diff options
Diffstat (limited to 'drivers/usb/dwc3')
| -rw-r--r-- | drivers/usb/dwc3/core.c | 57 | ||||
| -rw-r--r-- | drivers/usb/dwc3/core.h | 3 | ||||
| -rw-r--r-- | drivers/usb/dwc3/dwc3-pci.c | 6 | ||||
| -rw-r--r-- | drivers/usb/dwc3/dwc3-qcom.c | 77 | ||||
| -rw-r--r-- | drivers/usb/dwc3/gadget.c | 9 |
5 files changed, 92 insertions, 60 deletions
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index 81a5ca15b..c6de1dcf2 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -242,11 +242,48 @@ static int dwc3_core_soft_reset(struct dwc3 *dwc) /* * We're resetting only the device side because, if we're in host mode, * XHCI driver will reset the host block. If dwc3 was configured for - * host-only mode, then we can return early. + * host-only mode or current role is host, then we can return early. */ if (dwc->current_dr_role == DWC3_GCTL_PRTCAP_HOST) return 0; + /* + * If the dr_mode is host and the dwc->current_dr_role is not the + * corresponding DWC3_GCTL_PRTCAP_HOST, then the dwc3_core_init_mode + * isn't executed yet. Ensure the phy is ready before the controller + * updates the GCTL.PRTCAPDIR or other settings by soft-resetting + * the phy. + * + * Note: GUSB3PIPECTL[n] and GUSB2PHYCFG[n] are port settings where n + * is port index. If this is a multiport host, then we need to reset + * all active ports. + */ + if (dwc->dr_mode == USB_DR_MODE_HOST) { + u32 usb3_port; + u32 usb2_port; + + usb3_port = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(0)); + usb3_port |= DWC3_GUSB3PIPECTL_PHYSOFTRST; + dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(0), usb3_port); + + usb2_port = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0)); + usb2_port |= DWC3_GUSB2PHYCFG_PHYSOFTRST; + dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), usb2_port); + + /* Small delay for phy reset assertion */ + usleep_range(1000, 2000); + + usb3_port &= ~DWC3_GUSB3PIPECTL_PHYSOFTRST; + dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(0), usb3_port); + + usb2_port &= ~DWC3_GUSB2PHYCFG_PHYSOFTRST; + dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), usb2_port); + + /* Wait for clock synchronization */ + msleep(50); + return 0; + } + reg = dwc3_readl(dwc->regs, DWC3_DCTL); reg |= DWC3_DCTL_CSFTRST; dwc3_writel(dwc->regs, DWC3_DCTL, reg); @@ -993,22 +1030,6 @@ static int dwc3_core_init(struct dwc3 *dwc) dwc3_writel(dwc->regs, DWC3_GUCTL1, reg); } - if (dwc->dr_mode == USB_DR_MODE_HOST || - dwc->dr_mode == USB_DR_MODE_OTG) { - reg = dwc3_readl(dwc->regs, DWC3_GUCTL); - - /* - * Enable Auto retry Feature to make the controller operating in - * Host mode on seeing transaction errors(CRC errors or internal - * overrun scenerios) on IN transfers to reply to the device - * with a non-terminating retry ACK (i.e, an ACK transcation - * packet with Retry=1 & Nump != 0) - */ - reg |= DWC3_GUCTL_HSTINAUTORETRY; - - dwc3_writel(dwc->regs, DWC3_GUCTL, reg); - } - /* * Must config both number of packets and max burst settings to