diff options
Diffstat (limited to 'drivers/tty/serial')
| -rw-r--r-- | drivers/tty/serial/8250/8250.h | 1 | ||||
| -rw-r--r-- | drivers/tty/serial/8250/8250_dwlib.c | 128 | ||||
| -rw-r--r-- | drivers/tty/serial/8250/8250_dwlib.h | 19 | ||||
| -rw-r--r-- | drivers/tty/serial/8250/8250_early.c | 1 | ||||
| -rw-r--r-- | drivers/tty/serial/8250/8250_pci.c | 141 | ||||
| -rw-r--r-- | drivers/tty/serial/8250/8250_port.c | 17 | ||||
| -rw-r--r-- | drivers/tty/serial/8250/Kconfig | 3 | ||||
| -rw-r--r-- | drivers/tty/serial/8250/Makefile | 1 | ||||
| -rw-r--r-- | drivers/tty/serial/atmel_serial.c | 4 | ||||
| -rw-r--r-- | drivers/tty/serial/cpm_uart/cpm_uart_core.c | 13 | ||||
| -rw-r--r-- | drivers/tty/serial/fsl_lpuart.c | 2 | ||||
| -rw-r--r-- | drivers/tty/serial/meson_uart.c | 44 | ||||
| -rw-r--r-- | drivers/tty/serial/samsung.c | 14 | ||||
| -rw-r--r-- | drivers/tty/serial/sc16is7xx.c | 30 | ||||
| -rw-r--r-- | drivers/tty/serial/serial-tegra.c | 6 |
15 files changed, 368 insertions, 56 deletions
diff --git a/drivers/tty/serial/8250/8250.h b/drivers/tty/serial/8250/8250.h index 8c8aa3b9c..b0c5f0dba 100644 --- a/drivers/tty/serial/8250/8250.h +++ b/drivers/tty/serial/8250/8250.h @@ -85,7 +85,6 @@ struct serial8250_config { #define UART_BUG_TXEN (1 << 1) /* UART has buggy TX IIR status */ #define UART_BUG_NOMSR (1 << 2) /* UART has buggy MSR status bits (Au1x00) */ #define UART_BUG_THRE (1 << 3) /* UART has buggy THRE reassertion */ -#define UART_BUG_PARITY (1 << 4) /* UART mishandles parity if FIFO enabled */ #ifdef CONFIG_SERIAL_8250_SHARE_IRQ diff --git a/drivers/tty/serial/8250/8250_dwlib.c b/drivers/tty/serial/8250/8250_dwlib.c new file mode 100644 index 000000000..1cf229cca --- /dev/null +++ b/drivers/tty/serial/8250/8250_dwlib.c @@ -0,0 +1,128 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* Synopsys DesignWare 8250 library. */ + +#include <linux/bitops.h> +#include <linux/device.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/serial_8250.h> +#include <linux/serial_core.h> + +#include "8250_dwlib.h" + +/* Offsets for the DesignWare specific registers */ +#define DW_UART_DLF 0xc0 /* Divisor Latch Fraction Register */ +#define DW_UART_CPR 0xf4 /* Component Parameter Register */ +#define DW_UART_UCV 0xf8 /* UART Component Version */ + +/* Component Parameter Register bits */ +#define DW_UART_CPR_ABP_DATA_WIDTH (3 << 0) +#define DW_UART_CPR_AFCE_MODE (1 << 4) +#define DW_UART_CPR_THRE_MODE (1 << 5) +#define DW_UART_CPR_SIR_MODE (1 << 6) +#define DW_UART_CPR_SIR_LP_MODE (1 << 7) +#define DW_UART_CPR_ADDITIONAL_FEATURES (1 << 8) +#define DW_UART_CPR_FIFO_ACCESS (1 << 9) +#define DW_UART_CPR_FIFO_STAT (1 << 10) +#define DW_UART_CPR_SHADOW (1 << 11) +#define DW_UART_CPR_ENCODED_PARMS (1 << 12) +#define DW_UART_CPR_DMA_EXTRA (1 << 13) +#define DW_UART_CPR_FIFO_MODE (0xff << 16) + +/* Helper for FIFO size calculation */ +#define DW_UART_CPR_FIFO_SIZE(a) (((a >> 16) & 0xff) * 16) + +static inline u32 