diff options
Diffstat (limited to 'drivers/watchdog')
172 files changed, 58487 insertions, 0 deletions
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig new file mode 100644 index 000000000..92fdc7dc2 --- /dev/null +++ b/drivers/watchdog/Kconfig @@ -0,0 +1,2018 @@ + +# +# Watchdog device configuration +# + +menuconfig WATCHDOG + bool "Watchdog Timer Support" + ---help--- + If you say Y here (and to one of the following options) and create a + character special file /dev/watchdog with major number 10 and minor + number 130 using mknod ("man mknod"), you will get a watchdog, i.e.: + subsequently opening the file and then failing to write to it for + longer than 1 minute will result in rebooting the machine. This + could be useful for a networked machine that needs to come back + on-line as fast as possible after a lock-up. There's both a watchdog + implementation entirely in software (which can sometimes fail to + reboot the machine) and a driver for hardware watchdog boards, which + are more robust and can also keep track of the temperature inside + your computer. For details, read + <file:Documentation/watchdog/watchdog-api.txt> in the kernel source. + + The watchdog is usually used together with the watchdog daemon + which is available from + <ftp://ibiblio.org/pub/Linux/system/daemons/watchdog/>. This daemon can + also monitor NFS connections and can reboot the machine when the process + table is full. + + If unsure, say N. + +if WATCHDOG + +config WATCHDOG_CORE + bool "WatchDog Timer Driver Core" + ---help--- + Say Y here if you want to use the new watchdog timer driver core. + This driver provides a framework for all watchdog timer drivers + and gives them the /dev/watchdog interface (and later also the + sysfs interface). + +config WATCHDOG_NOWAYOUT + bool "Disable watchdog shutdown on close" + help + The default watchdog behaviour (which you get if you say N here) is + to stop the timer if the process managing it closes the file + /dev/watchdog. It's always remotely possible that this process might + get killed. If you say Y here, the watchdog cannot be stopped once + it has been started. + +config WATCHDOG_HANDLE_BOOT_ENABLED + bool "Update boot-enabled watchdog until userspace takes over" + default y + help + The default watchdog behaviour (which you get if you say Y here) is + to ping watchdog devices that were enabled before the driver has + been loaded until control is taken over from userspace using the + /dev/watchdog file. If you say N here, the kernel will not update + the watchdog on its own. Thus if your userspace does not start fast + enough your device will reboot. + +config WATCHDOG_SYSFS + bool "Read different watchdog information through sysfs" + help + Say Y here if you want to enable watchdog device status read through + sysfs attributes. + +# +# General Watchdog drivers +# + +comment "Watchdog Device Drivers" + +# Architecture Independent + +config SOFT_WATCHDOG + tristate "Software watchdog" + select WATCHDOG_CORE + help + A software monitoring watchdog. This will fail to reboot your system + from some situations that the hardware watchdog will recover + from. Equally it's a lot cheaper to install. + + To compile this driver as a module, choose M here: the + module will be called softdog. + +config SOFT_WATCHDOG_PRETIMEOUT + bool "Software watchdog pretimeout governor support" + depends on SOFT_WATCHDOG && WATCHDOG_PRETIMEOUT_GOV + help + Enable this if you want to use pretimeout governors with the software + watchdog. Be aware that governors might affect the watchdog because it + is purely software, e.g. the panic governor will stall it! + +config DA9052_WATCHDOG + tristate "Dialog DA9052 Watchdog" + depends on PMIC_DA9052 || COMPILE_TEST + select WATCHDOG_CORE + help + Support for the watchdog in the DA9052 PMIC. Watchdog trigger + cause system reset. + + Say Y here to include support for the DA9052 watchdog. + Alternatively say M to compile the driver as a module, + which will be called da9052_wdt. + +config DA9055_WATCHDOG + tristate "Dialog Semiconductor DA9055 Watchdog" + depends on MFD_DA9055 || COMPILE_TEST + select WATCHDOG_CORE + help + If you say yes here you get support for watchdog on the Dialog + Semiconductor DA9055 PMIC. + + This driver can also be built as a module. If so, the module + will be called da9055_wdt. + +config DA9063_WATCHDOG + tristate "Dialog DA9063 Watchdog" + depends on MFD_DA9063 || COMPILE_TEST + select WATCHDOG_CORE + help + Support for the watchdog in the DA9063 PMIC. + + This driver can be built as a module. The module name is da9063_wdt. + +config DA9062_WATCHDOG + tristate "Dialog DA9062/61 Watchdog" + depends on MFD_DA9062 || COMPILE_TEST + select WATCHDOG_CORE + help + Support for the watchdog in the DA9062 and DA9061 PMICs. + + This driver can be built as a module. The module name is da9062_wdt. + +config GPIO_WATCHDOG + tristate "Watchdog device controlled through GPIO-line" + depends on OF_GPIO + select WATCHDOG_CORE + help + If you say yes here you get support for watchdog device + controlled through GPIO-line. + +config GPIO_WATCHDOG_ARCH_INITCALL + bool "Register the watchdog as early as possible" + depends on GPIO_WATCHDOG=y + help + In some situations, the default initcall level (module_init) + in not early enough in the boot process to avoid the watchdog + to be triggered. + If you say yes here, the initcall level would be raised to + arch_initcall. + If in doubt, say N. + +config MENF21BMC_WATCHDOG + tristate "MEN 14F021P00 BMC Watchdog" + depends on MFD_MENF21BMC || COMPILE_TEST + depends on I2C + select WATCHDOG_CORE + help + Say Y here to include support for the MEN 14F021P00 BMC Watchdog. + + This driver can also be built as a module. If so the module + will be called menf21bmc_wdt. + +config MENZ069_WATCHDOG + tristate "MEN 16Z069 Watchdog" + depends on MCB + select WATCHDOG_CORE + help + Say Y here to include support for the MEN 16Z069 Watchdog. + + This driver can also be built as a module. If so the module + will be called menz069_wdt. + +config TANGOX_WATCHDOG + tristate "Sigma Designs SMP86xx/SMP87xx watchdog" + select WATCHDOG_CORE + depends on ARCH_TANGO || COMPILE_TEST + depends on HAS_IOMEM + help + Support for the watchdog in Sigma Designs SMP86xx (tango3) + and SMP87xx (tango4) family chips. + + This driver can be built as a module. The module name is tangox_wdt. + +config WDAT_WDT + tristate "ACPI Watchdog Action Table (WDAT)" + depends on ACPI + select WATCHDOG_CORE + select ACPI_WATCHDOG + help + This driver adds support for systems with ACPI Watchdog Action + Table (WDAT) table. Servers typically have this but it can be + found on some desktop machines as well. This driver will take + over the native iTCO watchdog driver found on many Intel CPUs. + + To compile this driver as module, choose M here: the module will + be called wdat_wdt. + +config WM831X_WATCHDOG + tristate "WM831x watchdog" + depends on MFD_WM831X + select WATCHDOG_CORE + help + Support for the watchdog in the WM831x AudioPlus PMICs. When + the watchdog triggers the system will be reset. + +config WM8350_WATCHDOG + tristate "WM8350 watchdog" + depends on MFD_WM8350 + select WATCHDOG_CORE + help + Support for the watchdog in the WM8350 AudioPlus PMIC. When + the watchdog triggers the system will be reset. + +config XILINX_WATCHDOG + tristate "Xilinx Watchdog timer" + depends on HAS_IOMEM + select WATCHDOG_CORE + help + Watchdog driver for the xps_timebase_wdt ip core. + + To compile this driver as a module, choose M here: the + module will be called of_xilinx_wdt. + +config ZIIRAVE_WATCHDOG + tristate "Zodiac RAVE Watchdog Timer" + depends on I2C + select WATCHDOG_CORE + help + Watchdog driver for the Zodiac Aerospace RAVE Switch Watchdog + Processor. + + To compile this driver as a module, choose M here: the + module will be called ziirave_wdt. + +config RAVE_SP_WATCHDOG + tristate "RAVE SP Watchdog timer" + depends on RAVE_SP_CORE + depends on NVMEM || !NVMEM + select WATCHDOG_CORE + help + Support for the watchdog on RAVE SP device. + +# ALPHA Architecture + +# ARM Architecture + +config ARM_SP805_WATCHDOG + tristate "ARM SP805 Watchdog" + depends on (ARM || ARM64 || COMPILE_TEST) && ARM_AMBA + select WATCHDOG_CORE + help + ARM Primecell SP805 Watchdog timer. This will reboot your system when + the timeout is reached. + +config ARM_SBSA_WATCHDOG + tristate "ARM SBSA Generic Watchdog" + depends on ARM64 + depends on ARM_ARCH_TIMER + select WATCHDOG_CORE + help + ARM SBSA Generic Watchdog has two stage timeouts: + the first signal (WS0) is for alerting the system by interrupt, + the second one (WS1) is a real hardware reset. + More details: ARM DEN0029B - Server Base System Architecture (SBSA) + + This driver can operate ARM SBSA Generic Watchdog as a single stage + or a two stages watchdog, it depends on the module parameter "action". + + Note: the maximum timeout in the two stages mode is half of that in + the single stage mode. + + To compile this driver as module, choose M here: The module + will be called sbsa_gwdt. + +config ASM9260_WATCHDOG + tristate "Alphascale ASM9260 watchdog" + depends on MACH_ASM9260 || COMPILE_TEST + depends on OF + select WATCHDOG_CORE + select RESET_CONTROLLER + help + Watchdog timer embedded into Alphascale asm9260 chips. This will reboot your + system when the timeout is reached. + +config AT91RM9200_WATCHDOG + tristate "AT91RM9200 watchdog" + depends on (SOC_AT91RM9200 && MFD_SYSCON) || COMPILE_TEST + help + Watchdog timer embedded into AT91RM9200 chips. This will reboot your + system when the timeout is reached. + +config AT91SAM9X_WATCHDOG + tristate "AT91SAM9X / AT91CAP9 watchdog" + depends on ARCH_AT91 || COMPILE_TEST + select WATCHDOG_CORE + help + Watchdog timer embedded into AT91SAM9X and AT91CAP9 chips. This will + reboot your system when the timeout is reached. + +config SAMA5D4_WATCHDOG + tristate "Atmel SAMA5D4 Watchdog Timer" + depends on ARCH_AT91 || COMPILE_TEST + select WATCHDOG_CORE + help + Atmel SAMA5D4 watchdog timer is embedded into SAMA5D4 chips. + Its Watchdog Timer Mode Register can be written more than once. + This will reboot your system when the timeout is reached. + +config CADENCE_WATCHDOG + tristate "Cadence Watchdog Timer" + depends on HAS_IOMEM + select WATCHDOG_CORE + help + Say Y here if you want to include support for the watchdog + timer in the Xilinx Zynq. + +config 21285_WATCHDOG + tristate "DC21285 watchdog" + depends on FOOTBRIDGE + help + The Intel Footbridge chip contains a built-in watchdog circuit. Say Y + here if you wish to use this. Alternatively say M to compile the + driver as a module, which will be called wdt285. + + This driver does not work on all machines. In particular, early CATS + boards have hardware problems that will cause the machine to simply + lock up if the watchdog fires. + + "If in doubt, leave it out" - say N. + +config 977_WATCHDOG + tristate "NetWinder WB83C977 watchdog" + depends on (FOOTBRIDGE && ARCH_NETWINDER) || (ARM && COMPILE_TEST) + help + Say Y here to include support for the WB977 watchdog included in + NetWinder machines. Alternatively say M to compile the driver as + a module, which will be called wdt977. + + Not sure? It's safe to say N. + +config FTWDT010_WATCHDOG + tristate "Faraday Technology FTWDT010 watchdog" + depends on ARM || COMPILE_TEST + select WATCHDOG_CORE + default ARCH_GEMINI + help + Say Y here if to include support for the Faraday Technology + FTWDT010 watchdog timer embedded in the Cortina Systems Gemini + family of devices. + + To compile this driver as a module, choose M here: the + module will be called ftwdt010_wdt. + +config IXP4XX_WATCHDOG + tristate "IXP4xx Watchdog" + depends on ARCH_IXP4XX + help + Say Y here if to include support for the watchdog timer + in the Intel IXP4xx network processors. This driver can + be built as a module by choosing M. The module will + be called ixp4xx_wdt. + + Note: The internal IXP4xx watchdog does a soft CPU reset + which doesn't reset any peripherals. There are circumstances + where the watchdog will fail to reset the board correctly + (e.g., if the boot ROM is in an unreadable state). + + Say N if you are unsure. + +config KS8695_WATCHDOG + tristate "KS8695 watchdog" + depends on ARCH_KS8695 + help + Watchdog timer embedded into KS8695 processor. This will reboot your + system when the timeout is reached. + +config HAVE_S3C2410_WATCHDOG + bool + help + This will include watchdog timer support for Samsung SoCs. If + you want to include watchdog support for any machine, kindly + select this in the respective mach-XXXX/Kconfig file. + +config S3C2410_WATCHDOG + tristate "S3C2410 Watchdog" + depends on HAVE_S3C2410_WATCHDOG || COMPILE_TEST + select WATCHDOG_CORE + select MFD_SYSCON if ARCH_EXYNOS + help + Watchdog timer block in the Samsung SoCs. This will reboot + the system when the timer expires with the watchdog enabled. + + The driver is limited by the speed of the system's PCLK + signal, so with reasonably fast systems (PCLK around 50-66MHz) + then watchdog intervals of over approximately 20seconds are + unavailable. + + The driver can be built as a module by choosing M, and will + be called s3c2410_wdt + +config SA1100_WATCHDOG + tristate "SA1100/PXA2xx watchdog" + depends on ARCH_SA1100 || ARCH_PXA + help + Watchdog timer embedded into SA11x0 and PXA2xx chips. This will + reboot your system when timeout is reached. + + NOTE: once enabled, this timer cannot be disabled. + + To compile this driver as a module, choose M here: the + module will be called sa1100_wdt. + +config DW_WATCHDOG + tristate "Synopsys DesignWare watchdog" + depends on HAS_IOMEM + select WATCHDOG_CORE + help + Say Y here if to include support for the Synopsys DesignWare + watchdog timer found in many chips. + To compile this driver as a module, choose M here: the + module will be called dw_wdt. + +config EP93XX_WATCHDOG + tristate "EP93xx Watchdog" + depends on ARCH_EP93XX || COMPILE_TEST + select WATCHDOG_CORE + help + Say Y here if to include support for the watchdog timer + embedded in the Cirrus Logic EP93xx family of devices. + + To compile this driver as a module, choose M here: the + module will be called ep93xx_wdt. + +config OMAP_WATCHDOG + tristate "OMAP Watchdog" + depends on ARCH_OMAP16XX || ARCH_OMAP2PLUS || COMPILE_TEST + select WATCHDOG_CORE + help + Support for TI OMAP1610/OMAP1710/OMAP2420/OMAP3430/OMAP4430 watchdog. Say 'Y' + here to enable the OMAP1610/OMAP1710/OMAP2420/OMAP3430/OMAP4430 watchdog timer. + +config PNX4008_WATCHDOG + tristate "LPC32XX Watchdog" + depends on ARCH_LPC32XX + select WATCHDOG_CORE + help + Say Y here if to include support for the watchdog timer + in the LPC32XX processor. + This driver can be built as a module by choosing M. The module + will be called pnx4008_wdt. + + Say N if you are unsure. + +config IOP_WATCHDOG + tristate "IOP Watchdog" + depends on ARCH_IOP13XX + select WATCHDOG_NOWAYOUT if (ARCH_IOP32X || ARCH_IOP33X) + help + Say Y here if to include support for the watchdog timer + in the Intel IOP3XX & IOP13XX I/O Processors. This driver can + be built as a module by choosing M. The module will + be called iop_wdt. + + Note: The IOP13XX watchdog does an Internal Bus Reset which will + affect both cores and the peripherals of the IOP. The ATU-X + and/or ATUe configuration registers will remain intact, but if + operating as an Root Complex and/or Central Resource, the PCI-X + and/or PCIe busses will also be reset. THIS IS A VERY BIG HAMMER. + +config DAVINCI_WATCHDOG + tristate "DaVinci watchdog" + depends on ARCH_DAVINCI || ARCH_KEYSTONE || COMPILE_TEST + select WATCHDOG_CORE + help + Say Y here if to include support for the watchdog timer + in the DaVinci DM644x/DM646x or Keystone processors. + To compile this driver as a module, choose M here: the + module will be called davinci_wdt. + + NOTE: once enabled, this timer cannot be disabled. + Say N if you are unsure. + +config ORION_WATCHDOG + tristate "Orion watchdog" + depends on ARCH_ORION5X || ARCH_DOVE || MACH_DOVE || ARCH_MVEBU || (COMPILE_TEST && !ARCH_EBSA110) + depends on ARM + select WATCHDOG_CORE + help + Say Y here if to include support for the watchdog timer + in the Marvell Orion5x and Kirkwood ARM SoCs. + To compile this driver as a module, choose M here: the + module will be called orion_wdt. + +config RN5T618_WATCHDOG + tristate "Ricoh RN5T618 watchdog" + depends on MFD_RN5T618 || COMPILE_TEST + select WATCHDOG_CORE + help + If you say yes here you get support for watchdog on the Ricoh + RN5T618 PMIC. + + This driver can also be built as a module. If so, the module + will be called rn5t618_wdt. + +config SUNXI_WATCHDOG + tristate "Allwinner SoCs watchdog support" + depends on ARCH_SUNXI || COMPILE_TEST + select WATCHDOG_CORE + help + Say Y here to include support for the watchdog timer + in Allwinner SoCs. + To compile this driver as a module, choose M here: the + module will be called sunxi_wdt. + +config COH901327_WATCHDOG + bool "ST-Ericsson COH 901 327 watchdog" + depends on ARCH_U300 || (ARM && COMMON_CLK && COMPILE_TEST) + default y if MACH_U300 + select WATCHDOG_CORE + help + Say Y here to include Watchdog timer support for the + watchdog embedded into the ST-Ericsson U300 series platforms. + This watchdog is used to reset the system and thus cannot be + compiled as a module. + +config NPCM7XX_WATCHDOG + bool "Nuvoton NPCM750 watchdog" + depends on ARCH_NPCM || COMPILE_TEST + default y if ARCH_NPCM750 + select WATCHDOG_CORE + help + Say Y here to include Watchdog timer support for the + watchdog embedded into the NPCM7xx. + This watchdog is used to reset the system and thus cannot be + compiled as a module. + +config TWL4030_WATCHDOG + tristate "TWL4030 Watchdog" + depends on TWL4030_CORE + select WATCHDOG_CORE + help + Support for TI TWL4030 watchdog. Say 'Y' here to enable the + watchdog timer support for TWL4030 chips. + +config STMP3XXX_RTC_WATCHDOG + tristate "Freescale STMP3XXX & i.MX23/28 watchdog" + depends on RTC_DRV_STMP || COMPILE_TEST + select WATCHDOG_CORE + help + Say Y here to include support for the watchdog timer inside + the RTC for the STMP37XX/378X or i.MX23/28 SoC. + To compile this driver as a module, choose M here: the + module will be called stmp3xxx_rtc_wdt. + +config NUC900_WATCHDOG + tristate "Nuvoton NUC900 watchdog" + depends on ARCH_W90X900 || COMPILE_TEST + help + Say Y here if to include support for the watchdog timer + for the Nuvoton NUC900 series SoCs. + To compile this driver as a module, choose M here: the + module will be called nuc900_wdt. + +config TS4800_WATCHDOG + tristate "TS-4800 Watchdog" + depends on HAS_IOMEM && OF + depends on SOC_IMX51 || COMPILE_TEST + select WATCHDOG_CORE + select MFD_SYSCON + help + Technologic Systems TS-4800 has watchdog timer implemented in + an external FPGA. Say Y here if you want to support for the + watchdog timer on TS-4800 board. + +config TS72XX_WATCHDOG + tristate "TS-72XX SBC Watchdog" + depends on MACH_TS72XX || COMPILE_TEST + help + Technologic Systems TS-7200, TS-7250 and TS-7260 boards have + watchdog timer implemented in a external CPLD chip. Say Y here + if you want to support for the watchdog timer on TS-72XX boards. + + To compile this driver as a module, choose M here: the + module will be called ts72xx_wdt. + +config MAX63XX_WATCHDOG + tristate "Max63xx watchdog" + depends on HAS_IOMEM + select WATCHDOG_CORE + help + Support for memory mapped max63{69,70,71,72,73,74} watchdog timer. + +config MAX77620_WATCHDOG + tristate "Maxim Max77620 Watchdog Timer" + depends on MFD_MAX77620 || COMPILE_TEST + select WATCHDOG_CORE + help + This is the driver for the Max77620 watchdog timer. + Say 'Y' here to enable the watchdog timer support for + MAX77620 chips. To compile this driver as a module, + choose M here: the module will be called max77620_wdt. + +config IMX2_WDT + tristate "IMX2+ Watchdog" + depends on ARCH_MXC || ARCH_LAYERSCAPE || COMPILE_TEST + select REGMAP_MMIO + select WATCHDOG_CORE + help + This is the driver for the hardware watchdog + on the Freescale IMX2 and later processors. + If you have one of these processors and wish to have + watchdog support enabled, say Y, otherwise say N. + + To compile this driver as a module, choose M here: the + module will be called imx2_wdt. + +config UX500_WATCHDOG + tristate "ST-Ericsson Ux500 watchdog" + depends on MFD_DB8500_PRCMU + select WATCHDOG_CORE + default y + help + Say Y here to include Watchdog timer support for the watchdog + existing in the prcmu of ST-Ericsson Ux500 series platforms. + + To compile this driver as a module, choose M here: the + module will be called ux500_wdt. + +config RETU_WATCHDOG + tristate "Retu watchdog" + depends on MFD_RETU + select WATCHDOG_CORE + help + Retu watchdog driver for Nokia Internet Tablets (770, N800, + N810). At least on N800 the watchdog cannot be disabled, so + this driver is essential and you should enable it. + + To compile this driver as a module, choose M here: the + module will be called retu_wdt. + +config MOXART_WDT + tristate "MOXART watchdog" + depends on ARCH_MOXART || COMPILE_TEST + help + Say Y here to include Watchdog timer support for the watchdog + existing on the MOXA ART SoC series platforms. + + To compile this driver as a module, choose M here: the + module will be called moxart_wdt. + +config SIRFSOC_WATCHDOG + tristate "SiRFSOC watchdog" + depends on HAS_IOMEM + depends on ARCH_SIRF || COMPILE_TEST + select WATCHDOG_CORE + default y + help + Support for CSR SiRFprimaII and SiRFatlasVI watchdog. When + the watchdog triggers the system will be reset. + +config ST_LPC_WATCHDOG + tristate "STMicroelectronics LPC Watchdog" + depends on ARCH_STI || COMPILE_TEST + depends on OF + select WATCHDOG_CORE + help + Say Y here to include STMicroelectronics Low Power Controller + (LPC) based Watchdog timer support. + + To compile this driver as a module, choose M here: the + module will be called st_lpc_wdt. + +config TEGRA_WATCHDOG + tristate "Tegra watchdog" + depends on (ARCH_TEGRA || COMPILE_TEST) && HAS_IOMEM + select WATCHDOG_CORE + help + Say Y here to include support for the watchdog timer + embedded in NVIDIA Tegra SoCs. + + To compile this driver as a module, choose M here: the + module will be called tegra_wdt. + +config QCOM_WDT + tristate "QCOM watchdog" + depends on HAS_IOMEM + depends on ARCH_QCOM || COMPILE_TEST + select WATCHDOG_CORE + help + Say Y here to include Watchdog timer support for the watchdog found + on QCOM chipsets. Currently supported targets are the MSM8960, + APQ8064, and IPQ8064. + + To compile this driver as a module, choose M here: the + module will be called qcom_wdt. + +config MESON_GXBB_WATCHDOG + tristate "Amlogic Meson GXBB SoCs watchdog support" + depends on ARCH_MESON || COMPILE_TEST + select WATCHDOG_CORE + help + Say Y here to include support for the watchdog timer + in Amlogic Meson GXBB SoCs. + To compile this driver as a module, choose M here: the + module will be called meson_gxbb_wdt. + +config MESON_WATCHDOG + tristate "Amlogic Meson SoCs watchdog support" + depends on ARCH_MESON || COMPILE_TEST + select WATCHDOG_CORE + help + Say Y here to include support for the watchdog timer + in Amlogic Meson SoCs. + To compile this driver as a module, choose M here: the + module will be called meson_wdt. + +config MEDIATEK_WATCHDOG + tristate "Mediatek SoCs watchdog support" + depends on ARCH_MEDIATEK || COMPILE_TEST + select WATCHDOG_CORE + help + Say Y here to include support for the watchdog timer + in Mediatek SoCs. + To compile this driver as a module, choose M here: the + module will be called mtk_wdt. + +config DIGICOLOR_WATCHDOG + tristate "Conexant Digicolor SoCs watchdog support" + depends on ARCH_DIGICOLOR || COMPILE_TEST + select WATCHDOG_CORE + help + Say Y here to include support for the watchdog timer + in Conexant Digicolor SoCs. + To compile this driver as a module, choose M here: the + module will be called digicolor_wdt. + +config LPC18XX_WATCHDOG + tristate "LPC18xx/43xx Watchdog" + depends on ARCH_LPC18XX || COMPILE_TEST + depends on HAS_IOMEM + select WATCHDOG_CORE + help + Say Y here if to include support for the watchdog timer + in NXP LPC SoCs family, which includes LPC18xx/LPC43xx + processors. + To compile this driver as a module, choose M here: the + module will be called lpc18xx_wdt. + +config ATLAS7_WATCHDOG + tristate "CSRatlas7 watchdog" + depends on ARCH_ATLAS7 || COMPILE_TEST + help + Say Y here to include Watchdog timer support for the watchdog + existing on the CSRatlas7 series platforms. + + To compile this driver as a module, choose M here: the + module will be called atlas7_wdt. + +config RENESAS_WDT + tristate "Renesas WDT Watchdog" + depends on ARCH_RENESAS || COMPILE_TEST + select WATCHDOG_CORE + help + This driver adds watchdog support for the integrated watchdogs in the + Renesas R-Car and other SH-Mobile SoCs (usually named RWDT or SWDT). + +config RENESAS_RZAWDT + tristate "Renesas RZ/A WDT Watchdog" + depends on ARCH_RENESAS || COMPILE_TEST + select WATCHDOG_CORE + help + This driver adds watchdog support for the integrated watchdogs in the + Renesas RZ/A SoCs. These watchdogs can be used to reset a system. + +config ASPEED_WATCHDOG + tristate "Aspeed BMC watchdog support" + depends on ARCH_ASPEED || COMPILE_TEST + select WATCHDOG_CORE + help + Say Y here to include support for the watchdog timer + in Aspeed BMC SoCs. + + This driver is required to reboot the SoC. + + To compile this driver as a module, choose M here: the + module will be called aspeed_wdt. + +config ZX2967_WATCHDOG + tristate "ZTE zx2967 SoCs watchdog support" + depends on ARCH_ZX + select WATCHDOG_CORE + help + Say Y here to include support for the watchdog timer + in ZTE zx2967 SoCs. + To compile this driver as a module, choose M here: the + module will be called zx2967_wdt. + +config STM32_WATCHDOG + tristate "STM32 Independent WatchDoG (IWDG) support" + depends on ARCH_STM32 + select WATCHDOG_CORE + default y + help + Say Y here to include support for the watchdog timer + in stm32 SoCs. + + To compile this driver as a module, choose M here: the + module will be called stm32_iwdg. + +config UNIPHIER_WATCHDOG + tristate "UniPhier watchdog support" + depends on ARCH_UNIPHIER || COMPILE_TEST + depends on OF && MFD_SYSCON + select WATCHDOG_CORE + help + Say Y here to include support watchdog timer embedded + into the UniPhier system. + + To compile this driver as a module, choose M here: the + module will be called uniphier_wdt. + +config RTD119X_WATCHDOG + bool "Realtek RTD119x/RTD129x watchdog support" + depends on ARCH_REALTEK || COMPILE_TEST + depends on OF + select WATCHDOG_CORE + default ARCH_REALTEK + help + Say Y here to include support for the watchdog timer in + Realtek RTD1295 SoCs. + +config SPRD_WATCHDOG + tristate "Spreadtrum watchdog support" + depends on ARCH_SPRD || COMPILE_TEST + select WATCHDOG_CORE + help + Say Y here to include watchdog timer supported + by Spreadtrum system. + +# X86 (i386 + ia64 + x86_64) Architecture + +config ACQUIRE_WDT + tristate "Acquire SBC Watchdog Timer" + depends on X86 + ---help--- + This is the driver for the hardware watchdog on Single Board + Computers produced by Acquire Inc (and others). This watchdog + simply watches your kernel to make sure it doesn't freeze, and if + it does, it reboots your computer after a certain amount of time. + + To compile this driver as a module, choose M here: the + module will be called acquirewdt. + + Most people will say N. + +config ADVANTECH_WDT + tristate "Advantech SBC Watchdog Timer" + depends on X86 + help + If you are configuring a Linux kernel for the Advantech single-board + computer, say `Y' here to support its built-in watchdog timer + feature. More information can be found at + <http://www.advantech.com.tw/products/> + +config ALIM1535_WDT + tristate "ALi M1535 PMU Watchdog Timer" + depends on X86 && PCI + ---help--- + This is the driver for the hardware watchdog on the ALi M1535 PMU. + + To compile this driver as a module, choose M here: the + module will be called alim1535_wdt. + + Most people will say N. + +config ALIM7101_WDT + tristate "ALi M7101 PMU Computer Watchdog" + depends on PCI + help + This is the driver for the hardware watchdog on the ALi M7101 PMU + as used in the x86 Cobalt servers and also found in some + SPARC Netra servers too. + + To compile this driver as a module, choose M here: the + module will be called alim7101_wdt. + + Most people will say N. + +config EBC_C384_WDT + tristate "WinSystems EBC-C384 Watchdog Timer" + depends on X86 + select ISA_BUS_API + select WATCHDOG_CORE + help + Enables watchdog timer support for the watchdog timer on the + WinSystems EBC-C384 motherboard. The timeout may be configured via + the timeout module parameter. + +config F71808E_WDT + tristate "Fintek F718xx, F818xx Super I/O Watchdog" + depends on X86 + help + This is the driver for the hardware watchdog on the Fintek F71808E, + F71862FG, F71868, F71869, F71882FG, F71889FG, F81865 and F81866 + Super I/O controllers. + + You can compile this driver directly into the kernel, or use + it as a module. The module will be called f71808e_wdt. + +config SP5100_TCO + tristate "AMD/ATI SP5100 TCO Timer/Watchdog" + depends on X86 && PCI + select WATCHDOG_CORE + ---help--- + Hardware watchdog driver for the AMD/ATI SP5100 chipset. The TCO + (Total Cost of Ownership) timer is a watchdog timer that will reboot + the machine after its expiration. The expiration time can be + configured with the "heartbeat" parameter. + + To compile this driver as a module, choose M here: the + module will be called sp5100_tco. + +config GEODE_WDT + tristate "AMD Geode CS5535/CS5536 Watchdog" + depends on CS5535_MFGPT + help + This driver enables a watchdog capability built into the + CS5535/CS5536 companion chips for the AMD Geode GX and LX + processors. This watchdog watches your kernel to make sure + it doesn't freeze, and if it does, it reboots your computer after + a certain amount of time. + + You can compile this driver directly into the kernel, or use + it as a module. The module will be called geodewdt. + +config SC520_WDT + tristate "AMD Elan SC520 processor Watchdog" + depends on MELAN || COMPILE_TEST + help + This is the driver for the hardware watchdog built in to the + AMD "Elan" SC520 microcomputer commonly used in embedded systems. + This watchdog simply watches your kernel to make sure it doesn't + freeze, and if it does, it reboots your computer after a certain + amount of time. + + You can compile this driver directly into the kernel, or use + it as a module. The module will be called sc520_wdt. + +config SBC_FITPC2_WATCHDOG + tristate "Compulab SBC-FITPC2 watchdog" + depends on X86 + ---help--- + This is the driver for the built-in watchdog timer on the fit-PC2, + fit-PC2i, CM-iAM single-board computers made by Compulab. + + It`s possible to enable watchdog timer either from BIOS (F2) or from booted Linux. + When "Watchdog Timer Value" enabled one can set 31-255 s operational range. + + Entering BIOS setup temporary disables watchdog operation regardless to current state, + so system will not be restarted while user in BIOS setup. + + Once watchdog was enabled the system will be restarted every + "Watchdog Timer Value" period, so to prevent it user can restart or + disable the watchdog. + + To compile this driver as a module, choose M here: the + module will be called sbc_fitpc2_wdt. + + Most people will say N. + +config EUROTECH_WDT + tristate "Eurotech CPU-1220/1410 Watchdog Timer" + depends on X86 + help + Enable support for the watchdog timer on the Eurotech CPU-1220 and + CPU-1410 cards. These are PC/104 SBCs. Spec sheets and product + information are at <http://www.eurotech.it/>. + +config IB700_WDT + tristate "IB700 SBC Watchdog Timer" + depends on X86 + ---help--- + This is the driver for the hardware watchdog on the IB700 Single + Board Computer produced by TMC Technology (www.tmc-uk.com). This watchdog + simply watches your kernel to make sure it doesn't freeze, and if + it does, it reboots your computer after a certain amount of time. + + This driver is like the WDT501 driver but for slightly different hardware. + + To compile this driver as a module, choose M here: the + module will be called ib700wdt. + + Most people will say N. + +config IBMASR + tristate "IBM Automatic Server Restart" + depends on X86 + help + This is the driver for the IBM Automatic Server Restart watchdog + timer built-in into some eServer xSeries machines. + + To compile this driver as a module, choose M here: the + module will be called ibmasr. + +config WAFER_WDT + tristate "ICP Single Board Computer Watchdog Timer" + depends on X86 + help + This is a driver for the hardware watchdog on the ICP Single + Board Computer. This driver is working on (at least) the following + IPC SBC's: Wafer 5823, Rocky 4783, Rocky 3703 and Rocky 3782. + + To compile this driver as a module, choose M here: the + module will be called wafer5823wdt. + +config I6300ESB_WDT + tristate "Intel 6300ESB Timer/Watchdog" + depends on PCI + select WATCHDOG_CORE + ---help--- + Hardware driver for the watchdog timer built into the Intel + 6300ESB controller hub. + + To compile this driver as a module, choose M here: the + module will be called i6300esb. + +config IE6XX_WDT + tristate "Intel Atom E6xx Watchdog" + depends on X86 && PCI + select WATCHDOG_CORE + select MFD_CORE + select LPC_SCH + ---help--- + Hardware driver for the watchdog timer built into the Intel + Atom E6XX (TunnelCreek) processor. + + To compile this driver as a module, choose M here: the + module will be called ie6xx_wdt. + +config INTEL_SCU_WATCHDOG + bool "Intel SCU Watchdog for Mobile Platforms" + depends on X86_INTEL_MID + ---help--- + Hardware driver for the watchdog time built into the Intel SCU + for Intel Mobile Platforms. + + To compile this driver as a module, choose M here. + +config INTEL_MID_WATCHDOG + tristate "Intel MID Watchdog Timer" + depends on X86_INTEL_MID + select WATCHDOG_CORE + ---help--- + Watchdog timer driver built into the Intel SCU for Intel MID + Platforms. + + This driver currently supports only the watchdog evolution + implementation in SCU, available for Merrifield generation. + + To compile this driver as a module, choose M here. + +config ITCO_WDT + tristate "Intel TCO Timer/Watchdog" + depends on (X86 || IA64) && PCI + select WATCHDOG_CORE + depends on I2C || I2C=n + select LPC_ICH if !EXPERT + select I2C_I801 if !EXPERT && I2C + ---help--- + Hardware driver for the intel TCO timer based watchdog devices. + These drivers are included in the Intel 82801 I/O Controller + Hub family (from ICH0 up to ICH10) and in the Intel 63xxESB + controller hub. + + The TCO (Total Cost of Ownership) timer is a watchdog timer + that will reboot the machine after its second expiration. The + expiration time can be configured with the "heartbeat" parameter. + + On some motherboards the driver may fail to reset the chipset's + NO_REBOOT flag which prevents the watchdog from rebooting the + machine. If this is the case you will get a kernel message like + "failed to reset NO_REBOOT flag, reboot disabled by hardware". + + To compile this driver as a module, choose M here: the + module will be called iTCO_wdt. + +config ITCO_VENDOR_SUPPORT + bool "Intel TCO Timer/Watchdog Specific Vendor Support" + depends on ITCO_WDT + ---help--- + Add vendor specific support to the intel TCO timer based watchdog + devices. At this moment we only have additional support for some + SuperMicro Inc. motherboards. + +config IT8712F_WDT + tristate "IT8712F (Smart Guardian) Watchdog Timer" + depends on X86 + ---help--- + This is the driver for the built-in watchdog timer on the IT8712F + Super I/0 chipset used on many motherboards. + + If the driver does not work, then make sure that the game port in + the BIOS is enabled. + + To compile this driver as a module, choose M here: the + module will be called it8712f_wdt. + +config IT87_WDT + tristate "IT87 Watchdog Timer" + depends on X86 + select WATCHDOG_CORE + ---help--- + This is the driver for the hardware watchdog on the ITE IT8607, + IT8620, IT8622, IT8625, IT8628, IT8655, IT8665, IT8686, IT8702, + IT8712, IT8716, IT8718, IT8720, IT8721, IT8726, IT8728, and + IT8783 Super I/O chips. + + This watchdog simply watches your kernel to make sure it doesn't + freeze, and if it does, it reboots your computer after a certain + amount of time. + + To compile this driver as a module, choose M here: the module will + be called it87_wdt. + +config HP_WATCHDOG + tristate "HP ProLiant iLO2+ Hardware Watchdog Timer" + select WATCHDOG_CORE + depends on X86 && PCI + help + A software monitoring watchdog and NMI sourcing driver. This driver + will detect lockups and provide a stack trace. This is a driver that + will only load on an HP ProLiant system with a minimum of iLO2 support. + To compile this driver as a module, choose M here: the module will be + called hpwdt. + +config KEMPLD_WDT + tristate "Kontron COM Watchdog Timer" + depends on MFD_KEMPLD + select WATCHDOG_CORE + help + Support for the PLD watchdog on some Kontron ETX and COMexpress + (ETXexpress) modules + + This driver can also be built as a module. If so, the module will be + called kempld_wdt. + +config HPWDT_NMI_DECODING + bool "NMI decoding support for the HP ProLiant iLO2+ Hardware Watchdog Timer" + depends on HP_WATCHDOG + default y + help + When an NMI occurs this feature will make the necessary BIOS calls to + log the cause of the NMI. + +config SC1200_WDT + tristate "National Semiconductor PC87307/PC97307 (ala SC1200) Watchdog" + depends on X86 + help + This is a driver for National Semiconductor PC87307/PC97307 hardware + watchdog cards as found on the SC1200. This watchdog is mainly used + for power management purposes and can be used to power down the device + during inactivity periods (includes interrupt activity monitoring). + + To compile this driver as a module, choose M here: the + module will be called sc1200wdt. + + Most people will say N. + +config SCx200_WDT + tristate "National Semiconductor SCx200 Watchdog" + depends on SCx200 && PCI + help + Enable the built-in watchdog timer support on the National + Semiconductor SCx200 processors. + + If compiled as a module, it will be called scx200_wdt. + +config PC87413_WDT + tristate "NS PC87413 watchdog" + depends on X86 + ---help--- + This is the driver for the hardware watchdog on the PC87413 chipset + This watchdog simply watches your kernel to make sure it doesn't + freeze, and if it does, it reboots your computer after a certain + amount of time. + + To compile this driver as a module, choose M here: the + module will be called pc87413_wdt. + + Most people will say N. + +config NV_TCO + tristate "nVidia TCO Timer/Watchdog" + depends on X86 && PCI + ---help--- + Hardware driver for the TCO timer built into the nVidia Hub family + (such as the MCP51). The TCO (Total Cost of Ownership) timer is a + watchdog timer that will reboot the machine after its second + expiration. The expiration time can be configured with the + "heartbeat" parameter. + + On some motherboards the driver may fail to reset the chipset's + NO_REBOOT flag which prevents the watchdog from rebooting the + machine. If this is the case you will get a kernel message like + "failed to reset NO_REBOOT flag, reboot disabled by hardware". + + To compile this driver as a module, choose M here: the + module will be called nv_tco. + +config RDC321X_WDT + tristate "RDC R-321x SoC watchdog" + depends on X86_RDC321X || COMPILE_TEST + depends on PCI + help + This is the driver for the built in hardware watchdog + in the RDC R-321x SoC. + + To compile this driver as a module, choose M here: the + module will be called rdc321x_wdt. + +config 60XX_WDT + tristate "SBC-60XX Watchdog Timer" + depends on X86 + help + This driver can be used with the watchdog timer found on some + single board computers, namely the 6010 PII based computer. + It may well work with other cards. It reads port 0x443 to enable + and re-set the watchdog timer, and reads port 0x45 to disable + the watchdog. If you have a card that behave in similar ways, + you can probably make this driver work with your card as well. + + You can compile this driver directly into the kernel, or use + it as a module. The module will be called sbc60xxwdt. + +config SBC8360_WDT + tristate "SBC8360 Watchdog Timer" + depends on X86_32 + ---help--- + + This is the driver for the hardware watchdog on the SBC8360 Single + Board Computer produced by Axiomtek Co., Ltd. (www.axiomtek.com). + + To compile this driver as a module, choose M here: the + module will be called sbc8360. + + Most people will say N. + +config SBC7240_WDT + tristate "SBC Nano 7240 Watchdog Timer" + depends on X86_32 && !UML + ---help--- + This is the driver for the hardware watchdog found on the IEI + single board computers EPIC Nano 7240 (and likely others). This + watchdog simply watches your kernel to make sure it doesn't freeze, + and if it does, it reboots your computer after a certain amount of + time. + + To compile this driver as a module, choose M here: the + module will be called sbc7240_wdt. + +config CPU5_WDT + tristate "SMA CPU5 Watchdog" + depends on X86 + ---help--- + TBD. + To compile this driver as a module, choose M here: the + module will be called cpu5wdt. + +config SMSC_SCH311X_WDT + tristate "SMSC SCH311X Watchdog Timer" + depends on X86 + ---help--- + This is the driver for the hardware watchdog timer on the + SMSC SCH3112, SCH3114 and SCH3116 Super IO chipset + (LPC IO with 8042 KBC, Reset Generation, HWM and multiple + serial ports). + + To compile this driver as a module, choose M here: the + module will be called sch311x_wdt. + +config SMSC37B787_WDT + tristate "Winbond SMsC37B787 Watchdog Timer" + depends on X86 + ---help--- + This is the driver for the hardware watchdog component on the + Winbond SMsC37B787 chipset as used on the NetRunner Mainboard + from Vision Systems and maybe others. + + This watchdog simply watches your kernel to make sure it doesn't + freeze, and if it does, it reboots your computer after a certain + amount of time. + + Usually a userspace daemon will notify the kernel WDT driver that + userspace is still alive, at regular intervals. + + To compile this driver as a module, choose M here: the + module will be called smsc37b787_wdt. + + Most people will say N. + +config VIA_WDT + tristate "VIA Watchdog Timer" + depends on X86 && PCI + select WATCHDOG_CORE + ---help--- + This is the driver for the hardware watchdog timer on VIA + southbridge chipset CX700, VX800/VX820 or VX855/VX875. + + To compile this driver as a module, choose M here; the module + will be called via_wdt. + + Most people will say N. + +config W83627HF_WDT + tristate "Watchdog timer for W83627HF/W83627DHG and compatibles" + depends on X86 + select WATCHDOG_CORE + ---help--- + This is the driver for the hardware watchdog on the following + Super I/O chips. + W83627DHG/DHG-P/EHF/EHG/F/G/HF/S/SF/THF/UHG/UG + W83637HF + W83667HG/HG-B + W83687THF + W83697HF + W83697UG + NCT6775 + NCT6776 + NCT6779 + NCT6791 + NCT6792 + NCT6102D/04D/06D + + This watchdog simply watches your kernel to make sure it doesn't + freeze, and if it does, it reboots your computer after a certain + amount of time. + + To compile this driver as a module, choose M here: the + module will be called w83627hf_wdt. + + Most people will say N. + +config W83877F_WDT + tristate "W83877F (EMACS) Watchdog Timer" + depends on X86 + ---help--- + This is the driver for the hardware watchdog on the W83877F chipset + as used in EMACS PC-104 motherboards (and likely others). This + watchdog simply watches your kernel to make sure it doesn't freeze, + and if it does, it reboots your computer after a certain amount of + time. + + To compile this driver as a module, choose M here: the + module will be called w83877f_wdt. + + Most people will say N. + +config W83977F_WDT + tristate "W83977F (PCM-5335) Watchdog Timer" + depends on X86 + ---help--- + This is the driver for the hardware watchdog on the W83977F I/O chip + as used in AAEON's PCM-5335 SBC (and likely others). This + watchdog simply watches your kernel to make sure it doesn't freeze, + and if it does, it reboots your computer after a certain amount of + time. + + To compile this driver as a module, choose M here: the + module will be called w83977f_wdt. + +config MACHZ_WDT + tristate "ZF MachZ Watchdog" + depends on X86 + ---help--- + If you are using a ZF Micro MachZ processor, say Y here, otherwise + N. This is the driver for the watchdog timer built-in on that + processor using ZF-Logic interface. This watchdog simply watches + your kernel to make sure it doesn't freeze, and if it does, it + reboots your computer after a certain amount of time. + + To compile this driver as a module, choose M here: the + module will be called machzwd. + +config SBC_EPX_C3_WATCHDOG + tristate "Winsystems SBC EPX-C3 watchdog" + depends on X86 + ---help--- + This is the driver for the built-in watchdog timer on the EPX-C3 + Single-board computer made by Winsystems, Inc. + + *Note*: This hardware watchdog is not probeable and thus there + is no way to know if writing to its IO address will corrupt + your system or have any real effect. The only way to be sure + that this driver does what you want is to make sure you + are running it on an EPX-C3 from Winsystems with the watchdog + timer at IO address 0x1ee and 0x1ef. It will write to both those + IO ports. Basically, the assumption is made that if you compile + this driver into your kernel and/or load it as a module, that you + know what you are doing and that you are in fact running on an + EPX-C3 board! + + To compile this driver as a module, choose M here: the + module will be called sbc_epx_c3. + +config INTEL_MEI_WDT + tristate "Intel MEI iAMT Watchdog" + depends on INTEL_MEI && X86 + select WATCHDOG_CORE + ---help--- + A device driver for the Intel MEI iAMT watchdog. + + The Intel AMT Watchdog is an OS Health (Hang/Crash) watchdog. + Whenever the OS hangs or crashes, iAMT will send an event + to any subscriber to this event. The watchdog doesn't reset the + the platform. + + To compile this driver as a module, choose M here: + the module will be called mei_wdt. + +config NI903X_WDT + tristate "NI 903x/913x Watchdog" + depends on X86 && ACPI + select WATCHDOG_CORE + ---help--- + This is the driver for the watchdog timer on the National Instruments + 903x/913x real-time controllers. + + To compile this driver as a module, choose M here: the module will be + called ni903x_wdt. + +config NIC7018_WDT + tristate "NIC7018 Watchdog" + depends on X86 && ACPI + select WATCHDOG_CORE + ---help--- + Support for National Instruments NIC7018 Watchdog. + + To compile this driver as a module, choose M here: the module will be + called nic7018_wdt. + +# M68K Architecture + +config M54xx_WATCHDOG + tristate "MCF54xx watchdog support" + depends on M548x + help + To compile this driver as a module, choose M here: the + module will be called m54xx_wdt. + +# MicroBlaze Architecture + +# MIPS Architecture + +config ATH79_WDT + tristate "Atheros AR71XX/AR724X/AR913X hardware watchdog" + depends on ATH79 || (ARM && COMPILE_TEST) + help + Hardware driver for the built-in watchdog timer on the Atheros + AR71XX/AR724X/AR913X SoCs. + +config BCM47XX_WDT + tristate "Broadcom BCM47xx Watchdog Timer" + depends on BCM47XX || ARCH_BCM_5301X || COMPILE_TEST + select WATCHDOG_CORE + help + Hardware driver for the Broadcom BCM47xx Watchdog Timer. + +config RC32434_WDT + tristate "IDT RC32434 SoC Watchdog Timer" + depends on MIKROTIK_RB532 + help + Hardware driver for the IDT RC32434 SoC built-in + watchdog timer. + + To compile this driver as a module, choose M here: the + module will be called rc32434_wdt. + +config INDYDOG + tristate "Indy/I2 Hardware Watchdog" + depends on SGI_HAS_INDYDOG + help + Hardware driver for the Indy's/I2's watchdog. This is a + watchdog timer that will reboot the machine after a 60 second + timer expired and no process has written to /dev/watchdog during + that time. + +config JZ4740_WDT + tristate "Ingenic jz4740 SoC hardware watchdog" + depends on MACH_JZ4740 || MACH_JZ4780 + select WATCHDOG_CORE + help + Hardware driver for the built-in watchdog timer on Ingenic jz4740 SoCs. + +config WDT_MTX1 + tristate "MTX-1 Hardware Watchdog" + depends on MIPS_MTX1 || (MIPS && COMPILE_TEST) + help + Hardware driver for the MTX-1 boards. This is a watchdog timer that + will reboot the machine after a 100 seconds timer expired. + +config PNX833X_WDT + tristate "PNX833x Hardware Watchdog" + depends on SOC_PNX8335 + depends on BROKEN + help + Hardware driver for the PNX833x's watchdog. This is a + watchdog timer that will reboot the machine after a programmable + timer has expired and no process has written to /dev/watchdog during + that time. + +config SIBYTE_WDOG + tristate "Sibyte SoC hardware watchdog" + depends on CPU_SB1 || (MIPS && COMPILE_TEST) + help + Watchdog driver for the built in watchdog hardware in Sibyte + SoC processors. There are apparently two watchdog timers + on such processors; this driver supports only the first one, + because currently Linux only supports exporting one watchdog + to userspace. + + To compile this driver as a loadable module, choose M here. + The module will be called sb_wdog. + +config AR7_WDT + tristate "TI AR7 Watchdog Timer" + depends on AR7 || (MIPS && 32BIT && COMPILE_TEST) + help + Hardware driver for the TI AR7 Watchdog Timer. + +config TXX9_WDT + tristate "Toshiba TXx9 Watchdog Timer" + depends on CPU_TX39XX || CPU_TX49XX || (MIPS && COMPILE_TEST) + select WATCHDOG_CORE + help + Hardware driver for the built-in watchdog timer on TXx9 MIPS SoCs. + +config OCTEON_WDT + tristate "Cavium OCTEON SOC family Watchdog Timer" + depends on CAVIUM_OCTEON_SOC + default y + select WATCHDOG_CORE + select EXPORT_UASM if OCTEON_WDT = m + help + Hardware driver for OCTEON's on chip watchdog timer. + Enables the watchdog for all cores running Linux. It + installs a NMI handler and pokes the watchdog based on an + interrupt. On first expiration of the watchdog, the + interrupt handler pokes it. The second expiration causes an + NMI that prints a message. The third expiration causes a + global soft reset. + + When userspace has /dev/watchdog open, no poking is done + from the first interrupt, it is then only poked when the + device is written. + +config BCM63XX_WDT + tristate "Broadcom BCM63xx hardware watchdog" + depends on BCM63XX + help + Watchdog driver for the built in watchdog hardware in Broadcom + BCM63xx SoC. + + To compile this driver as a loadable module, choose M here. + The module will be called bcm63xx_wdt. + +config BCM2835_WDT + tristate "Broadcom BCM2835 hardware watchdog" + depends on ARCH_BCM2835 || (OF && COMPILE_TEST) + select WATCHDOG_CORE + help + Watchdog driver for the built in watchdog hardware in Broadcom + BCM2835 SoC. + + To compile this driver as a loadable module, choose M here. + The module will be called bcm2835_wdt. + +config BCM_KONA_WDT + tristate "BCM Kona Watchdog" + depends on ARCH_BCM_MOBILE || COMPILE_TEST + select WATCHDOG_CORE + help + Support for the watchdog timer on the following Broadcom BCM281xx + family, which includes BCM11130, BCM11140, BCM11351, BCM28145 and + BCM28155 variants. + + Say 'Y' or 'M' here to enable the driver. The module will be called + bcm_kona_wdt. + +config BCM_KONA_WDT_DEBUG + bool "DEBUGFS support for BCM Kona Watchdog" + depends on BCM_KONA_WDT || COMPILE_TEST + help + If enabled, adds /sys/kernel/debug/bcm_kona_wdt/info which provides + access to the driver's internal data structures as well as watchdog + timer hardware registres. + + If in doubt, say 'N'. + +config BCM7038_WDT + tristate "BCM7038 Watchdog" + select WATCHDOG_CORE + depends on HAS_IOMEM + depends on ARCH_BRCMSTB || BMIPS_GENERIC || COMPILE_TEST + help + Watchdog driver for the built-in hardware in Broadcom 7038 and + later SoCs used in set-top boxes. BCM7038 was made public + during the 2004 CES, and since then, many Broadcom chips use this + watchdog block, including some cable modem chips. + +config IMGPDC_WDT + tristate "Imagination Technologies PDC Watchdog Timer" + depends on HAS_IOMEM + depends on MIPS || COMPILE_TEST + select WATCHDOG_CORE + help + Driver for Imagination Technologies PowerDown Controller + Watchdog Timer. + + To compile this driver as a loadable module, choose M here. + The module will be called imgpdc_wdt. + +config LANTIQ_WDT + tristate "Lantiq SoC watchdog" + depends on LANTIQ + help + Hardware driver for the Lantiq SoC Watchdog Timer. + +config LOONGSON1_WDT + tristate "Loongson1 SoC hardware watchdog" + depends on MACH_LOONGSON32 + select WATCHDOG_CORE + help + Hardware driver for the Loongson1 SoC Watchdog Timer. + +config RALINK_WDT + tristate "Ralink SoC watchdog" + select WATCHDOG_CORE + depends on RALINK + help + Hardware driver for the Ralink SoC Watchdog Timer. + +config MT7621_WDT + tristate "Mediatek SoC watchdog" + select WATCHDOG_CORE + depends on SOC_MT7620 || SOC_MT7621 + help + Hardware driver for the Mediatek/Ralink MT7621/8 SoC Watchdog Timer. + +config PIC32_WDT + tristate "Microchip PIC32 hardware watchdog" + select WATCHDOG_CORE + depends on MACH_PIC32 || (MIPS && COMPILE_TEST) + help + Watchdog driver for the built in watchdog hardware in a PIC32. + + Configuration bits must be set appropriately for the watchdog to be + controlled by this driver. + + To compile this driver as a loadable module, choose M here. + The module will be called pic32-wdt. + +config PIC32_DMT + tristate "Microchip PIC32 Deadman Timer" + select WATCHDOG_CORE + depends on MACH_PIC32 || (MIPS && COMPILE_TEST) + help + Watchdog driver for PIC32 instruction fetch counting timer. This specific + timer is typically be used in misson critical and safety critical + applications, where any single failure of the software functionality + and sequencing must be detected. + + To compile this driver as a loadable module, choose M here. + The module will be called pic32-dmt. + +# PARISC Architecture + +# POWERPC Architecture + +config GEF_WDT + tristate "GE Watchdog Timer" + depends on GE_FPGA + ---help--- + Watchdog timer found in a number of GE single board computers. + +config MPC5200_WDT + bool "MPC52xx Watchdog Timer" + depends on PPC_MPC52xx || COMPILE_TEST + help + Use General Purpose Timer (GPT) 0 on the MPC5200 as Watchdog. + +config 8xxx_WDT + tristate "MPC8xxx Platform Watchdog Timer" + depends on PPC_8xx || PPC_83xx || PPC_86xx || PPC_MPC512x + select WATCHDOG_CORE + help + This driver is for a SoC level watchdog that exists on some + Freescale PowerPC processors. So far this driver supports: + - MPC8xx watchdogs + - MPC83xx watchdogs + - MPC86xx watchdogs + + For BookE processors (MPC85xx) use the BOOKE_WDT driver instead. + +config MV64X60_WDT + tristate "MV64X60 (Marvell Discovery) Watchdog Timer" + depends on MV64X60 || COMPILE_TEST + +config PIKA_WDT + tristate "PIKA FPGA Watchdog" + depends on WARP || (PPC64 && COMPILE_TEST) + default y + help + This enables the watchdog in the PIKA FPGA. Currently used on + the Warp platform. + +config BOOKE_WDT + tristate "PowerPC Book-E Watchdog Timer" + depends on BOOKE || 4xx + select WATCHDOG_CORE + ---help--- + Watchdog driver for PowerPC Book-E chips, such as the Freescale + MPC85xx SOCs and the IBM PowerPC 440. + + Please see Documentation/watchdog/watchdog-api.txt for + more information. + +config BOOKE_WDT_DEFAULT_TIMEOUT + int "PowerPC Book-E Watchdog Timer Default Timeout" + depends on BOOKE_WDT + default 38 if PPC_FSL_BOOK3E + range 0 63 if PPC_FSL_BOOK3E + default 3 if !PPC_FSL_BOOK3E + range 0 3 if !PPC_FSL_BOOK3E + help + Select the default watchdog timer period to be used by the PowerPC + Book-E watchdog driver. A watchdog "event" occurs when the bit + position represented by this number transitions from zero to one. + + For Freescale Book-E processors, this is a number between 0 and 63. + For other Book-E processors, this is a number between 0 and 3. + + The value can be overridden by the wdt_period command-line parameter. + +config MEN_A21_WDT + tristate "MEN A21 VME CPU Carrier Board Watchdog Timer" + select WATCHDOG_CORE + depends on GPIOLIB || COMPILE_TEST + help + Watchdog driver for MEN A21 VMEbus CPU Carrier Boards. + + The driver can also be built as a module. If so, the module will be + called mena21_wdt. + + If unsure select N here. + +# PPC64 Architecture + +config WATCHDOG_RTAS + tristate "RTAS watchdog" + depends on PPC_RTAS + help + This driver adds watchdog support for the RTAS watchdog. + + To compile this driver as a module, choose M here. The module + will be called wdrtas. + +# S390 Architecture + +config DIAG288_WATCHDOG + tristate "System z diag288 Watchdog" + depends on S390 + select WATCHDOG_CORE + help + IBM s/390 and zSeries machines running under z/VM 5.1 or later + provide a virtual watchdog timer to their guest that cause a + user define Control Program command to be executed after a + timeout. + LPAR provides a very similar interface. This driver handles + both. + + To compile this driver as a module, choose M here. The module + will be called diag288_wdt. + +# SUPERH (sh + sh64) Architecture + +config SH_WDT + tristate "SuperH Watchdog" + depends on SUPERH && (CPU_SH3 || CPU_SH4 || COMPILE_TEST) + select WATCHDOG_CORE + help + This driver adds watchdog support for the integrated watchdog in the + SuperH processors. If you have one of these processors and wish + to have watchdog support enabled, say Y, otherwise say N. + + As a side note, saying Y here will automatically boost HZ to 1000 + so that the timer has a chance to clear the overflow counter. On + slower systems (such as the SH-2 and SH-3) this will likely yield + some performance issues. As such, the WDT should be avoided here + unless it is absolutely necessary. + + To compile this driver as a module, choose M here: the + module will be called shwdt. + +# SPARC Architecture + +# SPARC64 Architecture + +config WATCHDOG_CP1XXX + tristate "CP1XXX Hardware Watchdog support" + depends on SPARC64 && PCI + ---help--- + This is the driver for the hardware watchdog timers present on + Sun Microsystems CompactPCI models CP1400 and CP1500. + + To compile this driver as a module, choose M here: the + module will be called cpwatchdog. + + If you do not have a CompactPCI model CP1400 or CP1500, or + another UltraSPARC-IIi-cEngine boardset with hardware watchdog, + you should say N to this option. + +config WATCHDOG_RIO + tristate "RIO Hardware Watchdog support" + depends on SPARC64 && PCI + help + Say Y here to support the hardware watchdog capability on Sun RIO + machines. The watchdog timeout period is normally one minute but + can be changed with a boot-time parameter. + +config WATCHDOG_SUN4V + tristate "Sun4v Watchdog support" + select WATCHDOG_CORE + depends on SPARC64 + help + Say Y here to support the hypervisor watchdog capability embedded + in the SPARC sun4v architecture. + + To compile this driver as a module, choose M here. The module will + be called sun4v_wdt. + +# XTENSA Architecture + +# Xen Architecture + +config XEN_WDT + tristate "Xen Watchdog support" + depends on XEN + select WATCHDOG_CORE + help + Say Y here to support the hypervisor watchdog capability provided + by Xen 4.0 and newer. The watchdog timeout period is normally one + minute but can be changed with a boot-time parameter. + +config UML_WATCHDOG + tristate "UML watchdog" + depends on UML || COMPILE_TEST + +# +# ISA-based Watchdog Cards +# + +comment "ISA-based Watchdog Cards" + depends on ISA + +config PCWATCHDOG + tristate "Berkshire Products ISA-PC Watchdog" + depends on ISA + ---help--- + This is the driver for the Berkshire Products ISA-PC Watchdog card. + This card simply watches your kernel to make sure it doesn't freeze, + and if it does, it reboots your computer after a certain amount of + time. This driver is like the WDT501 driver but for different + hardware. Please read <file:Documentation/watchdog/pcwd-watchdog.txt>. The PC + watchdog cards can be ordered from <http://www.berkprod.com/>. + + To compile this driver as a module, choose M here: the + module will be called pcwd. + + Most people will say N. + +config MIXCOMWD + tristate "Mixcom Watchdog" + depends on ISA + ---help--- + This is a driver for the Mixcom hardware watchdog cards. This + watchdog simply watches your kernel to make sure it doesn't freeze, + and if it does, it reboots your computer after a certain amount of + time. + + To compile this driver as a module, choose M here: the + module will be called mixcomwd. + + Most people will say N. + +config WDT + tristate "WDT Watchdog timer" + depends on ISA + ---help--- + If you have a WDT500P or WDT501P watchdog board, say Y here, + otherwise N. It is not possible to probe for this board, which means + that you have to inform the kernel about the IO port and IRQ that + is needed (you can do this via the io and irq parameters) + + To compile this driver as a module, choose M here: the + module will be called wdt. + +# +# PCI-based Watchdog Cards +# + +comment "PCI-based Watchdog Cards" + depends on PCI + +config PCIPCWATCHDOG + tristate "Berkshire Products PCI-PC Watchdog" + depends on PCI + ---help--- + This is the driver for the Berkshire Products PCI-PC Watchdog card. + This card simply watches your kernel to make sure it doesn't freeze, + and if it does, it reboots your computer after a certain amount of + time. The card can also monitor the internal temperature of the PC. + More info is available at <http://www.berkprod.com/pci_pc_watchdog.htm>. + + To compile this driver as a module, choose M here: the + module will be called pcwd_pci. + + Most people will say N. + +config WDTPCI + tristate "PCI-WDT500/501 Watchdog timer" + depends on PCI + ---help--- + If you have a PCI-WDT500/501 watchdog board, say Y here, otherwise N. + + If you have a PCI-WDT501 watchdog board then you can enable the + temperature sensor by setting the type parameter to 501. + + If you want to enable the Fan Tachometer on the PCI-WDT501, then you + can do this via the tachometer parameter. Only do this if you have a + fan tachometer actually set up. + + To compile this driver as a module, choose M here: the + module will be called wdt_pci. + +# +# USB-based Watchdog Cards +# + +comment "USB-based Watchdog Cards" + depends on USB + +config USBPCWATCHDOG + tristate "Berkshire Products USB-PC Watchdog" + depends on USB + ---help--- + This is the driver for the Berkshire Products USB-PC Watchdog card. + This card simply watches your kernel to make sure it doesn't freeze, + and if it does, it reboots your computer after a certain amount of + time. The card can also monitor the internal temperature of the PC. + More info is available at <http://www.berkprod.com/usb_pc_watchdog.htm>. + + To compile this driver as a module, choose M here: the + module will be called pcwd_usb. + + Most people will say N. + +comment "Watchdog Pretimeout Governors" + +config WATCHDOG_PRETIMEOUT_GOV + bool "Enable watchdog pretimeout governors" + depends on WATCHDOG_CORE + help + The option allows to select watchdog pretimeout governors. + +if WATCHDOG_PRETIMEOUT_GOV + +choice + prompt "Default Watchdog Pretimeout Governor" + default WATCHDOG_PRETIMEOUT_DEFAULT_GOV_PANIC + help + This option selects a default watchdog pretimeout governor. + The governor takes its action, if a watchdog is capable + to report a pretimeout event. + +config WATCHDOG_PRETIMEOUT_DEFAULT_GOV_NOOP + bool "noop" + select WATCHDOG_PRETIMEOUT_GOV_NOOP + help + Use noop watchdog pretimeout governor by default. If noop + governor is selected by a user, write a short message to + the kernel log buffer and don't do any system changes. + +config WATCHDOG_PRETIMEOUT_DEFAULT_GOV_PANIC + bool "panic" + select WATCHDOG_PRETIMEOUT_GOV_PANIC + help + Use panic watchdog pretimeout governor by default, if + a watchdog pretimeout event happens, consider that + a watchdog feeder is dead and reboot is unavoidable. + +endchoice + +config WATCHDOG_PRETIMEOUT_GOV_NOOP + tristate "Noop watchdog pretimeout governor" + help + Noop watchdog pretimeout governor, only an informational + message is added to kernel log buffer. + +config WATCHDOG_PRETIMEOUT_GOV_PANIC + tristate "Panic watchdog pretimeout governor" + help + Panic watchdog pretimeout governor, on watchdog pretimeout + event put the kernel into panic. + +endif # WATCHDOG_PRETIMEOUT_GOV + +endif # WATCHDOG diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile new file mode 100644 index 000000000..bf92e7bf9 --- /dev/null +++ b/drivers/watchdog/Makefile @@ -0,0 +1,219 @@ +# SPDX-License-Identifier: GPL-2.0 +# +# Makefile for the WatchDog device drivers. +# + +# The WatchDog Timer Driver Core. +obj-$(CONFIG_WATCHDOG_CORE) += watchdog.o + +watchdog-objs += watchdog_core.o watchdog_dev.o + +watchdog-$(CONFIG_WATCHDOG_PRETIMEOUT_GOV) += watchdog_pretimeout.o + +obj-$(CONFIG_WATCHDOG_PRETIMEOUT_GOV_NOOP) += pretimeout_noop.o +obj-$(CONFIG_WATCHDOG_PRETIMEOUT_GOV_PANIC) += pretimeout_panic.o + +# Only one watchdog can succeed. We probe the ISA/PCI/USB based +# watchdog-cards first, then the architecture specific watchdog +# drivers and then the architecture independent "softdog" driver. +# This means that if your ISA/PCI/USB card isn't detected that +# you can fall back to an architecture specific driver and if +# that also fails then you can fall back to the software watchdog +# to give you some cover. + +# ISA-based Watchdog Cards +obj-$(CONFIG_PCWATCHDOG) += pcwd.o +obj-$(CONFIG_MIXCOMWD) += mixcomwd.o +obj-$(CONFIG_WDT) += wdt.o + +# PCI-based Watchdog Cards +obj-$(CONFIG_PCIPCWATCHDOG) += pcwd_pci.o +obj-$(CONFIG_WDTPCI) += wdt_pci.o + +# USB-based Watchdog Cards +obj-$(CONFIG_USBPCWATCHDOG) += pcwd_usb.o + +# ALPHA Architecture + +# ARM Architecture +obj-$(CONFIG_ARM_SP805_WATCHDOG) += sp805_wdt.o +obj-$(CONFIG_ARM_SBSA_WATCHDOG) += sbsa_gwdt.o +obj-$(CONFIG_ASM9260_WATCHDOG) += asm9260_wdt.o +obj-$(CONFIG_AT91RM9200_WATCHDOG) += at91rm9200_wdt.o +obj-$(CONFIG_AT91SAM9X_WATCHDOG) += at91sam9_wdt.o +obj-$(CONFIG_CADENCE_WATCHDOG) += cadence_wdt.o +obj-$(CONFIG_OMAP_WATCHDOG) += omap_wdt.o +obj-$(CONFIG_TWL4030_WATCHDOG) += twl4030_wdt.o +obj-$(CONFIG_21285_WATCHDOG) += wdt285.o +obj-$(CONFIG_977_WATCHDOG) += wdt977.o +obj-$(CONFIG_FTWDT010_WATCHDOG) += ftwdt010_wdt.o +obj-$(CONFIG_IXP4XX_WATCHDOG) += ixp4xx_wdt.o +obj-$(CONFIG_KS8695_WATCHDOG) += ks8695_wdt.o +obj-$(CONFIG_S3C2410_WATCHDOG) += s3c2410_wdt.o +obj-$(CONFIG_SA1100_WATCHDOG) += sa1100_wdt.o +obj-$(CONFIG_SAMA5D4_WATCHDOG) += sama5d4_wdt.o +obj-$(CONFIG_DW_WATCHDOG) += dw_wdt.o +obj-$(CONFIG_EP93XX_WATCHDOG) += ep93xx_wdt.o +obj-$(CONFIG_PNX4008_WATCHDOG) += pnx4008_wdt.o +obj-$(CONFIG_IOP_WATCHDOG) += iop_wdt.o +obj-$(CONFIG_DAVINCI_WATCHDOG) += davinci_wdt.o +obj-$(CONFIG_ORION_WATCHDOG) += orion_wdt.o +obj-$(CONFIG_SUNXI_WATCHDOG) += sunxi_wdt.o +obj-$(CONFIG_RN5T618_WATCHDOG) += rn5t618_wdt.o +obj-$(CONFIG_COH901327_WATCHDOG) += coh901327_wdt.o +obj-$(CONFIG_NPCM7XX_WATCHDOG) += npcm_wdt.o +obj-$(CONFIG_STMP3XXX_RTC_WATCHDOG) += stmp3xxx_rtc_wdt.o +obj-$(CONFIG_NUC900_WATCHDOG) += nuc900_wdt.o +obj-$(CONFIG_TS4800_WATCHDOG) += ts4800_wdt.o +obj-$(CONFIG_TS72XX_WATCHDOG) += ts72xx_wdt.o +obj-$(CONFIG_IMX2_WDT) += imx2_wdt.o +obj-$(CONFIG_UX500_WATCHDOG) += ux500_wdt.o +obj-$(CONFIG_RETU_WATCHDOG) += retu_wdt.o +obj-$(CONFIG_BCM2835_WDT) += bcm2835_wdt.o +obj-$(CONFIG_MOXART_WDT) += moxart_wdt.o +obj-$(CONFIG_SIRFSOC_WATCHDOG) += sirfsoc_wdt.o +obj-$(CONFIG_ST_LPC_WATCHDOG) += st_lpc_wdt.o +obj-$(CONFIG_QCOM_WDT) += qcom-wdt.o +obj-$(CONFIG_BCM_KONA_WDT) += bcm_kona_wdt.o +obj-$(CONFIG_TEGRA_WATCHDOG) += tegra_wdt.o +obj-$(CONFIG_MESON_GXBB_WATCHDOG) += meson_gxbb_wdt.o +obj-$(CONFIG_MESON_WATCHDOG) += meson_wdt.o +obj-$(CONFIG_MEDIATEK_WATCHDOG) += mtk_wdt.o +obj-$(CONFIG_DIGICOLOR_WATCHDOG) += digicolor_wdt.o +obj-$(CONFIG_LPC18XX_WATCHDOG) += lpc18xx_wdt.o +obj-$(CONFIG_BCM7038_WDT) += bcm7038_wdt.o +obj-$(CONFIG_ATLAS7_WATCHDOG) += atlas7_wdt.o +obj-$(CONFIG_RENESAS_WDT) += renesas_wdt.o +obj-$(CONFIG_RENESAS_RZAWDT) += rza_wdt.o +obj-$(CONFIG_ASPEED_WATCHDOG) += aspeed_wdt.o +obj-$(CONFIG_ZX2967_WATCHDOG) += zx2967_wdt.o +obj-$(CONFIG_STM32_WATCHDOG) += stm32_iwdg.o +obj-$(CONFIG_UNIPHIER_WATCHDOG) += uniphier_wdt.o +obj-$(CONFIG_RTD119X_WATCHDOG) += rtd119x_wdt.o +obj-$(CONFIG_SPRD_WATCHDOG) += sprd_wdt.o + +# X86 (i386 + ia64 + x86_64) Architecture +obj-$(CONFIG_ACQUIRE_WDT) += acquirewdt.o +obj-$(CONFIG_ADVANTECH_WDT) += advantechwdt.o +obj-$(CONFIG_ALIM1535_WDT) += alim1535_wdt.o +obj-$(CONFIG_ALIM7101_WDT) += alim7101_wdt.o +obj-$(CONFIG_EBC_C384_WDT) += ebc-c384_wdt.o +obj-$(CONFIG_F71808E_WDT) += f71808e_wdt.o +obj-$(CONFIG_SP5100_TCO) += sp5100_tco.o +obj-$(CONFIG_GEODE_WDT) += geodewdt.o +obj-$(CONFIG_SC520_WDT) += sc520_wdt.o +obj-$(CONFIG_SBC_FITPC2_WATCHDOG) += sbc_fitpc2_wdt.o +obj-$(CONFIG_EUROTECH_WDT) += eurotechwdt.o +obj-$(CONFIG_IB700_WDT) += ib700wdt.o +obj-$(CONFIG_IBMASR) += ibmasr.o +obj-$(CONFIG_WAFER_WDT) += wafer5823wdt.o +obj-$(CONFIG_I6300ESB_WDT) += i6300esb.o +obj-$(CONFIG_IE6XX_WDT) += ie6xx_wdt.o +obj-$(CONFIG_ITCO_WDT) += iTCO_wdt.o +ifeq ($(CONFIG_ITCO_VENDOR_SUPPORT),y) +obj-$(CONFIG_ITCO_WDT) += iTCO_vendor_support.o +endif +obj-$(CONFIG_IT8712F_WDT) += it8712f_wdt.o +obj-$(CONFIG_IT87_WDT) += it87_wdt.o +obj-$(CONFIG_HP_WATCHDOG) += hpwdt.o +obj-$(CONFIG_KEMPLD_WDT) += kempld_wdt.o +obj-$(CONFIG_SC1200_WDT) += sc1200wdt.o +obj-$(CONFIG_SCx200_WDT) += scx200_wdt.o +obj-$(CONFIG_PC87413_WDT) += pc87413_wdt.o +obj-$(CONFIG_NV_TCO) += nv_tco.o +obj-$(CONFIG_RDC321X_WDT) += rdc321x_wdt.o +obj-$(CONFIG_60XX_WDT) += sbc60xxwdt.o +obj-$(CONFIG_SBC8360_WDT) += sbc8360.o +obj-$(CONFIG_SBC7240_WDT) += sbc7240_wdt.o +obj-$(CONFIG_CPU5_WDT) += cpu5wdt.o +obj-$(CONFIG_SMSC_SCH311X_WDT) += sch311x_wdt.o +obj-$(CONFIG_SMSC37B787_WDT) += smsc37b787_wdt.o +obj-$(CONFIG_VIA_WDT) += via_wdt.o +obj-$(CONFIG_W83627HF_WDT) += w83627hf_wdt.o +obj-$(CONFIG_W83877F_WDT) += w83877f_wdt.o +obj-$(CONFIG_W83977F_WDT) += w83977f_wdt.o +obj-$(CONFIG_MACHZ_WDT) += machzwd.o +obj-$(CONFIG_SBC_EPX_C3_WATCHDOG) += sbc_epx_c3.o +obj-$(CONFIG_INTEL_SCU_WATCHDOG) += intel_scu_watchdog.o +obj-$(CONFIG_INTEL_MID_WATCHDOG) += intel-mid_wdt.o +obj-$(CONFIG_INTEL_MEI_WDT) += mei_wdt.o +obj-$(CONFIG_NI903X_WDT) += ni903x_wdt.o +obj-$(CONFIG_NIC7018_WDT) += nic7018_wdt.o + +# M68K Architecture +obj-$(CONFIG_M54xx_WATCHDOG) += m54xx_wdt.o + +# MicroBlaze Architecture +obj-$(CONFIG_XILINX_WATCHDOG) += of_xilinx_wdt.o + +# MIPS Architecture +obj-$(CONFIG_ATH79_WDT) += ath79_wdt.o +obj-$(CONFIG_BCM47XX_WDT) += bcm47xx_wdt.o +obj-$(CONFIG_BCM63XX_WDT) += bcm63xx_wdt.o +obj-$(CONFIG_RC32434_WDT) += rc32434_wdt.o +obj-$(CONFIG_INDYDOG) += indydog.o +obj-$(CONFIG_JZ4740_WDT) += jz4740_wdt.o +obj-$(CONFIG_WDT_MTX1) += mtx-1_wdt.o +obj-$(CONFIG_PNX833X_WDT) += pnx833x_wdt.o +obj-$(CONFIG_SIBYTE_WDOG) += sb_wdog.o +obj-$(CONFIG_AR7_WDT) += ar7_wdt.o +obj-$(CONFIG_TXX9_WDT) += txx9wdt.o +obj-$(CONFIG_OCTEON_WDT) += octeon-wdt.o +octeon-wdt-y := octeon-wdt-main.o octeon-wdt-nmi.o +obj-$(CONFIG_LANTIQ_WDT) += lantiq_wdt.o +obj-$(CONFIG_LOONGSON1_WDT) += loongson1_wdt.o +obj-$(CONFIG_RALINK_WDT) += rt2880_wdt.o +obj-$(CONFIG_IMGPDC_WDT) += imgpdc_wdt.o +obj-$(CONFIG_MT7621_WDT) += mt7621_wdt.o +obj-$(CONFIG_PIC32_WDT) += pic32-wdt.o +obj-$(CONFIG_PIC32_DMT) += pic32-dmt.o + +# PARISC Architecture + +# POWERPC Architecture +obj-$(CONFIG_GEF_WDT) += gef_wdt.o +obj-$(CONFIG_8xxx_WDT) += mpc8xxx_wdt.o +obj-$(CONFIG_MV64X60_WDT) += mv64x60_wdt.o +obj-$(CONFIG_PIKA_WDT) += pika_wdt.o +obj-$(CONFIG_BOOKE_WDT) += booke_wdt.o +obj-$(CONFIG_MEN_A21_WDT) += mena21_wdt.o + +# PPC64 Architecture +obj-$(CONFIG_WATCHDOG_RTAS) += wdrtas.o + +# S390 Architecture +obj-$(CONFIG_DIAG288_WATCHDOG) += diag288_wdt.o + +# SUPERH (sh + sh64) Architecture +obj-$(CONFIG_SH_WDT) += shwdt.o + +# SPARC Architecture + +# SPARC64 Architecture + +obj-$(CONFIG_WATCHDOG_RIO) += riowd.o +obj-$(CONFIG_WATCHDOG_CP1XXX) += cpwd.o +obj-$(CONFIG_WATCHDOG_SUN4V) += sun4v_wdt.o + +# XTENSA Architecture + +# Xen +obj-$(CONFIG_XEN_WDT) += xen_wdt.o + +# Architecture Independent +obj-$(CONFIG_DA9052_WATCHDOG) += da9052_wdt.o +obj-$(CONFIG_DA9055_WATCHDOG) += da9055_wdt.o +obj-$(CONFIG_DA9062_WATCHDOG) += da9062_wdt.o +obj-$(CONFIG_DA9063_WATCHDOG) += da9063_wdt.o +obj-$(CONFIG_GPIO_WATCHDOG) += gpio_wdt.o +obj-$(CONFIG_TANGOX_WATCHDOG) += tangox_wdt.o +obj-$(CONFIG_WDAT_WDT) += wdat_wdt.o +obj-$(CONFIG_WM831X_WATCHDOG) += wm831x_wdt.o +obj-$(CONFIG_WM8350_WATCHDOG) += wm8350_wdt.o +obj-$(CONFIG_MAX63XX_WATCHDOG) += max63xx_wdt.o +obj-$(CONFIG_MAX77620_WATCHDOG) += max77620_wdt.o +obj-$(CONFIG_ZIIRAVE_WATCHDOG) += ziirave_wdt.o +obj-$(CONFIG_SOFT_WATCHDOG) += softdog.o +obj-$(CONFIG_MENF21BMC_WATCHDOG) += menf21bmc_wdt.o +obj-$(CONFIG_MENZ069_WATCHDOG) += menz69_wdt.o +obj-$(CONFIG_RAVE_SP_WATCHDOG) += rave-sp-wdt.o diff --git a/drivers/watchdog/acquirewdt.c b/drivers/watchdog/acquirewdt.c new file mode 100644 index 000000000..d6210d946 --- /dev/null +++ b/drivers/watchdog/acquirewdt.c @@ -0,0 +1,334 @@ +/* + * Acquire Single Board Computer Watchdog Timer driver + * + * Based on wdt.c. Original copyright messages: + * + * (c) Copyright 1996 Alan Cox <alan@lxorguk.ukuu.org.uk>, + * All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * Neither Alan Cox nor CymruNet Ltd. admit liability nor provide + * warranty for any of this software. This material is provided + * "AS-IS" and at no charge. + * + * (c) Copyright 1995 Alan Cox <alan@lxorguk.ukuu.org.uk> + * + * 14-Dec-2001 Matt Domsch <Matt_Domsch@dell.com> + * Added nowayout module option to override CONFIG_WATCHDOG_NOWAYOUT + * Can't add timeout - driver doesn't allow changing value + */ + +/* + * Theory of Operation: + * The Watch-Dog Timer is provided to ensure that standalone + * Systems can always recover from catastrophic conditions that + * caused the CPU to crash. This condition may have occurred by + * external EMI or a software bug. When the CPU stops working + * correctly, hardware on the board will either perform a hardware + * reset (cold boot) or a non-maskable interrupt (NMI) to bring the + * system back to a known state. + * + * The Watch-Dog Timer is controlled by two I/O Ports. + * 443 hex - Read - Enable or refresh the Watch-Dog Timer + * 043 hex - Read - Disable the Watch-Dog Timer + * + * To enable the Watch-Dog Timer, a read from I/O port 443h must + * be performed. This will enable and activate the countdown timer + * which will eventually time out and either reset the CPU or cause + * an NMI depending on the setting of a jumper. To ensure that this + * reset condition does not occur, the Watch-Dog Timer must be + * periodically refreshed by reading the same I/O port 443h. + * The Watch-Dog Timer is disabled by reading I/O port 043h. + * + * The Watch-Dog Timer Time-Out Period is set via jumpers. + * It can be 1, 2, 10, 20, 110 or 220 seconds. + */ + +/* + * Includes, defines, variables, module parameters, ... + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +/* Includes */ +#include <linux/module.h> /* For module specific items */ +#include <linux/moduleparam.h> /* For new moduleparam's */ +#include <linux/types.h> /* For standard types (like size_t) */ +#include <linux/errno.h> /* For the -ENODEV/... values */ +#include <linux/kernel.h> /* For printk/panic/... */ +#include <linux/miscdevice.h> /* For struct miscdevice */ +#include <linux/watchdog.h> /* For the watchdog specific items */ +#include <linux/fs.h> /* For file operations */ +#include <linux/ioport.h> /* For io-port access */ +#include <linux/platform_device.h> /* For platform_driver framework */ +#include <linux/init.h> /* For __init/__exit/... */ +#include <linux/uaccess.h> /* For copy_to_user/put_user/... */ +#include <linux/io.h> /* For inb/outb/... */ + +/* Module information */ +#define DRV_NAME "acquirewdt" +#define WATCHDOG_NAME "Acquire WDT" +/* There is no way to see what the correct time-out period is */ +#define WATCHDOG_HEARTBEAT 0 + +/* internal variables */ +/* the watchdog platform device */ +static struct platform_device *acq_platform_device; +static unsigned long acq_is_open; +static char expect_close; + +/* module parameters */ +/* You must set this - there is no sane way to probe for this board. */ +static int wdt_stop = 0x43; +module_param(wdt_stop, int, 0); +MODULE_PARM_DESC(wdt_stop, "Acquire WDT 'stop' io port (default 0x43)"); + +/* You must set this - there is no sane way to probe for this board. */ +static int wdt_start = 0x443; +module_param(wdt_start, int, 0); +MODULE_PARM_DESC(wdt_start, "Acquire WDT 'start' io port (default 0x443)"); + +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); +MODULE_PARM_DESC(nowayout, + "Watchdog cannot be stopped once started (default=" + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); + +/* + * Watchdog Operations + */ + +static void acq_keepalive(void) +{ + /* Write a watchdog value */ + inb_p(wdt_start); +} + +static void acq_stop(void) +{ + /* Turn the card off */ + inb_p(wdt_stop); +} + +/* + * /dev/watchdog handling + */ + +static ssize_t acq_write(struct file *file, const char __user *buf, + size_t count, loff_t *ppos) +{ + /* See if we got the magic character 'V' and reload the timer */ + if (count) { + if (!nowayout) { + size_t i; + /* note: just in case someone wrote the magic character + five months ago... */ + expect_close = 0; + /* scan to see whether or not we got the + magic character */ + for (i = 0; i != count; i++) { + char c; + if (get_user(c, buf + i)) + return -EFAULT; + if (c == 'V') + expect_close = 42; + } + } + /* Well, anyhow someone wrote to us, we should + return that favour */ + acq_keepalive(); + } + return count; +} + +static long acq_ioctl(struct file *file, unsigned int cmd, unsigned long arg) +{ + int options, retval = -EINVAL; + void __user *argp = (void __user *)arg; + int __user *p = argp; + static const struct watchdog_info ident = { + .options = WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE, + .firmware_version = 1, + .identity = WATCHDOG_NAME, + }; + + switch (cmd) { + case WDIOC_GETSUPPORT: + return copy_to_user(argp, &ident, sizeof(ident)) ? -EFAULT : 0; + + case WDIOC_GETSTATUS: + case WDIOC_GETBOOTSTATUS: + return put_user(0, p); + + case WDIOC_SETOPTIONS: + { + if (get_user(options, p)) + return -EFAULT; + if (options & WDIOS_DISABLECARD) { + acq_stop(); + retval = 0; + } + if (options & WDIOS_ENABLECARD) { + acq_keepalive(); + retval = 0; + } + return retval; + } + case WDIOC_KEEPALIVE: + acq_keepalive(); + return 0; + + case WDIOC_GETTIMEOUT: + return put_user(WATCHDOG_HEARTBEAT, p); + + default: + return -ENOTTY; + } +} + +static int acq_open(struct inode *inode, struct file *file) +{ + if (test_and_set_bit(0, &acq_is_open)) + return -EBUSY; + + if (nowayout) + __module_get(THIS_MODULE); + + /* Activate */ + acq_keepalive(); + return nonseekable_open(inode, file); +} + +static int acq_close(struct inode *inode, struct file *file) +{ + if (expect_close == 42) { + acq_stop(); + } else { + pr_crit("Unexpected close, not stopping watchdog!\n"); + acq_keepalive(); + } + clear_bit(0, &acq_is_open); + expect_close = 0; + return 0; +} + +/* + * Kernel Interfaces + */ + +static const struct file_operations acq_fops = { + .owner = THIS_MODULE, + .llseek = no_llseek, + .write = acq_write, + .unlocked_ioctl = acq_ioctl, + .open = acq_open, + .release = acq_close, +}; + +static struct miscdevice acq_miscdev = { + .minor = WATCHDOG_MINOR, + .name = "watchdog", + .fops = &acq_fops, +}; + +/* + * Init & exit routines + */ + +static int __init acq_probe(struct platform_device *dev) +{ + int ret; + + if (wdt_stop != wdt_start) { + if (!request_region(wdt_stop, 1, WATCHDOG_NAME)) { + pr_err("I/O address 0x%04x already in use\n", wdt_stop); + ret = -EIO; + goto out; + } + } + + if (!request_region(wdt_start, 1, WATCHDOG_NAME)) { + pr_err("I/O address 0x%04x already in use\n", wdt_start); + ret = -EIO; + goto unreg_stop; + } + ret = misc_register(&acq_miscdev); + if (ret != 0) { + pr_err("cannot register miscdev on minor=%d (err=%d)\n", + WATCHDOG_MINOR, ret); + goto unreg_regions; + } + pr_info("initialized. (nowayout=%d)\n", nowayout); + + return 0; +unreg_regions: + release_region(wdt_start, 1); +unreg_stop: + if (wdt_stop != wdt_start) + release_region(wdt_stop, 1); +out: + return ret; +} + +static int acq_remove(struct platform_device *dev) +{ + misc_deregister(&acq_miscdev); + release_region(wdt_start, 1); + if (wdt_stop != wdt_start) + release_region(wdt_stop, 1); + + return 0; +} + +static void acq_shutdown(struct platform_device *dev) +{ + /* Turn the WDT off if we have a soft shutdown */ + acq_stop(); +} + +static struct platform_driver acquirewdt_driver = { + .remove = acq_remove, + .shutdown = acq_shutdown, + .driver = { + .name = DRV_NAME, + }, +}; + +static int __init acq_init(void) +{ + int err; + + pr_info("WDT driver for Acquire single board computer initialising\n"); + + acq_platform_device = platform_device_register_simple(DRV_NAME, + -1, NULL, 0); + if (IS_ERR(acq_platform_device)) + return PTR_ERR(acq_platform_device); + + err = platform_driver_probe(&acquirewdt_driver, acq_probe); + if (err) + goto unreg_platform_device; + return 0; + +unreg_platform_device: + platform_device_unregister(acq_platform_device); + return err; +} + +static void __exit acq_exit(void) +{ + platform_device_unregister(acq_platform_device); + platform_driver_unregister(&acquirewdt_driver); + pr_info("Watchdog Module Unloaded\n"); +} + +module_init(acq_init); +module_exit(acq_exit); + +MODULE_AUTHOR("David Woodhouse"); +MODULE_DESCRIPTION("Acquire Inc. Single Board Computer Watchdog Timer driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/watchdog/advantechwdt.c b/drivers/watchdog/advantechwdt.c new file mode 100644 index 000000000..f61944369 --- /dev/null +++ b/drivers/watchdog/advantechwdt.c @@ -0,0 +1,343 @@ +/* + * Advantech Single Board Computer WDT driver + * + * (c) Copyright 2000-2001 Marek Michalkiewicz <marekm@linux.org.pl> + * + * Based on acquirewdt.c which is based on wdt.c. + * Original copyright messages: + * + * (c) Copyright 1996 Alan Cox <alan@lxorguk.ukuu.org.uk>, + * All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * Neither Alan Cox nor CymruNet Ltd. admit liability nor provide + * warranty for any of this software. This material is provided + * "AS-IS" and at no charge. + * + * (c) Copyright 1995 Alan Cox <alan@lxorguk.ukuu.org.uk> + * + * 14-Dec-2001 Matt Domsch <Matt_Domsch@dell.com> + * Added nowayout module option to override CONFIG_WATCHDOG_NOWAYOUT + * + * 16-Oct-2002 Rob Radez <rob@osinvestor.com> + * Clean up ioctls, clean up init + exit, add expect close support, + * add wdt_start and wdt_stop as parameters. + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/types.h> +#include <linux/miscdevice.h> +#include <linux/watchdog.h> +#include <linux/fs.h> +#include <linux/ioport.h> +#include <linux/platform_device.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/uaccess.h> + + +#define DRV_NAME "advantechwdt" +#define WATCHDOG_NAME "Advantech WDT" +#define WATCHDOG_TIMEOUT 60 /* 60 sec default timeout */ + +/* the watchdog platform device */ +static struct platform_device *advwdt_platform_device; +static unsigned long advwdt_is_open; +static char adv_expect_close; + +/* + * You must set these - there is no sane way to probe for this board. + * + * To enable or restart, write the timeout value in seconds (1 to 63) + * to I/O port wdt_start. To disable, read I/O port wdt_stop. + * Both are 0x443 for most boards (tested on a PCA-6276VE-00B1), but + * check your manual (at least the PCA-6159 seems to be different - + * the manual says wdt_stop is 0x43, not 0x443). + * (0x43 is also a write-only control register for the 8254 timer!) + */ + +static int wdt_stop = 0x443; +module_param(wdt_stop, int, 0); +MODULE_PARM_DESC(wdt_stop, "Advantech WDT 'stop' io port (default 0x443)"); + +static int wdt_start = 0x443; +module_param(wdt_start, int, 0); +MODULE_PARM_DESC(wdt_start, "Advantech WDT 'start' io port (default 0x443)"); + +static int timeout = WATCHDOG_TIMEOUT; /* in seconds */ +module_param(timeout, int, 0); +MODULE_PARM_DESC(timeout, + "Watchdog timeout in seconds. 1<= timeout <=63, default=" + __MODULE_STRING(WATCHDOG_TIMEOUT) "."); + +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); +MODULE_PARM_DESC(nowayout, + "Watchdog cannot be stopped once started (default=" + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); + +/* + * Watchdog Operations + */ + +static void advwdt_ping(void) +{ + /* Write a watchdog value */ + outb_p(timeout, wdt_start); +} + +static void advwdt_disable(void) +{ + inb_p(wdt_stop); +} + +static int advwdt_set_heartbeat(int t) +{ + if (t < 1 || t > 63) + return -EINVAL; + timeout = t; + return 0; +} + +/* + * /dev/watchdog handling + */ + +static ssize_t advwdt_write(struct file *file, const char __user *buf, + size_t count, loff_t *ppos) +{ + if (count) { + if (!nowayout) { + size_t i; + + adv_expect_close = 0; + + for (i = 0; i != count; i++) { + char c; + if (get_user(c, buf + i)) + return -EFAULT; + if (c == 'V') + adv_expect_close = 42; + } + } + advwdt_ping(); + } + return count; +} + +static long advwdt_ioctl(struct file *file, unsigned int cmd, unsigned long arg) +{ + int new_timeout; + void __user *argp = (void __user *)arg; + int __user *p = argp; + static const struct watchdog_info ident = { + .options = WDIOF_KEEPALIVEPING | + WDIOF_SETTIMEOUT | + WDIOF_MAGICCLOSE, + .firmware_version = 1, + .identity = WATCHDOG_NAME, + }; + + switch (cmd) { + case WDIOC_GETSUPPORT: + if (copy_to_user(argp, &ident, sizeof(ident))) + return -EFAULT; + break; + + case WDIOC_GETSTATUS: + case WDIOC_GETBOOTSTATUS: + return put_user(0, p); + + case WDIOC_SETOPTIONS: + { + int options, retval = -EINVAL; + + if (get_user(options, p)) + return -EFAULT; + if (options & WDIOS_DISABLECARD) { + advwdt_disable(); + retval = 0; + } + if (options & WDIOS_ENABLECARD) { + advwdt_ping(); + retval = 0; + } + return retval; + } + case WDIOC_KEEPALIVE: + advwdt_ping(); + break; + + case WDIOC_SETTIMEOUT: + if (get_user(new_timeout, p)) + return -EFAULT; + if (advwdt_set_heartbeat(new_timeout)) + return -EINVAL; + advwdt_ping(); + /* fall through */ + case WDIOC_GETTIMEOUT: + return put_user(timeout, p); + default: + return -ENOTTY; + } + return 0; +} + +static int advwdt_open(struct inode *inode, struct file *file) +{ + if (test_and_set_bit(0, &advwdt_is_open)) + return -EBUSY; + /* + * Activate + */ + + advwdt_ping(); + return nonseekable_open(inode, file); +} + +static int advwdt_close(struct inode *inode, struct file *file) +{ + if (adv_expect_close == 42) { + advwdt_disable(); + } else { + pr_crit("Unexpected close, not stopping watchdog!\n"); + advwdt_ping(); + } + clear_bit(0, &advwdt_is_open); + adv_expect_close = 0; + return 0; +} + +/* + * Kernel Interfaces + */ + +static const struct file_operations advwdt_fops = { + .owner = THIS_MODULE, + .llseek = no_llseek, + .write = advwdt_write, + .unlocked_ioctl = advwdt_ioctl, + .open = advwdt_open, + .release = advwdt_close, +}; + +static struct miscdevice advwdt_miscdev = { + .minor = WATCHDOG_MINOR, + .name = "watchdog", + .fops = &advwdt_fops, +}; + +/* + * Init & exit routines + */ + +static int __init advwdt_probe(struct platform_device *dev) +{ + int ret; + + if (wdt_stop != wdt_start) { + if (!request_region(wdt_stop, 1, WATCHDOG_NAME)) { + pr_err("I/O address 0x%04x already in use\n", + wdt_stop); + ret = -EIO; + goto out; + } + } + + if (!request_region(wdt_start, 1, WATCHDOG_NAME)) { + pr_err("I/O address 0x%04x already in use\n", wdt_start); + ret = -EIO; + goto unreg_stop; + } + + /* Check that the heartbeat value is within it's range ; + * if not reset to the default */ + if (advwdt_set_heartbeat(timeout)) { + advwdt_set_heartbeat(WATCHDOG_TIMEOUT); + pr_info("timeout value must be 1<=x<=63, using %d\n", timeout); + } + + ret = misc_register(&advwdt_miscdev); + if (ret != 0) { + pr_err("cannot register miscdev on minor=%d (err=%d)\n", + WATCHDOG_MINOR, ret); + goto unreg_regions; + } + pr_info("initialized. timeout=%d sec (nowayout=%d)\n", + timeout, nowayout); +out: + return ret; +unreg_regions: + release_region(wdt_start, 1); +unreg_stop: + if (wdt_stop != wdt_start) + release_region(wdt_stop, 1); + goto out; +} + +static int advwdt_remove(struct platform_device *dev) +{ + misc_deregister(&advwdt_miscdev); + release_region(wdt_start, 1); + if (wdt_stop != wdt_start) + release_region(wdt_stop, 1); + + return 0; +} + +static void advwdt_shutdown(struct platform_device *dev) +{ + /* Turn the WDT off if we have a soft shutdown */ + advwdt_disable(); +} + +static struct platform_driver advwdt_driver = { + .remove = advwdt_remove, + .shutdown = advwdt_shutdown, + .driver = { + .name = DRV_NAME, + }, +}; + +static int __init advwdt_init(void) +{ + int err; + + pr_info("WDT driver for Advantech single board computer initialising\n"); + + advwdt_platform_device = platform_device_register_simple(DRV_NAME, + -1, NULL, 0); + if (IS_ERR(advwdt_platform_device)) + return PTR_ERR(advwdt_platform_device); + + err = platform_driver_probe(&advwdt_driver, advwdt_probe); + if (err) + goto unreg_platform_device; + + return 0; + +unreg_platform_device: + platform_device_unregister(advwdt_platform_device); + return err; +} + +static void __exit advwdt_exit(void) +{ + platform_device_unregister(advwdt_platform_device); + platform_driver_unregister(&advwdt_driver); + pr_info("Watchdog Module Unloaded\n"); +} + +module_init(advwdt_init); +module_exit(advwdt_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Marek Michalkiewicz <marekm@linux.org.pl>"); +MODULE_DESCRIPTION("Advantech Single Board Computer WDT driver"); diff --git a/drivers/watchdog/alim1535_wdt.c b/drivers/watchdog/alim1535_wdt.c new file mode 100644 index 000000000..60f0c2eb8 --- /dev/null +++ b/drivers/watchdog/alim1535_wdt.c @@ -0,0 +1,454 @@ +/* + * Watchdog for the 7101 PMU version found in the ALi M1535 chipsets + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/types.h> +#include <linux/miscdevice.h> +#include <linux/watchdog.h> +#include <linux/ioport.h> +#include <linux/notifier.h> +#include <linux/reboot.h> +#include <linux/init.h> +#include <linux/fs.h> +#include <linux/pci.h> +#include <linux/uaccess.h> +#include <linux/io.h> + +#define WATCHDOG_NAME "ALi_M1535" +#define WATCHDOG_TIMEOUT 60 /* 60 sec default timeout */ + +/* internal variables */ +static unsigned long ali_is_open; +static char ali_expect_release; +static struct pci_dev *ali_pci; +static u32 ali_timeout_bits; /* stores the computed timeout */ +static DEFINE_SPINLOCK(ali_lock); /* Guards the hardware */ + +/* module parameters */ +static int timeout = WATCHDOG_TIMEOUT; +module_param(timeout, int, 0); +MODULE_PARM_DESC(timeout, + "Watchdog timeout in seconds. (0 < timeout < 18000, default=" + __MODULE_STRING(WATCHDOG_TIMEOUT) ")"); + +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); +MODULE_PARM_DESC(nowayout, + "Watchdog cannot be stopped once started (default=" + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); + +/* + * ali_start - start watchdog countdown + * + * Starts the timer running providing the timer has a counter + * configuration set. + */ + +static void ali_start(void) +{ + u32 val; + + spin_lock(&ali_lock); + + pci_read_config_dword(ali_pci, 0xCC, &val); + val &= ~0x3F; /* Mask count */ + val |= (1 << 25) | ali_timeout_bits; + pci_write_config_dword(ali_pci, 0xCC, val); + + spin_unlock(&ali_lock); +} + +/* + * ali_stop - stop the timer countdown + * + * Stop the ALi watchdog countdown + */ + +static void ali_stop(void) +{ + u32 val; + + spin_lock(&ali_lock); + + pci_read_config_dword(ali_pci, 0xCC, &val); + val &= ~0x3F; /* Mask count to zero (disabled) */ + val &= ~(1 << 25); /* and for safety mask the reset enable */ + pci_write_config_dword(ali_pci, 0xCC, val); + + spin_unlock(&ali_lock); +} + +/* + * ali_keepalive - send a keepalive to the watchdog + * + * Send a keepalive to the timer (actually we restart the timer). + */ + +static void ali_keepalive(void) +{ + ali_start(); +} + +/* + * ali_settimer - compute the timer reload value + * @t: time in seconds + * + * Computes the timeout values needed + */ + +static int ali_settimer(int t) +{ + if (t < 0) + return -EINVAL; + else if (t < 60) + ali_timeout_bits = t|(1 << 6); + else if (t < 3600) + ali_timeout_bits = (t / 60)|(1 << 7); + else if (t < 18000) + ali_timeout_bits = (t / 300)|(1 << 6)|(1 << 7); + else + return -EINVAL; + + timeout = t; + return 0; +} + +/* + * /dev/watchdog handling + */ + +/* + * ali_write - writes to ALi watchdog + * @file: file from VFS + * @data: user address of data + * @len: length of data + * @ppos: pointer to the file offset + * + * Handle a write to the ALi watchdog. Writing to the file pings + * the watchdog and resets it. Writing the magic 'V' sequence allows + * the next close to turn off the watchdog. + */ + +static ssize_t ali_write(struct file *file, const char __user *data, + size_t len, loff_t *ppos) +{ + /* See if we got the magic character 'V' and reload the timer */ + if (len) { + if (!nowayout) { + size_t i; + + /* note: just in case someone wrote the + magic character five months ago... */ + ali_expect_release = 0; + + /* scan to see whether or not we got + the magic character */ + for (i = 0; i != len; i++) { + char c; + if (get_user(c, data + i)) + return -EFAULT; + if (c == 'V') + ali_expect_release = 42; + } + } + + /* someone wrote to us, we should reload the timer */ + ali_start(); + } + return len; +} + +/* + * ali_ioctl - handle watchdog ioctls + * @file: VFS file pointer + * @cmd: ioctl number + * @arg: arguments to the ioctl + * + * Handle the watchdog ioctls supported by the ALi driver. Really + * we want an extension to enable irq ack monitoring and the like + */ + +static long ali_ioctl(struct file *file, unsigned int cmd, unsigned long arg) +{ + void __user *argp = (void __user *)arg; + int __user *p = argp; + static const struct watchdog_info ident = { + .options = WDIOF_KEEPALIVEPING | + WDIOF_SETTIMEOUT | + WDIOF_MAGICCLOSE, + .firmware_version = 0, + .identity = "ALi M1535 WatchDog Timer", + }; + + switch (cmd) { + case WDIOC_GETSUPPORT: + return copy_to_user(argp, &ident, sizeof(ident)) ? -EFAULT : 0; + + case WDIOC_GETSTATUS: + case WDIOC_GETBOOTSTATUS: + return put_user(0, p); + case WDIOC_SETOPTIONS: + { + int new_options, retval = -EINVAL; + + if (get_user(new_options, p)) + return -EFAULT; + if (new_options & WDIOS_DISABLECARD) { + ali_stop(); + retval = 0; + } + if (new_options & WDIOS_ENABLECARD) { + ali_start(); + retval = 0; + } + return retval; + } + case WDIOC_KEEPALIVE: + ali_keepalive(); + return 0; + case WDIOC_SETTIMEOUT: + { + int new_timeout; + if (get_user(new_timeout, p)) + return -EFAULT; + if (ali_settimer(new_timeout)) + return -EINVAL; + ali_keepalive(); + } + /* fall through */ + case WDIOC_GETTIMEOUT: + return put_user(timeout, p); + default: + return -ENOTTY; + } +} + +/* + * ali_open - handle open of ali watchdog + * @inode: inode from VFS + * @file: file from VFS + * + * Open the ALi watchdog device. Ensure only one person opens it + * at a time. Also start the watchdog running. + */ + +static int ali_open(struct inode *inode, struct file *file) +{ + /* /dev/watchdog can only be opened once */ + if (test_and_set_bit(0, &ali_is_open)) + return -EBUSY; + + /* Activate */ + ali_start(); + return nonseekable_open(inode, file); +} + +/* + * ali_release - close an ALi watchdog + * @inode: inode from VFS + * @file: file from VFS + * + * Close the ALi watchdog device. Actual shutdown of the timer + * only occurs if the magic sequence has been set. + */ + +static int ali_release(struct inode *inode, struct file *file) +{ + /* + * Shut off the timer. + */ + if (ali_expect_release == 42) + ali_stop(); + else { + pr_crit("Unexpected close, not stopping watchdog!\n"); + ali_keepalive(); + } + clear_bit(0, &ali_is_open); + ali_expect_release = 0; + return 0; +} + +/* + * ali_notify_sys - System down notifier + * + * Notifier for system down + */ + + +static int ali_notify_sys(struct notifier_block *this, + unsigned long code, void *unused) +{ + if (code == SYS_DOWN || code == SYS_HALT) + ali_stop(); /* Turn the WDT off */ + return NOTIFY_DONE; +} + +/* + * Data for PCI driver interface + * + * This data only exists for exporting the supported + * PCI ids via MODULE_DEVICE_TABLE. We do not actually + * register a pci_driver, because someone else might one day + * want to register another driver on the same PCI id. + */ + +static const struct pci_device_id ali_pci_tbl[] __used = { + { PCI_VENDOR_ID_AL, 0x1533, PCI_ANY_ID, PCI_ANY_ID,}, + { PCI_VENDOR_ID_AL, 0x1535, PCI_ANY_ID, PCI_ANY_ID,}, + { 0, }, +}; +MODULE_DEVICE_TABLE(pci, ali_pci_tbl); + +/* + * ali_find_watchdog - find a 1535 and 7101 + * + * Scans the PCI hardware for a 1535 series bridge and matching 7101 + * watchdog device. This may be overtight but it is better to be safe + */ + +static int __init ali_find_watchdog(void) +{ + struct pci_dev *pdev; + u32 wdog; + + /* Check for a 1533/1535 series bridge */ + pdev = pci_get_device(PCI_VENDOR_ID_AL, 0x1535, NULL); + if (pdev == NULL) + pdev = pci_get_device(PCI_VENDOR_ID_AL, 0x1533, NULL); + if (pdev == NULL) + return -ENODEV; + pci_dev_put(pdev); + + /* Check for the a 7101 PMU */ + pdev = pci_get_device(PCI_VENDOR_ID_AL, 0x7101, NULL); + if (pdev == NULL) + return -ENODEV; + + if (pci_enable_device(pdev)) { + pci_dev_put(pdev); + return -EIO; + } + + ali_pci = pdev; + + /* + * Initialize the timer bits + */ + pci_read_config_dword(pdev, 0xCC, &wdog); + + /* Timer bits */ + wdog &= ~0x3F; + /* Issued events */ + wdog &= ~((1 << 27)|(1 << 26)|(1 << 25)|(1 << 24)); + /* No monitor bits */ + wdog &= ~((1 << 16)|(1 << 13)|(1 << 12)|(1 << 11)|(1 << 10)|(1 << 9)); + + pci_write_config_dword(pdev, 0xCC, wdog); + + return 0; +} + +/* + * Kernel Interfaces + */ + +static const struct file_operations ali_fops = { + .owner = THIS_MODULE, + .llseek = no_llseek, + .write = ali_write, + .unlocked_ioctl = ali_ioctl, + .open = ali_open, + .release = ali_release, +}; + +static struct miscdevice ali_miscdev = { + .minor = WATCHDOG_MINOR, + .name = "watchdog", + .fops = &ali_fops, +}; + +static struct notifier_block ali_notifier = { + .notifier_call = ali_notify_sys, +}; + +/* + * watchdog_init - module initialiser + * + * Scan for a suitable watchdog and if so initialize it. Return an error + * if we cannot, the error causes the module to unload + */ + +static int __init watchdog_init(void) +{ + int ret; + + /* Check whether or not the hardware watchdog is there */ + if (ali_find_watchdog() != 0) + return -ENODEV; + + /* Check that the timeout value is within it's range; + if not reset to the default */ + if (timeout < 1 || timeout >= 18000) { + timeout = WATCHDOG_TIMEOUT; + pr_info("timeout value must be 0 < timeout < 18000, using %d\n", + timeout); + } + + /* Calculate the watchdog's timeout */ + ali_settimer(timeout); + + ret = register_reboot_notifier(&ali_notifier); + if (ret != 0) { + pr_err("cannot register reboot notifier (err=%d)\n", ret); + goto out; + } + + ret = misc_register(&ali_miscdev); + if (ret != 0) { + pr_err("cannot register miscdev on minor=%d (err=%d)\n", + WATCHDOG_MINOR, ret); + goto unreg_reboot; + } + + pr_info("initialized. timeout=%d sec (nowayout=%d)\n", + timeout, nowayout); + +out: + return ret; +unreg_reboot: + unregister_reboot_notifier(&ali_notifier); + goto out; +} + +/* + * watchdog_exit - module de-initialiser + * + * Called while unloading a successfully installed watchdog module. + */ + +static void __exit watchdog_exit(void) +{ + /* Stop the timer before we leave */ + ali_stop(); + + /* Deregister */ + misc_deregister(&ali_miscdev); + unregister_reboot_notifier(&ali_notifier); + pci_dev_put(ali_pci); +} + +module_init(watchdog_init); +module_exit(watchdog_exit); + +MODULE_AUTHOR("Alan Cox"); +MODULE_DESCRIPTION("ALi M1535 PMU Watchdog Timer driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/watchdog/alim7101_wdt.c b/drivers/watchdog/alim7101_wdt.c new file mode 100644 index 000000000..12f7ea62d --- /dev/null +++ b/drivers/watchdog/alim7101_wdt.c @@ -0,0 +1,449 @@ +/* + * ALi M7101 PMU Computer Watchdog Timer driver + * + * Based on w83877f_wdt.c by Scott Jennings <linuxdrivers@oro.net> + * and the Cobalt kernel WDT timer driver by Tim Hockin + * <thockin@cobaltnet.com> + * + * (c)2002 Steve Hill <steve@navaho.co.uk> + * + * This WDT driver is different from most other Linux WDT + * drivers in that the driver will ping the watchdog by itself, + * because this particular WDT has a very short timeout (1.6 + * seconds) and it would be insane to count on any userspace + * daemon always getting scheduled within that time frame. + * + * Additions: + * Aug 23, 2004 - Added use_gpio module parameter for use on revision a1d PMUs + * found on very old cobalt hardware. + * -- Mike Waychison <michael.waychison@sun.com> + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/types.h> +#include <linux/timer.h> +#include <linux/miscdevice.h> +#include <linux/watchdog.h> +#include <linux/ioport.h> +#include <linux/notifier.h> +#include <linux/reboot.h> +#include <linux/init.h> +#include <linux/fs.h> +#include <linux/pci.h> +#include <linux/io.h> +#include <linux/uaccess.h> + + +#define WDT_ENABLE 0x9C +#define WDT_DISABLE 0x8C + +#define ALI_7101_WDT 0x92 +#define ALI_7101_GPIO 0x7D +#define ALI_7101_GPIO_O 0x7E +#define ALI_WDT_ARM 0x01 + +/* + * We're going to use a 1 second timeout. + * If we reset the watchdog every ~250ms we should be safe. */ + +#define WDT_INTERVAL (HZ/4+1) + +/* + * We must not require too good response from the userspace daemon. + * Here we require the userspace daemon to send us a heartbeat + * char to /dev/watchdog every 30 seconds. + */ + +#define WATCHDOG_TIMEOUT 30 /* 30 sec default timeout */ +/* in seconds, will be multiplied by HZ to get seconds to wait for a ping */ +static int timeout = WATCHDOG_TIMEOUT; +module_param(timeout, int, 0); +MODULE_PARM_DESC(timeout, + "Watchdog timeout in seconds. (1<=timeout<=3600, default=" + __MODULE_STRING(WATCHDOG_TIMEOUT) ")"); + +static int use_gpio; /* Use the pic (for a1d revision alim7101) */ +module_param(use_gpio, int, 0); +MODULE_PARM_DESC(use_gpio, + "Use the gpio watchdog (required by old cobalt boards)."); + +static void wdt_timer_ping(struct timer_list *); +static DEFINE_TIMER(timer, wdt_timer_ping); +static unsigned long next_heartbeat; +static unsigned long wdt_is_open; +static char wdt_expect_close; +static struct pci_dev *alim7101_pmu; + +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); +MODULE_PARM_DESC(nowayout, + "Watchdog cannot be stopped once started (default=" + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); + +/* + * Whack the dog + */ + +static void wdt_timer_ping(struct timer_list *unused) +{ + /* If we got a heartbeat pulse within the WDT_US_INTERVAL + * we agree to ping the WDT + */ + char tmp; + + if (time_before(jiffies, next_heartbeat)) { + /* Ping the WDT (this is actually a disarm/arm sequence) */ + pci_read_config_byte(alim7101_pmu, 0x92, &tmp); + pci_write_config_byte(alim7101_pmu, + ALI_7101_WDT, (tmp & ~ALI_WDT_ARM)); + pci_write_config_byte(alim7101_pmu, + ALI_7101_WDT, (tmp | ALI_WDT_ARM)); + if (use_gpio) { + pci_read_config_byte(alim7101_pmu, + ALI_7101_GPIO_O, &tmp); + pci_write_config_byte(alim7101_pmu, + ALI_7101_GPIO_O, tmp | 0x20); + pci_write_config_byte(alim7101_pmu, + ALI_7101_GPIO_O, tmp & ~0x20); + } + } else { + pr_warn("Heartbeat lost! Will not ping the watchdog\n"); + } + /* Re-set the timer interval */ + mod_timer(&timer, jiffies + WDT_INTERVAL); +} + +/* + * Utility routines + */ + +static void wdt_change(int writeval) +{ + char tmp; + + pci_read_config_byte(alim7101_pmu, ALI_7101_WDT, &tmp); + if (writeval == WDT_ENABLE) { + pci_write_config_byte(alim7101_pmu, + ALI_7101_WDT, (tmp | ALI_WDT_ARM)); + if (use_gpio) { + pci_read_config_byte(alim7101_pmu, + ALI_7101_GPIO_O, &tmp); + pci_write_config_byte(alim7101_pmu, + ALI_7101_GPIO_O, tmp & ~0x20); + } + + } else { + pci_write_config_byte(alim7101_pmu, + ALI_7101_WDT, (tmp & ~ALI_WDT_ARM)); + if (use_gpio) { + pci_read_config_byte(alim7101_pmu, + ALI_7101_GPIO_O, &tmp); + pci_write_config_byte(alim7101_pmu, + ALI_7101_GPIO_O, tmp | 0x20); + } + } +} + +static void wdt_startup(void) +{ + next_heartbeat = jiffies + (timeout * HZ); + + /* We must enable before we kick off the timer in case the timer + occurs as we ping it */ + + wdt_change(WDT_ENABLE); + + /* Start the timer */ + mod_timer(&timer, jiffies + WDT_INTERVAL); + + pr_info("Watchdog timer is now enabled\n"); +} + +static void wdt_turnoff(void) +{ + /* Stop the timer */ + del_timer_sync(&timer); + wdt_change(WDT_DISABLE); + pr_info("Watchdog timer is now disabled...\n"); +} + +static void wdt_keepalive(void) +{ + /* user land ping */ + next_heartbeat = jiffies + (timeout * HZ); +} + +/* + * /dev/watchdog handling + */ + +static ssize_t fop_write(struct file *file, const char __user *buf, + size_t count, loff_t *ppos) +{ + /* See if we got the magic character 'V' and reload the timer */ + if (count) { + if (!nowayout) { + size_t ofs; + + /* note: just in case someone wrote the magic character + * five months ago... */ + wdt_expect_close = 0; + + /* now scan */ + for (ofs = 0; ofs != count; ofs++) { + char c; + if (get_user(c, buf + ofs)) + return -EFAULT; + if (c == 'V') + wdt_expect_close = 42; + } + } + /* someone wrote to us, we should restart timer */ + wdt_keepalive(); + } + return count; +} + +static int fop_open(struct inode *inode, struct file *file) +{ + /* Just in case we're already talking to someone... */ + if (test_and_set_bit(0, &wdt_is_open)) + return -EBUSY; + /* Good, fire up the show */ + wdt_startup(); + return nonseekable_open(inode, file); +} + +static int fop_close(struct inode *inode, struct file *file) +{ + if (wdt_expect_close == 42) + wdt_turnoff(); + else { + /* wim: shouldn't there be a: del_timer(&timer); */ + pr_crit("device file closed unexpectedly. Will not stop the WDT!\n"); + } + clear_bit(0, &wdt_is_open); + wdt_expect_close = 0; + return 0; +} + +static long fop_ioctl(struct file *file, unsigned int cmd, unsigned long arg) +{ + void __user *argp = (void __user *)arg; + int __user *p = argp; + static const struct watchdog_info ident = { + .options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT + | WDIOF_MAGICCLOSE, + .firmware_version = 1, + .identity = "ALiM7101", + }; + + switch (cmd) { + case WDIOC_GETSUPPORT: + return copy_to_user(argp, &ident, sizeof(ident)) ? -EFAULT : 0; + case WDIOC_GETSTATUS: + case WDIOC_GETBOOTSTATUS: + return put_user(0, p); + case WDIOC_SETOPTIONS: + { + int new_options, retval = -EINVAL; + + if (get_user(new_options, p)) + return -EFAULT; + if (new_options & WDIOS_DISABLECARD) { + wdt_turnoff(); + retval = 0; + } + if (new_options & WDIOS_ENABLECARD) { + wdt_startup(); + retval = 0; + } + return retval; + } + case WDIOC_KEEPALIVE: + wdt_keepalive(); + return 0; + case WDIOC_SETTIMEOUT: + { + int new_timeout; + + if (get_user(new_timeout, p)) + return -EFAULT; + /* arbitrary upper limit */ + if (new_timeout < 1 || new_timeout > 3600) + return -EINVAL; + timeout = new_timeout; + wdt_keepalive(); + /* Fall through */ + } + case WDIOC_GETTIMEOUT: + return put_user(timeout, p); + default: + return -ENOTTY; + } +} + +static const struct file_operations wdt_fops = { + .owner = THIS_MODULE, + .llseek = no_llseek, + .write = fop_write, + .open = fop_open, + .release = fop_close, + .unlocked_ioctl = fop_ioctl, +}; + +static struct miscdevice wdt_miscdev = { + .minor = WATCHDOG_MINOR, + .name = "watchdog", + .fops = &wdt_fops, +}; + +static int wdt_restart_handle(struct notifier_block *this, unsigned long mode, + void *cmd) +{ + /* + * Cobalt devices have no way of rebooting themselves other + * than getting the watchdog to pull reset, so we restart the + * watchdog on reboot with no heartbeat. + */ + wdt_change(WDT_ENABLE); + + /* loop until the watchdog fires */ + while (true) + ; + + return NOTIFY_DONE; +} + +static struct notifier_block wdt_restart_handler = { + .notifier_call = wdt_restart_handle, + .priority = 128, +}; + +/* + * Notifier for system down + */ + +static int wdt_notify_sys(struct notifier_block *this, + unsigned long code, void *unused) +{ + if (code == SYS_DOWN || code == SYS_HALT) + wdt_turnoff(); + + return NOTIFY_DONE; +} + +/* + * The WDT needs to learn about soft shutdowns in order to + * turn the timebomb registers off. + */ + +static struct notifier_block wdt_notifier = { + .notifier_call = wdt_notify_sys, +}; + +static void __exit alim7101_wdt_unload(void) +{ + wdt_turnoff(); + /* Deregister */ + misc_deregister(&wdt_miscdev); + unregister_reboot_notifier(&wdt_notifier); + unregister_restart_handler(&wdt_restart_handler); + pci_dev_put(alim7101_pmu); +} + +static int __init alim7101_wdt_init(void) +{ + int rc = -EBUSY; + struct pci_dev *ali1543_south; + char tmp; + + pr_info("Steve Hill <steve@navaho.co.uk>\n"); + alim7101_pmu = pci_get_device(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M7101, + NULL); + if (!alim7101_pmu) { + pr_info("ALi M7101 PMU not present - WDT not set\n"); + return -EBUSY; + } + + /* Set the WDT in the PMU to 1 second */ + pci_write_config_byte(alim7101_pmu, ALI_7101_WDT, 0x02); + + ali1543_south = pci_get_device(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1533, + NULL); + if (!ali1543_south) { + pr_info("ALi 1543 South-Bridge not present - WDT not set\n"); + goto err_out; + } + pci_read_config_byte(ali1543_south, 0x5e, &tmp); + pci_dev_put(ali1543_south); + if ((tmp & 0x1e) == 0x00) { + if (!use_gpio) { + pr_info("Detected old alim7101 revision 'a1d'. If this is a cobalt board, set the 'use_gpio' module parameter.\n"); + goto err_out; + } + nowayout = 1; + } else if ((tmp & 0x1e) != 0x12 && (tmp & 0x1e) != 0x00) { + pr_info("ALi 1543 South-Bridge does not have the correct revision number (???1001?) - WDT not set\n"); + goto err_out; + } + + if (timeout < 1 || timeout > 3600) { + /* arbitrary upper limit */ + timeout = WATCHDOG_TIMEOUT; + pr_info("timeout value must be 1 <= x <= 3600, using %d\n", + timeout); + } + + rc = register_reboot_notifier(&wdt_notifier); + if (rc) { + pr_err("cannot register reboot notifier (err=%d)\n", rc); + goto err_out; + } + + rc = register_restart_handler(&wdt_restart_handler); + if (rc) { + pr_err("cannot register restart handler (err=%d)\n", rc); + goto err_out_reboot; + } + + rc = misc_register(&wdt_miscdev); + if (rc) { + pr_err("cannot register miscdev on minor=%d (err=%d)\n", + wdt_miscdev.minor, rc); + goto err_out_restart; + } + + if (nowayout) + __module_get(THIS_MODULE); + + pr_info("WDT driver for ALi M7101 initialised. timeout=%d sec (nowayout=%d)\n", + timeout, nowayout); + return 0; + +err_out_restart: + unregister_restart_handler(&wdt_restart_handler); +err_out_reboot: + unregister_reboot_notifier(&wdt_notifier); +err_out: + pci_dev_put(alim7101_pmu); + return rc; +} + +module_init(alim7101_wdt_init); +module_exit(alim7101_wdt_unload); + +static const struct pci_device_id alim7101_pci_tbl[] __used = { + { PCI_DEVICE(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1533) }, + { PCI_DEVICE(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M7101) }, + { } +}; + +MODULE_DEVICE_TABLE(pci, alim7101_pci_tbl); + +MODULE_AUTHOR("Steve Hill"); +MODULE_DESCRIPTION("ALi M7101 PMU Computer Watchdog Timer driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/watchdog/ar7_wdt.c b/drivers/watchdog/ar7_wdt.c new file mode 100644 index 000000000..ee1ab12ab --- /dev/null +++ b/drivers/watchdog/ar7_wdt.c @@ -0,0 +1,319 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * drivers/watchdog/ar7_wdt.c + * + * Copyright (C) 2007 Nicolas Thill <nico@openwrt.org> + * Copyright (c) 2005 Enrik Berkhan <Enrik.Berkhan@akk.org> + * + * Some code taken from: + * National Semiconductor SCx200 Watchdog support + * Copyright (c) 2001,2002 Christer Weinigel <wingel@nano-system.com> + * + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/errno.h> +#include <linux/miscdevice.h> +#include <linux/platform_device.h> +#include <linux/watchdog.h> +#include <linux/fs.h> +#include <linux/ioport.h> +#include <linux/io.h> +#include <linux/uaccess.h> +#include <linux/clk.h> + +#include <asm/addrspace.h> +#include <asm/mach-ar7/ar7.h> + +#define LONGNAME "TI AR7 Watchdog Timer" + +MODULE_AUTHOR("Nicolas Thill <nico@openwrt.org>"); +MODULE_DESCRIPTION(LONGNAME); +MODULE_LICENSE("GPL"); + +static int margin = 60; +module_param(margin, int, 0); +MODULE_PARM_DESC(margin, "Watchdog margin in seconds"); + +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); +MODULE_PARM_DESC(nowayout, "Disable watchdog shutdown on close"); + +#define READ_REG(x) readl((void __iomem *)&(x)) +#define WRITE_REG(x, v) writel((v), (void __iomem *)&(x)) + +struct ar7_wdt { + u32 kick_lock; + u32 kick; + u32 change_lock; + u32 change; + u32 disable_lock; + u32 disable; + u32 prescale_lock; + u32 prescale; +}; + +static unsigned long wdt_is_open; +static unsigned expect_close; +static DEFINE_SPINLOCK(wdt_lock); + +/* XXX currently fixed, allows max margin ~68.72 secs */ +#define prescale_value 0xffff + +/* Resource of the WDT registers */ +static struct resource *ar7_regs_wdt; +/* Pointer to the remapped WDT IO space */ +static struct ar7_wdt *ar7_wdt; + +static struct clk *vbus_clk; + +static void ar7_wdt_kick(u32 value) +{ + WRITE_REG(ar7_wdt->kick_lock, 0x5555); + if ((READ_REG(ar7_wdt->kick_lock) & 3) == 1) { + WRITE_REG(ar7_wdt->kick_lock, 0xaaaa); + if ((READ_REG(ar7_wdt->kick_lock) & 3) == 3) { + WRITE_REG(ar7_wdt->kick, value); + return; + } + } + pr_err("failed to unlock WDT kick reg\n"); +} + +static void ar7_wdt_prescale(u32 value) +{ + WRITE_REG(ar7_wdt->prescale_lock, 0x5a5a); + if ((READ_REG(ar7_wdt->prescale_lock) & 3) == 1) { + WRITE_REG(ar7_wdt->prescale_lock, 0xa5a5); + if ((READ_REG(ar7_wdt->prescale_lock) & 3) == 3) { + WRITE_REG(ar7_wdt->prescale, value); + return; + } + } + pr_err("failed to unlock WDT prescale reg\n"); +} + +static void ar7_wdt_change(u32 value) +{ + WRITE_REG(ar7_wdt->change_lock, 0x6666); + if ((READ_REG(ar7_wdt->change_lock) & 3) == 1) { + WRITE_REG(ar7_wdt->change_lock, 0xbbbb); + if ((READ_REG(ar7_wdt->change_lock) & 3) == 3) { + WRITE_REG(ar7_wdt->change, value); + return; + } + } + pr_err("failed to unlock WDT change reg\n"); +} + +static void ar7_wdt_disable(u32 value) +{ + WRITE_REG(ar7_wdt->disable_lock, 0x7777); + if ((READ_REG(ar7_wdt->disable_lock) & 3) == 1) { + WRITE_REG(ar7_wdt->disable_lock, 0xcccc); + if ((READ_REG(ar7_wdt->disable_lock) & 3) == 2) { + WRITE_REG(ar7_wdt->disable_lock, 0xdddd); + if ((READ_REG(ar7_wdt->disable_lock) & 3) == 3) { + WRITE_REG(ar7_wdt->disable, value); + return; + } + } + } + pr_err("failed to unlock WDT disable reg\n"); +} + +static void ar7_wdt_update_margin(int new_margin) +{ + u32 change; + u32 vbus_rate; + + vbus_rate = clk_get_rate(vbus_clk); + change = new_margin * (vbus_rate / prescale_value); + if (change < 1) + change = 1; + if (change > 0xffff) + change = 0xffff; + ar7_wdt_change(change); + margin = change * prescale_value / vbus_rate; + pr_info("timer margin %d seconds (prescale %d, change %d, freq %d)\n", + margin, prescale_value, change, vbus_rate); +} + +static void ar7_wdt_enable_wdt(void) +{ + pr_debug("enabling watchdog timer\n"); + ar7_wdt_disable(1); + ar7_wdt_kick(1); +} + +static void ar7_wdt_disable_wdt(void) +{ + pr_debug("disabling watchdog timer\n"); + ar7_wdt_disable(0); +} + +static int ar7_wdt_open(struct inode *inode, struct file *file) +{ + /* only allow one at a time */ + if (test_and_set_bit(0, &wdt_is_open)) + return -EBUSY; + ar7_wdt_enable_wdt(); + expect_close = 0; + + return nonseekable_open(inode, file); +} + +static int ar7_wdt_release(struct inode *inode, struct file *file) +{ + if (!expect_close) + pr_warn("watchdog device closed unexpectedly, will not disable the watchdog timer\n"); + else if (!nowayout) + ar7_wdt_disable_wdt(); + clear_bit(0, &wdt_is_open); + return 0; +} + +static ssize_t ar7_wdt_write(struct file *file, const char *data, + size_t len, loff_t *ppos) +{ + /* check for a magic close character */ + if (len) { + size_t i; + + spin_lock(&wdt_lock); + ar7_wdt_kick(1); + spin_unlock(&wdt_lock); + + expect_close = 0; + for (i = 0; i < len; ++i) { + char c; + if (get_user(c, data + i)) + return -EFAULT; + if (c == 'V') + expect_close = 1; + } + + } + return len; +} + +static long ar7_wdt_ioctl(struct file *file, + unsigned int cmd, unsigned long arg) +{ + static const struct watchdog_info ident = { + .identity = LONGNAME, + .firmware_version = 1, + .options = (WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | + WDIOF_MAGICCLOSE), + }; + int new_margin; + + switch (cmd) { + case WDIOC_GETSUPPORT: + if (copy_to_user((struct watchdog_info *)arg, &ident, + sizeof(ident))) + return -EFAULT; + return 0; + case WDIOC_GETSTATUS: + case WDIOC_GETBOOTSTATUS: + if (put_user(0, (int *)arg)) + return -EFAULT; + return 0; + case WDIOC_KEEPALIVE: + ar7_wdt_kick(1); + return 0; + case WDIOC_SETTIMEOUT: + if (get_user(new_margin, (int *)arg)) + return -EFAULT; + if (new_margin < 1) + return -EINVAL; + + spin_lock(&wdt_lock); + ar7_wdt_update_margin(new_margin); + ar7_wdt_kick(1); + spin_unlock(&wdt_lock); + + case WDIOC_GETTIMEOUT: + if (put_user(margin, (int *)arg)) + return -EFAULT; + return 0; + default: + return -ENOTTY; + } +} + +static const struct file_operations ar7_wdt_fops = { + .owner = THIS_MODULE, + .write = ar7_wdt_write, + .unlocked_ioctl = ar7_wdt_ioctl, + .open = ar7_wdt_open, + .release = ar7_wdt_release, + .llseek = no_llseek, +}; + +static struct miscdevice ar7_wdt_miscdev = { + .minor = WATCHDOG_MINOR, + .name = "watchdog", + .fops = &ar7_wdt_fops, +}; + +static int ar7_wdt_probe(struct platform_device *pdev) +{ + int rc; + + ar7_regs_wdt = + platform_get_resource_byname(pdev, IORESOURCE_MEM, "regs"); + ar7_wdt = devm_ioremap_resource(&pdev->dev, ar7_regs_wdt); + if (IS_ERR(ar7_wdt)) + return PTR_ERR(ar7_wdt); + + vbus_clk = clk_get(NULL, "vbus"); + if (IS_ERR(vbus_clk)) { + pr_err("could not get vbus clock\n"); + return PTR_ERR(vbus_clk); + } + + ar7_wdt_disable_wdt(); + ar7_wdt_prescale(prescale_value); + ar7_wdt_update_margin(margin); + + rc = misc_register(&ar7_wdt_miscdev); + if (rc) { + pr_err("unable to register misc device\n"); + goto out; + } + return 0; + +out: + clk_put(vbus_clk); + vbus_clk = NULL; + return rc; +} + +static int ar7_wdt_remove(struct platform_device *pdev) +{ + misc_deregister(&ar7_wdt_miscdev); + clk_put(vbus_clk); + vbus_clk = NULL; + return 0; +} + +static void ar7_wdt_shutdown(struct platform_device *pdev) +{ + if (!nowayout) + ar7_wdt_disable_wdt(); +} + +static struct platform_driver ar7_wdt_driver = { + .probe = ar7_wdt_probe, + .remove = ar7_wdt_remove, + .shutdown = ar7_wdt_shutdown, + .driver = { + .name = "ar7_wdt", + }, +}; + +module_platform_driver(ar7_wdt_driver); diff --git a/drivers/watchdog/asm9260_wdt.c b/drivers/watchdog/asm9260_wdt.c new file mode 100644 index 000000000..2cf56b459 --- /dev/null +++ b/drivers/watchdog/asm9260_wdt.c @@ -0,0 +1,394 @@ +/* + * Watchdog driver for Alphascale ASM9260. + * + * Copyright (c) 2014 Oleksij Rempel <linux@rempel-privat.de> + * + * Licensed under GPLv2 or later. + */ + +#include <linux/bitops.h> +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/reset.h> +#include <linux/watchdog.h> + +#define CLOCK_FREQ 1000000 + +/* Watchdog Mode register */ +#define HW_WDMOD 0x00 +/* Wake interrupt. Set by HW, can't be cleared. */ +#define BM_MOD_WDINT BIT(3) +/* This bit set if timeout reached. Cleared by SW. */ +#define BM_MOD_WDTOF BIT(2) +/* HW Reset on timeout */ +#define BM_MOD_WDRESET BIT(1) +/* WD enable */ +#define BM_MOD_WDEN BIT(0) + +/* + * Watchdog Timer Constant register + * Minimal value is 0xff, the meaning of this value + * depends on used clock: T = WDCLK * (0xff + 1) * 4 + */ +#define HW_WDTC 0x04 +#define BM_WDTC_MAX(freq) (0x7fffffff / (freq)) + +/* Watchdog Feed register */ +#define HW_WDFEED 0x08 + +/* Watchdog Timer Value register */ +#define HW_WDTV 0x0c + +#define ASM9260_WDT_DEFAULT_TIMEOUT 30 + +enum asm9260_wdt_mode { + HW_RESET, + SW_RESET, + DEBUG, +}; + +struct asm9260_wdt_priv { + struct device *dev; + struct watchdog_device wdd; + struct clk *clk; + struct clk *clk_ahb; + struct reset_control *rst; + + void __iomem *iobase; + int irq; + unsigned long wdt_freq; + enum asm9260_wdt_mode mode; +}; + +static int asm9260_wdt_feed(struct watchdog_device *wdd) +{ + struct asm9260_wdt_priv *priv = watchdog_get_drvdata(wdd); + + iowrite32(0xaa, priv->iobase + HW_WDFEED); + iowrite32(0x55, priv->iobase + HW_WDFEED); + + return 0; +} + +static unsigned int asm9260_wdt_gettimeleft(struct watchdog_device *wdd) +{ + struct asm9260_wdt_priv *priv = watchdog_get_drvdata(wdd); + u32 counter; + + counter = ioread32(priv->iobase + HW_WDTV); + + return counter / priv->wdt_freq; +} + +static int asm9260_wdt_updatetimeout(struct watchdog_device *wdd) +{ + struct asm9260_wdt_priv *priv = watchdog_get_drvdata(wdd); + u32 counter; + + counter = wdd->timeout * priv->wdt_freq; + + iowrite32(counter, priv->iobase + HW_WDTC); + + return 0; +} + +static int asm9260_wdt_enable(struct watchdog_device *wdd) +{ + struct asm9260_wdt_priv *priv = watchdog_get_drvdata(wdd); + u32 mode = 0; + + if (priv->mode == HW_RESET) + mode = BM_MOD_WDRESET; + + iowrite32(BM_MOD_WDEN | mode, priv->iobase + HW_WDMOD); + + asm9260_wdt_updatetimeout(wdd); + + asm9260_wdt_feed(wdd); + + return 0; +} + +static int asm9260_wdt_disable(struct watchdog_device *wdd) +{ + struct asm9260_wdt_priv *priv = watchdog_get_drvdata(wdd); + + /* The only way to disable WD is to reset it. */ + reset_control_assert(priv->rst); + reset_control_deassert(priv->rst); + + return 0; +} + +static int asm9260_wdt_settimeout(struct watchdog_device *wdd, unsigned int to) +{ + wdd->timeout = to; + asm9260_wdt_updatetimeout(wdd); + + return 0; +} + +static void asm9260_wdt_sys_reset(struct asm9260_wdt_priv *priv) +{ + /* init WD if it was not started */ + + iowrite32(BM_MOD_WDEN | BM_MOD_WDRESET, priv->iobase + HW_WDMOD); + + iowrite32(0xff, priv->iobase + HW_WDTC); + /* first pass correct sequence */ + asm9260_wdt_feed(&priv->wdd); + /* + * Then write wrong pattern to the feed to trigger reset + * ASAP. + */ + iowrite32(0xff, priv->iobase + HW_WDFEED); + + mdelay(1000); +} + +static irqreturn_t asm9260_wdt_irq(int irq, void *devid) +{ + struct asm9260_wdt_priv *priv = devid; + u32 stat; + + stat = ioread32(priv->iobase + HW_WDMOD); + if (!(stat & BM_MOD_WDINT)) + return IRQ_NONE; + + if (priv->mode == DEBUG) { + dev_info(priv->dev, "Watchdog Timeout. Do nothing.\n"); + } else { + dev_info(priv->dev, "Watchdog Timeout. Doing SW Reset.\n"); + asm9260_wdt_sys_reset(priv); + } + + return IRQ_HANDLED; +} + +static int asm9260_restart(struct watchdog_device *wdd, unsigned long action, + void *data) +{ + struct asm9260_wdt_priv *priv = watchdog_get_drvdata(wdd); + + asm9260_wdt_sys_reset(priv); + + return 0; +} + +static const struct watchdog_info asm9260_wdt_ident = { + .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING + | WDIOF_MAGICCLOSE, + .identity = "Alphascale asm9260 Watchdog", +}; + +static const struct watchdog_ops asm9260_wdt_ops = { + .owner = THIS_MODULE, + .start = asm9260_wdt_enable, + .stop = asm9260_wdt_disable, + .get_timeleft = asm9260_wdt_gettimeleft, + .ping = asm9260_wdt_feed, + .set_timeout = asm9260_wdt_settimeout, + .restart = asm9260_restart, +}; + +static int asm9260_wdt_get_dt_clks(struct asm9260_wdt_priv *priv) +{ + int err; + unsigned long clk; + + priv->clk = devm_clk_get(priv->dev, "mod"); + if (IS_ERR(priv->clk)) { + dev_err(priv->dev, "Failed to get \"mod\" clk\n"); + return PTR_ERR(priv->clk); + } + + /* configure AHB clock */ + priv->clk_ahb = devm_clk_get(priv->dev, "ahb"); + if (IS_ERR(priv->clk_ahb)) { + dev_err(priv->dev, "Failed to get \"ahb\" clk\n"); + return PTR_ERR(priv->clk_ahb); + } + + err = clk_prepare_enable(priv->clk_ahb); + if (err) { + dev_err(priv->dev, "Failed to enable ahb_clk!\n"); + return err; + } + + err = clk_set_rate(priv->clk, CLOCK_FREQ); + if (err) { + clk_disable_unprepare(priv->clk_ahb); + dev_err(priv->dev, "Failed to set rate!\n"); + return err; + } + + err = clk_prepare_enable(priv->clk); + if (err) { + clk_disable_unprepare(priv->clk_ahb); + dev_err(priv->dev, "Failed to enable clk!\n"); + return err; + } + + /* wdt has internal divider */ + clk = clk_get_rate(priv->clk); + if (!clk) { + clk_disable_unprepare(priv->clk); + clk_disable_unprepare(priv->clk_ahb); + dev_err(priv->dev, "Failed, clk is 0!\n"); + return -EINVAL; + } + + priv->wdt_freq = clk / 2; + + return 0; +} + +static void asm9260_wdt_get_dt_mode(struct asm9260_wdt_priv *priv) +{ + const char *tmp; + int ret; + + /* default mode */ + priv->mode = HW_RESET; + + ret = of_property_read_string(priv->dev->of_node, + "alphascale,mode", &tmp); + if (ret < 0) + return; + + if (!strcmp(tmp, "hw")) + priv->mode = HW_RESET; + else if (!strcmp(tmp, "sw")) + priv->mode = SW_RESET; + else if (!strcmp(tmp, "debug")) + priv->mode = DEBUG; + else + dev_warn(priv->dev, "unknown reset-type: %s. Using default \"hw\" mode.", + tmp); +} + +static int asm9260_wdt_probe(struct platform_device *pdev) +{ + struct asm9260_wdt_priv *priv; + struct watchdog_device *wdd; + struct resource *res; + int ret; + const char * const mode_name[] = { "hw", "sw", "debug", }; + + priv = devm_kzalloc(&pdev->dev, sizeof(struct asm9260_wdt_priv), + GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->dev = &pdev->dev; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + priv->iobase = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(priv->iobase)) + return PTR_ERR(priv->iobase); + + priv->rst = devm_reset_control_get_exclusive(&pdev->dev, "wdt_rst"); + if (IS_ERR(priv->rst)) + return PTR_ERR(priv->rst); + + ret = asm9260_wdt_get_dt_clks(priv); + if (ret) + return ret; + + wdd = &priv->wdd; + wdd->info = &asm9260_wdt_ident; + wdd->ops = &asm9260_wdt_ops; + wdd->min_timeout = 1; + wdd->max_timeout = BM_WDTC_MAX(priv->wdt_freq); + wdd->parent = &pdev->dev; + + watchdog_set_drvdata(wdd, priv); + + /* + * If 'timeout-sec' unspecified in devicetree, assume a 30 second + * default, unless the max timeout is less than 30 seconds, then use + * the max instead. + */ + wdd->timeout = ASM9260_WDT_DEFAULT_TIMEOUT; + watchdog_init_timeout(wdd, 0, &pdev->dev); + + asm9260_wdt_get_dt_mode(priv); + + if (priv->mode != HW_RESET) + priv->irq = platform_get_irq(pdev, 0); + + if (priv->irq > 0) { + /* + * Not all supported platforms specify an interrupt for the + * watchdog, so let's make it optional. + */ + ret = devm_request_irq(&pdev->dev, priv->irq, + asm9260_wdt_irq, 0, pdev->name, priv); + if (ret < 0) + dev_warn(&pdev->dev, "failed to request IRQ\n"); + } + + watchdog_set_restart_priority(wdd, 128); + + ret = watchdog_register_device(wdd); + if (ret) + goto clk_off; + + platform_set_drvdata(pdev, priv); + + dev_info(&pdev->dev, "Watchdog enabled (timeout: %d sec, mode: %s)\n", + wdd->timeout, mode_name[priv->mode]); + return 0; + +clk_off: + clk_disable_unprepare(priv->clk); + clk_disable_unprepare(priv->clk_ahb); + return ret; +} + +static void asm9260_wdt_shutdown(struct platform_device *pdev) +{ + struct asm9260_wdt_priv *priv = platform_get_drvdata(pdev); + + asm9260_wdt_disable(&priv->wdd); +} + +static int asm9260_wdt_remove(struct platform_device *pdev) +{ + struct asm9260_wdt_priv *priv = platform_get_drvdata(pdev); + + asm9260_wdt_disable(&priv->wdd); + + watchdog_unregister_device(&priv->wdd); + + clk_disable_unprepare(priv->clk); + clk_disable_unprepare(priv->clk_ahb); + + return 0; +} + +static const struct of_device_id asm9260_wdt_of_match[] = { + { .compatible = "alphascale,asm9260-wdt"}, + {}, +}; +MODULE_DEVICE_TABLE(of, asm9260_wdt_of_match); + +static struct platform_driver asm9260_wdt_driver = { + .driver = { + .name = "asm9260-wdt", + .of_match_table = asm9260_wdt_of_match, + }, + .probe = asm9260_wdt_probe, + .remove = asm9260_wdt_remove, + .shutdown = asm9260_wdt_shutdown, +}; +module_platform_driver(asm9260_wdt_driver); + +MODULE_DESCRIPTION("asm9260 WatchDog Timer Driver"); +MODULE_AUTHOR("Oleksij Rempel <linux@rempel-privat.de>"); +MODULE_LICENSE("GPL"); diff --git a/drivers/watchdog/aspeed_wdt.c b/drivers/watchdog/aspeed_wdt.c new file mode 100644 index 000000000..814041d4e --- /dev/null +++ b/drivers/watchdog/aspeed_wdt.c @@ -0,0 +1,353 @@ +/* + * Copyright 2016 IBM Corporation + * + * Joel Stanley <joel@jms.id.au> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include <linux/delay.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/watchdog.h> + +struct aspeed_wdt { + struct watchdog_device wdd; + void __iomem *base; + u32 ctrl; +}; + +struct aspeed_wdt_config { + u32 ext_pulse_width_mask; +}; + +static const struct aspeed_wdt_config ast2400_config = { + .ext_pulse_width_mask = 0xff, +}; + +static const struct aspeed_wdt_config ast2500_config = { + .ext_pulse_width_mask = 0xfffff, +}; + +static const struct of_device_id aspeed_wdt_of_table[] = { + { .compatible = "aspeed,ast2400-wdt", .data = &ast2400_config }, + { .compatible = "aspeed,ast2500-wdt", .data = &ast2500_config }, + { .compatible = "aspeed,ast2600-wdt", .data = &ast2500_config }, + { }, +}; +MODULE_DEVICE_TABLE(of, aspeed_wdt_of_table); + +#define WDT_STATUS 0x00 +#define WDT_RELOAD_VALUE 0x04 +#define WDT_RESTART 0x08 +#define WDT_CTRL 0x0C +#define WDT_CTRL_BOOT_SECONDARY BIT(7) +#define WDT_CTRL_RESET_MODE_SOC (0x00 << 5) +#define WDT_CTRL_RESET_MODE_FULL_CHIP (0x01 << 5) +#define WDT_CTRL_RESET_MODE_ARM_CPU (0x10 << 5) +#define WDT_CTRL_1MHZ_CLK BIT(4) +#define WDT_CTRL_WDT_EXT BIT(3) +#define WDT_CTRL_WDT_INTR BIT(2) +#define WDT_CTRL_RESET_SYSTEM BIT(1) +#define WDT_CTRL_ENABLE BIT(0) +#define WDT_TIMEOUT_STATUS 0x10 +#define WDT_TIMEOUT_STATUS_BOOT_SECONDARY BIT(1) + +/* + * WDT_RESET_WIDTH controls the characteristics of the external pulse (if + * enabled), specifically: + * + * * Pulse duration + * * Drive mode: push-pull vs open-drain + * * Polarity: Active high or active low + * + * Pulse duration configuration is available on both the AST2400 and AST2500, + * though the field changes between SoCs: + * + * AST2400: Bits 7:0 + * AST2500: Bits 19:0 + * + * This difference is captured in struct aspeed_wdt_config. + * + * The AST2500 exposes the drive mode and polarity options, but not in a + * regular fashion. For read purposes, bit 31 represents active high or low, + * and bit 30 represents push-pull or open-drain. With respect to write, magic + * values need to be written to the top byte to change the state of the drive + * mode and polarity bits. Any other value written to the top byte has no + * effect on the state of the drive mode or polarity bits. However, the pulse + * width value must be preserved (as desired) if written. + */ +#define WDT_RESET_WIDTH 0x18 +#define WDT_RESET_WIDTH_ACTIVE_HIGH BIT(31) +#define WDT_ACTIVE_HIGH_MAGIC (0xA5 << 24) +#define WDT_ACTIVE_LOW_MAGIC (0x5A << 24) +#define WDT_RESET_WIDTH_PUSH_PULL BIT(30) +#define WDT_PUSH_PULL_MAGIC (0xA8 << 24) +#define WDT_OPEN_DRAIN_MAGIC (0x8A << 24) + +#define WDT_RESTART_MAGIC 0x4755 + +/* 32 bits at 1MHz, in milliseconds */ +#define WDT_MAX_TIMEOUT_MS 4294967 +#define WDT_DEFAULT_TIMEOUT 30 +#define WDT_RATE_1MHZ 1000000 + +static struct aspeed_wdt *to_aspeed_wdt(struct watchdog_device *wdd) +{ + return container_of(wdd, struct aspeed_wdt, wdd); +} + +static void aspeed_wdt_enable(struct aspeed_wdt *wdt, int count) +{ + wdt->ctrl |= WDT_CTRL_ENABLE; + + writel(0, wdt->base + WDT_CTRL); + writel(count, wdt->base + WDT_RELOAD_VALUE); + writel(WDT_RESTART_MAGIC, wdt->base + WDT_RESTART); + writel(wdt->ctrl, wdt->base + WDT_CTRL); +} + +static int aspeed_wdt_start(struct watchdog_device *wdd) +{ + struct aspeed_wdt *wdt = to_aspeed_wdt(wdd); + + aspeed_wdt_enable(wdt, wdd->timeout * WDT_RATE_1MHZ); + + return 0; +} + +static int aspeed_wdt_stop(struct watchdog_device *wdd) +{ + struct aspeed_wdt *wdt = to_aspeed_wdt(wdd); + + wdt->ctrl &= ~WDT_CTRL_ENABLE; + writel(wdt->ctrl, wdt->base + WDT_CTRL); + + return 0; +} + +static int aspeed_wdt_ping(struct watchdog_device *wdd) +{ + struct aspeed_wdt *wdt = to_aspeed_wdt(wdd); + + writel(WDT_RESTART_MAGIC, wdt->base + WDT_RESTART); + + return 0; +} + +static int aspeed_wdt_set_timeout(struct watchdog_device *wdd, + unsigned int timeout) +{ + struct aspeed_wdt *wdt = to_aspeed_wdt(wdd); + u32 actual; + + wdd->timeout = timeout; + + actual = min(timeout, wdd->max_hw_heartbeat_ms / 1000); + + writel(actual * WDT_RATE_1MHZ, wdt->base + WDT_RELOAD_VALUE); + writel(WDT_RESTART_MAGIC, wdt->base + WDT_RESTART); + + return 0; +} + +static int aspeed_wdt_restart(struct watchdog_device *wdd, + unsigned long action, void *data) +{ + struct aspeed_wdt *wdt = to_aspeed_wdt(wdd); + + wdt->ctrl &= ~WDT_CTRL_BOOT_SECONDARY; + aspeed_wdt_enable(wdt, 128 * WDT_RATE_1MHZ / 1000); + + mdelay(1000); + + return 0; +} + +static const struct watchdog_ops aspeed_wdt_ops = { + .start = aspeed_wdt_start, + .stop = aspeed_wdt_stop, + .ping = aspeed_wdt_ping, + .set_timeout = aspeed_wdt_set_timeout, + .restart = aspeed_wdt_restart, + .owner = THIS_MODULE, +}; + +static const struct watchdog_info aspeed_wdt_info = { + .options = WDIOF_KEEPALIVEPING + | WDIOF_MAGICCLOSE + | WDIOF_SETTIMEOUT, + .identity = KBUILD_MODNAME, +}; + +static int aspeed_wdt_probe(struct platform_device *pdev) +{ + const struct aspeed_wdt_config *config; + const struct of_device_id *ofdid; + struct aspeed_wdt *wdt; + struct resource *res; + struct device_node *np; + const char *reset_type; + u32 duration; + u32 status; + int ret; + + wdt = devm_kzalloc(&pdev->dev, sizeof(*wdt), GFP_KERNEL); + if (!wdt) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + wdt->base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(wdt->base)) + return PTR_ERR(wdt->base); + + wdt->wdd.info = &aspeed_wdt_info; + wdt->wdd.ops = &aspeed_wdt_ops; + wdt->wdd.max_hw_heartbeat_ms = WDT_MAX_TIMEOUT_MS; + wdt->wdd.parent = &pdev->dev; + + wdt->wdd.timeout = WDT_DEFAULT_TIMEOUT; + watchdog_init_timeout(&wdt->wdd, 0, &pdev->dev); + + np = pdev->dev.of_node; + + ofdid = of_match_node(aspeed_wdt_of_table, np); + if (!ofdid) + return -EINVAL; + config = ofdid->data; + + /* + * On clock rates: + * - ast2400 wdt can run at PCLK, or 1MHz + * - ast2500 only runs at 1MHz, hard coding bit 4 to 1 + * - ast2600 always runs at 1MHz + * + * Set the ast2400 to run at 1MHz as it simplifies the driver. + */ + if (of_device_is_compatible(np, "aspeed,ast2400-wdt")) + wdt->ctrl = WDT_CTRL_1MHZ_CLK; + + /* + * Control reset on a per-device basis to ensure the + * host is not affected by a BMC reboot + */ + ret = of_property_read_string(np, "aspeed,reset-type", &reset_type); + if (ret) { + wdt->ctrl |= WDT_CTRL_RESET_MODE_SOC | WDT_CTRL_RESET_SYSTEM; + } else { + if (!strcmp(reset_type, "cpu")) + wdt->ctrl |= WDT_CTRL_RESET_MODE_ARM_CPU | + WDT_CTRL_RESET_SYSTEM; + else if (!strcmp(reset_type, "soc")) + wdt->ctrl |= WDT_CTRL_RESET_MODE_SOC | + WDT_CTRL_RESET_SYSTEM; + else if (!strcmp(reset_type, "system")) + wdt->ctrl |= WDT_CTRL_RESET_MODE_FULL_CHIP | + WDT_CTRL_RESET_SYSTEM; + else if (strcmp(reset_type, "none")) + return -EINVAL; + } + if (of_property_read_bool(np, "aspeed,external-signal")) + wdt->ctrl |= WDT_CTRL_WDT_EXT; + if (of_property_read_bool(np, "aspeed,alt-boot")) + wdt->ctrl |= WDT_CTRL_BOOT_SECONDARY; + + if (readl(wdt->base + WDT_CTRL) & WDT_CTRL_ENABLE) { + /* + * The watchdog is running, but invoke aspeed_wdt_start() to + * write wdt->ctrl to WDT_CTRL to ensure the watchdog's + * configuration conforms to the driver's expectations. + * Primarily, ensure we're using the 1MHz clock source. + */ + aspeed_wdt_start(&wdt->wdd); + set_bit(WDOG_HW_RUNNING, &wdt->wdd.status); + } + + if ((of_device_is_compatible(np, "aspeed,ast2500-wdt")) || + (of_device_is_compatible(np, "aspeed,ast2600-wdt"))) { + u32 reg = readl(wdt->base + WDT_RESET_WIDTH); + + reg &= config->ext_pulse_width_mask; + if (of_property_read_bool(np, "aspeed,ext-push-pull")) + reg |= WDT_PUSH_PULL_MAGIC; + else + reg |= WDT_OPEN_DRAIN_MAGIC; + + writel(reg, wdt->base + WDT_RESET_WIDTH); + + reg &= config->ext_pulse_width_mask; + if (of_property_read_bool(np, "aspeed,ext-active-high")) + reg |= WDT_ACTIVE_HIGH_MAGIC; + else + reg |= WDT_ACTIVE_LOW_MAGIC; + + writel(reg, wdt->base + WDT_RESET_WIDTH); + } + + if (!of_property_read_u32(np, "aspeed,ext-pulse-duration", &duration)) { + u32 max_duration = config->ext_pulse_width_mask + 1; + + if (duration == 0 || duration > max_duration) { + dev_err(&pdev->dev, "Invalid pulse duration: %uus\n", + duration); + duration = max(1U, min(max_duration, duration)); + dev_info(&pdev->dev, "Pulse duration set to %uus\n", + duration); + } + + /* + * The watchdog is always configured with a 1MHz source, so + * there is no need to scale the microsecond value. However we + * need to offset it - from the datasheet: + * + * "This register decides the asserting duration of wdt_ext and + * wdt_rstarm signal. The default value is 0xFF. It means the + * default asserting duration of wdt_ext and wdt_rstarm is + * 256us." + * + * This implies a value of 0 gives a 1us pulse. + */ + writel(duration - 1, wdt->base + WDT_RESET_WIDTH); + } + + status = readl(wdt->base + WDT_TIMEOUT_STATUS); + if (status & WDT_TIMEOUT_STATUS_BOOT_SECONDARY) + wdt->wdd.bootstatus = WDIOF_CARDRESET; + + ret = devm_watchdog_register_device(&pdev->dev, &wdt->wdd); + if (ret) { + dev_err(&pdev->dev, "failed to register\n"); + return ret; + } + + return 0; +} + +static struct platform_driver aspeed_watchdog_driver = { + .probe = aspeed_wdt_probe, + .driver = { + .name = KBUILD_MODNAME, + .of_match_table = of_match_ptr(aspeed_wdt_of_table), + }, +}; + +static int __init aspeed_wdt_init(void) +{ + return platform_driver_register(&aspeed_watchdog_driver); +} +arch_initcall(aspeed_wdt_init); + +static void __exit aspeed_wdt_exit(void) +{ + platform_driver_unregister(&aspeed_watchdog_driver); +} +module_exit(aspeed_wdt_exit); + +MODULE_DESCRIPTION("Aspeed Watchdog Driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/watchdog/at91rm9200_wdt.c b/drivers/watchdog/at91rm9200_wdt.c new file mode 100644 index 000000000..b45fc0aee --- /dev/null +++ b/drivers/watchdog/at91rm9200_wdt.c @@ -0,0 +1,342 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Watchdog driver for Atmel AT91RM9200 (Thunder) + * + * Copyright (C) 2003 SAN People (Pty) Ltd + * + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/bitops.h> +#include <linux/delay.h> +#include <linux/errno.h> +#include <linux/fs.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/mfd/syscon.h> +#include <linux/mfd/syscon/atmel-st.h> +#include <linux/miscdevice.h> +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/platform_device.h> +#include <linux/reboot.h> +#include <linux/regmap.h> +#include <linux/types.h> +#include <linux/watchdog.h> +#include <linux/uaccess.h> +#include <linux/of.h> +#include <linux/of_device.h> + +#define WDT_DEFAULT_TIME 5 /* seconds */ +#define WDT_MAX_TIME 256 /* seconds */ + +static int wdt_time = WDT_DEFAULT_TIME; +static bool nowayout = WATCHDOG_NOWAYOUT; +static struct regmap *regmap_st; + +module_param(wdt_time, int, 0); +MODULE_PARM_DESC(wdt_time, "Watchdog time in seconds. (default=" + __MODULE_STRING(WDT_DEFAULT_TIME) ")"); + +#ifdef CONFIG_WATCHDOG_NOWAYOUT +module_param(nowayout, bool, 0); +MODULE_PARM_DESC(nowayout, + "Watchdog cannot be stopped once started (default=" + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); +#endif + + +static unsigned long at91wdt_busy; + +/* ......................................................................... */ + +static int at91rm9200_restart(struct notifier_block *this, + unsigned long mode, void *cmd) +{ + /* + * Perform a hardware reset with the use of the Watchdog timer. + */ + regmap_write(regmap_st, AT91_ST_WDMR, + AT91_ST_RSTEN | AT91_ST_EXTEN | 1); + regmap_write(regmap_st, AT91_ST_CR, AT91_ST_WDRST); + + mdelay(2000); + + pr_emerg("Unable to restart system\n"); + return NOTIFY_DONE; +} + +static struct notifier_block at91rm9200_restart_nb = { + .notifier_call = at91rm9200_restart, + .priority = 192, +}; + +/* + * Disable the watchdog. + */ +static inline void at91_wdt_stop(void) +{ + regmap_write(regmap_st, AT91_ST_WDMR, AT91_ST_EXTEN); +} + +/* + * Enable and reset the watchdog. + */ +static inline void at91_wdt_start(void) +{ + regmap_write(regmap_st, AT91_ST_WDMR, AT91_ST_EXTEN | AT91_ST_RSTEN | + (((65536 * wdt_time) >> 8) & AT91_ST_WDV)); + regmap_write(regmap_st, AT91_ST_CR, AT91_ST_WDRST); +} + +/* + * Reload the watchdog timer. (ie, pat the watchdog) + */ +static inline void at91_wdt_reload(void) +{ + regmap_write(regmap_st, AT91_ST_CR, AT91_ST_WDRST); +} + +/* ......................................................................... */ + +/* + * Watchdog device is opened, and watchdog starts running. + */ +static int at91_wdt_open(struct inode *inode, struct file *file) +{ + if (test_and_set_bit(0, &at91wdt_busy)) + return -EBUSY; + + at91_wdt_start(); + return nonseekable_open(inode, file); +} + +/* + * Close the watchdog device. + * If CONFIG_WATCHDOG_NOWAYOUT is NOT defined then the watchdog is also + * disabled. + */ +static int at91_wdt_close(struct inode *inode, struct file *file) +{ + /* Disable the watchdog when file is closed */ + if (!nowayout) + at91_wdt_stop(); + + clear_bit(0, &at91wdt_busy); + return 0; +} + +/* + * Change the watchdog time interval. + */ +static int at91_wdt_settimeout(int new_time) +{ + /* + * All counting occurs at SLOW_CLOCK / 128 = 256 Hz + * + * Since WDV is a 16-bit counter, the maximum period is + * 65536 / 256 = 256 seconds. + */ + if ((new_time <= 0) || (new_time > WDT_MAX_TIME)) + return -EINVAL; + + /* Set new watchdog time. It will be used when + at91_wdt_start() is called. */ + wdt_time = new_time; + return 0; +} + +static const struct watchdog_info at91_wdt_info = { + .identity = "at91 watchdog", + .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING, +}; + +/* + * Handle commands from user-space. + */ +static long at91_wdt_ioctl(struct file *file, + unsigned int cmd, unsigned long arg) +{ + void __user *argp = (void __user *)arg; + int __user *p = argp; + int new_value; + + switch (cmd) { + case WDIOC_GETSUPPORT: + return copy_to_user(argp, &at91_wdt_info, + sizeof(at91_wdt_info)) ? -EFAULT : 0; + case WDIOC_GETSTATUS: + case WDIOC_GETBOOTSTATUS: + return put_user(0, p); + case WDIOC_SETOPTIONS: + if (get_user(new_value, p)) + return -EFAULT; + if (new_value & WDIOS_DISABLECARD) + at91_wdt_stop(); + if (new_value & WDIOS_ENABLECARD) + at91_wdt_start(); + return 0; + case WDIOC_KEEPALIVE: + at91_wdt_reload(); /* pat the watchdog */ + return 0; + case WDIOC_SETTIMEOUT: + if (get_user(new_value, p)) + return -EFAULT; + if (at91_wdt_settimeout(new_value)) + return -EINVAL; + /* Enable new time value */ + at91_wdt_start(); + /* Return current value */ + return put_user(wdt_time, p); + case WDIOC_GETTIMEOUT: + return put_user(wdt_time, p); + default: + return -ENOTTY; + } +} + +/* + * Pat the watchdog whenever device is written to. + */ +static ssize_t at91_wdt_write(struct file *file, const char *data, + size_t len, loff_t *ppos) +{ + at91_wdt_reload(); /* pat the watchdog */ + return len; +} + +/* ......................................................................... */ + +static const struct file_operations at91wdt_fops = { + .owner = THIS_MODULE, + .llseek = no_llseek, + .unlocked_ioctl = at91_wdt_ioctl, + .open = at91_wdt_open, + .release = at91_wdt_close, + .write = at91_wdt_write, +}; + +static struct miscdevice at91wdt_miscdev = { + .minor = WATCHDOG_MINOR, + .name = "watchdog", + .fops = &at91wdt_fops, +}; + +static int at91wdt_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct device *parent; + int res; + + if (at91wdt_miscdev.parent) + return -EBUSY; + at91wdt_miscdev.parent = &pdev->dev; + + parent = dev->parent; + if (!parent) { + dev_err(dev, "no parent\n"); + return -ENODEV; + } + + regmap_st = syscon_node_to_regmap(parent->of_node); + if (IS_ERR(regmap_st)) + return -ENODEV; + + res = misc_register(&at91wdt_miscdev); + if (res) + return res; + + res = register_restart_handler(&at91rm9200_restart_nb); + if (res) + dev_warn(dev, "failed to register restart handler\n"); + + pr_info("AT91 Watchdog Timer enabled (%d seconds%s)\n", + wdt_time, nowayout ? ", nowayout" : ""); + return 0; +} + +static int at91wdt_remove(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + int res; + + res = unregister_restart_handler(&at91rm9200_restart_nb); + if (res) + dev_warn(dev, "failed to unregister restart handler\n"); + + misc_deregister(&at91wdt_miscdev); + at91wdt_miscdev.parent = NULL; + + return res; +} + +static void at91wdt_shutdown(struct platform_device *pdev) +{ + at91_wdt_stop(); +} + +#ifdef CONFIG_PM + +static int at91wdt_suspend(struct platform_device *pdev, pm_message_t message) +{ + at91_wdt_stop(); + return 0; +} + +static int at91wdt_resume(struct platform_device *pdev) +{ + if (at91wdt_busy) + at91_wdt_start(); + return 0; +} + +#else +#define at91wdt_suspend NULL +#define at91wdt_resume NULL +#endif + +static const struct of_device_id at91_wdt_dt_ids[] = { + { .compatible = "atmel,at91rm9200-wdt" }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, at91_wdt_dt_ids); + +static struct platform_driver at91wdt_driver = { + .probe = at91wdt_probe, + .remove = at91wdt_remove, + .shutdown = at91wdt_shutdown, + .suspend = at91wdt_suspend, + .resume = at91wdt_resume, + .driver = { + .name = "atmel_st_watchdog", + .of_match_table = at91_wdt_dt_ids, + }, +}; + +static int __init at91_wdt_init(void) +{ + /* Check that the heartbeat value is within range; + if not reset to the default */ + if (at91_wdt_settimeout(wdt_time)) { + at91_wdt_settimeout(WDT_DEFAULT_TIME); + pr_info("wdt_time value must be 1 <= wdt_time <= 256, using %d\n", + wdt_time); + } + + return platform_driver_register(&at91wdt_driver); +} + +static void __exit at91_wdt_exit(void) +{ + platform_driver_unregister(&at91wdt_driver); +} + +module_init(at91_wdt_init); +module_exit(at91_wdt_exit); + +MODULE_AUTHOR("Andrew Victor"); +MODULE_DESCRIPTION("Watchdog driver for Atmel AT91RM9200"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:atmel_st_watchdog"); diff --git a/drivers/watchdog/at91sam9_wdt.c b/drivers/watchdog/at91sam9_wdt.c new file mode 100644 index 000000000..f4050a229 --- /dev/null +++ b/drivers/watchdog/at91sam9_wdt.c @@ -0,0 +1,420 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Watchdog driver for Atmel AT91SAM9x processors. + * + * Copyright (C) 2008 Renaud CERRATO r.cerrato@til-technologies.fr + * + */ + +/* + * The Watchdog Timer Mode Register can be only written to once. If the + * timeout need to be set from Linux, be sure that the bootstrap or the + * bootloader doesn't write to this register. + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/clk.h> +#include <linux/errno.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/platform_device.h> +#include <linux/reboot.h> +#include <linux/types.h> +#include <linux/watchdog.h> +#include <linux/jiffies.h> +#include <linux/timer.h> +#include <linux/bitops.h> +#include <linux/uaccess.h> +#include <linux/of.h> +#include <linux/of_irq.h> + +#include "at91sam9_wdt.h" + +#define DRV_NAME "AT91SAM9 Watchdog" + +#define wdt_read(wdt, field) \ + readl_relaxed((wdt)->base + (field)) +#define wdt_write(wtd, field, val) \ + writel_relaxed((val), (wdt)->base + (field)) + +/* AT91SAM9 watchdog runs a 12bit counter @ 256Hz, + * use this to convert a watchdog + * value from/to milliseconds. + */ +#define ticks_to_hz_rounddown(t) ((((t) + 1) * HZ) >> 8) +#define ticks_to_hz_roundup(t) (((((t) + 1) * HZ) + 255) >> 8) +#define ticks_to_secs(t) (((t) + 1) >> 8) +#define secs_to_ticks(s) ((s) ? (((s) << 8) - 1) : 0) + +#define WDT_MR_RESET 0x3FFF2FFF + +/* Watchdog max counter value in ticks */ +#define WDT_COUNTER_MAX_TICKS 0xFFF + +/* Watchdog max delta/value in secs */ +#define WDT_COUNTER_MAX_SECS ticks_to_secs(WDT_COUNTER_MAX_TICKS) + +/* Hardware timeout in seconds */ +#define WDT_HW_TIMEOUT 2 + +/* Timer heartbeat (500ms) */ +#define WDT_TIMEOUT (HZ/2) + +/* User land timeout */ +#define WDT_HEARTBEAT 15 +static int heartbeat; +module_param(heartbeat, int, 0); +MODULE_PARM_DESC(heartbeat, "Watchdog heartbeats in seconds. " + "(default = " __MODULE_STRING(WDT_HEARTBEAT) ")"); + +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); +MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started " + "(default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); + +#define to_wdt(wdd) container_of(wdd, struct at91wdt, wdd) +struct at91wdt { + struct watchdog_device wdd; + void __iomem *base; + unsigned long next_heartbeat; /* the next_heartbeat for the timer */ + struct timer_list timer; /* The timer that pings the watchdog */ + u32 mr; + u32 mr_mask; + unsigned long heartbeat; /* WDT heartbeat in jiffies */ + bool nowayout; + unsigned int irq; + struct clk *sclk; +}; + +/* ......................................................................... */ + +static irqreturn_t wdt_interrupt(int irq, void *dev_id) +{ + struct at91wdt *wdt = (struct at91wdt *)dev_id; + + if (wdt_read(wdt, AT91_WDT_SR)) { + pr_crit("at91sam9 WDT software reset\n"); + emergency_restart(); + pr_crit("Reboot didn't ?????\n"); + } + + return IRQ_HANDLED; +} + +/* + * Reload the watchdog timer. (ie, pat the watchdog) + */ +static inline void at91_wdt_reset(struct at91wdt *wdt) +{ + wdt_write(wdt, AT91_WDT_CR, AT91_WDT_KEY | AT91_WDT_WDRSTT); +} + +/* + * Timer tick + */ +static void at91_ping(struct timer_list *t) +{ + struct at91wdt *wdt = from_timer(wdt, t, timer); + if (time_before(jiffies, wdt->next_heartbeat) || + !watchdog_active(&wdt->wdd)) { + at91_wdt_reset(wdt); + mod_timer(&wdt->timer, jiffies + wdt->heartbeat); + } else { + pr_crit("I will reset your machine !\n"); + } +} + +static int at91_wdt_start(struct watchdog_device *wdd) +{ + struct at91wdt *wdt = to_wdt(wdd); + /* calculate when the next userspace timeout will be */ + wdt->next_heartbeat = jiffies + wdd->timeout * HZ; + return 0; +} + +static int at91_wdt_stop(struct watchdog_device *wdd) +{ + /* The watchdog timer hardware can not be stopped... */ + return 0; +} + +static int at91_wdt_set_timeout(struct watchdog_device *wdd, unsigned int new_timeout) +{ + wdd->timeout = new_timeout; + return at91_wdt_start(wdd); +} + +static int at91_wdt_init(struct platform_device *pdev, struct at91wdt *wdt) +{ + u32 tmp; + u32 delta; + u32 value; + int err; + u32 mask = wdt->mr_mask; + unsigned long min_heartbeat = 1; + unsigned long max_heartbeat; + struct device *dev = &pdev->dev; + + tmp = wdt_read(wdt, AT91_WDT_MR); + if ((tmp & mask) != (wdt->mr & mask)) { + if (tmp == WDT_MR_RESET) { + wdt_write(wdt, AT91_WDT_MR, wdt->mr); + tmp = wdt_read(wdt, AT91_WDT_MR); + } + } + + if (tmp & AT91_WDT_WDDIS) { + if (wdt->mr & AT91_WDT_WDDIS) + return 0; + dev_err(dev, "watchdog is disabled\n"); + return -EINVAL; + } + + value = tmp & AT91_WDT_WDV; + delta = (tmp & AT91_WDT_WDD) >> 16; + + if (delta < value) + min_heartbeat = ticks_to_hz_roundup(value - delta); + + max_heartbeat = ticks_to_hz_rounddown(value); + if (!max_heartbeat) { + dev_err(dev, + "heartbeat is too small for the system to handle it correctly\n"); + return -EINVAL; + } + + /* + * Try to reset the watchdog counter 4 or 2 times more often than + * actually requested, to avoid spurious watchdog reset. + * If this is not possible because of the min_heartbeat value, reset + * it at the min_heartbeat period. + */ + if ((max_heartbeat / 4) >= min_heartbeat) + wdt->heartbeat = max_heartbeat / 4; + else if ((max_heartbeat / 2) >= min_heartbeat) + wdt->heartbeat = max_heartbeat / 2; + else + wdt->heartbeat = min_heartbeat; + + if (max_heartbeat < min_heartbeat + 4) + dev_warn(dev, + "min heartbeat and max heartbeat might be too close for the system to handle it correctly\n"); + + if ((tmp & AT91_WDT_WDFIEN) && wdt->irq) { + err = request_irq(wdt->irq, wdt_interrupt, + IRQF_SHARED | IRQF_IRQPOLL | + IRQF_NO_SUSPEND, + pdev->name, wdt); + if (err) + return err; + } + + if ((tmp & wdt->mr_mask) != (wdt->mr & wdt->mr_mask)) + dev_warn(dev, + "watchdog already configured differently (mr = %x expecting %x)\n", + tmp & wdt->mr_mask, wdt->mr & wdt->mr_mask); + + timer_setup(&wdt->timer, at91_ping, 0); + + /* + * Use min_heartbeat the first time to avoid spurious watchdog reset: + * we don't know for how long the watchdog counter is running, and + * - resetting it right now might trigger a watchdog fault reset + * - waiting for heartbeat time might lead to a watchdog timeout + * reset + */ + mod_timer(&wdt->timer, jiffies + min_heartbeat); + + /* Try to set timeout from device tree first */ + if (watchdog_init_timeout(&wdt->wdd, 0, dev)) + watchdog_init_timeout(&wdt->wdd, heartbeat, dev); + watchdog_set_nowayout(&wdt->wdd, wdt->nowayout); + err = watchdog_register_device(&wdt->wdd); + if (err) + goto out_stop_timer; + + wdt->next_heartbeat = jiffies + wdt->wdd.timeout * HZ; + + return 0; + +out_stop_timer: + del_timer(&wdt->timer); + return err; +} + +/* ......................................................................... */ + +static const struct watchdog_info at91_wdt_info = { + .identity = DRV_NAME, + .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | + WDIOF_MAGICCLOSE, +}; + +static const struct watchdog_ops at91_wdt_ops = { + .owner = THIS_MODULE, + .start = at91_wdt_start, + .stop = at91_wdt_stop, + .set_timeout = at91_wdt_set_timeout, +}; + +#if defined(CONFIG_OF) +static int of_at91wdt_init(struct device_node *np, struct at91wdt *wdt) +{ + u32 min = 0; + u32 max = WDT_COUNTER_MAX_SECS; + const char *tmp; + + /* Get the interrupts property */ + wdt->irq = irq_of_parse_and_map(np, 0); + if (!wdt->irq) + dev_warn(wdt->wdd.parent, "failed to get IRQ from DT\n"); + + if (!of_property_read_u32_index(np, "atmel,max-heartbeat-sec", 0, + &max)) { + if (!max || max > WDT_COUNTER_MAX_SECS) + max = WDT_COUNTER_MAX_SECS; + + if (!of_property_read_u32_index(np, "atmel,min-heartbeat-sec", + 0, &min)) { + if (min >= max) + min = max - 1; + } + } + + min = secs_to_ticks(min); + max = secs_to_ticks(max); + + wdt->mr_mask = 0x3FFFFFFF; + wdt->mr = 0; + if (!of_property_read_string(np, "atmel,watchdog-type", &tmp) && + !strcmp(tmp, "software")) { + wdt->mr |= AT91_WDT_WDFIEN; + wdt->mr_mask &= ~AT91_WDT_WDRPROC; + } else { + wdt->mr |= AT91_WDT_WDRSTEN; + } + + if (!of_property_read_string(np, "atmel,reset-type", &tmp) && + !strcmp(tmp, "proc")) + wdt->mr |= AT91_WDT_WDRPROC; + + if (of_property_read_bool(np, "atmel,disable")) { + wdt->mr |= AT91_WDT_WDDIS; + wdt->mr_mask &= AT91_WDT_WDDIS; + } + + if (of_property_read_bool(np, "atmel,idle-halt")) + wdt->mr |= AT91_WDT_WDIDLEHLT; + + if (of_property_read_bool(np, "atmel,dbg-halt")) + wdt->mr |= AT91_WDT_WDDBGHLT; + + wdt->mr |= max | ((max - min) << 16); + + return 0; +} +#else +static inline int of_at91wdt_init(struct device_node *np, struct at91wdt *wdt) +{ + return 0; +} +#endif + +static int __init at91wdt_probe(struct platform_device *pdev) +{ + struct resource *r; + int err; + struct at91wdt *wdt; + + wdt = devm_kzalloc(&pdev->dev, sizeof(*wdt), GFP_KERNEL); + if (!wdt) + return -ENOMEM; + + wdt->mr = (WDT_HW_TIMEOUT * 256) | AT91_WDT_WDRSTEN | AT91_WDT_WDD | + AT91_WDT_WDDBGHLT | AT91_WDT_WDIDLEHLT; + wdt->mr_mask = 0x3FFFFFFF; + wdt->nowayout = nowayout; + wdt->wdd.parent = &pdev->dev; + wdt->wdd.info = &at91_wdt_info; + wdt->wdd.ops = &at91_wdt_ops; + wdt->wdd.timeout = WDT_HEARTBEAT; + wdt->wdd.min_timeout = 1; + wdt->wdd.max_timeout = 0xFFFF; + + r = platform_get_resource(pdev, IORESOURCE_MEM, 0); + wdt->base = devm_ioremap_resource(&pdev->dev, r); + if (IS_ERR(wdt->base)) + return PTR_ERR(wdt->base); + + wdt->sclk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(wdt->sclk)) + return PTR_ERR(wdt->sclk); + + err = clk_prepare_enable(wdt->sclk); + if (err) { + dev_err(&pdev->dev, "Could not enable slow clock\n"); + return err; + } + + if (pdev->dev.of_node) { + err = of_at91wdt_init(pdev->dev.of_node, wdt); + if (err) + goto err_clk; + } + + err = at91_wdt_init(pdev, wdt); + if (err) + goto err_clk; + + platform_set_drvdata(pdev, wdt); + + pr_info("enabled (heartbeat=%d sec, nowayout=%d)\n", + wdt->wdd.timeout, wdt->nowayout); + + return 0; + +err_clk: + clk_disable_unprepare(wdt->sclk); + + return err; +} + +static int __exit at91wdt_remove(struct platform_device *pdev) +{ + struct at91wdt *wdt = platform_get_drvdata(pdev); + watchdog_unregister_device(&wdt->wdd); + + pr_warn("I quit now, hardware will probably reboot!