diff options
Diffstat (limited to 'drivers/video/fbdev/atmel_lcdfb.c')
| -rw-r--r-- | drivers/video/fbdev/atmel_lcdfb.c | 1449 |
1 files changed, 1449 insertions, 0 deletions
diff --git a/drivers/video/fbdev/atmel_lcdfb.c b/drivers/video/fbdev/atmel_lcdfb.c new file mode 100644 index 000000000..6d01ae398 --- /dev/null +++ b/drivers/video/fbdev/atmel_lcdfb.c @@ -0,0 +1,1449 @@ +/* + * Driver for AT91/AT32 LCD Controller + * + * Copyright (C) 2007 Atmel Corporation + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file COPYING in the main directory of this archive for + * more details. + */ + +#include <linux/kernel.h> +#include <linux/platform_device.h> +#include <linux/dma-mapping.h> +#include <linux/interrupt.h> +#include <linux/clk.h> +#include <linux/fb.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/backlight.h> +#include <linux/gfp.h> +#include <linux/gpio/consumer.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <video/of_videomode.h> +#include <video/of_display_timing.h> +#include <linux/regulator/consumer.h> +#include <video/videomode.h> + +#include <video/atmel_lcdc.h> + +struct atmel_lcdfb_config { + bool have_alt_pixclock; + bool have_hozval; + bool have_intensity_bit; +}; + + /* LCD Controller info data structure, stored in device platform_data */ +struct atmel_lcdfb_info { + spinlock_t lock; + struct fb_info *info; + void __iomem *mmio; + int irq_base; + struct work_struct task; + + unsigned int smem_len; + struct platform_device *pdev; + struct clk *bus_clk; + struct clk *lcdc_clk; + + struct backlight_device *backlight; + u8 bl_power; + u8 saved_lcdcon; + + u32 pseudo_palette[16]; + bool have_intensity_bit; + + struct atmel_lcdfb_pdata pdata; + + struct atmel_lcdfb_config *config; + struct regulator *reg_lcd; +}; + +struct atmel_lcdfb_power_ctrl_gpio { + struct gpio_desc *gpiod; + + struct list_head list; +}; + +#define lcdc_readl(sinfo, reg) __raw_readl((sinfo)->mmio+(reg)) +#define lcdc_writel(sinfo, reg, val) __raw_writel((val), (sinfo)->mmio+(reg)) + +/* configurable parameters */ +#define ATMEL_LCDC_CVAL_DEFAULT 0xc8 +#define ATMEL_LCDC_DMA_BURST_LEN 8 /* words */ +#define ATMEL_LCDC_FIFO_SIZE 512 /* words */ + +static struct atmel_lcdfb_config at91sam9261_config = { + .have_hozval = true, + .have_intensity_bit = true, +}; + +static struct atmel_lcdfb_config at91sam9263_config = { + .have_intensity_bit = true, +}; + +static struct atmel_lcdfb_config at91sam9g10_config = { + .have_hozval = true, +}; + +static struct atmel_lcdfb_config at91sam9g45_config = { + .have_alt_pixclock = true, +}; + +static struct atmel_lcdfb_config at91sam9g45es_config = { +}; + +static struct atmel_lcdfb_config at91sam9rl_config = { + .have_intensity_bit = true, +}; + +static struct atmel_lcdfb_config at32ap_config = { + .have_hozval = true, +}; + +static const struct platform_device_id atmel_lcdfb_devtypes[] = { + { + .name = "at91sam9261-lcdfb", + .driver_data = (unsigned long)&at91sam9261_config, + }, { + .name = "at91sam9263-lcdfb", + .driver_data = (unsigned long)&at91sam9263_config, + }, { + .name = "at91sam9g10-lcdfb", + .driver_data = (unsigned long)&at91sam9g10_config, + }, { + .name = "at91sam9g45-lcdfb", + .driver_data = (unsigned long)&at91sam9g45_config, + }, { + .name = "at91sam9g45es-lcdfb", + .driver_data = (unsigned long)&at91sam9g45es_config, + }, { + .name = "at91sam9rl-lcdfb", + .driver_data = (unsigned long)&at91sam9rl_config, + }, { + .name = "at32ap-lcdfb", + .driver_data = (unsigned long)&at32ap_config, + }, { + /* terminator */ + } +}; +MODULE_DEVICE_TABLE(platform, atmel_lcdfb_devtypes); + +static struct atmel_lcdfb_config * +atmel_lcdfb_get_config(struct platform_device *pdev) +{ + unsigned long data; + + data = platform_get_device_id(pdev)->driver_data; + + return (struct atmel_lcdfb_config *)data; +} + +#if defined(CONFIG_ARCH_AT91) +#define ATMEL_LCDFB_FBINFO_DEFAULT (FBINFO_DEFAULT \ + | FBINFO_PARTIAL_PAN_OK \ + | FBINFO_HWACCEL_YPAN) + +static inline void atmel_lcdfb_update_dma2d(struct atmel_lcdfb_info *sinfo, + struct fb_var_screeninfo *var, + struct fb_info *info) +{ + +} +#elif defined(CONFIG_AVR32) +#define ATMEL_LCDFB_FBINFO_DEFAULT (FBINFO_DEFAULT \ + | FBINFO_PARTIAL_PAN_OK \ + | FBINFO_HWACCEL_XPAN \ + | FBINFO_HWACCEL_YPAN) + +static void atmel_lcdfb_update_dma2d(struct atmel_lcdfb_info *sinfo, + struct fb_var_screeninfo *var, + struct fb_info *info) +{ + u32 dma2dcfg; + u32 pixeloff; + + pixeloff = (var->xoffset * info->var.bits_per_pixel) & 0x1f; + + dma2dcfg = (info->var.xres_virtual - info->var.xres) + * info->var.bits_per_pixel / 8; + dma2dcfg |= pixeloff << ATMEL_LCDC_PIXELOFF_OFFSET; + lcdc_writel(sinfo, ATMEL_LCDC_DMA2DCFG, dma2dcfg); + + /* Update configuration */ + lcdc_writel(sinfo, ATMEL_LCDC_DMACON, + lcdc_readl(sinfo, ATMEL_LCDC_DMACON) + | ATMEL_LCDC_DMAUPDT); +} +#endif + +static u32 contrast_ctr = ATMEL_LCDC_PS_DIV8 + | ATMEL_LCDC_POL_POSITIVE + | ATMEL_LCDC_ENA_PWMENABLE; + +#ifdef CONFIG_BACKLIGHT_ATMEL_LCDC + +/* some bl->props field just changed */ +static int atmel_bl_update_status(struct backlight_device *bl) +{ + struct atmel_lcdfb_info *sinfo = bl_get_data(bl); + int power = sinfo->bl_power; + int brightness = bl->props.brightness; + + /* REVISIT there may be a meaningful difference between + * fb_blank and power ... there seem to be some cases + * this doesn't handle correctly. + */ + if (bl->props.fb_blank != sinfo->bl_power) + power = bl->props.fb_blank; + else if (bl->props.power != sinfo->bl_power) + power = bl->props.power; + + if (brightness < 0 && power == FB_BLANK_UNBLANK) + brightness = lcdc_readl(sinfo, ATMEL_LCDC_CONTRAST_VAL); + else if (power != FB_BLANK_UNBLANK) + brightness = 0; + + lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_VAL, brightness); + if (contrast_ctr & ATMEL_LCDC_POL_POSITIVE) + lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_CTR, + brightness ? contrast_ctr : 0); + else + lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_CTR, contrast_ctr); + + bl->props.fb_blank = bl->props.power = sinfo->bl_power = power; + + return 0; +} + +static int atmel_bl_get_brightness(struct backlight_device *bl) +{ + struct atmel_lcdfb_info *sinfo = bl_get_data(bl); + + return lcdc_readl(sinfo, ATMEL_LCDC_CONTRAST_VAL); +} + +static const struct backlight_ops atmel_lcdc_bl_ops = { + .update_status = atmel_bl_update_status, + .get_brightness = atmel_bl_get_brightness, +}; + +static void init_backlight(struct atmel_lcdfb_info *sinfo) +{ + struct backlight_properties props; + struct backlight_device *bl; + + sinfo->bl_power = FB_BLANK_UNBLANK; + + if (sinfo->backlight) + return; + + memset(&props, 0, sizeof(struct backlight_properties)); + props.type = BACKLIGHT_RAW; + props.max_brightness = 0xff; + bl = backlight_device_register("backlight", &sinfo->pdev->dev, sinfo, + &atmel_lcdc_bl_ops, &props); + if (IS_ERR(bl)) { + dev_err(&sinfo->pdev->dev, "error %ld on backlight register\n", + PTR_ERR(bl)); + return; + } + sinfo->backlight = bl; + + bl->props.power = FB_BLANK_UNBLANK; + bl->props.fb_blank = FB_BLANK_UNBLANK; + bl->props.brightness = atmel_bl_get_brightness(bl); +} + +static void exit_backlight(struct atmel_lcdfb_info *sinfo) +{ + if (!sinfo->backlight) + return; + + if (sinfo->backlight->ops) { + sinfo->backlight->props.power = FB_BLANK_POWERDOWN; + sinfo->backlight->ops->update_status(sinfo->backlight); + } + backlight_device_unregister(sinfo->backlight); +} + +#else + +static void init_backlight(struct atmel_lcdfb_info *sinfo) +{ + dev_warn(&sinfo->pdev->dev, "backlight control is not available\n"); +} + +static void exit_backlight(struct atmel_lcdfb_info *sinfo) +{ +} + +#endif + +static void init_contrast(struct atmel_lcdfb_info *sinfo) +{ + struct atmel_lcdfb_pdata *pdata = &sinfo->pdata; + + /* contrast pwm can be 'inverted' */ + if (pdata->lcdcon_pol_negative) + contrast_ctr &= ~(ATMEL_LCDC_POL_POSITIVE); + + /* have some default contrast/backlight settings */ + lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_CTR, contrast_ctr); + lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_VAL, ATMEL_LCDC_CVAL_DEFAULT); + + if (pdata->lcdcon_is_backlight) + init_backlight(sinfo); +} + +static inline void atmel_lcdfb_power_control(struct atmel_lcdfb_info *sinfo, int on) +{ + int ret; + struct atmel_lcdfb_pdata *pdata = &sinfo->pdata; + + if (pdata->atmel_lcdfb_power_control) + pdata->atmel_lcdfb_power_control(pdata, on); + else if (sinfo->reg_lcd) { + if (on) { + ret = regulator_enable(sinfo->reg_lcd); + if (ret) + dev_err(&sinfo->pdev->dev, + "lcd regulator enable failed: %d\n", ret); + } else { + ret = regulator_disable(sinfo->reg_lcd); + if (ret) + dev_err(&sinfo->pdev->dev, + "lcd regulator disable failed: %d\n", ret); + } + } +} + +static const struct fb_fix_screeninfo atmel_lcdfb_fix __initconst = { + .type = FB_TYPE_PACKED_PIXELS, + .visual = FB_VISUAL_TRUECOLOR, + .xpanstep = 0, + .ypanstep = 1, + .ywrapstep = 0, + .accel = FB_ACCEL_NONE, +}; + +static unsigned long compute_hozval(struct atmel_lcdfb_info *sinfo, + unsigned long xres) +{ + unsigned long lcdcon2; + unsigned long value; + + if (!sinfo->config->have_hozval) + return xres; + + lcdcon2 = lcdc_readl(sinfo, ATMEL_LCDC_LCDCON2); + value = xres; + if ((lcdcon2 & ATMEL_LCDC_DISTYPE) != ATMEL_LCDC_DISTYPE_TFT) { + /* STN display */ + if ((lcdcon2 & ATMEL_LCDC_DISTYPE) == ATMEL_LCDC_DISTYPE_STNCOLOR) { + value *= 3; + } + if ( (lcdcon2 & ATMEL_LCDC_IFWIDTH) == ATMEL_LCDC_IFWIDTH_4 + || ( (lcdcon2 & ATMEL_LCDC_IFWIDTH) == ATMEL_LCDC_IFWIDTH_8 + && (lcdcon2 & ATMEL_LCDC_SCANMOD) == ATMEL_LCDC_SCANMOD_DUAL )) + value = DIV_ROUND_UP(value, 4); + else + value = DIV_ROUND_UP(value, 8); + } + + return value; +} + +static void atmel_lcdfb_stop_nowait(struct atmel_lcdfb_info *sinfo) +{ + struct atmel_lcdfb_pdata *pdata = &sinfo->pdata; + + /* Turn off the LCD controller and the DMA controller */ + lcdc_writel(sinfo, ATMEL_LCDC_PWRCON, + pdata->guard_time << ATMEL_LCDC_GUARDT_OFFSET); + + /* Wait for the LCDC core to become idle */ + while (lcdc_readl(sinfo, ATMEL_LCDC_PWRCON) & ATMEL_LCDC_BUSY) + msleep(10); + + lcdc_writel(sinfo, ATMEL_LCDC_DMACON, 0); +} + +static void atmel_lcdfb_stop(struct atmel_lcdfb_info *sinfo) +{ + atmel_lcdfb_stop_nowait(sinfo); + + /* Wait for DMA engine to become idle... */ + while (lcdc_readl(sinfo, ATMEL_LCDC_DMACON) & ATMEL_LCDC_DMABUSY) + msleep(10); +} + +static void atmel_lcdfb_start(struct atmel_lcdfb_info *sinfo) +{ + struct atmel_lcdfb_pdata *pdata = &sinfo->pdata; + + lcdc_writel(sinfo, ATMEL_LCDC_DMACON, pdata->default_dmacon); + lcdc_writel(sinfo, ATMEL_LCDC_PWRCON, + (pdata->guard_time << ATMEL_LCDC_GUARDT_OFFSET) + | ATMEL_LCDC_PWR); +} + +static void atmel_lcdfb_update_dma(struct fb_info *info, + struct fb_var_screeninfo *var) +{ + struct atmel_lcdfb_info *sinfo = info->par; + struct fb_fix_screeninfo *fix = &info->fix; + unsigned long dma_addr; + + dma_addr = (fix->smem_start + var->yoffset * fix->line_length + + var->xoffset * info->var.bits_per_pixel / 8); + + dma_addr &= ~3UL; + + /* Set framebuffer DMA base address and pixel offset */ + lcdc_writel(sinfo, ATMEL_LCDC_DMABADDR1, dma_addr); + + atmel_lcdfb_update_dma2d(sinfo, var, info); +} + +static inline void atmel_lcdfb_free_video_memory(struct atmel_lcdfb_info *sinfo) +{ + struct fb_info *info = sinfo->info; + + dma_free_wc(info->device, info->fix.smem_len, info->screen_base, + info->fix.smem_start); +} + +/** + * atmel_lcdfb_alloc_video_memory - Allocate framebuffer memory + * @sinfo: the frame buffer to allocate memory for + * + * This function is called only from the atmel_lcdfb_probe() + * so no locking by fb_info->mm_lock around smem_len setting is needed. + */ +static int atmel_lcdfb_alloc_video_memory(struct atmel_lcdfb_info *sinfo) +{ + struct fb_info *info = sinfo->info; + struct fb_var_screeninfo *var = &info->var; + unsigned int smem_len; + + smem_len = (var->xres_virtual * var->yres_virtual + * ((var->bits_per_pixel + 7) / 8)); + info->fix.smem_len = max(smem_len, sinfo->smem_len); + + info->screen_base = dma_alloc_wc(info->device, info->fix.smem_len, + (dma_addr_t *)&info->fix.smem_start, + GFP_KERNEL); + + if (!info->screen_base) { + return -ENOMEM; + } + + memset(info->screen_base, 0, info->fix.smem_len); + + return 0; +} + +static const struct fb_videomode *atmel_lcdfb_choose_mode(struct fb_var_screeninfo *var, + struct fb_info *info) +{ + struct fb_videomode varfbmode; + const struct fb_videomode *fbmode = NULL; + + fb_var_to_videomode(&varfbmode, var); + fbmode = fb_find_nearest_mode(&varfbmode, &info->modelist); + if (fbmode) + fb_videomode_to_var(var, fbmode); + return fbmode; +} + + +/** + * atmel_lcdfb_check_var - Validates a var passed in. + * @var: frame buffer variable screen structure + * @info: frame buffer structure that represents a single frame buffer + * + * Checks to see if the hardware supports the state requested by + * var passed in. This function does not alter the hardware + * state!!! This means the data stored in struct fb_info and + * struct atmel_lcdfb_info do not change. This includes the var + * inside of struct fb_info. Do NOT change these. This function + * can be called on its own if we intent to only test a mode and + * not actually set it. The stuff in modedb.c is a example of + * this. If the var passed in is slightly off by what the + * hardware can support then we alter the var PASSED in to what + * we can do. If the hardware doesn't support mode change a + * -EINVAL will be returned by the upper layers. You don't need + * to implement this function then. If you hardware doesn't + * support changing the resolution then this function is not + * needed. In this case the driver would just provide a var that + * represents the static state the screen is in. + * + * Returns negative errno on error, or zero on success. + */ +static int atmel_lcdfb_check_var(struct fb_var_screeninfo *var, + struct fb_info *info) +{ + struct device *dev = info->device; + struct atmel_lcdfb_info *sinfo = info->par; + struct atmel_lcdfb_pdata *pdata = &sinfo->pdata; + unsigned long clk_value_khz; + + clk_value_khz = clk_get_rate(sinfo->lcdc_clk) / 1000; + + dev_dbg(dev, "%s:\n", __func__); + + if (!(var->pixclock && var->bits_per_pixel)) { + /* choose a suitable mode if possible */ + if (!atmel_lcdfb_choose_mode(var, info)) { + dev_err(dev, "needed value not specified\n"); + return -EINVAL; + } + } + + dev_dbg(dev, " resolution: %ux%u\n", var->xres, var->yres); + dev_dbg(dev, " pixclk: %lu KHz\n", PICOS2KHZ(var->pixclock)); + dev_dbg(dev, " bpp: %u\n", var->bits_per_pixel); + dev_dbg(dev, " clk: %lu KHz\n", clk_value_khz); + + if (PICOS2KHZ(var->pixclock) > clk_value_khz) { + dev_err(dev, "%lu KHz pixel clock is too fast\n", PICOS2KHZ(var->pixclock)); + return -EINVAL; + } + + /* Do not allow to have real resoulution larger than virtual */ + if (var->xres > var->xres_virtual) + var->xres_virtual = var->xres; + + if (var->yres > var->yres_virtual) + var->yres_virtual = var->yres; + + /* Force same alignment for each line */ + var->xres = (var->xres + 3) & ~3UL; + var->xres_virtual = (var->xres_virtual + 3) & ~3UL; + + var->red.msb_right = var->green.msb_right = var->blue.msb_right = 0; + var->transp.msb_right = 0; + var->transp.offset = var->transp.length = 0; + var->xoffset = var->yoffset = 0; + + if (info->fix.smem_len) { + unsigned int smem_len = (var->xres_virtual * var->yres_virtual + * ((var->bits_per_pixel + 7) / 8)); + if (smem_len > info->fix.smem_len) { + dev_err(dev, "Frame