enable * RX and/or TX threshold. @@ -1509,6 +1530,8 @@ static int dwc3_probe(struct platform_device *pdev) pm_runtime_put(dev); + dma_set_max_seg_size(dev, UINT_MAX); + return 0; err5: diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h index 55ee41283..a1d65e36a 100644 --- a/drivers/usb/dwc3/core.h +++ b/drivers/usb/dwc3/core.h @@ -238,9 +238,6 @@ #define DWC3_GCTL_GBLHIBERNATIONEN BIT(1) #define DWC3_GCTL_DSBLCLKGTNG BIT(0) -/* Global User Control Register */ -#define DWC3_GUCTL_HSTINAUTORETRY BIT(14) - /* Global User Control 1 Register */ #define DWC3_GUCTL1_PARKMODE_DISABLE_SS BIT(17) #define DWC3_GUCTL1_TX_IPGAP_LINECHECK_DIS BIT(28) diff --git a/drivers/usb/dwc3/dwc3-pci.c b/drivers/usb/dwc3/dwc3-pci.c index 955bf820f..8d4f1b13f 100644 --- a/drivers/usb/dwc3/dwc3-pci.c +++ b/drivers/usb/dwc3/dwc3-pci.c @@ -171,10 +171,12 @@ static int dwc3_pci_quirks(struct dwc3_pci *dwc) /* * A lot of BYT devices lack ACPI resource entries for - * the GPIOs, add a fallback mapping to the reference + * the GPIOs. If the ACPI entry for the GPIO controller + * is present add a fallback mapping to the reference * design GPIOs which all boards seem to use. */ - gpiod_add_lookup_table(&platform_bytcr_gpios); + if (acpi_dev_present("INT33FC", NULL, -1)) + gpiod_add_lookup_table(&platform_bytcr_gpios); /* * These GPIOs will turn on the USB2 PHY. Note that we have to diff --git a/drivers/usb/dwc3/dwc3-qcom.c b/drivers/usb/dwc3/dwc3-qcom.c index 58e1bc3a7..3fc06ca8c 100644 --- a/drivers/usb/dwc3/dwc3-qcom.c +++ b/drivers/usb/dwc3/dwc3-qcom.c @@ -176,55 +176,58 @@ static int dwc3_qcom_register_extcon(struct dwc3_qcom *qcom) /* Only usable in contexts where the role can not change. */ static bool dwc3_qcom_is_host(struct dwc3_qcom *qcom) { - struct dwc3 *dwc = platform_get_drvdata(qcom->dwc3); + struct dwc3 *dwc; + + /* + * FIXME: Fix this layering violation. + */ + dwc = platform_get_drvdata(qcom->dwc3); + + /* Core driver may not have probed yet. */ + if (!dwc) + return false; return dwc->xhci; } +static void dwc3_qcom_enable_wakeup_irq(int irq) +{ + if (!irq) + return; + + enable_irq(irq); + enable_irq_wake(irq); +} + +static void dwc3_qcom_disable_wakeup_irq(int irq) +{ + if (!irq) + return; + + disable_irq_wake(irq); + disable_irq_nosync(irq); +} + static void dwc3_qcom_disable_interrupts(struct dwc3_qcom *qcom) { - if (qcom->hs_phy_irq) { - disable_irq_wake(qcom->hs_phy_irq); - disable_irq_nosync(qcom->hs_phy_irq); - } + dwc3_qcom_disable_wakeup_irq(qcom->hs_phy_irq); - if (qcom->dp_hs_phy_irq) { - disable_irq_wake(qcom->dp_hs_phy_irq); - disable_irq_nosync(qcom->dp_hs_phy_irq); - } + dwc3_qcom_disable_wakeup_irq(qcom->dp_hs_phy_irq); - if (qcom->dm_hs_phy_irq) { - disable_irq_wake(qcom->dm_hs_phy_irq); - disable_irq_nosync(qcom->dm_hs_phy_irq); - } + dwc3_qcom_disable_wakeup_irq(qcom->dm_hs_phy_irq); - if (qcom->ss_phy_irq) { - disable_irq_wake(qcom->ss_phy_irq); - disable_irq_nosync(qcom->ss_phy_irq); - } + dwc3_qcom_disable_wakeup_irq(qcom->ss_phy_irq); } static