\n"); + del_timer(&wdt->timer); + clk_disable_unprepare(wdt->sclk); + + return 0; +} + +#if defined(CONFIG_OF) +static const struct of_device_id at91_wdt_dt_ids[] = { + { .compatible = "atmel,at91sam9260-wdt" }, + { /* sentinel */ } +}; + +MODULE_DEVICE_TABLE(of, at91_wdt_dt_ids); +#endif + +static struct platform_driver at91wdt_driver = { + .remove = __exit_p(at91wdt_remove), + .driver = { + .name = "at91_wdt", + .of_match_table = of_match_ptr(at91_wdt_dt_ids), + }, +}; + +module_platform_driver_probe(at91wdt_driver, at91wdt_probe); + +MODULE_AUTHOR("Renaud CERRATO <r.cerrato@til-technologies.fr>"); +MODULE_DESCRIPTION("Watchdog driver for Atmel AT91SAM9x processors"); +MODULE_LICENSE("GPL"); diff --git a/drivers/watchdog/at91sam9_wdt.h b/drivers/watchdog/at91sam9_wdt.h new file mode 100644 index 000000000..390941c65 --- /dev/null +++ b/drivers/watchdog/at91sam9_wdt.h @@ -0,0 +1,36 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * drivers/watchdog/at91sam9_wdt.h + * + * Copyright (C) 2007 Andrew Victor + * Copyright (C) 2007 Atmel Corporation. + * + * Watchdog Timer (WDT) - System peripherals regsters. + * Based on AT91SAM9261 datasheet revision D. + * + */ + +#ifndef AT91_WDT_H +#define AT91_WDT_H + +#define AT91_WDT_CR 0x00 /* Watchdog Control Register */ +#define AT91_WDT_WDRSTT (1 << 0) /* Restart */ +#define AT91_WDT_KEY (0xa5 << 24) /* KEY Password */ + +#define AT91_WDT_MR 0x04 /* Watchdog Mode Register */ +#define AT91_WDT_WDV (0xfff << 0) /* Counter Value */ +#define AT91_WDT_SET_WDV(x) ((x) & AT91_WDT_WDV) +#define AT91_WDT_WDFIEN (1 << 12) /* Fault Interrupt Enable */ +#define AT91_WDT_WDRSTEN (1 << 13) /* Reset Processor */ +#define AT91_WDT_WDRPROC (1 << 14) /* Timer Restart */ +#define AT91_WDT_WDDIS (1 << 15) /* Watchdog Disable */ +#define AT91_WDT_WDD (0xfff << 16) /* Delta Value */ +#define AT91_WDT_SET_WDD(x) (((x) << 16) & AT91_WDT_WDD) +#define AT91_WDT_WDDBGHLT (1 << 28) /* Debug Halt */ +#define AT91_WDT_WDIDLEHLT (1 << 29) /* Idle Halt */ + +#define AT91_WDT_SR 0x08 /* Watchdog Status Register */ +#define AT91_WDT_WDUNF (1 << 0) /* Watchdog Underflow */ +#define AT91_WDT_WDERR (1 << 1) /* Watchdog Error */ + +#endif diff --git a/drivers/watchdog/ath79_wdt.c b/drivers/watchdog/ath79_wdt.c new file mode 100644 index 000000000..e2209bf5f --- /dev/null +++ b/drivers/watchdog/ath79_wdt.c @@ -0,0 +1,340 @@ +/* + * Atheros AR71XX/AR724X/AR913X built-in hardware watchdog timer. + * + * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org> + * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> + * + * This driver was based on: drivers/watchdog/ixp4xx_wdt.c + * Author: Deepak Saxena <dsaxena@plexity.net> + * Copyright 2004 (c) MontaVista, Software, Inc. + * + * which again was based on sa1100 driver, + * Copyright (C) 2000 Oleg Drokin <green@crimea.edu> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/bitops.h> +#include <linux/delay.h> +#include <linux/errno.h> +#include <linux/fs.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/miscdevice.h> +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/platform_device.h> +#include <linux/types.h> +#include <linux/watchdog.h> +#include <linux/clk.h> +#include <linux/err.h> +#include <linux/of.h> +#include <linux/of_platform.h> +#include <linux/uaccess.h> + +#define DRIVER_NAME "ath79-wdt" + +#define WDT_TIMEOUT 15 /* seconds */ + +#define WDOG_REG_CTRL 0x00 +#define WDOG_REG_TIMER 0x04 + +#define WDOG_CTRL_LAST_RESET BIT(31) +#define WDOG_CTRL_ACTION_MASK 3 +#define WDOG_CTRL_ACTION_NONE 0 /* no action */ +#define WDOG_CTRL_ACTION_GPI 1 /* general purpose interrupt */ +#define WDOG_CTRL_ACTION_NMI 2 /* NMI */ +#define WDOG_CTRL_ACTION_FCR 3 /* full chip reset */ + +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); +MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started " + "(default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); + +static int timeout = WDT_TIMEOUT; +module_param(timeout, int, 0); +MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds " + "(default=" __MODULE_STRING(WDT_TIMEOUT) "s)"); + +static unsigned long wdt_flags; + +#define WDT_FLAGS_BUSY 0 +#define WDT_FLAGS_EXPECT_CLOSE 1 + +static struct clk *wdt_clk; +static unsigned long wdt_freq; +static int boot_status; +static int max_timeout; +static void __iomem *wdt_base; + +static inline void ath79_wdt_wr(unsigned reg, u32 val) +{ + iowrite32(val, wdt_base + reg); +} + +static inline u32 ath79_wdt_rr(unsigned reg) +{ + return ioread32(wdt_base + reg); +} + +static inline void ath79_wdt_keepalive(void) +{ + ath79_wdt_wr(WDOG_REG_TIMER, wdt_freq * timeout); + /* flush write */ + ath79_wdt_rr(WDOG_REG_TIMER); +} + +static inline void ath79_wdt_enable(void) +{ + ath79_wdt_keepalive(); + + /* + * Updating the TIMER register requires a few microseconds + * on the AR934x SoCs at least. Use a small delay to ensure + * that the TIMER register is updated within the hardware + * before enabling the watchdog. + */ + udelay(2); + + ath79_wdt_wr(WDOG_REG_CTRL, WDOG_CTRL_ACTION_FCR); + /* flush write */ + ath79_wdt_rr(WDOG_REG_CTRL); +} + +static inline void ath79_wdt_disable(void) +{ + ath79_wdt_wr(WDOG_REG_CTRL, WDOG_CTRL_ACTION_NONE); + /* flush write */ + ath79_wdt_rr(WDOG_REG_CTRL); +} + +static int ath79_wdt_set_timeout(int val) +{ + if (val < 1 || val > max_timeout) + return -EINVAL; + + timeout = val; + ath79_wdt_keepalive(); + + return 0; +} + +static int ath79_wdt_open(struct inode *inode, struct file *file) +{ + if (test_and_set_bit(WDT_FLAGS_BUSY, &wdt_flags)) + return -EBUSY; + + clear_bit(WDT_FLAGS_EXPECT_CLOSE, &wdt_flags); + ath79_wdt_enable(); + + return nonseekable_open(inode, file); +} + +static int ath79_wdt_release(struct inode *inode, struct file *file) +{ + if (test_bit(WDT_FLAGS_EXPECT_CLOSE, &wdt_flags)) + ath79_wdt_disable(); + else { + pr_crit("device closed unexpectedly, watchdog timer will not stop!\n"); + ath79_wdt_keepalive(); + } + + clear_bit(WDT_FLAGS_BUSY, &wdt_flags); + clear_bit(WDT_FLAGS_EXPECT_CLOSE, &wdt_flags); + + return 0; +} + +static ssize_t ath79_wdt_write(struct file *file, const char *data, + size_t len, loff_t *ppos) +{ + if (len) { + if (!nowayout) { + size_t i; + + clear_bit(WDT_FLAGS_EXPECT_CLOSE, &wdt_flags); + + for (i = 0; i != len; i++) { + char c; + + if (get_user(c, data + i)) + return -EFAULT; + + if (c == 'V') + set_bit(WDT_FLAGS_EXPECT_CLOSE, + &wdt_flags); + } + } + + ath79_wdt_keepalive(); + } + + return len; +} + +static const struct watchdog_info ath79_wdt_info = { + .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | + WDIOF_MAGICCLOSE | WDIOF_CARDRESET, + .firmware_version = 0, + .identity = "ATH79 watchdog", +}; + +static long ath79_wdt_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) +{ + void __user *argp = (void __user *)arg; + int __user *p = argp; + int err; + int t; + + switch (cmd) { + case WDIOC_GETSUPPORT: + err = copy_to_user(argp, &ath79_wdt_info, + sizeof(ath79_wdt_info)) ? -EFAULT : 0; + break; + + case WDIOC_GETSTATUS: + err = put_user(0, p); + break; + + case WDIOC_GETBOOTSTATUS: + err = put_user(boot_status, p); + break; + + case WDIOC_KEEPALIVE: + ath79_wdt_keepalive(); + err = 0; + break; + + case WDIOC_SETTIMEOUT: + err = get_user(t, p); + if (err) + break; + + err = ath79_wdt_set_timeout(t); + if (err) + break; + + /* fallthrough */ + case WDIOC_GETTIMEOUT: + err = put_user(timeout, p); + break; + + default: + err = -ENOTTY; + break; + } + + return err; +} + +static const struct file_operations ath79_wdt_fops = { + .owner = THIS_MODULE, + .llseek = no_llseek, + .write = ath79_wdt_write, + .unlocked_ioctl = ath79_wdt_ioctl, + .open = ath79_wdt_open, + .release = ath79_wdt_release, +}; + +static struct miscdevice ath79_wdt_miscdev = { + .minor = WATCHDOG_MINOR, + .name = "watchdog", + .fops = &ath79_wdt_fops, +}; + +static int ath79_wdt_probe(struct platform_device *pdev) +{ + struct resource *res; + u32 ctrl; + int err; + + if (wdt_base) + return -EBUSY; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + wdt_base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(wdt_base)) + return PTR_ERR(wdt_base); + + wdt_clk = devm_clk_get(&pdev->dev, "wdt"); + if (IS_ERR(wdt_clk)) + return PTR_ERR(wdt_clk); + + err = clk_prepare_enable(wdt_clk); + if (err) + return err; + + wdt_freq = clk_get_rate(wdt_clk); + if (!wdt_freq) { + err = -EINVAL; + goto err_clk_disable; + } + + max_timeout = (0xfffffffful / wdt_freq); + if (timeout < 1 || timeout > max_timeout) { + timeout = max_timeout; + dev_info(&pdev->dev, + "timeout value must be 0 < timeout < %d, using %d\n", + max_timeout, timeout); + } + + ctrl = ath79_wdt_rr(WDOG_REG_CTRL); + boot_status = (ctrl & WDOG_CTRL_LAST_RESET) ? WDIOF_CARDRESET : 0; + + err = misc_register(&ath79_wdt_miscdev); + if (err) { + dev_err(&pdev->dev, + "unable to register misc device, err=%d\n", err); + goto err_clk_disable; + } + + return 0; + +err_clk_disable: + clk_disable_unprepare(wdt_clk); + return err; +} + +static int ath79_wdt_remove(struct platform_device *pdev) +{ + misc_deregister(&ath79_wdt_miscdev); + clk_disable_unprepare(wdt_clk); + return 0; +} + +static void ath97_wdt_shutdown(struct platform_device *pdev) +{ + ath79_wdt_disable(); +} + +#ifdef CONFIG_OF +static const struct of_device_id ath79_wdt_match[] = { + { .compatible = "qca,ar7130-wdt" }, + {}, +}; +MODULE_DEVICE_TABLE(of, ath79_wdt_match); +#endif + +static struct platform_driver ath79_wdt_driver = { + .probe = ath79_wdt_probe, + .remove = ath79_wdt_remove, + .shutdown = ath97_wdt_shutdown, + .driver = { + .name = DRIVER_NAME, + .of_match_table = of_match_ptr(ath79_wdt_match), + }, +}; + +module_platform_driver(ath79_wdt_driver); + +MODULE_DESCRIPTION("Atheros AR71XX/AR724X/AR913X hardware watchdog driver"); +MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org"); +MODULE_AUTHOR("Imre Kaloz <kaloz@openwrt.org"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:" DRIVER_NAME); diff --git a/drivers/watchdog/atlas7_wdt.c b/drivers/watchdog/atlas7_wdt.c new file mode 100644 index 000000000..4abdcabd8 --- /dev/null +++ b/drivers/watchdog/atlas7_wdt.c @@ -0,0 +1,247 @@ +/* + * Watchdog driver for CSR Atlas7 + * + * Copyright (c) 2015 Cambridge Silicon Radio Limited, a CSR plc group company. + * + * Licensed under GPLv2. + */ + +#include <linux/clk.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/watchdog.h> + +#define ATLAS7_TIMER_WDT_INDEX 5 +#define ATLAS7_WDT_DEFAULT_TIMEOUT 20 + +#define ATLAS7_WDT_CNT_CTRL (0 + 4 * ATLAS7_TIMER_WDT_INDEX) +#define ATLAS7_WDT_CNT_MATCH (0x18 + 4 * ATLAS7_TIMER_WDT_INDEX) +#define ATLAS7_WDT_CNT (0x48 + 4 * ATLAS7_TIMER_WDT_INDEX) +#define ATLAS7_WDT_CNT_EN (BIT(0) | BIT(1)) +#define ATLAS7_WDT_EN 0x64 + +static unsigned int timeout = ATLAS7_WDT_DEFAULT_TIMEOUT; +static bool nowayout = WATCHDOG_NOWAYOUT; + +module_param(timeout, uint, 0); +module_param(nowayout, bool, 0); + +MODULE_PARM_DESC(timeout, "Default watchdog timeout (in seconds)"); +MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); + +struct atlas7_wdog { + struct device *dev; + void __iomem *base; + unsigned long tick_rate; + struct clk *clk; +}; + +static unsigned int atlas7_wdt_gettimeleft(struct watchdog_device *wdd) +{ + struct atlas7_wdog *wdt = watchdog_get_drvdata(wdd); + u32 counter, match, delta; + + counter = readl(wdt->base + ATLAS7_WDT_CNT); + match = readl(wdt->base + ATLAS7_WDT_CNT_MATCH); + delta = match - counter; + + return delta / wdt->tick_rate; +} + +static int atlas7_wdt_ping(struct watchdog_device *wdd) +{ + struct atlas7_wdog *wdt = watchdog_get_drvdata(wdd); + u32 counter, match, delta; + + counter = readl(wdt->base + ATLAS7_WDT_CNT); + delta = wdd->timeout * wdt->tick_rate; + match = counter + delta; + + writel(match, wdt->base + ATLAS7_WDT_CNT_MATCH); + + return 0; +} + +static int atlas7_wdt_enable(struct watchdog_device *wdd) +{ + struct atlas7_wdog *wdt = watchdog_get_drvdata(wdd); + + atlas7_wdt_ping(wdd); + + writel(readl(wdt->base + ATLAS7_WDT_CNT_CTRL) | ATLAS7_WDT_CNT_EN, + wdt->base + ATLAS7_WDT_CNT_CTRL); + writel(1, wdt->base + ATLAS7_WDT_EN); + + return 0; +} + +static int atlas7_wdt_disable(struct watchdog_device *wdd) +{ + struct atlas7_wdog *wdt = watchdog_get_drvdata(wdd); + + writel(0, wdt->base + ATLAS7_WDT_EN); + writel(readl(wdt->base + ATLAS7_WDT_CNT_CTRL) & ~ATLAS7_WDT_CNT_EN, + wdt->base + ATLAS7_WDT_CNT_CTRL); + + return 0; +} + +static int atlas7_wdt_settimeout(struct watchdog_device *wdd, unsigned int to) +{ + wdd->timeout = to; + + return 0; +} + +#define OPTIONS (WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE) + +static const struct watchdog_info atlas7_wdt_ident = { + .options = OPTIONS, + .firmware_version = 0, + .identity = "atlas7 Watchdog", +}; + +static const struct watchdog_ops atlas7_wdt_ops = { + .owner = THIS_MODULE, + .start = atlas7_wdt_enable, + .stop = atlas7_wdt_disable, + .get_timeleft = atlas7_wdt_gettimeleft, + .ping = atlas7_wdt_ping, + .set_timeout = atlas7_wdt_settimeout, +}; + +static struct watchdog_device atlas7_wdd = { + .info = &atlas7_wdt_ident, + .ops = &atlas7_wdt_ops, + .timeout = ATLAS7_WDT_DEFAULT_TIMEOUT, +}; + +static const struct of_device_id atlas7_wdt_ids[] = { + { .compatible = "sirf,atlas7-tick"}, + {} +}; + +static int atlas7_wdt_probe(struct platform_device *pdev) +{ + struct device_node *np = pdev->dev.of_node; + struct atlas7_wdog *wdt; + struct resource *res; + struct clk *clk; + int ret; + + wdt = devm_kzalloc(&pdev->dev, sizeof(*wdt), GFP_KERNEL); + if (!wdt) + return -ENOMEM; + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + wdt->base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(wdt->base)) + return PTR_ERR(wdt->base); + + clk = of_clk_get(np, 0); + if (IS_ERR(clk)) + return PTR_ERR(clk); + ret = clk_prepare_enable(clk); + if (ret) { + dev_err(&pdev->dev, "clk enable failed\n"); + goto err; + } + + /* disable watchdog hardware */ + writel(0, wdt->base + ATLAS7_WDT_CNT_CTRL); + + wdt->tick_rate = clk_get_rate(clk); + if (!wdt->tick_rate) { + ret = -EINVAL; + goto err1; + } + + wdt->clk = clk; + atlas7_wdd.min_timeout = 1; + atlas7_wdd.max_timeout = UINT_MAX / wdt->tick_rate; + + watchdog_init_timeout(&atlas7_wdd, 0, &pdev->dev); + watchdog_set_nowayout(&atlas7_wdd, nowayout); + + watchdog_set_drvdata(&atlas7_wdd, wdt); + platform_set_drvdata(pdev, &atlas7_wdd); + + ret = watchdog_register_device(&atlas7_wdd); + if (ret) + goto err1; + + return 0; + +err1: + clk_disable_unprepare(clk); +err: + clk_put(clk); + return ret; +} + +static void atlas7_wdt_shutdown(struct platform_device *pdev) +{ + struct watchdog_device *wdd = platform_get_drvdata(pdev); + struct atlas7_wdog *wdt = watchdog_get_drvdata(wdd); + + atlas7_wdt_disable(wdd); + clk_disable_unprepare(wdt->clk); +} + +static int atlas7_wdt_remove(struct platform_device *pdev) +{ + struct watchdog_device *wdd = platform_get_drvdata(pdev); + struct atlas7_wdog *wdt = watchdog_get_drvdata(wdd); + + atlas7_wdt_shutdown(pdev); + clk_put(wdt->clk); + return 0; +} + +static int __maybe_unused atlas7_wdt_suspend(struct device *dev) +{ + /* + * NOTE:timer controller registers settings are saved + * and restored back by the timer-atlas7.c + */ + return 0; +} + +static int __maybe_unused atlas7_wdt_resume(struct device *dev) +{ + struct watchdog_device *wdd = dev_get_drvdata(dev); + + /* + * NOTE: Since timer controller registers settings are saved + * and restored back by the timer-atlas7.c, so we need not + * update WD settings except refreshing timeout. + */ + atlas7_wdt_ping(wdd); + + return 0; +} + +static SIMPLE_DEV_PM_OPS(atlas7_wdt_pm_ops, + atlas7_wdt_suspend, atlas7_wdt_resume); + +MODULE_DEVICE_TABLE(of, atlas7_wdt_ids); + +static struct platform_driver atlas7_wdt_driver = { + .driver = { + .name = "atlas7-wdt", + .pm = &atlas7_wdt_pm_ops, + .of_match_table = atlas7_wdt_ids, + }, + .probe = atlas7_wdt_probe, + .remove = atlas7_wdt_remove, + .shutdown = atlas7_wdt_shutdown, +}; +module_platform_driver(atlas7_wdt_driver); + +MODULE_DESCRIPTION("CSRatlas7 watchdog driver"); +MODULE_AUTHOR("Guo Zeng <Guo.Zeng@csr.com>"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:atlas7-wdt"); diff --git a/drivers/watchdog/bcm2835_wdt.c b/drivers/watchdog/bcm2835_wdt.c new file mode 100644 index 000000000..e6c27b71b --- /dev/null +++ b/drivers/watchdog/bcm2835_wdt.c @@ -0,0 +1,255 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Watchdog driver for Broadcom BCM2835 + * + * "bcm2708_wdog" driver written by Luke Diamand that was obtained from + * branch "rpi-3.6.y" of git://github.com/raspberrypi/linux.git was used + * as a hardware reference for the Broadcom BCM2835 watchdog timer. + * + * Copyright (C) 2013 Lubomir Rintel <lkundrak@v3.sk> + * + */ + +#include <linux/delay.h> +#include <linux/types.h> +#include <linux/module.h> +#include <linux/io.h> +#include <linux/watchdog.h> +#include <linux/platform_device.h> +#include <linux/of_address.h> +#include <linux/of_platform.h> + +#define PM_RSTC 0x1c +#define PM_RSTS 0x20 +#define PM_WDOG 0x24 + +#define PM_PASSWORD 0x5a000000 + +#define PM_WDOG_TIME_SET 0x000fffff +#define PM_RSTC_WRCFG_CLR 0xffffffcf +#define PM_RSTS_HADWRH_SET 0x00000040 +#define PM_RSTC_WRCFG_SET 0x00000030 +#define PM_RSTC_WRCFG_FULL_RESET 0x00000020 +#define PM_RSTC_RESET 0x00000102 + +/* + * The Raspberry Pi firmware uses the RSTS register to know which partition + * to boot from. The partition value is spread into bits 0, 2, 4, 6, 8, 10. + * Partition 63 is a special partition used by the firmware to indicate halt. + */ +#define PM_RSTS_RASPBERRYPI_HALT 0x555 + +#define SECS_TO_WDOG_TICKS(x) ((x) << 16) +#define WDOG_TICKS_TO_SECS(x) ((x) >> 16) + +struct bcm2835_wdt { + void __iomem *base; + spinlock_t lock; +}; + +static unsigned int heartbeat; +static bool nowayout = WATCHDOG_NOWAYOUT; + +static bool bcm2835_wdt_is_running(struct bcm2835_wdt *wdt) +{ + uint32_t cur; + + cur = readl(wdt->base + PM_RSTC); + + return !!(cur & PM_RSTC_WRCFG_FULL_RESET); +} + +static int bcm2835_wdt_start(struct watchdog_device *wdog) +{ + struct bcm2835_wdt *wdt = watchdog_get_drvdata(wdog); + uint32_t cur; + unsigned long flags; + + spin_lock_irqsave(&wdt->lock, flags); + + writel_relaxed(PM_PASSWORD | (SECS_TO_WDOG_TICKS(wdog->timeout) & + PM_WDOG_TIME_SET), wdt->base + PM_WDOG); + cur = readl_relaxed(wdt->base + PM_RSTC); + writel_relaxed(PM_PASSWORD | (cur & PM_RSTC_WRCFG_CLR) | + PM_RSTC_WRCFG_FULL_RESET, wdt->base + PM_RSTC); + + spin_unlock_irqrestore(&wdt->lock, flags); + + return 0; +} + +static int bcm2835_wdt_stop(struct watchdog_device *wdog) +{ + struct bcm2835_wdt *wdt = watchdog_get_drvdata(wdog); + + writel_relaxed(PM_PASSWORD | PM_RSTC_RESET, wdt->base + PM_RSTC); + return 0; +} + +static unsigned int bcm2835_wdt_get_timeleft(struct watchdog_device *wdog) +{ + struct bcm2835_wdt *wdt = watchdog_get_drvdata(wdog); + + uint32_t ret = readl_relaxed(wdt->base + PM_WDOG); + return WDOG_TICKS_TO_SECS(ret & PM_WDOG_TIME_SET); +} + +static void __bcm2835_restart(struct bcm2835_wdt *wdt) +{ + u32 val; + + /* use a timeout of 10 ticks (~150us) */ + writel_relaxed(10 | PM_PASSWORD, wdt->base + PM_WDOG); + val = readl_relaxed(wdt->base + PM_RSTC); + val &= PM_RSTC_WRCFG_CLR; + val |= PM_PASSWORD | PM_RSTC_WRCFG_FULL_RESET; + writel_relaxed(val, wdt->base + PM_RSTC); + + /* No sleeping, possibly atomic. */ + mdelay(1); +} + +static int bcm2835_restart(struct watchdog_device *wdog, + unsigned long action, void *data) +{ + struct bcm2835_wdt *wdt = watchdog_get_drvdata(wdog); + + __bcm2835_restart(wdt); + + return 0; +} + +static const struct watchdog_ops bcm2835_wdt_ops = { + .owner = THIS_MODULE, + .start = bcm2835_wdt_start, + .stop = bcm2835_wdt_stop, + .get_timeleft = bcm2835_wdt_get_timeleft, + .restart = bcm2835_restart, +}; + +static const struct watchdog_info bcm2835_wdt_info = { + .options = WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE | + WDIOF_KEEPALIVEPING, + .identity = "Broadcom BCM2835 Watchdog timer", +}; + +static struct watchdog_device bcm2835_wdt_wdd = { + .info = &bcm2835_wdt_info, + .ops = &bcm2835_wdt_ops, + .min_timeout = 1, + .max_timeout = WDOG_TICKS_TO_SECS(PM_WDOG_TIME_SET), + .timeout = WDOG_TICKS_TO_SECS(PM_WDOG_TIME_SET), +}; + +/* + * We can't really power off, but if we do the normal reset scheme, and + * indicate to bootcode.bin not to reboot, then most of the chip will be + * powered off. + */ +static void bcm2835_power_off(void) +{ + struct device_node *np = + of_find_compatible_node(NULL, NULL, "brcm,bcm2835-pm-wdt"); + struct platform_device *pdev = of_find_device_by_node(np); + struct bcm2835_wdt *wdt = platform_get_drvdata(pdev); + u32 val; + + /* + * We set the watchdog hard reset bit here to distinguish this reset + * from the normal (full) reset. bootcode.bin will not reboot after a + * hard reset. + */ + val = readl_relaxed(wdt->base + PM_RSTS); + val |= PM_PASSWORD | PM_RSTS_RASPBERRYPI_HALT; + writel_relaxed(val, wdt->base + PM_RSTS); + + /* Continue with normal reset mechanism */ + __bcm2835_restart(wdt); +} + +static int bcm2835_wdt_probe(struct platform_device *pdev) +{ + struct resource *res; + struct device *dev = &pdev->dev; + struct bcm2835_wdt *wdt; + int err; + + wdt = devm_kzalloc(dev, sizeof(struct bcm2835_wdt), GFP_KERNEL); + if (!wdt) + return -ENOMEM; + platform_set_drvdata(pdev, wdt); + + spin_lock_init(&wdt->lock); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + wdt->base = devm_ioremap_resource(dev, res); + if (IS_ERR(wdt->base)) + return PTR_ERR(wdt->base); + + watchdog_set_drvdata(&bcm2835_wdt_wdd, wdt); + watchdog_init_timeout(&bcm2835_wdt_wdd, heartbeat, dev); + watchdog_set_nowayout(&bcm2835_wdt_wdd, nowayout); + bcm2835_wdt_wdd.parent = dev; + if (bcm2835_wdt_is_running(wdt)) { + /* + * The currently active timeout value (set by the + * bootloader) may be different from the module + * heartbeat parameter or the value in device + * tree. But we just need to set WDOG_HW_RUNNING, + * because then the framework will "immediately" ping + * the device, updating the timeout. + */ + set_bit(WDOG_HW_RUNNING, &bcm2835_wdt_wdd.status); + } + + watchdog_set_restart_priority(&bcm2835_wdt_wdd, 128); + + watchdog_stop_on_reboot(&bcm2835_wdt_wdd); + err = devm_watchdog_register_device(dev, &bcm2835_wdt_wdd); + if (err) { + dev_err(dev, "Failed to register watchdog device"); + return err; + } + + if (pm_power_off == NULL) + pm_power_off = bcm2835_power_off; + + dev_info(dev, "Broadcom BCM2835 watchdog timer"); + return 0; +} + +static int bcm2835_wdt_remove(struct platform_device *pdev) +{ + if (pm_power_off == bcm2835_power_off) + pm_power_off = NULL; + + return 0; +} + +static const struct of_device_id bcm2835_wdt_of_match[] = { + { .compatible = "brcm,bcm2835-pm-wdt", }, + {}, +}; +MODULE_DEVICE_TABLE(of, bcm2835_wdt_of_match); + +static struct platform_driver bcm2835_wdt_driver = { + .probe = bcm2835_wdt_probe, + .remove = bcm2835_wdt_remove, + .driver = { + .name = "bcm2835-wdt", + .of_match_table = bcm2835_wdt_of_match, + }, +}; +module_platform_driver(bcm2835_wdt_driver); + +module_param(heartbeat, uint, 0); +MODULE_PARM_DESC(heartbeat, "Initial watchdog heartbeat in seconds"); + +module_param(nowayout, bool, 0); +MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); + +MODULE_ALIAS("platform:bcm2835-wdt"); +MODULE_AUTHOR("Lubomir Rintel <lkundrak@v3.sk>"); +MODULE_DESCRIPTION("Driver for Broadcom BCM2835 watchdog timer"); +MODULE_LICENSE("GPL"); diff --git a/drivers/watchdog/bcm47xx_wdt.c b/drivers/watchdog/bcm47xx_wdt.c new file mode 100644 index 000000000..05425c1df --- /dev/null +++ b/drivers/watchdog/bcm47xx_wdt.c @@ -0,0 +1,243 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Watchdog driver for Broadcom BCM47XX + * + * Copyright (C) 2008 Aleksandar Radovanovic <biblbroks@sezampro.rs> + * Copyright (C) 2009 Matthieu CASTET <castet.matthieu@free.fr> + * Copyright (C) 2012-2013 Hauke Mehrtens <hauke@hauke-m.de> + * + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/bcm47xx_wdt.h> +#include <linux/bitops.h> +#include <linux/errno.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/platform_device.h> +#include <linux/types.h> +#include <linux/watchdog.h> +#include <linux/timer.h> +#include <linux/jiffies.h> + +#define DRV_NAME "bcm47xx_wdt" + +#define WDT_DEFAULT_TIME 30 /* seconds */ +#define WDT_SOFTTIMER_MAX 255 /* seconds */ +#define WDT_SOFTTIMER_THRESHOLD 60 /* seconds */ + +static int timeout = WDT_DEFAULT_TIME; +static bool nowayout = WATCHDOG_NOWAYOUT; + +module_param(timeout, int, 0); +MODULE_PARM_DESC(timeout, "Watchdog time in seconds. (default=" + __MODULE_STRING(WDT_DEFAULT_TIME) ")"); + +module_param(nowayout, bool, 0); +MODULE_PARM_DESC(nowayout, + "Watchdog cannot be stopped once started (default=" + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); + +static inline struct bcm47xx_wdt *bcm47xx_wdt_get(struct watchdog_device *wdd) +{ + return container_of(wdd, struct bcm47xx_wdt, wdd); +} + +static int bcm47xx_wdt_hard_keepalive(struct watchdog_device *wdd) +{ + struct bcm47xx_wdt *wdt = bcm47xx_wdt_get(wdd); + + wdt->timer_set_ms(wdt, wdd->timeout * 1000); + + return 0; +} + +static int bcm47xx_wdt_hard_start(struct watchdog_device *wdd) +{ + return 0; +} + +static int bcm47xx_wdt_hard_stop(struct watchdog_device *wdd) +{ + struct bcm47xx_wdt *wdt = bcm47xx_wdt_get(wdd); + + wdt->timer_set(wdt, 0); + + return 0; +} + +static int bcm47xx_wdt_hard_set_timeout(struct watchdog_device *wdd, + unsigned int new_time) +{ + struct bcm47xx_wdt *wdt = bcm47xx_wdt_get(wdd); + u32 max_timer = wdt->max_timer_ms; + + if (new_time < 1 || new_time > max_timer / 1000) { + pr_warn("timeout value must be 1<=x<=%d, using %d\n", + max_timer / 1000, new_time); + return -EINVAL; + } + + wdd->timeout = new_time; + return 0; +} + +static int bcm47xx_wdt_restart(struct watchdog_device *wdd, + unsigned long action, void *data) +{ + struct bcm47xx_wdt *wdt = bcm47xx_wdt_get(wdd); + + wdt->timer_set(wdt, 1); + + return 0; +} + +static const struct watchdog_ops bcm47xx_wdt_hard_ops = { + .owner = THIS_MODULE, + .start = bcm47xx_wdt_hard_start, + .stop = bcm47xx_wdt_hard_stop, + .ping = bcm47xx_wdt_hard_keepalive, + .set_timeout = bcm47xx_wdt_hard_set_timeout, + .restart = bcm47xx_wdt_restart, +}; + +static void bcm47xx_wdt_soft_timer_tick(struct timer_list *t) +{ + struct bcm47xx_wdt *wdt = from_timer(wdt, t, soft_timer); + u32 next_tick = min(wdt->wdd.timeout * 1000, wdt->max_timer_ms); + + if (!atomic_dec_and_test(&wdt->soft_ticks)) { + wdt->timer_set_ms(wdt, next_tick); + mod_timer(&wdt->soft_timer, jiffies + HZ); + } else { + pr_crit("Watchdog will fire soon!!!\n"); + } +} + +static int bcm47xx_wdt_soft_keepalive(struct watchdog_device *wdd) +{ + struct bcm47xx_wdt *wdt = bcm47xx_wdt_get(wdd); + + atomic_set(&wdt->soft_ticks, wdd->timeout); + + return 0; +} + +static int bcm47xx_wdt_soft_start(struct watchdog_device *wdd) +{ + struct bcm47xx_wdt *wdt = bcm47xx_wdt_get(wdd); + + bcm47xx_wdt_soft_keepalive(wdd); + bcm47xx_wdt_soft_timer_tick(&wdt->soft_timer); + + return 0; +} + +static int bcm47xx_wdt_soft_stop(struct watchdog_device *wdd) +{ + struct bcm47xx_wdt *wdt = bcm47xx_wdt_get(wdd); + + del_timer_sync(&wdt->soft_timer); + wdt->timer_set(wdt, 0); + + return 0; +} + +static int bcm47xx_wdt_soft_set_timeout(struct watchdog_device *wdd, + unsigned int new_time) +{ + if (new_time < 1 || new_time > WDT_SOFTTIMER_MAX) { + pr_warn("timeout value must be 1<=x<=%d, using %d\n", + WDT_SOFTTIMER_MAX, new_time); + return -EINVAL; + } + + wdd->timeout = new_time; + return 0; +} + +static const struct watchdog_info bcm47xx_wdt_info = { + .identity = DRV_NAME, + .options = WDIOF_SETTIMEOUT | + WDIOF_KEEPALIVEPING | + WDIOF_MAGICCLOSE, +}; + +static const struct watchdog_ops bcm47xx_wdt_soft_ops = { + .owner = THIS_MODULE, + .start = bcm47xx_wdt_soft_start, + .stop = bcm47xx_wdt_soft_stop, + .ping = bcm47xx_wdt_soft_keepalive, + .set_timeout = bcm47xx_wdt_soft_set_timeout, + .restart = bcm47xx_wdt_restart, +}; + +static int bcm47xx_wdt_probe(struct platform_device *pdev) +{ + int ret; + bool soft; + struct bcm47xx_wdt *wdt = dev_get_platdata(&pdev->dev); + + if (!wdt) + return -ENXIO; + + soft = wdt->max_timer_ms < WDT_SOFTTIMER_THRESHOLD * 1000; + + if (soft) { + wdt->wdd.ops = &bcm47xx_wdt_soft_ops; + timer_setup(&wdt->soft_timer, bcm47xx_wdt_soft_timer_tick, 0); + } else { + wdt->wdd.ops = &bcm47xx_wdt_hard_ops; + } + + wdt->wdd.info = &bcm47xx_wdt_info; + wdt->wdd.timeout = WDT_DEFAULT_TIME; + wdt->wdd.parent = &pdev->dev; + ret = wdt->wdd.ops->set_timeout(&wdt->wdd, timeout); + if (ret) + goto err_timer; + watchdog_set_nowayout(&wdt->wdd, nowayout); + watchdog_set_restart_priority(&wdt->wdd, 64); + watchdog_stop_on_reboot(&wdt->wdd); + + ret = watchdog_register_device(&wdt->wdd); + if (ret) + goto err_timer; + + dev_info(&pdev->dev, "BCM47xx Watchdog Timer enabled (%d seconds%s%s)\n", + timeout, nowayout ? ", nowayout" : "", + soft ? ", Software Timer" : ""); + return 0; + +err_timer: + if (soft) + del_timer_sync(&wdt->soft_timer); + + return ret; +} + +static int bcm47xx_wdt_remove(struct platform_device *pdev) +{ + struct bcm47xx_wdt *wdt = dev_get_platdata(&pdev->dev); + + watchdog_unregister_device(&wdt->wdd); + + return 0; +} + +static struct platform_driver bcm47xx_wdt_driver = { + .driver = { + .name = "bcm47xx-wdt", + }, + .probe = bcm47xx_wdt_probe, + .remove = bcm47xx_wdt_remove, +}; + +module_platform_driver(bcm47xx_wdt_driver); + +MODULE_AUTHOR("Aleksandar Radovanovic"); +MODULE_AUTHOR("Hauke Mehrtens <hauke@hauke-m.de>"); +MODULE_DESCRIPTION("Watchdog driver for Broadcom BCM47xx"); +MODULE_LICENSE("GPL"); diff --git a/drivers/watchdog/bcm63xx_wdt.c b/drivers/watchdog/bcm63xx_wdt.c new file mode 100644 index 000000000..d3c1113e7 --- /dev/null +++ b/drivers/watchdog/bcm63xx_wdt.c @@ -0,0 +1,314 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Broadcom BCM63xx SoC watchdog driver + * + * Copyright (C) 2007, Miguel Gaio <miguel.gaio@efixo.com> + * Copyright (C) 2008, Florian Fainelli <florian@openwrt.org> + * + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/bitops.h> +#include <linux/errno.h> +#include <linux/fs.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/miscdevice.h> +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/types.h> +#include <linux/uaccess.h> +#include <linux/watchdog.h> +#include <linux/timer.h> +#include <linux/jiffies.h> +#include <linux/interrupt.h> +#include <linux/ptrace.h> +#include <linux/resource.h> +#include <linux/platform_device.h> + +#include <bcm63xx_cpu.h> +#include <bcm63xx_io.h> +#include <bcm63xx_regs.h> +#include <bcm63xx_timer.h> + +#define PFX KBUILD_MODNAME + +#define WDT_HZ 50000000 /* Fclk */ +#define WDT_DEFAULT_TIME 30 /* seconds */ +#define WDT_MAX_TIME 256 /* seconds */ + +static struct { + void __iomem *regs; + struct timer_list timer; + unsigned long inuse; + atomic_t ticks; +} bcm63xx_wdt_device; + +static int expect_close; + +static int wdt_time = WDT_DEFAULT_TIME; +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); +MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); + +/* HW functions */ +static void bcm63xx_wdt_hw_start(void) +{ + bcm_writel(0xfffffffe, bcm63xx_wdt_device.regs + WDT_DEFVAL_REG); + bcm_writel(WDT_START_1, bcm63xx_wdt_device.regs + WDT_CTL_REG); + bcm_writel(WDT_START_2, bcm63xx_wdt_device.regs + WDT_CTL_REG); +} + +static void bcm63xx_wdt_hw_stop(void) +{ + bcm_writel(WDT_STOP_1, bcm63xx_wdt_device.regs + WDT_CTL_REG); + bcm_writel(WDT_STOP_2, bcm63xx_wdt_device.regs + WDT_CTL_REG); +} + +static void bcm63xx_wdt_isr(void *data) +{ + struct pt_regs *regs = get_irq_regs(); + + die(PFX " fire", regs); +} + +static void bcm63xx_timer_tick(struct timer_list *unused) +{ + if (!atomic_dec_and_test(&bcm63xx_wdt_device.ticks)) { + bcm63xx_wdt_hw_start(); + mod_timer(&bcm63xx_wdt_device.timer, jiffies + HZ); + } else + pr_crit("watchdog will restart system\n"); +} + +static void bcm63xx_wdt_pet(void) +{ + atomic_set(&bcm63xx_wdt_device.ticks, wdt_time); +} + +static void bcm63xx_wdt_start(void) +{ + bcm63xx_wdt_pet(); + bcm63xx_timer_tick(0); +} + +static void bcm63xx_wdt_pause(void) +{ + del_timer_sync(&bcm63xx_wdt_device.timer); + bcm63xx_wdt_hw_stop(); +} + +static int bcm63xx_wdt_settimeout(int new_time) +{ + if ((new_time <= 0) || (new_time > WDT_MAX_TIME)) + return -EINVAL; + + wdt_time = new_time; + + return 0; +} + +static int bcm63xx_wdt_open(struct inode *inode, struct file *file) +{ + if (test_and_set_bit(0, &bcm63xx_wdt_device.inuse)) + return -EBUSY; + + bcm63xx_wdt_start(); + return nonseekable_open(inode, file); +} + +static int bcm63xx_wdt_release(struct inode *inode, struct file *file) +{ + if (expect_close == 42) + bcm63xx_wdt_pause(); + else { + pr_crit("Unexpected close, not stopping watchdog!\n"); + bcm63xx_wdt_start(); + } + clear_bit(0, &bcm63xx_wdt_device.inuse); + expect_close = 0; + return 0; +} + +static ssize_t bcm63xx_wdt_write(struct file *file, const char *data, + size_t len, loff_t *ppos) +{ + if (len) { + if (!nowayout) { + size_t i; + + /* In case it was set long ago */ + expect_close = 0; + + for (i = 0; i != len; i++) { + char c; + if (get_user(c, data + i)) + return -EFAULT; + if (c == 'V') + expect_close = 42; + } + } + bcm63xx_wdt_pet(); + } + return len; +} + +static struct watchdog_info bcm63xx_wdt_info = { + .identity = PFX, + .options = WDIOF_SETTIMEOUT | + WDIOF_KEEPALIVEPING | + WDIOF_MAGICCLOSE, +}; + + +static long bcm63xx_wdt_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) +{ + void __user *argp = (void __user *)arg; + int __user *p = argp; + int new_value, retval = -EINVAL; + + switch (cmd) { + case WDIOC_GETSUPPORT: + return copy_to_user(argp, &bcm63xx_wdt_info, + sizeof(bcm63xx_wdt_info)) ? -EFAULT : 0; + + case WDIOC_GETSTATUS: + case WDIOC_GETBOOTSTATUS: + return put_user(0, p); + + case WDIOC_SETOPTIONS: + if (get_user(new_value, p)) + return -EFAULT; + + if (new_value & WDIOS_DISABLECARD) { + bcm63xx_wdt_pause(); + retval = 0; + } + if (new_value & WDIOS_ENABLECARD) { + bcm63xx_wdt_start(); + retval = 0; + } + + return retval; + + case WDIOC_KEEPALIVE: + bcm63xx_wdt_pet(); + return 0; + + case WDIOC_SETTIMEOUT: + if (get_user(new_value, p)) + return -EFAULT; + + if (bcm63xx_wdt_settimeout(new_value)) + return -EINVAL; + + bcm63xx_wdt_pet(); + + case WDIOC_GETTIMEOUT: + return put_user(wdt_time, p); + + default: + return -ENOTTY; + + } +} + +static const struct file_operations bcm63xx_wdt_fops = { + .owner = THIS_MODULE, + .llseek = no_llseek, + .write = bcm63xx_wdt_write, + .unlocked_ioctl = bcm63xx_wdt_ioctl, + .open = bcm63xx_wdt_open, + .release = bcm63xx_wdt_release, +}; + +static struct miscdevice bcm63xx_wdt_miscdev = { + .minor = WATCHDOG_MINOR, + .name = "watchdog", + .fops = &bcm63xx_wdt_fops, +}; + + +static int bcm63xx_wdt_probe(struct platform_device *pdev) +{ + int ret; + struct resource *r; + + timer_setup(&bcm63xx_wdt_device.timer, bcm63xx_timer_tick, 0); + + r = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!r) { + dev_err(&pdev->dev, "failed to get resources\n"); + return -ENODEV; + } + + bcm63xx_wdt_device.regs = devm_ioremap_nocache(&pdev->dev, r->start, + resource_size(r)); + if (!bcm63xx_wdt_device.regs) { + dev_err(&pdev->dev, "failed to remap I/O resources\n"); + return -ENXIO; + } + + ret = bcm63xx_timer_register(TIMER_WDT_ID, bcm63xx_wdt_isr, NULL); + if (ret < 0) { + dev_err(&pdev->dev, "failed to register wdt timer isr\n"); + return ret; + } + + if (bcm63xx_wdt_settimeout(wdt_time)) { + bcm63xx_wdt_settimeout(WDT_DEFAULT_TIME); + dev_info(&pdev->dev, + ": wdt_time value must be 1 <= wdt_time <= 256, using %d\n", + wdt_time); + } + + ret = misc_register(&bcm63xx_wdt_miscdev); + if (ret < 0) { + dev_err(&pdev->dev, "failed to register watchdog device\n"); + goto unregister_timer; + } + + dev_info(&pdev->dev, " started, timer margin: %d sec\n", + WDT_DEFAULT_TIME); + + return 0; + +unregister_timer: + bcm63xx_timer_unregister(TIMER_WDT_ID); + return ret; +} + +static int bcm63xx_wdt_remove(struct platform_device *pdev) +{ + if (!nowayout) + bcm63xx_wdt_pause(); + + misc_deregister(&bcm63xx_wdt_miscdev); + bcm63xx_timer_unregister(TIMER_WDT_ID); + return 0; +} + +static void bcm63xx_wdt_shutdown(struct platform_device *pdev) +{ + bcm63xx_wdt_pause(); +} + +static struct platform_driver bcm63xx_wdt_driver = { + .probe = bcm63xx_wdt_probe, + .remove = bcm63xx_wdt_remove, + .shutdown = bcm63xx_wdt_shutdown, + .driver = { + .name = "bcm63xx-wdt", + } +}; + +module_platform_driver(bcm63xx_wdt_driver); + +MODULE_AUTHOR("Miguel Gaio <miguel.gaio@efixo.com>"); +MODULE_AUTHOR("Florian Fainelli <florian@openwrt.org>"); +MODULE_DESCRIPTION("Driver for the Broadcom BCM63xx SoC watchdog"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:bcm63xx-wdt"); diff --git a/drivers/watchdog/bcm7038_wdt.c b/drivers/watchdog/bcm7038_wdt.c new file mode 100644 index 000000000..ce3f646e8 --- /dev/null +++ b/drivers/watchdog/bcm7038_wdt.c @@ -0,0 +1,232 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2015 Broadcom Corporation + * + */ + +#include <linux/clk.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/pm.h> +#include <linux/watchdog.h> + +#define WDT_START_1 0xff00 +#define WDT_START_2 0x00ff +#define WDT_STOP_1 0xee00 +#define WDT_STOP_2 0x00ee + +#define WDT_TIMEOUT_REG 0x0 +#define WDT_CMD_REG 0x4 + +#define WDT_MIN_TIMEOUT 1 /* seconds */ +#define WDT_DEFAULT_TIMEOUT 30 /* seconds */ +#define WDT_DEFAULT_RATE 27000000 + +struct bcm7038_watchdog { + void __iomem *base; + struct watchdog_device wdd; + u32 rate; + struct clk *clk; +}; + +static bool nowayout = WATCHDOG_NOWAYOUT; + +static void bcm7038_wdt_set_timeout_reg(struct watchdog_device *wdog) +{ + struct bcm7038_watchdog *wdt = watchdog_get_drvdata(wdog); + u32 timeout; + + timeout = wdt->rate * wdog->timeout; + + writel(timeout, wdt->base + WDT_TIMEOUT_REG); +} + +static int bcm7038_wdt_ping(struct watchdog_device *wdog) +{ + struct bcm7038_watchdog *wdt = watchdog_get_drvdata(wdog); + + writel(WDT_START_1, wdt->base + WDT_CMD_REG); + writel(WDT_START_2, wdt->base + WDT_CMD_REG); + + return 0; +} + +static int bcm7038_wdt_start(struct watchdog_device *wdog) +{ + bcm7038_wdt_set_timeout_reg(wdog); + bcm7038_wdt_ping(wdog); + + return 0; +} + +static int bcm7038_wdt_stop(struct watchdog_device *wdog) +{ + struct bcm7038_watchdog *wdt = watchdog_get_drvdata(wdog); + + writel(WDT_STOP_1, wdt->base + WDT_CMD_REG); + writel(WDT_STOP_2, wdt->base + WDT_CMD_REG); + + return 0; +} + +static int bcm7038_wdt_set_timeout(struct watchdog_device *wdog, + unsigned int t) +{ + /* Can't modify timeout value if watchdog timer is running */ + bcm7038_wdt_stop(wdog); + wdog->timeout = t; + bcm7038_wdt_start(wdog); + + return 0; +} + +static unsigned int bcm7038_wdt_get_timeleft(struct watchdog_device *wdog) +{ + struct bcm7038_watchdog *wdt = watchdog_get_drvdata(wdog); + u32 time_left; + + time_left = readl(wdt->base + WDT_CMD_REG); + + return time_left / wdt->rate; +} + +static const struct watchdog_info bcm7038_wdt_info = { + .identity = "Broadcom BCM7038 Watchdog Timer", + .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | + WDIOF_MAGICCLOSE +}; + +static const struct watchdog_ops bcm7038_wdt_ops = { + .owner = THIS_MODULE, + .start = bcm7038_wdt_start, + .stop = bcm7038_wdt_stop, + .set_timeout = bcm7038_wdt_set_timeout, + .get_timeleft = bcm7038_wdt_get_timeleft, +}; + +static int bcm7038_wdt_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct bcm7038_watchdog *wdt; + struct resource *res; + int err; + + wdt = devm_kzalloc(dev, sizeof(*wdt), GFP_KERNEL); + if (!wdt) + return -ENOMEM; + + platform_set_drvdata(pdev, wdt); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + wdt->base = devm_ioremap_resource(dev, res); + if (IS_ERR(wdt->base)) + return PTR_ERR(wdt->base); + + wdt->clk = devm_clk_get(dev, NULL); + /* If unable to get clock, use default frequency */ + if (!IS_ERR(wdt->clk)) { + err = clk_prepare_enable(wdt->clk); + if (err) + return err; + wdt->rate = clk_get_rate(wdt->clk); + /* Prevent divide-by-zero exception */ + if (!wdt->rate) + wdt->rate = WDT_DEFAULT_RATE; + } else { + wdt->rate = WDT_DEFAULT_RATE; + wdt->clk = NULL; + } + + wdt->wdd.info = &bcm7038_wdt_info; + wdt->wdd.ops = &bcm7038_wdt_ops; + wdt->wdd.min_timeout = WDT_MIN_TIMEOUT; + wdt->wdd.timeout = WDT_DEFAULT_TIMEOUT; + wdt->wdd.max_timeout = 0xffffffff / wdt->rate; + wdt->wdd.parent = dev; + watchdog_set_drvdata(&wdt->wdd, wdt); + + err = watchdog_register_device(&wdt->wdd); + if (err) { + dev_err(dev, "Failed to register watchdog device\n"); + clk_disable_unprepare(wdt->clk); + return err; + } + + dev_info(dev, "Registered BCM7038 Watchdog\n"); + + return 0; +} + +static int bcm7038_wdt_remove(struct platform_device *pdev) +{ + struct bcm7038_watchdog *wdt = platform_get_drvdata(pdev); + + if (!nowayout) + bcm7038_wdt_stop(&wdt->wdd); + + watchdog_unregister_device(&wdt->wdd); + clk_disable_unprepare(wdt->clk); + + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int bcm7038_wdt_suspend(struct device *dev) +{ + struct bcm7038_watchdog *wdt = dev_get_drvdata(dev); + + if (watchdog_active(&wdt->wdd)) + return bcm7038_wdt_stop(&wdt->wdd); + + return 0; +} + +static int bcm7038_wdt_resume(struct device *dev) +{ + struct bcm7038_watchdog *wdt = dev_get_drvdata(dev); + + if (watchdog_active(&wdt->wdd)) + return bcm7038_wdt_start(&wdt->wdd); + + return 0; +} +#endif + +static SIMPLE_DEV_PM_OPS(bcm7038_wdt_pm_ops, bcm7038_wdt_suspend, + bcm7038_wdt_resume); + +static void bcm7038_wdt_shutdown(struct platform_device *pdev) +{ + struct bcm7038_watchdog *wdt = platform_get_drvdata(pdev); + + if (watchdog_active(&wdt->wdd)) + bcm7038_wdt_stop(&wdt->wdd); +} + +static const struct of_device_id bcm7038_wdt_match[] = { + { .compatible = "brcm,bcm7038-wdt" }, + {}, +}; +MODULE_DEVICE_TABLE(of, bcm7038_wdt_match); + +static struct platform_driver bcm7038_wdt_driver = { + .probe = bcm7038_wdt_probe, + .remove = bcm7038_wdt_remove, + .shutdown = bcm7038_wdt_shutdown, + .driver = { + .name = "bcm7038-wdt", + .of_match_table = bcm7038_wdt_match, + .pm = &bcm7038_wdt_pm_ops, + } +}; +module_platform_driver(bcm7038_wdt_driver); + +module_param(nowayout, bool, 0); +MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("Driver for Broadcom 7038 SoCs Watchdog"); +MODULE_AUTHOR("Justin Chen"); diff --git a/drivers/watchdog/bcm_kona_wdt.c b/drivers/watchdog/bcm_kona_wdt.c new file mode 100644 index 000000000..1462be9e6 --- /dev/null +++ b/drivers/watchdog/bcm_kona_wdt.c @@ -0,0 +1,367 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2013 Broadcom Corporation + * + */ + +#include <linux/debugfs.h> +#include <linux/delay.h> +#include <linux/err.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/of_address.h> +#include <linux/platform_device.h> +#include <linux/watchdog.h> + +#define SECWDOG_CTRL_REG 0x00000000 +#define SECWDOG_COUNT_REG 0x00000004 + +#define SECWDOG_RESERVED_MASK 0x1dffffff +#define SECWDOG_WD_LOAD_FLAG 0x10000000 +#define SECWDOG_EN_MASK 0x08000000 +#define SECWDOG_SRSTEN_MASK 0x04000000 +#define SECWDOG_RES_MASK 0x00f00000 +#define SECWDOG_COUNT_MASK 0x000fffff + +#define SECWDOG_MAX_COUNT SECWDOG_COUNT_MASK +#define SECWDOG_CLKS_SHIFT 20 +#define SECWDOG_MAX_RES 15 +#define SECWDOG_DEFAULT_RESOLUTION 4 +#define SECWDOG_MAX_TRY 1000 + +#define SECS_TO_TICKS(x, w) ((x) << (w)->resolution) +#define TICKS_TO_SECS(x, w) ((x) >> (w)->resolution) + +#define BCM_KONA_WDT_NAME "bcm_kona_wdt" + +struct bcm_kona_wdt { + void __iomem *base; + /* + * One watchdog tick is 1/(2^resolution) seconds. Resolution can take + * the values 0-15, meaning one tick can be 1s to 30.52us. Our default + * resolution of 4 means one tick is 62.5ms. + * + * The watchdog counter is 20 bits. Depending on resolution, the maximum + * counter value of 0xfffff expires after about 12 days (resolution 0) + * down to only 32s (resolution 15). The default resolution of 4 gives + * us a maximum of about 18 hours and 12 minutes before the watchdog + * times out. + */ + int resolution; + spinlock_t lock; +#ifdef CONFIG_BCM_KONA_WDT_DEBUG + unsigned long busy_count; + struct dentry *debugfs; +#endif +}; + +static int secure_register_read(struct bcm_kona_wdt *wdt, uint32_t offset) +{ + uint32_t val; + unsigned count = 0; + + /* + * If the WD_LOAD_FLAG is set, the watchdog counter field is being + * updated in hardware. Once the WD timer is updated in hardware, it + * gets cleared. + */ + do { + if (unlikely(count > 1)) + udelay(5); + val = readl_relaxed(wdt->base + offset); + count++; + } while ((val & SECWDOG_WD_LOAD_FLAG) && count < SECWDOG_MAX_TRY); + +#ifdef CONFIG_BCM_KONA_WDT_DEBUG + /* Remember the maximum number iterations due to WD_LOAD_FLAG */ + if (count > wdt->busy_count) + wdt->busy_count = count; +#endif + + /* This is the only place we return a negative value. */ + if (val & SECWDOG_WD_LOAD_FLAG) + return -ETIMEDOUT; + + /* We always mask out reserved bits. */ + val &= SECWDOG_RESERVED_MASK; + + return val; +} + +#ifdef CONFIG_BCM_KONA_WDT_DEBUG + +static int bcm_kona_wdt_dbg_show(struct seq_file *s, void *data) +{ + int ctl_val, cur_val; + unsigned long flags; + struct bcm_kona_wdt *wdt = s->private; + + if (!wdt) { + seq_puts(s, "No device pointer\n"); + return 0; + } + + spin_lock_irqsave(&wdt->lock, flags); + ctl_val = secure_register_read(wdt, SECWDOG_CTRL_REG); + cur_val = secure_register_read(wdt, SECWDOG_COUNT_REG); + spin_unlock_irqrestore(&wdt->lock, flags); + + if (ctl_val < 0 || cur_val < 0) { + seq_puts(s, "Error accessing hardware\n"); + } else { + int ctl, cur, ctl_sec, cur_sec, res; + + ctl = ctl_val & SECWDOG_COUNT_MASK; + res = (ctl_val & SECWDOG_RES_MASK) >> SECWDOG_CLKS_SHIFT; + cur = cur_val & SECWDOG_COUNT_MASK; + ctl_sec = TICKS_TO_SECS(ctl, wdt); + cur_sec = TICKS_TO_SECS(cur, wdt); + seq_printf(s, + "Resolution: %d / %d\n" + "Control: %d s / %d (%#x) ticks\n" + "Current: %d s / %d (%#x) ticks\n" + "Busy count: %lu\n", + res, wdt->resolution, + ctl_sec, ctl, ctl, + cur_sec, cur, cur, + wdt->busy_count); + } + + return 0; +} + +static int bcm_kona_dbg_open(struct inode *inode, struct file *file) +{ + return single_open(file, bcm_kona_wdt_dbg_show, inode->i_private); +} + +static const struct file_operations bcm_kona_dbg_operations = { + .open = bcm_kona_dbg_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static void bcm_kona_wdt_debug_init(struct platform_device *pdev) +{ + struct dentry *dir; + struct bcm_kona_wdt *wdt = platform_get_drvdata(pdev); + + if (!wdt) + return; + + wdt->debugfs = NULL; + + dir = debugfs_create_dir(BCM_KONA_WDT_NAME, NULL); + if (IS_ERR_OR_NULL(dir)) + return; + + if (debugfs_create_file("info", S_IFREG | S_IRUGO, dir, wdt, + &bcm_kona_dbg_operations)) + wdt->debugfs = dir; + else + debugfs_remove_recursive(dir); +} + +static void bcm_kona_wdt_debug_exit(struct platform_device *pdev) +{ + struct bcm_kona_wdt *wdt = platform_get_drvdata(pdev); + + if (wdt && wdt->debugfs) { + debugfs_remove_recursive(wdt->debugfs); + wdt->debugfs = NULL; + } +} + +#else + +static void bcm_kona_wdt_debug_init(struct platform_device *pdev) {} +static void bcm_kona_wdt_debug_exit(struct platform_device *pdev) {} + +#endif /* CONFIG_BCM_KONA_WDT_DEBUG */ + +static int bcm_kona_wdt_ctrl_reg_modify(struct bcm_kona_wdt *wdt, + unsigned mask, unsigned newval) +{ + int val; + unsigned long flags; + int ret = 0; + + spin_lock_irqsave(&wdt->lock, flags); + + val = secure_register_read(wdt, SECWDOG_CTRL_REG); + if (val < 0) { + ret = val; + } else { + val &= ~mask; + val |= newval; + writel_relaxed(val, wdt->base + SECWDOG_CTRL_REG); + } + + spin_unlock_irqrestore(&wdt->lock, flags); + + return ret; +} + +static int bcm_kona_wdt_set_resolution_reg(struct bcm_kona_wdt *wdt) +{ + if (wdt->resolution > SECWDOG_MAX_RES) + return -EINVAL; + + return bcm_kona_wdt_ctrl_reg_modify(wdt, SECWDOG_RES_MASK, + wdt->resolution << SECWDOG_CLKS_SHIFT); +} + +static int bcm_kona_wdt_set_timeout_reg(struct watchdog_device *wdog, + unsigned watchdog_flags) +{ + struct bcm_kona_wdt *wdt = watchdog_get_drvdata(wdog); + + return bcm_kona_wdt_ctrl_reg_modify(wdt, SECWDOG_COUNT_MASK, + SECS_TO_TICKS(wdog->timeout, wdt) | + watchdog_flags); +} + +static int bcm_kona_wdt_set_timeout(struct watchdog_device *wdog, + unsigned int t) +{ + wdog->timeout = t; + return 0; +} + +static unsigned int bcm_kona_wdt_get_timeleft(struct watchdog_device *wdog) +{ + struct bcm_kona_wdt *wdt = watchdog_get_drvdata(wdog); + int val; + unsigned long flags; + + spin_lock_irqsave(&wdt->lock, flags); + val = secure_register_read(wdt, SECWDOG_COUNT_REG); + spin_unlock_irqrestore(&wdt->lock, flags); + + if (val < 0) + return val; + + return TICKS_TO_SECS(val & SECWDOG_COUNT_MASK, wdt); +} + +static int bcm_kona_wdt_start(struct watchdog_device *wdog) +{ + return bcm_kona_wdt_set_timeout_reg(wdog, + SECWDOG_EN_MASK | SECWDOG_SRSTEN_MASK); +} + +static int bcm_kona_wdt_stop(struct watchdog_device *wdog) +{ + struct bcm_kona_wdt *wdt = watchdog_get_drvdata(wdog); + + return bcm_kona_wdt_ctrl_reg_modify(wdt, SECWDOG_EN_MASK | + SECWDOG_SRSTEN_MASK, 0); +} + +static const struct watchdog_ops bcm_kona_wdt_ops = { + .owner = THIS_MODULE, + .start = bcm_kona_wdt_start, + .stop = bcm_kona_wdt_stop, + .set_timeout = bcm_kona_wdt_set_timeout, + .get_timeleft = bcm_kona_wdt_get_timeleft, +}; + +static const struct watchdog_info bcm_kona_wdt_info = { + .options = WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE | + WDIOF_KEEPALIVEPING, + .identity = "Broadcom Kona Watchdog Timer", +}; + +static struct watchdog_device bcm_kona_wdt_wdd = { + .info = &bcm_kona_wdt_info, + .ops = &bcm_kona_wdt_ops, + .min_timeout = 1, + .max_timeout = SECWDOG_MAX_COUNT >> SECWDOG_DEFAULT_RESOLUTION, + .timeout = SECWDOG_MAX_COUNT >> SECWDOG_DEFAULT_RESOLUTION, +}; + +static void bcm_kona_wdt_shutdown(struct platform_device *pdev) +{ + bcm_kona_wdt_stop(&bcm_kona_wdt_wdd); +} + +static int bcm_kona_wdt_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct bcm_kona_wdt *wdt; + struct resource *res; + int ret; + + wdt = devm_kzalloc(dev, sizeof(*wdt), GFP_KERNEL); + if (!wdt) + return -ENOMEM; + + spin_lock_init(&wdt->lock); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + wdt->base = devm_ioremap_resource(dev, res); + if (IS_ERR(wdt->base)) + return -ENODEV; + + wdt->resolution = SECWDOG_DEFAULT_RESOLUTION; + ret = bcm_kona_wdt_set_resolution_reg(wdt); + if (ret) { + dev_err(dev, "Failed to set resolution (error: %d)", ret); + return ret; + } + + platform_set_drvdata(pdev, wdt); + watchdog_set_drvdata(&bcm_kona_wdt_wdd, wdt); + bcm_kona_wdt_wdd.parent = &pdev->dev; + + ret = bcm_kona_wdt_set_timeout_reg(&bcm_kona_wdt_wdd, 0); + if (ret) { + dev_err(dev, "Failed set watchdog timeout"); + return ret; + } + + ret = watchdog_register_device(&bcm_kona_wdt_wdd); + if (ret) { + dev_err(dev, "Failed to register watchdog device"); + return ret; + } + + bcm_kona_wdt_debug_init(pdev); + dev_dbg(dev, "Broadcom Kona Watchdog Timer"); + + return 0; +} + +static int bcm_kona_wdt_remove(struct platform_device *pdev) +{ + bcm_kona_wdt_debug_exit(pdev); + bcm_kona_wdt_shutdown(pdev); + watchdog_unregister_device(&bcm_kona_wdt_wdd); + dev_dbg(&pdev->dev, "Watchdog driver disabled"); + + return 0; +} + +static const struct of_device_id bcm_kona_wdt_of_match[] = { + { .compatible = "brcm,kona-wdt", }, + {}, +}; +MODULE_DEVICE_TABLE(of, bcm_kona_wdt_of_match); + +static struct platform_driver bcm_kona_wdt_driver = { + .driver = { + .name = BCM_KONA_WDT_NAME, + .of_match_table = bcm_kona_wdt_of_match, + }, + .probe = bcm_kona_wdt_probe, + .remove = bcm_kona_wdt_remove, + .shutdown = bcm_kona_wdt_shutdown, +}; + +module_platform_driver(bcm_kona_wdt_driver); + +MODULE_ALIAS("platform:" BCM_KONA_WDT_NAME); +MODULE_AUTHOR("Markus Mayer <mmayer@broadcom.com>"); +MODULE_DESCRIPTION("Broadcom Kona Watchdog Driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/watchdog/booke_wdt.c b/drivers/watchdog/booke_wdt.c new file mode 100644 index 000000000..3ad1e44be --- /dev/null +++ b/drivers/watchdog/booke_wdt.c @@ -0,0 +1,243 @@ +/* + * Watchdog timer for PowerPC Book-E systems + * + * Author: Matthew McClintock + * Maintainer: Kumar Gala <galak@kernel.crashing.org> + * + * Copyright 2005, 2008, 2010-2011 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/module.h> +#include <linux/smp.h> +#include <linux/watchdog.h> + +#include <asm/reg_booke.h> +#include <asm/time.h> +#include <asm/div64.h> + +/* If the kernel parameter wdt=1, the watchdog will be enabled at boot. + * Also, the wdt_period sets the watchdog timer period timeout. + * For E500 cpus the wdt_period sets which bit changing from 0->1 will + * trigger a watchog timeout. This watchdog timeout will occur 3 times, the + * first time nothing will happen, the second time a watchdog exception will + * occur, and the final time the board will reset. + */ + + +#ifdef CONFIG_PPC_FSL_BOOK3E +#define WDTP(x) ((((x)&0x3)<<30)|(((x)&0x3c)<<15)) +#define WDTP_MASK (WDTP(0x3f)) +#else +#define WDTP(x) (TCR_WP(x)) +#define WDTP_MASK (TCR_WP_MASK) +#endif + +static bool booke_wdt_enabled; +module_param(booke_wdt_enabled, bool, 0); +static int booke_wdt_period = CONFIG_BOOKE_WDT_DEFAULT_TIMEOUT; +module_param(booke_wdt_period, int, 0); + +#ifdef CONFIG_PPC_FSL_BOOK3E + +/* For the specified period, determine the number of seconds + * corresponding to the reset time. There will be a watchdog + * exception at approximately 3/5 of this time. + * + * The formula to calculate this is given by: + * 2.5 * (2^(63-period+1)) / timebase_freq + * + * In order to simplify things, we assume that period is + * at least 1. This will still result in a very long timeout. + */ +static unsigned long long period_to_sec(unsigned int period) +{ + unsigned long long tmp = 1ULL << (64 - period); + unsigned long tmp2 = ppc_tb_freq; + + /* tmp may be a very large number and we don't want to overflow, + * so divide the timebase freq instead of multiplying tmp + */ + tmp2 = tmp2 / 5 * 2; + + do_div(tmp, tmp2); + return tmp; +} + +/* + * This procedure will find the highest period which will give a timeout + * greater than the one required. e.g. for a bus speed of 66666666 and + * and a parameter of 2 secs, then this procedure will return a value of 38. + */ +static unsigned int sec_to_period(unsigned int secs) +{ + unsigned int period; + for (period = 63; period > 0; period--) { + if (period_to_sec(period) >= secs) + return period; + } + return 0; +} + +#define MAX_WDT_TIMEOUT period_to_sec(1) + +#else /* CONFIG_PPC_FSL_BOOK3E */ + +static unsigned long long period_to_sec(unsigned int period) +{ + return period; +} + +static unsigned int sec_to_period(unsigned int secs) +{ + return secs; +} + +#define MAX_WDT_TIMEOUT 3 /* from Kconfig */ + +#endif /* !CONFIG_PPC_FSL_BOOK3E */ + +static void __booke_wdt_set(void *data) +{ + u32 val; + struct watchdog_device *wdog = data; + + val = mfspr(SPRN_TCR); + val &= ~WDTP_MASK; + val |= WDTP(sec_to_period(wdog->timeout)); + + mtspr(SPRN_TCR, val); +} + +static void booke_wdt_set(void *data) +{ + on_each_cpu(__booke_wdt_set, data, 0); +} + +static void __booke_wdt_ping(void *data) +{ + mtspr(SPRN_TSR, TSR_ENW|TSR_WIS); +} + +static int booke_wdt_ping(struct watchdog_device *wdog) +{ + on_each_cpu(__booke_wdt_ping, NULL, 0); + + return 0; +} + +static void __booke_wdt_enable(void *data) +{ + u32 val; + struct watchdog_device *wdog = data; + + /* clear status before enabling watchdog */ + __booke_wdt_ping(NULL); + val = mfspr(SPRN_TCR); + val &= ~WDTP_MASK; + val |= (TCR_WIE|TCR_WRC(WRC_CHIP)|WDTP(sec_to_period(wdog->timeout))); + + mtspr(SPRN_TCR, val); +} + +/** + * booke_wdt_disable - disable the watchdog on the given CPU + * + * This function is called on each CPU. It disables the watchdog on that CPU. + * + * TCR[WRC] cannot be changed once it has been set to non-zero, but we can + * effectively disable the watchdog by setting its period to the maximum value. + */ +static void __booke_wdt_disable(void *data) +{ + u32 val; + + val = mfspr(SPRN_TCR); + val &= ~(TCR_WIE | WDTP_MASK); + mtspr(SPRN_TCR, val); + + /* clear status to make sure nothing is pending */ + __booke_wdt_ping(NULL); + +} + +static int booke_wdt_start(struct watchdog_device *wdog) +{ + on_each_cpu(__booke_wdt_enable, wdog, 0); + pr_debug("watchdog enabled (timeout = %u sec)\n", wdog->timeout); + + return 0; +} + +static int booke_wdt_stop(struct watchdog_device *wdog) +{ + on_each_cpu(__booke_wdt_disable, NULL, 0); + pr_debug("watchdog disabled\n"); + + return 0; +} + +static int booke_wdt_set_timeout(struct watchdog_device *wdt_dev, + unsigned int timeout) +{ + wdt_dev->timeout = timeout; + booke_wdt_set(wdt_dev); + + return 0; +} + +static struct watchdog_info booke_wdt_info __ro_after_init = { + .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING, + .identity = "PowerPC Book-E Watchdog", +}; + +static const struct watchdog_ops booke_wdt_ops = { + .owner = THIS_MODULE, + .start = booke_wdt_start, + .stop = booke_wdt_stop, + .ping = booke_wdt_ping, + .set_timeout = booke_wdt_set_timeout, +}; + +static struct watchdog_device booke_wdt_dev = { + .info = &booke_wdt_info, + .ops = &booke_wdt_ops, + .min_timeout = 1, +}; + +static void __exit booke_wdt_exit(void) +{ + watchdog_unregister_device(&booke_wdt_dev); +} + +static int __init booke_wdt_init(void) +{ + int ret = 0; + bool nowayout = WATCHDOG_NOWAYOUT; + + pr_info("powerpc book-e watchdog driver loaded\n"); + booke_wdt_info.firmware_version = cur_cpu_spec->pvr_value; + booke_wdt_set_timeout(&booke_wdt_dev, + period_to_sec(booke_wdt_period)); + watchdog_set_nowayout(&booke_wdt_dev, nowayout); + booke_wdt_dev.max_timeout = MAX_WDT_TIMEOUT; + if (booke_wdt_enabled) + booke_wdt_start(&booke_wdt_dev); + + ret = watchdog_register_device(&booke_wdt_dev); + + return ret; +} + +module_init(booke_wdt_init); +module_exit(booke_wdt_exit); + +MODULE_ALIAS("booke_wdt"); +MODULE_DESCRIPTION("PowerPC Book-E watchdog driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/watchdog/cadence_wdt.c b/drivers/watchdog/cadence_wdt.c new file mode 100644 index 000000000..c3924356d --- /dev/null +++ b/drivers/watchdog/cadence_wdt.c @@ -0,0 +1,478 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Cadence WDT driver - Used by Xilinx Zynq + * + * Copyright (C) 2010 - 2014 Xilinx, Inc. + * + */ + +#include <linux/clk.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/irq.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/watchdog.h> + +#define CDNS_WDT_DEFAULT_TIMEOUT 10 +/* Supports 1 - 516 sec */ +#define CDNS_WDT_MIN_TIMEOUT 1 +#define CDNS_WDT_MAX_TIMEOUT 516 + +/* Restart key */ +#define CDNS_WDT_RESTART_KEY 0x00001999 + +/* Counter register access key */ +#define CDNS_WDT_REGISTER_ACCESS_KEY 0x00920000 + +/* Counter value divisor */ +#define CDNS_WDT_COUNTER_VALUE_DIVISOR 0x1000 + +/* Clock prescaler value and selection */ +#define CDNS_WDT_PRESCALE_64 64 +#define CDNS_WDT_PRESCALE_512 512 +#define CDNS_WDT_PRESCALE_4096 4096 +#define CDNS_WDT_PRESCALE_SELECT_64 1 +#define CDNS_WDT_PRESCALE_SELECT_512 2 +#define CDNS_WDT_PRESCALE_SELECT_4096 3 + +/* Input clock frequency */ +#define CDNS_WDT_CLK_10MHZ 10000000 +#define CDNS_WDT_CLK_75MHZ 75000000 + +/* Counter maximum value */ +#define CDNS_WDT_COUNTER_MAX 0xFFF + +static int wdt_timeout; +static int nowayout = WATCHDOG_NOWAYOUT; + +module_param(wdt_timeout, int, 0644); +MODULE_PARM_DESC(wdt_timeout, + "Watchdog time in seconds. (default=" + __MODULE_STRING(CDNS_WDT_DEFAULT_TIMEOUT) ")"); + +module_param(nowayout, int, 0644); +MODULE_PARM_DESC(nowayout, + "Watchdog cannot be stopped once started (default=" + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); + +/** + * struct cdns_wdt - Watchdog device structure + * @regs: baseaddress of device + * @rst: reset flag + * @clk: struct clk * of a clock source + * @prescaler: for saving prescaler value + * @ctrl_clksel: counter clock prescaler selection + * @io_lock: spinlock for IO register access + * @cdns_wdt_device: watchdog device structure + * + * Structure containing parameters specific to cadence watchdog. + */ +struct cdns_wdt { + void __iomem *regs; + bool rst; + struct clk *clk; + u32 prescaler; + u32 ctrl_clksel; + spinlock_t io_lock; + struct watchdog_device cdns_wdt_device; +}; + +/* Write access to Registers */ +static inline void cdns_wdt_writereg(struct cdns_wdt *wdt, u32 offset, u32 val) +{ + writel_relaxed(val, wdt->regs + offset); +} + +/*************************Register Map**************************************/ + +/* Register Offsets for the WDT */ +#define CDNS_WDT_ZMR_OFFSET 0x0 /* Zero Mode Register */ +#define CDNS_WDT_CCR_OFFSET 0x4 /* Counter Control Register */ +#define CDNS_WDT_RESTART_OFFSET 0x8 /* Restart Register */ +#define CDNS_WDT_SR_OFFSET 0xC /* Status Register */ + +/* + * Zero Mode Register - This register controls how the time out is indicated + * and also contains the access code to allow writes to the register (0xABC). + */ +#define CDNS_WDT_ZMR_WDEN_MASK 0x00000001 /* Enable the WDT */ +#define CDNS_WDT_ZMR_RSTEN_MASK 0x00000002 /* Enable the reset output */ +#define CDNS_WDT_ZMR_IRQEN_MASK 0x00000004 /* Enable IRQ output */ +#define CDNS_WDT_ZMR_RSTLEN_16 0x00000030 /* Reset pulse of 16 pclk cycles */ +#define CDNS_WDT_ZMR_ZKEY_VAL 0x00ABC000 /* Access key, 0xABC << 12 */ +/* + * Counter Control register - This register controls how fast the timer runs + * and the reset value and also contains the access code to allow writes to + * the register. + */ +#define CDNS_WDT_CCR_CRV_MASK 0x00003FFC /* Counter reset value */ + +/** + * cdns_wdt_stop - Stop the watchdog. + * + * @wdd: watchdog device + * + * Read the contents of the ZMR register, clear the WDEN bit + * in the register and set the access key for successful write. + * + * Return: always 0 + */ +static int cdns_wdt_stop(struct watchdog_device *wdd) +{ + struct cdns_wdt *wdt = watchdog_get_drvdata(wdd); + + spin_lock(&wdt->io_lock); + cdns_wdt_writereg(wdt, CDNS_WDT_ZMR_OFFSET, + CDNS_WDT_ZMR_ZKEY_VAL & (~CDNS_WDT_ZMR_WDEN_MASK)); + spin_unlock(&wdt->io_lock); + + return 0; +} + +/** + * cdns_wdt_reload - Reload the watchdog timer (i.e. pat the watchdog). + * + * @wdd: watchdog device + * + * Write the restart key value (0x00001999) to the restart register. + * + * Return: always 0 + */ +static int cdns_wdt_reload(struct watchdog_device *wdd) +{ + struct cdns_wdt *wdt = watchdog_get_drvdata(wdd); + + spin_lock(&wdt->io_lock); + cdns_wdt_writereg(wdt, CDNS_WDT_RESTART_OFFSET, + CDNS_WDT_RESTART_KEY); + spin_unlock(&wdt->io_lock); + + return 0; +} + +/** + * cdns_wdt_start - Enable and start the watchdog. + * + * @wdd: watchdog device + * + * The counter value is calculated according to the formula: + * calculated count = (timeout * clock) / prescaler + 1. + * The calculated count is divided by 0x1000 to obtain the field value + * to write to counter control register. + * Clears the contents of prescaler and counter reset value. Sets the + * prescaler to 4096 and the calculated count and access key + * to write to CCR Register. + * Sets the WDT (WDEN bit) and either the Reset signal(RSTEN bit) + * or Interrupt signal(IRQEN) with a specified cycles and the access + * key to write to ZMR Register. + * + * Return: always 0 + */ +static int cdns_wdt_start(struct watchdog_device *wdd) +{ + struct cdns_wdt *wdt = watchdog_get_drvdata(wdd); + unsigned int data = 0; + unsigned short count; + unsigned long clock_f = clk_get_rate(wdt->clk); + + /* + * Counter value divisor to obtain the value of + * counter reset to be written to control register. + */ + count = (wdd->timeout * (clock_f / wdt->prescaler)) / + CDNS_WDT_COUNTER_VALUE_DIVISOR + 1; + + if (count > CDNS_WDT_COUNTER_MAX) + count = CDNS_WDT_COUNTER_MAX; + + spin_lock(&wdt->io_lock); + cdns_wdt_writereg(wdt, CDNS_WDT_ZMR_OFFSET, + CDNS_WDT_ZMR_ZKEY_VAL); + + count = (count << 2) & CDNS_WDT_CCR_CRV_MASK; + + /* Write counter access key first to be able write to register */ + data = count | CDNS_WDT_REGISTER_ACCESS_KEY | wdt->ctrl_clksel; + cdns_wdt_writereg(wdt, CDNS_WDT_CCR_OFFSET, data); + data = CDNS_WDT_ZMR_WDEN_MASK | CDNS_WDT_ZMR_RSTLEN_16 | + CDNS_WDT_ZMR_ZKEY_VAL; + + /* Reset on timeout if specified in device tree. */ + if (wdt->rst) { + data |= CDNS_WDT_ZMR_RSTEN_MASK; + data &= ~CDNS_WDT_ZMR_IRQEN_MASK; + } else { + data &= ~CDNS_WDT_ZMR_RSTEN_MASK; + data |= CDNS_WDT_ZMR_IRQEN_MASK; + } + cdns_wdt_writereg(wdt, CDNS_WDT_ZMR_OFFSET, data); + cdns_wdt_writereg(wdt, CDNS_WDT_RESTART_OFFSET, + CDNS_WDT_RESTART_KEY); + spin_unlock(&wdt->io_lock); + + return 0; +} + +/** + * cdns_wdt_settimeout - Set a new timeout value for the watchdog device. + * + * @wdd: watchdog device + * @new_time: new timeout value that needs to be set + * Return: 0 on success + * + * Update the watchdog_device timeout with new value which is used when + * cdns_wdt_start is called. + */ +static int cdns_wdt_settimeout(struct watchdog_device *wdd, + unsigned int new_time) +{ + wdd->timeout = new_time; + + return cdns_wdt_start(wdd); +} + +/** + * cdns_wdt_irq_handler - Notifies of watchdog timeout. + * + * @irq: interrupt number + * @dev_id: pointer to a platform device structure + * Return: IRQ_HANDLED + * + * The handler is invoked when the watchdog times out and a + * reset on timeout has not been enabled. + */ +static irqreturn_t cdns_wdt_irq_handler(int irq, void *dev_id) +{ + struct platform_device *pdev = dev_id; + + dev_info(&pdev->dev, + "Watchdog timed out. Internal reset not enabled\n"); + + return IRQ_HANDLED; +} + +/* + * Info structure used to indicate the features supported by the device + * to the upper layers. This is defined in watchdog.h header file. + */ +static const struct watchdog_info cdns_wdt_info = { + .identity = "cdns_wdt watchdog", + .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | + WDIOF_MAGICCLOSE, +}; + +/* Watchdog Core Ops */ +static const struct watchdog_ops cdns_wdt_ops = { + .owner = THIS_MODULE, + .start = cdns_wdt_start, + .stop = cdns_wdt_stop, + .ping = cdns_wdt_reload, + .set_timeout = cdns_wdt_settimeout, +}; + +/************************Platform Operations*****************************/ +/** + * cdns_wdt_probe - Probe call for the device. + * + * @pdev: handle to the platform device structure. + * Return: 0 on success, negative error otherwise. + * + * It does all the memory allocation and registration for the device. + */ +static int cdns_wdt_probe(struct platform_device *pdev) +{ + struct resource *res; + int ret, irq; + unsigned long clock_f; + struct cdns_wdt *wdt; + struct watchdog_device *cdns_wdt_device; + + wdt = devm_kzalloc(&pdev->dev, sizeof(*wdt), GFP_KERNEL); + if (!wdt) + return -ENOMEM; + + cdns_wdt_device = &wdt->cdns_wdt_device; + cdns_wdt_device->info = &cdns_wdt_info; + cdns_wdt_device->ops = &cdns_wdt_ops; + cdns_wdt_device->timeout = CDNS_WDT_DEFAULT_TIMEOUT; + cdns_wdt_device->min_timeout = CDNS_WDT_MIN_TIMEOUT; + cdns_wdt_device->max_timeout = CDNS_WDT_MAX_TIMEOUT; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + wdt->regs = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(wdt->regs)) + return PTR_ERR(wdt->regs); + + /* Register the interrupt */ + wdt->rst = of_property_read_bool(pdev->dev.of_node, "reset-on-timeout"); + irq = platform_get_irq(pdev, 0); + if (!wdt->rst && irq >= 0) { + ret = devm_request_irq(&pdev->dev, irq, cdns_wdt_irq_handler, 0, + pdev->name, pdev); + if (ret) { + dev_err(&pdev->dev, + "cannot register interrupt handler err=%d\n", + ret); + return ret; + } + } + + /* Initialize the members of cdns_wdt structure */ + cdns_wdt_device->parent = &pdev->dev; + + ret = watchdog_init_timeout(cdns_wdt_device, wdt_timeout, &pdev->dev); + if (ret) { + dev_err(&pdev->dev, "unable to set timeout value\n"); + return ret; + } + + watchdog_set_nowayout(cdns_wdt_device, nowayout); + watchdog_stop_on_reboot(cdns_wdt_device); + watchdog_set_drvdata(cdns_wdt_device, wdt); + + wdt->clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(wdt->clk)) { + dev_err(&pdev->dev, "input clock not found\n"); + ret = PTR_ERR(wdt->clk); + return ret; + } + + ret = clk_prepare_enable(wdt->clk); + if (ret) { + dev_err(&pdev->dev, "unable to enable clock\n"); + return ret; + } + + clock_f = clk_get_rate(wdt->clk); + if (clock_f <= CDNS_WDT_CLK_75MHZ) { + wdt->prescaler = CDNS_WDT_PRESCALE_512; + wdt->ctrl_clksel = CDNS_WDT_PRESCALE_SELECT_512; + } else { + wdt->prescaler = CDNS_WDT_PRESCALE_4096; + wdt->ctrl_clksel = CDNS_WDT_PRESCALE_SELECT_4096; + } + + spin_lock_init(&wdt->io_lock); + + ret = watchdog_register_device(cdns_wdt_device); + if (ret) { + dev_err(&pdev->dev, "Failed to register wdt device\n"); + goto err_clk_disable; + } + platform_set_drvdata(pdev, wdt); + + dev_info(&pdev->dev, "Xilinx Watchdog Timer at %p with timeout %ds%s\n", + wdt->regs, cdns_wdt_device->timeout, + nowayout ? ", nowayout" : ""); + + return 0; + +err_clk_disable: + clk_disable_unprepare(wdt->clk); + + return ret; +} + +/** + * cdns_wdt_remove - Probe call for the device. + * + * @pdev: handle to the platform device structure. + * Return: 0 on success, otherwise negative error. + * + * Unregister the device after releasing the resources. + */ +static int cdns_wdt_remove(struct platform_device *pdev) +{ + struct cdns_wdt *wdt = platform_get_drvdata(pdev); + + cdns_wdt_stop(&wdt->cdns_wdt_device); + watchdog_unregister_device(&wdt->cdns_wdt_device); + clk_disable_unprepare(wdt->clk); + + return 0; +} + +/** + * cdns_wdt_shutdown - Stop the device. + * + * @pdev: handle to the platform structure. + * + */ +static void cdns_wdt_shutdown(struct platform_device *pdev) +{ + struct cdns_wdt *wdt = platform_get_drvdata(pdev); + + cdns_wdt_stop(&wdt->cdns_wdt_device); + clk_disable_unprepare(wdt->clk); +} + +/** + * cdns_wdt_suspend - Stop the device. + * + * @dev: handle to the device structure. + * Return: 0 always. + */ +static int __maybe_unused cdns_wdt_suspend(struct device *dev) +{ + struct cdns_wdt *wdt = dev_get_drvdata(dev); + + if (watchdog_active(&wdt->cdns_wdt_device)) { + cdns_wdt_stop(&wdt->cdns_wdt_device); + clk_disable_unprepare(wdt->clk); + } + + return 0; +} + +/** + * cdns_wdt_resume - Resume the device. + * + * @dev: handle to the device structure. + * Return: 0 on success, errno otherwise. + */ +static int __maybe_unused cdns_wdt_resume(struct device *dev) +{ + int ret; + struct cdns_wdt *wdt = dev_get_drvdata(dev); + + if (watchdog_active(&wdt->cdns_wdt_device)) { + ret = clk_prepare_enable(wdt->clk); + if (ret) { + dev_err(dev, "unable to enable clock\n"); + return ret; + } + cdns_wdt_start(&wdt->cdns_wdt_device); + } + + return 0; +} + +static SIMPLE_DEV_PM_OPS(cdns_wdt_pm_ops, cdns_wdt_suspend, cdns_wdt_resume); + +static const struct of_device_id cdns_wdt_of_match[] = { + { .compatible = "cdns,wdt-r1p2", }, + { /* end of table */ } +}; +MODULE_DEVICE_TABLE(of, cdns_wdt_of_match); + +/* Driver Structure */ +static struct platform_driver cdns_wdt_driver = { + .probe = cdns_wdt_probe, + .remove = cdns_wdt_remove, + .shutdown = cdns_wdt_shutdown, + .driver = { + .name = "cdns-wdt", + .of_match_table = cdns_wdt_of_match, + .pm = &cdns_wdt_pm_ops, + }, +}; + +module_platform_driver(cdns_wdt_driver); + +MODULE_AUTHOR("Xilinx, Inc."); +MODULE_DESCRIPTION("Watchdog driver for Cadence WDT"); +MODULE_LICENSE("GPL"); diff --git a/drivers/watchdog/coh901327_wdt.c b/drivers/watchdog/coh901327_wdt.c new file mode 100644 index 000000000..f29d1edc5 --- /dev/null +++ b/drivers/watchdog/coh901327_wdt.c @@ -0,0 +1,426 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * coh901327_wdt.c + * + * Copyright (C) 2008-2009 ST-Ericsson AB + * Watchdog driver for the ST-Ericsson AB COH 901 327 IP core + * Author: Linus Walleij <linus.walleij@stericsson.com> + */ +#include <linux/module.h> +#include <linux/mod_devicetable.h> +#include <linux/types.h> +#include <linux/watchdog.h> +#include <linux/interrupt.h> +#include <linux/pm.h> +#include <linux/platform_device.h> +#include <linux/io.h> +#include <linux/bitops.h> +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/err.h> + +#define DRV_NAME "WDOG COH 901 327" + +/* + * COH 901 327 register definitions + */ + +/* WDOG_FEED Register 32bit (-/W) */ +#define U300_WDOG_FR 0x00 +#define U300_WDOG_FR_FEED_RESTART_TIMER 0xFEEDU +/* WDOG_TIMEOUT Register 32bit (R/W) */ +#define U300_WDOG_TR 0x04 +#define U300_WDOG_TR_TIMEOUT_MASK 0x7FFFU +/* WDOG_DISABLE1 Register 32bit (-/W) */ +#define U300_WDOG_D1R 0x08 +#define U300_WDOG_D1R_DISABLE1_DISABLE_TIMER 0x2BADU +/* WDOG_DISABLE2 Register 32bit (R/W) */ +#define U300_WDOG_D2R 0x0C +#define U300_WDOG_D2R_DISABLE2_DISABLE_TIMER 0xCAFEU +#define U300_WDOG_D2R_DISABLE_STATUS_DISABLED 0xDABEU +#define U300_WDOG_D2R_DISABLE_STATUS_ENABLED 0x0000U +/* WDOG_STATUS Register 32bit (R/W) */ +#define U300_WDOG_SR 0x10 +#define U300_WDOG_SR_STATUS_TIMED_OUT 0xCFE8U +#define U300_WDOG_SR_STATUS_NORMAL 0x0000U +#define U300_WDOG_SR_RESET_STATUS_RESET 0xE8B4U +/* WDOG_COUNT Register 32bit (R/-) */ +#define U300_WDOG_CR 0x14 +#define U300_WDOG_CR_VALID_IND 0x8000U +#define U300_WDOG_CR_VALID_STABLE 0x0000U +#define U300_WDOG_CR_COUNT_VALUE_MASK 0x7FFFU +/* WDOG_JTAGOVR Register 32bit (R/W) */ +#define U300_WDOG_JOR 0x18 +#define U300_WDOG_JOR_JTAG_MODE_IND 0x0002U +#define U300_WDOG_JOR_JTAG_WATCHDOG_ENABLE 0x0001U +/* WDOG_RESTART Register 32bit (-/W) */ +#define U300_WDOG_RR 0x1C +#define U300_WDOG_RR_RESTART_VALUE_RESUME 0xACEDU +/* WDOG_IRQ_EVENT Register 32bit (R/W) */ +#define U300_WDOG_IER 0x20 +#define U300_WDOG_IER_WILL_BARK_IRQ_EVENT_IND 0x0001U +#define U300_WDOG_IER_WILL_BARK_IRQ_ACK_ENABLE 0x0001U +/* WDOG_IRQ_MASK Register 32bit (R/W) */ +#define U300_WDOG_IMR 0x24 +#define U300_WDOG_IMR_WILL_BARK_IRQ_ENABLE 0x0001U +/* WDOG_IRQ_FORCE Register 32bit (R/W) */ +#define U300_WDOG_IFR 0x28 +#define U300_WDOG_IFR_WILL_BARK_IRQ_FORCE_ENABLE 0x0001U + +/* Default timeout in seconds = 1 minute */ +#define U300_WDOG_DEFAULT_TIMEOUT 60 + +static unsigned int margin; +static int irq; +static void __iomem *virtbase; +static struct device *parent; + +static struct clk *clk; + +/* + * Enabling and disabling functions. + */ +static void coh901327_enable(u16 timeout) +{ + u16 val; + unsigned long freq; + unsigned long delay_ns; + + /* Restart timer if it is disabled */ + val = readw(virtbase + U300_WDOG_D2R); + if (val == U300_WDOG_D2R_DISABLE_STATUS_DISABLED) + writew(U300_WDOG_RR_RESTART_VALUE_RESUME, + virtbase + U300_WDOG_RR); + /* Acknowledge any pending interrupt so it doesn't just fire off */ + writew(U300_WDOG_IER_WILL_BARK_IRQ_ACK_ENABLE, + virtbase + U300_WDOG_IER); + /* + * The interrupt is cleared in the 32 kHz clock domain. + * Wait 3 32 kHz cycles for it to take effect + */ + freq = clk_get_rate(clk); + delay_ns = DIV_ROUND_UP(1000000000, freq); /* Freq to ns and round up */ + delay_ns = 3 * delay_ns; /* Wait 3 cycles */ + ndelay(delay_ns); + /* Enable the watchdog interrupt */ + writew(U300_WDOG_IMR_WILL_BARK_IRQ_ENABLE, virtbase + U300_WDOG_IMR); + /* Activate the watchdog timer */ + writew(timeout, virtbase + U300_WDOG_TR); + /* Start the watchdog timer */ + writew(U300_WDOG_FR_FEED_RESTART_TIMER, virtbase + U300_WDOG_FR); + /* + * Extra read so that this change propagate in the watchdog. + */ + (void) readw(virtbase + U300_WDOG_CR); + val = readw(virtbase + U300_WDOG_D2R); + if (val != U300_WDOG_D2R_DISABLE_STATUS_ENABLED) + dev_err(parent, + "%s(): watchdog not enabled! D2R value %04x\n", + __func__, val); +} + +static void coh901327_disable(void) +{ + u16 val; + + /* Disable the watchdog interrupt if it is active */ + writew(0x0000U, virtbase + U300_WDOG_IMR); + /* If the watchdog is currently enabled, attempt to disable it */ + val = readw(virtbase + U300_WDOG_D2R); + if (val != U300_WDOG_D2R_DISABLE_STATUS_DISABLED) { + writew(U300_WDOG_D1R_DISABLE1_DISABLE_TIMER, + virtbase + U300_WDOG_D1R); + writew(U300_WDOG_D2R_DISABLE2_DISABLE_TIMER, + virtbase + U300_WDOG_D2R); + /* Write this twice (else problems occur) */ + writew(U300_WDOG_D2R_DISABLE2_DISABLE_TIMER, + virtbase + U300_WDOG_D2R); + } + val = readw(virtbase + U300_WDOG_D2R); + if (val != U300_WDOG_D2R_DISABLE_STATUS_DISABLED) + dev_err(parent, + "%s(): watchdog not disabled! D2R value %04x\n", + __func__, val); +} + +static int coh901327_start(struct watchdog_device *wdt_dev) +{ + coh901327_enable(wdt_dev->timeout * 100); + return 0; +} + +static int coh901327_stop(struct watchdog_device *wdt_dev) +{ + coh901327_disable(); + return 0; +} + +static int coh901327_ping(struct watchdog_device *wdd) +{ + /* Feed the watchdog */ + writew(U300_WDOG_FR_FEED_RESTART_TIMER, + virtbase + U300_WDOG_FR); + return 0; +} + +static int coh901327_settimeout(struct watchdog_device *wdt_dev, + unsigned int time) +{ + wdt_dev->timeout = time; + /* Set new timeout value */ + writew(time * 100, virtbase + U300_WDOG_TR); + /* Feed the dog */ + writew(U300_WDOG_FR_FEED_RESTART_TIMER, + virtbase + U300_WDOG_FR); + return 0; +} + +static unsigned int coh901327_gettimeleft(struct watchdog_device *wdt_dev) +{ + u16 val; + + /* Read repeatedly until the value is stable! */ + val = readw(virtbase + U300_WDOG_CR); + while (val & U300_WDOG_CR_VALID_IND) + val = readw(virtbase + U300_WDOG_CR); + val &= U300_WDOG_CR_COUNT_VALUE_MASK; + if (val != 0) + val /= 100; + + return val; +} + +/* + * This interrupt occurs 10 ms before the watchdog WILL bark. + */ +static irqreturn_t coh901327_interrupt(int irq, void *data) +{ + u16 val; + + /* + * Ack IRQ? If this occurs we're FUBAR anyway, so + * just acknowledge, disable the interrupt and await the imminent end. + * If you at some point need a host of callbacks to be called + * when the system is about to watchdog-reset, add them here! + * + * NOTE: on future versions of this IP-block, it will be possible + * to prevent a watchdog reset by feeding the watchdog at this + * point. + */ + val = readw(virtbase + U300_WDOG_IER); + if (val == U300_WDOG_IER_WILL_BARK_IRQ_EVENT_IND) + writew(U300_WDOG_IER_WILL_BARK_IRQ_ACK_ENABLE, + virtbase + U300_WDOG_IER); + writew(0x0000U, virtbase + U300_WDOG_IMR); + dev_crit(parent, "watchdog is barking!\n"); + return IRQ_HANDLED; +} + +static const struct watchdog_info coh901327_ident = { + .options = WDIOF_CARDRESET | WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING, + .identity = DRV_NAME, +}; + +static const struct watchdog_ops coh901327_ops = { + .owner = THIS_MODULE, + .start = coh901327_start, + .stop = coh901327_stop, + .ping = coh901327_ping, + .set_timeout = coh901327_settimeout, + .get_timeleft = coh901327_gettimeleft, +}; + +static struct watchdog_device coh901327_wdt = { + .info = &coh901327_ident, + .ops = &coh901327_ops, + /* + * Max timeout is 327 since the 10ms + * timeout register is max + * 0x7FFF = 327670ms ~= 327s. + */ + .min_timeout = 1, + .max_timeout = 327, + .timeout = U300_WDOG_DEFAULT_TIMEOUT, +}; + +static int __exit coh901327_remove(struct platform_device *pdev) +{ + watchdog_unregister_device(&coh901327_wdt); + coh901327_disable(); + free_irq(irq, pdev); + clk_disable_unprepare(clk); + clk_put(clk); + return 0; +} + +static int __init coh901327_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + int ret; + u16 val; + struct resource *res; + + parent = dev; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + virtbase = devm_ioremap_resource(dev, res); + if (IS_ERR(virtbase)) + return PTR_ERR(virtbase); + + clk = clk_get(dev, NULL); + if (IS_ERR(clk)) { + ret = PTR_ERR(clk); + dev_err(dev, "could not get clock\n"); + return ret; + } + ret = clk_prepare_enable(clk); + if (ret) { + dev_err(dev, "could not prepare and enable clock\n"); + goto out_no_clk_enable; + } + + val = readw(virtbase + U300_WDOG_SR); + switch (val) { + case U300_WDOG_SR_STATUS_TIMED_OUT: + dev_info(dev, "watchdog timed out since last chip reset!\n"); + coh901327_wdt.bootstatus |= WDIOF_CARDRESET; + /* Status will be cleared below */ + break; + case U300_WDOG_SR_STATUS_NORMAL: + dev_info(dev, "in normal status, no timeouts have occurred.\n"); + break; + default: + dev_info(dev, "contains an illegal status code (%08x)\n", val); + break; + } + + val = readw(virtbase + U300_WDOG_D2R); + switch (val) { + case U300_WDOG_D2R_DISABLE_STATUS_DISABLED: + dev_info(dev, "currently disabled.\n"); + break; + case U300_WDOG_D2R_DISABLE_STATUS_ENABLED: + dev_info(dev, "currently enabled! (disabling it now)\n"); + coh901327_disable(); + break; + default: + dev_err(dev, "contains an illegal enable/disable code (%08x)\n", + val); + break; + } + + /* Reset the watchdog */ + writew(U300_WDOG_SR_RESET_STATUS_RESET, virtbase + U300_WDOG_SR); + + irq = platform_get_irq(pdev, 0); + if (request_irq(irq, coh901327_interrupt, 0, + DRV_NAME " Bark", pdev)) { + ret = -EIO; + goto out_no_irq; + } + + watchdog_init_timeout(&coh901327_wdt, margin, dev); + + coh901327_wdt.parent = dev; + ret = watchdog_register_device(&coh901327_wdt); + if (ret) + goto out_no_wdog; + + dev_info(dev, "initialized. (timeout=%d sec)\n", + coh901327_wdt.timeout); + return 0; + +out_no_wdog: + free_irq(irq, pdev); +out_no_irq: + clk_disable_unprepare(clk); +out_no_clk_enable: + clk_put(clk); + return ret; +} + +#ifdef CONFIG_PM + +static u16 wdogenablestore; +static u16 irqmaskstore; + +static int coh901327_suspend(struct platform_device *pdev, pm_message_t state) +{ + irqmaskstore = readw(virtbase + U300_WDOG_IMR) & 0x0001U; + wdogenablestore = readw(virtbase + U300_WDOG_D2R); + /* If watchdog is on, disable it here and now */ + if (wdogenablestore == U300_WDOG_D2R_DISABLE_STATUS_ENABLED) + coh901327_disable(); + return 0; +} + +static int coh901327_resume(struct platform_device *pdev) +{ + /* Restore the watchdog interrupt */ + writew(irqmaskstore, virtbase + U300_WDOG_IMR); + if (wdogenablestore == U300_WDOG_D2R_DISABLE_STATUS_ENABLED) { + /* Restart the watchdog timer */ + writew(U300_WDOG_RR_RESTART_VALUE_RESUME, + virtbase + U300_WDOG_RR); + writew(U300_WDOG_FR_FEED_RESTART_TIMER, + virtbase + U300_WDOG_FR); + } + return 0; +} +#else +#define coh901327_suspend NULL +#define coh901327_resume NULL +#endif + +/* + * Mistreating the watchdog is the only way to perform a software reset of the + * system on EMP platforms. So we implement this and export a symbol for it. + */ +void coh901327_watchdog_reset(void) +{ + /* Enable even if on JTAG too */ + writew(U300_WDOG_JOR_JTAG_WATCHDOG_ENABLE, + virtbase + U300_WDOG_JOR); + /* + * Timeout = 5s, we have to wait for the watchdog reset to + * actually take place: the watchdog will be reloaded with the + * default value immediately, so we HAVE to reboot and get back + * into the kernel in 30s, or the device will reboot again! + * The boot loader will typically deactivate the watchdog, so we + * need time enough for the boot loader to get to the point of + * deactivating the watchdog before it is shut down by it. + * + * NOTE: on future versions of the watchdog, this restriction is + * gone: the watchdog will be reloaded with a default value (1 min) + * instead of last value, and you can conveniently set the watchdog + * timeout to 10ms (value = 1) without any problems. + */ + coh901327_enable(500); + /* Return and await doom */ +} + +static const struct of_device_id coh901327_dt_match[] = { + { .compatible = "stericsson,coh901327" }, + {}, +}; + +static struct platform_driver coh901327_driver = { + .driver = { + .name = "coh901327_wdog", + .of_match_table = coh901327_dt_match, + }, + .remove = __exit_p(coh901327_remove), + .suspend = coh901327_suspend, + .resume = coh901327_resume, +}; + +module_platform_driver_probe(coh901327_driver, coh901327_probe); + +MODULE_AUTHOR("Linus Walleij <linus.walleij@stericsson.com>"); +MODULE_DESCRIPTION("COH 901 327 Watchdog"); + +module_param(margin, uint, 0); +MODULE_PARM_DESC(margin, "Watchdog margin in seconds (default 60s)"); + +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:coh901327-watchdog"); diff --git a/drivers/watchdog/cpu5wdt.c b/drivers/watchdog/cpu5wdt.c new file mode 100644 index 000000000..6cfb102c3 --- /dev/null +++ b/drivers/watchdog/cpu5wdt.c @@ -0,0 +1,299 @@ +/* + * sma cpu5 watchdog driver + * + * Copyright (C) 2003 Heiko Ronsdorf <hero@ihg.uni-duisburg.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/types.h> +#include <linux/errno.h> +#include <linux/miscdevice.h> +#include <linux/fs.h> +#include <linux/ioport.h> +#include <linux/timer.h> +#include <linux/completion.h> +#include <linux/jiffies.h> +#include <linux/io.h> +#include <linux/uaccess.h> +#include <linux/watchdog.h> + +/* adjustable parameters */ + +static int verbose; +static int port = 0x91; +static int ticks = 10000; +static DEFINE_SPINLOCK(cpu5wdt_lock); + +#define PFX "cpu5wdt: " + +#define CPU5WDT_EXTENT 0x0A + +#define CPU5WDT_STATUS_REG 0x00 +#define CPU5WDT_TIME_A_REG 0x02 +#define CPU5WDT_TIME_B_REG 0x03 +#define CPU5WDT_MODE_REG 0x04 +#define CPU5WDT_TRIGGER_REG 0x07 +#define CPU5WDT_ENABLE_REG 0x08 +#define CPU5WDT_RESET_REG 0x09 + +#define CPU5WDT_INTERVAL (HZ/10+1) + +/* some device data */ + +static struct { + struct completion stop; + int running; + struct timer_list timer; + int queue; + int default_ticks; + unsigned long inuse; +} cpu5wdt_device; + +/* generic helper functions */ + +static void cpu5wdt_trigger(struct timer_list *unused) +{ + if (verbose > 2) + pr_debug("trigger at %i ticks\n", ticks); + + if (cpu5wdt_device.running) + ticks--; + + spin_lock(&cpu5wdt_lock); + /* keep watchdog alive */ + outb(1, port + CPU5WDT_TRIGGER_REG); + + /* requeue?? */ + if (cpu5wdt_device.queue && ticks) + mod_timer(&cpu5wdt_device.timer, jiffies + CPU5WDT_INTERVAL); + else { + /* ticks doesn't matter anyway */ + complete(&cpu5wdt_device.stop); + } + spin_unlock(&cpu5wdt_lock); + +} + +static void cpu5wdt_reset(void) +{ + ticks = cpu5wdt_device.default_ticks; + + if (verbose) + pr_debug("reset (%i ticks)\n", (int) ticks); + +} + +static void cpu5wdt_start(void) +{ + unsigned long flags; + + spin_lock_irqsave(&cpu5wdt_lock, flags); + if (!cpu5wdt_device.queue) { + cpu5wdt_device.queue = 1; + outb(0, port + CPU5WDT_TIME_A_REG); + outb(0, port + CPU5WDT_TIME_B_REG); + outb(1, port + CPU5WDT_MODE_REG); + outb(0, port + CPU5WDT_RESET_REG); + outb(0, port + CPU5WDT_ENABLE_REG); + mod_timer(&cpu5wdt_device.timer, jiffies + CPU5WDT_INTERVAL); + } + /* if process dies, counter is not decremented */ + cpu5wdt_device.running++; + spin_unlock_irqrestore(&cpu5wdt_lock, flags); +} + +static int cpu5wdt_stop(void) +{ + unsigned long flags; + + spin_lock_irqsave(&cpu5wdt_lock, flags); + if (cpu5wdt_device.running) + cpu5wdt_device.running = 0; + ticks = cpu5wdt_device.default_ticks; + spin_unlock_irqrestore(&cpu5wdt_lock, flags); + if (verbose) + pr_crit("stop not possible\n"); + return -EIO; +} + +/* filesystem operations */ + +static int cpu5wdt_open(struct inode *inode, struct file *file) +{ + if (test_and_set_bit(0, &cpu5wdt_device.inuse)) + return -EBUSY; + return nonseekable_open(inode, file); +} + +static int cpu5wdt_release(struct inode *inode, struct file *file) +{ + clear_bit(0, &cpu5wdt_device.inuse); + return 0; +} + +static long cpu5wdt_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) +{ + void __user *argp = (void __user *)arg; + int __user *p = argp; + unsigned int value; + static const struct watchdog_info ident = { + .options = WDIOF_CARDRESET, + .identity = "CPU5 WDT", + }; + + switch (cmd) { + case WDIOC_GETSUPPORT: + if (copy_to_user(argp, &ident, sizeof(ident))) + return -EFAULT; + break; + case WDIOC_GETSTATUS: + value = inb(port + CPU5WDT_STATUS_REG); + value = (value >> 2) & 1; + return put_user(value, p); + case WDIOC_GETBOOTSTATUS: + return put_user(0, p); + case WDIOC_SETOPTIONS: + if (get_user(value, p)) + return -EFAULT; + if (value & WDIOS_ENABLECARD) + cpu5wdt_start(); + if (value & WDIOS_DISABLECARD) + cpu5wdt_stop(); + break; + case WDIOC_KEEPALIVE: + cpu5wdt_reset(); + break; + default: + return -ENOTTY; + } + return 0; +} + +static ssize_t cpu5wdt_write(struct file *file, const char __user *buf, + size_t count, loff_t *ppos) +{ + if (!count) + return -EIO; + cpu5wdt_reset(); + return count; +} + +static const struct file_operations cpu5wdt_fops = { + .owner = THIS_MODULE, + .llseek = no_llseek, + .unlocked_ioctl = cpu5wdt_ioctl, + .open = cpu5wdt_open, + .write = cpu5wdt_write, + .release = cpu5wdt_release, +}; + +static struct miscdevice cpu5wdt_misc = { + .minor = WATCHDOG_MINOR, + .name = "watchdog", + .fops = &cpu5wdt_fops, +}; + +/* init/exit function */ + +static int cpu5wdt_init(void) +{ + unsigned int val; + int err; + + if (verbose) + pr_debug("port=0x%x, verbose=%i\n", port, verbose); + + init_completion(&cpu5wdt_device.stop); + cpu5wdt_device.queue = 0; + timer_setup(&cpu5wdt_device.timer, cpu5wdt_trigger, 0); + cpu5wdt_device.default_ticks = ticks; + + if (!request_region(port, CPU5WDT_EXTENT, PFX)) { + pr_err("request_region failed\n"); + err = -EBUSY; + goto no_port; + } + + /* watchdog reboot? */ + val = inb(port + CPU5WDT_STATUS_REG); + val = (val >> 2) & 1; + if (!val) + pr_info("sorry, was my fault\n"); + + err = misc_register(&cpu5wdt_misc); + if (err < 0) { + pr_err("misc_register failed\n"); + goto no_misc; + } + + + pr_info("init success\n"); + return 0; + +no_misc: + release_region(port, CPU5WDT_EXTENT); +no_port: + return err; +} + +static int cpu5wdt_init_module(void) +{ + return cpu5wdt_init(); +} + +static void cpu5wdt_exit(void) +{ + if (cpu5wdt_device.queue) { + cpu5wdt_device.queue = 0; + wait_for_completion(&cpu5wdt_device.stop); + del_timer(&cpu5wdt_device.timer); + } + + misc_deregister(&cpu5wdt_misc); + + release_region(port, CPU5WDT_EXTENT); + +} + +static void cpu5wdt_exit_module(void) +{ + cpu5wdt_exit(); +} + +/* module entry points */ + +module_init(cpu5wdt_init_module); +module_exit(cpu5wdt_exit_module); + +MODULE_AUTHOR("Heiko Ronsdorf <hero@ihg.uni-duisburg.de>"); +MODULE_DESCRIPTION("sma cpu5 watchdog driver"); +MODULE_SUPPORTED_DEVICE("sma cpu5 watchdog"); +MODULE_LICENSE("GPL"); + +module_param_hw(port, int, ioport, 0); +MODULE_PARM_DESC(port, "base address of watchdog card, default is 0x91"); + +module_param(verbose, int, 0); +MODULE_PARM_DESC(verbose, "be verbose, default is 0 (no)"); + +module_param(ticks, int, 0); +MODULE_PARM_DESC(ticks, "count down ticks, default is 10000"); diff --git a/drivers/watchdog/cpwd.c b/drivers/watchdog/cpwd.c new file mode 100644 index 000000000..aee0b25cf --- /dev/null +++ b/drivers/watchdog/cpwd.c @@ -0,0 +1,677 @@ +/* cpwd.c - driver implementation for hardware watchdog + * timers found on Sun Microsystems CP1400 and CP1500 boards. + * + * This device supports both the generic Linux watchdog + * interface and Solaris-compatible ioctls as best it is + * able. + * + * NOTE: CP1400 systems appear to have a defective intr_mask + * register on the PLD, preventing the disabling of + * timer interrupts. We use a timer to periodically + * reset 'stopped' watchdogs on affected platforms. + * + * Copyright (c) 2000 Eric Brower (ebrower@usa.net) + * Copyright (C) 2008 David S. Miller <davem@davemloft.net> + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/fs.h> +#include <linux/errno.h> +#include <linux/major.h> +#include <linux/miscdevice.h> +#include <linux/interrupt.h> +#include <linux/ioport.h> +#include <linux/timer.h> +#include <linux/slab.h> +#include <linux/mutex.h> +#include <linux/io.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/uaccess.h> + +#include <asm/irq.h> +#include <asm/watchdog.h> + +#define DRIVER_NAME "cpwd" + +#define WD_OBPNAME "watchdog" +#define WD_BADMODEL "SUNW,501-5336" +#define WD_BTIMEOUT (jiffies + (HZ * 1000)) +#define WD_BLIMIT 0xFFFF + +#define WD0_MINOR 212 +#define WD1_MINOR 213 +#define WD2_MINOR 214 + +/* Internal driver definitions. */ +#define WD0_ID 0 +#define WD1_ID 1 +#define WD2_ID 2 +#define WD_NUMDEVS 3 + +#define WD_INTR_OFF 0 +#define WD_INTR_ON 1 + +#define WD_STAT_INIT 0x01 /* Watchdog timer is initialized */ +#define WD_STAT_BSTOP 0x02 /* Watchdog timer is brokenstopped */ +#define WD_STAT_SVCD 0x04 /* Watchdog interrupt occurred */ + +/* Register value definitions + */ +#define WD0_INTR_MASK 0x01 /* Watchdog device interrupt masks */ +#define WD1_INTR_MASK 0x02 +#define WD2_INTR_MASK 0x04 + +#define WD_S_RUNNING 0x01 /* Watchdog device status running */ +#define WD_S_EXPIRED 0x02 /* Watchdog device status expired */ + +struct cpwd { + void __iomem *regs; + spinlock_t lock; + + unsigned int irq; + + unsigned long timeout; + bool enabled; + bool reboot; + bool broken; + bool initialized; + + struct { + struct miscdevice misc; + void __iomem *regs; + u8 intr_mask; + u8 runstatus; + u16 timeout; + } devs[WD_NUMDEVS]; +}; + +static DEFINE_MUTEX(cpwd_mutex); +static struct cpwd *cpwd_device; + +/* Sun uses Altera PLD EPF8820ATC144-4 + * providing three hardware watchdogs: + * + * 1) RIC - sends an interrupt when triggered + * 2) XIR - asserts XIR_B_RESET when triggered, resets CPU + * 3) POR - asserts POR_B_RESET when triggered, resets CPU, backplane, board + * + *** Timer register block definition (struct wd_timer_regblk) + * + * dcntr and limit registers (halfword access): + * ------------------- + * | 15 | ...| 1 | 0 | + * ------------------- + * |- counter val -| + * ------------------- + * dcntr - Current 16-bit downcounter value. + * When downcounter reaches '0' watchdog expires. + * Reading this register resets downcounter with + * 'limit' value. + * limit - 16-bit countdown value in 1/10th second increments. + * Writing this register begins countdown with input value. + * Reading from this register does not affect counter. + * NOTES: After watchdog reset, dcntr and limit contain '1' + * + * status register (byte access): + * --------------------------- + * | 7 | ... | 2 | 1 | 0 | + * --------------+------------ + * |- UNUSED -| EXP | RUN | + * --------------------------- + * status- Bit 0 - Watchdog is running + * Bit 1 - Watchdog has expired + * + *** PLD register block definition (struct wd_pld_regblk) + * + * intr_mask register (byte access): + * --------------------------------- + * | 7 | ... | 3 | 2 | 1 | 0 | + * +-------------+------------------ + * |- UNUSED -| WD3 | WD2 | WD1 | + * --------------------------------- + * WD3 - 1 == Interrupt disabled for watchdog 3 + * WD2 - 1 == Interrupt disabled for watchdog 2 + * WD1 - 1 == Interrupt disabled for watchdog 1 + * + * pld_status register (byte access): + * UNKNOWN, MAGICAL MYSTERY REGISTER + * + */ +#define WD_TIMER_REGSZ 16 +#define WD0_OFF 0 +#define WD1_OFF (WD_TIMER_REGSZ * 1) +#define WD2_OFF (WD_TIMER_REGSZ * 2) +#define PLD_OFF (WD_TIMER_REGSZ * 3) + +#define WD_DCNTR 0x00 +#define WD_LIMIT 0x04 +#define WD_STATUS 0x08 + +#define PLD_IMASK (PLD_OFF + 0x00) +#define PLD_STATUS (PLD_OFF + 0x04) + +static struct timer_list cpwd_timer; + +static int wd0_timeout; +static int wd1_timeout; +static int wd2_timeout; + +module_param(wd0_timeout, int, 0); +MODULE_PARM_DESC(wd0_timeout, "Default watchdog0 timeout in 1/10secs"); +module_param(wd1_timeout, int, 0); +MODULE_PARM_DESC(wd1_timeout, "Default watchdog1 timeout in 1/10secs"); +module_param(wd2_timeout, int, 0); +MODULE_PARM_DESC(wd2_timeout, "Default watchdog2 timeout in 1/10secs"); + +MODULE_AUTHOR("Eric Brower <ebrower@usa.net>"); +MODULE_DESCRIPTION("Hardware watchdog driver for Sun Microsystems CP1400/1500"); +MODULE_LICENSE("GPL"); +MODULE_SUPPORTED_DEVICE("watchdog"); + +static void cpwd_writew(u16 val, void __iomem *addr) +{ + writew(cpu_to_le16(val), addr); +} +static u16 cpwd_readw(void __iomem *addr) +{ + u16 val = readw(addr); + + return le16_to_cpu(val); +} + +static void cpwd_writeb(u8 val, void __iomem *addr) +{ + writeb(val, addr); +} + +static u8 cpwd_readb(void __iomem *addr) +{ + return readb(addr); +} + +/* Enable or disable watchdog interrupts + * Because of the CP1400 defect this should only be + * called during initialzation or by wd_[start|stop]timer() + * + * index - sub-device index, or -1 for 'all' + * enable - non-zero to enable interrupts, zero to disable + */ +static void cpwd_toggleintr(struct cpwd *p, int index, int enable) +{ + unsigned char curregs = cpwd_readb(p->regs + PLD_IMASK); + unsigned char setregs = + (index == -1) ? + (WD0_INTR_MASK | WD1_INTR_MASK | WD2_INTR_MASK) : + (p->devs[index].intr_mask); + + if (enable == WD_INTR_ON) + curregs &= ~setregs; + else + curregs |= setregs; + + cpwd_writeb(curregs, p->regs + PLD_IMASK); +} + +/* Restarts timer with maximum limit value and + * does not unset 'brokenstop' value. + */ +static void cpwd_resetbrokentimer(struct cpwd *p, int index) +{ + cpwd_toggleintr(p, index, WD_INTR_ON); + cpwd_writew(WD_BLIMIT, p->devs[index].regs + WD_LIMIT); +} + +/* Timer method called to reset stopped watchdogs-- + * because of the PLD bug on CP1400, we cannot mask + * interrupts within the PLD so me must continually + * reset the timers ad infinitum. + */ +static void cpwd_brokentimer(struct timer_list *unused) +{ + struct cpwd *p = cpwd_device; + int id, tripped = 0; + + /* kill a running timer instance, in case we + * were called directly instead of by kernel timer + */ + if (timer_pending(&cpwd_timer)) + del_timer(&cpwd_timer); + + for (id = 0; id < WD_NUMDEVS; id++) { + if (p->devs[id].runstatus & WD_STAT_BSTOP) { + ++tripped; + cpwd_resetbrokentimer(p, id); + } + } + + if (tripped) { + /* there is at least one timer brokenstopped-- reschedule */ + cpwd_timer.expires = WD_BTIMEOUT; + add_timer(&cpwd_timer); + } +} + +/* Reset countdown timer with 'limit' value and continue countdown. + * This will not start a stopped timer. + */ +static void cpwd_pingtimer(struct cpwd *p, int index) +{ + if (cpwd_readb(p->devs[index].regs + WD_STATUS) & WD_S_RUNNING) + cpwd_readw(p->devs[index].regs + WD_DCNTR); +} + +/* Stop a running watchdog timer-- the timer actually keeps + * running, but the interrupt is masked so that no action is + * taken upon expiration. + */ +static void cpwd_stoptimer(struct cpwd *p, int index) +{ + if (cpwd_readb(p->devs[index].regs + WD_STATUS) & WD_S_RUNNING) { + cpwd_toggleintr(p, index, WD_INTR_OFF); + + if (p->broken) { + p->devs[index].runstatus |= WD_STAT_BSTOP; + cpwd_brokentimer(NULL); + } + } +} + +/* Start a watchdog timer with the specified limit value + * If the watchdog is running, it will be restarted with + * the provided limit value. + * + * This function will enable interrupts on the specified + * watchdog. + */ +static void cpwd_starttimer(struct cpwd *p, int index) +{ + if (p->broken) + p->devs[index].runstatus &= ~WD_STAT_BSTOP; + + p->devs[index].runstatus &= ~WD_STAT_SVCD; + + cpwd_writew(p->devs[index].timeout, p->devs[index].regs + WD_LIMIT); + cpwd_toggleintr(p, index, WD_INTR_ON); +} + +static int cpwd_getstatus(struct cpwd *p, int index) +{ + unsigned char stat = cpwd_readb(p->devs[index].regs + WD_STATUS); + unsigned char intr = cpwd_readb(p->devs[index].regs + PLD_IMASK); + unsigned char ret = WD_STOPPED; + + /* determine STOPPED */ + if (!stat) + return ret; + + /* determine EXPIRED vs FREERUN vs RUNNING */ + else if (WD_S_EXPIRED & stat) { + ret = WD_EXPIRED; + } else if (WD_S_RUNNING & stat) { + if (intr & p->devs[index].intr_mask) { + ret = WD_FREERUN; + } else { + /* Fudge WD_EXPIRED status for defective CP1400-- + * IF timer is running + * AND brokenstop is set + * AND an interrupt has been serviced + * we are WD_EXPIRED. + * + * IF timer is running + * AND brokenstop is set + * AND no interrupt has been serviced + * we are WD_FREERUN. + */ + if (p->broken && + (p->devs[index].runstatus & WD_STAT_BSTOP)) { + if (p->devs[index].runstatus & WD_STAT_SVCD) { + ret = WD_EXPIRED; + } else { + /* we could as well pretend + * we are expired */ + ret = WD_FREERUN; + } + } else { + ret = WD_RUNNING; + } + } + } + + /* determine SERVICED */ + if (p->devs[index].runstatus & WD_STAT_SVCD) + ret |= WD_SERVICED; + + return ret; +} + +static irqreturn_t cpwd_interrupt(int irq, void *dev_id) +{ + struct cpwd *p = dev_id; + + /* Only WD0 will interrupt-- others are NMI and we won't + * see them here.... + */ + spin_lock_irq(&p->lock); + + cpwd_stoptimer(p, WD0_ID); + p->devs[WD0_ID].runstatus |= WD_STAT_SVCD; + + spin_unlock_irq(&p->lock); + + return IRQ_HANDLED; +} + +static int cpwd_open(struct inode *inode, struct file *f) +{ + struct cpwd *p = cpwd_device; + + mutex_lock(&cpwd_mutex); + switch (iminor(inode)) { + case WD0_MINOR: + case WD1_MINOR: + case WD2_MINOR: + break; + + default: + mutex_unlock(&cpwd_mutex); + return -ENODEV; + } + + /* Register IRQ on first open of device */ + if (!p->initialized) { + if (request_irq(p->irq, &cpwd_interrupt, + IRQF_SHARED, DRIVER_NAME, p)) { + pr_err("Cannot register IRQ %d\n", p->irq); + mutex_unlock(&cpwd_mutex); + return -EBUSY; + } + p->initialized = true; + } + + mutex_unlock(&cpwd_mutex); + + return nonseekable_open(inode, f); +} + +static int cpwd_release(struct inode *inode, struct file *file) +{ + return 0; +} + +static long cpwd_ioctl(struct file *file, unsigned int cmd, unsigned long arg) +{ + static const struct watchdog_info info = { + .options = WDIOF_SETTIMEOUT, + .firmware_version = 1, + .identity = DRIVER_NAME, + }; + void __user *argp = (void __user *)arg; + struct inode *inode = file_inode(file); + int index = iminor(inode) - WD0_MINOR; + struct cpwd *p = cpwd_device; + int setopt = 0; + + switch (cmd) { + /* Generic Linux IOCTLs */ + case WDIOC_GETSUPPORT: + if (copy_to_user(argp, &info, sizeof(struct watchdog_info))) + return -EFAULT; + break; + + case WDIOC_GETSTATUS: + case WDIOC_GETBOOTSTATUS: + if (put_user(0, (int __user *)argp)) + return -EFAULT; + break; + + case WDIOC_KEEPALIVE: + cpwd_pingtimer(p, index); + break; + + case WDIOC_SETOPTIONS: + if (copy_from_user(&setopt, argp, sizeof(unsigned int))) + return -EFAULT; + + if (setopt & WDIOS_DISABLECARD) { + if (p->enabled) + return -EINVAL; + cpwd_stoptimer(p, index); + } else if (setopt & WDIOS_ENABLECARD) { + cpwd_starttimer(p, index); + } else { + return -EINVAL; + } + break; + + /* Solaris-compatible IOCTLs */ + case WIOCGSTAT: + setopt = cpwd_getstatus(p, index); + if (copy_to_user(argp, &setopt, sizeof(unsigned int))) + return -EFAULT; + break; + + case WIOCSTART: + cpwd_starttimer(p, index); + break; + + case WIOCSTOP: + if (p->enabled) + return -EINVAL; + + cpwd_stoptimer(p, index); + break; + + default: + return -EINVAL; + } + + return 0; +} + +static long cpwd_compat_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) +{ + int rval = -ENOIOCTLCMD; + + switch (cmd) { + /* solaris ioctls are specific to this driver */ + case WIOCSTART: + case WIOCSTOP: + case WIOCGSTAT: + mutex_lock(&cpwd_mutex); + rval = cpwd_ioctl(file, cmd, arg); + mutex_unlock(&cpwd_mutex); + break; + + /* everything else is handled by the generic compat layer */ + default: + break; + } + + return rval; +} + +static ssize_t cpwd_write(struct file *file, const char __user *buf, + size_t count, loff_t *ppos) +{ + struct inode *inode = file_inode(file); + struct cpwd *p = cpwd_device; + int index = iminor(inode); + + if (count) { + cpwd_pingtimer(p, index); + return 1; + } + + return 0; +} + +static ssize_t cpwd_read(struct file *file, char __user *buffer, + size_t count, loff_t *ppos) +{ + return -EINVAL; +} + +static const struct file_operations cpwd_fops = { + .owner = THIS_MODULE, + .unlocked_ioctl = cpwd_ioctl, + .compat_ioctl = cpwd_compat_ioctl, + .open = cpwd_open, + .write = cpwd_write, + .read = cpwd_read, + .release = cpwd_release, + .llseek = no_llseek, +}; + +static int cpwd_probe(struct platform_device *op) +{ + struct device_node *options; + const char *str_prop; + const void *prop_val; + int i, err = -EINVAL; + struct cpwd *p; + + if (cpwd_device) + return -EINVAL; + + p = devm_kzalloc(&op->dev, sizeof(*p), GFP_KERNEL); + if (!p) + return -ENOMEM; + + p->irq = op->archdata.irqs[0]; + + spin_lock_init(&p->lock); + + p->regs = of_ioremap(&op->resource[0], 0, + 4 * WD_TIMER_REGSZ, DRIVER_NAME); + if (!p->regs) { + pr_err("Unable to map registers\n"); + return -ENOMEM; + } + + options = of_find_node_by_path("/options"); + if (!options) { + err = -ENODEV; + pr_err("Unable to find /options node\n"); + goto out_iounmap; + } + + prop_val = of_get_property(options, "watchdog-enable?", NULL); + p->enabled = (prop_val ? true : false); + + prop_val = of_get_property(options, "watchdog-reboot?", NULL); + p->reboot = (prop_val ? true : false); + + str_prop = of_get_property(options, "watchdog-timeout", NULL); + if (str_prop) + p->timeout = simple_strtoul(str_prop, NULL, 10); + + /* CP1400s seem to have broken PLD implementations-- the + * interrupt_mask register cannot be written, so no timer + * interrupts can be masked within the PLD. + */ + str_prop = of_get_property(op->dev.of_node, "model", NULL); + p->broken = (str_prop && !strcmp(str_prop, WD_BADMODEL)); + + if (!p->enabled) + cpwd_toggleintr(p, -1, WD_INTR_OFF); + + for (i = 0; i < WD_NUMDEVS; i++) { + static const char *cpwd_names[] = { "RIC", "XIR", "POR" }; + static int *parms[] = { &wd0_timeout, + &wd1_timeout, + &wd2_timeout }; + struct miscdevice *mp = &p->devs[i].misc; + + mp->minor = WD0_MINOR + i; + mp->name = cpwd_names[i]; + mp->fops = &cpwd_fops; + + p->devs[i].regs = p->regs + (i * WD_TIMER_REGSZ); + p->devs[i].intr_mask = (WD0_INTR_MASK << i); + p->devs[i].runstatus &= ~WD_STAT_BSTOP; + p->devs[i].runstatus |= WD_STAT_INIT; + p->devs[i].timeout = p->timeout; + if (*parms[i]) + p->devs[i].timeout = *parms[i]; + + err = misc_register(&p->devs[i].misc); + if (err) { + pr_err("Could not register misc device for dev %d\n", + i); + goto out_unregister; + } + } + + if (p->broken) { + timer_setup(&cpwd_timer, cpwd_brokentimer, 0); + cpwd_timer.expires = WD_BTIMEOUT; + + pr_info("PLD defect workaround enabled for model %s\n", + WD_BADMODEL); + } + + platform_set_drvdata(op, p); + cpwd_device = p; + return 0; + +out_unregister: + for (i--; i >= 0; i--) + misc_deregister(&p->devs[i].misc); + +out_iounmap: + of_iounmap(&op->resource[0], p->regs, 4 * WD_TIMER_REGSZ); + + return err; +} + +static int cpwd_remove(struct platform_device *op) +{ + struct cpwd *p = platform_get_drvdata(op); + int i; + + for (i = 0; i < WD_NUMDEVS; i++) { + misc_deregister(&p->devs[i].misc); + + if (!p->enabled) { + cpwd_stoptimer(p, i); + if (p->devs[i].runstatus & WD_STAT_BSTOP) + cpwd_resetbrokentimer(p, i); + } + } + + if (p->broken) + del_timer_sync(&cpwd_timer); + + if (p->initialized) + free_irq(p->irq, p); + + of_iounmap(&op->resource[0], p->regs, 4 * WD_TIMER_REGSZ); + + cpwd_device = NULL; + + return 0; +} + +static const struct of_device_id cpwd_match[] = { + { + .name = "watchdog", + }, + {}, +}; +MODULE_DEVICE_TABLE(of, cpwd_match); + +static struct platform_driver cpwd_driver = { + .driver = { + .name = DRIVER_NAME, + .of_match_table = cpwd_match, + }, + .probe = cpwd_probe, + .remove = cpwd_remove, +}; + +module_platform_driver(cpwd_driver); diff --git a/drivers/watchdog/da9052_wdt.c b/drivers/watchdog/da9052_wdt.c new file mode 100644 index 000000000..e263bad99 --- /dev/null +++ b/drivers/watchdog/da9052_wdt.c @@ -0,0 +1,202 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * System monitoring driver for DA9052 PMICs. + * + * Copyright(c) 2012 Dialog Semiconductor Ltd. + * + * Author: Anthony Olech <Anthony.Olech@diasemi.com> + * + */ + +#include <linux/module.h> +#include <linux/delay.h> +#include <linux/uaccess.h> +#include <linux/platform_device.h> +#include <linux/time.h> +#include <linux/watchdog.h> +#include <linux/types.h> +#include <linux/kernel.h> +#include <linux/jiffies.h> + +#include <linux/mfd/da9052/reg.h> +#include <linux/mfd/da9052/da9052.h> + +#define DA9052_DEF_TIMEOUT 4 +#define DA9052_TWDMIN 256 + +struct da9052_wdt_data { + struct watchdog_device wdt; + struct da9052 *da9052; + unsigned long jpast; +}; + +static const struct { + u8 reg_val; + int time; /* Seconds */ +} da9052_wdt_maps[] = { + { 1, 2 }, + { 2, 4 }, + { 3, 8 }, + { 4, 16 }, + { 5, 32 }, + { 5, 33 }, /* Actual time 32.768s so included both 32s and 33s */ + { 6, 65 }, + { 6, 66 }, /* Actual time 65.536s so include both, 65s and 66s */ + { 7, 131 }, +}; + + +static int da9052_wdt_set_timeout(struct watchdog_device *wdt_dev, + unsigned int timeout) +{ + struct da9052_wdt_data *driver_data = watchdog_get_drvdata(wdt_dev); + struct da9052 *da9052 = driver_data->da9052; + int ret, i; + + /* + * Disable the Watchdog timer before setting + * new time out. + */ + ret = da9052_reg_update(da9052, DA9052_CONTROL_D_REG, + DA9052_CONTROLD_TWDSCALE, 0); + if (ret < 0) { + dev_err(da9052->dev, "Failed to disable watchdog bit, %d\n", + ret); + return ret; + } + if (timeout) { + /* + * To change the timeout, da9052 needs to + * be disabled for at least 150 us. + */ + udelay(150); + + /* Set the desired timeout */ + for (i = 0; i < ARRAY_SIZE(da9052_wdt_maps); i++) + if (da9052_wdt_maps[i].time == timeout) + break; + + if (i == ARRAY_SIZE(da9052_wdt_maps)) + ret = -EINVAL; + else + ret = da9052_reg_update(da9052, DA9052_CONTROL_D_REG, + DA9052_CONTROLD_TWDSCALE, + da9052_wdt_maps[i].reg_val); + if (ret < 0) { + dev_err(da9052->dev, + "Failed to update timescale bit, %d\n", ret); + return ret; + } + + wdt_dev->timeout = timeout; + driver_data->jpast = jiffies; + } + + return 0; +} + +static int da9052_wdt_start(struct watchdog_device *wdt_dev) +{ + return da9052_wdt_set_timeout(wdt_dev, wdt_dev->timeout); +} + +static int da9052_wdt_stop(struct watchdog_device *wdt_dev) +{ + return da9052_wdt_set_timeout(wdt_dev, 0); +} + +static int da9052_wdt_ping(struct watchdog_device *wdt_dev) +{ + struct da9052_wdt_data *driver_data = watchdog_get_drvdata(wdt_dev); + struct da9052 *da9052 = driver_data->da9052; + unsigned long msec, jnow = jiffies; + int ret; + + /* + * We have a minimum time for watchdog window called TWDMIN. A write + * to the watchdog before this elapsed time should cause an error. + */ + msec = (jnow - driver_data->jpast) * 1000/HZ; + if (msec < DA9052_TWDMIN) + mdelay(msec); + + /* Reset the watchdog timer */ + ret = da9052_reg_update(da9052, DA9052_CONTROL_D_REG, + DA9052_CONTROLD_WATCHDOG, 1 << 7); + if (ret < 0) + return ret; + + /* + * FIXME: Reset the watchdog core, in general PMIC + * is supposed to do this + */ + return da9052_reg_update(da9052, DA9052_CONTROL_D_REG, + DA9052_CONTROLD_WATCHDOG, 0 << 7); +} + +static const struct watchdog_info da9052_wdt_info = { + .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING, + .identity = "DA9052 Watchdog", +}; + +static const struct watchdog_ops da9052_wdt_ops = { + .owner = THIS_MODULE, + .start = da9052_wdt_start, + .stop = da9052_wdt_stop, + .ping = da9052_wdt_ping, + .set_timeout = da9052_wdt_set_timeout, +}; + + +static int da9052_wdt_probe(struct platform_device *pdev) +{ + struct da9052 *da9052 = dev_get_drvdata(pdev->dev.parent); + struct da9052_wdt_data *driver_data; + struct watchdog_device *da9052_wdt; + int ret; + + driver_data = devm_kzalloc(&pdev->dev, sizeof(*driver_data), + GFP_KERNEL); + if (!driver_data) + return -ENOMEM; + driver_data->da9052 = da9052; + + da9052_wdt = &driver_data->wdt; + + da9052_wdt->timeout = DA9052_DEF_TIMEOUT; + da9052_wdt->info = &da9052_wdt_info; + da9052_wdt->ops = &da9052_wdt_ops; + da9052_wdt->parent = &pdev->dev; + watchdog_set_drvdata(da9052_wdt, driver_data); + + ret = da9052_reg_update(da9052, DA9052_CONTROL_D_REG, + DA9052_CONTROLD_TWDSCALE, 0); + if (ret < 0) { + dev_err(&pdev->dev, "Failed to disable watchdog bits, %d\n", + ret); + return ret; + } + + ret = devm_watchdog_register_device(&pdev->dev, &driver_data->wdt); + if (ret != 0) { + dev_err(da9052->dev, "watchdog_register_device() failed: %d\n", + ret); + return ret; + } + + return ret; +} + +static struct platform_driver da9052_wdt_driver = { + .probe = da9052_wdt_probe, + .driver = { + .name = "da9052-watchdog", + }, +}; + +module_platform_driver(da9052_wdt_driver); + +MODULE_AUTHOR("Anthony Olech <Anthony.Olech@diasemi.com>"); +MODULE_DESCRIPTION("DA9052 SM Device Driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:da9052-watchdog"); diff --git a/drivers/watchdog/da9055_wdt.c b/drivers/watchdog/da9055_wdt.c new file mode 100644 index 000000000..26a5b2984 --- /dev/null +++ b/drivers/watchdog/da9055_wdt.c @@ -0,0 +1,169 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * System monitoring driver for DA9055 PMICs. + * + * Copyright(c) 2012 Dialog Semiconductor Ltd. + * + * Author: David Dajun Chen <dchen@diasemi.com> + * + */ + +#include <linux/module.h> +#include <linux/types.h> +#include <linux/kernel.h> +#include <linux/slab.h> +#include <linux/platform_device.h> +#include <linux/watchdog.h> +#include <linux/delay.h> + +#include <linux/mfd/da9055/core.h> +#include <linux/mfd/da9055/reg.h> + +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); +MODULE_PARM_DESC(nowayout, + "Watchdog cannot be stopped once started (default=" + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); + +#define DA9055_DEF_TIMEOUT 4 +#define DA9055_TWDMIN 256 + +struct da9055_wdt_data { + struct watchdog_device wdt; + struct da9055 *da9055; +}; + +static const struct { + u8 reg_val; + int user_time; /* In seconds */ +} da9055_wdt_maps[] = { + { 0, 0 }, + { 1, 2 }, + { 2, 4 }, + { 3, 8 }, + { 4, 16 }, + { 5, 32 }, + { 5, 33 }, /* Actual time 32.768s so included both 32s and 33s */ + { 6, 65 }, + { 6, 66 }, /* Actual time 65.536s so include both, 65s and 66s */ + { 7, 131 }, +}; + +static int da9055_wdt_set_timeout(struct watchdog_device *wdt_dev, + unsigned int timeout) +{ + struct da9055_wdt_data *driver_data = watchdog_get_drvdata(wdt_dev); + struct da9055 *da9055 = driver_data->da9055; + int ret, i; + + for (i = 0; i < ARRAY_SIZE(da9055_wdt_maps); i++) + if (da9055_wdt_maps[i].user_time == timeout) + break; + + if (i == ARRAY_SIZE(da9055_wdt_maps)) + ret = -EINVAL; + else + ret = da9055_reg_update(da9055, DA9055_REG_CONTROL_B, + DA9055_TWDSCALE_MASK, + da9055_wdt_maps[i].reg_val << + DA9055_TWDSCALE_SHIFT); + if (ret < 0) { + dev_err(da9055->dev, + "Failed to update timescale bit, %d\n", ret); + return ret; + } + + wdt_dev->timeout = timeout; + + return 0; +} + +static int da9055_wdt_ping(struct watchdog_device *wdt_dev) +{ + struct da9055_wdt_data *driver_data = watchdog_get_drvdata(wdt_dev); + struct da9055 *da9055 = driver_data->da9055; + + /* + * We have a minimum time for watchdog window called TWDMIN. A write + * to the watchdog before this elapsed time will cause an error. + */ + mdelay(DA9055_TWDMIN); + + /* Reset the watchdog timer */ + return da9055_reg_update(da9055, DA9055_REG_CONTROL_E, + DA9055_WATCHDOG_MASK, 1); +} + +static int da9055_wdt_start(struct watchdog_device *wdt_dev) +{ + return da9055_wdt_set_timeout(wdt_dev, wdt_dev->timeout); +} + +static int da9055_wdt_stop(struct watchdog_device *wdt_dev) +{ + return da9055_wdt_set_timeout(wdt_dev, 0); +} + +static const struct watchdog_info da9055_wdt_info = { + .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING, + .identity = "DA9055 Watchdog", +}; + +static const struct watchdog_ops da9055_wdt_ops = { + .owner = THIS_MODULE, + .start = da9055_wdt_start, + .stop = da9055_wdt_stop, + .ping = da9055_wdt_ping, + .set_timeout = da9055_wdt_set_timeout, +}; + +static int da9055_wdt_probe(struct platform_device *pdev) +{ + struct da9055 *da9055 = dev_get_drvdata(pdev->dev.parent); + struct da9055_wdt_data *driver_data; + struct watchdog_device *da9055_wdt; + int ret; + + driver_data = devm_kzalloc(&pdev->dev, sizeof(*driver_data), + GFP_KERNEL); + if (!driver_data) + return -ENOMEM; + + driver_data->da9055 = da9055; + + da9055_wdt = &driver_data->wdt; + + da9055_wdt->timeout = DA9055_DEF_TIMEOUT; + da9055_wdt->info = &da9055_wdt_info; + da9055_wdt->ops = &da9055_wdt_ops; + da9055_wdt->parent = &pdev->dev; + watchdog_set_nowayout(da9055_wdt, nowayout); + watchdog_set_drvdata(da9055_wdt, driver_data); + + ret = da9055_wdt_stop(da9055_wdt); + if (ret < 0) { + dev_err(&pdev->dev, "Failed to stop watchdog, %d\n", ret); + return ret; + } + + ret = devm_watchdog_register_device(&pdev->dev, &driver_data->wdt); + if (ret != 0) + dev_err(da9055->dev, "watchdog_register_device() failed: %d\n", + ret); + + return ret; +} + +static struct platform_driver da9055_wdt_driver = { + .probe = da9055_wdt_probe, + .driver = { + .name = "da9055-watchdog", + }, +}; + +module_platform_driver(da9055_wdt_driver); + +MODULE_AUTHOR("David Dajun Chen <dchen@diasemi.com>"); +MODULE_DESCRIPTION("DA9055 watchdog"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:da9055-watchdog"); diff --git a/drivers/watchdog/da9062_wdt.c b/drivers/watchdog/da9062_wdt.c new file mode 100644 index 000000000..132d45d00 --- /dev/null +++ b/drivers/watchdog/da9062_wdt.c @@ -0,0 +1,230 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Watchdog device driver for DA9062 and DA9061 PMICs + * Copyright (C) 2015 Dialog Semiconductor Ltd. + * + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/watchdog.h> +#include <linux/platform_device.h> +#include <linux/uaccess.h> +#include <linux/slab.h> +#include <linux/delay.h> +#include <linux/jiffies.h> +#include <linux/mfd/da9062/registers.h> +#include <linux/mfd/da9062/core.h> +#include <linux/regmap.h> +#include <linux/of.h> + +static const unsigned int wdt_timeout[] = { 0, 2, 4, 8, 16, 32, 65, 131 }; +#define DA9062_TWDSCALE_DISABLE 0 +#define DA9062_TWDSCALE_MIN 1 +#define DA9062_TWDSCALE_MAX (ARRAY_SIZE(wdt_timeout) - 1) +#define DA9062_WDT_MIN_TIMEOUT wdt_timeout[DA9062_TWDSCALE_MIN] +#define DA9062_WDT_MAX_TIMEOUT wdt_timeout[DA9062_TWDSCALE_MAX] +#define DA9062_WDG_DEFAULT_TIMEOUT wdt_timeout[DA9062_TWDSCALE_MAX-1] +#define DA9062_RESET_PROTECTION_MS 300 + +struct da9062_watchdog { + struct da9062 *hw; + struct watchdog_device wdtdev; +}; + +static unsigned int da9062_wdt_timeout_to_sel(unsigned int secs) +{ + unsigned int i; + + for (i = DA9062_TWDSCALE_MIN; i <= DA9062_TWDSCALE_MAX; i++) { + if (wdt_timeout[i] >= secs) + return i; + } + + return DA9062_TWDSCALE_MAX; +} + +static int da9062_reset_watchdog_timer(struct da9062_watchdog *wdt) +{ + int ret; + + ret = regmap_update_bits(wdt->hw->regmap, + DA9062AA_CONTROL_F, + DA9062AA_WATCHDOG_MASK, + DA9062AA_WATCHDOG_MASK); + + return ret; +} + +static int da9062_wdt_update_timeout_register(struct da9062_watchdog *wdt, + unsigned int regval) +{ + struct da9062 *chip = wdt->hw; + + regmap_update_bits(chip->regmap, + DA9062AA_CONTROL_D, + DA9062AA_TWDSCALE_MASK, + DA9062_TWDSCALE_DISABLE); + + usleep_range(150, 300); + + return regmap_update_bits(chip->regmap, + DA9062AA_CONTROL_D, + DA9062AA_TWDSCALE_MASK, + regval); +} + +static int da9062_wdt_start(struct watchdog_device *wdd) +{ + struct da9062_watchdog *wdt = watchdog_get_drvdata(wdd); + unsigned int selector; + int ret; + + selector = da9062_wdt_timeout_to_sel(wdt->wdtdev.timeout); + ret = da9062_wdt_update_timeout_register(wdt, selector); + if (ret) + dev_err(wdt->hw->dev, "Watchdog failed to start (err = %d)\n", + ret); + + return ret; +} + +static int da9062_wdt_stop(struct watchdog_device *wdd) +{ + struct da9062_watchdog *wdt = watchdog_get_drvdata(wdd); + int ret; + + ret = regmap_update_bits(wdt->hw->regmap, + DA9062AA_CONTROL_D, + DA9062AA_TWDSCALE_MASK, + DA9062_TWDSCALE_DISABLE); + if (ret) + dev_err(wdt->hw->dev, "Watchdog failed to stop (err = %d)\n", + ret); + + return ret; +} + +static int da9062_wdt_ping(struct watchdog_device *wdd) +{ + struct da9062_watchdog *wdt = watchdog_get_drvdata(wdd); + int ret; + + ret = da9062_reset_watchdog_timer(wdt); + if (ret) + dev_err(wdt->hw->dev, "Failed to ping the watchdog (err = %d)\n", + ret); + + return ret; +} + +static int da9062_wdt_set_timeout(struct watchdog_device *wdd, + unsigned int timeout) +{ + struct da9062_watchdog *wdt = watchdog_get_drvdata(wdd); + unsigned int selector; + int ret; + + selector = da9062_wdt_timeout_to_sel(timeout); + ret = da9062_wdt_update_timeout_register(wdt, selector); + if (ret) + dev_err(wdt->hw->dev, "Failed to set watchdog timeout (err = %d)\n", + ret); + else + wdd->timeout = wdt_timeout[selector]; + + return ret; +} + +static int da9062_wdt_restart(struct watchdog_device *wdd, unsigned long action, + void *data) +{ + struct da9062_watchdog *wdt = watchdog_get_drvdata(wdd); + int ret; + + ret = regmap_write(wdt->hw->regmap, + DA9062AA_CONTROL_F, + DA9062AA_SHUTDOWN_MASK); + if (ret) + dev_alert(wdt->hw->dev, "Failed to shutdown (err = %d)\n", + ret); + + /* wait for reset to assert... */ + mdelay(500); + + return ret; +} + +static const struct watchdog_info da9062_watchdog_info = { + .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING, + .identity = "DA9062 WDT", +}; + +static const struct watchdog_ops da9062_watchdog_ops = { + .owner = THIS_MODULE, + .start = da9062_wdt_start, + .stop = da9062_wdt_stop, + .ping = da9062_wdt_ping, + .set_timeout = da9062_wdt_set_timeout, + .restart = da9062_wdt_restart, +}; + +static const struct of_device_id da9062_compatible_id_table[] = { + { .compatible = "dlg,da9062-watchdog", }, + { }, +}; + +MODULE_DEVICE_TABLE(of, da9062_compatible_id_table); + +static int da9062_wdt_probe(struct platform_device *pdev) +{ + int ret; + struct da9062 *chip; + struct da9062_watchdog *wdt; + + chip = dev_get_drvdata(pdev->dev.parent); + if (!chip) + return -EINVAL; + + wdt = devm_kzalloc(&pdev->dev, sizeof(*wdt), GFP_KERNEL); + if (!wdt) + return -ENOMEM; + + wdt->hw = chip; + + wdt->wdtdev.info = &da9062_watchdog_info; + wdt->wdtdev.ops = &da9062_watchdog_ops; + wdt->wdtdev.min_timeout = DA9062_WDT_MIN_TIMEOUT; + wdt->wdtdev.max_timeout = DA9062_WDT_MAX_TIMEOUT; + wdt->wdtdev.min_hw_heartbeat_ms = DA9062_RESET_PROTECTION_MS; + wdt->wdtdev.timeout = DA9062_WDG_DEFAULT_TIMEOUT; + wdt->wdtdev.status = WATCHDOG_NOWAYOUT_INIT_STATUS; + wdt->wdtdev.parent = &pdev->dev; + + watchdog_set_restart_priority(&wdt->wdtdev, 128); + + watchdog_set_drvdata(&wdt->wdtdev, wdt); + + ret = devm_watchdog_register_device(&pdev->dev, &wdt->wdtdev); + if (ret < 0) { + dev_err(wdt->hw->dev, + "watchdog registration failed (%d)\n", ret); + return ret; + } + + return da9062_wdt_ping(&wdt->wdtdev); +} + +static struct platform_driver da9062_wdt_driver = { + .probe = da9062_wdt_probe, + .driver = { + .name = "da9062-watchdog", + .of_match_table = da9062_compatible_id_table, + }, +}; +module_platform_driver(da9062_wdt_driver); + +MODULE_AUTHOR("S Twiss <stwiss.opensource@diasemi.com>"); +MODULE_DESCRIPTION("WDT device driver for Dialog DA9062 and DA9061"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:da9062-watchdog"); diff --git a/drivers/watchdog/da9063_wdt.c b/drivers/watchdog/da9063_wdt.c new file mode 100644 index 000000000..384dca16a --- /dev/null +++ b/drivers/watchdog/da9063_wdt.c @@ -0,0 +1,239 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Watchdog driver for DA9063 PMICs. + * + * Copyright(c) 2012 Dialog Semiconductor Ltd. + * + * Author: Mariusz Wojtasik <mariusz.wojtasik@diasemi.com> + * + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/watchdog.h> +#include <linux/platform_device.h> +#include <linux/uaccess.h> +#include <linux/slab.h> +#include <linux/delay.h> +#include <linux/mfd/da9063/registers.h> +#include <linux/mfd/da9063/core.h> +#include <linux/regmap.h> + +/* + * Watchdog selector to timeout in seconds. + * 0: WDT disabled; + * others: timeout = 2048 ms * 2^(TWDSCALE-1). + */ +static const unsigned int wdt_timeout[] = { 0, 2, 4, 8, 16, 32, 65, 131 }; +#define DA9063_TWDSCALE_DISABLE 0 +#define DA9063_TWDSCALE_MIN 1 +#define DA9063_TWDSCALE_MAX (ARRAY_SIZE(wdt_timeout) - 1) +#define DA9063_WDT_MIN_TIMEOUT wdt_timeout[DA9063_TWDSCALE_MIN] +#define DA9063_WDT_MAX_TIMEOUT wdt_timeout[DA9063_TWDSCALE_MAX] +#define DA9063_WDG_TIMEOUT wdt_timeout[3] +#define DA9063_RESET_PROTECTION_MS 256 + +static unsigned int da9063_wdt_timeout_to_sel(unsigned int secs) +{ + unsigned int i; + + for (i = DA9063_TWDSCALE_MIN; i <= DA9063_TWDSCALE_MAX; i++) { + if (wdt_timeout[i] >= secs) + return i; + } + + return DA9063_TWDSCALE_MAX; +} + +/* + * Return 0 if watchdog is disabled, else non zero. + */ +static unsigned int da9063_wdt_is_running(struct da9063 *da9063) +{ + unsigned int val; + + regmap_read(da9063->regmap, DA9063_REG_CONTROL_D, &val); + + return val & DA9063_TWDSCALE_MASK; +} + +static int da9063_wdt_disable_timer(struct da9063 *da9063) +{ + return regmap_update_bits(da9063->regmap, DA9063_REG_CONTROL_D, + DA9063_TWDSCALE_MASK, + DA9063_TWDSCALE_DISABLE); +} + +static int +da9063_wdt_update_timeout(struct da9063 *da9063, unsigned int timeout) +{ + unsigned int regval; + int ret; + + /* + * The watchdog triggers a reboot if a timeout value is already + * programmed because the timeout value combines two functions + * in one: indicating the counter limit and starting the watchdog. + * The watchdog must be disabled to be able to change the timeout + * value if the watchdog is already running. Then we can set the + * new timeout value which enables the watchdog again. + */ + ret = da9063_wdt_disable_timer(da9063); + if (ret) + return ret; + + usleep_range(150, 300); + regval = da9063_wdt_timeout_to_sel(timeout); + + return regmap_update_bits(da9063->regmap, DA9063_REG_CONTROL_D, + DA9063_TWDSCALE_MASK, regval); +} + +static int da9063_wdt_start(struct watchdog_device *wdd) +{ + struct da9063 *da9063 = watchdog_get_drvdata(wdd); + int ret; + + ret = da9063_wdt_update_timeout(da9063, wdd->timeout); + if (ret) + dev_err(da9063->dev, "Watchdog failed to start (err = %d)\n", + ret); + + return ret; +} + +static int da9063_wdt_stop(struct watchdog_device *wdd) +{ + struct da9063 *da9063 = watchdog_get_drvdata(wdd); + int ret; + + ret = da9063_wdt_disable_timer(da9063); + if (ret) + dev_alert(da9063->dev, "Watchdog failed to stop (err = %d)\n", + ret); + + return ret; +} + +static int da9063_wdt_ping(struct watchdog_device *wdd) +{ + struct da9063 *da9063 = watchdog_get_drvdata(wdd); + int ret; + + ret = regmap_write(da9063->regmap, DA9063_REG_CONTROL_F, + DA9063_WATCHDOG); + if (ret) + dev_alert(da9063->dev, "Failed to ping the watchdog (err = %d)\n", + ret); + + return ret; +} + +static int da9063_wdt_set_timeout(struct watchdog_device *wdd, + unsigned int timeout) +{ + struct da9063 *da9063 = watchdog_get_drvdata(wdd); + int ret = 0; + + /* + * There are two cases when a set_timeout() will be called: + * 1. The watchdog is off and someone wants to set the timeout for the + * further use. + * 2. The watchdog is already running and a new timeout value should be + * set. + * + * The watchdog can't store a timeout value not equal zero without + * enabling the watchdog, so the timeout must be buffered by the driver. + */ + if (watchdog_active(wdd)) + ret = da9063_wdt_update_timeout(da9063, timeout); + + if (ret) + dev_err(da9063->dev, "Failed to set watchdog timeout (err = %d)\n", + ret); + else + wdd->timeout = wdt_timeout[da9063_wdt_timeout_to_sel(timeout)]; + + return ret; +} + +static int da9063_wdt_restart(struct watchdog_device *wdd, unsigned long action, + void *data) +{ + struct da9063 *da9063 = watchdog_get_drvdata(wdd); + int ret; + + ret = regmap_write(da9063->regmap, DA9063_REG_CONTROL_F, + DA9063_SHUTDOWN); + if (ret) + dev_alert(da9063->dev, "Failed to shutdown (err = %d)\n", + ret); + + return ret; +} + +static const struct watchdog_info da9063_watchdog_info = { + .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING, + .identity = "DA9063 Watchdog", +}; + +static const struct watchdog_ops da9063_watchdog_ops = { + .owner = THIS_MODULE, + .start = da9063_wdt_start, + .stop = da9063_wdt_stop, + .ping = da9063_wdt_ping, + .set_timeout = da9063_wdt_set_timeout, + .restart = da9063_wdt_restart, +}; + +static int da9063_wdt_probe(struct platform_device *pdev) +{ + struct da9063 *da9063; + struct watchdog_device *wdd; + + if (!pdev->dev.parent) + return -EINVAL; + + da9063 = dev_get_drvdata(pdev->dev.parent); + if (!da9063) + return -EINVAL; + + wdd = devm_kzalloc(&pdev->dev, sizeof(*wdd), GFP_KERNEL); + if (!wdd) + return -ENOMEM; + + wdd->info = &da9063_watchdog_info; + wdd->ops = &da9063_watchdog_ops; + wdd->min_timeout = DA9063_WDT_MIN_TIMEOUT; + wdd->max_timeout = DA9063_WDT_MAX_TIMEOUT; + wdd->min_hw_heartbeat_ms = DA9063_RESET_PROTECTION_MS; + wdd->timeout = DA9063_WDG_TIMEOUT; + wdd->parent = &pdev->dev; + + wdd->status = WATCHDOG_NOWAYOUT_INIT_STATUS; + + watchdog_set_restart_priority(wdd, 128); + + watchdog_set_drvdata(wdd, da9063); + + /* Change the timeout to the default value if the watchdog is running */ + if (da9063_wdt_is_running(da9063)) { + da9063_wdt_update_timeout(da9063, DA9063_WDG_TIMEOUT); + set_bit(WDOG_HW_RUNNING, &wdd->status); + } + + return devm_watchdog_register_device(&pdev->dev, wdd); +} + +static struct platform_driver da9063_wdt_driver = { + .probe = da9063_wdt_probe, + .driver = { + .name = DA9063_DRVNAME_WATCHDOG, + }, +}; +module_platform_driver(da9063_wdt_driver); + +MODULE_AUTHOR("Mariusz Wojtasik <mariusz.wojtasik@diasemi.com>"); +MODULE_DESCRIPTION("Watchdog driver for Dialog DA9063"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:" DA9063_DRVNAME_WATCHDOG); diff --git a/drivers/watchdog/davinci_wdt.c b/drivers/watchdog/davinci_wdt.c new file mode 100644 index 000000000..ebb85d60b --- /dev/null +++ b/drivers/watchdog/davinci_wdt.c @@ -0,0 +1,296 @@ +/* + * drivers/char/watchdog/davinci_wdt.c + * + * Watchdog driver for DaVinci DM644x/DM646x processors + * + * Copyright (C) 2006-2013 Texas Instruments. + * + * 2007 (c) MontaVista Software, Inc. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + */ + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/mod_devicetable.h> +#include <linux/types.h> +#include <linux/kernel.h> +#include <linux/watchdog.h> +#include <linux/platform_device.h> +#include <linux/io.h> +#include <linux/device.h> +#include <linux/clk.h> +#include <linux/err.h> + +#define MODULE_NAME "DAVINCI-WDT: " + +#define DEFAULT_HEARTBEAT 60 +#define MAX_HEARTBEAT 600 /* really the max margin is 264/27MHz*/ + +/* Timer register set definition */ +#define PID12 (0x0) +#define EMUMGT (0x4) +#define TIM12 (0x10) +#define TIM34 (0x14) +#define PRD12 (0x18) +#define PRD34 (0x1C) +#define TCR (0x20) +#define TGCR (0x24) +#define WDTCR (0x28) + +/* TCR bit definitions */ +#define ENAMODE12_DISABLED (0 << 6) +#define ENAMODE12_ONESHOT (1 << 6) +#define ENAMODE12_PERIODIC (2 << 6) + +/* TGCR bit definitions */ +#define TIM12RS_UNRESET (1 << 0) +#define TIM34RS_UNRESET (1 << 1) +#define TIMMODE_64BIT_WDOG (2 << 2) + +/* WDTCR bit definitions */ +#define WDEN (1 << 14) +#define WDFLAG (1 << 15) +#define WDKEY_SEQ0 (0xa5c6 << 16) +#define WDKEY_SEQ1 (0xda7e << 16) + +static int heartbeat; + +/* + * struct to hold data for each WDT device + * @base - base io address of WD device + * @clk - source clock of WDT + * @wdd - hold watchdog device as is in WDT core + */ +struct davinci_wdt_device { + void __iomem *base; + struct clk *clk; + struct watchdog_device wdd; +}; + +static int davinci_wdt_start(struct watchdog_device *wdd) +{ + u32 tgcr; + u32 timer_margin; + unsigned long wdt_freq; + struct davinci_wdt_device *davinci_wdt = watchdog_get_drvdata(wdd); + + wdt_freq = clk_get_rate(davinci_wdt->clk); + + /* disable, internal clock source */ + iowrite32(0, davinci_wdt->base + TCR); + /* reset timer, set mode to 64-bit watchdog, and unreset */ + iowrite32(0, davinci_wdt->base + TGCR); + tgcr = TIMMODE_64BIT_WDOG | TIM12RS_UNRESET | TIM34RS_UNRESET; + iowrite32(tgcr, davinci_wdt->base + TGCR); + /* clear counter regs */ + iowrite32(0, davinci_wdt->base + TIM12); + iowrite32(0, davinci_wdt->base + TIM34); + /* set timeout period */ + timer_margin = (((u64)wdd->timeout * wdt_freq) & 0xffffffff); + iowrite32(timer_margin, davinci_wdt->base + PRD12); + timer_margin = (((u64)wdd->timeout * wdt_freq) >> 32); + iowrite32(timer_margin, davinci_wdt->base + PRD34); + /* enable run continuously */ + iowrite32(ENAMODE12_PERIODIC, davinci_wdt->base + TCR); + /* Once the WDT is in pre-active state write to + * TIM12, TIM34, PRD12, PRD34, TCR, TGCR, WDTCR are + * write protected (except for the WDKEY field) + */ + /* put watchdog in pre-active state */ + iowrite32(WDKEY_SEQ0 | WDEN, davinci_wdt->base + WDTCR); + /* put watchdog in active state */ + iowrite32(WDKEY_SEQ1 | WDEN, davinci_wdt->base + WDTCR); + return 0; +} + +static int davinci_wdt_ping(struct watchdog_device *wdd) +{ + struct davinci_wdt_device *davinci_wdt = watchdog_get_drvdata(wdd); + + /* put watchdog in service state */ + iowrite32(WDKEY_SEQ0, davinci_wdt->base + WDTCR); + /* put watchdog in active state */ + iowrite32(WDKEY_SEQ1, davinci_wdt->base + WDTCR); + return 0; +} + +static unsigned int davinci_wdt_get_timeleft(struct watchdog_device *wdd) +{ + u64 timer_counter; + unsigned long freq; + u32 val; + struct davinci_wdt_device *davinci_wdt = watchdog_get_drvdata(wdd); + + /* if timeout has occured then return 0 */ + val = ioread32(davinci_wdt->base + WDTCR); + if (val & WDFLAG) + return 0; + + freq = clk_get_rate(davinci_wdt->clk); + + if (!freq) + return 0; + + timer_counter = ioread32(davinci_wdt->base + TIM12); + timer_counter |= ((u64)ioread32(davinci_wdt->base + TIM34) << 32); + + do_div(timer_counter, freq); + + return wdd->timeout - timer_counter; +} + +static int davinci_wdt_restart(struct watchdog_device *wdd, + unsigned long action, void *data) +{ + struct davinci_wdt_device *davinci_wdt = watchdog_get_drvdata(wdd); + u32 tgcr, wdtcr; + + /* disable, internal clock source */ + iowrite32(0, davinci_wdt->base + TCR); + + /* reset timer, set mode to 64-bit watchdog, and unreset */ + tgcr = 0; + iowrite32(tgcr, davinci_wdt->base + TGCR); + tgcr = TIMMODE_64BIT_WDOG | TIM12RS_UNRESET | TIM34RS_UNRESET; + iowrite32(tgcr, davinci_wdt->base + TGCR); + + /* clear counter and period regs */ + iowrite32(0, davinci_wdt->base + TIM12); + iowrite32(0, davinci_wdt->base + TIM34); + iowrite32(0, davinci_wdt->base + PRD12); + iowrite32(0, davinci_wdt->base + PRD34); + + /* put watchdog in pre-active state */ + wdtcr = WDKEY_SEQ0 | WDEN; + iowrite32(wdtcr, davinci_wdt->base + WDTCR); + + /* put watchdog in active state */ + wdtcr = WDKEY_SEQ1 | WDEN; + iowrite32(wdtcr, davinci_wdt->base + WDTCR); + + /* write an invalid value to the WDKEY field to trigger a restart */ + wdtcr = 0x00004000; + iowrite32(wdtcr, davinci_wdt->base + WDTCR); + + return 0; +} + +static const struct watchdog_info davinci_wdt_info = { + .options = WDIOF_KEEPALIVEPING, + .identity = "DaVinci/Keystone Watchdog", +}; + +static const struct watchdog_ops davinci_wdt_ops = { + .owner = THIS_MODULE, + .start = davinci_wdt_start, + .stop = davinci_wdt_ping, + .ping = davinci_wdt_ping, + .get_timeleft = davinci_wdt_get_timeleft, + .restart = davinci_wdt_restart, +}; + +static int davinci_wdt_probe(struct platform_device *pdev) +{ + int ret = 0; + struct device *dev = &pdev->dev; + struct resource *wdt_mem; + struct watchdog_device *wdd; + struct davinci_wdt_device *davinci_wdt; + + davinci_wdt = devm_kzalloc(dev, sizeof(*davinci_wdt), GFP_KERNEL); + if (!davinci_wdt) + return -ENOMEM; + + davinci_wdt->clk = devm_clk_get(dev, NULL); + + if (IS_ERR(davinci_wdt->clk)) { + if (PTR_ERR(davinci_wdt->clk) != -EPROBE_DEFER) + dev_err(&pdev->dev, "failed to get clock node\n"); + return PTR_ERR(davinci_wdt->clk); + } + + ret = clk_prepare_enable(davinci_wdt->clk); + if (ret) { + dev_err(&pdev->dev, "failed to prepare clock\n"); + return ret; + } + + platform_set_drvdata(pdev, davinci_wdt); + + wdd = &davinci_wdt->wdd; + wdd->info = &davinci_wdt_info; + wdd->ops = &davinci_wdt_ops; + wdd->min_timeout = 1; + wdd->max_timeout = MAX_HEARTBEAT; + wdd->timeout = DEFAULT_HEARTBEAT; + wdd->parent = &pdev->dev; + + watchdog_init_timeout(wdd, heartbeat, dev); + + dev_info(dev, "heartbeat %d sec\n", wdd->timeout); + + watchdog_set_drvdata(wdd, davinci_wdt); + watchdog_set_nowayout(wdd, 1); + watchdog_set_restart_priority(wdd, 128); + + wdt_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); + davinci_wdt->base = devm_ioremap_resource(dev, wdt_mem); + if (IS_ERR(davinci_wdt->base)) { + ret = PTR_ERR(davinci_wdt->base); + goto err_clk_disable; + } + + ret = watchdog_register_device(wdd); + if (ret) { + dev_err(dev, "cannot register watchdog device\n"); + goto err_clk_disable; + } + + return 0; + +err_clk_disable: + clk_disable_unprepare(davinci_wdt->clk); + + return ret; +} + +static int davinci_wdt_remove(struct platform_device *pdev) +{ + struct davinci_wdt_device *davinci_wdt = platform_get_drvdata(pdev); + + watchdog_unregister_device(&davinci_wdt->wdd); + clk_disable_unprepare(davinci_wdt->clk); + + return 0; +} + +static const struct of_device_id davinci_wdt_of_match[] = { + { .compatible = "ti,davinci-wdt", }, + {}, +}; +MODULE_DEVICE_TABLE(of, davinci_wdt_of_match); + +static struct platform_driver platform_wdt_driver = { + .driver = { + .name = "davinci-wdt", + .of_match_table = davinci_wdt_of_match, + }, + .probe = davinci_wdt_probe, + .remove = davinci_wdt_remove, +}; + +module_platform_driver(platform_wdt_driver); + +MODULE_AUTHOR("Texas Instruments"); +MODULE_DESCRIPTION("DaVinci Watchdog Driver"); + +module_param(heartbeat, int, 0); +MODULE_PARM_DESC(heartbeat, + "Watchdog heartbeat period in seconds from 1 to " + __MODULE_STRING(MAX_HEARTBEAT) ", default " + __MODULE_STRING(DEFAULT_HEARTBEAT)); + +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:davinci-wdt"); diff --git a/drivers/watchdog/diag288_wdt.c b/drivers/watchdog/diag288_wdt.c new file mode 100644 index 000000000..806a04a67 --- /dev/null +++ b/drivers/watchdog/diag288_wdt.c @@ -0,0 +1,316 @@ +/* + * Watchdog driver for z/VM and LPAR using the diag 288 interface. + * + * Under z/VM, expiration of the watchdog will send a "system restart" command + * to CP. + * + * The command can be altered using the module parameter "cmd". This is + * not recommended because it's only supported on z/VM but not whith LPAR. + * + * On LPAR, the watchdog will always trigger a system restart. the module + * paramter cmd is meaningless here. + * + * + * Copyright IBM Corp. 2004, 2013 + * Author(s): Arnd Bergmann (arndb@de.ibm.com) + * Philipp Hachtmann (phacht@de.ibm.com) + * + */ + +#define KMSG_COMPONENT "diag288_wdt" +#define pr_fmt(fmt) KMSG_COMPONENT ": " fmt + +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/slab.h> +#include <linux/miscdevice.h> +#include <linux/watchdog.h> +#include <linux/suspend.h> +#include <asm/ebcdic.h> +#include <asm/diag.h> +#include <linux/io.h> +#include <linux/uaccess.h> + +#define MAX_CMDLEN 240 +#define DEFAULT_CMD "SYSTEM RESTART" + +#define MIN_INTERVAL 15 /* Minimal time supported by diag88 */ +#define MAX_INTERVAL 3600 /* One hour should be enough - pure estimation */ + +#define WDT_DEFAULT_TIMEOUT 30 + +/* Function codes - init, change, cancel */ +#define WDT_FUNC_INIT 0 +#define WDT_FUNC_CHANGE 1 +#define WDT_FUNC_CANCEL 2 +#define WDT_FUNC_CONCEAL 0x80000000 + +/* Action codes for LPAR watchdog */ +#define LPARWDT_RESTART 0 + +static char wdt_cmd[MAX_CMDLEN] = DEFAULT_CMD; +static bool conceal_on; +static bool nowayout_info = WATCHDOG_NOWAYOUT; + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Arnd Bergmann <arndb@de.ibm.com>"); +MODULE_AUTHOR("Philipp Hachtmann <phacht@de.ibm.com>"); + +MODULE_DESCRIPTION("System z diag288 Watchdog Timer"); + +module_param_string(cmd, wdt_cmd, MAX_CMDLEN, 0644); +MODULE_PARM_DESC(cmd, "CP command that is run when the watchdog triggers (z/VM only)"); + +module_param_named(conceal, conceal_on, bool, 0644); +MODULE_PARM_DESC(conceal, "Enable the CONCEAL CP option while the watchdog is active (z/VM only)"); + +module_param_named(nowayout, nowayout_info, bool, 0444); +MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default = CONFIG_WATCHDOG_NOWAYOUT)"); + +MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR); +MODULE_ALIAS("vmwatchdog"); + +static int __diag288(unsigned int func, unsigned int timeout, + unsigned long action, unsigned int len) +{ + register unsigned long __func asm("2") = func; + register unsigned long __timeout asm("3") = timeout; + register unsigned long __action asm("4") = action; + register unsigned long __len asm("5") = len; + int err; + + err = -EINVAL; + asm volatile( + " diag %1, %3, 0x288\n" + "0: la %0, 0\n" + "1:\n" + EX_TABLE(0b, 1b) + : "+d" (err) : "d"(__func), "d"(__timeout), + "d"(__action), "d"(__len) : "1", "cc"); + return err; +} + +static int __diag288_vm(unsigned int func, unsigned int timeout, + char *cmd, size_t len) +{ + diag_stat_inc(DIAG_STAT_X288); + return __diag288(func, timeout, virt_to_phys(cmd), len); +} + +static int __diag288_lpar(unsigned int func, unsigned int timeout, + unsigned long action) +{ + diag_stat_inc(DIAG_STAT_X288); + return __diag288(func, timeout, action, 0); +} + +static unsigned long wdt_status; + +#define DIAG_WDOG_BUSY 0 + +static int wdt_start(struct watchdog_device *dev) +{ + char *ebc_cmd; + size_t len; + int ret; + unsigned int func; + + if (test_and_set_bit(DIAG_WDOG_BUSY, &wdt_status)) + return -EBUSY; + + ret = -ENODEV; + + if (MACHINE_IS_VM) { + ebc_cmd = kmalloc(MAX_CMDLEN, GFP_KERNEL); + if (!ebc_cmd) { + clear_bit(DIAG_WDOG_BUSY, &wdt_status); + return -ENOMEM; + } + len = strlcpy(ebc_cmd, wdt_cmd, MAX_CMDLEN); + ASCEBC(ebc_cmd, MAX_CMDLEN); + EBC_TOUPPER(ebc_cmd, MAX_CMDLEN); + + func = conceal_on ? (WDT_FUNC_INIT | WDT_FUNC_CONCEAL) + : WDT_FUNC_INIT; + ret = __diag288_vm(func, dev->timeout, ebc_cmd, len); + WARN_ON(ret != 0); + kfree(ebc_cmd); + } else { + ret = __diag288_lpar(WDT_FUNC_INIT, + dev->timeout, LPARWDT_RESTART); + } + + if (ret) { + pr_err("The watchdog cannot be activated\n"); + clear_bit(DIAG_WDOG_BUSY, &wdt_status); + return ret; + } + return 0; +} + +static int wdt_stop(struct watchdog_device *dev) +{ + int ret; + + diag_stat_inc(DIAG_STAT_X288); + ret = __diag288(WDT_FUNC_CANCEL, 0, 0, 0); + + clear_bit(DIAG_WDOG_BUSY, &wdt_status); + + return ret; +} + +static int wdt_ping(struct watchdog_device *dev) +{ + char *ebc_cmd; + size_t len; + int ret; + unsigned int func; + + ret = -ENODEV; + + if (MACHINE_IS_VM) { + ebc_cmd = kmalloc(MAX_CMDLEN, GFP_KERNEL); + if (!ebc_cmd) + return -ENOMEM; + len = strlcpy(ebc_cmd, wdt_cmd, MAX_CMDLEN); + ASCEBC(ebc_cmd, MAX_CMDLEN); + EBC_TOUPPER(ebc_cmd, MAX_CMDLEN); + + /* + * It seems to be ok to z/VM to use the init function to + * retrigger the watchdog. On LPAR WDT_FUNC_CHANGE must + * be used when the watchdog is running. + */ + func = conceal_on ? (WDT_FUNC_INIT | WDT_FUNC_CONCEAL) + : WDT_FUNC_INIT; + + ret = __diag288_vm(func, dev->timeout, ebc_cmd, len); + WARN_ON(ret != 0); + kfree(ebc_cmd); + } else { + ret = __diag288_lpar(WDT_FUNC_CHANGE, dev->timeout, 0); + } + + if (ret) + pr_err("The watchdog timer cannot be started or reset\n"); + return ret; +} + +static int wdt_set_timeout(struct watchdog_device * dev, unsigned int new_to) +{ + dev->timeout = new_to; + return wdt_ping(dev); +} + +static const struct watchdog_ops wdt_ops = { + .owner = THIS_MODULE, + .start = wdt_start, + .stop = wdt_stop, + .ping = wdt_ping, + .set_timeout = wdt_set_timeout, +}; + +static const struct watchdog_info wdt_info = { + .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE, + .firmware_version = 0, + .identity = "z Watchdog", +}; + +static struct watchdog_device wdt_dev = { + .parent = NULL, + .info = &wdt_info, + .ops = &wdt_ops, + .bootstatus = 0, + .timeout = WDT_DEFAULT_TIMEOUT, + .min_timeout = MIN_INTERVAL, + .max_timeout = MAX_INTERVAL, +}; + +/* + * It makes no sense to go into suspend while the watchdog is running. + * Depending on the memory size, the watchdog might trigger, while we + * are still saving the memory. + */ +static int wdt_suspend(void) +{ + if (test_and_set_bit(DIAG_WDOG_BUSY, &wdt_status)) { + pr_err("Linux cannot be suspended while the watchdog is in use\n"); + return notifier_from_errno(-EBUSY); + } + return NOTIFY_DONE; +} + +static int wdt_resume(void) +{ + clear_bit(DIAG_WDOG_BUSY, &wdt_status); + return NOTIFY_DONE; +} + +static int wdt_power_event(struct notifier_block *this, unsigned long event, + void *ptr) +{ + switch (event) { + case PM_POST_HIBERNATION: + case PM_POST_SUSPEND: + return wdt_resume(); + case PM_HIBERNATION_PREPARE: + case PM_SUSPEND_PREPARE: + return wdt_suspend(); + default: + return NOTIFY_DONE; + } +} + +static struct notifier_block wdt_power_notifier = { + .notifier_call = wdt_power_event, +}; + +static int __init diag288_init(void) +{ + int ret; + char ebc_begin[] = { + 194, 197, 199, 201, 213 + }; + + watchdog_set_nowayout(&wdt_dev, nowayout_info); + + if (MACHINE_IS_VM) { + if (__diag288_vm(WDT_FUNC_INIT, 15, + ebc_begin, sizeof(ebc_begin)) != 0) { + pr_err("The watchdog cannot be initialized\n"); + return -EINVAL; + } + } else { + if (__diag288_lpar(WDT_FUNC_INIT, 30, LPARWDT_RESTART)) { + pr_err("The watchdog cannot be initialized\n"); + return -EINVAL; + } + } + + if (__diag288_lpar(WDT_FUNC_CANCEL, 0, 0)) { + pr_err("The watchdog cannot be deactivated\n"); + return -EINVAL; + } + + ret = register_pm_notifier(&wdt_power_notifier); + if (ret) + return ret; + + ret = watchdog_register_device(&wdt_dev); + if (ret) + unregister_pm_notifier(&wdt_power_notifier); + + return ret; +} + +static void __exit diag288_exit(void) +{ + watchdog_unregister_device(&wdt_dev); + unregister_pm_notifier(&wdt_power_notifier); +} + +module_init(diag288_init); +module_exit(diag288_exit); diff --git a/drivers/watchdog/digicolor_wdt.c b/drivers/watchdog/digicolor_wdt.c new file mode 100644 index 000000000..a9e11df15 --- /dev/null +++ b/drivers/watchdog/digicolor_wdt.c @@ -0,0 +1,172 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Watchdog driver for Conexant Digicolor + * + * Copyright (C) 2015 Paradox Innovation Ltd. + * + */ + +#include <linux/types.h> +#include <linux/module.h> +#include <linux/io.h> +#include <linux/delay.h> +#include <linux/clk.h> +#include <linux/watchdog.h> +#include <linux/platform_device.h> +#include <linux/of_address.h> + +#define TIMER_A_CONTROL 0 +#define TIMER_A_COUNT 4 + +#define TIMER_A_ENABLE_COUNT BIT(0) +#define TIMER_A_ENABLE_WATCHDOG BIT(1) + +struct dc_wdt { + void __iomem *base; + struct clk *clk; + spinlock_t lock; +}; + +static unsigned timeout; +module_param(timeout, uint, 0); +MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds"); + +static void dc_wdt_set(struct dc_wdt *wdt, u32 ticks) +{ + unsigned long flags; + + spin_lock_irqsave(&wdt->lock, flags); + + writel_relaxed(0, wdt->base + TIMER_A_CONTROL); + writel_relaxed(ticks, wdt->base + TIMER_A_COUNT); + writel_relaxed(TIMER_A_ENABLE_COUNT | TIMER_A_ENABLE_WATCHDOG, + wdt->base + TIMER_A_CONTROL); + + spin_unlock_irqrestore(&wdt->lock, flags); +} + +static int dc_wdt_restart(struct watchdog_device *wdog, unsigned long action, + void *data) +{ + struct dc_wdt *wdt = watchdog_get_drvdata(wdog); + + dc_wdt_set(wdt, 1); + /* wait for reset to assert... */ + mdelay(500); + + return 0; +} + +static int dc_wdt_start(struct watchdog_device *wdog) +{ + struct dc_wdt *wdt = watchdog_get_drvdata(wdog); + + dc_wdt_set(wdt, wdog->timeout * clk_get_rate(wdt->clk)); + + return 0; +} + +static int dc_wdt_stop(struct watchdog_device *wdog) +{ + struct dc_wdt *wdt = watchdog_get_drvdata(wdog); + + writel_relaxed(0, wdt->base + TIMER_A_CONTROL); + + return 0; +} + +static int dc_wdt_set_timeout(struct watchdog_device *wdog, unsigned int t) +{ + struct dc_wdt *wdt = watchdog_get_drvdata(wdog); + + dc_wdt_set(wdt, t * clk_get_rate(wdt->clk)); + wdog->timeout = t; + + return 0; +} + +static unsigned int dc_wdt_get_timeleft(struct watchdog_device *wdog) +{ + struct dc_wdt *wdt = watchdog_get_drvdata(wdog); + uint32_t count = readl_relaxed(wdt->base + TIMER_A_COUNT); + + return count / clk_get_rate(wdt->clk); +} + +static const struct watchdog_ops dc_wdt_ops = { + .owner = THIS_MODULE, + .start = dc_wdt_start, + .stop = dc_wdt_stop, + .set_timeout = dc_wdt_set_timeout, + .get_timeleft = dc_wdt_get_timeleft, + .restart = dc_wdt_restart, +}; + +static const struct watchdog_info dc_wdt_info = { + .options = WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE + | WDIOF_KEEPALIVEPING, + .identity = "Conexant Digicolor Watchdog", +}; + +static struct watchdog_device dc_wdt_wdd = { + .info = &dc_wdt_info, + .ops = &dc_wdt_ops, + .min_timeout = 1, +}; + +static int dc_wdt_probe(struct platform_device *pdev) +{ + struct resource *res; + struct device *dev = &pdev->dev; + struct dc_wdt *wdt; + int ret; + + wdt = devm_kzalloc(dev, sizeof(struct dc_wdt), GFP_KERNEL); + if (!wdt) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + wdt->base = devm_ioremap_resource(dev, res); + if (IS_ERR(wdt->base)) + return PTR_ERR(wdt->base); + + wdt->clk = devm_clk_get(dev, NULL); + if (IS_ERR(wdt->clk)) + return PTR_ERR(wdt->clk); + dc_wdt_wdd.max_timeout = U32_MAX / clk_get_rate(wdt->clk); + dc_wdt_wdd.timeout = dc_wdt_wdd.max_timeout; + dc_wdt_wdd.parent = dev; + + spin_lock_init(&wdt->lock); + + watchdog_set_drvdata(&dc_wdt_wdd, wdt); + watchdog_set_restart_priority(&dc_wdt_wdd, 128); + watchdog_init_timeout(&dc_wdt_wdd, timeout, dev); + watchdog_stop_on_reboot(&dc_wdt_wdd); + ret = devm_watchdog_register_device(dev, &dc_wdt_wdd); + if (ret) { + dev_err(dev, "Failed to register watchdog device"); + return ret; + } + + return 0; +} + +static const struct of_device_id dc_wdt_of_match[] = { + { .compatible = "cnxt,cx92755-wdt", }, + {}, +}; +MODULE_DEVICE_TABLE(of, dc_wdt_of_match); + +static struct platform_driver dc_wdt_driver = { + .probe = dc_wdt_probe, + .driver = { + .name = "digicolor-wdt", + .of_match_table = dc_wdt_of_match, + }, +}; +module_platform_driver(dc_wdt_driver); + +MODULE_AUTHOR("Baruch Siach <baruch@tkos.co.il>"); +MODULE_DESCRIPTION("Driver for Conexant Digicolor watchdog timer"); +MODULE_LICENSE("GPL"); diff --git a/drivers/watchdog/dw_wdt.c b/drivers/watchdog/dw_wdt.c new file mode 100644 index 000000000..501aebb5b --- /dev/null +++ b/drivers/watchdog/dw_wdt.c @@ -0,0 +1,350 @@ +/* + * Copyright 2010-2011 Picochip Ltd., Jamie Iles + * http://www.picochip.com + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * This file implements a driver for the Synopsys DesignWare watchdog device + * in the many subsystems. The watchdog has 16 different timeout periods + * and these are a function of the input clock frequency. + * + * The DesignWare watchdog cannot be stopped once it has been started so we + * do not implement a stop function. The watchdog core will continue to send + * heartbeat requests after the watchdog device has been closed. + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/bitops.h> +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/err.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/of.h> +#include <linux/pm.h> +#include <linux/platform_device.h> +#include <linux/reset.h> +#include <linux/watchdog.h> + +#define WDOG_CONTROL_REG_OFFSET 0x00 +#define WDOG_CONTROL_REG_WDT_EN_MASK 0x01 +#define WDOG_CONTROL_REG_RESP_MODE_MASK 0x02 +#define WDOG_TIMEOUT_RANGE_REG_OFFSET 0x04 +#define WDOG_TIMEOUT_RANGE_TOPINIT_SHIFT 4 +#define WDOG_CURRENT_COUNT_REG_OFFSET 0x08 +#define WDOG_COUNTER_RESTART_REG_OFFSET 0x0c +#define WDOG_COUNTER_RESTART_KICK_VALUE 0x76 + +/* The maximum TOP (timeout period) value that can be set in the watchdog. */ +#define DW_WDT_MAX_TOP 15 + +#define DW_WDT_DEFAULT_SECONDS 30 + +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); +MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started " + "(default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); + +struct dw_wdt { + void __iomem *regs; + struct clk *clk; + unsigned long rate; + struct watchdog_device wdd; + struct reset_control *rst; + /* Save/restore */ + u32 control; + u32 timeout; +}; + +#define to_dw_wdt(wdd) container_of(wdd, struct dw_wdt, wdd) + +static inline int dw_wdt_is_enabled(struct dw_wdt *dw_wdt) +{ + return readl(dw_wdt->regs + WDOG_CONTROL_REG_OFFSET) & + WDOG_CONTROL_REG_WDT_EN_MASK; +} + +static inline int dw_wdt_top_in_seconds(struct dw_wdt *dw_wdt, unsigned top) +{ + /* + * There are 16 possible timeout values in 0..15 where the number of + * cycles is 2 ^ (16 + i) and the watchdog counts down. + */ + return (1U << (16 + top)) / dw_wdt->rate; +} + +static int dw_wdt_get_top(struct dw_wdt *dw_wdt) +{ + int top = readl(dw_wdt->regs + WDOG_TIMEOUT_RANGE_REG_OFFSET) & 0xF; + + return dw_wdt_top_in_seconds(dw_wdt, top); +} + +static int dw_wdt_ping(struct watchdog_device *wdd) +{ + struct dw_wdt *dw_wdt = to_dw_wdt(wdd); + + writel(WDOG_COUNTER_RESTART_KICK_VALUE, dw_wdt->regs + + WDOG_COUNTER_RESTART_REG_OFFSET); + + return 0; +} + +static int dw_wdt_set_timeout(struct watchdog_device *wdd, unsigned int top_s) +{ + struct dw_wdt *dw_wdt = to_dw_wdt(wdd); + int i, top_val = DW_WDT_MAX_TOP; + + /* + * Iterate over the timeout values until we find the closest match. We + * always look for >=. + */ + for (i = 0; i <= DW_WDT_MAX_TOP; ++i) + if (dw_wdt_top_in_seconds(dw_wdt, i) >= top_s) { + top_val = i; + break; + } + + /* + * Set the new value in the watchdog. Some versions of dw_wdt + * have have TOPINIT in the TIMEOUT_RANGE register (as per + * CP_WDT_DUAL_TOP in WDT_COMP_PARAMS_1). On those we + * effectively get a pat of the watchdog right here. + */ + writel(top_val | top_val << WDOG_TIMEOUT_RANGE_TOPINIT_SHIFT, + dw_wdt->regs + WDOG_TIMEOUT_RANGE_REG_OFFSET); + + wdd->timeout = dw_wdt_top_in_seconds(dw_wdt, top_val); + + return 0; +} + +static void dw_wdt_arm_system_reset(struct dw_wdt *dw_wdt) +{ + u32 val = readl(dw_wdt->regs + WDOG_CONTROL_REG_OFFSET); + + /* Disable interrupt mode; always perform system reset. */ + val &= ~WDOG_CONTROL_REG_RESP_MODE_MASK; + /* Enable watchdog. */ + val |= WDOG_CONTROL_REG_WDT_EN_MASK; + writel(val, dw_wdt->regs + WDOG_CONTROL_REG_OFFSET); +} + +static int dw_wdt_start(struct watchdog_device *wdd) +{ + struct dw_wdt *dw_wdt = to_dw_wdt(wdd); + + dw_wdt_set_timeout(wdd, wdd->timeout); + dw_wdt_arm_system_reset(dw_wdt); + + return 0; +} + +static int dw_wdt_stop(struct watchdog_device *wdd) +{ + struct dw_wdt *dw_wdt = to_dw_wdt(wdd); + + if (!dw_wdt->rst) { + set_bit(WDOG_HW_RUNNING, &wdd->status); + return 0; + } + + reset_control_assert(dw_wdt->rst); + reset_control_deassert(dw_wdt->rst); + + return 0; +} + +static int dw_wdt_restart(struct watchdog_device *wdd, + unsigned long action, void *data) +{ + struct dw_wdt *dw_wdt = to_dw_wdt(wdd); + + writel(0, dw_wdt->regs + WDOG_TIMEOUT_RANGE_REG_OFFSET); + if (dw_wdt_is_enabled(dw_wdt)) + writel(WDOG_COUNTER_RESTART_KICK_VALUE, + dw_wdt->regs + WDOG_COUNTER_RESTART_REG_OFFSET); + else + dw_wdt_arm_system_reset(dw_wdt); + + /* wait for reset to assert... */ + mdelay(500); + + return 0; +} + +static unsigned int dw_wdt_get_timeleft(struct watchdog_device *wdd) +{ + struct dw_wdt *dw_wdt = to_dw_wdt(wdd); + + return readl(dw_wdt->regs + WDOG_CURRENT_COUNT_REG_OFFSET) / + dw_wdt->rate; +} + +static const struct watchdog_info dw_wdt_ident = { + .options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT | + WDIOF_MAGICCLOSE, + .identity = "Synopsys DesignWare Watchdog", +}; + +static const struct watchdog_ops dw_wdt_ops = { + .owner = THIS_MODULE, + .start = dw_wdt_start, + .stop = dw_wdt_stop, + .ping = dw_wdt_ping, + .set_timeout = dw_wdt_set_timeout, + .get_timeleft = dw_wdt_get_timeleft, + .restart = dw_wdt_restart, +}; + +#ifdef CONFIG_PM_SLEEP +static int dw_wdt_suspend(struct device *dev) +{ + struct dw_wdt *dw_wdt = dev_get_drvdata(dev); + + dw_wdt->control = readl(dw_wdt->regs + WDOG_CONTROL_REG_OFFSET); + dw_wdt->timeout = readl(dw_wdt->regs + WDOG_TIMEOUT_RANGE_REG_OFFSET); + + clk_disable_unprepare(dw_wdt->clk); + + return 0; +} + +static int dw_wdt_resume(struct device *dev) +{ + struct dw_wdt *dw_wdt = dev_get_drvdata(dev); + int err = clk_prepare_enable(dw_wdt->clk); + + if (err) + return err; + + writel(dw_wdt->timeout, dw_wdt->regs + WDOG_TIMEOUT_RANGE_REG_OFFSET); + writel(dw_wdt->control, dw_wdt->regs + WDOG_CONTROL_REG_OFFSET); + + dw_wdt_ping(&dw_wdt->wdd); + + return 0; +} +#endif /* CONFIG_PM_SLEEP */ + +static SIMPLE_DEV_PM_OPS(dw_wdt_pm_ops, dw_wdt_suspend, dw_wdt_resume); + +static int dw_wdt_drv_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct watchdog_device *wdd; + struct dw_wdt *dw_wdt; + struct resource *mem; + int ret; + + dw_wdt = devm_kzalloc(dev, sizeof(*dw_wdt), GFP_KERNEL); + if (!dw_wdt) + return -ENOMEM; + + mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); + dw_wdt->regs = devm_ioremap_resource(dev, mem); + if (IS_ERR(dw_wdt->regs)) + return PTR_ERR(dw_wdt->regs); + + dw_wdt->clk = devm_clk_get(dev, NULL); + if (IS_ERR(dw_wdt->clk)) + return PTR_ERR(dw_wdt->clk); + + ret = clk_prepare_enable(dw_wdt->clk); + if (ret) + return ret; + + dw_wdt->rate = clk_get_rate(dw_wdt->clk); + if (dw_wdt->rate == 0) { + ret = -EINVAL; + goto out_disable_clk; + } + + dw_wdt->rst = devm_reset_control_get_optional_shared(&pdev->dev, NULL); + if (IS_ERR(dw_wdt->rst)) { + ret = PTR_ERR(dw_wdt->rst); + goto out_disable_clk; + } + + reset_control_deassert(dw_wdt->rst); + + wdd = &dw_wdt->wdd; + wdd->info = &dw_wdt_ident; + wdd->ops = &dw_wdt_ops; + wdd->min_timeout = 1; + wdd->max_hw_heartbeat_ms = + dw_wdt_top_in_seconds(dw_wdt, DW_WDT_MAX_TOP) * 1000; + wdd->parent = dev; + + watchdog_set_drvdata(wdd, dw_wdt); + watchdog_set_nowayout(wdd, nowayout); + watchdog_init_timeout(wdd, 0, dev); + + /* + * If the watchdog is already running, use its already configured + * timeout. Otherwise use the default or the value provided through + * devicetree. + */ + if (dw_wdt_is_enabled(dw_wdt)) { + wdd->timeout = dw_wdt_get_top(dw_wdt); + set_bit(WDOG_HW_RUNNING, &wdd->status); + } else { + wdd->timeout = DW_WDT_DEFAULT_SECONDS; + watchdog_init_timeout(wdd, 0, dev); + } + + platform_set_drvdata(pdev, dw_wdt); + + watchdog_set_restart_priority(wdd, 128); + + ret = watchdog_register_device(wdd); + if (ret) + goto out_disable_clk; + + return 0; + +out_disable_clk: + clk_disable_unprepare(dw_wdt->clk); + return ret; +} + +static int dw_wdt_drv_remove(struct platform_device *pdev) +{ + struct dw_wdt *dw_wdt = platform_get_drvdata(pdev); + + watchdog_unregister_device(&dw_wdt->wdd); + reset_control_assert(dw_wdt->rst); + clk_disable_unprepare(dw_wdt->clk); + + return 0; +} + +#ifdef CONFIG_OF +static const struct of_device_id dw_wdt_of_match[] = { + { .compatible = "snps,dw-wdt", }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, dw_wdt_of_match); +#endif + +static struct platform_driver dw_wdt_driver = { + .probe = dw_wdt_drv_probe, + .remove = dw_wdt_drv_remove, + .driver = { + .name = "dw_wdt", + .of_match_table = of_match_ptr(dw_wdt_of_match), + .pm = &dw_wdt_pm_ops, + }, +}; + +module_platform_driver(dw_wdt_driver); + +MODULE_AUTHOR("Jamie Iles"); +MODULE_DESCRIPTION("Synopsys DesignWare Watchdog Driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/watchdog/ebc-c384_wdt.c b/drivers/watchdog/ebc-c384_wdt.c new file mode 100644 index 000000000..4c4c8ce78 --- /dev/null +++ b/drivers/watchdog/ebc-c384_wdt.c @@ -0,0 +1,154 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Watchdog timer driver for the WinSystems EBC-C384 + * Copyright (C) 2016 William Breathitt Gray + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, version 2, as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + */ +#include <linux/device.h> +#include <linux/dmi.h> +#include <linux/errno.h> +#include <linux/io.h> +#include <linux/ioport.h> +#include <linux/isa.