buffer is too small (%u) for screen size (need at least %u)\n", + info->fix.smem_len, smem_len); + return -EINVAL; + } + } + + /* Saturate vertical and horizontal timings at maximum values */ + var->vsync_len = min_t(u32, var->vsync_len, + (ATMEL_LCDC_VPW >> ATMEL_LCDC_VPW_OFFSET) + 1); + var->upper_margin = min_t(u32, var->upper_margin, + ATMEL_LCDC_VBP >> ATMEL_LCDC_VBP_OFFSET); + var->lower_margin = min_t(u32, var->lower_margin, + ATMEL_LCDC_VFP); + var->right_margin = min_t(u32, var->right_margin, + (ATMEL_LCDC_HFP >> ATMEL_LCDC_HFP_OFFSET) + 1); + var->hsync_len = min_t(u32, var->hsync_len, + (ATMEL_LCDC_HPW >> ATMEL_LCDC_HPW_OFFSET) + 1); + var->left_margin = min_t(u32, var->left_margin, + ATMEL_LCDC_HBP + 1); + + /* Some parameters can't be zero */ + var->vsync_len = max_t(u32, var->vsync_len, 1); + var->right_margin = max_t(u32, var->right_margin, 1); + var->hsync_len = max_t(u32, var->hsync_len, 1); + var->left_margin = max_t(u32, var->left_margin, 1); + + switch (var->bits_per_pixel) { + case 1: + case 2: + case 4: + case 8: + var->red.offset = var->green.offset = var->blue.offset = 0; + var->red.length = var->green.length = var->blue.length + = var->bits_per_pixel; + break; + case 16: + /* Older SOCs use IBGR:555 rather than BGR:565. */ + if (sinfo->config->have_intensity_bit) + var->green.length = 5; + else + var->green.length = 6; + + if (pdata->lcd_wiring_mode == ATMEL_LCDC_WIRING_RGB) { + /* RGB:5X5 mode */ + var->red.offset = var->green.length + 5; + var->blue.offset = 0; + } else { + /* BGR:5X5 mode */ + var->red.offset = 0; + var->blue.offset = var->green.length + 5; + } + var->green.offset = 5; + var->red.length = var->blue.length = 5; + break; + case 32: + var->transp.offset = 24; + var->transp.length = 8; + /* fall through */ + case 24: + if (pdata->lcd_wiring_mode == ATMEL_LCDC_WIRING_RGB) { + /* RGB:888 mode */ + var->red.offset = 16; + var->blue.offset = 0; + } else { + /* BGR:888 mode */ + var->red.offset = 0; + var->blue.offset = 16; + } + var->green.offset = 8; + var->red.length = var->green.length = var->blue.length = 8; + break; + default: + dev_err(dev, "color depth %d not supported\n", + var->bits_per_pixel); + return -EINVAL; + } + + return 0; +} + +/* + * LCD reset sequence + */ +static void atmel_lcdfb_reset(struct atmel_lcdfb_info *sinfo) +{ + might_sleep(); + + atmel_lcdfb_stop(sinfo); + atmel_lcdfb_start(sinfo); +} + +/** + * atmel_lcdfb_set_par - Alters the hardware state. + * @info: frame buffer structure that represents a single frame buffer + * + * Using the fb_var_screeninfo in fb_info we set the resolution + * of the this particular framebuffer. This function alters the + * par AND the fb_fix_screeninfo stored in fb_info. It doesn't + * not alter var in fb_info since we are using that data. This + * means we depend on the data in var inside fb_info to be + * supported by the hardware. atmel_lcdfb_check_var is always called + * before atmel_lcdfb_set_par to ensure this. Again if you can't + * change the resolution you don't need this function. + * + */ +static int atmel_lcdfb_set_par(struct fb_info *info) +{ + struct atmel_lcdfb_info *sinfo = info->par; + struct atmel_lcdfb_pdata *pdata = &sinfo->pdata; + unsigned long hozval_linesz; + unsigned long value; + unsigned long clk_value_khz; + unsigned long bits_per_line; + unsigned long pix_factor = 2; + + might_sleep(); + + dev_dbg(info->device, "%s:\n", __func__); + dev_dbg(info->device, " * resolution: %ux%u (%ux%u virtual)\n", + info->var.xres, info->var.yres, + info->var.xres_virtual, info->var.yres_virtual); + + atmel_lcdfb_stop_nowait(sinfo); + + if (info->var.bits_per_pixel == 1) + info->fix.visual = FB_VISUAL_MONO01; + else if (info->var.bits_per_pixel <= 8) + info->fix.visual = FB_VISUAL_PSEUDOCOLOR; + else + info->fix.visual = FB_VISUAL_TRUECOLOR; + + bits_per_line = info->var.xres_virtual * info->var.bits_per_pixel; + info->fix.line_length = DIV_ROUND_UP(bits_per_line, 8); + + /* Re-initialize the DMA engine... */ + dev_dbg(info->device, " * update DMA engine\n"); + atmel_lcdfb_update_dma(info, &info->var); + + /* ...set frame size and burst length = 8 words (?) */ + value = (info->var.yres * info->var.xres * info->var.bits_per_pixel) / 32; + value |= ((ATMEL_LCDC_DMA_BURST_LEN - 1) << ATMEL_LCDC_BLENGTH_OFFSET); + lcdc_writel(sinfo, ATMEL_LCDC_DMAFRMCFG, value); + + /* Now, the LCDC core... */ + + /* Set pixel clock */ + if (sinfo->config->have_alt_pixclock) + pix_factor = 1; + + clk_value_khz = clk_get_rate(sinfo->lcdc_clk) / 1000; + + value = DIV_ROUND_UP(clk_value_khz, PICOS2KHZ(info->var.pixclock)); + + if (value < pix_factor) { + dev_notice(info->device, "Bypassing pixel clock divider\n"); + lcdc_writel(sinfo, ATMEL_LCDC_LCDCON1, ATMEL_LCDC_BYPASS); + } else { + value = (value / pix_factor) - 1; + dev_dbg(info->device, " * programming CLKVAL = 0x%08lx\n", + value); + lcdc_writel(sinfo, ATMEL_LCDC_LCDCON1, + value << ATMEL_LCDC_CLKVAL_OFFSET); + info->var.pixclock = + KHZ2PICOS(clk_value_khz / (pix_factor * (value + 1))); + dev_dbg(info->device, " updated pixclk: %lu KHz\n", + PICOS2KHZ(info->var.pixclock)); + } + + + /* Initialize control register 2 */ + value = pdata->default_lcdcon2; + + if (!