dw8250_readl_ext(struct uart_port *p, int offset) +{ + if (p->iotype == UPIO_MEM32BE) + return ioread32be(p->membase + offset); + return readl(p->membase + offset); +} + +static inline void dw8250_writel_ext(struct uart_port *p, int offset, u32 reg) +{ + if (p->iotype == UPIO_MEM32BE) + iowrite32be(reg, p->membase + offset); + else + writel(reg, p->membase + offset); +} + +/* + * divisor = div(I) + div(F) + * "I" means integer, "F" means fractional + * quot = div(I) = clk / (16 * baud) + * frac = div(F) * 2^dlf_size + * + * let rem = clk % (16 * baud) + * we have: div(F) * (16 * baud) = rem + * so frac = 2^dlf_size * rem / (16 * baud) = (rem << dlf_size) / (16 * baud) + */ +static unsigned int dw8250_get_divisor(struct uart_port *p, unsigned int baud, + unsigned int *frac) +{ + unsigned int quot, rem, base_baud = baud * 16; + struct dw8250_port_data *d = p->private_data; + + quot = p->uartclk / base_baud; + rem = p->uartclk % base_baud; + *frac = DIV_ROUND_CLOSEST(rem << d->dlf_size, base_baud); + + return quot; +} + +static void dw8250_set_divisor(struct uart_port *p, unsigned int baud, + unsigned int quot, unsigned int quot_frac) +{ + dw8250_writel_ext(p, DW_UART_DLF, quot_frac); + serial8250_do_set_divisor(p, baud, quot, quot_frac); +} + +void dw8250_setup_port(struct uart_port *p) +{ + struct uart_8250_port *up = up_to_u8250p(p); + u32 reg, old_dlf; + + /* + * If the Component Version Register returns zero, we know that + * ADDITIONAL_FEATURES are not enabled. No need to go any further. + */ + reg = dw8250_readl_ext(p, DW_UART_UCV); + if (!reg) + return; + + dev_dbg(p->dev, "Designware UART version %c.%c%c\n", + (reg >> 24) & 0xff, (reg >> 16) & 0xff, (reg >> 8) & 0xff); + + /* Preserve value written by firmware or bootloader */ + old_dlf = dw8250_readl_ext(p, DW_UART_DLF); + dw8250_writel_ext(p, DW_UART_DLF, ~0U); + reg = dw8250_readl_ext(p, DW_UART_DLF); + dw8250_writel_ext(p, DW_UART_DLF, old_dlf); + + if (reg) { + struct dw8250_port_data *d = p->private_data; + + d->dlf_size = fls(reg); + p->get_divisor = dw8250_get_divisor; + p->set_divisor = dw8250_set_divisor; + } + + reg = dw8250_readl_ext(p, DW_UART_CPR); + if (!reg) + return; + + /* Select the type based on FIFO */ + if (reg & DW_UART_CPR_FIFO_MODE) { + p->type = PORT_16550A; + p->flags |= UPF_FIXED_TYPE; + p->fifosize = DW_UART_CPR_FIFO_SIZE(reg); + up->capabilities = UART_CAP_FIFO; + } + + if (reg & DW_UART_CPR_AFCE_MODE) + up->capabilities |= UART_CAP_AFE; + + if (reg & DW_UART_CPR_SIR_MODE) + up->capabilities |= UART_CAP_IRDA; +} +EXPORT_SYMBOL_GPL(dw8250_setup_port); diff --git a/drivers/tty/serial/8250/8250_dwlib.h b/drivers/tty/serial/8250/8250_dwlib.h new file mode 100644 index 000000000..87a4db2a8 --- /dev/null +++ b/drivers/tty/serial/8250/8250_dwlib.h @@ -0,0 +1,19 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* Synopsys DesignWare 8250 library header file. */ + +#include <linux/types.h> + +#include "8250.h" + +struct dw8250_port_data { + /* Port properties */ + int line; + + /* DMA operations */ + struct uart_8250_dma dma; + + /* Hardware configuration */ + u8 dlf_size; +}; + +void dw8250_setup_port(struct uart_port *p); diff --git a/drivers/tty/serial/8250/8250_early.c b/drivers/tty/serial/8250/8250_early.c index 5cd8c36c8..2acaea5f3 100644 --- a/drivers/tty/serial/8250/8250_early.c +++ b/drivers/tty/serial/8250/8250_early.c @@ -176,6 +176,7 @@ static int __init early_omap8250_setup(struct earlycon_device *device, OF_EARLYCON_DECLARE(omap8250, "ti,omap2-uart", early_omap8250_setup); OF_EARLYCON_DECLARE(omap8250, "ti,omap3-uart", early_omap8250_setup); OF_EARLYCON_DECLARE(omap8250, "ti,omap4-uart", early_omap8250_setup); +OF_EARLYCON_DECLARE(omap8250, "ti,am654-uart", early_omap8250_setup); #endif diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c index 274e644f3..d05b155b4 100644 --- a/drivers/tty/serial/8250/8250_pci.c +++ b/drivers/tty/serial/8250/8250_pci.c @@ -1049,14 +1049,6 @@ static int pci_oxsemi_tornado_init(struct pci_dev *dev) return number_uarts; } -static int pci_asix_setup(struct serial_private *priv, - const struct pciserial_board *board, - struct uart_8250_port *port, int idx) -{ - port->bugs |= UART_BUG_PARITY; - return pci_default_setup(priv, board, port, idx); -} - /* Quatech devices have their own extra interface features */ struct quatech_feature { @@ -1683,7 +1675,6 @@ pci_wch_ch38x_setup(struct serial_private *priv, #define PCI_DEVICE_ID_WCH_CH355_4S 0x7173 #define PCI_VENDOR_ID_AGESTAR 0x5372 #define PCI_DEVICE_ID_AGESTAR_9375 0x6872 -#define PCI_VENDOR_ID_ASIX 0x9710 #define PCI_DEVICE_ID_BROADCOM_TRUMANAGE 0x160a #define PCI_DEVICE_ID_AMCC_ADDIDATA_APCI7800 0x818e @@ -2455,16 +2446,6 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = { .setup = pci_wch_ch38x_setup, }, /* - * ASIX devices with FIFO bug - */ - { - .vendor = PCI_VENDOR_ID_ASIX, - .device = PCI_ANY_ID, - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, - .setup = pci_asix_setup, - }, - /* * Broadcom TruManage (NetXtreme) */ { @@ -4791,6 +4772,12 @@ static const struct pci_device_id serial_pci_tbl[] = { pbn_b1_bt_1_115200 }, /* + * IntaShield IS-100 + */ + { PCI_VENDOR_ID_INTASHIELD, 0x0D60, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_1_115200 }, + /* * IntaShield IS-200 */ { PCI_VENDOR_ID_INTASHIELD, PCI_DEVICE_ID_INTASHIELD_IS200, @@ -4817,10 +4804,14 @@ static const struct pci_device_id serial_pci_tbl[] = { PCI_ANY_ID, PCI_ANY_ID, 0, 0, pbn_b2_1_115200 }, + { PCI_VENDOR_ID_INTASHIELD, 0x0AA2, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, + pbn_b2_1_115200 }, /* - * Brainboxes UC-257 + * Brainboxes UC-253/UC-734 */ - { PCI_VENDOR_ID_INTASHIELD, 0x0861, + { PCI_VENDOR_ID_INTASHIELD, 0x0CA1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, pbn_b2_2_115200 }, @@ -4856,6 +4847,14 @@ static const struct pci_device_id serial_pci_tbl[] = { PCI_ANY_ID, PCI_ANY_ID, 0, 0, pbn_b2_2_115200 }, + { PCI_VENDOR_ID_INTASHIELD, 