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/types.h> +#include <linux/watchdog.h> + +#define MODULE_NAME "ebc-c384_wdt" +#define WATCHDOG_TIMEOUT 60 +/* + * The timeout value in minutes must fit in a single byte when sent to the + * watchdog timer; the maximum timeout possible is 15300 (255 * 60) seconds. + */ +#define WATCHDOG_MAX_TIMEOUT 15300 +#define BASE_ADDR 0x564 +#define ADDR_EXTENT 5 +#define CFG_ADDR (BASE_ADDR + 1) +#define PET_ADDR (BASE_ADDR + 2) + +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); +MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); + +static unsigned timeout; +module_param(timeout, uint, 0); +MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds (default=" + __MODULE_STRING(WATCHDOG_TIMEOUT) ")"); + +static int ebc_c384_wdt_start(struct watchdog_device *wdev) +{ + unsigned t = wdev->timeout; + + /* resolution is in minutes for timeouts greater than 255 seconds */ + if (t > 255) + t = DIV_ROUND_UP(t, 60); + + outb(t, PET_ADDR); + + return 0; +} + +static int ebc_c384_wdt_stop(struct watchdog_device *wdev) +{ + outb(0x00, PET_ADDR); + + return 0; +} + +static int ebc_c384_wdt_set_timeout(struct watchdog_device *wdev, unsigned t) +{ + /* resolution is in minutes for timeouts greater than 255 seconds */ + if (t > 255) { + /* round second resolution up to minute granularity */ + wdev->timeout = roundup(t, 60); + + /* set watchdog timer for minutes */ + outb(0x00, CFG_ADDR); + } else { + wdev->timeout = t; + + /* set watchdog timer for seconds */ + outb(0x80, CFG_ADDR); + } + + return 0; +} + +static const struct watchdog_ops ebc_c384_wdt_ops = { + .start = ebc_c384_wdt_start, + .stop = ebc_c384_wdt_stop, + .set_timeout = ebc_c384_wdt_set_timeout +}; + +static const struct watchdog_info ebc_c384_wdt_info = { + .options = WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE | WDIOF_SETTIMEOUT, + .identity = MODULE_NAME +}; + +static int ebc_c384_wdt_probe(struct device *dev, unsigned int id) +{ + struct watchdog_device *wdd; + + if (!devm_request_region(dev, BASE_ADDR, ADDR_EXTENT, dev_name(dev))) { + dev_err(dev, "Unable to lock port addresses (0x%X-0x%X)\n", + BASE_ADDR, BASE_ADDR + ADDR_EXTENT); + return -EBUSY; + } + + wdd = devm_kzalloc(dev, sizeof(*wdd), GFP_KERNEL); + if (!wdd) + return -ENOMEM; + + wdd->info = &ebc_c384_wdt_info; + wdd->ops = &ebc_c384_wdt_ops; + wdd->timeout = WATCHDOG_TIMEOUT; + wdd->min_timeout = 1; + wdd->max_timeout = WATCHDOG_MAX_TIMEOUT; + + watchdog_set_nowayout(wdd, nowayout); + + if (watchdog_init_timeout(wdd, timeout, dev)) + dev_warn(dev, "Invalid timeout (%u seconds), using default (%u seconds)\n", + timeout, WATCHDOG_TIMEOUT); + + return devm_watchdog_register_device(dev, wdd); +} + +static struct isa_driver ebc_c384_wdt_driver = { + .probe = ebc_c384_wdt_probe, + .driver = { + .name = MODULE_NAME + }, +}; + +static int __init ebc_c384_wdt_init(void) +{ + if (!dmi_match(DMI_BOARD_NAME, "EBC-C384 SBC")) + return -ENODEV; + + return isa_register_driver(&ebc_c384_wdt_driver, 1); +} + +static void __exit ebc_c384_wdt_exit(void) +{ + isa_unregister_driver(&ebc_c384_wdt_driver); +} + +module_init(ebc_c384_wdt_init); +module_exit(ebc_c384_wdt_exit); + +MODULE_AUTHOR("William Breathitt Gray <vilhelm.gray@gmail.com>"); +MODULE_DESCRIPTION("WinSystems EBC-C384 watchdog timer driver"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("isa:" MODULE_NAME); diff --git a/drivers/watchdog/ep93xx_wdt.c b/drivers/watchdog/ep93xx_wdt.c new file mode 100644 index 000000000..f9b14e6ef --- /dev/null +++ b/drivers/watchdog/ep93xx_wdt.c @@ -0,0 +1,147 @@ +/* + * Watchdog driver for Cirrus Logic EP93xx family of devices. + * + * Copyright (c) 2004 Ray Lehtiniemi + * Copyright (c) 2006 Tower Technologies + * Based on ep93xx driver, bits from alim7101_wdt.c + * + * Authors: Ray Lehtiniemi <rayl@mail.com>, + * Alessandro Zummo <a.zummo@towertech.it> + * + * Copyright (c) 2012 H Hartley Sweeten <hsweeten@visionengravers.com> + * Convert to a platform device and use the watchdog framework API + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + * + * This watchdog fires after 250msec, which is a too short interval + * for us to rely on the user space daemon alone. So we ping the + * wdt each ~200msec and eventually stop doing it if the user space + * daemon dies. + */ + +#include <linux/platform_device.h> +#include <linux/module.h> +#include <linux/watchdog.h> +#include <linux/io.h> + +/* default timeout (secs) */ +#define WDT_TIMEOUT 30 + +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); +MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started"); + +static unsigned int timeout; +module_param(timeout, uint, 0); +MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds."); + +#define EP93XX_WATCHDOG 0x00 +#define EP93XX_WDSTATUS 0x04 + +struct ep93xx_wdt_priv { + void __iomem *mmio; + struct watchdog_device wdd; +}; + +static int ep93xx_wdt_start(struct watchdog_device *wdd) +{ + struct ep93xx_wdt_priv *priv = watchdog_get_drvdata(wdd); + + writel(0xaaaa, priv->mmio + EP93XX_WATCHDOG); + + return 0; +} + +static int ep93xx_wdt_stop(struct watchdog_device *wdd) +{ + struct ep93xx_wdt_priv *priv = watchdog_get_drvdata(wdd); + + writel(0xaa55, priv->mmio + EP93XX_WATCHDOG); + + return 0; +} + +static int ep93xx_wdt_ping(struct watchdog_device *wdd) +{ + struct ep93xx_wdt_priv *priv = watchdog_get_drvdata(wdd); + + writel(0x5555, priv->mmio + EP93XX_WATCHDOG); + + return 0; +} + +static const struct watchdog_info ep93xx_wdt_ident = { + .options = WDIOF_CARDRESET | + WDIOF_SETTIMEOUT | + WDIOF_MAGICCLOSE | + WDIOF_KEEPALIVEPING, + .identity = "EP93xx Watchdog", +}; + +static const struct watchdog_ops ep93xx_wdt_ops = { + .owner = THIS_MODULE, + .start = ep93xx_wdt_start, + .stop = ep93xx_wdt_stop, + .ping = ep93xx_wdt_ping, +}; + +static int ep93xx_wdt_probe(struct platform_device *pdev) +{ + struct ep93xx_wdt_priv *priv; + struct watchdog_device *wdd; + struct resource *res; + unsigned long val; + int ret; + + priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + priv->mmio = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(priv->mmio)) + return PTR_ERR(priv->mmio); + + val = readl(priv->mmio + EP93XX_WATCHDOG); + + wdd = &priv->wdd; + wdd->bootstatus = (val & 0x01) ? WDIOF_CARDRESET : 0; + wdd->info = &ep93xx_wdt_ident; + wdd->ops = &ep93xx_wdt_ops; + wdd->min_timeout = 1; + wdd->max_hw_heartbeat_ms = 200; + wdd->parent = &pdev->dev; + + watchdog_set_nowayout(wdd, nowayout); + + wdd->timeout = WDT_TIMEOUT; + watchdog_init_timeout(wdd, timeout, &pdev->dev); + + watchdog_set_drvdata(wdd, priv); + + ret = devm_watchdog_register_device(&pdev->dev, wdd); + if (ret) + return ret; + + dev_info(&pdev->dev, "EP93XX watchdog driver %s\n", + (val & 0x08) ? " (nCS1 disable detected)" : ""); + + return 0; +} + +static struct platform_driver ep93xx_wdt_driver = { + .driver = { + .name = "ep93xx-wdt", + }, + .probe = ep93xx_wdt_probe, +}; + +module_platform_driver(ep93xx_wdt_driver); + +MODULE_AUTHOR("Ray Lehtiniemi <rayl@mail.com>"); +MODULE_AUTHOR("Alessandro Zummo <a.zummo@towertech.it>"); +MODULE_AUTHOR("H Hartley Sweeten <hsweeten@visionengravers.com>"); +MODULE_DESCRIPTION("EP93xx Watchdog"); +MODULE_LICENSE("GPL"); diff --git a/drivers/watchdog/eurotechwdt.c b/drivers/watchdog/eurotechwdt.c new file mode 100644 index 000000000..47f77a6fd --- /dev/null +++ b/drivers/watchdog/eurotechwdt.c @@ -0,0 +1,479 @@ +/* + * Eurotech CPU-1220/1410/1420 on board WDT driver + * + * (c) Copyright 2001 Ascensit <support@ascensit.com> + * (c) Copyright 2001 Rodolfo Giometti <giometti@ascensit.com> + * (c) Copyright 2002 Rob Radez <rob@osinvestor.com> + * + * Based on wdt.c. + * Original copyright messages: + * + * (c) Copyright 1996-1997 Alan Cox <alan@lxorguk.ukuu.org.uk>, + * All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * Neither Alan Cox nor CymruNet Ltd. admit liability nor provide + * warranty for any of this software. This material is provided + * "AS-IS" and at no charge. + * + * (c) Copyright 1995 Alan Cox <alan@lxorguk.ukuu.org.uk>* + */ + +/* Changelog: + * + * 2001 - Rodolfo Giometti + * Initial release + * + * 2002/04/25 - Rob Radez + * clean up #includes + * clean up locking + * make __setup param unique + * proper options in watchdog_info + * add WDIOC_GETSTATUS and WDIOC_SETOPTIONS ioctls + * add expect_close support + * + * 2002.05.30 - Joel Becker <joel.becker@oracle.com> + * Added Matt Domsch's nowayout module option. + */ + +/* + * The eurotech CPU-1220/1410/1420's watchdog is a part + * of the on-board SUPER I/O device SMSC FDC 37B782. + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/interrupt.h> +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/types.h> +#include <linux/miscdevice.h> +#include <linux/watchdog.h> +#include <linux/fs.h> +#include <linux/ioport.h> +#include <linux/notifier.h> +#include <linux/reboot.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/uaccess.h> + + +static unsigned long eurwdt_is_open; +static int eurwdt_timeout; +static char eur_expect_close; +static DEFINE_SPINLOCK(eurwdt_lock); + +/* + * You must set these - there is no sane way to probe for this board. + */ + +static int io = 0x3f0; +static int irq = 10; +static char *ev = "int"; + +#define WDT_TIMEOUT 60 /* 1 minute */ + +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); +MODULE_PARM_DESC(nowayout, + "Watchdog cannot be stopped once started (default=" + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); + +/* + * Some symbolic names + */ + +#define WDT_CTRL_REG 0x30 +#define WDT_OUTPIN_CFG 0xe2 +#define WDT_EVENT_INT 0x00 +#define WDT_EVENT_REBOOT 0x08 +#define WDT_UNIT_SEL 0xf1 +#define WDT_UNIT_SECS 0x80 +#define WDT_TIMEOUT_VAL 0xf2 +#define WDT_TIMER_CFG 0xf3 + + +module_param_hw(io, int, ioport, 0); +MODULE_PARM_DESC(io, "Eurotech WDT io port (default=0x3f0)"); +module_param_hw(irq, int, irq, 0); +MODULE_PARM_DESC(irq, "Eurotech WDT irq (default=10)"); +module_param(ev, charp, 0); +MODULE_PARM_DESC(ev, "Eurotech WDT event type (default is `int')"); + + +/* + * Programming support + */ + +static inline void eurwdt_write_reg(u8 index, u8 data) +{ + outb(index, io); + outb(data, io+1); +} + +static inline void eurwdt_lock_chip(void) +{ + outb(0xaa, io); +} + +static inline void eurwdt_unlock_chip(void) +{ + outb(0x55, io); + eurwdt_write_reg(0x07, 0x08); /* set the logical device */ +} + +static inline void eurwdt_set_timeout(int timeout) +{ + eurwdt_write_reg(WDT_TIMEOUT_VAL, (u8) timeout); +} + +static inline void eurwdt_disable_timer(void) +{ + eurwdt_set_timeout(0); +} + +static void eurwdt_activate_timer(void) +{ + eurwdt_disable_timer(); + eurwdt_write_reg(WDT_CTRL_REG, 0x01); /* activate the WDT */ + eurwdt_write_reg(WDT_OUTPIN_CFG, + !strcmp("int", ev) ? WDT_EVENT_INT : WDT_EVENT_REBOOT); + + /* Setting interrupt line */ + if (irq == 2 || irq > 15 || irq < 0) { + pr_err("invalid irq number\n"); + irq = 0; /* if invalid we disable interrupt */ + } + if (irq == 0) + pr_info("interrupt disabled\n"); + + eurwdt_write_reg(WDT_TIMER_CFG, irq << 4); + + eurwdt_write_reg(WDT_UNIT_SEL, WDT_UNIT_SECS); /* we use seconds */ + eurwdt_set_timeout(0); /* the default timeout */ +} + + +/* + * Kernel methods. + */ + +static irqreturn_t eurwdt_interrupt(int irq, void *dev_id) +{ + pr_crit("timeout WDT timeout\n"); + +#ifdef ONLY_TESTING + pr_crit("Would Reboot\n"); +#else + pr_crit("Initiating system reboot\n"); + emergency_restart(); +#endif + return IRQ_HANDLED; +} + + +/** + * eurwdt_ping: + * + * Reload counter one with the watchdog timeout. + */ + +static void eurwdt_ping(void) +{ + /* Write the watchdog default value */ + eurwdt_set_timeout(eurwdt_timeout); +} + +/** + * eurwdt_write: + * @file: file handle to the watchdog + * @buf: buffer to write (unused as data does not matter here + * @count: count of bytes + * @ppos: pointer to the position to write. No seeks allowed + * + * A write to a watchdog device is defined as a keepalive signal. Any + * write of data will do, as we we don't define content meaning. + */ + +static ssize_t eurwdt_write(struct file *file, const char __user *buf, +size_t count, loff_t *ppos) +{ + if (count) { + if (!nowayout) { + size_t i; + + eur_expect_close = 0; + + for (i = 0; i != count; i++) { + char c; + if (get_user(c, buf + i)) + return -EFAULT; + if (c == 'V') + eur_expect_close = 42; + } + } + spin_lock(&eurwdt_lock); + eurwdt_ping(); /* the default timeout */ + spin_unlock(&eurwdt_lock); + } + return count; +} + +/** + * eurwdt_ioctl: + * @file: file handle to the device + * @cmd: watchdog command + * @arg: argument pointer + * + * The watchdog API defines a common set of functions for all watchdogs + * according to their available features. + */ + +static long eurwdt_ioctl(struct file *file, + unsigned int cmd, unsigned long arg) +{ + void __user *argp = (void __user *)arg; + int __user *p = argp; + static const struct watchdog_info ident = { + .options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT + | WDIOF_MAGICCLOSE, + .firmware_version = 1, + .identity = "WDT Eurotech CPU-1220/1410", + }; + + int time; + int options, retval = -EINVAL; + + switch (cmd) { + case WDIOC_GETSUPPORT: + return copy_to_user(argp, &ident, sizeof(ident)) ? -EFAULT : 0; + + case WDIOC_GETSTATUS: + case WDIOC_GETBOOTSTATUS: + return put_user(0, p); + + case WDIOC_SETOPTIONS: + if (get_user(options, p)) + return -EFAULT; + spin_lock(&eurwdt_lock); + if (options & WDIOS_DISABLECARD) { + eurwdt_disable_timer(); + retval = 0; + } + if (options & WDIOS_ENABLECARD) { + eurwdt_activate_timer(); + eurwdt_ping(); + retval = 0; + } + spin_unlock(&eurwdt_lock); + return retval; + + case WDIOC_KEEPALIVE: + spin_lock(&eurwdt_lock); + eurwdt_ping(); + spin_unlock(&eurwdt_lock); + return 0; + + case WDIOC_SETTIMEOUT: + if (copy_from_user(&time, p, sizeof(int))) + return -EFAULT; + + /* Sanity check */ + if (time < 0 || time > 255) + return -EINVAL; + + spin_lock(&eurwdt_lock); + eurwdt_timeout = time; + eurwdt_set_timeout(time); + spin_unlock(&eurwdt_lock); + /* fall through */ + + case WDIOC_GETTIMEOUT: + return put_user(eurwdt_timeout, p); + + default: + return -ENOTTY; + } +} + +/** + * eurwdt_open: + * @inode: inode of device + * @file: file handle to device + * + * The misc device has been opened. The watchdog device is single + * open and on opening we load the counter. + */ + +static int eurwdt_open(struct inode *inode, struct file *file) +{ + if (test_and_set_bit(0, &eurwdt_is_open)) + return -EBUSY; + eurwdt_timeout = WDT_TIMEOUT; /* initial timeout */ + /* Activate the WDT */ + eurwdt_activate_timer(); + return nonseekable_open(inode, file); +} + +/** + * eurwdt_release: + * @inode: inode to board + * @file: file handle to board + * + * The watchdog has a configurable API. There is a religious dispute + * between people who want their watchdog to be able to shut down and + * those who want to be sure if the watchdog manager dies the machine + * reboots. In the former case we disable the counters, in the latter + * case you have to open it again very soon. + */ + +static int eurwdt_release(struct inode *inode, struct file *file) +{ + if (eur_expect_close == 42) + eurwdt_disable_timer(); + else { + pr_crit("Unexpected close, not stopping watchdog!\n"); + eurwdt_ping(); + } + clear_bit(0, &eurwdt_is_open); + eur_expect_close = 0; + return 0; +} + +/** + * eurwdt_notify_sys: + * @this: our notifier block + * @code: the event being reported + * @unused: unused + * + * Our notifier is called on system shutdowns. We want to turn the card + * off at reboot otherwise the machine will reboot again during memory + * test or worse yet during the following fsck. This would suck, in fact + * trust me - if it happens it does suck. + */ + +static int eurwdt_notify_sys(struct notifier_block *this, unsigned long code, + void *unused) +{ + if (code == SYS_DOWN || code == SYS_HALT) + eurwdt_disable_timer(); /* Turn the card off */ + + return NOTIFY_DONE; +} + +/* + * Kernel Interfaces + */ + + +static const struct file_operations eurwdt_fops = { + .owner = THIS_MODULE, + .llseek = no_llseek, + .write = eurwdt_write, + .unlocked_ioctl = eurwdt_ioctl, + .open = eurwdt_open, + .release = eurwdt_release, +}; + +static struct miscdevice eurwdt_miscdev = { + .minor = WATCHDOG_MINOR, + .name = "watchdog", + .fops = &eurwdt_fops, +}; + +/* + * The WDT card needs to learn about soft shutdowns in order to + * turn the timebomb registers off. + */ + +static struct notifier_block eurwdt_notifier = { + .notifier_call = eurwdt_notify_sys, +}; + +/** + * cleanup_module: + * + * Unload the watchdog. You cannot do this with any file handles open. + * If your watchdog is set to continue ticking on close and you unload + * it, well it keeps ticking. We won't get the interrupt but the board + * will not touch PC memory so all is fine. You just have to load a new + * module in 60 seconds or reboot. + */ + +static void __exit eurwdt_exit(void) +{ + eurwdt_lock_chip(); + + misc_deregister(&eurwdt_miscdev); + + unregister_reboot_notifier(&eurwdt_notifier); + release_region(io, 2); + free_irq(irq, NULL); +} + +/** + * eurwdt_init: + * + * Set up the WDT watchdog board. After grabbing the resources + * we require we need also to unlock the device. + * The open() function will actually kick the board off. + */ + +static int __init eurwdt_init(void) +{ + int ret; + + ret = request_irq(irq, eurwdt_interrupt, 0, "eurwdt", NULL); + if (ret) { + pr_err("IRQ %d is not free\n", irq); + goto out; + } + + if (!request_region(io, 2, "eurwdt")) { + pr_err("IO %X is not free\n", io); + ret = -EBUSY; + goto outirq; + } + + ret = register_reboot_notifier(&eurwdt_notifier); + if (ret) { + pr_err("can't register reboot notifier (err=%d)\n", ret); + goto outreg; + } + + ret = misc_register(&eurwdt_miscdev); + if (ret) { + pr_err("can't misc_register on minor=%d\n", WATCHDOG_MINOR); + goto outreboot; + } + + eurwdt_unlock_chip(); + + ret = 0; + pr_info("Eurotech WDT driver 0.01 at %X (Interrupt %d) - timeout event: %s\n", + io, irq, (!strcmp("int", ev) ? "int" : "reboot")); + +out: + return ret; + +outreboot: + unregister_reboot_notifier(&eurwdt_notifier); + +outreg: + release_region(io, 2); + +outirq: + free_irq(irq, NULL); + goto out; +} + +module_init(eurwdt_init); +module_exit(eurwdt_exit); + +MODULE_AUTHOR("Rodolfo Giometti"); +MODULE_DESCRIPTION("Driver for Eurotech CPU-1220/1410 on board watchdog"); +MODULE_LICENSE("GPL"); diff --git a/drivers/watchdog/f71808e_wdt.c b/drivers/watchdog/f71808e_wdt.c new file mode 100644 index 000000000..6b751d1aa --- /dev/null +++ b/drivers/watchdog/f71808e_wdt.c @@ -0,0 +1,885 @@ +/*************************************************************************** + * Copyright (C) 2006 by Hans Edgington <hans@edgington.nl> * + * Copyright (C) 2007-2009 Hans de Goede <hdegoede@redhat.com> * + * Copyright (C) 2010 Giel van Schijndel <me@mortis.eu> * + * * + * This program is free software; you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation; either version 2 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * You should have received a copy of the GNU General Public License * + * along with this program; if not, write to the * + * Free Software Foundation, Inc., * + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * + ***************************************************************************/ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/err.h> +#include <linux/fs.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/ioport.h> +#include <linux/miscdevice.h> +#include <linux/module.h> +#include <linux/mutex.h> +#include <linux/notifier.h> +#include <linux/reboot.h> +#include <linux/uaccess.h> +#include <linux/watchdog.h> + +#define DRVNAME "f71808e_wdt" + +#define SIO_F71808FG_LD_WDT 0x07 /* Watchdog timer logical device */ +#define SIO_UNLOCK_KEY 0x87 /* Key to enable Super-I/O */ +#define SIO_LOCK_KEY 0xAA /* Key to disable Super-I/O */ + +#define SIO_REG_LDSEL 0x07 /* Logical device select */ +#define SIO_REG_DEVID 0x20 /* Device ID (2 bytes) */ +#define SIO_REG_DEVREV 0x22 /* Device revision */ +#define SIO_REG_MANID 0x23 /* Fintek ID (2 bytes) */ +#define SIO_REG_ROM_ADDR_SEL 0x27 /* ROM address select */ +#define SIO_F81866_REG_PORT_SEL 0x27 /* F81866 Multi-Function Register */ +#define SIO_REG_MFUNCT1 0x29 /* Multi function select 1 */ +#define SIO_REG_MFUNCT2 0x2a /* Multi function select 2 */ +#define SIO_REG_MFUNCT3 0x2b /* Multi function select 3 */ +#define SIO_F81866_REG_GPIO1 0x2c /* F81866 GPIO1 Enable Register */ +#define SIO_REG_ENABLE 0x30 /* Logical device enable */ +#define SIO_REG_ADDR 0x60 /* Logical device address (2 bytes) */ + +#define SIO_FINTEK_ID 0x1934 /* Manufacturers ID */ +#define SIO_F71808_ID 0x0901 /* Chipset ID */ +#define SIO_F71858_ID 0x0507 /* Chipset ID */ +#define SIO_F71862_ID 0x0601 /* Chipset ID */ +#define SIO_F71868_ID 0x1106 /* Chipset ID */ +#define SIO_F71869_ID 0x0814 /* Chipset ID */ +#define SIO_F71869A_ID 0x1007 /* Chipset ID */ +#define SIO_F71882_ID 0x0541 /* Chipset ID */ +#define SIO_F71889_ID 0x0723 /* Chipset ID */ +#define SIO_F81865_ID 0x0704 /* Chipset ID */ +#define SIO_F81866_ID 0x1010 /* Chipset ID */ + +#define F71808FG_REG_WDO_CONF 0xf0 +#define F71808FG_REG_WDT_CONF 0xf5 +#define F71808FG_REG_WD_TIME 0xf6 + +#define F71808FG_FLAG_WDOUT_EN 7 + +#define F71808FG_FLAG_WDTMOUT_STS 6 +#define F71808FG_FLAG_WD_EN 5 +#define F71808FG_FLAG_WD_PULSE 4 +#define F71808FG_FLAG_WD_UNIT 3 + +#define F81865_REG_WDO_CONF 0xfa +#define F81865_FLAG_WDOUT_EN 0 + +/* Default values */ +#define WATCHDOG_TIMEOUT 60 /* 1 minute default timeout */ +#define WATCHDOG_MAX_TIMEOUT (60 * 255) +#define WATCHDOG_PULSE_WIDTH 125 /* 125 ms, default pulse width for + watchdog signal */ +#define WATCHDOG_F71862FG_PIN 63 /* default watchdog reset output + pin number 63 */ + +static unsigned short force_id; +module_param(force_id, ushort, 0); +MODULE_PARM_DESC(force_id, "Override the detected device ID"); + +static const int max_timeout = WATCHDOG_MAX_TIMEOUT; +static int timeout = WATCHDOG_TIMEOUT; /* default timeout in seconds */ +module_param(timeout, int, 0); +MODULE_PARM_DESC(timeout, + "Watchdog timeout in seconds. 1<= timeout <=" + __MODULE_STRING(WATCHDOG_MAX_TIMEOUT) " (default=" + __MODULE_STRING(WATCHDOG_TIMEOUT) ")"); + +static unsigned int pulse_width = WATCHDOG_PULSE_WIDTH; +module_param(pulse_width, uint, 0); +MODULE_PARM_DESC(pulse_width, + "Watchdog signal pulse width. 0(=level), 1, 25, 30, 125, 150, 5000 or 6000 ms" + " (default=" __MODULE_STRING(WATCHDOG_PULSE_WIDTH) ")"); + +static unsigned int f71862fg_pin = WATCHDOG_F71862FG_PIN; +module_param(f71862fg_pin, uint, 0); +MODULE_PARM_DESC(f71862fg_pin, + "Watchdog f71862fg reset output pin configuration. Choose pin 56 or 63" + " (default=" __MODULE_STRING(WATCHDOG_F71862FG_PIN)")"); + +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0444); +MODULE_PARM_DESC(nowayout, "Disable watchdog shutdown on close"); + +static unsigned int start_withtimeout; +module_param(start_withtimeout, uint, 0); +MODULE_PARM_DESC(start_withtimeout, "Start watchdog timer on module load with" + " given initial timeout. Zero (default) disables this feature."); + +enum chips { f71808fg, f71858fg, f71862fg, f71868, f71869, f71882fg, f71889fg, + f81865, f81866}; + +static const char *f71808e_names[] = { + "f71808fg", + "f71858fg", + "f71862fg", + "f71868", + "f71869", + "f71882fg", + "f71889fg", + "f81865", + "f81866", +}; + +/* Super-I/O Function prototypes */ +static inline int superio_inb(int base, int reg); +static inline int superio_inw(int base, int reg); +static inline void superio_outb(int base, int reg, u8 val); +static inline void superio_set_bit(int base, int reg, int bit); +static inline void superio_clear_bit(int base, int reg, int bit); +static inline int superio_enter(int base); +static inline void superio_select(int base, int ld); +static inline void superio_exit(int base); + +struct watchdog_data { + unsigned short sioaddr; + enum chips type; + unsigned long opened; + struct mutex lock; + char expect_close; + struct watchdog_info ident; + + unsigned short timeout; + u8 timer_val; /* content for the wd_time register */ + char minutes_mode; + u8 pulse_val; /* pulse width flag */ + char pulse_mode; /* enable pulse output mode? */ + char caused_reboot; /* last reboot was by the watchdog */ +}; + +static struct watchdog_data watchdog = { + .lock = __MUTEX_INITIALIZER(watchdog.lock), +}; + +/* Super I/O functions */ +static inline int superio_inb(int base, int reg) +{ + outb(reg, base); + return inb(base + 1); +} + +static int superio_inw(int base, int reg) +{ + int val; + val = superio_inb(base, reg) << 8; + val |= superio_inb(base, reg + 1); + return val; +} + +static inline void superio_outb(int base, int reg, u8 val) +{ + outb(reg, base); + outb(val, base + 1); +} + +static inline void superio_set_bit(int base, int reg, int bit) +{ + unsigned long val = superio_inb(base, reg); + __set_bit(bit, &val); + superio_outb(base, reg, val); +} + +static inline void superio_clear_bit(int base, int reg, int bit) +{ + unsigned long val = superio_inb(base, reg); + __clear_bit(bit, &val); + superio_outb(base, reg, val); +} + +static inline int superio_enter(int base) +{ + /* Don't step on other drivers' I/O space by accident */ + if (!request_muxed_region(base, 2, DRVNAME)) { + pr_err("I/O address 0x%04x already in use\n", (int)base); + return -EBUSY; + } + + /* according to the datasheet the key must be sent twice! */ + outb(SIO_UNLOCK_KEY, base); + outb(SIO_UNLOCK_KEY, base); + + return 0; +} + +static inline void superio_select(int base, int ld) +{ + outb(SIO_REG_LDSEL, base); + outb(ld, base + 1); +} + +static inline void superio_exit(int base) +{ + outb(SIO_LOCK_KEY, base); + release_region(base, 2); +} + +static int watchdog_set_timeout(int timeout) +{ + if (timeout <= 0 + || timeout > max_timeout) { + pr_err("watchdog timeout out of range\n"); + return -EINVAL; + } + + mutex_lock(&watchdog.lock); + + if (timeout > 0xff) { + watchdog.timer_val = DIV_ROUND_UP(timeout, 60); + watchdog.minutes_mode = true; + timeout = watchdog.timer_val * 60; + } else { + watchdog.timer_val = timeout; + watchdog.minutes_mode = false; + } + + watchdog.timeout = timeout; + + mutex_unlock(&watchdog.lock); + + return 0; +} + +static int watchdog_set_pulse_width(unsigned int pw) +{ + int err = 0; + unsigned int t1 = 25, t2 = 125, t3 = 5000; + + if (watchdog.type == f71868) { + t1 = 30; + t2 = 150; + t3 = 6000; + } + + mutex_lock(&watchdog.lock); + + if (pw <= 1) { + watchdog.pulse_val = 0; + } else if (pw <= t1) { + watchdog.pulse_val = 1; + } else if (pw <= t2) { + watchdog.pulse_val = 2; + } else if (pw <= t3) { + watchdog.pulse_val = 3; + } else { + pr_err("pulse width out of range\n"); + err = -EINVAL; + goto exit_unlock; + } + + watchdog.pulse_mode = pw; + +exit_unlock: + mutex_unlock(&watchdog.lock); + return err; +} + +static int watchdog_keepalive(void) +{ + int err = 0; + + mutex_lock(&watchdog.lock); + err = superio_enter(watchdog.sioaddr); + if (err) + goto exit_unlock; + superio_select(watchdog.sioaddr, SIO_F71808FG_LD_WDT); + + if (watchdog.minutes_mode) + /* select minutes for timer units */ + superio_set_bit(watchdog.sioaddr, F71808FG_REG_WDT_CONF, + F71808FG_FLAG_WD_UNIT); + else + /* select seconds for timer units */ + superio_clear_bit(watchdog.sioaddr, F71808FG_REG_WDT_CONF, + F71808FG_FLAG_WD_UNIT); + + /* Set timer value */ + superio_outb(watchdog.sioaddr, F71808FG_REG_WD_TIME, + watchdog.timer_val); + + superio_exit(watchdog.sioaddr); + +exit_unlock: + mutex_unlock(&watchdog.lock); + return err; +} + +static int f71862fg_pin_configure(unsigned short ioaddr) +{ + /* When ioaddr is non-zero the calling function has to take care of + mutex handling and superio preparation! */ + + if (f71862fg_pin == 63) { + if (ioaddr) { + /* SPI must be disabled first to use this pin! */ + superio_clear_bit(ioaddr, SIO_REG_ROM_ADDR_SEL, 6); + superio_set_bit(ioaddr, SIO_REG_MFUNCT3, 4); + } + } else if (f71862fg_pin == 56) { + if (ioaddr) + superio_set_bit(ioaddr, SIO_REG_MFUNCT1, 1); + } else { + pr_err("Invalid argument f71862fg_pin=%d\n", f71862fg_pin); + return -EINVAL; + } + return 0; +} + +static int watchdog_start(void) +{ + /* Make sure we don't die as soon as the watchdog is enabled below */ + int err = watchdog_keepalive(); + if (err) + return err; + + mutex_lock(&watchdog.lock); + err = superio_enter(watchdog.sioaddr); + if (err) + goto exit_unlock; + superio_select(watchdog.sioaddr, SIO_F71808FG_LD_WDT); + + /* Watchdog pin configuration */ + switch (watchdog.type) { + case f71808fg: + /* Set pin 21 to GPIO23/WDTRST#, then to WDTRST# */ + superio_clear_bit(watchdog.sioaddr, SIO_REG_MFUNCT2, 3); + superio_clear_bit(watchdog.sioaddr, SIO_REG_MFUNCT3, 3); + break; + + case f71862fg: + err = f71862fg_pin_configure(watchdog.sioaddr); + if (err) + goto exit_superio; + break; + + case f71868: + case f71869: + /* GPIO14 --> WDTRST# */ + superio_clear_bit(watchdog.sioaddr, SIO_REG_MFUNCT1, 4); + break; + + case f71882fg: + /* Set pin 56 to WDTRST# */ + superio_set_bit(watchdog.sioaddr, SIO_REG_MFUNCT1, 1); + break; + + case f71889fg: + /* set pin 40 to WDTRST# */ + superio_outb(watchdog.sioaddr, SIO_REG_MFUNCT3, + superio_inb(watchdog.sioaddr, SIO_REG_MFUNCT3) & 0xcf); + break; + + case f81865: + /* Set pin 70 to WDTRST# */ + superio_clear_bit(watchdog.sioaddr, SIO_REG_MFUNCT3, 5); + break; + + case f81866: + /* Set pin 70 to WDTRST# */ + superio_clear_bit(watchdog.sioaddr, SIO_F81866_REG_PORT_SEL, + BIT(3) | BIT(0)); + superio_set_bit(watchdog.sioaddr, SIO_F81866_REG_PORT_SEL, + BIT(2)); + /* + * GPIO1 Control Register when 27h BIT3:2 = 01 & BIT0 = 0. + * The PIN 70(GPIO15/WDTRST) is controlled by 2Ch: + * BIT5: 0 -> WDTRST# + * 1 -> GPIO15 + */ + superio_clear_bit(watchdog.sioaddr, SIO_F81866_REG_GPIO1, + BIT(5)); + break; + + default: + /* + * 'default' label to shut up the compiler and catch + * programmer errors + */ + err = -ENODEV; + goto exit_superio; + } + + superio_select(watchdog.sioaddr, SIO_F71808FG_LD_WDT); + superio_set_bit(watchdog.sioaddr, SIO_REG_ENABLE, 0); + + if (watchdog.type == f81865 || watchdog.type == f81866) + superio_set_bit(watchdog.sioaddr, F81865_REG_WDO_CONF, + F81865_FLAG_WDOUT_EN); + else + superio_set_bit(watchdog.sioaddr, F71808FG_REG_WDO_CONF, + F71808FG_FLAG_WDOUT_EN); + + superio_set_bit(watchdog.sioaddr, F71808FG_REG_WDT_CONF, + F71808FG_FLAG_WD_EN); + + if (watchdog.pulse_mode) { + /* Select "pulse" output mode with given duration */ + u8 wdt_conf = superio_inb(watchdog.sioaddr, + F71808FG_REG_WDT_CONF); + + /* Set WD_PSWIDTH bits (1:0) */ + wdt_conf = (wdt_conf & 0xfc) | (watchdog.pulse_val & 0x03); + /* Set WD_PULSE to "pulse" mode */ + wdt_conf |= BIT(F71808FG_FLAG_WD_PULSE); + + superio_outb(watchdog.sioaddr, F71808FG_REG_WDT_CONF, + wdt_conf); + } else { + /* Select "level" output mode */ + superio_clear_bit(watchdog.sioaddr, F71808FG_REG_WDT_CONF, + F71808FG_FLAG_WD_PULSE); + } + +exit_superio: + superio_exit(watchdog.sioaddr); +exit_unlock: + mutex_unlock(&watchdog.lock); + + return err; +} + +static int watchdog_stop(void) +{ + int err = 0; + + mutex_lock(&watchdog.lock); + err = superio_enter(watchdog.sioaddr); + if (err) + goto exit_unlock; + superio_select(watchdog.sioaddr, SIO_F71808FG_LD_WDT); + + superio_clear_bit(watchdog.sioaddr, F71808FG_REG_WDT_CONF, + F71808FG_FLAG_WD_EN); + + superio_exit(watchdog.sioaddr); + +exit_unlock: + mutex_unlock(&watchdog.lock); + + return err; +} + +static int watchdog_get_status(void) +{ + int status = 0; + + mutex_lock(&watchdog.lock); + status = (watchdog.caused_reboot) ? WDIOF_CARDRESET : 0; + mutex_unlock(&watchdog.lock); + + return status; +} + +static bool watchdog_is_running(void) +{ + /* + * if we fail to determine the watchdog's status assume it to be + * running to be on the safe side + */ + bool is_running = true; + + mutex_lock(&watchdog.lock); + if (superio_enter(watchdog.sioaddr)) + goto exit_unlock; + superio_select(watchdog.sioaddr, SIO_F71808FG_LD_WDT); + + is_running = (superio_inb(watchdog.sioaddr, SIO_REG_ENABLE) & BIT(0)) + && (superio_inb(watchdog.sioaddr, F71808FG_REG_WDT_CONF) + & BIT(F71808FG_FLAG_WD_EN)); + + superio_exit(watchdog.sioaddr); + +exit_unlock: + mutex_unlock(&watchdog.lock); + return is_running; +} + +/* /dev/watchdog api */ + +static int watchdog_open(struct inode *inode, struct file *file) +{ + int err; + + /* If the watchdog is alive we don't need to start it again */ + if (test_and_set_bit(0, &watchdog.opened)) + return -EBUSY; + + err = watchdog_start(); + if (err) { + clear_bit(0, &watchdog.opened); + return err; + } + + if (nowayout) + __module_get(THIS_MODULE); + + watchdog.expect_close = 0; + return nonseekable_open(inode, file); +} + +static int watchdog_release(struct inode *inode, struct file *file) +{ + clear_bit(0, &watchdog.opened); + + if (!watchdog.expect_close) { + watchdog_keepalive(); + pr_crit("Unexpected close, not stopping watchdog!\n"); + } else if (!nowayout) { + watchdog_stop(); + } + return 0; +} + +/* + * watchdog_write: + * @file: file handle to the watchdog + * @buf: buffer to write + * @count: count of bytes + * @ppos: pointer to the position to write. No seeks allowed + * + * A write to a watchdog device is defined as a keepalive signal. Any + * write of data will do, as we we don't define content meaning. + */ + +static ssize_t watchdog_write(struct file *file, const char __user *buf, + size_t count, loff_t *ppos) +{ + if (count) { + if (!nowayout) { + size_t i; + + /* In case it was set long ago */ + bool expect_close = false; + + for (i = 0; i != count; i++) { + char c; + if (get_user(c, buf + i)) + return -EFAULT; + if (c == 'V') + expect_close = true; + } + + /* Properly order writes across fork()ed processes */ + mutex_lock(&watchdog.lock); + watchdog.expect_close = expect_close; + mutex_unlock(&watchdog.lock); + } + + /* someone wrote to us, we should restart timer */ + watchdog_keepalive(); + } + return count; +} + +/* + * watchdog_ioctl: + * @inode: inode of the device + * @file: file handle to the device + * @cmd: watchdog command + * @arg: argument pointer + * + * The watchdog API defines a common set of functions for all watchdogs + * according to their available features. + */ +static long watchdog_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) +{ + int status; + int new_options; + int new_timeout; + union { + struct watchdog_info __user *ident; + int __user *i; + } uarg; + + uarg.i = (int __user *)arg; + + switch (cmd) { + case WDIOC_GETSUPPORT: + return copy_to_user(uarg.ident, &watchdog.ident, + sizeof(watchdog.ident)) ? -EFAULT : 0; + + case WDIOC_GETSTATUS: + status = watchdog_get_status(); + if (status < 0) + return status; + return put_user(status, uarg.i); + + case WDIOC_GETBOOTSTATUS: + return put_user(0, uarg.i); + + case WDIOC_SETOPTIONS: + if (get_user(new_options, uarg.i)) + return -EFAULT; + + if (new_options & WDIOS_DISABLECARD) + watchdog_stop(); + + if (new_options & WDIOS_ENABLECARD) + return watchdog_start(); + /* fall through */ + + case WDIOC_KEEPALIVE: + watchdog_keepalive(); + return 0; + + case WDIOC_SETTIMEOUT: + if (get_user(new_timeout, uarg.i)) + return -EFAULT; + + if (watchdog_set_timeout(new_timeout)) + return -EINVAL; + + watchdog_keepalive(); + /* fall through */ + + case WDIOC_GETTIMEOUT: + return put_user(watchdog.timeout, uarg.i); + + default: + return -ENOTTY; + + } +} + +static int watchdog_notify_sys(struct notifier_block *this, unsigned long code, + void *unused) +{ + if (code == SYS_DOWN || code == SYS_HALT) + watchdog_stop(); + return NOTIFY_DONE; +} + +static const struct file_operations watchdog_fops = { + .owner = THIS_MODULE, + .llseek = no_llseek, + .open = watchdog_open, + .release = watchdog_release, + .write = watchdog_write, + .unlocked_ioctl = watchdog_ioctl, +}; + +static struct miscdevice watchdog_miscdev = { + .minor = WATCHDOG_MINOR, + .name = "watchdog", + .fops = &watchdog_fops, +}; + +static struct notifier_block watchdog_notifier = { + .notifier_call = watchdog_notify_sys, +}; + +static int __init watchdog_init(int sioaddr) +{ + int wdt_conf, err = 0; + + /* No need to lock watchdog.lock here because no entry points + * into the module have been registered yet. + */ + watchdog.sioaddr = sioaddr; + watchdog.ident.options = WDIOF_MAGICCLOSE + | WDIOF_KEEPALIVEPING + | WDIOF_CARDRESET; + + snprintf(watchdog.ident.identity, + sizeof(watchdog.ident.identity), "%s watchdog", + f71808e_names[watchdog.type]); + + err = superio_enter(sioaddr); + if (err) + return err; + superio_select(watchdog.sioaddr, SIO_F71808FG_LD_WDT); + + wdt_conf = superio_inb(sioaddr, F71808FG_REG_WDT_CONF); + watchdog.caused_reboot = wdt_conf & BIT(F71808FG_FLAG_WDTMOUT_STS); + + /* + * We don't want WDTMOUT_STS to stick around till regular reboot. + * Write 1 to the bit to clear it to zero. + */ + superio_outb(sioaddr, F71808FG_REG_WDT_CONF, + wdt_conf | BIT(F71808FG_FLAG_WDTMOUT_STS)); + + superio_exit(sioaddr); + + err = watchdog_set_timeout(timeout); + if (err) + return err; + err = watchdog_set_pulse_width(pulse_width); + if (err) + return err; + + err = register_reboot_notifier(&watchdog_notifier); + if (err) + return err; + + err = misc_register(&watchdog_miscdev); + if (err) { + pr_err("cannot register miscdev on minor=%d\n", + watchdog_miscdev.minor); + goto exit_reboot; + } + + if (start_withtimeout) { + if (start_withtimeout <= 0 + || start_withtimeout > max_timeout) { + pr_err("starting timeout out of range\n"); + err = -EINVAL; + goto exit_miscdev; + } + + err = watchdog_start(); + if (err) { + pr_err("cannot start watchdog timer\n"); + goto exit_miscdev; + } + + mutex_lock(&watchdog.lock); + err = superio_enter(sioaddr); + if (err) + goto exit_unlock; + superio_select(watchdog.sioaddr, SIO_F71808FG_LD_WDT); + + if (start_withtimeout > 0xff) { + /* select minutes for timer units */ + superio_set_bit(sioaddr, F71808FG_REG_WDT_CONF, + F71808FG_FLAG_WD_UNIT); + superio_outb(sioaddr, F71808FG_REG_WD_TIME, + DIV_ROUND_UP(start_withtimeout, 60)); + } else { + /* select seconds for timer units */ + superio_clear_bit(sioaddr, F71808FG_REG_WDT_CONF, + F71808FG_FLAG_WD_UNIT); + superio_outb(sioaddr, F71808FG_REG_WD_TIME, + start_withtimeout); + } + + superio_exit(sioaddr); + mutex_unlock(&watchdog.lock); + + if (nowayout) + __module_get(THIS_MODULE); + + pr_info("watchdog started with initial timeout of %u sec\n", + start_withtimeout); + } + + return 0; + +exit_unlock: + mutex_unlock(&watchdog.lock); +exit_miscdev: + misc_deregister(&watchdog_miscdev); +exit_reboot: + unregister_reboot_notifier(&watchdog_notifier); + + return err; +} + +static int __init f71808e_find(int sioaddr) +{ + u16 devid; + int err = superio_enter(sioaddr); + if (err) + return err; + + devid = superio_inw(sioaddr, SIO_REG_MANID); + if (devid != SIO_FINTEK_ID) { + pr_debug("Not a Fintek device\n"); + err = -ENODEV; + goto exit; + } + + devid = force_id ? force_id : superio_inw(sioaddr, SIO_REG_DEVID); + switch (devid) { + case SIO_F71808_ID: + watchdog.type = f71808fg; + break; + case SIO_F71862_ID: + watchdog.type = f71862fg; + err = f71862fg_pin_configure(0); /* validate module parameter */ + break; + case SIO_F71868_ID: + watchdog.type = f71868; + break; + case SIO_F71869_ID: + case SIO_F71869A_ID: + watchdog.type = f71869; + break; + case SIO_F71882_ID: + watchdog.type = f71882fg; + break; + case SIO_F71889_ID: + watchdog.type = f71889fg; + break; + case SIO_F71858_ID: + /* Confirmed (by datasheet) not to have a watchdog. */ + err = -ENODEV; + goto exit; + case SIO_F81865_ID: + watchdog.type = f81865; + break; + case SIO_F81866_ID: + watchdog.type = f81866; + break; + default: + pr_info("Unrecognized Fintek device: %04x\n", + (unsigned int)devid); + err = -ENODEV; + goto exit; + } + + pr_info("Found %s watchdog chip, revision %d\n", + f71808e_names[watchdog.type], + (int)superio_inb(sioaddr, SIO_REG_DEVREV)); +exit: + superio_exit(sioaddr); + return err; +} + +static int __init f71808e_init(void) +{ + static const unsigned short addrs[] = { 0x2e, 0x4e }; + int err = -ENODEV; + int i; + + for (i = 0; i < ARRAY_SIZE(addrs); i++) { + err = f71808e_find(addrs[i]); + if (err == 0) + break; + } + if (i == ARRAY_SIZE(addrs)) + return err; + + return watchdog_init(addrs[i]); +} + +static void __exit f71808e_exit(void) +{ + if (watchdog_is_running()) { + pr_warn("Watchdog timer still running, stopping it\n"); + watchdog_stop(); + } + misc_deregister(&watchdog_miscdev); + unregister_reboot_notifier(&watchdog_notifier); +} + +MODULE_DESCRIPTION("F71808E Watchdog Driver"); +MODULE_AUTHOR("Giel van Schijndel <me@mortis.eu>"); +MODULE_LICENSE("GPL"); + +module_init(f71808e_init); +module_exit(f71808e_exit); diff --git a/drivers/watchdog/ftwdt010_wdt.c b/drivers/watchdog/ftwdt010_wdt.c new file mode 100644 index 000000000..a9c2912ee --- /dev/null +++ b/drivers/watchdog/ftwdt010_wdt.c @@ -0,0 +1,236 @@ +/* + * Watchdog driver for Faraday Technology FTWDT010 + * + * Copyright (C) 2017 Linus Walleij <linus.walleij@linaro.org> + * + * Inspired by the out-of-tree drivers from OpenWRT: + * Copyright (C) 2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/bitops.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/of_device.h> +#include <linux/platform_device.h> +#include <linux/slab.h> +#include <linux/watchdog.h> + +#define FTWDT010_WDCOUNTER 0x0 +#define FTWDT010_WDLOAD 0x4 +#define FTWDT010_WDRESTART 0x8 +#define FTWDT010_WDCR 0xC + +#define WDRESTART_MAGIC 0x5AB9 + +#define WDCR_CLOCK_5MHZ BIT(4) +#define WDCR_WDEXT BIT(3) +#define WDCR_WDINTR BIT(2) +#define WDCR_SYS_RST BIT(1) +#define WDCR_ENABLE BIT(0) + +#define WDT_CLOCK 5000000 /* 5 MHz */ + +struct ftwdt010_wdt { + struct watchdog_device wdd; + struct device *dev; + void __iomem *base; + bool has_irq; +}; + +static inline +struct ftwdt010_wdt *to_ftwdt010_wdt(struct watchdog_device *wdd) +{ + return container_of(wdd, struct ftwdt010_wdt, wdd); +} + +static int ftwdt010_wdt_start(struct watchdog_device *wdd) +{ + struct ftwdt010_wdt *gwdt = to_ftwdt010_wdt(wdd); + u32 enable; + + writel(wdd->timeout * WDT_CLOCK, gwdt->base + FTWDT010_WDLOAD); + writel(WDRESTART_MAGIC, gwdt->base + FTWDT010_WDRESTART); + /* set clock before enabling */ + enable = WDCR_CLOCK_5MHZ | WDCR_SYS_RST; + writel(enable, gwdt->base + FTWDT010_WDCR); + if (gwdt->has_irq) + enable |= WDCR_WDINTR; + enable |= WDCR_ENABLE; + writel(enable, gwdt->base + FTWDT010_WDCR); + + return 0; +} + +static int ftwdt010_wdt_stop(struct watchdog_device *wdd) +{ + struct ftwdt010_wdt *gwdt = to_ftwdt010_wdt(wdd); + + writel(0, gwdt->base + FTWDT010_WDCR); + + return 0; +} + +static int ftwdt010_wdt_ping(struct watchdog_device *wdd) +{ + struct ftwdt010_wdt *gwdt = to_ftwdt010_wdt(wdd); + + writel(WDRESTART_MAGIC, gwdt->base + FTWDT010_WDRESTART); + + return 0; +} + +static int ftwdt010_wdt_set_timeout(struct watchdog_device *wdd, + unsigned int timeout) +{ + wdd->timeout = timeout; + if (watchdog_active(wdd)) + ftwdt010_wdt_start(wdd); + + return 0; +} + +static irqreturn_t ftwdt010_wdt_interrupt(int irq, void *data) +{ + struct ftwdt010_wdt *gwdt = data; + + watchdog_notify_pretimeout(&gwdt->wdd); + + return IRQ_HANDLED; +} + +static const struct watchdog_ops ftwdt010_wdt_ops = { + .start = ftwdt010_wdt_start, + .stop = ftwdt010_wdt_stop, + .ping = ftwdt010_wdt_ping, + .set_timeout = ftwdt010_wdt_set_timeout, + .owner = THIS_MODULE, +}; + +static const struct watchdog_info ftwdt010_wdt_info = { + .options = WDIOF_KEEPALIVEPING + | WDIOF_MAGICCLOSE + | WDIOF_SETTIMEOUT, + .identity = KBUILD_MODNAME, +}; + + +static int ftwdt010_wdt_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct resource *res; + struct ftwdt010_wdt *gwdt; + unsigned int reg; + int irq; + int ret; + + gwdt = devm_kzalloc(dev, sizeof(*gwdt), GFP_KERNEL); + if (!gwdt) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + gwdt->base = devm_ioremap_resource(dev, res); + if (IS_ERR(gwdt->base)) + return PTR_ERR(gwdt->base); + + gwdt->dev = dev; + gwdt->wdd.info = &ftwdt010_wdt_info; + gwdt->wdd.ops = &ftwdt010_wdt_ops; + gwdt->wdd.min_timeout = 1; + gwdt->wdd.max_timeout = 0xFFFFFFFF / WDT_CLOCK; + gwdt->wdd.parent = dev; + + /* + * If 'timeout-sec' unspecified in devicetree, assume a 13 second + * default. + */ + gwdt->wdd.timeout = 13U; + watchdog_init_timeout(&gwdt->wdd, 0, dev); + + reg = readw(gwdt->base + FTWDT010_WDCR); + if (reg & WDCR_ENABLE) { + /* Watchdog was enabled by the bootloader, disable it. */ + reg &= ~WDCR_ENABLE; + writel(reg, gwdt->base + FTWDT010_WDCR); + } + + irq = platform_get_irq(pdev, 0); + if (irq) { + ret = devm_request_irq(dev, irq, ftwdt010_wdt_interrupt, 0, + "watchdog bark", gwdt); + if (ret) + return ret; + gwdt->has_irq = true; + } + + ret = devm_watchdog_register_device(dev, &gwdt->wdd); + if (ret) { + dev_err(&pdev->dev, "failed to register watchdog\n"); + return ret; + } + + /* Set up platform driver data */ + platform_set_drvdata(pdev, gwdt); + dev_info(dev, "FTWDT010 watchdog driver enabled\n"); + + return 0; +} + +static int __maybe_unused ftwdt010_wdt_suspend(struct device *dev) +{ + struct ftwdt010_wdt *gwdt = dev_get_drvdata(dev); + unsigned int reg; + + reg = readw(gwdt->base + FTWDT010_WDCR); + reg &= ~WDCR_ENABLE; + writel(reg, gwdt->base + FTWDT010_WDCR); + + return 0; +} + +static int __maybe_unused ftwdt010_wdt_resume(struct device *dev) +{ + struct ftwdt010_wdt *gwdt = dev_get_drvdata(dev); + unsigned int reg; + + if (watchdog_active(&gwdt->wdd)) { + reg = readw(gwdt->base + FTWDT010_WDCR); + reg |= WDCR_ENABLE; + writel(reg, gwdt->base + FTWDT010_WDCR); + } + + return 0; +} + +static const struct dev_pm_ops ftwdt010_wdt_dev_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(ftwdt010_wdt_suspend, + ftwdt010_wdt_resume) +}; + +#ifdef CONFIG_OF +static const struct of_device_id ftwdt010_wdt_match[] = { + { .compatible = "faraday,ftwdt010" }, + { .compatible = "cortina,gemini-watchdog" }, + {}, +}; +MODULE_DEVICE_TABLE(of, ftwdt010_wdt_match); +#endif + +static struct platform_driver ftwdt010_wdt_driver = { + .probe = ftwdt010_wdt_probe, + .driver = { + .name = "ftwdt010-wdt", + .of_match_table = of_match_ptr(ftwdt010_wdt_match), + .pm = &ftwdt010_wdt_dev_pm_ops, + }, +}; +module_platform_driver(ftwdt010_wdt_driver); +MODULE_AUTHOR("Linus Walleij"); +MODULE_DESCRIPTION("Watchdog driver for Faraday Technology FTWDT010"); +MODULE_LICENSE("GPL"); diff --git a/drivers/watchdog/gef_wdt.c b/drivers/watchdog/gef_wdt.c new file mode 100644 index 000000000..006e23480 --- /dev/null +++ b/drivers/watchdog/gef_wdt.c @@ -0,0 +1,334 @@ +/* + * GE watchdog userspace interface + * + * Author: Martyn Welch <martyn.welch@ge.com> + * + * Copyright 2008 GE Intelligent Platforms Embedded Systems, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * Based on: mv64x60_wdt.c (MV64X60 watchdog userspace interface) + * Author: James Chapman <jchapman@katalix.com> + */ + +/* TODO: + * This driver does not provide support for the hardwares capability of sending + * an interrupt at a programmable threshold. + * + * This driver currently can only support 1 watchdog - there are 2 in the + * hardware that this driver supports. Thus one could be configured as a + * process-based watchdog (via /dev/watchdog), the second (using the interrupt + * capabilities) a kernel-based watchdog. + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/kernel.h> +#include <linux/compiler.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/miscdevice.h> +#include <linux/watchdog.h> +#include <linux/fs.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/of_platform.h> +#include <linux/io.h> +#include <linux/uaccess.h> + +#include <sysdev/fsl_soc.h> + +/* + * The watchdog configuration register contains a pair of 2-bit fields, + * 1. a reload field, bits 27-26, which triggers a reload of + * the countdown register, and + * 2. an enable field, bits 25-24, which toggles between + * enabling and disabling the watchdog timer. + * Bit 31 is a read-only field which indicates whether the + * watchdog timer is currently enabled. + * + * The low 24 bits contain the timer reload value. + */ +#define GEF_WDC_ENABLE_SHIFT 24 +#define GEF_WDC_SERVICE_SHIFT 26 +#define GEF_WDC_ENABLED_SHIFT 31 + +#define GEF_WDC_ENABLED_TRUE 1 +#define GEF_WDC_ENABLED_FALSE 0 + +/* Flags bits */ +#define GEF_WDOG_FLAG_OPENED 0 + +static unsigned long wdt_flags; +static int wdt_status; +static void __iomem *gef_wdt_regs; +static int gef_wdt_timeout; +static int gef_wdt_count; +static unsigned int bus_clk; +static char expect_close; +static DEFINE_SPINLOCK(gef_wdt_spinlock); + +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); +MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); + + +static int gef_wdt_toggle_wdc(int enabled_predicate, int field_shift) +{ + u32 data; + u32 enabled; + int ret = 0; + + spin_lock(&gef_wdt_spinlock); + data = ioread32be(gef_wdt_regs); + enabled = (data >> GEF_WDC_ENABLED_SHIFT) & 1; + + /* only toggle the requested field if enabled state matches predicate */ + if ((enabled ^ enabled_predicate) == 0) { + /* We write a 1, then a 2 -- to the appropriate field */ + data = (1 << field_shift) | gef_wdt_count; + iowrite32be(data, gef_wdt_regs); + + data = (2 << field_shift) | gef_wdt_count; + iowrite32be(data, gef_wdt_regs); + ret = 1; + } + spin_unlock(&gef_wdt_spinlock); + + return ret; +} + +static void gef_wdt_service(void) +{ + gef_wdt_toggle_wdc(GEF_WDC_ENABLED_TRUE, + GEF_WDC_SERVICE_SHIFT); +} + +static void gef_wdt_handler_enable(void) +{ + if (gef_wdt_toggle_wdc(GEF_WDC_ENABLED_FALSE, + GEF_WDC_ENABLE_SHIFT)) { + gef_wdt_service(); + pr_notice("watchdog activated\n"); + } +} + +static void gef_wdt_handler_disable(void) +{ + if (gef_wdt_toggle_wdc(GEF_WDC_ENABLED_TRUE, + GEF_WDC_ENABLE_SHIFT)) + pr_notice("watchdog deactivated\n"); +} + +static void gef_wdt_set_timeout(unsigned int timeout) +{ + /* maximum bus cycle count is 0xFFFFFFFF */ + if (timeout > 0xFFFFFFFF / bus_clk) + timeout = 0xFFFFFFFF / bus_clk; + + /* Register only holds upper 24 bits, bit shifted into lower 24 */ + gef_wdt_count = (timeout * bus_clk) >> 8; + gef_wdt_timeout = timeout; +} + + +static ssize_t gef_wdt_write(struct file *file, const char __user *data, + size_t len, loff_t *ppos) +{ + if (len) { + if (!nowayout) { + size_t i; + + expect_close = 0; + + for (i = 0; i != len; i++) { + char c; + if (get_user(c, data + i)) + return -EFAULT; + if (c == 'V') + expect_close = 42; + } + } + gef_wdt_service(); + } + + return len; +} + +static long gef_wdt_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) +{ + int timeout; + int options; + void __user *argp = (void __user *)arg; + static const struct watchdog_info info = { + .options = WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE | + WDIOF_KEEPALIVEPING, + .firmware_version = 0, + .identity = "GE watchdog", + }; + + switch (cmd) { + case WDIOC_GETSUPPORT: + if (copy_to_user(argp, &info, sizeof(info))) + return -EFAULT; + break; + + case WDIOC_GETSTATUS: + case WDIOC_GETBOOTSTATUS: + if (put_user(wdt_status, (int __user *)argp)) + return -EFAULT; + wdt_status &= ~WDIOF_KEEPALIVEPING; + break; + + case WDIOC_SETOPTIONS: + if (get_user(options, (int __user *)argp)) + return -EFAULT; + + if (options & WDIOS_DISABLECARD) + gef_wdt_handler_disable(); + + if (options & WDIOS_ENABLECARD) + gef_wdt_handler_enable(); + break; + + case WDIOC_KEEPALIVE: + gef_wdt_service(); + wdt_status |= WDIOF_KEEPALIVEPING; + break; + + case WDIOC_SETTIMEOUT: + if (get_user(timeout, (int __user *)argp)) + return -EFAULT; + gef_wdt_set_timeout(timeout); + /* Fall through */ + + case WDIOC_GETTIMEOUT: + if (put_user(gef_wdt_timeout, (int __user *)argp)) + return -EFAULT; + break; + + default: + return -ENOTTY; + } + + return 0; +} + +static int gef_wdt_open(struct inode *inode, struct file *file) +{ + if (test_and_set_bit(GEF_WDOG_FLAG_OPENED, &wdt_flags)) + return -EBUSY; + + if (nowayout) + __module_get(THIS_MODULE); + + gef_wdt_handler_enable(); + + return nonseekable_open(inode, file); +} + +static int gef_wdt_release(struct inode *inode, struct file *file) +{ + if (expect_close == 42) + gef_wdt_handler_disable(); + else { + pr_crit("unexpected close, not stopping timer!\n"); + gef_wdt_service(); + } + expect_close = 0; + + clear_bit(GEF_WDOG_FLAG_OPENED, &wdt_flags); + + return 0; +} + +static const struct file_operations gef_wdt_fops = { + .owner = THIS_MODULE, + .llseek = no_llseek, + .write = gef_wdt_write, + .unlocked_ioctl = gef_wdt_ioctl, + .open = gef_wdt_open, + .release = gef_wdt_release, +}; + +static struct miscdevice gef_wdt_miscdev = { + .minor = WATCHDOG_MINOR, + .name = "watchdog", + .fops = &gef_wdt_fops, +}; + + +static int gef_wdt_probe(struct platform_device *dev) +{ + int timeout = 10; + u32 freq; + + bus_clk = 133; /* in MHz */ + + freq = fsl_get_sys_freq(); + if (freq != -1) + bus_clk = freq; + + /* Map devices registers into memory */ + gef_wdt_regs = of_iomap(dev->dev.of_node, 0); + if (gef_wdt_regs == NULL) + return -ENOMEM; + + gef_wdt_set_timeout(timeout); + + gef_wdt_handler_disable(); /* in case timer was already running */ + + return misc_register(&gef_wdt_miscdev); +} + +static int gef_wdt_remove(struct platform_device *dev) +{ + misc_deregister(&gef_wdt_miscdev); + + gef_wdt_handler_disable(); + + iounmap(gef_wdt_regs); + + return 0; +} + +static const struct of_device_id gef_wdt_ids[] = { + { + .compatible = "gef,fpga-wdt", + }, + {}, +}; +MODULE_DEVICE_TABLE(of, gef_wdt_ids); + +static struct platform_driver gef_wdt_driver = { + .driver = { + .name = "gef_wdt", + .of_match_table = gef_wdt_ids, + }, + .probe = gef_wdt_probe, + .remove = gef_wdt_remove, +}; + +static int __init gef_wdt_init(void) +{ + pr_info("GE watchdog driver\n"); + return platform_driver_register(&gef_wdt_driver); +} + +static void __exit gef_wdt_exit(void) +{ + platform_driver_unregister(&gef_wdt_driver); +} + +module_init(gef_wdt_init); +module_exit(gef_wdt_exit); + +MODULE_AUTHOR("Martyn Welch <martyn.welch@ge.com>"); +MODULE_DESCRIPTION("GE watchdog driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:gef_wdt"); diff --git a/drivers/watchdog/geodewdt.c b/drivers/watchdog/geodewdt.c new file mode 100644 index 000000000..88e01238f --- /dev/null +++ b/drivers/watchdog/geodewdt.c @@ -0,0 +1,295 @@ +/* Watchdog timer for machines with the CS5535/CS5536 companion chip + * + * Copyright (C) 2006-2007, Advanced Micro Devices, Inc. + * Copyright (C) 2009 Andres Salomon <dilinger@collabora.co.uk> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/types.h> +#include <linux/miscdevice.h> +#include <linux/watchdog.h> +#include <linux/fs.h> +#include <linux/platform_device.h> +#include <linux/reboot.h> +#include <linux/uaccess.h> + +#include <linux/cs5535.h> + +#define GEODEWDT_HZ 500 +#define GEODEWDT_SCALE 6 +#define GEODEWDT_MAX_SECONDS 131 + +#define WDT_FLAGS_OPEN 1 +#define WDT_FLAGS_ORPHAN 2 + +#define DRV_NAME "geodewdt" +#define WATCHDOG_NAME "Geode GX/LX WDT" +#define WATCHDOG_TIMEOUT 60 + +static int timeout = WATCHDOG_TIMEOUT; +module_param(timeout, int, 0); +MODULE_PARM_DESC(timeout, + "Watchdog timeout in seconds. 1<= timeout <=131, default=" + __MODULE_STRING(WATCHDOG_TIMEOUT) "."); + +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); +MODULE_PARM_DESC(nowayout, + "Watchdog cannot be stopped once started (default=" + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); + +static struct platform_device *geodewdt_platform_device; +static unsigned long wdt_flags; +static struct cs5535_mfgpt_timer *wdt_timer; +static int safe_close; + +static void geodewdt_ping(void) +{ + /* Stop the counter */ + cs5535_mfgpt_write(wdt_timer, MFGPT_REG_SETUP, 0); + + /* Reset the counter */ + cs5535_mfgpt_write(wdt_timer, MFGPT_REG_COUNTER, 0); + + /* Enable the counter */ + cs5535_mfgpt_write(wdt_timer, MFGPT_REG_SETUP, MFGPT_SETUP_CNTEN); +} + +static void geodewdt_disable(void) +{ + cs5535_mfgpt_write(wdt_timer, MFGPT_REG_SETUP, 0); + cs5535_mfgpt_write(wdt_timer, MFGPT_REG_COUNTER, 0); +} + +static int geodewdt_set_heartbeat(int val) +{ + if (val < 1 || val > GEODEWDT_MAX_SECONDS) + return -EINVAL; + + cs5535_mfgpt_write(wdt_timer, MFGPT_REG_SETUP, 0); + cs5535_mfgpt_write(wdt_timer, MFGPT_REG_CMP2, val * GEODEWDT_HZ); + cs5535_mfgpt_write(wdt_timer, MFGPT_REG_COUNTER, 0); + cs5535_mfgpt_write(wdt_timer, MFGPT_REG_SETUP, MFGPT_SETUP_CNTEN); + + timeout = val; + return 0; +} + +static int geodewdt_open(struct inode *inode, struct file *file) +{ + if (test_and_set_bit(WDT_FLAGS_OPEN, &wdt_flags)) + return -EBUSY; + + if (!test_and_clear_bit(WDT_FLAGS_ORPHAN, &wdt_flags)) + __module_get(THIS_MODULE); + + geodewdt_ping(); + return nonseekable_open(inode, file); +} + +static int geodewdt_release(struct inode *inode, struct file *file) +{ + if (safe_close) { + geodewdt_disable(); + module_put(THIS_MODULE); + } else { + pr_crit("Unexpected close - watchdog is not stopping\n"); + geodewdt_ping(); + + set_bit(WDT_FLAGS_ORPHAN, &wdt_flags); + } + + clear_bit(WDT_FLAGS_OPEN, &wdt_flags); + safe_close = 0; + return 0; +} + +static ssize_t geodewdt_write(struct file *file, const char __user *data, + size_t len, loff_t *ppos) +{ + if (len) { + if (!nowayout) { + size_t i; + safe_close = 0; + + for (i = 0; i != len; i++) { + char c; + + if (get_user(c, data + i)) + return -EFAULT; + + if (c == 'V') + safe_close = 1; + } + } + + geodewdt_ping(); + } + return len; +} + +static long geodewdt_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) +{ + void __user *argp = (void __user *)arg; + int __user *p = argp; + int interval; + + static const struct watchdog_info ident = { + .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING + | WDIOF_MAGICCLOSE, + .firmware_version = 1, + .identity = WATCHDOG_NAME, + }; + + switch (cmd) { + case WDIOC_GETSUPPORT: + return copy_to_user(argp, &ident, + sizeof(ident)) ? -EFAULT : 0; + break; + + case WDIOC_GETSTATUS: + case WDIOC_GETBOOTSTATUS: + return put_user(0, p); + + case WDIOC_SETOPTIONS: + { + int options, ret = -EINVAL; + + if (get_user(options, p)) + return -EFAULT; + + if (options & WDIOS_DISABLECARD) { + geodewdt_disable(); + ret = 0; + } + + if (options & WDIOS_ENABLECARD) { + geodewdt_ping(); + ret = 0; + } + + return ret; + } + case WDIOC_KEEPALIVE: + geodewdt_ping(); + return 0; + + case WDIOC_SETTIMEOUT: + if (get_user(interval, p)) + return -EFAULT; + + if (geodewdt_set_heartbeat(interval)) + return -EINVAL; + /* Fall through */ + case WDIOC_GETTIMEOUT: + return put_user(timeout, p); + + default: + return -ENOTTY; + } + + return 0; +} + +static const struct file_operations geodewdt_fops = { + .owner = THIS_MODULE, + .llseek = no_llseek, + .write = geodewdt_write, + .unlocked_ioctl = geodewdt_ioctl, + .open = geodewdt_open, + .release = geodewdt_release, +}; + +static struct miscdevice geodewdt_miscdev = { + .minor = WATCHDOG_MINOR, + .name = "watchdog", + .fops = &geodewdt_fops, +}; + +static int __init geodewdt_probe(struct platform_device *dev) +{ + int ret; + + wdt_timer = cs5535_mfgpt_alloc_timer(MFGPT_TIMER_ANY, MFGPT_DOMAIN_WORKING); + if (!wdt_timer) { + pr_err("No timers were available\n"); + return -ENODEV; + } + + /* Set up the timer */ + + cs5535_mfgpt_write(wdt_timer, MFGPT_REG_SETUP, + GEODEWDT_SCALE | (3 << 8)); + + /* Set up comparator 2 to reset when the event fires */ + cs5535_mfgpt_toggle_event(wdt_timer, MFGPT_CMP2, MFGPT_EVENT_RESET, 1); + + /* Set up the initial timeout */ + + cs5535_mfgpt_write(wdt_timer, MFGPT_REG_CMP2, + timeout * GEODEWDT_HZ); + + ret = misc_register(&geodewdt_miscdev); + + return ret; +} + +static int geodewdt_remove(struct platform_device *dev) +{ + misc_deregister(&geodewdt_miscdev); + return 0; +} + +static void geodewdt_shutdown(struct platform_device *dev) +{ + geodewdt_disable(); +} + +static struct platform_driver geodewdt_driver = { + .remove = geodewdt_remove, + .shutdown = geodewdt_shutdown, + .driver = { + .name = DRV_NAME, + }, +}; + +static int __init geodewdt_init(void) +{ + int ret; + + geodewdt_platform_device = platform_device_register_simple(DRV_NAME, + -1, NULL, 0); + if (IS_ERR(geodewdt_platform_device)) + return PTR_ERR(geodewdt_platform_device); + + ret = platform_driver_probe(&geodewdt_driver, geodewdt_probe); + if (ret) + goto err; + + return 0; +err: + platform_device_unregister(geodewdt_platform_device); + return ret; +} + +static void __exit geodewdt_exit(void) +{ + platform_device_unregister(geodewdt_platform_device); + platform_driver_unregister(&geodewdt_driver); +} + +module_init(geodewdt_init); +module_exit(geodewdt_exit); + +MODULE_AUTHOR("Advanced Micro Devices, Inc"); +MODULE_DESCRIPTION("Geode GX/LX Watchdog Driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/watchdog/gpio_wdt.c b/drivers/watchdog/gpio_wdt.c new file mode 100644 index 000000000..ea77cae03 --- /dev/null +++ b/drivers/watchdog/gpio_wdt.c @@ -0,0 +1,205 @@ +/* + * Driver for watchdog device controlled through GPIO-line + * + * Author: 2013, Alexander Shiyan <shc_work@mail.ru> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/err.h> +#include <linux/delay.h> +#include <linux/module.h> +#include <linux/gpio/consumer.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/watchdog.h> + +#define SOFT_TIMEOUT_MIN 1 +#define SOFT_TIMEOUT_DEF 60 + +enum { + HW_ALGO_TOGGLE, + HW_ALGO_LEVEL, +}; + +struct gpio_wdt_priv { + struct gpio_desc *gpiod; + bool state; + bool always_running; + unsigned int hw_algo; + struct watchdog_device wdd; +}; + +static void gpio_wdt_disable(struct gpio_wdt_priv *priv) +{ + /* Eternal ping */ + gpiod_set_value_cansleep(priv->gpiod, 1); + + /* Put GPIO back to tristate */ + if (priv->hw_algo == HW_ALGO_TOGGLE) + gpiod_direction_input(priv->gpiod); +} + +static int gpio_wdt_ping(struct watchdog_device *wdd) +{ + struct gpio_wdt_priv *priv = watchdog_get_drvdata(wdd); + + switch (priv->hw_algo) { + case HW_ALGO_TOGGLE: + /* Toggle output pin */ + priv->state = !priv->state; + gpiod_set_value_cansleep(priv->gpiod, priv->state); + break; + case HW_ALGO_LEVEL: + /* Pulse */ + gpiod_set_value_cansleep(priv->gpiod, 1); + udelay(1); + gpiod_set_value_cansleep(priv->gpiod, 0); + break; + } + return 0; +} + +static int gpio_wdt_start(struct watchdog_device *wdd) +{ + struct gpio_wdt_priv *priv = watchdog_get_drvdata(wdd); + + priv->state = 0; + gpiod_direction_output(priv->gpiod, priv->state); + + set_bit(WDOG_HW_RUNNING, &wdd->status); + + return gpio_wdt_ping(wdd); +} + +static int gpio_wdt_stop(struct watchdog_device *wdd) +{ + struct gpio_wdt_priv *priv = watchdog_get_drvdata(wdd); + + if (!priv->always_running) { + gpio_wdt_disable(priv); + } else { + set_bit(WDOG_HW_RUNNING, &wdd->status); + } + + return 0; +} + +static const struct watchdog_info gpio_wdt_ident = { + .options = WDIOF_MAGICCLOSE | WDIOF_KEEPALIVEPING | + WDIOF_SETTIMEOUT, + .identity = "GPIO Watchdog", +}; + +static const struct watchdog_ops gpio_wdt_ops = { + .owner = THIS_MODULE, + .start = gpio_wdt_start, + .stop = gpio_wdt_stop, + .ping = gpio_wdt_ping, +}; + +static int gpio_wdt_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct device_node *np = dev->of_node; + struct gpio_wdt_priv *priv; + enum gpiod_flags gflags; + unsigned int hw_margin; + const char *algo; + int ret; + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + platform_set_drvdata(pdev, priv); + + ret = of_property_read_string(np, "hw_algo", &algo); + if (ret) + return ret; + if (!strcmp(algo, "toggle")) { + priv->hw_algo = HW_ALGO_TOGGLE; + gflags = GPIOD_IN; + } else if (!strcmp(algo, "level")) { + priv->hw_algo = HW_ALGO_LEVEL; + gflags = GPIOD_OUT_LOW; + } else { + return -EINVAL; + } + + priv->gpiod = devm_gpiod_get(dev, NULL, gflags); + if (IS_ERR(priv->gpiod)) + return PTR_ERR(priv->gpiod); + + ret = of_property_read_u32(np, + "hw_margin_ms", &hw_margin); + if (ret) + return ret; + /* Disallow values lower than 2 and higher than 65535 ms */ + if (hw_margin < 2 || hw_margin > 65535) + return -EINVAL; + + priv->always_running = of_property_read_bool(np, + "always-running"); + + watchdog_set_drvdata(&priv->wdd, priv); + + priv->wdd.info = &gpio_wdt_ident; + priv->wdd.ops = &gpio_wdt_ops; + priv->wdd.min_timeout = SOFT_TIMEOUT_MIN; + priv->wdd.max_hw_heartbeat_ms = hw_margin; + priv->wdd.parent = dev; + priv->wdd.timeout = SOFT_TIMEOUT_DEF; + + watchdog_init_timeout(&priv->wdd, 0, &pdev->dev); + + watchdog_stop_on_reboot(&priv->wdd); + + if (priv->always_running) + gpio_wdt_start(&priv->wdd); + + ret = watchdog_register_device(&priv->wdd); + + return ret; +} + +static int gpio_wdt_remove(struct platform_device *pdev) +{ + struct gpio_wdt_priv *priv = platform_get_drvdata(pdev); + + watchdog_unregister_device(&priv->wdd); + + return 0; +} + +static const struct of_device_id gpio_wdt_dt_ids[] = { + { .compatible = "linux,wdt-gpio", }, + { } +}; +MODULE_DEVICE_TABLE(of, gpio_wdt_dt_ids); + +static struct platform_driver gpio_wdt_driver = { + .driver = { + .name = "gpio-wdt", + .of_match_table = gpio_wdt_dt_ids, + }, + .probe = gpio_wdt_probe, + .remove = gpio_wdt_remove, +}; + +#ifdef CONFIG_GPIO_WATCHDOG_ARCH_INITCALL +static int __init gpio_wdt_init(void) +{ + return platform_driver_register(&gpio_wdt_driver); +} +arch_initcall(gpio_wdt_init); +#else +module_platform_driver(gpio_wdt_driver); +#endif + +MODULE_AUTHOR("Alexander Shiyan <shc_work@mail.ru>"); +MODULE_DESCRIPTION("GPIO Watchdog"); +MODULE_LICENSE("GPL"); diff --git a/drivers/watchdog/hpwdt.c b/drivers/watchdog/hpwdt.c new file mode 100644 index 000000000..9dc62a461 --- /dev/null +++ b/drivers/watchdog/hpwdt.c @@ -0,0 +1,376 @@ +/* + * HPE WatchDog Driver + * based on + * + * SoftDog 0.05: A Software Watchdog Device + * + * (c) Copyright 2018 Hewlett Packard Enterprise Development LP + * Thomas Mingarelli <thomas.mingarelli@hpe.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation + * + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/device.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/pci.h> +#include <linux/pci_ids.h> +#include <linux/types.h> +#include <linux/watchdog.h> +#include <asm/nmi.h> + +#define HPWDT_VERSION "2.0.0" +#define SECS_TO_TICKS(secs) ((secs) * 1000 / 128) +#define TICKS_TO_SECS(ticks) ((ticks) * 128 / 1000) +#define HPWDT_MAX_TIMER TICKS_TO_SECS(65535) +#define DEFAULT_MARGIN 30 +#define PRETIMEOUT_SEC 9 + +static bool ilo5; +static unsigned int soft_margin = DEFAULT_MARGIN; /* in seconds */ +static bool nowayout = WATCHDOG_NOWAYOUT; +static bool pretimeout = IS_ENABLED(CONFIG_HPWDT_NMI_DECODING); + +static void __iomem *pci_mem_addr; /* the PCI-memory address */ +static unsigned long __iomem *hpwdt_nmistat; +static unsigned long __iomem *hpwdt_timer_reg; +static unsigned long __iomem *hpwdt_timer_con; + +static const struct pci_device_id hpwdt_devices[] = { + { PCI_DEVICE(PCI_VENDOR_ID_COMPAQ, 0xB203) }, /* iLO2 */ + { PCI_DEVICE(PCI_VENDOR_ID_HP, 0x3306) }, /* iLO3 */ + {0}, /* terminate list */ +}; +MODULE_DEVICE_TABLE(pci, hpwdt_devices); + + +/* + * Watchdog operations + */ +static int hpwdt_start(struct watchdog_device *wdd) +{ + int control = 0x81 | (pretimeout ? 0x4 : 0); + int reload = SECS_TO_TICKS(wdd->timeout); + + dev_dbg(wdd->parent, "start watchdog 0x%08x:0x%02x\n", reload, control); + iowrite16(reload, hpwdt_timer_reg); + iowrite8(control, hpwdt_timer_con); + + return 0; +} + +static void hpwdt_stop(void) +{ + unsigned long data; + + pr_debug("stop watchdog\n"); + + data = ioread8(hpwdt_timer_con); + data &= 0xFE; + iowrite8(data, hpwdt_timer_con); +} + +static int hpwdt_stop_core(struct watchdog_device *wdd) +{ + hpwdt_stop(); + + return 0; +} + +static int hpwdt_ping(struct watchdog_device *wdd) +{ + int reload = SECS_TO_TICKS(wdd->timeout); + + dev_dbg(wdd->parent, "ping watchdog 0x%08x\n", reload); + iowrite16(reload, hpwdt_timer_reg); + + return 0; +} + +static unsigned int hpwdt_gettimeleft(struct watchdog_device *wdd) +{ + return TICKS_TO_SECS(ioread16(hpwdt_timer_reg)); +} + +static int hpwdt_settimeout(struct watchdog_device *wdd, unsigned int val) +{ + dev_dbg(wdd->parent, "set_timeout = %d\n", val); + + wdd->timeout = val; + if (val <= wdd->pretimeout) { + dev_dbg(wdd->parent, "pretimeout < timeout. Setting to zero\n"); + wdd->pretimeout = 0; + pretimeout = 0; + if (watchdog_active(wdd)) + hpwdt_start(wdd); + } + hpwdt_ping(wdd); + + return 0; +} + +#ifdef CONFIG_HPWDT_NMI_DECODING +static int hpwdt_set_pretimeout(struct watchdog_device *wdd, unsigned int req) +{ + unsigned int val = 0; + + dev_dbg(wdd->parent, "set_pretimeout = %d\n", req); + if (req) { + val = PRETIMEOUT_SEC; + if (val >= wdd->timeout) + return -EINVAL; + } + + if (val != req) + dev_dbg(wdd->parent, "Rounding pretimeout to: %d\n", val); + + wdd->pretimeout = val; + pretimeout = !!val; + + if (watchdog_active(wdd)) + hpwdt_start(wdd); + + return 0; +} + +static int hpwdt_my_nmi(void) +{ + return ioread8(hpwdt_nmistat) & 0x6; +} + +/* + * NMI Handler + */ +static int hpwdt_pretimeout(unsigned int ulReason, struct pt_regs *regs) +{ + unsigned int mynmi = hpwdt_my_nmi(); + static char panic_msg[] = + "00: An NMI occurred. Depending on your system the reason " + "for the NMI is logged in any one of the following resources:\n" + "1. Integrated Management Log (IML)\n" + "2. OA Syslog\n" + "3. OA Forward Progress Log\n" + "4. iLO Event Log"; + + if (ilo5 && ulReason == NMI_UNKNOWN && !mynmi) + return NMI_DONE; + + if (ilo5 && !pretimeout) + return NMI_DONE; + + hpwdt_stop(); + + hex_byte_pack(panic_msg, mynmi); + nmi_panic(regs, panic_msg); + + return NMI_HANDLED; +} +#endif /* CONFIG_HPWDT_NMI_DECODING */ + + +static const struct watchdog_info ident = { + .options = WDIOF_PRETIMEOUT | + WDIOF_SETTIMEOUT | + WDIOF_KEEPALIVEPING | + WDIOF_MAGICCLOSE, + .identity = "HPE iLO2+ HW Watchdog Timer", +}; + +/* + * Kernel interfaces + */ + +static const struct watchdog_ops hpwdt_ops = { + .owner = THIS_MODULE, + .start = hpwdt_start, + .stop = hpwdt_stop_core, + .ping = hpwdt_ping, + .set_timeout = hpwdt_settimeout, + .get_timeleft = hpwdt_gettimeleft, +#ifdef CONFIG_HPWDT_NMI_DECODING + .set_pretimeout = hpwdt_set_pretimeout, +#endif +}; + +static struct watchdog_device hpwdt_dev = { + .info = &ident, + .ops = &hpwdt_ops, + .min_timeout = 1, + .max_timeout = HPWDT_MAX_TIMER, + .timeout = DEFAULT_MARGIN, +#ifdef CONFIG_HPWDT_NMI_DECODING + .pretimeout = PRETIMEOUT_SEC, +#endif +}; + + +/* + * Init & Exit + */ + +static int hpwdt_init_nmi_decoding(struct pci_dev *dev) +{ +#ifdef CONFIG_HPWDT_NMI_DECODING + int retval; + /* + * Only one function can register for NMI_UNKNOWN + */ + retval = register_nmi_handler(NMI_UNKNOWN, hpwdt_pretimeout, 0, "hpwdt"); + if (retval) + goto error; + retval = register_nmi_handler(NMI_SERR, hpwdt_pretimeout, 0, "hpwdt"); + if (retval) + goto error1; + retval = register_nmi_handler(NMI_IO_CHECK, hpwdt_pretimeout, 0, "hpwdt"); + if (retval) + goto error2; + + dev_info(&dev->dev, + "HPE Watchdog Timer Driver: NMI decoding initialized\n"); + + return 0; + +error2: + unregister_nmi_handler(NMI_SERR, "hpwdt"); +error1: + unregister_nmi_handler(NMI_UNKNOWN, "hpwdt"); +error: + dev_warn(&dev->dev, + "Unable to register a die notifier (err=%d).\n", + retval); + return retval; +#endif /* CONFIG_HPWDT_NMI_DECODING */ + return 0; +} + +static void hpwdt_exit_nmi_decoding(void) +{ +#ifdef CONFIG_HPWDT_NMI_DECODING + unregister_nmi_handler(NMI_UNKNOWN, "hpwdt"); + unregister_nmi_handler(NMI_SERR, "hpwdt"); + unregister_nmi_handler(NMI_IO_CHECK, "hpwdt"); +#endif +} + +static int hpwdt_init_one(struct pci_dev *dev, + const struct pci_device_id *ent) +{ + int retval; + + /* + * First let's find out if we are on an iLO2+ server. We will + * not run on a legacy ASM box. + * So we only support the G5 ProLiant servers and higher. + */ + if (dev->subsystem_vendor != PCI_VENDOR_ID_HP && + dev->subsystem_vendor != PCI_VENDOR_ID_HP_3PAR) { + dev_warn(&dev->dev, + "This server does not have an iLO2+ ASIC.\n"); + return -ENODEV; + } + + /* + * Ignore all auxilary iLO devices with the following PCI ID + */ + if (dev->subsystem_vendor == PCI_VENDOR_ID_HP && + dev->subsystem_device == 0x1979) + return -ENODEV; + + if (pci_enable_device(dev)) { + dev_warn(&dev->dev, + "Not possible to enable PCI Device: 0x%x:0x%x.\n", + ent->vendor, ent->device); + return -ENODEV; + } + + pci_mem_addr = pci_iomap(dev, 1, 0x80); + if (!pci_mem_addr) { + dev_warn(&dev->dev, + "Unable to detect the iLO2+ server memory.\n"); + retval = -ENOMEM; + goto error_pci_iomap; + } + hpwdt_nmistat = pci_mem_addr + 0x6e; + hpwdt_timer_reg = pci_mem_addr + 0x70; + hpwdt_timer_con = pci_mem_addr + 0x72; + + /* Make sure that timer is disabled until /dev/watchdog is opened */ + hpwdt_stop(); + + /* Initialize NMI Decoding functionality */ + retval = hpwdt_init_nmi_decoding(dev); + if (retval != 0) + goto error_init_nmi_decoding; + + watchdog_set_nowayout(&hpwdt_dev, nowayout); + if (watchdog_init_timeout(&hpwdt_dev, soft_margin, NULL)) + dev_warn(&dev->dev, "Invalid soft_margin: %d.\n", soft_margin); + + hpwdt_dev.parent = &dev->dev; + retval = watchdog_register_device(&hpwdt_dev); + if (retval < 0) { + dev_err(&dev->dev, "watchdog register failed: %d.\n", retval); + goto error_wd_register; + } + + dev_info(&dev->dev, "HPE Watchdog Timer Driver: %s" + ", timer margin: %d seconds (nowayout=%d).\n", + HPWDT_VERSION, hpwdt_dev.timeout, nowayout); + + if (dev->subsystem_vendor == PCI_VENDOR_ID_HP_3PAR) + ilo5 = true; + + return 0; + +error_wd_register: + hpwdt_exit_nmi_decoding(); +error_init_nmi_decoding: + pci_iounmap(dev, pci_mem_addr); +error_pci_iomap: + pci_disable_device(dev); + return retval; +} + +static void hpwdt_exit(struct pci_dev *dev) +{ + if (!nowayout) + hpwdt_stop(); + + watchdog_unregister_device(&hpwdt_dev); + hpwdt_exit_nmi_decoding(); + pci_iounmap(dev, pci_mem_addr); + pci_disable_device(dev); +} + +static struct pci_driver hpwdt_driver = { + .name = "hpwdt", + .id_table = hpwdt_devices, + .probe = hpwdt_init_one, + .remove = hpwdt_exit, +}; + +MODULE_AUTHOR("Tom Mingarelli"); +MODULE_DESCRIPTION("hpe watchdog driver"); +MODULE_LICENSE("GPL"); +MODULE_VERSION(HPWDT_VERSION); + +module_param(soft_margin, int, 0); +MODULE_PARM_DESC(soft_margin, "Watchdog timeout in seconds"); + +module_param(nowayout, bool, 0); +MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); + +#ifdef CONFIG_HPWDT_NMI_DECODING +module_param(pretimeout, bool, 0); +MODULE_PARM_DESC(pretimeout, "Watchdog pretimeout enabled"); +#endif + +module_pci_driver(hpwdt_driver); diff --git a/drivers/watchdog/i6300esb.c b/drivers/watchdog/i6300esb.c new file mode 100644 index 000000000..950c71a8b --- /dev/null +++ b/drivers/watchdog/i6300esb.c @@ -0,0 +1,363 @@ +/* + * i6300esb: Watchdog timer driver for Intel 6300ESB chipset + * + * (c) Copyright 2004 Google Inc. + * (c) Copyright 2005 David Härdeman <david@2gen.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * based on i810-tco.c which is in turn based on softdog.c + * + * The timer is implemented in the following I/O controller hubs: + * (See the intel documentation on http://developer.intel.com.) + * 6300ESB chip : document number 300641-004 + * + * 2004YYZZ Ross Biro + * Initial version 0.01 + * 2004YYZZ Ross Biro + * Version 0.02 + * 20050210 David Härdeman <david@2gen.com> + * Ported driver to kernel 2.6 + * 20171016 Radu Rendec <rrendec@arista.com> + * Change driver to use the watchdog subsystem + * Add support for multiple 6300ESB devices + */ + +/* + * Includes, defines, variables, module parameters, ... + */ + +#include <linux/module.h> +#include <linux/types.h> +#include <linux/kernel.h> +#include <linux/fs.h> +#include <linux/mm.h> +#include <linux/miscdevice.h> +#include <linux/watchdog.h> +#include <linux/pci.h> +#include <linux/ioport.h> +#include <linux/uaccess.h> +#include <linux/io.h> + +/* Module and version information */ +#define ESB_MODULE_NAME "i6300ESB timer" + +/* PCI configuration registers */ +#define ESB_CONFIG_REG 0x60 /* Config register */ +#define ESB_LOCK_REG 0x68 /* WDT lock register */ + +/* Memory mapped registers */ +#define ESB_TIMER1_REG(w) ((w)->base + 0x00)/* Timer1 value after each reset */ +#define ESB_TIMER2_REG(w) ((w)->base + 0x04)/* Timer2 value after each reset */ +#define ESB_GINTSR_REG(w) ((w)->base + 0x08)/* General Interrupt Status Reg */ +#define ESB_RELOAD_REG(w) ((w)->base + 0x0c)/* Reload register */ + +/* Lock register bits */ +#define ESB_WDT_FUNC (0x01 << 2) /* Watchdog functionality */ +#define ESB_WDT_ENABLE (0x01 << 1) /* Enable WDT */ +#define ESB_WDT_LOCK (0x01 << 0) /* Lock (nowayout) */ + +/* Config register bits */ +#define ESB_WDT_REBOOT (0x01 << 5) /* Enable reboot on timeout */ +#define ESB_WDT_FREQ (0x01 << 2) /* Decrement frequency */ +#define ESB_WDT_INTTYPE (0x03 << 0) /* Interrupt type on timer1 timeout */ + +/* Reload register bits */ +#define ESB_WDT_TIMEOUT (0x01 << 9) /* Watchdog timed out */ +#define ESB_WDT_RELOAD (0x01 << 8) /* prevent timeout */ + +/* Magic constants */ +#define ESB_UNLOCK1 0x80 /* Step 1 to unlock reset registers */ +#define ESB_UNLOCK2 0x86 /* Step 2 to unlock reset registers */ + +/* module parameters */ +/* 30 sec default heartbeat (1 < heartbeat < 2*1023) */ +#define ESB_HEARTBEAT_MIN 1 +#define ESB_HEARTBEAT_MAX 2046 +#define ESB_HEARTBEAT_DEFAULT 30 +#define ESB_HEARTBEAT_RANGE __MODULE_STRING(ESB_HEARTBEAT_MIN) \ + "<heartbeat<" __MODULE_STRING(ESB_HEARTBEAT_MAX) +static int heartbeat; /* in seconds */ +module_param(heartbeat, int, 0); +MODULE_PARM_DESC(heartbeat, + "Watchdog heartbeat in seconds. (" ESB_HEARTBEAT_RANGE + ", default=" __MODULE_STRING(ESB_HEARTBEAT_DEFAULT) ")"); + +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); +MODULE_PARM_DESC(nowayout, + "Watchdog cannot be stopped once started (default=" + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); + +/* internal variables */ +struct esb_dev { + struct watchdog_device wdd; + void __iomem *base; + struct pci_dev *pdev; +}; + +#define to_esb_dev(wptr) container_of(wptr, struct esb_dev, wdd) + +/* + * Some i6300ESB specific functions + */ + +/* + * Prepare for reloading the timer by unlocking the proper registers. + * This is performed by first writing 0x80 followed by 0x86 to the + * reload register. After this the appropriate registers can be written + * to once before they need to be unlocked again. + */ +static inline void esb_unlock_registers(struct esb_dev *edev) +{ + writew(ESB_UNLOCK1, ESB_RELOAD_REG(edev)); + writew(ESB_UNLOCK2, ESB_RELOAD_REG(edev)); +} + +static int esb_timer_start(struct watchdog_device *wdd) +{ + struct esb_dev *edev = to_esb_dev(wdd); + int _wdd_nowayout = test_bit(WDOG_NO_WAY_OUT, &wdd->status); + u8 val; + + esb_unlock_registers(edev); + writew(ESB_WDT_RELOAD, ESB_RELOAD_REG(edev)); + /* Enable or Enable + Lock? */ + val = ESB_WDT_ENABLE | (_wdd_nowayout ? ESB_WDT_LOCK : 0x00); + pci_write_config_byte(edev->pdev, ESB_LOCK_REG, val); + return 0; +} + +static int esb_timer_stop(struct watchdog_device *wdd) +{ + struct esb_dev *edev = to_esb_dev(wdd); + u8 val; + + /* First, reset timers as suggested by the docs */ + esb_unlock_registers(edev); + writew(ESB_WDT_RELOAD, ESB_RELOAD_REG(edev)); + /* Then disable the WDT */ + pci_write_config_byte(edev->pdev, ESB_LOCK_REG, 0x0); + pci_read_config_byte(edev->pdev, ESB_LOCK_REG, &val); + + /* Returns 0 if the timer was disabled, non-zero otherwise */ + return val & ESB_WDT_ENABLE; +} + +static int esb_timer_keepalive(struct watchdog_device *wdd) +{ + struct esb_dev *edev = to_esb_dev(wdd); + + esb_unlock_registers(edev); + writew(ESB_WDT_RELOAD, ESB_RELOAD_REG(edev)); + /* FIXME: Do we need to flush anything here? */ + return 0; +} + +static int esb_timer_set_heartbeat(struct watchdog_device *wdd, + unsigned int time) +{ + struct esb_dev *edev = to_esb_dev(wdd); + u32 val; + + /* We shift by 9, so if we are passed a value of 1 sec, + * val will be 1 << 9 = 512, then write that to two + * timers => 2 * 512 = 1024 (which is decremented at 1KHz) + */ + val = time << 9; + + /* Write timer 1 */ + esb_unlock_registers(edev); + writel(val, ESB_TIMER1_REG(edev)); + + /* Write timer 2 */ + esb_unlock_registers(edev); + writel(val, ESB_TIMER2_REG(edev)); + + /* Reload */ + esb_unlock_registers(edev); + writew(ESB_WDT_RELOAD, ESB_RELOAD_REG(edev)); + + /* FIXME: Do we need to flush everything out? */ + + /* Done */ + wdd->timeout = time; + return 0; +} + +/* + * Watchdog Subsystem Interfaces + */ + +static struct watchdog_info esb_info = { + .identity = ESB_MODULE_NAME, + .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE, +}; + +static const struct watchdog_ops esb_ops = { + .owner = THIS_MODULE, + .start = esb_timer_start, + .stop = esb_timer_stop, + .set_timeout = esb_timer_set_heartbeat, + .ping = esb_timer_keepalive, +}; + +/* + * Data for PCI driver interface + */ +static const struct pci_device_id esb_pci_tbl[] = { + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_9), }, + { 0, }, /* End of list */ +}; +MODULE_DEVICE_TABLE(pci, esb_pci_tbl); + +/* + * Init & exit routines + */ + +static unsigned char esb_getdevice(struct esb_dev *edev) +{ + if (pci_enable_device(edev->pdev)) { + dev_err(&edev->pdev->dev, "failed to enable device\n"); + goto err_devput; + } + + if (pci_request_region(edev->pdev, 0, ESB_MODULE_NAME)) { + dev_err(&edev->pdev->dev, "failed to request region\n"); + goto err_disable; + } + + edev->base = pci_ioremap_bar(edev->pdev, 0); + if (edev->base == NULL) { + /* Something's wrong here, BASEADDR has to be set */ + dev_err(&edev->pdev->dev, "failed to get BASEADDR\n"); + goto err_release; + } + + /* Done */ + dev_set_drvdata(&edev->pdev->dev, edev); + return 1; + +err_release: + pci_release_region(edev->pdev, 0); +err_disable: + pci_disable_device(edev->pdev); +err_devput: + return 0; +} + +static void esb_initdevice(struct esb_dev *edev) +{ + u8 val1; + u16 val2; + + /* + * Config register: + * Bit 5 : 0 = Enable WDT_OUTPUT + * Bit 2 : 0 = set the timer frequency to the PCI clock + * divided by 2^15 (approx 1KHz). + * Bits 1:0 : 11 = WDT_INT_TYPE Disabled. + * The watchdog has two timers, it can be setup so that the + * expiry of timer1 results in an interrupt and the expiry of + * timer2 results in a reboot. We set it to not generate + * any interrupts as there is not much we can do with it + * right now. + */ + pci_write_config_word(edev->pdev, ESB_CONFIG_REG, 0x0003); + + /* Check that the WDT isn't already locked */ + pci_read_config_byte(edev->pdev, ESB_LOCK_REG, &val1); + if (val1 & ESB_WDT_LOCK) + dev_warn(&edev->pdev->dev, "nowayout already set\n"); + + /* Set the timer to watchdog mode and disable it for now */ + pci_write_config_byte(edev->pdev, ESB_LOCK_REG, 0x00); + + /* Check if the watchdog was previously triggered */ + esb_unlock_registers(edev); + val2 = readw(ESB_RELOAD_REG(edev)); + if (val2 & ESB_WDT_TIMEOUT) + edev->wdd.bootstatus = WDIOF_CARDRESET; + + /* Reset WDT_TIMEOUT flag and timers */ + esb_unlock_registers(edev); + writew((ESB_WDT_TIMEOUT | ESB_WDT_RELOAD), ESB_RELOAD_REG(edev)); + + /* And set the correct timeout value */ + esb_timer_set_heartbeat(&edev->wdd, edev->wdd.timeout); +} + +static int esb_probe(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + struct esb_dev *edev; + int ret; + + edev = devm_kzalloc(&pdev->dev, sizeof(*edev), GFP_KERNEL); + if (!edev) + return -ENOMEM; + + /* Check whether or not the hardware watchdog is there */ + edev->pdev = pdev; + if (!esb_getdevice(edev)) + return -ENODEV; + + /* Initialize the watchdog and make sure it does not run */ + edev->wdd.info = &esb_info; + edev->wdd.ops = &esb_ops; + edev->wdd.min_timeout = ESB_HEARTBEAT_MIN; + edev->wdd.max_timeout = ESB_HEARTBEAT_MAX; + edev->wdd.timeout = ESB_HEARTBEAT_DEFAULT; + if (watchdog_init_timeout(&edev->wdd, heartbeat, NULL)) + dev_info(&pdev->dev, + "heartbeat value must be " ESB_HEARTBEAT_RANGE + ", using %u\n", edev->wdd.timeout); + watchdog_set_nowayout(&edev->wdd, nowayout); + watchdog_stop_on_reboot(&edev->wdd); + watchdog_stop_on_unregister(&edev->wdd); + esb_initdevice(edev); + + /* Register the watchdog so that userspace has access to it */ + ret = watchdog_register_device(&edev->wdd); + if (ret != 0) { + dev_err(&pdev->dev, + "cannot register watchdog device (err=%d)\n", ret); + goto err_unmap; + } + dev_info(&pdev->dev, + "initialized (0x%p). heartbeat=%d sec (nowayout=%d)\n", + edev->base, edev->wdd.timeout, nowayout); + return 0; + +err_unmap: + iounmap(edev->base); + pci_release_region(edev->pdev, 0); + pci_disable_device(edev->pdev); + return ret; +} + +static void esb_remove(struct pci_dev *pdev) +{ + struct esb_dev *edev = dev_get_drvdata(&pdev->dev); + + watchdog_unregister_device(&edev->wdd); + iounmap(edev->base); + pci_release_region(edev->pdev, 0); + pci_disable_device(edev->pdev); +} + +static struct pci_driver esb_driver = { + .name = ESB_MODULE_NAME, + .id_table = esb_pci_tbl, + .probe = esb_probe, + .remove = esb_remove, +}; + +module_pci_driver(esb_driver); + +MODULE_AUTHOR("Ross Biro and David Härdeman"); +MODULE_DESCRIPTION("Watchdog driver for Intel 6300ESB chipsets"); +MODULE_LICENSE("GPL"); diff --git a/drivers/watchdog/iTCO_vendor.h b/drivers/watchdog/iTCO_vendor.h new file mode 100644 index 000000000..7b82a7c6e --- /dev/null +++ b/drivers/watchdog/iTCO_vendor.h @@ -0,0 +1,16 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* iTCO Vendor Specific Support hooks */ +#ifdef CONFIG_ITCO_VENDOR_SUPPORT +extern void iTCO_vendor_pre_start(struct resource *, unsigned int); +extern void iTCO_vendor_pre_stop(struct resource *); +extern void iTCO_vendor_pre_keepalive(struct resource *, unsigned int); +extern void iTCO_vendor_pre_set_heartbeat(unsigned int); +extern int iTCO_vendor_check_noreboot_on(void); +#else +#define iTCO_vendor_pre_start(acpibase, heartbeat) {} +#define iTCO_vendor_pre_stop(acpibase) {} +#define iTCO_vendor_pre_keepalive(acpibase, heartbeat) {} +#define iTCO_vendor_pre_set_heartbeat(heartbeat) {} +#define iTCO_vendor_check_noreboot_on() 1 + /* 1=check noreboot; 0=don't check */ +#endif diff --git a/drivers/watchdog/iTCO_vendor_support.c b/drivers/watchdog/iTCO_vendor_support.c new file mode 100644 index 000000000..b6b2f90b5 --- /dev/null +++ b/drivers/watchdog/iTCO_vendor_support.c @@ -0,0 +1,371 @@ +/* + * intel TCO vendor specific watchdog driver support + * + * (c) Copyright 2006-2009 Wim Van Sebroeck <wim@iguana.be>. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * Neither Wim Van Sebroeck nor Iguana vzw. admit liability nor + * provide warranty for any of this software. This material is + * provided "AS-IS" and at no charge. + */ + +/* + * Includes, defines, variables, module parameters, ... + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +/* Module and version information */ +#define DRV_NAME "iTCO_vendor_support" +#define DRV_VERSION "1.04" + +/* Includes */ +#include <linux/module.h> /* For module specific items */ +#include <linux/moduleparam.h> /* For new moduleparam's */ +#include <linux/types.h> /* For standard types (like size_t) */ +#include <linux/errno.h> /* For the -ENODEV/... values */ +#include <linux/kernel.h> /* For printk/panic/... */ +#include <linux/init.h> /* For __init/__exit/... */ +#include <linux/ioport.h> /* For io-port access */ +#include <linux/io.h> /* For inb/outb/... */ + +#include "iTCO_vendor.h" + +/* List of vendor support modes */ +/* SuperMicro Pentium 3 Era 370SSE+-OEM1/P3TSSE */ +#define SUPERMICRO_OLD_BOARD 1 +/* SuperMicro Pentium 4 / Xeon 4 / EMT64T Era Systems */ +#define SUPERMICRO_NEW_BOARD 2 +/* Broken BIOS */ +#define BROKEN_BIOS 911 + +static int vendorsupport; +module_param(vendorsupport, int, 0); +MODULE_PARM_DESC(vendorsupport, "iTCO vendor specific support mode, default=" + "0 (none), 1=SuperMicro Pent3, 2=SuperMicro Pent4+, " + "911=Broken SMI BIOS"); + +/* + * Vendor Specific Support + */ + +/* + * Vendor Support: 1 + * Board: Super Micro Computer Inc. 370SSE+-OEM1/P3TSSE + * iTCO chipset: ICH2 + * + * Code contributed by: R. Seretny <lkpatches@paypc.com> + * Documentation obtained by R. Seretny from SuperMicro Technical Support + * + * To enable Watchdog function: + * BIOS setup -> Power -> TCO Logic SMI Enable -> Within5Minutes + * This setting enables SMI to clear the watchdog expired flag. + * If BIOS or CPU fail which may cause SMI hang, then system will + * reboot. When application starts to use watchdog function, + * application has to take over the control from SMI. + * + * For P3TSSE, J36 jumper needs to be removed to enable the Watchdog + * function. + * + * Note: The system will reboot when Expire Flag is set TWICE. + * So, if the watchdog timer is 20 seconds, then the maximum hang + * time is about 40 seconds, and the minimum hang time is about + * 20.6 seconds. + */ + +static void supermicro_old_pre_start(struct resource *smires) +{ + unsigned long val32; + + /* Bit 13: TCO_EN -> 0 = Disables TCO logic generating an SMI# */ + val32 = inl(smires->start); + val32 &= 0xffffdfff; /* Turn off SMI clearing watchdog */ + outl(val32, smires->start); /* Needed to activate watchdog */ +} + +static void supermicro_old_pre_stop(struct resource *smires) +{ + unsigned long val32; + + /* Bit 13: TCO_EN -> 1 = Enables the TCO logic to generate SMI# */ + val32 = inl(smires->start); + val32 |= 0x00002000; /* Turn on SMI clearing watchdog */ + outl(val32, smires->start); /* Needed to deactivate watchdog */ +} + +/* + * Vendor Support: 2 + * Board: Super Micro Computer Inc. P4SBx, P4DPx + * iTCO chipset: ICH4 + * + * Code contributed by: R. Seretny <lkpatches@paypc.com> + * Documentation obtained by R. Seretny from SuperMicro Technical Support + * + * To enable Watchdog function: + * 1. BIOS + * For P4SBx: + * BIOS setup -> Advanced -> Integrated Peripherals -> Watch Dog Feature + * For P4DPx: + * BIOS setup -> Advanced -> I/O Device Configuration -> Watch Dog + * This setting enables or disables Watchdog function. When enabled, the + * default watchdog timer is set to be 5 minutes (about 4m35s). It is + * enough to load and run the OS. The application (service or driver) has + * to take over the control once OS is running up and before watchdog + * expires. + * + * 2. JUMPER + * For P4SBx: JP39 + * For P4DPx: JP37 + * This jumper is used for safety. Closed is enabled. This jumper + * prevents user enables watchdog in BIOS by accident. + * + * To enable Watch Dog function, both BIOS and JUMPER must be enabled. + * + * The documentation lists motherboards P4SBx and P4DPx series as of + * 20-March-2002. However, this code works flawlessly with much newer + * motherboards, such as my X6DHR-8G2 (SuperServer 6014H-82). + * + * The original iTCO driver as written does not actually reset the + * watchdog timer on these machines, as a result they reboot after five + * minutes. + * + * NOTE: You may leave the Watchdog function disabled in the SuperMicro + * BIOS to avoid a "boot-race"... This driver will enable watchdog + * functionality even if it's disabled in the BIOS once the /dev/watchdog + * file is opened. + */ + +/* I/O Port's */ +#define SM_REGINDEX 0x2e /* SuperMicro ICH4+ Register Index */ +#define SM_DATAIO 0x2f /* SuperMicro ICH4+ Register Data I/O */ + +/* Control Register's */ +#define SM_CTLPAGESW 0x07 /* SuperMicro ICH4+ Control Page Switch */ +#define SM_CTLPAGE 0x08 /* SuperMicro ICH4+ Control Page Num */ + +#define SM_WATCHENABLE 0x30 /* Watchdog enable: Bit 0: 0=off, 1=on */ + +#define SM_WATCHPAGE 0x87 /* Watchdog unlock control page */ + +#define SM_ENDWATCH 0xAA /* Watchdog lock control page */ + +#define SM_COUNTMODE 0xf5 /* Watchdog count mode select */ + /* (Bit 3: 0 = seconds, 1 = minutes */ + +#define SM_WATCHTIMER 0xf6 /* 8-bits, Watchdog timer counter (RW) */ + +#define SM_RESETCONTROL 0xf7 /* Watchdog reset control */ + /* Bit 6: timer is reset by kbd interrupt */ + /* Bit 7: timer is reset by mouse interrupt */ + +static void supermicro_new_unlock_watchdog(void) +{ + /* Write 0x87 to port 0x2e twice */ + outb(SM_WATCHPAGE, SM_REGINDEX); + outb(SM_WATCHPAGE, SM_REGINDEX); + /* Switch to watchdog control page */ + outb(SM_CTLPAGESW, SM_REGINDEX); + outb(SM_CTLPAGE, SM_DATAIO); +} + +static void supermicro_new_lock_watchdog(void) +{ + outb(SM_ENDWATCH, SM_REGINDEX); +} + +static void supermicro_new_pre_start(unsigned int heartbeat) +{ + unsigned int val; + + supermicro_new_unlock_watchdog(); + + /* Watchdog timer setting needs to be in seconds*/ + outb(SM_COUNTMODE, SM_REGINDEX); + val = inb(SM_DATAIO); + val &= 0xF7; + outb(val, SM_DATAIO); + + /* Write heartbeat interval to WDOG */ + outb(SM_WATCHTIMER, SM_REGINDEX); + outb((heartbeat & 255), SM_DATAIO); + + /* Make sure keyboard/mouse interrupts don't interfere */ + outb(SM_RESETCONTROL, SM_REGINDEX); + val = inb(SM_DATAIO); + val &= 0x3f; + outb(val, SM_DATAIO); + + /* enable watchdog by setting bit 0 of Watchdog Enable to 1 */ + outb(SM_WATCHENABLE, SM_REGINDEX); + val = inb(SM_DATAIO); + val |= 0x01; + outb(val, SM_DATAIO); + + supermicro_new_lock_watchdog(); +} + +static void supermicro_new_pre_stop(void) +{ + unsigned int val; + + supermicro_new_unlock_watchdog(); + + /* disable watchdog by setting bit 0 of Watchdog Enable to 0 */ + outb(SM_WATCHENABLE, SM_REGINDEX); + val = inb(SM_DATAIO); + val &= 0xFE; + outb(val, SM_DATAIO); + + supermicro_new_lock_watchdog(); +} + +static void supermicro_new_pre_set_heartbeat(unsigned int heartbeat) +{ + supermicro_new_unlock_watchdog(); + + /* reset watchdog timeout to heartveat value */ + outb(SM_WATCHTIMER, SM_REGINDEX); + outb((heartbeat & 255), SM_DATAIO); + + supermicro_new_lock_watchdog(); +} + +/* + * Vendor Support: 911 + * Board: Some Intel ICHx based motherboards + * iTCO chipset: ICH7+ + * + * Some Intel motherboards have a broken BIOS implementation: i.e. + * the SMI handler clear's the TIMEOUT bit in the TC01_STS register + * and does not reload the time. Thus the TCO watchdog does not reboot + * the system. + * + * These are the conclusions of Andriy Gapon <avg@icyb.net.ua> after + * debugging: the SMI handler is quite simple - it tests value in + * TCO1_CNT against 0x800, i.e. checks TCO_TMR_HLT. If the bit is set + * the handler goes into an infinite loop, apparently to allow the + * second timeout and reboot. Otherwise it simply clears TIMEOUT bit + * in TCO1_STS and that's it. + * So the logic seems to be reversed, because it is hard to see how + * TIMEOUT can get set to 1 and SMI generated when TCO_TMR_HLT is set + * (other than a transitional effect). + * + * The only fix found to get the motherboard(s) to reboot is to put + * the glb_smi_en bit to 0. This is a dirty hack that bypasses the + * broken code by disabling Global SMI. + * + * WARNING: globally disabling SMI could possibly lead to dramatic + * problems, especially on laptops! I.e. various ACPI things where + * SMI is used for communication between OS and firmware. + * + * Don't use this fix if you don't need to!!! + */ + +static void broken_bios_start(struct resource *smires) +{ + unsigned long val32; + + val32 = inl(smires->start); + /* Bit 13: TCO_EN -> 0 = Disables TCO logic generating an SMI# + Bit 0: GBL_SMI_EN -> 0 = No SMI# will be generated by ICH. */ + val32 &= 0xffffdffe; + outl(val32, smires->start); +} + +static void broken_bios_stop(struct resource *smires) +{ + unsigned long val32; + + val32 = inl(smires->start); + /* Bit 13: TCO_EN -> 1 = Enables TCO logic generating an SMI# + Bit 0: GBL_SMI_EN -> 1 = Turn global SMI on again. */ + val32 |= 0x00002001; + outl(val32, smires->start); +} + +/* + * Generic Support Functions + */ + +void iTCO_vendor_pre_start(struct resource *smires, + unsigned int heartbeat) +{ + switch (vendorsupport) { + case SUPERMICRO_OLD_BOARD: + supermicro_old_pre_start(smires); + break; + case SUPERMICRO_NEW_BOARD: + supermicro_new_pre_start(heartbeat); + break; + case BROKEN_BIOS: + broken_bios_start(smires); + break; + } +} +EXPORT_SYMBOL(iTCO_vendor_pre_start); + +void iTCO_vendor_pre_stop(struct resource *smires) +{ + switch (vendorsupport) { + case SUPERMICRO_OLD_BOARD: + supermicro_old_pre_stop(smires); + break; + case SUPERMICRO_NEW_BOARD: + supermicro_new_pre_stop(); + break; + case BROKEN_BIOS: + broken_bios_stop(smires); + break; + } +} +EXPORT_SYMBOL(iTCO_vendor_pre_stop); + +void iTCO_vendor_pre_keepalive(struct resource *smires, unsigned int heartbeat) +{ + if (vendorsupport == SUPERMICRO_NEW_BOARD) + supermicro_new_pre_set_heartbeat(heartbeat); +} +EXPORT_SYMBOL(iTCO_vendor_pre_keepalive); + +void iTCO_vendor_pre_set_heartbeat(unsigned int heartbeat) +{ + if (vendorsupport == SUPERMICRO_NEW_BOARD) + supermicro_new_pre_set_heartbeat(heartbeat); +} +EXPORT_SYMBOL(iTCO_vendor_pre_set_heartbeat); + +int iTCO_vendor_check_noreboot_on(void) +{ + switch (vendorsupport) { + case SUPERMICRO_OLD_BOARD: + return 0; + default: + return 1; + } +} +EXPORT_SYMBOL(iTCO_vendor_check_noreboot_on); + +static int __init iTCO_vendor_init_module(void) +{ + pr_info("vendor-support=%d\n", vendorsupport); + return 0; +} + +static void __exit iTCO_vendor_exit_module(void) +{ + pr_info("Module Unloaded\n"); +} + +module_init(iTCO_vendor_init_module); +module_exit(iTCO_vendor_exit_module); + +MODULE_AUTHOR("Wim Van Sebroeck <wim@iguana.be>, " + "R. Seretny <lkpatches@paypc.com>"); +MODULE_DESCRIPTION("Intel TCO Vendor Specific WatchDog Timer Driver Support"); +MODULE_VERSION(DRV_VERSION); +MODULE_LICENSE("GPL"); + diff --git a/drivers/watchdog/iTCO_wdt.c b/drivers/watchdog/iTCO_wdt.c new file mode 100644 index 000000000..347f0389b --- /dev/null +++ b/drivers/watchdog/iTCO_wdt.c @@ -0,0 +1,654 @@ +/* + * intel TCO Watchdog Driver + * + * (c) Copyright 2006-2011 Wim Van Sebroeck <wim@iguana.be>. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * Neither Wim Van Sebroeck nor Iguana vzw. admit liability nor + * provide warranty for any of this software. This material is + * provided "AS-IS" and at no charge. + * + * The TCO watchdog is implemented in the following I/O controller hubs: + * (See the intel documentation on http://developer.intel.com.) + * document number 290655-003, 290677-014: 82801AA (ICH), 82801AB (ICHO) + * document number 290687-002, 298242-027: 82801BA (ICH2) + * document number 290733-003, 290739-013: 82801CA (ICH3-S) + * document number 290716-001, 290718-007: 82801CAM (ICH3-M) + * document number 290744-001, 290745-025: 82801DB (ICH4) + * document number 252337-001, 252663-008: 82801DBM (ICH4-M) + * document number 273599-001, 273645-002: 82801E (C-ICH) + * document number 252516-001, 252517-028: 82801EB (ICH5), 82801ER (ICH5R) + * document number 300641-004, 300884-013: 6300ESB + * document number 301473-002, 301474-026: 82801F (ICH6) + * document number 313082-001, 313075-006: 631xESB, 632xESB + * document number 307013-003, 307014-024: 82801G (ICH7) + * document number 322896-001, 322897-001: NM10 + * document number 313056-003, 313057-017: 82801H (ICH8) + * document number 316972-004, 316973-012: 82801I (ICH9) + * document number 319973-002, 319974-002: 82801J (ICH10) + * document number 322169-001, 322170-003: 5 Series, 3400 Series (PCH) + * document number 320066-003, 320257-008: EP80597 (IICH) + * document number 324645-001, 324646-001: Cougar Point (CPT) + * document number TBD : Patsburg (PBG) + * document number TBD : DH89xxCC + * document number TBD : Panther Point + * document number TBD : Lynx Point + * document number TBD : Lynx Point-LP + */ + +/* + * Includes, defines, variables, module parameters, ... + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +/* Module and version information */ +#define DRV_NAME "iTCO_wdt" +#define DRV_VERSION "1.11" + +/* Includes */ +#include <linux/acpi.h> /* For ACPI support */ +#include <linux/module.h> /* For module specific items */ +#include <linux/moduleparam.h> /* For new moduleparam's */ +#include <linux/types.h> /* For standard types (like size_t) */ +#include <linux/errno.h> /* For the -ENODEV/... values */ +#include <linux/kernel.h> /* For printk/panic/... */ +#include <linux/watchdog.h> /* For the watchdog specific items */ +#include <linux/init.h> /* For __init/__exit/... */ +#include <linux/fs.h> /* For file operations */ +#include <linux/platform_device.h> /* For platform_driver framework */ +#include <linux/pci.h> /* For pci functions */ +#include <linux/ioport.h> /* For io-port access */ +#include <linux/spinlock.h> /* For spin_lock/spin_unlock/... */ +#include <linux/uaccess.h> /* For copy_to_user/put_user/... */ +#include <linux/io.h> /* For inb/outb/... */ +#include <linux/platform_data/itco_wdt.h> + +#include "iTCO_vendor.h" + +/* Address definitions for the TCO */ +/* TCO base address */ +#define TCOBASE(p) ((p)->tco_res->start) +/* SMI Control and Enable Register */ +#define SMI_EN(p) ((p)->smi_res->start) + +#define TCO_RLD(p) (TCOBASE(p) + 0x00) /* TCO Timer Reload/Curr. Value */ +#define TCOv1_TMR(p) (TCOBASE(p) + 0x01) /* TCOv1 Timer Initial Value*/ +#define TCO_DAT_IN(p) (TCOBASE(p) + 0x02) /* TCO Data In Register */ +#define TCO_DAT_OUT(p) (TCOBASE(p) + 0x03) /* TCO Data Out Register */ +#define TCO1_STS(p) (TCOBASE(p) + 0x04) /* TCO1 Status Register */ +#define TCO2_STS(p) (TCOBASE(p) + 0x06) /* TCO2 Status Register */ +#define TCO1_CNT(p) (TCOBASE(p) + 0x08) /* TCO1 Control Register */ +#define TCO2_CNT(p) (TCOBASE(p) + 0x0a) /* TCO2 Control Register */ +#define TCOv2_TMR(p) (TCOBASE(p) + 0x12) /* TCOv2 Timer Initial Value*/ + +/* internal variables */ +struct iTCO_wdt_private { + struct watchdog_device wddev; + + /* TCO version/generation */ + unsigned int iTCO_version; + struct resource *tco_res; + struct resource *smi_res; + /* + * NO_REBOOT flag is Memory-Mapped GCS register bit 5 (TCO version 2), + * or memory-mapped PMC register bit 4 (TCO version 3). + */ + struct resource *gcs_pmc_res; + unsigned long __iomem *gcs_pmc; + /* the lock for io operations */ + spinlock_t io_lock; + /* the PCI-device */ + struct pci_dev *pci_dev; + /* whether or not the watchdog has been suspended */ + bool suspended; + /* no reboot API private data */ + void *no_reboot_priv; + /* no reboot update function pointer */ + int (*update_no_reboot_bit)(void *p, bool set); +}; + +/* module parameters */ +#define WATCHDOG_TIMEOUT 30 /* 30 sec default heartbeat */ +static int heartbeat = WATCHDOG_TIMEOUT; /* in seconds */ +module_param(heartbeat, int, 0); +MODULE_PARM_DESC(heartbeat, "Watchdog timeout in seconds. " + "5..76 (TCO v1) or 3..614 (TCO v2), default=" + __MODULE_STRING(WATCHDOG_TIMEOUT) ")"); + +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); +MODULE_PARM_DESC(nowayout, + "Watchdog cannot be stopped once started (default=" + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); + +static int turn_SMI_watchdog_clear_off = 1; +module_param(turn_SMI_watchdog_clear_off, int, 0); +MODULE_PARM_DESC(turn_SMI_watchdog_clear_off, + "Turn off SMI clearing watchdog (depends on TCO-version)(default=1)"); + +/* + * Some TCO specific functions + */ + +/* + * The iTCO v1 and v2's internal timer is stored as ticks which decrement + * every 0.6 seconds. v3's internal timer is stored as seconds (some + * datasheets incorrectly state 0.6 seconds). + */ +static inline unsigned int seconds_to_ticks(struct iTCO_wdt_private *p, + int secs) +{ + return p->iTCO_version == 3 ? secs : (secs * 10) / 6; +} + +static inline unsigned int ticks_to_seconds(struct iTCO_wdt_private *p, + int ticks) +{ + return p->iTCO_version == 3 ? ticks : (ticks * 6) / 10; +} + +static inline u32 no_reboot_bit(struct iTCO_wdt_private *p) +{ + u32 enable_bit; + + switch (p->iTCO_version) { + case 5: + case 3: + enable_bit = 0x00000010; + break; + case 2: + enable_bit = 0x00000020; + break; + case 4: + case 1: + default: + enable_bit = 0x00000002; + break; + } + + return enable_bit; +} + +static int update_no_reboot_bit_def(void *priv, bool set) +{ + return 0; +} + +static int update_no_reboot_bit_pci(void *priv, bool set) +{ + struct iTCO_wdt_private *p = priv; + u32 val32 = 0, newval32 = 0; + + pci_read_config_dword(p->pci_dev, 0xd4, &val32); + if (set) + val32 |= no_reboot_bit(p); + else + val32 &= ~no_reboot_bit(p); + pci_write_config_dword(p->pci_dev, 0xd4, val32); + pci_read_config_dword(p->pci_dev, 0xd4, &newval32); + + /* make sure the update is successful */ + if (val32 != newval32) + return -EIO; + + return 0; +} + +static int update_no_reboot_bit_mem(void *priv, bool set) +{ + struct iTCO_wdt_private *p = priv; + u32 val32 = 0, newval32 = 0; + + val32 = readl(p->gcs_pmc); + if (set) + val32 |= no_reboot_bit(p); + else + val32 &= ~no_reboot_bit(p); + writel(val32, p->gcs_pmc); + newval32 = readl(p->gcs_pmc); + + /* make sure the update is successful */ + if (val32 != newval32) + return -EIO; + + return 0; +} + +static void iTCO_wdt_no_reboot_bit_setup(struct iTCO_wdt_private *p, + struct itco_wdt_platform_data *pdata) +{ + if (pdata->update_no_reboot_bit) { + p->update_no_reboot_bit = pdata->update_no_reboot_bit; + p->no_reboot_priv = pdata->no_reboot_priv; + return; + } + + if (p->iTCO_version >= 2) + p->update_no_reboot_bit = update_no_reboot_bit_mem; + else if (p->iTCO_version == 1) + p->update_no_reboot_bit = update_no_reboot_bit_pci; + else + p->update_no_reboot_bit = update_no_reboot_bit_def; + + p->no_reboot_priv = p; +} + +static int iTCO_wdt_start(struct watchdog_device *wd_dev) +{ + struct iTCO_wdt_private *p = watchdog_get_drvdata(wd_dev); + unsigned int val; + + spin_lock(&p->io_lock); + + iTCO_vendor_pre_start(p->smi_res, wd_dev->timeout); + + /* disable chipset's NO_REBOOT bit */ + if (p->update_no_reboot_bit(p->no_reboot_priv, false)) { + spin_unlock(&p->io_lock); + pr_err("failed to reset NO_REBOOT flag, reboot disabled by hardware/BIOS\n"); + return -EIO; + } + + /* Force the timer to its reload value by writing to the TCO_RLD + register */ + if (p->iTCO_version >= 2) + outw(0x01, TCO_RLD(p)); + else if (p->iTCO_version == 1) + outb(0x01, TCO_RLD(p)); + + /* Bit 11: TCO Timer Halt -> 0 = The TCO timer is enabled to count */ + val = inw(TCO1_CNT(p)); + val &= 0xf7ff; + outw(val, TCO1_CNT(p)); + val = inw(TCO1_CNT(p)); + spin_unlock(&p->io_lock); + + if (val & 0x0800) + return -1; + return 0; +} + +static int iTCO_wdt_stop(struct watchdog_device *wd_dev) +{ + struct iTCO_wdt_private *p = watchdog_get_drvdata(wd_dev); + unsigned int val; + + spin_lock(&p->io_lock); + + iTCO_vendor_pre_stop(p->smi_res); + + /* Bit 11: TCO Timer Halt -> 1 = The TCO timer is disabled */ + val = inw(TCO1_CNT(p)); + val |= 0x0800; + outw(val, TCO1_CNT(p)); + val = inw(TCO1_CNT(p)); + + /* Set the NO_REBOOT bit to prevent later reboots, just for sure */ + p->update_no_reboot_bit(p->no_reboot_priv, true); + + spin_unlock(&p->io_lock); + + if ((val & 0x0800) == 0) + return -1; + return 0; +} + +static int iTCO_wdt_ping(struct watchdog_device *wd_dev) +{ + struct iTCO_wdt_private *p = watchdog_get_drvdata(wd_dev); + + spin_lock(&p->io_lock); + + iTCO_vendor_pre_keepalive(p->smi_res, wd_dev->timeout); + + /* Reload the timer by writing to the TCO Timer Counter register */ + if (p->iTCO_version >= 2) { + outw(0x01, TCO_RLD(p)); + } else if (p->iTCO_version == 1) { + /* Reset the timeout status bit so that the timer + * needs to count down twice again before rebooting */ + outw(0x0008, TCO1_STS(p)); /* write 1 to clear bit */ + + outb(0x01, TCO_RLD(p)); + } + + spin_unlock(&p->io_lock); + return 0; +} + +static int iTCO_wdt_set_timeout(struct watchdog_device *wd_dev, unsigned int t) +{ + struct iTCO_wdt_private *p = watchdog_get_drvdata(wd_dev); + unsigned int val16; + unsigned char val8; + unsigned int tmrval; + + tmrval = seconds_to_ticks(p, t); + + /* For TCO v1 the timer counts down twice before rebooting */ + if (p->iTCO_version == 1) + tmrval /= 2; + + /* from the specs: */ + /* "Values of 0h-3h are ignored and should not be attempted" */ + if (tmrval < 0x04) + return -EINVAL; + if ((p->iTCO_version >= 2 && tmrval > 0x3ff) || + (p->iTCO_version == 1 && tmrval > 0x03f)) + return -EINVAL; + + iTCO_vendor_pre_set_heartbeat(tmrval); + + /* Write new heartbeat to watchdog */ + if (p->iTCO_version >= 2) { + spin_lock(&p->io_lock); + val16 = inw(TCOv2_TMR(p)); + val16 &= 0xfc00; + val16 |= tmrval; + outw(val16, TCOv2_TMR(p)); + val16 = inw(TCOv2_TMR(p)); + spin_unlock(&p->io_lock); + + if ((val16 & 0x3ff) != tmrval) + return -EINVAL; + } else if (p->iTCO_version == 1) { + spin_lock(&p->io_lock); + val8 = inb(TCOv1_TMR(p)); + val8 &= 0xc0; + val8 |= (tmrval & 0xff); + outb(val8, TCOv1_TMR(p)); + val8 = inb(TCOv1_TMR(p)); + spin_unlock(&p->io_lock); + + if ((val8 & 0x3f) != tmrval) + return -EINVAL; + } + + wd_dev->timeout = t; + return 0; +} + +static unsigned int iTCO_wdt_get_timeleft(struct watchdog_device *wd_dev) +{ + struct iTCO_wdt_private *p = watchdog_get_drvdata(wd_dev); + unsigned int val16; + unsigned char val8; + unsigned int time_left = 0; + + /* read the TCO Timer */ + if (p->iTCO_version >= 2) { + spin_lock(&p->io_lock); + val16 = inw(TCO_RLD(p)); + val16 &= 0x3ff; + spin_unlock(&p->io_lock); + + time_left = ticks_to_seconds(p, val16); + } else if (p->iTCO_version == 1) { + spin_lock(&p->io_lock); + val8 = inb(TCO_RLD(p)); + val8 &= 0x3f; + if (!(inw(TCO1_STS(p)) & 0x0008)) + val8 += (inb(TCOv1_TMR(p)) & 0x3f); + spin_unlock(&p->io_lock); + + time_left = ticks_to_seconds(p, val8); + } + return time_left; +} + +/* + * Kernel Interfaces + */ + +static const struct watchdog_info ident = { + .options = WDIOF_SETTIMEOUT | + WDIOF_KEEPALIVEPING | + WDIOF_MAGICCLOSE, + .firmware_version = 0, + .identity = DRV_NAME, +}; + +static const struct watchdog_ops iTCO_wdt_ops = { + .owner = THIS_MODULE, + .start = iTCO_wdt_start, + .stop = iTCO_wdt_stop, + .ping = iTCO_wdt_ping, + .set_timeout = iTCO_wdt_set_timeout, + .get_timeleft = iTCO_wdt_get_timeleft, +}; + +/* + * Init & exit routines + */ + +static int iTCO_wdt_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct itco_wdt_platform_data *pdata = dev_get_platdata(dev); + struct iTCO_wdt_private *p; + unsigned long val32; + int ret; + + if (!pdata) + return -ENODEV; + + p = devm_kzalloc(dev, sizeof(*p), GFP_KERNEL); + if (!p) + return -ENOMEM; + + spin_lock_init(&p->io_lock); + + p->tco_res = platform_get_resource(pdev, IORESOURCE_IO, ICH_RES_IO_TCO); + if (!p->tco_res) + return -ENODEV; + + p->smi_res = platform_get_resource(pdev, IORESOURCE_IO, ICH_RES_IO_SMI); + if (!p->smi_res) + return -ENODEV; + + p->iTCO_version = pdata->version; + p->pci_dev = to_pci_dev(dev->parent); + + iTCO_wdt_no_reboot_bit_setup(p, pdata); + + /* + * Get the Memory-Mapped GCS or PMC register, we need it for the + * NO_REBOOT flag (TCO v2 and v3). + */ + if (p->iTCO_version >= 2 && !pdata->update_no_reboot_bit) { + p->gcs_pmc_res = platform_get_resource(pdev, + IORESOURCE_MEM, + ICH_RES_MEM_GCS_PMC); + p->gcs_pmc = devm_ioremap_resource(dev, p->gcs_pmc_res); + if (IS_ERR(p->gcs_pmc)) + return PTR_ERR(p->gcs_pmc); + } + + /* Check chipset's NO_REBOOT bit */ + if (p->update_no_reboot_bit(p->no_reboot_priv, false) && + iTCO_vendor_check_noreboot_on()) { + pr_info("unable to reset NO_REBOOT flag, device disabled by hardware/BIOS\n"); + return -ENODEV; /* Cannot reset NO_REBOOT bit */ + } + + /* Set the NO_REBOOT bit to prevent later reboots, just for sure */ + p->update_no_reboot_bit(p->no_reboot_priv, true); + + /* The TCO logic uses the TCO_EN bit in the SMI_EN register */ + if (!devm_request_region(dev, p->smi_res->start, + resource_size(p->smi_res), + pdev->name)) { + pr_err("I/O address 0x%04llx already in use, device disabled\n", + (u64)SMI_EN(p)); + return -EBUSY; + } + if (turn_SMI_watchdog_clear_off >= p->iTCO_version) { + /* + * Bit 13: TCO_EN -> 0 + * Disables TCO logic generating an SMI# + */ + val32 = inl(SMI_EN(p)); + val32 &= 0xffffdfff; /* Turn off SMI clearing watchdog */ + outl(val32, SMI_EN(p)); + } + + if (!devm_request_region(dev, p->tco_res->start, + resource_size(p->tco_res), + pdev->name)) { + pr_err("I/O address 0x%04llx already in use, device disabled\n", + (u64)TCOBASE(p)); + return -EBUSY; + } + + pr_info("Found a %s TCO device (Version=%d, TCOBASE=0x%04llx)\n", + pdata->name, pdata->version, (u64)TCOBASE(p)); + + /* Clear out the (probably old) status */ + switch (p->iTCO_version) { + case 5: + case 4: + outw(0x0008, TCO1_STS(p)); /* Clear the Time Out Status bit */ + outw(0x0002, TCO2_STS(p)); /* Clear SECOND_TO_STS bit */ + break; + case 3: + outl(0x20008, TCO1_STS(p)); + break; + case 2: + case 1: + default: + outw(0x0008, TCO1_STS(p)); /* Clear the Time Out Status bit */ + outw(0x0002, TCO2_STS(p)); /* Clear SECOND_TO_STS bit */ + outw(0x0004, TCO2_STS(p)); /* Clear BOOT_STS bit */ + break; + } + + p->wddev.info = &ident, + p->wddev.ops = &iTCO_wdt_ops, + p->wddev.bootstatus = 0; + p->wddev.timeout = WATCHDOG_TIMEOUT; + watchdog_set_nowayout(&p->wddev, nowayout); + p->wddev.parent = dev; + + watchdog_set_drvdata(&p->wddev, p); + platform_set_drvdata(pdev, p); + + /* Make sure the watchdog is not running */ + iTCO_wdt_stop(&p->wddev); + + /* Check that the heartbeat value is within it's range; + if not reset to the default */ + if (iTCO_wdt_set_timeout(&p->wddev, heartbeat)) { + iTCO_wdt_set_timeout(&p->wddev, WATCHDOG_TIMEOUT); + pr_info("timeout value out of range, using %d\n", + WATCHDOG_TIMEOUT); + } + + watchdog_stop_on_reboot(&p->wddev); + ret = devm_watchdog_register_device(dev, &p->wddev); + if (ret != 0) { + pr_err("cannot register watchdog device (err=%d)\n", ret); + return ret; + } + + pr_info("initialized. heartbeat=%d sec (nowayout=%d)\n", + heartbeat, nowayout); + + return 0; +} + +static int iTCO_wdt_remove(struct platform_device *pdev) +{ + struct iTCO_wdt_private *p = platform_get_drvdata(pdev); + + /* Stop the timer before we leave */ + if (!nowayout) + iTCO_wdt_stop(&p->wddev); + + return 0; +} + +#ifdef CONFIG_PM_SLEEP +/* + * Suspend-to-idle requires this, because it stops the ticks and timekeeping, so + * the watchdog cannot be pinged while in that state. In ACPI sleep states the + * watchdog is stopped by the platform firmware. + */ + +#ifdef CONFIG_ACPI +static inline bool need_suspend(void) +{ + return acpi_target_system_state() == ACPI_STATE_S0; +} +#else +static inline bool need_suspend(void) { return true; } +#endif + +static int iTCO_wdt_suspend_noirq(struct device *dev) +{ + struct iTCO_wdt_private *p = dev_get_drvdata(dev); + int ret = 0; + + p->suspended = false; + if (watchdog_active(&p->wddev) && need_suspend()) { + ret = iTCO_wdt_stop(&p->wddev); + if (!ret) + p->suspended = true; + } + return ret; +} + +static int iTCO_wdt_resume_noirq(struct device *dev) +{ + struct iTCO_wdt_private *p = dev_get_drvdata(dev); + + if (p->suspended) + iTCO_wdt_start(&p->wddev); + + return 0; +} + +static const struct dev_pm_ops iTCO_wdt_pm = { + .suspend_noirq = iTCO_wdt_suspend_noirq, + .resume_noirq = iTCO_wdt_resume_noirq, +}; + +#define ITCO_WDT_PM_OPS (&iTCO_wdt_pm) +#else +#define ITCO_WDT_PM_OPS NULL +#endif /* CONFIG_PM_SLEEP */ + +static struct platform_driver iTCO_wdt_driver = { + .probe = iTCO_wdt_probe, + .remove = iTCO_wdt_remove, + .driver = { + .name = DRV_NAME, + .pm = ITCO_WDT_PM_OPS, + }, +}; + +static int __init iTCO_wdt_init_module(void) +{ + pr_info("Intel TCO WatchDog Timer Driver v%s\n", DRV_VERSION); + + return platform_driver_register(&iTCO_wdt_driver); +} + +static void __exit iTCO_wdt_cleanup_module(void) +{ + platform_driver_unregister(&iTCO_wdt_driver); + pr_info("Watchdog Module Unloaded\n"); +} + +module_init(iTCO_wdt_init_module); +module_exit(iTCO_wdt_cleanup_module); + +MODULE_AUTHOR("Wim Van Sebroeck <wim@iguana.be>"); +MODULE_DESCRIPTION("Intel TCO WatchDog Timer Driver"); +MODULE_VERSION(DRV_VERSION); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:" DRV_NAME); diff --git a/drivers/watchdog/ib700wdt.c b/drivers/watchdog/ib700wdt.c new file mode 100644 index 000000000..cc262284a --- /dev/null +++ b/drivers/watchdog/ib700wdt.c @@ -0,0 +1,382 @@ +/* + * IB700 Single Board Computer WDT driver + * + * (c) Copyright 2001 Charles Howes <chowes@vsol.net> + * + * Based on advantechwdt.c which is based on acquirewdt.c which + * is based on wdt.c. + * + * (c) Copyright 2000-2001 Marek Michalkiewicz <marekm@linux.org.pl> + * + * Based on acquirewdt.c which is based on wdt.c. + * Original copyright messages: + * + * (c) Copyright 1996 Alan Cox <alan@lxorguk.ukuu.org.uk>, + * All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * Neither Alan Cox nor CymruNet Ltd. admit liability nor provide + * warranty for any of this software. This material is provided + * "AS-IS" and at no charge. + * + * (c) Copyright 1995 Alan Cox <alan@lxorguk.ukuu.org.uk> + * + * 14-Dec-2001 Matt Domsch <Matt_Domsch@dell.com> + * Added nowayout module option to override CONFIG_WATCHDOG_NOWAYOUT + * Added timeout module option to override default + * + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/module.h> +#include <linux/types.h> +#include <linux/miscdevice.h> +#include <linux/watchdog.h> +#include <linux/ioport.h> +#include <linux/fs.h> +#include <linux/init.h> +#include <linux/spinlock.h> +#include <linux/moduleparam.h> +#include <linux/platform_device.h> +#include <linux/io.h> +#include <linux/uaccess.h> + + +static struct platform_device *ibwdt_platform_device; +static unsigned long ibwdt_is_open; +static DEFINE_SPINLOCK(ibwdt_lock); +static char expect_close; + +/* Module information */ +#define DRV_NAME "ib700wdt" + +/* + * + * Watchdog Timer Configuration + * + * The function of the watchdog timer is to reset the system + * automatically and is defined at I/O port 0443H. To enable the + * watchdog timer and allow the system to reset, write I/O port 0443H. + * To disable the timer, write I/O port 0441H for the system to stop the + * watchdog function. The timer has a tolerance of 20% for its + * intervals. + * + * The following describes how the timer should be programmed. + * + * Enabling Watchdog: + * MOV AX,000FH (Choose the values from 0 to F) + * MOV DX,0443H + * OUT DX,AX + * + * Disabling Watchdog: + * MOV AX,000FH (Any value is fine.) + * MOV DX,0441H + * OUT DX,AX + * + * Watchdog timer control table: + * Level Value Time/sec | Level Value Time/sec + * 1 F 0 | 9 7 16 + * 2 E 2 | 10 6 18 + * 3 D 4 | 11 5 20 + * 4 C 6 | 12 4 22 + * 5 B 8 | 13 3 24 + * 6 A 10 | 14 2 26 + * 7 9 12 | 15 1 28 + * 8 8 14 | 16 0 30 + * + */ + +#define WDT_STOP 0x441 +#define WDT_START 0x443 + +/* Default timeout */ +#define WATCHDOG_TIMEOUT 30 /* 30 seconds +/- 20% */ +static int timeout = WATCHDOG_TIMEOUT; /* in seconds */ +module_param(timeout, int, 0); +MODULE_PARM_DESC(timeout, + "Watchdog timeout in seconds. 0<= timeout <=30, default=" + __MODULE_STRING(WATCHDOG_TIMEOUT) "."); + +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); +MODULE_PARM_DESC(nowayout, + "Watchdog cannot be stopped once started (default=" + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); + + +/* + * Watchdog Operations + */ + +static void ibwdt_ping(void) +{ + int wd_margin = 15 - ((timeout + 1) / 2); + + spin_lock(&ibwdt_lock); + + /* Write a watchdog value */ + outb_p(wd_margin, WDT_START); + + spin_unlock(&ibwdt_lock); +} + +static void ibwdt_disable(void) +{ + spin_lock(&ibwdt_lock); + outb_p(0, WDT_STOP); + spin_unlock(&ibwdt_lock); +} + +static int ibwdt_set_heartbeat(int t) +{ + if (t < 0 || t > 30) + return -EINVAL; + + timeout = t; + return 0; +} + +/* + * /dev/watchdog handling + */ + +static ssize_t ibwdt_write(struct file *file, const char __user *buf, + size_t count, loff_t *ppos) +{ + if (count) { + if (!nowayout) { + size_t i; + + /* In case it was set long ago */ + expect_close = 0; + + for (i = 0; i != count; i++) { + char c; + if (get_user(c, buf + i)) + return -EFAULT; + if (c == 'V') + expect_close = 42; + } + } + ibwdt_ping(); + } + return count; +} + +static long ibwdt_ioctl(struct file *file, unsigned int cmd, unsigned long arg) +{ + int new_margin; + void __user *argp = (void __user *)arg; + int __user *p = argp; + + static const struct watchdog_info ident = { + .options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT + | WDIOF_MAGICCLOSE, + .firmware_version = 1, + .identity = "IB700 WDT", + }; + + switch (cmd) { + case WDIOC_GETSUPPORT: + if (copy_to_user(argp, &ident, sizeof(ident))) + return -EFAULT; + break; + + case WDIOC_GETSTATUS: + case WDIOC_GETBOOTSTATUS: + return put_user(0, p); + + case WDIOC_SETOPTIONS: + { + int options, retval = -EINVAL; + + if (get_user(options, p)) + return -EFAULT; + + if (options & WDIOS_DISABLECARD) { + ibwdt_disable(); + retval = 0; + } + if (options & WDIOS_ENABLECARD) { + ibwdt_ping(); + retval = 0; + } + return retval; + } + case WDIOC_KEEPALIVE: + ibwdt_ping(); + break; + + case WDIOC_SETTIMEOUT: + if (get_user(new_margin, p)) + return -EFAULT; + if (ibwdt_set_heartbeat(new_margin)) + return -EINVAL; + ibwdt_ping(); + /* fall through */ + + case WDIOC_GETTIMEOUT: + return put_user(timeout, p); + + default: + return -ENOTTY; + } + return 0; +} + +static int ibwdt_open(struct inode *inode, struct file *file) +{ + if (test_and_set_bit(0, &ibwdt_is_open)) + return -EBUSY; + if (nowayout) + __module_get(THIS_MODULE); + + /* Activate */ + ibwdt_ping(); + return nonseekable_open(inode, file); +} + +static int ibwdt_close(struct inode *inode, struct file *file) +{ + if (expect_close == 42) { + ibwdt_disable(); + } else { + pr_crit("WDT device closed unexpectedly. WDT will not stop!\n"); + ibwdt_ping(); + } + clear_bit(0, &ibwdt_is_open); + expect_close = 0; + return 0; +} + +/* + * Kernel Interfaces + */ + +static const struct file_operations ibwdt_fops = { + .owner = THIS_MODULE, + .llseek = no_llseek, + .write = ibwdt_write, + .unlocked_ioctl = ibwdt_ioctl, + .open = ibwdt_open, + .release = ibwdt_close, +}; + +static struct miscdevice ibwdt_miscdev = { + .minor = WATCHDOG_MINOR, + .name = "watchdog", + .fops = &ibwdt_fops, +}; + +/* + * Init & exit routines + */ + +static int __init ibwdt_probe(struct platform_device *dev) +{ + int res; + +#if WDT_START != WDT_STOP + if (!request_region(WDT_STOP, 1, "IB700 WDT")) { + pr_err("STOP method I/O %X is not available\n", WDT_STOP); + res = -EIO; + goto out_nostopreg; + } +#endif + + if (!request_region(WDT_START, 1, "IB700 WDT")) { + pr_err("START method I/O %X is not available\n", WDT_START); + res = -EIO; + goto out_nostartreg; + } + + /* Check that the heartbeat value is within it's range ; + * if not reset to the default */ + if (ibwdt_set_heartbeat(timeout)) { + ibwdt_set_heartbeat(WATCHDOG_TIMEOUT); + pr_info("timeout value must be 0<=x<=30, using %d\n", timeout); + } + + res = misc_register(&ibwdt_miscdev); + if (res) { + pr_err("failed to register misc device\n"); + goto out_nomisc; + } + return 0; + +out_nomisc: + release_region(WDT_START, 1); +out_nostartreg: +#if WDT_START != WDT_STOP + release_region(WDT_STOP, 1); +#endif +out_nostopreg: + return res; +} + +static int ibwdt_remove(struct platform_device *dev) +{ + misc_deregister(&ibwdt_miscdev); + release_region(WDT_START, 1); +#if WDT_START != WDT_STOP + release_region(WDT_STOP, 1); +#endif + return 0; +} + +static void ibwdt_shutdown(struct platform_device *dev) +{ + /* Turn the WDT off if we have a soft shutdown */ + ibwdt_disable(); +} + +static struct platform_driver ibwdt_driver = { + .remove = ibwdt_remove, + .shutdown = ibwdt_shutdown, + .driver = { + .name = DRV_NAME, + }, +}; + +static int __init ibwdt_init(void) +{ + int err; + + pr_info("WDT driver for IB700 single board computer initialising\n"); + + ibwdt_platform_device = platform_device_register_simple(DRV_NAME, + -1, NULL, 0); + if (IS_ERR(ibwdt_platform_device)) + return PTR_ERR(ibwdt_platform_device); + + err = platform_driver_probe(&ibwdt_driver, ibwdt_probe); + if (err) + goto unreg_platform_device; + + return 0; + +unreg_platform_device: + platform_device_unregister(ibwdt_platform_device); + return err; +} + +static void __exit ibwdt_exit(void) +{ + platform_device_unregister(ibwdt_platform_device); + platform_driver_unregister(&ibwdt_driver); + pr_info("Watchdog Module Unloaded\n"); +} + +module_init(ibwdt_init); +module_exit(ibwdt_exit); + +MODULE_AUTHOR("Charles Howes <chowes@vsol.net>"); +MODULE_DESCRIPTION("IB700 SBC watchdog driver"); +MODULE_LICENSE("GPL"); + +/* end of ib700wdt.c */ diff --git a/drivers/watchdog/ibmasr.c b/drivers/watchdog/ibmasr.c new file mode 100644 index 000000000..366b0474f --- /dev/null +++ b/drivers/watchdog/ibmasr.c @@ -0,0 +1,421 @@ +/* + * IBM Automatic Server Restart driver. + * + * Copyright (c) 2005 Andrey Panin <pazke@donpac.ru> + * + * Based on driver written by Pete Reynolds. + * Copyright (c) IBM Corporation, 1998-2004. + * + * This software may be used and distributed according to the terms + * of the GNU Public License, incorporated herein by reference. + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/fs.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/timer.h> +#include <linux/miscdevice.h> +#include <linux/watchdog.h> +#include <linux/dmi.h> +#include <linux/io.h> +#include <linux/uaccess.h> + + +enum { + ASMTYPE_UNKNOWN, + ASMTYPE_TOPAZ, + ASMTYPE_JASPER, + ASMTYPE_PEARL, + ASMTYPE_JUNIPER, + ASMTYPE_SPRUCE, +}; + +#define TOPAZ_ASR_REG_OFFSET 4 +#define TOPAZ_ASR_TOGGLE 0x40 +#define TOPAZ_ASR_DISABLE 0x80 + +/* PEARL ASR S/W REGISTER SUPERIO PORT ADDRESSES */ +#define PEARL_BASE 0xe04 +#define PEARL_WRITE 0xe06 +#define PEARL_READ 0xe07 + +#define PEARL_ASR_DISABLE_MASK 0x80 /* bit 7: disable = 1, enable = 0 */ +#define PEARL_ASR_TOGGLE_MASK 0x40 /* bit 6: 0, then 1, then 0 */ + +/* JASPER OFFSET FROM SIO BASE ADDR TO ASR S/W REGISTERS. */ +#define JASPER_ASR_REG_OFFSET 0x38 + +#define JASPER_ASR_DISABLE_MASK 0x01 /* bit 0: disable = 1, enable = 0 */ +#define JASPER_ASR_TOGGLE_MASK 0x02 /* bit 1: 0, then 1, then 0 */ + +#define JUNIPER_BASE_ADDRESS 0x54b /* Base address of Juniper ASR */ +#define JUNIPER_ASR_DISABLE_MASK 0x01 /* bit 0: disable = 1 enable = 0 */ +#define JUNIPER_ASR_TOGGLE_MASK 0x02 /* bit 1: 0, then 1, then 0 */ + +#define SPRUCE_BASE_ADDRESS 0x118e /* Base address of Spruce ASR */ +#define SPRUCE_ASR_DISABLE_MASK 0x01 /* bit 1: disable = 1 enable = 0 */ +#define SPRUCE_ASR_TOGGLE_MASK 0x02 /* bit 0: 0, then 1, then 0 */ + + +static bool nowayout = WATCHDOG_NOWAYOUT; + +static unsigned long asr_is_open; +static char asr_expect_close; + +static unsigned int asr_type, asr_base, asr_length; +static unsigned int asr_read_addr, asr_write_addr; +static unsigned char asr_toggle_mask, asr_disable_mask; +static DEFINE_SPINLOCK(asr_lock); + +static void __asr_toggle(void) +{ + unsigned char reg; + + reg = inb(asr_read_addr); + + outb(reg & ~asr_toggle_mask, asr_write_addr); + reg = inb(asr_read_addr); + + outb(reg | asr_toggle_mask, asr_write_addr); + reg = inb(asr_read_addr); + + outb(reg & ~asr_toggle_mask, asr_write_addr); + reg = inb(asr_read_addr); +} + +static void asr_toggle(void) +{ + spin_lock(&asr_lock); + __asr_toggle(); + spin_unlock(&asr_lock); +} + +static void asr_enable(void) +{ + unsigned char reg; + + spin_lock(&asr_lock); + if (asr_type == ASMTYPE_TOPAZ) { + /* asr_write_addr == asr_read_addr */ + reg = inb(asr_read_addr); + outb(reg & ~(TOPAZ_ASR_TOGGLE | TOPAZ_ASR_DISABLE), + asr_read_addr); + } else { + /* + * First make sure the hardware timer is reset by toggling + * ASR hardware timer line. + */ + __asr_toggle(); + + reg = inb(asr_read_addr); + outb(reg & ~asr_disable_mask, asr_write_addr); + } + reg = inb(asr_read_addr); + spin_unlock(&asr_lock); +} + +static void asr_disable(void) +{ + unsigned char reg; + + spin_lock(&asr_lock); + reg = inb(asr_read_addr); + + if (asr_type == ASMTYPE_TOPAZ) + /* asr_write_addr == asr_read_addr */ + outb(reg | TOPAZ_ASR_TOGGLE | TOPAZ_ASR_DISABLE, + asr_read_addr); + else { + outb(reg | asr_toggle_mask, asr_write_addr); + reg = inb(asr_read_addr); + + outb(reg | asr_disable_mask, asr_write_addr); + } + reg = inb(asr_read_addr); + spin_unlock(&asr_lock); +} + +static int __init asr_get_base_address(void) +{ + unsigned char low, high; + const char *type = ""; + + asr_length = 1; + + switch (asr_type) { + case ASMTYPE_TOPAZ: + /* SELECT SuperIO CHIP FOR QUERYING + (WRITE 0x07 TO BOTH 0x2E and 0x2F) */ + outb(0x07, 0x2e); + outb(0x07, 0x2f); + + /* SELECT AND READ THE HIGH-NIBBLE OF THE GPIO BASE ADDRESS */ + outb(0x60, 0x2e); + high = inb(0x2f); + + /* SELECT AND READ THE LOW-NIBBLE OF THE GPIO BASE ADDRESS */ + outb(0x61, 0x2e); + low = inb(0x2f); + + asr_base = (high << 16) | low; + asr_read_addr = asr_write_addr = + asr_base + TOPAZ_ASR_REG_OFFSET; + asr_length = 5; + + break; + + case ASMTYPE_JASPER: + type = "Jaspers "; +#if 0 + u32 r; + /* Suggested fix */ + pdev = pci_get_bus_and_slot(0, DEVFN(0x1f, 0)); + if (pdev == NULL) + return -ENODEV; + pci_read_config_dword(pdev, 0x58, &r); + asr_base = r & 0xFFFE; + pci_dev_put(pdev); +#else + /* FIXME: need to use pci_config_lock here, + but it's not exported */ + +/* spin_lock_irqsave(&pci_config_lock, flags);*/ + + /* Select the SuperIO chip in the PCI I/O port register */ + outl(0x8000f858, 0xcf8); + + /* BUS 0, Slot 1F, fnc 0, offset 58 */ + + /* + * Read the base address for the SuperIO chip. + * Only the lower 16 bits are valid, but the address is word + * aligned so the last bit must be masked off. + */ + asr_base = inl(0xcfc) & 0xfffe; + +/* spin_unlock_irqrestore(&pci_config_lock, flags);*/ +#endif + asr_read_addr = asr_write_addr = + asr_base + JASPER_ASR_REG_OFFSET; + asr_toggle_mask = JASPER_ASR_TOGGLE_MASK; + asr_disable_mask = JASPER_ASR_DISABLE_MASK; + asr_length = JASPER_ASR_REG_OFFSET + 1; + + break; + + case ASMTYPE_PEARL: + type = "Pearls "; + asr_base = PEARL_BASE; + asr_read_addr = PEARL_READ; + asr_write_addr = PEARL_WRITE; + asr_toggle_mask = PEARL_ASR_TOGGLE_MASK; + asr_disable_mask = PEARL_ASR_DISABLE_MASK; + asr_length = 4; + break; + + case ASMTYPE_JUNIPER: + type = "Junipers "; + asr_base = JUNIPER_BASE_ADDRESS; + asr_read_addr = asr_write_addr = asr_base; + asr_toggle_mask = JUNIPER_ASR_TOGGLE_MASK; + asr_disable_mask = JUNIPER_ASR_DISABLE_MASK; + break; + + case ASMTYPE_SPRUCE: + type = "Spruce's "; + asr_base = SPRUCE_BASE_ADDRESS; + asr_read_addr = asr_write_addr = asr_base; + asr_toggle_mask = SPRUCE_ASR_TOGGLE_MASK; + asr_disable_mask = SPRUCE_ASR_DISABLE_MASK; + break; + } + + if (!request_region(asr_base, asr_length, "ibmasr")) { + pr_err("address %#x already in use\n", asr_base); + return -EBUSY; + } + + pr_info("found %sASR @ addr %#x\n", type, asr_base); + + return 0; +} + + +static ssize_t asr_write(struct file *file, const char __user *buf, + size_t count, loff_t *ppos) +{ + if (count) { + if (!nowayout) { + size_t i; + + /* In case it was set long ago */ + asr_expect_close = 0; + + for (i = 0; i != count; i++) { + char c; + if (get_user(c, buf + i)) + return -EFAULT; + if (c == 'V') + asr_expect_close = 42; + } + } + asr_toggle(); + } + return count; +} + +static long asr_ioctl(struct file *file, unsigned int cmd, unsigned long arg) +{ + static const struct watchdog_info ident = { + .options = WDIOF_KEEPALIVEPING | + WDIOF_MAGICCLOSE, + .identity = "IBM ASR", + }; + void __user *argp = (void __user *)arg; + int __user *p = argp; + int heartbeat; + + switch (cmd) { + case WDIOC_GETSUPPORT: + return copy_to_user(argp, &ident, sizeof(ident)) ? -EFAULT : 0; + case WDIOC_GETSTATUS: + case WDIOC_GETBOOTSTATUS: + return put_user(0, p); + case WDIOC_SETOPTIONS: + { + int new_options, retval = -EINVAL; + if (get_user(new_options, p)) + return -EFAULT; + if (new_options & WDIOS_DISABLECARD) { + asr_disable(); + retval = 0; + } + if (new_options & WDIOS_ENABLECARD) { + asr_enable(); + asr_toggle(); + retval = 0; + } + return retval; + } + case WDIOC_KEEPALIVE: + asr_toggle(); + return 0; + /* + * The hardware has a fixed timeout value, so no WDIOC_SETTIMEOUT + * and WDIOC_GETTIMEOUT always returns 256. + */ + case WDIOC_GETTIMEOUT: + heartbeat = 256; + return put_user(heartbeat, p); + default: + return -ENOTTY; + } +} + +static int asr_open(struct inode *inode, struct file *file) +{ + if (test_and_set_bit(0, &asr_is_open)) + return -EBUSY; + + asr_toggle(); + asr_enable(); + + return nonseekable_open(inode, file); +} + +static int asr_release(struct inode *inode, struct file *file) +{ + if (asr_expect_close == 42) + asr_disable(); + else { + pr_crit("unexpected close, not stopping watchdog!\n"); + asr_toggle(); + } + clear_bit(0, &asr_is_open); + asr_expect_close = 0; + return 0; +} + +static const struct file_operations asr_fops = { + .owner = THIS_MODULE, + .llseek = no_llseek, + .write = asr_write, + .unlocked_ioctl = asr_ioctl, + .open = asr_open, + .release = asr_release, +}; + +static struct miscdevice asr_miscdev = { + .minor = WATCHDOG_MINOR, + .name = "watchdog", + .fops = &asr_fops, +}; + + +struct ibmasr_id { + const char *desc; + int type; +}; + +static struct ibmasr_id ibmasr_id_table[] __initdata = { + { "IBM Automatic Server Restart - eserver xSeries 220", ASMTYPE_TOPAZ }, + { "IBM Automatic Server Restart - Machine Type 8673", ASMTYPE_PEARL }, + { "IBM Automatic Server Restart - Machine Type 8480", ASMTYPE_JASPER }, + { "IBM Automatic Server Restart - Machine Type 8482", ASMTYPE_JUNIPER }, + { "IBM Automatic Server Restart - Machine Type 8648", ASMTYPE_SPRUCE }, + { NULL } +}; + +static int __init ibmasr_init(void) +{ + struct ibmasr_id *id; + int rc; + + for (id = ibmasr_id_table; id->desc; id++) { + if (dmi_find_device(DMI_DEV_TYPE_OTHER, id->desc, NULL)) { + asr_type = id->type; + break; + } + } + + if (!asr_type) + return -ENODEV; + + rc = asr_get_base_address(); + if (rc) + return rc; + + rc = misc_register(&asr_miscdev); + if (rc < 0) { + release_region(asr_base, asr_length); + pr_err("failed to register misc device\n"); + return rc; + } + + return 0; +} + +static void __exit ibmasr_exit(void) +{ + if (!nowayout) + asr_disable(); + + misc_deregister(&asr_miscdev); + + release_region(asr_base, asr_length); +} + +module_init(ibmasr_init); +module_exit(ibmasr_exit); + +module_param(nowayout, bool, 0); +MODULE_PARM_DESC(nowayout, + "Watchdog cannot be stopped once started (default=" + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); + +MODULE_DESCRIPTION("IBM Automatic Server Restart driver"); +MODULE_AUTHOR("Andrey Panin"); +MODULE_LICENSE("GPL"); diff --git a/drivers/watchdog/ie6xx_wdt.c b/drivers/watchdog/ie6xx_wdt.c new file mode 100644 index 000000000..78c2541f5 --- /dev/null +++ b/drivers/watchdog/ie6xx_wdt.c @@ -0,0 +1,346 @@ +/* + * Intel Atom E6xx Watchdog driver + * + * Copyright (C) 2011 Alexander Stein + * <alexander.stein@systec-electronic.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of version 2 of the GNU General + * Public License as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be + * useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR + * PURPOSE. See the GNU General Public License for more details. + * You should have received a copy of the GNU General Public + * License along with this program; if not, write to the Free + * Software Foundation, Inc., 59 Temple Place - Suite 330, + * Boston, MA 02111-1307, USA. + * The full GNU General Public License is included in this + * distribution in the file called COPYING. + * + */ + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/platform_device.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/watchdog.h> +#include <linux/seq_file.h> +#include <linux/debugfs.h> +#include <linux/uaccess.h> +#include <linux/spinlock.h> + +#define DRIVER_NAME "ie6xx_wdt" + +#define PV1 0x00 +#define PV2 0x04 + +#define RR0 0x0c +#define RR1 0x0d +#define WDT_RELOAD 0x01 +#define WDT_TOUT 0x02 + +#define WDTCR 0x10 +#define WDT_PRE_SEL 0x04 +#define WDT_RESET_SEL 0x08 +#define WDT_RESET_EN 0x10 +#define WDT_TOUT_EN 0x20 + +#define DCR 0x14 + +#define WDTLR 0x18 +#define WDT_LOCK 0x01 +#define WDT_ENABLE 0x02 +#define WDT_TOUT_CNF 0x03 + +#define MIN_TIME 1 +#define MAX_TIME (10 * 60) /* 10 minutes */ +#define DEFAULT_TIME 60 + +static unsigned int timeout = DEFAULT_TIME; +module_param(timeout, uint, 0); +MODULE_PARM_DESC(timeout, + "Default Watchdog timer setting (" + __MODULE_STRING(DEFAULT_TIME) "s)." + "The range is from 1 to 600"); + +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); +MODULE_PARM_DESC(nowayout, + "Watchdog cannot be stopped once started (default=" + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); + +static u8 resetmode = 0x10; +module_param(resetmode, byte, 0); +MODULE_PARM_DESC(resetmode, + "Resetmode bits: 0x08 warm reset (cold reset otherwise), " + "0x10 reset enable, 0x20 disable toggle GPIO[4] (default=0x10)"); + +static struct { + unsigned short sch_wdtba; + struct spinlock unlock_sequence; +#ifdef CONFIG_DEBUG_FS + struct dentry *debugfs; +#endif +} ie6xx_wdt_data; + +/* + * This is needed to write to preload and reload registers + * struct ie6xx_wdt_data.unlock_sequence must be used + * to prevent sequence interrupts + */ +static void ie6xx_wdt_unlock_registers(void) +{ + outb(0x80, ie6xx_wdt_data.sch_wdtba + RR0); + outb(0x86, ie6xx_wdt_data.sch_wdtba + RR0); +} + +static int ie6xx_wdt_ping(struct watchdog_device *wdd) +{ + spin_lock(&ie6xx_wdt_data.unlock_sequence); + ie6xx_wdt_unlock_registers(); + outb(WDT_RELOAD, ie6xx_wdt_data.sch_wdtba + RR1); + spin_unlock(&ie6xx_wdt_data.unlock_sequence); + return 0; +} + +static int ie6xx_wdt_set_timeout(struct watchdog_device *wdd, unsigned int t) +{ + u32 preload; + u64 clock; + u8 wdtcr; + + /* Watchdog clock is PCI Clock (33MHz) */ + clock = 33000000; + /* and the preload value is loaded into [34:15] of the down counter */ + preload = (t * clock) >> 15; + /* + * Manual states preload must be one less. + * Does not wrap as t is at least 1 + */ + preload -= 1; + + spin_lock(&ie6xx_wdt_data.unlock_sequence); + + /* Set ResetMode & Enable prescaler for range 10ms to 10 min */ + wdtcr = resetmode & 0x38; + outb(wdtcr, ie6xx_wdt_data.sch_wdtba + WDTCR); + + ie6xx_wdt_unlock_registers(); + outl(0, ie6xx_wdt_data.sch_wdtba + PV1); + + ie6xx_wdt_unlock_registers(); + outl(preload, ie6xx_wdt_data.sch_wdtba + PV2); + + ie6xx_wdt_unlock_registers(); + outb(WDT_RELOAD | WDT_TOUT, ie6xx_wdt_data.sch_wdtba + RR1); + + spin_unlock(&ie6xx_wdt_data.unlock_sequence); + + wdd->timeout = t; + return 0; +} + +static int ie6xx_wdt_start(struct watchdog_device *wdd) +{ + ie6xx_wdt_set_timeout(wdd, wdd->timeout); + + /* Enable the watchdog timer */ + spin_lock(&ie6xx_wdt_data.unlock_sequence); + outb(WDT_ENABLE, ie6xx_wdt_data.sch_wdtba + WDTLR); + spin_unlock(&ie6xx_wdt_data.unlock_sequence); + + return 0; +} + +static int ie6xx_wdt_stop(struct watchdog_device *wdd) +{ + if (inb(ie6xx_wdt_data.sch_wdtba + WDTLR) & WDT_LOCK) + return -1; + + /* Disable the watchdog timer */ + spin_lock(&ie6xx_wdt_data.unlock_sequence); + outb(0, ie6xx_wdt_data.sch_wdtba + WDTLR); + spin_unlock(&ie6xx_wdt_data.unlock_sequence); + + return 0; +} + +static const struct watchdog_info ie6xx_wdt_info = { + .identity = "Intel Atom E6xx Watchdog", + .options = WDIOF_SETTIMEOUT | + WDIOF_MAGICCLOSE | + WDIOF_KEEPALIVEPING, +}; + +static const struct watchdog_ops ie6xx_wdt_ops = { + .owner = THIS_MODULE, + .start = ie6xx_wdt_start, + .stop = ie6xx_wdt_stop, + .ping = ie6xx_wdt_ping, + .set_timeout = ie6xx_wdt_set_timeout, +}; + +static struct watchdog_device ie6xx_wdt_dev = { + .info = &ie6xx_wdt_info, + .ops = &ie6xx_wdt_ops, + .min_timeout = MIN_TIME, + .max_timeout = MAX_TIME, +}; + +#ifdef CONFIG_DEBUG_FS + +static int ie6xx_wdt_dbg_show(struct seq_file *s, void *unused) +{ + seq_printf(s, "PV1 = 0x%08x\n", + inl(ie6xx_wdt_data.sch_wdtba + PV1)); + seq_printf(s, "PV2 = 0x%08x\n", + inl(ie6xx_wdt_data.sch_wdtba + PV2)); + seq_printf(s, "RR = 0x%08x\n", + inw(ie6xx_wdt_data.sch_wdtba + RR0)); + seq_printf(s, "WDTCR = 0x%08x\n", + inw(ie6xx_wdt_data.sch_wdtba + WDTCR)); + seq_printf(s, "DCR = 0x%08x\n", + inl(ie6xx_wdt_data.sch_wdtba + DCR)); + seq_printf(s, "WDTLR = 0x%08x\n", + inw(ie6xx_wdt_data.sch_wdtba + WDTLR)); + + seq_printf(s, "\n"); + return 0; +} + +static int ie6xx_wdt_dbg_open(struct inode *inode, struct file *file) +{ + return single_open(file, ie6xx_wdt_dbg_show, NULL); +} + +static const struct file_operations ie6xx_wdt_dbg_operations = { + .open = ie6xx_wdt_dbg_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static void ie6xx_wdt_debugfs_init(void) +{ + /* /sys/kernel/debug/ie6xx_wdt */ + ie6xx_wdt_data.debugfs = debugfs_create_file("ie6xx_wdt", + S_IFREG | S_IRUGO, NULL, NULL, &ie6xx_wdt_dbg_operations); +} + +static void ie6xx_wdt_debugfs_exit(void) +{ + debugfs_remove(ie6xx_wdt_data.debugfs); +} + +#else +static void ie6xx_wdt_debugfs_init(void) +{ +} + +static void ie6xx_wdt_debugfs_exit(void) +{ +} +#endif + +static int ie6xx_wdt_probe(struct platform_device *pdev) +{ + struct resource *res; + u8 wdtlr; + int ret; + + res = platform_get_resource(pdev, IORESOURCE_IO, 0); + if (!res) + return -ENODEV; + + if (!request_region(res->start, resource_size(res), pdev->name)) { + dev_err(&pdev->dev, "Watchdog region 0x%llx already in use!\n", + (u64)res->start); + return -EBUSY; + } + + ie6xx_wdt_data.sch_wdtba = res->start; + dev_dbg(&pdev->dev, "WDT = 0x%X\n", ie6xx_wdt_data.sch_wdtba); + + ie6xx_wdt_dev.timeout = timeout; + watchdog_set_nowayout(&ie6xx_wdt_dev, nowayout); + ie6xx_wdt_dev.parent = &pdev->dev; + + spin_lock_init(&ie6xx_wdt_data.unlock_sequence); + + wdtlr = inb(ie6xx_wdt_data.sch_wdtba + WDTLR); + if (wdtlr & WDT_LOCK) + dev_warn(&pdev->dev, + "Watchdog Timer is Locked (Reg=0x%x)\n", wdtlr); + + ie6xx_wdt_debugfs_init(); + + ret = watchdog_register_device(&ie6xx_wdt_dev); + if (ret) { + dev_err(&pdev->dev, + "Watchdog timer: cannot register device (err =%d)\n", + ret); + goto misc_register_error; + } + + return 0; + +misc_register_error: + ie6xx_wdt_debugfs_exit(); + release_region(res->start, resource_size(res)); + ie6xx_wdt_data.sch_wdtba = 0; + return ret; +} + +static int ie6xx_wdt_remove(struct platform_device *pdev) +{ + struct resource *res; + + res = platform_get_resource(pdev, IORESOURCE_IO, 0); + ie6xx_wdt_stop(NULL); + watchdog_unregister_device(&ie6xx_wdt_dev); + ie6xx_wdt_debugfs_exit(); + release_region(res->start, resource_size(res)); + ie6xx_wdt_data.sch_wdtba = 0; + + return 0; +} + +static struct platform_driver ie6xx_wdt_driver = { + .probe = ie6xx_wdt_probe, + .remove = ie6xx_wdt_remove, + .driver = { + .name = DRIVER_NAME, + }, +}; + +static int __init ie6xx_wdt_init(void) +{ + /* Check boot parameters to verify that their initial values */ + /* are in range. */ + if ((timeout < MIN_TIME) || + (timeout > MAX_TIME)) { + pr_err("Watchdog timer: value of timeout %d (dec) " + "is out of range from %d to %d (dec)\n", + timeout, MIN_TIME, MAX_TIME); + return -EINVAL; + } + + return platform_driver_register(&ie6xx_wdt_driver); +} + +static void __exit ie6xx_wdt_exit(void) +{ + platform_driver_unregister(&ie6xx_wdt_driver); +} + +late_initcall(ie6xx_wdt_init); +module_exit(ie6xx_wdt_exit); + +MODULE_AUTHOR("Alexander Stein <alexander.stein@systec-electronic.com>"); +MODULE_DESCRIPTION("Intel Atom E6xx Watchdog Device Driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:" DRIVER_NAME); diff --git a/drivers/watchdog/imgpdc_wdt.c b/drivers/watchdog/imgpdc_wdt.c new file mode 100644 index 000000000..a3134ffa5 --- /dev/null +++ b/drivers/watchdog/imgpdc_wdt.c @@ -0,0 +1,340 @@ +/* + * Imagination Technologies PowerDown Controller Watchdog Timer. + * + * Copyright (c) 2014 Imagination Technologies Ltd. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * Based on drivers/watchdog/sunxi_wdt.c Copyright (c) 2013 Carlo Caione + * 2012 Henrik Nordstrom + * + * Notes + * ----- + * The timeout value is rounded to the next power of two clock cycles. + * This is configured using the PDC_WDT_CONFIG register, according to this + * formula: + * + * timeout = 2^(delay + 1) clock cycles + * + * Where 'delay' is the value written in PDC_WDT_CONFIG register. + * + * Therefore, the hardware only allows to program watchdog timeouts, expressed + * as a power of two number of watchdog clock cycles. The current implementation + * guarantees that the actual watchdog timeout will be _at least_ the value + * programmed in the imgpdg_wdt driver. + * + * The following table shows how the user-configured timeout relates + * to the actual hardware timeout (watchdog clock @ 40000 Hz): + * + * input timeout | WD_DELAY | actual timeout + * ----------------------------------- + * 10 | 18 | 13 seconds + * 20 | 19 | 26 seconds + * 30 | 20 | 52 seconds + * 60 | 21 | 104 seconds + * + * Albeit coarse, this granularity would suffice most watchdog uses. + * If the platform allows it, the user should be able to change the watchdog + * clock rate and achieve a finer timeout granularity. + */ + +#include <linux/clk.h> +#include <linux/io.h> +#include <linux/log2.h> +#include <linux/module.h> +#include <linux/mod_devicetable.h> +#include <linux/platform_device.h> +#include <linux/slab.h> +#include <linux/watchdog.h> + +/* registers */ +#define PDC_WDT_SOFT_RESET 0x00 +#define PDC_WDT_CONFIG 0x04 + #define PDC_WDT_CONFIG_ENABLE BIT(31) + #define PDC_WDT_CONFIG_DELAY_MASK 0x1f + +#define PDC_WDT_TICKLE1 0x08 +#define PDC_WDT_TICKLE1_MAGIC 0xabcd1234 +#define PDC_WDT_TICKLE2 0x0c +#define PDC_WDT_TICKLE2_MAGIC 0x4321dcba + +#define PDC_WDT_TICKLE_STATUS_MASK 0x7 +#define PDC_WDT_TICKLE_STATUS_SHIFT 0 +#define PDC_WDT_TICKLE_STATUS_HRESET 0x0 /* Hard reset */ +#define PDC_WDT_TICKLE_STATUS_TIMEOUT 0x1 /* Timeout */ +#define PDC_WDT_TICKLE_STATUS_TICKLE 0x2 /* Tickled incorrectly */ +#define PDC_WDT_TICKLE_STATUS_SRESET 0x3 /* Soft reset */ +#define PDC_WDT_TICKLE_STATUS_USER 0x4 /* User reset */ + +/* Timeout values are in seconds */ +#define PDC_WDT_MIN_TIMEOUT 1 +#define PDC_WDT_DEF_TIMEOUT 64 + +static int heartbeat; +module_param(heartbeat, int, 0); +MODULE_PARM_DESC(heartbeat, "Watchdog heartbeats in seconds " + "(default=" __MODULE_STRING(PDC_WDT_DEF_TIMEOUT) ")"); + +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); +MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started " + "(default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); + +struct pdc_wdt_dev { + struct watchdog_device wdt_dev; + struct clk *wdt_clk; + struct clk *sys_clk; + void __iomem *base; +}; + +static int pdc_wdt_keepalive(struct watchdog_device *wdt_dev) +{ + struct pdc_wdt_dev *wdt = watchdog_get_drvdata(wdt_dev); + + writel(PDC_WDT_TICKLE1_MAGIC, wdt->base + PDC_WDT_TICKLE1); + writel(PDC_WDT_TICKLE2_MAGIC, wdt->base + PDC_WDT_TICKLE2); + + return 0; +} + +static int pdc_wdt_stop(struct watchdog_device *wdt_dev) +{ + unsigned int val; + struct pdc_wdt_dev *wdt = watchdog_get_drvdata(wdt_dev); + + val = readl(wdt->base + PDC_WDT_CONFIG); + val &= ~PDC_WDT_CONFIG_ENABLE; + writel(val, wdt->base + PDC_WDT_CONFIG); + + /* Must tickle to finish the stop */ + pdc_wdt_keepalive(wdt_dev); + + return 0; +} + +static void __pdc_wdt_set_timeout(struct pdc_wdt_dev *wdt) +{ + unsigned long clk_rate = clk_get_rate(wdt->wdt_clk); + unsigned int val; + + val = readl(wdt->base + PDC_WDT_CONFIG) & ~PDC_WDT_CONFIG_DELAY_MASK; + val |= order_base_2(wdt->wdt_dev.timeout * clk_rate) - 1; + writel(val, wdt->base + PDC_WDT_CONFIG); +} + +static int pdc_wdt_set_timeout(struct watchdog_device *wdt_dev, + unsigned int new_timeout) +{ + struct pdc_wdt_dev *wdt = watchdog_get_drvdata(wdt_dev); + + wdt->wdt_dev.timeout = new_timeout; + + __pdc_wdt_set_timeout(wdt); + + return 0; +} + +/* Start the watchdog timer (delay should already be set) */ +static int pdc_wdt_start(struct watchdog_device *wdt_dev) +{ + unsigned int val; + struct pdc_wdt_dev *wdt = watchdog_get_drvdata(wdt_dev); + + __pdc_wdt_set_timeout(wdt); + + val = readl(wdt->base + PDC_WDT_CONFIG); + val |= PDC_WDT_CONFIG_ENABLE; + writel(val, wdt->base + PDC_WDT_CONFIG); + + return 0; +} + +static int pdc_wdt_restart(struct watchdog_device *wdt_dev, + unsigned long action, void *data) +{ + struct pdc_wdt_dev *wdt = watchdog_get_drvdata(wdt_dev); + + /* Assert SOFT_RESET */ + writel(0x1, wdt->base + PDC_WDT_SOFT_RESET); + + return 0; +} + +static const struct watchdog_info pdc_wdt_info = { + .identity = "IMG PDC Watchdog", + .options = WDIOF_SETTIMEOUT | + WDIOF_KEEPALIVEPING | + WDIOF_MAGICCLOSE, +}; + +static const struct watchdog_ops pdc_wdt_ops = { + .owner = THIS_MODULE, + .start = pdc_wdt_start, + .stop = pdc_wdt_stop, + .ping = pdc_wdt_keepalive, + .set_timeout = pdc_wdt_set_timeout, + .restart = pdc_wdt_restart, +}; + +static int pdc_wdt_probe(struct platform_device *pdev) +{ + u64 div; + int ret, val; + unsigned long clk_rate; + struct resource *res; + struct pdc_wdt_dev *pdc_wdt; + + pdc_wdt = devm_kzalloc(&pdev->dev, sizeof(*pdc_wdt), GFP_KERNEL); + if (!pdc_wdt) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + pdc_wdt->base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(pdc_wdt->base)) + return PTR_ERR(pdc_wdt->base); + + pdc_wdt->sys_clk = devm_clk_get(&pdev->dev, "sys"); + if (IS_ERR(pdc_wdt->sys_clk)) { + dev_err(&pdev->dev, "failed to get the sys clock\n"); + return PTR_ERR(pdc_wdt->sys_clk); + } + + pdc_wdt->wdt_clk = devm_clk_get(&pdev->dev, "wdt"); + if (IS_ERR(pdc_wdt->wdt_clk)) { + dev_err(&pdev->dev, "failed to get the wdt clock\n"); + return PTR_ERR(pdc_wdt->wdt_clk); + } + + ret = clk_prepare_enable(pdc_wdt->sys_clk); + if (ret) { + dev_err(&pdev->dev, "could not prepare or enable sys clock\n"); + return ret; + } + + ret = clk_prepare_enable(pdc_wdt->wdt_clk); + if (ret) { + dev_err(&pdev->dev, "could not prepare or enable wdt clock\n"); + goto disable_sys_clk; + } + + /* We use the clock rate to calculate the max timeout */ + clk_rate = clk_get_rate(pdc_wdt->wdt_clk); + if (clk_rate == 0) { + dev_err(&pdev->dev, "failed to get clock rate\n"); + ret = -EINVAL; + goto disable_wdt_clk; + } + + if (order_base_2(clk_rate) > PDC_WDT_CONFIG_DELAY_MASK + 1) { + dev_err(&pdev->dev, "invalid clock rate\n"); + ret = -EINVAL; + goto disable_wdt_clk; + } + + if (order_base_2(clk_rate) == 0) + pdc_wdt->wdt_dev.min_timeout = PDC_WDT_MIN_TIMEOUT + 1; + else + pdc_wdt->wdt_dev.min_timeout = PDC_WDT_MIN_TIMEOUT; + + pdc_wdt->wdt_dev.info = &pdc_wdt_info; + pdc_wdt->wdt_dev.ops = &pdc_wdt_ops; + + div = 1ULL << (PDC_WDT_CONFIG_DELAY_MASK + 1); + do_div(div, clk_rate); + pdc_wdt->wdt_dev.max_timeout = div; + pdc_wdt->wdt_dev.timeout = PDC_WDT_DEF_TIMEOUT; + pdc_wdt->wdt_dev.parent = &pdev->dev; + watchdog_set_drvdata(&pdc_wdt->wdt_dev, pdc_wdt); + + watchdog_init_timeout(&pdc_wdt->wdt_dev, heartbeat, &pdev->dev); + + pdc_wdt_stop(&pdc_wdt->wdt_dev); + + /* Find what caused the last reset */ + val = readl(pdc_wdt->base + PDC_WDT_TICKLE1); + val = (val & PDC_WDT_TICKLE_STATUS_MASK) >> PDC_WDT_TICKLE_STATUS_SHIFT; + switch (val) { + case PDC_WDT_TICKLE_STATUS_TICKLE: + case PDC_WDT_TICKLE_STATUS_TIMEOUT: + pdc_wdt->wdt_dev.bootstatus |= WDIOF_CARDRESET; + dev_info(&pdev->dev, + "watchdog module last reset due to timeout\n"); + break; + case PDC_WDT_TICKLE_STATUS_HRESET: + dev_info(&pdev->dev, + "watchdog module last reset due to hard reset\n"); + break; + case PDC_WDT_TICKLE_STATUS_SRESET: + dev_info(&pdev->dev, + "watchdog module last reset due to soft reset\n"); + break; + case PDC_WDT_TICKLE_STATUS_USER: + dev_info(&pdev->dev, + "watchdog module last reset due to user reset\n"); + break; + default: + dev_info(&pdev->dev, + "contains an illegal status code (%08x)\n", val); + break; + } + + watchdog_set_nowayout(&pdc_wdt->wdt_dev, nowayout); + watchdog_set_restart_priority(&pdc_wdt->wdt_dev, 128); + + platform_set_drvdata(pdev, pdc_wdt); + + ret = watchdog_register_device(&pdc_wdt->wdt_dev); + if (ret) + goto disable_wdt_clk; + + return 0; + +disable_wdt_clk: + clk_disable_unprepare(pdc_wdt->wdt_clk); +disable_sys_clk: + clk_disable_unprepare(pdc_wdt->sys_clk); + return ret; +} + +static void pdc_wdt_shutdown(struct platform_device *pdev) +{ + struct pdc_wdt_dev *pdc_wdt = platform_get_drvdata(pdev); + + pdc_wdt_stop(&pdc_wdt->wdt_dev); +} + +static int pdc_wdt_remove(struct platform_device *pdev) +{ + struct pdc_wdt_dev *pdc_wdt = platform_get_drvdata(pdev); + + pdc_wdt_stop(&pdc_wdt->wdt_dev); + watchdog_unregister_device(&pdc_wdt->wdt_dev); + clk_disable_unprepare(pdc_wdt->wdt_clk); + clk_disable_unprepare(pdc_wdt->sys_clk); + + return 0; +} + +static const struct of_device_id pdc_wdt_match[] = { + { .compatible = "img,pdc-wdt" }, + {} +}; +MODULE_DEVICE_TABLE(of, pdc_wdt_match); + +static struct platform_driver pdc_wdt_driver = { + .driver = { + .name = "imgpdc-wdt", + .of_match_table = pdc_wdt_match, + }, + .probe = pdc_wdt_probe, + .remove = pdc_wdt_remove, + .shutdown = pdc_wdt_shutdown, +}; +module_platform_driver(pdc_wdt_driver); + +MODULE_AUTHOR("Jude Abraham <Jude.Abraham@imgtec.com>"); +MODULE_AUTHOR("Naidu Tellapati <Naidu.Tellapati@imgtec.com>"); +MODULE_DESCRIPTION("Imagination Technologies PDC Watchdog Timer Driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/watchdog/imx2_wdt.c b/drivers/watchdog/imx2_wdt.c new file mode 100644 index 000000000..9f3123b04 --- /dev/null +++ b/drivers/watchdog/imx2_wdt.c @@ -0,0 +1,440 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Watchdog driver for IMX2 and later processors + * + * Copyright (C) 2010 Wolfram Sang, Pengutronix e.K. <w.sang@pengutronix.de> + * Copyright (C) 2014 Freescale Semiconductor, Inc. + * + * some parts adapted by similar drivers from Darius Augulis and Vladimir + * Zapolskiy, additional improvements by Wim Van Sebroeck. + * + * NOTE: MX1 has a slightly different Watchdog than MX2 and later: + * + * MX1: MX2+: + * ---- ----- + * Registers: 32-bit 16-bit + * Stopable timer: Yes No + * Need to enable clk: No Yes + * Halt on suspend: Manual Can be automatic + */ + +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/of_address.