(info->var.sync & FB_SYNC_HOR_HIGH_ACT)) + value |= ATMEL_LCDC_INVLINE_INVERTED; + if (!(info->var.sync & FB_SYNC_VERT_HIGH_ACT)) + value |= ATMEL_LCDC_INVFRAME_INVERTED; + + switch (info->var.bits_per_pixel) { + case 1: value |= ATMEL_LCDC_PIXELSIZE_1; break; + case 2: value |= ATMEL_LCDC_PIXELSIZE_2; break; + case 4: value |= ATMEL_LCDC_PIXELSIZE_4; break; + case 8: value |= ATMEL_LCDC_PIXELSIZE_8; break; + case 15: /* fall through */ + case 16: value |= ATMEL_LCDC_PIXELSIZE_16; break; + case 24: value |= ATMEL_LCDC_PIXELSIZE_24; break; + case 32: value |= ATMEL_LCDC_PIXELSIZE_32; break; + default: BUG(); break; + } + dev_dbg(info->device, " * LCDCON2 = %08lx\n", value); + lcdc_writel(sinfo, ATMEL_LCDC_LCDCON2, value); + + /* Vertical timing */ + value = (info->var.vsync_len - 1) << ATMEL_LCDC_VPW_OFFSET; + value |= info->var.upper_margin << ATMEL_LCDC_VBP_OFFSET; + value |= info->var.lower_margin; + dev_dbg(info->device, " * LCDTIM1 = %08lx\n", value); + lcdc_writel(sinfo, ATMEL_LCDC_TIM1, value); + + /* Horizontal timing */ + value = (info->var.right_margin - 1) << ATMEL_LCDC_HFP_OFFSET; + value |= (info->var.hsync_len - 1) << ATMEL_LCDC_HPW_OFFSET; + value |= (info->var.left_margin - 1); + dev_dbg(info->device, " * LCDTIM2 = %08lx\n", value); + lcdc_writel(sinfo, ATMEL_LCDC_TIM2, value); + + /* Horizontal value (aka line size) */ + hozval_linesz = compute_hozval(sinfo, info->var.xres); + + /* Display size */ + value = (hozval_linesz - 1) << ATMEL_LCDC_HOZVAL_OFFSET; + value |= info->var.yres - 1; + dev_dbg(info->device, " * LCDFRMCFG = %08lx\n", value); + lcdc_writel(sinfo, ATMEL_LCDC_LCDFRMCFG, value); + + /* FIFO Threshold: Use formula from data sheet */ + value = ATMEL_LCDC_FIFO_SIZE - (2 * ATMEL_LCDC_DMA_BURST_LEN + 3); + lcdc_writel(sinfo, ATMEL_LCDC_FIFO, value); + + /* Toggle LCD_MODE every frame */ + lcdc_writel(sinfo, ATMEL_LCDC_MVAL, 0); + + /* Disable all interrupts */ + lcdc_writel(sinfo, ATMEL_LCDC_IDR, ~0UL); + /* Enable FIFO & DMA errors */ + lcdc_writel(sinfo, ATMEL_LCDC_IER, ATMEL_LCDC_UFLWI | ATMEL_LCDC_OWRI | ATMEL_LCDC_MERI); + + /* ...wait for DMA engine to become idle... */ + while (lcdc_readl(sinfo, ATMEL_LCDC_DMACON) & ATMEL_LCDC_DMABUSY) + msleep(10); + + atmel_lcdfb_start(sinfo); + + dev_dbg(info->device, " * DONE\n"); + + return 0; +} + +static inline unsigned int chan_to_field(unsigned int chan, const struct fb_bitfield *bf) +{ + chan &= 0xffff; + chan >>= 16 - bf->length; + return chan << bf->offset; +} + +/** + * atmel_lcdfb_setcolreg - Optional function. Sets a color register. + * @regno: Which register in the CLUT we are programming + * @red: The red value which can be up to 16 bits wide + * @green: The green value which can be up to 16 bits wide + * @blue: The blue value which can be up to 16 bits wide. + * @transp: If supported the alpha value which can be up to 16 bits wide. + * @info: frame buffer info structure + * + * Set a single color register. The values supplied have a 16 bit + * magnitude which needs to be scaled in this function for the hardware. + * Things to take into consideration are how many color registers, if + * any, are supported with the current color visual. With truecolor mode + * no color palettes are supported. Here a pseudo palette is created + * which we store the value in pseudo_palette in struct fb_info. For + * pseudocolor mode we have a limited color palette. To deal with this + * we can program what color is displayed for a particular pixel value. + * DirectColor is similar in that we can program each color field. If + * we have a static colormap we don't need to implement this function. + * + * Returns negative errno on error, or zero on success. In an + * ideal world, this would have been the case, but as it turns + * out, the other drivers return 1 on failure, so that's what + * we're going to do. + */ +static int atmel_lcdfb_setcolreg(unsigned int regno, unsigned int red, + unsigned int green, unsigned int blue, + unsigned int transp, struct fb_info *info) +{ + struct atmel_lcdfb_info *sinfo = info->par; + struct atmel_lcdfb_pdata *pdata = &sinfo->pdata; + unsigned int val; + u32 *pal; + int ret = 1; + + if (info->var.grayscale) + red = green = blue = (19595 * red + 38470 * green + + 7471 * blue) >> 16; + + switch (info->fix.visual) { + case FB_VISUAL_TRUECOLOR: + if (regno < 16) { + pal = info->pseudo_palette; + + val = chan_to_field(red, &info->var.red); + val |= chan_to_field(green, &info->var.green); + val |= chan_to_field(blue, &info->var.blue); + + pal[regno] = val; + ret = 0; + } + break; + + case FB_VISUAL_PSEUDOCOLOR: + if (regno < 256) { + if (sinfo->config->have_intensity_bit) { + /* old style I+BGR:555 */ + val = ((red >> 11) & 0x001f); + val |= ((green >> 6) & 0x03e0); + val |= ((blue >> 1) & 0x7c00); + + /* + * TODO: intensity bit. Maybe something like + * ~(red[10] ^ green[10] ^ blue[10]) & 1 + */ + } else { + /* new style BGR:565 / RGB:565 */ + if (pdata->lcd_wiring_mode == ATMEL_LCDC_WIRING_RGB) { + val = ((blue >> 11) & 0x001f); + val |= ((red >> 0) & 0xf800); + } else { + val = ((red >> 11) & 0x001f); + val |= ((blue >> 0) & 0xf800); + } + + val |= ((green >> 5) & 0x07e0); + } + + lcdc_writel(sinfo, ATMEL_LCDC_LUT(regno), val); + ret = 0; + } + break; + + case FB_VISUAL_MONO01: + if (regno < 2) { + val = (regno == 0) ? 