void dwc3_qcom_enable_interrupts(struct dwc3_qcom *qcom) { - if (qcom->hs_phy_irq) { - enable_irq(qcom->hs_phy_irq); - enable_irq_wake(qcom->hs_phy_irq); - } + dwc3_qcom_enable_wakeup_irq(qcom->hs_phy_irq); - if (qcom->dp_hs_phy_irq) { - enable_irq(qcom->dp_hs_phy_irq); - enable_irq_wake(qcom->dp_hs_phy_irq); - } + dwc3_qcom_enable_wakeup_irq(qcom->dp_hs_phy_irq); - if (qcom->dm_hs_phy_irq) { - enable_irq(qcom->dm_hs_phy_irq); - enable_irq_wake(qcom->dm_hs_phy_irq); - } + dwc3_qcom_enable_wakeup_irq(qcom->dm_hs_phy_irq); - if (qcom->ss_phy_irq) { - enable_irq(qcom->ss_phy_irq); - enable_irq_wake(qcom->ss_phy_irq); - } + dwc3_qcom_enable_wakeup_irq(qcom->ss_phy_irq); } static int dwc3_qcom_suspend(struct dwc3_qcom *qcom) @@ -326,7 +329,7 @@ static int dwc3_qcom_setup_irq(struct platform_device *pdev) irq_set_status_flags(irq, IRQ_NOAUTOEN); ret = devm_request_threaded_irq(qcom->dev, irq, NULL, qcom_dwc3_resume_irq, - IRQF_TRIGGER_HIGH | IRQF_ONESHOT, + IRQF_ONESHOT, "qcom_dwc3 HS", qcom); if (ret) { dev_err(qcom->dev, "hs_phy_irq failed: %d\n", ret); @@ -340,7 +343,7 @@ static int dwc3_qcom_setup_irq(struct platform_device *pdev) irq_set_status_flags(irq, IRQ_NOAUTOEN); ret = devm_request_threaded_irq(qcom->dev, irq, NULL, qcom_dwc3_resume_irq, - IRQF_TRIGGER_HIGH | IRQF_ONESHOT, + IRQF_ONESHOT, "qcom_dwc3 DP_HS", qcom); if (ret) { dev_err(qcom->dev, "dp_hs_phy_irq failed: %d\n", ret); @@ -354,7 +357,7 @@ static int dwc3_qcom_setup_irq(struct platform_device *pdev) irq_set_status_flags(irq, IRQ_NOAUTOEN); ret = devm_request_threaded_irq(qcom->dev, irq, NULL, qcom_dwc3_resume_irq, - IRQF_TRIGGER_HIGH | IRQF_ONESHOT, + IRQF_ONESHOT, "qcom_dwc3 DM_HS", qcom); if (ret) { dev_err(qcom->dev, "dm_hs_phy_irq failed: %d\n", ret); @@ -368,7 +371,7 @@ static int dwc3_qcom_setup_irq(struct platform_device *pdev) irq_set_status_flags(irq, IRQ_NOAUTOEN); ret = devm_request_threaded_irq(qcom->dev, irq, NULL, qcom_dwc3_resume_irq, - IRQF_TRIGGER_HIGH | IRQF_ONESHOT, + IRQF_ONESHOT, "qcom_dwc3 SS", qcom); if (ret) { dev_err(qcom->dev, "ss_phy_irq failed: %d\n", ret); diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index 4528852fd..e617a28ac 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -3234,9 +3234,14 @@ static irqreturn_t dwc3_check_event_buf(struct dwc3_event_buffer *evt) u32 reg; if (pm_runtime_suspended(dwc->dev)) { + dwc->pending_events = true; + /* + * Trigger runtime resume. The get() function will be balanced + * after processing the pending events in dwc3_process_pending + * events(). + */ pm_runtime_get(dwc->dev); disable_irq_nosync(dwc->irq_gadget); - dwc->pending_events = true; return IRQ_HANDLED; } @@ -3474,6 +3479,8 @@ void dwc3_gadget_process_pending_events(struct dwc3 *dwc) { if (dwc->pending_events) { dwc3_interrupt(dwc->irq_gadget, dwc->ev_buf); + dwc3_thread_interrupt(dwc->irq_gadget, dwc->ev_buf); + pm_runtime_put(dwc->dev); dwc->pending_events = false; enable_irq(dwc->irq_gadget); } |