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> +#include <linux/watchdog.h> + +#define DRIVER_NAME "imx2-wdt" + +#define IMX2_WDT_WCR 0x00 /* Control Register */ +#define IMX2_WDT_WCR_WT (0xFF << 8) /* -> Watchdog Timeout Field */ +#define IMX2_WDT_WCR_WDA BIT(5) /* -> External Reset WDOG_B */ +#define IMX2_WDT_WCR_SRS BIT(4) /* -> Software Reset Signal */ +#define IMX2_WDT_WCR_WRE BIT(3) /* -> WDOG Reset Enable */ +#define IMX2_WDT_WCR_WDE BIT(2) /* -> Watchdog Enable */ +#define IMX2_WDT_WCR_WDZST BIT(0) /* -> Watchdog timer Suspend */ + +#define IMX2_WDT_WSR 0x02 /* Service Register */ +#define IMX2_WDT_SEQ1 0x5555 /* -> service sequence 1 */ +#define IMX2_WDT_SEQ2 0xAAAA /* -> service sequence 2 */ + +#define IMX2_WDT_WRSR 0x04 /* Reset Status Register */ +#define IMX2_WDT_WRSR_TOUT BIT(1) /* -> Reset due to Timeout */ + +#define IMX2_WDT_WICR 0x06 /* Interrupt Control Register */ +#define IMX2_WDT_WICR_WIE BIT(15) /* -> Interrupt Enable */ +#define IMX2_WDT_WICR_WTIS BIT(14) /* -> Interrupt Status */ +#define IMX2_WDT_WICR_WICT 0xFF /* -> Interrupt Count Timeout */ + +#define IMX2_WDT_WMCR 0x08 /* Misc Register */ + +#define IMX2_WDT_MAX_TIME 128U +#define IMX2_WDT_DEFAULT_TIME 60 /* in seconds */ + +#define WDOG_SEC_TO_COUNT(s) ((s * 2 - 1) << 8) + +struct imx2_wdt_device { + struct clk *clk; + struct regmap *regmap; + struct watchdog_device wdog; + bool ext_reset; +}; + +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); +MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); + + +static unsigned timeout; +module_param(timeout, uint, 0); +MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds (default=" + __MODULE_STRING(IMX2_WDT_DEFAULT_TIME) ")"); + +static const struct watchdog_info imx2_wdt_info = { + .identity = "imx2+ watchdog", + .options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE, +}; + +static const struct watchdog_info imx2_wdt_pretimeout_info = { + .identity = "imx2+ watchdog", + .options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE | + WDIOF_PRETIMEOUT, +}; + +static int imx2_wdt_restart(struct watchdog_device *wdog, unsigned long action, + void *data) +{ + struct imx2_wdt_device *wdev = watchdog_get_drvdata(wdog); + unsigned int wcr_enable = IMX2_WDT_WCR_WDE; + + /* Use internal reset or external - not both */ + if (wdev->ext_reset) + wcr_enable |= IMX2_WDT_WCR_SRS; /* do not assert int reset */ + else + wcr_enable |= IMX2_WDT_WCR_WDA; /* do not assert ext-reset */ + + /* Assert SRS signal */ + regmap_write(wdev->regmap, IMX2_WDT_WCR, wcr_enable); + /* + * Due to imx6q errata ERR004346 (WDOG: WDOG SRS bit requires to be + * written twice), we add another two writes to ensure there must be at + * least two writes happen in the same one 32kHz clock period. We save + * the target check here, since the writes shouldn't be a huge burden + * for other platforms. + */ + regmap_write(wdev->regmap, IMX2_WDT_WCR, wcr_enable); + regmap_write(wdev->regmap, IMX2_WDT_WCR, wcr_enable); + + /* wait for reset to assert... */ + mdelay(500); + + return 0; +} + +static inline void imx2_wdt_setup(struct watchdog_device *wdog) +{ + struct imx2_wdt_device *wdev = watchdog_get_drvdata(wdog); + u32 val; + + regmap_read(wdev->regmap, IMX2_WDT_WCR, &val); + + /* Suspend timer in low power mode, write once-only */ + val |= IMX2_WDT_WCR_WDZST; + /* Strip the old watchdog Time-Out value */ + val &= ~IMX2_WDT_WCR_WT; + /* Generate internal chip-level reset if WDOG times out */ + if (!wdev->ext_reset) + val &= ~IMX2_WDT_WCR_WRE; + /* Or if external-reset assert WDOG_B reset only on time-out */ + else + val |= IMX2_WDT_WCR_WRE; + /* Keep Watchdog Disabled */ + val &= ~IMX2_WDT_WCR_WDE; + /* Set the watchdog's Time-Out value */ + val |= WDOG_SEC_TO_COUNT(wdog->timeout); + + regmap_write(wdev->regmap, IMX2_WDT_WCR, val); + + /* enable the watchdog */ + val |= IMX2_WDT_WCR_WDE; + regmap_write(wdev->regmap, IMX2_WDT_WCR, val); +} + +static inline bool imx2_wdt_is_running(struct imx2_wdt_device *wdev) +{ + u32 val; + + regmap_read(wdev->regmap, IMX2_WDT_WCR, &val); + + return val & IMX2_WDT_WCR_WDE; +} + +static int imx2_wdt_ping(struct watchdog_device *wdog) +{ + struct imx2_wdt_device *wdev = watchdog_get_drvdata(wdog); + + regmap_write(wdev->regmap, IMX2_WDT_WSR, IMX2_WDT_SEQ1); + regmap_write(wdev->regmap, IMX2_WDT_WSR, IMX2_WDT_SEQ2); + return 0; +} + +static void __imx2_wdt_set_timeout(struct watchdog_device *wdog, + unsigned int new_timeout) +{ + struct imx2_wdt_device *wdev = watchdog_get_drvdata(wdog); + + regmap_update_bits(wdev->regmap, IMX2_WDT_WCR, IMX2_WDT_WCR_WT, + WDOG_SEC_TO_COUNT(new_timeout)); +} + +static int imx2_wdt_set_timeout(struct watchdog_device *wdog, + unsigned int new_timeout) +{ + unsigned int actual; + + actual = min(new_timeout, IMX2_WDT_MAX_TIME); + __imx2_wdt_set_timeout(wdog, actual); + wdog->timeout = new_timeout; + return 0; +} + +static int imx2_wdt_set_pretimeout(struct watchdog_device *wdog, + unsigned int new_pretimeout) +{ + struct imx2_wdt_device *wdev = watchdog_get_drvdata(wdog); + + if (new_pretimeout >= IMX2_WDT_MAX_TIME) + return -EINVAL; + + wdog->pretimeout = new_pretimeout; + + regmap_update_bits(wdev->regmap, IMX2_WDT_WICR, + IMX2_WDT_WICR_WIE | IMX2_WDT_WICR_WICT, + IMX2_WDT_WICR_WIE | (new_pretimeout << 1)); + return 0; +} + +static irqreturn_t imx2_wdt_isr(int irq, void *wdog_arg) +{ + struct watchdog_device *wdog = wdog_arg; + struct imx2_wdt_device *wdev = watchdog_get_drvdata(wdog); + + regmap_write_bits(wdev->regmap, IMX2_WDT_WICR, + IMX2_WDT_WICR_WTIS, IMX2_WDT_WICR_WTIS); + + watchdog_notify_pretimeout(wdog); + + return IRQ_HANDLED; +} + +static int imx2_wdt_start(struct watchdog_device *wdog) +{ + struct imx2_wdt_device *wdev = watchdog_get_drvdata(wdog); + + if (imx2_wdt_is_running(wdev)) + imx2_wdt_set_timeout(wdog, wdog->timeout); + else + imx2_wdt_setup(wdog); + + set_bit(WDOG_HW_RUNNING, &wdog->status); + + return imx2_wdt_ping(wdog); +} + +static const struct watchdog_ops imx2_wdt_ops = { + .owner = THIS_MODULE, + .start = imx2_wdt_start, + .ping = imx2_wdt_ping, + .set_timeout = imx2_wdt_set_timeout, + .set_pretimeout = imx2_wdt_set_pretimeout, + .restart = imx2_wdt_restart, +}; + +static const struct regmap_config imx2_wdt_regmap_config = { + .reg_bits = 16, + .reg_stride = 2, + .val_bits = 16, + .max_register = 0x8, +}; + +static int __init imx2_wdt_probe(struct platform_device *pdev) +{ + struct imx2_wdt_device *wdev; + struct watchdog_device *wdog; + struct resource *res; + void __iomem *base; + int ret; + u32 val; + + wdev = devm_kzalloc(&pdev->dev, sizeof(*wdev), GFP_KERNEL); + if (!wdev) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(base)) + return PTR_ERR(base); + + wdev->regmap = devm_regmap_init_mmio_clk(&pdev->dev, NULL, base, + &imx2_wdt_regmap_config); + if (IS_ERR(wdev->regmap)) { + dev_err(&pdev->dev, "regmap init failed\n"); + return PTR_ERR(wdev->regmap); + } + + wdev->clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(wdev->clk)) { + dev_err(&pdev->dev, "can't get Watchdog clock\n"); + return PTR_ERR(wdev->clk); + } + + wdog = &wdev->wdog; + wdog->info = &imx2_wdt_info; + wdog->ops = &imx2_wdt_ops; + wdog->min_timeout = 1; + wdog->timeout = IMX2_WDT_DEFAULT_TIME; + wdog->max_hw_heartbeat_ms = IMX2_WDT_MAX_TIME * 1000; + wdog->parent = &pdev->dev; + + ret = platform_get_irq(pdev, 0); + if (ret > 0) + if (!devm_request_irq(&pdev->dev, ret, imx2_wdt_isr, 0, + dev_name(&pdev->dev), wdog)) + wdog->info = &imx2_wdt_pretimeout_info; + + ret = clk_prepare_enable(wdev->clk); + if (ret) + return ret; + + regmap_read(wdev->regmap, IMX2_WDT_WRSR, &val); + wdog->bootstatus = val & IMX2_WDT_WRSR_TOUT ? WDIOF_CARDRESET : 0; + + wdev->ext_reset = of_property_read_bool(pdev->dev.of_node, + "fsl,ext-reset-output"); + platform_set_drvdata(pdev, wdog); + watchdog_set_drvdata(wdog, wdev); + watchdog_set_nowayout(wdog, nowayout); + watchdog_set_restart_priority(wdog, 128); + watchdog_init_timeout(wdog, timeout, &pdev->dev); + + if (imx2_wdt_is_running(wdev)) { + imx2_wdt_set_timeout(wdog, wdog->timeout); + set_bit(WDOG_HW_RUNNING, &wdog->status); + } + + /* + * Disable the watchdog power down counter at boot. Otherwise the power + * down counter will pull down the #WDOG interrupt line for one clock + * cycle. + */ + regmap_write(wdev->regmap, IMX2_WDT_WMCR, 0); + + ret = watchdog_register_device(wdog); + if (ret) { + dev_err(&pdev->dev, "cannot register watchdog device\n"); + goto disable_clk; + } + + dev_info(&pdev->dev, "timeout %d sec (nowayout=%d)\n", + wdog->timeout, nowayout); + + return 0; + +disable_clk: + clk_disable_unprepare(wdev->clk); + return ret; +} + +static int __exit imx2_wdt_remove(struct platform_device *pdev) +{ + struct watchdog_device *wdog = platform_get_drvdata(pdev); + struct imx2_wdt_device *wdev = watchdog_get_drvdata(wdog); + + watchdog_unregister_device(wdog); + + if (imx2_wdt_is_running(wdev)) { + imx2_wdt_ping(wdog); + dev_crit(&pdev->dev, "Device removed: Expect reboot!\n"); + } + return 0; +} + +static void imx2_wdt_shutdown(struct platform_device *pdev) +{ + struct watchdog_device *wdog = platform_get_drvdata(pdev); + struct imx2_wdt_device *wdev = watchdog_get_drvdata(wdog); + + if (imx2_wdt_is_running(wdev)) { + /* + * We are running, configure max timeout before reboot + * will take place. + */ + imx2_wdt_set_timeout(wdog, IMX2_WDT_MAX_TIME); + imx2_wdt_ping(wdog); + dev_crit(&pdev->dev, "Device shutdown: Expect reboot!\n"); + } +} + +#ifdef CONFIG_PM_SLEEP +/* Disable watchdog if it is active or non-active but still running */ +static int imx2_wdt_suspend(struct device *dev) +{ + struct watchdog_device *wdog = dev_get_drvdata(dev); + struct imx2_wdt_device *wdev = watchdog_get_drvdata(wdog); + + /* The watchdog IP block is running */ + if (imx2_wdt_is_running(wdev)) { + /* + * Don't update wdog->timeout, we'll restore the current value + * during resume. + */ + __imx2_wdt_set_timeout(wdog, IMX2_WDT_MAX_TIME); + imx2_wdt_ping(wdog); + } + + clk_disable_unprepare(wdev->clk); + + return 0; +} + +/* Enable watchdog and configure it if necessary */ +static int imx2_wdt_resume(struct device *dev) +{ + struct watchdog_device *wdog = dev_get_drvdata(dev); + struct imx2_wdt_device *wdev = watchdog_get_drvdata(wdog); + int ret; + + ret = clk_prepare_enable(wdev->clk); + if (ret) + return ret; + + if (watchdog_active(wdog) && !imx2_wdt_is_running(wdev)) { + /* + * If the watchdog is still active and resumes + * from deep sleep state, need to restart the + * watchdog again. + */ + imx2_wdt_setup(wdog); + } + if (imx2_wdt_is_running(wdev)) { + imx2_wdt_set_timeout(wdog, wdog->timeout); + imx2_wdt_ping(wdog); + } + + return 0; +} +#endif + +static SIMPLE_DEV_PM_OPS(imx2_wdt_pm_ops, imx2_wdt_suspend, + imx2_wdt_resume); + +static const struct of_device_id imx2_wdt_dt_ids[] = { + { .compatible = "fsl,imx21-wdt", }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, imx2_wdt_dt_ids); + +static struct platform_driver imx2_wdt_driver = { + .remove = __exit_p(imx2_wdt_remove), + .shutdown = imx2_wdt_shutdown, + .driver = { + .name = DRIVER_NAME, + .pm = &imx2_wdt_pm_ops, + .of_match_table = imx2_wdt_dt_ids, + }, +}; + +module_platform_driver_probe(imx2_wdt_driver, imx2_wdt_probe); + +MODULE_AUTHOR("Wolfram Sang"); +MODULE_DESCRIPTION("Watchdog driver for IMX2 and later"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:" DRIVER_NAME); diff --git a/drivers/watchdog/indydog.c b/drivers/watchdog/indydog.c new file mode 100644 index 000000000..5d20cdd30 --- /dev/null +++ b/drivers/watchdog/indydog.c @@ -0,0 +1,207 @@ +/* + * IndyDog 0.3 A Hardware Watchdog Device for SGI IP22 + * + * (c) Copyright 2002 Guido Guenther <agx@sigxcpu.org>, + * All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * based on softdog.c by Alan Cox <alan@lxorguk.ukuu.org.uk> + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/types.h> +#include <linux/kernel.h> +#include <linux/fs.h> +#include <linux/mm.h> +#include <linux/miscdevice.h> +#include <linux/watchdog.h> +#include <linux/notifier.h> +#include <linux/reboot.h> +#include <linux/init.h> +#include <linux/uaccess.h> +#include <asm/sgi/mc.h> + +static unsigned long indydog_alive; +static DEFINE_SPINLOCK(indydog_lock); + +#define WATCHDOG_TIMEOUT 30 /* 30 sec default timeout */ + +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); +MODULE_PARM_DESC(nowayout, + "Watchdog cannot be stopped once started (default=" + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); + +static void indydog_start(void) +{ + spin_lock(&indydog_lock); + sgimc->cpuctrl0 |= SGIMC_CCTRL0_WDOG; + spin_unlock(&indydog_lock); +} + +static void indydog_stop(void) +{ + spin_lock(&indydog_lock); + sgimc->cpuctrl0 &= ~SGIMC_CCTRL0_WDOG; + spin_unlock(&indydog_lock); + + pr_info("Stopped watchdog timer\n"); +} + +static void indydog_ping(void) +{ + sgimc->watchdogt = 0; +} + +/* + * Allow only one person to hold it open + */ +static int indydog_open(struct inode *inode, struct file *file) +{ + if (test_and_set_bit(0, &indydog_alive)) + return -EBUSY; + + if (nowayout) + __module_get(THIS_MODULE); + + /* Activate timer */ + indydog_start(); + indydog_ping(); + + pr_info("Started watchdog timer\n"); + + return nonseekable_open(inode, file); +} + +static int indydog_release(struct inode *inode, struct file *file) +{ + /* Shut off the timer. + * Lock it in if it's a module and we defined ...NOWAYOUT */ + if (!nowayout) + indydog_stop(); /* Turn the WDT off */ + clear_bit(0, &indydog_alive); + return 0; +} + +static ssize_t indydog_write(struct file *file, const char *data, + size_t len, loff_t *ppos) +{ + /* Refresh the timer. */ + if (len) + indydog_ping(); + return len; +} + +static long indydog_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) +{ + int options, retval = -EINVAL; + static const struct watchdog_info ident = { + .options = WDIOF_KEEPALIVEPING, + .firmware_version = 0, + .identity = "Hardware Watchdog for SGI IP22", + }; + + switch (cmd) { + case WDIOC_GETSUPPORT: + if (copy_to_user((struct watchdog_info *)arg, + &ident, sizeof(ident))) + return -EFAULT; + return 0; + case WDIOC_GETSTATUS: + case WDIOC_GETBOOTSTATUS: + return put_user(0, (int *)arg); + case WDIOC_SETOPTIONS: + { + if (get_user(options, (int *)arg)) + return -EFAULT; + if (options & WDIOS_DISABLECARD) { + indydog_stop(); + retval = 0; + } + if (options & WDIOS_ENABLECARD) { + indydog_start(); + retval = 0; + } + return retval; + } + case WDIOC_KEEPALIVE: + indydog_ping(); + return 0; + case WDIOC_GETTIMEOUT: + return put_user(WATCHDOG_TIMEOUT, (int *)arg); + default: + return -ENOTTY; + } +} + +static int indydog_notify_sys(struct notifier_block *this, + unsigned long code, void *unused) +{ + if (code == SYS_DOWN || code == SYS_HALT) + indydog_stop(); /* Turn the WDT off */ + + return NOTIFY_DONE; +} + +static const struct file_operations indydog_fops = { + .owner = THIS_MODULE, + .llseek = no_llseek, + .write = indydog_write, + .unlocked_ioctl = indydog_ioctl, + .open = indydog_open, + .release = indydog_release, +}; + +static struct miscdevice indydog_miscdev = { + .minor = WATCHDOG_MINOR, + .name = "watchdog", + .fops = &indydog_fops, +}; + +static struct notifier_block indydog_notifier = { + .notifier_call = indydog_notify_sys, +}; + +static int __init watchdog_init(void) +{ + int ret; + + ret = register_reboot_notifier(&indydog_notifier); + if (ret) { + pr_err("cannot register reboot notifier (err=%d)\n", ret); + return ret; + } + + ret = misc_register(&indydog_miscdev); + if (ret) { + pr_err("cannot register miscdev on minor=%d (err=%d)\n", + WATCHDOG_MINOR, ret); + unregister_reboot_notifier(&indydog_notifier); + return ret; + } + + pr_info("Hardware Watchdog Timer for SGI IP22: 0.3\n"); + + return 0; +} + +static void __exit watchdog_exit(void) +{ + misc_deregister(&indydog_miscdev); + unregister_reboot_notifier(&indydog_notifier); +} + +module_init(watchdog_init); +module_exit(watchdog_exit); + +MODULE_AUTHOR("Guido Guenther <agx@sigxcpu.org>"); +MODULE_DESCRIPTION("Hardware Watchdog Device for SGI IP22"); +MODULE_LICENSE("GPL"); diff --git a/drivers/watchdog/intel-mid_wdt.c b/drivers/watchdog/intel-mid_wdt.c new file mode 100644 index 000000000..72c108a12 --- /dev/null +++ b/drivers/watchdog/intel-mid_wdt.c @@ -0,0 +1,188 @@ +/* + * intel-mid_wdt: generic Intel MID SCU watchdog driver + * + * Platforms supported so far: + * - Merrifield only + * + * Copyright (C) 2014 Intel Corporation. All rights reserved. + * Contact: David Cohen <david.a.cohen@linux.intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of version 2 of the GNU General + * Public License as published by the Free Software Foundation. + */ + +#include <linux/interrupt.h> +#include <linux/module.h> +#include <linux/nmi.h> +#include <linux/platform_device.h> +#include <linux/watchdog.h> +#include <linux/platform_data/intel-mid_wdt.h> + +#include <asm/intel_scu_ipc.h> +#include <asm/intel-mid.h> + +#define IPC_WATCHDOG 0xf8 + +#define MID_WDT_PRETIMEOUT 15 +#define MID_WDT_TIMEOUT_MIN (1 + MID_WDT_PRETIMEOUT) +#define MID_WDT_TIMEOUT_MAX 170 +#define MID_WDT_DEFAULT_TIMEOUT 90 + +/* SCU watchdog messages */ +enum { + SCU_WATCHDOG_START = 0, + SCU_WATCHDOG_STOP, + SCU_WATCHDOG_KEEPALIVE, +}; + +static inline int wdt_command(int sub, u32 *in, int inlen) +{ + return intel_scu_ipc_command(IPC_WATCHDOG, sub, in, inlen, NULL, 0); +} + +static int wdt_start(struct watchdog_device *wd) +{ + struct device *dev = watchdog_get_drvdata(wd); + int ret, in_size; + int timeout = wd->timeout; + struct ipc_wd_start { + u32 pretimeout; + u32 timeout; + } ipc_wd_start = { timeout - MID_WDT_PRETIMEOUT, timeout }; + + /* + * SCU expects the input size for watchdog IPC to + * be based on 4 bytes + */ + in_size = DIV_ROUND_UP(sizeof(ipc_wd_start), 4); + + ret = wdt_command(SCU_WATCHDOG_START, (u32 *)&ipc_wd_start, in_size); + if (ret) + dev_crit(dev, "error starting watchdog: %d\n", ret); + + return ret; +} + +static int wdt_ping(struct watchdog_device *wd) +{ + struct device *dev = watchdog_get_drvdata(wd); + int ret; + + ret = wdt_command(SCU_WATCHDOG_KEEPALIVE, NULL, 0); + if (ret) + dev_crit(dev, "Error executing keepalive: %d\n", ret); + + return ret; +} + +static int wdt_stop(struct watchdog_device *wd) +{ + struct device *dev = watchdog_get_drvdata(wd); + int ret; + + ret = wdt_command(SCU_WATCHDOG_STOP, NULL, 0); + if (ret) + dev_crit(dev, "Error stopping watchdog: %d\n", ret); + + return ret; +} + +static irqreturn_t mid_wdt_irq(int irq, void *dev_id) +{ + panic("Kernel Watchdog"); + + /* This code should not be reached */ + return IRQ_HANDLED; +} + +static const struct watchdog_info mid_wdt_info = { + .identity = "Intel MID SCU watchdog", + .options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE, +}; + +static const struct watchdog_ops mid_wdt_ops = { + .owner = THIS_MODULE, + .start = wdt_start, + .stop = wdt_stop, + .ping = wdt_ping, +}; + +static int mid_wdt_probe(struct platform_device *pdev) +{ + struct watchdog_device *wdt_dev; + struct intel_mid_wdt_pdata *pdata = pdev->dev.platform_data; + int ret; + + if (!pdata) { + dev_err(&pdev->dev, "missing platform data\n"); + return -EINVAL; + } + + if (pdata->probe) { + ret = pdata->probe(pdev); + if (ret) + return ret; + } + + wdt_dev = devm_kzalloc(&pdev->dev, sizeof(*wdt_dev), GFP_KERNEL); + if (!wdt_dev) + return -ENOMEM; + + wdt_dev->info = &mid_wdt_info; + wdt_dev->ops = &mid_wdt_ops; + wdt_dev->min_timeout = MID_WDT_TIMEOUT_MIN; + wdt_dev->max_timeout = MID_WDT_TIMEOUT_MAX; + wdt_dev->timeout = MID_WDT_DEFAULT_TIMEOUT; + wdt_dev->parent = &pdev->dev; + + watchdog_set_drvdata(wdt_dev, &pdev->dev); + + ret = devm_request_irq(&pdev->dev, pdata->irq, mid_wdt_irq, + IRQF_SHARED | IRQF_NO_SUSPEND, "watchdog", + wdt_dev); + if (ret) { + dev_err(&pdev->dev, "error requesting warning irq %d\n", + pdata->irq); + return ret; + } + + /* + * The firmware followed by U-Boot leaves the watchdog running + * with the default threshold which may vary. When we get here + * we should make a decision to prevent any side effects before + * user space daemon will take care of it. The best option, + * taking into consideration that there is no way to read values + * back from hardware, is to enforce watchdog being run with + * deterministic values. + */ + ret = wdt_start(wdt_dev); + if (ret) + return ret; + + /* Make sure the watchdog is serviced */ + set_bit(WDOG_HW_RUNNING, &wdt_dev->status); + + ret = devm_watchdog_register_device(&pdev->dev, wdt_dev); + if (ret) { + dev_err(&pdev->dev, "error registering watchdog device\n"); + return ret; + } + + dev_info(&pdev->dev, "Intel MID watchdog device probed\n"); + + return 0; +} + +static struct platform_driver mid_wdt_driver = { + .probe = mid_wdt_probe, + .driver = { + .name = "intel_mid_wdt", + }, +}; + +module_platform_driver(mid_wdt_driver); + +MODULE_AUTHOR("David Cohen <david.a.cohen@linux.intel.com>"); +MODULE_DESCRIPTION("Watchdog Driver for Intel MID platform"); +MODULE_LICENSE("GPL"); diff --git a/drivers/watchdog/intel_scu_watchdog.c b/drivers/watchdog/intel_scu_watchdog.c new file mode 100644 index 000000000..0caab6241 --- /dev/null +++ b/drivers/watchdog/intel_scu_watchdog.c @@ -0,0 +1,565 @@ +/* + * Intel_SCU 0.2: An Intel SCU IOH Based Watchdog Device + * for Intel part #(s): + * - AF82MP20 PCH + * + * Copyright (C) 2009-2010 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of version 2 of the GNU General + * Public License as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be + * useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR + * PURPOSE. See the GNU General Public License for more details. + * You should have received a copy of the GNU General Public + * License along with this program; if not, write to the Free + * Software Foundation, Inc., 59 Temple Place - Suite 330, + * Boston, MA 02111-1307, USA. + * The full GNU General Public License is included in this + * distribution in the file called COPYING. + * + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/compiler.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/moduleparam.h> +#include <linux/types.h> +#include <linux/miscdevice.h> +#include <linux/watchdog.h> +#include <linux/fs.h> +#include <linux/notifier.h> +#include <linux/reboot.h> +#include <linux/init.h> +#include <linux/jiffies.h> +#include <linux/uaccess.h> +#include <linux/slab.h> +#include <linux/io.h> +#include <linux/interrupt.h> +#include <linux/delay.h> +#include <linux/sched.h> +#include <linux/signal.h> +#include <linux/sfi.h> +#include <asm/irq.h> +#include <linux/atomic.h> +#include <asm/intel_scu_ipc.h> +#include <asm/apb_timer.h> +#include <asm/intel-mid.h> + +#include "intel_scu_watchdog.h" + +/* Bounds number of times we will retry loading time count */ +/* This retry is a work around for a silicon bug. */ +#define MAX_RETRY 16 + +#define IPC_SET_WATCHDOG_TIMER 0xF8 + +static int timer_margin = DEFAULT_SOFT_TO_HARD_MARGIN; +module_param(timer_margin, int, 0); +MODULE_PARM_DESC(timer_margin, + "Watchdog timer margin" + "Time between interrupt and resetting the system" + "The range is from 1 to 160" + "This is the time for all keep alives to arrive"); + +static int timer_set = DEFAULT_TIME; +module_param(timer_set, int, 0); +MODULE_PARM_DESC(timer_set, + "Default Watchdog timer setting" + "Complete cycle time" + "The range is from 1 to 170" + "This is the time for all keep alives to arrive"); + +/* After watchdog device is closed, check force_boot. If: + * force_boot == 0, then force boot on next watchdog interrupt after close, + * force_boot == 1, then force boot immediately when device is closed. + */ +static int force_boot; +module_param(force_boot, int, 0); +MODULE_PARM_DESC(force_boot, + "A value of 1 means that the driver will reboot" + "the system immediately if the /dev/watchdog device is closed" + "A value of 0 means that when /dev/watchdog device is closed" + "the watchdog timer will be refreshed for one more interval" + "of length: timer_set. At the end of this interval, the" + "watchdog timer will reset the system." + ); + +/* there is only one device in the system now; this can be made into + * an array in the future if we have more than one device */ + +static struct intel_scu_watchdog_dev watchdog_device; + +/* Forces restart, if force_reboot is set */ +static void watchdog_fire(void) +{ + if (force_boot) { + pr_crit("Initiating system reboot\n"); + emergency_restart(); + pr_crit("Reboot didn't ?????\n"); + } + + else { + pr_crit("Immediate Reboot Disabled\n"); + pr_crit("System will reset when watchdog timer times out!\n"); + } +} + +static int check_timer_margin(int new_margin) +{ + if ((new_margin < MIN_TIME_CYCLE) || + (new_margin > MAX_TIME - timer_set)) { + pr_debug("value of new_margin %d is out of the range %d to %d\n", + new_margin, MIN_TIME_CYCLE, MAX_TIME - timer_set); + return -EINVAL; + } + return 0; +} + +/* + * IPC operations + */ +static int watchdog_set_ipc(int soft_threshold, int threshold) +{ + u32 *ipc_wbuf; + u8 cbuf[16] = { '\0' }; + int ipc_ret = 0; + + ipc_wbuf = (u32 *)&cbuf; + ipc_wbuf[0] = soft_threshold; + ipc_wbuf[1] = threshold; + + ipc_ret = intel_scu_ipc_command( + IPC_SET_WATCHDOG_TIMER, + 0, + ipc_wbuf, + 2, + NULL, + 0); + + if (ipc_ret != 0) + pr_err("Error setting SCU watchdog timer: %x\n", ipc_ret); + + return ipc_ret; +}; + +/* + * Intel_SCU operations + */ + +/* timer interrupt handler */ +static irqreturn_t watchdog_timer_interrupt(int irq, void *dev_id) +{ + int int_status; + int_status = ioread32(watchdog_device.timer_interrupt_status_addr); + + pr_debug("irq, int_status: %x\n", int_status); + + if (int_status != 0) + return IRQ_NONE; + + /* has the timer been started? If not, then this is spurious */ + if (watchdog_device.timer_started == 0) { + pr_debug("spurious interrupt received\n"); + return IRQ_HANDLED; + } + + /* temporarily disable the timer */ + iowrite32(0x00000002, watchdog_device.timer_control_addr); + + /* set the timer to the threshold */ + iowrite32(watchdog_device.threshold, + watchdog_device.timer_load_count_addr); + + /* allow the timer to run */ + iowrite32(0x00000003, watchdog_device.timer_control_addr); + + return IRQ_HANDLED; +} + +static int intel_scu_keepalive(void) +{ + + /* read eoi register - clears interrupt */ + ioread32(watchdog_device.timer_clear_interrupt_addr); + + /* temporarily disable the timer */ + iowrite32(0x00000002, watchdog_device.timer_control_addr); + + /* set the timer to the soft_threshold */ + iowrite32(watchdog_device.soft_threshold, + watchdog_device.timer_load_count_addr); + + /* allow the timer to run */ + iowrite32(0x00000003, watchdog_device.timer_control_addr); + + return 0; +} + +static int intel_scu_stop(void) +{ + iowrite32(0, watchdog_device.timer_control_addr); + return 0; +} + +static int intel_scu_set_heartbeat(u32 t) +{ + int ipc_ret; + int retry_count; + u32 soft_value; + u32 hw_value; + + watchdog_device.timer_set = t; + watchdog_device.threshold = + timer_margin * watchdog_device.timer_tbl_ptr->freq_hz; + watchdog_device.soft_threshold = + (watchdog_device.timer_set - timer_margin) + * watchdog_device.timer_tbl_ptr->freq_hz; + + pr_debug("set_heartbeat: timer freq is %d\n", + watchdog_device.timer_tbl_ptr->freq_hz); + pr_debug("set_heartbeat: timer_set is %x (hex)\n", + watchdog_device.timer_set); + pr_debug("set_hearbeat: timer_margin is %x (hex)\n", timer_margin); + pr_debug("set_heartbeat: threshold is %x (hex)\n", + watchdog_device.threshold); + pr_debug("set_heartbeat: soft_threshold is %x (hex)\n", + watchdog_device.soft_threshold); + + /* Adjust thresholds by FREQ_ADJUSTMENT factor, to make the */ + /* watchdog timing come out right. */ + watchdog_device.threshold = + watchdog_device.threshold / FREQ_ADJUSTMENT; + watchdog_device.soft_threshold = + watchdog_device.soft_threshold / FREQ_ADJUSTMENT; + + /* temporarily disable the timer */ + iowrite32(0x00000002, watchdog_device.timer_control_addr); + + /* send the threshold and soft_threshold via IPC to the processor */ + ipc_ret = watchdog_set_ipc(watchdog_device.soft_threshold, + watchdog_device.threshold); + + if (ipc_ret != 0) { + /* Make sure the watchdog timer is stopped */ + intel_scu_stop(); + return ipc_ret; + } + + /* Soft Threshold set loop. Early versions of silicon did */ + /* not always set this count correctly. This loop checks */ + /* the value and retries if it was not set correctly. */ + + retry_count = 0; + soft_value = watchdog_device.soft_threshold & 0xFFFF0000; + do { + + /* Make sure timer is stopped */ + intel_scu_stop(); + + if (MAX_RETRY < retry_count++) { + /* Unable to set timer value */ + pr_err("Unable to set timer\n"); + return -ENODEV; + } + + /* set the timer to the soft threshold */ + iowrite32(watchdog_device.soft_threshold, + watchdog_device.timer_load_count_addr); + + /* read count value before starting timer */ + ioread32(watchdog_device.timer_load_count_addr); + + /* Start the timer */ + iowrite32(0x00000003, watchdog_device.timer_control_addr); + + /* read the value the time loaded into its count reg */ + hw_value = ioread32(watchdog_device.timer_load_count_addr); + hw_value = hw_value & 0xFFFF0000; + + + } while (soft_value != hw_value); + + watchdog_device.timer_started = 1; + + return 0; +} + +/* + * /dev/watchdog handling + */ + +static int intel_scu_open(struct inode *inode, struct file *file) +{ + + /* Set flag to indicate that watchdog device is open */ + if (test_and_set_bit(0, &watchdog_device.driver_open)) + return -EBUSY; + + /* Check for reopen of driver. Reopens are not allowed */ + if (watchdog_device.driver_closed) + return -EPERM; + + return nonseekable_open(inode, file); +} + +static int intel_scu_release(struct inode *inode, struct file *file) +{ + /* + * This watchdog should not be closed, after the timer + * is started with the WDIPC_SETTIMEOUT ioctl + * If force_boot is set watchdog_fire() will cause an + * immediate reset. If force_boot is not set, the watchdog + * timer is refreshed for one more interval. At the end + * of that interval, the watchdog timer will reset the system. + */ + + if (!test_and_clear_bit(0, &watchdog_device.driver_open)) { + pr_debug("intel_scu_release, without open\n"); + return -ENOTTY; + } + + if (!watchdog_device.timer_started) { + /* Just close, since timer has not been started */ + pr_debug("closed, without starting timer\n"); + return 0; + } + + pr_crit("Unexpected close of /dev/watchdog!\n"); + + /* Since the timer was started, prevent future reopens */ + watchdog_device.driver_closed = 1; + + /* Refresh the timer for one more interval */ + intel_scu_keepalive(); + + /* Reboot system (if force_boot is set) */ + watchdog_fire(); + + /* We should only reach this point if force_boot is not set */ + return 0; +} + +static ssize_t intel_scu_write(struct file *file, + char const *data, + size_t len, + loff_t *ppos) +{ + + if (watchdog_device.timer_started) + /* Watchdog already started, keep it alive */ + intel_scu_keepalive(); + else + /* Start watchdog with timer value set by init */ + intel_scu_set_heartbeat(watchdog_device.timer_set); + + return len; +} + +static long intel_scu_ioctl(struct file *file, + unsigned int cmd, + unsigned long arg) +{ + void __user *argp = (void __user *)arg; + u32 __user *p = argp; + u32 new_margin; + + + static const struct watchdog_info ident = { + .options = WDIOF_SETTIMEOUT + | WDIOF_KEEPALIVEPING, + .firmware_version = 0, /* @todo Get from SCU via + ipc_get_scu_fw_version()? */ + .identity = "Intel_SCU IOH Watchdog" /* len < 32 */ + }; + + switch (cmd) { + case WDIOC_GETSUPPORT: + return copy_to_user(argp, + &ident, + sizeof(ident)) ? -EFAULT : 0; + case WDIOC_GETSTATUS: + case WDIOC_GETBOOTSTATUS: + return put_user(0, p); + case WDIOC_KEEPALIVE: + intel_scu_keepalive(); + + return 0; + case WDIOC_SETTIMEOUT: + if (get_user(new_margin, p)) + return -EFAULT; + + if (check_timer_margin(new_margin)) + return -EINVAL; + + if (intel_scu_set_heartbeat(new_margin)) + return -EINVAL; + return 0; + case WDIOC_GETTIMEOUT: + return put_user(watchdog_device.soft_threshold, p); + + default: + return -ENOTTY; + } +} + +/* + * Notifier for system down + */ +static int intel_scu_notify_sys(struct notifier_block *this, + unsigned long code, + void *another_unused) +{ + if (code == SYS_DOWN || code == SYS_HALT) + /* Turn off the watchdog timer. */ + intel_scu_stop(); + return NOTIFY_DONE; +} + +/* + * Kernel Interfaces + */ +static const struct file_operations intel_scu_fops = { + .owner = THIS_MODULE, + .llseek = no_llseek, + .write = intel_scu_write, + .unlocked_ioctl = intel_scu_ioctl, + .open = intel_scu_open, + .release = intel_scu_release, +}; + +static int __init intel_scu_watchdog_init(void) +{ + int ret; + u32 __iomem *tmp_addr; + + /* + * We don't really need to check this as the SFI timer get will fail + * but if we do so we can exit with a clearer reason and no noise. + * + * If it isn't an intel MID device then it doesn't have this watchdog + */ + if (!intel_mid_identify_cpu()) + return -ENODEV; + + /* Check boot parameters to verify that their initial values */ + /* are in range. */ + /* Check value of timer_set boot parameter */ + if ((timer_set < MIN_TIME_CYCLE) || + (timer_set > MAX_TIME - MIN_TIME_CYCLE)) { + pr_err("value of timer_set %x (hex) is out of range from %x to %x (hex)\n", + timer_set, MIN_TIME_CYCLE, MAX_TIME - MIN_TIME_CYCLE); + return -EINVAL; + } + + /* Check value of timer_margin boot parameter */ + if (check_timer_margin(timer_margin)) + return -EINVAL; + + watchdog_device.timer_tbl_ptr = sfi_get_mtmr(sfi_mtimer_num-1); + + if (watchdog_device.timer_tbl_ptr == NULL) { + pr_debug("timer is not available\n"); + return -ENODEV; + } + /* make sure the timer exists */ + if (watchdog_device.timer_tbl_ptr->phys_addr == 0) { + pr_debug("timer %d does not have valid physical memory\n", + sfi_mtimer_num); + return -ENODEV; + } + + if (watchdog_device.timer_tbl_ptr->irq == 0) { + pr_debug("timer %d invalid irq\n", sfi_mtimer_num); + return -ENODEV; + } + + tmp_addr = ioremap_nocache(watchdog_device.timer_tbl_ptr->phys_addr, + 20); + + if (tmp_addr == NULL) { + pr_debug("timer unable to ioremap\n"); + return -ENOMEM; + } + + watchdog_device.timer_load_count_addr = tmp_addr++; + watchdog_device.timer_current_value_addr = tmp_addr++; + watchdog_device.timer_control_addr = tmp_addr++; + watchdog_device.timer_clear_interrupt_addr = tmp_addr++; + watchdog_device.timer_interrupt_status_addr = tmp_addr++; + + /* Set the default time values in device structure */ + + watchdog_device.timer_set = timer_set; + watchdog_device.threshold = + timer_margin * watchdog_device.timer_tbl_ptr->freq_hz; + watchdog_device.soft_threshold = + (watchdog_device.timer_set - timer_margin) + * watchdog_device.timer_tbl_ptr->freq_hz; + + + watchdog_device.intel_scu_notifier.notifier_call = + intel_scu_notify_sys; + + ret = register_reboot_notifier(&watchdog_device.intel_scu_notifier); + if (ret) { + pr_err("cannot register notifier %d)\n", ret); + goto register_reboot_error; + } + + watchdog_device.miscdev.minor = WATCHDOG_MINOR; + watchdog_device.miscdev.name = "watchdog"; + watchdog_device.miscdev.fops = &intel_scu_fops; + + ret = misc_register(&watchdog_device.miscdev); + if (ret) { + pr_err("cannot register miscdev %d err =%d\n", + WATCHDOG_MINOR, ret); + goto misc_register_error; + } + + ret = request_irq((unsigned int)watchdog_device.timer_tbl_ptr->irq, + watchdog_timer_interrupt, + IRQF_SHARED, "watchdog", + &watchdog_device.timer_load_count_addr); + if (ret) { + pr_err("error requesting irq %d\n", ret); + goto request_irq_error; + } + /* Make sure timer is disabled before returning */ + intel_scu_stop(); + return 0; + +/* error cleanup */ + +request_irq_error: + misc_deregister(&watchdog_device.miscdev); +misc_register_error: + unregister_reboot_notifier(&watchdog_device.intel_scu_notifier); +register_reboot_error: + intel_scu_stop(); + iounmap(watchdog_device.timer_load_count_addr); + return ret; +} + +static void __exit intel_scu_watchdog_exit(void) +{ + + misc_deregister(&watchdog_device.miscdev); + unregister_reboot_notifier(&watchdog_device.intel_scu_notifier); + /* disable the timer */ + iowrite32(0x00000002, watchdog_device.timer_control_addr); + iounmap(watchdog_device.timer_load_count_addr); +} + +late_initcall(intel_scu_watchdog_init); +module_exit(intel_scu_watchdog_exit); + +MODULE_AUTHOR("Intel Corporation"); +MODULE_DESCRIPTION("Intel SCU Watchdog Device Driver"); +MODULE_LICENSE("GPL"); +MODULE_VERSION(WDT_VER); diff --git a/drivers/watchdog/intel_scu_watchdog.h b/drivers/watchdog/intel_scu_watchdog.h new file mode 100644 index 000000000..f3ac608de --- /dev/null +++ b/drivers/watchdog/intel_scu_watchdog.h @@ -0,0 +1,65 @@ +/* + * Intel_SCU 0.2: An Intel SCU IOH Based Watchdog Device + * for Intel part #(s): + * - AF82MP20 PCH + * + * Copyright (C) 2009-2010 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of version 2 of the GNU General + * Public License as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be + * useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR + * PURPOSE. See the GNU General Public License for more details. + * You should have received a copy of the GNU General Public + * License along with this program; if not, write to the Free + * Software Foundation, Inc., 59 Temple Place - Suite 330, + * Boston, MA 02111-1307, USA. + * The full GNU General Public License is included in this + * distribution in the file called COPYING. + * + */ + +#ifndef __INTEL_SCU_WATCHDOG_H +#define __INTEL_SCU_WATCHDOG_H + +#define WDT_VER "0.3" + +/* minimum time between interrupts */ +#define MIN_TIME_CYCLE 1 + +/* Time from warning to reboot is 2 seconds */ +#define DEFAULT_SOFT_TO_HARD_MARGIN 2 + +#define MAX_TIME 170 + +#define DEFAULT_TIME 5 + +#define MAX_SOFT_TO_HARD_MARGIN (MAX_TIME-MIN_TIME_CYCLE) + +/* Ajustment to clock tick frequency to make timing come out right */ +#define FREQ_ADJUSTMENT 8 + +struct intel_scu_watchdog_dev { + ulong driver_open; + ulong driver_closed; + u32 timer_started; + u32 timer_set; + u32 threshold; + u32 soft_threshold; + u32 __iomem *timer_load_count_addr; + u32 __iomem *timer_current_value_addr; + u32 __iomem *timer_control_addr; + u32 __iomem *timer_clear_interrupt_addr; + u32 __iomem *timer_interrupt_status_addr; + struct sfi_timer_table_entry *timer_tbl_ptr; + struct notifier_block intel_scu_notifier; + struct miscdevice miscdev; +}; + +extern int sfi_mtimer_num; + +/* extern struct sfi_timer_table_entry *sfi_get_mtmr(int hint); */ +#endif /* __INTEL_SCU_WATCHDOG_H */ diff --git a/drivers/watchdog/iop_wdt.c b/drivers/watchdog/iop_wdt.c new file mode 100644 index 000000000..b16013ffa --- /dev/null +++ b/drivers/watchdog/iop_wdt.c @@ -0,0 +1,261 @@ +/* + * drivers/char/watchdog/iop_wdt.c + * + * WDT driver for Intel I/O Processors + * Copyright (C) 2005, Intel Corporation. + * + * Based on ixp4xx driver, Copyright 2004 (c) MontaVista, Software, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., 59 Temple + * Place - Suite 330, Boston, MA 02111-1307 USA. + * + * Curt E Bruns <curt.e.bruns@intel.com> + * Peter Milne <peter.milne@d-tacq.com> + * Dan Williams <dan.j.williams@intel.com> + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/fs.h> +#include <linux/init.h> +#include <linux/device.h> +#include <linux/miscdevice.h> +#include <linux/watchdog.h> +#include <linux/uaccess.h> +#include <mach/hardware.h> + +static bool nowayout = WATCHDOG_NOWAYOUT; +static unsigned long wdt_status; +static unsigned long boot_status; +static DEFINE_SPINLOCK(wdt_lock); + +#define WDT_IN_USE 0 +#define WDT_OK_TO_CLOSE 1 +#define WDT_ENABLED 2 + +static unsigned long iop_watchdog_timeout(void) +{ + return (0xffffffffUL / get_iop_tick_rate()); +} + +/** + * wdt_supports_disable - determine if we are accessing a iop13xx watchdog + * or iop3xx by whether it has a disable command + */ +static int wdt_supports_disable(void) +{ + int can_disable; + + if (IOP_WDTCR_EN_ARM != IOP_WDTCR_DIS_ARM) + can_disable = 1; + else + can_disable = 0; + + return can_disable; +} + +static void wdt_enable(void) +{ + /* Arm and enable the Timer to starting counting down from 0xFFFF.FFFF + * Takes approx. 10.7s to timeout + */ + spin_lock(&wdt_lock); + write_wdtcr(IOP_WDTCR_EN_ARM); + write_wdtcr(IOP_WDTCR_EN); + spin_unlock(&wdt_lock); +} + +/* returns 0 if the timer was successfully disabled */ +static int wdt_disable(void) +{ + /* Stop Counting */ + if (wdt_supports_disable()) { + spin_lock(&wdt_lock); + write_wdtcr(IOP_WDTCR_DIS_ARM); + write_wdtcr(IOP_WDTCR_DIS); + clear_bit(WDT_ENABLED, &wdt_status); + spin_unlock(&wdt_lock); + pr_info("Disabled\n"); + return 0; + } else + return 1; +} + +static int iop_wdt_open(struct inode *inode, struct file *file) +{ + if (test_and_set_bit(WDT_IN_USE, &wdt_status)) + return -EBUSY; + + clear_bit(WDT_OK_TO_CLOSE, &wdt_status); + wdt_enable(); + set_bit(WDT_ENABLED, &wdt_status); + return nonseekable_open(inode, file); +} + +static ssize_t iop_wdt_write(struct file *file, const char *data, size_t len, + loff_t *ppos) +{ + if (len) { + if (!nowayout) { + size_t i; + + clear_bit(WDT_OK_TO_CLOSE, &wdt_status); + + for (i = 0; i != len; i++) { + char c; + + if (get_user(c, data + i)) + return -EFAULT; + if (c == 'V') + set_bit(WDT_OK_TO_CLOSE, &wdt_status); + } + } + wdt_enable(); + } + return len; +} + +static const struct watchdog_info ident = { + .options = WDIOF_CARDRESET | WDIOF_MAGICCLOSE | WDIOF_KEEPALIVEPING, + .identity = "iop watchdog", +}; + +static long iop_wdt_ioctl(struct file *file, + unsigned int cmd, unsigned long arg) +{ + int options; + int ret = -ENOTTY; + int __user *argp = (int __user *)arg; + + switch (cmd) { + case WDIOC_GETSUPPORT: + if (copy_to_user(argp, &ident, sizeof(ident))) + ret = -EFAULT; + else + ret = 0; + break; + + case WDIOC_GETSTATUS: + ret = put_user(0, argp); + break; + + case WDIOC_GETBOOTSTATUS: + ret = put_user(boot_status, argp); + break; + + case WDIOC_SETOPTIONS: + if (get_user(options, (int *)arg)) + return -EFAULT; + + if (options & WDIOS_DISABLECARD) { + if (!nowayout) { + if (wdt_disable() == 0) { + set_bit(WDT_OK_TO_CLOSE, &wdt_status); + ret = 0; + } else + ret = -ENXIO; + } else + ret = 0; + } + if (options & WDIOS_ENABLECARD) { + wdt_enable(); + ret = 0; + } + break; + + case WDIOC_KEEPALIVE: + wdt_enable(); + ret = 0; + break; + + case WDIOC_GETTIMEOUT: + ret = put_user(iop_watchdog_timeout(), argp); + break; + } + return ret; +} + +static int iop_wdt_release(struct inode *inode, struct file *file) +{ + int state = 1; + if (test_bit(WDT_OK_TO_CLOSE, &wdt_status)) + if (test_bit(WDT_ENABLED, &wdt_status)) + state = wdt_disable(); + + /* if the timer is not disabled reload and notify that we are still + * going down + */ + if (state != 0) { + wdt_enable(); + pr_crit("Device closed unexpectedly - reset in %lu seconds\n", + iop_watchdog_timeout()); + } + + clear_bit(WDT_IN_USE, &wdt_status); + clear_bit(WDT_OK_TO_CLOSE, &wdt_status); + + return 0; +} + +static const struct file_operations iop_wdt_fops = { + .owner = THIS_MODULE, + .llseek = no_llseek, + .write = iop_wdt_write, + .unlocked_ioctl = iop_wdt_ioctl, + .open = iop_wdt_open, + .release = iop_wdt_release, +}; + +static struct miscdevice iop_wdt_miscdev = { + .minor = WATCHDOG_MINOR, + .name = "watchdog", + .fops = &iop_wdt_fops, +}; + +static int __init iop_wdt_init(void) +{ + int ret; + + /* check if the reset was caused by the watchdog timer */ + boot_status = (read_rcsr() & IOP_RCSR_WDT) ? WDIOF_CARDRESET : 0; + + /* Configure Watchdog Timeout to cause an Internal Bus (IB) Reset + * NOTE: An IB Reset will Reset both cores in the IOP342 + */ + write_wdtsr(IOP13XX_WDTCR_IB_RESET); + + /* Register after we have the device set up so we cannot race + with an open */ + ret = misc_register(&iop_wdt_miscdev); + if (ret == 0) + pr_info("timeout %lu sec\n", iop_watchdog_timeout()); + + return ret; +} + +static void __exit iop_wdt_exit(void) +{ + misc_deregister(&iop_wdt_miscdev); +} + +module_init(iop_wdt_init); +module_exit(iop_wdt_exit); + +module_param(nowayout, bool, 0); +MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started"); + +MODULE_AUTHOR("Curt E Bruns <curt.e.bruns@intel.com>"); +MODULE_DESCRIPTION("iop watchdog timer driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/watchdog/it8712f_wdt.c b/drivers/watchdog/it8712f_wdt.c new file mode 100644 index 000000000..41b3979a9 --- /dev/null +++ b/drivers/watchdog/it8712f_wdt.c @@ -0,0 +1,454 @@ +/* + * IT8712F "Smart Guardian" Watchdog support + * + * Copyright (c) 2006-2007 Jorge Boncompte - DTI2 <jorge@dti2.net> + * + * Based on info and code taken from: + * + * drivers/char/watchdog/scx200_wdt.c + * drivers/hwmon/it87.c + * IT8712F EC-LPC I/O Preliminary Specification 0.8.2 + * IT8712F EC-LPC I/O Preliminary Specification 0.9.3 + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * The author(s) of this software shall not be held liable for damages + * of any nature resulting due to the use of this software. This + * software is provided AS-IS with no warranties. + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/init.h> +#include <linux/miscdevice.h> +#include <linux/watchdog.h> +#include <linux/notifier.h> +#include <linux/reboot.h> +#include <linux/fs.h> +#include <linux/spinlock.h> +#include <linux/uaccess.h> +#include <linux/io.h> +#include <linux/ioport.h> + +#define DEBUG +#define NAME "it8712f_wdt" + +MODULE_AUTHOR("Jorge Boncompte - DTI2 <jorge@dti2.net>"); +MODULE_DESCRIPTION("IT8712F Watchdog Driver"); +MODULE_LICENSE("GPL"); + +static int max_units = 255; +static int margin = 60; /* in seconds */ +module_param(margin, int, 0); +MODULE_PARM_DESC(margin, "Watchdog margin in seconds"); + +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); +MODULE_PARM_DESC(nowayout, "Disable watchdog shutdown on close"); + +static unsigned long wdt_open; +static unsigned expect_close; +static unsigned char revision; + +/* Dog Food address - We use the game port address */ +static unsigned short address; + +#define REG 0x2e /* The register to read/write */ +#define VAL 0x2f /* The value to read/write */ + +#define LDN 0x07 /* Register: Logical device select */ +#define DEVID 0x20 /* Register: Device ID */ +#define DEVREV 0x22 /* Register: Device Revision */ +#define ACT_REG 0x30 /* LDN Register: Activation */ +#define BASE_REG 0x60 /* LDN Register: Base address */ + +#define IT8712F_DEVID 0x8712 + +#define LDN_GPIO 0x07 /* GPIO and Watch Dog Timer */ +#define LDN_GAME 0x09 /* Game Port */ + +#define WDT_CONTROL 0x71 /* WDT Register: Control */ +#define WDT_CONFIG 0x72 /* WDT Register: Configuration */ +#define WDT_TIMEOUT 0x73 /* WDT Register: Timeout Value */ + +#define WDT_RESET_GAME 0x10 /* Reset timer on read or write to game port */ +#define WDT_RESET_KBD 0x20 /* Reset timer on keyboard interrupt */ +#define WDT_RESET_MOUSE 0x40 /* Reset timer on mouse interrupt */ +#define WDT_RESET_CIR 0x80 /* Reset timer on consumer IR interrupt */ + +#define WDT_UNIT_SEC 0x80 /* If 0 in MINUTES */ + +#define WDT_OUT_PWROK 0x10 /* Pulse PWROK on timeout */ +#define WDT_OUT_KRST 0x40 /* Pulse reset on timeout */ + +static int wdt_control_reg = WDT_RESET_GAME; +module_param(wdt_control_reg, int, 0); +MODULE_PARM_DESC(wdt_control_reg, "Value to write to watchdog control " + "register. The default WDT_RESET_GAME resets the timer on " + "game port reads that this driver generates. You can also " + "use KBD, MOUSE or CIR if you have some external way to " + "generate those interrupts."); + +static int superio_inb(int reg) +{ + outb(reg, REG); + return inb(VAL); +} + +static void superio_outb(int val, int reg) +{ + outb(reg, REG); + outb(val, VAL); +} + +static int superio_inw(int reg) +{ + int val; + outb(reg++, REG); + val = inb(VAL) << 8; + outb(reg, REG); + val |= inb(VAL); + return val; +} + +static inline void superio_select(int ldn) +{ + outb(LDN, REG); + outb(ldn, VAL); +} + +static inline int superio_enter(void) +{ + /* + * Try to reserve REG and REG + 1 for exclusive access. + */ + if (!request_muxed_region(REG, 2, NAME)) + return -EBUSY; + + outb(0x87, REG); + outb(0x01, REG); + outb(0x55, REG); + outb(0x55, REG); + return 0; +} + +static inline void superio_exit(void) +{ + outb(0x02, REG); + outb(0x02, VAL); + release_region(REG, 2); +} + +static inline void it8712f_wdt_ping(void) +{ + if (wdt_control_reg & WDT_RESET_GAME) + inb(address); +} + +static void it8712f_wdt_update_margin(void) +{ + int config = WDT_OUT_KRST | WDT_OUT_PWROK; + int units = margin; + + /* Switch to minutes precision if the configured margin + * value does not fit within the register width. + */ + if (units <= max_units) { + config |= WDT_UNIT_SEC; /* else UNIT is MINUTES */ + pr_info("timer margin %d seconds\n", units); + } else { + units /= 60; + pr_info("timer margin %d minutes\n", units); + } + superio_outb(config, WDT_CONFIG); + + if (revision >= 0x08) + superio_outb(units >> 8, WDT_TIMEOUT + 1); + superio_outb(units, WDT_TIMEOUT); +} + +static int it8712f_wdt_get_status(void) +{ + if (superio_inb(WDT_CONTROL) & 0x01) + return WDIOF_CARDRESET; + else + return 0; +} + +static int it8712f_wdt_enable(void) +{ + int ret = superio_enter(); + if (ret) + return ret; + + pr_debug("enabling watchdog timer\n"); + superio_select(LDN_GPIO); + + superio_outb(wdt_control_reg, WDT_CONTROL); + + it8712f_wdt_update_margin(); + + superio_exit(); + + it8712f_wdt_ping(); + + return 0; +} + +static int it8712f_wdt_disable(void) +{ + int ret = superio_enter(); + if (ret) + return ret; + + pr_debug("disabling watchdog timer\n"); + superio_select(LDN_GPIO); + + superio_outb(0, WDT_CONFIG); + superio_outb(0, WDT_CONTROL); + if (revision >= 0x08) + superio_outb(0, WDT_TIMEOUT + 1); + superio_outb(0, WDT_TIMEOUT); + + superio_exit(); + return 0; +} + +static int it8712f_wdt_notify(struct notifier_block *this, + unsigned long code, void *unused) +{ + if (code == SYS_HALT || code == SYS_POWER_OFF) + if (!nowayout) + it8712f_wdt_disable(); + + return NOTIFY_DONE; +} + +static struct notifier_block it8712f_wdt_notifier = { + .notifier_call = it8712f_wdt_notify, +}; + +static ssize_t it8712f_wdt_write(struct file *file, const char __user *data, + size_t len, loff_t *ppos) +{ + /* check for a magic close character */ + if (len) { + size_t i; + + it8712f_wdt_ping(); + + expect_close = 0; + for (i = 0; i < len; ++i) { + char c; + if (get_user(c, data + i)) + return -EFAULT; + if (c == 'V') + expect_close = 42; + } + } + + return len; +} + +static long it8712f_wdt_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) +{ + void __user *argp = (void __user *)arg; + int __user *p = argp; + static const struct watchdog_info ident = { + .identity = "IT8712F Watchdog", + .firmware_version = 1, + .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | + WDIOF_MAGICCLOSE, + }; + int value; + int ret; + + switch (cmd) { + case WDIOC_GETSUPPORT: + if (copy_to_user(argp, &ident, sizeof(ident))) + return -EFAULT; + return 0; + case WDIOC_GETSTATUS: + ret = superio_enter(); + if (ret) + return ret; + superio_select(LDN_GPIO); + + value = it8712f_wdt_get_status(); + + superio_exit(); + + return put_user(value, p); + case WDIOC_GETBOOTSTATUS: + return put_user(0, p); + case WDIOC_KEEPALIVE: + it8712f_wdt_ping(); + return 0; + case WDIOC_SETTIMEOUT: + if (get_user(value, p)) + return -EFAULT; + if (value < 1) + return -EINVAL; + if (value > (max_units * 60)) + return -EINVAL; + margin = value; + ret = superio_enter(); + if (ret) + return ret; + superio_select(LDN_GPIO); + + it8712f_wdt_update_margin(); + + superio_exit(); + it8712f_wdt_ping(); + /* Fall through */ + case WDIOC_GETTIMEOUT: + if (put_user(margin, p)) + return -EFAULT; + return 0; + default: + return -ENOTTY; + } +} + +static int it8712f_wdt_open(struct inode *inode, struct file *file) +{ + int ret; + /* only allow one at a time */ + if (test_and_set_bit(0, &wdt_open)) + return -EBUSY; + + ret = it8712f_wdt_enable(); + if (ret) + return ret; + return nonseekable_open(inode, file); +} + +static int it8712f_wdt_release(struct inode *inode, struct file *file) +{ + if (expect_close != 42) { + pr_warn("watchdog device closed unexpectedly, will not disable the watchdog timer\n"); + } else if (!nowayout) { + if (it8712f_wdt_disable()) + pr_warn("Watchdog disable failed\n"); + } + expect_close = 0; + clear_bit(0, &wdt_open); + + return 0; +} + +static const struct file_operations it8712f_wdt_fops = { + .owner = THIS_MODULE, + .llseek = no_llseek, + .write = it8712f_wdt_write, + .unlocked_ioctl = it8712f_wdt_ioctl, + .open = it8712f_wdt_open, + .release = it8712f_wdt_release, +}; + +static struct miscdevice it8712f_wdt_miscdev = { + .minor = WATCHDOG_MINOR, + .name = "watchdog", + .fops = &it8712f_wdt_fops, +}; + +static int __init it8712f_wdt_find(unsigned short *address) +{ + int err = -ENODEV; + int chip_type; + int ret = superio_enter(); + if (ret) + return ret; + + chip_type = superio_inw(DEVID); + if (chip_type != IT8712F_DEVID) + goto exit; + + superio_select(LDN_GAME); + superio_outb(1, ACT_REG); + if (!(superio_inb(ACT_REG) & 0x01)) { + pr_err("Device not activated, skipping\n"); + goto exit; + } + + *address = superio_inw(BASE_REG); + if (*address == 0) { + pr_err("Base address not set, skipping\n"); + goto exit; + } + + err = 0; + revision = superio_inb(DEVREV) & 0x0f; + + /* Later revisions have 16-bit values per datasheet 0.9.1 */ + if (revision >= 0x08) + max_units = 65535; + + if (margin > (max_units * 60)) + margin = (max_units * 60); + + pr_info("Found IT%04xF chip revision %d - using DogFood address 0x%x\n", + chip_type, revision, *address); + +exit: + superio_exit(); + return err; +} + +static int __init it8712f_wdt_init(void) +{ + int err = 0; + + if (it8712f_wdt_find(&address)) + return -ENODEV; + + if (!request_region(address, 1, "IT8712F Watchdog")) { + pr_warn("watchdog I/O region busy\n"); + return -EBUSY; + } + + err = it8712f_wdt_disable(); + if (err) { + pr_err("unable to disable watchdog timer\n"); + goto out; + } + + err = register_reboot_notifier(&it8712f_wdt_notifier); + if (err) { + pr_err("unable to register reboot notifier\n"); + goto out; + } + + err = misc_register(&it8712f_wdt_miscdev); + if (err) { + pr_err("cannot register miscdev on minor=%d (err=%d)\n", + WATCHDOG_MINOR, err); + goto reboot_out; + } + + return 0; + + +reboot_out: + unregister_reboot_notifier(&it8712f_wdt_notifier); +out: + release_region(address, 1); + return err; +} + +static void __exit it8712f_wdt_exit(void) +{ + misc_deregister(&it8712f_wdt_miscdev); + unregister_reboot_notifier(&it8712f_wdt_notifier); + release_region(address, 1); +} + +module_init(it8712f_wdt_init); +module_exit(it8712f_wdt_exit); diff --git a/drivers/watchdog/it87_wdt.c b/drivers/watchdog/it87_wdt.c new file mode 100644 index 000000000..e96faea24 --- /dev/null +++ b/drivers/watchdog/it87_wdt.c @@ -0,0 +1,365 @@ +/* + * Watchdog Timer Driver + * for ITE IT87xx Environment Control - Low Pin Count Input / Output + * + * (c) Copyright 2007 Oliver Schuster <olivers137@aol.com> + * + * Based on softdog.c by Alan Cox, + * 83977f_wdt.c by Jose Goncalves, + * it87.c by Chris Gauthron, Jean Delvare + * + * Data-sheets: Publicly available at the ITE website + * http://www.ite.com.tw/ + * + * Support of the watchdog timers, which are available on + * IT8607, IT8620, IT8622, IT8625, IT8628, IT8655, IT8665, IT8686, + * IT8702, IT8712, IT8716, IT8718, IT8720, IT8721, IT8726, IT8728, + * and IT8783. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/init.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/types.h> +#include <linux/watchdog.h> + +#define WATCHDOG_NAME "IT87 WDT" + +/* Defaults for Module Parameter */ +#define DEFAULT_TIMEOUT 60 +#define DEFAULT_TESTMODE 0 +#define DEFAULT_NOWAYOUT WATCHDOG_NOWAYOUT + +/* IO Ports */ +#define REG 0x2e +#define VAL 0x2f + +/* Logical device Numbers LDN */ +#define GPIO 0x07 + +/* Configuration Registers and Functions */ +#define LDNREG 0x07 +#define CHIPID 0x20 +#define CHIPREV 0x22 + +/* Chip Id numbers */ +#define NO_DEV_ID 0xffff +#define IT8607_ID 0x8607 +#define IT8620_ID 0x8620 +#define IT8622_ID 0x8622 +#define IT8625_ID 0x8625 +#define IT8628_ID 0x8628 +#define IT8655_ID 0x8655 +#define IT8665_ID 0x8665 +#define IT8686_ID 0x8686 +#define IT8702_ID 0x8702 +#define IT8705_ID 0x8705 +#define IT8712_ID 0x8712 +#define IT8716_ID 0x8716 +#define IT8718_ID 0x8718 +#define IT8720_ID 0x8720 +#define IT8721_ID 0x8721 +#define IT8726_ID 0x8726 /* the data sheet suggest wrongly 0x8716 */ +#define IT8728_ID 0x8728 +#define IT8783_ID 0x8783 + +/* GPIO Configuration Registers LDN=0x07 */ +#define WDTCTRL 0x71 +#define WDTCFG 0x72 +#define WDTVALLSB 0x73 +#define WDTVALMSB 0x74 + +/* GPIO Bits WDTCFG */ +#define WDT_TOV1 0x80 +#define WDT_KRST 0x40 +#define WDT_TOVE 0x20 +#define WDT_PWROK 0x10 /* not in it8721 */ +#define WDT_INT_MASK 0x0f + +static unsigned int max_units, chip_type; + +static unsigned int timeout = DEFAULT_TIMEOUT; +static int testmode = DEFAULT_TESTMODE; +static bool nowayout = DEFAULT_NOWAYOUT; + +module_param(timeout, int, 0); +MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds, default=" + __MODULE_STRING(DEFAULT_TIMEOUT)); +module_param(testmode, int, 0); +MODULE_PARM_DESC(testmode, "Watchdog test mode (1 = no reboot), default=" + __MODULE_STRING(DEFAULT_TESTMODE)); +module_param(nowayout, bool, 0); +MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started, default=" + __MODULE_STRING(WATCHDOG_NOWAYOUT)); + +/* Superio Chip */ + +static inline int superio_enter(void) +{ + /* + * Try to reserve REG and REG + 1 for exclusive access. + */ + if (!request_muxed_region(REG, 2, WATCHDOG_NAME)) + return -EBUSY; + + outb(0x87, REG); + outb(0x01, REG); + outb(0x55, REG); + outb(0x55, REG); + return 0; +} + +static inline void superio_exit(void) +{ + outb(0x02, REG); + outb(0x02, VAL); + release_region(REG, 2); +} + +static inline void superio_select(int ldn) +{ + outb(LDNREG, REG); + outb(ldn, VAL); +} + +static inline int superio_inb(int reg) +{ + outb(reg, REG); + return inb(VAL); +} + +static inline void superio_outb(int val, int reg) +{ + outb(reg, REG); + outb(val, VAL); +} + +static inline int superio_inw(int reg) +{ + int val; + outb(reg++, REG); + val = inb(VAL) << 8; + outb(reg, REG); + val |= inb(VAL); + return val; +} + +static inline void superio_outw(int val, int reg) +{ + outb(reg++, REG); + outb(val >> 8, VAL); + outb(reg, REG); + outb(val, VAL); +} + +/* Internal function, should be called after superio_select(GPIO) */ +static void _wdt_update_timeout(unsigned int t) +{ + unsigned char cfg = WDT_KRST; + + if (testmode) + cfg = 0; + + if (t <= max_units) + cfg |= WDT_TOV1; + else + t /= 60; + + if (chip_type != IT8721_ID) + cfg |= WDT_PWROK; + + superio_outb(cfg, WDTCFG); + superio_outb(t, WDTVALLSB); + if (max_units > 255) + superio_outb(t >> 8, WDTVALMSB); +} + +static int wdt_update_timeout(unsigned int t) +{ + int ret; + + ret = superio_enter(); + if (ret) + return ret; + + superio_select(GPIO); + _wdt_update_timeout(t); + superio_exit(); + + return 0; +} + +static int wdt_round_time(int t) +{ + t += 59; + t -= t % 60; + return t; +} + +/* watchdog timer handling */ + +static int wdt_start(struct watchdog_device *wdd) +{ + return wdt_update_timeout(wdd->timeout); +} + +static int wdt_stop(struct watchdog_device *wdd) +{ + return wdt_update_timeout(0); +} + +/** + * wdt_set_timeout - set a new timeout value with watchdog ioctl + * @t: timeout value in seconds + * + * The hardware device has a 8 or 16 bit watchdog timer (depends on + * chip version) that can be configured to count seconds or minutes. + * + * Used within WDIOC_SETTIMEOUT watchdog device ioctl. + */ + +static int wdt_set_timeout(struct watchdog_device *wdd, unsigned int t) +{ + int ret = 0; + + if (t > max_units) + t = wdt_round_time(t); + + wdd->timeout = t; + + if (watchdog_hw_running(wdd)) + ret = wdt_update_timeout(t); + + return ret; +} + +static const struct watchdog_info ident = { + .options = WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE | WDIOF_KEEPALIVEPING, + .firmware_version = 1, + .identity = WATCHDOG_NAME, +}; + +static const struct watchdog_ops wdt_ops = { + .owner = THIS_MODULE, + .start = wdt_start, + .stop = wdt_stop, + .set_timeout = wdt_set_timeout, +}; + +static struct watchdog_device wdt_dev = { + .info = &ident, + .ops = &wdt_ops, + .min_timeout = 1, +}; + +static int __init it87_wdt_init(void) +{ + u8 chip_rev; + int rc; + + rc = superio_enter(); + if (rc) + return rc; + + chip_type = superio_inw(CHIPID); + chip_rev = superio_inb(CHIPREV) & 0x0f; + superio_exit(); + + switch (chip_type) { + case IT8702_ID: + max_units = 255; + break; + case IT8712_ID: + max_units = (chip_rev < 8) ? 255 : 65535; + break; + case IT8716_ID: + case IT8726_ID: + max_units = 65535; + break; + case IT8607_ID: + case IT8620_ID: + case IT8622_ID: + case IT8625_ID: + case IT8628_ID: + case IT8655_ID: + case IT8665_ID: + case IT8686_ID: + case IT8718_ID: + case IT8720_ID: + case IT8721_ID: + case IT8728_ID: + case IT8783_ID: + max_units = 65535; + break; + case IT8705_ID: + pr_err("Unsupported Chip found, Chip %04x Revision %02x\n", + chip_type, chip_rev); + return -ENODEV; + case NO_DEV_ID: + pr_err("no device\n"); + return -ENODEV; + default: + pr_err("Unknown Chip found, Chip %04x Revision %04x\n", + chip_type, chip_rev); + return -ENODEV; + } + + rc = superio_enter(); + if (rc) + return rc; + + superio_select(GPIO); + superio_outb(WDT_TOV1, WDTCFG); + superio_outb(0x00, WDTCTRL); + superio_exit(); + + if (timeout < 1 || timeout > max_units * 60) { + timeout = DEFAULT_TIMEOUT; + pr_warn("Timeout value out of range, use default %d sec\n", + DEFAULT_TIMEOUT); + } + + if (timeout > max_units) + timeout = wdt_round_time(timeout); + + wdt_dev.timeout = timeout; + wdt_dev.max_timeout = max_units * 60; + + watchdog_stop_on_reboot(&wdt_dev); + rc = watchdog_register_device(&wdt_dev); + if (rc) { + pr_err("Cannot register watchdog device (err=%d)\n", rc); + return rc; + } + + pr_info("Chip IT%04x revision %d initialized. timeout=%d sec (nowayout=%d testmode=%d)\n", + chip_type, chip_rev, timeout, nowayout, testmode); + + return 0; +} + +static void __exit it87_wdt_exit(void) +{ + watchdog_unregister_device(&wdt_dev); +} + +module_init(it87_wdt_init); +module_exit(it87_wdt_exit); + +MODULE_AUTHOR("Oliver Schuster"); +MODULE_DESCRIPTION("Hardware Watchdog Device Driver for IT87xx EC-LPC I/O"); +MODULE_LICENSE("GPL"); diff --git a/drivers/watchdog/ixp4xx_wdt.c b/drivers/watchdog/ixp4xx_wdt.c new file mode 100644 index 000000000..f20cc53ff --- /dev/null +++ b/drivers/watchdog/ixp4xx_wdt.c @@ -0,0 +1,210 @@ +/* + * drivers/char/watchdog/ixp4xx_wdt.c + * + * Watchdog driver for Intel IXP4xx network processors + * + * Author: Deepak Saxena <dsaxena@plexity.net> + * + * Copyright 2004 (c) MontaVista, Software, Inc. + * Based on sa1100 driver, Copyright (C) 2000 Oleg Drokin <green@crimea.edu> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/types.h> +#include <linux/kernel.h> +#include <linux/fs.h> +#include <linux/miscdevice.h> +#include <linux/watchdog.h> +#include <linux/init.h> +#include <linux/bitops.h> +#include <linux/uaccess.h> +#include <mach/hardware.h> + +static bool nowayout = WATCHDOG_NOWAYOUT; +static int heartbeat = 60; /* (secs) Default is 1 minute */ +static unsigned long wdt_status; +static unsigned long boot_status; +static DEFINE_SPINLOCK(wdt_lock); + +#define WDT_TICK_RATE (IXP4XX_PERIPHERAL_BUS_CLOCK * 1000000UL) + +#define WDT_IN_USE 0 +#define WDT_OK_TO_CLOSE 1 + +static void wdt_enable(void) +{ + spin_lock(&wdt_lock); + *IXP4XX_OSWK = IXP4XX_WDT_KEY; + *IXP4XX_OSWE = 0; + *IXP4XX_OSWT = WDT_TICK_RATE * heartbeat; + *IXP4XX_OSWE = IXP4XX_WDT_COUNT_ENABLE | IXP4XX_WDT_RESET_ENABLE; + *IXP4XX_OSWK = 0; + spin_unlock(&wdt_lock); +} + +static void wdt_disable(void) +{ + spin_lock(&wdt_lock); + *IXP4XX_OSWK = IXP4XX_WDT_KEY; + *IXP4XX_OSWE = 0; + *IXP4XX_OSWK = 0; + spin_unlock(&wdt_lock); +} + +static int ixp4xx_wdt_open(struct inode *inode, struct file *file) +{ + if (test_and_set_bit(WDT_IN_USE, &wdt_status)) + return -EBUSY; + + clear_bit(WDT_OK_TO_CLOSE, &wdt_status); + wdt_enable(); + return nonseekable_open(inode, file); +} + +static ssize_t +ixp4xx_wdt_write(struct file *file, const char *data, size_t len, loff_t *ppos) +{ + if (len) { + if (!nowayout) { + size_t i; + + clear_bit(WDT_OK_TO_CLOSE, &wdt_status); + + for (i = 0; i != len; i++) { + char c; + + if (get_user(c, data + i)) + return -EFAULT; + if (c == 'V') + set_bit(WDT_OK_TO_CLOSE, &wdt_status); + } + } + wdt_enable(); + } + return len; +} + +static const struct watchdog_info ident = { + .options = WDIOF_CARDRESET | WDIOF_MAGICCLOSE | + WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING, + .identity = "IXP4xx Watchdog", +}; + + +static long ixp4xx_wdt_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) +{ + int ret = -ENOTTY; + int time; + + switch (cmd) { + case WDIOC_GETSUPPORT: + ret = copy_to_user((struct watchdog_info *)arg, &ident, + sizeof(ident)) ? -EFAULT : 0; + break; + + case WDIOC_GETSTATUS: + ret = put_user(0, (int *)arg); + break; + + case WDIOC_GETBOOTSTATUS: + ret = put_user(boot_status, (int *)arg); + break; + + case WDIOC_KEEPALIVE: + wdt_enable(); + ret = 0; + break; + + case WDIOC_SETTIMEOUT: + ret = get_user(time, (int *)arg); + if (ret) + break; + + if (time <= 0 || time > 60) { + ret = -EINVAL; + break; + } + + heartbeat = time; + wdt_enable(); + /* Fall through */ + + case WDIOC_GETTIMEOUT: + ret = put_user(heartbeat, (int *)arg); + break; + } + return ret; +} + +static int ixp4xx_wdt_release(struct inode *inode, struct file *file) +{ + if (test_bit(WDT_OK_TO_CLOSE, &wdt_status)) + wdt_disable(); + else + pr_crit("Device closed unexpectedly - timer will not stop\n"); + clear_bit(WDT_IN_USE, &wdt_status); + clear_bit(WDT_OK_TO_CLOSE, &wdt_status); + + return 0; +} + + +static const struct file_operations ixp4xx_wdt_fops = { + .owner = THIS_MODULE, + .llseek = no_llseek, + .write = ixp4xx_wdt_write, + .unlocked_ioctl = ixp4xx_wdt_ioctl, + .open = ixp4xx_wdt_open, + .release = ixp4xx_wdt_release, +}; + +static struct miscdevice ixp4xx_wdt_miscdev = { + .minor = WATCHDOG_MINOR, + .name = "watchdog", + .fops = &ixp4xx_wdt_fops, +}; + +static int __init ixp4xx_wdt_init(void) +{ + int ret; + + if (!(read_cpuid_id() & 0xf) && !cpu_is_ixp46x()) { + pr_err("Rev. A0 IXP42x CPU detected - watchdog disabled\n"); + + return -ENODEV; + } + boot_status = (*IXP4XX_OSST & IXP4XX_OSST_TIMER_WARM_RESET) ? + WDIOF_CARDRESET : 0; + ret = misc_register(&ixp4xx_wdt_miscdev); + if (ret == 0) + pr_info("timer heartbeat %d sec\n", heartbeat); + return ret; +} + +static void __exit ixp4xx_wdt_exit(void) +{ + misc_deregister(&ixp4xx_wdt_miscdev); +} + + +module_init(ixp4xx_wdt_init); +module_exit(ixp4xx_wdt_exit); + +MODULE_AUTHOR("Deepak Saxena <dsaxena@plexity.net>"); +MODULE_DESCRIPTION("IXP4xx Network Processor Watchdog"); + +module_param(heartbeat, int, 0); +MODULE_PARM_DESC(heartbeat, "Watchdog heartbeat in seconds (default 60s)"); + +module_param(nowayout, bool, 0); +MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started"); + +MODULE_LICENSE("GPL"); diff --git a/drivers/watchdog/jz4740_wdt.c b/drivers/watchdog/jz4740_wdt.c new file mode 100644 index 000000000..ec4d99a83 --- /dev/null +++ b/drivers/watchdog/jz4740_wdt.c @@ -0,0 +1,222 @@ +/* + * Copyright (C) 2010, Paul Cercueil <paul@crapouillou.net> + * JZ4740 Watchdog driver + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/types.h> +#include <linux/kernel.h> +#include <linux/watchdog.h> +#include <linux/platform_device.h> +#include <linux/io.h> +#include <linux/device.h> +#include <linux/clk.h> +#include <linux/slab.h> +#include <linux/err.h> +#include <linux/of.h> + +#include <asm/mach-jz4740/timer.h> + +#define JZ_REG_WDT_TIMER_DATA 0x0 +#define JZ_REG_WDT_COUNTER_ENABLE 0x4 +#define JZ_REG_WDT_TIMER_COUNTER 0x8 +#define JZ_REG_WDT_TIMER_CONTROL 0xC + +#define JZ_WDT_CLOCK_PCLK 0x1 +#define JZ_WDT_CLOCK_RTC 0x2 +#define JZ_WDT_CLOCK_EXT 0x4 + +#define JZ_WDT_CLOCK_DIV_SHIFT 3 + +#define JZ_WDT_CLOCK_DIV_1 (0 << JZ_WDT_CLOCK_DIV_SHIFT) +#define JZ_WDT_CLOCK_DIV_4 (1 << JZ_WDT_CLOCK_DIV_SHIFT) +#define JZ_WDT_CLOCK_DIV_16 (2 << JZ_WDT_CLOCK_DIV_SHIFT) +#define JZ_WDT_CLOCK_DIV_64 (3 << JZ_WDT_CLOCK_DIV_SHIFT) +#define JZ_WDT_CLOCK_DIV_256 (4 << JZ_WDT_CLOCK_DIV_SHIFT) +#define JZ_WDT_CLOCK_DIV_1024 (5 << JZ_WDT_CLOCK_DIV_SHIFT) + +#define DEFAULT_HEARTBEAT 5 +#define MAX_HEARTBEAT 2048 + +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); +MODULE_PARM_DESC(nowayout, + "Watchdog cannot be stopped once started (default=" + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); + +static unsigned int heartbeat = DEFAULT_HEARTBEAT; +module_param(heartbeat, uint, 0); +MODULE_PARM_DESC(heartbeat, + "Watchdog heartbeat period in seconds from 1 to " + __MODULE_STRING(MAX_HEARTBEAT) ", default " + __MODULE_STRING(DEFAULT_HEARTBEAT)); + +struct jz4740_wdt_drvdata { + struct watchdog_device wdt; + void __iomem *base; + struct clk *rtc_clk; +}; + +static int jz4740_wdt_ping(struct watchdog_device *wdt_dev) +{ + struct jz4740_wdt_drvdata *drvdata = watchdog_get_drvdata(wdt_dev); + + writew(0x0, drvdata->base + JZ_REG_WDT_TIMER_COUNTER); + return 0; +} + +static int jz4740_wdt_set_timeout(struct watchdog_device *wdt_dev, + unsigned int new_timeout) +{ + struct jz4740_wdt_drvdata *drvdata = watchdog_get_drvdata(wdt_dev); + unsigned int rtc_clk_rate; + unsigned int timeout_value; + unsigned short clock_div = JZ_WDT_CLOCK_DIV_1; + + rtc_clk_rate = clk_get_rate(drvdata->rtc_clk); + + timeout_value = rtc_clk_rate * new_timeout; + while (timeout_value > 0xffff) { + if (clock_div == JZ_WDT_CLOCK_DIV_1024) { + /* Requested timeout too high; + * use highest possible value. */ + timeout_value = 0xffff; + break; + } + timeout_value >>= 2; + clock_div += (1 << JZ_WDT_CLOCK_DIV_SHIFT); + } + + writeb(0x0, drvdata->base + JZ_REG_WDT_COUNTER_ENABLE); + writew(clock_div, drvdata->base + JZ_REG_WDT_TIMER_CONTROL); + + writew((u16)timeout_value, drvdata->base + JZ_REG_WDT_TIMER_DATA); + writew(0x0, drvdata->base + JZ_REG_WDT_TIMER_COUNTER); + writew(clock_div | JZ_WDT_CLOCK_RTC, + drvdata->base + JZ_REG_WDT_TIMER_CONTROL); + + writeb(0x1, drvdata->base + JZ_REG_WDT_COUNTER_ENABLE); + + wdt_dev->timeout = new_timeout; + return 0; +} + +static int jz4740_wdt_start(struct watchdog_device *wdt_dev) +{ + jz4740_timer_enable_watchdog(); + jz4740_wdt_set_timeout(wdt_dev, wdt_dev->timeout); + + return 0; +} + +static int jz4740_wdt_stop(struct watchdog_device *wdt_dev) +{ + struct jz4740_wdt_drvdata *drvdata = watchdog_get_drvdata(wdt_dev); + + writeb(0x0, drvdata->base + JZ_REG_WDT_COUNTER_ENABLE); + jz4740_timer_disable_watchdog(); + + return 0; +} + +static int jz4740_wdt_restart(struct watchdog_device *wdt_dev, + unsigned long action, void *data) +{ + wdt_dev->timeout = 0; + jz4740_wdt_start(wdt_dev); + return 0; +} + +static const struct watchdog_info jz4740_wdt_info = { + .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE, + .identity = "jz4740 Watchdog", +}; + +static const struct watchdog_ops jz4740_wdt_ops = { + .owner = THIS_MODULE, + .start = jz4740_wdt_start, + .stop = jz4740_wdt_stop, + .ping = jz4740_wdt_ping, + .set_timeout = jz4740_wdt_set_timeout, + .restart = jz4740_wdt_restart, +}; + +#ifdef CONFIG_OF +static const struct of_device_id jz4740_wdt_of_matches[] = { + { .compatible = "ingenic,jz4740-watchdog", }, + { .compatible = "ingenic,jz4780-watchdog", }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, jz4740_wdt_of_matches); +#endif + +static int jz4740_wdt_probe(struct platform_device *pdev) +{ + struct jz4740_wdt_drvdata *drvdata; + struct watchdog_device *jz4740_wdt; + struct resource *res; + int ret; + + drvdata = devm_kzalloc(&pdev->dev, sizeof(struct jz4740_wdt_drvdata), + GFP_KERNEL); + if (!drvdata) + return -ENOMEM; + + if (heartbeat < 1 || heartbeat > MAX_HEARTBEAT) + heartbeat = DEFAULT_HEARTBEAT; + + jz4740_wdt = &drvdata->wdt; + jz4740_wdt->info = &jz4740_wdt_info; + jz4740_wdt->ops = &jz4740_wdt_ops; + jz4740_wdt->timeout = heartbeat; + jz4740_wdt->min_timeout = 1; + jz4740_wdt->max_timeout = MAX_HEARTBEAT; + jz4740_wdt->parent = &pdev->dev; + watchdog_set_nowayout(jz4740_wdt, nowayout); + watchdog_set_drvdata(jz4740_wdt, drvdata); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + drvdata->base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(drvdata->base)) + return PTR_ERR(drvdata->base); + + drvdata->rtc_clk = devm_clk_get(&pdev->dev, "rtc"); + if (IS_ERR(drvdata->rtc_clk)) { + dev_err(&pdev->dev, "cannot find RTC clock\n"); + return PTR_ERR(drvdata->rtc_clk); + } + + ret = devm_watchdog_register_device(&pdev->dev, &drvdata->wdt); + if (ret < 0) + return ret; + + platform_set_drvdata(pdev, drvdata); + + return 0; +} + +static struct platform_driver jz4740_wdt_driver = { + .probe = jz4740_wdt_probe, + .driver = { + .name = "jz4740-wdt", + .of_match_table = of_match_ptr(jz4740_wdt_of_matches), + }, +}; + +module_platform_driver(jz4740_wdt_driver); + +MODULE_AUTHOR("Paul Cercueil <paul@crapouillou.net>"); +MODULE_DESCRIPTION("jz4740 Watchdog Driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:jz4740-wdt"); diff --git a/drivers/watchdog/kempld_wdt.c b/drivers/watchdog/kempld_wdt.c new file mode 100644 index 000000000..e268add43 --- /dev/null +++ b/drivers/watchdog/kempld_wdt.c @@ -0,0 +1,580 @@ +/* + * Kontron PLD watchdog driver + * + * Copyright (c) 2010-2013 Kontron Europe GmbH + * Author: Michael Brunner <michael.brunner@kontron.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License 2 as published + * by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Note: From the PLD watchdog point of view timeout and pretimeout are + * defined differently than in the kernel. + * First the pretimeout stage runs out before the timeout stage gets + * active. + * + * Kernel/API: P-----| pretimeout + * |-----------------------T timeout + * Watchdog: |-----------------P pretimeout_stage + * |-----T timeout_stage + */ + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/uaccess.h> +#include <linux/watchdog.h> +#include <linux/platform_device.h> +#include <linux/mfd/kempld.h> + +#define KEMPLD_WDT_STAGE_TIMEOUT(x) (0x1b + (x) * 4) +#define KEMPLD_WDT_STAGE_CFG(x) (0x18 + (x)) +#define STAGE_CFG_GET_PRESCALER(x) (((x) & 0x30) >> 4) +#define STAGE_CFG_SET_PRESCALER(x) (((x) & 0x3) << 4) +#define STAGE_CFG_PRESCALER_MASK 0x30 +#define STAGE_CFG_ACTION_MASK 0x7 +#define STAGE_CFG_ASSERT (1 << 3) + +#define KEMPLD_WDT_MAX_STAGES 2 +#define KEMPLD_WDT_KICK 0x16 +#define KEMPLD_WDT_CFG 0x17 +#define KEMPLD_WDT_CFG_ENABLE 0x10 +#define KEMPLD_WDT_CFG_ENABLE_LOCK 0x8 +#define KEMPLD_WDT_CFG_GLOBAL_LOCK 0x80 + +enum { + ACTION_NONE = 0, + ACTION_RESET, + ACTION_NMI, + ACTION_SMI, + ACTION_SCI, + ACTION_DELAY, +}; + +enum { + STAGE_TIMEOUT = 0, + STAGE_PRETIMEOUT, +}; + +enum { + PRESCALER_21 = 0, + PRESCALER_17, + PRESCALER_12, +}; + +static const u32 kempld_prescaler[] = { + [PRESCALER_21] = (1 << 21) - 1, + [PRESCALER_17] = (1 << 17) - 1, + [PRESCALER_12] = (1 << 12) - 1, + 0, +}; + +struct kempld_wdt_stage { + unsigned int id; + u32 mask; +}; + +struct kempld_wdt_data { + struct kempld_device_data *pld; + struct watchdog_device wdd; + unsigned int pretimeout; + struct kempld_wdt_stage stage[KEMPLD_WDT_MAX_STAGES]; +#ifdef CONFIG_PM + u8 pm_status_store; +#endif +}; + +#define DEFAULT_TIMEOUT 30 /* seconds */ +#define DEFAULT_PRETIMEOUT 0 + +static unsigned int timeout = DEFAULT_TIMEOUT; +module_param(timeout, uint, 0); +MODULE_PARM_DESC(timeout, + "Watchdog timeout in seconds. (>=0, default=" + __MODULE_STRING(DEFAULT_TIMEOUT) ")"); + +static unsigned int pretimeout = DEFAULT_PRETIMEOUT; +module_param(pretimeout, uint, 0); +MODULE_PARM_DESC(pretimeout, + "Watchdog pretimeout in seconds. (>=0, default=" + __MODULE_STRING(DEFAULT_PRETIMEOUT) ")"); + +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); +MODULE_PARM_DESC(nowayout, + "Watchdog cannot be stopped once started (default=" + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); + +static int kempld_wdt_set_stage_action(struct kempld_wdt_data *wdt_data, + struct kempld_wdt_stage *stage, + u8 action) +{ + struct kempld_device_data *pld = wdt_data->pld; + u8 stage_cfg; + + if (!stage || !stage->mask) + return -EINVAL; + + kempld_get_mutex(pld); + stage_cfg = kempld_read8(pld, KEMPLD_WDT_STAGE_CFG(stage->id)); + stage_cfg &= ~STAGE_CFG_ACTION_MASK; + stage_cfg |= (action & STAGE_CFG_ACTION_MASK); + + if (action == ACTION_RESET) + stage_cfg |= STAGE_CFG_ASSERT; + else + stage_cfg &= ~STAGE_CFG_ASSERT; + + kempld_write8(pld, KEMPLD_WDT_STAGE_CFG(stage->id), stage_cfg); + kempld_release_mutex(pld); + + return 0; +} + +static int kempld_wdt_set_stage_timeout(struct kempld_wdt_data *wdt_data, + struct kempld_wdt_stage *stage, + unsigned int timeout) +{ + struct kempld_device_data *pld = wdt_data->pld; + u32 prescaler; + u64 stage_timeout64; + u32 stage_timeout; + u32 remainder; + u8 stage_cfg; + + prescaler = kempld_prescaler[PRESCALER_21]; + + if (!stage) + return -EINVAL; + + stage_timeout64 = (u64)timeout * pld->pld_clock; + remainder = do_div(stage_timeout64, prescaler); + if (remainder) + stage_timeout64++; + + if (stage_timeout64 > stage->mask) + return -EINVAL; + + stage_timeout = stage_timeout64 & stage->mask; + + kempld_get_mutex(pld); + stage_cfg = kempld_read8(pld, KEMPLD_WDT_STAGE_CFG(stage->id)); + stage_cfg &= ~STAGE_CFG_PRESCALER_MASK; + stage_cfg |= STAGE_CFG_SET_PRESCALER(PRESCALER_21); + kempld_write8(pld, KEMPLD_WDT_STAGE_CFG(stage->id), stage_cfg); + kempld_write32(pld, KEMPLD_WDT_STAGE_TIMEOUT(stage->id), + stage_timeout); + kempld_release_mutex(pld); + + return 0; +} + +/* + * kempld_get_mutex must be called prior to calling this function. + */ +static unsigned int kempld_wdt_get_timeout(struct kempld_wdt_data *wdt_data, + struct kempld_wdt_stage *stage) +{ + struct kempld_device_data *pld = wdt_data->pld; + unsigned int timeout; + u64 stage_timeout; + u32 prescaler; + u32 remainder; + u8 stage_cfg; + + if (!stage->mask) + return 0; + + stage_cfg = kempld_read8(pld, KEMPLD_WDT_STAGE_CFG(stage->id)); + stage_timeout = kempld_read32(pld, KEMPLD_WDT_STAGE_TIMEOUT(stage->id)); + prescaler = kempld_prescaler[STAGE_CFG_GET_PRESCALER(stage_cfg)]; + + stage_timeout = (stage_timeout & stage->mask) * prescaler; + remainder = do_div(stage_timeout, pld->pld_clock); + if (remainder) + stage_timeout++; + + timeout = stage_timeout; + WARN_ON_ONCE(timeout != stage_timeout); + + return timeout; +} + +static int kempld_wdt_set_timeout(struct watchdog_device *wdd, + unsigned int timeout) +{ + struct kempld_wdt_data *wdt_data = watchdog_get_drvdata(wdd); + struct kempld_wdt_stage *pretimeout_stage; + struct kempld_wdt_stage *timeout_stage; + int ret; + + timeout_stage = &wdt_data->stage[STAGE_TIMEOUT]; + pretimeout_stage = &wdt_data->stage[STAGE_PRETIMEOUT]; + + if (pretimeout_stage->mask && wdt_data->pretimeout > 0) + timeout = wdt_data->pretimeout; + + ret = kempld_wdt_set_stage_action(wdt_data, timeout_stage, + ACTION_RESET); + if (ret) + return ret; + ret = kempld_wdt_set_stage_timeout(wdt_data, timeout_stage, + timeout); + if (ret) + return ret; + + wdd->timeout = timeout; + return 0; +} + +static int kempld_wdt_set_pretimeout(struct watchdog_device *wdd, + unsigned int pretimeout) +{ + struct kempld_wdt_data *wdt_data = watchdog_get_drvdata(wdd); + struct kempld_wdt_stage *pretimeout_stage; + u8 action = ACTION_NONE; + int ret; + + pretimeout_stage = &wdt_data->stage[STAGE_PRETIMEOUT]; + + if (!pretimeout_stage->mask) + return -ENXIO; + + if (pretimeout > wdd->timeout) + return -EINVAL; + + if (pretimeout > 0) + action = ACTION_NMI; + + ret = kempld_wdt_set_stage_action(wdt_data, pretimeout_stage, + action); + if (ret) + return ret; + ret = kempld_wdt_set_stage_timeout(wdt_data, pretimeout_stage, + wdd->timeout - pretimeout); + if (ret) + return ret; + + wdt_data->pretimeout = pretimeout; + return 0; +} + +static void kempld_wdt_update_timeouts(struct kempld_wdt_data *wdt_data) +{ + struct kempld_device_data *pld = wdt_data->pld; + struct kempld_wdt_stage *pretimeout_stage; + struct kempld_wdt_stage *timeout_stage; + unsigned int pretimeout, timeout; + + pretimeout_stage = &wdt_data->stage[STAGE_PRETIMEOUT]; + timeout_stage = &wdt_data->stage[STAGE_TIMEOUT]; + + kempld_get_mutex(pld); + pretimeout = kempld_wdt_get_timeout(wdt_data, pretimeout_stage); + timeout = kempld_wdt_get_timeout(wdt_data, timeout_stage); + kempld_release_mutex(pld); + + if (pretimeout) + wdt_data->pretimeout = timeout; + else + wdt_data->pretimeout = 0; + + wdt_data->wdd.timeout = pretimeout + timeout; +} + +static int kempld_wdt_start(struct watchdog_device *wdd) +{ + struct kempld_wdt_data *wdt_data = watchdog_get_drvdata(wdd); + struct kempld_device_data *pld = wdt_data->pld; + u8 status; + int ret; + + ret = kempld_wdt_set_timeout(wdd, wdd->timeout); + if (ret) + return ret; + + kempld_get_mutex(pld); + status = kempld_read8(pld, KEMPLD_WDT_CFG); + status |= KEMPLD_WDT_CFG_ENABLE; + kempld_write8(pld, KEMPLD_WDT_CFG, status); + status = kempld_read8(pld, KEMPLD_WDT_CFG); + kempld_release_mutex(pld); + + /* Check if the watchdog was enabled */ + if (!(status & KEMPLD_WDT_CFG_ENABLE)) + return -EACCES; + + return 0; +} + +static int kempld_wdt_stop(struct watchdog_device *wdd) +{ + struct kempld_wdt_data *wdt_data = watchdog_get_drvdata(wdd); + struct kempld_device_data *pld = wdt_data->pld; + u8 status; + + kempld_get_mutex(pld); + status = kempld_read8(pld, KEMPLD_WDT_CFG); + status &= ~KEMPLD_WDT_CFG_ENABLE; + kempld_write8(pld, KEMPLD_WDT_CFG, status); + status = kempld_read8(pld, KEMPLD_WDT_CFG); + kempld_release_mutex(pld); + + /* Check if the watchdog was disabled */ + if (status & KEMPLD_WDT_CFG_ENABLE) + return -EACCES; + + return 0; +} + +static int kempld_wdt_keepalive(struct watchdog_device *wdd) +{ + struct kempld_wdt_data *wdt_data = watchdog_get_drvdata(wdd); + struct kempld_device_data *pld = wdt_data->pld; + + kempld_get_mutex(pld); + kempld_write8(pld, KEMPLD_WDT_KICK, 'K'); + kempld_release_mutex(pld); + + return 0; +} + +static long kempld_wdt_ioctl(struct watchdog_device *wdd, unsigned int cmd, + unsigned long arg) +{ + struct kempld_wdt_data *wdt_data = watchdog_get_drvdata(wdd); + void __user *argp = (void __user *)arg; + int ret = -ENOIOCTLCMD; + int __user *p = argp; + int new_value; + + switch (cmd) { + case WDIOC_SETPRETIMEOUT: + if (get_user(new_value, p)) + return -EFAULT; + ret = kempld_wdt_set_pretimeout(wdd, new_value); + if (ret) + return ret; + ret = kempld_wdt_keepalive(wdd); + break; + case WDIOC_GETPRETIMEOUT: + ret = put_user(wdt_data->pretimeout, (int __user *)arg); + break; + } + + return ret; +} + +static int kempld_wdt_probe_stages(struct watchdog_device *wdd) +{ + struct kempld_wdt_data *wdt_data = watchdog_get_drvdata(wdd); + struct kempld_device_data *pld = wdt_data->pld; + struct kempld_wdt_stage *pretimeout_stage; + struct kempld_wdt_stage *timeout_stage; + u8 index, data, data_orig; + u32 mask; + int i, j; + + pretimeout_stage = &wdt_data->stage[STAGE_PRETIMEOUT]; + timeout_stage = &wdt_data->stage[STAGE_TIMEOUT]; + + pretimeout_stage->mask = 0; + timeout_stage->mask = 0; + + for (i = 0; i < 3; i++) { + index = KEMPLD_WDT_STAGE_TIMEOUT(i); + mask = 0; + + kempld_get_mutex(pld); + /* Probe each byte individually. */ + for (j = 0; j < 4; j++) { + data_orig = kempld_read8(pld, index + j); + kempld_write8(pld, index + j, 0x00); + data = kempld_read8(pld, index + j); + /* A failed write means this byte is reserved */ + if (data != 0x00) + break; + kempld_write8(pld, index + j, data_orig); + mask |= 0xff << (j * 8); + } + kempld_release_mutex(pld); + + /* Assign available stages to timeout and pretimeout */ + if (!timeout_stage->mask) { + timeout_stage->mask = mask; + timeout_stage->id = i; + } else { + if (pld->feature_mask & KEMPLD_FEATURE_BIT_NMI) { + pretimeout_stage->mask = timeout_stage->mask; + timeout_stage->mask = mask; + pretimeout_stage->id = timeout_stage->id; + timeout_stage->id = i; + } + break; + } + } + + if (!timeout_stage->mask) + return -ENODEV; + + return 0; +} + +static const struct watchdog_info kempld_wdt_info = { + .identity = "KEMPLD Watchdog", + .options = WDIOF_SETTIMEOUT | + WDIOF_KEEPALIVEPING | + WDIOF_MAGICCLOSE | + WDIOF_PRETIMEOUT +}; + +static const struct watchdog_ops kempld_wdt_ops = { + .owner = THIS_MODULE, + .start = kempld_wdt_start, + .stop = kempld_wdt_stop, + .ping = kempld_wdt_keepalive, + .set_timeout = kempld_wdt_set_timeout, + .ioctl = kempld_wdt_ioctl, +}; + +static int kempld_wdt_probe(struct platform_device *pdev) +{ + struct kempld_device_data *pld = dev_get_drvdata(pdev->dev.parent); + struct kempld_wdt_data *wdt_data; + struct device *dev = &pdev->dev; + struct watchdog_device *wdd; + u8 status; + int ret = 0; + + wdt_data = devm_kzalloc(dev, sizeof(*wdt_data), GFP_KERNEL); + if (!wdt_data) + return -ENOMEM; + + wdt_data->pld = pld; + wdd = &wdt_data->wdd; + wdd->parent = dev; + + kempld_get_mutex(pld); + status = kempld_read8(pld, KEMPLD_WDT_CFG); + kempld_release_mutex(pld); + + /* Enable nowayout if watchdog is already locked */ + if (status & (KEMPLD_WDT_CFG_ENABLE_LOCK | + KEMPLD_WDT_CFG_GLOBAL_LOCK)) { + if (!nowayout) + dev_warn(dev, + "Forcing nowayout - watchdog lock enabled!\n"); + nowayout = true; + } + + wdd->info = &kempld_wdt_info; + wdd->ops = &kempld_wdt_ops; + + watchdog_set_drvdata(wdd, wdt_data); + watchdog_set_nowayout(wdd, nowayout); + + ret = kempld_wdt_probe_stages(wdd); + if (ret) + return ret; + + kempld_wdt_set_timeout(wdd, timeout); + kempld_wdt_set_pretimeout(wdd, pretimeout); + + /* Check if watchdog is already enabled */ + if (status & KEMPLD_WDT_CFG_ENABLE) { + /* Get current watchdog settings */ + kempld_wdt_update_timeouts(wdt_data); + dev_info(dev, "Watchdog was already enabled\n"); + } + + platform_set_drvdata(pdev, wdt_data); + ret = watchdog_register_device(wdd); + if (ret) + return ret; + + dev_info(dev, "Watchdog registered with %ds timeout\n", wdd->timeout); + + return 0; +} + +static void kempld_wdt_shutdown(struct platform_device *pdev) +{ + struct kempld_wdt_data *wdt_data = platform_get_drvdata(pdev); + + kempld_wdt_stop(&wdt_data->wdd); +} + +static int kempld_wdt_remove(struct platform_device *pdev) +{ + struct kempld_wdt_data *wdt_data = platform_get_drvdata(pdev); + struct watchdog_device *wdd = &wdt_data->wdd; + int ret = 0; + + if (!nowayout) + ret = kempld_wdt_stop(wdd); + watchdog_unregister_device(wdd); + + return ret; +} + +#ifdef CONFIG_PM +/* Disable watchdog if it is active during suspend */ +static int kempld_wdt_suspend(struct platform_device *pdev, + pm_message_t message) +{ + struct kempld_wdt_data *wdt_data = platform_get_drvdata(pdev); + struct kempld_device_data *pld = wdt_data->pld; + struct watchdog_device *wdd = &wdt_data->wdd; + + kempld_get_mutex(pld); + wdt_data->pm_status_store = kempld_read8(pld, KEMPLD_WDT_CFG); + kempld_release_mutex(pld); + + kempld_wdt_update_timeouts(wdt_data); + + if (wdt_data->pm_status_store & KEMPLD_WDT_CFG_ENABLE) + return kempld_wdt_stop(wdd); + + return 0; +} + +/* Enable watchdog and configure it if necessary */ +static int kempld_wdt_resume(struct platform_device *pdev) +{ + struct kempld_wdt_data *wdt_data = platform_get_drvdata(pdev); + struct watchdog_device *wdd = &wdt_data->wdd; + + /* + * If watchdog was stopped before suspend be sure it gets disabled + * again, for the case BIOS has enabled it during resume + */ + if (wdt_data->pm_status_store & KEMPLD_WDT_CFG_ENABLE) + return kempld_wdt_start(wdd); + else + return kempld_wdt_stop(wdd); +} +#else +#define kempld_wdt_suspend NULL +#define kempld_wdt_resume NULL +#endif + +static struct platform_driver kempld_wdt_driver = { + .driver = { + .name = "kempld-wdt", + }, + .probe = kempld_wdt_probe, + .remove = kempld_wdt_remove, + .shutdown = kempld_wdt_shutdown, + .suspend = kempld_wdt_suspend, + .resume = kempld_wdt_resume, +}; + +module_platform_driver(kempld_wdt_driver); + +MODULE_DESCRIPTION("KEM PLD Watchdog Driver"); +MODULE_AUTHOR("Michael Brunner <michael.brunner@kontron.com>"); +MODULE_LICENSE("GPL"); diff --git a/drivers/watchdog/ks8695_wdt.c b/drivers/watchdog/ks8695_wdt.c new file mode 100644 index 000000000..1e41818a4 --- /dev/null +++ b/drivers/watchdog/ks8695_wdt.c @@ -0,0 +1,322 @@ +/* + * Watchdog driver for Kendin/Micrel KS8695. + * + * (C) 2007 Andrew Victor + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/bitops.h> +#include <linux/errno.h> +#include <linux/fs.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/miscdevice.h> +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/platform_device.h> +#include <linux/types.h> +#include <linux/watchdog.h> +#include <linux/io.h> +#include <linux/uaccess.h> +#include <mach/hardware.h> + +#define KS8695_TMR_OFFSET (0xF0000 + 0xE400) +#define KS8695_TMR_VA (KS8695_IO_VA + KS8695_TMR_OFFSET) + +/* + * Timer registers + */ +#define KS8695_TMCON (0x00) /* Timer Control Register */ +#define KS8695_T0TC (0x08) /* Timer 0 Timeout Count Register */ +#define TMCON_T0EN (1 << 0) /* Timer 0 Enable */ + +/* Timer0 Timeout Counter Register */ +#define T0TC_WATCHDOG (0xff) /* Enable watchdog mode */ + +#define WDT_DEFAULT_TIME 5 /* seconds */ +#define WDT_MAX_TIME 171 /* seconds */ + +static int wdt_time = WDT_DEFAULT_TIME; +static bool nowayout = WATCHDOG_NOWAYOUT; + +module_param(wdt_time, int, 0); +MODULE_PARM_DESC(wdt_time, "Watchdog time in seconds. (default=" + __MODULE_STRING(WDT_DEFAULT_TIME) ")"); + +#ifdef CONFIG_WATCHDOG_NOWAYOUT +module_param(nowayout, bool, 0); +MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); +#endif + + +static unsigned long ks8695wdt_busy; +static DEFINE_SPINLOCK(ks8695_lock); + +/* ......................................................................... */ + +/* + * Disable the watchdog. + */ +static inline void ks8695_wdt_stop(void) +{ + unsigned long tmcon; + + spin_lock(&ks8695_lock); + /* disable timer0 */ + tmcon = __raw_readl(KS8695_TMR_VA + KS8695_TMCON); + __raw_writel(tmcon & ~TMCON_T0EN, KS8695_TMR_VA + KS8695_TMCON); + spin_unlock(&ks8695_lock); +} + +/* + * Enable and reset the watchdog. + */ +static inline void ks8695_wdt_start(void) +{ + unsigned long tmcon; + unsigned long tval = wdt_time * KS8695_CLOCK_RATE; + + spin_lock(&ks8695_lock); + /* disable timer0 */ + tmcon = __raw_readl(KS8695_TMR_VA + KS8695_TMCON); + __raw_writel(tmcon & ~TMCON_T0EN, KS8695_TMR_VA + KS8695_TMCON); + + /* program timer0 */ + __raw_writel(tval | T0TC_WATCHDOG, KS8695_TMR_VA + KS8695_T0TC); + + /* re-enable timer0 */ + tmcon = __raw_readl(KS8695_TMR_VA + KS8695_TMCON); + __raw_writel(tmcon | TMCON_T0EN, KS8695_TMR_VA + KS8695_TMCON); + spin_unlock(&ks8695_lock); +} + +/* + * Reload the watchdog timer. (ie, pat the watchdog) + */ +static inline void ks8695_wdt_reload(void) +{ + unsigned long tmcon; + + spin_lock(&ks8695_lock); + /* disable, then re-enable timer0 */ + tmcon = __raw_readl(KS8695_TMR_VA + KS8695_TMCON); + __raw_writel(tmcon & ~TMCON_T0EN, KS8695_TMR_VA + KS8695_TMCON); + __raw_writel(tmcon | TMCON_T0EN, KS8695_TMR_VA + KS8695_TMCON); + spin_unlock(&ks8695_lock); +} + +/* + * Change the watchdog time interval. + */ +static int ks8695_wdt_settimeout(int new_time) +{ + /* + * All counting occurs at KS8695_CLOCK_RATE / 128 = 0.256 Hz + * + * Since WDV is a 16-bit counter, the maximum period is + * 65536 / 0.256 = 256 seconds. + */ + if ((new_time <= 0) || (new_time > WDT_MAX_TIME)) + return -EINVAL; + + /* Set new watchdog time. It will be used when + ks8695_wdt_start() is called. */ + wdt_time = new_time; + return 0; +} + +/* ......................................................................... */ + +/* + * Watchdog device is opened, and watchdog starts running. + */ +static int ks8695_wdt_open(struct inode *inode, struct file *file) +{ + if (test_and_set_bit(0, &ks8695wdt_busy)) + return -EBUSY; + + ks8695_wdt_start(); + return nonseekable_open(inode, file); +} + +/* + * Close the watchdog device. + * If CONFIG_WATCHDOG_NOWAYOUT is NOT defined then the watchdog is also + * disabled. + */ +static int ks8695_wdt_close(struct inode *inode, struct file *file) +{ + /* Disable the watchdog when file is closed */ + if (!nowayout) + ks8695_wdt_stop(); + clear_bit(0, &ks8695wdt_busy); + return 0; +} + +static const struct watchdog_info ks8695_wdt_info = { + .identity = "ks8695 watchdog", + .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING, +}; + +/* + * Handle commands from user-space. + */ +static long ks8695_wdt_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) +{ + void __user *argp = (void __user *)arg; + int __user *p = argp; + int new_value; + + switch (cmd) { + case WDIOC_GETSUPPORT: + return copy_to_user(argp, &ks8695_wdt_info, + sizeof(ks8695_wdt_info)) ? -EFAULT : 0; + case WDIOC_GETSTATUS: + case WDIOC_GETBOOTSTATUS: + return put_user(0, p); + case WDIOC_SETOPTIONS: + if (get_user(new_value, p)) + return -EFAULT; + if (new_value & WDIOS_DISABLECARD) + ks8695_wdt_stop(); + if (new_value & WDIOS_ENABLECARD) + ks8695_wdt_start(); + return 0; + case WDIOC_KEEPALIVE: + ks8695_wdt_reload(); /* pat the watchdog */ + return 0; + case WDIOC_SETTIMEOUT: + if (get_user(new_value, p)) + return -EFAULT; + if (ks8695_wdt_settimeout(new_value)) + return -EINVAL; + /* Enable new time value */ + ks8695_wdt_start(); + /* Return current value */ + return put_user(wdt_time, p); + case WDIOC_GETTIMEOUT: + return put_user(wdt_time, p); + default: + return -ENOTTY; + } +} + +/* + * Pat the watchdog whenever device is written to. + */ +static ssize_t ks8695_wdt_write(struct file *file, const char *data, + size_t len, loff_t *ppos) +{ + ks8695_wdt_reload(); /* pat the watchdog */ + return len; +} + +/* ......................................................................... */ + +static const struct file_operations ks8695wdt_fops = { + .owner = THIS_MODULE, + .llseek = no_llseek, + .unlocked_ioctl = ks8695_wdt_ioctl, + .open = ks8695_wdt_open, + .release = ks8695_wdt_close, + .write = ks8695_wdt_write, +}; + +static struct miscdevice ks8695wdt_miscdev = { + .minor = WATCHDOG_MINOR, + .name = "watchdog", + .fops = &ks8695wdt_fops, +}; + +static int ks8695wdt_probe(struct platform_device *pdev) +{ + int res; + + if (ks8695wdt_miscdev.parent) + return -EBUSY; + ks8695wdt_miscdev.parent = &pdev->dev; + + res = misc_register(&ks8695wdt_miscdev); + if (res) + return res; + + pr_info("KS8695 Watchdog Timer enabled (%d seconds%s)\n", + wdt_time, nowayout ? ", nowayout" : ""); + return 0; +} + +static int ks8695wdt_remove(struct platform_device *pdev) +{ + misc_deregister(&ks8695wdt_miscdev); + ks8695wdt_miscdev.parent = NULL; + + return 0; +} + +static void ks8695wdt_shutdown(struct platform_device *pdev) +{ + ks8695_wdt_stop(); +} + +#ifdef CONFIG_PM + +static int ks8695wdt_suspend(struct platform_device *pdev, pm_message_t message) +{ + ks8695_wdt_stop(); + return 0; +} + +static int ks8695wdt_resume(struct platform_device *pdev) +{ + if (ks8695wdt_busy) + ks8695_wdt_start(); + return 0; +} + +#else +#define ks8695wdt_suspend NULL +#define ks8695wdt_resume NULL +#endif + +static struct platform_driver ks8695wdt_driver = { + .probe = ks8695wdt_probe, + .remove = ks8695wdt_remove, + .shutdown = ks8695wdt_shutdown, + .suspend = ks8695wdt_suspend, + .resume = ks8695wdt_resume, + .driver = { + .name = "ks8695_wdt", + }, +}; + +static int __init ks8695_wdt_init(void) +{ + /* Check that the heartbeat value is within range; + if not reset to the default */ + if (ks8695_wdt_settimeout(wdt_time)) { + ks8695_wdt_settimeout(WDT_DEFAULT_TIME); + pr_info("ks8695_wdt: wdt_time value must be 1 <= wdt_time <= %i" + ", using %d\n", wdt_time, WDT_MAX_TIME); + } + return platform_driver_register(&ks8695wdt_driver); +} + +static void __exit ks8695_wdt_exit(void) +{ + platform_driver_unregister(&ks8695wdt_driver); +} + +module_init(ks8695_wdt_init); +module_exit(ks8695_wdt_exit); + +MODULE_AUTHOR("Andrew Victor"); +MODULE_DESCRIPTION("Watchdog driver for KS8695"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:ks8695_wdt"); diff --git a/drivers/watchdog/lantiq_wdt.c b/drivers/watchdog/lantiq_wdt.c new file mode 100644 index 000000000..7f43cefa0 --- /dev/null +++ b/drivers/watchdog/lantiq_wdt.c @@ -0,0 +1,309 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Copyright (C) 2010 John Crispin <john@phrozen.org> + * Copyright (C) 2017 Hauke Mehrtens <hauke@hauke-m.de> + * Based on EP93xx wdt driver + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/module.h> +#include <linux/fs.h> +#include <linux/miscdevice.h> +#include <linux/watchdog.h> +#include <linux/of_platform.h> +#include <linux/uaccess.h> +#include <linux/clk.h> +#include <linux/io.h> +#include <linux/regmap.h> +#include <linux/mfd/syscon.h> + +#include <lantiq_soc.h> + +#define LTQ_XRX_RCU_RST_STAT 0x0014 +#define LTQ_XRX_RCU_RST_STAT_WDT BIT(31) + +/* CPU0 Reset Source Register */ +#define LTQ_FALCON_SYS1_CPU0RS 0x0060 +/* reset cause mask */ +#define LTQ_FALCON_SYS1_CPU0RS_MASK 0x0007 +#define LTQ_FALCON_SYS1_CPU0RS_WDT 0x02 + +/* + * Section 3.4 of the datasheet + * The password sequence protects the WDT control register from unintended + * write actions, which might cause malfunction of the WDT. + * + * essentially the following two magic passwords need to be written to allow + * IO access to the WDT core + */ +#define LTQ_WDT_PW1 0x00BE0000 +#define LTQ_WDT_PW2 0x00DC0000 + +#define LTQ_WDT_CR 0x0 /* watchdog control register */ +#define LTQ_WDT_SR 0x8 /* watchdog status register */ + +#define LTQ_WDT_SR_EN (0x1 << 31) /* enable bit */ +#define LTQ_WDT_SR_PWD (0x3 << 26) /* turn on power */ +#define LTQ_WDT_SR_CLKDIV (0x3 << 24) /* turn on clock and set */ + /* divider to 0x40000 */ +#define LTQ_WDT_DIVIDER 0x40000 +#define LTQ_MAX_TIMEOUT ((1 << 16) - 1) /* the reload field is 16 bit */ + +static bool nowayout = WATCHDOG_NOWAYOUT; + +static void __iomem *ltq_wdt_membase; +static unsigned long ltq_io_region_clk_rate; + +static unsigned long ltq_wdt_bootstatus; +static unsigned long ltq_wdt_in_use; +static int ltq_wdt_timeout = 30; +static int ltq_wdt_ok_to_close; + +static void +ltq_wdt_enable(void) +{ + unsigned long int timeout = ltq_wdt_timeout * + (ltq_io_region_clk_rate / LTQ_WDT_DIVIDER) + 0x1000; + if (timeout > LTQ_MAX_TIMEOUT) + timeout = LTQ_MAX_TIMEOUT; + + /* write the first password magic */ + ltq_w32(LTQ_WDT_PW1, ltq_wdt_membase + LTQ_WDT_CR); + /* write the second magic plus the configuration and new timeout */ + ltq_w32(LTQ_WDT_SR_EN | LTQ_WDT_SR_PWD | LTQ_WDT_SR_CLKDIV | + LTQ_WDT_PW2 | timeout, ltq_wdt_membase + LTQ_WDT_CR); +} + +static void +ltq_wdt_disable(void) +{ + /* write the first password magic */ + ltq_w32(LTQ_WDT_PW1, ltq_wdt_membase + LTQ_WDT_CR); + /* + * write the second password magic with no config + * this turns the watchdog off + */ + ltq_w32(LTQ_WDT_PW2, ltq_wdt_membase + LTQ_WDT_CR); +} + +static ssize_t +ltq_wdt_write(struct file *file, const char __user *data, + size_t len, loff_t *ppos) +{ + if (len) { + if (!nowayout) { + size_t i; + + ltq_wdt_ok_to_close = 0; + for (i = 0; i != len; i++) { + char c; + + if (get_user(c, data + i)) + return -EFAULT; + if (c == 'V') + ltq_wdt_ok_to_close = 1; + else + ltq_wdt_ok_to_close = 0; + } + } + ltq_wdt_enable(); + } + + return len; +} + +static struct watchdog_info ident = { + .options = WDIOF_MAGICCLOSE | WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | + WDIOF_CARDRESET, + .identity = "ltq_wdt", +}; + +static long +ltq_wdt_ioctl(struct file *file, + unsigned int cmd, unsigned long arg) +{ + int ret = -ENOTTY; + + switch (cmd) { + case WDIOC_GETSUPPORT: + ret = copy_to_user((struct watchdog_info __user *)arg, &ident, + sizeof(ident)) ? -EFAULT : 0; + break; + + case WDIOC_GETBOOTSTATUS: + ret = put_user(ltq_wdt_bootstatus, (int __user *)arg); + break; + + case WDIOC_GETSTATUS: + ret = put_user(0, (int __user *)arg); + break; + + case WDIOC_SETTIMEOUT: + ret = get_user(ltq_wdt_timeout, (int __user *)arg); + if (!ret) + ltq_wdt_enable(); + /* intentional drop through */ + case WDIOC_GETTIMEOUT: + ret = put_user(ltq_wdt_timeout, (int __user *)arg); + break; + + case WDIOC_KEEPALIVE: + ltq_wdt_enable(); + ret = 0; + break; + } + return ret; +} + +static int +ltq_wdt_open(struct inode *inode, struct file *file) +{ + if (test_and_set_bit(0, <q_wdt_in_use)) + return -EBUSY; + ltq_wdt_in_use = 1; + ltq_wdt_enable(); + + return nonseekable_open(inode, file); +} + +static int +ltq_wdt_release(struct inode *inode, struct file *file) +{ + if (ltq_wdt_ok_to_close) + ltq_wdt_disable(); + else + pr_err("watchdog closed without warning\n"); + ltq_wdt_ok_to_close = 0; + clear_bit(0, <q_wdt_in_use); + + return 0; +} + +static const struct file_operations ltq_wdt_fops = { + .owner = THIS_MODULE, + .write = ltq_wdt_write, + .unlocked_ioctl = ltq_wdt_ioctl, + .open = ltq_wdt_open, + .release = ltq_wdt_release, + .llseek = no_llseek, +}; + +static struct miscdevice ltq_wdt_miscdev = { + .minor = WATCHDOG_MINOR, + .name = "watchdog", + .fops = <q_wdt_fops, +}; + +typedef int (*ltq_wdt_bootstatus_set)(struct platform_device *pdev); + +static int ltq_wdt_bootstatus_xrx(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct regmap *rcu_regmap; + u32 val; + int err; + + rcu_regmap = syscon_regmap_lookup_by_phandle(dev->of_node, "regmap"); + if (IS_ERR(rcu_regmap)) + return PTR_ERR(rcu_regmap); + + err = regmap_read(rcu_regmap, LTQ_XRX_RCU_RST_STAT, &val); + if (err) + return err; + + if (val & LTQ_XRX_RCU_RST_STAT_WDT) + ltq_wdt_bootstatus = WDIOF_CARDRESET; + + return 0; +} + +static int ltq_wdt_bootstatus_falcon(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct regmap *rcu_regmap; + u32 val; + int err; + + rcu_regmap = syscon_regmap_lookup_by_phandle(dev->of_node, + "lantiq,rcu"); + if (IS_ERR(rcu_regmap)) + return PTR_ERR(rcu_regmap); + + err = regmap_read(rcu_regmap, LTQ_FALCON_SYS1_CPU0RS, &val); + if (err) + return err; + + if ((val & LTQ_FALCON_SYS1_CPU0RS_MASK) == LTQ_FALCON_SYS1_CPU0RS_WDT) + ltq_wdt_bootstatus = WDIOF_CARDRESET; + + return 0; +} + +static int +ltq_wdt_probe(struct platform_device *pdev) +{ + struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + struct clk *clk; + ltq_wdt_bootstatus_set ltq_wdt_bootstatus_set; + int ret; + + ltq_wdt_membase = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(ltq_wdt_membase)) + return PTR_ERR(ltq_wdt_membase); + + ltq_wdt_bootstatus_set = of_device_get_match_data(&pdev->dev); + if (ltq_wdt_bootstatus_set) { + ret = ltq_wdt_bootstatus_set(pdev); + if (ret) + return ret; + } + + /* we do not need to enable the clock as it is always running */ + clk = clk_get_io(); + if (IS_ERR(clk)) { + dev_err(&pdev->dev, "Failed to get clock\n"); + return -ENOENT; + } + ltq_io_region_clk_rate = clk_get_rate(clk); + clk_put(clk); + + dev_info(&pdev->dev, "Init done\n"); + return misc_register(<q_wdt_miscdev); +} + +static int +ltq_wdt_remove(struct platform_device *pdev) +{ + misc_deregister(<q_wdt_miscdev); + + return 0; +} + +static const struct of_device_id ltq_wdt_match[] = { + { .compatible = "lantiq,wdt", .data = NULL}, + { .compatible = "lantiq,xrx100-wdt", .data = ltq_wdt_bootstatus_xrx }, + { .compatible = "lantiq,falcon-wdt", .data = ltq_wdt_bootstatus_falcon }, + {}, +}; +MODULE_DEVICE_TABLE(of, ltq_wdt_match); + +static struct platform_driver ltq_wdt_driver = { + .probe = ltq_wdt_probe, + .remove = ltq_wdt_remove, + .driver = { + .name = "wdt", + .of_match_table = ltq_wdt_match, + }, +}; + +module_platform_driver(ltq_wdt_driver); + +module_param(nowayout, bool, 0); +MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started"); +MODULE_AUTHOR("John Crispin <john@phrozen.org>"); +MODULE_DESCRIPTION("Lantiq SoC Watchdog"); +MODULE_LICENSE("GPL"); diff --git a/drivers/watchdog/loongson1_wdt.c b/drivers/watchdog/loongson1_wdt.c new file mode 100644 index 000000000..3aee50c64 --- /dev/null +++ b/drivers/watchdog/loongson1_wdt.c @@ -0,0 +1,170 @@ +/* + * Copyright (c) 2016 Yang Ling <gnaygnil@gmail.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/clk.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/watchdog.h> +#include <loongson1.h> + +#define DEFAULT_HEARTBEAT 30 + +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0444); + +static unsigned int heartbeat; +module_param(heartbeat, uint, 0444); + +struct ls1x_wdt_drvdata { + void __iomem *base; + struct clk *clk; + unsigned long clk_rate; + struct watchdog_device wdt; +}; + +static int ls1x_wdt_ping(struct watchdog_device *wdt_dev) +{ + struct ls1x_wdt_drvdata *drvdata = watchdog_get_drvdata(wdt_dev); + + writel(0x1, drvdata->base + WDT_SET); + + return 0; +} + +static int ls1x_wdt_set_timeout(struct watchdog_device *wdt_dev, + unsigned int timeout) +{ + struct ls1x_wdt_drvdata *drvdata = watchdog_get_drvdata(wdt_dev); + unsigned int max_hw_heartbeat = wdt_dev->max_hw_heartbeat_ms / 1000; + unsigned int counts; + + wdt_dev->timeout = timeout; + + counts = drvdata->clk_rate * min(timeout, max_hw_heartbeat); + writel(counts, drvdata->base + WDT_TIMER); + + return 0; +} + +static int ls1x_wdt_start(struct watchdog_device *wdt_dev) +{ + struct ls1x_wdt_drvdata *drvdata = watchdog_get_drvdata(wdt_dev); + + writel(0x1, drvdata->base + WDT_EN); + + return 0; +} + +static int ls1x_wdt_stop(struct watchdog_device *wdt_dev) +{ + struct ls1x_wdt_drvdata *drvdata = watchdog_get_drvdata(wdt_dev); + + writel(0x0, drvdata->base + WDT_EN); + + return 0; +} + +static const struct watchdog_info ls1x_wdt_info = { + .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE, + .identity = "Loongson1 Watchdog", +}; + +static const struct watchdog_ops ls1x_wdt_ops = { + .owner = THIS_MODULE, + .start = ls1x_wdt_start, + .stop = ls1x_wdt_stop, + .ping = ls1x_wdt_ping, + .set_timeout = ls1x_wdt_set_timeout, +}; + +static int ls1x_wdt_probe(struct platform_device *pdev) +{ + struct ls1x_wdt_drvdata *drvdata; + struct watchdog_device *ls1x_wdt; + unsigned long clk_rate; + struct resource *res; + int err; + + drvdata = devm_kzalloc(&pdev->dev, sizeof(*drvdata), GFP_KERNEL); + if (!drvdata) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + drvdata->base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(drvdata->base)) + return PTR_ERR(drvdata->base); + + drvdata->clk = devm_clk_get(&pdev->dev, pdev->name); + if (IS_ERR(drvdata->clk)) + return PTR_ERR(drvdata->clk); + + err = clk_prepare_enable(drvdata->clk); + if (err) { + dev_err(&pdev->dev, "clk enable failed\n"); + return err; + } + + clk_rate = clk_get_rate(drvdata->clk); + if (!clk_rate) { + err = -EINVAL; + goto err0; + } + drvdata->clk_rate = clk_rate; + + ls1x_wdt = &drvdata->wdt; + ls1x_wdt->info = &ls1x_wdt_info; + ls1x_wdt->ops = &ls1x_wdt_ops; + ls1x_wdt->timeout = DEFAULT_HEARTBEAT; + ls1x_wdt->min_timeout = 1; + ls1x_wdt->max_hw_heartbeat_ms = U32_MAX / clk_rate * 1000; + ls1x_wdt->parent = &pdev->dev; + + watchdog_init_timeout(ls1x_wdt, heartbeat, &pdev->dev); + watchdog_set_nowayout(ls1x_wdt, nowayout); + watchdog_set_drvdata(ls1x_wdt, drvdata); + + err = watchdog_register_device(&drvdata->wdt); + if (err) { + dev_err(&pdev->dev, "failed to register watchdog device\n"); + goto err0; + } + + platform_set_drvdata(pdev, drvdata); + + dev_info(&pdev->dev, "Loongson1 Watchdog driver registered\n"); + + return 0; +err0: + clk_disable_unprepare(drvdata->clk); + return err; +} + +static int ls1x_wdt_remove(struct platform_device *pdev) +{ + struct ls1x_wdt_drvdata *drvdata = platform_get_drvdata(pdev); + + watchdog_unregister_device(&drvdata->wdt); + clk_disable_unprepare(drvdata->clk); + + return 0; +} + +static struct platform_driver ls1x_wdt_driver = { + .probe = ls1x_wdt_probe, + .remove = ls1x_wdt_remove, + .driver = { + .name = "ls1x-wdt", + }, +}; + +module_platform_driver(ls1x_wdt_driver); + +MODULE_AUTHOR("Yang Ling <gnaygnil@gmail.com>"); +MODULE_DESCRIPTION("Loongson1 Watchdog Driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/watchdog/lpc18xx_wdt.c b/drivers/watchdog/lpc18xx_wdt.c new file mode 100644 index 000000000..48580b640 --- /dev/null +++ b/drivers/watchdog/lpc18xx_wdt.c @@ -0,0 +1,332 @@ +/* + * NXP LPC18xx Watchdog Timer (WDT) + * + * Copyright (c) 2015 Ariel D'Alessandro <ariel@vanguardiasur.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * Notes + * ----- + * The Watchdog consists of a fixed divide-by-4 clock pre-scaler and a 24-bit + * counter which decrements on every clock cycle. + */ + +#include <linux/clk.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/watchdog.h> + +/* Registers */ +#define LPC18XX_WDT_MOD 0x00 +#define LPC18XX_WDT_MOD_WDEN BIT(0) +#define LPC18XX_WDT_MOD_WDRESET BIT(1) + +#define LPC18XX_WDT_TC 0x04 +#define LPC18XX_WDT_TC_MIN 0xff +#define LPC18XX_WDT_TC_MAX 0xffffff + +#define LPC18XX_WDT_FEED 0x08 +#define LPC18XX_WDT_FEED_MAGIC1 0xaa +#define LPC18XX_WDT_FEED_MAGIC2 0x55 + +#define LPC18XX_WDT_TV 0x0c + +/* Clock pre-scaler */ +#define LPC18XX_WDT_CLK_DIV 4 + +/* Timeout values in seconds */ +#define LPC18XX_WDT_DEF_TIMEOUT 30U + +static int heartbeat; +module_param(heartbeat, int, 0); +MODULE_PARM_DESC(heartbeat, "Watchdog heartbeats in seconds (default=" + __MODULE_STRING(LPC18XX_WDT_DEF_TIMEOUT) ")"); + +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); +MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); + +struct lpc18xx_wdt_dev { + struct watchdog_device wdt_dev; + struct clk *reg_clk; + struct clk *wdt_clk; + unsigned long clk_rate; + void __iomem *base; + struct timer_list timer; + spinlock_t lock; +}; + +static int lpc18xx_wdt_feed(struct watchdog_device *wdt_dev) +{ + struct lpc18xx_wdt_dev *lpc18xx_wdt = watchdog_get_drvdata(wdt_dev); + unsigned long flags; + + /* + * An abort condition will occur if an interrupt happens during the feed + * sequence. + */ + spin_lock_irqsave(&lpc18xx_wdt->lock, flags); + writel(LPC18XX_WDT_FEED_MAGIC1, lpc18xx_wdt->base + LPC18XX_WDT_FEED); + writel(LPC18XX_WDT_FEED_MAGIC2, lpc18xx_wdt->base + LPC18XX_WDT_FEED); + spin_unlock_irqrestore(&lpc18xx_wdt->lock, flags); + + return 0; +} + +static void lpc18xx_wdt_timer_feed(struct timer_list *t) +{ + struct lpc18xx_wdt_dev *lpc18xx_wdt = from_timer(lpc18xx_wdt, t, timer); + struct watchdog_device *wdt_dev = &lpc18xx_wdt->wdt_dev; + + lpc18xx_wdt_feed(wdt_dev); + + /* Use safe value (1/2 of real timeout) */ + mod_timer(&lpc18xx_wdt->timer, jiffies + + msecs_to_jiffies((wdt_dev->timeout * MSEC_PER_SEC) / 2)); +} + +/* + * Since LPC18xx Watchdog cannot be disabled in hardware, we must keep feeding + * it with a timer until userspace watchdog software takes over. + */ +static int lpc18xx_wdt_stop(struct watchdog_device *wdt_dev) +{ + struct lpc18xx_wdt_dev *lpc18xx_wdt = watchdog_get_drvdata(wdt_dev); + + lpc18xx_wdt_timer_feed(&lpc18xx_wdt->timer); + + return 0; +} + +static void __lpc18xx_wdt_set_timeout(struct lpc18xx_wdt_dev *lpc18xx_wdt) +{ + unsigned int val; + + val = DIV_ROUND_UP(lpc18xx_wdt->wdt_dev.timeout * lpc18xx_wdt->clk_rate, + LPC18XX_WDT_CLK_DIV); + writel(val, lpc18xx_wdt->base + LPC18XX_WDT_TC); +} + +static int lpc18xx_wdt_set_timeout(struct watchdog_device *wdt_dev, + unsigned int new_timeout) +{ + struct lpc18xx_wdt_dev *lpc18xx_wdt = watchdog_get_drvdata(wdt_dev); + + lpc18xx_wdt->wdt_dev.timeout = new_timeout; + __lpc18xx_wdt_set_timeout(lpc18xx_wdt); + + return 0; +} + +static unsigned int lpc18xx_wdt_get_timeleft(struct watchdog_device *wdt_dev) +{ + struct lpc18xx_wdt_dev *lpc18xx_wdt = watchdog_get_drvdata(wdt_dev); + unsigned int val; + + val = readl(lpc18xx_wdt->base + LPC18XX_WDT_TV); + return (val * LPC18XX_WDT_CLK_DIV) / lpc18xx_wdt->clk_rate; +} + +static int lpc18xx_wdt_start(struct watchdog_device *wdt_dev) +{ + struct lpc18xx_wdt_dev *lpc18xx_wdt = watchdog_get_drvdata(wdt_dev); + unsigned int val; + + if (timer_pending(&lpc18xx_wdt->timer)) + del_timer(&lpc18xx_wdt->timer); + + val = readl(lpc18xx_wdt->base + LPC18XX_WDT_MOD); + val |= LPC18XX_WDT_MOD_WDEN; + val |= LPC18XX_WDT_MOD_WDRESET; + writel(val, lpc18xx_wdt->base + LPC18XX_WDT_MOD); + + /* + * Setting the WDEN bit in the WDMOD register is not sufficient to + * enable the Watchdog. A valid feed sequence must be completed after + * setting WDEN before the Watchdog is capable of generating a reset. + */ + lpc18xx_wdt_feed(wdt_dev); + + return 0; +} + +static int lpc18xx_wdt_restart(struct watchdog_device *wdt_dev, + unsigned long action, void *data) +{ + struct lpc18xx_wdt_dev *lpc18xx_wdt = watchdog_get_drvdata(wdt_dev); + unsigned long flags; + int val; + + /* + * Incorrect feed sequence causes immediate watchdog reset if enabled. + */ + spin_lock_irqsave(&lpc18xx_wdt->lock, flags); + + val = readl(lpc18xx_wdt->base + LPC18XX_WDT_MOD); + val |= LPC18XX_WDT_MOD_WDEN; + val |= LPC18XX_WDT_MOD_WDRESET; + writel(val, lpc18xx_wdt->base + LPC18XX_WDT_MOD); + + writel(LPC18XX_WDT_FEED_MAGIC1, lpc18xx_wdt->base + LPC18XX_WDT_FEED); + writel(LPC18XX_WDT_FEED_MAGIC2, lpc18xx_wdt->base + LPC18XX_WDT_FEED); + + writel(LPC18XX_WDT_FEED_MAGIC1, lpc18xx_wdt->base + LPC18XX_WDT_FEED); + writel(LPC18XX_WDT_FEED_MAGIC1, lpc18xx_wdt->base + LPC18XX_WDT_FEED); + + spin_unlock_irqrestore(&lpc18xx_wdt->lock, flags); + + return 0; +} + +static const struct watchdog_info lpc18xx_wdt_info = { + .identity = "NXP LPC18xx Watchdog", + .options = WDIOF_SETTIMEOUT | + WDIOF_KEEPALIVEPING | + WDIOF_MAGICCLOSE, +}; + +static const struct watchdog_ops lpc18xx_wdt_ops = { + .owner = THIS_MODULE, + .start = lpc18xx_wdt_start, + .stop = lpc18xx_wdt_stop, + .ping = lpc18xx_wdt_feed, + .set_timeout = lpc18xx_wdt_set_timeout, + .get_timeleft = lpc18xx_wdt_get_timeleft, + .restart = lpc18xx_wdt_restart, +}; + +static int lpc18xx_wdt_probe(struct platform_device *pdev) +{ + struct lpc18xx_wdt_dev *lpc18xx_wdt; + struct device *dev = &pdev->dev; + struct resource *res; + int ret; + + lpc18xx_wdt = devm_kzalloc(dev, sizeof(*lpc18xx_wdt), GFP_KERNEL); + if (!lpc18xx_wdt) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + lpc18xx_wdt->base = devm_ioremap_resource(dev, res); + if (IS_ERR(lpc18xx_wdt->base)) + return PTR_ERR(lpc18xx_wdt->base); + + lpc18xx_wdt->reg_clk = devm_clk_get(dev, "reg"); + if (IS_ERR(lpc18xx_wdt->reg_clk)) { + dev_err(dev, "failed to get the reg clock\n"); + return PTR_ERR(lpc18xx_wdt->reg_clk); + } + + lpc18xx_wdt->wdt_clk = devm_clk_get(dev, "wdtclk"); + if (IS_ERR(lpc18xx_wdt->wdt_clk)) { + dev_err(dev, "failed to get the wdt clock\n"); + return PTR_ERR(lpc18xx_wdt->wdt_clk); + } + + ret = clk_prepare_enable(lpc18xx_wdt->reg_clk); + if (ret) { + dev_err(dev, "could not prepare or enable sys clock\n"); + return ret; + } + + ret = clk_prepare_enable(lpc18xx_wdt->wdt_clk); + if (ret) { + dev_err(dev, "could not prepare or enable wdt clock\n"); + goto disable_reg_clk; + } + + /* We use the clock rate to calculate timeouts */ + lpc18xx_wdt->clk_rate = clk_get_rate(lpc18xx_wdt->wdt_clk); + if (lpc18xx_wdt->clk_rate == 0) { + dev_err(dev, "failed to get clock rate\n"); + ret = -EINVAL; + goto disable_wdt_clk; + } + + lpc18xx_wdt->wdt_dev.info = &lpc18xx_wdt_info; + lpc18xx_wdt->wdt_dev.ops = &lpc18xx_wdt_ops; + + lpc18xx_wdt->wdt_dev.min_timeout = DIV_ROUND_UP(LPC18XX_WDT_TC_MIN * + LPC18XX_WDT_CLK_DIV, lpc18xx_wdt->clk_rate); + + lpc18xx_wdt->wdt_dev.max_timeout = (LPC18XX_WDT_TC_MAX * + LPC18XX_WDT_CLK_DIV) / lpc18xx_wdt->clk_rate; + + lpc18xx_wdt->wdt_dev.timeout = min(lpc18xx_wdt->wdt_dev.max_timeout, + LPC18XX_WDT_DEF_TIMEOUT); + + spin_lock_init(&lpc18xx_wdt->lock); + + lpc18xx_wdt->wdt_dev.parent = dev; + watchdog_set_drvdata(&lpc18xx_wdt->wdt_dev, lpc18xx_wdt); + + watchdog_init_timeout(&lpc18xx_wdt->wdt_dev, heartbeat, dev); + + __lpc18xx_wdt_set_timeout(lpc18xx_wdt); + + timer_setup(&lpc18xx_wdt->timer, lpc18xx_wdt_timer_feed, 0); + + watchdog_set_nowayout(&lpc18xx_wdt->wdt_dev, nowayout); + watchdog_set_restart_priority(&lpc18xx_wdt->wdt_dev, 128); + + platform_set_drvdata(pdev, lpc18xx_wdt); + + ret = watchdog_register_device(&lpc18xx_wdt->wdt_dev); + if (ret) + goto disable_wdt_clk; + + return 0; + +disable_wdt_clk: + clk_disable_unprepare(lpc18xx_wdt->wdt_clk); +disable_reg_clk: + clk_disable_unprepare(lpc18xx_wdt->reg_clk); + return ret; +} + +static void lpc18xx_wdt_shutdown(struct platform_device *pdev) +{ + struct lpc18xx_wdt_dev *lpc18xx_wdt = platform_get_drvdata(pdev); + + lpc18xx_wdt_stop(&lpc18xx_wdt->wdt_dev); +} + +static int lpc18xx_wdt_remove(struct platform_device *pdev) +{ + struct lpc18xx_wdt_dev *lpc18xx_wdt = platform_get_drvdata(pdev); + + dev_warn(&pdev->dev, "I quit now, hardware will probably reboot!\n"); + del_timer_sync(&lpc18xx_wdt->timer); + + watchdog_unregister_device(&lpc18xx_wdt->wdt_dev); + clk_disable_unprepare(lpc18xx_wdt->wdt_clk); + clk_disable_unprepare(lpc18xx_wdt->reg_clk); + + return 0; +} + +static const struct of_device_id lpc18xx_wdt_match[] = { + { .compatible = "nxp,lpc1850-wwdt" }, + {} +}; +MODULE_DEVICE_TABLE(of, lpc18xx_wdt_match); + +static struct platform_driver lpc18xx_wdt_driver = { + .driver = { + .name = "lpc18xx-wdt", + .of_match_table = lpc18xx_wdt_match, + }, + .probe = lpc18xx_wdt_probe, + .remove = lpc18xx_wdt_remove, + .shutdown = lpc18xx_wdt_shutdown, +}; +module_platform_driver(lpc18xx_wdt_driver); + +MODULE_AUTHOR("Ariel D'Alessandro <ariel@vanguardiasur.com.ar>"); +MODULE_DESCRIPTION("NXP LPC18xx Watchdog Timer Driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/watchdog/m54xx_wdt.c b/drivers/watchdog/m54xx_wdt.c new file mode 100644 index 000000000..da6fa2b68 --- /dev/null +++ b/drivers/watchdog/m54xx_wdt.c @@ -0,0 +1,225 @@ +/* + * drivers/watchdog/m54xx_wdt.c + * + * Watchdog driver for ColdFire MCF547x & MCF548x processors + * Copyright 2010 (c) Philippe De Muyter <phdm@macqel.be> + * + * Adapted from the IXP4xx watchdog driver, which carries these notices: + * + * Author: Deepak Saxena <dsaxena@plexity.net> + * + * Copyright 2004 (c) MontaVista, Software, Inc. + * Based on sa1100 driver, Copyright (C) 2000 Oleg Drokin <green@crimea.edu> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/types.h> +#include <linux/kernel.h> +#include <linux/fs.h> +#include <linux/miscdevice.h> +#include <linux/watchdog.h> +#include <linux/init.h> +#include <linux/bitops.h> +#include <linux/ioport.h> +#include <linux/uaccess.h> + +#include <asm/coldfire.h> +#include <asm/m54xxsim.h> +#include <asm/m54xxgpt.h> + +static bool nowayout = WATCHDOG_NOWAYOUT; +static unsigned int heartbeat = 30; /* (secs) Default is 0.5 minute */ +static unsigned long wdt_status; + +#define WDT_IN_USE 0 +#define WDT_OK_TO_CLOSE 1 + +static void wdt_enable(void) +{ + unsigned int gms0; + + /* preserve GPIO usage, if any */ + gms0 = __raw_readl(MCF_GPT_GMS0); + if (gms0 & MCF_GPT_GMS_TMS_GPIO) + gms0 &= (MCF_GPT_GMS_TMS_GPIO | MCF_GPT_GMS_GPIO_MASK + | MCF_GPT_GMS_OD); + else + gms0 = MCF_GPT_GMS_TMS_GPIO | MCF_GPT_GMS_OD; + __raw_writel(gms0, MCF_GPT_GMS0); + __raw_writel(MCF_GPT_GCIR_PRE(heartbeat*(MCF_BUSCLK/0xffff)) | + MCF_GPT_GCIR_CNT(0xffff), MCF_GPT_GCIR0); + gms0 |= MCF_GPT_GMS_OCPW(0xA5) | MCF_GPT_GMS_WDEN | MCF_GPT_GMS_CE; + __raw_writel(gms0, MCF_GPT_GMS0); +} + +static void wdt_disable(void) +{ + unsigned int gms0; + + /* disable watchdog */ + gms0 = __raw_readl(MCF_GPT_GMS0); + gms0 &= ~(MCF_GPT_GMS_WDEN | MCF_GPT_GMS_CE); + __raw_writel(gms0, MCF_GPT_GMS0); +} + +static void wdt_keepalive(void) +{ + unsigned int gms0; + + gms0 = __raw_readl(MCF_GPT_GMS0); + gms0 |= MCF_GPT_GMS_OCPW(0xA5); + __raw_writel(gms0, MCF_GPT_GMS0); +} + +static int m54xx_wdt_open(struct inode *inode, struct file *file) +{ + if (test_and_set_bit(WDT_IN_USE, &wdt_status)) + return -EBUSY; + + clear_bit(WDT_OK_TO_CLOSE, &wdt_status); + wdt_enable(); + return nonseekable_open(inode, file); +} + +static ssize_t m54xx_wdt_write(struct file *file, const char *data, + size_t len, loff_t *ppos) +{ + if (len) { + if (!nowayout) { + size_t i; + + clear_bit(WDT_OK_TO_CLOSE, &wdt_status); + + for (i = 0; i != len; i++) { + char c; + + if (get_user(c, data + i)) + return -EFAULT; + if (c == 'V') + set_bit(WDT_OK_TO_CLOSE, &wdt_status); + } + } + wdt_keepalive(); + } + return len; +} + +static const struct watchdog_info ident = { + .options = WDIOF_MAGICCLOSE | WDIOF_SETTIMEOUT | + WDIOF_KEEPALIVEPING, + .identity = "Coldfire M54xx Watchdog", +}; + +static long m54xx_wdt_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) +{ + int ret = -ENOTTY; + int time; + + switch (cmd) { + case WDIOC_GETSUPPORT: + ret = copy_to_user((struct watchdog_info *)arg, &ident, + sizeof(ident)) ? -EFAULT : 0; + break; + + case WDIOC_GETSTATUS: + ret = put_user(0, (int *)arg); + break; + + case WDIOC_GETBOOTSTATUS: + ret = put_user(0, (int *)arg); + break; + + case WDIOC_KEEPALIVE: + wdt_keepalive(); + ret = 0; + break; + + case WDIOC_SETTIMEOUT: + ret = get_user(time, (int *)arg); + if (ret) + break; + + if (time <= 0 || time > 30) { + ret = -EINVAL; + break; + } + + heartbeat = time; + wdt_enable(); + /* Fall through */ + + case WDIOC_GETTIMEOUT: + ret = put_user(heartbeat, (int *)arg); + break; + } + return ret; +} + +static int m54xx_wdt_release(struct inode *inode, struct file *file) +{ + if (test_bit(WDT_OK_TO_CLOSE, &wdt_status)) + wdt_disable(); + else { + pr_crit("Device closed unexpectedly - timer will not stop\n"); + wdt_keepalive(); + } + clear_bit(WDT_IN_USE, &wdt_status); + clear_bit(WDT_OK_TO_CLOSE, &wdt_status); + + return 0; +} + + +static const struct file_operations m54xx_wdt_fops = { + .owner = THIS_MODULE, + .llseek = no_llseek, + .write = m54xx_wdt_write, + .unlocked_ioctl = m54xx_wdt_ioctl, + .open = m54xx_wdt_open, + .release = m54xx_wdt_release, +}; + +static struct miscdevice m54xx_wdt_miscdev = { + .minor = WATCHDOG_MINOR, + .name = "watchdog", + .fops = &m54xx_wdt_fops, +}; + +static int __init m54xx_wdt_init(void) +{ + if (!request_mem_region(MCF_GPT_GCIR0, 4, "Coldfire M54xx Watchdog")) { + pr_warn("I/O region busy\n"); + return -EBUSY; + } + pr_info("driver is loaded\n"); + + return misc_register(&m54xx_wdt_miscdev); +} + +static void __exit m54xx_wdt_exit(void) +{ + misc_deregister(&m54xx_wdt_miscdev); + release_mem_region(MCF_GPT_GCIR0, 4); +} + +module_init(m54xx_wdt_init); +module_exit(m54xx_wdt_exit); + +MODULE_AUTHOR("Philippe De Muyter <phdm@macqel.be>"); +MODULE_DESCRIPTION("Coldfire M54xx Watchdog"); + +module_param(heartbeat, int, 0); +MODULE_PARM_DESC(heartbeat, "Watchdog heartbeat in seconds (default 30s)"); + +module_param(nowayout, bool, 0); +MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started"); + +MODULE_LICENSE("GPL"); diff --git a/drivers/watchdog/machzwd.c b/drivers/watchdog/machzwd.c new file mode 100644 index 000000000..88d823d87 --- /dev/null +++ b/drivers/watchdog/machzwd.c @@ -0,0 +1,456 @@ +/* + * MachZ ZF-Logic Watchdog Timer driver for Linux + * + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * The author does NOT admit liability nor provide warranty for + * any of this software. This material is provided "AS-IS" in + * the hope that it may be useful for others. + * + * Author: Fernando Fuganti <fuganti@conectiva.com.br> + * + * Based on sbc60xxwdt.c by Jakob Oestergaard + * + * + * We have two timers (wd#1, wd#2) driven by a 32 KHz clock with the + * following periods: + * wd#1 - 2 seconds; + * wd#2 - 7.2 ms; + * After the expiration of wd#1, it can generate a NMI, SCI, SMI, or + * a system RESET and it starts wd#2 that unconditionally will RESET + * the system when the counter reaches zero. + * + * 14-Dec-2001 Matt Domsch <Matt_Domsch@dell.com> + * Added nowayout module option to override CONFIG_WATCHDOG_NOWAYOUT + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/types.h> +#include <linux/timer.h> +#include <linux/jiffies.h> +#include <linux/miscdevice.h> +#include <linux/watchdog.h> +#include <linux/fs.h> +#include <linux/ioport.h> +#include <linux/notifier.h> +#include <linux/reboot.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/uaccess.h> + + +/* ports */ +#define ZF_IOBASE 0x218 +#define INDEX 0x218 +#define DATA_B 0x219 +#define DATA_W 0x21A +#define DATA_D 0x21A + +/* indexes */ /* size */ +#define ZFL_VERSION 0x02 /* 16 */ +#define CONTROL 0x10 /* 16 */ +#define STATUS 0x12 /* 8 */ +#define COUNTER_1 0x0C /* 16 */ +#define COUNTER_2 0x0E /* 8 */ +#define PULSE_LEN 0x0F /* 8 */ + +/* controls */ +#define ENABLE_WD1 0x0001 +#define ENABLE_WD2 0x0002 +#define RESET_WD1 0x0010 +#define RESET_WD2 0x0020 +#define GEN_SCI 0x0100 +#define GEN_NMI 0x0200 +#define GEN_SMI 0x0400 +#define GEN_RESET 0x0800 + + +/* utilities */ + +#define WD1 0 +#define WD2 1 + +#define zf_writew(port, data) { outb(port, INDEX); outw(data, DATA_W); } +#define zf_writeb(port, data) { outb(port, INDEX); outb(data, DATA_B); } +#define zf_get_ZFL_version() zf_readw(ZFL_VERSION) + + +static unsigned short zf_readw(unsigned char port) +{ + outb(port, INDEX); + return inw(DATA_W); +} + + +MODULE_AUTHOR("Fernando Fuganti <fuganti@conectiva.com.br>"); +MODULE_DESCRIPTION("MachZ ZF-Logic Watchdog driver"); +MODULE_LICENSE("GPL"); + +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); +MODULE_PARM_DESC(nowayout, + "Watchdog cannot be stopped once started (default=" + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); + +#define PFX "machzwd" + +static const struct watchdog_info zf_info = { + .options = WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE, + .firmware_version = 1, + .identity = "ZF-Logic watchdog", +}; + + +/* + * action refers to action taken when watchdog resets + * 0 = GEN_RESET + * 1 = GEN_SMI + * 2 = GEN_NMI + * 3 = GEN_SCI + * defaults to GEN_RESET (0) + */ +static int action; +module_param(action, int, 0); +MODULE_PARM_DESC(action, "after watchdog resets, generate: " + "0 = RESET(*) 1 = SMI 2 = NMI 3 = SCI"); + +static void zf_ping(struct timer_list *unused); + +static int zf_action = GEN_RESET; +static unsigned long zf_is_open; +static char zf_expect_close; +static DEFINE_SPINLOCK(zf_port_lock); +static DEFINE_TIMER(zf_timer, zf_ping); +static unsigned long next_heartbeat; + + +/* timeout for user land heart beat (10 seconds) */ +#define ZF_USER_TIMEO (HZ*10) + +/* timeout for hardware watchdog (~500ms) */ +#define ZF_HW_TIMEO (HZ/2) + +/* number of ticks on WD#1 (driven by a 32KHz clock, 2s) */ +#define ZF_CTIMEOUT 0xffff + +#ifndef ZF_DEBUG +#define dprintk(format, args...) +#else +#define dprintk(format, args...) \ + pr_debug(":%s:%d: " format, __func__, __LINE__ , ## args) +#endif + + +static inline void zf_set_status(unsigned char new) +{ + zf_writeb(STATUS, new); +} + + +/* CONTROL register functions */ + +static inline unsigned short zf_get_control(void) +{ + return zf_readw(CONTROL); +} + +static inline void zf_set_control(unsigned short new) +{ + zf_writew(CONTROL, new); +} + + +/* WD#? counter functions */ +/* + * Just set counter value + */ + +static inline void zf_set_timer(unsigned short new, unsigned char n) +{ + switch (n) { + case WD1: + zf_writew(COUNTER_1, new); + case WD2: + zf_writeb(COUNTER_2, new > 0xff ? 0xff : new); + default: + return; + } +} + +/* + * stop hardware timer + */ +static void zf_timer_off(void) +{ + unsigned int ctrl_reg = 0; + unsigned long flags; + + /* stop internal ping */ + del_timer_sync(&zf_timer); + + spin_lock_irqsave(&zf_port_lock, flags); + /* stop watchdog timer */ + ctrl_reg = zf_get_control(); + ctrl_reg |= (ENABLE_WD1|ENABLE_WD2); /* disable wd1 and wd2 */ + ctrl_reg &= ~(ENABLE_WD1|ENABLE_WD2); + zf_set_control(ctrl_reg); + spin_unlock_irqrestore(&zf_port_lock, flags); + + pr_info("Watchdog timer is now disabled\n"); +} + + +/* + * start hardware timer + */ +static void zf_timer_on(void) +{ + unsigned int ctrl_reg = 0; + unsigned long flags; + + spin_lock_irqsave(&zf_port_lock, flags); + + zf_writeb(PULSE_LEN, 0xff); + + zf_set_timer(ZF_CTIMEOUT, WD1); + + /* user land ping */ + next_heartbeat = jiffies + ZF_USER_TIMEO; + + /* start the timer for internal ping */ + mod_timer(&zf_timer, jiffies + ZF_HW_TIMEO); + + /* start watchdog timer */ + ctrl_reg = zf_get_control(); + ctrl_reg |= (ENABLE_WD1|zf_action); + zf_set_control(ctrl_reg); + spin_unlock_irqrestore(&zf_port_lock, flags); + + pr_info("Watchdog timer is now enabled\n"); +} + + +static void zf_ping(struct timer_list *unused) +{ + unsigned int ctrl_reg = 0; + unsigned long flags; + + zf_writeb(COUNTER_2, 0xff); + + if (time_before(jiffies, next_heartbeat)) { + dprintk("time_before: %ld\n", next_heartbeat - jiffies); + /* + * reset event is activated by transition from 0 to 1 on + * RESET_WD1 bit and we assume that it is already zero... + */ + + spin_lock_irqsave(&zf_port_lock, flags); + ctrl_reg = zf_get_control(); + ctrl_reg |= RESET_WD1; + zf_set_control(ctrl_reg); + + /* ...and nothing changes until here */ + ctrl_reg &= ~(RESET_WD1); + zf_set_control(ctrl_reg); + spin_unlock_irqrestore(&zf_port_lock, flags); + + mod_timer(&zf_timer, jiffies + ZF_HW_TIMEO); + } else + pr_crit("I will reset your machine\n"); +} + +static ssize_t zf_write(struct file *file, const char __user *buf, size_t count, + loff_t *ppos) +{ + /* See if we got the magic character */ + if (count) { + /* + * no need to check for close confirmation + * no way to disable watchdog ;) + */ + if (!nowayout) { + size_t ofs; + /* + * note: just in case someone wrote the magic character + * five months ago... + */ + zf_expect_close = 0; + + /* now scan */ + for (ofs = 0; ofs != count; ofs++) { + char c; + if (get_user(c, buf + ofs)) + return -EFAULT; + if (c == 'V') { + zf_expect_close = 42; + dprintk("zf_expect_close = 42\n"); + } + } + } + + /* + * Well, anyhow someone wrote to us, + * we should return that favour + */ + next_heartbeat = jiffies + ZF_USER_TIMEO; + dprintk("user ping at %ld\n", jiffies); + } + return count; +} + +static long zf_ioctl(struct file *file, unsigned int cmd, unsigned long arg) +{ + void __user *argp = (void __user *)arg; + int __user *p = argp; + switch (cmd) { + case WDIOC_GETSUPPORT: + if (copy_to_user(argp, &zf_info, sizeof(zf_info))) + return -EFAULT; + break; + case WDIOC_GETSTATUS: + case WDIOC_GETBOOTSTATUS: + return put_user(0, p); + case WDIOC_KEEPALIVE: + zf_ping(0); + break; + default: + return -ENOTTY; + } + return 0; +} + +static int zf_open(struct inode *inode, struct file *file) +{ + if (test_and_set_bit(0, &zf_is_open)) + return -EBUSY; + if (nowayout) + __module_get(THIS_MODULE); + zf_timer_on(); + return nonseekable_open(inode, file); +} + +static int zf_close(struct inode *inode, struct file *file) +{ + if (zf_expect_close == 42) + zf_timer_off(); + else { + del_timer(&zf_timer); + pr_err("device file closed unexpectedly. Will not stop the WDT!\n"); + } + clear_bit(0, &zf_is_open); + zf_expect_close = 0; + return 0; +} + +/* + * Notifier for system down + */ + +static int zf_notify_sys(struct notifier_block *this, unsigned long code, + void *unused) +{ + if (code == SYS_DOWN || code == SYS_HALT) + zf_timer_off(); + return NOTIFY_DONE; +} + +static const struct file_operations zf_fops = { + .owner = THIS_MODULE, + .llseek = no_llseek, + .write = zf_write, + .unlocked_ioctl = zf_ioctl, + .open = zf_open, + .release = zf_close, +}; + +static struct miscdevice zf_miscdev = { + .minor = WATCHDOG_MINOR, + .name = "watchdog", + .fops = &zf_fops, +}; + + +/* + * The device needs to learn about soft shutdowns in order to + * turn the timebomb registers off. + */ +static struct notifier_block zf_notifier = { + .notifier_call = zf_notify_sys, +}; + +static void __init zf_show_action(int act) +{ + static const char * const str[] = { "RESET", "SMI", "NMI", "SCI" }; + + pr_info("Watchdog using action = %s\n", str[act]); +} + +static int __init zf_init(void) +{ + int ret; + + pr_info("MachZ ZF-Logic Watchdog driver initializing\n"); + + ret = zf_get_ZFL_version(); + if (!ret || ret == 0xffff) { + pr_warn("no ZF-Logic found\n"); + return -ENODEV; + } + + if (action <= 3 && action >= 0) + zf_action = zf_action >> action; + else + action = 0; + + zf_show_action(action); + + if (!request_region(ZF_IOBASE, 3, "MachZ ZFL WDT")) { + pr_err("cannot reserve I/O ports at %d\n", ZF_IOBASE); + ret = -EBUSY; + goto no_region; + } + + ret = register_reboot_notifier(&zf_notifier); + if (ret) { + pr_err("can't register reboot notifier (err=%d)\n", ret); + goto no_reboot; + } + + ret = misc_register(&zf_miscdev); + if (ret) { + pr_err("can't misc_register on minor=%d\n", WATCHDOG_MINOR); + goto no_misc; + } + + zf_set_status(0); + zf_set_control(0); + + return 0; + +no_misc: + unregister_reboot_notifier(&zf_notifier); +no_reboot: + release_region(ZF_IOBASE, 3); +no_region: + return ret; +} + + +static void __exit zf_exit(void) +{ + zf_timer_off(); + + misc_deregister(&zf_miscdev); + unregister_reboot_notifier(&zf_notifier); + release_region(ZF_IOBASE, 3); +} + +module_init(zf_init); +module_exit(zf_exit); diff --git a/drivers/watchdog/max63xx_wdt.c b/drivers/watchdog/max63xx_wdt.c new file mode 100644 index 000000000..bf6a06824 --- /dev/null +++ b/drivers/watchdog/max63xx_wdt.c @@ -0,0 +1,296 @@ +/* + * drivers/char/watchdog/max63xx_wdt.c + * + * Driver for max63{69,70,71,72,73,74} watchdog timers + * + * Copyright (C) 2009 Marc Zyngier <maz@misterjones.org> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + * + * This driver assumes the watchdog pins are memory mapped (as it is + * the case for the Arcom Zeus). Should it be connected over GPIOs or + * another interface, some abstraction will have to be introduced. + */ + +#include <linux/err.h> +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/mod_devicetable.h> +#include <linux/types.h> +#include <linux/kernel.h> +#include <linux/watchdog.h> +#include <linux/bitops.h> +#include <linux/platform_device.h> +#include <linux/spinlock.h> +#include <linux/io.h> +#include <linux/slab.h> + +#define DEFAULT_HEARTBEAT 60 +#define MAX_HEARTBEAT 60 + +static unsigned int heartbeat = DEFAULT_HEARTBEAT; +static bool nowayout = WATCHDOG_NOWAYOUT; + +/* + * Memory mapping: a single byte, 3 first lower bits to select bit 3 + * to ping the watchdog. + */ +#define MAX6369_WDSET (7 << 0) +#define MAX6369_WDI (1 << 3) + +#define MAX6369_WDSET_DISABLED 3 + +static int nodelay; + +struct max63xx_wdt { + struct watchdog_device wdd; + const struct max63xx_timeout *timeout; + + /* memory mapping */ + void __iomem *base; + spinlock_t lock; + + /* WDI and WSET bits write access routines */ + void (*ping)(struct max63xx_wdt *wdt); + void (*set)(struct max63xx_wdt *wdt, u8 set); +}; + +/* + * The timeout values used are actually the absolute minimum the chip + * offers. Typical values on my board are slightly over twice as long + * (10s setting ends up with a 25s timeout), and can be up to 3 times + * the nominal setting (according to the datasheet). So please take + * these values with a grain of salt. Same goes for the initial delay + * "feature". Only max6373/74 have a few settings without this initial + * delay (selected with the "nodelay" parameter). + * + * I also decided to remove from the tables any timeout smaller than a + * second, as it looked completly overkill... + */ + +/* Timeouts in second */ +struct max63xx_timeout { + const u8 wdset; + const u8 tdelay; + const u8 twd; +}; + +static const struct max63xx_timeout max6369_table[] = { + { 5, 1, 1 }, + { 6, 10, 10 }, + { 7, 60, 60 }, + { }, +}; + +static const struct max63xx_timeout max6371_table[] = { + { 6, 60, 3 }, + { 7, 60, 60 }, + { }, +}; + +static const struct max63xx_timeout max6373_table[] = { + { 2, 60, 1 }, + { 5, 0, 1 }, + { 1, 3, 3 }, + { 7, 60, 10 }, + { 6, 0, 10 }, + { }, +}; + +static struct max63xx_timeout * +max63xx_select_timeout(struct max63xx_timeout *table, int value) +{ + while (table->twd) { + if (value <= table->twd) { + if (nodelay && table->tdelay == 0) + return table; + + if (!nodelay) + return table; + } + + table++; + } + + return NULL; +} + +static int max63xx_wdt_ping(struct watchdog_device *wdd) +{ + struct max63xx_wdt *wdt = watchdog_get_drvdata(wdd); + + wdt->ping(wdt); + return 0; +} + +static int max63xx_wdt_start(struct watchdog_device *wdd) +{ + struct max63xx_wdt *wdt = watchdog_get_drvdata(wdd); + + wdt->set(wdt, wdt->timeout->wdset); + + /* check for a edge triggered startup */ + if (wdt->timeout->tdelay == 0) + wdt->ping(wdt); + return 0; +} + +static int max63xx_wdt_stop(struct watchdog_device *wdd) +{ + struct max63xx_wdt *wdt = watchdog_get_drvdata(wdd); + + wdt->set(wdt, MAX6369_WDSET_DISABLED); + return 0; +} + +static const struct watchdog_ops max63xx_wdt_ops = { + .owner = THIS_MODULE, + .start = max63xx_wdt_start, + .stop = max63xx_wdt_stop, + .ping = max63xx_wdt_ping, +}; + +static const struct watchdog_info max63xx_wdt_info = { + .options = WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE, + .identity = "max63xx Watchdog", +}; + +static void max63xx_mmap_ping(struct max63xx_wdt *wdt) +{ + u8 val; + + spin_lock(&wdt->lock); + + val = __raw_readb(wdt->base); + + __raw_writeb(val | MAX6369_WDI, wdt->base); + __raw_writeb(val & ~MAX6369_WDI, wdt->base); + + spin_unlock(&wdt->lock); +} + +static void max63xx_mmap_set(struct max63xx_wdt *wdt, u8 set) +{ + u8 val; + + spin_lock(&wdt->lock); + + val = __raw_readb(wdt->base); + val &= ~MAX6369_WDSET; + val |= set & MAX6369_WDSET; + __raw_writeb(val, wdt->base); + + spin_unlock(&wdt->lock); +} + +static int max63xx_mmap_init(struct platform_device *p, struct max63xx_wdt *wdt) +{ + struct resource *mem = platform_get_resource(p, IORESOURCE_MEM, 0); + + wdt->base = devm_ioremap_resource(&p->dev, mem); + if (IS_ERR(wdt->base)) + return PTR_ERR(wdt->base); + + spin_lock_init(&wdt->lock); + + wdt->ping = max63xx_mmap_ping; + wdt->set = max63xx_mmap_set; + return 0; +} + +static int max63xx_wdt_probe(struct platform_device *pdev) +{ + struct max63xx_wdt *wdt; + struct max63xx_timeout *table; + int err; + + wdt = devm_kzalloc(&pdev->dev, sizeof(*wdt), GFP_KERNEL); + if (!wdt) + return -ENOMEM; + + table = (struct max63xx_timeout *)pdev->id_entry->driver_data; + + if (heartbeat < 1 || heartbeat > MAX_HEARTBEAT) + heartbeat = DEFAULT_HEARTBEAT; + + wdt->timeout = max63xx_select_timeout(table, heartbeat); + if (!wdt->timeout) { + dev_err(&pdev->dev, "unable to satisfy %ds heartbeat request\n", + heartbeat); + return -EINVAL; + } + + err = max63xx_mmap_init(pdev, wdt); + if (err) + return err; + + platform_set_drvdata(pdev, &wdt->wdd); + watchdog_set_drvdata(&wdt->wdd, wdt); + + wdt->wdd.parent = &pdev->dev; + wdt->wdd.timeout = wdt->timeout->twd; + wdt->wdd.info = &max63xx_wdt_info; + wdt->wdd.ops = &max63xx_wdt_ops; + + watchdog_set_nowayout(&wdt->wdd, nowayout); + + err = watchdog_register_device(&wdt->wdd); + if (err) + return err; + + dev_info(&pdev->dev, "using %ds heartbeat with %ds initial delay\n", + wdt->timeout->twd, wdt->timeout->tdelay); + return 0; +} + +static int max63xx_wdt_remove(struct platform_device *pdev) +{ + struct watchdog_device *wdd = platform_get_drvdata(pdev); + + watchdog_unregister_device(wdd); + return 0; +} + +static const struct platform_device_id max63xx_id_table[] = { + { "max6369_wdt", (kernel_ulong_t)max6369_table, }, + { "max6370_wdt", (kernel_ulong_t)max6369_table, }, + { "max6371_wdt", (kernel_ulong_t)max6371_table, }, + { "max6372_wdt", (kernel_ulong_t)max6371_table, }, + { "max6373_wdt", (kernel_ulong_t)max6373_table, }, + { "max6374_wdt", (kernel_ulong_t)max6373_table, }, + { }, +}; +MODULE_DEVICE_TABLE(platform, max63xx_id_table); + +static struct platform_driver max63xx_wdt_driver = { + .probe = max63xx_wdt_probe, + .remove = max63xx_wdt_remove, + .id_table = max63xx_id_table, + .driver = { + .name = "max63xx_wdt", + }, +}; + +module_platform_driver(max63xx_wdt_driver); + +MODULE_AUTHOR("Marc Zyngier <maz@misterjones.org>"); +MODULE_DESCRIPTION("max63xx Watchdog Driver"); + +module_param(heartbeat, int, 0); +MODULE_PARM_DESC(heartbeat, + "Watchdog heartbeat period in seconds from 1 to " + __MODULE_STRING(MAX_HEARTBEAT) ", default " + __MODULE_STRING(DEFAULT_HEARTBEAT)); + +module_param(nowayout, bool, 0); +MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); + +module_param(nodelay, int, 0); +MODULE_PARM_DESC(nodelay, + "Force selection of a timeout setting without initial delay " + "(max6373/74 only, default=0)"); + +MODULE_LICENSE("GPL v2"); diff --git a/drivers/watchdog/max77620_wdt.c b/drivers/watchdog/max77620_wdt.c new file mode 100644 index 000000000..70c9cd3ba --- /dev/null +++ b/drivers/watchdog/max77620_wdt.c @@ -0,0 +1,229 @@ +/* + * Maxim MAX77620 Watchdog Driver + * + * Copyright (C) 2016 NVIDIA CORPORATION. All rights reserved. + * + * Author: Laxman Dewangan <ldewangan@nvidia.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/err.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/mod_devicetable.h> +#include <linux/mfd/max77620.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> +#include <linux/slab.h> +#include <linux/watchdog.h> + +static bool nowayout = WATCHDOG_NOWAYOUT; + +struct max77620_wdt { + struct device *dev; + struct regmap *rmap; + struct watchdog_device wdt_dev; +}; + +static int max77620_wdt_start(struct watchdog_device *wdt_dev) +{ + struct max77620_wdt *wdt = watchdog_get_drvdata(wdt_dev); + + return regmap_update_bits(wdt->rmap, MAX77620_REG_CNFGGLBL2, + MAX77620_WDTEN, MAX77620_WDTEN); +} + +static int max77620_wdt_stop(struct watchdog_device *wdt_dev) +{ + struct max77620_wdt *wdt = watchdog_get_drvdata(wdt_dev); + + return regmap_update_bits(wdt->rmap, MAX77620_REG_CNFGGLBL2, + MAX77620_WDTEN, 0); +} + +static int max77620_wdt_ping(struct watchdog_device *wdt_dev) +{ + struct max77620_wdt *wdt = watchdog_get_drvdata(wdt_dev); + + return regmap_update_bits(wdt->rmap, MAX77620_REG_CNFGGLBL3, + MAX77620_WDTC_MASK, 0x1); +} + +static int max77620_wdt_set_timeout(struct watchdog_device *wdt_dev, + unsigned int timeout) +{ + struct max77620_wdt *wdt = watchdog_get_drvdata(wdt_dev); + unsigned int wdt_timeout; + u8 regval; + int ret; + + switch (timeout) { + case 0 ... 2: + regval = MAX77620_TWD_2s; + wdt_timeout = 2; + break; + + case 3 ... 16: + regval = MAX77620_TWD_16s; + wdt_timeout = 16; + break; + + case 17 ... 64: + regval = MAX77620_TWD_64s; + wdt_timeout = 64; + break; + + default: + regval = MAX77620_TWD_128s; + wdt_timeout = 128; + break; + } + + ret = regmap_update_bits(wdt->rmap, MAX77620_REG_CNFGGLBL3, + MAX77620_WDTC_MASK, 0x1); + if (ret < 0) + return ret; + + ret = regmap_update_bits(wdt->rmap, MAX77620_REG_CNFGGLBL2, + MAX77620_TWD_MASK, regval); + if (ret < 0) + return ret; + + wdt_dev->timeout = wdt_timeout; + + return 0; +} + +static const struct watchdog_info max77620_wdt_info = { + .identity = "max77620-watchdog", + .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE, +}; + +static const struct watchdog_ops max77620_wdt_ops = { + .start = max77620_wdt_start, + .stop = max77620_wdt_stop, + .ping = max77620_wdt_ping, + .set_timeout = max77620_wdt_set_timeout, +}; + +static int max77620_wdt_probe(struct platform_device *pdev) +{ + struct max77620_wdt *wdt; + struct watchdog_device *wdt_dev; + unsigned int regval; + int ret; + + wdt = devm_kzalloc(&pdev->dev, sizeof(*wdt), GFP_KERNEL); + if (!wdt) + return -ENOMEM; + + wdt->dev = &pdev->dev; + wdt->rmap = dev_get_regmap(pdev->dev.parent, NULL); + if (!wdt->rmap) { + dev_err(wdt->dev, "Failed to get parent regmap\n"); + return -ENODEV; + } + + wdt_dev = &wdt->wdt_dev; + wdt_dev->info = &max77620_wdt_info; + wdt_dev->ops = &max77620_wdt_ops; + wdt_dev->min_timeout = 2; + wdt_dev->max_timeout = 128; + wdt_dev->max_hw_heartbeat_ms = 128 * 1000; + + platform_set_drvdata(pdev, wdt); + + /* Enable WD_RST_WK - WDT expire results in a restart */ + ret = regmap_update_bits(wdt->rmap, MAX77620_REG_ONOFFCNFG2, + MAX77620_ONOFFCNFG2_WD_RST_WK, + MAX77620_ONOFFCNFG2_WD_RST_WK); + if (ret < 0) { + dev_err(wdt->dev, "Failed to set WD_RST_WK: %d\n", ret); + return ret; + } + + /* Set WDT clear in OFF and sleep mode */ + ret = regmap_update_bits(wdt->rmap, MAX77620_REG_CNFGGLBL2, + MAX77620_WDTOFFC | MAX77620_WDTSLPC, + MAX77620_WDTOFFC | MAX77620_WDTSLPC); + if (ret < 0) { + dev_err(wdt->dev, "Failed to set WDT OFF mode: %d\n", ret); + return ret; + } + + /* Check if WDT running and if yes then set flags properly */ + ret = regmap_read(wdt->rmap, MAX77620_REG_CNFGGLBL2, ®val); + if (ret < 0) { + dev_err(wdt->dev, "Failed to read WDT CFG register: %d\n", ret); + return ret; + } + + switch (regval & MAX77620_TWD_MASK) { + case MAX77620_TWD_2s: + wdt_dev->timeout = 2; + break; + case MAX77620_TWD_16s: + wdt_dev->timeout = 16; + break; + case MAX77620_TWD_64s: + wdt_dev->timeout = 64; + break; + default: + wdt_dev->timeout = 128; + break; + } + + if (regval & MAX77620_WDTEN) + set_bit(WDOG_HW_RUNNING, &wdt_dev->status); + + watchdog_set_nowayout(wdt_dev, nowayout); + watchdog_set_drvdata(wdt_dev, wdt); + + ret = watchdog_register_device(wdt_dev); + if (ret < 0) { + dev_err(&pdev->dev, "watchdog registration failed: %d\n", ret); + return ret; + } + + return 0; +} + +static int max77620_wdt_remove(struct platform_device *pdev) +{ + struct max77620_wdt *wdt = platform_get_drvdata(pdev); + + max77620_wdt_stop(&wdt->wdt_dev); + watchdog_unregister_device(&wdt->wdt_dev); + + return 0; +} + +static const struct platform_device_id max77620_wdt_devtype[] = { + { .name = "max77620-watchdog", }, + { }, +}; +MODULE_DEVICE_TABLE(platform, max77620_wdt_devtype); + +static struct platform_driver max77620_wdt_driver = { + .driver = { + .name = "max77620-watchdog", + }, + .probe = max77620_wdt_probe, + .remove = max77620_wdt_remove, + .id_table = max77620_wdt_devtype, +}; + +module_platform_driver(max77620_wdt_driver); + +MODULE_DESCRIPTION("Max77620 watchdog timer driver"); + +module_param(nowayout, bool, 0); +MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started " + "(default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); + +MODULE_AUTHOR("Laxman Dewangan <ldewangan@nvidia.com>"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/watchdog/mei_wdt.c b/drivers/watchdog/mei_wdt.c new file mode 100644 index 000000000..c862dd38b --- /dev/null +++ b/drivers/watchdog/mei_wdt.c @@ -0,0 +1,684 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Intel Management Engine Interface (Intel MEI) Linux driver + * Copyright (c) 2015, Intel Corporation. + */ + +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/interrupt.h> +#include <linux/debugfs.h> +#include <linux/completion.h> +#include <linux/watchdog.h> + +#include <linux/uuid.h> +#include <linux/mei_cl_bus.h> + +/* + * iAMT Watchdog Device + */ +#define INTEL_AMT_WATCHDOG_ID "iamt_wdt" + +#define MEI_WDT_DEFAULT_TIMEOUT 120 /* seconds */ +#define MEI_WDT_MIN_TIMEOUT 120 /* seconds */ +#define MEI_WDT_MAX_TIMEOUT 65535 /* seconds */ + +/* Commands */ +#define MEI_MANAGEMENT_CONTROL 0x02 + +/* MEI Management Control version number */ +#define MEI_MC_VERSION_NUMBER 0x10 + +/* Sub Commands */ +#define MEI_MC_START_WD_TIMER_REQ 0x13 +#define MEI_MC_START_WD_TIMER_RES 0x83 +#define MEI_WDT_STATUS_SUCCESS 0 +#define MEI_WDT_WDSTATE_NOT_REQUIRED 0x1 +#define MEI_MC_STOP_WD_TIMER_REQ 0x14 + +/** + * enum mei_wdt_state - internal watchdog state + * + * @MEI_WDT_PROBE: wd in probing stage + * @MEI_WDT_IDLE: wd is idle and not opened + * @MEI_WDT_START: wd was opened, start was called + * @MEI_WDT_RUNNING: wd is expecting keep alive pings + * @MEI_WDT_STOPPING: wd is stopping and will move to IDLE + * @MEI_WDT_NOT_REQUIRED: wd device is not required + */ +enum mei_wdt_state { + MEI_WDT_PROBE, + MEI_WDT_IDLE, + MEI_WDT_START, + MEI_WDT_RUNNING, + MEI_WDT_STOPPING, + MEI_WDT_NOT_REQUIRED, +}; + +static const char *mei_wdt_state_str(enum mei_wdt_state state) +{ + switch (state) { + case MEI_WDT_PROBE: + return "PROBE"; + case MEI_WDT_IDLE: + return "IDLE"; + case MEI_WDT_START: + return "START"; + case MEI_WDT_RUNNING: + return "RUNNING"; + case MEI_WDT_STOPPING: + return "STOPPING"; + case MEI_WDT_NOT_REQUIRED: + return "NOT_REQUIRED"; + default: + return "unknown"; + } +} + +/** + * struct mei_wdt - mei watchdog driver + * @wdd: watchdog device + * + * @cldev: mei watchdog client device + * @state: watchdog internal state + * @resp_required: ping required response + * @response: ping response completion + * @unregister: unregister worker + * @reg_lock: watchdog device registration lock + * @timeout: watchdog current timeout + * + * @dbgfs_dir: debugfs dir entry + */ +struct mei_wdt { + struct watchdog_device wdd; + + struct mei_cl_device *cldev; + enum mei_wdt_state state; + bool resp_required; + struct completion response; + struct work_struct unregister; + struct mutex reg_lock; + u16 timeout; + +#if IS_ENABLED(CONFIG_DEBUG_FS) + struct dentry *dbgfs_dir; +#endif /* CONFIG_DEBUG_FS */ +}; + +/* + * struct mei_mc_hdr - Management Control Command Header + * + * @command: Management Control (0x2) + * @bytecount: Number of bytes in the message beyond this byte + * @subcommand: Management Control Subcommand + * @versionnumber: Management Control Version (0x10) + */ +struct mei_mc_hdr { + u8 command; + u8 bytecount; + u8 subcommand; + u8 versionnumber; +}; + +/** + * struct mei_wdt_start_request watchdog start/ping + * + * @hdr: Management Control Command Header + * @timeout: timeout value + * @reserved: reserved (legacy) + */ +struct mei_wdt_start_request { + struct mei_mc_hdr hdr; + u16 timeout; + u8 reserved[17]; +} __packed; + +/** + * struct mei_wdt_start_response watchdog start/ping response + * + * @hdr: Management Control Command Header + * @status: operation status + * @wdstate: watchdog status bit mask + */ +struct mei_wdt_start_response { + struct mei_mc_hdr hdr; + u8 status; + u8 wdstate; +} __packed; + +/** + * struct mei_wdt_stop_request - watchdog stop + * + * @hdr: Management Control Command Header + */ +struct mei_wdt_stop_request { + struct mei_mc_hdr hdr; +} __packed; + +/** + * mei_wdt_ping - send wd start/ping command + * + * @wdt: mei watchdog device + * + * Return: 0 on success, + * negative errno code on failure + */ +static int mei_wdt_ping(struct mei_wdt *wdt) +{ + struct mei_wdt_start_request req; + const size_t req_len = sizeof(req); + int ret; + + memset(&req, 0, req_len); + req.hdr.command = MEI_MANAGEMENT_CONTROL; + req.hdr.bytecount = req_len - offsetof(struct mei_mc_hdr, subcommand); + req.hdr.subcommand = MEI_MC_START_WD_TIMER_REQ; + req.hdr.versionnumber = MEI_MC_VERSION_NUMBER; + req.timeout = wdt->timeout; + + ret = mei_cldev_send(wdt->cldev, (u8 *)&req, req_len); + if (ret < 0) + return ret; + + return 0; +} + +/** + * mei_wdt_stop - send wd stop command + * + * @wdt: mei watchdog device + * + * Return: 0 on success, + * negative errno code on failure + */ +static int mei_wdt_stop(struct mei_wdt *wdt) +{ + struct mei_wdt_stop_request req; + const size_t req_len = sizeof(req); + int ret; + + memset(&req, 0, req_len); + req.hdr.command = MEI_MANAGEMENT_CONTROL; + req.hdr.bytecount = req_len - offsetof(struct mei_mc_hdr, subcommand); + req.hdr.subcommand = MEI_MC_STOP_WD_TIMER_REQ; + req.hdr.versionnumber = MEI_MC_VERSION_NUMBER; + + ret = mei_cldev_send(wdt->cldev, (u8 *)&req, req_len); + if (ret < 0) + return ret; + + return 0; +} + +/** + * mei_wdt_ops_start - wd start command from the watchdog core. + * + * @wdd: watchdog device + * + * Return: 0 on success or -ENODEV; + */ +static int mei_wdt_ops_start(struct watchdog_device *wdd) +{ + struct mei_wdt *wdt = watchdog_get_drvdata(wdd); + + wdt->state = MEI_WDT_START; + wdd->timeout = wdt->timeout; + return 0; +} + +/** + * mei_wdt_ops_stop - wd stop command from the watchdog core. + * + * @wdd: watchdog device + * + * Return: 0 if success, negative errno code for failure + */ +static int mei_wdt_ops_stop(struct watchdog_device *wdd) +{ + struct mei_wdt *wdt = watchdog_get_drvdata(wdd); + int ret; + + if (wdt->state != MEI_WDT_RUNNING) + return 0; + + wdt->state = MEI_WDT_STOPPING; + + ret = mei_wdt_stop(wdt); + if (ret) + return ret; + + wdt->state = MEI_WDT_IDLE; + + return 0; +} + +/** + * mei_wdt_ops_ping - wd ping command from the watchdog core. + * + * @wdd: watchdog device + * + * Return: 0 if success, negative errno code on failure + */ +static int mei_wdt_ops_ping(struct watchdog_device *wdd) +{ + struct mei_wdt *wdt = watchdog_get_drvdata(wdd); + int ret; + + if (wdt->state != MEI_WDT_START && wdt->state != MEI_WDT_RUNNING) + return 0; + + if (wdt->resp_required) + init_completion(&wdt->response); + + wdt->state = MEI_WDT_RUNNING; + ret = mei_wdt_ping(wdt); + if (ret) + return ret; + + if (wdt->resp_required) + ret = wait_for_completion_killable(&wdt->response); + + return ret; +} + +/** + * mei_wdt_ops_set_timeout - wd set timeout command from the watchdog core. + * + * @wdd: watchdog device + * @timeout: timeout value to set + * + * Return: 0 if success, negative errno code for failure + */ +static int mei_wdt_ops_set_timeout(struct watchdog_device *wdd, + unsigned int timeout) +{ + + struct mei_wdt *wdt = watchdog_get_drvdata(wdd); + + /* valid value is already checked by the caller */ + wdt->timeout = timeout; + wdd->timeout = timeout; + + return 0; +} + +static const struct watchdog_ops wd_ops = { + .owner = THIS_MODULE, + .start = mei_wdt_ops_start, + .stop = mei_wdt_ops_stop, + .ping = mei_wdt_ops_ping, + .set_timeout = mei_wdt_ops_set_timeout, +}; + +/* not const as the firmware_version field need to be retrieved */ +static struct watchdog_info wd_info = { + .identity = INTEL_AMT_WATCHDOG_ID, + .options = WDIOF_KEEPALIVEPING | + WDIOF_SETTIMEOUT | + WDIOF_ALARMONLY, +}; + +/** + * __mei_wdt_is_registered - check if wdt is registered + * + * @wdt: mei watchdog device + * + * Return: true if the wdt is registered with the watchdog subsystem + * Locking: should be called under wdt->reg_lock + */ +static inline bool __mei_wdt_is_registered(struct mei_wdt *wdt) +{ + return !!watchdog_get_drvdata(&wdt->wdd); +} + +/** + * mei_wdt_unregister - unregister from the watchdog subsystem + * + * @wdt: mei watchdog device + */ +static void mei_wdt_unregister(struct mei_wdt *wdt) +{ + mutex_lock(&wdt->reg_lock); + + if (__mei_wdt_is_registered(wdt)) { + watchdog_unregister_device(&wdt->wdd); + watchdog_set_drvdata(&wdt->wdd, NULL); + memset(&wdt->wdd, 0, sizeof(wdt->wdd)); + } + + mutex_unlock(&wdt->reg_lock); +} + +/** + * mei_wdt_register - register with the watchdog subsystem + * + * @wdt: mei watchdog device + * + * Return: 0 if success, negative errno code for failure + */ +static int mei_wdt_register(struct mei_wdt *wdt) +{ + struct device *dev; + int ret; + + if (!wdt || !wdt->cldev) + return -EINVAL; + + dev = &wdt->cldev->dev; + + mutex_lock(&wdt->reg_lock); + + if (__mei_wdt_is_registered(wdt)) { + ret = 0; + goto out; + } + + wdt->wdd.info = &wd_info; + wdt->wdd.ops = &wd_ops; + wdt->wdd.parent = dev; + wdt->wdd.timeout = MEI_WDT_DEFAULT_TIMEOUT; + wdt->wdd.min_timeout = MEI_WDT_MIN_TIMEOUT; + wdt->wdd.max_timeout = MEI_WDT_MAX_TIMEOUT; + + watchdog_set_drvdata(&wdt->wdd, wdt); + watchdog_stop_on_reboot(&wdt->wdd); + watchdog_stop_on_unregister(&wdt->wdd); + + ret = watchdog_register_device(&wdt->wdd); + if (ret) { + dev_err(dev, "unable to register watchdog device = %d.