0x08E2, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, + pbn_b2_2_115200 }, + { PCI_VENDOR_ID_INTASHIELD, 0x08E3, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, + pbn_b2_2_115200 }, /* * Brainboxes UC-310 */ @@ -4866,6 +4865,14 @@ static const struct pci_device_id serial_pci_tbl[] = { /* * Brainboxes UC-313 */ + { PCI_VENDOR_ID_INTASHIELD, 0x08A1, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, + pbn_b2_2_115200 }, + { PCI_VENDOR_ID_INTASHIELD, 0x08A2, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, + pbn_b2_2_115200 }, { PCI_VENDOR_ID_INTASHIELD, 0x08A3, PCI_ANY_ID, PCI_ANY_ID, 0, 0, @@ -4880,6 +4887,10 @@ static const struct pci_device_id serial_pci_tbl[] = { /* * Brainboxes UC-346 */ + { PCI_VENDOR_ID_INTASHIELD, 0x0B01, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, + pbn_b2_4_115200 }, { PCI_VENDOR_ID_INTASHIELD, 0x0B02, PCI_ANY_ID, PCI_ANY_ID, 0, 0, @@ -4891,6 +4902,10 @@ static const struct pci_device_id serial_pci_tbl[] = { PCI_ANY_ID, PCI_ANY_ID, 0, 0, pbn_b2_2_115200 }, + { PCI_VENDOR_ID_INTASHIELD, 0x0A82, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, + pbn_b2_2_115200 }, { PCI_VENDOR_ID_INTASHIELD, 0x0A83, PCI_ANY_ID, PCI_ANY_ID, 0, 0, @@ -4903,13 +4918,95 @@ static const struct pci_device_id serial_pci_tbl[] = { 0, 0, pbn_b2_4_115200 }, /* - * Brainboxes UC-420/431 + * Brainboxes UC-420 */ { PCI_VENDOR_ID_INTASHIELD, 0x0921, PCI_ANY_ID, PCI_ANY_ID, 0, 0, pbn_b2_4_115200 }, /* + * Brainboxes UC-607 + */ + { PCI_VENDOR_ID_INTASHIELD, 0x09A1, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, + pbn_b2_2_115200 }, + { PCI_VENDOR_ID_INTASHIELD, 0x09A2, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, + pbn_b2_2_115200 }, + { PCI_VENDOR_ID_INTASHIELD, 0x09A3, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, + pbn_b2_2_115200 }, + /* + * Brainboxes UC-836 + */ + { PCI_VENDOR_ID_INTASHIELD, 0x0D41, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, + pbn_b2_4_115200 }, + /* + * Brainboxes UP-189 + */ + { PCI_VENDOR_ID_INTASHIELD, 0x0AC1, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, + pbn_b2_2_115200 }, + { PCI_VENDOR_ID_INTASHIELD, 0x0AC2, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, + pbn_b2_2_115200 }, + { PCI_VENDOR_ID_INTASHIELD, 0x0AC3, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, + pbn_b2_2_115200 }, + /* + * Brainboxes UP-200 + */ + { PCI_VENDOR_ID_INTASHIELD, 0x0B21, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, + pbn_b2_2_115200 }, + { PCI_VENDOR_ID_INTASHIELD, 0x0B22, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, + pbn_b2_2_115200 }, + { PCI_VENDOR_ID_INTASHIELD, 0x0B23, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, + pbn_b2_2_115200 }, + /* + * Brainboxes UP-869 + */ + { PCI_VENDOR_ID_INTASHIELD, 0x0C01, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, + pbn_b2_2_115200 }, + { PCI_VENDOR_ID_INTASHIELD, 0x0C02, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, + pbn_b2_2_115200 }, + { PCI_VENDOR_ID_INTASHIELD, 0x0C03, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, + pbn_b2_2_115200 }, + /* + * Brainboxes UP-880 + */ + { PCI_VENDOR_ID_INTASHIELD, 0x0C21, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, + pbn_b2_2_115200 }, + { PCI_VENDOR_ID_INTASHIELD, 0x0C22, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, + pbn_b2_2_115200 }, + { PCI_VENDOR_ID_INTASHIELD, 0x0C23, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, + pbn_b2_2_115200 }, + /* * Perle PCI-RAS cards */ { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9030, diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c index cba4888bc..7f5d51de6 100644 --- a/drivers/tty/serial/8250/8250_port.c +++ b/drivers/tty/serial/8250/8250_port.c @@ -1910,7 +1910,10 @@ int serial8250_handle_irq(struct uart_port *port, unsigned int iir) skip_rx = true; if (status & (UART_LSR_DR | UART_LSR_BI) && !skip_rx) { - if (irqd_is_wakeup_set(irq_get_irq_data(port->irq))) + struct irq_data *d; + + d = irq_get_irq_data(port->irq); + if (d && irqd_is_wakeup_set(d)) pm_wakeup_event(tport->tty->dev, 0); if (!up->dma || handle_rx_dma(up, iir)) status = serial8250_rx_chars(up, status); @@ -2617,11 +2620,8 @@ static unsigned char serial8250_compute_lcr(struct uart_8250_port *up, if (c_cflag & CSTOPB) cval |= UART_LCR_STOP; - if (c_cflag & PARENB) { + if (c_cflag & PARENB) cval |= UART_LCR_PARITY; - if (up->bugs & UART_BUG_PARITY) - up->fifo_bug = true; - } if (!(c_cflag & PARODD)) cval |= UART_LCR_EPAR; #ifdef CMSPAR @@ -2735,8 +2735,7 @@ serial8250_do_set_termios(struct uart_port *port, struct ktermios *termios, up->lcr = cval; /* Save computed LCR */ if (up->capabilities & UART_CAP_FIFO && port->fifosize > 1) { - /* NOTE: If fifo_bug is not set, a user can set RX_trigger. */ - if ((baud < 2400 && !up->dma) || up->fifo_bug) { + if (baud < 2400 && !up->dma) { up->fcr &= ~UART_FCR_TRIGGER_MASK; up->fcr |= UART_FCR_TRIGGER_1; } @@ -3072,8 +3071,7 @@ static int do_set_rxtrig(struct tty_port *port, unsigned char bytes) struct uart_8250_port *up = up_to_u8250p(uport); int rxtrig; - if (!(up->capabilities & UART_CAP_FIFO) || uport->fifosize <= 1 || - up->fifo_bug) + if (!(up->capabilities & UART_CAP_FIFO) || uport->fifosize <= 1) return -EINVAL; rxtrig = bytes_to_fcr_rxtrig(up, bytes); @@ -3229,6 +3227,7 @@ void serial8250_init_port(struct uart_8250_port *up) struct uart_port *port = &up->port; spin_lock_init(&port->lock); + port->pm = NULL; port->ops = &serial8250_pops; up->cur_iotype = 0xFF; diff --git a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig index a9ddd76d4..733ac3209 100644 --- a/drivers/tty/serial/8250/Kconfig +++ b/drivers/tty/serial/8250/Kconfig @@ -312,6 +312,9 @@ config SERIAL_8250_RSA If you don't have such card, or if unsure, say N. +config SERIAL_8250_DWLIB + bool + config SERIAL_8250_ACORN tristate "Acorn expansion card serial port support" depends on ARCH_ACORN && SERIAL_8250 diff --git a/drivers/tty/serial/8250/Makefile