios.c_ospeed;
+	}
 
 	baud = serial8250_get_baud_rate(port, &termios, NULL);
 	quot = serial8250_get_divisor(port, baud, &frac);
diff --git a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig
index f005eaf8b..a9ddd76d4 100644
--- a/drivers/tty/serial/8250/Kconfig
+++ b/drivers/tty/serial/8250/Kconfig
@@ -106,7 +106,7 @@ config SERIAL_8250_CONSOLE
 
 config SERIAL_8250_GSC
 	tristate
-	depends on SERIAL_8250 && GSC
+	depends on SERIAL_8250 && PARISC
 	default SERIAL_8250
 
 config SERIAL_8250_DMA