\n", ret); + watchdog_set_drvdata(&wdt->wdd, NULL); + } + + wdt->state = MEI_WDT_IDLE; + +out: + mutex_unlock(&wdt->reg_lock); + return ret; +} + +static void mei_wdt_unregister_work(struct work_struct *work) +{ + struct mei_wdt *wdt = container_of(work, struct mei_wdt, unregister); + + mei_wdt_unregister(wdt); +} + +/** + * mei_wdt_rx - callback for data receive + * + * @cldev: bus device + */ +static void mei_wdt_rx(struct mei_cl_device *cldev) +{ + struct mei_wdt *wdt = mei_cldev_get_drvdata(cldev); + struct mei_wdt_start_response res; + const size_t res_len = sizeof(res); + int ret; + + ret = mei_cldev_recv(wdt->cldev, (u8 *)&res, res_len); + if (ret < 0) { + dev_err(&cldev->dev, "failure in recv %d\n", ret); + return; + } + + /* Empty response can be sent on stop */ + if (ret == 0) + return; + + if (ret < sizeof(struct mei_mc_hdr)) { + dev_err(&cldev->dev, "recv small data %d\n", ret); + return; + } + + if (res.hdr.command != MEI_MANAGEMENT_CONTROL || + res.hdr.versionnumber != MEI_MC_VERSION_NUMBER) { + dev_err(&cldev->dev, "wrong command received\n"); + return; + } + + if (res.hdr.subcommand != MEI_MC_START_WD_TIMER_RES) { + dev_warn(&cldev->dev, "unsupported command %d :%s[%d]\n", + res.hdr.subcommand, + mei_wdt_state_str(wdt->state), + wdt->state); + return; + } + + /* Run the unregistration in a worker as this can be + * run only after ping completion, otherwise the flow will + * deadlock on watchdog core mutex. + */ + if (wdt->state == MEI_WDT_RUNNING) { + if (res.wdstate & MEI_WDT_WDSTATE_NOT_REQUIRED) { + wdt->state = MEI_WDT_NOT_REQUIRED; + schedule_work(&wdt->unregister); + } + goto out; + } + + if (wdt->state == MEI_WDT_PROBE) { + if (res.wdstate & MEI_WDT_WDSTATE_NOT_REQUIRED) { + wdt->state = MEI_WDT_NOT_REQUIRED; + } else { + /* stop the watchdog and register watchdog device */ + mei_wdt_stop(wdt); + mei_wdt_register(wdt); + } + return; + } + + dev_warn(&cldev->dev, "not in correct state %s[%d]\n", + mei_wdt_state_str(wdt->state), wdt->state); + +out: + if (!completion_done(&wdt->response)) + complete(&wdt->response); +} + +/* + * mei_wdt_notif - callback for event notification + * + * @cldev: bus device + */ +static void mei_wdt_notif(struct mei_cl_device *cldev) +{ + struct mei_wdt *wdt = mei_cldev_get_drvdata(cldev); + + if (wdt->state != MEI_WDT_NOT_REQUIRED) + return; + + mei_wdt_register(wdt); +} + +#if IS_ENABLED(CONFIG_DEBUG_FS) + +static ssize_t mei_dbgfs_read_activation(struct file *file, char __user *ubuf, + size_t cnt, loff_t *ppos) +{ + struct mei_wdt *wdt = file->private_data; + const size_t bufsz = 32; + char buf[32]; + ssize_t pos; + + mutex_lock(&wdt->reg_lock); + pos = scnprintf(buf, bufsz, "%s\n", + __mei_wdt_is_registered(wdt) ? "activated" : "deactivated"); + mutex_unlock(&wdt->reg_lock); + + return simple_read_from_buffer(ubuf, cnt, ppos, buf, pos); +} + +static const struct file_operations dbgfs_fops_activation = { + .open = simple_open, + .read = mei_dbgfs_read_activation, + .llseek = generic_file_llseek, +}; + +static ssize_t mei_dbgfs_read_state(struct file *file, char __user *ubuf, + size_t cnt, loff_t *ppos) +{ + struct mei_wdt *wdt = file->private_data; + char buf[32]; + ssize_t pos; + + pos = scnprintf(buf, sizeof(buf), "state: %s\n", + mei_wdt_state_str(wdt->state)); + + return simple_read_from_buffer(ubuf, cnt, ppos, buf, pos); +} + +static const struct file_operations dbgfs_fops_state = { + .open = simple_open, + .read = mei_dbgfs_read_state, + .llseek = generic_file_llseek, +}; + +static void dbgfs_unregister(struct mei_wdt *wdt) +{ + debugfs_remove_recursive(wdt->dbgfs_dir); + wdt->dbgfs_dir = NULL; +} + +static int dbgfs_register(struct mei_wdt *wdt) +{ + struct dentry *dir, *f; + + dir = debugfs_create_dir(KBUILD_MODNAME, NULL); + if (!dir) + return -ENOMEM; + + wdt->dbgfs_dir = dir; + f = debugfs_create_file("state", S_IRUSR, dir, wdt, &dbgfs_fops_state); + if (!f) + goto err; + + f = debugfs_create_file("activation", S_IRUSR, + dir, wdt, &dbgfs_fops_activation); + if (!f) + goto err; + + return 0; +err: + dbgfs_unregister(wdt); + return -ENODEV; +} + +#else + +static inline void dbgfs_unregister(struct mei_wdt *wdt) {} + +static inline int dbgfs_register(struct mei_wdt *wdt) +{ + return 0; +} +#endif /* CONFIG_DEBUG_FS */ + +static int mei_wdt_probe(struct mei_cl_device *cldev, + const struct mei_cl_device_id *id) +{ + struct mei_wdt *wdt; + int ret; + + wdt = kzalloc(sizeof(struct mei_wdt), GFP_KERNEL); + if (!wdt) + return -ENOMEM; + + wdt->timeout = MEI_WDT_DEFAULT_TIMEOUT; + wdt->state = MEI_WDT_PROBE; + wdt->cldev = cldev; + wdt->resp_required = mei_cldev_ver(cldev) > 0x1; + mutex_init(&wdt->reg_lock); + init_completion(&wdt->response); + INIT_WORK(&wdt->unregister, mei_wdt_unregister_work); + + mei_cldev_set_drvdata(cldev, wdt); + + ret = mei_cldev_enable(cldev); + if (ret < 0) { + dev_err(&cldev->dev, "Could not enable cl device\n"); + goto err_out; + } + + ret = mei_cldev_register_rx_cb(wdt->cldev, mei_wdt_rx); + if (ret) { + dev_err(&cldev->dev, "Could not reg rx event ret=%d\n", ret); + goto err_disable; + } + + ret = mei_cldev_register_notif_cb(wdt->cldev, mei_wdt_notif); + /* on legacy devices notification is not supported + */ + if (ret && ret != -EOPNOTSUPP) { + dev_err(&cldev->dev, "Could not reg notif event ret=%d\n", ret); + goto err_disable; + } + + wd_info.firmware_version = mei_cldev_ver(cldev); + + if (wdt->resp_required) + ret = mei_wdt_ping(wdt); + else + ret = mei_wdt_register(wdt); + + if (ret) + goto err_disable; + + if (dbgfs_register(wdt)) + dev_warn(&cldev->dev, "cannot register debugfs\n"); + + return 0; + +err_disable: + mei_cldev_disable(cldev); + +err_out: + kfree(wdt); + + return ret; +} + +static int mei_wdt_remove(struct mei_cl_device *cldev) +{ + struct mei_wdt *wdt = mei_cldev_get_drvdata(cldev); + + /* Free the caller in case of fw initiated or unexpected reset */ + if (!completion_done(&wdt->response)) + complete(&wdt->response); + + cancel_work_sync(&wdt->unregister); + + mei_wdt_unregister(wdt); + + mei_cldev_disable(cldev); + + dbgfs_unregister(wdt); + + kfree(wdt); + + return 0; +} + +#define MEI_UUID_WD UUID_LE(0x05B79A6F, 0x4628, 0x4D7F, \ + 0x89, 0x9D, 0xA9, 0x15, 0x14, 0xCB, 0x32, 0xAB) + +static const struct mei_cl_device_id mei_wdt_tbl[] = { + { .uuid = MEI_UUID_WD, .version = MEI_CL_VERSION_ANY }, + /* required last entry */ + { } +}; +MODULE_DEVICE_TABLE(mei, mei_wdt_tbl); + +static struct mei_cl_driver mei_wdt_driver = { + .id_table = mei_wdt_tbl, + .name = KBUILD_MODNAME, + + .probe = mei_wdt_probe, + .remove = mei_wdt_remove, +}; + +module_mei_cl_driver(mei_wdt_driver); + +MODULE_AUTHOR("Intel Corporation"); +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("Device driver for Intel MEI iAMT watchdog"); diff --git a/drivers/watchdog/mena21_wdt.c b/drivers/watchdog/mena21_wdt.c new file mode 100644 index 000000000..0be7f50e8 --- /dev/null +++ b/drivers/watchdog/mena21_wdt.c @@ -0,0 +1,233 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Watchdog driver for the A21 VME CPU Boards + * + * Copyright (C) 2013 MEN Mikro Elektronik Nuernberg GmbH + * + */ +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/types.h> +#include <linux/kernel.h> +#include <linux/slab.h> +#include <linux/platform_device.h> +#include <linux/watchdog.h> +#include <linux/uaccess.h> +#include <linux/gpio.h> +#include <linux/of_gpio.h> +#include <linux/delay.h> +#include <linux/bitops.h> + +#define NUM_GPIOS 6 + +enum a21_wdt_gpios { + GPIO_WD_ENAB, + GPIO_WD_FAST, + GPIO_WD_TRIG, + GPIO_WD_RST0, + GPIO_WD_RST1, + GPIO_WD_RST2, +}; + +struct a21_wdt_drv { + struct watchdog_device wdt; + unsigned gpios[NUM_GPIOS]; +}; + +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); +MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); + +static unsigned int a21_wdt_get_bootstatus(struct a21_wdt_drv *drv) +{ + int reset = 0; + + reset |= gpio_get_value(drv->gpios[GPIO_WD_RST0]) ? (1 << 0) : 0; + reset |= gpio_get_value(drv->gpios[GPIO_WD_RST1]) ? (1 << 1) : 0; + reset |= gpio_get_value(drv->gpios[GPIO_WD_RST2]) ? (1 << 2) : 0; + + return reset; +} + +static int a21_wdt_start(struct watchdog_device *wdt) +{ + struct a21_wdt_drv *drv = watchdog_get_drvdata(wdt); + + gpio_set_value(drv->gpios[GPIO_WD_ENAB], 1); + + return 0; +} + +static int a21_wdt_stop(struct watchdog_device *wdt) +{ + struct a21_wdt_drv *drv = watchdog_get_drvdata(wdt); + + gpio_set_value(drv->gpios[GPIO_WD_ENAB], 0); + + return 0; +} + +static int a21_wdt_ping(struct watchdog_device *wdt) +{ + struct a21_wdt_drv *drv = watchdog_get_drvdata(wdt); + + gpio_set_value(drv->gpios[GPIO_WD_TRIG], 0); + ndelay(10); + gpio_set_value(drv->gpios[GPIO_WD_TRIG], 1); + + return 0; +} + +static int a21_wdt_set_timeout(struct watchdog_device *wdt, + unsigned int timeout) +{ + struct a21_wdt_drv *drv = watchdog_get_drvdata(wdt); + + if (timeout != 1 && timeout != 30) { + dev_err(wdt->parent, "Only 1 and 30 allowed as timeout\n"); + return -EINVAL; + } + + if (timeout == 30 && wdt->timeout == 1) { + dev_err(wdt->parent, + "Transition from fast to slow mode not allowed\n"); + return -EINVAL; + } + + if (timeout == 1) + gpio_set_value(drv->gpios[GPIO_WD_FAST], 1); + else + gpio_set_value(drv->gpios[GPIO_WD_FAST], 0); + + wdt->timeout = timeout; + + return 0; +} + +static const struct watchdog_info a21_wdt_info = { + .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE, + .identity = "MEN A21 Watchdog", +}; + +static const struct watchdog_ops a21_wdt_ops = { + .owner = THIS_MODULE, + .start = a21_wdt_start, + .stop = a21_wdt_stop, + .ping = a21_wdt_ping, + .set_timeout = a21_wdt_set_timeout, +}; + +static struct watchdog_device a21_wdt = { + .info = &a21_wdt_info, + .ops = &a21_wdt_ops, + .min_timeout = 1, + .max_timeout = 30, +}; + +static int a21_wdt_probe(struct platform_device *pdev) +{ + struct device_node *node; + struct a21_wdt_drv *drv; + unsigned int reset = 0; + int num_gpios; + int ret; + int i; + + drv = devm_kzalloc(&pdev->dev, sizeof(struct a21_wdt_drv), GFP_KERNEL); + if (!drv) + return -ENOMEM; + + /* Fill GPIO pin array */ + node = pdev->dev.of_node; + + num_gpios = of_gpio_count(node); + if (num_gpios != NUM_GPIOS) { + dev_err(&pdev->dev, "gpios DT property wrong, got %d want %d", + num_gpios, NUM_GPIOS); + return -ENODEV; + } + + for (i = 0; i < num_gpios; i++) { + int val; + + val = of_get_gpio(node, i); + if (val < 0) + return val; + + drv->gpios[i] = val; + } + + /* Request the used GPIOs */ + for (i = 0; i < num_gpios; i++) { + ret = devm_gpio_request(&pdev->dev, drv->gpios[i], + "MEN A21 Watchdog"); + if (ret) + return ret; + + if (i < GPIO_WD_RST0) + ret = gpio_direction_output(drv->gpios[i], + gpio_get_value(drv->gpios[i])); + else /* GPIO_WD_RST[0..2] are inputs */ + ret = gpio_direction_input(drv->gpios[i]); + if (ret) + return ret; + } + + watchdog_init_timeout(&a21_wdt, 30, &pdev->dev); + watchdog_set_nowayout(&a21_wdt, nowayout); + watchdog_set_drvdata(&a21_wdt, drv); + a21_wdt.parent = &pdev->dev; + + reset = a21_wdt_get_bootstatus(drv); + if (reset == 2) + a21_wdt.bootstatus |= WDIOF_EXTERN1; + else if (reset == 4) + a21_wdt.bootstatus |= WDIOF_CARDRESET; + else if (reset == 5) + a21_wdt.bootstatus |= WDIOF_POWERUNDER; + else if (reset == 7) + a21_wdt.bootstatus |= WDIOF_EXTERN2; + + drv->wdt = a21_wdt; + dev_set_drvdata(&pdev->dev, drv); + + ret = devm_watchdog_register_device(&pdev->dev, &a21_wdt); + if (ret) { + dev_err(&pdev->dev, "Cannot register watchdog device\n"); + return ret; + } + + dev_info(&pdev->dev, "MEN A21 watchdog timer driver enabled\n"); + + return 0; +} + +static void a21_wdt_shutdown(struct platform_device *pdev) +{ + struct a21_wdt_drv *drv = dev_get_drvdata(&pdev->dev); + + gpio_set_value(drv->gpios[GPIO_WD_ENAB], 0); +} + +static const struct of_device_id a21_wdt_ids[] = { + { .compatible = "men,a021-wdt" }, + { }, +}; +MODULE_DEVICE_TABLE(of, a21_wdt_ids); + +static struct platform_driver a21_wdt_driver = { + .probe = a21_wdt_probe, + .shutdown = a21_wdt_shutdown, + .driver = { + .name = "a21-watchdog", + .of_match_table = a21_wdt_ids, + }, +}; + +module_platform_driver(a21_wdt_driver); + +MODULE_AUTHOR("MEN Mikro Elektronik"); +MODULE_DESCRIPTION("MEN A21 Watchdog"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:a21-watchdog"); diff --git a/drivers/watchdog/menf21bmc_wdt.c b/drivers/watchdog/menf21bmc_wdt.c new file mode 100644 index 000000000..3aefddebb --- /dev/null +++ b/drivers/watchdog/menf21bmc_wdt.c @@ -0,0 +1,203 @@ +/* + * MEN 14F021P00 Board Management Controller (BMC) Watchdog Driver. + * + * Copyright (C) 2014 MEN Mikro Elektronik Nuernberg GmbH + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/kernel.h> +#include <linux/device.h> +#include <linux/module.h> +#include <linux/watchdog.h> +#include <linux/platform_device.h> +#include <linux/i2c.h> + +#define DEVNAME "menf21bmc_wdt" + +#define BMC_CMD_WD_ON 0x11 +#define BMC_CMD_WD_OFF 0x12 +#define BMC_CMD_WD_TRIG 0x13 +#define BMC_CMD_WD_TIME 0x14 +#define BMC_CMD_WD_STATE 0x17 +#define BMC_WD_OFF_VAL 0x69 +#define BMC_CMD_RST_RSN 0x92 + +#define BMC_WD_TIMEOUT_MIN 1 /* in sec */ +#define BMC_WD_TIMEOUT_MAX 6553 /* in sec */ + +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); +MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); + +struct menf21bmc_wdt { + struct watchdog_device wdt; + struct i2c_client *i2c_client; +}; + +static int menf21bmc_wdt_set_bootstatus(struct menf21bmc_wdt *data) +{ + int rst_rsn; + + rst_rsn = i2c_smbus_read_byte_data(data->i2c_client, BMC_CMD_RST_RSN); + if (rst_rsn < 0) + return rst_rsn; + + if (rst_rsn == 0x02) + data->wdt.bootstatus |= WDIOF_CARDRESET; + else if (rst_rsn == 0x05) + data->wdt.bootstatus |= WDIOF_EXTERN1; + else if (rst_rsn == 0x06) + data->wdt.bootstatus |= WDIOF_EXTERN2; + else if (rst_rsn == 0x0A) + data->wdt.bootstatus |= WDIOF_POWERUNDER; + + return 0; +} + +static int menf21bmc_wdt_start(struct watchdog_device *wdt) +{ + struct menf21bmc_wdt *drv_data = watchdog_get_drvdata(wdt); + + return i2c_smbus_write_byte(drv_data->i2c_client, BMC_CMD_WD_ON); +} + +static int menf21bmc_wdt_stop(struct watchdog_device *wdt) +{ + struct menf21bmc_wdt *drv_data = watchdog_get_drvdata(wdt); + + return i2c_smbus_write_byte_data(drv_data->i2c_client, + BMC_CMD_WD_OFF, BMC_WD_OFF_VAL); +} + +static int +menf21bmc_wdt_settimeout(struct watchdog_device *wdt, unsigned int timeout) +{ + int ret; + struct menf21bmc_wdt *drv_data = watchdog_get_drvdata(wdt); + + /* + * BMC Watchdog does have a resolution of 100ms. + * Watchdog API defines the timeout in seconds, so we have to + * multiply the value. + */ + ret = i2c_smbus_write_word_data(drv_data->i2c_client, + BMC_CMD_WD_TIME, timeout * 10); + if (ret < 0) + return ret; + + wdt->timeout = timeout; + + return 0; +} + +static int menf21bmc_wdt_ping(struct watchdog_device *wdt) +{ + struct menf21bmc_wdt *drv_data = watchdog_get_drvdata(wdt); + + return i2c_smbus_write_byte(drv_data->i2c_client, BMC_CMD_WD_TRIG); +} + +static const struct watchdog_info menf21bmc_wdt_info = { + .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING, + .identity = DEVNAME, +}; + +static const struct watchdog_ops menf21bmc_wdt_ops = { + .owner = THIS_MODULE, + .start = menf21bmc_wdt_start, + .stop = menf21bmc_wdt_stop, + .ping = menf21bmc_wdt_ping, + .set_timeout = menf21bmc_wdt_settimeout, +}; + +static int menf21bmc_wdt_probe(struct platform_device *pdev) +{ + int ret, bmc_timeout; + struct menf21bmc_wdt *drv_data; + struct i2c_client *i2c_client = to_i2c_client(pdev->dev.parent); + + drv_data = devm_kzalloc(&pdev->dev, + sizeof(struct menf21bmc_wdt), GFP_KERNEL); + if (!drv_data) + return -ENOMEM; + + drv_data->wdt.ops = &menf21bmc_wdt_ops; + drv_data->wdt.info = &menf21bmc_wdt_info; + drv_data->wdt.min_timeout = BMC_WD_TIMEOUT_MIN; + drv_data->wdt.max_timeout = BMC_WD_TIMEOUT_MAX; + drv_data->wdt.parent = &pdev->dev; + drv_data->i2c_client = i2c_client; + + /* + * Get the current wdt timeout value from the BMC because + * the BMC will save the value set before if the system restarts. + */ + bmc_timeout = i2c_smbus_read_word_data(drv_data->i2c_client, + BMC_CMD_WD_TIME); + if (bmc_timeout < 0) { + dev_err(&pdev->dev, "failed to get current WDT timeout\n"); + return bmc_timeout; + } + + watchdog_init_timeout(&drv_data->wdt, bmc_timeout / 10, &pdev->dev); + watchdog_set_nowayout(&drv_data->wdt, nowayout); + watchdog_set_drvdata(&drv_data->wdt, drv_data); + platform_set_drvdata(pdev, drv_data); + + ret = menf21bmc_wdt_set_bootstatus(drv_data); + if (ret < 0) { + dev_err(&pdev->dev, "failed to set Watchdog bootstatus\n"); + return ret; + } + + ret = watchdog_register_device(&drv_data->wdt); + if (ret) { + dev_err(&pdev->dev, "failed to register Watchdog device\n"); + return ret; + } + + dev_info(&pdev->dev, "MEN 14F021P00 BMC Watchdog device enabled\n"); + + return 0; +} + +static int menf21bmc_wdt_remove(struct platform_device *pdev) +{ + struct menf21bmc_wdt *drv_data = platform_get_drvdata(pdev); + + dev_warn(&pdev->dev, + "Unregister MEN 14F021P00 BMC Watchdog device, board may reset\n"); + + watchdog_unregister_device(&drv_data->wdt); + + return 0; +} + +static void menf21bmc_wdt_shutdown(struct platform_device *pdev) +{ + struct menf21bmc_wdt *drv_data = platform_get_drvdata(pdev); + + i2c_smbus_write_word_data(drv_data->i2c_client, + BMC_CMD_WD_OFF, BMC_WD_OFF_VAL); +} + +static struct platform_driver menf21bmc_wdt = { + .driver = { + .name = DEVNAME, + }, + .probe = menf21bmc_wdt_probe, + .remove = menf21bmc_wdt_remove, + .shutdown = menf21bmc_wdt_shutdown, +}; + +module_platform_driver(menf21bmc_wdt); + +MODULE_DESCRIPTION("MEN 14F021P00 BMC Watchdog driver"); +MODULE_AUTHOR("Andreas Werner <andreas.werner@men.de>"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:menf21bmc_wdt"); diff --git a/drivers/watchdog/menz69_wdt.c b/drivers/watchdog/menz69_wdt.c new file mode 100644 index 000000000..ed18238c5 --- /dev/null +++ b/drivers/watchdog/menz69_wdt.c @@ -0,0 +1,170 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Watchdog driver for the MEN z069 IP-Core + * + * Copyright (C) 2018 Johannes Thumshirn <jth@kernel.org> + */ +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/mcb.h> +#include <linux/module.h> +#include <linux/watchdog.h> + +struct men_z069_drv { + struct watchdog_device wdt; + void __iomem *base; + struct resource *mem; +}; + +#define MEN_Z069_WTR 0x10 +#define MEN_Z069_WTR_WDEN BIT(15) +#define MEN_Z069_WTR_WDET_MASK 0x7fff +#define MEN_Z069_WVR 0x14 + +#define MEN_Z069_TIMER_FREQ 500 /* 500 Hz */ +#define MEN_Z069_WDT_COUNTER_MIN 1 +#define MEN_Z069_WDT_COUNTER_MAX 0x7fff +#define MEN_Z069_DEFAULT_TIMEOUT 30 + +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); +MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); + +static int men_z069_wdt_start(struct watchdog_device *wdt) +{ + struct men_z069_drv *drv = watchdog_get_drvdata(wdt); + u16 val; + + val = readw(drv->base + MEN_Z069_WTR); + val |= MEN_Z069_WTR_WDEN; + writew(val, drv->base + MEN_Z069_WTR); + + return 0; +} + +static int men_z069_wdt_stop(struct watchdog_device *wdt) +{ + struct men_z069_drv *drv = watchdog_get_drvdata(wdt); + u16 val; + + val = readw(drv->base + MEN_Z069_WTR); + val &= ~MEN_Z069_WTR_WDEN; + writew(val, drv->base + MEN_Z069_WTR); + + return 0; +} + +static int men_z069_wdt_ping(struct watchdog_device *wdt) +{ + struct men_z069_drv *drv = watchdog_get_drvdata(wdt); + u16 val; + + /* The watchdog trigger value toggles between 0x5555 and 0xaaaa */ + val = readw(drv->base + MEN_Z069_WVR); + val ^= 0xffff; + writew(val, drv->base + MEN_Z069_WVR); + + return 0; +} + +static int men_z069_wdt_set_timeout(struct watchdog_device *wdt, + unsigned int timeout) +{ + struct men_z069_drv *drv = watchdog_get_drvdata(wdt); + u16 reg, val, ena; + + wdt->timeout = timeout; + val = timeout * MEN_Z069_TIMER_FREQ; + + reg = readw(drv->base + MEN_Z069_WVR); + ena = reg & MEN_Z069_WTR_WDEN; + reg = ena | val; + writew(reg, drv->base + MEN_Z069_WTR); + + return 0; +} + +static const struct watchdog_info men_z069_info = { + .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE, + .identity = "MEN z069 Watchdog", +}; + +static const struct watchdog_ops men_z069_ops = { + .owner = THIS_MODULE, + .start = men_z069_wdt_start, + .stop = men_z069_wdt_stop, + .ping = men_z069_wdt_ping, + .set_timeout = men_z069_wdt_set_timeout, +}; + +static struct watchdog_device men_z069_wdt = { + .info = &men_z069_info, + .ops = &men_z069_ops, + .timeout = MEN_Z069_DEFAULT_TIMEOUT, + .min_timeout = 1, + .max_timeout = MEN_Z069_WDT_COUNTER_MAX / MEN_Z069_TIMER_FREQ, +}; + +static int men_z069_probe(struct mcb_device *dev, + const struct mcb_device_id *id) +{ + struct men_z069_drv *drv; + struct resource *mem; + + drv = devm_kzalloc(&dev->dev, sizeof(struct men_z069_drv), GFP_KERNEL); + if (!drv) + return -ENOMEM; + + mem = mcb_request_mem(dev, "z069-wdt"); + if (IS_ERR(mem)) + return PTR_ERR(mem); + + drv->base = devm_ioremap(&dev->dev, mem->start, resource_size(mem)); + if (drv->base == NULL) + goto release_mem; + + drv->mem = mem; + + drv->wdt = men_z069_wdt; + watchdog_init_timeout(&drv->wdt, 0, &dev->dev); + watchdog_set_nowayout(&drv->wdt, nowayout); + watchdog_set_drvdata(&drv->wdt, drv); + drv->wdt.parent = &dev->dev; + mcb_set_drvdata(dev, drv); + + return watchdog_register_device(&men_z069_wdt); + +release_mem: + mcb_release_mem(mem); + return -ENOMEM; +} + +static void men_z069_remove(struct mcb_device *dev) +{ + struct men_z069_drv *drv = mcb_get_drvdata(dev); + + watchdog_unregister_device(&drv->wdt); + mcb_release_mem(drv->mem); +} + +static const struct mcb_device_id men_z069_ids[] = { + { .device = 0x45 }, + { } +}; +MODULE_DEVICE_TABLE(mcb, men_z069_ids); + +static struct mcb_driver men_z069_driver = { + .driver = { + .name = "z069-wdt", + .owner = THIS_MODULE, + }, + .probe = men_z069_probe, + .remove = men_z069_remove, + .id_table = men_z069_ids, +}; +module_mcb_driver(men_z069_driver); + +MODULE_AUTHOR("Johannes Thumshirn <jth@kernel.org>"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("mcb:16z069"); diff --git a/drivers/watchdog/meson_gxbb_wdt.c b/drivers/watchdog/meson_gxbb_wdt.c new file mode 100644 index 000000000..0a6672789 --- /dev/null +++ b/drivers/watchdog/meson_gxbb_wdt.c @@ -0,0 +1,223 @@ +// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause +/* + * Copyright (c) 2016 BayLibre, SAS. + * Author: Neil Armstrong <narmstrong@baylibre.com> + * + */ +#include <linux/clk.h> +#include <linux/err.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/slab.h> +#include <linux/types.h> +#include <linux/watchdog.h> + +#define DEFAULT_TIMEOUT 30 /* seconds */ + +#define GXBB_WDT_CTRL_REG 0x0 +#define GXBB_WDT_TCNT_REG 0x8 +#define GXBB_WDT_RSET_REG 0xc + +#define GXBB_WDT_CTRL_CLKDIV_EN BIT(25) +#define GXBB_WDT_CTRL_CLK_EN BIT(24) +#define GXBB_WDT_CTRL_EE_RESET BIT(21) +#define GXBB_WDT_CTRL_EN BIT(18) +#define GXBB_WDT_CTRL_DIV_MASK (BIT(18) - 1) + +#define GXBB_WDT_TCNT_SETUP_MASK (BIT(16) - 1) +#define GXBB_WDT_TCNT_CNT_SHIFT 16 + +struct meson_gxbb_wdt { + void __iomem *reg_base; + struct watchdog_device wdt_dev; + struct clk *clk; +}; + +static int meson_gxbb_wdt_start(struct watchdog_device *wdt_dev) +{ + struct meson_gxbb_wdt *data = watchdog_get_drvdata(wdt_dev); + + writel(readl(data->reg_base + GXBB_WDT_CTRL_REG) | GXBB_WDT_CTRL_EN, + data->reg_base + GXBB_WDT_CTRL_REG); + + return 0; +} + +static int meson_gxbb_wdt_stop(struct watchdog_device *wdt_dev) +{ + struct meson_gxbb_wdt *data = watchdog_get_drvdata(wdt_dev); + + writel(readl(data->reg_base + GXBB_WDT_CTRL_REG) & ~GXBB_WDT_CTRL_EN, + data->reg_base + GXBB_WDT_CTRL_REG); + + return 0; +} + +static int meson_gxbb_wdt_ping(struct watchdog_device *wdt_dev) +{ + struct meson_gxbb_wdt *data = watchdog_get_drvdata(wdt_dev); + + writel(0, data->reg_base + GXBB_WDT_RSET_REG); + + return 0; +} + +static int meson_gxbb_wdt_set_timeout(struct watchdog_device *wdt_dev, + unsigned int timeout) +{ + struct meson_gxbb_wdt *data = watchdog_get_drvdata(wdt_dev); + unsigned long tcnt = timeout * 1000; + + if (tcnt > GXBB_WDT_TCNT_SETUP_MASK) + tcnt = GXBB_WDT_TCNT_SETUP_MASK; + + wdt_dev->timeout = timeout; + + meson_gxbb_wdt_ping(wdt_dev); + + writel(tcnt, data->reg_base + GXBB_WDT_TCNT_REG); + + return 0; +} + +static unsigned int meson_gxbb_wdt_get_timeleft(struct watchdog_device *wdt_dev) +{ + struct meson_gxbb_wdt *data = watchdog_get_drvdata(wdt_dev); + unsigned long reg; + + reg = readl(data->reg_base + GXBB_WDT_TCNT_REG); + + return ((reg & GXBB_WDT_TCNT_SETUP_MASK) - + (reg >> GXBB_WDT_TCNT_CNT_SHIFT)) / 1000; +} + +static const struct watchdog_ops meson_gxbb_wdt_ops = { + .start = meson_gxbb_wdt_start, + .stop = meson_gxbb_wdt_stop, + .ping = meson_gxbb_wdt_ping, + .set_timeout = meson_gxbb_wdt_set_timeout, + .get_timeleft = meson_gxbb_wdt_get_timeleft, +}; + +static const struct watchdog_info meson_gxbb_wdt_info = { + .identity = "Meson GXBB Watchdog", + .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE, +}; + +static int __maybe_unused meson_gxbb_wdt_resume(struct device *dev) +{ + struct meson_gxbb_wdt *data = dev_get_drvdata(dev); + + if (watchdog_active(&data->wdt_dev)) + meson_gxbb_wdt_start(&data->wdt_dev); + + return 0; +} + +static int __maybe_unused meson_gxbb_wdt_suspend(struct device *dev) +{ + struct meson_gxbb_wdt *data = dev_get_drvdata(dev); + + if (watchdog_active(&data->wdt_dev)) + meson_gxbb_wdt_stop(&data->wdt_dev); + + return 0; +} + +static const struct dev_pm_ops meson_gxbb_wdt_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(meson_gxbb_wdt_suspend, meson_gxbb_wdt_resume) +}; + +static const struct of_device_id meson_gxbb_wdt_dt_ids[] = { + { .compatible = "amlogic,meson-gxbb-wdt", }, + { /* sentinel */ }, +}; +MODULE_DEVICE_TABLE(of, meson_gxbb_wdt_dt_ids); + +static int meson_gxbb_wdt_probe(struct platform_device *pdev) +{ + struct meson_gxbb_wdt *data; + struct resource *res; + int ret; + + data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + data->reg_base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(data->reg_base)) + return PTR_ERR(data->reg_base); + + data->clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(data->clk)) + return PTR_ERR(data->clk); + + ret = clk_prepare_enable(data->clk); + if (ret) + return ret; + + platform_set_drvdata(pdev, data); + + data->wdt_dev.parent = &pdev->dev; + data->wdt_dev.info = &meson_gxbb_wdt_info; + data->wdt_dev.ops = &meson_gxbb_wdt_ops; + data->wdt_dev.max_hw_heartbeat_ms = GXBB_WDT_TCNT_SETUP_MASK; + data->wdt_dev.min_timeout = 1; + data->wdt_dev.timeout = DEFAULT_TIMEOUT; + watchdog_set_drvdata(&data->wdt_dev, data); + + /* Setup with 1ms timebase */ + writel(((clk_get_rate(data->clk) / 1000) & GXBB_WDT_CTRL_DIV_MASK) | + GXBB_WDT_CTRL_EE_RESET | + GXBB_WDT_CTRL_CLK_EN | + GXBB_WDT_CTRL_CLKDIV_EN, + data->reg_base + GXBB_WDT_CTRL_REG); + + meson_gxbb_wdt_set_timeout(&data->wdt_dev, data->wdt_dev.timeout); + + ret = watchdog_register_device(&data->wdt_dev); + if (ret) { + clk_disable_unprepare(data->clk); + return ret; + } + + return 0; +} + +static int meson_gxbb_wdt_remove(struct platform_device *pdev) +{ + struct meson_gxbb_wdt *data = platform_get_drvdata(pdev); + + watchdog_unregister_device(&data->wdt_dev); + + clk_disable_unprepare(data->clk); + + return 0; +} + +static void meson_gxbb_wdt_shutdown(struct platform_device *pdev) +{ + struct meson_gxbb_wdt *data = platform_get_drvdata(pdev); + + meson_gxbb_wdt_stop(&data->wdt_dev); +} + +static struct platform_driver meson_gxbb_wdt_driver = { + .probe = meson_gxbb_wdt_probe, + .remove = meson_gxbb_wdt_remove, + .shutdown = meson_gxbb_wdt_shutdown, + .driver = { + .name = "meson-gxbb-wdt", + .pm = &meson_gxbb_wdt_pm_ops, + .of_match_table = meson_gxbb_wdt_dt_ids, + }, +}; + +module_platform_driver(meson_gxbb_wdt_driver); + +MODULE_AUTHOR("Neil Armstrong <narmstrong@baylibre.com>"); +MODULE_DESCRIPTION("Amlogic Meson GXBB Watchdog timer driver"); +MODULE_LICENSE("Dual BSD/GPL"); diff --git a/drivers/watchdog/meson_wdt.c b/drivers/watchdog/meson_wdt.c new file mode 100644 index 000000000..cd0275a6c --- /dev/null +++ b/drivers/watchdog/meson_wdt.c @@ -0,0 +1,237 @@ +/* + * Meson Watchdog Driver + * + * Copyright (c) 2014 Carlo Caione + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/err.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/platform_device.h> +#include <linux/types.h> +#include <linux/watchdog.h> + +#define DRV_NAME "meson_wdt" + +#define MESON_WDT_TC 0x00 +#define MESON_WDT_DC_RESET (3 << 24) + +#define MESON_WDT_RESET 0x04 + +#define MESON_WDT_TIMEOUT 30 +#define MESON_WDT_MIN_TIMEOUT 1 + +#define MESON_SEC_TO_TC(s, c) ((s) * (c)) + +static bool nowayout = WATCHDOG_NOWAYOUT; +static unsigned int timeout; + +struct meson_wdt_data { + unsigned int enable; + unsigned int terminal_count_mask; + unsigned int count_unit; +}; + +static struct meson_wdt_data meson6_wdt_data = { + .enable = BIT(22), + .terminal_count_mask = 0x3fffff, + .count_unit = 100000, /* 10 us */ +}; + +static struct meson_wdt_data meson8b_wdt_data = { + .enable = BIT(19), + .terminal_count_mask = 0xffff, + .count_unit = 7812, /* 128 us */ +}; + +struct meson_wdt_dev { + struct watchdog_device wdt_dev; + void __iomem *wdt_base; + const struct meson_wdt_data *data; +}; + +static int meson_wdt_restart(struct watchdog_device *wdt_dev, + unsigned long action, void *data) +{ + struct meson_wdt_dev *meson_wdt = watchdog_get_drvdata(wdt_dev); + u32 tc_reboot = MESON_WDT_DC_RESET; + + tc_reboot |= meson_wdt->data->enable; + + while (1) { + writel(tc_reboot, meson_wdt->wdt_base + MESON_WDT_TC); + mdelay(5); + } + + return 0; +} + +static int meson_wdt_ping(struct watchdog_device *wdt_dev) +{ + struct meson_wdt_dev *meson_wdt = watchdog_get_drvdata(wdt_dev); + + writel(0, meson_wdt->wdt_base + MESON_WDT_RESET); + + return 0; +} + +static void meson_wdt_change_timeout(struct watchdog_device *wdt_dev, + unsigned int timeout) +{ + struct meson_wdt_dev *meson_wdt = watchdog_get_drvdata(wdt_dev); + u32 reg; + + reg = readl(meson_wdt->wdt_base + MESON_WDT_TC); + reg &= ~meson_wdt->data->terminal_count_mask; + reg |= MESON_SEC_TO_TC(timeout, meson_wdt->data->count_unit); + writel(reg, meson_wdt->wdt_base + MESON_WDT_TC); +} + +static int meson_wdt_set_timeout(struct watchdog_device *wdt_dev, + unsigned int timeout) +{ + wdt_dev->timeout = timeout; + + meson_wdt_change_timeout(wdt_dev, timeout); + meson_wdt_ping(wdt_dev); + + return 0; +} + +static int meson_wdt_stop(struct watchdog_device *wdt_dev) +{ + struct meson_wdt_dev *meson_wdt = watchdog_get_drvdata(wdt_dev); + u32 reg; + + reg = readl(meson_wdt->wdt_base + MESON_WDT_TC); + reg &= ~meson_wdt->data->enable; + writel(reg, meson_wdt->wdt_base + MESON_WDT_TC); + + return 0; +} + +static int meson_wdt_start(struct watchdog_device *wdt_dev) +{ + struct meson_wdt_dev *meson_wdt = watchdog_get_drvdata(wdt_dev); + u32 reg; + + meson_wdt_change_timeout(wdt_dev, meson_wdt->wdt_dev.timeout); + meson_wdt_ping(wdt_dev); + + reg = readl(meson_wdt->wdt_base + MESON_WDT_TC); + reg |= meson_wdt->data->enable; + writel(reg, meson_wdt->wdt_base + MESON_WDT_TC); + + return 0; +} + +static const struct watchdog_info meson_wdt_info = { + .identity = DRV_NAME, + .options = WDIOF_SETTIMEOUT | + WDIOF_KEEPALIVEPING | + WDIOF_MAGICCLOSE, +}; + +static const struct watchdog_ops meson_wdt_ops = { + .owner = THIS_MODULE, + .start = meson_wdt_start, + .stop = meson_wdt_stop, + .ping = meson_wdt_ping, + .set_timeout = meson_wdt_set_timeout, + .restart = meson_wdt_restart, +}; + +static const struct of_device_id meson_wdt_dt_ids[] = { + { .compatible = "amlogic,meson6-wdt", .data = &meson6_wdt_data }, + { .compatible = "amlogic,meson8-wdt", .data = &meson6_wdt_data }, + { .compatible = "amlogic,meson8b-wdt", .data = &meson8b_wdt_data }, + { .compatible = "amlogic,meson8m2-wdt", .data = &meson8b_wdt_data }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, meson_wdt_dt_ids); + +static int meson_wdt_probe(struct platform_device *pdev) +{ + struct resource *res; + struct meson_wdt_dev *meson_wdt; + const struct of_device_id *of_id; + int err; + + meson_wdt = devm_kzalloc(&pdev->dev, sizeof(*meson_wdt), GFP_KERNEL); + if (!meson_wdt) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + meson_wdt->wdt_base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(meson_wdt->wdt_base)) + return PTR_ERR(meson_wdt->wdt_base); + + of_id = of_match_device(meson_wdt_dt_ids, &pdev->dev); + if (!of_id) { + dev_err(&pdev->dev, "Unable to initialize WDT data\n"); + return -ENODEV; + } + meson_wdt->data = of_id->data; + + meson_wdt->wdt_dev.parent = &pdev->dev; + meson_wdt->wdt_dev.info = &meson_wdt_info; + meson_wdt->wdt_dev.ops = &meson_wdt_ops; + meson_wdt->wdt_dev.max_timeout = + meson_wdt->data->terminal_count_mask / meson_wdt->data->count_unit; + meson_wdt->wdt_dev.min_timeout = MESON_WDT_MIN_TIMEOUT; + meson_wdt->wdt_dev.timeout = min_t(unsigned int, + MESON_WDT_TIMEOUT, + meson_wdt->wdt_dev.max_timeout); + + watchdog_set_drvdata(&meson_wdt->wdt_dev, meson_wdt); + + watchdog_init_timeout(&meson_wdt->wdt_dev, timeout, &pdev->dev); + watchdog_set_nowayout(&meson_wdt->wdt_dev, nowayout); + watchdog_set_restart_priority(&meson_wdt->wdt_dev, 128); + + meson_wdt_stop(&meson_wdt->wdt_dev); + + watchdog_stop_on_reboot(&meson_wdt->wdt_dev); + err = devm_watchdog_register_device(&pdev->dev, &meson_wdt->wdt_dev); + if (err) + return err; + + dev_info(&pdev->dev, "Watchdog enabled (timeout=%d sec, nowayout=%d)", + meson_wdt->wdt_dev.timeout, nowayout); + + return 0; +} + +static struct platform_driver meson_wdt_driver = { + .probe = meson_wdt_probe, + .driver = { + .name = DRV_NAME, + .of_match_table = meson_wdt_dt_ids, + }, +}; + +module_platform_driver(meson_wdt_driver); + +module_param(timeout, uint, 0); +MODULE_PARM_DESC(timeout, "Watchdog heartbeat in seconds"); + +module_param(nowayout, bool, 0); +MODULE_PARM_DESC(nowayout, + "Watchdog cannot be stopped once started (default=" + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Carlo Caione <carlo@caione.org>"); +MODULE_DESCRIPTION("Meson Watchdog Timer Driver"); diff --git a/drivers/watchdog/mixcomwd.c b/drivers/watchdog/mixcomwd.c new file mode 100644 index 000000000..3cc07447c --- /dev/null +++ b/drivers/watchdog/mixcomwd.c @@ -0,0 +1,317 @@ +/* + * MixCom Watchdog: A Simple Hardware Watchdog Device + * Based on Softdog driver by Alan Cox and PC Watchdog driver by Ken Hollis + * + * Author: Gergely Madarasz <gorgo@itc.hu> + * + * Copyright (c) 1999 ITConsult-Pro Co. <info@itc.hu> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * Version 0.1 (99/04/15): + * - first version + * + * Version 0.2 (99/06/16): + * - added kernel timer watchdog ping after close + * since the hardware does not support watchdog shutdown + * + * Version 0.3 (99/06/21): + * - added WDIOC_GETSTATUS and WDIOC_GETSUPPORT ioctl calls + * + * Version 0.3.1 (99/06/22): + * - allow module removal while internal timer is active, + * print warning about probable reset + * + * Version 0.4 (99/11/15): + * - support for one more type board + * + * Version 0.5 (2001/12/14) Matt Domsch <Matt_Domsch@dell.com> + * - added nowayout module option to override + * CONFIG_WATCHDOG_NOWAYOUT + * + * Version 0.6 (2002/04/12): Rob Radez <rob@osinvestor.com> + * - make mixcomwd_opened unsigned, + * removed lock_kernel/unlock_kernel from mixcomwd_release, + * modified ioctl a bit to conform to API + * + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#define VERSION "0.6" +#define WATCHDOG_NAME "mixcomwd" + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/types.h> +#include <linux/miscdevice.h> +#include <linux/ioport.h> +#include <linux/watchdog.h> +#include <linux/fs.h> +#include <linux/reboot.h> +#include <linux/init.h> +#include <linux/jiffies.h> +#include <linux/timer.h> +#include <linux/uaccess.h> +#include <linux/io.h> + +/* + * We have two types of cards that can be probed: + * 1) The Mixcom cards: these cards can be found at addresses + * 0x180, 0x280, 0x380 with an additional offset of 0xc10. + * (Or 0xd90, 0xe90, 0xf90). + * 2) The FlashCOM cards: these cards can be set up at + * 0x300 -> 0x378, in 0x8 jumps with an offset of 0x04. + * (Or 0x304 -> 0x37c in 0x8 jumps). + * Each card has it's own ID. + */ +#define MIXCOM_ID 0x11 +#define FLASHCOM_ID 0x18 +static struct { + int ioport; + int id; +} mixcomwd_io_info[] = { + /* The Mixcom cards */ + {0x0d90, MIXCOM_ID}, + {0x0e90, MIXCOM_ID}, + {0x0f90, MIXCOM_ID}, + /* The FlashCOM cards */ + {0x0304, FLASHCOM_ID}, + {0x030c, FLASHCOM_ID}, + {0x0314, FLASHCOM_ID}, + {0x031c, FLASHCOM_ID}, + {0x0324, FLASHCOM_ID}, + {0x032c, FLASHCOM_ID}, + {0x0334, FLASHCOM_ID}, + {0x033c, FLASHCOM_ID}, + {0x0344, FLASHCOM_ID}, + {0x034c, FLASHCOM_ID}, + {0x0354, FLASHCOM_ID}, + {0x035c, FLASHCOM_ID}, + {0x0364, FLASHCOM_ID}, + {0x036c, FLASHCOM_ID}, + {0x0374, FLASHCOM_ID}, + {0x037c, FLASHCOM_ID}, + /* The end of the list */ + {0x0000, 0}, +}; + +static void mixcomwd_timerfun(struct timer_list *unused); + +static unsigned long mixcomwd_opened; /* long req'd for setbit --RR */ + +static int watchdog_port; +static int mixcomwd_timer_alive; +static DEFINE_TIMER(mixcomwd_timer, mixcomwd_timerfun); +static char expect_close; + +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); +MODULE_PARM_DESC(nowayout, + "Watchdog cannot be stopped once started (default=" + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); + +static void mixcomwd_ping(void) +{ + outb_p(55, watchdog_port); + return; +} + +static void mixcomwd_timerfun(struct timer_list *unused) +{ + mixcomwd_ping(); + mod_timer(&mixcomwd_timer, jiffies + 5 * HZ); +} + +/* + * Allow only one person to hold it open + */ + +static int mixcomwd_open(struct inode *inode, struct file *file) +{ + if (test_and_set_bit(0, &mixcomwd_opened)) + return -EBUSY; + + mixcomwd_ping(); + + if (nowayout) + /* + * fops_get() code via open() has already done + * a try_module_get() so it is safe to do the + * __module_get(). + */ + __module_get(THIS_MODULE); + else { + if (mixcomwd_timer_alive) { + del_timer(&mixcomwd_timer); + mixcomwd_timer_alive = 0; + } + } + return nonseekable_open(inode, file); +} + +static int mixcomwd_release(struct inode *inode, struct file *file) +{ + if (expect_close == 42) { + if (mixcomwd_timer_alive) { + pr_err("release called while internal timer alive\n"); + return -EBUSY; + } + mixcomwd_timer_alive = 1; + mod_timer(&mixcomwd_timer, jiffies + 5 * HZ); + } else + pr_crit("WDT device closed unexpectedly. WDT will not stop!\n"); + + clear_bit(0, &mixcomwd_opened); + expect_close = 0; + return 0; +} + + +static ssize_t mixcomwd_write(struct file *file, const char __user *data, + size_t len, loff_t *ppos) +{ + if (len) { + if (!nowayout) { + size_t i; + + /* In case it was set long ago */ + expect_close = 0; + + for (i = 0; i != len; i++) { + char c; + if (get_user(c, data + i)) + return -EFAULT; + if (c == 'V') + expect_close = 42; + } + } + mixcomwd_ping(); + } + return len; +} + +static long mixcomwd_ioctl(struct file *file, + unsigned int cmd, unsigned long arg) +{ + void __user *argp = (void __user *)arg; + int __user *p = argp; + int status; + static const struct watchdog_info ident = { + .options = WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE, + .firmware_version = 1, + .identity = "MixCOM watchdog", + }; + + switch (cmd) { + case WDIOC_GETSUPPORT: + if (copy_to_user(argp, &ident, sizeof(ident))) + return -EFAULT; + break; + case WDIOC_GETSTATUS: + status = mixcomwd_opened; + if (!nowayout) + status |= mixcomwd_timer_alive; + return put_user(status, p); + case WDIOC_GETBOOTSTATUS: + return put_user(0, p); + case WDIOC_KEEPALIVE: + mixcomwd_ping(); + break; + default: + return -ENOTTY; + } + return 0; +} + +static const struct file_operations mixcomwd_fops = { + .owner = THIS_MODULE, + .llseek = no_llseek, + .write = mixcomwd_write, + .unlocked_ioctl = mixcomwd_ioctl, + .open = mixcomwd_open, + .release = mixcomwd_release, +}; + +static struct miscdevice mixcomwd_miscdev = { + .minor = WATCHDOG_MINOR, + .name = "watchdog", + .fops = &mixcomwd_fops, +}; + +static int __init checkcard(int port, int card_id) +{ + int id; + + if (!request_region(port, 1, "MixCOM watchdog")) + return 0; + + id = inb_p(port); + if (card_id == MIXCOM_ID) + id &= 0x3f; + + if (id != card_id) { + release_region(port, 1); + return 0; + } + return 1; +} + +static int __init mixcomwd_init(void) +{ + int i, ret, found = 0; + + for (i = 0; !found && mixcomwd_io_info[i].ioport != 0; i++) { + if (checkcard(mixcomwd_io_info[i].ioport, + mixcomwd_io_info[i].id)) { + found = 1; + watchdog_port = mixcomwd_io_info[i].ioport; + } + } + + if (!found) { + pr_err("No card detected, or port not available\n"); + return -ENODEV; + } + + ret = misc_register(&mixcomwd_miscdev); + if (ret) { + pr_err("cannot register miscdev on minor=%d (err=%d)\n", + WATCHDOG_MINOR, ret); + goto error_misc_register_watchdog; + } + + pr_info("MixCOM watchdog driver v%s, watchdog port at 0x%3x\n", + VERSION, watchdog_port); + + return 0; + +error_misc_register_watchdog: + release_region(watchdog_port, 1); + watchdog_port = 0x0000; + return ret; +} + +static void __exit mixcomwd_exit(void) +{ + if (!nowayout) { + if (mixcomwd_timer_alive) { + pr_warn("I quit now, hardware will probably reboot!\n"); + del_timer_sync(&mixcomwd_timer); + mixcomwd_timer_alive = 0; + } + } + misc_deregister(&mixcomwd_miscdev); + release_region(watchdog_port, 1); +} + +module_init(mixcomwd_init); +module_exit(mixcomwd_exit); + +MODULE_AUTHOR("Gergely Madarasz <gorgo@itc.hu>"); +MODULE_DESCRIPTION("MixCom Watchdog driver"); +MODULE_VERSION(VERSION); +MODULE_LICENSE("GPL"); diff --git a/drivers/watchdog/moxart_wdt.c b/drivers/watchdog/moxart_wdt.c new file mode 100644 index 000000000..430c3ab84 --- /dev/null +++ b/drivers/watchdog/moxart_wdt.c @@ -0,0 +1,179 @@ +/* + * MOXA ART SoCs watchdog driver. + * + * Copyright (C) 2013 Jonas Jensen + * + * Jonas Jensen <jonas.jensen@gmail.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/clk.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/mod_devicetable.h> +#include <linux/err.h> +#include <linux/kernel.h> +#include <linux/platform_device.h> +#include <linux/watchdog.h> +#include <linux/moduleparam.h> + +#define REG_COUNT 0x4 +#define REG_MODE 0x8 +#define REG_ENABLE 0xC + +struct moxart_wdt_dev { + struct watchdog_device dev; + void __iomem *base; + unsigned int clock_frequency; +}; + +static int heartbeat; + +static int moxart_wdt_restart(struct watchdog_device *wdt_dev, + unsigned long action, void *data) +{ + struct moxart_wdt_dev *moxart_wdt = watchdog_get_drvdata(wdt_dev); + + writel(1, moxart_wdt->base + REG_COUNT); + writel(0x5ab9, moxart_wdt->base + REG_MODE); + writel(0x03, moxart_wdt->base + REG_ENABLE); + + return 0; +} + +static int moxart_wdt_stop(struct watchdog_device *wdt_dev) +{ + struct moxart_wdt_dev *moxart_wdt = watchdog_get_drvdata(wdt_dev); + + writel(0, moxart_wdt->base + REG_ENABLE); + + return 0; +} + +static int moxart_wdt_start(struct watchdog_device *wdt_dev) +{ + struct moxart_wdt_dev *moxart_wdt = watchdog_get_drvdata(wdt_dev); + + writel(moxart_wdt->clock_frequency * wdt_dev->timeout, + moxart_wdt->base + REG_COUNT); + writel(0x5ab9, moxart_wdt->base + REG_MODE); + writel(0x03, moxart_wdt->base + REG_ENABLE); + + return 0; +} + +static int moxart_wdt_set_timeout(struct watchdog_device *wdt_dev, + unsigned int timeout) +{ + wdt_dev->timeout = timeout; + + return 0; +} + +static const struct watchdog_info moxart_wdt_info = { + .identity = "moxart-wdt", + .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | + WDIOF_MAGICCLOSE, +}; + +static const struct watchdog_ops moxart_wdt_ops = { + .owner = THIS_MODULE, + .start = moxart_wdt_start, + .stop = moxart_wdt_stop, + .set_timeout = moxart_wdt_set_timeout, + .restart = moxart_wdt_restart, +}; + +static int moxart_wdt_probe(struct platform_device *pdev) +{ + struct moxart_wdt_dev *moxart_wdt; + struct device *dev = &pdev->dev; + struct device_node *node = dev->of_node; + struct resource *res; + struct clk *clk; + int err; + unsigned int max_timeout; + bool nowayout = WATCHDOG_NOWAYOUT; + + moxart_wdt = devm_kzalloc(dev, sizeof(*moxart_wdt), GFP_KERNEL); + if (!moxart_wdt) + return -ENOMEM; + + platform_set_drvdata(pdev, moxart_wdt); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + moxart_wdt->base = devm_ioremap_resource(dev, res); + if (IS_ERR(moxart_wdt->base)) + return PTR_ERR(moxart_wdt->base); + + clk = of_clk_get(node, 0); + if (IS_ERR(clk)) { + pr_err("%s: of_clk_get failed\n", __func__); + return PTR_ERR(clk); + } + + moxart_wdt->clock_frequency = clk_get_rate(clk); + if (moxart_wdt->clock_frequency == 0) { + pr_err("%s: incorrect clock frequency\n", __func__); + return -EINVAL; + } + + max_timeout = UINT_MAX / moxart_wdt->clock_frequency; + + moxart_wdt->dev.info = &moxart_wdt_info; + moxart_wdt->dev.ops = &moxart_wdt_ops; + moxart_wdt->dev.timeout = max_timeout; + moxart_wdt->dev.min_timeout = 1; + moxart_wdt->dev.max_timeout = max_timeout; + moxart_wdt->dev.parent = dev; + + watchdog_init_timeout(&moxart_wdt->dev, heartbeat, dev); + watchdog_set_nowayout(&moxart_wdt->dev, nowayout); + watchdog_set_restart_priority(&moxart_wdt->dev, 128); + + watchdog_set_drvdata(&moxart_wdt->dev, moxart_wdt); + + err = watchdog_register_device(&moxart_wdt->dev); + if (err) + return err; + + dev_dbg(dev, "Watchdog enabled (heartbeat=%d sec, nowayout=%d)\n", + moxart_wdt->dev.timeout, nowayout); + + return 0; +} + +static int moxart_wdt_remove(struct platform_device *pdev) +{ + struct moxart_wdt_dev *moxart_wdt = platform_get_drvdata(pdev); + + moxart_wdt_stop(&moxart_wdt->dev); + + return 0; +} + +static const struct of_device_id moxart_watchdog_match[] = { + { .compatible = "moxa,moxart-watchdog" }, + { }, +}; +MODULE_DEVICE_TABLE(of, moxart_watchdog_match); + +static struct platform_driver moxart_wdt_driver = { + .probe = moxart_wdt_probe, + .remove = moxart_wdt_remove, + .driver = { + .name = "moxart-watchdog", + .of_match_table = moxart_watchdog_match, + }, +}; +module_platform_driver(moxart_wdt_driver); + +module_param(heartbeat, int, 0); +MODULE_PARM_DESC(heartbeat, "Watchdog heartbeat in seconds"); + +MODULE_DESCRIPTION("MOXART watchdog driver"); +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Jonas Jensen <jonas.jensen@gmail.com>"); diff --git a/drivers/watchdog/mpc8xxx_wdt.c b/drivers/watchdog/mpc8xxx_wdt.c new file mode 100644 index 000000000..aca2d6323 --- /dev/null +++ b/drivers/watchdog/mpc8xxx_wdt.c @@ -0,0 +1,263 @@ +/* + * mpc8xxx_wdt.c - MPC8xx/MPC83xx/MPC86xx watchdog userspace interface + * + * Authors: Dave Updegraff <dave@cray.org> + * Kumar Gala <galak@kernel.crashing.org> + * Attribution: from 83xx_wst: Florian Schirmer <jolt@tuxbox.org> + * ..and from sc520_wdt + * Copyright (c) 2008 MontaVista Software, Inc. + * Anton Vorontsov <avorontsov@ru.mvista.com> + * + * Note: it appears that you can only actually ENABLE or DISABLE the thing + * once after POR. Once enabled, you cannot disable, and vice versa. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/fs.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/of_address.h> +#include <linux/of_platform.h> +#include <linux/module.h> +#include <linux/watchdog.h> +#include <linux/io.h> +#include <linux/uaccess.h> +#include <sysdev/fsl_soc.h> + +#define WATCHDOG_TIMEOUT 10 + +struct mpc8xxx_wdt { + __be32 res0; + __be32 swcrr; /* System watchdog control register */ +#define SWCRR_SWTC 0xFFFF0000 /* Software Watchdog Time Count. */ +#define SWCRR_SWF 0x00000008 /* Software Watchdog Freeze (mpc8xx). */ +#define SWCRR_SWEN 0x00000004 /* Watchdog Enable bit. */ +#define SWCRR_SWRI 0x00000002 /* Software Watchdog Reset/Interrupt Select bit.*/ +#define SWCRR_SWPR 0x00000001 /* Software Watchdog Counter Prescale bit. */ + __be32 swcnr; /* System watchdog count register */ + u8 res1[2]; + __be16 swsrr; /* System watchdog service register */ + u8 res2[0xF0]; +}; + +struct mpc8xxx_wdt_type { + int prescaler; + bool hw_enabled; +}; + +struct mpc8xxx_wdt_ddata { + struct mpc8xxx_wdt __iomem *base; + struct watchdog_device wdd; + spinlock_t lock; + u16 swtc; +}; + +static u16 timeout; +module_param(timeout, ushort, 0); +MODULE_PARM_DESC(timeout, + "Watchdog timeout in seconds. (1<timeout<65535, default=" + __MODULE_STRING(WATCHDOG_TIMEOUT) ")"); + +static bool reset = 1; +module_param(reset, bool, 0); +MODULE_PARM_DESC(reset, + "Watchdog Interrupt/Reset Mode. 0 = interrupt, 1 = reset"); + +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); +MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started " + "(default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); + +static void mpc8xxx_wdt_keepalive(struct mpc8xxx_wdt_ddata *ddata) +{ + /* Ping the WDT */ + spin_lock(&ddata->lock); + out_be16(&ddata->base->swsrr, 0x556c); + out_be16(&ddata->base->swsrr, 0xaa39); + spin_unlock(&ddata->lock); +} + +static int mpc8xxx_wdt_start(struct watchdog_device *w) +{ + struct mpc8xxx_wdt_ddata *ddata = + container_of(w, struct mpc8xxx_wdt_ddata, wdd); + u32 tmp = in_be32(&ddata->base->swcrr); + + /* Good, fire up the show */ + tmp &= ~(SWCRR_SWTC | SWCRR_SWF | SWCRR_SWEN | SWCRR_SWRI | SWCRR_SWPR); + tmp |= SWCRR_SWEN | SWCRR_SWPR | (ddata->swtc << 16); + + if (reset) + tmp |= SWCRR_SWRI; + + out_be32(&ddata->base->swcrr, tmp); + + tmp = in_be32(&ddata->base->swcrr); + if (!(tmp & SWCRR_SWEN)) + return -EOPNOTSUPP; + + ddata->swtc = tmp >> 16; + set_bit(WDOG_HW_RUNNING, &ddata->wdd.status); + + return 0; +} + +static int mpc8xxx_wdt_ping(struct watchdog_device *w) +{ + struct mpc8xxx_wdt_ddata *ddata = + container_of(w, struct mpc8xxx_wdt_ddata, wdd); + + mpc8xxx_wdt_keepalive(ddata); + return 0; +} + +static struct watchdog_info mpc8xxx_wdt_info = { + .options = WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE | WDIOF_SETTIMEOUT, + .firmware_version = 1, + .identity = "MPC8xxx", +}; + +static struct watchdog_ops mpc8xxx_wdt_ops = { + .owner = THIS_MODULE, + .start = mpc8xxx_wdt_start, + .ping = mpc8xxx_wdt_ping, +}; + +static int mpc8xxx_wdt_probe(struct platform_device *ofdev) +{ + int ret; + struct resource *res; + const struct mpc8xxx_wdt_type *wdt_type; + struct mpc8xxx_wdt_ddata *ddata; + u32 freq = fsl_get_sys_freq(); + bool enabled; + + wdt_type = of_device_get_match_data(&ofdev->dev); + if (!wdt_type) + return -EINVAL; + + if (!freq || freq == -1) + return -EINVAL; + + ddata = devm_kzalloc(&ofdev->dev, sizeof(*ddata), GFP_KERNEL); + if (!ddata) + return -ENOMEM; + + res = platform_get_resource(ofdev, IORESOURCE_MEM, 0); + ddata->base = devm_ioremap_resource(&ofdev->dev, res); + if (IS_ERR(ddata->base)) + return PTR_ERR(ddata->base); + + enabled = in_be32(&ddata->base->swcrr) & SWCRR_SWEN; + if (!enabled && wdt_type->hw_enabled) { + pr_info("could not be enabled in software\n"); + return -ENODEV; + } + + spin_lock_init(&ddata->lock); + + ddata->wdd.info = &mpc8xxx_wdt_info, + ddata->wdd.ops = &mpc8xxx_wdt_ops, + + ddata->wdd.timeout = WATCHDOG_TIMEOUT; + watchdog_init_timeout(&ddata->wdd, timeout, &ofdev->dev); + + watchdog_set_nowayout(&ddata->wdd, nowayout); + + ddata->swtc = min(ddata->wdd.timeout * freq / wdt_type->prescaler, + 0xffffU); + + /* + * If the watchdog was previously enabled or we're running on + * MPC8xxx, we should ping the wdt from the kernel until the + * userspace handles it. + */ + if (enabled) + mpc8xxx_wdt_start(&ddata->wdd); + + ddata->wdd.max_hw_heartbeat_ms = (ddata->swtc * wdt_type->prescaler) / + (freq / 1000); + ddata->wdd.min_timeout = ddata->wdd.max_hw_heartbeat_ms / 1000; + if (ddata->wdd.timeout < ddata->wdd.min_timeout) + ddata->wdd.timeout = ddata->wdd.min_timeout; + + ret = watchdog_register_device(&ddata->wdd); + if (ret) { + pr_err("cannot register watchdog device (err=%d)\n", ret); + return ret; + } + + pr_info("WDT driver for MPC8xxx initialized. mode:%s timeout=%d sec\n", + reset ? "reset" : "interrupt", ddata->wdd.timeout); + + platform_set_drvdata(ofdev, ddata); + return 0; +} + +static int mpc8xxx_wdt_remove(struct platform_device *ofdev) +{ + struct mpc8xxx_wdt_ddata *ddata = platform_get_drvdata(ofdev); + + pr_crit("Watchdog removed, expect the %s soon!\n", + reset ? "reset" : "machine check exception"); + watchdog_unregister_device(&ddata->wdd); + + return 0; +} + +static const struct of_device_id mpc8xxx_wdt_match[] = { + { + .compatible = "mpc83xx_wdt", + .data = &(struct mpc8xxx_wdt_type) { + .prescaler = 0x10000, + }, + }, + { + .compatible = "fsl,mpc8610-wdt", + .data = &(struct mpc8xxx_wdt_type) { + .prescaler = 0x10000, + .hw_enabled = true, + }, + }, + { + .compatible = "fsl,mpc823-wdt", + .data = &(struct mpc8xxx_wdt_type) { + .prescaler = 0x800, + .hw_enabled = true, + }, + }, + {}, +}; +MODULE_DEVICE_TABLE(of, mpc8xxx_wdt_match); + +static struct platform_driver mpc8xxx_wdt_driver = { + .probe = mpc8xxx_wdt_probe, + .remove = mpc8xxx_wdt_remove, + .driver = { + .name = "mpc8xxx_wdt", + .of_match_table = mpc8xxx_wdt_match, + }, +}; + +static int __init mpc8xxx_wdt_init(void) +{ + return platform_driver_register(&mpc8xxx_wdt_driver); +} +arch_initcall(mpc8xxx_wdt_init); + +static void __exit mpc8xxx_wdt_exit(void) +{ + platform_driver_unregister(&mpc8xxx_wdt_driver); +} +module_exit(mpc8xxx_wdt_exit); + +MODULE_AUTHOR("Dave Updegraff, Kumar Gala"); +MODULE_DESCRIPTION("Driver for watchdog timer in MPC8xx/MPC83xx/MPC86xx " + "uProcessors"); +MODULE_LICENSE("GPL"); diff --git a/drivers/watchdog/mt7621_wdt.c b/drivers/watchdog/mt7621_wdt.c new file mode 100644 index 000000000..81208cd3f --- /dev/null +++ b/drivers/watchdog/mt7621_wdt.c @@ -0,0 +1,194 @@ +/* + * Ralink MT7621/MT7628 built-in hardware watchdog timer + * + * Copyright (C) 2014 John Crispin <john@phrozen.org> + * + * This driver was based on: drivers/watchdog/rt2880_wdt.c + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/clk.h> +#include <linux/reset.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/watchdog.h> +#include <linux/moduleparam.h> +#include <linux/platform_device.h> +#include <linux/mod_devicetable.h> + +#include <asm/mach-ralink/ralink_regs.h> + +#define SYSC_RSTSTAT 0x38 +#define WDT_RST_CAUSE BIT(1) + +#define RALINK_WDT_TIMEOUT 30 + +#define TIMER_REG_TMRSTAT 0x00 +#define TIMER_REG_TMR1LOAD 0x24 +#define TIMER_REG_TMR1CTL 0x20 + +#define TMR1CTL_ENABLE BIT(7) +#define TMR1CTL_RESTART BIT(9) +#define TMR1CTL_PRESCALE_SHIFT 16 + +static void __iomem *mt7621_wdt_base; +static struct reset_control *mt7621_wdt_reset; + +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); +MODULE_PARM_DESC(nowayout, + "Watchdog cannot be stopped once started (default=" + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); + +static inline void rt_wdt_w32(unsigned reg, u32 val) +{ + iowrite32(val, mt7621_wdt_base + reg); +} + +static inline u32 rt_wdt_r32(unsigned reg) +{ + return ioread32(mt7621_wdt_base + reg); +} + +static int mt7621_wdt_ping(struct watchdog_device *w) +{ + rt_wdt_w32(TIMER_REG_TMRSTAT, TMR1CTL_RESTART); + + return 0; +} + +static int mt7621_wdt_set_timeout(struct watchdog_device *w, unsigned int t) +{ + w->timeout = t; + rt_wdt_w32(TIMER_REG_TMR1LOAD, t * 1000); + mt7621_wdt_ping(w); + + return 0; +} + +static int mt7621_wdt_start(struct watchdog_device *w) +{ + u32 t; + + /* set the prescaler to 1ms == 1000us */ + rt_wdt_w32(TIMER_REG_TMR1CTL, 1000 << TMR1CTL_PRESCALE_SHIFT); + + mt7621_wdt_set_timeout(w, w->timeout); + + t = rt_wdt_r32(TIMER_REG_TMR1CTL); + t |= TMR1CTL_ENABLE; + rt_wdt_w32(TIMER_REG_TMR1CTL, t); + + return 0; +} + +static int mt7621_wdt_stop(struct watchdog_device *w) +{ + u32 t; + + mt7621_wdt_ping(w); + + t = rt_wdt_r32(TIMER_REG_TMR1CTL); + t &= ~TMR1CTL_ENABLE; + rt_wdt_w32(TIMER_REG_TMR1CTL, t); + + return 0; +} + +static int mt7621_wdt_bootcause(void) +{ + if (rt_sysc_r32(SYSC_RSTSTAT) & WDT_RST_CAUSE) + return WDIOF_CARDRESET; + + return 0; +} + +static int mt7621_wdt_is_running(struct watchdog_device *w) +{ + return !!(rt_wdt_r32(TIMER_REG_TMR1CTL) & TMR1CTL_ENABLE); +} + +static const struct watchdog_info mt7621_wdt_info = { + .identity = "Mediatek Watchdog", + .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE, +}; + +static const struct watchdog_ops mt7621_wdt_ops = { + .owner = THIS_MODULE, + .start = mt7621_wdt_start, + .stop = mt7621_wdt_stop, + .ping = mt7621_wdt_ping, + .set_timeout = mt7621_wdt_set_timeout, +}; + +static struct watchdog_device mt7621_wdt_dev = { + .info = &mt7621_wdt_info, + .ops = &mt7621_wdt_ops, + .min_timeout = 1, + .max_timeout = 0xfffful / 1000, +}; + +static int mt7621_wdt_probe(struct platform_device *pdev) +{ + struct resource *res; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + mt7621_wdt_base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(mt7621_wdt_base)) + return PTR_ERR(mt7621_wdt_base); + + mt7621_wdt_reset = devm_reset_control_get_exclusive(&pdev->dev, NULL); + if (!IS_ERR(mt7621_wdt_reset)) + reset_control_deassert(mt7621_wdt_reset); + + mt7621_wdt_dev.bootstatus = mt7621_wdt_bootcause(); + + watchdog_init_timeout(&mt7621_wdt_dev, mt7621_wdt_dev.max_timeout, + &pdev->dev); + watchdog_set_nowayout(&mt7621_wdt_dev, nowayout); + if (mt7621_wdt_is_running(&mt7621_wdt_dev)) { + /* + * Make sure to apply timeout from watchdog core, taking + * the prescaler of this driver here into account (the + * boot loader might be using a different prescaler). + * + * To avoid spurious resets because of different scaling, + * we first disable the watchdog, set the new prescaler + * and timeout, and then re-enable the watchdog. + */ + mt7621_wdt_stop(&mt7621_wdt_dev); + mt7621_wdt_start(&mt7621_wdt_dev); + set_bit(WDOG_HW_RUNNING, &mt7621_wdt_dev.status); + } + + return devm_watchdog_register_device(&pdev->dev, &mt7621_wdt_dev); +} + +static void mt7621_wdt_shutdown(struct platform_device *pdev) +{ + mt7621_wdt_stop(&mt7621_wdt_dev); +} + +static const struct of_device_id mt7621_wdt_match[] = { + { .compatible = "mediatek,mt7621-wdt" }, + {}, +}; +MODULE_DEVICE_TABLE(of, mt7621_wdt_match); + +static struct platform_driver mt7621_wdt_driver = { + .probe = mt7621_wdt_probe, + .shutdown = mt7621_wdt_shutdown, + .driver = { + .name = KBUILD_MODNAME, + .of_match_table = mt7621_wdt_match, + }, +}; + +module_platform_driver(mt7621_wdt_driver); + +MODULE_DESCRIPTION("MediaTek MT762x hardware watchdog driver"); +MODULE_AUTHOR("John Crispin <john@phrozen.org"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/watchdog/mtk_wdt.c b/drivers/watchdog/mtk_wdt.c new file mode 100644 index 000000000..4baf64f21 --- /dev/null +++ b/drivers/watchdog/mtk_wdt.c @@ -0,0 +1,271 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Mediatek Watchdog Driver + * + * Copyright (C) 2014 Matthias Brugger + * + * Matthias Brugger <matthias.bgg@gmail.com> + * + * Based on sunxi_wdt.c + */ + +#include <linux/err.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/types.h> +#include <linux/watchdog.h> +#include <linux/delay.h> + +#define WDT_MAX_TIMEOUT 31 +#define WDT_MIN_TIMEOUT 1 +#define WDT_LENGTH_TIMEOUT(n) ((n) << 5) + +#define WDT_LENGTH 0x04 +#define WDT_LENGTH_KEY 0x8 + +#define WDT_RST 0x08 +#define WDT_RST_RELOAD 0x1971 + +#define WDT_MODE 0x00 +#define WDT_MODE_EN (1 << 0) +#define WDT_MODE_EXT_POL_LOW (0 << 1) +#define WDT_MODE_EXT_POL_HIGH (1 << 1) +#define WDT_MODE_EXRST_EN (1 << 2) +#define WDT_MODE_IRQ_EN (1 << 3) +#define WDT_MODE_AUTO_START (1 << 4) +#define WDT_MODE_DUAL_EN (1 << 6) +#define WDT_MODE_KEY 0x22000000 + +#define WDT_SWRST 0x14 +#define WDT_SWRST_KEY 0x1209 + +#define DRV_NAME "mtk-wdt" +#define DRV_VERSION "1.0" + +static bool nowayout = WATCHDOG_NOWAYOUT; +static unsigned int timeout; + +struct mtk_wdt_dev { + struct watchdog_device wdt_dev; + void __iomem *wdt_base; +}; + +static int mtk_wdt_restart(struct watchdog_device *wdt_dev, + unsigned long action, void *data) +{ + struct mtk_wdt_dev *mtk_wdt = watchdog_get_drvdata(wdt_dev); + void __iomem *wdt_base; + + wdt_base = mtk_wdt->wdt_base; + + while (1) { + writel(WDT_SWRST_KEY, wdt_base + WDT_SWRST); + mdelay(5); + } + + return 0; +} + +static int mtk_wdt_ping(struct watchdog_device *wdt_dev) +{ + struct mtk_wdt_dev *mtk_wdt = watchdog_get_drvdata(wdt_dev); + void __iomem *wdt_base = mtk_wdt->wdt_base; + + iowrite32(WDT_RST_RELOAD, wdt_base + WDT_RST); + + return 0; +} + +static int mtk_wdt_set_timeout(struct watchdog_device *wdt_dev, + unsigned int timeout) +{ + struct mtk_wdt_dev *mtk_wdt = watchdog_get_drvdata(wdt_dev); + void __iomem *wdt_base = mtk_wdt->wdt_base; + u32 reg; + + wdt_dev->timeout = timeout; + + /* + * One bit is the value of 512 ticks + * The clock has 32 KHz + */ + reg = WDT_LENGTH_TIMEOUT(timeout << 6) | WDT_LENGTH_KEY; + iowrite32(reg, wdt_base + WDT_LENGTH); + + mtk_wdt_ping(wdt_dev); + + return 0; +} + +static int mtk_wdt_stop(struct watchdog_device *wdt_dev) +{ + struct mtk_wdt_dev *mtk_wdt = watchdog_get_drvdata(wdt_dev); + void __iomem *wdt_base = mtk_wdt->wdt_base; + u32 reg; + + reg = readl(wdt_base + WDT_MODE); + reg &= ~WDT_MODE_EN; + reg |= WDT_MODE_KEY; + iowrite32(reg, wdt_base + WDT_MODE); + + return 0; +} + +static int mtk_wdt_start(struct watchdog_device *wdt_dev) +{ + u32 reg; + struct mtk_wdt_dev *mtk_wdt = watchdog_get_drvdata(wdt_dev); + void __iomem *wdt_base = mtk_wdt->wdt_base; + int ret; + + ret = mtk_wdt_set_timeout(wdt_dev, wdt_dev->timeout); + if (ret < 0) + return ret; + + reg = ioread32(wdt_base + WDT_MODE); + reg &= ~(WDT_MODE_IRQ_EN | WDT_MODE_DUAL_EN); + reg |= (WDT_MODE_EN | WDT_MODE_KEY); + iowrite32(reg, wdt_base + WDT_MODE); + + return 0; +} + +static const struct watchdog_info mtk_wdt_info = { + .identity = DRV_NAME, + .options = WDIOF_SETTIMEOUT | + WDIOF_KEEPALIVEPING | + WDIOF_MAGICCLOSE, +}; + +static const struct watchdog_ops mtk_wdt_ops = { + .owner = THIS_MODULE, + .start = mtk_wdt_start, + .stop = mtk_wdt_stop, + .ping = mtk_wdt_ping, + .set_timeout = mtk_wdt_set_timeout, + .restart = mtk_wdt_restart, +}; + +static int mtk_wdt_probe(struct platform_device *pdev) +{ + struct mtk_wdt_dev *mtk_wdt; + struct resource *res; + int err; + + mtk_wdt = devm_kzalloc(&pdev->dev, sizeof(*mtk_wdt), GFP_KERNEL); + if (!mtk_wdt) + return -ENOMEM; + + platform_set_drvdata(pdev, mtk_wdt); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + mtk_wdt->wdt_base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(mtk_wdt->wdt_base)) + return PTR_ERR(mtk_wdt->wdt_base); + + mtk_wdt->wdt_dev.info = &mtk_wdt_info; + mtk_wdt->wdt_dev.ops = &mtk_wdt_ops; + mtk_wdt->wdt_dev.timeout = WDT_MAX_TIMEOUT; + mtk_wdt->wdt_dev.max_timeout = WDT_MAX_TIMEOUT; + mtk_wdt->wdt_dev.min_timeout = WDT_MIN_TIMEOUT; + mtk_wdt->wdt_dev.parent = &pdev->dev; + + watchdog_init_timeout(&mtk_wdt->wdt_dev, timeout, &pdev->dev); + watchdog_set_nowayout(&mtk_wdt->wdt_dev, nowayout); + watchdog_set_restart_priority(&mtk_wdt->wdt_dev, 128); + + watchdog_set_drvdata(&mtk_wdt->wdt_dev, mtk_wdt); + + mtk_wdt_stop(&mtk_wdt->wdt_dev); + + err = watchdog_register_device(&mtk_wdt->wdt_dev); + if (unlikely(err)) + return err; + + dev_info(&pdev->dev, "Watchdog enabled (timeout=%d sec, nowayout=%d)\n", + mtk_wdt->wdt_dev.timeout, nowayout); + + return 0; +} + +static void mtk_wdt_shutdown(struct platform_device *pdev) +{ + struct mtk_wdt_dev *mtk_wdt = platform_get_drvdata(pdev); + + if (watchdog_active(&mtk_wdt->wdt_dev)) + mtk_wdt_stop(&mtk_wdt->wdt_dev); +} + +static int mtk_wdt_remove(struct platform_device *pdev) +{ + struct mtk_wdt_dev *mtk_wdt = platform_get_drvdata(pdev); + + watchdog_unregister_device(&mtk_wdt->wdt_dev); + + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int mtk_wdt_suspend(struct device *dev) +{ + struct mtk_wdt_dev *mtk_wdt = dev_get_drvdata(dev); + + if (watchdog_active(&mtk_wdt->wdt_dev)) + mtk_wdt_stop(&mtk_wdt->wdt_dev); + + return 0; +} + +static int mtk_wdt_resume(struct device *dev) +{ + struct mtk_wdt_dev *mtk_wdt = dev_get_drvdata(dev); + + if (watchdog_active(&mtk_wdt->wdt_dev)) { + mtk_wdt_start(&mtk_wdt->wdt_dev); + mtk_wdt_ping(&mtk_wdt->wdt_dev); + } + + return 0; +} +#endif + +static const struct of_device_id mtk_wdt_dt_ids[] = { + { .compatible = "mediatek,mt6589-wdt" }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, mtk_wdt_dt_ids); + +static const struct dev_pm_ops mtk_wdt_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(mtk_wdt_suspend, + mtk_wdt_resume) +}; + +static struct platform_driver mtk_wdt_driver = { + .probe = mtk_wdt_probe, + .remove = mtk_wdt_remove, + .shutdown = mtk_wdt_shutdown, + .driver = { + .name = DRV_NAME, + .pm = &mtk_wdt_pm_ops, + .of_match_table = mtk_wdt_dt_ids, + }, +}; + +module_platform_driver(mtk_wdt_driver); + +module_param(timeout, uint, 0); +MODULE_PARM_DESC(timeout, "Watchdog heartbeat in seconds"); + +module_param(nowayout, bool, 0); +MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Matthias Brugger <matthias.bgg@gmail.com>"); +MODULE_DESCRIPTION("Mediatek WatchDog Timer Driver"); +MODULE_VERSION(DRV_VERSION); diff --git a/drivers/watchdog/mtx-1_wdt.c b/drivers/watchdog/mtx-1_wdt.c new file mode 100644 index 000000000..1fa7d2b32 --- /dev/null +++ b/drivers/watchdog/mtx-1_wdt.c @@ -0,0 +1,250 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Driver for the MTX-1 Watchdog. + * + * (C) Copyright 2005 4G Systems <info@4g-systems.biz>, + * All Rights Reserved. + * http://www.4g-systems.biz + * + * (C) Copyright 2007 OpenWrt.org, Florian Fainelli <florian@openwrt.org> + * (c) Copyright 2005 4G Systems <info@4g-systems.biz> + * + * Release 0.01. + * Author: Michael Stickel michael.stickel@4g-systems.biz + * + * Release 0.02. + * Author: Florian Fainelli florian@openwrt.org + * use the Linux watchdog/timer APIs + * + * The Watchdog is configured to reset the MTX-1 + * if it is not triggered for 100 seconds. + * It should not be triggered more often than 1.6 seconds. + * + * A timer triggers the watchdog every 5 seconds, until + * it is opened for the first time. After the first open + * it MUST be triggered every 2..95 seconds. + */ + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/types.h> +#include <linux/errno.h> +#include <linux/miscdevice.h> +#include <linux/fs.h> +#include <linux/ioport.h> +#include <linux/timer.h> +#include <linux/completion.h> +#include <linux/jiffies.h> +#include <linux/watchdog.h> +#include <linux/platform_device.h> +#include <linux/io.h> +#include <linux/uaccess.h> +#include <linux/gpio.h> + +#include <asm/mach-au1x00/au1000.h> + +#define MTX1_WDT_INTERVAL (5 * HZ) + +static int ticks = 100 * HZ; + +static struct { + struct completion stop; + spinlock_t lock; + int running; + struct timer_list timer; + int queue; + int default_ticks; + unsigned long inuse; + unsigned gpio; + unsigned int gstate; +} mtx1_wdt_device; + +static void mtx1_wdt_trigger(struct timer_list *unused) +{ + spin_lock(&mtx1_wdt_device.lock); + if (mtx1_wdt_device.running) + ticks--; + + /* toggle wdt gpio */ + mtx1_wdt_device.gstate = !mtx1_wdt_device.gstate; + gpio_set_value(mtx1_wdt_device.gpio, mtx1_wdt_device.gstate); + + if (mtx1_wdt_device.queue && ticks) + mod_timer(&mtx1_wdt_device.timer, jiffies + MTX1_WDT_INTERVAL); + else + complete(&mtx1_wdt_device.stop); + spin_unlock(&mtx1_wdt_device.lock); +} + +static void mtx1_wdt_reset(void) +{ + ticks = mtx1_wdt_device.default_ticks; +} + + +static void mtx1_wdt_start(void) +{ + unsigned long flags; + + spin_lock_irqsave(&mtx1_wdt_device.lock, flags); + if (!mtx1_wdt_device.queue) { + mtx1_wdt_device.queue = 1; + mtx1_wdt_device.gstate = 1; + gpio_set_value(mtx1_wdt_device.gpio, 1); + mod_timer(&mtx1_wdt_device.timer, jiffies + MTX1_WDT_INTERVAL); + } + mtx1_wdt_device.running++; + spin_unlock_irqrestore(&mtx1_wdt_device.lock, flags); +} + +static int mtx1_wdt_stop(void) +{ + unsigned long flags; + + spin_lock_irqsave(&mtx1_wdt_device.lock, flags); + if (mtx1_wdt_device.queue) { + mtx1_wdt_device.queue = 0; + mtx1_wdt_device.gstate = 0; + gpio_set_value(mtx1_wdt_device.gpio, 0); + } + ticks = mtx1_wdt_device.default_ticks; + spin_unlock_irqrestore(&mtx1_wdt_device.lock, flags); + return 0; +} + +/* Filesystem functions */ + +static int mtx1_wdt_open(struct inode *inode, struct file *file) +{ + if (test_and_set_bit(0, &mtx1_wdt_device.inuse)) + return -EBUSY; + return nonseekable_open(inode, file); +} + + +static int mtx1_wdt_release(struct inode *inode, struct file *file) +{ + clear_bit(0, &mtx1_wdt_device.inuse); + return 0; +} + +static long mtx1_wdt_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) +{ + void __user *argp = (void __user *)arg; + int __user *p = (int __user *)argp; + unsigned int value; + static const struct watchdog_info ident = { + .options = WDIOF_CARDRESET, + .identity = "MTX-1 WDT", + }; + + switch (cmd) { + case WDIOC_GETSUPPORT: + if (copy_to_user(argp, &ident, sizeof(ident))) + return -EFAULT; + break; + case WDIOC_GETSTATUS: + case WDIOC_GETBOOTSTATUS: + put_user(0, p); + break; + case WDIOC_SETOPTIONS: + if (get_user(value, p)) + return -EFAULT; + if (value & WDIOS_ENABLECARD) + mtx1_wdt_start(); + else if (value & WDIOS_DISABLECARD) + mtx1_wdt_stop(); + else + return -EINVAL; + return 0; + case WDIOC_KEEPALIVE: + mtx1_wdt_reset(); + break; + default: + return -ENOTTY; + } + return 0; +} + + +static ssize_t mtx1_wdt_write(struct file *file, const char *buf, + size_t count, loff_t *ppos) +{ + if (!count) + return -EIO; + mtx1_wdt_reset(); + return count; +} + +static const struct file_operations mtx1_wdt_fops = { + .owner = THIS_MODULE, + .llseek = no_llseek, + .unlocked_ioctl = mtx1_wdt_ioctl, + .open = mtx1_wdt_open, + .write = mtx1_wdt_write, + .release = mtx1_wdt_release, +}; + + +static struct miscdevice mtx1_wdt_misc = { + .minor = WATCHDOG_MINOR, + .name = "watchdog", + .fops = &mtx1_wdt_fops, +}; + + +static int mtx1_wdt_probe(struct platform_device *pdev) +{ + int ret; + + mtx1_wdt_device.gpio = pdev->resource[0].start; + ret = devm_gpio_request_one(&pdev->dev, mtx1_wdt_device.gpio, + GPIOF_OUT_INIT_HIGH, "mtx1-wdt"); + if (ret < 0) { + dev_err(&pdev->dev, "failed to request gpio"); + return ret; + } + + spin_lock_init(&mtx1_wdt_device.lock); + init_completion(&mtx1_wdt_device.stop); + mtx1_wdt_device.queue = 0; + clear_bit(0, &mtx1_wdt_device.inuse); + timer_setup(&mtx1_wdt_device.timer, mtx1_wdt_trigger, 0); + mtx1_wdt_device.default_ticks = ticks; + + ret = misc_register(&mtx1_wdt_misc); + if (ret < 0) { + dev_err(&pdev->dev, "failed to register\n"); + return ret; + } + mtx1_wdt_start(); + dev_info(&pdev->dev, "MTX-1 Watchdog driver\n"); + return 0; +} + +static int mtx1_wdt_remove(struct platform_device *pdev) +{ + /* FIXME: do we need to lock this test ? */ + if (mtx1_wdt_device.queue) { + mtx1_wdt_device.queue = 0; + wait_for_completion(&mtx1_wdt_device.stop); + } + + misc_deregister(&mtx1_wdt_misc); + return 0; +} + +static struct platform_driver mtx1_wdt_driver = { + .probe = mtx1_wdt_probe, + .remove = mtx1_wdt_remove, + .driver.name = "mtx1-wdt", + .driver.owner = THIS_MODULE, +}; + +module_platform_driver(mtx1_wdt_driver); + +MODULE_AUTHOR("Michael Stickel, Florian Fainelli"); +MODULE_DESCRIPTION("Driver for the MTX-1 watchdog"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:mtx1-wdt"); diff --git a/drivers/watchdog/mv64x60_wdt.c b/drivers/watchdog/mv64x60_wdt.c new file mode 100644 index 000000000..315275d7b --- /dev/null +++ b/drivers/watchdog/mv64x60_wdt.c @@ -0,0 +1,325 @@ +/* + * mv64x60_wdt.c - MV64X60 (Marvell Discovery) watchdog userspace interface + * + * Author: James Chapman <jchapman@katalix.com> + * + * Platform-specific setup code should configure the dog to generate + * interrupt or reset as required. This code only enables/disables + * and services the watchdog. + * + * Derived from mpc8xx_wdt.c, with the following copyright. + * + * 2002 (c) Florian Schirmer <jolt@tuxbox.org> This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/fs.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/miscdevice.h> +#include <linux/module.h> +#include <linux/watchdog.h> +#include <linux/platform_device.h> +#include <linux/mv643xx.h> +#include <linux/uaccess.h> +#include <linux/io.h> + +#define MV64x60_WDT_WDC_OFFSET 0 + +/* + * The watchdog configuration register contains a pair of 2-bit fields, + * 1. a reload field, bits 27-26, which triggers a reload of + * the countdown register, and + * 2. an enable field, bits 25-24, which toggles between + * enabling and disabling the watchdog timer. + * Bit 31 is a read-only field which indicates whether the + * watchdog timer is currently enabled. + * + * The low 24 bits contain the timer reload value. + */ +#define MV64x60_WDC_ENABLE_SHIFT 24 +#define MV64x60_WDC_SERVICE_SHIFT 26 +#define MV64x60_WDC_ENABLED_SHIFT 31 + +#define MV64x60_WDC_ENABLED_TRUE 1 +#define MV64x60_WDC_ENABLED_FALSE 0 + +/* Flags bits */ +#define MV64x60_WDOG_FLAG_OPENED 0 + +static unsigned long wdt_flags; +static int wdt_status; +static void __iomem *mv64x60_wdt_regs; +static int mv64x60_wdt_timeout; +static int mv64x60_wdt_count; +static unsigned int bus_clk; +static char expect_close; +static DEFINE_SPINLOCK(mv64x60_wdt_spinlock); + +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); +MODULE_PARM_DESC(nowayout, + "Watchdog cannot be stopped once started (default=" + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); + +static int mv64x60_wdt_toggle_wdc(int enabled_predicate, int field_shift) +{ + u32 data; + u32 enabled; + int ret = 0; + + spin_lock(&mv64x60_wdt_spinlock); + data = readl(mv64x60_wdt_regs + MV64x60_WDT_WDC_OFFSET); + enabled = (data >> MV64x60_WDC_ENABLED_SHIFT) & 1; + + /* only toggle the requested field if enabled state matches predicate */ + if ((enabled ^ enabled_predicate) == 0) { + /* We write a 1, then a 2 -- to the appropriate field */ + data = (1 << field_shift) | mv64x60_wdt_count; + writel(data, mv64x60_wdt_regs + MV64x60_WDT_WDC_OFFSET); + + data = (2 << field_shift) | mv64x60_wdt_count; + writel(data, mv64x60_wdt_regs + MV64x60_WDT_WDC_OFFSET); + ret = 1; + } + spin_unlock(&mv64x60_wdt_spinlock); + + return ret; +} + +static void mv64x60_wdt_service(void) +{ + mv64x60_wdt_toggle_wdc(MV64x60_WDC_ENABLED_TRUE, + MV64x60_WDC_SERVICE_SHIFT); +} + +static void mv64x60_wdt_handler_enable(void) +{ + if (mv64x60_wdt_toggle_wdc(MV64x60_WDC_ENABLED_FALSE, + MV64x60_WDC_ENABLE_SHIFT)) { + mv64x60_wdt_service(); + pr_notice("watchdog activated\n"); + } +} + +static void mv64x60_wdt_handler_disable(void) +{ + if (mv64x60_wdt_toggle_wdc(MV64x60_WDC_ENABLED_TRUE, + MV64x60_WDC_ENABLE_SHIFT)) + pr_notice("watchdog deactivated\n"); +} + +static void mv64x60_wdt_set_timeout(unsigned int timeout) +{ + /* maximum bus cycle count is 0xFFFFFFFF */ + if (timeout > 0xFFFFFFFF / bus_clk) + timeout = 0xFFFFFFFF / bus_clk; + + mv64x60_wdt_count = timeout * bus_clk >> 8; + mv64x60_wdt_timeout = timeout; +} + +static int mv64x60_wdt_open(struct inode *inode, struct file *file) +{ + if (test_and_set_bit(MV64x60_WDOG_FLAG_OPENED, &wdt_flags)) + return -EBUSY; + + if (nowayout) + __module_get(THIS_MODULE); + + mv64x60_wdt_handler_enable(); + + return nonseekable_open(inode, file); +} + +static int mv64x60_wdt_release(struct inode *inode, struct file *file) +{ + if (expect_close == 42) + mv64x60_wdt_handler_disable(); + else { + pr_crit("unexpected close, not stopping timer!\n"); + mv64x60_wdt_service(); + } + expect_close = 0; + + clear_bit(MV64x60_WDOG_FLAG_OPENED, &wdt_flags); + + return 0; +} + +static ssize_t mv64x60_wdt_write(struct file *file, const char __user *data, + size_t len, loff_t *ppos) +{ + if (len) { + if (!nowayout) { + size_t i; + + expect_close = 0; + + for (i = 0; i != len; i++) { + char c; + if (get_user(c, data + i)) + return -EFAULT; + if (c == 'V') + expect_close = 42; + } + } + mv64x60_wdt_service(); + } + + return len; +} + +static long mv64x60_wdt_ioctl(struct file *file, + unsigned int cmd, unsigned long arg) +{ + int timeout; + int options; + void __user *argp = (void __user *)arg; + static const struct watchdog_info info = { + .options = WDIOF_SETTIMEOUT | + WDIOF_MAGICCLOSE | + WDIOF_KEEPALIVEPING, + .firmware_version = 0, + .identity = "MV64x60 watchdog", + }; + + switch (cmd) { + case WDIOC_GETSUPPORT: + if (copy_to_user(argp, &info, sizeof(info))) + return -EFAULT; + break; + + case WDIOC_GETSTATUS: + case WDIOC_GETBOOTSTATUS: + if (put_user(wdt_status, (int __user *)argp)) + return -EFAULT; + wdt_status &= ~WDIOF_KEEPALIVEPING; + break; + + case WDIOC_GETTEMP: + return -EOPNOTSUPP; + + case WDIOC_SETOPTIONS: + if (get_user(options, (int __user *)argp)) + return -EFAULT; + + if (options & WDIOS_DISABLECARD) + mv64x60_wdt_handler_disable(); + + if (options & WDIOS_ENABLECARD) + mv64x60_wdt_handler_enable(); + break; + + case WDIOC_KEEPALIVE: + mv64x60_wdt_service(); + wdt_status |= WDIOF_KEEPALIVEPING; + break; + + case WDIOC_SETTIMEOUT: + if (get_user(timeout, (int __user *)argp)) + return -EFAULT; + mv64x60_wdt_set_timeout(timeout); + /* Fall through */ + + case WDIOC_GETTIMEOUT: + if (put_user(mv64x60_wdt_timeout, (int __user *)argp)) + return -EFAULT; + break; + + default: + return -ENOTTY; + } + + return 0; +} + +static const struct file_operations mv64x60_wdt_fops = { + .owner = THIS_MODULE, + .llseek = no_llseek, + .write = mv64x60_wdt_write, + .unlocked_ioctl = mv64x60_wdt_ioctl, + .open = mv64x60_wdt_open, + .release = mv64x60_wdt_release, +}; + +static struct miscdevice mv64x60_wdt_miscdev = { + .minor = WATCHDOG_MINOR, + .name = "watchdog", + .fops = &mv64x60_wdt_fops, +}; + +static int mv64x60_wdt_probe(struct platform_device *dev) +{ + struct mv64x60_wdt_pdata *pdata = dev_get_platdata(&dev->dev); + struct resource *r; + int timeout = 10; + + bus_clk = 133; /* in MHz */ + if (pdata) { + timeout = pdata->timeout; + bus_clk = pdata->bus_clk; + } + + /* Since bus_clk is truncated MHz, actual frequency could be + * up to 1MHz higher. Round up, since it's better to time out + * too late than too soon. + */ + bus_clk++; + bus_clk *= 1000000; /* convert to Hz */ + + r = platform_get_resource(dev, IORESOURCE_MEM, 0); + if (!r) + return -ENODEV; + + mv64x60_wdt_regs = devm_ioremap(&dev->dev, r->start, resource_size(r)); + if (mv64x60_wdt_regs == NULL) + return -ENOMEM; + + mv64x60_wdt_set_timeout(timeout); + + mv64x60_wdt_handler_disable(); /* in case timer was already running */ + + return misc_register(&mv64x60_wdt_miscdev); +} + +static int mv64x60_wdt_remove(struct platform_device *dev) +{ + misc_deregister(&mv64x60_wdt_miscdev); + + mv64x60_wdt_handler_disable(); + + return 0; +} + +static struct platform_driver mv64x60_wdt_driver = { + .probe = mv64x60_wdt_probe, + .remove = mv64x60_wdt_remove, + .driver = { + .name = MV64x60_WDT_NAME, + }, +}; + +static int __init mv64x60_wdt_init(void) +{ + pr_info("MV64x60 watchdog driver\n"); + + return platform_driver_register(&mv64x60_wdt_driver); +} + +static void __exit mv64x60_wdt_exit(void) +{ + platform_driver_unregister(&mv64x60_wdt_driver); +} + +module_init(mv64x60_wdt_init); +module_exit(mv64x60_wdt_exit); + +MODULE_AUTHOR("James Chapman <jchapman@katalix.com>"); +MODULE_DESCRIPTION("MV64x60 watchdog driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:" MV64x60_WDT_NAME); diff --git a/drivers/watchdog/ni903x_wdt.c b/drivers/watchdog/ni903x_wdt.c new file mode 100644 index 000000000..dc67742e9 --- /dev/null +++ b/drivers/watchdog/ni903x_wdt.c @@ -0,0 +1,270 @@ +/* + * Copyright (C) 2016 National Instruments Corp. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/acpi.h> +#include <linux/device.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/watchdog.h> + +#define NIWD_CONTROL 0x01 +#define NIWD_COUNTER2 0x02 +#define NIWD_COUNTER1 0x03 +#define NIWD_COUNTER0 0x04 +#define NIWD_SEED2 0x05 +#define NIWD_SEED1 0x06 +#define NIWD_SEED0 0x07 + +#define NIWD_IO_SIZE 0x08 + +#define NIWD_CONTROL_MODE 0x80 +#define NIWD_CONTROL_PROC_RESET 0x20 +#define NIWD_CONTROL_PET 0x10 +#define NIWD_CONTROL_RUNNING 0x08 +#define NIWD_CONTROL_CAPTURECOUNTER 0x04 +#define NIWD_CONTROL_RESET 0x02 +#define NIWD_CONTROL_ALARM 0x01 + +#define NIWD_PERIOD_NS 30720 +#define NIWD_MIN_TIMEOUT 1 +#define NIWD_MAX_TIMEOUT 515 +#define NIWD_DEFAULT_TIMEOUT 60 + +#define NIWD_NAME "ni903x_wdt" + +struct ni903x_wdt { + struct device *dev; + u16 io_base; + struct watchdog_device wdd; +}; + +static unsigned int timeout; +module_param(timeout, uint, 0); +MODULE_PARM_DESC(timeout, + "Watchdog timeout in seconds. (default=" + __MODULE_STRING(NIWD_DEFAULT_TIMEOUT) ")"); + +static int nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, int, S_IRUGO); +MODULE_PARM_DESC(nowayout, + "Watchdog cannot be stopped once started (default=" + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); + +static void ni903x_start(struct ni903x_wdt *wdt) +{ + u8 control = inb(wdt->io_base + NIWD_CONTROL); + + outb(control | NIWD_CONTROL_RESET, wdt->io_base + NIWD_CONTROL); + outb(control | NIWD_CONTROL_PET, wdt->io_base + NIWD_CONTROL); +} + +static int ni903x_wdd_set_timeout(struct watchdog_device *wdd, + unsigned int timeout) +{ + struct ni903x_wdt *wdt = watchdog_get_drvdata(wdd); + u32 counter = timeout * (1000000000 / NIWD_PERIOD_NS); + + outb(((0x00FF0000 & counter) >> 16), wdt->io_base + NIWD_SEED2); + outb(((0x0000FF00 & counter) >> 8), wdt->io_base + NIWD_SEED1); + outb((0x000000FF & counter), wdt->io_base + NIWD_SEED0); + + wdd->timeout = timeout; + + return 0; +} + +static unsigned int ni903x_wdd_get_timeleft(struct watchdog_device *wdd) +{ + struct ni903x_wdt *wdt = watchdog_get_drvdata(wdd); + u8 control, counter0, counter1, counter2; + u32 counter; + + control = inb(wdt->io_base + NIWD_CONTROL); + control |= NIWD_CONTROL_CAPTURECOUNTER; + outb(control, wdt->io_base + NIWD_CONTROL); + + counter2 = inb(wdt->io_base + NIWD_COUNTER2); + counter1 = inb(wdt->io_base + NIWD_COUNTER1); + counter0 = inb(wdt->io_base + NIWD_COUNTER0); + + counter = (counter2 << 16) | (counter1 << 8) | counter0; + + return counter / (1000000000 / NIWD_PERIOD_NS); +} + +static int ni903x_wdd_ping(struct watchdog_device *wdd) +{ + struct ni903x_wdt *wdt = watchdog_get_drvdata(wdd); + u8 control; + + control = inb(wdt->io_base + NIWD_CONTROL); + outb(control | NIWD_CONTROL_PET, wdt->io_base + NIWD_CONTROL); + + return 0; +} + +static int ni903x_wdd_start(struct watchdog_device *wdd) +{ + struct ni903x_wdt *wdt = watchdog_get_drvdata(wdd); + + outb(NIWD_CONTROL_RESET | NIWD_CONTROL_PROC_RESET, + wdt->io_base + NIWD_CONTROL); + + ni903x_wdd_set_timeout(wdd, wdd->timeout); + ni903x_start(wdt); + + return 0; +} + +static int ni903x_wdd_stop(struct watchdog_device *wdd) +{ + struct ni903x_wdt *wdt = watchdog_get_drvdata(wdd); + + outb(NIWD_CONTROL_RESET, wdt->io_base + NIWD_CONTROL); + + return 0; +} + +static acpi_status ni903x_resources(struct acpi_resource *res, void *data) +{ + struct ni903x_wdt *wdt = data; + u16 io_size; + + switch (res->type) { + case ACPI_RESOURCE_TYPE_IO: + if (wdt->io_base != 0) { + dev_err(wdt->dev, "too many IO resources\n"); + return AE_ERROR; + } + + wdt->io_base = res->data.io.minimum; + io_size = res->data.io.address_length; + + if (io_size < NIWD_IO_SIZE) { + dev_err(wdt->dev, "memory region too small\n"); + return AE_ERROR; + } + + if (!devm_request_region(wdt->dev, wdt->io_base, io_size, + NIWD_NAME)) { + dev_err(wdt->dev, "failed to get memory region\n"); + return AE_ERROR; + } + + return AE_OK; + + case ACPI_RESOURCE_TYPE_END_TAG: + default: + /* Ignore unsupported resources, e.g. IRQ */ + return AE_OK; + } +} + +static const struct watchdog_info ni903x_wdd_info = { + .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE, + .identity = "NI Watchdog", +}; + +static const struct watchdog_ops ni903x_wdd_ops = { + .owner = THIS_MODULE, + .start = ni903x_wdd_start, + .stop = ni903x_wdd_stop, + .ping = ni903x_wdd_ping, + .set_timeout = ni903x_wdd_set_timeout, + .get_timeleft = ni903x_wdd_get_timeleft, +}; + +static int ni903x_acpi_add(struct acpi_device *device) +{ + struct device *dev = &device->dev; + struct watchdog_device *wdd; + struct ni903x_wdt *wdt; + acpi_status status; + int ret; + + wdt = devm_kzalloc(dev, sizeof(*wdt), GFP_KERNEL); + if (!wdt) + return -ENOMEM; + + device->driver_data = wdt; + wdt->dev = dev; + + status = acpi_walk_resources(device->handle, METHOD_NAME__CRS, + ni903x_resources, wdt); + if (ACPI_FAILURE(status) || wdt->io_base == 0) { + dev_err(dev, "failed to get resources\n"); + return -ENODEV; + } + + wdd = &wdt->wdd; + wdd->info = &ni903x_wdd_info; + wdd->ops = &ni903x_wdd_ops; + wdd->min_timeout = NIWD_MIN_TIMEOUT; + wdd->max_timeout = NIWD_MAX_TIMEOUT; + wdd->timeout = NIWD_DEFAULT_TIMEOUT; + wdd->parent = dev; + watchdog_set_drvdata(wdd, wdt); + watchdog_set_nowayout(wdd, nowayout); + ret = watchdog_init_timeout(wdd, timeout, dev); + if (ret) + dev_err(dev, "unable to set timeout value, using default\n"); + + ret = watchdog_register_device(wdd); + if (ret) { + dev_err(dev, "failed to register watchdog\n"); + return ret; + } + + /* Switch from boot mode to user mode */ + outb(NIWD_CONTROL_RESET | NIWD_CONTROL_MODE, + wdt->io_base + NIWD_CONTROL); + + dev_dbg(dev, "io_base=0x%04X, timeout=%d, nowayout=%d\n", + wdt->io_base, timeout, nowayout); + + return 0; +} + +static int ni903x_acpi_remove(struct acpi_device *device) +{ + struct ni903x_wdt *wdt = acpi_driver_data(device); + + ni903x_wdd_stop(&wdt->wdd); + watchdog_unregister_device(&wdt->wdd); + + return 0; +} + +static const struct acpi_device_id ni903x_device_ids[] = { + {"NIC775C", 0}, + {"", 0}, +}; +MODULE_DEVICE_TABLE(acpi, ni903x_device_ids); + +static struct acpi_driver ni903x_acpi_driver = { + .name = NIWD_NAME, + .ids = ni903x_device_ids, + .ops = { + .add = ni903x_acpi_add, + .remove = ni903x_acpi_remove, + }, +}; + +module_acpi_driver(ni903x_acpi_driver); + +MODULE_DESCRIPTION("NI 903x Watchdog"); +MODULE_AUTHOR("Jeff Westfahl <jeff.westfahl@ni.com>"); +MODULE_AUTHOR("Kyle Roeschley <kyle.roeschley@ni.com>"); +MODULE_LICENSE("GPL"); diff --git a/drivers/watchdog/nic7018_wdt.c b/drivers/watchdog/nic7018_wdt.c new file mode 100644 index 000000000..dcd265685 --- /dev/null +++ b/drivers/watchdog/nic7018_wdt.c @@ -0,0 +1,265 @@ +/* + * Copyright (C) 2016 National Instruments Corp. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/acpi.h> +#include <linux/bitops.h> +#include <linux/device.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/watchdog.h> + +#define LOCK 0xA5 +#define UNLOCK 0x5A + +#define WDT_CTRL_RESET_EN BIT(7) +#define WDT_RELOAD_PORT_EN BIT(7) + +#define WDT_CTRL 1 +#define WDT_RELOAD_CTRL 2 +#define WDT_PRESET_PRESCALE 4 +#define WDT_REG_LOCK 5 +#define WDT_COUNT 6 +#define WDT_RELOAD_PORT 7 + +#define WDT_MIN_TIMEOUT 1 +#define WDT_MAX_TIMEOUT 464 +#define WDT_DEFAULT_TIMEOUT 80 + +#define WDT_MAX_COUNTER 15 + +static unsigned int timeout; +module_param(timeout, uint, 0); +MODULE_PARM_DESC(timeout, + "Watchdog timeout in seconds. (default=" + __MODULE_STRING(WDT_DEFAULT_TIMEOUT) ")"); + +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); +MODULE_PARM_DESC(nowayout, + "Watchdog cannot be stopped once started. (default=" + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); + +struct nic7018_wdt { + u16 io_base; + u32 period; + struct watchdog_device wdd; +}; + +struct nic7018_config { + u32 period; + u8 divider; +}; + +static const struct nic7018_config nic7018_configs[] = { + { 2, 4 }, + { 32, 5 }, +}; + +static inline u32 nic7018_timeout(u32 period, u8 counter) +{ + return period * counter - period / 2; +} + +static const struct nic7018_config *nic7018_get_config(u32 timeout, + u8 *counter) +{ + const struct nic7018_config *config; + u8 count; + + if (timeout < 30 && timeout != 16) { + config = &nic7018_configs[0]; + count = timeout / 2 + 1; + } else { + config = &nic7018_configs[1]; + count = DIV_ROUND_UP(timeout + 16, 32); + + if (count > WDT_MAX_COUNTER) + count = WDT_MAX_COUNTER; + } + *counter = count; + return config; +} + +static int nic7018_set_timeout(struct watchdog_device *wdd, + unsigned int timeout) +{ + struct nic7018_wdt *wdt = watchdog_get_drvdata(wdd); + const struct nic7018_config *config; + u8 counter; + + config = nic7018_get_config(timeout, &counter); + + outb(counter << 4 | config->divider, + wdt->io_base + WDT_PRESET_PRESCALE); + + wdd->timeout = nic7018_timeout(config->period, counter); + wdt->period = config->period; + + return 0; +} + +static int nic7018_start(struct watchdog_device *wdd) +{ + struct nic7018_wdt *wdt = watchdog_get_drvdata(wdd); + u8 control; + + nic7018_set_timeout(wdd, wdd->timeout); + + control = inb(wdt->io_base + WDT_RELOAD_CTRL); + outb(control | WDT_RELOAD_PORT_EN, wdt->io_base + WDT_RELOAD_CTRL); + + outb(1, wdt->io_base + WDT_RELOAD_PORT); + + control = inb(wdt->io_base + WDT_CTRL); + outb(control | WDT_CTRL_RESET_EN, wdt->io_base + WDT_CTRL); + + return 0; +} + +static int nic7018_stop(struct watchdog_device *wdd) +{ + struct nic7018_wdt *wdt = watchdog_get_drvdata(wdd); + + outb(0, wdt->io_base + WDT_CTRL); + outb(0, wdt->io_base + WDT_RELOAD_CTRL); + outb(0xF0, wdt->io_base + WDT_PRESET_PRESCALE); + + return 0; +} + +static int nic7018_ping(struct watchdog_device *wdd) +{ + struct nic7018_wdt *wdt = watchdog_get_drvdata(wdd); + + outb(1, wdt->io_base + WDT_RELOAD_PORT); + + return 0; +} + +static unsigned int nic7018_get_timeleft(struct watchdog_device *wdd) +{ + struct nic7018_wdt *wdt = watchdog_get_drvdata(wdd); + u8 count; + + count = inb(wdt->io_base + WDT_COUNT) & 0xF; + if (!count) + return 0; + + return nic7018_timeout(wdt->period, count); +} + +static const struct watchdog_info nic7018_wdd_info = { + .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE, + .identity = "NIC7018 Watchdog", +}; + +static const struct watchdog_ops nic7018_wdd_ops = { + .owner = THIS_MODULE, + .start = nic7018_start, + .stop = nic7018_stop, + .ping = nic7018_ping, + .set_timeout = nic7018_set_timeout, + .get_timeleft = nic7018_get_timeleft, +}; + +static int nic7018_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct watchdog_device *wdd; + struct nic7018_wdt *wdt; + struct resource *io_rc; + int ret; + + wdt = devm_kzalloc(dev, sizeof(*wdt), GFP_KERNEL); + if (!wdt) + return -ENOMEM; + + platform_set_drvdata(pdev, wdt); + + io_rc = platform_get_resource(pdev, IORESOURCE_IO, 0); + if (!io_rc) { + dev_err(dev, "missing IO resources\n"); + return -EINVAL; + } + + if (!devm_request_region(dev, io_rc->start, resource_size(io_rc), + KBUILD_MODNAME)) { + dev_err(dev, "failed to get IO region\n"); + return -EBUSY; + } + + wdt->io_base = io_rc->start; + wdd = &wdt->wdd; + wdd->info = &nic7018_wdd_info; + wdd->ops = &nic7018_wdd_ops; + wdd->min_timeout = WDT_MIN_TIMEOUT; + wdd->max_timeout = WDT_MAX_TIMEOUT; + wdd->timeout = WDT_DEFAULT_TIMEOUT; + wdd->parent = dev; + + watchdog_set_drvdata(wdd, wdt); + watchdog_set_nowayout(wdd, nowayout); + + ret = watchdog_init_timeout(wdd, timeout, dev); + if (ret) + dev_warn(dev, "unable to set timeout value, using default\n"); + + /* Unlock WDT register */ + outb(UNLOCK, wdt->io_base + WDT_REG_LOCK); + + ret = watchdog_register_device(wdd); + if (ret) { + outb(LOCK, wdt->io_base + WDT_REG_LOCK); + dev_err(dev, "failed to register watchdog\n"); + return ret; + } + + dev_dbg(dev, "io_base=0x%04X, timeout=%d, nowayout=%d\n", + wdt->io_base, timeout, nowayout); + return 0; +} + +static int nic7018_remove(struct platform_device *pdev) +{ + struct nic7018_wdt *wdt = platform_get_drvdata(pdev); + + watchdog_unregister_device(&wdt->wdd); + + /* Lock WDT register */ + outb(LOCK, wdt->io_base + WDT_REG_LOCK); + + return 0; +} + +static const struct acpi_device_id nic7018_device_ids[] = { + {"NIC7018", 0}, + {"", 0}, +}; +MODULE_DEVICE_TABLE(acpi, nic7018_device_ids); + +static struct platform_driver watchdog_driver = { + .probe = nic7018_probe, + .remove = nic7018_remove, + .driver = { + .name = KBUILD_MODNAME, + .acpi_match_table = ACPI_PTR(nic7018_device_ids), + }, +}; + +module_platform_driver(watchdog_driver); + +MODULE_DESCRIPTION("National Instruments NIC7018 Watchdog driver"); +MODULE_AUTHOR("Hui Chun Ong <hui.chun.ong@ni.com>"); +MODULE_LICENSE("GPL"); diff --git a/drivers/watchdog/npcm_wdt.c b/drivers/watchdog/npcm_wdt.c new file mode 100644 index 000000000..0d4213652 --- /dev/null +++ b/drivers/watchdog/npcm_wdt.c @@ -0,0 +1,254 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (c) 2018 Nuvoton Technology corporation. +// Copyright (c) 2018 IBM Corp. + +#include <linux/bitops.h> +#include <linux/delay.h> +#include <linux/interrupt.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/of_irq.h> +#include <linux/platform_device.h> +#include <linux/slab.h> +#include <linux/watchdog.h> + +#define NPCM_WTCR 0x1C + +#define NPCM_WTCLK (BIT(10) | BIT(11)) /* Clock divider */ +#define NPCM_WTE BIT(7) /* Enable */ +#define NPCM_WTIE BIT(6) /* Enable irq */ +#define NPCM_WTIS (BIT(4) | BIT(5)) /* Interval selection */ +#define NPCM_WTIF BIT(3) /* Interrupt flag*/ +#define NPCM_WTRF BIT(2) /* Reset flag */ +#define NPCM_WTRE BIT(1) /* Reset enable */ +#define NPCM_WTR BIT(0) /* Reset counter */ + +/* + * Watchdog timeouts + * + * 170 msec: WTCLK=01 WTIS=00 VAL= 0x400 + * 670 msec: WTCLK=01 WTIS=01 VAL= 0x410 + * 1360 msec: WTCLK=10 WTIS=00 VAL= 0x800 + * 2700 msec: WTCLK=01 WTIS=10 VAL= 0x420 + * 5360 msec: WTCLK=10 WTIS=01 VAL= 0x810 + * 10700 msec: WTCLK=01 WTIS=11 VAL= 0x430 + * 21600 msec: WTCLK=10 WTIS=10 VAL= 0x820 + * 43000 msec: WTCLK=11 WTIS=00 VAL= 0xC00 + * 85600 msec: WTCLK=10 WTIS=11 VAL= 0x830 + * 172000 msec: WTCLK=11 WTIS=01 VAL= 0xC10 + * 687000 msec: WTCLK=11 WTIS=10 VAL= 0xC20 + * 2750000 msec: WTCLK=11 WTIS=11 VAL= 0xC30 + */ + +struct npcm_wdt { + struct watchdog_device wdd; + void __iomem *reg; +}; + +static inline struct npcm_wdt *to_npcm_wdt(struct watchdog_device *wdd) +{ + return container_of(wdd, struct npcm_wdt, wdd); +} + +static int npcm_wdt_ping(struct watchdog_device *wdd) +{ + struct npcm_wdt *wdt = to_npcm_wdt(wdd); + u32 val; + + val = readl(wdt->reg); + writel(val | NPCM_WTR, wdt->reg); + + return 0; +} + +static int npcm_wdt_start(struct watchdog_device *wdd) +{ + struct npcm_wdt *wdt = to_npcm_wdt(wdd); + u32 val; + + if (wdd->timeout < 2) + val = 0x800; + else if (wdd->timeout < 3) + val = 0x420; + else if (wdd->timeout < 6) + val = 0x810; + else if (wdd->timeout < 11) + val = 0x430; + else if (wdd->timeout < 22) + val = 0x820; + else if (wdd->timeout < 44) + val = 0xC00; + else if (wdd->timeout < 87) + val = 0x830; + else if (wdd->timeout < 173) + val = 0xC10; + else if (wdd->timeout < 688) + val = 0xC20; + else + val = 0xC30; + + val |= NPCM_WTRE | NPCM_WTE | NPCM_WTR | NPCM_WTIE; + + writel(val, wdt->reg); + + return 0; +} + +static int npcm_wdt_stop(struct watchdog_device *wdd) +{ + struct npcm_wdt *wdt = to_npcm_wdt(wdd); + + writel(0, wdt->reg); + + return 0; +} + + +static int npcm_wdt_set_timeout(struct watchdog_device *wdd, + unsigned int timeout) +{ + if (timeout < 2) + wdd->timeout = 1; + else if (timeout < 3) + wdd->timeout = 2; + else if (timeout < 6) + wdd->timeout = 5; + else if (timeout < 11) + wdd->timeout = 10; + else if (timeout < 22) + wdd->timeout = 21; + else if (timeout < 44) + wdd->timeout = 43; + else if (timeout < 87) + wdd->timeout = 86; + else if (timeout < 173) + wdd->timeout = 172; + else if (timeout < 688) + wdd->timeout = 687; + else + wdd->timeout = 2750; + + if (watchdog_active(wdd)) + npcm_wdt_start(wdd); + + return 0; +} + +static irqreturn_t npcm_wdt_interrupt(int irq, void *data) +{ + struct npcm_wdt *wdt = data; + + watchdog_notify_pretimeout(&wdt->wdd); + + return IRQ_HANDLED; +} + +static int npcm_wdt_restart(struct watchdog_device *wdd, + unsigned long action, void *data) +{ + struct npcm_wdt *wdt = to_npcm_wdt(wdd); + + writel(NPCM_WTR | NPCM_WTRE | NPCM_WTE, wdt->reg); + udelay(1000); + + return 0; +} + +static bool npcm_is_running(struct watchdog_device *wdd) +{ + struct npcm_wdt *wdt = to_npcm_wdt(wdd); + + return readl(wdt->reg) & NPCM_WTE; +} + +static const struct watchdog_info npcm_wdt_info = { + .identity = KBUILD_MODNAME, + .options = WDIOF_SETTIMEOUT + | WDIOF_KEEPALIVEPING + | WDIOF_MAGICCLOSE, +}; + +static const struct watchdog_ops npcm_wdt_ops = { + .owner = THIS_MODULE, + .start = npcm_wdt_start, + .stop = npcm_wdt_stop, + .ping = npcm_wdt_ping, + .set_timeout = npcm_wdt_set_timeout, + .restart = npcm_wdt_restart, +}; + +static int npcm_wdt_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct npcm_wdt *wdt; + struct resource *res; + int irq; + int ret; + + wdt = devm_kzalloc(&pdev->dev, sizeof(*wdt), GFP_KERNEL); + if (!wdt) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + wdt->reg = devm_ioremap_resource(dev, res); + if (IS_ERR(wdt->reg)) + return PTR_ERR(wdt->reg); + + irq = platform_get_irq(pdev, 0); + if (irq < 0) + return irq; + + wdt->wdd.info = &npcm_wdt_info; + wdt->wdd.ops = &npcm_wdt_ops; + wdt->wdd.min_timeout = 1; + wdt->wdd.max_timeout = 2750; + wdt->wdd.parent = dev; + + wdt->wdd.timeout = 86; + watchdog_init_timeout(&wdt->wdd, 0, dev); + + /* Ensure timeout is able to be represented by the hardware */ + npcm_wdt_set_timeout(&wdt->wdd, wdt->wdd.timeout); + + if (npcm_is_running(&wdt->wdd)) { + /* Restart with the default or device-tree specified timeout */ + npcm_wdt_start(&wdt->wdd); + set_bit(WDOG_HW_RUNNING, &wdt->wdd.status); + } + + ret = devm_request_irq(dev, irq, npcm_wdt_interrupt, 0, + "watchdog", wdt); + if (ret) + return ret; + + ret = devm_watchdog_register_device(dev, &wdt->wdd); + if (ret) { + dev_err(dev, "failed to register watchdog\n"); + return ret; + } + + dev_info(dev, "NPCM watchdog driver enabled\n"); + + return 0; +} + +#ifdef CONFIG_OF +static const struct of_device_id npcm_wdt_match[] = { + {.compatible = "nuvoton,npcm750-wdt"}, + {}, +}; +MODULE_DEVICE_TABLE(of, npcm_wdt_match); +#endif + +static struct platform_driver npcm_wdt_driver = { + .probe = npcm_wdt_probe, + .driver = { + .name = "npcm-wdt", + .of_match_table = of_match_ptr(npcm_wdt_match), + }, +}; +module_platform_driver(npcm_wdt_driver); + +MODULE_AUTHOR("Joel Stanley"); +MODULE_DESCRIPTION("Watchdog driver for NPCM"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/watchdog/nuc900_wdt.c b/drivers/watchdog/nuc900_wdt.c new file mode 100644 index 000000000..830bd04ff --- /dev/null +++ b/drivers/watchdog/nuc900_wdt.c @@ -0,0 +1,308 @@ +/* + * Copyright (c) 2009 Nuvoton technology corporation. + * + * Wan ZongShun <mcuos.com@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation;version 2 of the License. + * + */ + +#include <linux/bitops.h> +#include <linux/errno.h> +#include <linux/fs.h> +#include <linux/io.h> +#include <linux/clk.h> +#include <linux/kernel.h> +#include <linux/miscdevice.h> +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/platform_device.h> +#include <linux/slab.h> +#include <linux/interrupt.h> +#include <linux/types.h> +#include <linux/watchdog.h> +#include <linux/uaccess.h> + +#define REG_WTCR 0x1c +#define WTCLK (0x01 << 10) +#define WTE (0x01 << 7) /*wdt enable*/ +#define WTIS (0x03 << 4) +#define WTIF (0x01 << 3) +#define WTRF (0x01 << 2) +#define WTRE (0x01 << 1) +#define WTR (0x01 << 0) +/* + * The watchdog time interval can be calculated via following formula: + * WTIS real time interval (formula) + * 0x00 ((2^ 14 ) * ((external crystal freq) / 256))seconds + * 0x01 ((2^ 16 ) * ((external crystal freq) / 256))seconds + * 0x02 ((2^ 18 ) * ((external crystal freq) / 256))seconds + * 0x03 ((2^ 20 ) * ((external crystal freq) / 256))seconds + * + * The external crystal freq is 15Mhz in the nuc900 evaluation board. + * So 0x00 = +-0.28 seconds, 0x01 = +-1.12 seconds, 0x02 = +-4.48 seconds, + * 0x03 = +- 16.92 seconds.. + */ +#define WDT_HW_TIMEOUT 0x02 +#define WDT_TIMEOUT (HZ/2) +#define WDT_HEARTBEAT 15 + +static int heartbeat = WDT_HEARTBEAT; +module_param(heartbeat, int, 0); +MODULE_PARM_DESC(heartbeat, "Watchdog heartbeats in seconds. " + "(default = " __MODULE_STRING(WDT_HEARTBEAT) ")"); + +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); +MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started " + "(default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); + +struct nuc900_wdt { + struct clk *wdt_clock; + struct platform_device *pdev; + void __iomem *wdt_base; + char expect_close; + struct timer_list timer; + spinlock_t wdt_lock; + unsigned long next_heartbeat; +}; + +static unsigned long nuc900wdt_busy; +static struct nuc900_wdt *nuc900_wdt; + +static inline void nuc900_wdt_keepalive(void) +{ + unsigned int val; + + spin_lock(&nuc900_wdt->wdt_lock); + + val = __raw_readl(nuc900_wdt->wdt_base + REG_WTCR); + val |= (WTR | WTIF); + __raw_writel(val, nuc900_wdt->wdt_base + REG_WTCR); + + spin_unlock(&nuc900_wdt->wdt_lock); +} + +static inline void nuc900_wdt_start(void) +{ + unsigned int val; + + spin_lock(&nuc900_wdt->wdt_lock); + + val = __raw_readl(nuc900_wdt->wdt_base + REG_WTCR); + val |= (WTRE | WTE | WTR | WTCLK | WTIF); + val &= ~WTIS; + val |= (WDT_HW_TIMEOUT << 0x04); + __raw_writel(val, nuc900_wdt->wdt_base + REG_WTCR); + + spin_unlock(&nuc900_wdt->wdt_lock); + + nuc900_wdt->next_heartbeat = jiffies + heartbeat * HZ; + mod_timer(&nuc900_wdt->timer, jiffies + WDT_TIMEOUT); +} + +static inline void nuc900_wdt_stop(void) +{ + unsigned int val; + + del_timer(&nuc900_wdt->timer); + + spin_lock(&nuc900_wdt->wdt_lock); + + val = __raw_readl(nuc900_wdt->wdt_base + REG_WTCR); + val &= ~WTE; + __raw_writel(val, nuc900_wdt->wdt_base + REG_WTCR); + + spin_unlock(&nuc900_wdt->wdt_lock); +} + +static inline void nuc900_wdt_ping(void) +{ + nuc900_wdt->next_heartbeat = jiffies + heartbeat * HZ; +} + +static int nuc900_wdt_open(struct inode *inode, struct file *file) +{ + + if (test_and_set_bit(0, &nuc900wdt_busy)) + return -EBUSY; + + nuc900_wdt_start(); + + return nonseekable_open(inode, file); +} + +static int nuc900_wdt_close(struct inode *inode, struct file *file) +{ + if (nuc900_wdt->expect_close == 42) + nuc900_wdt_stop(); + else { + dev_crit(&nuc900_wdt->pdev->dev, + "Unexpected close, not stopping watchdog!\n"); + nuc900_wdt_ping(); + } + + nuc900_wdt->expect_close = 0; + clear_bit(0, &nuc900wdt_busy); + return 0; +} + +static const struct watchdog_info nuc900_wdt_info = { + .identity = "nuc900 watchdog", + .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | + WDIOF_MAGICCLOSE, +}; + +static long nuc900_wdt_ioctl(struct file *file, + unsigned int cmd, unsigned long arg) +{ + void __user *argp = (void __user *)arg; + int __user *p = argp; + int new_value; + + switch (cmd) { + case WDIOC_GETSUPPORT: + return copy_to_user(argp, &nuc900_wdt_info, + sizeof(nuc900_wdt_info)) ? -EFAULT : 0; + case WDIOC_GETSTATUS: + case WDIOC_GETBOOTSTATUS: + return put_user(0, p); + + case WDIOC_KEEPALIVE: + nuc900_wdt_ping(); + return 0; + + case WDIOC_SETTIMEOUT: + if (get_user(new_value, p)) + return -EFAULT; + + heartbeat = new_value; + nuc900_wdt_ping(); + + return put_user(new_value, p); + case WDIOC_GETTIMEOUT: + return put_user(heartbeat, p); + default: + return -ENOTTY; + } +} + +static ssize_t nuc900_wdt_write(struct file *file, const char __user *data, + size_t len, loff_t *ppos) +{ + if (!len) + return 0; + + /* Scan for magic character */ + if (!nowayout) { + size_t i; + + nuc900_wdt->expect_close = 0; + + for (i = 0; i < len; i++) { + char c; + if (get_user(c, data + i)) + return -EFAULT; + if (c == 'V') { + nuc900_wdt->expect_close = 42; + break; + } + } + } + + nuc900_wdt_ping(); + return len; +} + +static void nuc900_wdt_timer_ping(struct timer_list *unused) +{ + if (time_before(jiffies, nuc900_wdt->next_heartbeat)) { + nuc900_wdt_keepalive(); + mod_timer(&nuc900_wdt->timer, jiffies + WDT_TIMEOUT); + } else + dev_warn(&nuc900_wdt->pdev->dev, "Will reset the machine !\n"); +} + +static const struct file_operations nuc900wdt_fops = { + .owner = THIS_MODULE, + .llseek = no_llseek, + .unlocked_ioctl = nuc900_wdt_ioctl, + .open = nuc900_wdt_open, + .release = nuc900_wdt_close, + .write = nuc900_wdt_write, +}; + +static struct miscdevice nuc900wdt_miscdev = { + .minor = WATCHDOG_MINOR, + .name = "watchdog", + .fops = &nuc900wdt_fops, +}; + +static int nuc900wdt_probe(struct platform_device *pdev) +{ + struct resource *res; + int ret = 0; + + nuc900_wdt = devm_kzalloc(&pdev->dev, sizeof(*nuc900_wdt), + GFP_KERNEL); + if (!nuc900_wdt) + return -ENOMEM; + + nuc900_wdt->pdev = pdev; + + spin_lock_init(&nuc900_wdt->wdt_lock); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + nuc900_wdt->wdt_base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(nuc900_wdt->wdt_base)) + return PTR_ERR(nuc900_wdt->wdt_base); + + nuc900_wdt->wdt_clock = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(nuc900_wdt->wdt_clock)) { + dev_err(&pdev->dev, "failed to find watchdog clock source\n"); + return PTR_ERR(nuc900_wdt->wdt_clock); + } + + clk_enable(nuc900_wdt->wdt_clock); + + timer_setup(&nuc900_wdt->timer, nuc900_wdt_timer_ping, 0); + + ret = misc_register(&nuc900wdt_miscdev); + if (ret) { + dev_err(&pdev->dev, "err register miscdev on minor=%d (%d)\n", + WATCHDOG_MINOR, ret); + goto err_clk; + } + + return 0; + +err_clk: + clk_disable(nuc900_wdt->wdt_clock); + return ret; +} + +static int nuc900wdt_remove(struct platform_device *pdev) +{ + misc_deregister(&nuc900wdt_miscdev); + + clk_disable(nuc900_wdt->wdt_clock); + + return 0; +} + +static struct platform_driver nuc900wdt_driver = { + .probe = nuc900wdt_probe, + .remove = nuc900wdt_remove, + .driver = { + .name = "nuc900-wdt", + }, +}; + +module_platform_driver(nuc900wdt_driver); + +MODULE_AUTHOR("Wan ZongShun <mcuos.com@gmail.com>"); +MODULE_DESCRIPTION("Watchdog driver for NUC900"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:nuc900-wdt"); diff --git a/drivers/watchdog/nv_tco.c b/drivers/watchdog/nv_tco.c new file mode 100644 index 000000000..a0fabf6f9 --- /dev/null +++ b/drivers/watchdog/nv_tco.c @@ -0,0 +1,518 @@ +/* + * nv_tco 0.01: TCO timer driver for NV chipsets + * + * (c) Copyright 2005 Google Inc., All Rights Reserved. + * + * Based off i8xx_tco.c: + * (c) Copyright 2000 kernel concepts <nils@kernelconcepts.de>, All Rights + * Reserved. + * http://www.kernelconcepts.de + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * TCO timer driver for NV chipsets + * based on softdog.c by Alan Cox <alan@redhat.com> + */ + +/* + * Includes, defines, variables, module parameters, ... + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/types.h> +#include <linux/miscdevice.h> +#include <linux/watchdog.h> +#include <linux/init.h> +#include <linux/fs.h> +#include <linux/pci.h> +#include <linux/ioport.h> +#include <linux/jiffies.h> +#include <linux/platform_device.h> +#include <linux/uaccess.h> +#include <linux/io.h> + +#include "nv_tco.h" + +/* Module and version information */ +#define TCO_VERSION "0.01" +#define TCO_MODULE_NAME "NV_TCO" +#define TCO_DRIVER_NAME TCO_MODULE_NAME ", v" TCO_VERSION + +/* internal variables */ +static unsigned int tcobase; +static DEFINE_SPINLOCK(tco_lock); /* Guards the hardware */ +static unsigned long timer_alive; +static char tco_expect_close; +static struct pci_dev *tco_pci; + +/* the watchdog platform device */ +static struct platform_device *nv_tco_platform_device; + +/* module parameters */ +#define WATCHDOG_HEARTBEAT 30 /* 30 sec default heartbeat (2<heartbeat<39) */ +static int heartbeat = WATCHDOG_HEARTBEAT; /* in seconds */ +module_param(heartbeat, int, 0); +MODULE_PARM_DESC(heartbeat, "Watchdog heartbeat in seconds. (2<heartbeat<39, " + "default=" __MODULE_STRING(WATCHDOG_HEARTBEAT) ")"); + +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); +MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started" + " (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); + +/* + * Some TCO specific functions + */ +static inline unsigned char seconds_to_ticks(int seconds) +{ + /* the internal timer is stored as ticks which decrement + * every 0.6 seconds */ + return (seconds * 10) / 6; +} + +static void tco_timer_start(void) +{ + u32 val; + unsigned long flags; + + spin_lock_irqsave(&tco_lock, flags); + val = inl(TCO_CNT(tcobase)); + val &= ~TCO_CNT_TCOHALT; + outl(val, TCO_CNT(tcobase)); + spin_unlock_irqrestore(&tco_lock, flags); +} + +static void tco_timer_stop(void) +{ + u32 val; + unsigned long flags; + + spin_lock_irqsave(&tco_lock, flags); + val = inl(TCO_CNT(tcobase)); + val |= TCO_CNT_TCOHALT; + outl(val, TCO_CNT(tcobase)); + spin_unlock_irqrestore(&tco_lock, flags); +} + +static void tco_timer_keepalive(void) +{ + unsigned long flags; + + spin_lock_irqsave(&tco_lock, flags); + outb(0x01, TCO_RLD(tcobase)); + spin_unlock_irqrestore(&tco_lock, flags); +} + +static int tco_timer_set_heartbeat(int t) +{ + int ret = 0; + unsigned char tmrval; + unsigned long flags; + u8 val; + + /* + * note seconds_to_ticks(t) > t, so if t > 0x3f, so is + * tmrval=seconds_to_ticks(t). Check that the count in seconds isn't + * out of range on it's own (to avoid overflow in tmrval). + */ + if (t < 0 || t > 0x3f) + return -EINVAL; + tmrval = seconds_to_ticks(t); + + /* "Values of 0h-3h are ignored and should not be attempted" */ + if (tmrval > 0x3f || tmrval < 0x04) + return -EINVAL; + + /* Write new heartbeat to watchdog */ + spin_lock_irqsave(&tco_lock, flags); + val = inb(TCO_TMR(tcobase)); + val &= 0xc0; + val |= tmrval; + outb(val, TCO_TMR(tcobase)); + val = inb(TCO_TMR(tcobase)); + + if ((val & 0x3f) != tmrval) + ret = -EINVAL; + spin_unlock_irqrestore(&tco_lock, flags); + + if (ret) + return ret; + + heartbeat = t; + return 0; +} + +/* + * /dev/watchdog handling + */ + +static int nv_tco_open(struct inode *inode, struct file *file) +{ + /* /dev/watchdog can only be opened once */ + if (test_and_set_bit(0, &timer_alive)) + return -EBUSY; + + /* Reload and activate timer */ + tco_timer_keepalive(); + tco_timer_start(); + return nonseekable_open(inode, file); +} + +static int nv_tco_release(struct inode *inode, struct file *file) +{ + /* Shut off the timer */ + if (tco_expect_close == 42) { + tco_timer_stop(); + } else { + pr_crit("Unexpected close, not stopping watchdog!\n"); + tco_timer_keepalive(); + } + clear_bit(0, &timer_alive); + tco_expect_close = 0; + return 0; +} + +static ssize_t nv_tco_write(struct file *file, const char __user *data, + size_t len, loff_t *ppos) +{ + /* See if we got the magic character 'V' and reload the timer */ + if (len) { + if (!nowayout) { + size_t i; + + /* + * note: just in case someone wrote the magic character + * five months ago... + */ + tco_expect_close = 0; + + /* + * scan to see whether or not we got the magic + * character + */ + for (i = 0; i != len; i++) { + char c; + if (get_user(c, data + i)) + return -EFAULT; + if (c == 'V') + tco_expect_close = 42; + } + } + + /* someone wrote to us, we should reload the timer */ + tco_timer_keepalive(); + } + return len; +} + +static long nv_tco_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) +{ + int new_options, retval = -EINVAL; + int new_heartbeat; + void __user *argp = (void __user *)arg; + int __user *p = argp; + static const struct watchdog_info ident = { + .options = WDIOF_SETTIMEOUT | + WDIOF_KEEPALIVEPING | + WDIOF_MAGICCLOSE, + .firmware_version = 0, + .identity = TCO_MODULE_NAME, + }; + + switch (cmd) { + case WDIOC_GETSUPPORT: + return copy_to_user(argp, &ident, sizeof(ident)) ? -EFAULT : 0; + case WDIOC_GETSTATUS: + case WDIOC_GETBOOTSTATUS: + return put_user(0, p); + case WDIOC_SETOPTIONS: + if (get_user(new_options, p)) + return -EFAULT; + if (new_options & WDIOS_DISABLECARD) { + tco_timer_stop(); + retval = 0; + } + if (new_options & WDIOS_ENABLECARD) { + tco_timer_keepalive(); + tco_timer_start(); + retval = 0; + } + return retval; + case WDIOC_KEEPALIVE: + tco_timer_keepalive(); + return 0; + case WDIOC_SETTIMEOUT: + if (get_user(new_heartbeat, p)) + return -EFAULT; + if (tco_timer_set_heartbeat(new_heartbeat)) + return -EINVAL; + tco_timer_keepalive(); + /* Fall through */ + case WDIOC_GETTIMEOUT: + return put_user(heartbeat, p); + default: + return -ENOTTY; + } +} + +/* + * Kernel Interfaces + */ + +static const struct file_operations nv_tco_fops = { + .owner = THIS_MODULE, + .llseek = no_llseek, + .write = nv_tco_write, + .unlocked_ioctl = nv_tco_ioctl, + .open = nv_tco_open, + .release = nv_tco_release, +}; + +static struct miscdevice nv_tco_miscdev = { + .minor = WATCHDOG_MINOR, + .name = "watchdog", + .fops = &nv_tco_fops, +}; + +/* + * Data for PCI driver interface + * + * This data only exists for exporting the supported + * PCI ids via MODULE_DEVICE_TABLE. We do not actually + * register a pci_driver, because someone else might one day + * want to register another driver on the same PCI id. + */ +static const struct pci_device_id tco_pci_tbl[] = { + { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_SMBUS, + PCI_ANY_ID, PCI_ANY_ID, }, + { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_SMBUS, + PCI_ANY_ID, PCI_ANY_ID, }, + { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP78S_SMBUS, + PCI_ANY_ID, PCI_ANY_ID, }, + { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP79_SMBUS, + PCI_ANY_ID, PCI_ANY_ID, }, + { 0, }, /* End of list */ +}; +MODULE_DEVICE_TABLE(pci, tco_pci_tbl); + +/* + * Init & exit routines + */ + +static unsigned char nv_tco_getdevice(void) +{ + struct pci_dev *dev = NULL; + u32 val; + + /* Find the PCI device */ + for_each_pci_dev(dev) { + if (pci_match_id(tco_pci_tbl, dev) != NULL) { + tco_pci = dev; + break; + } + } + + if (!tco_pci) + return 0; + + /* Find the base io port */ + pci_read_config_dword(tco_pci, 0x64, &val); + val &= 0xffff; + if (val == 0x0001 || val == 0x0000) { + /* Something is wrong here, bar isn't setup */ + pr_err("failed to get tcobase address\n"); + return 0; + } + val &= 0xff00; + tcobase = val + 0x40; + + if (!request_region(tcobase, 0x10, "NV TCO")) { + pr_err("I/O address 0x%04x already in use\n", tcobase); + return 0; + } + + /* Set a reasonable heartbeat before we stop the timer */ + tco_timer_set_heartbeat(30); + + /* + * Stop the TCO before we change anything so we don't race with + * a zeroed timer. + */ + tco_timer_keepalive(); + tco_timer_stop(); + + /* Disable SMI caused by TCO */ + if (!request_region(MCP51_SMI_EN(tcobase), 4, "NV TCO")) { + pr_err("I/O address 0x%04x already in use\n", + MCP51_SMI_EN(tcobase)); + goto out; + } + val = inl(MCP51_SMI_EN(tcobase)); + val &= ~MCP51_SMI_EN_TCO; + outl(val, MCP51_SMI_EN(tcobase)); + val = inl(MCP51_SMI_EN(tcobase)); + release_region(MCP51_SMI_EN(tcobase), 4); + if (val & MCP51_SMI_EN_TCO) { + pr_err("Could not disable SMI caused by TCO\n"); + goto out; + } + + /* Check chipset's NO_REBOOT bit */ + pci_read_config_dword(tco_pci, MCP51_SMBUS_SETUP_B, &val); + val |= MCP51_SMBUS_SETUP_B_TCO_REBOOT; + pci_write_config_dword(tco_pci, MCP51_SMBUS_SETUP_B, val); + pci_read_config_dword(tco_pci, MCP51_SMBUS_SETUP_B, &val); + if (!(val & MCP51_SMBUS_SETUP_B_TCO_REBOOT)) { + pr_err("failed to reset NO_REBOOT flag, reboot disabled by hardware\n"); + goto out; + } + + return 1; +out: + release_region(tcobase, 0x10); + return 0; +} + +static int nv_tco_init(struct platform_device *dev) +{ + int ret; + + /* Check whether or not the hardware watchdog is there */ + if (!nv_tco_getdevice()) + return -ENODEV; + + /* Check to see if last reboot was due to watchdog timeout */ + pr_info("Watchdog reboot %sdetected\n", + inl(TCO_STS(tcobase)) & TCO_STS_TCO2TO_STS ? "" : "not "); + + /* Clear out the old status */ + outl(TCO_STS_RESET, TCO_STS(tcobase)); + + /* + * Check that the heartbeat value is within it's range. + * If not, reset to the default. + */ + if (tco_timer_set_heartbeat(heartbeat)) { + heartbeat = WATCHDOG_HEARTBEAT; + tco_timer_set_heartbeat(heartbeat); + pr_info("heartbeat value must be 2<heartbeat<39, using %d\n", + heartbeat); + } + + ret = misc_register(&nv_tco_miscdev); + if (ret != 0) { + pr_err("cannot register miscdev on minor=%d (err=%d)\n", + WATCHDOG_MINOR, ret); + goto unreg_region; + } + + clear_bit(0, &timer_alive); + + tco_timer_stop(); + + pr_info("initialized (0x%04x). heartbeat=%d sec (nowayout=%d)\n", + tcobase, heartbeat, nowayout); + + return 0; + +unreg_region: + release_region(tcobase, 0x10); + return ret; +} + +static void nv_tco_cleanup(void) +{ + u32 val; + + /* Stop the timer before we leave */ + if (!nowayout) + tco_timer_stop(); + + /* Set the NO_REBOOT bit to prevent later reboots, just for sure */ + pci_read_config_dword(tco_pci, MCP51_SMBUS_SETUP_B, &val); + val &= ~MCP51_SMBUS_SETUP_B_TCO_REBOOT; + pci_write_config_dword(tco_pci, MCP51_SMBUS_SETUP_B, val); + pci_read_config_dword(tco_pci, MCP51_SMBUS_SETUP_B, &val); + if (val & MCP51_SMBUS_SETUP_B_TCO_REBOOT) { + pr_crit("Couldn't unset REBOOT bit. Machine may soon reset\n"); + } + + /* Deregister */ + misc_deregister(&nv_tco_miscdev); + release_region(tcobase, 0x10); +} + +static int nv_tco_remove(struct platform_device *dev) +{ + if (tcobase) + nv_tco_cleanup(); + + return 0; +} + +static void nv_tco_shutdown(struct platform_device *dev) +{ + u32 val; + + tco_timer_stop(); + + /* Some BIOSes fail the POST (once) if the NO_REBOOT flag is not + * unset during shutdown. */ + pci_read_config_dword(tco_pci, MCP51_SMBUS_SETUP_B, &val); + val &= ~MCP51_SMBUS_SETUP_B_TCO_REBOOT; + pci_write_config_dword(tco_pci, MCP51_SMBUS_SETUP_B, val); +} + +static struct platform_driver nv_tco_driver = { + .probe = nv_tco_init, + .remove = nv_tco_remove, + .shutdown = nv_tco_shutdown, + .driver = { + .name = TCO_MODULE_NAME, + }, +}; + +static int __init nv_tco_init_module(void) +{ + int err; + + pr_info("NV TCO WatchDog Timer Driver v%s\n", TCO_VERSION); + + err = platform_driver_register(&nv_tco_driver); + if (err) + return err; + + nv_tco_platform_device = platform_device_register_simple( + TCO_MODULE_NAME, -1, NULL, 0); + if (IS_ERR(nv_tco_platform_device)) { + err = PTR_ERR(nv_tco_platform_device); + goto unreg_platform_driver; + } + + return 0; + +unreg_platform_driver: + platform_driver_unregister(&nv_tco_driver); + return err; +} + +static void __exit nv_tco_cleanup_module(void) +{ + platform_device_unregister(nv_tco_platform_device); + platform_driver_unregister(&nv_tco_driver); + pr_info("NV TCO Watchdog Module Unloaded\n"); +} + +module_init(nv_tco_init_module); +module_exit(nv_tco_cleanup_module); + +MODULE_AUTHOR("Mike Waychison"); +MODULE_DESCRIPTION("TCO timer driver for NV chipsets"); +MODULE_LICENSE("GPL"); diff --git a/drivers/watchdog/nv_tco.h b/drivers/watchdog/nv_tco.h new file mode 100644 index 000000000..c2d1d04e0 --- /dev/null +++ b/drivers/watchdog/nv_tco.h @@ -0,0 +1,64 @@ +/* + * nv_tco: TCO timer driver for nVidia chipsets. + * + * (c) Copyright 2005 Google Inc., All Rights Reserved. + * + * Supported Chipsets: + * - MCP51/MCP55 + * + * (c) Copyright 2000 kernel concepts <nils@kernelconcepts.de>, All Rights + * Reserved. + * http://www.kernelconcepts.de + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * Neither kernel concepts nor Nils Faerber admit liability nor provide + * warranty for any of this software. This material is provided + * "AS-IS" and at no charge. + * + * (c) Copyright 2000 kernel concepts <nils@kernelconcepts.de> + * developed for + * Jentro AG, Haar/Munich (Germany) + * + * TCO timer driver for NV chipsets + * based on softdog.c by Alan Cox <alan@redhat.com> + */ + +/* + * Some address definitions for the TCO + */ + +#define TCO_RLD(base) ((base) + 0x00) /* TCO Timer Reload and Current Value */ +#define TCO_TMR(base) ((base) + 0x01) /* TCO Timer Initial Value */ + +#define TCO_STS(base) ((base) + 0x04) /* TCO Status Register */ +/* + * TCO Boot Status bit: set on TCO reset, reset by software or standby + * power-good (survives reboots), unfortunately this bit is never + * set. + */ +# define TCO_STS_BOOT_STS (1 << 9) +/* + * first and 2nd timeout status bits, these also survive a warm boot, + * and they work, so we use them. + */ +# define TCO_STS_TCO_INT_STS (1 << 1) +# define TCO_STS_TCO2TO_STS (1 << 10) +# define TCO_STS_RESET (TCO_STS_BOOT_STS | TCO_STS_TCO2TO_STS | \ + TCO_STS_TCO_INT_STS) + +#define TCO_CNT(base) ((base) + 0x08) /* TCO Control Register */ +# define TCO_CNT_TCOHALT (1 << 12) + +#define MCP51_SMBUS_SETUP_B 0xe8 +# define MCP51_SMBUS_SETUP_B_TCO_REBOOT (1 << 25) + +/* + * The SMI_EN register is at the base io address + 0x04, + * while TCOBASE is + 0x40. + */ +#define MCP51_SMI_EN(base) ((base) - 0x40 + 0x04) +# define MCP51_SMI_EN_TCO ((1 << 4) | (1 << 5)) diff --git a/drivers/watchdog/octeon-wdt-main.c b/drivers/watchdog/octeon-wdt-main.c new file mode 100644 index 000000000..0ec419a3f --- /dev/null +++ b/drivers/watchdog/octeon-wdt-main.c @@ -0,0 +1,619 @@ +/* + * Octeon Watchdog driver + * + * Copyright (C) 2007-2017 Cavium, Inc. + * + * Converted to use WATCHDOG_CORE by Aaro Koskinen <aaro.koskinen@iki.fi>. + * + * Some parts derived from wdt.c + * + * (c) Copyright 1996-1997 Alan Cox <alan@lxorguk.ukuu.org.uk>, + * All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * Neither Alan Cox nor CymruNet Ltd. admit liability nor provide + * warranty for any of this software. This material is provided + * "AS-IS" and at no charge. + * + * (c) Copyright 1995 Alan Cox <alan@lxorguk.ukuu.org.uk> + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * + * The OCTEON watchdog has a maximum timeout of 2^32 * io_clock. + * For most systems this is less than 10 seconds, so to allow for + * software to request longer watchdog heartbeats, we maintain software + * counters to count multiples of the base rate. If the system locks + * up in such a manner that we can not run the software counters, the + * only result is a watchdog reset sooner than was requested. But + * that is OK, because in this case userspace would likely not be able + * to do anything anyhow. + * + * The hardware watchdog interval we call the period. The OCTEON + * watchdog goes through several stages, after the first period an + * irq is asserted, then if it is not reset, after the next period NMI + * is asserted, then after an additional period a chip wide soft reset. + * So for the software counters, we reset watchdog after each period + * and decrement the counter. But for the last two periods we need to + * let the watchdog progress to the NMI stage so we disable the irq + * and let it proceed. Once in the NMI, we print the register state + * to the serial port and then wait for the reset. + * + * A watchdog is maintained for each CPU in the system, that way if + * one CPU suffers a lockup, we also get a register dump and reset. + * The userspace ping resets the watchdog on all CPUs. + * + * Before userspace opens the watchdog device, we still run the + * watchdogs to catch any lockups that may be kernel related. + * + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/interrupt.h> +#include <linux/watchdog.h> +#include <linux/cpumask.h> +#include <linux/module.h> +#include <linux/delay.h> +#include <linux/cpu.h> +#include <linux/irq.h> + +#include <asm/mipsregs.h> +#include <asm/uasm.h> + +#include <asm/octeon/octeon.h> +#include <asm/octeon/cvmx-boot-vector.h> +#include <asm/octeon/cvmx-ciu2-defs.h> +#include <asm/octeon/cvmx-rst-defs.h> + +/* Watchdog interrupt major block number (8 MSBs of intsn) */ +#define WD_BLOCK_NUMBER 0x01 + +static int divisor; + +/* The count needed to achieve timeout_sec. */ +static unsigned int timeout_cnt; + +/* The maximum period supported. */ +static unsigned int max_timeout_sec; + +/* The current period. */ +static unsigned int timeout_sec; + +/* Set to non-zero when userspace countdown mode active */ +static bool do_countdown; +static unsigned int countdown_reset; +static unsigned int per_cpu_countdown[NR_CPUS]; + +static cpumask_t irq_enabled_cpus; + +#define WD_TIMO 60 /* Default heartbeat = 60 seconds */ + +#define CVMX_GSERX_SCRATCH(offset) (CVMX_ADD_IO_SEG(0x0001180090000020ull) + ((offset) & 15) * 0x1000000ull) + +static int heartbeat = WD_TIMO; +module_param(heartbeat, int, 0444); +MODULE_PARM_DESC(heartbeat, + "Watchdog heartbeat in seconds. (0 < heartbeat, default=" + __MODULE_STRING(WD_TIMO) ")"); + +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0444); +MODULE_PARM_DESC(nowayout, + "Watchdog cannot be stopped once started (default=" + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); + +static int disable; +module_param(disable, int, 0444); +MODULE_PARM_DESC(disable, + "Disable the watchdog entirely (default=0)"); + +static struct cvmx_boot_vector_element *octeon_wdt_bootvector; + +void octeon_wdt_nmi_stage2(void); + +static int cpu2core(int cpu) +{ +#ifdef CONFIG_SMP + return cpu_logical_map(cpu) & 0x3f; +#else + return cvmx_get_core_num(); +#endif +} + +/** + * Poke the watchdog when an interrupt is received + * + * @cpl: + * @dev_id: + * + * Returns + */ +static irqreturn_t octeon_wdt_poke_irq(int cpl, void *dev_id) +{ + int cpu = raw_smp_processor_id(); + unsigned int core = cpu2core(cpu); + int node = cpu_to_node(cpu); + + if (do_countdown) { + if (per_cpu_countdown[cpu] > 0) { + /* We're alive, poke the watchdog */ + cvmx_write_csr_node(node, CVMX_CIU_PP_POKEX(core), 1); + per_cpu_countdown[cpu]--; + } else { + /* Bad news, you are about to reboot. */ + disable_irq_nosync(cpl); + cpumask_clear_cpu(cpu, &irq_enabled_cpus); + } + } else { + /* Not open, just ping away... */ + cvmx_write_csr_node(node, CVMX_CIU_PP_POKEX(core), 1); + } + return IRQ_HANDLED; +} + +/* From setup.c */ +extern int prom_putchar(char c); + +/** + * Write a string to the uart + * + * @str: String to write + */ +static void octeon_wdt_write_string(const char *str) +{ + /* Just loop writing one byte at a time */ + while (*str) + prom_putchar(*str++); +} + +/** + * Write a hex number out of the uart + * + * @value: Number to display + * @digits: Number of digits to print (1 to 16) + */ +static void octeon_wdt_write_hex(u64 value, int digits) +{ + int d; + int v; + + for (d = 0; d < digits; d++) { + v = (value >> ((digits - d - 1) * 4)) & 0xf; + if (v >= 10) + prom_putchar('a' + v - 10); + else + prom_putchar('0' + v); + } +} + +static const char reg_name[][3] = { + "$0", "at", "v0", "v1", "a0", "a1", "a2", "a3", + "a4", "a5", "a6", "a7", "t0", "t1", "t2", "t3", + "s0", "s1", "s2", "s3", "s4", "s5", "s6", "s7", + "t8", "t9", "k0", "k1", "gp", "sp", "s8", "ra" +}; + +/** + * NMI stage 3 handler. NMIs are handled in the following manner: + * 1) The first NMI handler enables CVMSEG and transfers from + * the bootbus region into normal memory. It is careful to not + * destroy any registers. + * 2) The second stage handler uses CVMSEG to save the registers + * and create a stack for C code. It then calls the third level + * handler with one argument, a pointer to the register values. + * 3) The third, and final, level handler is the following C + * function that prints out some useful infomration. + * + * @reg: Pointer to register state before the NMI + */ +void octeon_wdt_nmi_stage3(u64 reg[32]) +{ + u64 i; + + unsigned int coreid = cvmx_get_core_num(); + /* + * Save status and cause early to get them before any changes + * might happen. + */ + u64 cp0_cause = read_c0_cause(); + u64 cp0_status = read_c0_status(); + u64 cp0_error_epc = read_c0_errorepc(); + u64 cp0_epc = read_c0_epc(); + + /* Delay so output from all cores output is not jumbled together. */ + udelay(85000 * coreid); + + octeon_wdt_write_string("\r\n*** NMI Watchdog interrupt on Core 0x"); + octeon_wdt_write_hex(coreid, 2); + octeon_wdt_write_string(" ***\r\n"); + for (i = 0; i < 32; i++) { + octeon_wdt_write_string("\t"); + octeon_wdt_write_string(reg_name[i]); + octeon_wdt_write_string("\t0x"); + octeon_wdt_write_hex(reg[i], 16); + if (i & 1) + octeon_wdt_write_string("\r\n"); + } + octeon_wdt_write_string("\terr_epc\t0x"); + octeon_wdt_write_hex(cp0_error_epc, 16); + + octeon_wdt_write_string("\tepc\t0x"); + octeon_wdt_write_hex(cp0_epc, 16); + octeon_wdt_write_string("\r\n"); + + octeon_wdt_write_string("\tstatus\t0x"); + octeon_wdt_write_hex(cp0_status, 16); + octeon_wdt_write_string("\tcause\t0x"); + octeon_wdt_write_hex(cp0_cause, 16); + octeon_wdt_write_string("\r\n"); + + /* The CIU register is different for each Octeon model. */ + if (OCTEON_IS_MODEL(OCTEON_CN68XX)) { + octeon_wdt_write_string("\tsrc_wd\t0x"); + octeon_wdt_write_hex(cvmx_read_csr(CVMX_CIU2_SRC_PPX_IP2_WDOG(coreid)), 16); + octeon_wdt_write_string("\ten_wd\t0x"); + octeon_wdt_write_hex(cvmx_read_csr(CVMX_CIU2_EN_PPX_IP2_WDOG(coreid)), 16); + octeon_wdt_write_string("\r\n"); + octeon_wdt_write_string("\tsrc_rml\t0x"); + octeon_wdt_write_hex(cvmx_read_csr(CVMX_CIU2_SRC_PPX_IP2_RML(coreid)), 16); + octeon_wdt_write_string("\ten_rml\t0x"); + octeon_wdt_write_hex(cvmx_read_csr(CVMX_CIU2_EN_PPX_IP2_RML(coreid)), 16); + octeon_wdt_write_string("\r\n"); + octeon_wdt_write_string("\tsum\t0x"); + octeon_wdt_write_hex(cvmx_read_csr(CVMX_CIU2_SUM_PPX_IP2(coreid)), 16); + octeon_wdt_write_string("\r\n"); + } else if (!octeon_has_feature(OCTEON_FEATURE_CIU3)) { + octeon_wdt_write_string("\tsum0\t0x"); + octeon_wdt_write_hex(cvmx_read_csr(CVMX_CIU_INTX_SUM0(coreid * 2)), 16); + octeon_wdt_write_string("\ten0\t0x"); + octeon_wdt_write_hex(cvmx_read_csr(CVMX_CIU_INTX_EN0(coreid * 2)), 16); + octeon_wdt_write_string("\r\n"); + } + + octeon_wdt_write_string("*** Chip soft reset soon ***\r\n"); + + /* + * G-30204: We must trigger a soft reset before watchdog + * does an incomplete job of doing it. + */ + if (OCTEON_IS_OCTEON3() && !OCTEON_IS_MODEL(OCTEON_CN70XX)) { + u64 scr; + unsigned int node = cvmx_get_node_num(); + unsigned int lcore = cvmx_get_local_core_num(); + union cvmx_ciu_wdogx ciu_wdog; + + /* + * Wait for other cores to print out information, but + * not too long. Do the soft reset before watchdog + * can trigger it. + */ + do { + ciu_wdog.u64 = cvmx_read_csr_node(node, CVMX_CIU_WDOGX(lcore)); + } while (ciu_wdog.s.cnt > 0x10000); + + scr = cvmx_read_csr_node(0, CVMX_GSERX_SCRATCH(0)); + scr |= 1 << 11; /* Indicate watchdog in bit 11 */ + cvmx_write_csr_node(0, CVMX_GSERX_SCRATCH(0), scr); + cvmx_write_csr_node(0, CVMX_RST_SOFT_RST, 1); + } +} + +static int octeon_wdt_cpu_to_irq(int cpu) +{ + unsigned int coreid; + int node; + int irq; + + coreid = cpu2core(cpu); + node = cpu_to_node(cpu); + + if (octeon_has_feature(OCTEON_FEATURE_CIU3)) { + struct irq_domain *domain; + int hwirq; + + domain = octeon_irq_get_block_domain(node, + WD_BLOCK_NUMBER); + hwirq = WD_BLOCK_NUMBER << 12 | 0x200 | coreid; + irq = irq_find_mapping(domain, hwirq); + } else { + irq = OCTEON_IRQ_WDOG0 + coreid; + } + return irq; +} + +static int octeon_wdt_cpu_pre_down(unsigned int cpu) +{ + unsigned int core; + int node; + union cvmx_ciu_wdogx ciu_wdog; + + core = cpu2core(cpu); + + node = cpu_to_node(cpu); + + /* Poke the watchdog to clear out its state */ + cvmx_write_csr_node(node, CVMX_CIU_PP_POKEX(core), 1); + + /* Disable the hardware. */ + ciu_wdog.u64 = 0; + cvmx_write_csr_node(node, CVMX_CIU_WDOGX(core), ciu_wdog.u64); + + free_irq(octeon_wdt_cpu_to_irq(cpu), octeon_wdt_poke_irq); + return 0; +} + +static int octeon_wdt_cpu_online(unsigned int cpu) +{ + unsigned int core; + unsigned int irq; + union cvmx_ciu_wdogx ciu_wdog; + int node; + struct irq_domain *domain; + int hwirq; + + core = cpu2core(cpu); + node = cpu_to_node(cpu); + + octeon_wdt_bootvector[core].target_ptr = (u64)octeon_wdt_nmi_stage2; + + /* Disable it before doing anything with the interrupts. */ + ciu_wdog.u64 = 0; + cvmx_write_csr_node(node, CVMX_CIU_WDOGX(core), ciu_wdog.u64); + + per_cpu_countdown[cpu] = countdown_reset; + + if (octeon_has_feature(OCTEON_FEATURE_CIU3)) { + /* Must get the domain for the watchdog block */ + domain = octeon_irq_get_block_domain(node, WD_BLOCK_NUMBER); + + /* Get a irq for the wd intsn (hardware interrupt) */ + hwirq = WD_BLOCK_NUMBER << 12 | 0x200 | core; + irq = irq_create_mapping(domain, hwirq); + irqd_set_trigger_type(irq_get_irq_data(irq), + IRQ_TYPE_EDGE_RISING); + } else + irq = OCTEON_IRQ_WDOG0 + core; + + if (request_irq(irq, octeon_wdt_poke_irq, + IRQF_NO_THREAD, "octeon_wdt", octeon_wdt_poke_irq)) + panic("octeon_wdt: Couldn't obtain irq %d", irq); + + /* Must set the irq affinity here */ + if (octeon_has_feature(OCTEON_FEATURE_CIU3)) { + cpumask_t mask; + + cpumask_clear(&mask); + cpumask_set_cpu(cpu, &mask); + irq_set_affinity(irq, &mask); + } + + cpumask_set_cpu(cpu, &irq_enabled_cpus); + + /* Poke the watchdog to clear out its state */ + cvmx_write_csr_node(node, CVMX_CIU_PP_POKEX(core), 1); + + /* Finally enable the watchdog now that all handlers are installed */ + ciu_wdog.u64 = 0; + ciu_wdog.s.len = timeout_cnt; + ciu_wdog.s.mode = 3; /* 3 = Interrupt + NMI + Soft-Reset */ + cvmx_write_csr_node(node, CVMX_CIU_WDOGX(core), ciu_wdog.u64); + + return 0; +} + +static int octeon_wdt_ping(struct watchdog_device __always_unused *wdog) +{ + int cpu; + int coreid; + int node; + + if (disable) + return 0; + + for_each_online_cpu(cpu) { + coreid = cpu2core(cpu); + node = cpu_to_node(cpu); + cvmx_write_csr_node(node, CVMX_CIU_PP_POKEX(coreid), 1); + per_cpu_countdown[cpu] = countdown_reset; + if ((countdown_reset || !do_countdown) && + !cpumask_test_cpu(cpu, &irq_enabled_cpus)) { + /* We have to enable the irq */ + enable_irq(octeon_wdt_cpu_to_irq(cpu)); + cpumask_set_cpu(cpu, &irq_enabled_cpus); + } + } + return 0; +} + +static void octeon_wdt_calc_parameters(int t) +{ + unsigned int periods; + + timeout_sec = max_timeout_sec; + + + /* + * Find the largest interrupt period, that can evenly divide + * the requested heartbeat time. + */ + while ((t % timeout_sec) != 0) + timeout_sec--; + + periods = t / timeout_sec; + + /* + * The last two periods are after the irq is disabled, and + * then to the nmi, so we subtract them off. + */ + + countdown_reset = periods > 2 ? periods - 2 : 0; + heartbeat = t; + timeout_cnt = ((octeon_get_io_clock_rate() / divisor) * timeout_sec) >> 8; +} + +static int octeon_wdt_set_timeout(struct watchdog_device *wdog, + unsigned int t) +{ + int cpu; + int coreid; + union cvmx_ciu_wdogx ciu_wdog; + int node; + + if (t <= 0) + return -1; + + octeon_wdt_calc_parameters(t); + + if (disable) + return 0; + + for_each_online_cpu(cpu) { + coreid = cpu2core(cpu); + node = cpu_to_node(cpu); + cvmx_write_csr_node(node, CVMX_CIU_PP_POKEX(coreid), 1); + ciu_wdog.u64 = 0; + ciu_wdog.s.len = timeout_cnt; + ciu_wdog.s.mode = 3; /* 3 = Interrupt + NMI + Soft-Reset */ + cvmx_write_csr_node(node, CVMX_CIU_WDOGX(coreid), ciu_wdog.u64); + cvmx_write_csr_node(node, CVMX_CIU_PP_POKEX(coreid), 1); + } + octeon_wdt_ping(wdog); /* Get the irqs back on. */ + return 0; +} + +static int octeon_wdt_start(struct watchdog_device *wdog) +{ + octeon_wdt_ping(wdog); + do_countdown = 1; + return 0; +} + +static int octeon_wdt_stop(struct watchdog_device *wdog) +{ + do_countdown = 0; + octeon_wdt_ping(wdog); + return 0; +} + +static const struct watchdog_info octeon_wdt_info = { + .options = WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE | WDIOF_KEEPALIVEPING, + .identity = "OCTEON", +}; + +static const struct watchdog_ops octeon_wdt_ops = { + .owner = THIS_MODULE, + .start = octeon_wdt_start, + .stop = octeon_wdt_stop, + .ping = octeon_wdt_ping, + .set_timeout = octeon_wdt_set_timeout, +}; + +static struct watchdog_device octeon_wdt = { + .info = &octeon_wdt_info, + .ops = &octeon_wdt_ops, +}; + +static enum cpuhp_state octeon_wdt_online; +/** + * Module/ driver initialization. + * + * Returns Zero on success + */ +static int __init octeon_wdt_init(void) +{ + int ret; + + octeon_wdt_bootvector = cvmx_boot_vector_get(); + if (!octeon_wdt_bootvector) { + pr_err("Error: Cannot allocate boot vector.\n"); + return -ENOMEM; + } + + if (OCTEON_IS_MODEL(OCTEON_CN68XX)) + divisor = 0x200; + else if (OCTEON_IS_MODEL(OCTEON_CN78XX)) + divisor = 0x400; + else + divisor = 0x100; + + /* + * Watchdog time expiration length = The 16 bits of LEN + * represent the most significant bits of a 24 bit decrementer + * that decrements every divisor cycle. + * + * Try for a timeout of 5 sec, if that fails a smaller number + * of even seconds, + */ + max_timeout_sec = 6; + do { + max_timeout_sec--; + timeout_cnt = ((octeon_get_io_clock_rate() / divisor) * max_timeout_sec) >> 8; + } while (timeout_cnt > 65535); + + BUG_ON(timeout_cnt == 0); + + octeon_wdt_calc_parameters(heartbeat); + + pr_info("Initial granularity %d Sec\n", timeout_sec); + + octeon_wdt.timeout = timeout_sec; + octeon_wdt.max_timeout = UINT_MAX; + + watchdog_set_nowayout(&octeon_wdt, nowayout); + + ret = watchdog_register_device(&octeon_wdt); + if (ret) { + pr_err("watchdog_register_device() failed: %d\n", ret); + return ret; + } + + if (disable) { + pr_notice("disabled\n"); + return 0; + } + + cpumask_clear(&irq_enabled_cpus); + + ret = cpuhp_setup_state(CPUHP_AP_ONLINE_DYN, "watchdog/octeon:online", + octeon_wdt_cpu_online, octeon_wdt_cpu_pre_down); + if (ret < 0) + goto err; + octeon_wdt_online = ret; + return 0; +err: + cvmx_write_csr(CVMX_MIO_BOOT_LOC_CFGX(0), 0); + watchdog_unregister_device(&octeon_wdt); + return ret; +} + +/** + * Module / driver shutdown + */ +static void __exit octeon_wdt_cleanup(void) +{ + watchdog_unregister_device(&octeon_wdt); + + if (disable) + return; + + cpuhp_remove_state(octeon_wdt_online); + + /* + * Disable the boot-bus memory, the code it points to is soon + * to go missing. + */ + cvmx_write_csr(CVMX_MIO_BOOT_LOC_CFGX(0), 0); +} + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Cavium Inc. <support@cavium.com>"); +MODULE_DESCRIPTION("Cavium Inc. OCTEON Watchdog driver."); +module_init(octeon_wdt_init); +module_exit(octeon_wdt_cleanup); diff --git a/drivers/watchdog/octeon-wdt-nmi.S b/drivers/watchdog/octeon-wdt-nmi.S new file mode 100644 index 000000000..97f6eb7b5 --- /dev/null +++ b/drivers/watchdog/octeon-wdt-nmi.S @@ -0,0 +1,90 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2007-2017 Cavium, Inc. + */ +#include <asm/asm.h> +#include <asm/regdef.h> + +#define CVMSEG_BASE -32768 +#define CVMSEG_SIZE 6912 +#define SAVE_REG(r) sd $r, CVMSEG_BASE + CVMSEG_SIZE - ((32 - r) * 8)($0) + + NESTED(octeon_wdt_nmi_stage2, 0, sp) + .set push + .set noreorder + .set noat + /* Clear Dcache so cvmseg works right. */ + cache 1,0($0) + /* Use K0 to do a read/modify/write of CVMMEMCTL */ + dmfc0 k0, $11, 7 + /* Clear out the size of CVMSEG */ + dins k0, $0, 0, 6 + /* Set CVMSEG to its largest value */ + ori k0, k0, 0x1c0 | 54 + /* Store the CVMMEMCTL value */ + dmtc0 k0, $11, 7 + /* + * Restore K0 from the debug scratch register, it was saved in + * the boot-vector code. + */ + dmfc0 k0, $31 + + /* + * Save all registers to the top CVMSEG. This shouldn't + * corrupt any state used by the kernel. Also all registers + * should have the value right before the NMI. + */ + SAVE_REG(0) + SAVE_REG(1) + SAVE_REG(2) + SAVE_REG(3) + SAVE_REG(4) + SAVE_REG(5) + SAVE_REG(6) + SAVE_REG(7) + SAVE_REG(8) + SAVE_REG(9) + SAVE_REG(10) + SAVE_REG(11) + SAVE_REG(12) + SAVE_REG(13) + SAVE_REG(14) + SAVE_REG(15) + SAVE_REG(16) + SAVE_REG(17) + SAVE_REG(18) + SAVE_REG(19) + SAVE_REG(20) + SAVE_REG(21) + SAVE_REG(22) + SAVE_REG(23) + SAVE_REG(24) + SAVE_REG(25) + SAVE_REG(26) + SAVE_REG(27) + SAVE_REG(28) + SAVE_REG(29) + SAVE_REG(30) + SAVE_REG(31) + /* Write zero to all CVMSEG locations per Core-15169 */ + dli a0, CVMSEG_SIZE - (33 * 8) +1: sd zero, CVMSEG_BASE(a0) + daddiu a0, a0, -8 + bgez a0, 1b + nop + /* Set the stack to begin right below the registers */ + dli sp, CVMSEG_BASE + CVMSEG_SIZE - (32 * 8) + /* Load the address of the third stage handler */ + dla $25, octeon_wdt_nmi_stage3 + /* Call the third stage handler */ + jal $25 + /* a0 is the address of the saved registers */ + move a0, sp + /* Loop forvever if we get here. */ +2: b 2b + nop + .set pop + END(octeon_wdt_nmi_stage2) diff --git a/drivers/watchdog/of_xilinx_wdt.c b/drivers/watchdog/of_xilinx_wdt.c new file mode 100644 index 000000000..d3f7eb046 --- /dev/null +++ b/drivers/watchdog/of_xilinx_wdt.c @@ -0,0 +1,320 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Watchdog Device Driver for Xilinx axi/xps_timebase_wdt + * + * (C) Copyright 2013 - 2014 Xilinx, Inc. + * (C) Copyright 2011 (Alejandro Cabrera <aldaya@gmail.com>) + */ + +#include <linux/clk.h> +#include <linux/err.h> +#include <linux/module.h> +#include <linux/types.h> +#include <linux/kernel.h> +#include <linux/ioport.h> +#include <linux/watchdog.h> +#include <linux/io.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/of_address.h> + +/* Register offsets for the Wdt device */ +#define XWT_TWCSR0_OFFSET 0x0 /* Control/Status Register0 */ +#define XWT_TWCSR1_OFFSET 0x4 /* Control/Status Register1 */ +#define XWT_TBR_OFFSET 0x8 /* Timebase Register Offset */ + +/* Control/Status Register Masks */ +#define XWT_CSR0_WRS_MASK 0x00000008 /* Reset status */ +#define XWT_CSR0_WDS_MASK 0x00000004 /* Timer state */ +#define XWT_CSR0_EWDT1_MASK 0x00000002 /* Enable bit 1 */ + +/* Control/Status Register 0/1 bits */ +#define XWT_CSRX_EWDT2_MASK 0x00000001 /* Enable bit 2 */ + +/* SelfTest constants */ +#define XWT_MAX_SELFTEST_LOOP_COUNT 0x00010000 +#define XWT_TIMER_FAILED 0xFFFFFFFF + +#define WATCHDOG_NAME "Xilinx Watchdog" + +struct xwdt_device { + void __iomem *base; + u32 wdt_interval; + spinlock_t spinlock; + struct watchdog_device xilinx_wdt_wdd; + struct clk *clk; +}; + +static int xilinx_wdt_start(struct watchdog_device *wdd) +{ + int ret; + u32 control_status_reg; + struct xwdt_device *xdev = watchdog_get_drvdata(wdd); + + ret = clk_enable(xdev->clk); + if (ret) { + dev_err(wdd->parent, "Failed to enable clock\n"); + return ret; + } + + spin_lock(&xdev->spinlock); + + /* Clean previous status and enable the watchdog timer */ + control_status_reg = ioread32(xdev->base + XWT_TWCSR0_OFFSET); + control_status_reg |= (XWT_CSR0_WRS_MASK | XWT_CSR0_WDS_MASK); + + iowrite32((control_status_reg | XWT_CSR0_EWDT1_MASK), + xdev->base + XWT_TWCSR0_OFFSET); + + iowrite32(XWT_CSRX_EWDT2_MASK, xdev->base + XWT_TWCSR1_OFFSET); + + spin_unlock(&xdev->spinlock); + + return 0; +} + +static int xilinx_wdt_stop(struct watchdog_device *wdd) +{ + u32 control_status_reg; + struct xwdt_device *xdev = watchdog_get_drvdata(wdd); + + spin_lock(&xdev->spinlock); + + control_status_reg = ioread32(xdev->base + XWT_TWCSR0_OFFSET); + + iowrite32((control_status_reg & ~XWT_CSR0_EWDT1_MASK), + xdev->base + XWT_TWCSR0_OFFSET); + + iowrite32(0, xdev->base + XWT_TWCSR1_OFFSET); + + spin_unlock(&xdev->spinlock); + + clk_disable(xdev->clk); + + pr_info("Stopped!\n"); + + return 0; +} + +static int xilinx_wdt_keepalive(struct watchdog_device *wdd) +{ + u32 control_status_reg; + struct xwdt_device *xdev = watchdog_get_drvdata(wdd); + + spin_lock(&xdev->spinlock); + + control_status_reg = ioread32(xdev->base + XWT_TWCSR0_OFFSET); + control_status_reg |= (XWT_CSR0_WRS_MASK | XWT_CSR0_WDS_MASK); + iowrite32(control_status_reg, xdev->base + XWT_TWCSR0_OFFSET); + + spin_unlock(&xdev->spinlock); + + return 0; +} + +static const struct watchdog_info xilinx_wdt_ident = { + .options = WDIOF_MAGICCLOSE | + WDIOF_KEEPALIVEPING, + .firmware_version = 1, + .identity = WATCHDOG_NAME, +}; + +static const struct watchdog_ops xilinx_wdt_ops = { + .owner = THIS_MODULE, + .start = xilinx_wdt_start, + .stop = xilinx_wdt_stop, + .ping = xilinx_wdt_keepalive, +}; + +static u32 xwdt_selftest(struct xwdt_device *xdev) +{ + int i; + u32 timer_value1; + u32 timer_value2; + + spin_lock(&xdev->spinlock); + + timer_value1 = ioread32(xdev->base + XWT_TBR_OFFSET); + timer_value2 = ioread32(xdev->base + XWT_TBR_OFFSET); + + for (i = 0; + ((i <= XWT_MAX_SELFTEST_LOOP_COUNT) && + (timer_value2 == timer_value1)); i++) { + timer_value2 = ioread32(xdev->base + XWT_TBR_OFFSET); + } + + spin_unlock(&xdev->spinlock); + + if (timer_value2 != timer_value1) + return ~XWT_TIMER_FAILED; + else + return XWT_TIMER_FAILED; +} + +static int xwdt_probe(struct platform_device *pdev) +{ + int rc; + u32 pfreq = 0, enable_once = 0; + struct resource *res; + struct xwdt_device *xdev; + struct watchdog_device *xilinx_wdt_wdd; + + xdev = devm_kzalloc(&pdev->dev, sizeof(*xdev), GFP_KERNEL); + if (!xdev) + return -ENOMEM; + + xilinx_wdt_wdd = &xdev->xilinx_wdt_wdd; + xilinx_wdt_wdd->info = &xilinx_wdt_ident; + xilinx_wdt_wdd->ops = &xilinx_wdt_ops; + xilinx_wdt_wdd->parent = &pdev->dev; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + xdev->base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(xdev->base)) + return PTR_ERR(xdev->base); + + rc = of_property_read_u32(pdev->dev.of_node, "xlnx,wdt-interval", + &xdev->wdt_interval); + if (rc) + dev_warn(&pdev->dev, + "Parameter \"xlnx,wdt-interval\" not found\n"); + + rc = of_property_read_u32(pdev->dev.of_node, "xlnx,wdt-enable-once", + &enable_once); + if (rc) + dev_warn(&pdev->dev, + "Parameter \"xlnx,wdt-enable-once\" not found\n"); + + watchdog_set_nowayout(xilinx_wdt_wdd, enable_once); + + xdev->clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(xdev->clk)) { + if (PTR_ERR(xdev->clk) != -ENOENT) + return PTR_ERR(xdev->clk); + + /* + * Clock framework support is optional, continue on + * anyways if we don't find a matching clock. + */ + xdev->clk = NULL; + + rc = of_property_read_u32(pdev->dev.of_node, "clock-frequency", + &pfreq); + if (rc) + dev_warn(&pdev->dev, + "The watchdog clock freq cannot be obtained\n"); + } else { + pfreq = clk_get_rate(xdev->clk); + } + + /* + * Twice of the 2^wdt_interval / freq because the first wdt overflow is + * ignored (interrupt), reset is only generated at second wdt overflow + */ + if (pfreq && xdev->wdt_interval) + xilinx_wdt_wdd->timeout = 2 * ((1 << xdev->wdt_interval) / + pfreq); + + spin_lock_init(&xdev->spinlock); + watchdog_set_drvdata(xilinx_wdt_wdd, xdev); + + rc = clk_prepare_enable(xdev->clk); + if (rc) { + dev_err(&pdev->dev, "unable to enable clock\n"); + return rc; + } + + rc = xwdt_selftest(xdev); + if (rc == XWT_TIMER_FAILED) { + dev_err(&pdev->dev, "SelfTest routine error\n"); + goto err_clk_disable; + } + + rc = watchdog_register_device(xilinx_wdt_wdd); + if (rc) { + dev_err(&pdev->dev, "Cannot register watchdog (err=%d)\n", rc); + goto err_clk_disable; + } + + clk_disable(xdev->clk); + + dev_info(&pdev->dev, "Xilinx Watchdog Timer at %p with timeout %ds\n", + xdev->base, xilinx_wdt_wdd->timeout); + + platform_set_drvdata(pdev, xdev); + + return 0; +err_clk_disable: + clk_disable_unprepare(xdev->clk); + + return rc; +} + +static int xwdt_remove(struct platform_device *pdev) +{ + struct xwdt_device *xdev = platform_get_drvdata(pdev); + + watchdog_unregister_device(&xdev->xilinx_wdt_wdd); + clk_disable_unprepare(xdev->clk); + + return 0; +} + +/** + * xwdt_suspend - Suspend the device. + * + * @dev: handle to the device structure. + * Return: 0 always. + */ +static int __maybe_unused xwdt_suspend(struct device *dev) +{ + struct xwdt_device *xdev = dev_get_drvdata(dev); + + if (watchdog_active(&xdev->xilinx_wdt_wdd)) + xilinx_wdt_stop(&xdev->xilinx_wdt_wdd); + + return 0; +} + +/** + * xwdt_resume - Resume the device. + * + * @dev: handle to the device structure. + * Return: 0 on success, errno otherwise. + */ +static int __maybe_unused xwdt_resume(struct device *dev) +{ + struct xwdt_device *xdev = dev_get_drvdata(dev); + int ret = 0; + + if (watchdog_active(&xdev->xilinx_wdt_wdd)) + ret = xilinx_wdt_start(&xdev->xilinx_wdt_wdd); + + return ret; +} + +static SIMPLE_DEV_PM_OPS(xwdt_pm_ops, xwdt_suspend, xwdt_resume); + +/* Match table for of_platform binding */ +static const struct of_device_id xwdt_of_match[] = { + { .compatible = "xlnx,xps-timebase-wdt-1.00.a", }, + { .compatible = "xlnx,xps-timebase-wdt-1.01.a", }, + {}, +}; +MODULE_DEVICE_TABLE(of, xwdt_of_match); + +static struct platform_driver xwdt_driver = { + .probe = xwdt_probe, + .remove = xwdt_remove, + .driver = { + .name = WATCHDOG_NAME, + .of_match_table = xwdt_of_match, + .pm = &xwdt_pm_ops, + }, +}; + +module_platform_driver(xwdt_driver); + +MODULE_AUTHOR("Alejandro Cabrera <aldaya@gmail.com>"); +MODULE_DESCRIPTION("Xilinx Watchdog driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/watchdog/omap_wdt.c b/drivers/watchdog/omap_wdt.c new file mode 100644 index 000000000..7376ba56c --- /dev/null +++ b/drivers/watchdog/omap_wdt.c @@ -0,0 +1,386 @@ +/* + * omap_wdt.c + * + * Watchdog driver for the TI OMAP 16xx & 24xx/34xx 32KHz (non-secure) watchdog + * + * Author: MontaVista Software, Inc. + * <gdavis@mvista.com> or <source@mvista.com> + * + * 2003 (c) MontaVista Software, Inc. This file is licensed under the + * terms of the GNU General Public License version 2. This program is + * licensed "as is" without any warranty of any kind, whether express + * or implied. + * + * History: + * + * 20030527: George G. Davis <gdavis@mvista.com> + * Initially based on linux-2.4.19-rmk7-pxa1/drivers/char/sa1100_wdt.c + * (c) Copyright 2000 Oleg Drokin <green@crimea.edu> + * Based on SoftDog driver by Alan Cox <alan@lxorguk.ukuu.org.uk> + * + * Copyright (c) 2004 Texas Instruments. + * 1. Modified to support OMAP1610 32-KHz watchdog timer + * 2. Ported to 2.6 kernel + * + * Copyright (c) 2005 David Brownell + * Use the driver model and standard identifiers; handle bigger timeouts. + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/module.h> +#include <linux/mod_devicetable.h> +#include <linux/types.h> +#include <linux/kernel.h> +#include <linux/mm.h> +#include <linux/watchdog.h> +#include <linux/reboot.h> +#include <linux/err.h> +#include <linux/platform_device.h> +#include <linux/moduleparam.h> +#include <linux/io.h> +#include <linux/slab.h> +#include <linux/pm_runtime.h> +#include <linux/platform_data/omap-wd-timer.h> + +#include "omap_wdt.h" + +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); +MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started " + "(default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); + +static unsigned timer_margin; +module_param(timer_margin, uint, 0); +MODULE_PARM_DESC(timer_margin, "initial watchdog timeout (in seconds)"); + +#define to_omap_wdt_dev(_wdog) container_of(_wdog, struct omap_wdt_dev, wdog) + +static bool early_enable; +module_param(early_enable, bool, 0); +MODULE_PARM_DESC(early_enable, + "Watchdog is started on module insertion (default=0)"); + +struct omap_wdt_dev { + struct watchdog_device wdog; + void __iomem *base; /* physical */ + struct device *dev; + bool omap_wdt_users; + int wdt_trgr_pattern; + struct mutex lock; /* to avoid races with PM */ +}; + +static void omap_wdt_reload(struct omap_wdt_dev *wdev) +{ + void __iomem *base = wdev->base; + + /* wait for posted write to complete */ + while ((readl_relaxed(base + OMAP_WATCHDOG_WPS)) & 0x08) + cpu_relax(); + + wdev->wdt_trgr_pattern = ~wdev->wdt_trgr_pattern; + writel_relaxed(wdev->wdt_trgr_pattern, (base + OMAP_WATCHDOG_TGR)); + + /* wait for posted write to complete */ + while ((readl_relaxed(base + OMAP_WATCHDOG_WPS)) & 0x08) + cpu_relax(); + /* reloaded WCRR from WLDR */ +} + +static void omap_wdt_enable(struct omap_wdt_dev *wdev) +{ + void __iomem *base = wdev->base; + + /* Sequence to enable the watchdog */ + writel_relaxed(0xBBBB, base + OMAP_WATCHDOG_SPR); + while ((readl_relaxed(base + OMAP_WATCHDOG_WPS)) & 0x10) + cpu_relax(); + + writel_relaxed(0x4444, base + OMAP_WATCHDOG_SPR); + while ((readl_relaxed(base + OMAP_WATCHDOG_WPS)) & 0x10) + cpu_relax(); +} + +static void omap_wdt_disable(struct omap_wdt_dev *wdev) +{ + void __iomem *base = wdev->base; + + /* sequence required to disable watchdog */ + writel_relaxed(0xAAAA, base + OMAP_WATCHDOG_SPR); /* TIMER_MODE */ + while (readl_relaxed(base + OMAP_WATCHDOG_WPS) & 0x10) + cpu_relax(); + + writel_relaxed(0x5555, base + OMAP_WATCHDOG_SPR); /* TIMER_MODE */ + while (readl_relaxed(base + OMAP_WATCHDOG_WPS) & 0x10) + cpu_relax(); +} + +static void omap_wdt_set_timer(struct omap_wdt_dev *wdev, + unsigned int timeout) +{ + u32 pre_margin = GET_WLDR_VAL(timeout); + void __iomem *base = wdev->base; + + /* just count up at 32 KHz */ + while (readl_relaxed(base + OMAP_WATCHDOG_WPS) & 0x04) + cpu_relax(); + + writel_relaxed(pre_margin, base + OMAP_WATCHDOG_LDR); + while (readl_relaxed(base + OMAP_WATCHDOG_WPS) & 0x04) + cpu_relax(); +} + +static int omap_wdt_start(struct watchdog_device *wdog) +{ + struct omap_wdt_dev *wdev = to_omap_wdt_dev(wdog); + void __iomem *base = wdev->base; + + mutex_lock(&wdev->lock); + + wdev->omap_wdt_users = true; + + pm_runtime_get_sync(wdev->dev); + + /* + * Make sure the watchdog is disabled. This is unfortunately required + * because writing to various registers with the watchdog running has no + * effect. + */ + omap_wdt_disable(wdev); + + /* initialize prescaler */ + while (readl_relaxed(base + OMAP_WATCHDOG_WPS) & 0x01) + cpu_relax(); + + writel_relaxed((1 << 5) | (PTV << 2), base + OMAP_WATCHDOG_CNTRL); + while (readl_relaxed(base + OMAP_WATCHDOG_WPS) & 0x01) + cpu_relax(); + + omap_wdt_set_timer(wdev, wdog->timeout); + omap_wdt_reload(wdev); /* trigger loading of new timeout value */ + omap_wdt_enable(wdev); + + mutex_unlock(&wdev->lock); + + return 0; +} + +static int omap_wdt_stop(struct watchdog_device *wdog) +{ + struct omap_wdt_dev *wdev = to_omap_wdt_dev(wdog); + + mutex_lock(&wdev->lock); + omap_wdt_disable(wdev); + pm_runtime_put_sync(wdev->dev); + wdev->omap_wdt_users = false; + mutex_unlock(&wdev->lock); + return 0; +} + +static int omap_wdt_ping(struct watchdog_device *wdog) +{ + struct omap_wdt_dev *wdev = to_omap_wdt_dev(wdog); + + mutex_lock(&wdev->lock); + omap_wdt_reload(wdev); + mutex_unlock(&wdev->lock); + + return 0; +} + +static int omap_wdt_set_timeout(struct watchdog_device *wdog, + unsigned int timeout) +{ + struct omap_wdt_dev *wdev = to_omap_wdt_dev(wdog); + + mutex_lock(&wdev->lock); + omap_wdt_disable(wdev); + omap_wdt_set_timer(wdev, timeout); + omap_wdt_enable(wdev); + omap_wdt_reload(wdev); + wdog->timeout = timeout; + mutex_unlock(&wdev->lock); + + return 0; +} + +static unsigned int omap_wdt_get_timeleft(struct watchdog_device *wdog) +{ + struct omap_wdt_dev *wdev = to_omap_wdt_dev(wdog); + void __iomem *base = wdev->base; + u32 value; + + value = readl_relaxed(base + OMAP_WATCHDOG_CRR); + return GET_WCCR_SECS(value); +} + +static const struct watchdog_info omap_wdt_info = { + .options = WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE | WDIOF_KEEPALIVEPING, + .identity = "OMAP Watchdog", +}; + +static const struct watchdog_ops omap_wdt_ops = { + .owner = THIS_MODULE, + .start = omap_wdt_start, + .stop = omap_wdt_stop, + .ping = omap_wdt_ping, + .set_timeout = omap_wdt_set_timeout, + .get_timeleft = omap_wdt_get_timeleft, +}; + +static int omap_wdt_probe(struct platform_device *pdev) +{ + struct omap_wd_timer_platform_data *pdata = dev_get_platdata(&pdev->dev); + struct resource *res; + struct omap_wdt_dev *wdev; + int ret; + + wdev = devm_kzalloc(&pdev->dev, sizeof(*wdev), GFP_KERNEL); + if (!wdev) + return -ENOMEM; + + wdev->omap_wdt_users = false; + wdev->dev = &pdev->dev; + wdev->wdt_trgr_pattern = 0x1234; + mutex_init(&wdev->lock); + + /* reserve static register mappings */ + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + wdev->base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(wdev->base)) + return PTR_ERR(wdev->base); + + wdev->wdog.info = &omap_wdt_info; + wdev->wdog.ops = &omap_wdt_ops; + wdev->wdog.min_timeout = TIMER_MARGIN_MIN; + wdev->wdog.max_timeout = TIMER_MARGIN_MAX; + wdev->wdog.timeout = TIMER_MARGIN_DEFAULT; + wdev->wdog.parent = &pdev->dev; + + watchdog_init_timeout(&wdev->wdog, timer_margin, &pdev->dev); + + watchdog_set_nowayout(&wdev->wdog, nowayout); + + platform_set_drvdata(pdev, wdev); + + pm_runtime_enable(wdev->dev); + pm_runtime_get_sync(wdev->dev); + + if (pdata && pdata->read_reset_sources) { + u32 rs = pdata->read_reset_sources(); + if (rs & (1 << OMAP_MPU_WD_RST_SRC_ID_SHIFT)) + wdev->wdog.bootstatus = WDIOF_CARDRESET; + } + + if (early_enable) { + omap_wdt_start(&wdev->wdog); + set_bit(WDOG_HW_RUNNING, &wdev->wdog.status); + } else { + omap_wdt_disable(wdev); + } + + ret = watchdog_register_device(&wdev->wdog); + if (ret) { + pm_runtime_disable(wdev->dev); + return ret; + } + + pr_info("OMAP Watchdog Timer Rev 0x%02x: initial timeout %d sec\n", + readl_relaxed(wdev->base + OMAP_WATCHDOG_REV) & 0xFF, + wdev->wdog.timeout); + + if (early_enable) + omap_wdt_start(&wdev->wdog); + + pm_runtime_put(wdev->dev); + + return 0; +} + +static void omap_wdt_shutdown(struct platform_device *pdev) +{ + struct omap_wdt_dev *wdev = platform_get_drvdata(pdev); + + mutex_lock(&wdev->lock); + if (wdev->omap_wdt_users) { + omap_wdt_disable(wdev); + pm_runtime_put_sync(wdev->dev); + } + mutex_unlock(&wdev->lock); +} + +static int omap_wdt_remove(struct platform_device *pdev) +{ + struct omap_wdt_dev *wdev = platform_get_drvdata(pdev); + + pm_runtime_disable(wdev->dev); + watchdog_unregister_device(&wdev->wdog); + + return 0; +} + +#ifdef CONFIG_PM + +/* REVISIT ... not clear this is the best way to handle system suspend; and + * it's very inappropriate for selective device suspend (e.g. suspending this + * through sysfs rather than by stopping the watchdog daemon). Also, this + * may not play well enough with NOWAYOUT... + */ + +static int omap_wdt_suspend(struct platform_device *pdev, pm_message_t state) +{ + struct omap_wdt_dev *wdev = platform_get_drvdata(pdev); + + mutex_lock(&wdev->lock); + if (wdev->omap_wdt_users) { + omap_wdt_disable(wdev); + pm_runtime_put_sync(wdev->dev); + } + mutex_unlock(&wdev->lock); + + return 0; +} + +static int omap_wdt_resume(struct platform_device *pdev) +{ + struct omap_wdt_dev *wdev = platform_get_drvdata(pdev); + + mutex_lock(&wdev->lock); + if (wdev->omap_wdt_users) { + pm_runtime_get_sync(wdev->dev); + omap_wdt_enable(wdev); + omap_wdt_reload(wdev); + } + mutex_unlock(&wdev->lock); + + return 0; +} + +#else +#define omap_wdt_suspend NULL +#define omap_wdt_resume NULL +#endif + +static const struct of_device_id omap_wdt_of_match[] = { + { .compatible = "ti,omap3-wdt", }, + {}, +}; +MODULE_DEVICE_TABLE(of, omap_wdt_of_match); + +static struct platform_driver omap_wdt_driver = { + .probe = omap_wdt_probe, + .remove = omap_wdt_remove, + .shutdown = omap_wdt_shutdown, + .suspend = omap_wdt_suspend, + .resume = omap_wdt_resume, + .driver = { + .name = "omap_wdt", + .of_match_table = omap_wdt_of_match, + }, +}; + +module_platform_driver(omap_wdt_driver); + +MODULE_AUTHOR("George G. Davis"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:omap_wdt"); diff --git a/drivers/watchdog/omap_wdt.h b/drivers/watchdog/omap_wdt.h new file mode 100644 index 000000000..42f31ec5e --- /dev/null +++ b/drivers/watchdog/omap_wdt.h @@ -0,0 +1,55 @@ +/* + * linux/drivers/char/watchdog/omap_wdt.h + * + * BRIEF MODULE DESCRIPTION + * OMAP Watchdog timer register definitions + * + * Copyright (C) 2004 Texas Instruments. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef _OMAP_WATCHDOG_H +#define _OMAP_WATCHDOG_H + +#define OMAP_WATCHDOG_REV (0x00) +#define OMAP_WATCHDOG_SYS_CONFIG (0x10) +#define OMAP_WATCHDOG_STATUS (0x14) +#define OMAP_WATCHDOG_CNTRL (0x24) +#define OMAP_WATCHDOG_CRR (0x28) +#define OMAP_WATCHDOG_LDR (0x2c) +#define OMAP_WATCHDOG_TGR (0x30) +#define OMAP_WATCHDOG_WPS (0x34) +#define OMAP_WATCHDOG_SPR (0x48) + +/* Using the prescaler, the OMAP watchdog could go for many + * months before firing. These limits work without scaling, + * with the 60 second default assumed by most tools and docs. + */ +#define TIMER_MARGIN_MAX (24 * 60 * 60) /* 1 day */ +#define TIMER_MARGIN_DEFAULT 60 /* 60 secs */ +#define TIMER_MARGIN_MIN 1 + +#define PTV 0 /* prescale */ +#define GET_WLDR_VAL(secs) (0xffffffff - ((secs) * (32768/(1<<PTV))) + 1) +#define GET_WCCR_SECS(val) ((0xffffffff - (val) + 1) / (32768/(1<<PTV))) + +#endif /* _OMAP_WATCHDOG_H */ diff --git a/drivers/watchdog/orion_wdt.c b/drivers/watchdog/orion_wdt.c new file mode 100644 index 000000000..9db3b09f7 --- /dev/null +++ b/drivers/watchdog/orion_wdt.c @@ -0,0 +1,657 @@ +/* + * drivers/watchdog/orion_wdt.c + * + * Watchdog driver for Orion/Kirkwood processors + * + * Author: Sylver Bruneau <sylver.bruneau@googlemail.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/types.h> +#include <linux/kernel.h> +#include <linux/platform_device.h> +#include <linux/watchdog.