b/drivers/tty/serial/8250/Makefile index 18751bc63..9b451d815 100644 --- a/drivers/tty/serial/8250/Makefile +++ b/drivers/tty/serial/8250/Makefile @@ -8,6 +8,7 @@ obj-$(CONFIG_SERIAL_8250) += 8250.o 8250_base.o 8250-$(CONFIG_SERIAL_8250_PNP) += 8250_pnp.o 8250_base-y := 8250_port.o 8250_base-$(CONFIG_SERIAL_8250_DMA) += 8250_dma.o +8250_base-$(CONFIG_SERIAL_8250_DWLIB) += 8250_dwlib.o 8250_base-$(CONFIG_SERIAL_8250_FINTEK) += 8250_fintek.o obj-$(CONFIG_SERIAL_8250_GSC) += 8250_gsc.o obj-$(CONFIG_SERIAL_8250_PCI) += 8250_pci.o diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c index 50c4058a0..1688c190f 100644 --- a/drivers/tty/serial/atmel_serial.c +++ b/drivers/tty/serial/atmel_serial.c @@ -791,11 +791,11 @@ static void atmel_complete_tx_dma(void *arg) port->icount.tx += atmel_port->tx_len; - spin_lock_irq(&atmel_port->lock_tx); + spin_lock(&atmel_port->lock_tx); async_tx_ack(atmel_port->desc_tx); atmel_port->cookie_tx = -EINVAL; atmel_port->desc_tx = NULL; - spin_unlock_irq(&atmel_port->lock_tx); + spin_unlock(&atmel_port->lock_tx); if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) uart_write_wakeup(port); diff --git a/drivers/tty/serial/cpm_uart/cpm_uart_core.c b/drivers/tty/serial/cpm_uart/cpm_uart_core.c index ad40c75bb..375d4790e 100644 --- a/drivers/tty/serial/cpm_uart/cpm_uart_core.c +++ b/drivers/tty/serial/cpm_uart/cpm_uart_core.c @@ -1269,19 +1269,14 @@ static void cpm_uart_console_write(struct console *co, const char *s, { struct uart_cpm_port *pinfo = &cpm_uart_ports[co->index]; unsigned long flags; - int nolock = oops_in_progress; - if (unlikely(nolock)) { + if (unlikely(oops_in_progress)) { local_irq_save(flags); - } else { - spin_lock_irqsave(&pinfo->port.lock, flags); - } - - cpm_uart_early_write(pinfo, s, count, true); - - if (unlikely(nolock)) { + cpm_uart_early_write(pinfo, s, count, true); local_irq_restore(flags); } else { + spin_lock_irqsave(&pinfo->port.lock, flags); + cpm_uart_early_write(pinfo, s, count, true); spin_unlock_irqrestore(&pinfo->port.lock, flags); } } diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c index 36321d810..af23d41b9 100644 --- a/drivers/tty/serial/fsl_lpuart.c +++ b/drivers/tty/serial/fsl_lpuart.c @@ -2136,6 +2136,8 @@ static int __init lpuart32_imx_early_console_setup(struct earlycon_device *devic OF_EARLYCON_DECLARE(lpuart, "fsl,vf610-lpuart", lpuart_early_console_setup); OF_EARLYCON_DECLARE(lpuart32, "fsl,ls1021a-lpuart", lpuart32_early_console_setup); OF_EARLYCON_DECLARE(lpuart32, "fsl,imx7ulp-lpuart", lpuart32_imx_early_console_setup); +OF_EARLYCON_DECLARE(lpuart32, "fsl,imx8ulp-lpuart", lpuart32_imx_early_console_setup); +OF_EARLYCON_DECLARE(lpuart32, "fsl,imx8qxp-lpuart", lpuart32_imx_early_console_setup); EARLYCON_DECLARE(lpuart, lpuart_early_console_setup); EARLYCON_DECLARE(lpuart32, lpuart32_early_console_setup); diff --git a/drivers/tty/serial/meson_uart.c b/drivers/tty/serial/meson_uart.c index 1838d0be3..adb0bbcec 100644 --- a/drivers/tty/serial/meson_uart.c +++ b/drivers/tty/serial/meson_uart.c @@ -72,7 +72,8 @@ #define AML_UART_BAUD_USE BIT(23) #define AML_UART_BAUD_XTAL BIT(24) -#define AML_UART_PORT_NUM 6 +#define AML_UART_PORT_NUM 12 +#define AML_UART_PORT_OFFSET 6 #define AML_UART_DEV_NAME "ttyAML" @@ -370,10 +371,14 @@ static void meson_uart_set_termios(struct uart_port *port, else val |= AML_UART_STOP_BIT_1SB; - if (cflags & CRTSCTS) - val &= ~AML_UART_TWO_WIRE_EN; - else + if (cflags & CRTSCTS) { + if (port->flags & UPF_HARD_FLOW) + val &= ~AML_UART_TWO_WIRE_EN; + else + termios->c_cflag &= ~CRTSCTS; + } else { val |= AML_UART_TWO_WIRE_EN; + } writel(val, port->membase + AML_UART_CONTROL); @@ -664,13 +669,27 @@ static int meson_uart_probe_clocks(struct platform_device *pdev, static int meson_uart_probe(struct platform_device *pdev) { - struct resource *res_mem, *res_irq; + struct resource *res_mem; struct uart_port *port; + u32 fifosize = 64; /* Default is 64, 128 for EE UART_0 */ int ret = 0; + int irq; + bool has_rtscts; if (pdev->dev.of_node) pdev->id = of_alias_get_id(pdev->dev.of_node, "serial"); + if (pdev->id < 0) { + int id; + + for (id = AML_UART_PORT_OFFSET; id < AML_UART_PORT_NUM; id++) { + if (!meson_ports[id]) { + pdev->id = id; + break; + } + } + } + if (pdev->id < 0 || pdev->id >= AML_UART_PORT_NUM) return -EINVAL; @@ -678,9 +697,12 @@ static int meson_uart_probe(struct platform_device *pdev) if (!res_mem) return -ENODEV; - res_irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0); - if (!res_irq) - return -ENODEV; + irq = platform_get_irq(pdev, 0); + if (irq < 0) + return irq; + + of_property_read_u32(pdev->dev.of_node, "fifo-size", &fifosize); + has_rtscts = of_property_read_bool(pdev->dev.of_node, "uart-has-rtscts"); if (meson_ports[pdev->id]) { dev_err(&pdev->dev, "port %d already allocated\n", pdev->id); @@ -703,14 +725,16 @@ static int meson_uart_probe(struct platform_device *pdev) port->iotype = UPIO_MEM; port->mapbase = res_mem->start; port->mapsize = resource_size(res_mem); - port->irq = res_irq->start; + port->irq = irq; port->flags = UPF_BOOT_AUTOCONF | UPF_LOW_LATENCY; + if (has_rtscts) + port->flags |= UPF_HARD_FLOW; port->dev = &pdev->dev; port->line = pdev->id; port->type = PORT_MESON; port->x_char = 0; port->ops = &meson_uart_ops; - port->fifosize = 64; + port->fifosize = fifosize; meson_ports[pdev->id] = port; platform_set_drvdata(pdev, port); diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c index 964d6d33b..5f1f52cc6 100644 --- a/drivers/tty/serial/samsung.c +++ b/drivers/tty/serial/samsung.c @@ -1199,8 +1199,12 @@ static unsigned int s3c24xx_serial_getclk(struct s3c24xx_uart_port *ourport, continue; rate = clk_get_rate(clk); - if (!rate) + if (!rate) { + dev_err(ourport->port.dev, + "Failed to get clock rate for %s.