0x00 : 0x1F; + lcdc_writel(sinfo, ATMEL_LCDC_LUT(regno), val); + ret = 0; + } + break; + + } + + return ret; +} + +static int atmel_lcdfb_pan_display(struct fb_var_screeninfo *var, + struct fb_info *info) +{ + dev_dbg(info->device, "%s\n", __func__); + + atmel_lcdfb_update_dma(info, var); + + return 0; +} + +static int atmel_lcdfb_blank(int blank_mode, struct fb_info *info) +{ + struct atmel_lcdfb_info *sinfo = info->par; + + switch (blank_mode) { + case FB_BLANK_UNBLANK: + case FB_BLANK_NORMAL: + atmel_lcdfb_start(sinfo); + break; + case FB_BLANK_VSYNC_SUSPEND: + case FB_BLANK_HSYNC_SUSPEND: + break; + case FB_BLANK_POWERDOWN: + atmel_lcdfb_stop(sinfo); + break; + default: + return -EINVAL; + } + + /* let fbcon do a soft blank for us */ + return ((blank_mode == FB_BLANK_NORMAL) ? 1 : 0); +} + +static struct fb_ops atmel_lcdfb_ops = { + .owner = THIS_MODULE, + .fb_check_var = atmel_lcdfb_check_var, + .fb_set_par = atmel_lcdfb_set_par, + .fb_setcolreg = atmel_lcdfb_setcolreg, + .fb_blank = atmel_lcdfb_blank, + .fb_pan_display = atmel_lcdfb_pan_display, + .fb_fillrect = cfb_fillrect, + .fb_copyarea = cfb_copyarea, + .fb_imageblit = cfb_imageblit, +}; + +static irqreturn_t atmel_lcdfb_interrupt(int irq, void *dev_id) +{ + struct fb_info *info = dev_id; + struct atmel_lcdfb_info *sinfo = info->par; + u32 status; + + status = lcdc_readl(sinfo, ATMEL_LCDC_ISR); + if (status & ATMEL_LCDC_UFLWI) { + dev_warn(info->device, "FIFO underflow %#x\n", status); + /* reset DMA and FIFO to avoid screen shifting */ + schedule_work(&sinfo->task); + } + lcdc_writel(sinfo, ATMEL_LCDC_ICR, status); + return IRQ_HANDLED; +} + +/* + * LCD controller task (to reset the LCD) + */ +static void atmel_lcdfb_task(struct work_struct *work) +{ + struct atmel_lcdfb_info *sinfo = + container_of(work, struct atmel_lcdfb_info, task); + + atmel_lcdfb_reset(sinfo); +} + +static int __init atmel_lcdfb_init_fbinfo(struct atmel_lcdfb_info *sinfo) +{ + struct fb_info *info = sinfo->info; + int ret = 0; + + info->var.activate |= FB_ACTIVATE_FORCE | FB_ACTIVATE_NOW; + + dev_info(info->device, + "%luKiB frame buffer at %08lx (mapped at %p)\n", + (unsigned long)info->fix.smem_len / 1024, + (unsigned long)info->fix.smem_start, + info->screen_base); + + /* Allocate colormap */ + ret = fb_alloc_cmap(&info->cmap, 256, 0); + if (ret < 0) + dev_err(info->device, "Alloc color map failed\n"); + + return ret; +} + +static void atmel_lcdfb_start_clock(struct atmel_lcdfb_info *sinfo) +{ + clk_prepare_enable(sinfo->bus_clk); + clk_prepare_enable(sinfo->lcdc_clk); +} + +static void atmel_lcdfb_stop_clock(struct atmel_lcdfb_info *sinfo) +{ + clk_disable_unprepare(sinfo->bus_clk); + clk_disable_unprepare(sinfo->lcdc_clk); +} + +#ifdef CONFIG_OF +static const struct of_device_id atmel_lcdfb_dt_ids[] = { + { .compatible = "atmel,at91sam9261-lcdc" , .data = &at91sam9261_config, }, + { .compatible = "atmel,at91sam9263-lcdc" , .data = &at91sam9263_config, }, + { .compatible = "atmel,at91sam9g10-lcdc" , .data = &at91sam9g10_config, }, + { .compatible = "atmel,at91sam9g45-lcdc" , .data = &at91sam9g45_config, }, + { .compatible = "atmel,at91sam9g45es-lcdc" , .data = &at91sam9g45es_config, }, + { .compatible = "atmel,at91sam9rl-lcdc" , .data = &at91sam9rl_config, }, + { .compatible = "atmel,at32ap-lcdc" , .data = &at32ap_config, }, + { /* sentinel */ } +}; + +MODULE_DEVICE_TABLE(of, atmel_lcdfb_dt_ids); + +static const char *atmel_lcdfb_wiring_modes[] = { + [ATMEL_LCDC_WIRING_BGR] = "BRG", + [ATMEL_LCDC_WIRING_RGB] = "RGB", +}; + +static int atmel_lcdfb_get_of_wiring_modes(struct device_node *np) +{ + const char *mode; + int err, i; + + err = of_property_read_string(np, "atmel,lcd-wiring-mode", &mode); + if (err < 0) + return ATMEL_LCDC_WIRING_BGR; + + for (i = 0; i < ARRAY_SIZE(atmel_lcdfb_wiring_modes); i++) + if (!strcasecmp(mode, atmel_lcdfb_wiring_modes[i])) + return i; + + return -ENODEV; +} + +static void atmel_lcdfb_power_control_gpio(struct atmel_lcdfb_pdata *pdata, int on) +{ + struct atmel_lcdfb_power_ctrl_gpio *og; + + list_for_each_entry(og, &pdata->pwr_gpios, list) + gpiod_set_value(og->gpiod, on); +} + +static int atmel_lcdfb_of_init(struct atmel_lcdfb_info *sinfo) +{ + struct fb_info *info = sinfo->info; + struct atmel_lcdfb_pdata *pdata = &sinfo->pdata; + struct fb_var_screeninfo *var = &info->var; + struct device *dev = &sinfo->pdev->dev; + struct device_node *np =dev->of_node; + struct device_node *display_np; + struct atmel_lcdfb_power_ctrl_gpio *og; + bool is_gpio_power = false; + struct fb_videomode fb_vm; + struct gpio_desc *gpiod; + struct videomode vm; + int ret = -ENOENT; + int i; + + sinfo->config = (struct atmel_lcdfb_config*) + of_match_device(atmel_lcdfb_dt_ids, dev)->data; + + display_np = of_parse_phandle(np, "display", 0); + if (!display_np) { + dev_err(dev, "failed to find display phandle\n"); + return -ENOENT; + } + + ret = of_property_read_u32(display_np, "bits-per-pixel", &var->bits_per_pixel); + if (ret < 0) { + dev_err(dev, "failed to get property bits-per-pixel\n"); + goto put_display_node; + } + + ret = of_property_read_u32(display_np, "atmel,guard-time", &pdata->guard_time); + if (ret < 0) { + dev_err(dev, "failed to get property atmel,guard-time\n"); + goto put_display_node; + } + + ret = of_property_read_u32(display_np, "atmel,lcdcon2", &pdata->default_lcdcon2); + if (ret < 0) { + dev_err(dev, "failed to get property atmel,lcdcon2\n"); + goto put_display_node; + } + + ret = of_property_read_u32(display_np, "atmel,dmacon", &pdata->default_dmacon); + if (ret < 0) { + dev_err(dev, "failed to get property bits-per-pixel\n"); + goto put_display_node; + } + + INIT_LIST_HEAD(&pdata->pwr_gpios); + for (i = 0; i < gpiod_count(dev, "atmel,power-control"); i++) { + ret = -ENOMEM; + gpiod = devm_gpiod_get_index(dev, "atmel,power-control", + i, GPIOD_ASIS); + if (IS_ERR(gpiod)) + continue; + + og = devm_kzalloc(dev, sizeof(*og), GFP_KERNEL); + if (!og) + goto put_display_node; + + og->gpiod = gpiod; + is_gpio_power = true; + + ret = gpiod_direction_output(gpiod, gpiod_is_active_low(gpiod)); + if (ret) { + dev_err(dev, "set direction output gpio atmel,power-control[%d] failed\n", i); + goto put_display_node; + } + list_add(&og->list, &pdata->pwr_gpios); + } + + if (is_gpio_power) + pdata->atmel_lcdfb_power_control = atmel_lcdfb_power_control_gpio; + + ret = atmel_lcdfb_get_of_wiring_modes(display_np); + if (ret < 0) { + dev_err(dev, "invalid atmel,lcd-wiring-mode\n"); + goto put_display_node; + } + pdata->lcd_wiring_mode = ret; + + pdata->lcdcon_is_backlight = of_property_read_bool(display_np, "atmel,lcdcon-backlight"); + pdata->lcdcon_pol_negative = of_property_read_bool(display_np, "atmel,lcdcon-backlight-inverted"); + + ret = of_get_videomode(display_np, &vm, OF_USE_NATIVE_MODE); + if (ret) { + dev_err(dev, "failed to get videomode from DT\n"); + goto put_display_node; + } + + ret = fb_videomode_from_videomode(&vm, &fb_vm); + if (ret < 0) + goto put_display_node; + + fb_add_videomode(&fb_vm, &info->modelist); + +put_display_node: + of_node_put(display_np); + return ret; +} +#else +static int atmel_lcdfb_of_init(struct atmel_lcdfb_info *sinfo) +{ + return 0; +} +#endif + +static int __init atmel_lcdfb_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct fb_info *info; + struct atmel_lcdfb_info *sinfo; + struct atmel_lcdfb_pdata *pdata = NULL; + struct resource *regs = NULL; + struct resource *map = NULL; + struct fb_modelist *modelist; + int ret; + + dev_dbg(dev, "%s BEGIN\n", __func__); + + ret = -ENOMEM; + info = framebuffer_alloc(sizeof(struct atmel_lcdfb_info), dev); + if (!info) { + dev_err(dev, "cannot allocate memory\n"); + goto out; + } + + sinfo = info->par; + sinfo->pdev = pdev; + sinfo->info = info; + + INIT_LIST_HEAD(&info->modelist); + + if (pdev->dev.of_node) { + ret = atmel_lcdfb_of_init(sinfo); + if (ret) + goto free_info; + } else if (dev_get_platdata(dev)) { + struct fb_monspecs *monspecs; + int i; + + pdata = dev_get_platdata(dev); + monspecs = pdata->default_monspecs; + sinfo->pdata = *pdata; + + for (i = 0; i < monspecs->modedb_len; i++) + fb_add_videomode(&monspecs->modedb[i], &info->modelist); + + sinfo->config = atmel_lcdfb_get_config(pdev); + + info->var.bits_per_pixel = pdata->default_bpp ? pdata->default_bpp : 16; + memcpy(&info->monspecs, pdata->default_monspecs, sizeof(info->monspecs)); + } else { + dev_err(dev, "cannot get default configuration\n"); + goto free_info; + } + + if (!sinfo->config) + goto free_info; + + sinfo->reg_lcd = devm_regulator_get(&pdev->dev, "lcd"); + if (IS_ERR(sinfo->reg_lcd)) + sinfo->reg_lcd = NULL; + + info->flags = ATMEL_LCDFB_FBINFO_DEFAULT; + info->pseudo_palette = sinfo->pseudo_palette; + info->fbops = &atmel_lcdfb_ops; + + info->fix = atmel_lcdfb_fix; + strcpy(info->fix.id, sinfo->pdev->name); + + /* Enable LCDC Clocks */ + sinfo->bus_clk = clk_get(dev, "hclk"); + if (IS_ERR(sinfo->bus_clk)) { + ret = PTR_ERR(sinfo->bus_clk); + goto free_info; + } + sinfo->lcdc_clk = clk_get(dev, "lcdc_clk"); + if (IS_ERR(sinfo->lcdc_clk)) { + ret = PTR_ERR(sinfo->lcdc_clk); + goto put_bus_clk; + } + atmel_lcdfb_start_clock(sinfo); + + modelist = list_first_entry(&info->modelist, + struct fb_modelist, list); + fb_videomode_to_var(&info->var, &modelist->mode); + + atmel_lcdfb_check_var(&info->var, info); + + regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!regs) { + dev_err(dev, "resources unusable\n"); + ret = -ENXIO; + goto stop_clk; + } + + sinfo->irq_base = platform_get_irq(pdev, 0); + if (sinfo->irq_base < 0) { + dev_err(dev, "unable to get irq\n"); + ret = sinfo->irq_base; + goto stop_clk; + } + + /* Initialize video memory */ + map = platform_get_resource(pdev, IORESOURCE_MEM, 1); + if (map) { + /* use a pre-allocated memory buffer */ + info->fix.smem_start = map->start; + info->fix.smem_len = resource_size(map); + if (!request_mem_region(info->fix.smem_start, + info->fix.smem_len, pdev->name)) { + ret = -EBUSY; + goto stop_clk; + } + + info->screen_base = ioremap_wc(info->fix.smem_start, + info->fix.smem_len); + if (!info->screen_base) { + ret = -ENOMEM; + goto release_intmem; + } + + /* + * Don't