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/clk.h> +#include <linux/err.h> +#include <linux/of.h> +#include <linux/of_device.h> + +/* RSTOUT mask register physical address for Orion5x, Kirkwood and Dove */ +#define ORION_RSTOUT_MASK_OFFSET 0x20108 + +/* Internal registers can be configured at any 1 MiB aligned address */ +#define INTERNAL_REGS_MASK ~(SZ_1M - 1) + +/* + * Watchdog timer block registers. + */ +#define TIMER_CTRL 0x0000 +#define TIMER_A370_STATUS 0x04 + +#define WDT_MAX_CYCLE_COUNT 0xffffffff + +#define WDT_A370_RATIO_MASK(v) ((v) << 16) +#define WDT_A370_RATIO_SHIFT 5 +#define WDT_A370_RATIO (1 << WDT_A370_RATIO_SHIFT) + +#define WDT_AXP_FIXED_ENABLE_BIT BIT(10) +#define WDT_A370_EXPIRED BIT(31) + +static bool nowayout = WATCHDOG_NOWAYOUT; +static int heartbeat = -1; /* module parameter (seconds) */ + +struct orion_watchdog; + +struct orion_watchdog_data { + int wdt_counter_offset; + int wdt_enable_bit; + int rstout_enable_bit; + int rstout_mask_bit; + int (*clock_init)(struct platform_device *, + struct orion_watchdog *); + int (*enabled)(struct orion_watchdog *); + int (*start)(struct watchdog_device *); + int (*stop)(struct watchdog_device *); +}; + +struct orion_watchdog { + struct watchdog_device wdt; + void __iomem *reg; + void __iomem *rstout; + void __iomem *rstout_mask; + unsigned long clk_rate; + struct clk *clk; + const struct orion_watchdog_data *data; +}; + +static int orion_wdt_clock_init(struct platform_device *pdev, + struct orion_watchdog *dev) +{ + int ret; + + dev->clk = clk_get(&pdev->dev, NULL); + if (IS_ERR(dev->clk)) + return PTR_ERR(dev->clk); + ret = clk_prepare_enable(dev->clk); + if (ret) { + clk_put(dev->clk); + return ret; + } + + dev->clk_rate = clk_get_rate(dev->clk); + return 0; +} + +static int armada370_wdt_clock_init(struct platform_device *pdev, + struct orion_watchdog *dev) +{ + int ret; + + dev->clk = clk_get(&pdev->dev, NULL); + if (IS_ERR(dev->clk)) + return PTR_ERR(dev->clk); + ret = clk_prepare_enable(dev->clk); + if (ret) { + clk_put(dev->clk); + return ret; + } + + /* Setup watchdog input clock */ + atomic_io_modify(dev->reg + TIMER_CTRL, + WDT_A370_RATIO_MASK(WDT_A370_RATIO_SHIFT), + WDT_A370_RATIO_MASK(WDT_A370_RATIO_SHIFT)); + + dev->clk_rate = clk_get_rate(dev->clk) / WDT_A370_RATIO; + return 0; +} + +static int armada375_wdt_clock_init(struct platform_device *pdev, + struct orion_watchdog *dev) +{ + int ret; + + dev->clk = of_clk_get_by_name(pdev->dev.of_node, "fixed"); + if (!IS_ERR(dev->clk)) { + ret = clk_prepare_enable(dev->clk); + if (ret) { + clk_put(dev->clk); + return ret; + } + + atomic_io_modify(dev->reg + TIMER_CTRL, + WDT_AXP_FIXED_ENABLE_BIT, + WDT_AXP_FIXED_ENABLE_BIT); + dev->clk_rate = clk_get_rate(dev->clk); + + return 0; + } + + /* Mandatory fallback for proper devicetree backward compatibility */ + dev->clk = clk_get(&pdev->dev, NULL); + if (IS_ERR(dev->clk)) + return PTR_ERR(dev->clk); + + ret = clk_prepare_enable(dev->clk); + if (ret) { + clk_put(dev->clk); + return ret; + } + + atomic_io_modify(dev->reg + TIMER_CTRL, + WDT_A370_RATIO_MASK(WDT_A370_RATIO_SHIFT), + WDT_A370_RATIO_MASK(WDT_A370_RATIO_SHIFT)); + dev->clk_rate = clk_get_rate(dev->clk) / WDT_A370_RATIO; + + return 0; +} + +static int armadaxp_wdt_clock_init(struct platform_device *pdev, + struct orion_watchdog *dev) +{ + int ret; + + dev->clk = of_clk_get_by_name(pdev->dev.of_node, "fixed"); + if (IS_ERR(dev->clk)) + return PTR_ERR(dev->clk); + ret = clk_prepare_enable(dev->clk); + if (ret) { + clk_put(dev->clk); + return ret; + } + + /* Enable the fixed watchdog clock input */ + atomic_io_modify(dev->reg + TIMER_CTRL, + WDT_AXP_FIXED_ENABLE_BIT, + WDT_AXP_FIXED_ENABLE_BIT); + + dev->clk_rate = clk_get_rate(dev->clk); + return 0; +} + +static int orion_wdt_ping(struct watchdog_device *wdt_dev) +{ + struct orion_watchdog *dev = watchdog_get_drvdata(wdt_dev); + /* Reload watchdog duration */ + writel(dev->clk_rate * wdt_dev->timeout, + dev->reg + dev->data->wdt_counter_offset); + return 0; +} + +static int armada375_start(struct watchdog_device *wdt_dev) +{ + struct orion_watchdog *dev = watchdog_get_drvdata(wdt_dev); + u32 reg; + + /* Set watchdog duration */ + writel(dev->clk_rate * wdt_dev->timeout, + dev->reg + dev->data->wdt_counter_offset); + + /* Clear the watchdog expiration bit */ + atomic_io_modify(dev->reg + TIMER_A370_STATUS, WDT_A370_EXPIRED, 0); + + /* Enable watchdog timer */ + atomic_io_modify(dev->reg + TIMER_CTRL, dev->data->wdt_enable_bit, + dev->data->wdt_enable_bit); + + /* Enable reset on watchdog */ + reg = readl(dev->rstout); + reg |= dev->data->rstout_enable_bit; + writel(reg, dev->rstout); + + atomic_io_modify(dev->rstout_mask, dev->data->rstout_mask_bit, 0); + return 0; +} + +static int armada370_start(struct watchdog_device *wdt_dev) +{ + struct orion_watchdog *dev = watchdog_get_drvdata(wdt_dev); + u32 reg; + + /* Set watchdog duration */ + writel(dev->clk_rate * wdt_dev->timeout, + dev->reg + dev->data->wdt_counter_offset); + + /* Clear the watchdog expiration bit */ + atomic_io_modify(dev->reg + TIMER_A370_STATUS, WDT_A370_EXPIRED, 0); + + /* Enable watchdog timer */ + atomic_io_modify(dev->reg + TIMER_CTRL, dev->data->wdt_enable_bit, + dev->data->wdt_enable_bit); + + /* Enable reset on watchdog */ + reg = readl(dev->rstout); + reg |= dev->data->rstout_enable_bit; + writel(reg, dev->rstout); + return 0; +} + +static int orion_start(struct watchdog_device *wdt_dev) +{ + struct orion_watchdog *dev = watchdog_get_drvdata(wdt_dev); + + /* Set watchdog duration */ + writel(dev->clk_rate * wdt_dev->timeout, + dev->reg + dev->data->wdt_counter_offset); + + /* Enable watchdog timer */ + atomic_io_modify(dev->reg + TIMER_CTRL, dev->data->wdt_enable_bit, + dev->data->wdt_enable_bit); + + /* Enable reset on watchdog */ + atomic_io_modify(dev->rstout, dev->data->rstout_enable_bit, + dev->data->rstout_enable_bit); + + return 0; +} + +static int orion_wdt_start(struct watchdog_device *wdt_dev) +{ + struct orion_watchdog *dev = watchdog_get_drvdata(wdt_dev); + + /* There are some per-SoC quirks to handle */ + return dev->data->start(wdt_dev); +} + +static int orion_stop(struct watchdog_device *wdt_dev) +{ + struct orion_watchdog *dev = watchdog_get_drvdata(wdt_dev); + + /* Disable reset on watchdog */ + atomic_io_modify(dev->rstout, dev->data->rstout_enable_bit, 0); + + /* Disable watchdog timer */ + atomic_io_modify(dev->reg + TIMER_CTRL, dev->data->wdt_enable_bit, 0); + + return 0; +} + +static int armada375_stop(struct watchdog_device *wdt_dev) +{ + struct orion_watchdog *dev = watchdog_get_drvdata(wdt_dev); + u32 reg; + + /* Disable reset on watchdog */ + atomic_io_modify(dev->rstout_mask, dev->data->rstout_mask_bit, + dev->data->rstout_mask_bit); + reg = readl(dev->rstout); + reg &= ~dev->data->rstout_enable_bit; + writel(reg, dev->rstout); + + /* Disable watchdog timer */ + atomic_io_modify(dev->reg + TIMER_CTRL, dev->data->wdt_enable_bit, 0); + + return 0; +} + +static int armada370_stop(struct watchdog_device *wdt_dev) +{ + struct orion_watchdog *dev = watchdog_get_drvdata(wdt_dev); + u32 reg; + + /* Disable reset on watchdog */ + reg = readl(dev->rstout); + reg &= ~dev->data->rstout_enable_bit; + writel(reg, dev->rstout); + + /* Disable watchdog timer */ + atomic_io_modify(dev->reg + TIMER_CTRL, dev->data->wdt_enable_bit, 0); + + return 0; +} + +static int orion_wdt_stop(struct watchdog_device *wdt_dev) +{ + struct orion_watchdog *dev = watchdog_get_drvdata(wdt_dev); + + return dev->data->stop(wdt_dev); +} + +static int orion_enabled(struct orion_watchdog *dev) +{ + bool enabled, running; + + enabled = readl(dev->rstout) & dev->data->rstout_enable_bit; + running = readl(dev->reg + TIMER_CTRL) & dev->data->wdt_enable_bit; + + return enabled && running; +} + +static int armada375_enabled(struct orion_watchdog *dev) +{ + bool masked, enabled, running; + + masked = readl(dev->rstout_mask) & dev->data->rstout_mask_bit; + enabled = readl(dev->rstout) & dev->data->rstout_enable_bit; + running = readl(dev->reg + TIMER_CTRL) & dev->data->wdt_enable_bit; + + return !masked && enabled && running; +} + +static int orion_wdt_enabled(struct watchdog_device *wdt_dev) +{ + struct orion_watchdog *dev = watchdog_get_drvdata(wdt_dev); + + return dev->data->enabled(dev); +} + +static unsigned int orion_wdt_get_timeleft(struct watchdog_device *wdt_dev) +{ + struct orion_watchdog *dev = watchdog_get_drvdata(wdt_dev); + return readl(dev->reg + dev->data->wdt_counter_offset) / dev->clk_rate; +} + +static int orion_wdt_set_timeout(struct watchdog_device *wdt_dev, + unsigned int timeout) +{ + wdt_dev->timeout = timeout; + return 0; +} + +static const struct watchdog_info orion_wdt_info = { + .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE, + .identity = "Orion Watchdog", +}; + +static const struct watchdog_ops orion_wdt_ops = { + .owner = THIS_MODULE, + .start = orion_wdt_start, + .stop = orion_wdt_stop, + .ping = orion_wdt_ping, + .set_timeout = orion_wdt_set_timeout, + .get_timeleft = orion_wdt_get_timeleft, +}; + +static irqreturn_t orion_wdt_irq(int irq, void *devid) +{ + panic("Watchdog Timeout"); + return IRQ_HANDLED; +} + +/* + * The original devicetree binding for this driver specified only + * one memory resource, so in order to keep DT backwards compatibility + * we try to fallback to a hardcoded register address, if the resource + * is missing from the devicetree. + */ +static void __iomem *orion_wdt_ioremap_rstout(struct platform_device *pdev, + phys_addr_t internal_regs) +{ + struct resource *res; + phys_addr_t rstout; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 1); + if (res) + return devm_ioremap(&pdev->dev, res->start, + resource_size(res)); + + rstout = internal_regs + ORION_RSTOUT_MASK_OFFSET; + + WARN(1, FW_BUG "falling back to hardcoded RSTOUT reg %pa\n", &rstout); + return devm_ioremap(&pdev->dev, rstout, 0x4); +} + +static const struct orion_watchdog_data orion_data = { + .rstout_enable_bit = BIT(1), + .wdt_enable_bit = BIT(4), + .wdt_counter_offset = 0x24, + .clock_init = orion_wdt_clock_init, + .enabled = orion_enabled, + .start = orion_start, + .stop = orion_stop, +}; + +static const struct orion_watchdog_data armada370_data = { + .rstout_enable_bit = BIT(8), + .wdt_enable_bit = BIT(8), + .wdt_counter_offset = 0x34, + .clock_init = armada370_wdt_clock_init, + .enabled = orion_enabled, + .start = armada370_start, + .stop = armada370_stop, +}; + +static const struct orion_watchdog_data armadaxp_data = { + .rstout_enable_bit = BIT(8), + .wdt_enable_bit = BIT(8), + .wdt_counter_offset = 0x34, + .clock_init = armadaxp_wdt_clock_init, + .enabled = orion_enabled, + .start = armada370_start, + .stop = armada370_stop, +}; + +static const struct orion_watchdog_data armada375_data = { + .rstout_enable_bit = BIT(8), + .rstout_mask_bit = BIT(10), + .wdt_enable_bit = BIT(8), + .wdt_counter_offset = 0x34, + .clock_init = armada375_wdt_clock_init, + .enabled = armada375_enabled, + .start = armada375_start, + .stop = armada375_stop, +}; + +static const struct orion_watchdog_data armada380_data = { + .rstout_enable_bit = BIT(8), + .rstout_mask_bit = BIT(10), + .wdt_enable_bit = BIT(8), + .wdt_counter_offset = 0x34, + .clock_init = armadaxp_wdt_clock_init, + .enabled = armada375_enabled, + .start = armada375_start, + .stop = armada375_stop, +}; + +static const struct of_device_id orion_wdt_of_match_table[] = { + { + .compatible = "marvell,orion-wdt", + .data = &orion_data, + }, + { + .compatible = "marvell,armada-370-wdt", + .data = &armada370_data, + }, + { + .compatible = "marvell,armada-xp-wdt", + .data = &armadaxp_data, + }, + { + .compatible = "marvell,armada-375-wdt", + .data = &armada375_data, + }, + { + .compatible = "marvell,armada-380-wdt", + .data = &armada380_data, + }, + {}, +}; +MODULE_DEVICE_TABLE(of, orion_wdt_of_match_table); + +static int orion_wdt_get_regs(struct platform_device *pdev, + struct orion_watchdog *dev) +{ + struct device_node *node = pdev->dev.of_node; + struct resource *res; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) + return -ENODEV; + dev->reg = devm_ioremap(&pdev->dev, res->start, + resource_size(res)); + if (!dev->reg) + return -ENOMEM; + + /* Each supported compatible has some RSTOUT register quirk */ + if (of_device_is_compatible(node, "marvell,orion-wdt")) { + + dev->rstout = orion_wdt_ioremap_rstout(pdev, res->start & + INTERNAL_REGS_MASK); + if (!dev->rstout) + return -ENODEV; + + } else if (of_device_is_compatible(node, "marvell,armada-370-wdt") || + of_device_is_compatible(node, "marvell,armada-xp-wdt")) { + + /* Dedicated RSTOUT register, can be requested. */ + res = platform_get_resource(pdev, IORESOURCE_MEM, 1); + dev->rstout = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(dev->rstout)) + return PTR_ERR(dev->rstout); + + } else if (of_device_is_compatible(node, "marvell,armada-375-wdt") || + of_device_is_compatible(node, "marvell,armada-380-wdt")) { + + /* Dedicated RSTOUT register, can be requested. */ + res = platform_get_resource(pdev, IORESOURCE_MEM, 1); + dev->rstout = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(dev->rstout)) + return PTR_ERR(dev->rstout); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 2); + if (!res) + return -ENODEV; + dev->rstout_mask = devm_ioremap(&pdev->dev, res->start, + resource_size(res)); + if (!dev->rstout_mask) + return -ENOMEM; + + } else { + return -ENODEV; + } + + return 0; +} + +static int orion_wdt_probe(struct platform_device *pdev) +{ + struct orion_watchdog *dev; + const struct of_device_id *match; + unsigned int wdt_max_duration; /* (seconds) */ + int ret, irq; + + dev = devm_kzalloc(&pdev->dev, sizeof(struct orion_watchdog), + GFP_KERNEL); + if (!dev) + return -ENOMEM; + + match = of_match_device(orion_wdt_of_match_table, &pdev->dev); + if (!match) + /* Default legacy match */ + match = &orion_wdt_of_match_table[0]; + + dev->wdt.info = &orion_wdt_info; + dev->wdt.ops = &orion_wdt_ops; + dev->wdt.min_timeout = 1; + dev->data = match->data; + + ret = orion_wdt_get_regs(pdev, dev); + if (ret) + return ret; + + ret = dev->data->clock_init(pdev, dev); + if (ret) { + dev_err(&pdev->dev, "cannot initialize clock\n"); + return ret; + } + + wdt_max_duration = WDT_MAX_CYCLE_COUNT / dev->clk_rate; + + dev->wdt.timeout = wdt_max_duration; + dev->wdt.max_timeout = wdt_max_duration; + dev->wdt.parent = &pdev->dev; + watchdog_init_timeout(&dev->wdt, heartbeat, &pdev->dev); + + platform_set_drvdata(pdev, &dev->wdt); + watchdog_set_drvdata(&dev->wdt, dev); + + /* + * Let's make sure the watchdog is fully stopped, unless it's + * explicitly enabled. This may be the case if the module was + * removed and re-inserted, or if the bootloader explicitly + * set a running watchdog before booting the kernel. + */ + if (!orion_wdt_enabled(&dev->wdt)) + orion_wdt_stop(&dev->wdt); + else + set_bit(WDOG_HW_RUNNING, &dev->wdt.status); + + /* Request the IRQ only after the watchdog is disabled */ + irq = platform_get_irq(pdev, 0); + if (irq > 0) { + /* + * Not all supported platforms specify an interrupt for the + * watchdog, so let's make it optional. + */ + ret = devm_request_irq(&pdev->dev, irq, orion_wdt_irq, 0, + pdev->name, dev); + if (ret < 0) { + dev_err(&pdev->dev, "failed to request IRQ\n"); + goto disable_clk; + } + } + + watchdog_set_nowayout(&dev->wdt, nowayout); + ret = watchdog_register_device(&dev->wdt); + if (ret) + goto disable_clk; + + pr_info("Initial timeout %d sec%s\n", + dev->wdt.timeout, nowayout ? ", nowayout" : ""); + return 0; + +disable_clk: + clk_disable_unprepare(dev->clk); + clk_put(dev->clk); + return ret; +} + +static int orion_wdt_remove(struct platform_device *pdev) +{ + struct watchdog_device *wdt_dev = platform_get_drvdata(pdev); + struct orion_watchdog *dev = watchdog_get_drvdata(wdt_dev); + + watchdog_unregister_device(wdt_dev); + clk_disable_unprepare(dev->clk); + clk_put(dev->clk); + return 0; +} + +static void orion_wdt_shutdown(struct platform_device *pdev) +{ + struct watchdog_device *wdt_dev = platform_get_drvdata(pdev); + orion_wdt_stop(wdt_dev); +} + +static struct platform_driver orion_wdt_driver = { + .probe = orion_wdt_probe, + .remove = orion_wdt_remove, + .shutdown = orion_wdt_shutdown, + .driver = { + .name = "orion_wdt", + .of_match_table = orion_wdt_of_match_table, + }, +}; + +module_platform_driver(orion_wdt_driver); + +MODULE_AUTHOR("Sylver Bruneau <sylver.bruneau@googlemail.com>"); +MODULE_DESCRIPTION("Orion Processor Watchdog"); + +module_param(heartbeat, int, 0); +MODULE_PARM_DESC(heartbeat, "Initial watchdog heartbeat in seconds"); + +module_param(nowayout, bool, 0); +MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); + +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:orion_wdt"); diff --git a/drivers/watchdog/pc87413_wdt.c b/drivers/watchdog/pc87413_wdt.c new file mode 100644 index 000000000..06a892e36 --- /dev/null +++ b/drivers/watchdog/pc87413_wdt.c @@ -0,0 +1,595 @@ +/* + * NS pc87413-wdt Watchdog Timer driver for Linux 2.6.x.x + * + * This code is based on wdt.c with original copyright. + * + * (C) Copyright 2006 Sven Anders, <anders@anduras.de> + * and Marcus Junker, <junker@anduras.de> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * Neither Sven Anders, Marcus Junker nor ANDURAS AG + * admit liability nor provide warranty for any of this software. + * This material is provided "AS-IS" and at no charge. + * + * Release 1.1 + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/module.h> +#include <linux/types.h> +#include <linux/miscdevice.h> +#include <linux/watchdog.h> +#include <linux/ioport.h> +#include <linux/delay.h> +#include <linux/notifier.h> +#include <linux/fs.h> +#include <linux/reboot.h> +#include <linux/init.h> +#include <linux/spinlock.h> +#include <linux/moduleparam.h> +#include <linux/io.h> +#include <linux/uaccess.h> + + +/* #define DEBUG 1 */ + +#define DEFAULT_TIMEOUT 1 /* 1 minute */ +#define MAX_TIMEOUT 255 + +#define VERSION "1.1" +#define MODNAME "pc87413 WDT" +#define DPFX MODNAME " - DEBUG: " + +#define WDT_INDEX_IO_PORT (io+0) /* I/O port base (index register) */ +#define WDT_DATA_IO_PORT (WDT_INDEX_IO_PORT+1) +#define SWC_LDN 0x04 +#define SIOCFG2 0x22 /* Serial IO register */ +#define WDCTL 0x10 /* Watchdog-Timer-Control-Register */ +#define WDTO 0x11 /* Watchdog timeout register */ +#define WDCFG 0x12 /* Watchdog config register */ + +#define IO_DEFAULT 0x2E /* Address used on Portwell Boards */ + +static int io = IO_DEFAULT; +static int swc_base_addr = -1; + +static int timeout = DEFAULT_TIMEOUT; /* timeout value */ +static unsigned long timer_enabled; /* is the timer enabled? */ + +static char expect_close; /* is the close expected? */ + +static DEFINE_SPINLOCK(io_lock); /* to guard us from io races */ + +static bool nowayout = WATCHDOG_NOWAYOUT; + +/* -- Low level function ----------------------------------------*/ + +/* Select pins for Watchdog output */ + +static inline void pc87413_select_wdt_out(void) +{ + unsigned int cr_data = 0; + + /* Step 1: Select multiple pin,pin55,as WDT output */ + + outb_p(SIOCFG2, WDT_INDEX_IO_PORT); + + cr_data = inb(WDT_DATA_IO_PORT); + + cr_data |= 0x80; /* Set Bit7 to 1*/ + outb_p(SIOCFG2, WDT_INDEX_IO_PORT); + + outb_p(cr_data, WDT_DATA_IO_PORT); + +#ifdef DEBUG + pr_info(DPFX + "Select multiple pin,pin55,as WDT output: Bit7 to 1: %d\n", + cr_data); +#endif +} + +/* Enable SWC functions */ + +static inline void pc87413_enable_swc(void) +{ + unsigned int cr_data = 0; + + /* Step 2: Enable SWC functions */ + + outb_p(0x07, WDT_INDEX_IO_PORT); /* Point SWC_LDN (LDN=4) */ + outb_p(SWC_LDN, WDT_DATA_IO_PORT); + + outb_p(0x30, WDT_INDEX_IO_PORT); /* Read Index 0x30 First */ + cr_data = inb(WDT_DATA_IO_PORT); + cr_data |= 0x01; /* Set Bit0 to 1 */ + outb_p(0x30, WDT_INDEX_IO_PORT); + outb_p(cr_data, WDT_DATA_IO_PORT); /* Index0x30_bit0P1 */ + +#ifdef DEBUG + pr_info(DPFX "pc87413 - Enable SWC functions\n"); +#endif +} + +/* Read SWC I/O base address */ + +static void pc87413_get_swc_base_addr(void) +{ + unsigned char addr_l, addr_h = 0; + + /* Step 3: Read SWC I/O Base Address */ + + outb_p(0x60, WDT_INDEX_IO_PORT); /* Read Index 0x60 */ + addr_h = inb(WDT_DATA_IO_PORT); + + outb_p(0x61, WDT_INDEX_IO_PORT); /* Read Index 0x61 */ + + addr_l = inb(WDT_DATA_IO_PORT); + + swc_base_addr = (addr_h << 8) + addr_l; +#ifdef DEBUG + pr_info(DPFX + "Read SWC I/O Base Address: low %d, high %d, res %d\n", + addr_l, addr_h, swc_base_addr); +#endif +} + +/* Select Bank 3 of SWC */ + +static inline void pc87413_swc_bank3(void) +{ + /* Step 4: Select Bank3 of SWC */ + outb_p(inb(swc_base_addr + 0x0f) | 0x03, swc_base_addr + 0x0f); +#ifdef DEBUG + pr_info(DPFX "Select Bank3 of SWC\n"); +#endif +} + +/* Set watchdog timeout to x minutes */ + +static inline void pc87413_programm_wdto(char pc87413_time) +{ + /* Step 5: Programm WDTO, Twd. */ + outb_p(pc87413_time, swc_base_addr + WDTO); +#ifdef DEBUG + pr_info(DPFX "Set WDTO to %d minutes\n", pc87413_time); +#endif +} + +/* Enable WDEN */ + +static inline void pc87413_enable_wden(void) +{ + /* Step 6: Enable WDEN */ + outb_p(inb(swc_base_addr + WDCTL) | 0x01, swc_base_addr + WDCTL); +#ifdef DEBUG + pr_info(DPFX "Enable WDEN\n"); +#endif +} + +/* Enable SW_WD_TREN */ +static inline void pc87413_enable_sw_wd_tren(void) +{ + /* Enable SW_WD_TREN */ + outb_p(inb(swc_base_addr + WDCFG) | 0x80, swc_base_addr + WDCFG); +#ifdef DEBUG + pr_info(DPFX "Enable SW_WD_TREN\n"); +#endif +} + +/* Disable SW_WD_TREN */ + +static inline void pc87413_disable_sw_wd_tren(void) +{ + /* Disable SW_WD_TREN */ + outb_p(inb(swc_base_addr + WDCFG) & 0x7f, swc_base_addr + WDCFG); +#ifdef DEBUG + pr_info(DPFX "pc87413 - Disable SW_WD_TREN\n"); +#endif +} + +/* Enable SW_WD_TRG */ + +static inline void pc87413_enable_sw_wd_trg(void) +{ + /* Enable SW_WD_TRG */ + outb_p(inb(swc_base_addr + WDCTL) | 0x80, swc_base_addr + WDCTL); +#ifdef DEBUG + pr_info(DPFX "pc87413 - Enable SW_WD_TRG\n"); +#endif +} + +/* Disable SW_WD_TRG */ + +static inline void pc87413_disable_sw_wd_trg(void) +{ + /* Disable SW_WD_TRG */ + outb_p(inb(swc_base_addr + WDCTL) & 0x7f, swc_base_addr + WDCTL); +#ifdef DEBUG + pr_info(DPFX "Disable SW_WD_TRG\n"); +#endif +} + +/* -- Higher level functions ------------------------------------*/ + +/* Enable the watchdog */ + +static void pc87413_enable(void) +{ + spin_lock(&io_lock); + + pc87413_swc_bank3(); + pc87413_programm_wdto(timeout); + pc87413_enable_wden(); + pc87413_enable_sw_wd_tren(); + pc87413_enable_sw_wd_trg(); + + spin_unlock(&io_lock); +} + +/* Disable the watchdog */ + +static void pc87413_disable(void) +{ + spin_lock(&io_lock); + + pc87413_swc_bank3(); + pc87413_disable_sw_wd_tren(); + pc87413_disable_sw_wd_trg(); + pc87413_programm_wdto(0); + + spin_unlock(&io_lock); +} + +/* Refresh the watchdog */ + +static void pc87413_refresh(void) +{ + spin_lock(&io_lock); + + pc87413_swc_bank3(); + pc87413_disable_sw_wd_tren(); + pc87413_disable_sw_wd_trg(); + pc87413_programm_wdto(timeout); + pc87413_enable_wden(); + pc87413_enable_sw_wd_tren(); + pc87413_enable_sw_wd_trg(); + + spin_unlock(&io_lock); +} + +/* -- File operations -------------------------------------------*/ + +/** + * pc87413_open: + * @inode: inode of device + * @file: file handle to device + * + */ + +static int pc87413_open(struct inode *inode, struct file *file) +{ + /* /dev/watchdog can only be opened once */ + + if (test_and_set_bit(0, &timer_enabled)) + return -EBUSY; + + if (nowayout) + __module_get(THIS_MODULE); + + /* Reload and activate timer */ + pc87413_refresh(); + + pr_info("Watchdog enabled. Timeout set to %d minute(s).\n", timeout); + + return nonseekable_open(inode, file); +} + +/** + * pc87413_release: + * @inode: inode to board + * @file: file handle to board + * + * The watchdog has a configurable API. There is a religious dispute + * between people who want their watchdog to be able to shut down and + * those who want to be sure if the watchdog manager dies the machine + * reboots. In the former case we disable the counters, in the latter + * case you have to open it again very soon. + */ + +static int pc87413_release(struct inode *inode, struct file *file) +{ + /* Shut off the timer. */ + + if (expect_close == 42) { + pc87413_disable(); + pr_info("Watchdog disabled, sleeping again...\n"); + } else { + pr_crit("Unexpected close, not stopping watchdog!\n"); + pc87413_refresh(); + } + clear_bit(0, &timer_enabled); + expect_close = 0; + return 0; +} + +/** + * pc87413_status: + * + * return, if the watchdog is enabled (timeout is set...) + */ + + +static int pc87413_status(void) +{ + return 0; /* currently not supported */ +} + +/** + * pc87413_write: + * @file: file handle to the watchdog + * @data: data buffer to write + * @len: length in bytes + * @ppos: pointer to the position to write. No seeks allowed + * + * A write to a watchdog device is defined as a keepalive signal. Any + * write of data will do, as we we don't define content meaning. + */ + +static ssize_t pc87413_write(struct file *file, const char __user *data, + size_t len, loff_t *ppos) +{ + /* See if we got the magic character 'V' and reload the timer */ + if (len) { + if (!nowayout) { + size_t i; + + /* reset expect flag */ + expect_close = 0; + + /* scan to see whether or not we got the + magic character */ + for (i = 0; i != len; i++) { + char c; + if (get_user(c, data + i)) + return -EFAULT; + if (c == 'V') + expect_close = 42; + } + } + + /* someone wrote to us, we should reload the timer */ + pc87413_refresh(); + } + return len; +} + +/** + * pc87413_ioctl: + * @file: file handle to the device + * @cmd: watchdog command + * @arg: argument pointer + * + * The watchdog API defines a common set of functions for all watchdogs + * according to their available features. We only actually usefully support + * querying capabilities and current status. + */ + +static long pc87413_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) +{ + int new_timeout; + + union { + struct watchdog_info __user *ident; + int __user *i; + } uarg; + + static const struct watchdog_info ident = { + .options = WDIOF_KEEPALIVEPING | + WDIOF_SETTIMEOUT | + WDIOF_MAGICCLOSE, + .firmware_version = 1, + .identity = "PC87413(HF/F) watchdog", + }; + + uarg.i = (int __user *)arg; + + switch (cmd) { + case WDIOC_GETSUPPORT: + return copy_to_user(uarg.ident, &ident, + sizeof(ident)) ? -EFAULT : 0; + case WDIOC_GETSTATUS: + return put_user(pc87413_status(), uarg.i); + case WDIOC_GETBOOTSTATUS: + return put_user(0, uarg.i); + case WDIOC_SETOPTIONS: + { + int options, retval = -EINVAL; + if (get_user(options, uarg.i)) + return -EFAULT; + if (options & WDIOS_DISABLECARD) { + pc87413_disable(); + retval = 0; + } + if (options & WDIOS_ENABLECARD) { + pc87413_enable(); + retval = 0; + } + return retval; + } + case WDIOC_KEEPALIVE: + pc87413_refresh(); +#ifdef DEBUG + pr_info(DPFX "keepalive\n"); +#endif + return 0; + case WDIOC_SETTIMEOUT: + if (get_user(new_timeout, uarg.i)) + return -EFAULT; + /* the API states this is given in secs */ + new_timeout /= 60; + if (new_timeout < 0 || new_timeout > MAX_TIMEOUT) + return -EINVAL; + timeout = new_timeout; + pc87413_refresh(); + /* fall through and return the new timeout... */ + case WDIOC_GETTIMEOUT: + new_timeout = timeout * 60; + return put_user(new_timeout, uarg.i); + default: + return -ENOTTY; + } +} + +/* -- Notifier funtions -----------------------------------------*/ + +/** + * notify_sys: + * @this: our notifier block + * @code: the event being reported + * @unused: unused + * + * Our notifier is called on system shutdowns. We want to turn the card + * off at reboot otherwise the machine will reboot again during memory + * test or worse yet during the following fsck. This would suck, in fact + * trust me - if it happens it does suck. + */ + +static int pc87413_notify_sys(struct notifier_block *this, + unsigned long code, + void *unused) +{ + if (code == SYS_DOWN || code == SYS_HALT) + /* Turn the card off */ + pc87413_disable(); + return NOTIFY_DONE; +} + +/* -- Module's structures ---------------------------------------*/ + +static const struct file_operations pc87413_fops = { + .owner = THIS_MODULE, + .llseek = no_llseek, + .write = pc87413_write, + .unlocked_ioctl = pc87413_ioctl, + .open = pc87413_open, + .release = pc87413_release, +}; + +static struct notifier_block pc87413_notifier = { + .notifier_call = pc87413_notify_sys, +}; + +static struct miscdevice pc87413_miscdev = { + .minor = WATCHDOG_MINOR, + .name = "watchdog", + .fops = &pc87413_fops, +}; + +/* -- Module init functions -------------------------------------*/ + +/** + * pc87413_init: module's "constructor" + * + * Set up the WDT watchdog board. All we have to do is grab the + * resources we require and bitch if anyone beat us to them. + * The open() function will actually kick the board off. + */ + +static int __init pc87413_init(void) +{ + int ret; + + pr_info("Version " VERSION " at io 0x%X\n", + WDT_INDEX_IO_PORT); + + if (!request_muxed_region(io, 2, MODNAME)) + return -EBUSY; + + ret = register_reboot_notifier(&pc87413_notifier); + if (ret != 0) + pr_err("cannot register reboot notifier (err=%d)\n", ret); + + ret = misc_register(&pc87413_miscdev); + if (ret != 0) { + pr_err("cannot register miscdev on minor=%d (err=%d)\n", + WATCHDOG_MINOR, ret); + goto reboot_unreg; + } + pr_info("initialized. timeout=%d min\n", timeout); + + pc87413_select_wdt_out(); + pc87413_enable_swc(); + pc87413_get_swc_base_addr(); + + if (!request_region(swc_base_addr, 0x20, MODNAME)) { + pr_err("cannot request SWC region at 0x%x\n", swc_base_addr); + ret = -EBUSY; + goto misc_unreg; + } + + pc87413_enable(); + + release_region(io, 2); + return 0; + +misc_unreg: + misc_deregister(&pc87413_miscdev); +reboot_unreg: + unregister_reboot_notifier(&pc87413_notifier); + release_region(io, 2); + return ret; +} + +/** + * pc87413_exit: module's "destructor" + * + * Unload the watchdog. You cannot do this with any file handles open. + * If your watchdog is set to continue ticking on close and you unload + * it, well it keeps ticking. We won't get the interrupt but the board + * will not touch PC memory so all is fine. You just have to load a new + * module in 60 seconds or reboot. + */ + +static void __exit pc87413_exit(void) +{ + /* Stop the timer before we leave */ + if (!nowayout) { + pc87413_disable(); + pr_info("Watchdog disabled\n"); + } + + misc_deregister(&pc87413_miscdev); + unregister_reboot_notifier(&pc87413_notifier); + release_region(swc_base_addr, 0x20); + + pr_info("watchdog component driver removed\n"); +} + +module_init(pc87413_init); +module_exit(pc87413_exit); + +MODULE_AUTHOR("Sven Anders <anders@anduras.de>"); +MODULE_AUTHOR("Marcus Junker <junker@anduras.de>"); +MODULE_DESCRIPTION("PC87413 WDT driver"); +MODULE_LICENSE("GPL"); + +module_param_hw(io, int, ioport, 0); +MODULE_PARM_DESC(io, MODNAME " I/O port (default: " + __MODULE_STRING(IO_DEFAULT) ")."); + +module_param(timeout, int, 0); +MODULE_PARM_DESC(timeout, + "Watchdog timeout in minutes (default=" + __MODULE_STRING(DEFAULT_TIMEOUT) ")."); + +module_param(nowayout, bool, 0); +MODULE_PARM_DESC(nowayout, + "Watchdog cannot be stopped once started (default=" + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); + diff --git a/drivers/watchdog/pcwd.c b/drivers/watchdog/pcwd.c new file mode 100644 index 000000000..b72ce68ea --- /dev/null +++ b/drivers/watchdog/pcwd.c @@ -0,0 +1,1001 @@ +/* + * PC Watchdog Driver + * by Ken Hollis (khollis@bitgate.com) + * + * Permission granted from Simon Machell (smachell@berkprod.com) + * Written for the Linux Kernel, and GPLed by Ken Hollis + * + * 960107 Added request_region routines, modulized the whole thing. + * 960108 Fixed end-of-file pointer (Thanks to Dan Hollis), added + * WD_TIMEOUT define. + * 960216 Added eof marker on the file, and changed verbose messages. + * 960716 Made functional and cosmetic changes to the source for + * inclusion in Linux 2.0.x kernels, thanks to Alan Cox. + * 960717 Removed read/seek routines, replaced with ioctl. Also, added + * check_region command due to Alan's suggestion. + * 960821 Made changes to compile in newer 2.0.x kernels. Added + * "cold reboot sense" entry. + * 960825 Made a few changes to code, deleted some defines and made + * typedefs to replace them. Made heartbeat reset only available + * via ioctl, and removed the write routine. + * 960828 Added new items for PC Watchdog Rev.C card. + * 960829 Changed around all of the IOCTLs, added new features, + * added watchdog disable/re-enable routines. Added firmware + * version reporting. Added read routine for temperature. + * Removed some extra defines, added an autodetect Revision + * routine. + * 961006 Revised some documentation, fixed some cosmetic bugs. Made + * drivers to panic the system if it's overheating at bootup. + * 961118 Changed some verbiage on some of the output, tidied up + * code bits, and added compatibility to 2.1.x. + * 970912 Enabled board on open and disable on close. + * 971107 Took account of recent VFS changes (broke read). + * 971210 Disable board on initialisation in case board already ticking. + * 971222 Changed open/close for temperature handling + * Michael Meskes <meskes@debian.org>. + * 980112 Used minor numbers from include/linux/miscdevice.h + * 990403 Clear reset status after reading control status register in + * pcwd_showprevstate(). [Marc Boucher <marc@mbsi.ca>] + * 990605 Made changes to code to support Firmware 1.22a, added + * fairly useless proc entry. + * 990610 removed said useless proc code for the merge <alan> + * 000403 Removed last traces of proc code. <davej> + * 011214 Added nowayout module option to override + * CONFIG_WATCHDOG_NOWAYOUT <Matt_Domsch@dell.com> + * Added timeout module option to override default + */ + +/* + * A bells and whistles driver is available from http://www.pcwd.de/ + * More info available at http://www.berkprod.com/ or + * http://www.pcwatchdog.com/ + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/module.h> /* For module specific items */ +#include <linux/moduleparam.h> /* For new moduleparam's */ +#include <linux/types.h> /* For standard types (like size_t) */ +#include <linux/errno.h> /* For the -ENODEV/... values */ +#include <linux/kernel.h> /* For printk/panic/... */ +#include <linux/delay.h> /* For mdelay function */ +#include <linux/timer.h> /* For timer related operations */ +#include <linux/jiffies.h> /* For jiffies stuff */ +#include <linux/miscdevice.h> /* For struct miscdevice */ +#include <linux/watchdog.h> /* For the watchdog specific items */ +#include <linux/reboot.h> /* For kernel_power_off() */ +#include <linux/init.h> /* For __init/__exit/... */ +#include <linux/fs.h> /* For file operations */ +#include <linux/isa.h> /* For isa devices */ +#include <linux/ioport.h> /* For io-port access */ +#include <linux/spinlock.h> /* For spin_lock/spin_unlock/... */ +#include <linux/uaccess.h> /* For copy_to_user/put_user/... */ +#include <linux/io.h> /* For inb/outb/... */ + +/* Module and version information */ +#define WATCHDOG_VERSION "1.20" +#define WATCHDOG_DATE "18 Feb 2007" +#define WATCHDOG_DRIVER_NAME "ISA-PC Watchdog" +#define WATCHDOG_NAME "pcwd" +#define DRIVER_VERSION WATCHDOG_DRIVER_NAME " driver, v" WATCHDOG_VERSION "\n" + +/* + * It should be noted that PCWD_REVISION_B was removed because A and B + * are essentially the same types of card, with the exception that B + * has temperature reporting. Since I didn't receive a Rev.B card, + * the Rev.B card is not supported. (It's a good thing too, as they + * are no longer in production.) + */ +#define PCWD_REVISION_A 1 +#define PCWD_REVISION_C 2 + +/* + * These are the auto-probe addresses available. + * + * Revision A only uses ports 0x270 and 0x370. Revision C introduced 0x350. + * Revision A has an address range of 2 addresses, while Revision C has 4. + */ +#define PCWD_ISA_NR_CARDS 3 +static int pcwd_ioports[] = { 0x270, 0x350, 0x370, 0x000 }; + +/* + * These are the defines that describe the control status bits for the + * PCI-PC Watchdog card. +*/ +/* Port 1 : Control Status #1 for the PC Watchdog card, revision A. */ +#define WD_WDRST 0x01 /* Previously reset state */ +#define WD_T110 0x02 /* Temperature overheat sense */ +#define WD_HRTBT 0x04 /* Heartbeat sense */ +#define WD_RLY2 0x08 /* External relay triggered */ +#define WD_SRLY2 0x80 /* Software external relay triggered */ +/* Port 1 : Control Status #1 for the PC Watchdog card, revision C. */ +#define WD_REVC_WTRP 0x01 /* Watchdog Trip status */ +#define WD_REVC_HRBT 0x02 /* Watchdog Heartbeat */ +#define WD_REVC_TTRP 0x04 /* Temperature Trip status */ +#define WD_REVC_RL2A 0x08 /* Relay 2 activated by + on-board processor */ +#define WD_REVC_RL1A 0x10 /* Relay 1 active */ +#define WD_REVC_R2DS 0x40 /* Relay 2 disable */ +#define WD_REVC_RLY2 0x80 /* Relay 2 activated? */ +/* Port 2 : Control Status #2 */ +#define WD_WDIS 0x10 /* Watchdog Disabled */ +#define WD_ENTP 0x20 /* Watchdog Enable Temperature Trip */ +#define WD_SSEL 0x40 /* Watchdog Switch Select + (1:SW1 <-> 0:SW2) */ +#define WD_WCMD 0x80 /* Watchdog Command Mode */ + +/* max. time we give an ISA watchdog card to process a command */ +/* 500ms for each 4 bit response (according to spec.) */ +#define ISA_COMMAND_TIMEOUT 1000 + +/* Watchdog's internal commands */ +#define CMD_ISA_IDLE 0x00 +#define CMD_ISA_VERSION_INTEGER 0x01 +#define CMD_ISA_VERSION_TENTH 0x02 +#define CMD_ISA_VERSION_HUNDRETH 0x03 +#define CMD_ISA_VERSION_MINOR 0x04 +#define CMD_ISA_SWITCH_SETTINGS 0x05 +#define CMD_ISA_RESET_PC 0x06 +#define CMD_ISA_ARM_0 0x07 +#define CMD_ISA_ARM_30 0x08 +#define CMD_ISA_ARM_60 0x09 +#define CMD_ISA_DELAY_TIME_2SECS 0x0A +#define CMD_ISA_DELAY_TIME_4SECS 0x0B +#define CMD_ISA_DELAY_TIME_8SECS 0x0C +#define CMD_ISA_RESET_RELAYS 0x0D + +/* Watchdog's Dip Switch heartbeat values */ +static const int heartbeat_tbl[] = { + 20, /* OFF-OFF-OFF = 20 Sec */ + 40, /* OFF-OFF-ON = 40 Sec */ + 60, /* OFF-ON-OFF = 1 Min */ + 300, /* OFF-ON-ON = 5 Min */ + 600, /* ON-OFF-OFF = 10 Min */ + 1800, /* ON-OFF-ON = 30 Min */ + 3600, /* ON-ON-OFF = 1 Hour */ + 7200, /* ON-ON-ON = 2 hour */ +}; + +/* + * We are using an kernel timer to do the pinging of the watchdog + * every ~500ms. We try to set the internal heartbeat of the + * watchdog to 2 ms. + */ + +#define WDT_INTERVAL (HZ/2+1) + +/* We can only use 1 card due to the /dev/watchdog restriction */ +static int cards_found; + +/* internal variables */ +static unsigned long open_allowed; +static char expect_close; +static int temp_panic; + +/* this is private data for each ISA-PC watchdog card */ +static struct { + char fw_ver_str[6]; /* The cards firmware version */ + int revision; /* The card's revision */ + int supports_temp; /* Whether or not the card has + a temperature device */ + int command_mode; /* Whether or not the card is in + command mode */ + int boot_status; /* The card's boot status */ + int io_addr; /* The cards I/O address */ + spinlock_t io_lock; /* the lock for io operations */ + struct timer_list timer; /* The timer that pings the watchdog */ + unsigned long next_heartbeat; /* the next_heartbeat for the timer */ +} pcwd_private; + +/* module parameters */ +#define QUIET 0 /* Default */ +#define VERBOSE 1 /* Verbose */ +#define DEBUG 2 /* print fancy stuff too */ +static int debug = QUIET; +module_param(debug, int, 0); +MODULE_PARM_DESC(debug, + "Debug level: 0=Quiet, 1=Verbose, 2=Debug (default=0)"); + +/* default heartbeat = delay-time from dip-switches */ +#define WATCHDOG_HEARTBEAT 0 +static int heartbeat = WATCHDOG_HEARTBEAT; +module_param(heartbeat, int, 0); +MODULE_PARM_DESC(heartbeat, "Watchdog heartbeat in seconds. " + "(2 <= heartbeat <= 7200 or 0=delay-time from dip-switches, default=" + __MODULE_STRING(WATCHDOG_HEARTBEAT) ")"); + +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); +MODULE_PARM_DESC(nowayout, + "Watchdog cannot be stopped once started (default=" + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); + +/* + * Internal functions + */ + +static int send_isa_command(int cmd) +{ + int i; + int control_status; + int port0, last_port0; /* Double read for stabilising */ + + if (debug >= DEBUG) + pr_debug("sending following data cmd=0x%02x\n", cmd); + + /* The WCMD bit must be 1 and the command is only 4 bits in size */ + control_status = (cmd & 0x0F) | WD_WCMD; + outb_p(control_status, pcwd_private.io_addr + 2); + udelay(ISA_COMMAND_TIMEOUT); + + port0 = inb_p(pcwd_private.io_addr); + for (i = 0; i < 25; ++i) { + last_port0 = port0; + port0 = inb_p(pcwd_private.io_addr); + + if (port0 == last_port0) + break; /* Data is stable */ + + udelay(250); + } + + if (debug >= DEBUG) + pr_debug("received following data for cmd=0x%02x: port0=0x%02x last_port0=0x%02x\n", + cmd, port0, last_port0); + + return port0; +} + +static int set_command_mode(void) +{ + int i, found = 0, count = 0; + + /* Set the card into command mode */ + spin_lock(&pcwd_private.io_lock); + while ((!found) && (count < 3)) { + i = send_isa_command(CMD_ISA_IDLE); + + if (i == 0x00) + found = 1; + else if (i == 0xF3) { + /* Card does not like what we've done to it */ + outb_p(0x00, pcwd_private.io_addr + 2); + udelay(1200); /* Spec says wait 1ms */ + outb_p(0x00, pcwd_private.io_addr + 2); + udelay(ISA_COMMAND_TIMEOUT); + } + count++; + } + spin_unlock(&pcwd_private.io_lock); + pcwd_private.command_mode = found; + + if (debug >= DEBUG) + pr_debug("command_mode=%d\n", pcwd_private.command_mode); + + return found; +} + +static void unset_command_mode(void) +{ + /* Set the card into normal mode */ + spin_lock(&pcwd_private.io_lock); + outb_p(0x00, pcwd_private.io_addr + 2); + udelay(ISA_COMMAND_TIMEOUT); + spin_unlock(&pcwd_private.io_lock); + + pcwd_private.command_mode = 0; + + if (debug >= DEBUG) + pr_debug("command_mode=%d\n", pcwd_private.command_mode); +} + +static inline void pcwd_check_temperature_support(void) +{ + if (inb(pcwd_private.io_addr) != 0xF0) + pcwd_private.supports_temp = 1; +} + +static inline void pcwd_get_firmware(void) +{ + int one, ten, hund, minor; + + strcpy(pcwd_private.fw_ver_str, "ERROR"); + + if (set_command_mode()) { + one = send_isa_command(CMD_ISA_VERSION_INTEGER); + ten = send_isa_command(CMD_ISA_VERSION_TENTH); + hund = send_isa_command(CMD_ISA_VERSION_HUNDRETH); + minor = send_isa_command(CMD_ISA_VERSION_MINOR); + sprintf(pcwd_private.fw_ver_str, "%c.%c%c%c", + one, ten, hund, minor); + } + unset_command_mode(); + + return; +} + +static inline int pcwd_get_option_switches(void) +{ + int option_switches = 0; + + if (set_command_mode()) { + /* Get switch settings */ + option_switches = send_isa_command(CMD_ISA_SWITCH_SETTINGS); + } + + unset_command_mode(); + return option_switches; +} + +static void pcwd_show_card_info(void) +{ + int option_switches; + + /* Get some extra info from the hardware (in command/debug/diag mode) */ + if (pcwd_private.revision == PCWD_REVISION_A) + pr_info("ISA-PC Watchdog (REV.A) detected at port 0x%04x\n", + pcwd_private.io_addr); + else if (pcwd_private.revision == PCWD_REVISION_C) { + pcwd_get_firmware(); + pr_info("ISA-PC Watchdog (REV.C) detected at port 0x%04x (Firmware version: %s)\n", + pcwd_private.io_addr, pcwd_private.fw_ver_str); + option_switches = pcwd_get_option_switches(); + pr_info("Option switches (0x%02x): Temperature Reset Enable=%s, Power On Delay=%s\n", + option_switches, + ((option_switches & 0x10) ? "ON" : "OFF"), + ((option_switches & 0x08) ? "ON" : "OFF")); + + /* Reprogram internal heartbeat to 2 seconds */ + if (set_command_mode()) { + send_isa_command(CMD_ISA_DELAY_TIME_2SECS); + unset_command_mode(); + } + } + + if (pcwd_private.supports_temp) + pr_info("Temperature Option Detected\n"); + + if (pcwd_private.boot_status & WDIOF_CARDRESET) + pr_info("Previous reboot was caused by the card\n"); + + if (pcwd_private.boot_status & WDIOF_OVERHEAT) { + pr_emerg("Card senses a CPU Overheat. Panicking!\n"); + pr_emerg("CPU Overheat\n"); + } + + if (pcwd_private.boot_status == 0) + pr_info("No previous trip detected - Cold boot or reset\n"); +} + +static void pcwd_timer_ping(struct timer_list *unused) +{ + int wdrst_stat; + + /* If we got a heartbeat pulse within the WDT_INTERVAL + * we agree to ping the WDT */ + if (time_before(jiffies, pcwd_private.next_heartbeat)) { + /* Ping the watchdog */ + spin_lock(&pcwd_private.io_lock); + if (pcwd_private.revision == PCWD_REVISION_A) { + /* Rev A cards are reset by setting the + WD_WDRST bit in register 1 */ + wdrst_stat = inb_p(pcwd_private.io_addr); + wdrst_stat &= 0x0F; + wdrst_stat |= WD_WDRST; + + outb_p(wdrst_stat, pcwd_private.io_addr + 1); + } else { + /* Re-trigger watchdog by writing to port 0 */ + outb_p(0x00, pcwd_private.io_addr); + } + + /* Re-set the timer interval */ + mod_timer(&pcwd_private.timer, jiffies + WDT_INTERVAL); + + spin_unlock(&pcwd_private.io_lock); + } else { + pr_warn("Heartbeat lost! Will not ping the watchdog\n"); + } +} + +static int pcwd_start(void) +{ + int stat_reg; + + pcwd_private.next_heartbeat = jiffies + (heartbeat * HZ); + + /* Start the timer */ + mod_timer(&pcwd_private.timer, jiffies + WDT_INTERVAL); + + /* Enable the port */ + if (pcwd_private.revision == PCWD_REVISION_C) { + spin_lock(&pcwd_private.io_lock); + outb_p(0x00, pcwd_private.io_addr + 3); + udelay(ISA_COMMAND_TIMEOUT); + stat_reg = inb_p(pcwd_private.io_addr + 2); + spin_unlock(&pcwd_private.io_lock); + if (stat_reg & WD_WDIS) { + pr_info("Could not start watchdog\n"); + return -EIO; + } + } + + if (debug >= VERBOSE) + pr_debug("Watchdog started\n"); + + return 0; +} + +static int pcwd_stop(void) +{ + int stat_reg; + + /* Stop the timer */ + del_timer(&pcwd_private.timer); + + /* Disable the board */ + if (pcwd_private.revision == PCWD_REVISION_C) { + spin_lock(&pcwd_private.io_lock); + outb_p(0xA5, pcwd_private.io_addr + 3); + udelay(ISA_COMMAND_TIMEOUT); + outb_p(0xA5, pcwd_private.io_addr + 3); + udelay(ISA_COMMAND_TIMEOUT); + stat_reg = inb_p(pcwd_private.io_addr + 2); + spin_unlock(&pcwd_private.io_lock); + if ((stat_reg & WD_WDIS) == 0) { + pr_info("Could not stop watchdog\n"); + return -EIO; + } + } + + if (debug >= VERBOSE) + pr_debug("Watchdog stopped\n"); + + return 0; +} + +static int pcwd_keepalive(void) +{ + /* user land ping */ + pcwd_private.next_heartbeat = jiffies + (heartbeat * HZ); + + if (debug >= DEBUG) + pr_debug("Watchdog keepalive signal send\n"); + + return 0; +} + +static int pcwd_set_heartbeat(int t) +{ + if (t < 2 || t > 7200) /* arbitrary upper limit */ + return -EINVAL; + + heartbeat = t; + + if (debug >= VERBOSE) + pr_debug("New heartbeat: %d\n", heartbeat); + + return 0; +} + +static int pcwd_get_status(int *status) +{ + int control_status; + + *status = 0; + spin_lock(&pcwd_private.io_lock); + if (pcwd_private.revision == PCWD_REVISION_A) + /* Rev A cards return status information from + * the base register, which is used for the + * temperature in other cards. */ + control_status = inb(pcwd_private.io_addr); + else { + /* Rev C cards return card status in the base + * address + 1 register. And use different bits + * to indicate a card initiated reset, and an + * over-temperature condition. And the reboot + * status can be reset. */ + control_status = inb(pcwd_private.io_addr + 1); + } + spin_unlock(&pcwd_private.io_lock); + + if (pcwd_private.revision == PCWD_REVISION_A) { + if (control_status & WD_WDRST) + *status |= WDIOF_CARDRESET; + + if (control_status & WD_T110) { + *status |= WDIOF_OVERHEAT; + if (temp_panic) { + pr_info("Temperature overheat trip!\n"); + kernel_power_off(); + } + } + } else { + if (control_status & WD_REVC_WTRP) + *status |= WDIOF_CARDRESET; + + if (control_status & WD_REVC_TTRP) { + *status |= WDIOF_OVERHEAT; + if (temp_panic) { + pr_info("Temperature overheat trip!\n"); + kernel_power_off(); + } + } + } + + return 0; +} + +static int pcwd_clear_status(void) +{ + int control_status; + + if (pcwd_private.revision == PCWD_REVISION_C) { + spin_lock(&pcwd_private.io_lock); + + if (debug >= VERBOSE) + pr_info("clearing watchdog trip status\n"); + + control_status = inb_p(pcwd_private.io_addr + 1); + + if (debug >= DEBUG) { + pr_debug("status was: 0x%02x\n", control_status); + pr_debug("sending: 0x%02x\n", + (control_status & WD_REVC_R2DS)); + } + + /* clear reset status & Keep Relay 2 disable state as it is */ + outb_p((control_status & WD_REVC_R2DS), + pcwd_private.io_addr + 1); + + spin_unlock(&pcwd_private.io_lock); + } + return 0; +} + +static int pcwd_get_temperature(int *temperature) +{ + /* check that port 0 gives temperature info and no command results */ + if (pcwd_private.command_mode) + return -1; + + *temperature = 0; + if (!pcwd_private.supports_temp) + return -ENODEV; + + /* + * Convert celsius to fahrenheit, since this was + * the decided 'standard' for this return value. + */ + spin_lock(&pcwd_private.io_lock); + *temperature = ((inb(pcwd_private.io_addr)) * 9 / 5) + 32; + spin_unlock(&pcwd_private.io_lock); + + if (debug >= DEBUG) { + pr_debug("temperature is: %d F\n", *temperature); + } + + return 0; +} + +/* + * /dev/watchdog handling + */ + +static long pcwd_ioctl(struct file *file, unsigned int cmd, unsigned long arg) +{ + int rv; + int status; + int temperature; + int new_heartbeat; + int __user *argp = (int __user *)arg; + static const struct watchdog_info ident = { + .options = WDIOF_OVERHEAT | + WDIOF_CARDRESET | + WDIOF_KEEPALIVEPING | + WDIOF_SETTIMEOUT | + WDIOF_MAGICCLOSE, + .firmware_version = 1, + .identity = "PCWD", + }; + + switch (cmd) { + case WDIOC_GETSUPPORT: + if (copy_to_user(argp, &ident, sizeof(ident))) + return -EFAULT; + return 0; + + case WDIOC_GETSTATUS: + pcwd_get_status(&status); + return put_user(status, argp); + + case WDIOC_GETBOOTSTATUS: + return put_user(pcwd_private.boot_status, argp); + + case WDIOC_GETTEMP: + if (pcwd_get_temperature(&temperature)) + return -EFAULT; + + return put_user(temperature, argp); + + case WDIOC_SETOPTIONS: + if (pcwd_private.revision == PCWD_REVISION_C) { + if (get_user(rv, argp)) + return -EFAULT; + + if (rv & WDIOS_DISABLECARD) { + status = pcwd_stop(); + if (status < 0) + return status; + } + if (rv & WDIOS_ENABLECARD) { + status = pcwd_start(); + if (status < 0) + return status; + } + if (rv & WDIOS_TEMPPANIC) + temp_panic = 1; + } + return -EINVAL; + + case WDIOC_KEEPALIVE: + pcwd_keepalive(); + return 0; + + case WDIOC_SETTIMEOUT: + if (get_user(new_heartbeat, argp)) + return -EFAULT; + + if (pcwd_set_heartbeat(new_heartbeat)) + return -EINVAL; + + pcwd_keepalive(); + /* Fall */ + + case WDIOC_GETTIMEOUT: + return put_user(heartbeat, argp); + + default: + return -ENOTTY; + } + + return 0; +} + +static ssize_t pcwd_write(struct file *file, const char __user *buf, size_t len, + loff_t *ppos) +{ + if (len) { + if (!nowayout) { + size_t i; + + /* In case it was set long ago */ + expect_close = 0; + + for (i = 0; i != len; i++) { + char c; + + if (get_user(c, buf + i)) + return -EFAULT; + if (c == 'V') + expect_close = 42; + } + } + pcwd_keepalive(); + } + return len; +} + +static int pcwd_open(struct inode *inode, struct file *file) +{ + if (test_and_set_bit(0, &open_allowed)) + return -EBUSY; + if (nowayout) + __module_get(THIS_MODULE); + /* Activate */ + pcwd_start(); + pcwd_keepalive(); + return nonseekable_open(inode, file); +} + +static int pcwd_close(struct inode *inode, struct file *file) +{ + if (expect_close == 42) + pcwd_stop(); + else { + pr_crit("Unexpected close, not stopping watchdog!\n"); + pcwd_keepalive(); + } + expect_close = 0; + clear_bit(0, &open_allowed); + return 0; +} + +/* + * /dev/temperature handling + */ + +static ssize_t pcwd_temp_read(struct file *file, char __user *buf, size_t count, + loff_t *ppos) +{ + int temperature; + + if (pcwd_get_temperature(&temperature)) + return -EFAULT; + + if (copy_to_user(buf, &temperature, 1)) + return -EFAULT; + + return 1; +} + +static int pcwd_temp_open(struct inode *inode, struct file *file) +{ + if (!pcwd_private.supports_temp) + return -ENODEV; + + return nonseekable_open(inode, file); +} + +static int pcwd_temp_close(struct inode *inode, struct file *file) +{ + return 0; +} + +/* + * Kernel Interfaces + */ + +static const struct file_operations pcwd_fops = { + .owner = THIS_MODULE, + .llseek = no_llseek, + .write = pcwd_write, + .unlocked_ioctl = pcwd_ioctl, + .open = pcwd_open, + .release = pcwd_close, +}; + +static struct miscdevice pcwd_miscdev = { + .minor = WATCHDOG_MINOR, + .name = "watchdog", + .fops = &pcwd_fops, +}; + +static const struct file_operations pcwd_temp_fops = { + .owner = THIS_MODULE, + .llseek = no_llseek, + .read = pcwd_temp_read, + .open = pcwd_temp_open, + .release = pcwd_temp_close, +}; + +static struct miscdevice temp_miscdev = { + .minor = TEMP_MINOR, + .name = "temperature", + .fops = &pcwd_temp_fops, +}; + +/* + * Init & exit routines + */ + +static inline int get_revision(void) +{ + int r = PCWD_REVISION_C; + + spin_lock(&pcwd_private.io_lock); + /* REV A cards use only 2 io ports; test + * presumes a floating bus reads as 0xff. */ + if ((inb(pcwd_private.io_addr + 2) == 0xFF) || + (inb(pcwd_private.io_addr + 3) == 0xFF)) + r = PCWD_REVISION_A; + spin_unlock(&pcwd_private.io_lock); + + return r; +} + +/* + * The ISA cards have a heartbeat bit in one of the registers, which + * register is card dependent. The heartbeat bit is monitored, and if + * found, is considered proof that a Berkshire card has been found. + * The initial rate is once per second at board start up, then twice + * per second for normal operation. + */ +static int pcwd_isa_match(struct device *dev, unsigned int id) +{ + int base_addr = pcwd_ioports[id]; + int port0, last_port0; /* Reg 0, in case it's REV A */ + int port1, last_port1; /* Register 1 for REV C cards */ + int i; + int retval; + + if (debug >= DEBUG) + pr_debug("pcwd_isa_match id=%d\n", id); + + if (!request_region(base_addr, 4, "PCWD")) { + pr_info("Port 0x%04x unavailable\n", base_addr); + return 0; + } + + retval = 0; + + port0 = inb_p(base_addr); /* For REV A boards */ + port1 = inb_p(base_addr + 1); /* For REV C boards */ + if (port0 != 0xff || port1 != 0xff) { + /* Not an 'ff' from a floating bus, so must be a card! */ + for (i = 0; i < 4; ++i) { + + msleep(500); + + last_port0 = port0; + last_port1 = port1; + + port0 = inb_p(base_addr); + port1 = inb_p(base_addr + 1); + + /* Has either hearbeat bit changed? */ + if ((port0 ^ last_port0) & WD_HRTBT || + (port1 ^ last_port1) & WD_REVC_HRBT) { + retval = 1; + break; + } + } + } + release_region(base_addr, 4); + + return retval; +} + +static int pcwd_isa_probe(struct device *dev, unsigned int id) +{ + int ret; + + if (debug >= DEBUG) + pr_debug("pcwd_isa_probe id=%d\n", id); + + cards_found++; + if (cards_found == 1) + pr_info("v%s Ken Hollis (kenji@bitgate.com)\n", + WATCHDOG_VERSION); + + if (cards_found > 1) { + pr_err("This driver only supports 1 device\n"); + return -ENODEV; + } + + if (pcwd_ioports[id] == 0x0000) { + pr_err("No I/O-Address for card detected\n"); + return -ENODEV; + } + pcwd_private.io_addr = pcwd_ioports[id]; + + spin_lock_init(&pcwd_private.io_lock); + + /* Check card's revision */ + pcwd_private.revision = get_revision(); + + if (!request_region(pcwd_private.io_addr, + (pcwd_private.revision == PCWD_REVISION_A) ? 2 : 4, "PCWD")) { + pr_err("I/O address 0x%04x already in use\n", + pcwd_private.io_addr); + ret = -EIO; + goto error_request_region; + } + + /* Initial variables */ + pcwd_private.supports_temp = 0; + temp_panic = 0; + pcwd_private.boot_status = 0x0000; + + /* get the boot_status */ + pcwd_get_status(&pcwd_private.boot_status); + + /* clear the "card caused reboot" flag */ + pcwd_clear_status(); + + timer_setup(&pcwd_private.timer, pcwd_timer_ping, 0); + + /* Disable the board */ + pcwd_stop(); + + /* Check whether or not the card supports the temperature device */ + pcwd_check_temperature_support(); + + /* Show info about the card itself */ + pcwd_show_card_info(); + + /* If heartbeat = 0 then we use the heartbeat from the dip-switches */ + if (heartbeat == 0) + heartbeat = heartbeat_tbl[(pcwd_get_option_switches() & 0x07)]; + + /* Check that the heartbeat value is within it's range; + if not reset to the default */ + if (pcwd_set_heartbeat(heartbeat)) { + pcwd_set_heartbeat(WATCHDOG_HEARTBEAT); + pr_info("heartbeat value must be 2 <= heartbeat <= 7200, using %d\n", + WATCHDOG_HEARTBEAT); + } + + if (pcwd_private.supports_temp) { + ret = misc_register(&temp_miscdev); + if (ret) { + pr_err("cannot register miscdev on minor=%d (err=%d)\n", + TEMP_MINOR, ret); + goto error_misc_register_temp; + } + } + + ret = misc_register(&pcwd_miscdev); + if (ret) { + pr_err("cannot register miscdev on minor=%d (err=%d)\n", + WATCHDOG_MINOR, ret); + goto error_misc_register_watchdog; + } + + pr_info("initialized. heartbeat=%d sec (nowayout=%d)\n", + heartbeat, nowayout); + + return 0; + +error_misc_register_watchdog: + if (pcwd_private.supports_temp) + misc_deregister(&temp_miscdev); +error_misc_register_temp: + release_region(pcwd_private.io_addr, + (pcwd_private.revision == PCWD_REVISION_A) ? 2 : 4); +error_request_region: + pcwd_private.io_addr = 0x0000; + cards_found--; + return ret; +} + +static int pcwd_isa_remove(struct device *dev, unsigned int id) +{ + if (debug >= DEBUG) + pr_debug("pcwd_isa_remove id=%d\n", id); + + if (!pcwd_private.io_addr) + return 1; + + /* Disable the board */ + if (!nowayout) + pcwd_stop(); + + /* Deregister */ + misc_deregister(&pcwd_miscdev); + if (pcwd_private.supports_temp) + misc_deregister(&temp_miscdev); + release_region(pcwd_private.io_addr, + (pcwd_private.revision == PCWD_REVISION_A) ? 2 : 4); + pcwd_private.io_addr = 0x0000; + cards_found--; + + return 0; +} + +static void pcwd_isa_shutdown(struct device *dev, unsigned int id) +{ + if (debug >= DEBUG) + pr_debug("pcwd_isa_shutdown id=%d\n", id); + + pcwd_stop(); +} + +static struct isa_driver pcwd_isa_driver = { + .match = pcwd_isa_match, + .probe = pcwd_isa_probe, + .remove = pcwd_isa_remove, + .shutdown = pcwd_isa_shutdown, + .driver = { + .owner = THIS_MODULE, + .name = WATCHDOG_NAME, + }, +}; + +module_isa_driver(pcwd_isa_driver, PCWD_ISA_NR_CARDS); + +MODULE_AUTHOR("Ken Hollis <kenji@bitgate.com>, " + "Wim Van Sebroeck <wim@iguana.be>"); +MODULE_DESCRIPTION("Berkshire ISA-PC Watchdog driver"); +MODULE_VERSION(WATCHDOG_VERSION); +MODULE_LICENSE("GPL"); diff --git a/drivers/watchdog/pcwd_pci.c b/drivers/watchdog/pcwd_pci.c new file mode 100644 index 000000000..1f78f0908 --- /dev/null +++ b/drivers/watchdog/pcwd_pci.c @@ -0,0 +1,822 @@ +/* + * Berkshire PCI-PC Watchdog Card Driver + * + * (c) Copyright 2003-2007 Wim Van Sebroeck <wim@iguana.be>. + * + * Based on source code of the following authors: + * Ken Hollis <kenji@bitgate.com>, + * Lindsay Harris <lindsay@bluegum.com>, + * Alan Cox <alan@lxorguk.ukuu.org.uk>, + * Matt Domsch <Matt_Domsch@dell.com>, + * Rob Radez <rob@osinvestor.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * Neither Wim Van Sebroeck nor Iguana vzw. admit liability nor + * provide warranty for any of this software. This material is + * provided "AS-IS" and at no charge. + */ + +/* + * A bells and whistles driver is available from: + * http://www.kernel.org/pub/linux/kernel/people/wim/pcwd/pcwd_pci/ + * + * More info available at + * http://www.berkprod.com/ or http://www.pcwatchdog.com/ + */ + +/* + * Includes, defines, variables, module parameters, ... + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/module.h> /* For module specific items */ +#include <linux/moduleparam.h> /* For new moduleparam's */ +#include <linux/types.h> /* For standard types (like size_t) */ +#include <linux/errno.h> /* For the -ENODEV/... values */ +#include <linux/kernel.h> /* For printk/panic/... */ +#include <linux/delay.h> /* For mdelay function */ +#include <linux/miscdevice.h> /* For struct miscdevice */ +#include <linux/watchdog.h> /* For the watchdog specific items */ +#include <linux/notifier.h> /* For notifier support */ +#include <linux/reboot.h> /* For reboot_notifier stuff */ +#include <linux/init.h> /* For __init/__exit/... */ +#include <linux/fs.h> /* For file operations */ +#include <linux/pci.h> /* For pci functions */ +#include <linux/ioport.h> /* For io-port access */ +#include <linux/spinlock.h> /* For spin_lock/spin_unlock/... */ +#include <linux/uaccess.h> /* For copy_to_user/put_user/... */ +#include <linux/io.h> /* For inb/outb/... */ + +/* Module and version information */ +#define WATCHDOG_VERSION "1.03" +#define WATCHDOG_DRIVER_NAME "PCI-PC Watchdog" +#define WATCHDOG_NAME "pcwd_pci" +#define DRIVER_VERSION WATCHDOG_DRIVER_NAME " driver, v" WATCHDOG_VERSION + +/* Stuff for the PCI ID's */ +#ifndef PCI_VENDOR_ID_QUICKLOGIC +#define PCI_VENDOR_ID_QUICKLOGIC 0x11e3 +#endif + +#ifndef PCI_DEVICE_ID_WATCHDOG_PCIPCWD +#define PCI_DEVICE_ID_WATCHDOG_PCIPCWD 0x5030 +#endif + +/* + * These are the defines that describe the control status bits for the + * PCI-PC Watchdog card. + */ +/* Port 1 : Control Status #1 */ +#define WD_PCI_WTRP 0x01 /* Watchdog Trip status */ +#define WD_PCI_HRBT 0x02 /* Watchdog Heartbeat */ +#define WD_PCI_TTRP 0x04 /* Temperature Trip status */ +#define WD_PCI_RL2A 0x08 /* Relay 2 Active */ +#define WD_PCI_RL1A 0x10 /* Relay 1 Active */ +#define WD_PCI_R2DS 0x40 /* Relay 2 Disable Temperature-trip / + reset */ +#define WD_PCI_RLY2 0x80 /* Activate Relay 2 on the board */ +/* Port 2 : Control Status #2 */ +#define WD_PCI_WDIS 0x10 /* Watchdog Disable */ +#define WD_PCI_ENTP 0x20 /* Enable Temperature Trip Reset */ +#define WD_PCI_WRSP 0x40 /* Watchdog wrote response */ +#define WD_PCI_PCMD 0x80 /* PC has sent command */ + +/* according to documentation max. time to process a command for the pci + * watchdog card is 100 ms, so we give it 150 ms to do it's job */ +#define PCI_COMMAND_TIMEOUT 150 + +/* Watchdog's internal commands */ +#define CMD_GET_STATUS 0x04 +#define CMD_GET_FIRMWARE_VERSION 0x08 +#define CMD_READ_WATCHDOG_TIMEOUT 0x18 +#define CMD_WRITE_WATCHDOG_TIMEOUT 0x19 +#define CMD_GET_CLEAR_RESET_COUNT 0x84 + +/* Watchdog's Dip Switch heartbeat values */ +static const int heartbeat_tbl[] = { + 5, /* OFF-OFF-OFF = 5 Sec */ + 10, /* OFF-OFF-ON = 10 Sec */ + 30, /* OFF-ON-OFF = 30 Sec */ + 60, /* OFF-ON-ON = 1 Min */ + 300, /* ON-OFF-OFF = 5 Min */ + 600, /* ON-OFF-ON = 10 Min */ + 1800, /* ON-ON-OFF = 30 Min */ + 3600, /* ON-ON-ON = 1 hour */ +}; + +/* We can only use 1 card due to the /dev/watchdog restriction */ +static int cards_found; + +/* internal variables */ +static int temp_panic; +static unsigned long is_active; +static char expect_release; +/* this is private data for each PCI-PC watchdog card */ +static struct { + /* Wether or not the card has a temperature device */ + int supports_temp; + /* The card's boot status */ + int boot_status; + /* The cards I/O address */ + unsigned long io_addr; + /* the lock for io operations */ + spinlock_t io_lock; + /* the PCI-device */ + struct pci_dev *pdev; +} pcipcwd_private; + +/* module parameters */ +#define QUIET 0 /* Default */ +#define VERBOSE 1 /* Verbose */ +#define DEBUG 2 /* print fancy stuff too */ +static int debug = QUIET; +module_param(debug, int, 0); +MODULE_PARM_DESC(debug, "Debug level: 0=Quiet, 1=Verbose, 2=Debug (default=0)"); + +#define WATCHDOG_HEARTBEAT 0 /* default heartbeat = + delay-time from dip-switches */ +static int heartbeat = WATCHDOG_HEARTBEAT; +module_param(heartbeat, int, 0); +MODULE_PARM_DESC(heartbeat, "Watchdog heartbeat in seconds. " + "(0<heartbeat<65536 or 0=delay-time from dip-switches, default=" + __MODULE_STRING(WATCHDOG_HEARTBEAT) ")"); + +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); +MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); + +/* + * Internal functions + */ + +static int send_command(int cmd, int *msb, int *lsb) +{ + int got_response, count; + + if (debug >= DEBUG) + pr_debug("sending following data cmd=0x%02x msb=0x%02x lsb=0x%02x\n", + cmd, *msb, *lsb); + + spin_lock(&pcipcwd_private.io_lock); + /* If a command requires data it should be written first. + * Data for commands with 8 bits of data should be written to port 4. + * Commands with 16 bits of data, should be written as LSB to port 4 + * and MSB to port 5. + * After the required data has been written then write the command to + * port 6. */ + outb_p(*lsb, pcipcwd_private.io_addr + 4); + outb_p(*msb, pcipcwd_private.io_addr + 5); + outb_p(cmd, pcipcwd_private.io_addr + 6); + + /* wait till the pci card processed the command, signaled by + * the WRSP bit in port 2 and give it a max. timeout of + * PCI_COMMAND_TIMEOUT to process */ + got_response = inb_p(pcipcwd_private.io_addr + 2) & WD_PCI_WRSP; + for (count = 0; (count < PCI_COMMAND_TIMEOUT) && (!got_response); + count++) { + mdelay(1); + got_response = inb_p(pcipcwd_private.io_addr + 2) & WD_PCI_WRSP; + } + + if (debug >= DEBUG) { + if (got_response) { + pr_debug("time to process command was: %d ms\n", + count); + } else { + pr_debug("card did not respond on command!\n"); + } + } + + if (got_response) { + /* read back response */ + *lsb = inb_p(pcipcwd_private.io_addr + 4); + *msb = inb_p(pcipcwd_private.io_addr + 5); + + /* clear WRSP bit */ + inb_p(pcipcwd_private.io_addr + 6); + + if (debug >= DEBUG) + pr_debug("received following data for cmd=0x%02x: msb=0x%02x lsb=0x%02x\n", + cmd, *msb, *lsb); + } + + spin_unlock(&pcipcwd_private.io_lock); + + return got_response; +} + +static inline void pcipcwd_check_temperature_support(void) +{ + if (inb_p(pcipcwd_private.io_addr) != 0xF0) + pcipcwd_private.supports_temp = 1; +} + +static int pcipcwd_get_option_switches(void) +{ + int option_switches; + + option_switches = inb_p(pcipcwd_private.io_addr + 3); + return option_switches; +} + +static void pcipcwd_show_card_info(void) +{ + int got_fw_rev, fw_rev_major, fw_rev_minor; + char fw_ver_str[20]; /* The cards firmware version */ + int option_switches; + + got_fw_rev = send_command(CMD_GET_FIRMWARE_VERSION, &fw_rev_major, + &fw_rev_minor); + if (got_fw_rev) + sprintf(fw_ver_str, "%u.%02u", fw_rev_major, fw_rev_minor); + else + sprintf(fw_ver_str, "<card no answer>"); + + /* Get switch settings */ + option_switches = pcipcwd_get_option_switches(); + + pr_info("Found card at port 0x%04x (Firmware: %s) %s temp option\n", + (int) pcipcwd_private.io_addr, fw_ver_str, + (pcipcwd_private.supports_temp ? "with" : "without")); + + pr_info("Option switches (0x%02x): Temperature Reset Enable=%s, Power On Delay=%s\n", + option_switches, + ((option_switches & 0x10) ? "ON" : "OFF"), + ((option_switches & 0x08) ? "ON" : "OFF")); + + if (pcipcwd_private.boot_status & WDIOF_CARDRESET) + pr_info("Previous reset was caused by the Watchdog card\n"); + + if (pcipcwd_private.boot_status & WDIOF_OVERHEAT) + pr_info("Card sensed a CPU Overheat\n"); + + if (pcipcwd_private.boot_status == 0) + pr_info("No previous trip detected - Cold boot or reset\n"); +} + +static int pcipcwd_start(void) +{ + int stat_reg; + + spin_lock(&pcipcwd_private.io_lock); + outb_p(0x00, pcipcwd_private.io_addr + 3); + udelay(1000); + + stat_reg = inb_p(pcipcwd_private.io_addr + 2); + spin_unlock(&pcipcwd_private.io_lock); + + if (stat_reg & WD_PCI_WDIS) { + pr_err("Card timer not enabled\n"); + return -1; + } + + if (debug >= VERBOSE) + pr_debug("Watchdog started\n"); + + return 0; +} + +static int pcipcwd_stop(void) +{ + int stat_reg; + + spin_lock(&pcipcwd_private.io_lock); + outb_p(0xA5, pcipcwd_private.io_addr + 3); + udelay(1000); + + outb_p(0xA5, pcipcwd_private.io_addr + 3); + udelay(1000); + + stat_reg = inb_p(pcipcwd_private.io_addr + 2); + spin_unlock(&pcipcwd_private.io_lock); + + if (!(stat_reg & WD_PCI_WDIS)) { + pr_err("Card did not acknowledge disable attempt\n"); + return -1; + } + + if (debug >= VERBOSE) + pr_debug("Watchdog stopped\n"); + + return 0; +} + +static int pcipcwd_keepalive(void) +{ + /* Re-trigger watchdog by writing to port 0 */ + spin_lock(&pcipcwd_private.io_lock); + outb_p(0x42, pcipcwd_private.io_addr); /* send out any data */ + spin_unlock(&pcipcwd_private.io_lock); + + if (debug >= DEBUG) + pr_debug("Watchdog keepalive signal send\n"); + + return 0; +} + +static int pcipcwd_set_heartbeat(int t) +{ + int t_msb = t / 256; + int t_lsb = t % 256; + + if ((t < 0x0001) || (t > 0xFFFF)) + return -EINVAL; + + /* Write new heartbeat to watchdog */ + send_command(CMD_WRITE_WATCHDOG_TIMEOUT, &t_msb, &t_lsb); + + heartbeat = t; + if (debug >= VERBOSE) + pr_debug("New heartbeat: %d\n", heartbeat); + + return 0; +} + +static int pcipcwd_get_status(int *status) +{ + int control_status; + + *status = 0; + control_status = inb_p(pcipcwd_private.io_addr + 1); + if (control_status & WD_PCI_WTRP) + *status |= WDIOF_CARDRESET; + if (control_status & WD_PCI_TTRP) { + *status |= WDIOF_OVERHEAT; + if (temp_panic) + panic(KBUILD_MODNAME ": Temperature overheat trip!\n"); + } + + if (debug >= DEBUG) + pr_debug("Control Status #1: 0x%02x\n", control_status); + + return 0; +} + +static int pcipcwd_clear_status(void) +{ + int control_status; + int msb; + int reset_counter; + + if (debug >= VERBOSE) + pr_info("clearing watchdog trip status & LED\n"); + + control_status = inb_p(pcipcwd_private.io_addr + 1); + + if (debug >= DEBUG) { + pr_debug("status was: 0x%02x\n", control_status); + pr_debug("sending: 0x%02x\n", + (control_status & WD_PCI_R2DS) | WD_PCI_WTRP); + } + + /* clear trip status & LED and keep mode of relay 2 */ + outb_p((control_status & WD_PCI_R2DS) | WD_PCI_WTRP, + pcipcwd_private.io_addr + 1); + + /* clear reset counter */ + msb = 0; + reset_counter = 0xff; + send_command(CMD_GET_CLEAR_RESET_COUNT, &msb, &reset_counter); + + if (debug >= DEBUG) { + pr_debug("reset count was: 0x%02x\n", reset_counter); + } + + return 0; +} + +static int pcipcwd_get_temperature(int *temperature) +{ + *temperature = 0; + if (!pcipcwd_private.supports_temp) + return -ENODEV; + + spin_lock(&pcipcwd_private.io_lock); + *temperature = inb_p(pcipcwd_private.io_addr); + spin_unlock(&pcipcwd_private.io_lock); + + /* + * Convert celsius to fahrenheit, since this was + * the decided 'standard' for this return value. + */ + *temperature = (*temperature * 9 / 5) + 32; + + if (debug >= DEBUG) { + pr_debug("temperature is: %d F\n", *temperature); + } + + return 0; +} + +static int pcipcwd_get_timeleft(int *time_left) +{ + int msb; + int lsb; + + /* Read the time that's left before rebooting */ + /* Note: if the board is not yet armed then we will read 0xFFFF */ + send_command(CMD_READ_WATCHDOG_TIMEOUT, &msb, &lsb); + + *time_left = (msb << 8) + lsb; + + if (debug >= VERBOSE) + pr_debug("Time left before next reboot: %d\n", *time_left); + + return 0; +} + +/* + * /dev/watchdog handling + */ + +static ssize_t pcipcwd_write(struct file *file, const char __user *data, + size_t len, loff_t *ppos) +{ + /* See if we got the magic character 'V' and reload the timer */ + if (len) { + if (!nowayout) { + size_t i; + + /* note: just in case someone wrote the magic character + * five months ago... */ + expect_release = 0; + + /* scan to see whether or not we got the + * magic character */ + for (i = 0; i != len; i++) { + char c; + if (get_user(c, data + i)) + return -EFAULT; + if (c == 'V') + expect_release = 42; + } + } + + /* someone wrote to us, we should reload the timer */ + pcipcwd_keepalive(); + } + return len; +} + +static long pcipcwd_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) +{ + void __user *argp = (void __user *)arg; + int __user *p = argp; + static const struct watchdog_info ident = { + .options = WDIOF_OVERHEAT | + WDIOF_CARDRESET | + WDIOF_KEEPALIVEPING | + WDIOF_SETTIMEOUT | + WDIOF_MAGICCLOSE, + .firmware_version = 1, + .identity = WATCHDOG_DRIVER_NAME, + }; + + switch (cmd) { + case WDIOC_GETSUPPORT: + return copy_to_user(argp, &ident, sizeof(ident)) ? -EFAULT : 0; + + case WDIOC_GETSTATUS: + { + int status; + pcipcwd_get_status(&status); + return put_user(status, p); + } + + case WDIOC_GETBOOTSTATUS: + return put_user(pcipcwd_private.boot_status, p); + + case WDIOC_GETTEMP: + { + int temperature; + + if (pcipcwd_get_temperature(&temperature)) + return -EFAULT; + + return put_user(temperature, p); + } + + case WDIOC_SETOPTIONS: + { + int new_options, retval = -EINVAL; + + if (get_user(new_options, p)) + return -EFAULT; + + if (new_options & WDIOS_DISABLECARD) { + if (pcipcwd_stop()) + return -EIO; + retval = 0; + } + + if (new_options & WDIOS_ENABLECARD) { + if (pcipcwd_start()) + return -EIO; + retval = 0; + } + + if (new_options & WDIOS_TEMPPANIC) { + temp_panic = 1; + retval = 0; + } + + return retval; + } + + case WDIOC_KEEPALIVE: + pcipcwd_keepalive(); + return 0; + + case WDIOC_SETTIMEOUT: + { + int new_heartbeat; + + if (get_user(new_heartbeat, p)) + return -EFAULT; + + if (pcipcwd_set_heartbeat(new_heartbeat)) + return -EINVAL; + + pcipcwd_keepalive(); + } + /* fall through */ + + case WDIOC_GETTIMEOUT: + return put_user(heartbeat, p); + + case WDIOC_GETTIMELEFT: + { + int time_left; + + if (pcipcwd_get_timeleft(&time_left)) + return -EFAULT; + + return put_user(time_left, p); + } + + default: + return -ENOTTY; + } +} + +static int pcipcwd_open(struct inode *inode, struct file *file) +{ + /* /dev/watchdog can only be opened once */ + if (test_and_set_bit(0, &is_active)) { + if (debug >= VERBOSE) + pr_err("Attempt to open already opened device\n"); + return -EBUSY; + } + + /* Activate */ + pcipcwd_start(); + pcipcwd_keepalive(); + return nonseekable_open(inode, file); +} + +static int pcipcwd_release(struct inode *inode, struct file *file) +{ + /* + * Shut off the timer. + */ + if (expect_release == 42) { + pcipcwd_stop(); + } else { + pr_crit("Unexpected close, not stopping watchdog!\n"); + pcipcwd_keepalive(); + } + expect_release = 0; + clear_bit(0, &is_active); + return 0; +} + +/* + * /dev/temperature handling + */ + +static ssize_t pcipcwd_temp_read(struct file *file, char __user *data, + size_t len, loff_t *ppos) +{ + int temperature; + + if (pcipcwd_get_temperature(&temperature)) + return -EFAULT; + + if (copy_to_user(data, &temperature, 1)) + return -EFAULT; + + return 1; +} + +static int pcipcwd_temp_open(struct inode *inode, struct file *file) +{ + if (!pcipcwd_private.supports_temp) + return -ENODEV; + + return nonseekable_open(inode, file); +} + +static int pcipcwd_temp_release(struct inode *inode, struct file *file) +{ + return 0; +} + +/* + * Notify system + */ + +static int pcipcwd_notify_sys(struct notifier_block *this, unsigned long code, + void *unused) +{ + if (code == SYS_DOWN || code == SYS_HALT) + pcipcwd_stop(); /* Turn the WDT off */ + + return NOTIFY_DONE; +} + +/* + * Kernel Interfaces + */ + +static const struct file_operations pcipcwd_fops = { + .owner = THIS_MODULE, + .llseek = no_llseek, + .write = pcipcwd_write, + .unlocked_ioctl = pcipcwd_ioctl, + .open = pcipcwd_open, + .release = pcipcwd_release, +}; + +static struct miscdevice pcipcwd_miscdev = { + .minor = WATCHDOG_MINOR, + .name = "watchdog", + .fops = &pcipcwd_fops, +}; + +static const struct file_operations pcipcwd_temp_fops = { + .owner = THIS_MODULE, + .llseek = no_llseek, + .read = pcipcwd_temp_read, + .open = pcipcwd_temp_open, + .release = pcipcwd_temp_release, +}; + +static struct miscdevice pcipcwd_temp_miscdev = { + .minor = TEMP_MINOR, + .name = "temperature", + .fops = &pcipcwd_temp_fops, +}; + +static struct notifier_block pcipcwd_notifier = { + .notifier_call = pcipcwd_notify_sys, +}; + +/* + * Init & exit routines + */ + +static int pcipcwd_card_init(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + int ret = -EIO; + + cards_found++; + if (cards_found == 1) + pr_info("%s\n", DRIVER_VERSION); + + if (cards_found > 1) { + pr_err("This driver only supports 1 device\n"); + return -ENODEV; + } + + if (pci_enable_device(pdev)) { + pr_err("Not possible to enable PCI Device\n"); + return -ENODEV; + } + + if (pci_resource_start(pdev, 0) == 0x0000) { + pr_err("No I/O-Address for card detected\n"); + ret = -ENODEV; + goto err_out_disable_device; + } + + spin_lock_init(&pcipcwd_private.io_lock); + pcipcwd_private.pdev = pdev; + pcipcwd_private.io_addr = pci_resource_start(pdev, 0); + + if (pci_request_regions(pdev, WATCHDOG_NAME)) { + pr_err("I/O address 0x%04x already in use\n", + (int) pcipcwd_private.io_addr); + ret = -EIO; + goto err_out_disable_device; + } + + /* get the boot_status */ + pcipcwd_get_status(&pcipcwd_private.boot_status); + + /* clear the "card caused reboot" flag */ + pcipcwd_clear_status(); + + /* disable card */ + pcipcwd_stop(); + + /* Check whether or not the card supports the temperature device */ + pcipcwd_check_temperature_support(); + + /* Show info about the card itself */ + pcipcwd_show_card_info(); + + /* If heartbeat = 0 then we use the heartbeat from the dip-switches */ + if (heartbeat == 0) + heartbeat = + heartbeat_tbl[(pcipcwd_get_option_switches() & 0x07)]; + + /* Check that the heartbeat value is within it's range ; + * if not reset to the default */ + if (pcipcwd_set_heartbeat(heartbeat)) { + pcipcwd_set_heartbeat(WATCHDOG_HEARTBEAT); + pr_info("heartbeat value must be 0<heartbeat<65536, using %d\n", + WATCHDOG_HEARTBEAT); + } + + ret = register_reboot_notifier(&pcipcwd_notifier); + if (ret != 0) { + pr_err("cannot register reboot notifier (err=%d)\n", ret); + goto err_out_release_region; + } + + if (pcipcwd_private.supports_temp) { + ret = misc_register(&pcipcwd_temp_miscdev); + if (ret != 0) { + pr_err("cannot register miscdev on minor=%d (err=%d)\n", + TEMP_MINOR, ret); + goto err_out_unregister_reboot; + } + } + + ret = misc_register(&pcipcwd_miscdev); + if (ret != 0) { + pr_err("cannot register miscdev on minor=%d (err=%d)\n", + WATCHDOG_MINOR, ret); + goto err_out_misc_deregister; + } + + pr_info("initialized. heartbeat=%d sec (nowayout=%d)\n", + heartbeat, nowayout); + + return 0; + +err_out_misc_deregister: + if (pcipcwd_private.supports_temp) + misc_deregister(&pcipcwd_temp_miscdev); +err_out_unregister_reboot: + unregister_reboot_notifier(&pcipcwd_notifier); +err_out_release_region: + pci_release_regions(pdev); +err_out_disable_device: + pci_disable_device(pdev); + return ret; +} + +static void pcipcwd_card_exit(struct pci_dev *pdev) +{ + /* Stop the timer before we leave */ + if (!nowayout) + pcipcwd_stop(); + + /* Deregister */ + misc_deregister(&pcipcwd_miscdev); + if (pcipcwd_private.supports_temp) + misc_deregister(&pcipcwd_temp_miscdev); + unregister_reboot_notifier(&pcipcwd_notifier); + pci_release_regions(pdev); + pci_disable_device(pdev); + cards_found--; +} + +static const struct pci_device_id pcipcwd_pci_tbl[] = { + { PCI_VENDOR_ID_QUICKLOGIC, PCI_DEVICE_ID_WATCHDOG_PCIPCWD, + PCI_ANY_ID, PCI_ANY_ID, }, + { 0 }, /* End of list */ +}; +MODULE_DEVICE_TABLE(pci, pcipcwd_pci_tbl); + +static struct pci_driver pcipcwd_driver = { + .name = WATCHDOG_NAME, + .id_table = pcipcwd_pci_tbl, + .probe = pcipcwd_card_init, + .remove = pcipcwd_card_exit, +}; + +module_pci_driver(pcipcwd_driver); + +MODULE_AUTHOR("Wim Van Sebroeck <wim@iguana.be>"); +MODULE_DESCRIPTION("Berkshire PCI-PC Watchdog driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/watchdog/pcwd_usb.c b/drivers/watchdog/pcwd_usb.c new file mode 100644 index 000000000..4d02f2615 --- /dev/null +++ b/drivers/watchdog/pcwd_usb.c @@ -0,0 +1,809 @@ +/* + * Berkshire USB-PC Watchdog Card Driver + * + * (c) Copyright 2004-2007 Wim Van Sebroeck <wim@iguana.be>. + * + * Based on source code of the following authors: + * Ken Hollis <kenji@bitgate.com>, + * Alan Cox <alan@lxorguk.ukuu.org.uk>, + * Matt Domsch <Matt_Domsch@dell.com>, + * Rob Radez <rob@osinvestor.com>, + * Greg Kroah-Hartman <greg@kroah.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * Neither Wim Van Sebroeck nor Iguana vzw. admit liability nor + * provide warranty for any of this software. This material is + * provided "AS-IS" and at no charge. + * + * Thanks also to Simon Machell at Berkshire Products Inc. for + * providing the test hardware. More info is available at + * http://www.berkprod.com/ or http://www.pcwatchdog.com/ + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/module.h> /* For module specific items */ +#include <linux/moduleparam.h> /* For new moduleparam's */ +#include <linux/types.h> /* For standard types (like size_t) */ +#include <linux/errno.h> /* For the -ENODEV/... values */ +#include <linux/kernel.h> /* For printk/panic/... */ +#include <linux/delay.h> /* For mdelay function */ +#include <linux/miscdevice.h> /* For struct miscdevice */ +#include <linux/watchdog.h> /* For the watchdog specific items */ +#include <linux/notifier.h> /* For notifier support */ +#include <linux/reboot.h> /* For reboot_notifier stuff */ +#include <linux/init.h> /* For __init/__exit/... */ +#include <linux/fs.h> /* For file operations */ +#include <linux/usb.h> /* For USB functions */ +#include <linux/slab.h> /* For kmalloc, ... */ +#include <linux/mutex.h> /* For mutex locking */ +#include <linux/hid.h> /* For HID_REQ_SET_REPORT & HID_DT_REPORT */ +#include <linux/uaccess.h> /* For copy_to_user/put_user/... */ + + +/* Module and Version Information */ +#define DRIVER_VERSION "1.02" +#define DRIVER_AUTHOR "Wim Van Sebroeck <wim@iguana.be>" +#define DRIVER_DESC "Berkshire USB-PC Watchdog driver" +#define DRIVER_NAME "pcwd_usb" + +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL"); + +#define WATCHDOG_HEARTBEAT 0 /* default heartbeat = + delay-time from dip-switches */ +static int heartbeat = WATCHDOG_HEARTBEAT; +module_param(heartbeat, int, 0); +MODULE_PARM_DESC(heartbeat, "Watchdog heartbeat in seconds. " + "(0<heartbeat<65536 or 0=delay-time from dip-switches, default=" + __MODULE_STRING(WATCHDOG_HEARTBEAT) ")"); + +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); +MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); + +/* The vendor and product id's for the USB-PC Watchdog card */ +#define USB_PCWD_VENDOR_ID 0x0c98 +#define USB_PCWD_PRODUCT_ID 0x1140 + +/* table of devices that work with this driver */ +static const struct usb_device_id usb_pcwd_table[] = { + { USB_DEVICE(USB_PCWD_VENDOR_ID, USB_PCWD_PRODUCT_ID) }, + { } /* Terminating entry */ +}; +MODULE_DEVICE_TABLE(usb, usb_pcwd_table); + +/* according to documentation max. time to process a command for the USB + * watchdog card is 100 or 200 ms, so we give it 250 ms to do it's job */ +#define USB_COMMAND_TIMEOUT 250 + +/* Watchdog's internal commands */ +#define CMD_READ_TEMP 0x02 /* Read Temperature; + Re-trigger Watchdog */ +#define CMD_TRIGGER CMD_READ_TEMP +#define CMD_GET_STATUS 0x04 /* Get Status Information */ +#define CMD_GET_FIRMWARE_VERSION 0x08 /* Get Firmware Version */ +#define CMD_GET_DIP_SWITCH_SETTINGS 0x0c /* Get Dip Switch Settings */ +#define CMD_READ_WATCHDOG_TIMEOUT 0x18 /* Read Current Watchdog Time */ +#define CMD_WRITE_WATCHDOG_TIMEOUT 0x19 /* Write Current WatchdogTime */ +#define CMD_ENABLE_WATCHDOG 0x30 /* Enable / Disable Watchdog */ +#define CMD_DISABLE_WATCHDOG CMD_ENABLE_WATCHDOG + +/* Watchdog's Dip Switch heartbeat values */ +static const int heartbeat_tbl[] = { + 5, /* OFF-OFF-OFF = 5 Sec */ + 10, /* OFF-OFF-ON = 10 Sec */ + 30, /* OFF-ON-OFF = 30 Sec */ + 60, /* OFF-ON-ON = 1 Min */ + 300, /* ON-OFF-OFF = 5 Min */ + 600, /* ON-OFF-ON = 10 Min */ + 1800, /* ON-ON-OFF = 30 Min */ + 3600, /* ON-ON-ON = 1 hour */ +}; + +/* We can only use 1 card due to the /dev/watchdog restriction */ +static int cards_found; + +/* some internal variables */ +static unsigned long is_active; +static char expect_release; + +/* Structure to hold all of our device specific stuff */ +struct usb_pcwd_private { + /* save off the usb device pointer */ + struct usb_device *udev; + /* the interface for this device */ + struct usb_interface *interface; + + /* the interface number used for cmd's */ + unsigned int interface_number; + + /* the buffer to intr data */ + unsigned char *intr_buffer; + /* the dma address for the intr buffer */ + dma_addr_t intr_dma; + /* the size of the intr buffer */ + size_t intr_size; + /* the urb used for the intr pipe */ + struct urb *intr_urb; + + /* The command that is reported back */ + unsigned char cmd_command; + /* The data MSB that is reported back */ + unsigned char cmd_data_msb; + /* The data LSB that is reported back */ + unsigned char cmd_data_lsb; + /* true if we received a report after a command */ + atomic_t cmd_received; + + /* Wether or not the device exists */ + int exists; + /* locks this structure */ + struct mutex mtx; +}; +static struct usb_pcwd_private *usb_pcwd_device; + +/* prevent races between open() and disconnect() */ +static DEFINE_MUTEX(disconnect_mutex); + +/* local function prototypes */ +static int usb_pcwd_probe(struct usb_interface *interface, + const struct usb_device_id *id); +static void usb_pcwd_disconnect(struct usb_interface *interface); + +/* usb specific object needed to register this driver with the usb subsystem */ +static struct usb_driver usb_pcwd_driver = { + .name = DRIVER_NAME, + .probe = usb_pcwd_probe, + .disconnect = usb_pcwd_disconnect, + .id_table = usb_pcwd_table, +}; + + +static void usb_pcwd_intr_done(struct urb *urb) +{ + struct usb_pcwd_private *usb_pcwd = + (struct usb_pcwd_private *)urb->context; + unsigned char *data = usb_pcwd->intr_buffer; + struct device *dev = &usb_pcwd->interface->dev; + int retval; + + switch (urb->status) { + case 0: /* success */ + break; + case -ECONNRESET: /* unlink */ + case -ENOENT: + case -ESHUTDOWN: + /* this urb is terminated, clean up */ + dev_dbg(dev, "%s - urb shutting down with status: %d", + __func__, urb->status); + return; + /* -EPIPE: should clear the halt */ + default: /* error */ + dev_dbg(dev, "%s - nonzero urb status received: %d", + __func__, urb->status); + goto resubmit; + } + + dev_dbg(dev, "received following data cmd=0x%02x msb=0x%02x lsb=0x%02x", + data[0], data[1], data[2]); + + usb_pcwd->cmd_command = data[0]; + usb_pcwd->cmd_data_msb = data[1]; + usb_pcwd->cmd_data_lsb = data[2]; + + /* notify anyone waiting that the cmd has finished */ + atomic_set(&usb_pcwd->cmd_received, 1); + +resubmit: + retval = usb_submit_urb(urb, GFP_ATOMIC); + if (retval) + pr_err("can't resubmit intr, usb_submit_urb failed with result %d\n", + retval); +} + +static int usb_pcwd_send_command(struct usb_pcwd_private *usb_pcwd, + unsigned char cmd, unsigned char *msb, unsigned char *lsb) +{ + int got_response, count; + unsigned char *buf; + + /* We will not send any commands if the USB PCWD device does + * not exist */ + if ((!usb_pcwd) || (!usb_pcwd->exists)) + return -1; + + buf = kmalloc(6, GFP_KERNEL); + if (buf == NULL) + return 0; + + /* The USB PC Watchdog uses a 6 byte report format. + * The board currently uses only 3 of the six bytes of the report. */ + buf[0] = cmd; /* Byte 0 = CMD */ + buf[1] = *msb; /* Byte 1 = Data MSB */ + buf[2] = *lsb; /* Byte 2 = Data LSB */ + buf[3] = buf[4] = buf[5] = 0; /* All other bytes not used */ + + dev_dbg(&usb_pcwd->interface->dev, + "sending following data cmd=0x%02x msb=0x%02x lsb=0x%02x", + buf[0], buf[1], buf[2]); + + atomic_set(&usb_pcwd->cmd_received, 0); + + if (usb_control_msg(usb_pcwd->udev, usb_sndctrlpipe(usb_pcwd->udev, 0), + HID_REQ_SET_REPORT, HID_DT_REPORT, + 0x0200, usb_pcwd->interface_number, buf, 6, + USB_COMMAND_TIMEOUT) != 6) { + dev_dbg(&usb_pcwd->interface->dev, + "usb_pcwd_send_command: error in usb_control_msg for cmd 0x%x 0x%x 0x%x\n", + cmd, *msb, *lsb); + } + /* wait till the usb card processed the command, + * with a max. timeout of USB_COMMAND_TIMEOUT */ + got_response = 0; + for (count = 0; (count < USB_COMMAND_TIMEOUT) && (!got_response); + count++) { + mdelay(1); + if (atomic_read(&usb_pcwd->cmd_received)) + got_response = 1; + } + + if ((got_response) && (cmd == usb_pcwd->cmd_command)) { + /* read back response */ + *msb = usb_pcwd->cmd_data_msb; + *lsb = usb_pcwd->cmd_data_lsb; + } + + kfree(buf); + + return got_response; +} + +static int usb_pcwd_start(struct usb_pcwd_private *usb_pcwd) +{ + unsigned char msb = 0x00; + unsigned char lsb = 0x00; + int retval; + + /* Enable Watchdog */ + retval = usb_pcwd_send_command(usb_pcwd, CMD_ENABLE_WATCHDOG, + &msb, &lsb); + + if ((retval == 0) || (lsb == 0)) { + pr_err("Card did not acknowledge enable attempt\n"); + return -1; + } + + return 0; +} + +static int usb_pcwd_stop(struct usb_pcwd_private *usb_pcwd) +{ + unsigned char msb = 0xA5; + unsigned char lsb = 0xC3; + int retval; + + /* Disable Watchdog */ + retval = usb_pcwd_send_command(usb_pcwd, CMD_DISABLE_WATCHDOG, + &msb, &lsb); + + if ((retval == 0) || (lsb != 0)) { + pr_err("Card did not acknowledge disable attempt\n"); + return -1; + } + + return 0; +} + +static int usb_pcwd_keepalive(struct usb_pcwd_private *usb_pcwd) +{ + unsigned char dummy; + + /* Re-trigger Watchdog */ + usb_pcwd_send_command(usb_pcwd, CMD_TRIGGER, &dummy, &dummy); + + return 0; +} + +static int usb_pcwd_set_heartbeat(struct usb_pcwd_private *usb_pcwd, int t) +{ + unsigned char msb = t / 256; + unsigned char lsb = t % 256; + + if ((t < 0x0001) || (t > 0xFFFF)) + return -EINVAL; + + /* Write new heartbeat to watchdog */ + usb_pcwd_send_command(usb_pcwd, CMD_WRITE_WATCHDOG_TIMEOUT, &msb, &lsb); + + heartbeat = t; + return 0; +} + +static int usb_pcwd_get_temperature(struct usb_pcwd_private *usb_pcwd, + int *temperature) +{ + unsigned char msb, lsb; + + usb_pcwd_send_command(usb_pcwd, CMD_READ_TEMP, &msb, &lsb); + + /* + * Convert celsius to fahrenheit, since this was + * the decided 'standard' for this return value. + */ + *temperature = (lsb * 9 / 5) + 32; + + return 0; +} + +static int usb_pcwd_get_timeleft(struct usb_pcwd_private *usb_pcwd, + int *time_left) +{ + unsigned char msb, lsb; + + /* Read the time that's left before rebooting */ + /* Note: if the board is not yet armed then we will read 0xFFFF */ + usb_pcwd_send_command(usb_pcwd, CMD_READ_WATCHDOG_TIMEOUT, &msb, &lsb); + + *time_left = (msb << 8) + lsb; + + return 0; +} + +/* + * /dev/watchdog handling + */ + +static ssize_t usb_pcwd_write(struct file *file, const char __user *data, + size_t len, loff_t *ppos) +{ + /* See if we got the magic character 'V' and reload the timer */ + if (len) { + if (!nowayout) { + size_t i; + + /* note: just in case someone wrote the magic character + * five months ago... */ + expect_release = 0; + + /* scan to see whether or not we got the + * magic character */ + for (i = 0; i != len; i++) { + char c; + if (get_user(c, data + i)) + return -EFAULT; + if (c == 'V') + expect_release = 42; + } + } + + /* someone wrote to us, we should reload the timer */ + usb_pcwd_keepalive(usb_pcwd_device); + } + return len; +} + +static long usb_pcwd_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) +{ + void __user *argp = (void __user *)arg; + int __user *p = argp; + static const struct watchdog_info ident = { + .options = WDIOF_KEEPALIVEPING | + WDIOF_SETTIMEOUT | + WDIOF_MAGICCLOSE, + .firmware_version = 1, + .identity = DRIVER_NAME, + }; + + switch (cmd) { + case WDIOC_GETSUPPORT: + return copy_to_user(argp, &ident, sizeof(ident)) ? -EFAULT : 0; + + case WDIOC_GETSTATUS: + case WDIOC_GETBOOTSTATUS: + return put_user(0, p); + + case WDIOC_GETTEMP: + { + int temperature; + + if (usb_pcwd_get_temperature(usb_pcwd_device, &temperature)) + return -EFAULT; + + return put_user(temperature, p); + } + + case WDIOC_SETOPTIONS: + { + int new_options, retval = -EINVAL; + + if (get_user(new_options, p)) + return -EFAULT; + + if (new_options & WDIOS_DISABLECARD) { + usb_pcwd_stop(usb_pcwd_device); + retval = 0; + } + + if (new_options & WDIOS_ENABLECARD) { + usb_pcwd_start(usb_pcwd_device); + retval = 0; + } + + return retval; + } + + case WDIOC_KEEPALIVE: + usb_pcwd_keepalive(usb_pcwd_device); + return 0; + + case WDIOC_SETTIMEOUT: + { + int new_heartbeat; + + if (get_user(new_heartbeat, p)) + return -EFAULT; + + if (usb_pcwd_set_heartbeat(usb_pcwd_device, new_heartbeat)) + return -EINVAL; + + usb_pcwd_keepalive(usb_pcwd_device); + } + /* fall through */ + + case WDIOC_GETTIMEOUT: + return put_user(heartbeat, p); + + case WDIOC_GETTIMELEFT: + { + int time_left; + + if (usb_pcwd_get_timeleft(usb_pcwd_device, &time_left)) + return -EFAULT; + + return put_user(time_left, p); + } + + default: + return -ENOTTY; + } +} + +static int usb_pcwd_open(struct inode *inode, struct file *file) +{ + /* /dev/watchdog can only be opened once */ + if (test_and_set_bit(0, &is_active)) + return -EBUSY; + + /* Activate */ + usb_pcwd_start(usb_pcwd_device); + usb_pcwd_keepalive(usb_pcwd_device); + return nonseekable_open(inode, file); +} + +static int usb_pcwd_release(struct inode *inode, struct file *file) +{ + /* + * Shut off the timer. + */ + if (expect_release == 42) { + usb_pcwd_stop(usb_pcwd_device); + } else { + pr_crit("Unexpected close, not stopping watchdog!\n"); + usb_pcwd_keepalive(usb_pcwd_device); + } + expect_release = 0; + clear_bit(0, &is_active); + return 0; +} + +/* + * /dev/temperature handling + */ + +static ssize_t usb_pcwd_temperature_read(struct file *file, char __user *data, + size_t len, loff_t *ppos) +{ + int temperature; + + if (usb_pcwd_get_temperature(usb_pcwd_device, &temperature)) + return -EFAULT; + + if (copy_to_user(data, &temperature, 1)) + return -EFAULT; + + return 1; +} + +static int usb_pcwd_temperature_open(struct inode *inode, struct file *file) +{ + return nonseekable_open(inode, file); +} + +static int usb_pcwd_temperature_release(struct inode *inode, struct file *file) +{ + return 0; +} + +/* + * Notify system + */ + +static int usb_pcwd_notify_sys(struct notifier_block *this, unsigned long code, + void *unused) +{ + if (code == SYS_DOWN || code == SYS_HALT) + usb_pcwd_stop(usb_pcwd_device); /* Turn the WDT off */ + + return NOTIFY_DONE; +} + +/* + * Kernel Interfaces + */ + +static const struct file_operations usb_pcwd_fops = { + .owner = THIS_MODULE, + .llseek = no_llseek, + .write = usb_pcwd_write, + .unlocked_ioctl = usb_pcwd_ioctl, + .open = usb_pcwd_open, + .release = usb_pcwd_release, +}; + +static struct miscdevice usb_pcwd_miscdev = { + .minor = WATCHDOG_MINOR, + .name = "watchdog", + .fops = &usb_pcwd_fops, +}; + +static const struct file_operations usb_pcwd_temperature_fops = { + .owner = THIS_MODULE, + .llseek = no_llseek, + .read = usb_pcwd_temperature_read, + .open = usb_pcwd_temperature_open, + .release = usb_pcwd_temperature_release, +}; + +static struct miscdevice usb_pcwd_temperature_miscdev = { + .minor = TEMP_MINOR, + .name = "temperature", + .fops = &usb_pcwd_temperature_fops, +}; + +static struct notifier_block usb_pcwd_notifier = { + .notifier_call = usb_pcwd_notify_sys, +}; + +/** + * usb_pcwd_delete + */ +static inline void usb_pcwd_delete(struct usb_pcwd_private *usb_pcwd) +{ + usb_free_urb(usb_pcwd->intr_urb); + if (usb_pcwd->intr_buffer != NULL) + usb_free_coherent(usb_pcwd->udev, usb_pcwd->intr_size, + usb_pcwd->intr_buffer, usb_pcwd->intr_dma); + kfree(usb_pcwd); +} + +/** + * usb_pcwd_probe + * + * Called by the usb core when a new device is connected that it thinks + * this driver might be interested in. + */ +static int usb_pcwd_probe(struct usb_interface *interface, + const struct usb_device_id *id) +{ + struct usb_device *udev = interface_to_usbdev(interface); + struct usb_host_interface *iface_desc; + struct usb_endpoint_descriptor *endpoint; + struct usb_pcwd_private *usb_pcwd = NULL; + int pipe; + int retval = -ENOMEM; + int got_fw_rev; + unsigned char fw_rev_major, fw_rev_minor; + char fw_ver_str[20]; + unsigned char option_switches, dummy; + + cards_found++; + if (cards_found > 1) { + pr_err("This driver only supports 1 device\n"); + return -ENODEV; + } + + /* get the active interface descriptor */ + iface_desc = interface->cur_altsetting; + + /* check out that we have a HID device */ + if (!(iface_desc->desc.bInterfaceClass == USB_CLASS_HID)) { + pr_err("The device isn't a Human Interface Device\n"); + return -ENODEV; + } + + if (iface_desc->desc.bNumEndpoints < 1) + return -ENODEV; + + /* check out the endpoint: it has to be Interrupt & IN */ + endpoint = &iface_desc->endpoint[0].desc; + + if (!usb_endpoint_is_int_in(endpoint)) { + /* we didn't find a Interrupt endpoint with direction IN */ + pr_err("Couldn't find an INTR & IN endpoint\n"); + return -ENODEV; + } + + /* get a handle to the interrupt data pipe */ + pipe = usb_rcvintpipe(udev, endpoint->bEndpointAddress); + + /* allocate memory for our device and initialize it */ + usb_pcwd = kzalloc(sizeof(struct usb_pcwd_private), GFP_KERNEL); + if (usb_pcwd == NULL) + goto error; + + usb_pcwd_device = usb_pcwd; + + mutex_init(&usb_pcwd->mtx); + usb_pcwd->udev = udev; + usb_pcwd->interface = interface; + usb_pcwd->interface_number = iface_desc->desc.bInterfaceNumber; + usb_pcwd->intr_size = (le16_to_cpu(endpoint->wMaxPacketSize) > 8 ? + le16_to_cpu(endpoint->wMaxPacketSize) : 8); + + /* set up the memory buffer's */ + usb_pcwd->intr_buffer = usb_alloc_coherent(udev, usb_pcwd->intr_size, + GFP_ATOMIC, &usb_pcwd->intr_dma); + if (!usb_pcwd->intr_buffer) { + pr_err("Out of memory\n"); + goto error; + } + + /* allocate the urb's */ + usb_pcwd->intr_urb = usb_alloc_urb(0, GFP_KERNEL); + if (!usb_pcwd->intr_urb) + goto error; + + /* initialise the intr urb's */ + usb_fill_int_urb(usb_pcwd->intr_urb, udev, pipe, + usb_pcwd->intr_buffer, usb_pcwd->intr_size, + usb_pcwd_intr_done, usb_pcwd, endpoint->bInterval); + usb_pcwd->intr_urb->transfer_dma = usb_pcwd->intr_dma; + usb_pcwd->intr_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; + + /* register our interrupt URB with the USB system */ + if (usb_submit_urb(usb_pcwd->intr_urb, GFP_KERNEL)) { + pr_err("Problem registering interrupt URB\n"); + retval = -EIO; /* failure */ + goto error; + } + + /* The device exists and can be communicated with */ + usb_pcwd->exists = 1; + + /* disable card */ + usb_pcwd_stop(usb_pcwd); + + /* Get the Firmware Version */ + got_fw_rev = usb_pcwd_send_command(usb_pcwd, CMD_GET_FIRMWARE_VERSION, + &fw_rev_major, &fw_rev_minor); + if (got_fw_rev) + sprintf(fw_ver_str, "%u.%02u", fw_rev_major, fw_rev_minor); + else + sprintf(fw_ver_str, "<card no answer>"); + + pr_info("Found card (Firmware: %s) with temp option\n", fw_ver_str); + + /* Get switch settings */ + usb_pcwd_send_command(usb_pcwd, CMD_GET_DIP_SWITCH_SETTINGS, &dummy, + &option_switches); + + pr_info("Option switches (0x%02x): Temperature Reset Enable=%s, Power On Delay=%s\n", + option_switches, + ((option_switches & 0x10) ? "ON" : "OFF"), + ((option_switches & 0x08) ? "ON" : "OFF")); + + /* If heartbeat = 0 then we use the heartbeat from the dip-switches */ + if (heartbeat == 0) + heartbeat = heartbeat_tbl[(option_switches & 0x07)]; + + /* Check that the heartbeat value is within it's range ; + * if not reset to the default */ + if (usb_pcwd_set_heartbeat(usb_pcwd, heartbeat)) { + usb_pcwd_set_heartbeat(usb_pcwd, WATCHDOG_HEARTBEAT); + pr_info("heartbeat value must be 0<heartbeat<65536, using %d\n", + WATCHDOG_HEARTBEAT); + } + + retval = register_reboot_notifier(&usb_pcwd_notifier); + if (retval != 0) { + pr_err("cannot register reboot notifier (err=%d)\n", retval); + goto error; + } + + retval = misc_register(&usb_pcwd_temperature_miscdev); + if (retval != 0) { + pr_err("cannot register miscdev on minor=%d (err=%d)\n", + TEMP_MINOR, retval); + goto err_out_unregister_reboot; + } + + retval = misc_register(&usb_pcwd_miscdev); + if (retval != 0) { + pr_err("cannot register miscdev on minor=%d (err=%d)\n", + WATCHDOG_MINOR, retval); + goto err_out_misc_deregister; + } + + /* we can register the device now, as it is ready */ + usb_set_intfdata(interface, usb_pcwd); + + pr_info("initialized. heartbeat=%d sec (nowayout=%d)\n", + heartbeat, nowayout); + + return 0; + +err_out_misc_deregister: + misc_deregister(&usb_pcwd_temperature_miscdev); +err_out_unregister_reboot: + unregister_reboot_notifier(&usb_pcwd_notifier); +error: + if (usb_pcwd) + usb_pcwd_delete(usb_pcwd); + usb_pcwd_device = NULL; + return retval; +} + + +/** + * usb_pcwd_disconnect + * + * Called by the usb core when the device is removed from the system. + * + * This routine guarantees that the driver will not submit any more urbs + * by clearing dev->udev. + */ +static void usb_pcwd_disconnect(struct usb_interface *interface) +{ + struct usb_pcwd_private *usb_pcwd; + + /* prevent races with open() */ + mutex_lock(&disconnect_mutex); + + usb_pcwd = usb_get_intfdata(interface); + usb_set_intfdata(interface, NULL); + + mutex_lock(&usb_pcwd->mtx); + + /* Stop the timer before we leave */ + if (!nowayout) + usb_pcwd_stop(usb_pcwd); + + /* We should now stop communicating with the USB PCWD device */ + usb_pcwd->exists = 0; + + /* Deregister */ + misc_deregister(&usb_pcwd_miscdev); + misc_deregister(&usb_pcwd_temperature_miscdev); + unregister_reboot_notifier(&usb_pcwd_notifier); + + mutex_unlock(&usb_pcwd->mtx); + + /* Delete the USB PCWD device */ + usb_pcwd_delete(usb_pcwd); + + cards_found--; + + mutex_unlock(&disconnect_mutex); + + pr_info("USB PC Watchdog disconnected\n"); +} + +module_usb_driver(usb_pcwd_driver); diff --git a/drivers/watchdog/pic32-dmt.c b/drivers/watchdog/pic32-dmt.c new file mode 100644 index 000000000..c797305f8 --- /dev/null +++ b/drivers/watchdog/pic32-dmt.c @@ -0,0 +1,256 @@ +/* + * PIC32 deadman timer driver + * + * Purna Chandra Mandal <purna.mandal@microchip.com> + * Copyright (c) 2016, Microchip Technology Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#include <linux/clk.h> +#include <linux/device.h> +#include <linux/err.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/platform_device.h> +#include <linux/pm.h> +#include <linux/watchdog.h> + +#include <asm/mach-pic32/pic32.h> + +/* Deadman Timer Regs */ +#define DMTCON_REG 0x00 +#define DMTPRECLR_REG 0x10 +#define DMTCLR_REG 0x20 +#define DMTSTAT_REG 0x30 +#define DMTCNT_REG 0x40 +#define DMTPSCNT_REG 0x60 +#define DMTPSINTV_REG 0x70 + +/* Deadman Timer Regs fields */ +#define DMT_ON BIT(15) +#define DMT_STEP1_KEY BIT(6) +#define DMT_STEP2_KEY BIT(3) +#define DMTSTAT_WINOPN BIT(0) +#define DMTSTAT_EVENT BIT(5) +#define DMTSTAT_BAD2 BIT(6) +#define DMTSTAT_BAD1 BIT(7) + +/* Reset Control Register fields for watchdog */ +#define RESETCON_DMT_TIMEOUT BIT(5) + +struct pic32_dmt { + void __iomem *regs; + struct clk *clk; +}; + +static inline void dmt_enable(struct pic32_dmt *dmt) +{ + writel(DMT_ON, PIC32_SET(dmt->regs + DMTCON_REG)); +} + +static inline void dmt_disable(struct pic32_dmt *dmt) +{ + writel(DMT_ON, PIC32_CLR(dmt->regs + DMTCON_REG)); + /* + * Cannot touch registers in the CPU cycle following clearing the + * ON bit. + */ + nop(); +} + +static inline int dmt_bad_status(struct pic32_dmt *dmt) +{ + u32 val; + + val = readl(dmt->regs + DMTSTAT_REG); + val &= (DMTSTAT_BAD1 | DMTSTAT_BAD2 | DMTSTAT_EVENT); + if (val) + return -EAGAIN; + + return 0; +} + +static inline int dmt_keepalive(struct pic32_dmt *dmt) +{ + u32 v; + u32 timeout = 500; + + /* set pre-clear key */ + writel(DMT_STEP1_KEY << 8, dmt->regs + DMTPRECLR_REG); + + /* wait for DMT window to open */ + while (--timeout) { + v = readl(dmt->regs + DMTSTAT_REG) & DMTSTAT_WINOPN; + if (v == DMTSTAT_WINOPN) + break; + } + + /* apply key2 */ + writel(DMT_STEP2_KEY, dmt->regs + DMTCLR_REG); + + /* check whether keys are latched correctly */ + return dmt_bad_status(dmt); +} + +static inline u32 pic32_dmt_get_timeout_secs(struct pic32_dmt *dmt) +{ + unsigned long rate; + + rate = clk_get_rate(dmt->clk); + if (rate) + return readl(dmt->regs + DMTPSCNT_REG) / rate; + + return 0; +} + +static inline u32 pic32_dmt_bootstatus(struct pic32_dmt *dmt) +{ + u32 v; + void __iomem *rst_base; + + rst_base = ioremap(PIC32_BASE_RESET, 0x10); + if (!rst_base) + return 0; + + v = readl(rst_base); + + writel(RESETCON_DMT_TIMEOUT, PIC32_CLR(rst_base)); + + iounmap(rst_base); + return v & RESETCON_DMT_TIMEOUT; +} + +static int pic32_dmt_start(struct watchdog_device *wdd) +{ + struct pic32_dmt *dmt = watchdog_get_drvdata(wdd); + + dmt_enable(dmt); + return dmt_keepalive(dmt); +} + +static int pic32_dmt_stop(struct watchdog_device *wdd) +{ + struct pic32_dmt *dmt = watchdog_get_drvdata(wdd); + + dmt_disable(dmt); + + return 0; +} + +static int pic32_dmt_ping(struct watchdog_device *wdd) +{ + struct pic32_dmt *dmt = watchdog_get_drvdata(wdd); + + return dmt_keepalive(dmt); +} + +static const struct watchdog_ops pic32_dmt_fops = { + .owner = THIS_MODULE, + .start = pic32_dmt_start, + .stop = pic32_dmt_stop, + .ping = pic32_dmt_ping, +}; + +static const struct watchdog_info pic32_dmt_ident = { + .options = WDIOF_KEEPALIVEPING | + WDIOF_MAGICCLOSE, + .identity = "PIC32 Deadman Timer", +}; + +static struct watchdog_device pic32_dmt_wdd = { + .info = &pic32_dmt_ident, + .ops = &pic32_dmt_fops, +}; + +static int pic32_dmt_probe(struct platform_device *pdev) +{ + int ret; + struct pic32_dmt *dmt; + struct resource *mem; + struct watchdog_device *wdd = &pic32_dmt_wdd; + + dmt = devm_kzalloc(&pdev->dev, sizeof(*dmt), GFP_KERNEL); + if (!dmt) + return -ENOMEM; + + mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); + dmt->regs = devm_ioremap_resource(&pdev->dev, mem); + if (IS_ERR(dmt->regs)) + return PTR_ERR(dmt->regs); + + dmt->clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(dmt->clk)) { + dev_err(&pdev->dev, "clk not found\n"); + return PTR_ERR(dmt->clk); + } + + ret = clk_prepare_enable(dmt->clk); + if (ret) + return ret; + + wdd->timeout = pic32_dmt_get_timeout_secs(dmt); + if (!wdd->timeout) { + dev_err(&pdev->dev, + "failed to read watchdog register timeout\n"); + ret = -EINVAL; + goto out_disable_clk; + } + + dev_info(&pdev->dev, "timeout %d\n", wdd->timeout); + + wdd->bootstatus = pic32_dmt_bootstatus(dmt) ? WDIOF_CARDRESET : 0; + + watchdog_set_nowayout(wdd, WATCHDOG_NOWAYOUT); + watchdog_set_drvdata(wdd, dmt); + + ret = watchdog_register_device(wdd); + if (ret) { + dev_err(&pdev->dev, "watchdog register failed, err %d\n", ret); + goto out_disable_clk; + } + + platform_set_drvdata(pdev, wdd); + return 0; + +out_disable_clk: + clk_disable_unprepare(dmt->clk); + return ret; +} + +static int pic32_dmt_remove(struct platform_device *pdev) +{ + struct watchdog_device *wdd = platform_get_drvdata(pdev); + struct pic32_dmt *dmt = watchdog_get_drvdata(wdd); + + watchdog_unregister_device(wdd); + clk_disable_unprepare(dmt->clk); + + return 0; +} + +static const struct of_device_id pic32_dmt_of_ids[] = { + { .compatible = "microchip,pic32mzda-dmt",}, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, pic32_dmt_of_ids); + +static struct platform_driver pic32_dmt_driver = { + .probe = pic32_dmt_probe, + .remove = pic32_dmt_remove, + .driver = { + .name = "pic32-dmt", + .of_match_table = of_match_ptr(pic32_dmt_of_ids), + } +}; + +module_platform_driver(pic32_dmt_driver); + +MODULE_AUTHOR("Purna Chandra Mandal <purna.mandal@microchip.com>"); +MODULE_DESCRIPTION("Microchip PIC32 DMT Driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/watchdog/pic32-wdt.c b/drivers/watchdog/pic32-wdt.c new file mode 100644 index 000000000..e2761068d --- /dev/null +++ b/drivers/watchdog/pic32-wdt.c @@ -0,0 +1,262 @@ +/* + * PIC32 watchdog driver + * + * Joshua Henderson <joshua.henderson@microchip.com> + * Copyright (c) 2016, Microchip Technology Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#include <linux/clk.h> +#include <linux/device.h> +#include <linux/err.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/platform_device.h> +#include <linux/pm.h> +#include <linux/watchdog.h> + +#include <asm/mach-pic32/pic32.h> + +/* Watchdog Timer Registers */ +#define WDTCON_REG 0x00 + +/* Watchdog Timer Control Register fields */ +#define WDTCON_WIN_EN BIT(0) +#define WDTCON_RMCS_MASK 0x0003 +#define WDTCON_RMCS_SHIFT 0x0006 +#define WDTCON_RMPS_MASK 0x001F +#define WDTCON_RMPS_SHIFT 0x0008 +#define WDTCON_ON BIT(15) +#define WDTCON_CLR_KEY 0x5743 + +/* Reset Control Register fields for watchdog */ +#define RESETCON_TIMEOUT_IDLE BIT(2) +#define RESETCON_TIMEOUT_SLEEP BIT(3) +#define RESETCON_WDT_TIMEOUT BIT(4) + +struct pic32_wdt { + void __iomem *regs; + void __iomem *rst_base; + struct clk *clk; +}; + +static inline bool pic32_wdt_is_win_enabled(struct pic32_wdt *wdt) +{ + return !!(readl(wdt->regs + WDTCON_REG) & WDTCON_WIN_EN); +} + +static inline u32 pic32_wdt_get_post_scaler(struct pic32_wdt *wdt) +{ + u32 v = readl(wdt->regs + WDTCON_REG); + + return (v >> WDTCON_RMPS_SHIFT) & WDTCON_RMPS_MASK; +} + +static inline u32 pic32_wdt_get_clk_id(struct pic32_wdt *wdt) +{ + u32 v = readl(wdt->regs + WDTCON_REG); + + return (v >> WDTCON_RMCS_SHIFT) & WDTCON_RMCS_MASK; +} + +static int pic32_wdt_bootstatus(struct pic32_wdt *wdt) +{ + u32 v = readl(wdt->rst_base); + + writel(RESETCON_WDT_TIMEOUT, PIC32_CLR(wdt->rst_base)); + + return v & RESETCON_WDT_TIMEOUT; +} + +static u32 pic32_wdt_get_timeout_secs(struct pic32_wdt *wdt, struct device *dev) +{ + unsigned long rate; + u32 period, ps, terminal; + + rate = clk_get_rate(wdt->clk); + + dev_dbg(dev, "wdt: clk_id %d, clk_rate %lu (prescale)\n", + pic32_wdt_get_clk_id(wdt), rate); + + /* default, prescaler of 32 (i.e. div-by-32) is implicit. */ + rate >>= 5; + if (!rate) + return 0; + + /* calculate terminal count from postscaler. */ + ps = pic32_wdt_get_post_scaler(wdt); + terminal = BIT(ps); + + /* find time taken (in secs) to reach terminal count */ + period = terminal / rate; + dev_dbg(dev, + "wdt: clk_rate %lu (postscale) / terminal %d, timeout %dsec\n", + rate, terminal, period); + + return period; +} + +static void pic32_wdt_keepalive(struct pic32_wdt *wdt) +{ + /* write key through single half-word */ + writew(WDTCON_CLR_KEY, wdt->regs + WDTCON_REG + 2); +} + +static int pic32_wdt_start(struct watchdog_device *wdd) +{ + struct pic32_wdt *wdt = watchdog_get_drvdata(wdd); + + writel(WDTCON_ON, PIC32_SET(wdt->regs + WDTCON_REG)); + pic32_wdt_keepalive(wdt); + + return 0; +} + +static int pic32_wdt_stop(struct watchdog_device *wdd) +{ + struct pic32_wdt *wdt = watchdog_get_drvdata(wdd); + + writel(WDTCON_ON, PIC32_CLR(wdt->regs + WDTCON_REG)); + + /* + * Cannot touch registers in the CPU cycle following clearing the + * ON bit. + */ + nop(); + + return 0; +} + +static int pic32_wdt_ping(struct watchdog_device *wdd) +{ + struct pic32_wdt *wdt = watchdog_get_drvdata(wdd); + + pic32_wdt_keepalive(wdt); + + return 0; +} + +static const struct watchdog_ops pic32_wdt_fops = { + .owner = THIS_MODULE, + .start = pic32_wdt_start, + .stop = pic32_wdt_stop, + .ping = pic32_wdt_ping, +}; + +static const struct watchdog_info pic32_wdt_ident = { + .options = WDIOF_KEEPALIVEPING | + WDIOF_MAGICCLOSE | WDIOF_CARDRESET, + .identity = "PIC32 Watchdog", +}; + +static struct watchdog_device pic32_wdd = { + .info = &pic32_wdt_ident, + .ops = &pic32_wdt_fops, +}; + +static const struct of_device_id pic32_wdt_dt_ids[] = { + { .compatible = "microchip,pic32mzda-wdt", }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, pic32_wdt_dt_ids); + +static int pic32_wdt_drv_probe(struct platform_device *pdev) +{ + int ret; + struct watchdog_device *wdd = &pic32_wdd; + struct pic32_wdt *wdt; + struct resource *mem; + + wdt = devm_kzalloc(&pdev->dev, sizeof(*wdt), GFP_KERNEL); + if (!wdt) + return -ENOMEM; + + mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); + wdt->regs = devm_ioremap_resource(&pdev->dev, mem); + if (IS_ERR(wdt->regs)) + return PTR_ERR(wdt->regs); + + wdt->rst_base = devm_ioremap(&pdev->dev, PIC32_BASE_RESET, 0x10); + if (!wdt->rst_base) + return -ENOMEM; + + wdt->clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(wdt->clk)) { + dev_err(&pdev->dev, "clk not found\n"); + return PTR_ERR(wdt->clk); + } + + ret = clk_prepare_enable(wdt->clk); + if (ret) { + dev_err(&pdev->dev, "clk enable failed\n"); + return ret; + } + + if (pic32_wdt_is_win_enabled(wdt)) { + dev_err(&pdev->dev, "windowed-clear mode is not supported.\n"); + ret = -ENODEV; + goto out_disable_clk; + } + + wdd->timeout = pic32_wdt_get_timeout_secs(wdt, &pdev->dev); + if (!wdd->timeout) { + dev_err(&pdev->dev, + "failed to read watchdog register timeout\n"); + ret = -EINVAL; + goto out_disable_clk; + } + + dev_info(&pdev->dev, "timeout %d\n", wdd->timeout); + + wdd->bootstatus = pic32_wdt_bootstatus(wdt) ? WDIOF_CARDRESET : 0; + + watchdog_set_nowayout(wdd, WATCHDOG_NOWAYOUT); + watchdog_set_drvdata(wdd, wdt); + + ret = watchdog_register_device(wdd); + if (ret) { + dev_err(&pdev->dev, "watchdog register failed, err %d\n", ret); + goto out_disable_clk; + } + + platform_set_drvdata(pdev, wdd); + + return 0; + +out_disable_clk: + clk_disable_unprepare(wdt->clk); + + return ret; +} + +static int pic32_wdt_drv_remove(struct platform_device *pdev) +{ + struct watchdog_device *wdd = platform_get_drvdata(pdev); + struct pic32_wdt *wdt = watchdog_get_drvdata(wdd); + + watchdog_unregister_device(wdd); + clk_disable_unprepare(wdt->clk); + + return 0; +} + +static struct platform_driver pic32_wdt_driver = { + .probe = pic32_wdt_drv_probe, + .remove = pic32_wdt_drv_remove, + .driver = { + .name = "pic32-wdt", + .of_match_table = of_match_ptr(pic32_wdt_dt_ids), + } +}; + +module_platform_driver(pic32_wdt_driver); + +MODULE_AUTHOR("Joshua Henderson <joshua.henderson@microchip.com>"); +MODULE_DESCRIPTION("Microchip PIC32 Watchdog Timer"); +MODULE_LICENSE("GPL"); diff --git a/drivers/watchdog/pika_wdt.c b/drivers/watchdog/pika_wdt.c new file mode 100644 index 000000000..e0a6f8c0f --- /dev/null +++ b/drivers/watchdog/pika_wdt.c @@ -0,0 +1,301 @@ +/* + * PIKA FPGA based Watchdog Timer + * + * Copyright (c) 2008 PIKA Technologies + * Sean MacLennan <smaclennan@pikatech.com> + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/init.h> +#include <linux/errno.h> +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/types.h> +#include <linux/kernel.h> +#include <linux/fs.h> +#include <linux/miscdevice.h> +#include <linux/watchdog.h> +#include <linux/reboot.h> +#include <linux/jiffies.h> +#include <linux/timer.h> +#include <linux/bitops.h> +#include <linux/uaccess.h> +#include <linux/io.h> +#include <linux/of_address.h> +#include <linux/of_platform.h> + +#define DRV_NAME "PIKA-WDT" + +/* Hardware timeout in seconds */ +#define WDT_HW_TIMEOUT 2 + +/* Timer heartbeat (500ms) */ +#define WDT_TIMEOUT (HZ/2) + +/* User land timeout */ +#define WDT_HEARTBEAT 15 +static int heartbeat = WDT_HEARTBEAT; +module_param(heartbeat, int, 0); +MODULE_PARM_DESC(heartbeat, "Watchdog heartbeats in seconds. " + "(default = " __MODULE_STRING(WDT_HEARTBEAT) ")"); + +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); +MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started " + "(default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); + +static struct { + void __iomem *fpga; + unsigned long next_heartbeat; /* the next_heartbeat for the timer */ + unsigned long open; + char expect_close; + int bootstatus; + struct timer_list timer; /* The timer that pings the watchdog */ +} pikawdt_private; + +static struct watchdog_info ident __ro_after_init = { + .identity = DRV_NAME, + .options = WDIOF_CARDRESET | + WDIOF_SETTIMEOUT | + WDIOF_KEEPALIVEPING | + WDIOF_MAGICCLOSE, +}; + +/* + * Reload the watchdog timer. (ie, pat the watchdog) + */ +static inline void pikawdt_reset(void) +{ + /* -- FPGA: Reset Control Register (32bit R/W) (Offset: 0x14) -- + * Bit 7, WTCHDG_EN: When set to 1, the watchdog timer is enabled. + * Once enabled, it cannot be disabled. The watchdog can be + * kicked by performing any write access to the reset + * control register (this register). + * Bit 8-11, WTCHDG_TIMEOUT_SEC: Sets the watchdog timeout value in + * seconds. Valid ranges are 1 to 15 seconds. The value can + * be modified dynamically. + */ + unsigned reset = in_be32(pikawdt_private.fpga + 0x14); + /* enable with max timeout - 15 seconds */ + reset |= (1 << 7) + (WDT_HW_TIMEOUT << 8); + out_be32(pikawdt_private.fpga + 0x14, reset); +} + +/* + * Timer tick + */ +static void pikawdt_ping(struct timer_list *unused) +{ + if (time_before(jiffies, pikawdt_private.next_heartbeat) || + (!nowayout && !pikawdt_private.open)) { + pikawdt_reset(); + mod_timer(&pikawdt_private.timer, jiffies + WDT_TIMEOUT); + } else + pr_crit("I will reset your machine !\n"); +} + + +static void pikawdt_keepalive(void) +{ + pikawdt_private.next_heartbeat = jiffies + heartbeat * HZ; +} + +static void pikawdt_start(void) +{ + pikawdt_keepalive(); + mod_timer(&pikawdt_private.timer, jiffies + WDT_TIMEOUT); +} + +/* + * Watchdog device is opened, and watchdog starts running. + */ +static int pikawdt_open(struct inode *inode, struct file *file) +{ + /* /dev/watchdog can only be opened once */ + if (test_and_set_bit(0, &pikawdt_private.open)) + return -EBUSY; + + pikawdt_start(); + + return nonseekable_open(inode, file); +} + +/* + * Close the watchdog device. + */ +static int pikawdt_release(struct inode *inode, struct file *file) +{ + /* stop internal ping */ + if (!pikawdt_private.expect_close) + del_timer(&pikawdt_private.timer); + + clear_bit(0, &pikawdt_private.open); + pikawdt_private.expect_close = 0; + return 0; +} + +/* + * Pat the watchdog whenever device is written to. + */ +static ssize_t pikawdt_write(struct file *file, const char __user *data, + size_t len, loff_t *ppos) +{ + if (!len) + return 0; + + /* Scan for magic character */ + if (!nowayout) { + size_t i; + + pikawdt_private.expect_close = 0; + + for (i = 0; i < len; i++) { + char c; + if (get_user(c, data + i)) + return -EFAULT; + if (c == 'V') { + pikawdt_private.expect_close = 42; + break; + } + } + } + + pikawdt_keepalive(); + + return len; +} + +/* + * Handle commands from user-space. + */ +static long pikawdt_ioctl(struct file *file, + unsigned int cmd, unsigned long arg) +{ + void __user *argp = (void __user *)arg; + int __user *p = argp; + int new_value; + + switch (cmd) { + case WDIOC_GETSUPPORT: + return copy_to_user(argp, &ident, sizeof(ident)) ? -EFAULT : 0; + + case WDIOC_GETSTATUS: + return put_user(0, p); + + case WDIOC_GETBOOTSTATUS: + return put_user(pikawdt_private.bootstatus, p); + + case WDIOC_KEEPALIVE: + pikawdt_keepalive(); + return 0; + + case WDIOC_SETTIMEOUT: + if (get_user(new_value, p)) + return -EFAULT; + + heartbeat = new_value; + pikawdt_keepalive(); + + return put_user(new_value, p); /* return current value */ + + case WDIOC_GETTIMEOUT: + return put_user(heartbeat, p); + } + return -ENOTTY; +} + + +static const struct file_operations pikawdt_fops = { + .owner = THIS_MODULE, + .llseek = no_llseek, + .open = pikawdt_open, + .release = pikawdt_release, + .write = pikawdt_write, + .unlocked_ioctl = pikawdt_ioctl, +}; + +static struct miscdevice pikawdt_miscdev = { + .minor = WATCHDOG_MINOR, + .name = "watchdog", + .fops = &pikawdt_fops, +}; + +static int __init pikawdt_init(void) +{ + struct device_node *np; + void __iomem *fpga; + static u32 post1; + int ret; + + np = of_find_compatible_node(NULL, NULL, "pika,fpga"); + if (np == NULL) { + pr_err("Unable to find fpga\n"); + return -ENOENT; + } + + pikawdt_private.fpga = of_iomap(np, 0); + of_node_put(np); + if (pikawdt_private.fpga == NULL) { + pr_err("Unable to map fpga\n"); + return -ENOMEM; + } + + ident.firmware_version = in_be32(pikawdt_private.fpga + 0x1c) & 0xffff; + + /* POST information is in the sd area. */ + np = of_find_compatible_node(NULL, NULL, "pika,fpga-sd"); + if (np == NULL) { + pr_err("Unable to find fpga-sd\n"); + ret = -ENOENT; + goto out; + } + + fpga = of_iomap(np, 0); + of_node_put(np); + if (fpga == NULL) { + pr_err("Unable to map fpga-sd\n"); + ret = -ENOMEM; + goto out; + } + + /* -- FPGA: POST Test Results Register 1 (32bit R/W) (Offset: 0x4040) -- + * Bit 31, WDOG: Set to 1 when the last reset was caused by a watchdog + * timeout. + */ + post1 = in_be32(fpga + 0x40); + if (post1 & 0x80000000) + pikawdt_private.bootstatus = WDIOF_CARDRESET; + + iounmap(fpga); + + timer_setup(&pikawdt_private.timer, pikawdt_ping, 0); + + ret = misc_register(&pikawdt_miscdev); + if (ret) { + pr_err("Unable to register miscdev\n"); + goto out; + } + + pr_info("initialized. heartbeat=%d sec (nowayout=%d)\n", + heartbeat, nowayout); + return 0; + +out: + iounmap(pikawdt_private.fpga); + return ret; +} + +static void __exit pikawdt_exit(void) +{ + misc_deregister(&pikawdt_miscdev); + + iounmap(pikawdt_private.fpga); +} + +module_init(pikawdt_init); +module_exit(pikawdt_exit); + +MODULE_AUTHOR("Sean MacLennan <smaclennan@pikatech.com>"); +MODULE_DESCRIPTION("PIKA FPGA based Watchdog Timer"); +MODULE_LICENSE("GPL"); diff --git a/drivers/watchdog/pnx4008_wdt.c b/drivers/watchdog/pnx4008_wdt.c new file mode 100644 index 000000000..8e261799c --- /dev/null +++ b/drivers/watchdog/pnx4008_wdt.c @@ -0,0 +1,272 @@ +/* + * drivers/char/watchdog/pnx4008_wdt.c + * + * Watchdog driver for PNX4008 board + * + * Authors: Dmitry Chigirev <source@mvista.com>, + * Vitaly Wool <vitalywool@gmail.com> + * Based on sa1100 driver, + * Copyright (C) 2000 Oleg Drokin <green@crimea.edu> + * + * 2005-2006 (c) MontaVista Software, Inc. + * + * (C) 2012 Wolfram Sang, Pengutronix + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/types.h> +#include <linux/kernel.h> +#include <linux/watchdog.h> +#include <linux/platform_device.h> +#include <linux/clk.h> +#include <linux/spinlock.h> +#include <linux/io.h> +#include <linux/slab.h> +#include <linux/err.h> +#include <linux/of.h> +#include <linux/delay.h> +#include <linux/reboot.h> +#include <mach/hardware.h> + +/* WatchDog Timer - Chapter 23 Page 207 */ + +#define DEFAULT_HEARTBEAT 19 +#define MAX_HEARTBEAT 60 + +/* Watchdog timer register set definition */ +#define WDTIM_INT(p) ((p) + 0x0) +#define WDTIM_CTRL(p) ((p) + 0x4) +#define WDTIM_COUNTER(p) ((p) + 0x8) +#define WDTIM_MCTRL(p) ((p) + 0xC) +#define WDTIM_MATCH0(p) ((p) + 0x10) +#define WDTIM_EMR(p) ((p) + 0x14) +#define WDTIM_PULSE(p) ((p) + 0x18) +#define WDTIM_RES(p) ((p) + 0x1C) + +/* WDTIM_INT bit definitions */ +#define MATCH_INT 1 + +/* WDTIM_CTRL bit definitions */ +#define COUNT_ENAB 1 +#define RESET_COUNT (1 << 1) +#define DEBUG_EN (1 << 2) + +/* WDTIM_MCTRL bit definitions */ +#define MR0_INT 1 +#undef RESET_COUNT0 +#define RESET_COUNT0 (1 << 2) +#define STOP_COUNT0 (1 << 2) +#define M_RES1 (1 << 3) +#define M_RES2 (1 << 4) +#define RESFRC1 (1 << 5) +#define RESFRC2 (1 << 6) + +/* WDTIM_EMR bit definitions */ +#define EXT_MATCH0 1 +#define MATCH_OUTPUT_HIGH (2 << 4) /*a MATCH_CTRL setting */ + +/* WDTIM_RES bit definitions */ +#define WDOG_RESET 1 /* read only */ + +#define WDOG_COUNTER_RATE 13000000 /*the counter clock is 13 MHz fixed */ + +static bool nowayout = WATCHDOG_NOWAYOUT; +static unsigned int heartbeat; + +static DEFINE_SPINLOCK(io_lock); +static void __iomem *wdt_base; +static struct clk *wdt_clk; + +static int pnx4008_wdt_start(struct watchdog_device *wdd) +{ + spin_lock(&io_lock); + + /* stop counter, initiate counter reset */ + writel(RESET_COUNT, WDTIM_CTRL(wdt_base)); + /*wait for reset to complete. 100% guarantee event */ + while (readl(WDTIM_COUNTER(wdt_base))) + cpu_relax(); + /* internal and external reset, stop after that */ + writel(M_RES2 | STOP_COUNT0 | RESET_COUNT0, WDTIM_MCTRL(wdt_base)); + /* configure match output */ + writel(MATCH_OUTPUT_HIGH, WDTIM_EMR(wdt_base)); + /* clear interrupt, just in case */ + writel(MATCH_INT, WDTIM_INT(wdt_base)); + /* the longest pulse period 65541/(13*10^6) seconds ~ 5 ms. */ + writel(0xFFFF, WDTIM_PULSE(wdt_base)); + writel(wdd->timeout * WDOG_COUNTER_RATE, WDTIM_MATCH0(wdt_base)); + /*enable counter, stop when debugger active */ + writel(COUNT_ENAB | DEBUG_EN, WDTIM_CTRL(wdt_base)); + + spin_unlock(&io_lock); + return 0; +} + +static int pnx4008_wdt_stop(struct watchdog_device *wdd) +{ + spin_lock(&io_lock); + + writel(0, WDTIM_CTRL(wdt_base)); /*stop counter */ + + spin_unlock(&io_lock); + return 0; +} + +static int pnx4008_wdt_set_timeout(struct watchdog_device *wdd, + unsigned int new_timeout) +{ + wdd->timeout = new_timeout; + return 0; +} + +static int pnx4008_restart_handler(struct watchdog_device *wdd, + unsigned long mode, void *cmd) +{ + const char *boot_cmd = cmd; + + /* + * Verify if a "cmd" passed from the userspace program rebooting + * the system; if available, handle it. + * - For details, see the 'reboot' syscall in kernel/reboot.c + * - If the received "cmd" is not supported, use the default mode. + */ + if (boot_cmd) { + if (boot_cmd[0] == 'h') + mode = REBOOT_HARD; + else if (boot_cmd[0] == 's') + mode = REBOOT_SOFT; + } + + if (mode == REBOOT_SOFT) { + /* Force match output active */ + writel(EXT_MATCH0, WDTIM_EMR(wdt_base)); + /* Internal reset on match output (RESOUT_N not asserted) */ + writel(M_RES1, WDTIM_MCTRL(wdt_base)); + } else { + /* Instant assert of RESETOUT_N with pulse length 1mS */ + writel(13000, WDTIM_PULSE(wdt_base)); + writel(M_RES2 | RESFRC1 | RESFRC2, WDTIM_MCTRL(wdt_base)); + } + + /* Wait for watchdog to reset system */ + mdelay(1000); + + return NOTIFY_DONE; +} + +static const struct watchdog_info pnx4008_wdt_ident = { + .options = WDIOF_CARDRESET | WDIOF_MAGICCLOSE | + WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING, + .identity = "PNX4008 Watchdog", +}; + +static const struct watchdog_ops pnx4008_wdt_ops = { + .owner = THIS_MODULE, + .start = pnx4008_wdt_start, + .stop = pnx4008_wdt_stop, + .set_timeout = pnx4008_wdt_set_timeout, + .restart = pnx4008_restart_handler, +}; + +static struct watchdog_device pnx4008_wdd = { + .info = &pnx4008_wdt_ident, + .ops = &pnx4008_wdt_ops, + .timeout = DEFAULT_HEARTBEAT, + .min_timeout = 1, + .max_timeout = MAX_HEARTBEAT, +}; + +static int pnx4008_wdt_probe(struct platform_device *pdev) +{ + struct resource *r; + int ret = 0; + + watchdog_init_timeout(&pnx4008_wdd, heartbeat, &pdev->dev); + + r = platform_get_resource(pdev, IORESOURCE_MEM, 0); + wdt_base = devm_ioremap_resource(&pdev->dev, r); + if (IS_ERR(wdt_base)) + return PTR_ERR(wdt_base); + + wdt_clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(wdt_clk)) + return PTR_ERR(wdt_clk); + + ret = clk_prepare_enable(wdt_clk); + if (ret) + return ret; + + pnx4008_wdd.bootstatus = (readl(WDTIM_RES(wdt_base)) & WDOG_RESET) ? + WDIOF_CARDRESET : 0; + pnx4008_wdd.parent = &pdev->dev; + watchdog_set_nowayout(&pnx4008_wdd, nowayout); + watchdog_set_restart_priority(&pnx4008_wdd, 128); + + pnx4008_wdt_stop(&pnx4008_wdd); /* disable for now */ + + ret = watchdog_register_device(&pnx4008_wdd); + if (ret < 0) { + dev_err(&pdev->dev, "cannot register watchdog device\n"); + goto disable_clk; + } + + dev_info(&pdev->dev, "heartbeat %d sec\n", pnx4008_wdd.timeout); + + return 0; + +disable_clk: + clk_disable_unprepare(wdt_clk); + return ret; +} + +static int pnx4008_wdt_remove(struct platform_device *pdev) +{ + watchdog_unregister_device(&pnx4008_wdd); + + clk_disable_unprepare(wdt_clk); + + return 0; +} + +#ifdef CONFIG_OF +static const struct of_device_id pnx4008_wdt_match[] = { + { .compatible = "nxp,pnx4008-wdt" }, + { } +}; +MODULE_DEVICE_TABLE(of, pnx4008_wdt_match); +#endif + +static struct platform_driver platform_wdt_driver = { + .driver = { + .name = "pnx4008-watchdog", + .of_match_table = of_match_ptr(pnx4008_wdt_match), + }, + .probe = pnx4008_wdt_probe, + .remove = pnx4008_wdt_remove, +}; + +module_platform_driver(platform_wdt_driver); + +MODULE_AUTHOR("MontaVista Software, Inc. <source@mvista.com>"); +MODULE_AUTHOR("Wolfram Sang <kernel@pengutronix.de>"); +MODULE_DESCRIPTION("PNX4008 Watchdog Driver"); + +module_param(heartbeat, uint, 0); +MODULE_PARM_DESC(heartbeat, + "Watchdog heartbeat period in seconds from 1 to " + __MODULE_STRING(MAX_HEARTBEAT) ", default " + __MODULE_STRING(DEFAULT_HEARTBEAT)); + +module_param(nowayout, bool, 0); +MODULE_PARM_DESC(nowayout, + "Set to 1 to keep watchdog running after device release"); + +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:pnx4008-watchdog"); diff --git a/drivers/watchdog/pnx833x_wdt.c b/drivers/watchdog/pnx833x_wdt.c new file mode 100644 index 000000000..882fdcb46 --- /dev/null +++ b/drivers/watchdog/pnx833x_wdt.c @@ -0,0 +1,280 @@ +/* + * PNX833x Hardware Watchdog Driver + * Copyright 2008 NXP Semiconductors + * Daniel Laird <daniel.j.laird@nxp.com> + * Andre McCurdy <andre.mccurdy@nxp.com> + * + * Heavily based upon - IndyDog 0.3 + * A Hardware Watchdog Device for SGI IP22 + * + * (c) Copyright 2002 Guido Guenther <agx@sigxcpu.org>, All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * based on softdog.c by Alan Cox <alan@redhat.com> + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/types.h> +#include <linux/kernel.h> +#include <linux/fs.h> +#include <linux/mm.h> +#include <linux/miscdevice.h> +#include <linux/watchdog.h> +#include <linux/notifier.h> +#include <linux/reboot.h> +#include <linux/init.h> +#include <asm/mach-pnx833x/pnx833x.h> + +#define WATCHDOG_TIMEOUT 30 /* 30 sec Maximum timeout */ +#define WATCHDOG_COUNT_FREQUENCY 68000000U /* Watchdog counts at 68MHZ. */ +#define PNX_WATCHDOG_TIMEOUT (WATCHDOG_TIMEOUT * WATCHDOG_COUNT_FREQUENCY) +#define PNX_TIMEOUT_VALUE 2040000000U + +/** CONFIG block */ +#define PNX833X_CONFIG (0x07000U) +#define PNX833X_CONFIG_CPU_WATCHDOG (0x54) +#define PNX833X_CONFIG_CPU_WATCHDOG_COMPARE (0x58) +#define PNX833X_CONFIG_CPU_COUNTERS_CONTROL (0x1c) + +/** RESET block */ +#define PNX833X_RESET (0x08000U) +#define PNX833X_RESET_CONFIG (0x08) + +static int pnx833x_wdt_alive; + +/* Set default timeout in MHZ.*/ +static int pnx833x_wdt_timeout = PNX_WATCHDOG_TIMEOUT; +module_param(pnx833x_wdt_timeout, int, 0); +MODULE_PARM_DESC(timeout, "Watchdog timeout in Mhz. (68Mhz clock), default=" + __MODULE_STRING(PNX_TIMEOUT_VALUE) "(30 seconds)."); + +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); +MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); + +#define START_DEFAULT 1 +static int start_enabled = START_DEFAULT; +module_param(start_enabled, int, 0); +MODULE_PARM_DESC(start_enabled, "Watchdog is started on module insertion " + "(default=" __MODULE_STRING(START_DEFAULT) ")"); + +static void pnx833x_wdt_start(void) +{ + /* Enable watchdog causing reset. */ + PNX833X_REG(PNX833X_RESET + PNX833X_RESET_CONFIG) |= 0x1; + /* Set timeout.*/ + PNX833X_REG(PNX833X_CONFIG + + PNX833X_CONFIG_CPU_WATCHDOG_COMPARE) = pnx833x_wdt_timeout; + /* Enable watchdog. */ + PNX833X_REG(PNX833X_CONFIG + + PNX833X_CONFIG_CPU_COUNTERS_CONTROL) |= 0x1; + + pr_info("Started watchdog timer\n"); +} + +static void pnx833x_wdt_stop(void) +{ + /* Disable watchdog causing reset. */ + PNX833X_REG(PNX833X_RESET + PNX833X_CONFIG) &= 0xFFFFFFFE; + /* Disable watchdog.*/ + PNX833X_REG(PNX833X_CONFIG + + PNX833X_CONFIG_CPU_COUNTERS_CONTROL) &= 0xFFFFFFFE; + + pr_info("Stopped watchdog timer\n"); +} + +static void pnx833x_wdt_ping(void) +{ + PNX833X_REG(PNX833X_CONFIG + + PNX833X_CONFIG_CPU_WATCHDOG_COMPARE) = pnx833x_wdt_timeout; +} + +/* + * Allow only one person to hold it open + */ +static int pnx833x_wdt_open(struct inode *inode, struct file *file) +{ + if (test_and_set_bit(0, &pnx833x_wdt_alive)) + return -EBUSY; + + if (nowayout) + __module_get(THIS_MODULE); + + /* Activate timer */ + if (!start_enabled) + pnx833x_wdt_start(); + + pnx833x_wdt_ping(); + + pr_info("Started watchdog timer\n"); + + return nonseekable_open(inode, file); +} + +static int pnx833x_wdt_release(struct inode *inode, struct file *file) +{ + /* Shut off the timer. + * Lock it in if it's a module and we defined ...NOWAYOUT */ + if (!nowayout) + pnx833x_wdt_stop(); /* Turn the WDT off */ + + clear_bit(0, &pnx833x_wdt_alive); + return 0; +} + +static ssize_t pnx833x_wdt_write(struct file *file, const char *data, size_t len, loff_t *ppos) +{ + /* Refresh the timer. */ + if (len) + pnx833x_wdt_ping(); + + return len; +} + +static long pnx833x_wdt_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) +{ + int options, new_timeout = 0; + uint32_t timeout, timeout_left = 0; + + static const struct watchdog_info ident = { + .options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT, + .firmware_version = 0, + .identity = "Hardware Watchdog for PNX833x", + }; + + switch (cmd) { + default: + return -ENOTTY; + + case WDIOC_GETSUPPORT: + if (copy_to_user((struct watchdog_info *)arg, + &ident, sizeof(ident))) + return -EFAULT; + return 0; + + case WDIOC_GETSTATUS: + case WDIOC_GETBOOTSTATUS: + return put_user(0, (int *)arg); + + case WDIOC_SETOPTIONS: + if (get_user(options, (int *)arg)) + return -EFAULT; + + if (options & WDIOS_DISABLECARD) + pnx833x_wdt_stop(); + + if (options & WDIOS_ENABLECARD) + pnx833x_wdt_start(); + + return 0; + + case WDIOC_KEEPALIVE: + pnx833x_wdt_ping(); + return 0; + + case WDIOC_SETTIMEOUT: + { + if (get_user(new_timeout, (int *)arg)) + return -EFAULT; + + pnx833x_wdt_timeout = new_timeout; + PNX833X_REG(PNX833X_CONFIG + + PNX833X_CONFIG_CPU_WATCHDOG_COMPARE) = new_timeout; + return put_user(new_timeout, (int *)arg); + } + + case WDIOC_GETTIMEOUT: + timeout = PNX833X_REG(PNX833X_CONFIG + + PNX833X_CONFIG_CPU_WATCHDOG_COMPARE); + return put_user(timeout, (int *)arg); + + case WDIOC_GETTIMELEFT: + timeout_left = PNX833X_REG(PNX833X_CONFIG + + PNX833X_CONFIG_CPU_WATCHDOG); + return put_user(timeout_left, (int *)arg); + + } +} + +static int pnx833x_wdt_notify_sys(struct notifier_block *this, + unsigned long code, void *unused) +{ + if (code == SYS_DOWN || code == SYS_HALT) + pnx833x_wdt_stop(); /* Turn the WDT off */ + + return NOTIFY_DONE; +} + +static const struct file_operations pnx833x_wdt_fops = { + .owner = THIS_MODULE, + .llseek = no_llseek, + .write = pnx833x_wdt_write, + .unlocked_ioctl = pnx833x_wdt_ioctl, + .open = pnx833x_wdt_open, + .release = pnx833x_wdt_release, +}; + +static struct miscdevice pnx833x_wdt_miscdev = { + .minor = WATCHDOG_MINOR, + .name = "watchdog", + .fops = &pnx833x_wdt_fops, +}; + +static struct notifier_block pnx833x_wdt_notifier = { + .notifier_call = pnx833x_wdt_notify_sys, +}; + +static int __init watchdog_init(void) +{ + int ret, cause; + + /* Lets check the reason for the reset.*/ + cause = PNX833X_REG(PNX833X_RESET); + /*If bit 31 is set then watchdog was cause of reset.*/ + if (cause & 0x80000000) { + pr_info("The system was previously reset due to the watchdog firing - please investigate...\n"); + } + + ret = register_reboot_notifier(&pnx833x_wdt_notifier); + if (ret) { + pr_err("cannot register reboot notifier (err=%d)\n", ret); + return ret; + } + + ret = misc_register(&pnx833x_wdt_miscdev); + if (ret) { + pr_err("cannot register miscdev on minor=%d (err=%d)\n", + WATCHDOG_MINOR, ret); + unregister_reboot_notifier(&pnx833x_wdt_notifier); + return ret; + } + + pr_info("Hardware Watchdog Timer for PNX833x: Version 0.1\n"); + + if (start_enabled) + pnx833x_wdt_start(); + + return 0; +} + +static void __exit watchdog_exit(void) +{ + misc_deregister(&pnx833x_wdt_miscdev); + unregister_reboot_notifier(&pnx833x_wdt_notifier); +} + +module_init(watchdog_init); +module_exit(watchdog_exit); + +MODULE_AUTHOR("Daniel Laird/Andre McCurdy"); +MODULE_DESCRIPTION("Hardware Watchdog Device for PNX833x"); +MODULE_LICENSE("GPL"); diff --git a/drivers/watchdog/pretimeout_noop.c b/drivers/watchdog/pretimeout_noop.c new file mode 100644 index 000000000..85f5299d1 --- /dev/null +++ b/drivers/watchdog/pretimeout_noop.c @@ -0,0 +1,47 @@ +/* + * Copyright (C) 2015-2016 Mentor Graphics + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + */ + +#include <linux/module.h> +#include <linux/printk.h> +#include <linux/watchdog.h> + +#include "watchdog_pretimeout.h" + +/** + * pretimeout_noop - No operation on watchdog pretimeout event + * @wdd - watchdog_device + * + * This function prints a message about pretimeout to kernel log. + */ +static void pretimeout_noop(struct watchdog_device *wdd) +{ + pr_alert("watchdog%d: pretimeout event\n", wdd->id); +} + +static struct watchdog_governor watchdog_gov_noop = { + .name = "noop", + .pretimeout = pretimeout_noop, +}; + +static int __init watchdog_gov_noop_register(void) +{ + return watchdog_register_governor(&watchdog_gov_noop); +} + +static void __exit watchdog_gov_noop_unregister(void) +{ + watchdog_unregister_governor(&watchdog_gov_noop); +} +module_init(watchdog_gov_noop_register); +module_exit(watchdog_gov_noop_unregister); + +MODULE_AUTHOR("Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com>"); +MODULE_DESCRIPTION("Panic watchdog pretimeout governor"); +MODULE_LICENSE("GPL"); diff --git a/drivers/watchdog/pretimeout_panic.c b/drivers/watchdog/pretimeout_panic.c new file mode 100644 index 000000000..0c197a1c9 --- /dev/null +++ b/drivers/watchdog/pretimeout_panic.c @@ -0,0 +1,47 @@ +/* + * Copyright (C) 2015-2016 Mentor Graphics + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/watchdog.h> + +#include "watchdog_pretimeout.h" + +/** + * pretimeout_panic - Panic on watchdog pretimeout event + * @wdd - watchdog_device + * + * Panic, watchdog has not been fed till pretimeout event. + */ +static void pretimeout_panic(struct watchdog_device *wdd) +{ + panic("watchdog pretimeout event\n"); +} + +static struct watchdog_governor watchdog_gov_panic = { + .name = "panic", + .pretimeout = pretimeout_panic, +}; + +static int __init watchdog_gov_panic_register(void) +{ + return watchdog_register_governor(&watchdog_gov_panic); +} + +static void __exit watchdog_gov_panic_unregister(void) +{ + watchdog_unregister_governor(&watchdog_gov_panic); +} +module_init(watchdog_gov_panic_register); +module_exit(watchdog_gov_panic_unregister); + +MODULE_AUTHOR("Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com>"); +MODULE_DESCRIPTION("Panic watchdog pretimeout governor"); +MODULE_LICENSE("GPL"); diff --git a/drivers/watchdog/qcom-wdt.c b/drivers/watchdog/qcom-wdt.c new file mode 100644 index 000000000..1a0005a8f --- /dev/null +++ b/drivers/watchdog/qcom-wdt.c @@ -0,0 +1,267 @@ +/* Copyright (c) 2014, The Linux Foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/watchdog.h> +#include <linux/of_device.h> + +enum wdt_reg { + WDT_RST, + WDT_EN, + WDT_STS, + WDT_BARK_TIME, + WDT_BITE_TIME, +}; + +static const u32 reg_offset_data_apcs_tmr[] = { + [WDT_RST] = 0x38, + [WDT_EN] = 0x40, + [WDT_STS] = 0x44, + [WDT_BARK_TIME] = 0x4C, + [WDT_BITE_TIME] = 0x5C, +}; + +static const u32 reg_offset_data_kpss[] = { + [WDT_RST] = 0x4, + [WDT_EN] = 0x8, + [WDT_STS] = 0xC, + [WDT_BARK_TIME] = 0x10, + [WDT_BITE_TIME] = 0x14, +}; + +struct qcom_wdt { + struct watchdog_device wdd; + struct clk *clk; + unsigned long rate; + void __iomem *base; + const u32 *layout; +}; + +static void __iomem *wdt_addr(struct qcom_wdt *wdt, enum wdt_reg reg) +{ + return wdt->base + wdt->layout[reg]; +} + +static inline +struct qcom_wdt *to_qcom_wdt(struct watchdog_device *wdd) +{ + return container_of(wdd, struct qcom_wdt, wdd); +} + +static int qcom_wdt_start(struct watchdog_device *wdd) +{ + struct qcom_wdt *wdt = to_qcom_wdt(wdd); + + writel(0, wdt_addr(wdt, WDT_EN)); + writel(1, wdt_addr(wdt, WDT_RST)); + writel(wdd->timeout * wdt->rate, wdt_addr(wdt, WDT_BARK_TIME)); + writel(wdd->timeout * wdt->rate, wdt_addr(wdt, WDT_BITE_TIME)); + writel(1, wdt_addr(wdt, WDT_EN)); + return 0; +} + +static int qcom_wdt_stop(struct watchdog_device *wdd) +{ + struct qcom_wdt *wdt = to_qcom_wdt(wdd); + + writel(0, wdt_addr(wdt, WDT_EN)); + return 0; +} + +static int qcom_wdt_ping(struct watchdog_device *wdd) +{ + struct qcom_wdt *wdt = to_qcom_wdt(wdd); + + writel(1, wdt_addr(wdt, WDT_RST)); + return 0; +} + +static int qcom_wdt_set_timeout(struct watchdog_device *wdd, + unsigned int timeout) +{ + wdd->timeout = timeout; + return qcom_wdt_start(wdd); +} + +static int qcom_wdt_restart(struct watchdog_device *wdd, unsigned long action, + void *data) +{ + struct qcom_wdt *wdt = to_qcom_wdt(wdd); + u32 timeout; + + /* + * Trigger watchdog bite: + * Setup BITE_TIME to be 128ms, and enable WDT. + */ + timeout = 128 * wdt->rate / 1000; + + writel(0, wdt_addr(wdt, WDT_EN)); + writel(1, wdt_addr(wdt, WDT_RST)); + writel(timeout, wdt_addr(wdt, WDT_BARK_TIME)); + writel(timeout, wdt_addr(wdt, WDT_BITE_TIME)); + writel(1, wdt_addr(wdt, WDT_EN)); + + /* + * Actually make sure the above sequence hits hardware before sleeping. + */ + wmb(); + + mdelay(150); + return 0; +} + +static const struct watchdog_ops qcom_wdt_ops = { + .start = qcom_wdt_start, + .stop = qcom_wdt_stop, + .ping = qcom_wdt_ping, + .set_timeout = qcom_wdt_set_timeout, + .restart = qcom_wdt_restart, + .owner = THIS_MODULE, +}; + +static const struct watchdog_info qcom_wdt_info = { + .options = WDIOF_KEEPALIVEPING + | WDIOF_MAGICCLOSE + | WDIOF_SETTIMEOUT + | WDIOF_CARDRESET, + .identity = KBUILD_MODNAME, +}; + +static int qcom_wdt_probe(struct platform_device *pdev) +{ + struct qcom_wdt *wdt; + struct resource *res; + struct device_node *np = pdev->dev.of_node; + const u32 *regs; + u32 percpu_offset; + int ret; + + regs = of_device_get_match_data(&pdev->dev); + if (!regs) { + dev_err(&pdev->dev, "Unsupported QCOM WDT module\n"); + return -ENODEV; + } + + wdt = devm_kzalloc(&pdev->dev, sizeof(*wdt), GFP_KERNEL); + if (!wdt) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) + return -ENOMEM; + + /* We use CPU0's DGT for the watchdog */ + if (of_property_read_u32(np, "cpu-offset", &percpu_offset)) + percpu_offset = 0; + + res->start += percpu_offset; + res->end += percpu_offset; + + wdt->base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(wdt->base)) + return PTR_ERR(wdt->base); + + wdt->clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(wdt->clk)) { + dev_err(&pdev->dev, "failed to get input clock\n"); + return PTR_ERR(wdt->clk); + } + + ret = clk_prepare_enable(wdt->clk); + if (ret) { + dev_err(&pdev->dev, "failed to setup clock\n"); + return ret; + } + + /* + * We use the clock rate to calculate the max timeout, so ensure it's + * not zero to avoid a divide-by-zero exception. + * + * WATCHDOG_CORE assumes units of seconds, if the WDT is clocked such + * that it would bite before a second elapses it's usefulness is + * limited. Bail if this is the case. + */ + wdt->rate = clk_get_rate(wdt->clk); + if (wdt->rate == 0 || + wdt->rate > 0x10000000U) { + dev_err(&pdev->dev, "invalid clock rate\n"); + ret = -EINVAL; + goto err_clk_unprepare; + } + + wdt->wdd.info = &qcom_wdt_info; + wdt->wdd.ops = &qcom_wdt_ops; + wdt->wdd.min_timeout = 1; + wdt->wdd.max_timeout = 0x10000000U / wdt->rate; + wdt->wdd.parent = &pdev->dev; + wdt->layout = regs; + + if (readl(wdt_addr(wdt, WDT_STS)) & 1) + wdt->wdd.bootstatus = WDIOF_CARDRESET; + + /* + * If 'timeout-sec' unspecified in devicetree, assume a 30 second + * default, unless the max timeout is less than 30 seconds, then use + * the max instead. + */ + wdt->wdd.timeout = min(wdt->wdd.max_timeout, 30U); + watchdog_init_timeout(&wdt->wdd, 0, &pdev->dev); + + ret = watchdog_register_device(&wdt->wdd); + if (ret) { + dev_err(&pdev->dev, "failed to register watchdog\n"); + goto err_clk_unprepare; + } + + platform_set_drvdata(pdev, wdt); + return 0; + +err_clk_unprepare: + clk_disable_unprepare(wdt->clk); + return ret; +} + +static int qcom_wdt_remove(struct platform_device *pdev) +{ + struct qcom_wdt *wdt = platform_get_drvdata(pdev); + + watchdog_unregister_device(&wdt->wdd); + clk_disable_unprepare(wdt->clk); + return 0; +} + +static const struct of_device_id qcom_wdt_of_table[] = { + { .compatible = "qcom,kpss-timer", .data = reg_offset_data_apcs_tmr }, + { .compatible = "qcom,scss-timer", .data = reg_offset_data_apcs_tmr }, + { .compatible = "qcom,kpss-wdt", .data = reg_offset_data_kpss }, + { }, +}; +MODULE_DEVICE_TABLE(of, qcom_wdt_of_table); + +static struct platform_driver qcom_watchdog_driver = { + .probe = qcom_wdt_probe, + .remove = qcom_wdt_remove, + .driver = { + .name = KBUILD_MODNAME, + .of_match_table = qcom_wdt_of_table, + }, +}; +module_platform_driver(qcom_watchdog_driver); + +MODULE_DESCRIPTION("QCOM KPSS Watchdog Driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/watchdog/rave-sp-wdt.c b/drivers/watchdog/rave-sp-wdt.c new file mode 100644 index 000000000..35db17325 --- /dev/null +++ b/drivers/watchdog/rave-sp-wdt.c @@ -0,0 +1,337 @@ +// SPDX-License-Identifier: GPL-2.0+ + +/* + * Driver for watchdog aspect of for Zodiac Inflight Innovations RAVE + * Supervisory Processor(SP) MCU + * + * Copyright (C) 2017 Zodiac Inflight Innovation + * + */ + +#include <linux/delay.h> +#include <linux/kernel.h> +#include <linux/mfd/rave-sp.h> +#include <linux/module.h> +#include <linux/nvmem-consumer.h> +#include <linux/of_device.h> +#include <linux/platform_device.h> +#include <linux/reboot.h> +#include <linux/slab.h> +#include <linux/watchdog.h> + +enum { + RAVE_SP_RESET_BYTE = 1, + RAVE_SP_RESET_REASON_NORMAL = 0, + RAVE_SP_RESET_DELAY_MS = 500, +}; + +/** + * struct rave_sp_wdt_variant - RAVE SP watchdog variant + * + * @max_timeout: Largest possible watchdog timeout setting + * @min_timeout: Smallest possible watchdog timeout setting + * + * @configure: Function to send configuration command + * @restart: Function to send "restart" command + */ +struct rave_sp_wdt_variant { + unsigned int max_timeout; + unsigned int min_timeout; + + int (*configure)(struct watchdog_device *, bool); + int (*restart)(struct watchdog_device *); +}; + +/** + * struct rave_sp_wdt - RAVE SP watchdog + * + * @wdd: Underlying watchdog device + * @sp: Pointer to parent RAVE SP device + * @variant: Device specific variant information + * @reboot_notifier: Reboot notifier implementing machine reset + */ +struct rave_sp_wdt { + struct watchdog_device wdd; + struct rave_sp *sp; + const struct rave_sp_wdt_variant *variant; + struct notifier_block reboot_notifier; +}; + +static struct rave_sp_wdt *to_rave_sp_wdt(struct watchdog_device *wdd) +{ + return container_of(wdd, struct rave_sp_wdt, wdd); +} + +static int rave_sp_wdt_exec(struct watchdog_device *wdd, void *data, + size_t data_size) +{ + return rave_sp_exec(to_rave_sp_wdt(wdd)->sp, + data, data_size, NULL, 0); +} + +static int rave_sp_wdt_legacy_configure(struct watchdog_device *wdd, bool on) +{ + u8 cmd[] = { + [0] = RAVE_SP_CMD_SW_WDT, + [1] = 0, + [2] = 0, + [3] = on, + [4] = on ? wdd->timeout : 0, + }; + + return rave_sp_wdt_exec(wdd, cmd, sizeof(cmd)); +} + +static int rave_sp_wdt_rdu_configure(struct watchdog_device *wdd, bool on) +{ + u8 cmd[] = { + [0] = RAVE_SP_CMD_SW_WDT, + [1] = 0, + [2] = on, + [3] = (u8)wdd->timeout, + [4] = (u8)(wdd->timeout >> 8), + }; + + return rave_sp_wdt_exec(wdd, cmd, sizeof(cmd)); +} + +/** + * rave_sp_wdt_configure - Configure watchdog device + * + * @wdd: Device to configure + * @on: Desired state of the watchdog timer (ON/OFF) + * + * This function configures two aspects of the watchdog timer: + * + * - Wheither it is ON or OFF + * - Its timeout duration + * + * with first aspect specified via function argument and second via + * the value of 'wdd->timeout'. + */ +static int rave_sp_wdt_configure(struct watchdog_device *wdd, bool on) +{ + return to_rave_sp_wdt(wdd)->variant->configure(wdd, on); +} + +static int rave_sp_wdt_legacy_restart(struct watchdog_device *wdd) +{ + u8 cmd[] = { + [0] = RAVE_SP_CMD_RESET, + [1] = 0, + [2] = RAVE_SP_RESET_BYTE + }; + + return rave_sp_wdt_exec(wdd, cmd, sizeof(cmd)); +} + +static int rave_sp_wdt_rdu_restart(struct watchdog_device *wdd) +{ + u8 cmd[] = { + [0] = RAVE_SP_CMD_RESET, + [1] = 0, + [2] = RAVE_SP_RESET_BYTE, + [3] = RAVE_SP_RESET_REASON_NORMAL + }; + + return rave_sp_wdt_exec(wdd, cmd, sizeof(cmd)); +} + +static int rave_sp_wdt_reboot_notifier(struct notifier_block *nb, + unsigned long action, void *data) +{ + /* + * Restart handler is called in atomic context which means we + * can't communicate to SP via UART. Luckily for use SP will + * wait 500ms before actually resetting us, so we ask it to do + * so here and let the rest of the system go on wrapping + * things up. + */ + if (action == SYS_DOWN || action == SYS_HALT) { + struct rave_sp_wdt *sp_wd = + container_of(nb, struct rave_sp_wdt, reboot_notifier); + + const int ret = sp_wd->variant->restart(&sp_wd->wdd); + + if (ret < 0) + dev_err(sp_wd->wdd.parent, + "Failed to issue restart command (%d)", ret); + return NOTIFY_OK; + } + + return NOTIFY_DONE; +} + +static int rave_sp_wdt_restart(struct watchdog_device *wdd, + unsigned long action, void *data) +{ + /* + * The actual work was done by reboot notifier above. SP + * firmware waits 500 ms before issuing reset, so let's hang + * here for twice that delay and hopefuly we'd never reach + * the return statement. + */ + mdelay(2 * RAVE_SP_RESET_DELAY_MS); + + return -EIO; +} + +static int rave_sp_wdt_start(struct watchdog_device *wdd) +{ + int ret; + + ret = rave_sp_wdt_configure(wdd, true); + if (!ret) + set_bit(WDOG_HW_RUNNING, &wdd->status); + + return ret; +} + +static int rave_sp_wdt_stop(struct watchdog_device *wdd) +{ + return rave_sp_wdt_configure(wdd, false); +} + +static int rave_sp_wdt_set_timeout(struct watchdog_device *wdd, + unsigned int timeout) +{ + wdd->timeout = timeout; + + return rave_sp_wdt_configure(wdd, watchdog_active(wdd)); +} + +static int rave_sp_wdt_ping(struct watchdog_device *wdd) +{ + u8 cmd[] = { + [0] = RAVE_SP_CMD_PET_WDT, + [1] = 0, + }; + + return rave_sp_wdt_exec(wdd, cmd, sizeof(cmd)); +} + +static const struct watchdog_info rave_sp_wdt_info = { + .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE, + .identity = "RAVE SP Watchdog", +}; + +static const struct watchdog_ops rave_sp_wdt_ops = { + .owner = THIS_MODULE, + .start = rave_sp_wdt_start, + .stop = rave_sp_wdt_stop, + .ping = rave_sp_wdt_ping, + .set_timeout = rave_sp_wdt_set_timeout, + .restart = rave_sp_wdt_restart, +}; + +static const struct rave_sp_wdt_variant rave_sp_wdt_legacy = { + .max_timeout = 255, + .min_timeout = 1, + .configure = rave_sp_wdt_legacy_configure, + .restart = rave_sp_wdt_legacy_restart, +}; + +static const struct rave_sp_wdt_variant rave_sp_wdt_rdu = { + .max_timeout = 180, + .min_timeout = 60, + .configure = rave_sp_wdt_rdu_configure, + .restart = rave_sp_wdt_rdu_restart, +}; + +static const struct of_device_id rave_sp_wdt_of_match[] = { + { + .compatible = "zii,rave-sp-watchdog-legacy", + .data = &rave_sp_wdt_legacy, + }, + { + .compatible = "zii,rave-sp-watchdog", + .data = &rave_sp_wdt_rdu, + }, + { /* sentinel */ } +}; + +static int rave_sp_wdt_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct watchdog_device *wdd; + struct rave_sp_wdt *sp_wd; + struct nvmem_cell *cell; + __le16 timeout = 0; + int ret; + + sp_wd = devm_kzalloc(dev, sizeof(*sp_wd), GFP_KERNEL); + if (!sp_wd) + return -ENOMEM; + + sp_wd->variant = of_device_get_match_data(dev); + sp_wd->sp = dev_get_drvdata(dev->parent); + + wdd = &sp_wd->wdd; + wdd->parent = dev; + wdd->info = &rave_sp_wdt_info; + wdd->ops = &rave_sp_wdt_ops; + wdd->min_timeout = sp_wd->variant->min_timeout; + wdd->max_timeout = sp_wd->variant->max_timeout; + wdd->status = WATCHDOG_NOWAYOUT_INIT_STATUS; + wdd->timeout = 60; + + cell = nvmem_cell_get(dev, "wdt-timeout"); + if (!IS_ERR(cell)) { + size_t len; + void *value = nvmem_cell_read(cell, &len); + + if (!IS_ERR(value)) { + memcpy(&timeout, value, min(len, sizeof(timeout))); + kfree(value); + } + nvmem_cell_put(cell); + } + watchdog_init_timeout(wdd, le16_to_cpu(timeout), dev); + watchdog_set_restart_priority(wdd, 255); + watchdog_stop_on_unregister(wdd); + + sp_wd->reboot_notifier.notifier_call = rave_sp_wdt_reboot_notifier; + ret = devm_register_reboot_notifier(dev, &sp_wd->reboot_notifier); + if (ret) { + dev_err(dev, "Failed to register reboot notifier\n"); + return ret; + } + + /* + * We don't know if watchdog is running now. To be sure, let's + * start it and depend on watchdog core to ping it + */ + wdd->max_hw_heartbeat_ms = wdd->max_timeout * 1000; + ret = rave_sp_wdt_start(wdd); + if (ret) { + dev_err(dev, "Watchdog didn't start\n"); + return ret; + } + + ret = devm_watchdog_register_device(dev, wdd); + if (ret) { + dev_err(dev, "Failed to register watchdog device\n"); + rave_sp_wdt_stop(wdd); + return ret; + } + + return 0; +} + +static struct platform_driver rave_sp_wdt_driver = { + .probe = rave_sp_wdt_probe, + .driver = { + .name = KBUILD_MODNAME, + .of_match_table = rave_sp_wdt_of_match, + }, +}; + +module_platform_driver(rave_sp_wdt_driver); + +MODULE_DEVICE_TABLE(of, rave_sp_wdt_of_match); +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Andrey Vostrikov <andrey.vostrikov@cogentembedded.com>"); +MODULE_AUTHOR("Nikita Yushchenko <nikita.yoush@cogentembedded.com>"); +MODULE_AUTHOR("Andrey Smirnov <andrew.smirnov@gmail.com>"); +MODULE_DESCRIPTION("RAVE SP Watchdog driver"); +MODULE_ALIAS("platform:rave-sp-watchdog"); diff --git a/drivers/watchdog/rc32434_wdt.c b/drivers/watchdog/rc32434_wdt.c new file mode 100644 index 000000000..3a75f3b53 --- /dev/null +++ b/drivers/watchdog/rc32434_wdt.c @@ -0,0 +1,330 @@ +/* + * IDT Interprise 79RC32434 watchdog driver + * + * Copyright (C) 2006, Ondrej Zajicek <santiago@crfreenet.org> + * Copyright (C) 2008, Florian Fainelli <florian@openwrt.org> + * + * based on + * SoftDog 0.05: A Software Watchdog Device + * + * (c) Copyright 1996 Alan Cox <alan@lxorguk.ukuu.org.uk>, + * All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/module.h> /* For module specific items */ +#include <linux/moduleparam.h> /* For new moduleparam's */ +#include <linux/types.h> /* For standard types (like size_t) */ +#include <linux/errno.h> /* For the -ENODEV/... values */ +#include <linux/kernel.h> /* For printk/panic/... */ +#include <linux/fs.h> /* For file operations */ +#include <linux/miscdevice.h> /* For struct miscdevice */ +#include <linux/watchdog.h> /* For the watchdog specific items */ +#include <linux/init.h> /* For __init/__exit/... */ +#include <linux/platform_device.h> /* For platform_driver framework */ +#include <linux/spinlock.h> /* For spin_lock/spin_unlock/... */ +#include <linux/uaccess.h> /* For copy_to_user/put_user/... */ +#include <linux/io.h> /* For devm_ioremap_nocache */ + +#include <asm/mach-rc32434/integ.h> /* For the Watchdog registers */ + +#define VERSION "1.0" + +static struct { + unsigned long inuse; + spinlock_t io_lock; +} rc32434_wdt_device; + +static struct integ __iomem *wdt_reg; + +static int expect_close; + +/* Board internal clock speed in Hz, + * the watchdog timer ticks at. */ +extern unsigned int idt_cpu_freq; + +/* translate wtcompare value to seconds and vice versa */ +#define WTCOMP2SEC(x) (x / idt_cpu_freq) +#define SEC2WTCOMP(x) (x * idt_cpu_freq) + +/* Use a default timeout of 20s. This should be + * safe for CPU clock speeds up to 400MHz, as + * ((2 ^ 32) - 1) / (400MHz / 2) = 21s. */ +#define WATCHDOG_TIMEOUT 20 + +static int timeout = WATCHDOG_TIMEOUT; +module_param(timeout, int, 0); +MODULE_PARM_DESC(timeout, "Watchdog timeout value, in seconds (default=" + __MODULE_STRING(WATCHDOG_TIMEOUT) ")"); + +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); +MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); + +/* apply or and nand masks to data read from addr and write back */ +#define SET_BITS(addr, or, nand) \ + writel((readl(&addr) | or) & ~nand, &addr) + +static int rc32434_wdt_set(int new_timeout) +{ + int max_to = WTCOMP2SEC((u32)-1); + + if (new_timeout < 0 || new_timeout > max_to) { + pr_err("timeout value must be between 0 and %d\n", max_to); + return -EINVAL; + } + timeout = new_timeout; + spin_lock(&rc32434_wdt_device.io_lock); + writel(SEC2WTCOMP(timeout), &wdt_reg->wtcompare); + spin_unlock(&rc32434_wdt_device.io_lock); + + return 0; +} + +static void rc32434_wdt_start(void) +{ + u32 or, nand; + + spin_lock(&rc32434_wdt_device.io_lock); + + /* zero the counter before enabling */ + writel(0, &wdt_reg->wtcount); + + /* don't generate a non-maskable interrupt, + * do a warm reset instead */ + nand = 1 << RC32434_ERR_WNE; + or = 1 << RC32434_ERR_WRE; + + /* reset the ERRCS timeout bit in case it's set */ + nand |= 1 << RC32434_ERR_WTO; + + SET_BITS(wdt_reg->errcs, or, nand); + + /* set the timeout (either default or based on module param) */ + rc32434_wdt_set(timeout); + + /* reset WTC timeout bit and enable WDT */ + nand = 1 << RC32434_WTC_TO; + or = 1 << RC32434_WTC_EN; + + SET_BITS(wdt_reg->wtc, or, nand); + + spin_unlock(&rc32434_wdt_device.io_lock); + pr_info("Started watchdog timer\n"); +} + +static void rc32434_wdt_stop(void) +{ + spin_lock(&rc32434_wdt_device.io_lock); + + /* Disable WDT */ + SET_BITS(wdt_reg->wtc, 0, 1 << RC32434_WTC_EN); + + spin_unlock(&rc32434_wdt_device.io_lock); + pr_info("Stopped watchdog timer\n"); +} + +static void rc32434_wdt_ping(void) +{ + spin_lock(&rc32434_wdt_device.io_lock); + writel(0, &wdt_reg->wtcount); + spin_unlock(&rc32434_wdt_device.io_lock); +} + +static int rc32434_wdt_open(struct inode *inode, struct file *file) +{ + if (test_and_set_bit(0, &rc32434_wdt_device.inuse)) + return -EBUSY; + + if (nowayout) + __module_get(THIS_MODULE); + + rc32434_wdt_start(); + rc32434_wdt_ping(); + + return nonseekable_open(inode, file); +} + +static int rc32434_wdt_release(struct inode *inode, struct file *file) +{ + if (expect_close == 42) { + rc32434_wdt_stop(); + module_put(THIS_MODULE); + } else { + pr_crit("device closed unexpectedly. WDT will not stop!