\n", clkname); + clk_put(clk); continue; + } if (ourport->info->has_divslot) { unsigned long div = rate / req_baud; @@ -1226,10 +1230,18 @@ static unsigned int s3c24xx_serial_getclk(struct s3c24xx_uart_port *ourport, calc_deviation = -calc_deviation; if (calc_deviation < deviation) { + /* + * If we find a better clk, release the previous one, if + * any. + */ + if (!IS_ERR(*best_clk)) + clk_put(*best_clk); *best_clk = clk; best_quot = quot; *clk_num = cnt; deviation = calc_deviation; + } else { + clk_put(clk); } } diff --git a/drivers/tty/serial/sc16is7xx.c b/drivers/tty/serial/sc16is7xx.c index ebea4a9d8..c65f9194a 100644 --- a/drivers/tty/serial/sc16is7xx.c +++ b/drivers/tty/serial/sc16is7xx.c @@ -694,6 +694,18 @@ static bool sc16is7xx_port_irq(struct sc16is7xx_port *s, int portno) case SC16IS7XX_IIR_RTOI_SRC: case SC16IS7XX_IIR_XOFFI_SRC: rxlen = sc16is7xx_port_read(port, SC16IS7XX_RXLVL_REG); + + /* + * There is a silicon bug that makes the chip report a + * time-out interrupt but no data in the FIFO. This is + * described in errata section 18.1.4. + * + * When this happens, read one byte from the FIFO to + * clear the interrupt. + */ + if (iir == SC16IS7XX_IIR_RTOI_SRC && !rxlen) + rxlen = 1; + if (rxlen) sc16is7xx_handle_rx(port, rxlen, iir); break; @@ -1166,9 +1178,18 @@ static int sc16is7xx_gpio_direction_output(struct gpio_chip *chip, state |= BIT(offset); else state &= ~BIT(offset); - sc16is7xx_port_write(port, SC16IS7XX_IOSTATE_REG, state); + + /* + * If we write IOSTATE first, and then IODIR, the output value is not + * transferred to the corresponding I/O pin. + * The datasheet states that each register bit will be transferred to + * the corresponding I/O pin programmed as output when writing to + * IOSTATE. Therefore, configure direction first with IODIR, and then + * set value after with IOSTATE. + */ sc16is7xx_port_update(port, SC16IS7XX_IODIR_REG, BIT(offset), BIT(offset)); + sc16is7xx_port_write(port, SC16IS7XX_IOSTATE_REG, state); return 0; } @@ -1255,6 +1276,13 @@ static int sc16is7xx_probe(struct device *dev, s->p[i].port.type = PORT_SC16IS7XX; s->p[i].port.fifosize = SC16IS7XX_FIFO_SIZE; s->p[i].port.flags = UPF_FIXED_TYPE | UPF_LOW_LATENCY; + s->p[i].port.iobase = i; + /* + * Use all ones as membase to make sure uart_configure_port() in + * serial_core.c does not abort for SPI/I2C devices where the + * membase address is not applicable. + */ + s->p[i].port.membase = (void __iomem *)~0; s->p[i].port.iotype = UPIO_PORT; s->p[i].port.uartclk = freq; s->p[i].port.rs485_config = sc16is7xx_config_rs485; diff --git a/drivers/tty/serial/serial-tegra.c b/drivers/tty/serial/serial-tegra.c index 41fe45f23..a30f7ed12 100644 --- a/drivers/tty/serial/serial-tegra.c +++ b/drivers/tty/serial/serial-tegra.c @@ -944,7 +944,11 @@ static int tegra_uart_hw_init(struct tegra_uart_port *tup) tup->ier_shadow = 0; tup->current_baud = 0; - clk_prepare_enable(tup->uart_clk); + ret = clk_prepare_enable(tup->uart_clk); + if (ret) { + dev_err(tup->uport.dev, "could not enable clk\n"); + return ret; + } /* Reset the UART controller to clear all previous status.*/ reset_control_assert(tup->rst); |