clear the framebuffer -- someone may have set + * up a splash image. + */ + } else { + /* allocate memory buffer */ + ret = atmel_lcdfb_alloc_video_memory(sinfo); + if (ret < 0) { + dev_err(dev, "cannot allocate framebuffer: %d\n", ret); + goto stop_clk; + } + } + + /* LCDC registers */ + info->fix.mmio_start = regs->start; + info->fix.mmio_len = resource_size(regs); + + if (!request_mem_region(info->fix.mmio_start, + info->fix.mmio_len, pdev->name)) { + ret = -EBUSY; + goto free_fb; + } + + sinfo->mmio = ioremap(info->fix.mmio_start, info->fix.mmio_len); + if (!sinfo->mmio) { + dev_err(dev, "cannot map LCDC registers\n"); + ret = -ENOMEM; + goto release_mem; + } + + /* Initialize PWM for contrast or backlight ("off") */ + init_contrast(sinfo); + + /* interrupt */ + ret = request_irq(sinfo->irq_base, atmel_lcdfb_interrupt, 0, pdev->name, info); + if (ret) { + dev_err(dev, "request_irq failed: %d\n", ret); + goto unmap_mmio; + } + + /* Some operations on the LCDC might sleep and + * require a preemptible task context */ + INIT_WORK(&sinfo->task, atmel_lcdfb_task); + + ret = atmel_lcdfb_init_fbinfo(sinfo); + if (ret < 0) { + dev_err(dev, "init fbinfo failed: %d\n", ret); + goto unregister_irqs; + } + + ret = atmel_lcdfb_set_par(info); + if (ret < 0) { + dev_err(dev, "set par failed: %d\n", ret); + goto unregister_irqs; + } + + dev_set_drvdata(dev, info); + + /* + * Tell the world that we're ready to go + */ + ret = register_framebuffer(info); + if (ret < 0) { + dev_err(dev, "failed to register framebuffer device: %d\n", ret); + goto reset_drvdata; + } + + /* Power up the LCDC screen */ + atmel_lcdfb_power_control(sinfo, 1); + + dev_info(dev, "fb%d: Atmel LCDC at 0x%08lx (mapped at %p), irq %d\n", + info->node, info->fix.mmio_start, sinfo->mmio, sinfo->irq_base); + + return 0; + +reset_drvdata: + dev_set_drvdata(dev, NULL); + fb_dealloc_cmap(&info->cmap); +unregister_irqs: + cancel_work_sync(&sinfo->task); + free_irq(sinfo->irq_base, info); +unmap_mmio: + exit_backlight(sinfo); + iounmap(sinfo->mmio); +release_mem: + release_mem_region(info->fix.mmio_start, info->fix.mmio_len); +free_fb: + if (map) + iounmap(info->screen_base); + else + atmel_lcdfb_free_video_memory(sinfo); + +release_intmem: + if (map) + release_mem_region(info->fix.smem_start, info->fix.smem_len); +stop_clk: + atmel_lcdfb_stop_clock(sinfo); + clk_put(sinfo->lcdc_clk); +put_bus_clk: + clk_put(sinfo->bus_clk); +free_info: + framebuffer_release(info); +out: + dev_dbg(dev, "%s FAILED\n", __func__); + return ret; +} + +static int __exit atmel_lcdfb_remove(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct fb_info *info = dev_get_drvdata(dev); + struct atmel_lcdfb_info *sinfo; + struct atmel_lcdfb_pdata *pdata; + + if (!info || !info->par) + return 0; + sinfo = info->par; + pdata = &sinfo->pdata; + + cancel_work_sync(&sinfo->task); + exit_backlight(sinfo); + atmel_lcdfb_power_control(sinfo, 0); + unregister_framebuffer(info); + atmel_lcdfb_stop_clock(sinfo); + clk_put(sinfo->lcdc_clk); + clk_put(sinfo->bus_clk); + fb_dealloc_cmap(&info->cmap); + free_irq(sinfo->irq_base, info); + iounmap(sinfo->mmio); + release_mem_region(info->fix.mmio_start, info->fix.mmio_len); + if (platform_get_resource(pdev, IORESOURCE_MEM, 1)) { + iounmap(info->screen_base); + release_mem_region(info->fix.smem_start, info->fix.smem_len); + } else { + atmel_lcdfb_free_video_memory(sinfo); + } + + framebuffer_release(info); + + return 0; +} + +#ifdef CONFIG_PM + +static int atmel_lcdfb_suspend(struct platform_device *pdev, pm_message_t mesg) +{ + struct fb_info *info = platform_get_drvdata(pdev); + struct atmel_lcdfb_info *sinfo = info->par; + + /* + * We don't want to handle interrupts while the clock is + * stopped. It may take forever. + */ + lcdc_writel(sinfo, ATMEL_LCDC_IDR, ~0UL); + + sinfo->saved_lcdcon = lcdc_readl(sinfo, ATMEL_LCDC_CONTRAST_CTR); + lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_CTR, 0); + atmel_lcdfb_power_control(sinfo, 0); + atmel_lcdfb_stop(sinfo); + atmel_lcdfb_stop_clock(sinfo); + + return 0; +} + +static int atmel_lcdfb_resume(struct platform_device *pdev) +{ + struct fb_info *info = platform_get_drvdata(pdev); + struct atmel_lcdfb_info *sinfo = info->par; + + atmel_lcdfb_start_clock(sinfo); + atmel_lcdfb_start(sinfo); + atmel_lcdfb_power_control(sinfo, 1); + lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_CTR, sinfo->saved_lcdcon); + + /* Enable FIFO & DMA errors */ + lcdc_writel(sinfo, ATMEL_LCDC_IER, ATMEL_LCDC_UFLWI + | ATMEL_LCDC_OWRI | ATMEL_LCDC_MERI); + + return 0; +} + +#else +#define atmel_lcdfb_suspend NULL +#define atmel_lcdfb_resume NULL +#endif + +static struct platform_driver atmel_lcdfb_driver = { + .remove = __exit_p(atmel_lcdfb_remove), + .suspend = atmel_lcdfb_suspend, + .resume = atmel_lcdfb_resume, + .id_table = atmel_lcdfb_devtypes, + .driver = { + .name = "atmel_lcdfb", + .of_match_table = of_match_ptr(atmel_lcdfb_dt_ids), + }, +}; + +module_platform_driver_probe(atmel_lcdfb_driver, atmel_lcdfb_probe); + +MODULE_DESCRIPTION("AT91/AT32 LCD Controller framebuffer driver"); +MODULE_AUTHOR("Nicolas Ferre <nicolas.ferre@atmel.com>"); +MODULE_LICENSE("GPL"); |