\n"); + rc32434_wdt_ping(); + } + clear_bit(0, &rc32434_wdt_device.inuse); + return 0; +} + +static ssize_t rc32434_wdt_write(struct file *file, const char *data, + size_t len, loff_t *ppos) +{ + if (len) { + if (!nowayout) { + size_t i; + + /* In case it was set long ago */ + expect_close = 0; + + for (i = 0; i != len; i++) { + char c; + if (get_user(c, data + i)) + return -EFAULT; + if (c == 'V') + expect_close = 42; + } + } + rc32434_wdt_ping(); + return len; + } + return 0; +} + +static long rc32434_wdt_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) +{ + void __user *argp = (void __user *)arg; + int new_timeout; + unsigned int value; + static const struct watchdog_info ident = { + .options = WDIOF_SETTIMEOUT | + WDIOF_KEEPALIVEPING | + WDIOF_MAGICCLOSE, + .identity = "RC32434_WDT Watchdog", + }; + switch (cmd) { + case WDIOC_GETSUPPORT: + if (copy_to_user(argp, &ident, sizeof(ident))) + return -EFAULT; + break; + case WDIOC_GETSTATUS: + case WDIOC_GETBOOTSTATUS: + value = 0; + if (copy_to_user(argp, &value, sizeof(int))) + return -EFAULT; + break; + case WDIOC_SETOPTIONS: + if (copy_from_user(&value, argp, sizeof(int))) + return -EFAULT; + switch (value) { + case WDIOS_ENABLECARD: + rc32434_wdt_start(); + break; + case WDIOS_DISABLECARD: + rc32434_wdt_stop(); + break; + default: + return -EINVAL; + } + break; + case WDIOC_KEEPALIVE: + rc32434_wdt_ping(); + break; + case WDIOC_SETTIMEOUT: + if (copy_from_user(&new_timeout, argp, sizeof(int))) + return -EFAULT; + if (rc32434_wdt_set(new_timeout)) + return -EINVAL; + /* Fall through */ + case WDIOC_GETTIMEOUT: + return copy_to_user(argp, &timeout, sizeof(int)) ? -EFAULT : 0; + default: + return -ENOTTY; + } + + return 0; +} + +static const struct file_operations rc32434_wdt_fops = { + .owner = THIS_MODULE, + .llseek = no_llseek, + .write = rc32434_wdt_write, + .unlocked_ioctl = rc32434_wdt_ioctl, + .open = rc32434_wdt_open, + .release = rc32434_wdt_release, +}; + +static struct miscdevice rc32434_wdt_miscdev = { + .minor = WATCHDOG_MINOR, + .name = "watchdog", + .fops = &rc32434_wdt_fops, +}; + +static int rc32434_wdt_probe(struct platform_device *pdev) +{ + int ret; + struct resource *r; + + r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "rb532_wdt_res"); + if (!r) { + pr_err("failed to retrieve resources\n"); + return -ENODEV; + } + + wdt_reg = devm_ioremap_nocache(&pdev->dev, r->start, resource_size(r)); + if (!wdt_reg) { + pr_err("failed to remap I/O resources\n"); + return -ENXIO; + } + + spin_lock_init(&rc32434_wdt_device.io_lock); + + /* Make sure the watchdog is not running */ + rc32434_wdt_stop(); + + /* Check that the heartbeat value is within it's range; + * if not reset to the default */ + if (rc32434_wdt_set(timeout)) { + rc32434_wdt_set(WATCHDOG_TIMEOUT); + pr_info("timeout value must be between 0 and %d\n", + WTCOMP2SEC((u32)-1)); + } + + ret = misc_register(&rc32434_wdt_miscdev); + if (ret < 0) { + pr_err("failed to register watchdog device\n"); + return ret; + } + + pr_info("Watchdog Timer version " VERSION ", timer margin: %d sec\n", + timeout); + + return 0; +} + +static int rc32434_wdt_remove(struct platform_device *pdev) +{ + misc_deregister(&rc32434_wdt_miscdev); + return 0; +} + +static void rc32434_wdt_shutdown(struct platform_device *pdev) +{ + rc32434_wdt_stop(); +} + +static struct platform_driver rc32434_wdt_driver = { + .probe = rc32434_wdt_probe, + .remove = rc32434_wdt_remove, + .shutdown = rc32434_wdt_shutdown, + .driver = { + .name = "rc32434_wdt", + } +}; + +module_platform_driver(rc32434_wdt_driver); + +MODULE_AUTHOR("Ondrej Zajicek <santiago@crfreenet.org>," + "Florian Fainelli <florian@openwrt.org>"); +MODULE_DESCRIPTION("Driver for the IDT RC32434 SoC watchdog"); +MODULE_LICENSE("GPL"); diff --git a/drivers/watchdog/rdc321x_wdt.c b/drivers/watchdog/rdc321x_wdt.c new file mode 100644 index 000000000..4c3b4ea4e --- /dev/null +++ b/drivers/watchdog/rdc321x_wdt.c @@ -0,0 +1,297 @@ +/* + * RDC321x watchdog driver + * + * Copyright (C) 2007-2010 Florian Fainelli <florian@openwrt.org> + * + * This driver is highly inspired from the cpu5_wdt driver + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/types.h> +#include <linux/errno.h> +#include <linux/miscdevice.h> +#include <linux/fs.h> +#include <linux/ioport.h> +#include <linux/timer.h> +#include <linux/completion.h> +#include <linux/jiffies.h> +#include <linux/platform_device.h> +#include <linux/watchdog.h> +#include <linux/io.h> +#include <linux/uaccess.h> +#include <linux/mfd/rdc321x.h> + +#define RDC_WDT_MASK 0x80000000 /* Mask */ +#define RDC_WDT_EN 0x00800000 /* Enable bit */ +#define RDC_WDT_WTI 0x00200000 /* Generate CPU reset/NMI/WDT on timeout */ +#define RDC_WDT_RST 0x00100000 /* Reset bit */ +#define RDC_WDT_WIF 0x00040000 /* WDT IRQ Flag */ +#define RDC_WDT_IRT 0x00000100 /* IRQ Routing table */ +#define RDC_WDT_CNT 0x00000001 /* WDT count */ + +#define RDC_CLS_TMR 0x80003844 /* Clear timer */ + +#define RDC_WDT_INTERVAL (HZ/10+1) + +static int ticks = 1000; + +/* some device data */ + +static struct { + struct completion stop; + int running; + struct timer_list timer; + int queue; + int default_ticks; + unsigned long inuse; + spinlock_t lock; + struct pci_dev *sb_pdev; + int base_reg; +} rdc321x_wdt_device; + +/* generic helper functions */ + +static void rdc321x_wdt_trigger(struct timer_list *unused) +{ + unsigned long flags; + u32 val; + + if (rdc321x_wdt_device.running) + ticks--; + + /* keep watchdog alive */ + spin_lock_irqsave(&rdc321x_wdt_device.lock, flags); + pci_read_config_dword(rdc321x_wdt_device.sb_pdev, + rdc321x_wdt_device.base_reg, &val); + val |= RDC_WDT_EN; + pci_write_config_dword(rdc321x_wdt_device.sb_pdev, + rdc321x_wdt_device.base_reg, val); + spin_unlock_irqrestore(&rdc321x_wdt_device.lock, flags); + + /* requeue?? */ + if (rdc321x_wdt_device.queue && ticks) + mod_timer(&rdc321x_wdt_device.timer, + jiffies + RDC_WDT_INTERVAL); + else { + /* ticks doesn't matter anyway */ + complete(&rdc321x_wdt_device.stop); + } + +} + +static void rdc321x_wdt_reset(void) +{ + ticks = rdc321x_wdt_device.default_ticks; +} + +static void rdc321x_wdt_start(void) +{ + unsigned long flags; + + if (!rdc321x_wdt_device.queue) { + rdc321x_wdt_device.queue = 1; + + /* Clear the timer */ + spin_lock_irqsave(&rdc321x_wdt_device.lock, flags); + pci_write_config_dword(rdc321x_wdt_device.sb_pdev, + rdc321x_wdt_device.base_reg, RDC_CLS_TMR); + + /* Enable watchdog and set the timeout to 81.92 us */ + pci_write_config_dword(rdc321x_wdt_device.sb_pdev, + rdc321x_wdt_device.base_reg, + RDC_WDT_EN | RDC_WDT_CNT); + spin_unlock_irqrestore(&rdc321x_wdt_device.lock, flags); + + mod_timer(&rdc321x_wdt_device.timer, + jiffies + RDC_WDT_INTERVAL); + } + + /* if process dies, counter is not decremented */ + rdc321x_wdt_device.running++; +} + +static int rdc321x_wdt_stop(void) +{ + if (rdc321x_wdt_device.running) + rdc321x_wdt_device.running = 0; + + ticks = rdc321x_wdt_device.default_ticks; + + return -EIO; +} + +/* filesystem operations */ +static int rdc321x_wdt_open(struct inode *inode, struct file *file) +{ + if (test_and_set_bit(0, &rdc321x_wdt_device.inuse)) + return -EBUSY; + + return nonseekable_open(inode, file); +} + +static int rdc321x_wdt_release(struct inode *inode, struct file *file) +{ + clear_bit(0, &rdc321x_wdt_device.inuse); + return 0; +} + +static long rdc321x_wdt_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) +{ + void __user *argp = (void __user *)arg; + u32 value; + static const struct watchdog_info ident = { + .options = WDIOF_CARDRESET, + .identity = "RDC321x WDT", + }; + unsigned long flags; + + switch (cmd) { + case WDIOC_KEEPALIVE: + rdc321x_wdt_reset(); + break; + case WDIOC_GETSTATUS: + /* Read the value from the DATA register */ + spin_lock_irqsave(&rdc321x_wdt_device.lock, flags); + pci_read_config_dword(rdc321x_wdt_device.sb_pdev, + rdc321x_wdt_device.base_reg, &value); + spin_unlock_irqrestore(&rdc321x_wdt_device.lock, flags); + if (copy_to_user(argp, &value, sizeof(u32))) + return -EFAULT; + break; + case WDIOC_GETSUPPORT: + if (copy_to_user(argp, &ident, sizeof(ident))) + return -EFAULT; + break; + case WDIOC_SETOPTIONS: + if (copy_from_user(&value, argp, sizeof(int))) + return -EFAULT; + switch (value) { + case WDIOS_ENABLECARD: + rdc321x_wdt_start(); + break; + case WDIOS_DISABLECARD: + return rdc321x_wdt_stop(); + default: + return -EINVAL; + } + break; + default: + return -ENOTTY; + } + return 0; +} + +static ssize_t rdc321x_wdt_write(struct file *file, const char __user *buf, + size_t count, loff_t *ppos) +{ + if (!count) + return -EIO; + + rdc321x_wdt_reset(); + + return count; +} + +static const struct file_operations rdc321x_wdt_fops = { + .owner = THIS_MODULE, + .llseek = no_llseek, + .unlocked_ioctl = rdc321x_wdt_ioctl, + .open = rdc321x_wdt_open, + .write = rdc321x_wdt_write, + .release = rdc321x_wdt_release, +}; + +static struct miscdevice rdc321x_wdt_misc = { + .minor = WATCHDOG_MINOR, + .name = "watchdog", + .fops = &rdc321x_wdt_fops, +}; + +static int rdc321x_wdt_probe(struct platform_device *pdev) +{ + int err; + struct resource *r; + struct rdc321x_wdt_pdata *pdata; + + pdata = dev_get_platdata(&pdev->dev); + if (!pdata) { + dev_err(&pdev->dev, "no platform data supplied\n"); + return -ENODEV; + } + + r = platform_get_resource_byname(pdev, IORESOURCE_IO, "wdt-reg"); + if (!r) { + dev_err(&pdev->dev, "failed to get wdt-reg resource\n"); + return -ENODEV; + } + + rdc321x_wdt_device.sb_pdev = pdata->sb_pdev; + rdc321x_wdt_device.base_reg = r->start; + rdc321x_wdt_device.queue = 0; + rdc321x_wdt_device.default_ticks = ticks; + + err = misc_register(&rdc321x_wdt_misc); + if (err < 0) { + dev_err(&pdev->dev, "misc_register failed\n"); + return err; + } + + spin_lock_init(&rdc321x_wdt_device.lock); + + /* Reset the watchdog */ + pci_write_config_dword(rdc321x_wdt_device.sb_pdev, + rdc321x_wdt_device.base_reg, RDC_WDT_RST); + + init_completion(&rdc321x_wdt_device.stop); + + clear_bit(0, &rdc321x_wdt_device.inuse); + + timer_setup(&rdc321x_wdt_device.timer, rdc321x_wdt_trigger, 0); + + dev_info(&pdev->dev, "watchdog init success\n"); + + return 0; +} + +static int rdc321x_wdt_remove(struct platform_device *pdev) +{ + if (rdc321x_wdt_device.queue) { + rdc321x_wdt_device.queue = 0; + wait_for_completion(&rdc321x_wdt_device.stop); + } + + misc_deregister(&rdc321x_wdt_misc); + + return 0; +} + +static struct platform_driver rdc321x_wdt_driver = { + .probe = rdc321x_wdt_probe, + .remove = rdc321x_wdt_remove, + .driver = { + .name = "rdc321x-wdt", + }, +}; + +module_platform_driver(rdc321x_wdt_driver); + +MODULE_AUTHOR("Florian Fainelli <florian@openwrt.org>"); +MODULE_DESCRIPTION("RDC321x watchdog driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/watchdog/renesas_wdt.c b/drivers/watchdog/renesas_wdt.c new file mode 100644 index 000000000..62d9d3edc --- /dev/null +++ b/drivers/watchdog/renesas_wdt.c @@ -0,0 +1,314 @@ +/* + * Watchdog driver for Renesas WDT watchdog + * + * Copyright (C) 2015-17 Wolfram Sang, Sang Engineering <wsa@sang-engineering.com> + * Copyright (C) 2015-17 Renesas Electronics Corporation + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + */ +#include <linux/bitops.h> +#include <linux/clk.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/pm_runtime.h> +#include <linux/smp.h> +#include <linux/sys_soc.h> +#include <linux/watchdog.h> + +#define RWTCNT 0 +#define RWTCSRA 4 +#define RWTCSRA_WOVF BIT(4) +#define RWTCSRA_WRFLG BIT(5) +#define RWTCSRA_TME BIT(7) +#define RWTCSRB 8 + +#define RWDT_DEFAULT_TIMEOUT 60U + +/* + * In probe, clk_rate is checked to be not more than 16 bit * biggest clock + * divider (12 bits). d is only a factor to fully utilize the WDT counter and + * will not exceed its 16 bits. Thus, no overflow, we stay below 32 bits. + */ +#define MUL_BY_CLKS_PER_SEC(p, d) \ + DIV_ROUND_UP((d) * (p)->clk_rate, clk_divs[(p)->cks]) + +/* d is 16 bit, clk_divs 12 bit -> no 32 bit overflow */ +#define DIV_BY_CLKS_PER_SEC(p, d) ((d) * clk_divs[(p)->cks] / (p)->clk_rate) + +static const unsigned int clk_divs[] = { 1, 4, 16, 32, 64, 128, 1024, 4096 }; + +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); +MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); + +struct rwdt_priv { + void __iomem *base; + struct watchdog_device wdev; + unsigned long clk_rate; + u16 time_left; + u8 cks; +}; + +static void rwdt_write(struct rwdt_priv *priv, u32 val, unsigned int reg) +{ + if (reg == RWTCNT) + val |= 0x5a5a0000; + else + val |= 0xa5a5a500; + + writel_relaxed(val, priv->base + reg); +} + +static int rwdt_init_timeout(struct watchdog_device *wdev) +{ + struct rwdt_priv *priv = watchdog_get_drvdata(wdev); + + rwdt_write(priv, 65536 - MUL_BY_CLKS_PER_SEC(priv, wdev->timeout), RWTCNT); + + return 0; +} + +static int rwdt_start(struct watchdog_device *wdev) +{ + struct rwdt_priv *priv = watchdog_get_drvdata(wdev); + u8 val; + + pm_runtime_get_sync(wdev->parent); + + /* Stop the timer before we modify any register */ + val = readb_relaxed(priv->base + RWTCSRA) & ~RWTCSRA_TME; + rwdt_write(priv, val, RWTCSRA); + + rwdt_init_timeout(wdev); + rwdt_write(priv, priv->cks, RWTCSRA); + rwdt_write(priv, 0, RWTCSRB); + + while (readb_relaxed(priv->base + RWTCSRA) & RWTCSRA_WRFLG) + cpu_relax(); + + rwdt_write(priv, priv->cks | RWTCSRA_TME, RWTCSRA); + + return 0; +} + +static int rwdt_stop(struct watchdog_device *wdev) +{ + struct rwdt_priv *priv = watchdog_get_drvdata(wdev); + + rwdt_write(priv, priv->cks, RWTCSRA); + pm_runtime_put(wdev->parent); + + return 0; +} + +static unsigned int rwdt_get_timeleft(struct watchdog_device *wdev) +{ + struct rwdt_priv *priv = watchdog_get_drvdata(wdev); + u16 val = readw_relaxed(priv->base + RWTCNT); + + return DIV_BY_CLKS_PER_SEC(priv, 65536 - val); +} + +static int rwdt_restart(struct watchdog_device *wdev, unsigned long action, + void *data) +{ + struct rwdt_priv *priv = watchdog_get_drvdata(wdev); + + rwdt_start(wdev); + rwdt_write(priv, 0xffff, RWTCNT); + return 0; +} + +static const struct watchdog_info rwdt_ident = { + .options = WDIOF_MAGICCLOSE | WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT | + WDIOF_CARDRESET, + .identity = "Renesas WDT Watchdog", +}; + +static const struct watchdog_ops rwdt_ops = { + .owner = THIS_MODULE, + .start = rwdt_start, + .stop = rwdt_stop, + .ping = rwdt_init_timeout, + .get_timeleft = rwdt_get_timeleft, + .restart = rwdt_restart, +}; + +#if defined(CONFIG_ARCH_RCAR_GEN2) && defined(CONFIG_SMP) +/* + * Watchdog-reset integration is broken on early revisions of R-Car Gen2 SoCs + */ +static const struct soc_device_attribute rwdt_quirks_match[] = { + { + .soc_id = "r8a7790", + .revision = "ES1.*", + .data = (void *)1, /* needs single CPU */ + }, { + .soc_id = "r8a7791", + .revision = "ES1.*", + .data = (void *)1, /* needs single CPU */ + }, { + .soc_id = "r8a7792", + .revision = "*", + .data = (void *)0, /* needs SMP disabled */ + }, + { /* sentinel */ } +}; + +static bool rwdt_blacklisted(struct device *dev) +{ + const struct soc_device_attribute *attr; + + attr = soc_device_match(rwdt_quirks_match); + if (attr && setup_max_cpus > (uintptr_t)attr->data) { + dev_info(dev, "Watchdog blacklisted on %s %s\n", attr->soc_id, + attr->revision); + return true; + } + + return false; +} +#else /* !CONFIG_ARCH_RCAR_GEN2 || !CONFIG_SMP */ +static inline bool rwdt_blacklisted(struct device *dev) { return false; } +#endif /* !CONFIG_ARCH_RCAR_GEN2 || !CONFIG_SMP */ + +static int rwdt_probe(struct platform_device *pdev) +{ + struct rwdt_priv *priv; + struct resource *res; + struct clk *clk; + unsigned long clks_per_sec; + int ret, i; + + if (rwdt_blacklisted(&pdev->dev)) + return -ENODEV; + + priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + priv->base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(priv->base)) + return PTR_ERR(priv->base); + + clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(clk)) + return PTR_ERR(clk); + + pm_runtime_enable(&pdev->dev); + pm_runtime_get_sync(&pdev->dev); + priv->clk_rate = clk_get_rate(clk); + priv->wdev.bootstatus = (readb_relaxed(priv->base + RWTCSRA) & + RWTCSRA_WOVF) ? WDIOF_CARDRESET : 0; + pm_runtime_put(&pdev->dev); + + if (!priv->clk_rate) { + ret = -ENOENT; + goto out_pm_disable; + } + + for (i = ARRAY_SIZE(clk_divs) - 1; i >= 0; i--) { + clks_per_sec = priv->clk_rate / clk_divs[i]; + if (clks_per_sec && clks_per_sec < 65536) { + priv->cks = i; + break; + } + } + + if (i < 0) { + dev_err(&pdev->dev, "Can't find suitable clock divider\n"); + ret = -ERANGE; + goto out_pm_disable; + } + + priv->wdev.info = &rwdt_ident, + priv->wdev.ops = &rwdt_ops, + priv->wdev.parent = &pdev->dev; + priv->wdev.min_timeout = 1; + priv->wdev.max_timeout = DIV_BY_CLKS_PER_SEC(priv, 65536); + priv->wdev.timeout = min(priv->wdev.max_timeout, RWDT_DEFAULT_TIMEOUT); + + platform_set_drvdata(pdev, priv); + watchdog_set_drvdata(&priv->wdev, priv); + watchdog_set_nowayout(&priv->wdev, nowayout); + watchdog_set_restart_priority(&priv->wdev, 0); + watchdog_stop_on_unregister(&priv->wdev); + + /* This overrides the default timeout only if DT configuration was found */ + ret = watchdog_init_timeout(&priv->wdev, 0, &pdev->dev); + if (ret) + dev_warn(&pdev->dev, "Specified timeout value invalid, using default\n"); + + ret = watchdog_register_device(&priv->wdev); + if (ret < 0) + goto out_pm_disable; + + return 0; + + out_pm_disable: + pm_runtime_disable(&pdev->dev); + return ret; +} + +static int rwdt_remove(struct platform_device *pdev) +{ + struct rwdt_priv *priv = platform_get_drvdata(pdev); + + watchdog_unregister_device(&priv->wdev); + pm_runtime_disable(&pdev->dev); + + return 0; +} + +static int __maybe_unused rwdt_suspend(struct device *dev) +{ + struct rwdt_priv *priv = dev_get_drvdata(dev); + + if (watchdog_active(&priv->wdev)) { + priv->time_left = readw(priv->base + RWTCNT); + rwdt_stop(&priv->wdev); + } + return 0; +} + +static int __maybe_unused rwdt_resume(struct device *dev) +{ + struct rwdt_priv *priv = dev_get_drvdata(dev); + + if (watchdog_active(&priv->wdev)) { + rwdt_start(&priv->wdev); + rwdt_write(priv, priv->time_left, RWTCNT); + } + return 0; +} + +static SIMPLE_DEV_PM_OPS(rwdt_pm_ops, rwdt_suspend, rwdt_resume); + +static const struct of_device_id rwdt_ids[] = { + { .compatible = "renesas,rcar-gen2-wdt", }, + { .compatible = "renesas,rcar-gen3-wdt", }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, rwdt_ids); + +static struct platform_driver rwdt_driver = { + .driver = { + .name = "renesas_wdt", + .of_match_table = rwdt_ids, + .pm = &rwdt_pm_ops, + }, + .probe = rwdt_probe, + .remove = rwdt_remove, +}; +module_platform_driver(rwdt_driver); + +MODULE_DESCRIPTION("Renesas WDT Watchdog Driver"); +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Wolfram Sang <wsa@sang-engineering.com>"); diff --git a/drivers/watchdog/retu_wdt.c b/drivers/watchdog/retu_wdt.c new file mode 100644 index 000000000..39cd51df2 --- /dev/null +++ b/drivers/watchdog/retu_wdt.c @@ -0,0 +1,178 @@ +/* + * Retu watchdog driver + * + * Copyright (C) 2004, 2005 Nokia Corporation + * + * Based on code written by Amit Kucheria and Michael Buesch. + * Rewritten by Aaro Koskinen. + * + * This file is subject to the terms and conditions of the GNU General + * Public License. See the file "COPYING" in the main directory of this + * archive for more details. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/slab.h> +#include <linux/errno.h> +#include <linux/device.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/mfd/retu.h> +#include <linux/watchdog.h> +#include <linux/platform_device.h> + +/* Watchdog timer values in seconds */ +#define RETU_WDT_MAX_TIMER 63 + +struct retu_wdt_dev { + struct retu_dev *rdev; + struct device *dev; + struct delayed_work ping_work; +}; + +/* + * Since Retu watchdog cannot be disabled in hardware, we must kick it + * with a timer until userspace watchdog software takes over. If + * CONFIG_WATCHDOG_NOWAYOUT is set, we never start the feeding. + */ +static void retu_wdt_ping_enable(struct retu_wdt_dev *wdev) +{ + retu_write(wdev->rdev, RETU_REG_WATCHDOG, RETU_WDT_MAX_TIMER); + schedule_delayed_work(&wdev->ping_work, + round_jiffies_relative(RETU_WDT_MAX_TIMER * HZ / 2)); +} + +static void retu_wdt_ping_disable(struct retu_wdt_dev *wdev) +{ + retu_write(wdev->rdev, RETU_REG_WATCHDOG, RETU_WDT_MAX_TIMER); + cancel_delayed_work_sync(&wdev->ping_work); +} + +static void retu_wdt_ping_work(struct work_struct *work) +{ + struct retu_wdt_dev *wdev = container_of(to_delayed_work(work), + struct retu_wdt_dev, ping_work); + retu_wdt_ping_enable(wdev); +} + +static int retu_wdt_start(struct watchdog_device *wdog) +{ + struct retu_wdt_dev *wdev = watchdog_get_drvdata(wdog); + + retu_wdt_ping_disable(wdev); + + return retu_write(wdev->rdev, RETU_REG_WATCHDOG, wdog->timeout); +} + +static int retu_wdt_stop(struct watchdog_device *wdog) +{ + struct retu_wdt_dev *wdev = watchdog_get_drvdata(wdog); + + retu_wdt_ping_enable(wdev); + + return 0; +} + +static int retu_wdt_ping(struct watchdog_device *wdog) +{ + struct retu_wdt_dev *wdev = watchdog_get_drvdata(wdog); + + return retu_write(wdev->rdev, RETU_REG_WATCHDOG, wdog->timeout); +} + +static int retu_wdt_set_timeout(struct watchdog_device *wdog, + unsigned int timeout) +{ + struct retu_wdt_dev *wdev = watchdog_get_drvdata(wdog); + + wdog->timeout = timeout; + return retu_write(wdev->rdev, RETU_REG_WATCHDOG, wdog->timeout); +} + +static const struct watchdog_info retu_wdt_info = { + .options = WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE | WDIOF_KEEPALIVEPING, + .identity = "Retu watchdog", +}; + +static const struct watchdog_ops retu_wdt_ops = { + .owner = THIS_MODULE, + .start = retu_wdt_start, + .stop = retu_wdt_stop, + .ping = retu_wdt_ping, + .set_timeout = retu_wdt_set_timeout, +}; + +static int retu_wdt_probe(struct platform_device *pdev) +{ + struct retu_dev *rdev = dev_get_drvdata(pdev->dev.parent); + bool nowayout = WATCHDOG_NOWAYOUT; + struct watchdog_device *retu_wdt; + struct retu_wdt_dev *wdev; + int ret; + + retu_wdt = devm_kzalloc(&pdev->dev, sizeof(*retu_wdt), GFP_KERNEL); + if (!retu_wdt) + return -ENOMEM; + + wdev = devm_kzalloc(&pdev->dev, sizeof(*wdev), GFP_KERNEL); + if (!wdev) + return -ENOMEM; + + retu_wdt->info = &retu_wdt_info; + retu_wdt->ops = &retu_wdt_ops; + retu_wdt->timeout = RETU_WDT_MAX_TIMER; + retu_wdt->min_timeout = 0; + retu_wdt->max_timeout = RETU_WDT_MAX_TIMER; + retu_wdt->parent = &pdev->dev; + + watchdog_set_drvdata(retu_wdt, wdev); + watchdog_set_nowayout(retu_wdt, nowayout); + + wdev->rdev = rdev; + wdev->dev = &pdev->dev; + + INIT_DELAYED_WORK(&wdev->ping_work, retu_wdt_ping_work); + + ret = watchdog_register_device(retu_wdt); + if (ret < 0) + return ret; + + if (nowayout) + retu_wdt_ping(retu_wdt); + else + retu_wdt_ping_enable(wdev); + + platform_set_drvdata(pdev, retu_wdt); + + return 0; +} + +static int retu_wdt_remove(struct platform_device *pdev) +{ + struct watchdog_device *wdog = platform_get_drvdata(pdev); + struct retu_wdt_dev *wdev = watchdog_get_drvdata(wdog); + + watchdog_unregister_device(wdog); + cancel_delayed_work_sync(&wdev->ping_work); + + return 0; +} + +static struct platform_driver retu_wdt_driver = { + .probe = retu_wdt_probe, + .remove = retu_wdt_remove, + .driver = { + .name = "retu-wdt", + }, +}; +module_platform_driver(retu_wdt_driver); + +MODULE_ALIAS("platform:retu-wdt"); +MODULE_DESCRIPTION("Retu watchdog"); +MODULE_AUTHOR("Amit Kucheria"); +MODULE_AUTHOR("Aaro Koskinen <aaro.koskinen@iki.fi>"); +MODULE_LICENSE("GPL"); diff --git a/drivers/watchdog/riowd.c b/drivers/watchdog/riowd.c new file mode 100644 index 000000000..aba534246 --- /dev/null +++ b/drivers/watchdog/riowd.c @@ -0,0 +1,246 @@ +/* riowd.c - driver for hw watchdog inside Super I/O of RIO + * + * Copyright (C) 2001, 2008 David S. Miller (davem@davemloft.net) + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/types.h> +#include <linux/fs.h> +#include <linux/errno.h> +#include <linux/miscdevice.h> +#include <linux/watchdog.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/io.h> +#include <linux/uaccess.h> +#include <linux/slab.h> + + +/* RIO uses the NatSemi Super I/O power management logical device + * as its' watchdog. + * + * When the watchdog triggers, it asserts a line to the BBC (Boot Bus + * Controller) of the machine. The BBC can only be configured to + * trigger a power-on reset when the signal is asserted. The BBC + * can be configured to ignore the signal entirely as well. + * + * The only Super I/O device register we care about is at index + * 0x05 (WDTO_INDEX) which is the watchdog time-out in minutes (1-255). + * If set to zero, this disables the watchdog. When set, the system + * must periodically (before watchdog expires) clear (set to zero) and + * re-set the watchdog else it will trigger. + * + * There are two other indexed watchdog registers inside this Super I/O + * logical device, but they are unused. The first, at index 0x06 is + * the watchdog control and can be used to make the watchdog timer re-set + * when the PS/2 mouse or serial lines show activity. The second, at + * index 0x07 is merely a sampling of the line from the watchdog to the + * BBC. + * + * The watchdog device generates no interrupts. + */ + +MODULE_AUTHOR("David S. Miller <davem@davemloft.net>"); +MODULE_DESCRIPTION("Hardware watchdog driver for Sun RIO"); +MODULE_SUPPORTED_DEVICE("watchdog"); +MODULE_LICENSE("GPL"); + +#define DRIVER_NAME "riowd" +#define PFX DRIVER_NAME ": " + +struct riowd { + void __iomem *regs; + spinlock_t lock; +}; + +static struct riowd *riowd_device; + +#define WDTO_INDEX 0x05 + +static int riowd_timeout = 1; /* in minutes */ +module_param(riowd_timeout, int, 0); +MODULE_PARM_DESC(riowd_timeout, "Watchdog timeout in minutes"); + +static void riowd_writereg(struct riowd *p, u8 val, int index) +{ + unsigned long flags; + + spin_lock_irqsave(&p->lock, flags); + writeb(index, p->regs + 0); + writeb(val, p->regs + 1); + spin_unlock_irqrestore(&p->lock, flags); +} + +static int riowd_open(struct inode *inode, struct file *filp) +{ + nonseekable_open(inode, filp); + return 0; +} + +static int riowd_release(struct inode *inode, struct file *filp) +{ + return 0; +} + +static long riowd_ioctl(struct file *filp, unsigned int cmd, unsigned long arg) +{ + static const struct watchdog_info info = { + .options = WDIOF_SETTIMEOUT, + .firmware_version = 1, + .identity = DRIVER_NAME, + }; + void __user *argp = (void __user *)arg; + struct riowd *p = riowd_device; + unsigned int options; + int new_margin; + + switch (cmd) { + case WDIOC_GETSUPPORT: + if (copy_to_user(argp, &info, sizeof(info))) + return -EFAULT; + break; + + case WDIOC_GETSTATUS: + case WDIOC_GETBOOTSTATUS: + if (put_user(0, (int __user *)argp)) + return -EFAULT; + break; + + case WDIOC_KEEPALIVE: + riowd_writereg(p, riowd_timeout, WDTO_INDEX); + break; + + case WDIOC_SETOPTIONS: + if (copy_from_user(&options, argp, sizeof(options))) + return -EFAULT; + + if (options & WDIOS_DISABLECARD) + riowd_writereg(p, 0, WDTO_INDEX); + else if (options & WDIOS_ENABLECARD) + riowd_writereg(p, riowd_timeout, WDTO_INDEX); + else + return -EINVAL; + + break; + + case WDIOC_SETTIMEOUT: + if (get_user(new_margin, (int __user *)argp)) + return -EFAULT; + if ((new_margin < 60) || (new_margin > (255 * 60))) + return -EINVAL; + riowd_timeout = (new_margin + 59) / 60; + riowd_writereg(p, riowd_timeout, WDTO_INDEX); + /* Fall */ + + case WDIOC_GETTIMEOUT: + return put_user(riowd_timeout * 60, (int __user *)argp); + + default: + return -EINVAL; + }; + + return 0; +} + +static ssize_t riowd_write(struct file *file, const char __user *buf, + size_t count, loff_t *ppos) +{ + struct riowd *p = riowd_device; + + if (count) { + riowd_writereg(p, riowd_timeout, WDTO_INDEX); + return 1; + } + + return 0; +} + +static const struct file_operations riowd_fops = { + .owner = THIS_MODULE, + .llseek = no_llseek, + .unlocked_ioctl = riowd_ioctl, + .open = riowd_open, + .write = riowd_write, + .release = riowd_release, +}; + +static struct miscdevice riowd_miscdev = { + .minor = WATCHDOG_MINOR, + .name = "watchdog", + .fops = &riowd_fops +}; + +static int riowd_probe(struct platform_device *op) +{ + struct riowd *p; + int err = -EINVAL; + + if (riowd_device) + goto out; + + err = -ENOMEM; + p = devm_kzalloc(&op->dev, sizeof(*p), GFP_KERNEL); + if (!p) + goto out; + + spin_lock_init(&p->lock); + + p->regs = of_ioremap(&op->resource[0], 0, 2, DRIVER_NAME); + if (!p->regs) { + pr_err("Cannot map registers\n"); + goto out; + } + /* Make miscdev useable right away */ + riowd_device = p; + + err = misc_register(&riowd_miscdev); + if (err) { + pr_err("Cannot register watchdog misc device\n"); + goto out_iounmap; + } + + pr_info("Hardware watchdog [%i minutes], regs at %p\n", + riowd_timeout, p->regs); + + platform_set_drvdata(op, p); + return 0; + +out_iounmap: + riowd_device = NULL; + of_iounmap(&op->resource[0], p->regs, 2); + +out: + return err; +} + +static int riowd_remove(struct platform_device *op) +{ + struct riowd *p = platform_get_drvdata(op); + + misc_deregister(&riowd_miscdev); + of_iounmap(&op->resource[0], p->regs, 2); + + return 0; +} + +static const struct of_device_id riowd_match[] = { + { + .name = "pmc", + }, + {}, +}; +MODULE_DEVICE_TABLE(of, riowd_match); + +static struct platform_driver riowd_driver = { + .driver = { + .name = DRIVER_NAME, + .of_match_table = riowd_match, + }, + .probe = riowd_probe, + .remove = riowd_remove, +}; + +module_platform_driver(riowd_driver); diff --git a/drivers/watchdog/rn5t618_wdt.c b/drivers/watchdog/rn5t618_wdt.c new file mode 100644 index 000000000..d2e79cf70 --- /dev/null +++ b/drivers/watchdog/rn5t618_wdt.c @@ -0,0 +1,199 @@ +/* + * Watchdog driver for Ricoh RN5T618 PMIC + * + * Copyright (C) 2014 Beniamino Galvani <b.galvani@gmail.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include <linux/device.h> +#include <linux/mfd/rn5t618.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/watchdog.h> + +#define DRIVER_NAME "rn5t618-wdt" + +static bool nowayout = WATCHDOG_NOWAYOUT; +static unsigned int timeout; + +module_param(timeout, uint, 0); +MODULE_PARM_DESC(timeout, "Initial watchdog timeout in seconds"); + +module_param(nowayout, bool, 0); +MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); + +struct rn5t618_wdt { + struct watchdog_device wdt_dev; + struct rn5t618 *rn5t618; +}; + +/* + * This array encodes the values of WDOGTIM field for the supported + * watchdog expiration times. If the watchdog is not accessed before + * the timer expiration, the PMU generates an interrupt and if the CPU + * doesn't clear it within one second the system is restarted. + */ +static const struct { + u8 reg_val; + unsigned int time; +} rn5t618_wdt_map[] = { + { 0, 1 }, + { 1, 8 }, + { 2, 32 }, + { 3, 128 }, +}; + +static int rn5t618_wdt_set_timeout(struct watchdog_device *wdt_dev, + unsigned int t) +{ + struct rn5t618_wdt *wdt = watchdog_get_drvdata(wdt_dev); + int ret, i; + + for (i = 0; i < ARRAY_SIZE(rn5t618_wdt_map); i++) { + if (rn5t618_wdt_map[i].time + 1 >= t) + break; + } + + if (i == ARRAY_SIZE(rn5t618_wdt_map)) + return -EINVAL; + + ret = regmap_update_bits(wdt->rn5t618->regmap, RN5T618_WATCHDOG, + RN5T618_WATCHDOG_WDOGTIM_M, + rn5t618_wdt_map[i].reg_val); + if (!ret) + wdt_dev->timeout = rn5t618_wdt_map[i].time; + + return ret; +} + +static int rn5t618_wdt_start(struct watchdog_device *wdt_dev) +{ + struct rn5t618_wdt *wdt = watchdog_get_drvdata(wdt_dev); + int ret; + + ret = rn5t618_wdt_set_timeout(wdt_dev, wdt_dev->timeout); + if (ret) + return ret; + + /* enable repower-on */ + ret = regmap_update_bits(wdt->rn5t618->regmap, RN5T618_REPCNT, + RN5T618_REPCNT_REPWRON, + RN5T618_REPCNT_REPWRON); + if (ret) + return ret; + + /* enable watchdog */ + ret = regmap_update_bits(wdt->rn5t618->regmap, RN5T618_WATCHDOG, + RN5T618_WATCHDOG_WDOGEN, + RN5T618_WATCHDOG_WDOGEN); + if (ret) + return ret; + + /* enable watchdog interrupt */ + return regmap_update_bits(wdt->rn5t618->regmap, RN5T618_PWRIREN, + RN5T618_PWRIRQ_IR_WDOG, + RN5T618_PWRIRQ_IR_WDOG); +} + +static int rn5t618_wdt_stop(struct watchdog_device *wdt_dev) +{ + struct rn5t618_wdt *wdt = watchdog_get_drvdata(wdt_dev); + + return regmap_update_bits(wdt->rn5t618->regmap, RN5T618_WATCHDOG, + RN5T618_WATCHDOG_WDOGEN, 0); +} + +static int rn5t618_wdt_ping(struct watchdog_device *wdt_dev) +{ + struct rn5t618_wdt *wdt = watchdog_get_drvdata(wdt_dev); + unsigned int val; + int ret; + + /* The counter is restarted after a R/W access to watchdog register */ + ret = regmap_read(wdt->rn5t618->regmap, RN5T618_WATCHDOG, &val); + if (ret) + return ret; + + ret = regmap_write(wdt->rn5t618->regmap, RN5T618_WATCHDOG, val); + if (ret) + return ret; + + /* Clear pending watchdog interrupt */ + return regmap_update_bits(wdt->rn5t618->regmap, RN5T618_PWRIRQ, + RN5T618_PWRIRQ_IR_WDOG, 0); +} + +static const struct watchdog_info rn5t618_wdt_info = { + .options = WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE | + WDIOF_KEEPALIVEPING, + .identity = DRIVER_NAME, +}; + +static const struct watchdog_ops rn5t618_wdt_ops = { + .owner = THIS_MODULE, + .start = rn5t618_wdt_start, + .stop = rn5t618_wdt_stop, + .ping = rn5t618_wdt_ping, + .set_timeout = rn5t618_wdt_set_timeout, +}; + +static int rn5t618_wdt_probe(struct platform_device *pdev) +{ + struct rn5t618 *rn5t618 = dev_get_drvdata(pdev->dev.parent); + struct rn5t618_wdt *wdt; + int min_timeout, max_timeout; + + wdt = devm_kzalloc(&pdev->dev, sizeof(struct rn5t618_wdt), GFP_KERNEL); + if (!wdt) + return -ENOMEM; + + min_timeout = rn5t618_wdt_map[0].time; + max_timeout = rn5t618_wdt_map[ARRAY_SIZE(rn5t618_wdt_map) - 1].time; + + wdt->rn5t618 = rn5t618; + wdt->wdt_dev.info = &rn5t618_wdt_info; + wdt->wdt_dev.ops = &rn5t618_wdt_ops; + wdt->wdt_dev.min_timeout = min_timeout; + wdt->wdt_dev.max_timeout = max_timeout; + wdt->wdt_dev.timeout = max_timeout; + wdt->wdt_dev.parent = &pdev->dev; + + watchdog_set_drvdata(&wdt->wdt_dev, wdt); + watchdog_init_timeout(&wdt->wdt_dev, timeout, &pdev->dev); + watchdog_set_nowayout(&wdt->wdt_dev, nowayout); + + platform_set_drvdata(pdev, wdt); + + return watchdog_register_device(&wdt->wdt_dev); +} + +static int rn5t618_wdt_remove(struct platform_device *pdev) +{ + struct rn5t618_wdt *wdt = platform_get_drvdata(pdev); + + watchdog_unregister_device(&wdt->wdt_dev); + + return 0; +} + +static struct platform_driver rn5t618_wdt_driver = { + .probe = rn5t618_wdt_probe, + .remove = rn5t618_wdt_remove, + .driver = { + .name = DRIVER_NAME, + }, +}; + +module_platform_driver(rn5t618_wdt_driver); + +MODULE_ALIAS("platform:rn5t618-wdt"); +MODULE_AUTHOR("Beniamino Galvani <b.galvani@gmail.com>"); +MODULE_DESCRIPTION("RN5T618 watchdog driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/watchdog/rt2880_wdt.c b/drivers/watchdog/rt2880_wdt.c new file mode 100644 index 000000000..db7c57d82 --- /dev/null +++ b/drivers/watchdog/rt2880_wdt.c @@ -0,0 +1,209 @@ +/* + * Ralink RT288x/RT3xxx/MT76xx built-in hardware watchdog timer + * + * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org> + * Copyright (C) 2013 John Crispin <john@phrozen.org> + * + * This driver was based on: drivers/watchdog/softdog.c + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/clk.h> +#include <linux/reset.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/watchdog.h> +#include <linux/moduleparam.h> +#include <linux/platform_device.h> +#include <linux/mod_devicetable.h> + +#include <asm/mach-ralink/ralink_regs.h> + +#define SYSC_RSTSTAT 0x38 +#define WDT_RST_CAUSE BIT(1) + +#define RALINK_WDT_TIMEOUT 30 +#define RALINK_WDT_PRESCALE 65536 + +#define TIMER_REG_TMR1LOAD 0x00 +#define TIMER_REG_TMR1CTL 0x08 + +#define TMRSTAT_TMR1RST BIT(5) + +#define TMR1CTL_ENABLE BIT(7) +#define TMR1CTL_MODE_SHIFT 4 +#define TMR1CTL_MODE_MASK 0x3 +#define TMR1CTL_MODE_FREE_RUNNING 0x0 +#define TMR1CTL_MODE_PERIODIC 0x1 +#define TMR1CTL_MODE_TIMEOUT 0x2 +#define TMR1CTL_MODE_WDT 0x3 +#define TMR1CTL_PRESCALE_MASK 0xf +#define TMR1CTL_PRESCALE_65536 0xf + +static struct clk *rt288x_wdt_clk; +static unsigned long rt288x_wdt_freq; +static void __iomem *rt288x_wdt_base; +static struct reset_control *rt288x_wdt_reset; + +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); +MODULE_PARM_DESC(nowayout, + "Watchdog cannot be stopped once started (default=" + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); + +static inline void rt_wdt_w32(unsigned reg, u32 val) +{ + iowrite32(val, rt288x_wdt_base + reg); +} + +static inline u32 rt_wdt_r32(unsigned reg) +{ + return ioread32(rt288x_wdt_base + reg); +} + +static int rt288x_wdt_ping(struct watchdog_device *w) +{ + rt_wdt_w32(TIMER_REG_TMR1LOAD, w->timeout * rt288x_wdt_freq); + + return 0; +} + +static int rt288x_wdt_start(struct watchdog_device *w) +{ + u32 t; + + t = rt_wdt_r32(TIMER_REG_TMR1CTL); + t &= ~(TMR1CTL_MODE_MASK << TMR1CTL_MODE_SHIFT | + TMR1CTL_PRESCALE_MASK); + t |= (TMR1CTL_MODE_WDT << TMR1CTL_MODE_SHIFT | + TMR1CTL_PRESCALE_65536); + rt_wdt_w32(TIMER_REG_TMR1CTL, t); + + rt288x_wdt_ping(w); + + t = rt_wdt_r32(TIMER_REG_TMR1CTL); + t |= TMR1CTL_ENABLE; + rt_wdt_w32(TIMER_REG_TMR1CTL, t); + + return 0; +} + +static int rt288x_wdt_stop(struct watchdog_device *w) +{ + u32 t; + + rt288x_wdt_ping(w); + + t = rt_wdt_r32(TIMER_REG_TMR1CTL); + t &= ~TMR1CTL_ENABLE; + rt_wdt_w32(TIMER_REG_TMR1CTL, t); + + return 0; +} + +static int rt288x_wdt_set_timeout(struct watchdog_device *w, unsigned int t) +{ + w->timeout = t; + rt288x_wdt_ping(w); + + return 0; +} + +static int rt288x_wdt_bootcause(void) +{ + if (rt_sysc_r32(SYSC_RSTSTAT) & WDT_RST_CAUSE) + return WDIOF_CARDRESET; + + return 0; +} + +static const struct watchdog_info rt288x_wdt_info = { + .identity = "Ralink Watchdog", + .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE, +}; + +static const struct watchdog_ops rt288x_wdt_ops = { + .owner = THIS_MODULE, + .start = rt288x_wdt_start, + .stop = rt288x_wdt_stop, + .ping = rt288x_wdt_ping, + .set_timeout = rt288x_wdt_set_timeout, +}; + +static struct watchdog_device rt288x_wdt_dev = { + .info = &rt288x_wdt_info, + .ops = &rt288x_wdt_ops, + .min_timeout = 1, +}; + +static int rt288x_wdt_probe(struct platform_device *pdev) +{ + struct resource *res; + int ret; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + rt288x_wdt_base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(rt288x_wdt_base)) + return PTR_ERR(rt288x_wdt_base); + + rt288x_wdt_clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(rt288x_wdt_clk)) + return PTR_ERR(rt288x_wdt_clk); + + rt288x_wdt_reset = devm_reset_control_get_exclusive(&pdev->dev, NULL); + if (!IS_ERR(rt288x_wdt_reset)) + reset_control_deassert(rt288x_wdt_reset); + + rt288x_wdt_freq = clk_get_rate(rt288x_wdt_clk) / RALINK_WDT_PRESCALE; + + rt288x_wdt_dev.bootstatus = rt288x_wdt_bootcause(); + rt288x_wdt_dev.max_timeout = (0xfffful / rt288x_wdt_freq); + rt288x_wdt_dev.parent = &pdev->dev; + + watchdog_init_timeout(&rt288x_wdt_dev, rt288x_wdt_dev.max_timeout, + &pdev->dev); + watchdog_set_nowayout(&rt288x_wdt_dev, nowayout); + + ret = watchdog_register_device(&rt288x_wdt_dev); + if (!ret) + dev_info(&pdev->dev, "Initialized\n"); + + return 0; +} + +static int rt288x_wdt_remove(struct platform_device *pdev) +{ + watchdog_unregister_device(&rt288x_wdt_dev); + + return 0; +} + +static void rt288x_wdt_shutdown(struct platform_device *pdev) +{ + rt288x_wdt_stop(&rt288x_wdt_dev); +} + +static const struct of_device_id rt288x_wdt_match[] = { + { .compatible = "ralink,rt2880-wdt" }, + {}, +}; +MODULE_DEVICE_TABLE(of, rt288x_wdt_match); + +static struct platform_driver rt288x_wdt_driver = { + .probe = rt288x_wdt_probe, + .remove = rt288x_wdt_remove, + .shutdown = rt288x_wdt_shutdown, + .driver = { + .name = KBUILD_MODNAME, + .of_match_table = rt288x_wdt_match, + }, +}; + +module_platform_driver(rt288x_wdt_driver); + +MODULE_DESCRIPTION("MediaTek/Ralink RT288x/RT3xxx hardware watchdog driver"); +MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/watchdog/rtd119x_wdt.c b/drivers/watchdog/rtd119x_wdt.c new file mode 100644 index 000000000..99caec688 --- /dev/null +++ b/drivers/watchdog/rtd119x_wdt.c @@ -0,0 +1,168 @@ +/* + * Realtek RTD129x watchdog + * + * Copyright (c) 2017 Andreas Färber + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <linux/bitops.h> +#include <linux/clk.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/platform_device.h> +#include <linux/watchdog.h> + +#define RTD119X_TCWCR 0x0 +#define RTD119X_TCWTR 0x4 +#define RTD119X_TCWOV 0xc + +#define RTD119X_TCWCR_WDEN_DISABLED 0xa5 +#define RTD119X_TCWCR_WDEN_ENABLED 0xff +#define RTD119X_TCWCR_WDEN_MASK 0xff + +#define RTD119X_TCWTR_WDCLR BIT(0) + +struct rtd119x_watchdog_device { + struct watchdog_device wdt_dev; + void __iomem *base; + struct clk *clk; +}; + +static int rtd119x_wdt_start(struct watchdog_device *wdev) +{ + struct rtd119x_watchdog_device *data = watchdog_get_drvdata(wdev); + u32 val; + + val = readl_relaxed(data->base + RTD119X_TCWCR); + val &= ~RTD119X_TCWCR_WDEN_MASK; + val |= RTD119X_TCWCR_WDEN_ENABLED; + writel(val, data->base + RTD119X_TCWCR); + + return 0; +} + +static int rtd119x_wdt_stop(struct watchdog_device *wdev) +{ + struct rtd119x_watchdog_device *data = watchdog_get_drvdata(wdev); + u32 val; + + val = readl_relaxed(data->base + RTD119X_TCWCR); + val &= ~RTD119X_TCWCR_WDEN_MASK; + val |= RTD119X_TCWCR_WDEN_DISABLED; + writel(val, data->base + RTD119X_TCWCR); + + return 0; +} + +static int rtd119x_wdt_ping(struct watchdog_device *wdev) +{ + struct rtd119x_watchdog_device *data = watchdog_get_drvdata(wdev); + + writel_relaxed(RTD119X_TCWTR_WDCLR, data->base + RTD119X_TCWTR); + + return rtd119x_wdt_start(wdev); +} + +static int rtd119x_wdt_set_timeout(struct watchdog_device *wdev, unsigned int val) +{ + struct rtd119x_watchdog_device *data = watchdog_get_drvdata(wdev); + + writel(val * clk_get_rate(data->clk), data->base + RTD119X_TCWOV); + + data->wdt_dev.timeout = val; + + return 0; +} + +static const struct watchdog_ops rtd119x_wdt_ops = { + .owner = THIS_MODULE, + .start = rtd119x_wdt_start, + .stop = rtd119x_wdt_stop, + .ping = rtd119x_wdt_ping, + .set_timeout = rtd119x_wdt_set_timeout, +}; + +static const struct watchdog_info rtd119x_wdt_info = { + .identity = "rtd119x-wdt", + .options = 0, +}; + +static const struct of_device_id rtd119x_wdt_dt_ids[] = { + { .compatible = "realtek,rtd1295-watchdog" }, + { } +}; + +static int rtd119x_wdt_probe(struct platform_device *pdev) +{ + struct rtd119x_watchdog_device *data; + struct resource *res; + int ret; + + data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + data->base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(data->base)) + return PTR_ERR(data->base); + + data->clk = of_clk_get(pdev->dev.of_node, 0); + if (IS_ERR(data->clk)) + return PTR_ERR(data->clk); + + ret = clk_prepare_enable(data->clk); + if (ret) { + clk_put(data->clk); + return ret; + } + + data->wdt_dev.info = &rtd119x_wdt_info; + data->wdt_dev.ops = &rtd119x_wdt_ops; + data->wdt_dev.timeout = 120; + data->wdt_dev.max_timeout = 0xffffffff / clk_get_rate(data->clk); + data->wdt_dev.min_timeout = 1; + data->wdt_dev.parent = &pdev->dev; + + watchdog_stop_on_reboot(&data->wdt_dev); + watchdog_set_drvdata(&data->wdt_dev, data); + platform_set_drvdata(pdev, data); + + writel_relaxed(RTD119X_TCWTR_WDCLR, data->base + RTD119X_TCWTR); + rtd119x_wdt_set_timeout(&data->wdt_dev, data->wdt_dev.timeout); + rtd119x_wdt_stop(&data->wdt_dev); + + ret = watchdog_register_device(&data->wdt_dev); + if (ret) { + clk_disable_unprepare(data->clk); + clk_put(data->clk); + return ret; + } + + return 0; +} + +static int rtd119x_wdt_remove(struct platform_device *pdev) +{ + struct rtd119x_watchdog_device *data = platform_get_drvdata(pdev); + + watchdog_unregister_device(&data->wdt_dev); + + clk_disable_unprepare(data->clk); + clk_put(data->clk); + + return 0; +} + +static struct platform_driver rtd119x_wdt_driver = { + .probe = rtd119x_wdt_probe, + .remove = rtd119x_wdt_remove, + .driver = { + .name = "rtd1295-watchdog", + .of_match_table = rtd119x_wdt_dt_ids, + }, +}; +builtin_platform_driver(rtd119x_wdt_driver); diff --git a/drivers/watchdog/rza_wdt.c b/drivers/watchdog/rza_wdt.c new file mode 100644 index 000000000..e618218d2 --- /dev/null +++ b/drivers/watchdog/rza_wdt.c @@ -0,0 +1,199 @@ +/* + * Renesas RZ/A Series WDT Driver + * + * Copyright (C) 2017 Renesas Electronics America, Inc. + * Copyright (C) 2017 Chris Brandt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#include <linux/bitops.h> +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/module.h> +#include <linux/of_address.h> +#include <linux/platform_device.h> +#include <linux/watchdog.h> + +#define DEFAULT_TIMEOUT 30 + +/* Watchdog Timer Registers */ +#define WTCSR 0 +#define WTCSR_MAGIC 0xA500 +#define WTSCR_WT BIT(6) +#define WTSCR_TME BIT(5) +#define WTSCR_CKS(i) (i) + +#define WTCNT 2 +#define WTCNT_MAGIC 0x5A00 + +#define WRCSR 4 +#define WRCSR_MAGIC 0x5A00 +#define WRCSR_RSTE BIT(6) +#define WRCSR_CLEAR_WOVF 0xA500 /* special value */ + +struct rza_wdt { + struct watchdog_device wdev; + void __iomem *base; + struct clk *clk; +}; + +static int rza_wdt_start(struct watchdog_device *wdev) +{ + struct rza_wdt *priv = watchdog_get_drvdata(wdev); + + /* Stop timer */ + writew(WTCSR_MAGIC | 0, priv->base + WTCSR); + + /* Must dummy read WRCSR:WOVF at least once before clearing */ + readb(priv->base + WRCSR); + writew(WRCSR_CLEAR_WOVF, priv->base + WRCSR); + + /* + * Start timer with slowest clock source and reset option enabled. + */ + writew(WRCSR_MAGIC | WRCSR_RSTE, priv->base + WRCSR); + writew(WTCNT_MAGIC | 0, priv->base + WTCNT); + writew(WTCSR_MAGIC | WTSCR_WT | WTSCR_TME | WTSCR_CKS(7), + priv->base + WTCSR); + + return 0; +} + +static int rza_wdt_stop(struct watchdog_device *wdev) +{ + struct rza_wdt *priv = watchdog_get_drvdata(wdev); + + writew(WTCSR_MAGIC | 0, priv->base + WTCSR); + + return 0; +} + +static int rza_wdt_ping(struct watchdog_device *wdev) +{ + struct rza_wdt *priv = watchdog_get_drvdata(wdev); + + writew(WTCNT_MAGIC | 0, priv->base + WTCNT); + + return 0; +} + +static int rza_wdt_restart(struct watchdog_device *wdev, unsigned long action, + void *data) +{ + struct rza_wdt *priv = watchdog_get_drvdata(wdev); + + /* Stop timer */ + writew(WTCSR_MAGIC | 0, priv->base + WTCSR); + + /* Must dummy read WRCSR:WOVF at least once before clearing */ + readb(priv->base + WRCSR); + writew(WRCSR_CLEAR_WOVF, priv->base + WRCSR); + + /* + * Start timer with fastest clock source and only 1 clock left before + * overflow with reset option enabled. + */ + writew(WRCSR_MAGIC | WRCSR_RSTE, priv->base + WRCSR); + writew(WTCNT_MAGIC | 255, priv->base + WTCNT); + writew(WTCSR_MAGIC | WTSCR_WT | WTSCR_TME, priv->base + WTCSR); + + /* + * Actually make sure the above sequence hits hardware before sleeping. + */ + wmb(); + + /* Wait for WDT overflow (reset) */ + udelay(20); + + return 0; +} + +static const struct watchdog_info rza_wdt_ident = { + .options = WDIOF_MAGICCLOSE | WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT, + .identity = "Renesas RZ/A WDT Watchdog", +}; + +static const struct watchdog_ops rza_wdt_ops = { + .owner = THIS_MODULE, + .start = rza_wdt_start, + .stop = rza_wdt_stop, + .ping = rza_wdt_ping, + .restart = rza_wdt_restart, +}; + +static int rza_wdt_probe(struct platform_device *pdev) +{ + struct rza_wdt *priv; + struct resource *res; + unsigned long rate; + int ret; + + priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + priv->base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(priv->base)) + return PTR_ERR(priv->base); + + priv->clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(priv->clk)) + return PTR_ERR(priv->clk); + + rate = clk_get_rate(priv->clk); + if (rate < 16384) { + dev_err(&pdev->dev, "invalid clock rate (%ld)\n", rate); + return -ENOENT; + } + + /* Assume slowest clock rate possible (CKS=7) */ + rate /= 16384; + + priv->wdev.info = &rza_wdt_ident, + priv->wdev.ops = &rza_wdt_ops, + priv->wdev.parent = &pdev->dev; + + /* + * Since the max possible timeout of our 8-bit count register is less + * than a second, we must use max_hw_heartbeat_ms. + */ + priv->wdev.max_hw_heartbeat_ms = (1000 * U8_MAX) / rate; + dev_dbg(&pdev->dev, "max hw timeout of %dms\n", + priv->wdev.max_hw_heartbeat_ms); + + priv->wdev.min_timeout = 1; + priv->wdev.timeout = DEFAULT_TIMEOUT; + + watchdog_init_timeout(&priv->wdev, 0, &pdev->dev); + watchdog_set_drvdata(&priv->wdev, priv); + + ret = devm_watchdog_register_device(&pdev->dev, &priv->wdev); + if (ret) + dev_err(&pdev->dev, "Cannot register watchdog device\n"); + + return ret; +} + +static const struct of_device_id rza_wdt_of_match[] = { + { .compatible = "renesas,rza-wdt", }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, rza_wdt_of_match); + +static struct platform_driver rza_wdt_driver = { + .probe = rza_wdt_probe, + .driver = { + .name = "rza_wdt", + .of_match_table = rza_wdt_of_match, + }, +}; + +module_platform_driver(rza_wdt_driver); + +MODULE_DESCRIPTION("Renesas RZ/A WDT Driver"); +MODULE_AUTHOR("Chris Brandt <chris.brandt@renesas.com>"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/watchdog/s3c2410_wdt.c b/drivers/watchdog/s3c2410_wdt.c new file mode 100644 index 000000000..adaa43543 --- /dev/null +++ b/drivers/watchdog/s3c2410_wdt.c @@ -0,0 +1,754 @@ +/* + * Copyright (c) 2004 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * S3C2410 Watchdog Timer Support + * + * Based on, softdog.c by Alan Cox, + * (c) Copyright 1996 Alan Cox <alan@lxorguk.ukuu.org.uk> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/types.h> +#include <linux/timer.h> +#include <linux/watchdog.h> +#include <linux/platform_device.h> +#include <linux/interrupt.h> +#include <linux/clk.h> +#include <linux/uaccess.h> +#include <linux/io.h> +#include <linux/cpufreq.h> +#include <linux/slab.h> +#include <linux/err.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/mfd/syscon.h> +#include <linux/regmap.h> +#include <linux/delay.h> + +#define S3C2410_WTCON 0x00 +#define S3C2410_WTDAT 0x04 +#define S3C2410_WTCNT 0x08 +#define S3C2410_WTCLRINT 0x0c + +#define S3C2410_WTCNT_MAXCNT 0xffff + +#define S3C2410_WTCON_RSTEN (1 << 0) +#define S3C2410_WTCON_INTEN (1 << 2) +#define S3C2410_WTCON_ENABLE (1 << 5) + +#define S3C2410_WTCON_DIV16 (0 << 3) +#define S3C2410_WTCON_DIV32 (1 << 3) +#define S3C2410_WTCON_DIV64 (2 << 3) +#define S3C2410_WTCON_DIV128 (3 << 3) + +#define S3C2410_WTCON_MAXDIV 0x80 + +#define S3C2410_WTCON_PRESCALE(x) ((x) << 8) +#define S3C2410_WTCON_PRESCALE_MASK (0xff << 8) +#define S3C2410_WTCON_PRESCALE_MAX 0xff + +#define S3C2410_WATCHDOG_ATBOOT (0) +#define S3C2410_WATCHDOG_DEFAULT_TIME (15) + +#define EXYNOS5_RST_STAT_REG_OFFSET 0x0404 +#define EXYNOS5_WDT_DISABLE_REG_OFFSET 0x0408 +#define EXYNOS5_WDT_MASK_RESET_REG_OFFSET 0x040c +#define QUIRK_HAS_PMU_CONFIG (1 << 0) +#define QUIRK_HAS_RST_STAT (1 << 1) +#define QUIRK_HAS_WTCLRINT_REG (1 << 2) + +/* These quirks require that we have a PMU register map */ +#define QUIRKS_HAVE_PMUREG (QUIRK_HAS_PMU_CONFIG | \ + QUIRK_HAS_RST_STAT) + +static bool nowayout = WATCHDOG_NOWAYOUT; +static int tmr_margin; +static int tmr_atboot = S3C2410_WATCHDOG_ATBOOT; +static int soft_noboot; + +module_param(tmr_margin, int, 0); +module_param(tmr_atboot, int, 0); +module_param(nowayout, bool, 0); +module_param(soft_noboot, int, 0); + +MODULE_PARM_DESC(tmr_margin, "Watchdog tmr_margin in seconds. (default=" + __MODULE_STRING(S3C2410_WATCHDOG_DEFAULT_TIME) ")"); +MODULE_PARM_DESC(tmr_atboot, + "Watchdog is started at boot time if set to 1, default=" + __MODULE_STRING(S3C2410_WATCHDOG_ATBOOT)); +MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); +MODULE_PARM_DESC(soft_noboot, "Watchdog action, set to 1 to ignore reboots, 0 to reboot (default 0)"); + +/** + * struct s3c2410_wdt_variant - Per-variant config data + * + * @disable_reg: Offset in pmureg for the register that disables the watchdog + * timer reset functionality. + * @mask_reset_reg: Offset in pmureg for the register that masks the watchdog + * timer reset functionality. + * @mask_bit: Bit number for the watchdog timer in the disable register and the + * mask reset register. + * @rst_stat_reg: Offset in pmureg for the register that has the reset status. + * @rst_stat_bit: Bit number in the rst_stat register indicating a watchdog + * reset. + * @quirks: A bitfield of quirks. + */ + +struct s3c2410_wdt_variant { + int disable_reg; + int mask_reset_reg; + int mask_bit; + int rst_stat_reg; + int rst_stat_bit; + u32 quirks; +}; + +struct s3c2410_wdt { + struct device *dev; + struct clk *clock; + void __iomem *reg_base; + unsigned int count; + spinlock_t lock; + unsigned long wtcon_save; + unsigned long wtdat_save; + struct watchdog_device wdt_device; + struct notifier_block freq_transition; + const struct s3c2410_wdt_variant *drv_data; + struct regmap *pmureg; +}; + +static const struct s3c2410_wdt_variant drv_data_s3c2410 = { + .quirks = 0 +}; + +#ifdef CONFIG_OF +static const struct s3c2410_wdt_variant drv_data_s3c6410 = { + .quirks = QUIRK_HAS_WTCLRINT_REG, +}; + +static const struct s3c2410_wdt_variant drv_data_exynos5250 = { + .disable_reg = EXYNOS5_WDT_DISABLE_REG_OFFSET, + .mask_reset_reg = EXYNOS5_WDT_MASK_RESET_REG_OFFSET, + .mask_bit = 20, + .rst_stat_reg = EXYNOS5_RST_STAT_REG_OFFSET, + .rst_stat_bit = 20, + .quirks = QUIRK_HAS_PMU_CONFIG | QUIRK_HAS_RST_STAT \ + | QUIRK_HAS_WTCLRINT_REG, +}; + +static const struct s3c2410_wdt_variant drv_data_exynos5420 = { + .disable_reg = EXYNOS5_WDT_DISABLE_REG_OFFSET, + .mask_reset_reg = EXYNOS5_WDT_MASK_RESET_REG_OFFSET, + .mask_bit = 0, + .rst_stat_reg = EXYNOS5_RST_STAT_REG_OFFSET, + .rst_stat_bit = 9, + .quirks = QUIRK_HAS_PMU_CONFIG | QUIRK_HAS_RST_STAT \ + | QUIRK_HAS_WTCLRINT_REG, +}; + +static const struct s3c2410_wdt_variant drv_data_exynos7 = { + .disable_reg = EXYNOS5_WDT_DISABLE_REG_OFFSET, + .mask_reset_reg = EXYNOS5_WDT_MASK_RESET_REG_OFFSET, + .mask_bit = 23, + .rst_stat_reg = EXYNOS5_RST_STAT_REG_OFFSET, + .rst_stat_bit = 23, /* A57 WDTRESET */ + .quirks = QUIRK_HAS_PMU_CONFIG | QUIRK_HAS_RST_STAT \ + | QUIRK_HAS_WTCLRINT_REG, +}; + +static const struct of_device_id s3c2410_wdt_match[] = { + { .compatible = "samsung,s3c2410-wdt", + .data = &drv_data_s3c2410 }, + { .compatible = "samsung,s3c6410-wdt", + .data = &drv_data_s3c6410 }, + { .compatible = "samsung,exynos5250-wdt", + .data = &drv_data_exynos5250 }, + { .compatible = "samsung,exynos5420-wdt", + .data = &drv_data_exynos5420 }, + { .compatible = "samsung,exynos7-wdt", + .data = &drv_data_exynos7 }, + {}, +}; +MODULE_DEVICE_TABLE(of, s3c2410_wdt_match); +#endif + +static const struct platform_device_id s3c2410_wdt_ids[] = { + { + .name = "s3c2410-wdt", + .driver_data = (unsigned long)&drv_data_s3c2410, + }, + {} +}; +MODULE_DEVICE_TABLE(platform, s3c2410_wdt_ids); + +/* functions */ + +static inline unsigned int s3c2410wdt_max_timeout(struct clk *clock) +{ + unsigned long freq = clk_get_rate(clock); + + return S3C2410_WTCNT_MAXCNT / (freq / (S3C2410_WTCON_PRESCALE_MAX + 1) + / S3C2410_WTCON_MAXDIV); +} + +static inline struct s3c2410_wdt *freq_to_wdt(struct notifier_block *nb) +{ + return container_of(nb, struct s3c2410_wdt, freq_transition); +} + +static int s3c2410wdt_mask_and_disable_reset(struct s3c2410_wdt *wdt, bool mask) +{ + int ret; + u32 mask_val = 1 << wdt->drv_data->mask_bit; + u32 val = 0; + + /* No need to do anything if no PMU CONFIG needed */ + if (!(wdt->drv_data->quirks & QUIRK_HAS_PMU_CONFIG)) + return 0; + + if (mask) + val = mask_val; + + ret = regmap_update_bits(wdt->pmureg, + wdt->drv_data->disable_reg, + mask_val, val); + if (ret < 0) + goto error; + + ret = regmap_update_bits(wdt->pmureg, + wdt->drv_data->mask_reset_reg, + mask_val, val); + error: + if (ret < 0) + dev_err(wdt->dev, "failed to update reg(%d)\n", ret); + + return ret; +} + +static int s3c2410wdt_keepalive(struct watchdog_device *wdd) +{ + struct s3c2410_wdt *wdt = watchdog_get_drvdata(wdd); + + spin_lock(&wdt->lock); + writel(wdt->count, wdt->reg_base + S3C2410_WTCNT); + spin_unlock(&wdt->lock); + + return 0; +} + +static void __s3c2410wdt_stop(struct s3c2410_wdt *wdt) +{ + unsigned long wtcon; + + wtcon = readl(wdt->reg_base + S3C2410_WTCON); + wtcon &= ~(S3C2410_WTCON_ENABLE | S3C2410_WTCON_RSTEN); + writel(wtcon, wdt->reg_base + S3C2410_WTCON); +} + +static int s3c2410wdt_stop(struct watchdog_device *wdd) +{ + struct s3c2410_wdt *wdt = watchdog_get_drvdata(wdd); + + spin_lock(&wdt->lock); + __s3c2410wdt_stop(wdt); + spin_unlock(&wdt->lock); + + return 0; +} + +static int s3c2410wdt_start(struct watchdog_device *wdd) +{ + unsigned long wtcon; + struct s3c2410_wdt *wdt = watchdog_get_drvdata(wdd); + + spin_lock(&wdt->lock); + + __s3c2410wdt_stop(wdt); + + wtcon = readl(wdt->reg_base + S3C2410_WTCON); + wtcon |= S3C2410_WTCON_ENABLE | S3C2410_WTCON_DIV128; + + if (soft_noboot) { + wtcon |= S3C2410_WTCON_INTEN; + wtcon &= ~S3C2410_WTCON_RSTEN; + } else { + wtcon &= ~S3C2410_WTCON_INTEN; + wtcon |= S3C2410_WTCON_RSTEN; + } + + dev_dbg(wdt->dev, "Starting watchdog: count=0x%08x, wtcon=%08lx\n", + wdt->count, wtcon); + + writel(wdt->count, wdt->reg_base + S3C2410_WTDAT); + writel(wdt->count, wdt->reg_base + S3C2410_WTCNT); + writel(wtcon, wdt->reg_base + S3C2410_WTCON); + spin_unlock(&wdt->lock); + + return 0; +} + +static inline int s3c2410wdt_is_running(struct s3c2410_wdt *wdt) +{ + return readl(wdt->reg_base + S3C2410_WTCON) & S3C2410_WTCON_ENABLE; +} + +static int s3c2410wdt_set_heartbeat(struct watchdog_device *wdd, + unsigned int timeout) +{ + struct s3c2410_wdt *wdt = watchdog_get_drvdata(wdd); + unsigned long freq = clk_get_rate(wdt->clock); + unsigned int count; + unsigned int divisor = 1; + unsigned long wtcon; + + if (timeout < 1) + return -EINVAL; + + freq = DIV_ROUND_UP(freq, 128); + count = timeout * freq; + + dev_dbg(wdt->dev, "Heartbeat: count=%d, timeout=%d, freq=%lu\n", + count, timeout, freq); + + /* if the count is bigger than the watchdog register, + then work out what we need to do (and if) we can + actually make this value + */ + + if (count >= 0x10000) { + divisor = DIV_ROUND_UP(count, 0xffff); + + if (divisor > 0x100) { + dev_err(wdt->dev, "timeout %d too big\n", timeout); + return -EINVAL; + } + } + + dev_dbg(wdt->dev, "Heartbeat: timeout=%d, divisor=%d, count=%d (%08x)\n", + timeout, divisor, count, DIV_ROUND_UP(count, divisor)); + + count = DIV_ROUND_UP(count, divisor); + wdt->count = count; + + /* update the pre-scaler */ + wtcon = readl(wdt->reg_base + S3C2410_WTCON); + wtcon &= ~S3C2410_WTCON_PRESCALE_MASK; + wtcon |= S3C2410_WTCON_PRESCALE(divisor-1); + + writel(count, wdt->reg_base + S3C2410_WTDAT); + writel(wtcon, wdt->reg_base + S3C2410_WTCON); + + wdd->timeout = (count * divisor) / freq; + + return 0; +} + +static int s3c2410wdt_restart(struct watchdog_device *wdd, unsigned long action, + void *data) +{ + struct s3c2410_wdt *wdt = watchdog_get_drvdata(wdd); + void __iomem *wdt_base = wdt->reg_base; + + /* disable watchdog, to be safe */ + writel(0, wdt_base + S3C2410_WTCON); + + /* put initial values into count and data */ + writel(0x80, wdt_base + S3C2410_WTCNT); + writel(0x80, wdt_base + S3C2410_WTDAT); + + /* set the watchdog to go and reset... */ + writel(S3C2410_WTCON_ENABLE | S3C2410_WTCON_DIV16 | + S3C2410_WTCON_RSTEN | S3C2410_WTCON_PRESCALE(0x20), + wdt_base + S3C2410_WTCON); + + /* wait for reset to assert... */ + mdelay(500); + + return 0; +} + +#define OPTIONS (WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE) + +static const struct watchdog_info s3c2410_wdt_ident = { + .options = OPTIONS, + .firmware_version = 0, + .identity = "S3C2410 Watchdog", +}; + +static const struct watchdog_ops s3c2410wdt_ops = { + .owner = THIS_MODULE, + .start = s3c2410wdt_start, + .stop = s3c2410wdt_stop, + .ping = s3c2410wdt_keepalive, + .set_timeout = s3c2410wdt_set_heartbeat, + .restart = s3c2410wdt_restart, +}; + +static const struct watchdog_device s3c2410_wdd = { + .info = &s3c2410_wdt_ident, + .ops = &s3c2410wdt_ops, + .timeout = S3C2410_WATCHDOG_DEFAULT_TIME, +}; + +/* interrupt handler code */ + +static irqreturn_t s3c2410wdt_irq(int irqno, void *param) +{ + struct s3c2410_wdt *wdt = platform_get_drvdata(param); + + dev_info(wdt->dev, "watchdog timer expired (irq)\n"); + + s3c2410wdt_keepalive(&wdt->wdt_device); + + if (wdt->drv_data->quirks & QUIRK_HAS_WTCLRINT_REG) + writel(0x1, wdt->reg_base + S3C2410_WTCLRINT); + + return IRQ_HANDLED; +} + +#ifdef CONFIG_ARM_S3C24XX_CPUFREQ + +static int s3c2410wdt_cpufreq_transition(struct notifier_block *nb, + unsigned long val, void *data) +{ + int ret; + struct s3c2410_wdt *wdt = freq_to_wdt(nb); + + if (!s3c2410wdt_is_running(wdt)) + goto done; + + if (val == CPUFREQ_PRECHANGE) { + /* To ensure that over the change we don't cause the + * watchdog to trigger, we perform an keep-alive if + * the watchdog is running. + */ + + s3c2410wdt_keepalive(&wdt->wdt_device); + } else if (val == CPUFREQ_POSTCHANGE) { + s3c2410wdt_stop(&wdt->wdt_device); + + ret = s3c2410wdt_set_heartbeat(&wdt->wdt_device, + wdt->wdt_device.timeout); + + if (ret >= 0) + s3c2410wdt_start(&wdt->wdt_device); + else + goto err; + } + +done: + return 0; + + err: + dev_err(wdt->dev, "cannot set new value for timeout %d\n", + wdt->wdt_device.timeout); + return ret; +} + +static inline int s3c2410wdt_cpufreq_register(struct s3c2410_wdt *wdt) +{ + wdt->freq_transition.notifier_call = s3c2410wdt_cpufreq_transition; + + return cpufreq_register_notifier(&wdt->freq_transition, + CPUFREQ_TRANSITION_NOTIFIER); +} + +static inline void s3c2410wdt_cpufreq_deregister(struct s3c2410_wdt *wdt) +{ + wdt->freq_transition.notifier_call = s3c2410wdt_cpufreq_transition; + + cpufreq_unregister_notifier(&wdt->freq_transition, + CPUFREQ_TRANSITION_NOTIFIER); +} + +#else + +static inline int s3c2410wdt_cpufreq_register(struct s3c2410_wdt *wdt) +{ + return 0; +} + +static inline void s3c2410wdt_cpufreq_deregister(struct s3c2410_wdt *wdt) +{ +} +#endif + +static inline unsigned int s3c2410wdt_get_bootstatus(struct s3c2410_wdt *wdt) +{ + unsigned int rst_stat; + int ret; + + if (!(wdt->drv_data->quirks & QUIRK_HAS_RST_STAT)) + return 0; + + ret = regmap_read(wdt->pmureg, wdt->drv_data->rst_stat_reg, &rst_stat); + if (ret) + dev_warn(wdt->dev, "Couldn't get RST_STAT register\n"); + else if (rst_stat & BIT(wdt->drv_data->rst_stat_bit)) + return WDIOF_CARDRESET; + + return 0; +} + +static inline const struct s3c2410_wdt_variant * +s3c2410_get_wdt_drv_data(struct platform_device *pdev) +{ + const struct s3c2410_wdt_variant *variant; + + variant = of_device_get_match_data(&pdev->dev); + if (!variant) { + /* Device matched by platform_device_id */ + variant = (struct s3c2410_wdt_variant *) + platform_get_device_id(pdev)->driver_data; + } + + return variant; +} + +static int s3c2410wdt_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct s3c2410_wdt *wdt; + struct resource *wdt_mem; + struct resource *wdt_irq; + unsigned int wtcon; + int started = 0; + int ret; + + wdt = devm_kzalloc(dev, sizeof(*wdt), GFP_KERNEL); + if (!wdt) + return -ENOMEM; + + wdt->dev = dev; + spin_lock_init(&wdt->lock); + wdt->wdt_device = s3c2410_wdd; + + wdt->drv_data = s3c2410_get_wdt_drv_data(pdev); + if (wdt->drv_data->quirks & QUIRKS_HAVE_PMUREG) { + wdt->pmureg = syscon_regmap_lookup_by_phandle(dev->of_node, + "samsung,syscon-phandle"); + if (IS_ERR(wdt->pmureg)) { + dev_err(dev, "syscon regmap lookup failed.\n"); + return PTR_ERR(wdt->pmureg); + } + } + + wdt_irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0); + if (wdt_irq == NULL) { + dev_err(dev, "no irq resource specified\n"); + ret = -ENOENT; + goto err; + } + + /* get the memory region for the watchdog timer */ + wdt_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); + wdt->reg_base = devm_ioremap_resource(dev, wdt_mem); + if (IS_ERR(wdt->reg_base)) { + ret = PTR_ERR(wdt->reg_base); + goto err; + } + + wdt->clock = devm_clk_get(dev, "watchdog"); + if (IS_ERR(wdt->clock)) { + dev_err(dev, "failed to find watchdog clock source\n"); + ret = PTR_ERR(wdt->clock); + goto err; + } + + ret = clk_prepare_enable(wdt->clock); + if (ret < 0) { + dev_err(dev, "failed to enable clock\n"); + return ret; + } + + wdt->wdt_device.min_timeout = 1; + wdt->wdt_device.max_timeout = s3c2410wdt_max_timeout(wdt->clock); + + ret = s3c2410wdt_cpufreq_register(wdt); + if (ret < 0) { + dev_err(dev, "failed to register cpufreq\n"); + goto err_clk; + } + + watchdog_set_drvdata(&wdt->wdt_device, wdt); + + /* see if we can actually set the requested timer margin, and if + * not, try the default value */ + + watchdog_init_timeout(&wdt->wdt_device, tmr_margin, dev); + ret = s3c2410wdt_set_heartbeat(&wdt->wdt_device, + wdt->wdt_device.timeout); + if (ret) { + started = s3c2410wdt_set_heartbeat(&wdt->wdt_device, + S3C2410_WATCHDOG_DEFAULT_TIME); + + if (started == 0) + dev_info(dev, + "tmr_margin value out of range, default %d used\n", + S3C2410_WATCHDOG_DEFAULT_TIME); + else + dev_info(dev, "default timer value is out of range, cannot start\n"); + } + + ret = devm_request_irq(dev, wdt_irq->start, s3c2410wdt_irq, 0, + pdev->name, pdev); + if (ret != 0) { + dev_err(dev, "failed to install irq (%d)\n", ret); + goto err_cpufreq; + } + + watchdog_set_nowayout(&wdt->wdt_device, nowayout); + watchdog_set_restart_priority(&wdt->wdt_device, 128); + + wdt->wdt_device.bootstatus = s3c2410wdt_get_bootstatus(wdt); + wdt->wdt_device.parent = dev; + + ret = watchdog_register_device(&wdt->wdt_device); + if (ret) { + dev_err(dev, "cannot register watchdog (%d)\n", ret); + goto err_cpufreq; + } + + ret = s3c2410wdt_mask_and_disable_reset(wdt, false); + if (ret < 0) + goto err_unregister; + + if (tmr_atboot && started == 0) { + dev_info(dev, "starting watchdog timer\n"); + s3c2410wdt_start(&wdt->wdt_device); + } else if (!tmr_atboot) { + /* if we're not enabling the watchdog, then ensure it is + * disabled if it has been left running from the bootloader + * or other source */ + + s3c2410wdt_stop(&wdt->wdt_device); + } + + platform_set_drvdata(pdev, wdt); + + /* print out a statement of readiness */ + + wtcon = readl(wdt->reg_base + S3C2410_WTCON); + + dev_info(dev, "watchdog %sactive, reset %sabled, irq %sabled\n", + (wtcon & S3C2410_WTCON_ENABLE) ? "" : "in", + (wtcon & S3C2410_WTCON_RSTEN) ? "en" : "dis", + (wtcon & S3C2410_WTCON_INTEN) ? "en" : "dis"); + + return 0; + + err_unregister: + watchdog_unregister_device(&wdt->wdt_device); + + err_cpufreq: + s3c2410wdt_cpufreq_deregister(wdt); + + err_clk: + clk_disable_unprepare(wdt->clock); + + err: + return ret; +} + +static int s3c2410wdt_remove(struct platform_device *dev) +{ + int ret; + struct s3c2410_wdt *wdt = platform_get_drvdata(dev); + + ret = s3c2410wdt_mask_and_disable_reset(wdt, true); + if (ret < 0) + return ret; + + watchdog_unregister_device(&wdt->wdt_device); + + s3c2410wdt_cpufreq_deregister(wdt); + + clk_disable_unprepare(wdt->clock); + + return 0; +} + +static void s3c2410wdt_shutdown(struct platform_device *dev) +{ + struct s3c2410_wdt *wdt = platform_get_drvdata(dev); + + s3c2410wdt_mask_and_disable_reset(wdt, true); + + s3c2410wdt_stop(&wdt->wdt_device); +} + +#ifdef CONFIG_PM_SLEEP + +static int s3c2410wdt_suspend(struct device *dev) +{ + int ret; + struct s3c2410_wdt *wdt = dev_get_drvdata(dev); + + /* Save watchdog state, and turn it off. */ + wdt->wtcon_save = readl(wdt->reg_base + S3C2410_WTCON); + wdt->wtdat_save = readl(wdt->reg_base + S3C2410_WTDAT); + + ret = s3c2410wdt_mask_and_disable_reset(wdt, true); + if (ret < 0) + return ret; + + /* Note that WTCNT doesn't need to be saved. */ + s3c2410wdt_stop(&wdt->wdt_device); + + return 0; +} + +static int s3c2410wdt_resume(struct device *dev) +{ + int ret; + struct s3c2410_wdt *wdt = dev_get_drvdata(dev); + + /* Restore watchdog state. */ + writel(wdt->wtdat_save, wdt->reg_base + S3C2410_WTDAT); + writel(wdt->wtdat_save, wdt->reg_base + S3C2410_WTCNT);/* Reset count */ + writel(wdt->wtcon_save, wdt->reg_base + S3C2410_WTCON); + + ret = s3c2410wdt_mask_and_disable_reset(wdt, false); + if (ret < 0) + return ret; + + dev_info(dev, "watchdog %sabled\n", + (wdt->wtcon_save & S3C2410_WTCON_ENABLE) ? "en" : "dis"); + + return 0; +} +#endif + +static SIMPLE_DEV_PM_OPS(s3c2410wdt_pm_ops, s3c2410wdt_suspend, + s3c2410wdt_resume); + +static struct platform_driver s3c2410wdt_driver = { + .probe = s3c2410wdt_probe, + .remove = s3c2410wdt_remove, + .shutdown = s3c2410wdt_shutdown, + .id_table = s3c2410_wdt_ids, + .driver = { + .name = "s3c2410-wdt", + .pm = &s3c2410wdt_pm_ops, + .of_match_table = of_match_ptr(s3c2410_wdt_match), + }, +}; + +module_platform_driver(s3c2410wdt_driver); + +MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>, Dimitry Andric <dimitry.andric@tomtom.com>"); +MODULE_DESCRIPTION("S3C2410 Watchdog Device Driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/watchdog/sa1100_wdt.c b/drivers/watchdog/sa1100_wdt.c new file mode 100644 index 000000000..d3be4f831 --- /dev/null +++ b/drivers/watchdog/sa1100_wdt.c @@ -0,0 +1,219 @@ +/* + * Watchdog driver for the SA11x0/PXA2xx + * + * (c) Copyright 2000 Oleg Drokin <green@crimea.edu> + * Based on SoftDog driver by Alan Cox <alan@lxorguk.ukuu.org.uk> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * Neither Oleg Drokin nor iXcelerator.com admit liability nor provide + * warranty for any of this software. This material is provided + * "AS-IS" and at no charge. + * + * (c) Copyright 2000 Oleg Drokin <green@crimea.edu> + * + * 27/11/2000 Initial release + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/clk.h> +#include <linux/types.h> +#include <linux/kernel.h> +#include <linux/fs.h> +#include <linux/miscdevice.h> +#include <linux/watchdog.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/bitops.h> +#include <linux/uaccess.h> +#include <linux/timex.h> + +#ifdef CONFIG_ARCH_PXA +#include <mach/regs-ost.h> +#endif + +#include <mach/reset.h> +#include <mach/hardware.h> + +static unsigned long oscr_freq; +static unsigned long sa1100wdt_users; +static unsigned int pre_margin; +static int boot_status; + +/* + * Allow only one person to hold it open + */ +static int sa1100dog_open(struct inode *inode, struct file *file) +{ + if (test_and_set_bit(1, &sa1100wdt_users)) + return -EBUSY; + + /* Activate SA1100 Watchdog timer */ + writel_relaxed(readl_relaxed(OSCR) + pre_margin, OSMR3); + writel_relaxed(OSSR_M3, OSSR); + writel_relaxed(OWER_WME, OWER); + writel_relaxed(readl_relaxed(OIER) | OIER_E3, OIER); + return nonseekable_open(inode, file); +} + +/* + * The watchdog cannot be disabled. + * + * Previous comments suggested that turning off the interrupt by + * clearing OIER[E3] would prevent the watchdog timing out but this + * does not appear to be true (at least on the PXA255). + */ +static int sa1100dog_release(struct inode *inode, struct file *file) +{ + pr_crit("Device closed - timer will not stop\n"); + clear_bit(1, &sa1100wdt_users); + return 0; +} + +static ssize_t sa1100dog_write(struct file *file, const char __user *data, + size_t len, loff_t *ppos) +{ + if (len) + /* Refresh OSMR3 timer. */ + writel_relaxed(readl_relaxed(OSCR) + pre_margin, OSMR3); + return len; +} + +static const struct watchdog_info ident = { + .options = WDIOF_CARDRESET | WDIOF_SETTIMEOUT + | WDIOF_KEEPALIVEPING, + .identity = "SA1100/PXA255 Watchdog", + .firmware_version = 1, +}; + +static long sa1100dog_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) +{ + int ret = -ENOTTY; + int time; + void __user *argp = (void __user *)arg; + int __user *p = argp; + + switch (cmd) { + case WDIOC_GETSUPPORT: + ret = copy_to_user(argp, &ident, + sizeof(ident)) ? -EFAULT : 0; + break; + + case WDIOC_GETSTATUS: + ret = put_user(0, p); + break; + + case WDIOC_GETBOOTSTATUS: + ret = put_user(boot_status, p); + break; + + case WDIOC_KEEPALIVE: + writel_relaxed(readl_relaxed(OSCR) + pre_margin, OSMR3); + ret = 0; + break; + + case WDIOC_SETTIMEOUT: + ret = get_user(time, p); + if (ret) + break; + + if (time <= 0 || (oscr_freq * (long long)time >= 0xffffffff)) { + ret = -EINVAL; + break; + } + + pre_margin = oscr_freq * time; + writel_relaxed(readl_relaxed(OSCR) + pre_margin, OSMR3); + /*fall through*/ + + case WDIOC_GETTIMEOUT: + ret = put_user(pre_margin / oscr_freq, p); + break; + } + return ret; +} + +static const struct file_operations sa1100dog_fops = { + .owner = THIS_MODULE, + .llseek = no_llseek, + .write = sa1100dog_write, + .unlocked_ioctl = sa1100dog_ioctl, + .open = sa1100dog_open, + .release = sa1100dog_release, +}; + +static struct miscdevice sa1100dog_miscdev = { + .minor = WATCHDOG_MINOR, + .name = "watchdog", + .fops = &sa1100dog_fops, +}; + +static int margin __initdata = 60; /* (secs) Default is 1 minute */ +static struct clk *clk; + +static int __init sa1100dog_init(void) +{ + int ret; + + clk = clk_get(NULL, "OSTIMER0"); + if (IS_ERR(clk)) { + pr_err("SA1100/PXA2xx Watchdog Timer: clock not found: %d\n", + (int) PTR_ERR(clk)); + return PTR_ERR(clk); + } + + ret = clk_prepare_enable(clk); + if (ret) { + pr_err("SA1100/PXA2xx Watchdog Timer: clock failed to prepare+enable: %d\n", + ret); + goto err; + } + + oscr_freq = clk_get_rate(clk); + + /* + * Read the reset status, and save it for later. If + * we suspend, RCSR will be cleared, and the watchdog + * reset reason will be lost. + */ + boot_status = (reset_status & RESET_STATUS_WATCHDOG) ? + WDIOF_CARDRESET : 0; + pre_margin = oscr_freq * margin; + + ret = misc_register(&sa1100dog_miscdev); + if (ret == 0) { + pr_info("SA1100/PXA2xx Watchdog Timer: timer margin %d sec\n", + margin); + return 0; + } + + clk_disable_unprepare(clk); +err: + clk_put(clk); + return ret; +} + +static void __exit sa1100dog_exit(void) +{ + misc_deregister(&sa1100dog_miscdev); + clk_disable_unprepare(clk); + clk_put(clk); +} + +module_init(sa1100dog_init); +module_exit(sa1100dog_exit); + +MODULE_AUTHOR("Oleg Drokin <green@crimea.edu>"); +MODULE_DESCRIPTION("SA1100/PXA2xx Watchdog"); + +module_param(margin, int, 0); +MODULE_PARM_DESC(margin, "Watchdog margin in seconds (default 60s)"); + +MODULE_LICENSE("GPL"); diff --git a/drivers/watchdog/sama5d4_wdt.c b/drivers/watchdog/sama5d4_wdt.c new file mode 100644 index 000000000..d4953365d --- /dev/null +++ b/drivers/watchdog/sama5d4_wdt.c @@ -0,0 +1,324 @@ +/* + * Driver for Atmel SAMA5D4 Watchdog Timer + * + * Copyright (C) 2015 Atmel Corporation + * + * Licensed under GPLv2. + */ + +#include <linux/delay.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_irq.h> +#include <linux/platform_device.h> +#include <linux/reboot.h> +#include <linux/watchdog.h> + +#include "at91sam9_wdt.h" + +/* minimum and maximum watchdog timeout, in seconds */ +#define MIN_WDT_TIMEOUT 1 +#define MAX_WDT_TIMEOUT 16 +#define WDT_DEFAULT_TIMEOUT MAX_WDT_TIMEOUT + +#define WDT_SEC2TICKS(s) ((s) ? (((s) << 8) - 1) : 0) + +struct sama5d4_wdt { + struct watchdog_device wdd; + void __iomem *reg_base; + u32 mr; + unsigned long last_ping; +}; + +static int wdt_timeout; +static bool nowayout = WATCHDOG_NOWAYOUT; + +module_param(wdt_timeout, int, 0); +MODULE_PARM_DESC(wdt_timeout, + "Watchdog timeout in seconds. (default = " + __MODULE_STRING(WDT_DEFAULT_TIMEOUT) ")"); + +module_param(nowayout, bool, 0); +MODULE_PARM_DESC(nowayout, + "Watchdog cannot be stopped once started (default=" + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); + +#define wdt_enabled (!(wdt->mr & AT91_WDT_WDDIS)) + +#define wdt_read(wdt, field) \ + readl_relaxed((wdt)->reg_base + (field)) + +/* 4 slow clock periods is 4/32768 = 122.07µs*/ +#define WDT_DELAY usecs_to_jiffies(123) + +static void wdt_write(struct sama5d4_wdt *wdt, u32 field, u32 val) +{ + /* + * WDT_CR and WDT_MR must not be modified within three slow clock + * periods following a restart of the watchdog performed by a write + * access in WDT_CR. + */ + while (time_before(jiffies, wdt->last_ping + WDT_DELAY)) + usleep_range(30, 125); + writel_relaxed(val, wdt->reg_base + field); + wdt->last_ping = jiffies; +} + +static void wdt_write_nosleep(struct sama5d4_wdt *wdt, u32 field, u32 val) +{ + if (time_before(jiffies, wdt->last_ping + WDT_DELAY)) + udelay(123); + writel_relaxed(val, wdt->reg_base + field); + wdt->last_ping = jiffies; +} + +static int sama5d4_wdt_start(struct watchdog_device *wdd) +{ + struct sama5d4_wdt *wdt = watchdog_get_drvdata(wdd); + + wdt->mr &= ~AT91_WDT_WDDIS; + wdt_write(wdt, AT91_WDT_MR, wdt->mr); + + return 0; +} + +static int sama5d4_wdt_stop(struct watchdog_device *wdd) +{ + struct sama5d4_wdt *wdt = watchdog_get_drvdata(wdd); + + wdt->mr |= AT91_WDT_WDDIS; + wdt_write(wdt, AT91_WDT_MR, wdt->mr); + + return 0; +} + +static int sama5d4_wdt_ping(struct watchdog_device *wdd) +{ + struct sama5d4_wdt *wdt = watchdog_get_drvdata(wdd); + + wdt_write(wdt, AT91_WDT_CR, AT91_WDT_KEY | AT91_WDT_WDRSTT); + + return 0; +} + +static int sama5d4_wdt_set_timeout(struct watchdog_device *wdd, + unsigned int timeout) +{ + struct sama5d4_wdt *wdt = watchdog_get_drvdata(wdd); + u32 value = WDT_SEC2TICKS(timeout); + + wdt->mr &= ~AT91_WDT_WDV; + wdt->mr |= AT91_WDT_SET_WDV(value); + + /* + * WDDIS has to be 0 when updating WDD/WDV. The datasheet states: When + * setting the WDDIS bit, and while it is set, the fields WDV and WDD + * must not be modified. + * If the watchdog is enabled, then the timeout can be updated. Else, + * wait that the user enables it. + */ + if (wdt_enabled) + wdt_write(wdt, AT91_WDT_MR, wdt->mr & ~AT91_WDT_WDDIS); + + wdd->timeout = timeout; + + return 0; +} + +static const struct watchdog_info sama5d4_wdt_info = { + .options = WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE | WDIOF_KEEPALIVEPING, + .identity = "Atmel SAMA5D4 Watchdog", +}; + +static const struct watchdog_ops sama5d4_wdt_ops = { + .owner = THIS_MODULE, + .start = sama5d4_wdt_start, + .stop = sama5d4_wdt_stop, + .ping = sama5d4_wdt_ping, + .set_timeout = sama5d4_wdt_set_timeout, +}; + +static irqreturn_t sama5d4_wdt_irq_handler(int irq, void *dev_id) +{ + struct sama5d4_wdt *wdt = platform_get_drvdata(dev_id); + + if (wdt_read(wdt, AT91_WDT_SR)) { + pr_crit("Atmel Watchdog Software Reset\n"); + emergency_restart(); + pr_crit("Reboot didn't succeed\n"); + } + + return IRQ_HANDLED; +} + +static int of_sama5d4_wdt_init(struct device_node *np, struct sama5d4_wdt *wdt) +{ + const char *tmp; + + wdt->mr = AT91_WDT_WDDIS; + + if (!of_property_read_string(np, "atmel,watchdog-type", &tmp) && + !strcmp(tmp, "software")) + wdt->mr |= AT91_WDT_WDFIEN; + else + wdt->mr |= AT91_WDT_WDRSTEN; + + if (of_property_read_bool(np, "atmel,idle-halt")) + wdt->mr |= AT91_WDT_WDIDLEHLT; + + if (of_property_read_bool(np, "atmel,dbg-halt")) + wdt->mr |= AT91_WDT_WDDBGHLT; + + return 0; +} + +static int sama5d4_wdt_init(struct sama5d4_wdt *wdt) +{ + u32 reg; + /* + * When booting and resuming, the bootloader may have changed the + * watchdog configuration. + * If the watchdog is already running, we can safely update it. + * Else, we have to disable it properly. + */ + if (wdt_enabled) { + wdt_write_nosleep(wdt, AT91_WDT_MR, wdt->mr); + } else { + reg = wdt_read(wdt, AT91_WDT_MR); + if (!(reg & AT91_WDT_WDDIS)) + wdt_write_nosleep(wdt, AT91_WDT_MR, + reg | AT91_WDT_WDDIS); + } + return 0; +} + +static int sama5d4_wdt_probe(struct platform_device *pdev) +{ + struct watchdog_device *wdd; + struct sama5d4_wdt *wdt; + struct resource *res; + void __iomem *regs; + u32 irq = 0; + u32 timeout; + int ret; + + wdt = devm_kzalloc(&pdev->dev, sizeof(*wdt), GFP_KERNEL); + if (!wdt) + return -ENOMEM; + + wdd = &wdt->wdd; + wdd->timeout = WDT_DEFAULT_TIMEOUT; + wdd->info = &sama5d4_wdt_info; + wdd->ops = &sama5d4_wdt_ops; + wdd->min_timeout = MIN_WDT_TIMEOUT; + wdd->max_timeout = MAX_WDT_TIMEOUT; + wdt->last_ping = jiffies; + + watchdog_set_drvdata(wdd, wdt); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + regs = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(regs)) + return PTR_ERR(regs); + + wdt->reg_base = regs; + + irq = irq_of_parse_and_map(pdev->dev.of_node, 0); + if (!irq) + dev_warn(&pdev->dev, "failed to get IRQ from DT\n"); + + ret = of_sama5d4_wdt_init(pdev->dev.of_node, wdt); + if (ret) + return ret; + + if ((wdt->mr & AT91_WDT_WDFIEN) && irq) { + ret = devm_request_irq(&pdev->dev, irq, sama5d4_wdt_irq_handler, + IRQF_SHARED | IRQF_IRQPOLL | + IRQF_NO_SUSPEND, pdev->name, pdev); + if (ret) { + dev_err(&pdev->dev, + "cannot register interrupt handler\n"); + return ret; + } + } + + watchdog_init_timeout(wdd, wdt_timeout, &pdev->dev); + + timeout = WDT_SEC2TICKS(wdd->timeout); + + wdt->mr |= AT91_WDT_SET_WDD(WDT_SEC2TICKS(MAX_WDT_TIMEOUT)); + wdt->mr |= AT91_WDT_SET_WDV(timeout); + + ret = sama5d4_wdt_init(wdt); + if (ret) + return ret; + + watchdog_set_nowayout(wdd, nowayout); + + ret = watchdog_register_device(wdd); + if (ret) { + dev_err(&pdev->dev, "failed to register watchdog device\n"); + return ret; + } + + platform_set_drvdata(pdev, wdt); + + dev_info(&pdev->dev, "initialized (timeout = %d sec, nowayout = %d)\n", + wdd->timeout, nowayout); + + return 0; +} + +static int sama5d4_wdt_remove(struct platform_device *pdev) +{ + struct sama5d4_wdt *wdt = platform_get_drvdata(pdev); + + sama5d4_wdt_stop(&wdt->wdd); + + watchdog_unregister_device(&wdt->wdd); + + return 0; +} + +static const struct of_device_id sama5d4_wdt_of_match[] = { + { .compatible = "atmel,sama5d4-wdt", }, + { } +}; +MODULE_DEVICE_TABLE(of, sama5d4_wdt_of_match); + +#ifdef CONFIG_PM_SLEEP +static int sama5d4_wdt_resume(struct device *dev) +{ + struct sama5d4_wdt *wdt = dev_get_drvdata(dev); + + /* + * FIXME: writing MR also pings the watchdog which may not be desired. + * This should only be done when the registers are lost on suspend but + * there is no way to get this information right now. + */ + sama5d4_wdt_init(wdt); + + return 0; +} +#endif + +static SIMPLE_DEV_PM_OPS(sama5d4_wdt_pm_ops, NULL, + sama5d4_wdt_resume); + +static struct platform_driver sama5d4_wdt_driver = { + .probe = sama5d4_wdt_probe, + .remove = sama5d4_wdt_remove, + .driver = { + .name = "sama5d4_wdt", + .pm = &sama5d4_wdt_pm_ops, + .of_match_table = sama5d4_wdt_of_match, + } +}; +module_platform_driver(sama5d4_wdt_driver); + +MODULE_AUTHOR("Atmel Corporation"); +MODULE_DESCRIPTION("Atmel SAMA5D4 Watchdog Timer driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/watchdog/sb_wdog.c b/drivers/watchdog/sb_wdog.c new file mode 100644 index 000000000..3abae5077 --- /dev/null +++ b/drivers/watchdog/sb_wdog.c @@ -0,0 +1,361 @@ +/* + * Watchdog driver for SiByte SB1 SoCs + * + * Copyright (C) 2007 OnStor, Inc. * Andrew Sharp <andy.sharp@lsi.com> + * + * This driver is intended to make the second of two hardware watchdogs + * on the Sibyte 12XX and 11XX SoCs available to the user. There are two + * such devices available on the SoC, but it seems that there isn't an + * enumeration class for watchdogs in Linux like there is for RTCs. + * The second is used rather than the first because it uses IRQ 1, + * thereby avoiding all that IRQ 0 problematic nonsense. + * + * I have not tried this driver on a 1480 processor; it might work + * just well enough to really screw things up. + * + * It is a simple timer, and there is an interrupt that is raised the + * first time the timer expires. The second time it expires, the chip + * is reset and there is no way to redirect that NMI. Which could + * be problematic in some cases where this chip is sitting on the HT + * bus and has just taken responsibility for providing a cache block. + * Since the reset can't be redirected to the external reset pin, it is + * possible that other HT connected processors might hang and not reset. + * For Linux, a soft reset would probably be even worse than a hard reset. + * There you have it. + * + * The timer takes 23 bits of a 64 bit register (?) as a count value, + * and decrements the count every microsecond, for a max value of + * 0x7fffff usec or about 8.3ish seconds. + * + * This watchdog borrows some user semantics from the softdog driver, + * in that if you close the fd, it leaves the watchdog running, unless + * you previously wrote a 'V' to the fd, in which case it disables + * the watchdog when you close the fd like some other drivers. + * + * Based on various other watchdog drivers, which are probably all + * loosely based on something Alan Cox wrote years ago. + * + * (c) Copyright 1996 Alan Cox <alan@lxorguk.ukuu.org.uk>, + * All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 1 or 2 as published by the Free Software Foundation. + * + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/module.h> +#include <linux/io.h> +#include <linux/uaccess.h> +#include <linux/fs.h> +#include <linux/reboot.h> +#include <linux/miscdevice.h> +#include <linux/watchdog.h> +#include <linux/interrupt.h> + +#include <asm/sibyte/sb1250.h> +#include <asm/sibyte/sb1250_regs.h> +#include <asm/sibyte/sb1250_int.h> +#include <asm/sibyte/sb1250_scd.h> + +static DEFINE_SPINLOCK(sbwd_lock); + +/* + * set the initial count value of a timer + * + * wdog is the iomem address of the cfg register + */ +void sbwdog_set(char __iomem *wdog, unsigned long t) +{ + spin_lock(&sbwd_lock); + __raw_writeb(0, wdog); + __raw_writeq(t & 0x7fffffUL, wdog - 0x10); + spin_unlock(&sbwd_lock); +} + +/* + * cause the timer to [re]load it's initial count and start counting + * all over again + * + * wdog is the iomem address of the cfg register + */ +void sbwdog_pet(char __iomem *wdog) +{ + spin_lock(&sbwd_lock); + __raw_writeb(__raw_readb(wdog) | 1, wdog); + spin_unlock(&sbwd_lock); +} + +static unsigned long sbwdog_gate; /* keeps it to one thread only */ +static char __iomem *kern_dog = (char __iomem *)(IO_BASE + (A_SCD_WDOG_CFG_0)); +static char __iomem *user_dog = (char __iomem *)(IO_BASE + (A_SCD_WDOG_CFG_1)); +static unsigned long timeout = 0x7fffffUL; /* useconds: 8.3ish secs. */ +static int expect_close; + +static const struct watchdog_info ident = { + .options = WDIOF_CARDRESET | WDIOF_SETTIMEOUT | + WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE, + .identity = "SiByte Watchdog", +}; + +/* + * Allow only a single thread to walk the dog + */ +static int sbwdog_open(struct inode *inode, struct file *file) +{ + nonseekable_open(inode, file); + if (test_and_set_bit(0, &sbwdog_gate)) + return -EBUSY; + __module_get(THIS_MODULE); + + /* + * Activate the timer + */ + sbwdog_set(user_dog, timeout); + __raw_writeb(1, user_dog); + + return 0; +} + +/* + * Put the dog back in the kennel. + */ +static int sbwdog_release(struct inode *inode, struct file *file) +{ + if (expect_close == 42) { + __raw_writeb(0, user_dog); + module_put(THIS_MODULE); + } else { + pr_crit("%s: Unexpected close, not stopping watchdog!\n", + ident.identity); + sbwdog_pet(user_dog); + } + clear_bit(0, &sbwdog_gate); + expect_close = 0; + + return 0; +} + +/* + * 42 - the answer + */ +static ssize_t sbwdog_write(struct file *file, const char __user *data, + size_t len, loff_t *ppos) +{ + int i; + + if (len) { + /* + * restart the timer + */ + expect_close = 0; + + for (i = 0; i != len; i++) { + char c; + + if (get_user(c, data + i)) + return -EFAULT; + if (c == 'V') + expect_close = 42; + } + sbwdog_pet(user_dog); + } + + return len; +} + +static long sbwdog_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) +{ + int ret = -ENOTTY; + unsigned long time; + void __user *argp = (void __user *)arg; + int __user *p = argp; + + switch (cmd) { + case WDIOC_GETSUPPORT: + ret = copy_to_user(argp, &ident, sizeof(ident)) ? -EFAULT : 0; + break; + + case WDIOC_GETSTATUS: + case WDIOC_GETBOOTSTATUS: + ret = put_user(0, p); + break; + + case WDIOC_KEEPALIVE: + sbwdog_pet(user_dog); + ret = 0; + break; + + case WDIOC_SETTIMEOUT: + ret = get_user(time, p); + if (ret) + break; + + time *= 1000000; + if (time > 0x7fffffUL) { + ret = -EINVAL; + break; + } + timeout = time; + sbwdog_set(user_dog, timeout); + sbwdog_pet(user_dog); + + case WDIOC_GETTIMEOUT: + /* + * get the remaining count from the ... count register + * which is 1*8 before the config register + */ + ret = put_user((u32)__raw_readq(user_dog - 8) / 1000000, p); + break; + } + return ret; +} + +/* + * Notifier for system down + */ +static int sbwdog_notify_sys(struct notifier_block *this, unsigned long code, + void *erf) +{ + if (code == SYS_DOWN || code == SYS_HALT) { + /* + * sit and sit + */ + __raw_writeb(0, user_dog); + __raw_writeb(0, kern_dog); + } + + return NOTIFY_DONE; +} + +static const struct file_operations sbwdog_fops = { + .owner = THIS_MODULE, + .llseek = no_llseek, + .write = sbwdog_write, + .unlocked_ioctl = sbwdog_ioctl, + .open = sbwdog_open, + .release = sbwdog_release, +}; + +static struct miscdevice sbwdog_miscdev = { + .minor = WATCHDOG_MINOR, + .name = "watchdog", + .fops = &sbwdog_fops, +}; + +static struct notifier_block sbwdog_notifier = { + .notifier_call = sbwdog_notify_sys, +}; + +/* + * interrupt handler + * + * doesn't do a whole lot for user, but oh so cleverly written so kernel + * code can use it to re-up the watchdog, thereby saving the kernel from + * having to create and maintain a timer, just to tickle another timer, + * which is just so wrong. + */ +irqreturn_t sbwdog_interrupt(int irq, void *addr) +{ + unsigned long wd_init; + char *wd_cfg_reg = (char *)addr; + u8 cfg; + + cfg = __raw_readb(wd_cfg_reg); + wd_init = __raw_readq(wd_cfg_reg - 8) & 0x7fffff; + + /* + * if it's the second watchdog timer, it's for those users + */ + if (wd_cfg_reg == user_dog) + pr_crit("%s in danger of initiating system reset " + "in %ld.%01ld seconds\n", + ident.identity, + wd_init / 1000000, (wd_init / 100000) % 10); + else + cfg |= 1; + + __raw_writeb(cfg, wd_cfg_reg); + + return IRQ_HANDLED; +} + +static int __init sbwdog_init(void) +{ + int ret; + + /* + * register a reboot notifier + */ + ret = register_reboot_notifier(&sbwdog_notifier); + if (ret) { + pr_err("%s: cannot register reboot notifier (err=%d)\n", + ident.identity, ret); + return ret; + } + + /* + * get the resources + */ + + ret = request_irq(1, sbwdog_interrupt, IRQF_SHARED, + ident.identity, (void *)user_dog); + if (ret) { + pr_err("%s: failed to request irq 1 - %d\n", + ident.identity, ret); + goto out; + } + + ret = misc_register(&sbwdog_miscdev); + if (ret == 0) { + pr_info("%s: timeout is %ld.%ld secs\n", + ident.identity, + timeout / 1000000, (timeout / 100000) % 10); + return 0; + } + free_irq(1, (void *)user_dog); +out: + unregister_reboot_notifier(&sbwdog_notifier); + + return ret; +} + +static void __exit sbwdog_exit(void) +{ + misc_deregister(&sbwdog_miscdev); + free_irq(1, (void *)user_dog); + unregister_reboot_notifier(&sbwdog_notifier); +} + +module_init(sbwdog_init); +module_exit(sbwdog_exit); + +MODULE_AUTHOR("Andrew Sharp <andy.sharp@lsi.com>"); +MODULE_DESCRIPTION("SiByte Watchdog"); + +module_param(timeout, ulong, 0); +MODULE_PARM_DESC(timeout, + "Watchdog timeout in microseconds (max/default 8388607 or 8.3ish secs)"); + +MODULE_LICENSE("GPL"); + +/* + * example code that can be put in a platform code area to utilize the + * first watchdog timer for the kernels own purpose. + +void platform_wd_setup(void) +{ + int ret; + + ret = request_irq(1, sbwdog_interrupt, IRQF_SHARED, + "Kernel Watchdog", IOADDR(A_SCD_WDOG_CFG_0)); + if (ret) { + pr_crit("Watchdog IRQ zero(0) failed to be requested - %d\n", ret); + } +} + + + */ diff --git a/drivers/watchdog/sbc60xxwdt.c b/drivers/watchdog/sbc60xxwdt.c new file mode 100644 index 000000000..1702df7f8 --- /dev/null +++ b/drivers/watchdog/sbc60xxwdt.c @@ -0,0 +1,389 @@ +/* + * 60xx Single Board Computer Watchdog Timer driver for Linux 2.2.x + * + * Based on acquirewdt.c by Alan Cox. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * The author does NOT admit liability nor provide warranty for + * any of this software. This material is provided "AS-IS" in + * the hope that it may be useful for others. + * + * (c) Copyright 2000 Jakob Oestergaard <jakob@unthought.net> + * + * 12/4 - 2000 [Initial revision] + * 25/4 - 2000 Added /dev/watchdog support + * 09/5 - 2001 [smj@oro.net] fixed fop_write to "return 1" + * on success + * 12/4 - 2002 [rob@osinvestor.com] eliminate fop_read + * fix possible wdt_is_open race + * add CONFIG_WATCHDOG_NOWAYOUT support + * remove lock_kernel/unlock_kernel pairs + * added KERN_* to printk's + * got rid of extraneous comments + * changed watchdog_info to correctly reflect what + * the driver offers + * added WDIOC_GETSTATUS, WDIOC_GETBOOTSTATUS, + * WDIOC_SETTIMEOUT, WDIOC_GETTIMEOUT, and + * WDIOC_SETOPTIONS ioctls + * 09/8 - 2003 [wim@iguana.be] cleanup of trailing spaces + * use module_param + * made timeout (the emulated heartbeat) a + * module_param + * made the keepalive ping an internal subroutine + * made wdt_stop and wdt_start module params + * added extra printk's for startup problems + * added MODULE_AUTHOR and MODULE_DESCRIPTION info + * + * + * This WDT driver is different from the other Linux WDT + * drivers in the following ways: + * *) The driver will ping the watchdog by itself, because this + * particular WDT has a very short timeout (one second) and it + * would be insane to count on any userspace daemon always + * getting scheduled within that time frame. + * + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/types.h> +#include <linux/timer.h> +#include <linux/jiffies.h> +#include <linux/miscdevice.h> +#include <linux/watchdog.h> +#include <linux/fs.h> +#include <linux/ioport.h> +#include <linux/notifier.h> +#include <linux/reboot.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/uaccess.h> + + +#define OUR_NAME "sbc60xxwdt" +#define PFX OUR_NAME ": " + +/* + * You must set these - The driver cannot probe for the settings + */ + +static int wdt_stop = 0x45; +module_param(wdt_stop, int, 0); +MODULE_PARM_DESC(wdt_stop, "SBC60xx WDT 'stop' io port (default 0x45)"); + +static int wdt_start = 0x443; +module_param(wdt_start, int, 0); +MODULE_PARM_DESC(wdt_start, "SBC60xx WDT 'start' io port (default 0x443)"); + +/* + * The 60xx board can use watchdog timeout values from one second + * to several minutes. The default is one second, so if we reset + * the watchdog every ~250ms we should be safe. + */ + +#define WDT_INTERVAL (HZ/4+1) + +/* + * We must not require too good response from the userspace daemon. + * Here we require the userspace daemon to send us a heartbeat + * char to /dev/watchdog every 30 seconds. + * If the daemon pulses us every 25 seconds, we can still afford + * a 5 second scheduling delay on the (high priority) daemon. That + * should be sufficient for a box under any load. + */ + +#define WATCHDOG_TIMEOUT 30 /* 30 sec default timeout */ +static int timeout = WATCHDOG_TIMEOUT; /* in seconds, multiplied by HZ to + get seconds to wait for a ping */ +module_param(timeout, int, 0); +MODULE_PARM_DESC(timeout, + "Watchdog timeout in seconds. (1<=timeout<=3600, default=" + __MODULE_STRING(WATCHDOG_TIMEOUT) ")"); + +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); +MODULE_PARM_DESC(nowayout, + "Watchdog cannot be stopped once started (default=" + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); + +static void wdt_timer_ping(struct timer_list *); +static DEFINE_TIMER(timer, wdt_timer_ping); +static unsigned long next_heartbeat; +static unsigned long wdt_is_open; +static char wdt_expect_close; + +/* + * Whack the dog + */ + +static void wdt_timer_ping(struct timer_list *unused) +{ + /* If we got a heartbeat pulse within the WDT_US_INTERVAL + * we agree to ping the WDT + */ + if (time_before(jiffies, next_heartbeat)) { + /* Ping the WDT by reading from wdt_start */ + inb_p(wdt_start); + /* Re-set the timer interval */ + mod_timer(&timer, jiffies + WDT_INTERVAL); + } else + pr_warn("Heartbeat lost! Will not ping the watchdog\n"); +} + +/* + * Utility routines + */ + +static void wdt_startup(void) +{ + next_heartbeat = jiffies + (timeout * HZ); + + /* Start the timer */ + mod_timer(&timer, jiffies + WDT_INTERVAL); + pr_info("Watchdog timer is now enabled\n"); +} + +static void wdt_turnoff(void) +{ + /* Stop the timer */ + del_timer_sync(&timer); + inb_p(wdt_stop); + pr_info("Watchdog timer is now disabled...\n"); +} + +static void wdt_keepalive(void) +{ + /* user land ping */ + next_heartbeat = jiffies + (timeout * HZ); +} + +/* + * /dev/watchdog handling + */ + +static ssize_t fop_write(struct file *file, const char __user *buf, + size_t count, loff_t *ppos) +{ + /* See if we got the magic character 'V' and reload the timer */ + if (count) { + if (!nowayout) { + size_t ofs; + + /* note: just in case someone wrote the + magic character five months ago... */ + wdt_expect_close = 0; + + /* scan to see whether or not we got the + magic character */ + for (ofs = 0; ofs != count; ofs++) { + char c; + if (get_user(c, buf + ofs)) + return -EFAULT; + if (c == 'V') + wdt_expect_close = 42; + } + } + + /* Well, anyhow someone wrote to us, we should + return that favour */ + wdt_keepalive(); + } + return count; +} + +static int fop_open(struct inode *inode, struct file *file) +{ + /* Just in case we're already talking to someone... */ + if (test_and_set_bit(0, &wdt_is_open)) + return -EBUSY; + + if (nowayout) + __module_get(THIS_MODULE); + + /* Good, fire up the show */ + wdt_startup(); + return nonseekable_open(inode, file); +} + +static int fop_close(struct inode *inode, struct file *file) +{ + if (wdt_expect_close == 42) + wdt_turnoff(); + else { + del_timer(&timer); + pr_crit("device file closed unexpectedly. Will not stop the WDT!\n"); + } + clear_bit(0, &wdt_is_open); + wdt_expect_close = 0; + return 0; +} + +static long fop_ioctl(struct file *file, unsigned int cmd, unsigned long arg) +{ + void __user *argp = (void __user *)arg; + int __user *p = argp; + static const struct watchdog_info ident = { + .options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT | + WDIOF_MAGICCLOSE, + .firmware_version = 1, + .identity = "SBC60xx", + }; + + switch (cmd) { + case WDIOC_GETSUPPORT: + return copy_to_user(argp, &ident, sizeof(ident)) ? -EFAULT : 0; + case WDIOC_GETSTATUS: + case WDIOC_GETBOOTSTATUS: + return put_user(0, p); + case WDIOC_SETOPTIONS: + { + int new_options, retval = -EINVAL; + if (get_user(new_options, p)) + return -EFAULT; + if (new_options & WDIOS_DISABLECARD) { + wdt_turnoff(); + retval = 0; + } + if (new_options & WDIOS_ENABLECARD) { + wdt_startup(); + retval = 0; + } + return retval; + } + case WDIOC_KEEPALIVE: + wdt_keepalive(); + return 0; + case WDIOC_SETTIMEOUT: + { + int new_timeout; + if (get_user(new_timeout, p)) + return -EFAULT; + /* arbitrary upper limit */ + if (new_timeout < 1 || new_timeout > 3600) + return -EINVAL; + + timeout = new_timeout; + wdt_keepalive(); + /* Fall through */ + } + case WDIOC_GETTIMEOUT: + return put_user(timeout, p); + default: + return -ENOTTY; + } +} + +static const struct file_operations wdt_fops = { + .owner = THIS_MODULE, + .llseek = no_llseek, + .write = fop_write, + .open = fop_open, + .release = fop_close, + .unlocked_ioctl = fop_ioctl, +}; + +static struct miscdevice wdt_miscdev = { + .minor = WATCHDOG_MINOR, + .name = "watchdog", + .fops = &wdt_fops, +}; + +/* + * Notifier for system down + */ + +static int wdt_notify_sys(struct notifier_block *this, unsigned long code, + void *unused) +{ + if (code == SYS_DOWN || code == SYS_HALT) + wdt_turnoff(); + return NOTIFY_DONE; +} + +/* + * The WDT needs to learn about soft shutdowns in order to + * turn the timebomb registers off. + */ + +static struct notifier_block wdt_notifier = { + .notifier_call = wdt_notify_sys, +}; + +static void __exit sbc60xxwdt_unload(void) +{ + wdt_turnoff(); + + /* Deregister */ + misc_deregister(&wdt_miscdev); + + unregister_reboot_notifier(&wdt_notifier); + if ((wdt_stop != 0x45) && (wdt_stop != wdt_start)) + release_region(wdt_stop, 1); + release_region(wdt_start, 1); +} + +static int __init sbc60xxwdt_init(void) +{ + int rc = -EBUSY; + + if (timeout < 1 || timeout > 3600) { /* arbitrary upper limit */ + timeout = WATCHDOG_TIMEOUT; + pr_info("timeout value must be 1 <= x <= 3600, using %d\n", + timeout); + } + + if (!request_region(wdt_start, 1, "SBC 60XX WDT")) { + pr_err("I/O address 0x%04x already in use\n", wdt_start); + rc = -EIO; + goto err_out; + } + + /* We cannot reserve 0x45 - the kernel already has! */ + if (wdt_stop != 0x45 && wdt_stop != wdt_start) { + if (!request_region(wdt_stop, 1, "SBC 60XX WDT")) { + pr_err("I/O address 0x%04x already in use\n", wdt_stop); + rc = -EIO; + goto err_out_region1; + } + } + + rc = register_reboot_notifier(&wdt_notifier); + if (rc) { + pr_err("cannot register reboot notifier (err=%d)\n", rc); + goto err_out_region2; + } + + rc = misc_register(&wdt_miscdev); + if (rc) { + pr_err("cannot register miscdev on minor=%d (err=%d)\n", + wdt_miscdev.minor, rc); + goto err_out_reboot; + } + pr_info("WDT driver for 60XX single board computer initialised. timeout=%d sec (nowayout=%d)\n", + timeout, nowayout); + + return 0; + +err_out_reboot: + unregister_reboot_notifier(&wdt_notifier); +err_out_region2: + if (wdt_stop != 0x45 && wdt_stop != wdt_start) + release_region(wdt_stop, 1); +err_out_region1: + release_region(wdt_start, 1); +err_out: + return rc; +} + +module_init(sbc60xxwdt_init); +module_exit(sbc60xxwdt_unload); + +MODULE_AUTHOR("Jakob Oestergaard <jakob@unthought.net>"); +MODULE_DESCRIPTION("60xx Single Board Computer Watchdog Timer driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/watchdog/sbc7240_wdt.c b/drivers/watchdog/sbc7240_wdt.c new file mode 100644 index 000000000..5f268add1 --- /dev/null +++ b/drivers/watchdog/sbc7240_wdt.c @@ -0,0 +1,311 @@ +/* + * NANO7240 SBC Watchdog device driver + * + * Based on w83877f.c by Scott Jennings, + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation; + * + * Software distributed under the License is distributed on an "AS IS" + * basis, WITHOUT WARRANTY OF ANY KIND, either express or + * implied. See the License for the specific language governing + * rights and limitations under the License. + * + * (c) Copyright 2007 Gilles GIGAN <gilles.gigan@jcu.edu.au> + * + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/fs.h> +#include <linux/init.h> +#include <linux/ioport.h> +#include <linux/jiffies.h> +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/miscdevice.h> +#include <linux/notifier.h> +#include <linux/reboot.h> +#include <linux/types.h> +#include <linux/watchdog.h> +#include <linux/io.h> +#include <linux/uaccess.h> +#include <linux/atomic.h> + +#define SBC7240_ENABLE_PORT 0x443 +#define SBC7240_DISABLE_PORT 0x043 +#define SBC7240_SET_TIMEOUT_PORT SBC7240_ENABLE_PORT +#define SBC7240_MAGIC_CHAR 'V' + +#define SBC7240_TIMEOUT 30 +#define SBC7240_MAX_TIMEOUT 255 +static int timeout = SBC7240_TIMEOUT; /* in seconds */ +module_param(timeout, int, 0); +MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds. (1<=timeout<=" + __MODULE_STRING(SBC7240_MAX_TIMEOUT) ", default=" + __MODULE_STRING(SBC7240_TIMEOUT) ")"); + +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); +MODULE_PARM_DESC(nowayout, "Disable watchdog when closing device file"); + +#define SBC7240_OPEN_STATUS_BIT 0 +#define SBC7240_ENABLED_STATUS_BIT 1 +#define SBC7240_EXPECT_CLOSE_STATUS_BIT 2 +static unsigned long wdt_status; + +/* + * Utility routines + */ + +static void wdt_disable(void) +{ + /* disable the watchdog */ + if (test_and_clear_bit(SBC7240_ENABLED_STATUS_BIT, &wdt_status)) { + inb_p(SBC7240_DISABLE_PORT); + pr_info("Watchdog timer is now disabled\n"); + } +} + +static void wdt_enable(void) +{ + /* enable the watchdog */ + if (!test_and_set_bit(SBC7240_ENABLED_STATUS_BIT, &wdt_status)) { + inb_p(SBC7240_ENABLE_PORT); + pr_info("Watchdog timer is now enabled\n"); + } +} + +static int wdt_set_timeout(int t) +{ + if (t < 1 || t > SBC7240_MAX_TIMEOUT) { + pr_err("timeout value must be 1<=x<=%d\n", SBC7240_MAX_TIMEOUT); + return -1; + } + /* set the timeout */ + outb_p((unsigned)t, SBC7240_SET_TIMEOUT_PORT); + timeout = t; + pr_info("timeout set to %d seconds\n", t); + return 0; +} + +/* Whack the dog */ +static inline void wdt_keepalive(void) +{ + if (test_bit(SBC7240_ENABLED_STATUS_BIT, &wdt_status)) + inb_p(SBC7240_ENABLE_PORT); +} + +/* + * /dev/watchdog handling + */ +static ssize_t fop_write(struct file *file, const char __user *buf, + size_t count, loff_t *ppos) +{ + size_t i; + char c; + + if (count) { + if (!nowayout) { + clear_bit(SBC7240_EXPECT_CLOSE_STATUS_BIT, + &wdt_status); + + /* is there a magic char ? */ + for (i = 0; i != count; i++) { + if (get_user(c, buf + i)) + return -EFAULT; + if (c == SBC7240_MAGIC_CHAR) { + set_bit(SBC7240_EXPECT_CLOSE_STATUS_BIT, + &wdt_status); + break; + } + } + } + + wdt_keepalive(); + } + + return count; +} + +static int fop_open(struct inode *inode, struct file *file) +{ + if (test_and_set_bit(SBC7240_OPEN_STATUS_BIT, &wdt_status)) + return -EBUSY; + + wdt_enable(); + + return nonseekable_open(inode, file); +} + +static int fop_close(struct inode *inode, struct file *file) +{ + if (test_and_clear_bit(SBC7240_EXPECT_CLOSE_STATUS_BIT, &wdt_status) + || !nowayout) { + wdt_disable(); + } else { + pr_crit("Unexpected close, not stopping watchdog!\n"); + wdt_keepalive(); + } + + clear_bit(SBC7240_OPEN_STATUS_BIT, &wdt_status); + return 0; +} + +static const struct watchdog_info ident = { + .options = WDIOF_KEEPALIVEPING| + WDIOF_SETTIMEOUT| + WDIOF_MAGICCLOSE, + .firmware_version = 1, + .identity = "SBC7240", +}; + + +static long fop_ioctl(struct file *file, unsigned int cmd, unsigned long arg) +{ + switch (cmd) { + case WDIOC_GETSUPPORT: + return copy_to_user((void __user *)arg, &ident, sizeof(ident)) + ? -EFAULT : 0; + case WDIOC_GETSTATUS: + case WDIOC_GETBOOTSTATUS: + return put_user(0, (int __user *)arg); + case WDIOC_SETOPTIONS: + { + int options; + int retval = -EINVAL; + + if (get_user(options, (int __user *)arg)) + return -EFAULT; + + if (options & WDIOS_DISABLECARD) { + wdt_disable(); + retval = 0; + } + + if (options & WDIOS_ENABLECARD) { + wdt_enable(); + retval = 0; + } + + return retval; + } + case WDIOC_KEEPALIVE: + wdt_keepalive(); + return 0; + case WDIOC_SETTIMEOUT: + { + int new_timeout; + + if (get_user(new_timeout, (int __user *)arg)) + return -EFAULT; + + if (wdt_set_timeout(new_timeout)) + return -EINVAL; + + /* Fall through */ + } + case WDIOC_GETTIMEOUT: + return put_user(timeout, (int __user *)arg); + default: + return -ENOTTY; + } +} + +static const struct file_operations wdt_fops = { + .owner = THIS_MODULE, + .llseek = no_llseek, + .write = fop_write, + .open = fop_open, + .release = fop_close, + .unlocked_ioctl = fop_ioctl, +}; + +static struct miscdevice wdt_miscdev = { + .minor = WATCHDOG_MINOR, + .name = "watchdog", + .fops = &wdt_fops, +}; + +/* + * Notifier for system down + */ + +static int wdt_notify_sys(struct notifier_block *this, unsigned long code, + void *unused) +{ + if (code == SYS_DOWN || code == SYS_HALT) + wdt_disable(); + return NOTIFY_DONE; +} + +static struct notifier_block wdt_notifier = { + .notifier_call = wdt_notify_sys, +}; + +static void __exit sbc7240_wdt_unload(void) +{ + pr_info("Removing watchdog\n"); + misc_deregister(&wdt_miscdev); + + unregister_reboot_notifier(&wdt_notifier); + release_region(SBC7240_ENABLE_PORT, 1); +} + +static int __init sbc7240_wdt_init(void) +{ + int rc = -EBUSY; + + if (!request_region(SBC7240_ENABLE_PORT, 1, "SBC7240 WDT")) { + pr_err("I/O address 0x%04x already in use\n", + SBC7240_ENABLE_PORT); + rc = -EIO; + goto err_out; + } + + /* The IO port 0x043 used to disable the watchdog + * is already claimed by the system timer, so we + * can't request_region() it ...*/ + + if (timeout < 1 || timeout > SBC7240_MAX_TIMEOUT) { + timeout = SBC7240_TIMEOUT; + pr_info("timeout value must be 1<=x<=%d, using %d\n", + SBC7240_MAX_TIMEOUT, timeout); + } + wdt_set_timeout(timeout); + wdt_disable(); + + rc = register_reboot_notifier(&wdt_notifier); + if (rc) { + pr_err("cannot register reboot notifier (err=%d)\n", rc); + goto err_out_region; + } + + rc = misc_register(&wdt_miscdev); + if (rc) { + pr_err("cannot register miscdev on minor=%d (err=%d)\n", + wdt_miscdev.minor, rc); + goto err_out_reboot_notifier; + } + + pr_info("Watchdog driver for SBC7240 initialised (nowayout=%d)\n", + nowayout); + + return 0; + +err_out_reboot_notifier: + unregister_reboot_notifier(&wdt_notifier); +err_out_region: + release_region(SBC7240_ENABLE_PORT, 1); +err_out: + return rc; +} + +module_init(sbc7240_wdt_init); +module_exit(sbc7240_wdt_unload); + +MODULE_AUTHOR("Gilles Gigan"); +MODULE_DESCRIPTION("Watchdog device driver for single board" + " computers EPIC Nano 7240 from iEi"); +MODULE_LICENSE("GPL"); diff --git a/drivers/watchdog/sbc8360.c b/drivers/watchdog/sbc8360.c new file mode 100644 index 000000000..da60560ca --- /dev/null +++ b/drivers/watchdog/sbc8360.c @@ -0,0 +1,408 @@ +/* + * SBC8360 Watchdog driver + * + * (c) Copyright 2005 Webcon, Inc. + * + * Based on ib700wdt.c, which is based on advantechwdt.c which is based + * on acquirewdt.c which is based on wdt.c. + * + * (c) Copyright 2001 Charles Howes <chowes@vsol.net> + * + * Based on advantechwdt.c which is based on acquirewdt.c which + * is based on wdt.c. + * + * (c) Copyright 2000-2001 Marek Michalkiewicz <marekm@linux.org.pl> + * + * Based on acquirewdt.c which is based on wdt.c. + * Original copyright messages: + * + * (c) Copyright 1996 Alan Cox <alan@lxorguk.ukuu.org.uk>, + * All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * Neither Alan Cox nor CymruNet Ltd. admit liability nor provide + * warranty for any of this software. This material is provided + * "AS-IS" and at no charge. + * + * (c) Copyright 1995 Alan Cox <alan@lxorguk.ukuu.org.uk> + * + * 14-Dec-2001 Matt Domsch <Matt_Domsch@dell.com> + * Added nowayout module option to override CONFIG_WATCHDOG_NOWAYOUT + * Added timeout module option to override default + * + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/module.h> +#include <linux/types.h> +#include <linux/miscdevice.h> +#include <linux/watchdog.h> +#include <linux/ioport.h> +#include <linux/delay.h> +#include <linux/notifier.h> +#include <linux/fs.h> +#include <linux/reboot.h> +#include <linux/init.h> +#include <linux/spinlock.h> +#include <linux/moduleparam.h> +#include <linux/io.h> +#include <linux/uaccess.h> + + +static unsigned long sbc8360_is_open; +static char expect_close; + +/* + * + * Watchdog Timer Configuration + * + * The function of the watchdog timer is to reset the system automatically + * and is defined at I/O port 0120H and 0121H. To enable the watchdog timer + * and allow the system to reset, write appropriate values from the table + * below to I/O port 0120H and 0121H. To disable the timer, write a zero + * value to I/O port 0121H for the system to stop the watchdog function. + * + * The following describes how the timer should be programmed (according to + * the vendor documentation) + * + * Enabling Watchdog: + * MOV AX,000AH (enable, phase I) + * MOV DX,0120H + * OUT DX,AX + * MOV AX,000BH (enable, phase II) + * MOV DX,0120H + * OUT DX,AX + * MOV AX,000nH (set multiplier n, from 1-4) + * MOV DX,0120H + * OUT DX,AX + * MOV AX,000mH (set base timer m, from 0-F) + * MOV DX,0121H + * OUT DX,AX + * + * Reset timer: + * MOV AX,000mH (same as set base timer, above) + * MOV DX,0121H + * OUT DX,AX + * + * Disabling Watchdog: + * MOV AX,0000H (a zero value) + * MOV DX,0120H + * OUT DX,AX + * + * Watchdog timeout configuration values: + * N + * M | 1 2 3 4 + * --|---------------------------------- + * 0 | 0.5s 5s 50s 100s + * 1 | 1s 10s 100s 200s + * 2 | 1.5s 15s 150s 300s + * 3 | 2s 20s 200s 400s + * 4 | 2.5s 25s 250s 500s + * 5 | 3s 30s 300s 600s + * 6 | 3.5s 35s 350s 700s + * 7 | 4s 40s 400s 800s + * 8 | 4.5s 45s 450s 900s + * 9 | 5s 50s 500s 1000s + * A | 5.5s 55s 550s 1100s + * B | 6s 60s 600s 1200s + * C | 6.5s 65s 650s 1300s + * D | 7s 70s 700s 1400s + * E | 7.5s 75s 750s 1500s + * F | 8s 80s 800s 1600s + * + * Another way to say the same things is: + * For N=1, Timeout = (M+1) * 0.5s + * For N=2, Timeout = (M+1) * 5s + * For N=3, Timeout = (M+1) * 50s + * For N=4, Timeout = (M+1) * 100s + * + */ + +static int wd_times[64][2] = { + {0, 1}, /* 0 = 0.5s */ + {1, 1}, /* 1 = 1s */ + {2, 1}, /* 2 = 1.5s */ + {3, 1}, /* 3 = 2s */ + {4, 1}, /* 4 = 2.5s */ + {5, 1}, /* 5 = 3s */ + {6, 1}, /* 6 = 3.5s */ + {7, 1}, /* 7 = 4s */ + {8, 1}, /* 8 = 4.5s */ + {9, 1}, /* 9 = 5s */ + {0xA, 1}, /* 10 = 5.5s */ + {0xB, 1}, /* 11 = 6s */ + {0xC, 1}, /* 12 = 6.5s */ + {0xD, 1}, /* 13 = 7s */ + {0xE, 1}, /* 14 = 7.5s */ + {0xF, 1}, /* 15 = 8s */ + {0, 2}, /* 16 = 5s */ + {1, 2}, /* 17 = 10s */ + {2, 2}, /* 18 = 15s */ + {3, 2}, /* 19 = 20s */ + {4, 2}, /* 20 = 25s */ + {5, 2}, /* 21 = 30s */ + {6, 2}, /* 22 = 35s */ + {7, 2}, /* 23 = 40s */ + {8, 2}, /* 24 = 45s */ + {9, 2}, /* 25 = 50s */ + {0xA, 2}, /* 26 = 55s */ + {0xB, 2}, /* 27 = 60s */ + {0xC, 2}, /* 28 = 65s */ + {0xD, 2}, /* 29 = 70s */ + {0xE, 2}, /* 30 = 75s */ + {0xF, 2}, /* 31 = 80s */ + {0, 3}, /* 32 = 50s */ + {1, 3}, /* 33 = 100s */ + {2, 3}, /* 34 = 150s */ + {3, 3}, /* 35 = 200s */ + {4, 3}, /* 36 = 250s */ + {5, 3}, /* 37 = 300s */ + {6, 3}, /* 38 = 350s */ + {7, 3}, /* 39 = 400s */ + {8, 3}, /* 40 = 450s */ + {9, 3}, /* 41 = 500s */ + {0xA, 3}, /* 42 = 550s */ + {0xB, 3}, /* 43 = 600s */ + {0xC, 3}, /* 44 = 650s */ + {0xD, 3}, /* 45 = 700s */ + {0xE, 3}, /* 46 = 750s */ + {0xF, 3}, /* 47 = 800s */ + {0, 4}, /* 48 = 100s */ + {1, 4}, /* 49 = 200s */ + {2, 4}, /* 50 = 300s */ + {3, 4}, /* 51 = 400s */ + {4, 4}, /* 52 = 500s */ + {5, 4}, /* 53 = 600s */ + {6, 4}, /* 54 = 700s */ + {7, 4}, /* 55 = 800s */ + {8, 4}, /* 56 = 900s */ + {9, 4}, /* 57 = 1000s */ + {0xA, 4}, /* 58 = 1100s */ + {0xB, 4}, /* 59 = 1200s */ + {0xC, 4}, /* 60 = 1300s */ + {0xD, 4}, /* 61 = 1400s */ + {0xE, 4}, /* 62 = 1500s */ + {0xF, 4} /* 63 = 1600s */ +}; + +#define SBC8360_ENABLE 0x120 +#define SBC8360_BASETIME 0x121 + +static int timeout = 27; +static int wd_margin = 0xB; +static int wd_multiplier = 2; +static bool nowayout = WATCHDOG_NOWAYOUT; + +module_param(timeout, int, 0); +MODULE_PARM_DESC(timeout, "Index into timeout table (0-63) (default=27 (60s))"); +module_param(nowayout, bool, 0); +MODULE_PARM_DESC(nowayout, + "Watchdog cannot be stopped once started (default=" + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); + +/* + * Kernel methods. + */ + +/* Activate and pre-configure watchdog */ +static void sbc8360_activate(void) +{ + /* Enable the watchdog */ + outb(0x0A, SBC8360_ENABLE); + msleep_interruptible(100); + outb(0x0B, SBC8360_ENABLE); + msleep_interruptible(100); + /* Set timeout multiplier */ + outb(wd_multiplier, SBC8360_ENABLE); + msleep_interruptible(100); + /* Nothing happens until first sbc8360_ping() */ +} + +/* Kernel pings watchdog */ +static void sbc8360_ping(void) +{ + /* Write the base timer register */ + outb(wd_margin, SBC8360_BASETIME); +} + +/* stop watchdog */ +static void sbc8360_stop(void) +{ + /* De-activate the watchdog */ + outb(0, SBC8360_ENABLE); +} + +/* Userspace pings kernel driver, or requests clean close */ +static ssize_t sbc8360_write(struct file *file, const char __user *buf, + size_t count, loff_t *ppos) +{ + if (count) { + if (!nowayout) { + size_t i; + + /* In case it was set long ago */ + expect_close = 0; + + for (i = 0; i != count; i++) { + char c; + if (get_user(c, buf + i)) + return -EFAULT; + if (c == 'V') + expect_close = 42; + } + } + sbc8360_ping(); + } + return count; +} + +static int sbc8360_open(struct inode *inode, struct file *file) +{ + if (test_and_set_bit(0, &sbc8360_is_open)) + return -EBUSY; + if (nowayout) + __module_get(THIS_MODULE); + + /* Activate and ping once to start the countdown */ + sbc8360_activate(); + sbc8360_ping(); + return nonseekable_open(inode, file); +} + +static int sbc8360_close(struct inode *inode, struct file *file) +{ + if (expect_close == 42) + sbc8360_stop(); + else + pr_crit("SBC8360 device closed unexpectedly. SBC8360 will not stop!\n"); + + clear_bit(0, &sbc8360_is_open); + expect_close = 0; + return 0; +} + +/* + * Notifier for system down + */ + +static int sbc8360_notify_sys(struct notifier_block *this, unsigned long code, + void *unused) +{ + if (code == SYS_DOWN || code == SYS_HALT) + sbc8360_stop(); /* Disable the SBC8360 Watchdog */ + + return NOTIFY_DONE; +} + +/* + * Kernel Interfaces + */ + +static const struct file_operations sbc8360_fops = { + .owner = THIS_MODULE, + .llseek = no_llseek, + .write = sbc8360_write, + .open = sbc8360_open, + .release = sbc8360_close, +}; + +static struct miscdevice sbc8360_miscdev = { + .minor = WATCHDOG_MINOR, + .name = "watchdog", + .fops = &sbc8360_fops, +}; + +/* + * The SBC8360 needs to learn about soft shutdowns in order to + * turn the timebomb registers off. + */ + +static struct notifier_block sbc8360_notifier = { + .notifier_call = sbc8360_notify_sys, +}; + +static int __init sbc8360_init(void) +{ + int res; + unsigned long int mseconds = 60000; + + if (timeout < 0 || timeout > 63) { + pr_err("Invalid timeout index (must be 0-63)\n"); + res = -EINVAL; + goto out; + } + + if (!request_region(SBC8360_ENABLE, 1, "SBC8360")) { + pr_err("ENABLE method I/O %X is not available\n", + SBC8360_ENABLE); + res = -EIO; + goto out; + } + if (!request_region(SBC8360_BASETIME, 1, "SBC8360")) { + pr_err("BASETIME method I/O %X is not available\n", + SBC8360_BASETIME); + res = -EIO; + goto out_nobasetimereg; + } + + res = register_reboot_notifier(&sbc8360_notifier); + if (res) { + pr_err("Failed to register reboot notifier\n"); + goto out_noreboot; + } + + res = misc_register(&sbc8360_miscdev); + if (res) { + pr_err("failed to register misc device\n"); + goto out_nomisc; + } + + wd_margin = wd_times[timeout][0]; + wd_multiplier = wd_times[timeout][1]; + + if (wd_multiplier == 1) + mseconds = (wd_margin + 1) * 500; + else if (wd_multiplier == 2) + mseconds = (wd_margin + 1) * 5000; + else if (wd_multiplier == 3) + mseconds = (wd_margin + 1) * 50000; + else if (wd_multiplier == 4) + mseconds = (wd_margin + 1) * 100000; + + /* My kingdom for the ability to print "0.5 seconds" in the kernel! */ + pr_info("Timeout set at %ld ms\n", mseconds); + + return 0; + +out_nomisc: + unregister_reboot_notifier(&sbc8360_notifier); +out_noreboot: + release_region(SBC8360_BASETIME, 1); +out_nobasetimereg: + release_region(SBC8360_ENABLE, 1); +out: + return res; +} + +static void __exit sbc8360_exit(void) +{ + misc_deregister(&sbc8360_miscdev); + unregister_reboot_notifier(&sbc8360_notifier); + release_region(SBC8360_ENABLE, 1); + release_region(SBC8360_BASETIME, 1); +} + +module_init(sbc8360_init); +module_exit(sbc8360_exit); + +MODULE_AUTHOR("Ian E. Morgan <imorgan@webcon.ca>"); +MODULE_DESCRIPTION("SBC8360 watchdog driver"); +MODULE_LICENSE("GPL"); +MODULE_VERSION("1.01"); + +/* end of sbc8360.c */ diff --git a/drivers/watchdog/sbc_epx_c3.c b/drivers/watchdog/sbc_epx_c3.c new file mode 100644 index 000000000..a1c502e0d --- /dev/null +++ b/drivers/watchdog/sbc_epx_c3.c @@ -0,0 +1,222 @@ +/* + * SBC EPX C3 0.1 A Hardware Watchdog Device for the Winsystems EPX-C3 + * single board computer + * + * (c) Copyright 2006 Calin A. Culianu <calin@ajvar.org>, All Rights + * Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * based on softdog.c by Alan Cox <alan@lxorguk.ukuu.org.uk> + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/types.h> +#include <linux/kernel.h> +#include <linux/fs.h> +#include <linux/mm.h> +#include <linux/miscdevice.h> +#include <linux/watchdog.h> +#include <linux/notifier.h> +#include <linux/reboot.h> +#include <linux/init.h> +#include <linux/ioport.h> +#include <linux/uaccess.h> +#include <linux/io.h> + +static int epx_c3_alive; + +#define WATCHDOG_TIMEOUT 1 /* 1 sec default timeout */ + +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); +MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); + +#define EPXC3_WATCHDOG_CTL_REG 0x1ee /* write 1 to enable, 0 to disable */ +#define EPXC3_WATCHDOG_PET_REG 0x1ef /* write anything to pet once enabled */ + +static void epx_c3_start(void) +{ + outb(1, EPXC3_WATCHDOG_CTL_REG); +} + +static void epx_c3_stop(void) +{ + + outb(0, EPXC3_WATCHDOG_CTL_REG); + + pr_info("Stopped watchdog timer\n"); +} + +static void epx_c3_pet(void) +{ + outb(1, EPXC3_WATCHDOG_PET_REG); +} + +/* + * Allow only one person to hold it open + */ +static int epx_c3_open(struct inode *inode, struct file *file) +{ + if (epx_c3_alive) + return -EBUSY; + + if (nowayout) + __module_get(THIS_MODULE); + + /* Activate timer */ + epx_c3_start(); + epx_c3_pet(); + + epx_c3_alive = 1; + pr_info("Started watchdog timer\n"); + + return nonseekable_open(inode, file); +} + +static int epx_c3_release(struct inode *inode, struct file *file) +{ + /* Shut off the timer. + * Lock it in if it's a module and we defined ...NOWAYOUT */ + if (!nowayout) + epx_c3_stop(); /* Turn the WDT off */ + + epx_c3_alive = 0; + + return 0; +} + +static ssize_t epx_c3_write(struct file *file, const char __user *data, + size_t len, loff_t *ppos) +{ + /* Refresh the timer. */ + if (len) + epx_c3_pet(); + return len; +} + +static long epx_c3_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) +{ + int options, retval = -EINVAL; + int __user *argp = (void __user *)arg; + static const struct watchdog_info ident = { + .options = WDIOF_KEEPALIVEPING, + .firmware_version = 0, + .identity = "Winsystems EPX-C3 H/W Watchdog", + }; + + switch (cmd) { + case WDIOC_GETSUPPORT: + if (copy_to_user(argp, &ident, sizeof(ident))) + return -EFAULT; + return 0; + case WDIOC_GETSTATUS: + case WDIOC_GETBOOTSTATUS: + return put_user(0, argp); + case WDIOC_SETOPTIONS: + if (get_user(options, argp)) + return -EFAULT; + + if (options & WDIOS_DISABLECARD) { + epx_c3_stop(); + retval = 0; + } + + if (options & WDIOS_ENABLECARD) { + epx_c3_start(); + retval = 0; + } + + return retval; + case WDIOC_KEEPALIVE: + epx_c3_pet(); + return 0; + case WDIOC_GETTIMEOUT: + return put_user(WATCHDOG_TIMEOUT, argp); + default: + return -ENOTTY; + } +} + +static int epx_c3_notify_sys(struct notifier_block *this, unsigned long code, + void *unused) +{ + if (code == SYS_DOWN || code == SYS_HALT) + epx_c3_stop(); /* Turn the WDT off */ + + return NOTIFY_DONE; +} + +static const struct file_operations epx_c3_fops = { + .owner = THIS_MODULE, + .llseek = no_llseek, + .write = epx_c3_write, + .unlocked_ioctl = epx_c3_ioctl, + .open = epx_c3_open, + .release = epx_c3_release, +}; + +static struct miscdevice epx_c3_miscdev = { + .minor = WATCHDOG_MINOR, + .name = "watchdog", + .fops = &epx_c3_fops, +}; + +static struct notifier_block epx_c3_notifier = { + .notifier_call = epx_c3_notify_sys, +}; + +static int __init watchdog_init(void) +{ + int ret; + + if (!request_region(EPXC3_WATCHDOG_CTL_REG, 2, "epxc3_watchdog")) + return -EBUSY; + + ret = register_reboot_notifier(&epx_c3_notifier); + if (ret) { + pr_err("cannot register reboot notifier (err=%d)\n", ret); + goto out; + } + + ret = misc_register(&epx_c3_miscdev); + if (ret) { + pr_err("cannot register miscdev on minor=%d (err=%d)\n", + WATCHDOG_MINOR, ret); + unregister_reboot_notifier(&epx_c3_notifier); + goto out; + } + + pr_info("Hardware Watchdog Timer for Winsystems EPX-C3 SBC: 0.1\n"); + + return 0; + +out: + release_region(EPXC3_WATCHDOG_CTL_REG, 2); + return ret; +} + +static void __exit watchdog_exit(void) +{ + misc_deregister(&epx_c3_miscdev); + unregister_reboot_notifier(&epx_c3_notifier); + release_region(EPXC3_WATCHDOG_CTL_REG, 2); +} + +module_init(watchdog_init); +module_exit(watchdog_exit); + +MODULE_AUTHOR("Calin A. Culianu <calin@ajvar.org>"); +MODULE_DESCRIPTION("Hardware Watchdog Device for Winsystems EPX-C3 SBC. " + "Note that there is no way to probe for this device -- " + "so only use it if you are *sure* you are running on this specific " + "SBC system from Winsystems! It writes to IO ports 0x1ee and 0x1ef!"); +MODULE_LICENSE("GPL"); diff --git a/drivers/watchdog/sbc_fitpc2_wdt.c b/drivers/watchdog/sbc_fitpc2_wdt.c new file mode 100644 index 000000000..a517d8bae --- /dev/null +++ b/drivers/watchdog/sbc_fitpc2_wdt.c @@ -0,0 +1,265 @@ +/* + * Watchdog driver for SBC-FITPC2 board + * + * Author: Denis Turischev <denis@compulab.co.il> + * + * Adapted from the IXP2000 watchdog driver by Deepak Saxena. + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#define pr_fmt(fmt) KBUILD_MODNAME " WATCHDOG: " fmt + +#include <linux/module.h> +#include <linux/types.h> +#include <linux/miscdevice.h> +#include <linux/watchdog.h> +#include <linux/ioport.h> +#include <linux/delay.h> +#include <linux/fs.h> +#include <linux/init.h> +#include <linux/moduleparam.h> +#include <linux/dmi.h> +#include <linux/io.h> +#include <linux/uaccess.h> + + +static bool nowayout = WATCHDOG_NOWAYOUT; +static unsigned int margin = 60; /* (secs) Default is 1 minute */ +static unsigned long wdt_status; +static DEFINE_MUTEX(wdt_lock); + +#define WDT_IN_USE 0 +#define WDT_OK_TO_CLOSE 1 + +#define COMMAND_PORT 0x4c +#define DATA_PORT 0x48 + +#define IFACE_ON_COMMAND 1 +#define REBOOT_COMMAND 2 + +#define WATCHDOG_NAME "SBC-FITPC2 Watchdog" + +static void wdt_send_data(unsigned char command, unsigned char data) +{ + outb(data, DATA_PORT); + msleep(200); + outb(command, COMMAND_PORT); + msleep(100); +} + +static void wdt_enable(void) +{ + mutex_lock(&wdt_lock); + wdt_send_data(IFACE_ON_COMMAND, 1); + wdt_send_data(REBOOT_COMMAND, margin); + mutex_unlock(&wdt_lock); +} + +static void wdt_disable(void) +{ + mutex_lock(&wdt_lock); + wdt_send_data(IFACE_ON_COMMAND, 0); + wdt_send_data(REBOOT_COMMAND, 0); + mutex_unlock(&wdt_lock); +} + +static int fitpc2_wdt_open(struct inode *inode, struct file *file) +{ + if (test_and_set_bit(WDT_IN_USE, &wdt_status)) + return -EBUSY; + + clear_bit(WDT_OK_TO_CLOSE, &wdt_status); + + wdt_enable(); + + return nonseekable_open(inode, file); +} + +static ssize_t fitpc2_wdt_write(struct file *file, const char *data, + size_t len, loff_t *ppos) +{ + size_t i; + + if (!len) + return 0; + + if (nowayout) { + len = 0; + goto out; + } + + clear_bit(WDT_OK_TO_CLOSE, &wdt_status); + + for (i = 0; i != len; i++) { + char c; + + if (get_user(c, data + i)) + return -EFAULT; + + if (c == 'V') + set_bit(WDT_OK_TO_CLOSE, &wdt_status); + } + +out: + wdt_enable(); + + return len; +} + + +static const struct watchdog_info ident = { + .options = WDIOF_MAGICCLOSE | WDIOF_SETTIMEOUT | + WDIOF_KEEPALIVEPING, + .identity = WATCHDOG_NAME, +}; + + +static long fitpc2_wdt_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) +{ + int ret = -ENOTTY; + int time; + + switch (cmd) { + case WDIOC_GETSUPPORT: + ret = copy_to_user((struct watchdog_info *)arg, &ident, + sizeof(ident)) ? -EFAULT : 0; + break; + + case WDIOC_GETSTATUS: + ret = put_user(0, (int *)arg); + break; + + case WDIOC_GETBOOTSTATUS: + ret = put_user(0, (int *)arg); + break; + + case WDIOC_KEEPALIVE: + wdt_enable(); + ret = 0; + break; + + case WDIOC_SETTIMEOUT: + ret = get_user(time, (int *)arg); + if (ret) + break; + + if (time < 31 || time > 255) { + ret = -EINVAL; + break; + } + + margin = time; + wdt_enable(); + /* Fall through */ + + case WDIOC_GETTIMEOUT: + ret = put_user(margin, (int *)arg); + break; + } + + return ret; +} + +static int fitpc2_wdt_release(struct inode *inode, struct file *file) +{ + if (test_bit(WDT_OK_TO_CLOSE, &wdt_status)) { + wdt_disable(); + pr_info("Device disabled\n"); + } else { + pr_warn("Device closed unexpectedly - timer will not stop\n"); + wdt_enable(); + } + + clear_bit(WDT_IN_USE, &wdt_status); + clear_bit(WDT_OK_TO_CLOSE, &wdt_status); + + return 0; +} + + +static const struct file_operations fitpc2_wdt_fops = { + .owner = THIS_MODULE, + .llseek = no_llseek, + .write = fitpc2_wdt_write, + .unlocked_ioctl = fitpc2_wdt_ioctl, + .open = fitpc2_wdt_open, + .release = fitpc2_wdt_release, +}; + +static struct miscdevice fitpc2_wdt_miscdev = { + .minor = WATCHDOG_MINOR, + .name = "watchdog", + .fops = &fitpc2_wdt_fops, +}; + +static int __init fitpc2_wdt_init(void) +{ + int err; + const char *brd_name; + + brd_name = dmi_get_system_info(DMI_BOARD_NAME); + + if (!brd_name || !strstr(brd_name, "SBC-FITPC2")) + return -ENODEV; + + pr_info("%s found\n", brd_name); + + if (!request_region(COMMAND_PORT, 1, WATCHDOG_NAME)) { + pr_err("I/O address 0x%04x already in use\n", COMMAND_PORT); + return -EIO; + } + + if (!request_region(DATA_PORT, 1, WATCHDOG_NAME)) { + pr_err("I/O address 0x%04x already in use\n", DATA_PORT); + err = -EIO; + goto err_data_port; + } + + if (margin < 31 || margin > 255) { + pr_err("margin must be in range 31 - 255 seconds, you tried to set %d\n", + margin); + err = -EINVAL; + goto err_margin; + } + + err = misc_register(&fitpc2_wdt_miscdev); + if (err) { + pr_err("cannot register miscdev on minor=%d (err=%d)\n", + WATCHDOG_MINOR, err); + goto err_margin; + } + + return 0; + +err_margin: + release_region(DATA_PORT, 1); +err_data_port: + release_region(COMMAND_PORT, 1); + + return err; +} + +static void __exit fitpc2_wdt_exit(void) +{ + misc_deregister(&fitpc2_wdt_miscdev); + release_region(DATA_PORT, 1); + release_region(COMMAND_PORT, 1); +} + +module_init(fitpc2_wdt_init); +module_exit(fitpc2_wdt_exit); + +MODULE_AUTHOR("Denis Turischev <denis@compulab.co.il>"); +MODULE_DESCRIPTION("SBC-FITPC2 Watchdog"); + +module_param(margin, int, 0); +MODULE_PARM_DESC(margin, "Watchdog margin in seconds (default 60s)"); + +module_param(nowayout, bool, 0); +MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started"); + +MODULE_LICENSE("GPL"); diff --git a/drivers/watchdog/sbsa_gwdt.c b/drivers/watchdog/sbsa_gwdt.c new file mode 100644 index 000000000..e8bd9887c --- /dev/null +++ b/drivers/watchdog/sbsa_gwdt.c @@ -0,0 +1,401 @@ +/* + * SBSA(Server Base System Architecture) Generic Watchdog driver + * + * Copyright (c) 2015, Linaro Ltd. + * Author: Fu Wei <fu.wei@linaro.org> + * Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com> + * Al Stone <al.stone@linaro.org> + * Timur Tabi <timur@codeaurora.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License 2 as published + * by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * ARM SBSA Generic Watchdog has two stage timeouts: + * the first signal (WS0) is for alerting the system by interrupt, + * the second one (WS1) is a real hardware reset. + * More details about the hardware specification of this device: + * ARM DEN0029B - Server Base System Architecture (SBSA) + * + * This driver can operate ARM SBSA Generic Watchdog as a single stage watchdog + * or a two stages watchdog, it's set up by the module parameter "action". + * In the single stage mode, when the timeout is reached, your system + * will be reset by WS1. The first signal (WS0) is ignored. + * In the two stages mode, when the timeout is reached, the first signal (WS0) + * will trigger panic. If the system is getting into trouble and cannot be reset + * by panic or restart properly by the kdump kernel(if supported), then the + * second stage (as long as the first stage) will be reached, system will be + * reset by WS1. This function can help administrator to backup the system + * context info by panic console output or kdump. + * + * SBSA GWDT: + * if action is 1 (the two stages mode): + * |--------WOR-------WS0--------WOR-------WS1 + * |----timeout-----(panic)----timeout-----reset + * + * if action is 0 (the single stage mode): + * |------WOR-----WS0(ignored)-----WOR------WS1 + * |--------------timeout-------------------reset + * + * Note: Since this watchdog timer has two stages, and each stage is determined + * by WOR, in the single stage mode, the timeout is (WOR * 2); in the two + * stages mode, the timeout is WOR. The maximum timeout in the two stages mode + * is half of that in the single stage mode. + * + */ + +#include <linux/io.h> +#include <linux/io-64-nonatomic-lo-hi.h> +#include <linux/interrupt.h> +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/platform_device.h> +#include <linux/uaccess.h> +#include <linux/watchdog.h> +#include <asm/arch_timer.h> + +#define DRV_NAME "sbsa-gwdt" +#define WATCHDOG_NAME "SBSA Generic Watchdog" + +/* SBSA Generic Watchdog register definitions */ +/* refresh frame */ +#define SBSA_GWDT_WRR 0x000 + +/* control frame */ +#define SBSA_GWDT_WCS 0x000 +#define SBSA_GWDT_WOR 0x008 +#define SBSA_GWDT_WCV 0x010 + +/* refresh/control frame */ +#define SBSA_GWDT_W_IIDR 0xfcc +#define SBSA_GWDT_IDR 0xfd0 + +/* Watchdog Control and Status Register */ +#define SBSA_GWDT_WCS_EN BIT(0) +#define SBSA_GWDT_WCS_WS0 BIT(1) +#define SBSA_GWDT_WCS_WS1 BIT(2) + +/** + * struct sbsa_gwdt - Internal representation of the SBSA GWDT + * @wdd: kernel watchdog_device structure + * @clk: store the System Counter clock frequency, in Hz. + * @refresh_base: Virtual address of the watchdog refresh frame + * @control_base: Virtual address of the watchdog control frame + */ +struct sbsa_gwdt { + struct watchdog_device wdd; + u32 clk; + void __iomem *refresh_base; + void __iomem *control_base; +}; + +#define DEFAULT_TIMEOUT 10 /* seconds */ + +static unsigned int timeout; +module_param(timeout, uint, 0); +MODULE_PARM_DESC(timeout, + "Watchdog timeout in seconds. (>=0, default=" + __MODULE_STRING(DEFAULT_TIMEOUT) ")"); + +/* + * action refers to action taken when watchdog gets WS0 + * 0 = skip + * 1 = panic + * defaults to skip (0) + */ +static int action; +module_param(action, int, 0); +MODULE_PARM_DESC(action, "after watchdog gets WS0 interrupt, do: " + "0 = skip(*) 1 = panic"); + +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, S_IRUGO); +MODULE_PARM_DESC(nowayout, + "Watchdog cannot be stopped once started (default=" + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); + +/* + * watchdog operation functions + */ +static int sbsa_gwdt_set_timeout(struct watchdog_device *wdd, + unsigned int timeout) +{ + struct sbsa_gwdt *gwdt = watchdog_get_drvdata(wdd); + + wdd->timeout = timeout; + + if (action) + writel(gwdt->clk * timeout, + gwdt->control_base + SBSA_GWDT_WOR); + else + /* + * In the single stage mode, The first signal (WS0) is ignored, + * the timeout is (WOR * 2), so the WOR should be configured + * to half value of timeout. + */ + writel(gwdt->clk / 2 * timeout, + gwdt->control_base + SBSA_GWDT_WOR); + + return 0; +} + +static unsigned int sbsa_gwdt_get_timeleft(struct watchdog_device *wdd) +{ + struct sbsa_gwdt *gwdt = watchdog_get_drvdata(wdd); + u64 timeleft = 0; + + /* + * In the single stage mode, if WS0 is deasserted + * (watchdog is in the first stage), + * timeleft = WOR + (WCV - system counter) + */ + if (!action && + !(readl(gwdt->control_base + SBSA_GWDT_WCS) & SBSA_GWDT_WCS_WS0)) + timeleft += readl(gwdt->control_base + SBSA_GWDT_WOR); + + timeleft += lo_hi_readq(gwdt->control_base + SBSA_GWDT_WCV) - + arch_counter_get_cntvct(); + + do_div(timeleft, gwdt->clk); + + return timeleft; +} + +static int sbsa_gwdt_keepalive(struct watchdog_device *wdd) +{ + struct sbsa_gwdt *gwdt = watchdog_get_drvdata(wdd); + + /* + * Writing WRR for an explicit watchdog refresh. + * You can write anyting (like 0). + */ + writel(0, gwdt->refresh_base + SBSA_GWDT_WRR); + + return 0; +} + +static int sbsa_gwdt_start(struct watchdog_device *wdd) +{ + struct sbsa_gwdt *gwdt = watchdog_get_drvdata(wdd); + + /* writing WCS will cause an explicit watchdog refresh */ + writel(SBSA_GWDT_WCS_EN, gwdt->control_base + SBSA_GWDT_WCS); + + return 0; +} + +static int sbsa_gwdt_stop(struct watchdog_device *wdd) +{ + struct sbsa_gwdt *gwdt = watchdog_get_drvdata(wdd); + + /* Simply write 0 to WCS to clean WCS_EN bit */ + writel(0, gwdt->control_base + SBSA_GWDT_WCS); + + return 0; +} + +static irqreturn_t sbsa_gwdt_interrupt(int irq, void *dev_id) +{ + panic(WATCHDOG_NAME " timeout"); + + return IRQ_HANDLED; +} + +static const struct watchdog_info sbsa_gwdt_info = { + .identity = WATCHDOG_NAME, + .options = WDIOF_SETTIMEOUT | + WDIOF_KEEPALIVEPING | + WDIOF_MAGICCLOSE | + WDIOF_CARDRESET, +}; + +static const struct watchdog_ops sbsa_gwdt_ops = { + .owner = THIS_MODULE, + .start = sbsa_gwdt_start, + .stop = sbsa_gwdt_stop, + .ping = sbsa_gwdt_keepalive, + .set_timeout = sbsa_gwdt_set_timeout, + .get_timeleft = sbsa_gwdt_get_timeleft, +}; + +static int sbsa_gwdt_probe(struct platform_device *pdev) +{ + void __iomem *rf_base, *cf_base; + struct device *dev = &pdev->dev; + struct watchdog_device *wdd; + struct sbsa_gwdt *gwdt; + struct resource *res; + int ret, irq; + u32 status; + + gwdt = devm_kzalloc(dev, sizeof(*gwdt), GFP_KERNEL); + if (!gwdt) + return -ENOMEM; + platform_set_drvdata(pdev, gwdt); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + cf_base = devm_ioremap_resource(dev, res); + if (IS_ERR(cf_base)) + return PTR_ERR(cf_base); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 1); + rf_base = devm_ioremap_resource(dev, res); + if (IS_ERR(rf_base)) + return PTR_ERR(rf_base); + + /* + * Get the frequency of system counter from the cp15 interface of ARM + * Generic timer. We don't need to check it, because if it returns "0", + * system would panic in very early stage. + */ + gwdt->clk = arch_timer_get_cntfrq(); + gwdt->refresh_base = rf_base; + gwdt->control_base = cf_base; + + wdd = &gwdt->wdd; + wdd->parent = dev; + wdd->info = &sbsa_gwdt_info; + wdd->ops = &sbsa_gwdt_ops; + wdd->min_timeout = 1; + wdd->max_hw_heartbeat_ms = U32_MAX / gwdt->clk * 1000; + wdd->timeout = DEFAULT_TIMEOUT; + watchdog_set_drvdata(wdd, gwdt); + watchdog_set_nowayout(wdd, nowayout); + + status = readl(cf_base + SBSA_GWDT_WCS); + if (status & SBSA_GWDT_WCS_WS1) { + dev_warn(dev, "System reset by WDT.\n"); + wdd->bootstatus |= WDIOF_CARDRESET; + } + if (status & SBSA_GWDT_WCS_EN) + set_bit(WDOG_HW_RUNNING, &wdd->status); + + if (action) { + irq = platform_get_irq(pdev, 0); + if (irq < 0) { + action = 0; + dev_warn(dev, "unable to get ws0 interrupt.\n"); + } else { + /* + * In case there is a pending ws0 interrupt, just ping + * the watchdog before registering the interrupt routine + */ + writel(0, rf_base + SBSA_GWDT_WRR); + if (devm_request_irq(dev, irq, sbsa_gwdt_interrupt, 0, + pdev->name, gwdt)) { + action = 0; + dev_warn(dev, "unable to request IRQ %d.\n", + irq); + } + } + if (!action) + dev_warn(dev, "falling back to single stage mode.\n"); + } + /* + * In the single stage mode, The first signal (WS0) is ignored, + * the timeout is (WOR * 2), so the maximum timeout should be doubled. + */ + if (!action) + wdd->max_hw_heartbeat_ms *= 2; + + watchdog_init_timeout(wdd, timeout, dev); + /* + * Update timeout to WOR. + * Because of the explicit watchdog refresh mechanism, + * it's also a ping, if watchdog is enabled. + */ + sbsa_gwdt_set_timeout(wdd, wdd->timeout); + + ret = watchdog_register_device(wdd); + if (ret) + return ret; + + dev_info(dev, "Initialized with %ds timeout @ %u Hz, action=%d.%s\n", + wdd->timeout, gwdt->clk, action, + status & SBSA_GWDT_WCS_EN ? " [enabled]" : ""); + + return 0; +} + +static void sbsa_gwdt_shutdown(struct platform_device *pdev) +{ + struct sbsa_gwdt *gwdt = platform_get_drvdata(pdev); + + sbsa_gwdt_stop(&gwdt->wdd); +} + +static int sbsa_gwdt_remove(struct platform_device *pdev) +{ + struct sbsa_gwdt *gwdt = platform_get_drvdata(pdev); + + watchdog_unregister_device(&gwdt->wdd); + + return 0; +} + +/* Disable watchdog if it is active during suspend */ +static int __maybe_unused sbsa_gwdt_suspend(struct device *dev) +{ + struct sbsa_gwdt *gwdt = dev_get_drvdata(dev); + + if (watchdog_active(&gwdt->wdd)) + sbsa_gwdt_stop(&gwdt->wdd); + + return 0; +} + +/* Enable watchdog if necessary */ +static int __maybe_unused sbsa_gwdt_resume(struct device *dev) +{ + struct sbsa_gwdt *gwdt = dev_get_drvdata(dev); + + if (watchdog_active(&gwdt->wdd)) + sbsa_gwdt_start(&gwdt->wdd); + + return 0; +} + +static const struct dev_pm_ops sbsa_gwdt_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(sbsa_gwdt_suspend, sbsa_gwdt_resume) +}; + +static const struct of_device_id sbsa_gwdt_of_match[] = { + { .compatible = "arm,sbsa-gwdt", }, + {}, +}; +MODULE_DEVICE_TABLE(of, sbsa_gwdt_of_match); + +static const struct platform_device_id sbsa_gwdt_pdev_match[] = { + { .name = DRV_NAME, }, + {}, +}; +MODULE_DEVICE_TABLE(platform, sbsa_gwdt_pdev_match); + +static struct platform_driver sbsa_gwdt_driver = { + .driver = { + .name = DRV_NAME, + .pm = &sbsa_gwdt_pm_ops, + .of_match_table = sbsa_gwdt_of_match, + }, + .probe = sbsa_gwdt_probe, + .remove = sbsa_gwdt_remove, + .shutdown = sbsa_gwdt_shutdown, + .id_table = sbsa_gwdt_pdev_match, +}; + +module_platform_driver(sbsa_gwdt_driver); + +MODULE_DESCRIPTION("SBSA Generic Watchdog Driver"); +MODULE_AUTHOR("Fu Wei <fu.wei@linaro.org>"); +MODULE_AUTHOR("Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com>"); +MODULE_AUTHOR("Al Stone <al.stone@linaro.org>"); +MODULE_AUTHOR("Timur Tabi <timur@codeaurora.org>"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:" DRV_NAME); diff --git a/drivers/watchdog/sc1200wdt.c b/drivers/watchdog/sc1200wdt.c new file mode 100644 index 000000000..8e4e2fc13 --- /dev/null +++ b/drivers/watchdog/sc1200wdt.c @@ -0,0 +1,479 @@ +/* + * National Semiconductor PC87307/PC97307 (ala SC1200) WDT driver + * (c) Copyright 2002 Zwane Mwaikambo <zwane@commfireservices.com>, + * All Rights Reserved. + * Based on wdt.c and wdt977.c by Alan Cox and Woody Suwalski respectively. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * The author(s) of this software shall not be held liable for damages + * of any nature resulting due to the use of this software. This + * software is provided AS-IS with no warranties. + * + * Changelog: + * 20020220 Zwane Mwaikambo Code based on datasheet, no hardware. + * 20020221 Zwane Mwaikambo Cleanups as suggested by Jeff Garzik + * and Alan Cox. + * 20020222 Zwane Mwaikambo Added probing. + * 20020225 Zwane Mwaikambo Added ISAPNP support. + * 20020412 Rob Radez Broke out start/stop functions + * <rob@osinvestor.com> Return proper status instead of + * temperature warning + * Add WDIOC_GETBOOTSTATUS and + * WDIOC_SETOPTIONS ioctls + * Fix CONFIG_WATCHDOG_NOWAYOUT + * 20020530 Joel Becker Add Matt Domsch's nowayout module + * option + * 20030116 Adam Belay Updated to the latest pnp code + * + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/miscdevice.h> +#include <linux/watchdog.h> +#include <linux/ioport.h> +#include <linux/spinlock.h> +#include <linux/notifier.h> +#include <linux/reboot.h> +#include <linux/init.h> +#include <linux/pnp.h> +#include <linux/fs.h> +#include <linux/semaphore.h> +#include <linux/io.h> +#include <linux/uaccess.h> + +#define SC1200_MODULE_VER "build 20020303" +#define SC1200_MODULE_NAME "sc1200wdt" + +#define MAX_TIMEOUT 255 /* 255 minutes */ +#define PMIR (io) /* Power Management Index Register */ +#define PMDR (io+1) /* Power Management Data Register */ + +/* Data Register indexes */ +#define FER1 0x00 /* Function enable register 1 */ +#define FER2 0x01 /* Function enable register 2 */ +#define PMC1 0x02 /* Power Management Ctrl 1 */ +#define PMC2 0x03 /* Power Management Ctrl 2 */ +#define PMC3 0x04 /* Power Management Ctrl 3 */ +#define WDTO 0x05 /* Watchdog timeout register */ +#define WDCF 0x06 /* Watchdog config register */ +#define WDST 0x07 /* Watchdog status register */ + +/* WDCF bitfields - which devices assert WDO */ +#define KBC_IRQ 0x01 /* Keyboard Controller */ +#define MSE_IRQ 0x02 /* Mouse */ +#define UART1_IRQ 0x03 /* Serial0 */ +#define UART2_IRQ 0x04 /* Serial1 */ +/* 5 -7 are reserved */ + +static int timeout = 1; +static int io = -1; +static int io_len = 2; /* for non plug and play */ +static unsigned long open_flag; +static char expect_close; +static DEFINE_SPINLOCK(sc1200wdt_lock); /* io port access serialisation */ + +#if defined CONFIG_PNP +static int isapnp = 1; +static struct pnp_dev *wdt_dev; + +module_param(isapnp, int, 0); +MODULE_PARM_DESC(isapnp, + "When set to 0 driver ISA PnP support will be disabled"); +#endif + +module_param_hw(io, int, ioport, 0); +MODULE_PARM_DESC(io, "io port"); +module_param(timeout, int, 0); +MODULE_PARM_DESC(timeout, "range is 0-255 minutes, default is 1"); + +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); +MODULE_PARM_DESC(nowayout, + "Watchdog cannot be stopped once started (default=" + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); + + + +/* Read from Data Register */ +static inline void __sc1200wdt_read_data(unsigned char index, + unsigned char *data) +{ + outb_p(index, PMIR); + *data = inb(PMDR); +} + +static void sc1200wdt_read_data(unsigned char index, unsigned char *data) +{ + spin_lock(&sc1200wdt_lock); + __sc1200wdt_read_data(index, data); + spin_unlock(&sc1200wdt_lock); +} + +/* Write to Data Register */ +static inline void __sc1200wdt_write_data(unsigned char index, + unsigned char data) +{ + outb_p(index, PMIR); + outb(data, PMDR); +} + +static inline void sc1200wdt_write_data(unsigned char index, + unsigned char data) +{ + spin_lock(&sc1200wdt_lock); + __sc1200wdt_write_data(index, data); + spin_unlock(&sc1200wdt_lock); +} + + +static void sc1200wdt_start(void) +{ + unsigned char reg; + spin_lock(&sc1200wdt_lock); + + __sc1200wdt_read_data(WDCF, ®); + /* assert WDO when any of the following interrupts are triggered too */ + reg |= (KBC_IRQ | MSE_IRQ | UART1_IRQ | UART2_IRQ); + __sc1200wdt_write_data(WDCF, reg); + /* set the timeout and get the ball rolling */ + __sc1200wdt_write_data(WDTO, timeout); + + spin_unlock(&sc1200wdt_lock); +} + +static void sc1200wdt_stop(void) +{ + sc1200wdt_write_data(WDTO, 0); +} + +/* This returns the status of the WDO signal, inactive high. */ +static inline int sc1200wdt_status(void) +{ + unsigned char ret; + + sc1200wdt_read_data(WDST, &ret); + /* If the bit is inactive, the watchdog is enabled, so return + * KEEPALIVEPING which is a bit of a kludge because there's nothing + * else for enabled/disabled status + */ + return (ret & 0x01) ? 0 : WDIOF_KEEPALIVEPING; +} + +static int sc1200wdt_open(struct inode *inode, struct file *file) +{ + /* allow one at a time */ + if (test_and_set_bit(0, &open_flag)) + return -EBUSY; + + if (timeout > MAX_TIMEOUT) + timeout = MAX_TIMEOUT; + + sc1200wdt_start(); + pr_info("Watchdog enabled, timeout = %d min(s)", timeout); + + return nonseekable_open(inode, file); +} + + +static long sc1200wdt_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) +{ + int new_timeout; + void __user *argp = (void __user *)arg; + int __user *p = argp; + static const struct watchdog_info ident = { + .options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT | + WDIOF_MAGICCLOSE, + .firmware_version = 0, + .identity = "PC87307/PC97307", + }; + + switch (cmd) { + case WDIOC_GETSUPPORT: + if (copy_to_user(argp, &ident, sizeof(ident))) + return -EFAULT; + return 0; + + case WDIOC_GETSTATUS: + return put_user(sc1200wdt_status(), p); + + case WDIOC_GETBOOTSTATUS: + return put_user(0, p); + + case WDIOC_SETOPTIONS: + { + int options, retval = -EINVAL; + + if (get_user(options, p)) + return -EFAULT; + + if (options & WDIOS_DISABLECARD) { + sc1200wdt_stop(); + retval = 0; + } + + if (options & WDIOS_ENABLECARD) { + sc1200wdt_start(); + retval = 0; + } + + return retval; + } + case WDIOC_KEEPALIVE: + sc1200wdt_write_data(WDTO, timeout); + return 0; + + case WDIOC_SETTIMEOUT: + if (get_user(new_timeout, p)) + return -EFAULT; + /* the API states this is given in secs */ + new_timeout /= 60; + if (new_timeout < 0 || new_timeout > MAX_TIMEOUT) + return -EINVAL; + timeout = new_timeout; + sc1200wdt_write_data(WDTO, timeout); + /* fall through and return the new timeout */ + + case WDIOC_GETTIMEOUT: + return put_user(timeout * 60, p); + + default: + return -ENOTTY; + } +} + + +static int sc1200wdt_release(struct inode *inode, struct file *file) +{ + if (expect_close == 42) { + sc1200wdt_stop(); + pr_info("Watchdog disabled\n"); + } else { + sc1200wdt_write_data(WDTO, timeout); + pr_crit("Unexpected close!, timeout = %d min(s)\n", timeout); + } + clear_bit(0, &open_flag); + expect_close = 0; + + return 0; +} + + +static ssize_t sc1200wdt_write(struct file *file, const char __user *data, + size_t len, loff_t *ppos) +{ + if (len) { + if (!nowayout) { + size_t i; + + expect_close = 0; + + for (i = 0; i != len; i++) { + char c; + + if (get_user(c, data + i)) + return -EFAULT; + if (c == 'V') + expect_close = 42; + } + } + + sc1200wdt_write_data(WDTO, timeout); + return len; + } + + return 0; +} + + +static int sc1200wdt_notify_sys(struct notifier_block *this, + unsigned long code, void *unused) +{ + if (code == SYS_DOWN || code == SYS_HALT) + sc1200wdt_stop(); + + return NOTIFY_DONE; +} + + +static struct notifier_block sc1200wdt_notifier = { + .notifier_call = sc1200wdt_notify_sys, +}; + +static const struct file_operations sc1200wdt_fops = { + .owner = THIS_MODULE, + .llseek = no_llseek, + .write = sc1200wdt_write, + .unlocked_ioctl = sc1200wdt_ioctl, + .open = sc1200wdt_open, + .release = sc1200wdt_release, +}; + +static struct miscdevice sc1200wdt_miscdev = { + .minor = WATCHDOG_MINOR, + .name = "watchdog", + .fops = &sc1200wdt_fops, +}; + + +static int __init sc1200wdt_probe(void) +{ + /* The probe works by reading the PMC3 register's default value of 0x0e + * there is one caveat, if the device disables the parallel port or any + * of the UARTs we won't be able to detect it. + * NB. This could be done with accuracy by reading the SID registers, + * but we don't have access to those io regions. + */ + + unsigned char reg; + + sc1200wdt_read_data(PMC3, ®); + reg &= 0x0f; /* we don't want the UART busy bits */ + return (reg == 0x0e) ? 0 : -ENODEV; +} + + +#if defined CONFIG_PNP + +static const struct pnp_device_id scl200wdt_pnp_devices[] = { + /* National Semiconductor PC87307/PC97307 watchdog component */ + {.id = "NSC0800", .driver_data = 0}, + {.id = ""}, +}; + +static int scl200wdt_pnp_probe(struct pnp_dev *dev, + const struct pnp_device_id *dev_id) +{ + /* this driver only supports one card at a time */ + if (wdt_dev || !isapnp) + return -EBUSY; + + wdt_dev = dev; + io = pnp_port_start(wdt_dev, 0); + io_len = pnp_port_len(wdt_dev, 0); + + if (!request_region(io, io_len, SC1200_MODULE_NAME)) { + pr_err("Unable to register IO port %#x\n", io); + return -EBUSY; + } + + pr_info("PnP device found at io port %#x/%d\n", io, io_len); + return 0; +} + +static void scl200wdt_pnp_remove(struct pnp_dev *dev) +{ + if (wdt_dev) { + release_region(io, io_len); + wdt_dev = NULL; + } +} + +static struct pnp_driver scl200wdt_pnp_driver = { + .name = "scl200wdt", + .id_table = scl200wdt_pnp_devices, + .probe = scl200wdt_pnp_probe, + .remove = scl200wdt_pnp_remove, +}; + +#endif /* CONFIG_PNP */ + + +static int __init sc1200wdt_init(void) +{ + int ret; + + pr_info("%s\n", SC1200_MODULE_VER); + +#if defined CONFIG_PNP + if (isapnp) { + ret = pnp_register_driver(&scl200wdt_pnp_driver); + if (ret) + goto out_clean; + } +#endif + + if (io == -1) { + pr_err("io parameter must be specified\n"); + ret = -EINVAL; + goto out_pnp; + } + +#if defined CONFIG_PNP + /* now that the user has specified an IO port and we haven't detected + * any devices, disable pnp support */ + if (isapnp) + pnp_unregister_driver(&scl200wdt_pnp_driver); + isapnp = 0; +#endif + + if (!request_region(io, io_len, SC1200_MODULE_NAME)) { + pr_err("Unable to register IO port %#x\n", io); + ret = -EBUSY; + goto out_pnp; + } + + ret = sc1200wdt_probe(); + if (ret) + goto out_io; + + ret = register_reboot_notifier(&sc1200wdt_notifier); + if (ret) { + pr_err("Unable to register reboot notifier err = %d\n", ret); + goto out_io; + } + + ret = misc_register(&sc1200wdt_miscdev); + if (ret) { + pr_err("Unable to register miscdev on minor %d\n", + WATCHDOG_MINOR); + goto out_rbt; + } + + /* ret = 0 */ + +out_clean: + return ret; + +out_rbt: + unregister_reboot_notifier(&sc1200wdt_notifier); + +out_io: + release_region(io, io_len); + +out_pnp: +#if defined CONFIG_PNP + if (isapnp) + pnp_unregister_driver(&scl200wdt_pnp_driver); +#endif + goto out_clean; +} + + +static void __exit sc1200wdt_exit(void) +{ + misc_deregister(&sc1200wdt_miscdev); + unregister_reboot_notifier(&sc1200wdt_notifier); + +#if defined CONFIG_PNP + if (isapnp) + pnp_unregister_driver(&scl200wdt_pnp_driver); + else +#endif + release_region(io, io_len); +} + +module_init(sc1200wdt_init); +module_exit(sc1200wdt_exit); + +MODULE_AUTHOR("Zwane Mwaikambo <zwane@commfireservices.com>"); +MODULE_DESCRIPTION( + "Driver for National Semiconductor PC87307/PC97307 watchdog component"); +MODULE_LICENSE("GPL"); diff --git a/drivers/watchdog/sc520_wdt.c b/drivers/watchdog/sc520_wdt.c new file mode 100644 index 000000000..809ebcaef --- /dev/null +++ b/drivers/watchdog/sc520_wdt.c @@ -0,0 +1,434 @@ +/* + * AMD Elan SC520 processor Watchdog Timer driver + * + * Based on acquirewdt.c by Alan Cox, + * and sbc60xxwdt.c by Jakob Oestergaard <jakob@unthought.net> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * The authors do NOT admit liability nor provide warranty for + * any of this software. This material is provided "AS-IS" in + * the hope that it may be useful for others. + * + * (c) Copyright 2001 Scott Jennings <linuxdrivers@oro.net> + * 9/27 - 2001 [Initial release] + * + * Additional fixes Alan Cox + * - Fixed formatting + * - Removed debug printks + * - Fixed SMP built kernel deadlock + * - Switched to private locks not lock_kernel + * - Used ioremap/writew/readw + * - Added NOWAYOUT support + * 4/12 - 2002 Changes by Rob Radez <rob@osinvestor.com> + * - Change comments + * - Eliminate fop_llseek + * - Change CONFIG_WATCHDOG_NOWAYOUT semantics + * - Add KERN_* tags to printks + * - fix possible wdt_is_open race + * - Report proper capabilities in watchdog_info + * - Add WDIOC_{GETSTATUS, GETBOOTSTATUS, SETTIMEOUT, + * GETTIMEOUT, SETOPTIONS} ioctls + * 09/8 - 2003 Changes by Wim Van Sebroeck <wim@iguana.be> + * - cleanup of trailing spaces + * - added extra printk's for startup problems + * - use module_param + * - made timeout (the emulated heartbeat) a module_param + * - made the keepalive ping an internal subroutine + * 3/27 - 2004 Changes by Sean Young <sean@mess.org> + * - set MMCR_BASE to 0xfffef000 + * - CBAR does not need to be read + * - removed debugging printks + * + * This WDT driver is different from most other Linux WDT + * drivers in that the driver will ping the watchdog by itself, + * because this particular WDT has a very short timeout (1.6 + * seconds) and it would be insane to count on any userspace + * daemon always getting scheduled within that time frame. + * + * This driver uses memory mapped IO, and spinlock. + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/types.h> +#include <linux/timer.h> +#include <linux/miscdevice.h> +#include <linux/watchdog.h> +#include <linux/fs.h> +#include <linux/ioport.h> +#include <linux/notifier.h> +#include <linux/reboot.h> +#include <linux/init.h> +#include <linux/jiffies.h> +#include <linux/io.h> +#include <linux/uaccess.h> + + +/* + * The AMD Elan SC520 timeout value is 492us times a power of 2 (0-7) + * + * 0: 492us 2: 1.01s 4: 4.03s 6: 16.22s + * 1: 503ms 3: 2.01s 5: 8.05s 7: 32.21s + * + * We will program the SC520 watchdog for a timeout of 2.01s. + * If we reset the watchdog every ~250ms we should be safe. + */ + +#define WDT_INTERVAL (HZ/4+1) + +/* + * We must not require too good response from the userspace daemon. + * Here we require the userspace daemon to send us a heartbeat + * char to /dev/watchdog every 30 seconds. + */ + +#define WATCHDOG_TIMEOUT 30 /* 30 sec default timeout */ +/* in seconds, will be multiplied by HZ to get seconds to wait for a ping */ +static int timeout = WATCHDOG_TIMEOUT; +module_param(timeout, int, 0); +MODULE_PARM_DESC(timeout, + "Watchdog timeout in seconds. (1 <= timeout <= 3600, default=" + __MODULE_STRING(WATCHDOG_TIMEOUT) ")"); + +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); +MODULE_PARM_DESC(nowayout, + "Watchdog cannot be stopped once started (default=" + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); + +/* + * AMD Elan SC520 - Watchdog Timer Registers + */ +#define MMCR_BASE 0xfffef000 /* The default base address */ +#define OFFS_WDTMRCTL 0xCB0 /* Watchdog Timer Control Register */ + +/* WDT Control Register bit definitions */ +#define WDT_EXP_SEL_01 0x0001 /* [01] Time-out = 496 us (with 33 Mhz clk). */ +#define WDT_EXP_SEL_02 0x0002 /* [02] Time-out = 508 ms (with 33 Mhz clk). */ +#define WDT_EXP_SEL_03 0x0004 /* [03] Time-out = 1.02 s (with 33 Mhz clk). */ +#define WDT_EXP_SEL_04 0x0008 /* [04] Time-out = 2.03 s (with 33 Mhz clk). */ +#define WDT_EXP_SEL_05 0x0010 /* [05] Time-out = 4.07 s (with 33 Mhz clk). */ +#define WDT_EXP_SEL_06 0x0020 /* [06] Time-out = 8.13 s (with 33 Mhz clk). */ +#define WDT_EXP_SEL_07 0x0040 /* [07] Time-out = 16.27s (with 33 Mhz clk). */ +#define WDT_EXP_SEL_08 0x0080 /* [08] Time-out = 32.54s (with 33 Mhz clk). */ +#define WDT_IRQ_FLG 0x1000 /* [12] Interrupt Request Flag */ +#define WDT_WRST_ENB 0x4000 /* [14] Watchdog Timer Reset Enable */ +#define WDT_ENB 0x8000 /* [15] Watchdog Timer Enable */ + +static __u16 __iomem *wdtmrctl; + +static void wdt_timer_ping(struct timer_list *); +static DEFINE_TIMER(timer, wdt_timer_ping); +static unsigned long next_heartbeat; +static unsigned long wdt_is_open; +static char wdt_expect_close; +static DEFINE_SPINLOCK(wdt_spinlock); + +/* + * Whack the dog + */ + +static void wdt_timer_ping(struct timer_list *unused) +{ + /* If we got a heartbeat pulse within the WDT_US_INTERVAL + * we agree to ping the WDT + */ + if (time_before(jiffies, next_heartbeat)) { + /* Ping the WDT */ + spin_lock(&wdt_spinlock); + writew(0xAAAA, wdtmrctl); + writew(0x5555, wdtmrctl); + spin_unlock(&wdt_spinlock); + + /* Re-set the timer interval */ + mod_timer(&timer, jiffies + WDT_INTERVAL); + } else + pr_warn("Heartbeat lost! Will not ping the watchdog\n"); +} + +/* + * Utility routines + */ + +static void wdt_config(int writeval) +{ + unsigned long flags; + + /* buy some time (ping) */ + spin_lock_irqsave(&wdt_spinlock, flags); + readw(wdtmrctl); /* ensure write synchronization */ + writew(0xAAAA, wdtmrctl); + writew(0x5555, wdtmrctl); + /* unlock WDT = make WDT configuration register writable one time */ + writew(0x3333, wdtmrctl); + writew(0xCCCC, wdtmrctl); + /* write WDT configuration register */ + writew(writeval, wdtmrctl); + spin_unlock_irqrestore(&wdt_spinlock, flags); +} + +static int wdt_startup(void) +{ + next_heartbeat = jiffies + (timeout * HZ); + + /* Start the timer */ + mod_timer(&timer, jiffies + WDT_INTERVAL); + + /* Start the watchdog */ + wdt_config(WDT_ENB | WDT_WRST_ENB | WDT_EXP_SEL_04); + + pr_info("Watchdog timer is now enabled\n"); + return 0; +} + +static int wdt_turnoff(void) +{ + /* Stop the timer */ + del_timer_sync(&timer); + + /* Stop the watchdog */ + wdt_config(0); + + pr_info("Watchdog timer is now disabled...\n"); + return 0; +} + +static int wdt_keepalive(void) +{ + /* user land ping */ + next_heartbeat = jiffies + (timeout * HZ); + return 0; +} + +static int wdt_set_heartbeat(int t) +{ + if ((t < 1) || (t > 3600)) /* arbitrary upper limit */ + return -EINVAL; + + timeout = t; + return 0; +} + +/* + * /dev/watchdog handling + */ + +static ssize_t fop_write(struct file *file, const char __user *buf, + size_t count, loff_t *ppos) +{ + /* See if we got the magic character 'V' and reload the timer */ + if (count) { + if (!nowayout) { + size_t ofs; + + /* note: just in case someone wrote the magic character + * five months ago... */ + wdt_expect_close = 0; + + /* now scan */ + for (ofs = 0; ofs != count; ofs++) { + char c; + if (get_user(c, buf + ofs)) + return -EFAULT; + if (c == 'V') + wdt_expect_close = 42; + } + } + + /* Well, anyhow someone wrote to us, we should + return that favour */ + wdt_keepalive(); + } + return count; +} + +static int fop_open(struct inode *inode, struct file *file) +{ + /* Just in case we're already talking to someone... */ + if (test_and_set_bit(0, &wdt_is_open)) + return -EBUSY; + if (nowayout) + __module_get(THIS_MODULE); + + /* Good, fire up the show */ + wdt_startup(); + return nonseekable_open(inode, file); +} + +static int fop_close(struct inode *inode, struct file *file) +{ + if (wdt_expect_close == 42) + wdt_turnoff(); + else { + pr_crit("Unexpected close, not stopping watchdog!\n"); + wdt_keepalive(); + } + clear_bit(0, &wdt_is_open); + wdt_expect_close = 0; + return 0; +} + +static long fop_ioctl(struct file *file, unsigned int cmd, unsigned long arg) +{ + void __user *argp = (void __user *)arg; + int __user *p = argp; + static const struct watchdog_info ident = { + .options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT + | WDIOF_MAGICCLOSE, + .firmware_version = 1, + .identity = "SC520", + }; + + switch (cmd) { + case WDIOC_GETSUPPORT: + return copy_to_user(argp, &ident, sizeof(ident)) ? -EFAULT : 0; + case WDIOC_GETSTATUS: + case WDIOC_GETBOOTSTATUS: + return put_user(0, p); + case WDIOC_SETOPTIONS: + { + int new_options, retval = -EINVAL; + + if (get_user(new_options, p)) + return -EFAULT; + + if (new_options & WDIOS_DISABLECARD) { + wdt_turnoff(); + retval = 0; + } + + if (new_options & WDIOS_ENABLECARD) { + wdt_startup(); + retval = 0; + } + + return retval; + } + case WDIOC_KEEPALIVE: + wdt_keepalive(); + return 0; + case WDIOC_SETTIMEOUT: + { + int new_timeout; + + if (get_user(new_timeout, p)) + return -EFAULT; + + if (wdt_set_heartbeat(new_timeout)) + return -EINVAL; + + wdt_keepalive(); + /* Fall through */ + } + case WDIOC_GETTIMEOUT: + return put_user(timeout, p); + default: + return -ENOTTY; + } +} + +static const struct file_operations wdt_fops = { + .owner = THIS_MODULE, + .llseek = no_llseek, + .write = fop_write, + .open = fop_open, + .release = fop_close, + .unlocked_ioctl = fop_ioctl, +}; + +static struct miscdevice wdt_miscdev = { + .minor = WATCHDOG_MINOR, + .name = "watchdog", + .fops = &wdt_fops, +}; + +/* + * Notifier for system down + */ + +static int wdt_notify_sys(struct notifier_block *this, unsigned long code, + void *unused) +{ + if (code == SYS_DOWN || code == SYS_HALT) + wdt_turnoff(); + return NOTIFY_DONE; +} + +/* + * The WDT needs to learn about soft shutdowns in order to + * turn the timebomb registers off. + */ + +static struct notifier_block wdt_notifier = { + .notifier_call = wdt_notify_sys, +}; + +static void __exit sc520_wdt_unload(void) +{ + if (!nowayout) + wdt_turnoff(); + + /* Deregister */ + misc_deregister(&wdt_miscdev); + unregister_reboot_notifier(&wdt_notifier); + iounmap(wdtmrctl); +} + +static int __init sc520_wdt_init(void) +{ + int rc = -EBUSY; + + /* Check that the timeout value is within it's range ; + if not reset to the default */ + if (wdt_set_heartbeat(timeout)) { + wdt_set_heartbeat(WATCHDOG_TIMEOUT); + pr_info("timeout value must be 1 <= timeout <= 3600, using %d\n", + WATCHDOG_TIMEOUT); + } + + wdtmrctl = ioremap(MMCR_BASE + OFFS_WDTMRCTL, 2); + if (!wdtmrctl) { + pr_err("Unable to remap memory\n"); + rc = -ENOMEM; + goto err_out_region2; + } + + rc = register_reboot_notifier(&wdt_notifier); + if (rc) { + pr_err("cannot register reboot notifier (err=%d)\n", rc); + goto err_out_ioremap; + } + + rc = misc_register(&wdt_miscdev); + if (rc) { + pr_err("cannot register miscdev on minor=%d (err=%d)\n", + WATCHDOG_MINOR, rc); + goto err_out_notifier; + } + + pr_info("WDT driver for SC520 initialised. timeout=%d sec (nowayout=%d)\n", + timeout, nowayout); + + return 0; + +err_out_notifier: + unregister_reboot_notifier(&wdt_notifier); +err_out_ioremap: + iounmap(wdtmrctl); +err_out_region2: + return rc; +} + +module_init(sc520_wdt_init); +module_exit(sc520_wdt_unload); + +MODULE_AUTHOR("Scott and Bill Jennings"); +MODULE_DESCRIPTION( + "Driver for watchdog timer in AMD \"Elan\" SC520 uProcessor"); +MODULE_LICENSE("GPL"); diff --git a/drivers/watchdog/sch311x_wdt.c b/drivers/watchdog/sch311x_wdt.c new file mode 100644 index 000000000..814cdf539 --- /dev/null +++ b/drivers/watchdog/sch311x_wdt.c @@ -0,0 +1,545 @@ +/* + * sch311x_wdt.c - Driver for the SCH311x Super-I/O chips + * integrated watchdog. + * + * (c) Copyright 2008 Wim Van Sebroeck <wim@iguana.be>. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * Neither Wim Van Sebroeck nor Iguana vzw. admit liability nor + * provide warranty for any of this software. This material is + * provided "AS-IS" and at no charge. + */ + +/* + * Includes, defines, variables, module parameters, ... + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +/* Includes */ +#include <linux/module.h> /* For module specific items */ +#include <linux/moduleparam.h> /* For new moduleparam's */ +#include <linux/types.h> /* For standard types (like size_t) */ +#include <linux/errno.h> /* For the -ENODEV/... values */ +#include <linux/kernel.h> /* For printk/... */ +#include <linux/miscdevice.h> /* For struct miscdevice */ +#include <linux/watchdog.h> /* For the watchdog specific items */ +#include <linux/init.h> /* For __init/__exit/... */ +#include <linux/fs.h> /* For file operations */ +#include <linux/platform_device.h> /* For platform_driver framework */ +#include <linux/ioport.h> /* For io-port access */ +#include <linux/spinlock.h> /* For spin_lock/spin_unlock/... */ +#include <linux/uaccess.h> /* For copy_to_user/put_user/... */ +#include <linux/io.h> /* For inb/outb/... */ + +/* Module and version information */ +#define DRV_NAME "sch311x_wdt" + +/* Runtime registers */ +#define GP60 0x47 +#define WDT_TIME_OUT 0x65 +#define WDT_VAL 0x66 +#define WDT_CFG 0x67 +#define WDT_CTRL 0x68 + +/* internal variables */ +static unsigned long sch311x_wdt_is_open; +static char sch311x_wdt_expect_close; +static struct platform_device *sch311x_wdt_pdev; + +static int sch311x_ioports[] = { 0x2e, 0x4e, 0x162e, 0x164e, 0x00 }; + +static struct { /* The devices private data */ + /* the Runtime Register base address */ + unsigned short runtime_reg; + /* The card's boot status */ + int boot_status; + /* the lock for io operations */ + spinlock_t io_lock; +} sch311x_wdt_data; + +/* Module load parameters */ +static unsigned short force_id; +module_param(force_id, ushort, 0); +MODULE_PARM_DESC(force_id, "Override the detected device ID"); + +#define WATCHDOG_TIMEOUT 60 /* 60 sec default timeout */ +static int timeout = WATCHDOG_TIMEOUT; /* in seconds */ +module_param(timeout, int, 0); +MODULE_PARM_DESC(timeout, + "Watchdog timeout in seconds. 1<= timeout <=15300, default=" + __MODULE_STRING(WATCHDOG_TIMEOUT) "."); + +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); +MODULE_PARM_DESC(nowayout, + "Watchdog cannot be stopped once started (default=" + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); + +/* + * Super-IO functions + */ + +static inline void sch311x_sio_enter(int sio_config_port) +{ + outb(0x55, sio_config_port); +} + +static inline void sch311x_sio_exit(int sio_config_port) +{ + outb(0xaa, sio_config_port); +} + +static inline int sch311x_sio_inb(int sio_config_port, int reg) +{ + outb(reg, sio_config_port); + return inb(sio_config_port + 1); +} + +static inline void sch311x_sio_outb(int sio_config_port, int reg, int val) +{ + outb(reg, sio_config_port); + outb(val, sio_config_port + 1); +} + +/* + * Watchdog Operations + */ + +static void sch311x_wdt_set_timeout(int t) +{ + unsigned char timeout_unit = 0x80; + + /* When new timeout is bigger then 255 seconds, we will use minutes */ + if (t > 255) { + timeout_unit = 0; + t /= 60; + } + + /* -- Watchdog Timeout -- + * Bit 0-6 (Reserved) + * Bit 7 WDT Time-out Value Units Select + * (0 = Minutes, 1 = Seconds) + */ + outb(timeout_unit, sch311x_wdt_data.runtime_reg + WDT_TIME_OUT); + + /* -- Watchdog Timer Time-out Value -- + * Bit 0-7 Binary coded units (0=Disabled, 1..255) + */ + outb(t, sch311x_wdt_data.runtime_reg + WDT_VAL); +} + +static void sch311x_wdt_start(void) +{ + unsigned char t; + + spin_lock(&sch311x_wdt_data.io_lock); + + /* set watchdog's timeout */ + sch311x_wdt_set_timeout(timeout); + /* enable the watchdog */ + /* -- General Purpose I/O Bit 6.0 -- + * Bit 0, In/Out: 0 = Output, 1 = Input + * Bit 1, Polarity: 0 = No Invert, 1 = Invert + * Bit 2-3, Function select: 00 = GPI/O, 01 = LED1, 11 = WDT, + * 10 = Either Edge Triggered Intr.4 + * Bit 4-6 (Reserved) + * Bit 7, Output Type: 0 = Push Pull Bit, 1 = Open Drain + */ + t = inb(sch311x_wdt_data.runtime_reg + GP60); + outb((t & ~0x0d) | 0x0c, sch311x_wdt_data.runtime_reg + GP60); + + spin_unlock(&sch311x_wdt_data.io_lock); + +} + +static void sch311x_wdt_stop(void) +{ + unsigned char t; + + spin_lock(&sch311x_wdt_data.io_lock); + + /* stop the watchdog */ + t = inb(sch311x_wdt_data.runtime_reg + GP60); + outb((t & ~0x0d) | 0x01, sch311x_wdt_data.runtime_reg + GP60); + /* disable timeout by setting it to 0 */ + sch311x_wdt_set_timeout(0); + + spin_unlock(&sch311x_wdt_data.io_lock); +} + +static void sch311x_wdt_keepalive(void) +{ + spin_lock(&sch311x_wdt_data.io_lock); + sch311x_wdt_set_timeout(timeout); + spin_unlock(&sch311x_wdt_data.io_lock); +} + +static int sch311x_wdt_set_heartbeat(int t) +{ + if (t < 1 || t > (255*60)) + return -EINVAL; + + /* When new timeout is bigger then 255 seconds, + * we will round up to minutes (with a max of 255) */ + if (t > 255) + t = (((t - 1) / 60) + 1) * 60; + + timeout = t; + return 0; +} + +static void sch311x_wdt_get_status(int *status) +{ + unsigned char new_status; + + *status = 0; + + spin_lock(&sch311x_wdt_data.io_lock); + + /* -- Watchdog timer control -- + * Bit 0 Status Bit: 0 = Timer counting, 1 = Timeout occurred + * Bit 1 Reserved + * Bit 2 Force Timeout: 1 = Forces WD timeout event (self-cleaning) + * Bit 3 P20 Force Timeout enabled: + * 0 = P20 activity does not generate the WD timeout event + * 1 = P20 Allows rising edge of P20, from the keyboard + * controller, to force the WD timeout event. + * Bit 4-7 Reserved + */ + new_status = inb(sch311x_wdt_data.runtime_reg + WDT_CTRL); + if (new_status & 0x01) + *status |= WDIOF_CARDRESET; + + spin_unlock(&sch311x_wdt_data.io_lock); +} + +/* + * /dev/watchdog handling + */ + +static ssize_t sch311x_wdt_write(struct file *file, const char __user *buf, + size_t count, loff_t *ppos) +{ + if (count) { + if (!nowayout) { + size_t i; + + sch311x_wdt_expect_close = 0; + + for (i = 0; i != count; i++) { + char c; + if (get_user(c, buf + i)) + return -EFAULT; + if (c == 'V') + sch311x_wdt_expect_close = 42; + } + } + sch311x_wdt_keepalive(); + } + return count; +} + +static long sch311x_wdt_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) +{ + int status; + int new_timeout; + void __user *argp = (void __user *)arg; + int __user *p = argp; + static const struct watchdog_info ident = { + .options = WDIOF_KEEPALIVEPING | + WDIOF_SETTIMEOUT | + WDIOF_MAGICCLOSE, + .firmware_version = 1, + .identity = DRV_NAME, + }; + + switch (cmd) { + case WDIOC_GETSUPPORT: + if (copy_to_user(argp, &ident, sizeof(ident))) + return -EFAULT; + break; + + case WDIOC_GETSTATUS: + { + sch311x_wdt_get_status(&status); + return put_user(status, p); + } + case WDIOC_GETBOOTSTATUS: + return put_user(sch311x_wdt_data.boot_status, p); + + case WDIOC_SETOPTIONS: + { + int options, retval = -EINVAL; + + if (get_user(options, p)) + return -EFAULT; + if (options & WDIOS_DISABLECARD) { + sch311x_wdt_stop(); + retval = 0; + } + if (options & WDIOS_ENABLECARD) { + sch311x_wdt_start(); + retval = 0; + } + return retval; + } + case WDIOC_KEEPALIVE: + sch311x_wdt_keepalive(); + break; + + case WDIOC_SETTIMEOUT: + if (get_user(new_timeout, p)) + return -EFAULT; + if (sch311x_wdt_set_heartbeat(new_timeout)) + return -EINVAL; + sch311x_wdt_keepalive(); + /* Fall through */ + case WDIOC_GETTIMEOUT: + return put_user(timeout, p); + default: + return -ENOTTY; + } + return 0; +} + +static int sch311x_wdt_open(struct inode *inode, struct file *file) +{ + if (test_and_set_bit(0, &sch311x_wdt_is_open)) + return -EBUSY; + /* + * Activate + */ + sch311x_wdt_start(); + return nonseekable_open(inode, file); +} + +static int sch311x_wdt_close(struct inode *inode, struct file *file) +{ + if (sch311x_wdt_expect_close == 42) { + sch311x_wdt_stop(); + } else { + pr_crit("Unexpected close, not stopping watchdog!\n"); + sch311x_wdt_keepalive(); + } + clear_bit(0, &sch311x_wdt_is_open); + sch311x_wdt_expect_close = 0; + return 0; +} + +/* + * Kernel Interfaces + */ + +static const struct file_operations sch311x_wdt_fops = { + .owner = THIS_MODULE, + .llseek = no_llseek, + .write = sch311x_wdt_write, + .unlocked_ioctl = sch311x_wdt_ioctl, + .open = sch311x_wdt_open, + .release = sch311x_wdt_close, +}; + +static struct miscdevice sch311x_wdt_miscdev = { + .minor = WATCHDOG_MINOR, + .name = "watchdog", + .fops = &sch311x_wdt_fops, +}; + +/* + * Init & exit routines + */ + +static int sch311x_wdt_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + int err; + + spin_lock_init(&sch311x_wdt_data.io_lock); + + if (!request_region(sch311x_wdt_data.runtime_reg + GP60, 1, DRV_NAME)) { + dev_err(dev, "Failed to request region 0x%04x-0x%04x.\n", + sch311x_wdt_data.runtime_reg + GP60, + sch311x_wdt_data.runtime_reg + GP60); + err = -EBUSY; + goto exit; + } + + if (!request_region(sch311x_wdt_data.runtime_reg + WDT_TIME_OUT, 4, + DRV_NAME)) { + dev_err(dev, "Failed to request region 0x%04x-0x%04x.\n", + sch311x_wdt_data.runtime_reg + WDT_TIME_OUT, + sch311x_wdt_data.runtime_reg + WDT_CTRL); + err = -EBUSY; + goto exit_release_region; + } + + /* Make sure that the watchdog is not running */ + sch311x_wdt_stop(); + + /* Disable keyboard and mouse interaction and interrupt */ + /* -- Watchdog timer configuration -- + * Bit 0 Reserved + * Bit 1 Keyboard enable: 0* = No Reset, 1 = Reset WDT upon KBD Intr. + * Bit 2 Mouse enable: 0* = No Reset, 1 = Reset WDT upon Mouse Intr + * Bit 3 Reserved + * Bit 4-7 WDT Interrupt Mapping: (0000* = Disabled, + * 0001=IRQ1, 0010=(Invalid), 0011=IRQ3 to 1111=IRQ15) + */ + outb(0, sch311x_wdt_data.runtime_reg + WDT_CFG); + + /* Check that the heartbeat value is within it's range ; + * if not reset to the default */ + if (sch311x_wdt_set_heartbeat(timeout)) { + sch311x_wdt_set_heartbeat(WATCHDOG_TIMEOUT); + dev_info(dev, "timeout value must be 1<=x<=15300, using %d\n", + timeout); + } + + /* Get status at boot */ + sch311x_wdt_get_status(&sch311x_wdt_data.boot_status); + + sch311x_wdt_miscdev.parent = dev; + + err = misc_register(&sch311x_wdt_miscdev); + if (err != 0) { + dev_err(dev, "cannot register miscdev on minor=%d (err=%d)\n", + WATCHDOG_MINOR, err); + goto exit_release_region2; + } + + dev_info(dev, + "SMSC SCH311x WDT initialized. timeout=%d sec (nowayout=%d)\n", + timeout, nowayout); + + return 0; + +exit_release_region2: + release_region(sch311x_wdt_data.runtime_reg + WDT_TIME_OUT, 4); +exit_release_region: + release_region(sch311x_wdt_data.runtime_reg + GP60, 1); + sch311x_wdt_data.runtime_reg = 0; +exit: + return err; +} + +static int sch311x_wdt_remove(struct platform_device *pdev) +{ + /* Stop the timer before we leave */ + if (!nowayout) + sch311x_wdt_stop(); + + /* Deregister */ + misc_deregister(&sch311x_wdt_miscdev); + release_region(sch311x_wdt_data.runtime_reg + WDT_TIME_OUT, 4); + release_region(sch311x_wdt_data.runtime_reg + GP60, 1); + sch311x_wdt_data.runtime_reg = 0; + return 0; +} + +static void sch311x_wdt_shutdown(struct platform_device *dev) +{ + /* Turn the WDT off if we have a soft shutdown */ + sch311x_wdt_stop(); +} + +static struct platform_driver sch311x_wdt_driver = { + .probe = sch311x_wdt_probe, + .remove = sch311x_wdt_remove, + .shutdown = sch311x_wdt_shutdown, + .driver = { + .name = DRV_NAME, + }, +}; + +static int __init sch311x_detect(int sio_config_port, unsigned short *addr) +{ + int err = 0, reg; + unsigned short base_addr; + unsigned char dev_id; + + sch311x_sio_enter(sio_config_port); + + /* Check device ID. We currently know about: + * SCH3112 (0x7c), SCH3114 (0x7d), and SCH3116 (0x7f). */ + reg = force_id ? force_id : sch311x_sio_inb(sio_config_port, 0x20); + if (!(reg == 0x7c || reg == 0x7d || reg == 0x7f)) { + err = -ENODEV; + goto exit; + } + dev_id = reg == 0x7c ? 2 : reg == 0x7d ? 4 : 6; + + /* Select logical device A (runtime registers) */ + sch311x_sio_outb(sio_config_port, 0x07, 0x0a); + + /* Check if Logical Device Register is currently active */ + if ((sch311x_sio_inb(sio_config_port, 0x30) & 0x01) == 0) + pr_info("Seems that LDN 0x0a is not active...\n"); + + /* Get the base address of the runtime registers */ + base_addr = (sch311x_sio_inb(sio_config_port, 0x60) << 8) | + sch311x_sio_inb(sio_config_port, 0x61); + if (!base_addr) { + pr_err("Base address not set\n"); + err = -ENODEV; + goto exit; + } + *addr = base_addr; + + pr_info("Found an SMSC SCH311%d chip at 0x%04x\n", dev_id, base_addr); + +exit: + sch311x_sio_exit(sio_config_port); + return err; +} + +static int __init sch311x_wdt_init(void) +{ + int err, i, found = 0; + unsigned short addr = 0; + + for (i = 0; !found && sch311x_ioports[i]; i++) + if (sch311x_detect(sch311x_ioports[i], &addr) == 0) + found++; + + if (!found) + return -ENODEV; + + sch311x_wdt_data.runtime_reg = addr; + + err = platform_driver_register(&sch311x_wdt_driver); + if (err) + return err; + + sch311x_wdt_pdev = platform_device_register_simple(DRV_NAME, addr, + NULL, 0); + + if (IS_ERR(sch311x_wdt_pdev)) { + err = PTR_ERR(sch311x_wdt_pdev); + goto unreg_platform_driver; + } + + return 0; + +unreg_platform_driver: + platform_driver_unregister(&sch311x_wdt_driver); + return err; +} + +static void __exit sch311x_wdt_exit(void) +{ + platform_device_unregister(sch311x_wdt_pdev); + platform_driver_unregister(&sch311x_wdt_driver); +} + +module_init(sch311x_wdt_init); +module_exit(sch311x_wdt_exit); + +MODULE_AUTHOR("Wim Van Sebroeck <wim@iguana.be>"); +MODULE_DESCRIPTION("SMSC SCH311x WatchDog Timer Driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/watchdog/scx200_wdt.c b/drivers/watchdog/scx200_wdt.c new file mode 100644 index 000000000..836377cf9 --- /dev/null +++ b/drivers/watchdog/scx200_wdt.c @@ -0,0 +1,271 @@ +/* drivers/char/watchdog/scx200_wdt.c + + National Semiconductor SCx200 Watchdog support + + Copyright (c) 2001,2002 Christer Weinigel <wingel@nano-system.com> + + Some code taken from: + National Semiconductor PC87307/PC97307 (ala SC1200) WDT driver + (c) Copyright 2002 Zwane Mwaikambo <zwane@commfireservices.com> + + This program is free software; you can redistribute it and/or + modify it under the terms of the GNU General Public License as + published by the Free Software Foundation; either version 2 of the + License, or (at your option) any later version. + + The author(s) of this software shall not be held liable for damages + of any nature resulting due to the use of this software. This + software is provided AS-IS with no warranties. */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/init.h> +#include <linux/miscdevice.h> +#include <linux/watchdog.h> +#include <linux/notifier.h> +#include <linux/reboot.h> +#include <linux/fs.h> +#include <linux/ioport.h> +#include <linux/scx200.h> +#include <linux/uaccess.h> +#include <linux/io.h> + +#define DEBUG + +MODULE_AUTHOR("Christer Weinigel <wingel@nano-system.com>"); +MODULE_DESCRIPTION("NatSemi SCx200 Watchdog Driver"); +MODULE_LICENSE("GPL"); + +static int margin = 60; /* in seconds */ +module_param(margin, int, 0); +MODULE_PARM_DESC(margin, "Watchdog margin in seconds"); + +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); +MODULE_PARM_DESC(nowayout, "Disable watchdog shutdown on close"); + +static u16 wdto_restart; +static char expect_close; +static unsigned long open_lock; +static DEFINE_SPINLOCK(scx_lock); + +/* Bits of the WDCNFG register */ +#define W_ENABLE 0x00fa /* Enable watchdog */ +#define W_DISABLE 0x0000 /* Disable watchdog */ + +/* The scaling factor for the timer, this depends on the value of W_ENABLE */ +#define W_SCALE (32768/1024) + +static void scx200_wdt_ping(void) +{ + spin_lock(&scx_lock); + outw(wdto_restart, scx200_cb_base + SCx200_WDT_WDTO); + spin_unlock(&scx_lock); +} + +static void scx200_wdt_update_margin(void) +{ + pr_info("timer margin %d seconds\n", margin); + wdto_restart = margin * W_SCALE; +} + +static void scx200_wdt_enable(void) +{ + pr_debug("enabling watchdog timer, wdto_restart = %d\n", wdto_restart); + + spin_lock(&scx_lock); + outw(0, scx200_cb_base + SCx200_WDT_WDTO); + outb(SCx200_WDT_WDSTS_WDOVF, scx200_cb_base + SCx200_WDT_WDSTS); + outw(W_ENABLE, scx200_cb_base + SCx200_WDT_WDCNFG); + spin_unlock(&scx_lock); + + scx200_wdt_ping(); +} + +static void scx200_wdt_disable(void) +{ + pr_debug("disabling watchdog timer\n"); + + spin_lock(&scx_lock); + outw(0, scx200_cb_base + SCx200_WDT_WDTO); + outb(SCx200_WDT_WDSTS_WDOVF, scx200_cb_base + SCx200_WDT_WDSTS); + outw(W_DISABLE, scx200_cb_base + SCx200_WDT_WDCNFG); + spin_unlock(&scx_lock); +} + +static int scx200_wdt_open(struct inode *inode, struct file *file) +{ + /* only allow one at a time */ + if (test_and_set_bit(0, &open_lock)) + return -EBUSY; + scx200_wdt_enable(); + + return nonseekable_open(inode, file); +} + +static int scx200_wdt_release(struct inode *inode, struct file *file) +{ + if (expect_close != 42) + pr_warn("watchdog device closed unexpectedly, will not disable the watchdog timer\n"); + else if (!nowayout) + scx200_wdt_disable(); + expect_close = 0; + clear_bit(0, &open_lock); + + return 0; +} + +static int scx200_wdt_notify_sys(struct notifier_block *this, + unsigned long code, void *unused) +{ + if (code == SYS_HALT || code == SYS_POWER_OFF) + if (!nowayout) + scx200_wdt_disable(); + + return NOTIFY_DONE; +} + +static struct notifier_block scx200_wdt_notifier = { + .notifier_call = scx200_wdt_notify_sys, +}; + +static ssize_t scx200_wdt_write(struct file *file, const char __user *data, + size_t len, loff_t *ppos) +{ + /* check for a magic close character */ + if (len) { + size_t i; + + scx200_wdt_ping(); + + expect_close = 0; + for (i = 0; i < len; ++i) { + char c; + if (get_user(c, data + i)) + return -EFAULT; + if (c == 'V') + expect_close = 42; + } + + return len; + } + + return 0; +} + +static long scx200_wdt_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) +{ + void __user *argp = (void __user *)arg; + int __user *p = argp; + static const struct watchdog_info ident = { + .identity = "NatSemi SCx200 Watchdog", + .firmware_version = 1, + .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | + WDIOF_MAGICCLOSE, + }; + int new_margin; + + switch (cmd) { + case WDIOC_GETSUPPORT: + if (copy_to_user(argp, &ident, sizeof(ident))) + return -EFAULT; + return 0; + case WDIOC_GETSTATUS: + case WDIOC_GETBOOTSTATUS: + if (put_user(0, p)) + return -EFAULT; + return 0; + case WDIOC_KEEPALIVE: + scx200_wdt_ping(); + return 0; + case WDIOC_SETTIMEOUT: + if (get_user(new_margin, p)) + return -EFAULT; + if (new_margin < 1) + return -EINVAL; + margin = new_margin; + scx200_wdt_update_margin(); + scx200_wdt_ping(); + case WDIOC_GETTIMEOUT: + if (put_user(margin, p)) + return -EFAULT; + return 0; + default: + return -ENOTTY; + } +} + +static const struct file_operations scx200_wdt_fops = { + .owner = THIS_MODULE, + .llseek = no_llseek, + .write = scx200_wdt_write, + .unlocked_ioctl = scx200_wdt_ioctl, + .open = scx200_wdt_open, + .release = scx200_wdt_release, +}; + +static struct miscdevice scx200_wdt_miscdev = { + .minor = WATCHDOG_MINOR, + .name = "watchdog", + .fops = &scx200_wdt_fops, +}; + +static int __init scx200_wdt_init(void) +{ + int r; + + pr_debug("NatSemi SCx200 Watchdog Driver\n"); + + /* check that we have found the configuration block */ + if (!scx200_cb_present()) + return -ENODEV; + + if (!request_region(scx200_cb_base + SCx200_WDT_OFFSET, + SCx200_WDT_SIZE, + "NatSemi SCx200 Watchdog")) { + pr_warn("watchdog I/O region busy\n"); + return -EBUSY; + } + + scx200_wdt_update_margin(); + scx200_wdt_disable(); + + r = register_reboot_notifier(&scx200_wdt_notifier); + if (r) { + pr_err("unable to register reboot notifier\n"); + release_region(scx200_cb_base + SCx200_WDT_OFFSET, + SCx200_WDT_SIZE); + return r; + } + + r = misc_register(&scx200_wdt_miscdev); + if (r) { + unregister_reboot_notifier(&scx200_wdt_notifier); + release_region(scx200_cb_base + SCx200_WDT_OFFSET, + SCx200_WDT_SIZE); + return r; + } + + return 0; +} + +static void __exit scx200_wdt_cleanup(void) +{ + misc_deregister(&scx200_wdt_miscdev); + unregister_reboot_notifier(&scx200_wdt_notifier); + release_region(scx200_cb_base + SCx200_WDT_OFFSET, + SCx200_WDT_SIZE); +} + +module_init(scx200_wdt_init); +module_exit(scx200_wdt_cleanup); + +/* + Local variables: + compile-command: "make -k -C ../.. SUBDIRS=drivers/char modules" + c-basic-offset: 8 + End: +*/ diff --git a/drivers/watchdog/shwdt.c b/drivers/watchdog/shwdt.c new file mode 100644 index 000000000..a7d6425db --- /dev/null +++ b/drivers/watchdog/shwdt.c @@ -0,0 +1,350 @@ +/* + * drivers/watchdog/shwdt.c + * + * Watchdog driver for integrated watchdog in the SuperH processors. + * + * Copyright (C) 2001 - 2012 Paul Mundt <lethal@linux-sh.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * 14-Dec-2001 Matt Domsch <Matt_Domsch@dell.com> + * Added nowayout module option to override CONFIG_WATCHDOG_NOWAYOUT + * + * 19-Apr-2002 Rob Radez <rob@osinvestor.com> + * Added expect close support, made emulated timeout runtime changeable + * general cleanups, add some ioctls + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/platform_device.h> +#include <linux/init.h> +#include <linux/types.h> +#include <linux/spinlock.h> +#include <linux/watchdog.h> +#include <linux/pm_runtime.h> +#include <linux/fs.h> +#include <linux/mm.h> +#include <linux/slab.h> +#include <linux/io.h> +#include <linux/clk.h> +#include <linux/err.h> +#include <asm/watchdog.h> + +#define DRV_NAME "sh-wdt" + +/* + * Default clock division ratio is 5.25 msecs. For an additional table of + * values, consult the asm-sh/watchdog.h. Overload this at module load + * time. + * + * In order for this to work reliably we need to have HZ set to 1000 or + * something quite higher than 100 (or we need a proper high-res timer + * implementation that will deal with this properly), otherwise the 10ms + * resolution of a jiffy is enough to trigger the overflow. For things like + * the SH-4 and SH-5, this isn't necessarily that big of a problem, though + * for the SH-2 and SH-3, this isn't recommended unless the WDT is absolutely + * necssary. + * + * As a result of this timing problem, the only modes that are particularly + * feasible are the 4096 and the 2048 divisors, which yield 5.25 and 2.62ms + * overflow periods respectively. + * + * Also, since we can't really expect userspace to be responsive enough + * before the overflow happens, we maintain two separate timers .. One in + * the kernel for clearing out WOVF every 2ms or so (again, this depends on + * HZ == 1000), and another for monitoring userspace writes to the WDT device. + * + * As such, we currently use a configurable heartbeat interval which defaults + * to 30s. In this case, the userspace daemon is only responsible for periodic + * writes to the device before the next heartbeat is scheduled. If the daemon + * misses its deadline, the kernel timer will allow the WDT to overflow. + */ +static int clock_division_ratio = WTCSR_CKS_4096; +#define next_ping_period(cks) (jiffies + msecs_to_jiffies(cks - 4)) + +#define WATCHDOG_HEARTBEAT 30 /* 30 sec default heartbeat */ +static int heartbeat = WATCHDOG_HEARTBEAT; /* in seconds */ +static bool nowayout = WATCHDOG_NOWAYOUT; +static unsigned long next_heartbeat; + +struct sh_wdt { + void __iomem *base; + struct device *dev; + struct clk *clk; + spinlock_t lock; + + struct timer_list timer; +}; + +static int sh_wdt_start(struct watchdog_device *wdt_dev) +{ + struct sh_wdt *wdt = watchdog_get_drvdata(wdt_dev); + unsigned long flags; + u8 csr; + + pm_runtime_get_sync(wdt->dev); + clk_enable(wdt->clk); + + spin_lock_irqsave(&wdt->lock, flags); + + next_heartbeat = jiffies + (heartbeat * HZ); + mod_timer(&wdt->timer, next_ping_period(clock_division_ratio)); + + csr = sh_wdt_read_csr(); + csr |= WTCSR_WT | clock_division_ratio; + sh_wdt_write_csr(csr); + + sh_wdt_write_cnt(0); + + /* + * These processors have a bit of an inconsistent initialization + * process.. starting with SH-3, RSTS was moved to WTCSR, and the + * RSTCSR register was removed. + * + * On the SH-2 however, in addition with bits being in different + * locations, we must deal with RSTCSR outright.. + */ + csr = sh_wdt_read_csr(); + csr |= WTCSR_TME; + csr &= ~WTCSR_RSTS; + sh_wdt_write_csr(csr); + +#ifdef CONFIG_CPU_SH2 + csr = sh_wdt_read_rstcsr(); + csr &= ~RSTCSR_RSTS; + sh_wdt_write_rstcsr(csr); +#endif + spin_unlock_irqrestore(&wdt->lock, flags); + + return 0; +} + +static int sh_wdt_stop(struct watchdog_device *wdt_dev) +{ + struct sh_wdt *wdt = watchdog_get_drvdata(wdt_dev); + unsigned long flags; + u8 csr; + + spin_lock_irqsave(&wdt->lock, flags); + + del_timer(&wdt->timer); + + csr = sh_wdt_read_csr(); + csr &= ~WTCSR_TME; + sh_wdt_write_csr(csr); + + spin_unlock_irqrestore(&wdt->lock, flags); + + clk_disable(wdt->clk); + pm_runtime_put_sync(wdt->dev); + + return 0; +} + +static int sh_wdt_keepalive(struct watchdog_device *wdt_dev) +{ + struct sh_wdt *wdt = watchdog_get_drvdata(wdt_dev); + unsigned long flags; + + spin_lock_irqsave(&wdt->lock, flags); + next_heartbeat = jiffies + (heartbeat * HZ); + spin_unlock_irqrestore(&wdt->lock, flags); + + return 0; +} + +static int sh_wdt_set_heartbeat(struct watchdog_device *wdt_dev, unsigned t) +{ + struct sh_wdt *wdt = watchdog_get_drvdata(wdt_dev); + unsigned long flags; + + if (unlikely(t < 1 || t > 3600)) /* arbitrary upper limit */ + return -EINVAL; + + spin_lock_irqsave(&wdt->lock, flags); + heartbeat = t; + wdt_dev->timeout = t; + spin_unlock_irqrestore(&wdt->lock, flags); + + return 0; +} + +static void sh_wdt_ping(struct timer_list *t) +{ + struct sh_wdt *wdt = from_timer(wdt, t, timer); + unsigned long flags; + + spin_lock_irqsave(&wdt->lock, flags); + if (time_before(jiffies, next_heartbeat)) { + u8 csr; + + csr = sh_wdt_read_csr(); + csr &= ~WTCSR_IOVF; + sh_wdt_write_csr(csr); + + sh_wdt_write_cnt(0); + + mod_timer(&wdt->timer, next_ping_period(clock_division_ratio)); + } else + dev_warn(wdt->dev, "Heartbeat lost! Will not ping " + "the watchdog\n"); + spin_unlock_irqrestore(&wdt->lock, flags); +} + +static const struct watchdog_info sh_wdt_info = { + .options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT | + WDIOF_MAGICCLOSE, + .firmware_version = 1, + .identity = "SH WDT", +}; + +static const struct watchdog_ops sh_wdt_ops = { + .owner = THIS_MODULE, + .start = sh_wdt_start, + .stop = sh_wdt_stop, + .ping = sh_wdt_keepalive, + .set_timeout = sh_wdt_set_heartbeat, +}; + +static struct watchdog_device sh_wdt_dev = { + .info = &sh_wdt_info, + .ops = &sh_wdt_ops, +}; + +static int sh_wdt_probe(struct platform_device *pdev) +{ + struct sh_wdt *wdt; + struct resource *res; + int rc; + + /* + * As this driver only covers the global watchdog case, reject + * any attempts to register per-CPU watchdogs. + */ + if (pdev->id != -1) + return -EINVAL; + + wdt = devm_kzalloc(&pdev->dev, sizeof(struct sh_wdt), GFP_KERNEL); + if (unlikely(!wdt)) + return -ENOMEM; + + wdt->dev = &pdev->dev; + + wdt->clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(wdt->clk)) { + /* + * Clock framework support is optional, continue on + * anyways if we don't find a matching clock. + */ + wdt->clk = NULL; + } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + wdt->base = devm_ioremap_resource(wdt->dev, res); + if (IS_ERR(wdt->base)) + return PTR_ERR(wdt->base); + + watchdog_set_nowayout(&sh_wdt_dev, nowayout); + watchdog_set_drvdata(&sh_wdt_dev, wdt); + sh_wdt_dev.parent = &pdev->dev; + + spin_lock_init(&wdt->lock); + + rc = sh_wdt_set_heartbeat(&sh_wdt_dev, heartbeat); + if (unlikely(rc)) { + /* Default timeout if invalid */ + sh_wdt_set_heartbeat(&sh_wdt_dev, WATCHDOG_HEARTBEAT); + + dev_warn(&pdev->dev, + "heartbeat value must be 1<=x<=3600, using %d\n", + sh_wdt_dev.timeout); + } + + dev_info(&pdev->dev, "configured with heartbeat=%d sec (nowayout=%d)\n", + sh_wdt_dev.timeout, nowayout); + + rc = watchdog_register_device(&sh_wdt_dev); + if (unlikely(rc)) { + dev_err(&pdev->dev, "Can't register watchdog (err=%d)\n", rc); + return rc; + } + + timer_setup(&wdt->timer, sh_wdt_ping, 0); + wdt->timer.expires = next_ping_period(clock_division_ratio); + + dev_info(&pdev->dev, "initialized.\n"); + + pm_runtime_enable(&pdev->dev); + + return 0; +} + +static int sh_wdt_remove(struct platform_device *pdev) +{ + watchdog_unregister_device(&sh_wdt_dev); + + pm_runtime_disable(&pdev->dev); + + return 0; +} + +static void sh_wdt_shutdown(struct platform_device *pdev) +{ + sh_wdt_stop(&sh_wdt_dev); +} + +static struct platform_driver sh_wdt_driver = { + .driver = { + .name = DRV_NAME, + }, + + .probe = sh_wdt_probe, + .remove = sh_wdt_remove, + .shutdown = sh_wdt_shutdown, +}; + +static int __init sh_wdt_init(void) +{ + if (unlikely(clock_division_ratio < 0x5 || + clock_division_ratio > 0x7)) { + clock_division_ratio = WTCSR_CKS_4096; + + pr_info("divisor must be 0x5<=x<=0x7, using %d\n", + clock_division_ratio); + } + + return platform_driver_register(&sh_wdt_driver); +} + +static void __exit sh_wdt_exit(void) +{ + platform_driver_unregister(&sh_wdt_driver); +} +module_init(sh_wdt_init); +module_exit(sh_wdt_exit); + +MODULE_AUTHOR("Paul Mundt <lethal@linux-sh.org>"); +MODULE_DESCRIPTION("SuperH watchdog driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:" DRV_NAME); + +module_param(clock_division_ratio, int, 0); +MODULE_PARM_DESC(clock_division_ratio, + "Clock division ratio. Valid ranges are from 0x5 (1.31ms) " + "to 0x7 (5.25ms). (default=" __MODULE_STRING(WTCSR_CKS_4096) ")"); + +module_param(heartbeat, int, 0); +MODULE_PARM_DESC(heartbeat, + "Watchdog heartbeat in seconds. (1 <= heartbeat <= 3600, default=" + __MODULE_STRING(WATCHDOG_HEARTBEAT) ")"); + +module_param(nowayout, bool, 0); +MODULE_PARM_DESC(nowayout, + "Watchdog cannot be stopped once started (default=" + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); diff --git a/drivers/watchdog/sirfsoc_wdt.c b/drivers/watchdog/sirfsoc_wdt.c new file mode 100644 index 000000000..ac0c9d2c4 --- /dev/null +++ b/drivers/watchdog/sirfsoc_wdt.c @@ -0,0 +1,231 @@ +/* + * Watchdog driver for CSR SiRFprimaII and SiRFatlasVI + * + * Copyright (c) 2013 Cambridge Silicon Radio Limited, a CSR plc group company. + * + * Licensed under GPLv2 or later. + */ + +#include <linux/module.h> +#include <linux/watchdog.h> +#include <linux/platform_device.h> +#include <linux/moduleparam.h> +#include <linux/of.h> +#include <linux/io.h> +#include <linux/uaccess.h> + +#define CLOCK_FREQ 1000000 + +#define SIRFSOC_TIMER_COUNTER_LO 0x0000 +#define SIRFSOC_TIMER_MATCH_0 0x0008 +#define SIRFSOC_TIMER_INT_EN 0x0024 +#define SIRFSOC_TIMER_WATCHDOG_EN 0x0028 +#define SIRFSOC_TIMER_LATCH 0x0030 +#define SIRFSOC_TIMER_LATCHED_LO 0x0034 + +#define SIRFSOC_TIMER_WDT_INDEX 5 + +#define SIRFSOC_WDT_MIN_TIMEOUT 30 /* 30 secs */ +#define SIRFSOC_WDT_MAX_TIMEOUT (10 * 60) /* 10 mins */ +#define SIRFSOC_WDT_DEFAULT_TIMEOUT 30 /* 30 secs */ + +static unsigned int timeout; +static bool nowayout = WATCHDOG_NOWAYOUT; + +module_param(timeout, uint, 0); +module_param(nowayout, bool, 0); + +MODULE_PARM_DESC(timeout, "Default watchdog timeout (in seconds)"); +MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); + +static void __iomem *sirfsoc_wdt_base(struct watchdog_device *wdd) +{ + return (void __iomem __force *)watchdog_get_drvdata(wdd); +} + +static unsigned int sirfsoc_wdt_gettimeleft(struct watchdog_device *wdd) +{ + u32 counter, match; + void __iomem *wdt_base; + int time_left; + + wdt_base = sirfsoc_wdt_base(wdd); + counter = readl(wdt_base + SIRFSOC_TIMER_COUNTER_LO); + match = readl(wdt_base + + SIRFSOC_TIMER_MATCH_0 + (SIRFSOC_TIMER_WDT_INDEX << 2)); + + time_left = match - counter; + + return time_left / CLOCK_FREQ; +} + +static int sirfsoc_wdt_updatetimeout(struct watchdog_device *wdd) +{ + u32 counter, timeout_ticks; + void __iomem *wdt_base; + + timeout_ticks = wdd->timeout * CLOCK_FREQ; + wdt_base = sirfsoc_wdt_base(wdd); + + /* Enable the latch before reading the LATCH_LO register */ + writel(1, wdt_base + SIRFSOC_TIMER_LATCH); + + /* Set the TO value */ + counter = readl(wdt_base + SIRFSOC_TIMER_LATCHED_LO); + + counter += timeout_ticks; + + writel(counter, wdt_base + + SIRFSOC_TIMER_MATCH_0 + (SIRFSOC_TIMER_WDT_INDEX << 2)); + + return 0; +} + +static int sirfsoc_wdt_enable(struct watchdog_device *wdd) +{ + void __iomem *wdt_base = sirfsoc_wdt_base(wdd); + sirfsoc_wdt_updatetimeout(wdd); + + /* + * NOTE: If interrupt is not enabled + * then WD-Reset doesn't get generated at all. + */ + writel(readl(wdt_base + SIRFSOC_TIMER_INT_EN) + | (1 << SIRFSOC_TIMER_WDT_INDEX), + wdt_base + SIRFSOC_TIMER_INT_EN); + writel(1, wdt_base + SIRFSOC_TIMER_WATCHDOG_EN); + + return 0; +} + +static int sirfsoc_wdt_disable(struct watchdog_device *wdd) +{ + void __iomem *wdt_base = sirfsoc_wdt_base(wdd); + + writel(0, wdt_base + SIRFSOC_TIMER_WATCHDOG_EN); + writel(readl(wdt_base + SIRFSOC_TIMER_INT_EN) + & (~(1 << SIRFSOC_TIMER_WDT_INDEX)), + wdt_base + SIRFSOC_TIMER_INT_EN); + + return 0; +} + +static int sirfsoc_wdt_settimeout(struct watchdog_device *wdd, unsigned int to) +{ + wdd->timeout = to; + sirfsoc_wdt_updatetimeout(wdd); + + return 0; +} + +#define OPTIONS (WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE) + +static const struct watchdog_info sirfsoc_wdt_ident = { + .options = OPTIONS, + .firmware_version = 0, + .identity = "SiRFSOC Watchdog", +}; + +static const struct watchdog_ops sirfsoc_wdt_ops = { + .owner = THIS_MODULE, + .start = sirfsoc_wdt_enable, + .stop = sirfsoc_wdt_disable, + .get_timeleft = sirfsoc_wdt_gettimeleft, + .ping = sirfsoc_wdt_updatetimeout, + .set_timeout = sirfsoc_wdt_settimeout, +}; + +static struct watchdog_device sirfsoc_wdd = { + .info = &sirfsoc_wdt_ident, + .ops = &sirfsoc_wdt_ops, + .timeout = SIRFSOC_WDT_DEFAULT_TIMEOUT, + .min_timeout = SIRFSOC_WDT_MIN_TIMEOUT, + .max_timeout = SIRFSOC_WDT_MAX_TIMEOUT, +}; + +static int sirfsoc_wdt_probe(struct platform_device *pdev) +{ + struct resource *res; + int ret; + void __iomem *base; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(base)) + return PTR_ERR(base); + + watchdog_set_drvdata(&sirfsoc_wdd, (__force void *)base); + + watchdog_init_timeout(&sirfsoc_wdd, timeout, &pdev->dev); + watchdog_set_nowayout(&sirfsoc_wdd, nowayout); + sirfsoc_wdd.parent = &pdev->dev; + + ret = watchdog_register_device(&sirfsoc_wdd); + if (ret) + return ret; + + platform_set_drvdata(pdev, &sirfsoc_wdd); + + return 0; +} + +static void sirfsoc_wdt_shutdown(struct platform_device *pdev) +{ + struct watchdog_device *wdd = platform_get_drvdata(pdev); + + sirfsoc_wdt_disable(wdd); +} + +static int sirfsoc_wdt_remove(struct platform_device *pdev) +{ + sirfsoc_wdt_shutdown(pdev); + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int sirfsoc_wdt_suspend(struct device *dev) +{ + return 0; +} + +static int sirfsoc_wdt_resume(struct device *dev) +{ + struct watchdog_device *wdd = dev_get_drvdata(dev); + + /* + * NOTE: Since timer controller registers settings are saved + * and restored back by the timer-prima2.c, so we need not + * update WD settings except refreshing timeout. + */ + sirfsoc_wdt_updatetimeout(wdd); + + return 0; +} +#endif + +static SIMPLE_DEV_PM_OPS(sirfsoc_wdt_pm_ops, + sirfsoc_wdt_suspend, sirfsoc_wdt_resume); + +static const struct of_device_id sirfsoc_wdt_of_match[] = { + { .compatible = "sirf,prima2-tick"}, + {}, +}; +MODULE_DEVICE_TABLE(of, sirfsoc_wdt_of_match); + +static struct platform_driver sirfsoc_wdt_driver = { + .driver = { + .name = "sirfsoc-wdt", + .pm = &sirfsoc_wdt_pm_ops, + .of_match_table = sirfsoc_wdt_of_match, + }, + .probe = sirfsoc_wdt_probe, + .remove = sirfsoc_wdt_remove, + .shutdown = sirfsoc_wdt_shutdown, +}; +module_platform_driver(sirfsoc_wdt_driver); + +MODULE_DESCRIPTION("SiRF SoC watchdog driver"); +MODULE_AUTHOR("Xianglong Du <Xianglong.Du@csr.com>"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:sirfsoc-wdt"); diff --git a/drivers/watchdog/smsc37b787_wdt.c b/drivers/watchdog/smsc37b787_wdt.c new file mode 100644 index 000000000..445ea1ad1 --- /dev/null +++ b/drivers/watchdog/smsc37b787_wdt.c @@ -0,0 +1,618 @@ +/* + * SMsC 37B787 Watchdog Timer driver for Linux 2.6.x.x + * + * Based on acquirewdt.c by Alan Cox <alan@lxorguk.ukuu.org.uk> + * and some other existing drivers + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * The authors do NOT admit liability nor provide warranty for + * any of this software. This material is provided "AS-IS" in + * the hope that it may be useful for others. + * + * (C) Copyright 2003-2006 Sven Anders <anders@anduras.de> + * + * History: + * 2003 - Created version 1.0 for Linux 2.4.x. + * 2006 - Ported to Linux 2.6, added nowayout and MAGICCLOSE + * features. Released version 1.1 + * + * Theory of operation: + * + * A Watchdog Timer (WDT) is a hardware circuit that can + * reset the computer system in case of a software fault. + * You probably knew that already. + * + * Usually a userspace daemon will notify the kernel WDT driver + * via the /dev/watchdog special device file that userspace is + * still alive, at regular intervals. When such a notification + * occurs, the driver will usually tell the hardware watchdog + * that everything is in order, and that the watchdog should wait + * for yet another little while to reset the system. + * If userspace fails (RAM error, kernel bug, whatever), the + * notifications cease to occur, and the hardware watchdog will + * reset the system (causing a reboot) after the timeout occurs. + * + * Create device with: + * mknod /dev/watchdog c 10 130 + * + * For an example userspace keep-alive daemon, see: + * Documentation/watchdog/wdt.txt + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/types.h> +#include <linux/miscdevice.h> +#include <linux/watchdog.h> +#include <linux/delay.h> +#include <linux/fs.h> +#include <linux/ioport.h> +#include <linux/notifier.h> +#include <linux/reboot.h> +#include <linux/init.h> +#include <linux/spinlock.h> +#include <linux/io.h> +#include <linux/uaccess.h> + + +/* enable support for minutes as units? */ +/* (does not always work correctly, so disabled by default!) */ +#define SMSC_SUPPORT_MINUTES +#undef SMSC_SUPPORT_MINUTES + +#define MAX_TIMEOUT 255 + +#define UNIT_SECOND 0 +#define UNIT_MINUTE 1 + +#define VERSION "1.1" + +#define IOPORT 0x3F0 +#define IOPORT_SIZE 2 +#define IODEV_NO 8 + +static int unit = UNIT_SECOND; /* timer's unit */ +static int timeout = 60; /* timeout value: default is 60 "units" */ +static unsigned long timer_enabled; /* is the timer enabled? */ + +static char expect_close; /* is the close expected? */ + +static DEFINE_SPINLOCK(io_lock);/* to guard the watchdog from io races */ + +static bool nowayout = WATCHDOG_NOWAYOUT; + +/* -- Low level function ----------------------------------------*/ + +/* unlock the IO chip */ + +static inline void open_io_config(void) +{ + outb(0x55, IOPORT); + mdelay(1); + outb(0x55, IOPORT); +} + +/* lock the IO chip */ +static inline void close_io_config(void) +{ + outb(0xAA, IOPORT); +} + +/* select the IO device */ +static inline void select_io_device(unsigned char devno) +{ + outb(0x07, IOPORT); + outb(devno, IOPORT+1); +} + +/* write to the control register */ +static inline void write_io_cr(unsigned char reg, unsigned char data) +{ + outb(reg, IOPORT); + outb(data, IOPORT+1); +} + +/* read from the control register */ +static inline char read_io_cr(unsigned char reg) +{ + outb(reg, IOPORT); + return inb(IOPORT+1); +} + +/* -- Medium level functions ------------------------------------*/ + +static inline void gpio_bit12(unsigned char reg) +{ + /* -- General Purpose I/O Bit 1.2 -- + * Bit 0, In/Out: 0 = Output, 1 = Input + * Bit 1, Polarity: 0 = No Invert, 1 = Invert + * Bit 2, Group Enable Intr.: 0 = Disable, 1 = Enable + * Bit 3/4, Function select: 00 = GPI/O, 01 = WDT, 10 = P17, + * 11 = Either Edge Triggered Intr. 2 + * Bit 5/6 (Reserved) + * Bit 7, Output Type: 0 = Push Pull Bit, 1 = Open Drain + */ + write_io_cr(0xE2, reg); +} + +static inline void gpio_bit13(unsigned char reg) +{ + /* -- General Purpose I/O Bit 1.3 -- + * Bit 0, In/Out: 0 = Output, 1 = Input + * Bit 1, Polarity: 0 = No Invert, 1 = Invert + * Bit 2, Group Enable Intr.: 0 = Disable, 1 = Enable + * Bit 3, Function select: 0 = GPI/O, 1 = LED + * Bit 4-6 (Reserved) + * Bit 7, Output Type: 0 = Push Pull Bit, 1 = Open Drain + */ + write_io_cr(0xE3, reg); +} + +static inline void wdt_timer_units(unsigned char new_units) +{ + /* -- Watchdog timer units -- + * Bit 0-6 (Reserved) + * Bit 7, WDT Time-out Value Units Select + * (0 = Minutes, 1 = Seconds) + */ + write_io_cr(0xF1, new_units); +} + +static inline void wdt_timeout_value(unsigned char new_timeout) +{ + /* -- Watchdog Timer Time-out Value -- + * Bit 0-7 Binary coded units (0=Disabled, 1..255) + */ + write_io_cr(0xF2, new_timeout); +} + +static inline void wdt_timer_conf(unsigned char conf) +{ + /* -- Watchdog timer configuration -- + * Bit 0 Joystick enable: 0* = No Reset, 1 = Reset WDT upon + * Gameport I/O + * Bit 1 Keyboard enable: 0* = No Reset, 1 = Reset WDT upon KBD Intr. + * Bit 2 Mouse enable: 0* = No Reset, 1 = Reset WDT upon Mouse Intr + * Bit 3 Reset the timer + * (Wrong in SMsC documentation? Given as: PowerLED Timout + * Enabled) + * Bit 4-7 WDT Interrupt Mapping: (0000* = Disabled, + * 0001=IRQ1, 0010=(Invalid), 0011=IRQ3 to 1111=IRQ15) + */ + write_io_cr(0xF3, conf); +} + +static inline void wdt_timer_ctrl(unsigned char reg) +{ + /* -- Watchdog timer control -- + * Bit 0 Status Bit: 0 = Timer counting, 1 = Timeout occurred + * Bit 1 Power LED Toggle: 0 = Disable Toggle, 1 = Toggle at 1 Hz + * Bit 2 Force Timeout: 1 = Forces WD timeout event (self-cleaning) + * Bit 3 P20 Force Timeout enabled: + * 0 = P20 activity does not generate the WD timeout event + * 1 = P20 Allows rising edge of P20, from the keyboard + * controller, to force the WD timeout event. + * Bit 4 (Reserved) + * -- Soft power management -- + * Bit 5 Stop Counter: 1 = Stop software power down counter + * set via register 0xB8, (self-cleaning) + * (Upon read: 0 = Counter running, 1 = Counter stopped) + * Bit 6 Restart Counter: 1 = Restart software power down counter + * set via register 0xB8, (self-cleaning) + * Bit 7 SPOFF: 1 = Force software power down (self-cleaning) + */ + write_io_cr(0xF4, reg); +} + +/* -- Higher level functions ------------------------------------*/ + +/* initialize watchdog */ + +static void wb_smsc_wdt_initialize(void) +{ + unsigned char old; + + spin_lock(&io_lock); + open_io_config(); + select_io_device(IODEV_NO); + + /* enable the watchdog */ + gpio_bit13(0x08); /* Select pin 80 = LED not GPIO */ + gpio_bit12(0x0A); /* Set pin 79 = WDT not + GPIO/Output/Polarity=Invert */ + /* disable the timeout */ + wdt_timeout_value(0); + + /* reset control register */ + wdt_timer_ctrl(0x00); + + /* reset configuration register */ + wdt_timer_conf(0x00); + + /* read old (timer units) register */ + old = read_io_cr(0xF1) & 0x7F; + if (unit == UNIT_SECOND) + old |= 0x80; /* set to seconds */ + + /* set the watchdog timer units */ + wdt_timer_units(old); + + close_io_config(); + spin_unlock(&io_lock); +} + +/* shutdown the watchdog */ + +static void wb_smsc_wdt_shutdown(void) +{ + spin_lock(&io_lock); + open_io_config(); + select_io_device(IODEV_NO); + + /* disable the watchdog */ + gpio_bit13(0x09); + gpio_bit12(0x09); + + /* reset watchdog config register */ + wdt_timer_conf(0x00); + + /* reset watchdog control register */ + wdt_timer_ctrl(0x00); + + /* disable timeout */ + wdt_timeout_value(0x00); + + close_io_config(); + spin_unlock(&io_lock); +} + +/* set timeout => enable watchdog */ + +static void wb_smsc_wdt_set_timeout(unsigned char new_timeout) +{ + spin_lock(&io_lock); + open_io_config(); + select_io_device(IODEV_NO); + + /* set Power LED to blink, if we enable the timeout */ + wdt_timer_ctrl((new_timeout == 0) ? 0x00 : 0x02); + + /* set timeout value */ + wdt_timeout_value(new_timeout); + + close_io_config(); + spin_unlock(&io_lock); +} + +/* get timeout */ + +static unsigned char wb_smsc_wdt_get_timeout(void) +{ + unsigned char set_timeout; + + spin_lock(&io_lock); + open_io_config(); + select_io_device(IODEV_NO); + set_timeout = read_io_cr(0xF2); + close_io_config(); + spin_unlock(&io_lock); + + return set_timeout; +} + +/* disable watchdog */ + +static void wb_smsc_wdt_disable(void) +{ + /* set the timeout to 0 to disable the watchdog */ + wb_smsc_wdt_set_timeout(0); +} + +/* enable watchdog by setting the current timeout */ + +static void wb_smsc_wdt_enable(void) +{ + /* set the current timeout... */ + wb_smsc_wdt_set_timeout(timeout); +} + +/* reset the timer */ + +static void wb_smsc_wdt_reset_timer(void) +{ + spin_lock(&io_lock); + open_io_config(); + select_io_device(IODEV_NO); + + /* reset the timer */ + wdt_timeout_value(timeout); + wdt_timer_conf(0x08); + + close_io_config(); + spin_unlock(&io_lock); +} + +/* return, if the watchdog is enabled (timeout is set...) */ + +static int wb_smsc_wdt_status(void) +{ + return (wb_smsc_wdt_get_timeout() == 0) ? 0 : WDIOF_KEEPALIVEPING; +} + + +/* -- File operations -------------------------------------------*/ + +/* open => enable watchdog and set initial timeout */ + +static int wb_smsc_wdt_open(struct inode *inode, struct file *file) +{ + /* /dev/watchdog can only be opened once */ + + if (test_and_set_bit(0, &timer_enabled)) + return -EBUSY; + + if (nowayout) + __module_get(THIS_MODULE); + + /* Reload and activate timer */ + wb_smsc_wdt_enable(); + + pr_info("Watchdog enabled. Timeout set to %d %s\n", + timeout, (unit == UNIT_SECOND) ? "second(s)" : "minute(s)"); + + return nonseekable_open(inode, file); +} + +/* close => shut off the timer */ + +static int wb_smsc_wdt_release(struct inode *inode, struct file *file) +{ + /* Shut off the timer. */ + + if (expect_close == 42) { + wb_smsc_wdt_disable(); + pr_info("Watchdog disabled, sleeping again...\n"); + } else { + pr_crit("Unexpected close, not stopping watchdog!\n"); + wb_smsc_wdt_reset_timer(); + } + + clear_bit(0, &timer_enabled); + expect_close = 0; + return 0; +} + +/* write => update the timer to keep the machine alive */ + +static ssize_t wb_smsc_wdt_write(struct file *file, const char __user *data, + size_t len, loff_t *ppos) +{ + /* See if we got the magic character 'V' and reload the timer */ + if (len) { + if (!nowayout) { + size_t i; + + /* reset expect flag */ + expect_close = 0; + + /* scan to see whether or not we got the + magic character */ + for (i = 0; i != len; i++) { + char c; + if (get_user(c, data + i)) + return -EFAULT; + if (c == 'V') + expect_close = 42; + } + } + + /* someone wrote to us, we should reload the timer */ + wb_smsc_wdt_reset_timer(); + } + return len; +} + +/* ioctl => control interface */ + +static long wb_smsc_wdt_ioctl(struct file *file, + unsigned int cmd, unsigned long arg) +{ + int new_timeout; + + union { + struct watchdog_info __user *ident; + int __user *i; + } uarg; + + static const struct watchdog_info ident = { + .options = WDIOF_KEEPALIVEPING | + WDIOF_SETTIMEOUT | + WDIOF_MAGICCLOSE, + .firmware_version = 0, + .identity = "SMsC 37B787 Watchdog", + }; + + uarg.i = (int __user *)arg; + + switch (cmd) { + case WDIOC_GETSUPPORT: + return copy_to_user(uarg.ident, &ident, sizeof(ident)) + ? -EFAULT : 0; + case WDIOC_GETSTATUS: + return put_user(wb_smsc_wdt_status(), uarg.i); + case WDIOC_GETBOOTSTATUS: + return put_user(0, uarg.i); + case WDIOC_SETOPTIONS: + { + int options, retval = -EINVAL; + + if (get_user(options, uarg.i)) + return -EFAULT; + + if (options & WDIOS_DISABLECARD) { + wb_smsc_wdt_disable(); + retval = 0; + } + if (options & WDIOS_ENABLECARD) { + wb_smsc_wdt_enable(); + retval = 0; + } + return retval; + } + case WDIOC_KEEPALIVE: + wb_smsc_wdt_reset_timer(); + return 0; + case WDIOC_SETTIMEOUT: + if (get_user(new_timeout, uarg.i)) + return -EFAULT; + /* the API states this is given in secs */ + if (unit == UNIT_MINUTE) + new_timeout /= 60; + if (new_timeout < 0 || new_timeout > MAX_TIMEOUT) + return -EINVAL; + timeout = new_timeout; + wb_smsc_wdt_set_timeout(timeout); + /* fall through and return the new timeout... */ + case WDIOC_GETTIMEOUT: + new_timeout = timeout; + if (unit == UNIT_MINUTE) + new_timeout *= 60; + return put_user(new_timeout, uarg.i); + default: + return -ENOTTY; + } +} + +/* -- Notifier funtions -----------------------------------------*/ + +static int wb_smsc_wdt_notify_sys(struct notifier_block *this, + unsigned long code, void *unused) +{ + if (code == SYS_DOWN || code == SYS_HALT) { + /* set timeout to 0, to avoid possible race-condition */ + timeout = 0; + wb_smsc_wdt_disable(); + } + return NOTIFY_DONE; +} + +/* -- Module's structures ---------------------------------------*/ + +static const struct file_operations wb_smsc_wdt_fops = { + .owner = THIS_MODULE, + .llseek = no_llseek, + .write = wb_smsc_wdt_write, + .unlocked_ioctl = wb_smsc_wdt_ioctl, + .open = wb_smsc_wdt_open, + .release = wb_smsc_wdt_release, +}; + +static struct notifier_block wb_smsc_wdt_notifier = { + .notifier_call = wb_smsc_wdt_notify_sys, +}; + +static struct miscdevice wb_smsc_wdt_miscdev = { + .minor = WATCHDOG_MINOR, + .name = "watchdog", + .fops = &wb_smsc_wdt_fops, +}; + +/* -- Module init functions -------------------------------------*/ + +/* module's "constructor" */ + +static int __init wb_smsc_wdt_init(void) +{ + int ret; + + pr_info("SMsC 37B787 watchdog component driver " + VERSION " initialising...\n"); + + if (!request_region(IOPORT, IOPORT_SIZE, "SMsC 37B787 watchdog")) { + pr_err("Unable to register IO port %#x\n", IOPORT); + ret = -EBUSY; + goto out_pnp; + } + + /* set new maximum, if it's too big */ + if (timeout > MAX_TIMEOUT) + timeout = MAX_TIMEOUT; + + /* init the watchdog timer */ + wb_smsc_wdt_initialize(); + + ret = register_reboot_notifier(&wb_smsc_wdt_notifier); + if (ret) { + pr_err("Unable to register reboot notifier err = %d\n", ret); + goto out_io; + } + + ret = misc_register(&wb_smsc_wdt_miscdev); + if (ret) { + pr_err("Unable to register miscdev on minor %d\n", + WATCHDOG_MINOR); + goto out_rbt; + } + + /* output info */ + pr_info("Timeout set to %d %s\n", + timeout, (unit == UNIT_SECOND) ? "second(s)" : "minute(s)"); + pr_info("Watchdog initialized and sleeping (nowayout=%d)...\n", + nowayout); +out_clean: + return ret; + +out_rbt: + unregister_reboot_notifier(&wb_smsc_wdt_notifier); + +out_io: + release_region(IOPORT, IOPORT_SIZE); + +out_pnp: + goto out_clean; +} + +/* module's "destructor" */ + +static void __exit wb_smsc_wdt_exit(void) +{ + /* Stop the timer before we leave */ + if (!nowayout) { + wb_smsc_wdt_shutdown(); + pr_info("Watchdog disabled\n"); + } + + misc_deregister(&wb_smsc_wdt_miscdev); + unregister_reboot_notifier(&wb_smsc_wdt_notifier); + release_region(IOPORT, IOPORT_SIZE); + + pr_info("SMsC 37B787 watchdog component driver removed\n"); +} + +module_init(wb_smsc_wdt_init); +module_exit(wb_smsc_wdt_exit); + +MODULE_AUTHOR("Sven Anders <anders@anduras.de>"); +MODULE_DESCRIPTION("Driver for SMsC 37B787 watchdog component (Version " + VERSION ")"); +MODULE_LICENSE("GPL"); + +#ifdef SMSC_SUPPORT_MINUTES +module_param(unit, int, 0); +MODULE_PARM_DESC(unit, + "set unit to use, 0=seconds or 1=minutes, default is 0"); +#endif + +module_param(timeout, int, 0); +MODULE_PARM_DESC(timeout, "range is 1-255 units, default is 60"); + +module_param(nowayout, bool, 0); +MODULE_PARM_DESC(nowayout, + "Watchdog cannot be stopped once started (default=" + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); diff --git a/drivers/watchdog/softdog.c b/drivers/watchdog/softdog.c new file mode 100644 index 000000000..060740625 --- /dev/null +++ b/drivers/watchdog/softdog.c @@ -0,0 +1,171 @@ +/* + * SoftDog: A Software Watchdog Device + * + * (c) Copyright 1996 Alan Cox <alan@lxorguk.ukuu.org.uk>, + * All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * Neither Alan Cox nor CymruNet Ltd. admit liability nor provide + * warranty for any of this software. This material is provided + * "AS-IS" and at no charge. + * + * (c) Copyright 1995 Alan Cox <alan@lxorguk.ukuu.org.uk> + * + * Software only watchdog driver. Unlike its big brother the WDT501P + * driver this won't always recover a failed machine. + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/hrtimer.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/reboot.h> +#include <linux/types.h> +#include <linux/watchdog.h> + +#define TIMER_MARGIN 60 /* Default is 60 seconds */ +static unsigned int soft_margin = TIMER_MARGIN; /* in seconds */ +module_param(soft_margin, uint, 0); +MODULE_PARM_DESC(soft_margin, + "Watchdog soft_margin in seconds. (0 < soft_margin < 65536, default=" + __MODULE_STRING(TIMER_MARGIN) ")"); + +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); +MODULE_PARM_DESC(nowayout, + "Watchdog cannot be stopped once started (default=" + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); + +static int soft_noboot; +module_param(soft_noboot, int, 0); +MODULE_PARM_DESC(soft_noboot, + "Softdog action, set to 1 to ignore reboots, 0 to reboot (default=0)"); + +static int soft_panic; +module_param(soft_panic, int, 0); +MODULE_PARM_DESC(soft_panic, + "Softdog action, set to 1 to panic, 0 to reboot (default=0)"); + +static struct hrtimer softdog_ticktock; +static struct hrtimer softdog_preticktock; + +static enum hrtimer_restart softdog_fire(struct hrtimer *timer) +{ + module_put(THIS_MODULE); + if (soft_noboot) { + pr_crit("Triggered - Reboot ignored\n"); + } else if (soft_panic) { + pr_crit("Initiating panic\n"); + panic("Software Watchdog Timer expired"); + } else { + pr_crit("Initiating system reboot\n"); + emergency_restart(); + pr_crit("Reboot didn't ?????\n"); + } + + return HRTIMER_NORESTART; +} + +static struct watchdog_device softdog_dev; + +static enum hrtimer_restart softdog_pretimeout(struct hrtimer *timer) +{ + watchdog_notify_pretimeout(&softdog_dev); + + return HRTIMER_NORESTART; +} + +static int softdog_ping(struct watchdog_device *w) +{ + if (!hrtimer_active(&softdog_ticktock)) + __module_get(THIS_MODULE); + hrtimer_start(&softdog_ticktock, ktime_set(w->timeout, 0), + HRTIMER_MODE_REL); + + if (IS_ENABLED(CONFIG_SOFT_WATCHDOG_PRETIMEOUT)) { + if (w->pretimeout) + hrtimer_start(&softdog_preticktock, + ktime_set(w->timeout - w->pretimeout, 0), + HRTIMER_MODE_REL); + else + hrtimer_cancel(&softdog_preticktock); + } + + return 0; +} + +static int softdog_stop(struct watchdog_device *w) +{ + if (hrtimer_cancel(&softdog_ticktock)) + module_put(THIS_MODULE); + + if (IS_ENABLED(CONFIG_SOFT_WATCHDOG_PRETIMEOUT)) + hrtimer_cancel(&softdog_preticktock); + + return 0; +} + +static struct watchdog_info softdog_info = { + .identity = "Software Watchdog", + .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE, +}; + +static const struct watchdog_ops softdog_ops = { + .owner = THIS_MODULE, + .start = softdog_ping, + .stop = softdog_stop, +}; + +static struct watchdog_device softdog_dev = { + .info = &softdog_info, + .ops = &softdog_ops, + .min_timeout = 1, + .max_timeout = 65535, + .timeout = TIMER_MARGIN, +}; + +static int __init softdog_init(void) +{ + int ret; + + watchdog_init_timeout(&softdog_dev, soft_margin, NULL); + watchdog_set_nowayout(&softdog_dev, nowayout); + watchdog_stop_on_reboot(&softdog_dev); + + hrtimer_init(&softdog_ticktock, CLOCK_MONOTONIC, HRTIMER_MODE_REL); + softdog_ticktock.function = softdog_fire; + + if (IS_ENABLED(CONFIG_SOFT_WATCHDOG_PRETIMEOUT)) { + softdog_info.options |= WDIOF_PRETIMEOUT; + hrtimer_init(&softdog_preticktock, CLOCK_MONOTONIC, + HRTIMER_MODE_REL); + softdog_preticktock.function = softdog_pretimeout; + } + + ret = watchdog_register_device(&softdog_dev); + if (ret) + return ret; + + pr_info("initialized. soft_noboot=%d soft_margin=%d sec soft_panic=%d (nowayout=%d)\n", + soft_noboot, softdog_dev.timeout, soft_panic, nowayout); + + return 0; +} +module_init(softdog_init); + +static void __exit softdog_exit(void) +{ + watchdog_unregister_device(&softdog_dev); +} +module_exit(softdog_exit); + +MODULE_AUTHOR("Alan Cox"); +MODULE_DESCRIPTION("Software Watchdog Device Driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/watchdog/sp5100_tco.c b/drivers/watchdog/sp5100_tco.c new file mode 100644 index 000000000..41aaae2d5 --- /dev/null +++ b/drivers/watchdog/sp5100_tco.c @@ -0,0 +1,496 @@ +/* + * sp5100_tco : TCO timer driver for sp5100 chipsets + * + * (c) Copyright 2009 Google Inc., All Rights Reserved. + * + * Based on i8xx_tco.c: + * (c) Copyright 2000 kernel concepts <nils@kernelconcepts.de>, All Rights + * Reserved. + * http://www.kernelconcepts.de + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * See AMD Publication 43009 "AMD SB700/710/750 Register Reference Guide", + * AMD Publication 45482 "AMD SB800-Series Southbridges Register + * Reference Guide" + * AMD Publication 48751 "BIOS and Kernel Developer’s Guide (BKDG) + * for AMD Family 16h Models 00h-0Fh Processors" + * AMD Publication 51192 "AMD Bolton FCH Register Reference Guide" + * AMD Publication 52740 "BIOS and Kernel Developer’s Guide (BKDG) + * for AMD Family 16h Models 30h-3Fh Processors" + */ + +/* + * Includes, defines, variables, module parameters, ... + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/init.h> +#include <linux/io.h> +#include <linux/ioport.h> +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/pci.h> +#include <linux/platform_device.h> +#include <linux/types.h> +#include <linux/watchdog.h> + +#include "sp5100_tco.h" + +#define TCO_DRIVER_NAME "sp5100-tco" + +/* internal variables */ + +enum tco_reg_layout { + sp5100, sb800, efch +}; + +struct sp5100_tco { + struct watchdog_device wdd; + void __iomem *tcobase; + enum tco_reg_layout tco_reg_layout; +}; + +/* the watchdog platform device */ +static struct platform_device *sp5100_tco_platform_device; +/* the associated PCI device */ +static struct pci_dev *sp5100_tco_pci; + +/* module parameters */ + +#define WATCHDOG_HEARTBEAT 60 /* 60 sec default heartbeat. */ +static int heartbeat = WATCHDOG_HEARTBEAT; /* in seconds */ +module_param(heartbeat, int, 0); +MODULE_PARM_DESC(heartbeat, "Watchdog heartbeat in seconds. (default=" + __MODULE_STRING(WATCHDOG_HEARTBEAT) ")"); + +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); +MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started." + " (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); + +/* + * Some TCO specific functions + */ + +static enum tco_reg_layout tco_reg_layout(struct pci_dev *dev) +{ + if (dev->vendor == PCI_VENDOR_ID_ATI && + dev->device == PCI_DEVICE_ID_ATI_SBX00_SMBUS && + dev->revision < 0x40) { + return sp5100; + } else if (dev->vendor == PCI_VENDOR_ID_AMD && + ((dev->device == PCI_DEVICE_ID_AMD_HUDSON2_SMBUS && + dev->revision >= 0x41) || + (dev->device == PCI_DEVICE_ID_AMD_KERNCZ_SMBUS && + dev->revision >= 0x49))) { + return efch; + } + return sb800; +} + +static int tco_timer_start(struct watchdog_device *wdd) +{ + struct sp5100_tco *tco = watchdog_get_drvdata(wdd); + u32 val; + + val = readl(SP5100_WDT_CONTROL(tco->tcobase)); + val |= SP5100_WDT_START_STOP_BIT; + writel(val, SP5100_WDT_CONTROL(tco->tcobase)); + + return 0; +} + +static int tco_timer_stop(struct watchdog_device *wdd) +{ + struct sp5100_tco *tco = watchdog_get_drvdata(wdd); + u32 val; + + val = readl(SP5100_WDT_CONTROL(tco->tcobase)); + val &= ~SP5100_WDT_START_STOP_BIT; + writel(val, SP5100_WDT_CONTROL(tco->tcobase)); + + return 0; +} + +static int tco_timer_ping(struct watchdog_device *wdd) +{ + struct sp5100_tco *tco = watchdog_get_drvdata(wdd); + u32 val; + + val = readl(SP5100_WDT_CONTROL(tco->tcobase)); + val |= SP5100_WDT_TRIGGER_BIT; + writel(val, SP5100_WDT_CONTROL(tco->tcobase)); + + return 0; +} + +static int tco_timer_set_timeout(struct watchdog_device *wdd, + unsigned int t) +{ + struct sp5100_tco *tco = watchdog_get_drvdata(wdd); + + /* Write new heartbeat to watchdog */ + writel(t, SP5100_WDT_COUNT(tco->tcobase)); + + wdd->timeout = t; + + return 0; +} + +static u8 sp5100_tco_read_pm_reg8(u8 index) +{ + outb(index, SP5100_IO_PM_INDEX_REG); + return inb(SP5100_IO_PM_DATA_REG); +} + +static void sp5100_tco_update_pm_reg8(u8 index, u8 reset, u8 set) +{ + u8 val; + + outb(index, SP5100_IO_PM_INDEX_REG); + val = inb(SP5100_IO_PM_DATA_REG); + val &= reset; + val |= set; + outb(val, SP5100_IO_PM_DATA_REG); +} + +static void tco_timer_enable(struct sp5100_tco *tco) +{ + u32 val; + + switch (tco->tco_reg_layout) { + case sb800: + /* For SB800 or later */ + /* Set the Watchdog timer resolution to 1 sec */ + sp5100_tco_update_pm_reg8(SB800_PM_WATCHDOG_CONFIG, + 0xff, SB800_PM_WATCHDOG_SECOND_RES); + + /* Enable watchdog decode bit and watchdog timer */ + sp5100_tco_update_pm_reg8(SB800_PM_WATCHDOG_CONTROL, + ~SB800_PM_WATCHDOG_DISABLE, + SB800_PCI_WATCHDOG_DECODE_EN); + break; + case sp5100: + /* For SP5100 or SB7x0 */ + /* Enable watchdog decode bit */ + pci_read_config_dword(sp5100_tco_pci, + SP5100_PCI_WATCHDOG_MISC_REG, + &val); + + val |= SP5100_PCI_WATCHDOG_DECODE_EN; + + pci_write_config_dword(sp5100_tco_pci, + SP5100_PCI_WATCHDOG_MISC_REG, + val); + + /* Enable Watchdog timer and set the resolution to 1 sec */ + sp5100_tco_update_pm_reg8(SP5100_PM_WATCHDOG_CONTROL, + ~SP5100_PM_WATCHDOG_DISABLE, + SP5100_PM_WATCHDOG_SECOND_RES); + break; + case efch: + /* Set the Watchdog timer resolution to 1 sec and enable */ + sp5100_tco_update_pm_reg8(EFCH_PM_DECODEEN3, + ~EFCH_PM_WATCHDOG_DISABLE, + EFCH_PM_DECODEEN_SECOND_RES); + break; + } +} + +static u32 sp5100_tco_read_pm_reg32(u8 index) +{ + u32 val = 0; + int i; + + for (i = 3; i >= 0; i--) + val = (val << 8) + sp5100_tco_read_pm_reg8(index + i); + + return val; +} + +static int sp5100_tco_setupdevice(struct device *dev, + struct watchdog_device *wdd) +{ + struct sp5100_tco *tco = watchdog_get_drvdata(wdd); + const char *dev_name; + u32 mmio_addr = 0, val; + int ret; + + /* Request the IO ports used by this driver */ + if (!request_muxed_region(SP5100_IO_PM_INDEX_REG, + SP5100_PM_IOPORTS_SIZE, "sp5100_tco")) { + dev_err(dev, "I/O address 0x%04x already in use\n", + SP5100_IO_PM_INDEX_REG); + return -EBUSY; + } + + /* + * Determine type of southbridge chipset. + */ + switch (tco->tco_reg_layout) { + case sp5100: + dev_name = SP5100_DEVNAME; + mmio_addr = sp5100_tco_read_pm_reg32(SP5100_PM_WATCHDOG_BASE) & + 0xfffffff8; + break; + case sb800: + dev_name = SB800_DEVNAME; + mmio_addr = sp5100_tco_read_pm_reg32(SB800_PM_WATCHDOG_BASE) & + 0xfffffff8; + break; + case efch: + dev_name = SB800_DEVNAME; + val = sp5100_tco_read_pm_reg8(EFCH_PM_DECODEEN); + if (val & EFCH_PM_DECODEEN_WDT_TMREN) + mmio_addr = EFCH_PM_WDT_ADDR; + break; + default: + return -ENODEV; + } + + /* Check MMIO address conflict */ + if (!mmio_addr || + !devm_request_mem_region(dev, mmio_addr, SP5100_WDT_MEM_MAP_SIZE, + dev_name)) { + if (mmio_addr) + dev_dbg(dev, "MMIO address 0x%08x already in use\n", + mmio_addr); + switch (tco->tco_reg_layout) { + case sp5100: + /* + * Secondly, Find the watchdog timer MMIO address + * from SBResource_MMIO register. + */ + /* Read SBResource_MMIO from PCI config(PCI_Reg: 9Ch) */ + pci_read_config_dword(sp5100_tco_pci, + SP5100_SB_RESOURCE_MMIO_BASE, + &mmio_addr); + if ((mmio_addr & (SB800_ACPI_MMIO_DECODE_EN | + SB800_ACPI_MMIO_SEL)) != + SB800_ACPI_MMIO_DECODE_EN) { + ret = -ENODEV; + goto unreg_region; + } + mmio_addr &= ~0xFFF; + mmio_addr += SB800_PM_WDT_MMIO_OFFSET; + break; + case sb800: + /* Read SBResource_MMIO from AcpiMmioEn(PM_Reg: 24h) */ + mmio_addr = + sp5100_tco_read_pm_reg32(SB800_PM_ACPI_MMIO_EN); + if ((mmio_addr & (SB800_ACPI_MMIO_DECODE_EN | + SB800_ACPI_MMIO_SEL)) != + SB800_ACPI_MMIO_DECODE_EN) { + ret = -ENODEV; + goto unreg_region; + } + mmio_addr &= ~0xFFF; + mmio_addr += SB800_PM_WDT_MMIO_OFFSET; + break; + case efch: + val = sp5100_tco_read_pm_reg8(EFCH_PM_ISACONTROL); + if (!(val & EFCH_PM_ISACONTROL_MMIOEN)) { + ret = -ENODEV; + goto unreg_region; + } + mmio_addr = EFCH_PM_ACPI_MMIO_ADDR + + EFCH_PM_ACPI_MMIO_WDT_OFFSET; + break; + } + dev_dbg(dev, "Got 0x%08x from SBResource_MMIO register\n", + mmio_addr); + if (!devm_request_mem_region(dev, mmio_addr, + SP5100_WDT_MEM_MAP_SIZE, + dev_name)) { + dev_dbg(dev, "MMIO address 0x%08x already in use\n", + mmio_addr); + ret = -EBUSY; + goto unreg_region; + } + } + + tco->tcobase = devm_ioremap(dev, mmio_addr, SP5100_WDT_MEM_MAP_SIZE); + if (!tco->tcobase) { + dev_err(dev, "failed to get tcobase address\n"); + ret = -ENOMEM; + goto unreg_region; + } + + dev_info(dev, "Using 0x%08x for watchdog MMIO address\n", mmio_addr); + + /* Setup the watchdog timer */ + tco_timer_enable(tco); + + val = readl(SP5100_WDT_CONTROL(tco->tcobase)); + if (val & SP5100_WDT_DISABLED) { + dev_err(dev, "Watchdog hardware is disabled\n"); + ret = -ENODEV; + goto unreg_region; + } + + /* + * Save WatchDogFired status, because WatchDogFired flag is + * cleared here. + */ + if (val & SP5100_WDT_FIRED) + wdd->bootstatus = WDIOF_CARDRESET; + /* Set watchdog action to reset the system */ + val &= ~SP5100_WDT_ACTION_RESET; + writel(val, SP5100_WDT_CONTROL(tco->tcobase)); + + /* Set a reasonable heartbeat before we stop the timer */ + tco_timer_set_timeout(wdd, wdd->timeout); + + /* + * Stop the TCO before we change anything so we don't race with + * a zeroed timer. + */ + tco_timer_stop(wdd); + + release_region(SP5100_IO_PM_INDEX_REG, SP5100_PM_IOPORTS_SIZE); + + return 0; + +unreg_region: + release_region(SP5100_IO_PM_INDEX_REG, SP5100_PM_IOPORTS_SIZE); + return ret; +} + +static struct watchdog_info sp5100_tco_wdt_info = { + .identity = "SP5100 TCO timer", + .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE, +}; + +static const struct watchdog_ops sp5100_tco_wdt_ops = { + .owner = THIS_MODULE, + .start = tco_timer_start, + .stop = tco_timer_stop, + .ping = tco_timer_ping, + .set_timeout = tco_timer_set_timeout, +}; + +static int sp5100_tco_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct watchdog_device *wdd; + struct sp5100_tco *tco; + int ret; + + tco = devm_kzalloc(dev, sizeof(*tco), GFP_KERNEL); + if (!tco) + return -ENOMEM; + + tco->tco_reg_layout = tco_reg_layout(sp5100_tco_pci); + + wdd = &tco->wdd; + wdd->parent = dev; + wdd->info = &sp5100_tco_wdt_info; + wdd->ops = &sp5100_tco_wdt_ops; + wdd->timeout = WATCHDOG_HEARTBEAT; + wdd->min_timeout = 1; + wdd->max_timeout = 0xffff; + + if (watchdog_init_timeout(wdd, heartbeat, NULL)) + dev_info(dev, "timeout value invalid, using %d\n", + wdd->timeout); + watchdog_set_nowayout(wdd, nowayout); + watchdog_stop_on_reboot(wdd); + watchdog_stop_on_unregister(wdd); + watchdog_set_drvdata(wdd, tco); + + ret = sp5100_tco_setupdevice(dev, wdd); + if (ret) + return ret; + + ret = devm_watchdog_register_device(dev, wdd); + if (ret) { + dev_err(dev, "cannot register watchdog device (err=%d)\n", ret); + return ret; + } + + /* Show module parameters */ + dev_info(dev, "initialized. heartbeat=%d sec (nowayout=%d)\n", + wdd->timeout, nowayout); + + return 0; +} + +static struct platform_driver sp5100_tco_driver = { + .probe = sp5100_tco_probe, + .driver = { + .name = TCO_DRIVER_NAME, + }, +}; + +/* + * Data for PCI driver interface + * + * This data only exists for exporting the supported + * PCI ids via MODULE_DEVICE_TABLE. We do not actually + * register a pci_driver, because someone else might + * want to register another driver on the same PCI id. + */ +static const struct pci_device_id sp5100_tco_pci_tbl[] = { + { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_SBX00_SMBUS, PCI_ANY_ID, + PCI_ANY_ID, }, + { PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_HUDSON2_SMBUS, PCI_ANY_ID, + PCI_ANY_ID, }, + { PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_KERNCZ_SMBUS, PCI_ANY_ID, + PCI_ANY_ID, }, + { 0, }, /* End of list */ +}; +MODULE_DEVICE_TABLE(pci, sp5100_tco_pci_tbl); + +static int __init sp5100_tco_init(void) +{ + struct pci_dev *dev = NULL; + int err; + + /* Match the PCI device */ + for_each_pci_dev(dev) { + if (pci_match_id(sp5100_tco_pci_tbl, dev) != NULL) { + sp5100_tco_pci = dev; + break; + } + } + + if (!sp5100_tco_pci) + return -ENODEV; + + pr_info("SP5100/SB800 TCO WatchDog Timer Driver\n"); + + err = platform_driver_register(&sp5100_tco_driver); + if (err) + return err; + + sp5100_tco_platform_device = + platform_device_register_simple(TCO_DRIVER_NAME, -1, NULL, 0); + if (IS_ERR(sp5100_tco_platform_device)) { + err = PTR_ERR(sp5100_tco_platform_device); + goto unreg_platform_driver; + } + + return 0; + +unreg_platform_driver: + platform_driver_unregister(&sp5100_tco_driver); + return err; +} + +static void __exit sp5100_tco_exit(void) +{ + platform_device_unregister(sp5100_tco_platform_device); + platform_driver_unregister(&sp5100_tco_driver); +} + +module_init(sp5100_tco_init); +module_exit(sp5100_tco_exit); + +MODULE_AUTHOR("Priyanka Gupta"); +MODULE_DESCRIPTION("TCO timer driver for SP5100/SB800 chipset"); +MODULE_LICENSE("GPL"); diff --git a/drivers/watchdog/sp5100_tco.h b/drivers/watchdog/sp5100_tco.h new file mode 100644 index 000000000..adf015aa4 --- /dev/null +++ b/drivers/watchdog/sp5100_tco.h @@ -0,0 +1,85 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * sp5100_tco: TCO timer driver for sp5100 chipsets. + * + * (c) Copyright 2009 Google Inc., All Rights Reserved. + * + * TCO timer driver for sp5100 chipsets + */ + +#include <linux/bitops.h> + +/* + * Some address definitions for the Watchdog + */ +#define SP5100_WDT_MEM_MAP_SIZE 0x08 +#define SP5100_WDT_CONTROL(base) ((base) + 0x00) /* Watchdog Control */ +#define SP5100_WDT_COUNT(base) ((base) + 0x04) /* Watchdog Count */ + +#define SP5100_WDT_START_STOP_BIT BIT(0) +#define SP5100_WDT_FIRED BIT(1) +#define SP5100_WDT_ACTION_RESET BIT(2) +#define SP5100_WDT_DISABLED BIT(3) +#define SP5100_WDT_TRIGGER_BIT BIT(7) + +#define SP5100_PM_IOPORTS_SIZE 0x02 + +/* + * These two IO registers are hardcoded and there doesn't seem to be a way to + * read them from a register. + */ + +/* For SP5100/SB7x0/SB8x0 chipset */ +#define SP5100_IO_PM_INDEX_REG 0xCD6 +#define SP5100_IO_PM_DATA_REG 0xCD7 + +/* For SP5100/SB7x0 chipset */ +#define SP5100_SB_RESOURCE_MMIO_BASE 0x9C + +#define SP5100_PM_WATCHDOG_CONTROL 0x69 +#define SP5100_PM_WATCHDOG_BASE 0x6C + +#define SP5100_PCI_WATCHDOG_MISC_REG 0x41 +#define SP5100_PCI_WATCHDOG_DECODE_EN BIT(3) + +#define SP5100_PM_WATCHDOG_DISABLE ((u8)BIT(0)) +#define SP5100_PM_WATCHDOG_SECOND_RES GENMASK(2, 1) + +#define SP5100_DEVNAME "SP5100 TCO" + +/* For SB8x0(or later) chipset */ +#define SB800_PM_ACPI_MMIO_EN 0x24 +#define SB800_PM_WATCHDOG_CONTROL 0x48 +#define SB800_PM_WATCHDOG_BASE 0x48 +#define SB800_PM_WATCHDOG_CONFIG 0x4C + +#define SB800_PCI_WATCHDOG_DECODE_EN BIT(0) +#define SB800_PM_WATCHDOG_DISABLE ((u8)BIT(1)) +#define SB800_PM_WATCHDOG_SECOND_RES GENMASK(1, 0) +#define SB800_ACPI_MMIO_DECODE_EN BIT(0) +#define SB800_ACPI_MMIO_SEL BIT(1) + +#define SB800_PM_WDT_MMIO_OFFSET 0xB00 + +#define SB800_DEVNAME "SB800 TCO" + +/* For recent chips with embedded FCH (rev 40+) */ + +#define EFCH_PM_DECODEEN 0x00 + +#define EFCH_PM_DECODEEN_WDT_TMREN BIT(7) + + +#define EFCH_PM_DECODEEN3 0x03 +#define EFCH_PM_DECODEEN_SECOND_RES GENMASK(1, 0) +#define EFCH_PM_WATCHDOG_DISABLE ((u8)GENMASK(3, 2)) + +/* WDT MMIO if enabled with PM00_DECODEEN_WDT_TMREN */ +#define EFCH_PM_WDT_ADDR 0xfeb00000 + +#define EFCH_PM_ISACONTROL 0x04 + +#define EFCH_PM_ISACONTROL_MMIOEN BIT(1) + +#define EFCH_PM_ACPI_MMIO_ADDR 0xfed80000 +#define EFCH_PM_ACPI_MMIO_WDT_OFFSET 0x00000b00 diff --git a/drivers/watchdog/sp805_wdt.c b/drivers/watchdog/sp805_wdt.c new file mode 100644 index 000000000..d8876fba6 --- /dev/null +++ b/drivers/watchdog/sp805_wdt.c @@ -0,0 +1,367 @@ +/* + * drivers/char/watchdog/sp805-wdt.c + * + * Watchdog driver for ARM SP805 watchdog module + * + * Copyright (C) 2010 ST Microelectronics + * Viresh Kumar <vireshk@kernel.org> + * + * This file is licensed under the terms of the GNU General Public + * License version 2 or later. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/acpi.h> +#include <linux/device.h> +#include <linux/resource.h> +#include <linux/amba/bus.h> +#include <linux/bitops.h> +#include <linux/clk.h> +#include <linux/io.h> +#include <linux/ioport.h> +#include <linux/kernel.h> +#include <linux/math64.h> +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/of.h> +#include <linux/pm.h> +#include <linux/slab.h> +#include <linux/spinlock.h> +#include <linux/types.h> +#include <linux/watchdog.h> + +/* default timeout in seconds */ +#define DEFAULT_TIMEOUT 60 + +#define MODULE_NAME "sp805-wdt" + +/* watchdog register offsets and masks */ +#define WDTLOAD 0x000 + #define LOAD_MIN 0x00000001 + #define LOAD_MAX 0xFFFFFFFF +#define WDTVALUE 0x004 +#define WDTCONTROL 0x008 + /* control register masks */ + #define INT_ENABLE (1 << 0) + #define RESET_ENABLE (1 << 1) + #define ENABLE_MASK (INT_ENABLE | RESET_ENABLE) +#define WDTINTCLR 0x00C +#define WDTRIS 0x010 +#define WDTMIS 0x014 + #define INT_MASK (1 << 0) +#define WDTLOCK 0xC00 + #define UNLOCK 0x1ACCE551 + #define LOCK 0x00000001 + +/** + * struct sp805_wdt: sp805 wdt device structure + * @wdd: instance of struct watchdog_device + * @lock: spin lock protecting dev structure and io access + * @base: base address of wdt + * @clk: clock structure of wdt + * @adev: amba device structure of wdt + * @status: current status of wdt + * @load_val: load value to be set for current timeout + */ +struct sp805_wdt { + struct watchdog_device wdd; + spinlock_t lock; + void __iomem *base; + struct clk *clk; + u64 rate; + struct amba_device *adev; + unsigned int load_val; +}; + +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); +MODULE_PARM_DESC(nowayout, + "Set to 1 to keep watchdog running after device release"); + +/* returns true if wdt is running; otherwise returns false */ +static bool wdt_is_running(struct watchdog_device *wdd) +{ + struct sp805_wdt *wdt = watchdog_get_drvdata(wdd); + u32 wdtcontrol = readl_relaxed(wdt->base + WDTCONTROL); + + return (wdtcontrol & ENABLE_MASK) == ENABLE_MASK; +} + +/* This routine finds load value that will reset system in required timout */ +static int wdt_setload(struct watchdog_device *wdd, unsigned int timeout) +{ + struct sp805_wdt *wdt = watchdog_get_drvdata(wdd); + u64 load, rate; + + rate = wdt->rate; + + /* + * sp805 runs counter with given value twice, after the end of first + * counter it gives an interrupt and then starts counter again. If + * interrupt already occurred then it resets the system. This is why + * load is half of what should be required. + */ + load = div_u64(rate, 2) * timeout - 1; + + load = (load > LOAD_MAX) ? LOAD_MAX : load; + load = (load < LOAD_MIN) ? LOAD_MIN : load; + + spin_lock(&wdt->lock); + wdt->load_val = load; + /* roundup timeout to closest positive integer value */ + wdd->timeout = div_u64((load + 1) * 2 + (rate / 2), rate); + spin_unlock(&wdt->lock); + + return 0; +} + +/* returns number of seconds left for reset to occur */ +static unsigned int wdt_timeleft(struct watchdog_device *wdd) +{ + struct sp805_wdt *wdt = watchdog_get_drvdata(wdd); + u64 load; + + spin_lock(&wdt->lock); + load = readl_relaxed(wdt->base + WDTVALUE); + + /*If the interrupt is inactive then time left is WDTValue + WDTLoad. */ + if (!(readl_relaxed(wdt->base + WDTRIS) & INT_MASK)) + load += wdt->load_val + 1; + spin_unlock(&wdt->lock); + + return div_u64(load, wdt->rate); +} + +static int +wdt_restart(struct watchdog_device *wdd, unsigned long mode, void *cmd) +{ + struct sp805_wdt *wdt = watchdog_get_drvdata(wdd); + + writel_relaxed(UNLOCK, wdt->base + WDTLOCK); + writel_relaxed(0, wdt->base + WDTCONTROL); + writel_relaxed(0, wdt->base + WDTLOAD); + writel_relaxed(INT_ENABLE | RESET_ENABLE, wdt->base + WDTCONTROL); + + /* Flush posted writes. */ + readl_relaxed(wdt->base + WDTLOCK); + + return 0; +} + +static int wdt_config(struct watchdog_device *wdd, bool ping) +{ + struct sp805_wdt *wdt = watchdog_get_drvdata(wdd); + int ret; + + if (!ping) { + + ret = clk_prepare_enable(wdt->clk); + if (ret) { + dev_err(&wdt->adev->dev, "clock enable fail"); + return ret; + } + } + + spin_lock(&wdt->lock); + + writel_relaxed(UNLOCK, wdt->base + WDTLOCK); + writel_relaxed(wdt->load_val, wdt->base + WDTLOAD); + writel_relaxed(INT_MASK, wdt->base + WDTINTCLR); + + if (!ping) + writel_relaxed(INT_ENABLE | RESET_ENABLE, wdt->base + + WDTCONTROL); + + writel_relaxed(LOCK, wdt->base + WDTLOCK); + + /* Flush posted writes. */ + readl_relaxed(wdt->base + WDTLOCK); + spin_unlock(&wdt->lock); + + return 0; +} + +static int wdt_ping(struct watchdog_device *wdd) +{ + return wdt_config(wdd, true); +} + +/* enables watchdog timers reset */ +static int wdt_enable(struct watchdog_device *wdd) +{ + return wdt_config(wdd, false); +} + +/* disables watchdog timers reset */ +static int wdt_disable(struct watchdog_device *wdd) +{ + struct sp805_wdt *wdt = watchdog_get_drvdata(wdd); + + spin_lock(&wdt->lock); + + writel_relaxed(UNLOCK, wdt->base + WDTLOCK); + writel_relaxed(0, wdt->base + WDTCONTROL); + writel_relaxed(LOCK, wdt->base + WDTLOCK); + + /* Flush posted writes. */ + readl_relaxed(wdt->base + WDTLOCK); + spin_unlock(&wdt->lock); + + clk_disable_unprepare(wdt->clk); + + return 0; +} + +static const struct watchdog_info wdt_info = { + .options = WDIOF_MAGICCLOSE | WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING, + .identity = MODULE_NAME, +}; + +static const struct watchdog_ops wdt_ops = { + .owner = THIS_MODULE, + .start = wdt_enable, + .stop = wdt_disable, + .ping = wdt_ping, + .set_timeout = wdt_setload, + .get_timeleft = wdt_timeleft, + .restart = wdt_restart, +}; + +static int +sp805_wdt_probe(struct amba_device *adev, const struct amba_id *id) +{ + struct sp805_wdt *wdt; + int ret = 0; + + wdt = devm_kzalloc(&adev->dev, sizeof(*wdt), GFP_KERNEL); + if (!wdt) { + ret = -ENOMEM; + goto err; + } + + wdt->base = devm_ioremap_resource(&adev->dev, &adev->res); + if (IS_ERR(wdt->base)) + return PTR_ERR(wdt->base); + + if (adev->dev.of_node) { + wdt->clk = devm_clk_get(&adev->dev, NULL); + if (IS_ERR(wdt->clk)) { + dev_err(&adev->dev, "Clock not found\n"); + return PTR_ERR(wdt->clk); + } + wdt->rate = clk_get_rate(wdt->clk); + } else if (has_acpi_companion(&adev->dev)) { + /* + * When Driver probe with ACPI device, clock devices + * are not available, so watchdog rate get from + * clock-frequency property given in _DSD object. + */ + device_property_read_u64(&adev->dev, "clock-frequency", + &wdt->rate); + if (!wdt->rate) { + dev_err(&adev->dev, "no clock-frequency property\n"); + return -ENODEV; + } + } + + wdt->adev = adev; + wdt->wdd.info = &wdt_info; + wdt->wdd.ops = &wdt_ops; + wdt->wdd.parent = &adev->dev; + + spin_lock_init(&wdt->lock); + watchdog_set_nowayout(&wdt->wdd, nowayout); + watchdog_set_drvdata(&wdt->wdd, wdt); + watchdog_set_restart_priority(&wdt->wdd, 128); + + /* + * If 'timeout-sec' devicetree property is specified, use that. + * Otherwise, use DEFAULT_TIMEOUT + */ + wdt->wdd.timeout = DEFAULT_TIMEOUT; + watchdog_init_timeout(&wdt->wdd, 0, &adev->dev); + wdt_setload(&wdt->wdd, wdt->wdd.timeout); + + /* + * If HW is already running, enable/reset the wdt and set the running + * bit to tell the wdt subsystem + */ + if (wdt_is_running(&wdt->wdd)) { + wdt_enable(&wdt->wdd); + set_bit(WDOG_HW_RUNNING, &wdt->wdd.status); + } + + ret = watchdog_register_device(&wdt->wdd); + if (ret) { + dev_err(&adev->dev, "watchdog_register_device() failed: %d\n", + ret); + goto err; + } + amba_set_drvdata(adev, wdt); + + dev_info(&adev->dev, "registration successful\n"); + return 0; + +err: + dev_err(&adev->dev, "Probe Failed!!!\n"); + return ret; +} + +static int sp805_wdt_remove(struct amba_device *adev) +{ + struct sp805_wdt *wdt = amba_get_drvdata(adev); + + watchdog_unregister_device(&wdt->wdd); + watchdog_set_drvdata(&wdt->wdd, NULL); + + return 0; +} + +static int __maybe_unused sp805_wdt_suspend(struct device *dev) +{ + struct sp805_wdt *wdt = dev_get_drvdata(dev); + + if (watchdog_active(&wdt->wdd)) + return wdt_disable(&wdt->wdd); + + return 0; +} + +static int __maybe_unused sp805_wdt_resume(struct device *dev) +{ + struct sp805_wdt *wdt = dev_get_drvdata(dev); + + if (watchdog_active(&wdt->wdd)) + return wdt_enable(&wdt->wdd); + + return 0; +} + +static SIMPLE_DEV_PM_OPS(sp805_wdt_dev_pm_ops, sp805_wdt_suspend, + sp805_wdt_resume); + +static const struct amba_id sp805_wdt_ids[] = { + { + .id = 0x00141805, + .mask = 0x00ffffff, + }, + { 0, 0 }, +}; + +MODULE_DEVICE_TABLE(amba, sp805_wdt_ids); + +static struct amba_driver sp805_wdt_driver = { + .drv = { + .name = MODULE_NAME, + .pm = &sp805_wdt_dev_pm_ops, + }, + .id_table = sp805_wdt_ids, + .probe = sp805_wdt_probe, + .remove = sp805_wdt_remove, +}; + +module_amba_driver(sp805_wdt_driver); + +MODULE_AUTHOR("Viresh Kumar <vireshk@kernel.org>"); +MODULE_DESCRIPTION("ARM SP805 Watchdog Driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/watchdog/sprd_wdt.c b/drivers/watchdog/sprd_wdt.c new file mode 100644 index 000000000..86cf93af9 --- /dev/null +++ b/drivers/watchdog/sprd_wdt.c @@ -0,0 +1,393 @@ +/* + * Spreadtrum watchdog driver + * Copyright (C) 2017 Spreadtrum - http://www.spreadtrum.com + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + */ + +#include <linux/bitops.h> +#include <linux/clk.h> +#include <linux/device.h> +#include <linux/err.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/platform_device.h> +#include <linux/watchdog.h> + +#define SPRD_WDT_LOAD_LOW 0x0 +#define SPRD_WDT_LOAD_HIGH 0x4 +#define SPRD_WDT_CTRL 0x8 +#define SPRD_WDT_INT_CLR 0xc +#define SPRD_WDT_INT_RAW 0x10 +#define SPRD_WDT_INT_MSK 0x14 +#define SPRD_WDT_CNT_LOW 0x18 +#define SPRD_WDT_CNT_HIGH 0x1c +#define SPRD_WDT_LOCK 0x20 +#define SPRD_WDT_IRQ_LOAD_LOW 0x2c +#define SPRD_WDT_IRQ_LOAD_HIGH 0x30 + +/* WDT_CTRL */ +#define SPRD_WDT_INT_EN_BIT BIT(0) +#define SPRD_WDT_CNT_EN_BIT BIT(1) +#define SPRD_WDT_NEW_VER_EN BIT(2) +#define SPRD_WDT_RST_EN_BIT BIT(3) + +/* WDT_INT_CLR */ +#define SPRD_WDT_INT_CLEAR_BIT BIT(0) +#define SPRD_WDT_RST_CLEAR_BIT BIT(3) + +/* WDT_INT_RAW */ +#define SPRD_WDT_INT_RAW_BIT BIT(0) +#define SPRD_WDT_RST_RAW_BIT BIT(3) +#define SPRD_WDT_LD_BUSY_BIT BIT(4) + +/* 1s equal to 32768 counter steps */ +#define SPRD_WDT_CNT_STEP 32768 + +#define SPRD_WDT_UNLOCK_KEY 0xe551 +#define SPRD_WDT_MIN_TIMEOUT 3 +#define SPRD_WDT_MAX_TIMEOUT 60 + +#define SPRD_WDT_CNT_HIGH_SHIFT 16 +#define SPRD_WDT_LOW_VALUE_MASK GENMASK(15, 0) +#define SPRD_WDT_LOAD_TIMEOUT 1000 + +struct sprd_wdt { + void __iomem *base; + struct watchdog_device wdd; + struct clk *enable; + struct clk *rtc_enable; + int irq; +}; + +static inline struct sprd_wdt *to_sprd_wdt(struct watchdog_device *wdd) +{ + return container_of(wdd, struct sprd_wdt, wdd); +} + +static inline void sprd_wdt_lock(void __iomem *addr) +{ + writel_relaxed(0x0, addr + SPRD_WDT_LOCK); +} + +static inline void sprd_wdt_unlock(void __iomem *addr) +{ + writel_relaxed(SPRD_WDT_UNLOCK_KEY, addr + SPRD_WDT_LOCK); +} + +static irqreturn_t sprd_wdt_isr(int irq, void *dev_id) +{ + struct sprd_wdt *wdt = (struct sprd_wdt *)dev_id; + + sprd_wdt_unlock(wdt->base); + writel_relaxed(SPRD_WDT_INT_CLEAR_BIT, wdt->base + SPRD_WDT_INT_CLR); + sprd_wdt_lock(wdt->base); + watchdog_notify_pretimeout(&wdt->wdd); + return IRQ_HANDLED; +} + +static u32 sprd_wdt_get_cnt_value(struct sprd_wdt *wdt) +{ + u32 val; + + val = readl_relaxed(wdt->base + SPRD_WDT_CNT_HIGH) << + SPRD_WDT_CNT_HIGH_SHIFT; + val |= readl_relaxed(wdt->base + SPRD_WDT_CNT_LOW) & + SPRD_WDT_LOW_VALUE_MASK; + + return val; +} + +static int sprd_wdt_load_value(struct sprd_wdt *wdt, u32 timeout, + u32 pretimeout) +{ + u32 val, delay_cnt = 0; + u32 tmr_step = timeout * SPRD_WDT_CNT_STEP; + u32 prtmr_step = pretimeout * SPRD_WDT_CNT_STEP; + + /* + * Waiting the load value operation done, + * it needs two or three RTC clock cycles. + */ + do { + val = readl_relaxed(wdt->base + SPRD_WDT_INT_RAW); + if (!(val & SPRD_WDT_LD_BUSY_BIT)) + break; + + cpu_relax(); + } while (delay_cnt++ < SPRD_WDT_LOAD_TIMEOUT); + + if (delay_cnt >= SPRD_WDT_LOAD_TIMEOUT) + return -EBUSY; + + sprd_wdt_unlock(wdt->base); + writel_relaxed((tmr_step >> SPRD_WDT_CNT_HIGH_SHIFT) & + SPRD_WDT_LOW_VALUE_MASK, wdt->base + SPRD_WDT_LOAD_HIGH); + writel_relaxed((tmr_step & SPRD_WDT_LOW_VALUE_MASK), + wdt->base + SPRD_WDT_LOAD_LOW); + writel_relaxed((prtmr_step >> SPRD_WDT_CNT_HIGH_SHIFT) & + SPRD_WDT_LOW_VALUE_MASK, + wdt->base + SPRD_WDT_IRQ_LOAD_HIGH); + writel_relaxed(prtmr_step & SPRD_WDT_LOW_VALUE_MASK, + wdt->base + SPRD_WDT_IRQ_LOAD_LOW); + sprd_wdt_lock(wdt->base); + + return 0; +} + +static int sprd_wdt_enable(struct sprd_wdt *wdt) +{ + u32 val; + int ret; + + ret = clk_prepare_enable(wdt->enable); + if (ret) + return ret; + ret = clk_prepare_enable(wdt->rtc_enable); + if (ret) { + clk_disable_unprepare(wdt->enable); + return ret; + } + + sprd_wdt_unlock(wdt->base); + val = readl_relaxed(wdt->base + SPRD_WDT_CTRL); + val |= SPRD_WDT_NEW_VER_EN; + writel_relaxed(val, wdt->base + SPRD_WDT_CTRL); + sprd_wdt_lock(wdt->base); + return 0; +} + +static void sprd_wdt_disable(void *_data) +{ + struct sprd_wdt *wdt = _data; + + sprd_wdt_unlock(wdt->base); + writel_relaxed(0x0, wdt->base + SPRD_WDT_CTRL); + sprd_wdt_lock(wdt->base); + + clk_disable_unprepare(wdt->rtc_enable); + clk_disable_unprepare(wdt->enable); +} + +static int sprd_wdt_start(struct watchdog_device *wdd) +{ + struct sprd_wdt *wdt = to_sprd_wdt(wdd); + u32 val; + int ret; + + ret = sprd_wdt_load_value(wdt, wdd->timeout, wdd->pretimeout); + if (ret) + return ret; + + sprd_wdt_unlock(wdt->base); + val = readl_relaxed(wdt->base + SPRD_WDT_CTRL); + val |= SPRD_WDT_CNT_EN_BIT | SPRD_WDT_INT_EN_BIT | SPRD_WDT_RST_EN_BIT; + writel_relaxed(val, wdt->base + SPRD_WDT_CTRL); + sprd_wdt_lock(wdt->base); + set_bit(WDOG_HW_RUNNING, &wdd->status); + + return 0; +} + +static int sprd_wdt_stop(struct watchdog_device *wdd) +{ + struct sprd_wdt *wdt = to_sprd_wdt(wdd); + u32 val; + + sprd_wdt_unlock(wdt->base); + val = readl_relaxed(wdt->base + SPRD_WDT_CTRL); + val &= ~(SPRD_WDT_CNT_EN_BIT | SPRD_WDT_RST_EN_BIT | + SPRD_WDT_INT_EN_BIT); + writel_relaxed(val, wdt->base + SPRD_WDT_CTRL); + sprd_wdt_lock(wdt->base); + return 0; +} + +static int sprd_wdt_set_timeout(struct watchdog_device *wdd, + u32 timeout) +{ + struct sprd_wdt *wdt = to_sprd_wdt(wdd); + + if (timeout == wdd->timeout) + return 0; + + wdd->timeout = timeout; + + return sprd_wdt_load_value(wdt, timeout, wdd->pretimeout); +} + +static int sprd_wdt_set_pretimeout(struct watchdog_device *wdd, + u32 new_pretimeout) +{ + struct sprd_wdt *wdt = to_sprd_wdt(wdd); + + if (new_pretimeout < wdd->min_timeout) + return -EINVAL; + + wdd->pretimeout = new_pretimeout; + + return sprd_wdt_load_value(wdt, wdd->timeout, new_pretimeout); +} + +static u32 sprd_wdt_get_timeleft(struct watchdog_device *wdd) +{ + struct sprd_wdt *wdt = to_sprd_wdt(wdd); + u32 val; + + val = sprd_wdt_get_cnt_value(wdt); + val = val / SPRD_WDT_CNT_STEP; + + return val; +} + +static const struct watchdog_ops sprd_wdt_ops = { + .owner = THIS_MODULE, + .start = sprd_wdt_start, + .stop = sprd_wdt_stop, + .set_timeout = sprd_wdt_set_timeout, + .set_pretimeout = sprd_wdt_set_pretimeout, + .get_timeleft = sprd_wdt_get_timeleft, +}; + +static const struct watchdog_info sprd_wdt_info = { + .options = WDIOF_SETTIMEOUT | + WDIOF_PRETIMEOUT | + WDIOF_MAGICCLOSE | + WDIOF_KEEPALIVEPING, + .identity = "Spreadtrum Watchdog Timer", +}; + +static int sprd_wdt_probe(struct platform_device *pdev) +{ + struct resource *wdt_res; + struct sprd_wdt *wdt; + int ret; + + wdt = devm_kzalloc(&pdev->dev, sizeof(*wdt), GFP_KERNEL); + if (!wdt) + return -ENOMEM; + + wdt_res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + wdt->base = devm_ioremap_resource(&pdev->dev, wdt_res); + if (IS_ERR(wdt->base)) + return PTR_ERR(wdt->base); + + wdt->enable = devm_clk_get(&pdev->dev, "enable"); + if (IS_ERR(wdt->enable)) { + dev_err(&pdev->dev, "can't get the enable clock\n"); + return PTR_ERR(wdt->enable); + } + + wdt->rtc_enable = devm_clk_get(&pdev->dev, "rtc_enable"); + if (IS_ERR(wdt->rtc_enable)) { + dev_err(&pdev->dev, "can't get the rtc enable clock\n"); + return PTR_ERR(wdt->rtc_enable); + } + + wdt->irq = platform_get_irq(pdev, 0); + if (wdt->irq < 0) { + dev_err(&pdev->dev, "failed to get IRQ resource\n"); + return wdt->irq; + } + + ret = devm_request_irq(&pdev->dev, wdt->irq, sprd_wdt_isr, + IRQF_NO_SUSPEND, "sprd-wdt", (void *)wdt); + if (ret) { + dev_err(&pdev->dev, "failed to register irq\n"); + return ret; + } + + wdt->wdd.info = &sprd_wdt_info; + wdt->wdd.ops = &sprd_wdt_ops; + wdt->wdd.parent = &pdev->dev; + wdt->wdd.min_timeout = SPRD_WDT_MIN_TIMEOUT; + wdt->wdd.max_timeout = SPRD_WDT_MAX_TIMEOUT; + wdt->wdd.timeout = SPRD_WDT_MAX_TIMEOUT; + + ret = sprd_wdt_enable(wdt); + if (ret) { + dev_err(&pdev->dev, "failed to enable wdt\n"); + return ret; + } + ret = devm_add_action(&pdev->dev, sprd_wdt_disable, wdt); + if (ret) { + sprd_wdt_disable(wdt); + dev_err(&pdev->dev, "Failed to add wdt disable action\n"); + return ret; + } + + watchdog_set_nowayout(&wdt->wdd, WATCHDOG_NOWAYOUT); + watchdog_init_timeout(&wdt->wdd, 0, &pdev->dev); + + ret = devm_watchdog_register_device(&pdev->dev, &wdt->wdd); + if (ret) { + sprd_wdt_disable(wdt); + dev_err(&pdev->dev, "failed to register watchdog\n"); + return ret; + } + platform_set_drvdata(pdev, wdt); + + return 0; +} + +static int __maybe_unused sprd_wdt_pm_suspend(struct device *dev) +{ + struct sprd_wdt *wdt = dev_get_drvdata(dev); + + if (watchdog_active(&wdt->wdd)) + sprd_wdt_stop(&wdt->wdd); + sprd_wdt_disable(wdt); + + return 0; +} + +static int __maybe_unused sprd_wdt_pm_resume(struct device *dev) +{ + struct sprd_wdt *wdt = dev_get_drvdata(dev); + int ret; + + ret = sprd_wdt_enable(wdt); + if (ret) + return ret; + + if (watchdog_active(&wdt->wdd)) + ret = sprd_wdt_start(&wdt->wdd); + + return ret; +} + +static const struct dev_pm_ops sprd_wdt_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(sprd_wdt_pm_suspend, + sprd_wdt_pm_resume) +}; + +static const struct of_device_id sprd_wdt_match_table[] = { + { .compatible = "sprd,sp9860-wdt", }, + {}, +}; +MODULE_DEVICE_TABLE(of, sprd_wdt_match_table); + +static struct platform_driver sprd_watchdog_driver = { + .probe = sprd_wdt_probe, + .driver = { + .name = "sprd-wdt", + .of_match_table = sprd_wdt_match_table, + .pm = &sprd_wdt_pm_ops, + }, +}; +module_platform_driver(sprd_watchdog_driver); + +MODULE_AUTHOR("Eric Long <eric.long@spreadtrum.com>"); +MODULE_DESCRIPTION("Spreadtrum Watchdog Timer Controller Driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/watchdog/st_lpc_wdt.c b/drivers/watchdog/st_lpc_wdt.c new file mode 100644 index 000000000..177829b37 --- /dev/null +++ b/drivers/watchdog/st_lpc_wdt.c @@ -0,0 +1,308 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * ST's LPC Watchdog + * + * Copyright (C) 2014 STMicroelectronics -- All Rights Reserved + * + * Author: David Paris <david.paris@st.com> for STMicroelectronics + * Lee Jones <lee.jones@linaro.org> for STMicroelectronics + */ + +#include <linux/clk.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/mfd/syscon.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_platform.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> +#include <linux/watchdog.h> + +#include <dt-bindings/mfd/st-lpc.h> + +/* Low Power Alarm */ +#define LPC_LPA_LSB_OFF 0x410 +#define LPC_LPA_START_OFF 0x418 + +/* LPC as WDT */ +#define LPC_WDT_OFF 0x510 + +static struct watchdog_device st_wdog_dev; + +struct st_wdog_syscfg { + unsigned int reset_type_reg; + unsigned int reset_type_mask; + unsigned int enable_reg; + unsigned int enable_mask; +}; + +struct st_wdog { + void __iomem *base; + struct device *dev; + struct regmap *regmap; + struct st_wdog_syscfg *syscfg; + struct clk *clk; + unsigned long clkrate; + bool warm_reset; +}; + +static struct st_wdog_syscfg stih407_syscfg = { + .enable_reg = 0x204, + .enable_mask = BIT(19), +}; + +static const struct of_device_id st_wdog_match[] = { + { + .compatible = "st,stih407-lpc", + .data = &stih407_syscfg, + }, + {}, +}; +MODULE_DEVICE_TABLE(of, st_wdog_match); + +static void st_wdog_setup(struct st_wdog *st_wdog, bool enable) +{ + /* Type of watchdog reset - 0: Cold 1: Warm */ + if (st_wdog->syscfg->reset_type_reg) + regmap_update_bits(st_wdog->regmap, + st_wdog->syscfg->reset_type_reg, + st_wdog->syscfg->reset_type_mask, + st_wdog->warm_reset); + + /* Mask/unmask watchdog reset */ + regmap_update_bits(st_wdog->regmap, + st_wdog->syscfg->enable_reg, + st_wdog->syscfg->enable_mask, + enable ? 0 : st_wdog->syscfg->enable_mask); +} + +static void st_wdog_load_timer(struct st_wdog *st_wdog, unsigned int timeout) +{ + unsigned long clkrate = st_wdog->clkrate; + + writel_relaxed(timeout * clkrate, st_wdog->base + LPC_LPA_LSB_OFF); + writel_relaxed(1, st_wdog->base + LPC_LPA_START_OFF); +} + +static int st_wdog_start(struct watchdog_device *wdd) +{ + struct st_wdog *st_wdog = watchdog_get_drvdata(wdd); + + writel_relaxed(1, st_wdog->base + LPC_WDT_OFF); + + return 0; +} + +static int st_wdog_stop(struct watchdog_device *wdd) +{ + struct st_wdog *st_wdog = watchdog_get_drvdata(wdd); + + writel_relaxed(0, st_wdog->base + LPC_WDT_OFF); + + return 0; +} + +static int st_wdog_set_timeout(struct watchdog_device *wdd, + unsigned int timeout) +{ + struct st_wdog *st_wdog = watchdog_get_drvdata(wdd); + + wdd->timeout = timeout; + st_wdog_load_timer(st_wdog, timeout); + + return 0; +} + +static int st_wdog_keepalive(struct watchdog_device *wdd) +{ + struct st_wdog *st_wdog = watchdog_get_drvdata(wdd); + + st_wdog_load_timer(st_wdog, wdd->timeout); + + return 0; +} + +static const struct watchdog_info st_wdog_info = { + .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE, + .identity = "ST LPC WDT", +}; + +static const struct watchdog_ops st_wdog_ops = { + .owner = THIS_MODULE, + .start = st_wdog_start, + .stop = st_wdog_stop, + .ping = st_wdog_keepalive, + .set_timeout = st_wdog_set_timeout, +}; + +static struct watchdog_device st_wdog_dev = { + .info = &st_wdog_info, + .ops = &st_wdog_ops, +}; + +static int st_wdog_probe(struct platform_device *pdev) +{ + const struct of_device_id *match; + struct device_node *np = pdev->dev.of_node; + struct st_wdog *st_wdog; + struct regmap *regmap; + struct resource *res; + struct clk *clk; + void __iomem *base; + uint32_t mode; + int ret; + + ret = of_property_read_u32(np, "st,lpc-mode", &mode); + if (ret) { + dev_err(&pdev->dev, "An LPC mode must be provided\n"); + return -EINVAL; + } + + /* LPC can either run as a Clocksource or in RTC or WDT mode */ + if (mode != ST_LPC_MODE_WDT) + return -ENODEV; + + st_wdog = devm_kzalloc(&pdev->dev, sizeof(*st_wdog), GFP_KERNEL); + if (!st_wdog) + return -ENOMEM; + + match = of_match_device(st_wdog_match, &pdev->dev); + if (!match) { + dev_err(&pdev->dev, "Couldn't match device\n"); + return -ENODEV; + } + st_wdog->syscfg = (struct st_wdog_syscfg *)match->data; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(base)) + return PTR_ERR(base); + + regmap = syscon_regmap_lookup_by_phandle(np, "st,syscfg"); + if (IS_ERR(regmap)) { + dev_err(&pdev->dev, "No syscfg phandle specified\n"); + return PTR_ERR(regmap); + } + + clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(clk)) { + dev_err(&pdev->dev, "Unable to request clock\n"); + return PTR_ERR(clk); + } + + st_wdog->dev = &pdev->dev; + st_wdog->base = base; + st_wdog->clk = clk; + st_wdog->regmap = regmap; + st_wdog->warm_reset = of_property_read_bool(np, "st,warm_reset"); + st_wdog->clkrate = clk_get_rate(st_wdog->clk); + + if (!st_wdog->clkrate) { + dev_err(&pdev->dev, "Unable to fetch clock rate\n"); + return -EINVAL; + } + st_wdog_dev.max_timeout = 0xFFFFFFFF / st_wdog->clkrate; + st_wdog_dev.parent = &pdev->dev; + + ret = clk_prepare_enable(clk); + if (ret) { + dev_err(&pdev->dev, "Unable to enable clock\n"); + return ret; + } + + watchdog_set_drvdata(&st_wdog_dev, st_wdog); + watchdog_set_nowayout(&st_wdog_dev, WATCHDOG_NOWAYOUT); + + /* Init Watchdog timeout with value in DT */ + ret = watchdog_init_timeout(&st_wdog_dev, 0, &pdev->dev); + if (ret) { + dev_err(&pdev->dev, "Unable to initialise watchdog timeout\n"); + clk_disable_unprepare(clk); + return ret; + } + + ret = watchdog_register_device(&st_wdog_dev); + if (ret) { + dev_err(&pdev->dev, "Unable to register watchdog\n"); + clk_disable_unprepare(clk); + return ret; + } + + st_wdog_setup(st_wdog, true); + + dev_info(&pdev->dev, "LPC Watchdog driver registered, reset type is %s", + st_wdog->warm_reset ? "warm" : "cold"); + + return ret; +} + +static int st_wdog_remove(struct platform_device *pdev) +{ + struct st_wdog *st_wdog = watchdog_get_drvdata(&st_wdog_dev); + + st_wdog_setup(st_wdog, false); + watchdog_unregister_device(&st_wdog_dev); + clk_disable_unprepare(st_wdog->clk); + + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int st_wdog_suspend(struct device *dev) +{ + struct st_wdog *st_wdog = watchdog_get_drvdata(&st_wdog_dev); + + if (watchdog_active(&st_wdog_dev)) + st_wdog_stop(&st_wdog_dev); + + st_wdog_setup(st_wdog, false); + + clk_disable(st_wdog->clk); + + return 0; +} + +static int st_wdog_resume(struct device *dev) +{ + struct st_wdog *st_wdog = watchdog_get_drvdata(&st_wdog_dev); + int ret; + + ret = clk_enable(st_wdog->clk); + if (ret) { + dev_err(dev, "Unable to re-enable clock\n"); + watchdog_unregister_device(&st_wdog_dev); + clk_unprepare(st_wdog->clk); + return ret; + } + + st_wdog_setup(st_wdog, true); + + if (watchdog_active(&st_wdog_dev)) { + st_wdog_load_timer(st_wdog, st_wdog_dev.timeout); + st_wdog_start(&st_wdog_dev); + } + + return 0; +} +#endif + +static SIMPLE_DEV_PM_OPS(st_wdog_pm_ops, + st_wdog_suspend, + st_wdog_resume); + +static struct platform_driver st_wdog_driver = { + .driver = { + .name = "st-lpc-wdt", + .pm = &st_wdog_pm_ops, + .of_match_table = st_wdog_match, + }, + .probe = st_wdog_probe, + .remove = st_wdog_remove, +}; +module_platform_driver(st_wdog_driver); + +MODULE_AUTHOR("David Paris <david.paris@st.com>"); +MODULE_DESCRIPTION("ST LPC Watchdog Driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/watchdog/stm32_iwdg.c b/drivers/watchdog/stm32_iwdg.c new file mode 100644 index 000000000..e00e3b352 --- /dev/null +++ b/drivers/watchdog/stm32_iwdg.c @@ -0,0 +1,285 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Driver for STM32 Independent Watchdog + * + * Copyright (C) STMicroelectronics 2017 + * Author: Yannick Fertre <yannick.fertre@st.com> for STMicroelectronics. + * + * This driver is based on tegra_wdt.c + * + */ + +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/iopoll.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/platform_device.h> +#include <linux/watchdog.h> + +/* IWDG registers */ +#define IWDG_KR 0x00 /* Key register */ +#define IWDG_PR 0x04 /* Prescaler Register */ +#define IWDG_RLR 0x08 /* ReLoad Register */ +#define IWDG_SR 0x0C /* Status Register */ +#define IWDG_WINR 0x10 /* Windows Register */ + +/* IWDG_KR register bit mask */ +#define KR_KEY_RELOAD 0xAAAA /* reload counter enable */ +#define KR_KEY_ENABLE 0xCCCC /* peripheral enable */ +#define KR_KEY_EWA 0x5555 /* write access enable */ +#define KR_KEY_DWA 0x0000 /* write access disable */ + +/* IWDG_PR register bit values */ +#define PR_4 0x00 /* prescaler set to 4 */ +#define PR_8 0x01 /* prescaler set to 8 */ +#define PR_16 0x02 /* prescaler set to 16 */ +#define PR_32 0x03 /* prescaler set to 32 */ +#define PR_64 0x04 /* prescaler set to 64 */ +#define PR_128 0x05 /* prescaler set to 128 */ +#define PR_256 0x06 /* prescaler set to 256 */ + +/* IWDG_RLR register values */ +#define RLR_MIN 0x07C /* min value supported by reload register */ +#define RLR_MAX 0xFFF /* max value supported by reload register */ + +/* IWDG_SR register bit mask */ +#define FLAG_PVU BIT(0) /* Watchdog prescaler value update */ +#define FLAG_RVU BIT(1) /* Watchdog counter reload value update */ + +/* set timeout to 100000 us */ +#define TIMEOUT_US 100000 +#define SLEEP_US 1000 + +#define HAS_PCLK true + +struct stm32_iwdg { + struct watchdog_device wdd; + void __iomem *regs; + struct clk *clk_lsi; + struct clk *clk_pclk; + unsigned int rate; + bool has_pclk; +}; + +static inline u32 reg_read(void __iomem *base, u32 reg) +{ + return readl_relaxed(base + reg); +} + +static inline void reg_write(void __iomem *base, u32 reg, u32 val) +{ + writel_relaxed(val, base + reg); +} + +static int stm32_iwdg_start(struct watchdog_device *wdd) +{ + struct stm32_iwdg *wdt = watchdog_get_drvdata(wdd); + u32 val = FLAG_PVU | FLAG_RVU; + u32 reload; + int ret; + + dev_dbg(wdd->parent, "%s\n", __func__); + + /* prescaler fixed to 256 */ + reload = clamp_t(unsigned int, ((wdd->timeout * wdt->rate) / 256) - 1, + RLR_MIN, RLR_MAX); + + /* enable write access */ + reg_write(wdt->regs, IWDG_KR, KR_KEY_EWA); + + /* set prescaler & reload registers */ + reg_write(wdt->regs, IWDG_PR, PR_256); /* prescaler fix to 256 */ + reg_write(wdt->regs, IWDG_RLR, reload); + reg_write(wdt->regs, IWDG_KR, KR_KEY_ENABLE); + + /* wait for the registers to be updated (max 100ms) */ + ret = readl_relaxed_poll_timeout(wdt->regs + IWDG_SR, val, + !(val & (FLAG_PVU | FLAG_RVU)), + SLEEP_US, TIMEOUT_US); + if (ret) { + dev_err(wdd->parent, + "Fail to set prescaler or reload registers\n"); + return ret; + } + + /* reload watchdog */ + reg_write(wdt->regs, IWDG_KR, KR_KEY_RELOAD); + + return 0; +} + +static int stm32_iwdg_ping(struct watchdog_device *wdd) +{ + struct stm32_iwdg *wdt = watchdog_get_drvdata(wdd); + + dev_dbg(wdd->parent, "%s\n", __func__); + + /* reload watchdog */ + reg_write(wdt->regs, IWDG_KR, KR_KEY_RELOAD); + + return 0; +} + +static int stm32_iwdg_set_timeout(struct watchdog_device *wdd, + unsigned int timeout) +{ + dev_dbg(wdd->parent, "%s timeout: %d sec\n", __func__, timeout); + + wdd->timeout = timeout; + + if (watchdog_active(wdd)) + return stm32_iwdg_start(wdd); + + return 0; +} + +static int stm32_iwdg_clk_init(struct platform_device *pdev, + struct stm32_iwdg *wdt) +{ + u32 ret; + + wdt->clk_lsi = devm_clk_get(&pdev->dev, "lsi"); + if (IS_ERR(wdt->clk_lsi)) { + dev_err(&pdev->dev, "Unable to get lsi clock\n"); + return PTR_ERR(wdt->clk_lsi); + } + + /* optional peripheral clock */ + if (wdt->has_pclk) { + wdt->clk_pclk = devm_clk_get(&pdev->dev, "pclk"); + if (IS_ERR(wdt->clk_pclk)) { + dev_err(&pdev->dev, "Unable to get pclk clock\n"); + return PTR_ERR(wdt->clk_pclk); + } + + ret = clk_prepare_enable(wdt->clk_pclk); + if (ret) { + dev_err(&pdev->dev, "Unable to prepare pclk clock\n"); + return ret; + } + } + + ret = clk_prepare_enable(wdt->clk_lsi); + if (ret) { + dev_err(&pdev->dev, "Unable to prepare lsi clock\n"); + clk_disable_unprepare(wdt->clk_pclk); + return ret; + } + + wdt->rate = clk_get_rate(wdt->clk_lsi); + + return 0; +} + +static const struct watchdog_info stm32_iwdg_info = { + .options = WDIOF_SETTIMEOUT | + WDIOF_MAGICCLOSE | + WDIOF_KEEPALIVEPING, + .identity = "STM32 Independent Watchdog", +}; + +static const struct watchdog_ops stm32_iwdg_ops = { + .owner = THIS_MODULE, + .start = stm32_iwdg_start, + .ping = stm32_iwdg_ping, + .set_timeout = stm32_iwdg_set_timeout, +}; + +static const struct of_device_id stm32_iwdg_of_match[] = { + { .compatible = "st,stm32-iwdg", .data = (void *)!HAS_PCLK }, + { .compatible = "st,stm32mp1-iwdg", .data = (void *)HAS_PCLK }, + { /* end node */ } +}; +MODULE_DEVICE_TABLE(of, stm32_iwdg_of_match); + +static int stm32_iwdg_probe(struct platform_device *pdev) +{ + struct watchdog_device *wdd; + const struct of_device_id *match; + struct stm32_iwdg *wdt; + struct resource *res; + int ret; + + match = of_match_device(stm32_iwdg_of_match, &pdev->dev); + if (!match) + return -ENODEV; + + wdt = devm_kzalloc(&pdev->dev, sizeof(*wdt), GFP_KERNEL); + if (!wdt) + return -ENOMEM; + + wdt->has_pclk = match->data; + + /* This is the timer base. */ + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + wdt->regs = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(wdt->regs)) { + dev_err(&pdev->dev, "Could not get resource\n"); + return PTR_ERR(wdt->regs); + } + + ret = stm32_iwdg_clk_init(pdev, wdt); + if (ret) + return ret; + + /* Initialize struct watchdog_device. */ + wdd = &wdt->wdd; + wdd->info = &stm32_iwdg_info; + wdd->ops = &stm32_iwdg_ops; + wdd->min_timeout = ((RLR_MIN + 1) * 256) / wdt->rate; + wdd->max_hw_heartbeat_ms = ((RLR_MAX + 1) * 256 * 1000) / wdt->rate; + wdd->parent = &pdev->dev; + + watchdog_set_drvdata(wdd, wdt); + watchdog_set_nowayout(wdd, WATCHDOG_NOWAYOUT); + + ret = watchdog_init_timeout(wdd, 0, &pdev->dev); + if (ret) + dev_warn(&pdev->dev, + "unable to set timeout value, using default\n"); + + ret = watchdog_register_device(wdd); + if (ret) { + dev_err(&pdev->dev, "failed to register watchdog device\n"); + goto err; + } + + platform_set_drvdata(pdev, wdt); + + return 0; +err: + clk_disable_unprepare(wdt->clk_lsi); + clk_disable_unprepare(wdt->clk_pclk); + + return ret; +} + +static int stm32_iwdg_remove(struct platform_device *pdev) +{ + struct stm32_iwdg *wdt = platform_get_drvdata(pdev); + + watchdog_unregister_device(&wdt->wdd); + clk_disable_unprepare(wdt->clk_lsi); + clk_disable_unprepare(wdt->clk_pclk); + + return 0; +} + +static struct platform_driver stm32_iwdg_driver = { + .probe = stm32_iwdg_probe, + .remove = stm32_iwdg_remove, + .driver = { + .name = "iwdg", + .of_match_table = of_match_ptr(stm32_iwdg_of_match), + }, +}; +module_platform_driver(stm32_iwdg_driver); + +MODULE_AUTHOR("Yannick Fertre <yannick.fertre@st.com>"); +MODULE_DESCRIPTION("STMicroelectronics STM32 Independent Watchdog Driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/watchdog/stmp3xxx_rtc_wdt.c b/drivers/watchdog/stmp3xxx_rtc_wdt.c new file mode 100644 index 000000000..994c54cc6 --- /dev/null +++ b/drivers/watchdog/stmp3xxx_rtc_wdt.c @@ -0,0 +1,155 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Watchdog driver for the RTC based watchdog in STMP3xxx and i.MX23/28 + * + * Author: Wolfram Sang <kernel@pengutronix.de> + * + * Copyright (C) 2011-12 Wolfram Sang, Pengutronix + */ +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/watchdog.h> +#include <linux/platform_device.h> +#include <linux/stmp3xxx_rtc_wdt.h> +#include <linux/notifier.h> +#include <linux/reboot.h> + +#define WDOG_TICK_RATE 1000 /* 1 kHz clock */ +#define STMP3XXX_DEFAULT_TIMEOUT 19 +#define STMP3XXX_MAX_TIMEOUT (UINT_MAX / WDOG_TICK_RATE) + +static int heartbeat = STMP3XXX_DEFAULT_TIMEOUT; +module_param(heartbeat, uint, 0); +MODULE_PARM_DESC(heartbeat, "Watchdog heartbeat period in seconds from 1 to " + __MODULE_STRING(STMP3XXX_MAX_TIMEOUT) ", default " + __MODULE_STRING(STMP3XXX_DEFAULT_TIMEOUT)); + +static int wdt_start(struct watchdog_device *wdd) +{ + struct device *dev = watchdog_get_drvdata(wdd); + struct stmp3xxx_wdt_pdata *pdata = dev_get_platdata(dev); + + pdata->wdt_set_timeout(dev->parent, wdd->timeout * WDOG_TICK_RATE); + return 0; +} + +static int wdt_stop(struct watchdog_device *wdd) +{ + struct device *dev = watchdog_get_drvdata(wdd); + struct stmp3xxx_wdt_pdata *pdata = dev_get_platdata(dev); + + pdata->wdt_set_timeout(dev->parent, 0); + return 0; +} + +static int wdt_set_timeout(struct watchdog_device *wdd, unsigned new_timeout) +{ + wdd->timeout = new_timeout; + return wdt_start(wdd); +} + +static const struct watchdog_info stmp3xxx_wdt_ident = { + .options = WDIOF_MAGICCLOSE | WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING, + .identity = "STMP3XXX RTC Watchdog", +}; + +static const struct watchdog_ops stmp3xxx_wdt_ops = { + .owner = THIS_MODULE, + .start = wdt_start, + .stop = wdt_stop, + .set_timeout = wdt_set_timeout, +}; + +static struct watchdog_device stmp3xxx_wdd = { + .info = &stmp3xxx_wdt_ident, + .ops = &stmp3xxx_wdt_ops, + .min_timeout = 1, + .max_timeout = STMP3XXX_MAX_TIMEOUT, + .status = WATCHDOG_NOWAYOUT_INIT_STATUS, +}; + +static int wdt_notify_sys(struct notifier_block *nb, unsigned long code, + void *unused) +{ + switch (code) { + case SYS_DOWN: /* keep enabled, system might crash while going down */ + break; + case SYS_HALT: /* allow the system to actually halt */ + case SYS_POWER_OFF: + wdt_stop(&stmp3xxx_wdd); + break; + } + + return NOTIFY_DONE; +} + +static struct notifier_block wdt_notifier = { + .notifier_call = wdt_notify_sys, +}; + +static int stmp3xxx_wdt_probe(struct platform_device *pdev) +{ + int ret; + + watchdog_set_drvdata(&stmp3xxx_wdd, &pdev->dev); + + stmp3xxx_wdd.timeout = clamp_t(unsigned, heartbeat, 1, STMP3XXX_MAX_TIMEOUT); + stmp3xxx_wdd.parent = &pdev->dev; + + ret = watchdog_register_device(&stmp3xxx_wdd); + if (ret < 0) { + dev_err(&pdev->dev, "cannot register watchdog device\n"); + return ret; + } + + if (register_reboot_notifier(&wdt_notifier)) + dev_warn(&pdev->dev, "cannot register reboot notifier\n"); + + dev_info(&pdev->dev, "initialized watchdog with heartbeat %ds\n", + stmp3xxx_wdd.timeout); + return 0; +} + +static int stmp3xxx_wdt_remove(struct platform_device *pdev) +{ + unregister_reboot_notifier(&wdt_notifier); + watchdog_unregister_device(&stmp3xxx_wdd); + return 0; +} + +static int __maybe_unused stmp3xxx_wdt_suspend(struct device *dev) +{ + struct watchdog_device *wdd = &stmp3xxx_wdd; + + if (watchdog_active(wdd)) + return wdt_stop(wdd); + + return 0; +} + +static int __maybe_unused stmp3xxx_wdt_resume(struct device *dev) +{ + struct watchdog_device *wdd = &stmp3xxx_wdd; + + if (watchdog_active(wdd)) + return wdt_start(wdd); + + return 0; +} + +static SIMPLE_DEV_PM_OPS(stmp3xxx_wdt_pm_ops, + stmp3xxx_wdt_suspend, stmp3xxx_wdt_resume); + +static struct platform_driver stmp3xxx_wdt_driver = { + .driver = { + .name = "stmp3xxx_rtc_wdt", + .pm = &stmp3xxx_wdt_pm_ops, + }, + .probe = stmp3xxx_wdt_probe, + .remove = stmp3xxx_wdt_remove, +}; +module_platform_driver(stmp3xxx_wdt_driver); + +MODULE_DESCRIPTION("STMP3XXX RTC Watchdog Driver"); +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Wolfram Sang <kernel@pengutronix.de>"); diff --git a/drivers/watchdog/sun4v_wdt.c b/drivers/watchdog/sun4v_wdt.c new file mode 100644 index 000000000..009079736 --- /dev/null +++ b/drivers/watchdog/sun4v_wdt.c @@ -0,0 +1,191 @@ +/* + * sun4v watchdog timer + * (c) Copyright 2016 Oracle Corporation + * + * Implement a simple watchdog driver using the built-in sun4v hypervisor + * watchdog support. If time expires, the hypervisor stops or bounces + * the guest domain. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/errno.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/watchdog.h> +#include <asm/hypervisor.h> +#include <asm/mdesc.h> + +#define WDT_TIMEOUT 60 +#define WDT_MAX_TIMEOUT 31536000 +#define WDT_MIN_TIMEOUT 1 +#define WDT_DEFAULT_RESOLUTION_MS 1000 /* 1 second */ + +static unsigned int timeout; +module_param(timeout, uint, 0); +MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds (default=" + __MODULE_STRING(WDT_TIMEOUT) ")"); + +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, S_IRUGO); +MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); + +static int sun4v_wdt_stop(struct watchdog_device *wdd) +{ + sun4v_mach_set_watchdog(0, NULL); + + return 0; +} + +static int sun4v_wdt_ping(struct watchdog_device *wdd) +{ + int hverr; + + /* + * HV watchdog timer will round up the timeout + * passed in to the nearest multiple of the + * watchdog resolution in milliseconds. + */ + hverr = sun4v_mach_set_watchdog(wdd->timeout * 1000, NULL); + if (hverr == HV_EINVAL) + return -EINVAL; + + return 0; +} + +static int sun4v_wdt_set_timeout(struct watchdog_device *wdd, + unsigned int timeout) +{ + wdd->timeout = timeout; + + return 0; +} + +static const struct watchdog_info sun4v_wdt_ident = { + .options = WDIOF_SETTIMEOUT | + WDIOF_MAGICCLOSE | + WDIOF_KEEPALIVEPING, + .identity = "sun4v hypervisor watchdog", + .firmware_version = 0, +}; + +static const struct watchdog_ops sun4v_wdt_ops = { + .owner = THIS_MODULE, + .start = sun4v_wdt_ping, + .stop = sun4v_wdt_stop, + .ping = sun4v_wdt_ping, + .set_timeout = sun4v_wdt_set_timeout, +}; + +static struct watchdog_device wdd = { + .info = &sun4v_wdt_ident, + .ops = &sun4v_wdt_ops, + .min_timeout = WDT_MIN_TIMEOUT, + .max_timeout = WDT_MAX_TIMEOUT, + .timeout = WDT_TIMEOUT, +}; + +static int __init sun4v_wdt_init(void) +{ + struct mdesc_handle *handle; + u64 node; + const u64 *value; + int err = 0; + unsigned long major = 1, minor = 1; + + /* + * There are 2 properties that can be set from the control + * domain for the watchdog. + * watchdog-resolution + * watchdog-max-timeout + * + * We can expect a handle to be returned otherwise something + * serious is wrong. Correct to return -ENODEV here. + */ + + handle = mdesc_grab(); + if (!handle) + return -ENODEV; + + node = mdesc_node_by_name(handle, MDESC_NODE_NULL, "platform"); + err = -ENODEV; + if (node == MDESC_NODE_NULL) + goto out_release; + + /* + * This is a safe way to validate if we are on the right + * platform. + */ + if (sun4v_hvapi_register(HV_GRP_CORE, major, &minor)) + goto out_hv_unreg; + + /* Allow value of watchdog-resolution up to 1s (default) */ + value = mdesc_get_property(handle, node, "watchdog-resolution", NULL); + err = -EINVAL; + if (value) { + if (*value == 0 || + *value > WDT_DEFAULT_RESOLUTION_MS) + goto out_hv_unreg; + } + + value = mdesc_get_property(handle, node, "watchdog-max-timeout", NULL); + if (value) { + /* + * If the property value (in ms) is smaller than + * min_timeout, return -EINVAL. + */ + if (*value < wdd.min_timeout * 1000) + goto out_hv_unreg; + + /* + * If the property value is smaller than + * default max_timeout then set watchdog max_timeout to + * the value of the property in seconds. + */ + if (*value < wdd.max_timeout * 1000) + wdd.max_timeout = *value / 1000; + } + + watchdog_init_timeout(&wdd, timeout, NULL); + + watchdog_set_nowayout(&wdd, nowayout); + + err = watchdog_register_device(&wdd); + if (err) + goto out_hv_unreg; + + pr_info("initialized (timeout=%ds, nowayout=%d)\n", + wdd.timeout, nowayout); + + mdesc_release(handle); + + return 0; + +out_hv_unreg: + sun4v_hvapi_unregister(HV_GRP_CORE); + +out_release: + mdesc_release(handle); + return err; +} + +static void __exit sun4v_wdt_exit(void) +{ + sun4v_hvapi_unregister(HV_GRP_CORE); + watchdog_unregister_device(&wdd); +} + +module_init(sun4v_wdt_init); +module_exit(sun4v_wdt_exit); + +MODULE_AUTHOR("Wim Coekaerts <wim.coekaerts@oracle.com>"); +MODULE_DESCRIPTION("sun4v watchdog driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/watchdog/sunxi_wdt.c b/drivers/watchdog/sunxi_wdt.c new file mode 100644 index 000000000..c6c736569 --- /dev/null +++ b/drivers/watchdog/sunxi_wdt.c @@ -0,0 +1,300 @@ +/* + * sunxi Watchdog Driver + * + * Copyright (c) 2013 Carlo Caione + * 2012 Henrik Nordstrom + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * Based on xen_wdt.c + * (c) Copyright 2010 Novell, Inc. + */ + +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/err.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/platform_device.h> +#include <linux/types.h> +#include <linux/watchdog.h> + +#define WDT_MAX_TIMEOUT 16 +#define WDT_MIN_TIMEOUT 1 +#define WDT_TIMEOUT_MASK 0x0F + +#define WDT_CTRL_RELOAD ((1 << 0) | (0x0a57 << 1)) + +#define WDT_MODE_EN (1 << 0) + +#define DRV_NAME "sunxi-wdt" +#define DRV_VERSION "1.0" + +static bool nowayout = WATCHDOG_NOWAYOUT; +static unsigned int timeout; + +/* + * This structure stores the register offsets for different variants + * of Allwinner's watchdog hardware. + */ +struct sunxi_wdt_reg { + u8 wdt_ctrl; + u8 wdt_cfg; + u8 wdt_mode; + u8 wdt_timeout_shift; + u8 wdt_reset_mask; + u8 wdt_reset_val; +}; + +struct sunxi_wdt_dev { + struct watchdog_device wdt_dev; + void __iomem *wdt_base; + const struct sunxi_wdt_reg *wdt_regs; +}; + +/* + * wdt_timeout_map maps the watchdog timer interval value in seconds to + * the value of the register WDT_MODE at bits .wdt_timeout_shift ~ +3 + * + * [timeout seconds] = register value + * + */ + +static const int wdt_timeout_map[] = { + [1] = 0x1, /* 1s */ + [2] = 0x2, /* 2s */ + [3] = 0x3, /* 3s */ + [4] = 0x4, /* 4s */ + [5] = 0x5, /* 5s */ + [6] = 0x6, /* 6s */ + [8] = 0x7, /* 8s */ + [10] = 0x8, /* 10s */ + [12] = 0x9, /* 12s */ + [14] = 0xA, /* 14s */ + [16] = 0xB, /* 16s */ +}; + + +static int sunxi_wdt_restart(struct watchdog_device *wdt_dev, + unsigned long action, void *data) +{ + struct sunxi_wdt_dev *sunxi_wdt = watchdog_get_drvdata(wdt_dev); + void __iomem *wdt_base = sunxi_wdt->wdt_base; + const struct sunxi_wdt_reg *regs = sunxi_wdt->wdt_regs; + u32 val; + + /* Set system reset function */ + val = readl(wdt_base + regs->wdt_cfg); + val &= ~(regs->wdt_reset_mask); + val |= regs->wdt_reset_val; + writel(val, wdt_base + regs->wdt_cfg); + + /* Set lowest timeout and enable watchdog */ + val = readl(wdt_base + regs->wdt_mode); + val &= ~(WDT_TIMEOUT_MASK << regs->wdt_timeout_shift); + val |= WDT_MODE_EN; + writel(val, wdt_base + regs->wdt_mode); + + /* + * Restart the watchdog. The default (and lowest) interval + * value for the watchdog is 0.5s. + */ + writel(WDT_CTRL_RELOAD, wdt_base + regs->wdt_ctrl); + + while (1) { + mdelay(5); + val = readl(wdt_base + regs->wdt_mode); + val |= WDT_MODE_EN; + writel(val, wdt_base + regs->wdt_mode); + } + return 0; +} + +static int sunxi_wdt_ping(struct watchdog_device *wdt_dev) +{ + struct sunxi_wdt_dev *sunxi_wdt = watchdog_get_drvdata(wdt_dev); + void __iomem *wdt_base = sunxi_wdt->wdt_base; + const struct sunxi_wdt_reg *regs = sunxi_wdt->wdt_regs; + + writel(WDT_CTRL_RELOAD, wdt_base + regs->wdt_ctrl); + + return 0; +} + +static int sunxi_wdt_set_timeout(struct watchdog_device *wdt_dev, + unsigned int timeout) +{ + struct sunxi_wdt_dev *sunxi_wdt = watchdog_get_drvdata(wdt_dev); + void __iomem *wdt_base = sunxi_wdt->wdt_base; + const struct sunxi_wdt_reg *regs = sunxi_wdt->wdt_regs; + u32 reg; + + if (wdt_timeout_map[timeout] == 0) + timeout++; + + sunxi_wdt->wdt_dev.timeout = timeout; + + reg = readl(wdt_base + regs->wdt_mode); + reg &= ~(WDT_TIMEOUT_MASK << regs->wdt_timeout_shift); + reg |= wdt_timeout_map[timeout] << regs->wdt_timeout_shift; + writel(reg, wdt_base + regs->wdt_mode); + + sunxi_wdt_ping(wdt_dev); + + return 0; +} + +static int sunxi_wdt_stop(struct watchdog_device *wdt_dev) +{ + struct sunxi_wdt_dev *sunxi_wdt = watchdog_get_drvdata(wdt_dev); + void __iomem *wdt_base = sunxi_wdt->wdt_base; + const struct sunxi_wdt_reg *regs = sunxi_wdt->wdt_regs; + + writel(0, wdt_base + regs->wdt_mode); + + return 0; +} + +static int sunxi_wdt_start(struct watchdog_device *wdt_dev) +{ + u32 reg; + struct sunxi_wdt_dev *sunxi_wdt = watchdog_get_drvdata(wdt_dev); + void __iomem *wdt_base = sunxi_wdt->wdt_base; + const struct sunxi_wdt_reg *regs = sunxi_wdt->wdt_regs; + int ret; + + ret = sunxi_wdt_set_timeout(&sunxi_wdt->wdt_dev, + sunxi_wdt->wdt_dev.timeout); + if (ret < 0) + return ret; + + /* Set system reset function */ + reg = readl(wdt_base + regs->wdt_cfg); + reg &= ~(regs->wdt_reset_mask); + reg |= regs->wdt_reset_val; + writel(reg, wdt_base + regs->wdt_cfg); + + /* Enable watchdog */ + reg = readl(wdt_base + regs->wdt_mode); + reg |= WDT_MODE_EN; + writel(reg, wdt_base + regs->wdt_mode); + + return 0; +} + +static const struct watchdog_info sunxi_wdt_info = { + .identity = DRV_NAME, + .options = WDIOF_SETTIMEOUT | + WDIOF_KEEPALIVEPING | + WDIOF_MAGICCLOSE, +}; + +static const struct watchdog_ops sunxi_wdt_ops = { + .owner = THIS_MODULE, + .start = sunxi_wdt_start, + .stop = sunxi_wdt_stop, + .ping = sunxi_wdt_ping, + .set_timeout = sunxi_wdt_set_timeout, + .restart = sunxi_wdt_restart, +}; + +static const struct sunxi_wdt_reg sun4i_wdt_reg = { + .wdt_ctrl = 0x00, + .wdt_cfg = 0x04, + .wdt_mode = 0x04, + .wdt_timeout_shift = 3, + .wdt_reset_mask = 0x02, + .wdt_reset_val = 0x02, +}; + +static const struct sunxi_wdt_reg sun6i_wdt_reg = { + .wdt_ctrl = 0x10, + .wdt_cfg = 0x14, + .wdt_mode = 0x18, + .wdt_timeout_shift = 4, + .wdt_reset_mask = 0x03, + .wdt_reset_val = 0x01, +}; + +static const struct of_device_id sunxi_wdt_dt_ids[] = { + { .compatible = "allwinner,sun4i-a10-wdt", .data = &sun4i_wdt_reg }, + { .compatible = "allwinner,sun6i-a31-wdt", .data = &sun6i_wdt_reg }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, sunxi_wdt_dt_ids); + +static int sunxi_wdt_probe(struct platform_device *pdev) +{ + struct sunxi_wdt_dev *sunxi_wdt; + struct resource *res; + int err; + + sunxi_wdt = devm_kzalloc(&pdev->dev, sizeof(*sunxi_wdt), GFP_KERNEL); + if (!sunxi_wdt) + return -EINVAL; + + sunxi_wdt->wdt_regs = of_device_get_match_data(&pdev->dev); + if (!sunxi_wdt->wdt_regs) + return -ENODEV; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + sunxi_wdt->wdt_base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(sunxi_wdt->wdt_base)) + return PTR_ERR(sunxi_wdt->wdt_base); + + sunxi_wdt->wdt_dev.info = &sunxi_wdt_info; + sunxi_wdt->wdt_dev.ops = &sunxi_wdt_ops; + sunxi_wdt->wdt_dev.timeout = WDT_MAX_TIMEOUT; + sunxi_wdt->wdt_dev.max_timeout = WDT_MAX_TIMEOUT; + sunxi_wdt->wdt_dev.min_timeout = WDT_MIN_TIMEOUT; + sunxi_wdt->wdt_dev.parent = &pdev->dev; + + watchdog_init_timeout(&sunxi_wdt->wdt_dev, timeout, &pdev->dev); + watchdog_set_nowayout(&sunxi_wdt->wdt_dev, nowayout); + watchdog_set_restart_priority(&sunxi_wdt->wdt_dev, 128); + + watchdog_set_drvdata(&sunxi_wdt->wdt_dev, sunxi_wdt); + + sunxi_wdt_stop(&sunxi_wdt->wdt_dev); + + watchdog_stop_on_reboot(&sunxi_wdt->wdt_dev); + err = devm_watchdog_register_device(&pdev->dev, &sunxi_wdt->wdt_dev); + if (unlikely(err)) + return err; + + dev_info(&pdev->dev, "Watchdog enabled (timeout=%d sec, nowayout=%d)", + sunxi_wdt->wdt_dev.timeout, nowayout); + + return 0; +} + +static struct platform_driver sunxi_wdt_driver = { + .probe = sunxi_wdt_probe, + .driver = { + .name = DRV_NAME, + .of_match_table = sunxi_wdt_dt_ids, + }, +}; + +module_platform_driver(sunxi_wdt_driver); + +module_param(timeout, uint, 0); +MODULE_PARM_DESC(timeout, "Watchdog heartbeat in seconds"); + +module_param(nowayout, bool, 0); +MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started " + "(default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Carlo Caione <carlo.caione@gmail.com>"); +MODULE_AUTHOR("Henrik Nordstrom <henrik@henriknordstrom.net>"); +MODULE_DESCRIPTION("sunxi WatchDog Timer Driver"); +MODULE_VERSION(DRV_VERSION); diff --git a/drivers/watchdog/tangox_wdt.c b/drivers/watchdog/tangox_wdt.c new file mode 100644 index 000000000..d0b53f3c0 --- /dev/null +++ b/drivers/watchdog/tangox_wdt.c @@ -0,0 +1,220 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2015 Mans Rullgard <mans@mansr.com> + * SMP86xx/SMP87xx Watchdog driver + */ + +#include <linux/bitops.h> +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/mod_devicetable.h> +#include <linux/platform_device.h> +#include <linux/watchdog.h> + +#define DEFAULT_TIMEOUT 30 + +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); +MODULE_PARM_DESC(nowayout, + "Watchdog cannot be stopped once started (default=" + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); + +static unsigned int timeout; +module_param(timeout, int, 0); +MODULE_PARM_DESC(timeout, "Watchdog timeout"); + +/* + * Counter counts down from programmed value. Reset asserts when + * the counter reaches 1. + */ +#define WD_COUNTER 0 + +#define WD_CONFIG 4 +#define WD_CONFIG_XTAL_IN BIT(0) +#define WD_CONFIG_DISABLE BIT(31) + +struct tangox_wdt_device { + struct watchdog_device wdt; + void __iomem *base; + unsigned long clk_rate; + struct clk *clk; +}; + +static int tangox_wdt_set_timeout(struct watchdog_device *wdt, + unsigned int new_timeout) +{ + wdt->timeout = new_timeout; + + return 0; +} + +static int tangox_wdt_start(struct watchdog_device *wdt) +{ + struct tangox_wdt_device *dev = watchdog_get_drvdata(wdt); + u32 ticks; + + ticks = 1 + wdt->timeout * dev->clk_rate; + writel(ticks, dev->base + WD_COUNTER); + + return 0; +} + +static int tangox_wdt_stop(struct watchdog_device *wdt) +{ + struct tangox_wdt_device *dev = watchdog_get_drvdata(wdt); + + writel(0, dev->base + WD_COUNTER); + + return 0; +} + +static unsigned int tangox_wdt_get_timeleft(struct watchdog_device *wdt) +{ + struct tangox_wdt_device *dev = watchdog_get_drvdata(wdt); + u32 count; + + count = readl(dev->base + WD_COUNTER); + + if (!count) + return 0; + + return (count - 1) / dev->clk_rate; +} + +static const struct watchdog_info tangox_wdt_info = { + .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE, + .identity = "tangox watchdog", +}; + +static int tangox_wdt_restart(struct watchdog_device *wdt, + unsigned long action, void *data) +{ + struct tangox_wdt_device *dev = watchdog_get_drvdata(wdt); + + writel(1, dev->base + WD_COUNTER); + + return 0; +} + +static const struct watchdog_ops tangox_wdt_ops = { + .start = tangox_wdt_start, + .stop = tangox_wdt_stop, + .set_timeout = tangox_wdt_set_timeout, + .get_timeleft = tangox_wdt_get_timeleft, + .restart = tangox_wdt_restart, +}; + +static int tangox_wdt_probe(struct platform_device *pdev) +{ + struct tangox_wdt_device *dev; + struct resource *res; + u32 config; + int err; + + dev = devm_kzalloc(&pdev->dev, sizeof(*dev), GFP_KERNEL); + if (!dev) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + dev->base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(dev->base)) + return PTR_ERR(dev->base); + + dev->clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(dev->clk)) + return PTR_ERR(dev->clk); + + err = clk_prepare_enable(dev->clk); + if (err) + return err; + + dev->clk_rate = clk_get_rate(dev->clk); + if (!dev->clk_rate) { + err = -EINVAL; + goto err; + } + + dev->wdt.parent = &pdev->dev; + dev->wdt.info = &tangox_wdt_info; + dev->wdt.ops = &tangox_wdt_ops; + dev->wdt.timeout = DEFAULT_TIMEOUT; + dev->wdt.min_timeout = 1; + dev->wdt.max_hw_heartbeat_ms = (U32_MAX - 1) / dev->clk_rate; + + watchdog_init_timeout(&dev->wdt, timeout, &pdev->dev); + watchdog_set_nowayout(&dev->wdt, nowayout); + watchdog_set_drvdata(&dev->wdt, dev); + + /* + * Deactivate counter if disable bit is set to avoid + * accidental reset. + */ + config = readl(dev->base + WD_CONFIG); + if (config & WD_CONFIG_DISABLE) + writel(0, dev->base + WD_COUNTER); + + writel(WD_CONFIG_XTAL_IN, dev->base + WD_CONFIG); + + /* + * Mark as active and restart with configured timeout if + * already running. + */ + if (readl(dev->base + WD_COUNTER)) { + set_bit(WDOG_HW_RUNNING, &dev->wdt.status); + tangox_wdt_start(&dev->wdt); + } + + watchdog_set_restart_priority(&dev->wdt, 128); + + err = watchdog_register_device(&dev->wdt); + if (err) + goto err; + + platform_set_drvdata(pdev, dev); + + dev_info(&pdev->dev, "SMP86xx/SMP87xx watchdog registered\n"); + + return 0; + + err: + clk_disable_unprepare(dev->clk); + return err; +} + +static int tangox_wdt_remove(struct platform_device *pdev) +{ + struct tangox_wdt_device *dev = platform_get_drvdata(pdev); + + tangox_wdt_stop(&dev->wdt); + clk_disable_unprepare(dev->clk); + + watchdog_unregister_device(&dev->wdt); + + return 0; +} + +static const struct of_device_id tangox_wdt_dt_ids[] = { + { .compatible = "sigma,smp8642-wdt" }, + { .compatible = "sigma,smp8759-wdt" }, + { } +}; +MODULE_DEVICE_TABLE(of, tangox_wdt_dt_ids); + +static struct platform_driver tangox_wdt_driver = { + .probe = tangox_wdt_probe, + .remove = tangox_wdt_remove, + .driver = { + .name = "tangox-wdt", + .of_match_table = tangox_wdt_dt_ids, + }, +}; + +module_platform_driver(tangox_wdt_driver); + +MODULE_AUTHOR("Mans Rullgard <mans@mansr.com>"); +MODULE_DESCRIPTION("SMP86xx/SMP87xx Watchdog driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/watchdog/tegra_wdt.c b/drivers/watchdog/tegra_wdt.c new file mode 100644 index 000000000..877dd39bd --- /dev/null +++ b/drivers/watchdog/tegra_wdt.c @@ -0,0 +1,294 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2014, NVIDIA CORPORATION. All rights reserved. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/watchdog.h> + +/* minimum and maximum watchdog trigger timeout, in seconds */ +#define MIN_WDT_TIMEOUT 1 +#define MAX_WDT_TIMEOUT 255 + +/* + * Base of the WDT registers, from the timer base address. There are + * actually 5 watchdogs that can be configured (by pairing with an available + * timer), at bases 0x100 + (WDT ID) * 0x20, where WDT ID is 0 through 4. + * This driver only configures the first watchdog (WDT ID 0). + */ +#define WDT_BASE 0x100 +#define WDT_ID 0 + +/* + * Register base of the timer that's selected for pairing with the watchdog. + * This driver arbitrarily uses timer 5, which is currently unused by + * other drivers (in particular, the Tegra clocksource driver). If this + * needs to change, take care that the new timer is not used by the + * clocksource driver. + */ +#define WDT_TIMER_BASE 0x60 +#define WDT_TIMER_ID 5 + +/* WDT registers */ +#define WDT_CFG 0x0 +#define WDT_CFG_PERIOD_SHIFT 4 +#define WDT_CFG_PERIOD_MASK 0xff +#define WDT_CFG_INT_EN (1 << 12) +#define WDT_CFG_PMC2CAR_RST_EN (1 << 15) +#define WDT_STS 0x4 +#define WDT_STS_COUNT_SHIFT 4 +#define WDT_STS_COUNT_MASK 0xff +#define WDT_STS_EXP_SHIFT 12 +#define WDT_STS_EXP_MASK 0x3 +#define WDT_CMD 0x8 +#define WDT_CMD_START_COUNTER (1 << 0) +#define WDT_CMD_DISABLE_COUNTER (1 << 1) +#define WDT_UNLOCK (0xc) +#define WDT_UNLOCK_PATTERN (0xc45a << 0) + +/* Timer registers */ +#define TIMER_PTV 0x0 +#define TIMER_EN (1 << 31) +#define TIMER_PERIODIC (1 << 30) + +struct tegra_wdt { + struct watchdog_device wdd; + void __iomem *wdt_regs; + void __iomem *tmr_regs; +}; + +#define WDT_HEARTBEAT 120 +static int heartbeat = WDT_HEARTBEAT; +module_param(heartbeat, int, 0); +MODULE_PARM_DESC(heartbeat, + "Watchdog heartbeats in seconds. (default = " + __MODULE_STRING(WDT_HEARTBEAT) ")"); + +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); +MODULE_PARM_DESC(nowayout, + "Watchdog cannot be stopped once started (default=" + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); + +static int tegra_wdt_start(struct watchdog_device *wdd) +{ + struct tegra_wdt *wdt = watchdog_get_drvdata(wdd); + u32 val; + + /* + * This thing has a fixed 1MHz clock. Normally, we would set the + * period to 1 second by writing 1000000ul, but the watchdog system + * reset actually occurs on the 4th expiration of this counter, + * so we set the period to 1/4 of this amount. + */ + val = 1000000ul / 4; + val |= (TIMER_EN | TIMER_PERIODIC); + writel(val, wdt->tmr_regs + TIMER_PTV); + + /* + * Set number of periods and start counter. + * + * Interrupt handler is not required for user space + * WDT accesses, since the caller is responsible to ping the + * WDT to reset the counter before expiration, through ioctls. + */ + val = WDT_TIMER_ID | + (wdd->timeout << WDT_CFG_PERIOD_SHIFT) | + WDT_CFG_PMC2CAR_RST_EN; + writel(val, wdt->wdt_regs + WDT_CFG); + + writel(WDT_CMD_START_COUNTER, wdt->wdt_regs + WDT_CMD); + + return 0; +} + +static int tegra_wdt_stop(struct watchdog_device *wdd) +{ + struct tegra_wdt *wdt = watchdog_get_drvdata(wdd); + + writel(WDT_UNLOCK_PATTERN, wdt->wdt_regs + WDT_UNLOCK); + writel(WDT_CMD_DISABLE_COUNTER, wdt->wdt_regs + WDT_CMD); + writel(0, wdt->tmr_regs + TIMER_PTV); + + return 0; +} + +static int tegra_wdt_ping(struct watchdog_device *wdd) +{ + struct tegra_wdt *wdt = watchdog_get_drvdata(wdd); + + writel(WDT_CMD_START_COUNTER, wdt->wdt_regs + WDT_CMD); + + return 0; +} + +static int tegra_wdt_set_timeout(struct watchdog_device *wdd, + unsigned int timeout) +{ + wdd->timeout = timeout; + + if (watchdog_active(wdd)) { + tegra_wdt_stop(wdd); + return tegra_wdt_start(wdd); + } + + return 0; +} + +static unsigned int tegra_wdt_get_timeleft(struct watchdog_device *wdd) +{ + struct tegra_wdt *wdt = watchdog_get_drvdata(wdd); + u32 val; + int count; + int exp; + + val = readl(wdt->wdt_regs + WDT_STS); + + /* Current countdown (from timeout) */ + count = (val >> WDT_STS_COUNT_SHIFT) & WDT_STS_COUNT_MASK; + + /* Number of expirations (we are waiting for the 4th expiration) */ + exp = (val >> WDT_STS_EXP_SHIFT) & WDT_STS_EXP_MASK; + + /* + * The entire thing is divided by 4 because we are ticking down 4 times + * faster due to needing to wait for the 4th expiration. + */ + return (((3 - exp) * wdd->timeout) + count) / 4; +} + +static const struct watchdog_info tegra_wdt_info = { + .options = WDIOF_SETTIMEOUT | + WDIOF_MAGICCLOSE | + WDIOF_KEEPALIVEPING, + .firmware_version = 0, + .identity = "Tegra Watchdog", +}; + +static const struct watchdog_ops tegra_wdt_ops = { + .owner = THIS_MODULE, + .start = tegra_wdt_start, + .stop = tegra_wdt_stop, + .ping = tegra_wdt_ping, + .set_timeout = tegra_wdt_set_timeout, + .get_timeleft = tegra_wdt_get_timeleft, +}; + +static int tegra_wdt_probe(struct platform_device *pdev) +{ + struct watchdog_device *wdd; + struct tegra_wdt *wdt; + struct resource *res; + void __iomem *regs; + int ret; + + /* This is the timer base. */ + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + regs = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(regs)) + return PTR_ERR(regs); + + /* + * Allocate our watchdog driver data, which has the + * struct watchdog_device nested within it. + */ + wdt = devm_kzalloc(&pdev->dev, sizeof(*wdt), GFP_KERNEL); + if (!wdt) + return -ENOMEM; + + /* Initialize struct tegra_wdt. */ + wdt->wdt_regs = regs + WDT_BASE; + wdt->tmr_regs = regs + WDT_TIMER_BASE; + + /* Initialize struct watchdog_device. */ + wdd = &wdt->wdd; + wdd->timeout = heartbeat; + wdd->info = &tegra_wdt_info; + wdd->ops = &tegra_wdt_ops; + wdd->min_timeout = MIN_WDT_TIMEOUT; + wdd->max_timeout = MAX_WDT_TIMEOUT; + wdd->parent = &pdev->dev; + + watchdog_set_drvdata(wdd, wdt); + + watchdog_set_nowayout(wdd, nowayout); + + ret = devm_watchdog_register_device(&pdev->dev, wdd); + if (ret) { + dev_err(&pdev->dev, + "failed to register watchdog device\n"); + return ret; + } + + platform_set_drvdata(pdev, wdt); + + dev_info(&pdev->dev, + "initialized (heartbeat = %d sec, nowayout = %d)\n", + heartbeat, nowayout); + + return 0; +} + +static int tegra_wdt_remove(struct platform_device *pdev) +{ + struct tegra_wdt *wdt = platform_get_drvdata(pdev); + + tegra_wdt_stop(&wdt->wdd); + + dev_info(&pdev->dev, "removed wdt\n"); + + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int tegra_wdt_runtime_suspend(struct device *dev) +{ + struct tegra_wdt *wdt = dev_get_drvdata(dev); + + if (watchdog_active(&wdt->wdd)) + tegra_wdt_stop(&wdt->wdd); + + return 0; +} + +static int tegra_wdt_runtime_resume(struct device *dev) +{ + struct tegra_wdt *wdt = dev_get_drvdata(dev); + + if (watchdog_active(&wdt->wdd)) + tegra_wdt_start(&wdt->wdd); + + return 0; +} +#endif + +static const struct of_device_id tegra_wdt_of_match[] = { + { .compatible = "nvidia,tegra30-timer", }, + { }, +}; +MODULE_DEVICE_TABLE(of, tegra_wdt_of_match); + +static const struct dev_pm_ops tegra_wdt_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(tegra_wdt_runtime_suspend, + tegra_wdt_runtime_resume) +}; + +static struct platform_driver tegra_wdt_driver = { + .probe = tegra_wdt_probe, + .remove = tegra_wdt_remove, + .driver = { + .name = "tegra-wdt", + .pm = &tegra_wdt_pm_ops, + .of_match_table = tegra_wdt_of_match, + }, +}; +module_platform_driver(tegra_wdt_driver); + +MODULE_AUTHOR("NVIDIA Corporation"); +MODULE_DESCRIPTION("Tegra Watchdog Driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/watchdog/ts4800_wdt.c b/drivers/watchdog/ts4800_wdt.c new file mode 100644 index 000000000..2b8de8602 --- /dev/null +++ b/drivers/watchdog/ts4800_wdt.c @@ -0,0 +1,215 @@ +/* + * Watchdog driver for TS-4800 based boards + * + * Copyright (c) 2015 - Savoir-faire Linux + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/kernel.h> +#include <linux/mfd/syscon.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> +#include <linux/watchdog.h> + +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); +MODULE_PARM_DESC(nowayout, + "Watchdog cannot be stopped once started (default=" + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); + +/* possible feed values */ +#define TS4800_WDT_FEED_2S 0x1 +#define TS4800_WDT_FEED_10S 0x2 +#define TS4800_WDT_DISABLE 0x3 + +struct ts4800_wdt { + struct watchdog_device wdd; + struct regmap *regmap; + u32 feed_offset; + u32 feed_val; +}; + +/* + * TS-4800 supports the following timeout values: + * + * value desc + * --------------------- + * 0 feed for 338ms + * 1 feed for 2.706s + * 2 feed for 10.824s + * 3 disable watchdog + * + * Keep the regmap/timeout map ordered by timeout + */ +static const struct { + const int timeout; + const int regval; +} ts4800_wdt_map[] = { + { 2, TS4800_WDT_FEED_2S }, + { 10, TS4800_WDT_FEED_10S }, +}; + +#define MAX_TIMEOUT_INDEX (ARRAY_SIZE(ts4800_wdt_map) - 1) + +static void ts4800_write_feed(struct ts4800_wdt *wdt, u32 val) +{ + regmap_write(wdt->regmap, wdt->feed_offset, val); +} + +static int ts4800_wdt_start(struct watchdog_device *wdd) +{ + struct ts4800_wdt *wdt = watchdog_get_drvdata(wdd); + + ts4800_write_feed(wdt, wdt->feed_val); + return 0; +} + +static int ts4800_wdt_stop(struct watchdog_device *wdd) +{ + struct ts4800_wdt *wdt = watchdog_get_drvdata(wdd); + + ts4800_write_feed(wdt, TS4800_WDT_DISABLE); + return 0; +} + +static int ts4800_wdt_set_timeout(struct watchdog_device *wdd, + unsigned int timeout) +{ + struct ts4800_wdt *wdt = watchdog_get_drvdata(wdd); + int i; + + for (i = 0; i < MAX_TIMEOUT_INDEX; i++) { + if (ts4800_wdt_map[i].timeout >= timeout) + break; + } + + wdd->timeout = ts4800_wdt_map[i].timeout; + wdt->feed_val = ts4800_wdt_map[i].regval; + + return 0; +} + +static const struct watchdog_ops ts4800_wdt_ops = { + .owner = THIS_MODULE, + .start = ts4800_wdt_start, + .stop = ts4800_wdt_stop, + .set_timeout = ts4800_wdt_set_timeout, +}; + +static const struct watchdog_info ts4800_wdt_info = { + .options = WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE | WDIOF_KEEPALIVEPING, + .identity = "TS-4800 Watchdog", +}; + +static int ts4800_wdt_probe(struct platform_device *pdev) +{ + struct device_node *np = pdev->dev.of_node; + struct device_node *syscon_np; + struct watchdog_device *wdd; + struct ts4800_wdt *wdt; + u32 reg; + int ret; + + syscon_np = of_parse_phandle(np, "syscon", 0); + if (!syscon_np) { + dev_err(&pdev->dev, "no syscon property\n"); + return -ENODEV; + } + + ret = of_property_read_u32_index(np, "syscon", 1, ®); + if (ret < 0) { + dev_err(&pdev->dev, "no offset in syscon\n"); + return ret; + } + + /* allocate memory for watchdog struct */ + wdt = devm_kzalloc(&pdev->dev, sizeof(*wdt), GFP_KERNEL); + if (!wdt) + return -ENOMEM; + + /* set regmap and offset to know where to write */ + wdt->feed_offset = reg; + wdt->regmap = syscon_node_to_regmap(syscon_np); + if (IS_ERR(wdt->regmap)) { + dev_err(&pdev->dev, "cannot get parent's regmap\n"); + return PTR_ERR(wdt->regmap); + } + + /* Initialize struct watchdog_device */ + wdd = &wdt->wdd; + wdd->parent = &pdev->dev; + wdd->info = &ts4800_wdt_info; + wdd->ops = &ts4800_wdt_ops; + wdd->min_timeout = ts4800_wdt_map[0].timeout; + wdd->max_timeout = ts4800_wdt_map[MAX_TIMEOUT_INDEX].timeout; + + watchdog_set_drvdata(wdd, wdt); + watchdog_set_nowayout(wdd, nowayout); + watchdog_init_timeout(wdd, 0, &pdev->dev); + + /* + * As this watchdog supports only a few values, ts4800_wdt_set_timeout + * must be called to initialize timeout and feed_val with valid values. + * Default to maximum timeout if none, or an invalid one, is provided in + * device tree. + */ + if (!wdd->timeout) + wdd->timeout = wdd->max_timeout; + ts4800_wdt_set_timeout(wdd, wdd->timeout); + + /* + * The feed register is write-only, so it is not possible to determine + * watchdog's state. Disable it to be in a known state. + */ + ts4800_wdt_stop(wdd); + + ret = watchdog_register_device(wdd); + if (ret) { + dev_err(&pdev->dev, + "failed to register watchdog device\n"); + return ret; + } + + platform_set_drvdata(pdev, wdt); + + dev_info(&pdev->dev, + "initialized (timeout = %d sec, nowayout = %d)\n", + wdd->timeout, nowayout); + + return 0; +} + +static int ts4800_wdt_remove(struct platform_device *pdev) +{ + struct ts4800_wdt *wdt = platform_get_drvdata(pdev); + + watchdog_unregister_device(&wdt->wdd); + + return 0; +} + +static const struct of_device_id ts4800_wdt_of_match[] = { + { .compatible = "technologic,ts4800-wdt", }, + { }, +}; +MODULE_DEVICE_TABLE(of, ts4800_wdt_of_match); + +static struct platform_driver ts4800_wdt_driver = { + .probe = ts4800_wdt_probe, + .remove = ts4800_wdt_remove, + .driver = { + .name = "ts4800_wdt", + .of_match_table = ts4800_wdt_of_match, + }, +}; + +module_platform_driver(ts4800_wdt_driver); + +MODULE_AUTHOR("Damien Riegel <damien.riegel@savoirfairelinux.com>"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:ts4800_wdt"); diff --git a/drivers/watchdog/ts72xx_wdt.c b/drivers/watchdog/ts72xx_wdt.c new file mode 100644 index 000000000..811e43c39 --- /dev/null +++ b/drivers/watchdog/ts72xx_wdt.c @@ -0,0 +1,179 @@ +/* + * Watchdog driver for Technologic Systems TS-72xx based SBCs + * (TS-7200, TS-7250 and TS-7260). These boards have external + * glue logic CPLD chip, which includes programmable watchdog + * timer. + * + * Copyright (c) 2009 Mika Westerberg <mika.westerberg@iki.fi> + * + * This driver is based on ep93xx_wdt and wm831x_wdt drivers. + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/platform_device.h> +#include <linux/module.h> +#include <linux/watchdog.h> +#include <linux/io.h> + +#define TS72XX_WDT_DEFAULT_TIMEOUT 30 + +static int timeout; +module_param(timeout, int, 0); +MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds."); + +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); +MODULE_PARM_DESC(nowayout, "Disable watchdog shutdown on close"); + +/* priv->control_reg */ +#define TS72XX_WDT_CTRL_DISABLE 0x00 +#define TS72XX_WDT_CTRL_250MS 0x01 +#define TS72XX_WDT_CTRL_500MS 0x02 +#define TS72XX_WDT_CTRL_1SEC 0x03 +#define TS72XX_WDT_CTRL_RESERVED 0x04 +#define TS72XX_WDT_CTRL_2SEC 0x05 +#define TS72XX_WDT_CTRL_4SEC 0x06 +#define TS72XX_WDT_CTRL_8SEC 0x07 + +/* priv->feed_reg */ +#define TS72XX_WDT_FEED_VAL 0x05 + +struct ts72xx_wdt_priv { + void __iomem *control_reg; + void __iomem *feed_reg; + struct watchdog_device wdd; + unsigned char regval; +}; + +static int ts72xx_wdt_start(struct watchdog_device *wdd) +{ + struct ts72xx_wdt_priv *priv = watchdog_get_drvdata(wdd); + + writeb(TS72XX_WDT_FEED_VAL, priv->feed_reg); + writeb(priv->regval, priv->control_reg); + + return 0; +} + +static int ts72xx_wdt_stop(struct watchdog_device *wdd) +{ + struct ts72xx_wdt_priv *priv = watchdog_get_drvdata(wdd); + + writeb(TS72XX_WDT_FEED_VAL, priv->feed_reg); + writeb(TS72XX_WDT_CTRL_DISABLE, priv->control_reg); + + return 0; +} + +static int ts72xx_wdt_ping(struct watchdog_device *wdd) +{ + struct ts72xx_wdt_priv *priv = watchdog_get_drvdata(wdd); + + writeb(TS72XX_WDT_FEED_VAL, priv->feed_reg); + + return 0; +} + +static int ts72xx_wdt_settimeout(struct watchdog_device *wdd, unsigned int to) +{ + struct ts72xx_wdt_priv *priv = watchdog_get_drvdata(wdd); + + if (to == 1) { + priv->regval = TS72XX_WDT_CTRL_1SEC; + } else if (to == 2) { + priv->regval = TS72XX_WDT_CTRL_2SEC; + } else if (to <= 4) { + priv->regval = TS72XX_WDT_CTRL_4SEC; + to = 4; + } else { + priv->regval = TS72XX_WDT_CTRL_8SEC; + if (to <= 8) + to = 8; + } + + wdd->timeout = to; + + if (watchdog_active(wdd)) { + ts72xx_wdt_stop(wdd); + ts72xx_wdt_start(wdd); + } + + return 0; +} + +static const struct watchdog_info ts72xx_wdt_ident = { + .options = WDIOF_KEEPALIVEPING | + WDIOF_SETTIMEOUT | + WDIOF_MAGICCLOSE, + .firmware_version = 1, + .identity = "TS-72XX WDT", +}; + +static const struct watchdog_ops ts72xx_wdt_ops = { + .owner = THIS_MODULE, + .start = ts72xx_wdt_start, + .stop = ts72xx_wdt_stop, + .ping = ts72xx_wdt_ping, + .set_timeout = ts72xx_wdt_settimeout, +}; + +static int ts72xx_wdt_probe(struct platform_device *pdev) +{ + struct ts72xx_wdt_priv *priv; + struct watchdog_device *wdd; + struct resource *res; + int ret; + + priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + priv->control_reg = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(priv->control_reg)) + return PTR_ERR(priv->control_reg); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 1); + priv->feed_reg = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(priv->feed_reg)) + return PTR_ERR(priv->feed_reg); + + wdd = &priv->wdd; + wdd->info = &ts72xx_wdt_ident; + wdd->ops = &ts72xx_wdt_ops; + wdd->min_timeout = 1; + wdd->max_hw_heartbeat_ms = 8000; + wdd->parent = &pdev->dev; + + watchdog_set_nowayout(wdd, nowayout); + + wdd->timeout = TS72XX_WDT_DEFAULT_TIMEOUT; + watchdog_init_timeout(wdd, timeout, &pdev->dev); + + watchdog_set_drvdata(wdd, priv); + + ret = devm_watchdog_register_device(&pdev->dev, wdd); + if (ret) + return ret; + + dev_info(&pdev->dev, "TS-72xx Watchdog driver\n"); + + return 0; +} + +static struct platform_driver ts72xx_wdt_driver = { + .probe = ts72xx_wdt_probe, + .driver = { + .name = "ts72xx-wdt", + }, +}; + +module_platform_driver(ts72xx_wdt_driver); + +MODULE_AUTHOR("Mika Westerberg <mika.westerberg@iki.fi>"); +MODULE_DESCRIPTION("TS-72xx SBC Watchdog"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:ts72xx-wdt"); diff --git a/drivers/watchdog/twl4030_wdt.c b/drivers/watchdog/twl4030_wdt.c new file mode 100644 index 000000000..569fe85e5 --- /dev/null +++ b/drivers/watchdog/twl4030_wdt.c @@ -0,0 +1,154 @@ +/* + * Copyright (C) Nokia Corporation + * + * Written by Timo Kokkonen <timo.t.kokkonen at nokia.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/module.h> +#include <linux/types.h> +#include <linux/slab.h> +#include <linux/kernel.h> +#include <linux/watchdog.h> +#include <linux/platform_device.h> +#include <linux/mfd/twl.h> + +#define TWL4030_WATCHDOG_CFG_REG_OFFS 0x3 + +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); +MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started " + "(default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); + +static int twl4030_wdt_write(unsigned char val) +{ + return twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, val, + TWL4030_WATCHDOG_CFG_REG_OFFS); +} + +static int twl4030_wdt_start(struct watchdog_device *wdt) +{ + return twl4030_wdt_write(wdt->timeout + 1); +} + +static int twl4030_wdt_stop(struct watchdog_device *wdt) +{ + return twl4030_wdt_write(0); +} + +static int twl4030_wdt_set_timeout(struct watchdog_device *wdt, + unsigned int timeout) +{ + wdt->timeout = timeout; + return 0; +} + +static const struct watchdog_info twl4030_wdt_info = { + .options = WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE | WDIOF_KEEPALIVEPING, + .identity = "TWL4030 Watchdog", +}; + +static const struct watchdog_ops twl4030_wdt_ops = { + .owner = THIS_MODULE, + .start = twl4030_wdt_start, + .stop = twl4030_wdt_stop, + .set_timeout = twl4030_wdt_set_timeout, +}; + +static int twl4030_wdt_probe(struct platform_device *pdev) +{ + int ret = 0; + struct watchdog_device *wdt; + + wdt = devm_kzalloc(&pdev->dev, sizeof(*wdt), GFP_KERNEL); + if (!wdt) + return -ENOMEM; + + wdt->info = &twl4030_wdt_info; + wdt->ops = &twl4030_wdt_ops; + wdt->status = 0; + wdt->timeout = 30; + wdt->min_timeout = 1; + wdt->max_timeout = 30; + wdt->parent = &pdev->dev; + + watchdog_set_nowayout(wdt, nowayout); + platform_set_drvdata(pdev, wdt); + + twl4030_wdt_stop(wdt); + + ret = watchdog_register_device(wdt); + if (ret) + return ret; + + return 0; +} + +static int twl4030_wdt_remove(struct platform_device *pdev) +{ + struct watchdog_device *wdt = platform_get_drvdata(pdev); + + watchdog_unregister_device(wdt); + + return 0; +} + +#ifdef CONFIG_PM +static int twl4030_wdt_suspend(struct platform_device *pdev, pm_message_t state) +{ + struct watchdog_device *wdt = platform_get_drvdata(pdev); + if (watchdog_active(wdt)) + return twl4030_wdt_stop(wdt); + + return 0; +} + +static int twl4030_wdt_resume(struct platform_device *pdev) +{ + struct watchdog_device *wdt = platform_get_drvdata(pdev); + if (watchdog_active(wdt)) + return twl4030_wdt_start(wdt); + + return 0; +} +#else +#define twl4030_wdt_suspend NULL +#define twl4030_wdt_resume NULL +#endif + +static const struct of_device_id twl_wdt_of_match[] = { + { .compatible = "ti,twl4030-wdt", }, + { }, +}; +MODULE_DEVICE_TABLE(of, twl_wdt_of_match); + +static struct platform_driver twl4030_wdt_driver = { + .probe = twl4030_wdt_probe, + .remove = twl4030_wdt_remove, + .suspend = twl4030_wdt_suspend, + .resume = twl4030_wdt_resume, + .driver = { + .name = "twl4030_wdt", + .of_match_table = twl_wdt_of_match, + }, +}; + +module_platform_driver(twl4030_wdt_driver); + +MODULE_AUTHOR("Nokia Corporation"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:twl4030_wdt"); + diff --git a/drivers/watchdog/txx9wdt.c b/drivers/watchdog/txx9wdt.c new file mode 100644 index 000000000..6f7a9deb2 --- /dev/null +++ b/drivers/watchdog/txx9wdt.c @@ -0,0 +1,178 @@ +/* + * txx9wdt: A Hardware Watchdog Driver for TXx9 SoCs + * + * Copyright (C) 2007 Atsushi Nemoto <anemo@mba.ocn.ne.jp> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/types.h> +#include <linux/watchdog.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/clk.h> +#include <linux/err.h> +#include <linux/io.h> +#include <asm/txx9tmr.h> + +#define WD_TIMER_CCD 7 /* 1/256 */ +#define WD_TIMER_CLK (clk_get_rate(txx9_imclk) / (2 << WD_TIMER_CCD)) +#define WD_MAX_TIMEOUT ((0xffffffff >> (32 - TXX9_TIMER_BITS)) / WD_TIMER_CLK) +#define TIMER_MARGIN 60 /* Default is 60 seconds */ + +static unsigned int timeout = TIMER_MARGIN; /* in seconds */ +module_param(timeout, uint, 0); +MODULE_PARM_DESC(timeout, + "Watchdog timeout in seconds. " + "(0<timeout<((2^" __MODULE_STRING(TXX9_TIMER_BITS) ")/(IMCLK/256)), " + "default=" __MODULE_STRING(TIMER_MARGIN) ")"); + +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); +MODULE_PARM_DESC(nowayout, + "Watchdog cannot be stopped once started " + "(default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); + +static struct txx9_tmr_reg __iomem *txx9wdt_reg; +static struct clk *txx9_imclk; +static DEFINE_SPINLOCK(txx9_lock); + +static int txx9wdt_ping(struct watchdog_device *wdt_dev) +{ + spin_lock(&txx9_lock); + __raw_writel(TXx9_TMWTMR_TWIE | TXx9_TMWTMR_TWC, &txx9wdt_reg->wtmr); + spin_unlock(&txx9_lock); + return 0; +} + +static int txx9wdt_start(struct watchdog_device *wdt_dev) +{ + spin_lock(&txx9_lock); + __raw_writel(WD_TIMER_CLK * wdt_dev->timeout, &txx9wdt_reg->cpra); + __raw_writel(WD_TIMER_CCD, &txx9wdt_reg->ccdr); + __raw_writel(0, &txx9wdt_reg->tisr); /* clear pending interrupt */ + __raw_writel(TXx9_TMTCR_TCE | TXx9_TMTCR_CCDE | TXx9_TMTCR_TMODE_WDOG, + &txx9wdt_reg->tcr); + __raw_writel(TXx9_TMWTMR_TWIE | TXx9_TMWTMR_TWC, &txx9wdt_reg->wtmr); + spin_unlock(&txx9_lock); + return 0; +} + +static int txx9wdt_stop(struct watchdog_device *wdt_dev) +{ + spin_lock(&txx9_lock); + __raw_writel(TXx9_TMWTMR_WDIS, &txx9wdt_reg->wtmr); + __raw_writel(__raw_readl(&txx9wdt_reg->tcr) & ~TXx9_TMTCR_TCE, + &txx9wdt_reg->tcr); + spin_unlock(&txx9_lock); + return 0; +} + +static int txx9wdt_set_timeout(struct watchdog_device *wdt_dev, + unsigned int new_timeout) +{ + wdt_dev->timeout = new_timeout; + txx9wdt_stop(wdt_dev); + txx9wdt_start(wdt_dev); + return 0; +} + +static const struct watchdog_info txx9wdt_info = { + .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE, + .identity = "Hardware Watchdog for TXx9", +}; + +static const struct watchdog_ops txx9wdt_ops = { + .owner = THIS_MODULE, + .start = txx9wdt_start, + .stop = txx9wdt_stop, + .ping = txx9wdt_ping, + .set_timeout = txx9wdt_set_timeout, +}; + +static struct watchdog_device txx9wdt = { + .info = &txx9wdt_info, + .ops = &txx9wdt_ops, +}; + +static int __init txx9wdt_probe(struct platform_device *dev) +{ + struct resource *res; + int ret; + + txx9_imclk = clk_get(NULL, "imbus_clk"); + if (IS_ERR(txx9_imclk)) { + ret = PTR_ERR(txx9_imclk); + txx9_imclk = NULL; + goto exit; + } + ret = clk_prepare_enable(txx9_imclk); + if (ret) { + clk_put(txx9_imclk); + txx9_imclk = NULL; + goto exit; + } + + res = platform_get_resource(dev, IORESOURCE_MEM, 0); + txx9wdt_reg = devm_ioremap_resource(&dev->dev, res); + if (IS_ERR(txx9wdt_reg)) { + ret = PTR_ERR(txx9wdt_reg); + goto exit; + } + + if (timeout < 1 || timeout > WD_MAX_TIMEOUT) + timeout = TIMER_MARGIN; + txx9wdt.timeout = timeout; + txx9wdt.min_timeout = 1; + txx9wdt.max_timeout = WD_MAX_TIMEOUT; + txx9wdt.parent = &dev->dev; + watchdog_set_nowayout(&txx9wdt, nowayout); + + ret = watchdog_register_device(&txx9wdt); + if (ret) + goto exit; + + pr_info("Hardware Watchdog Timer: timeout=%d sec (max %ld) (nowayout= %d)\n", + timeout, WD_MAX_TIMEOUT, nowayout); + + return 0; +exit: + if (txx9_imclk) { + clk_disable_unprepare(txx9_imclk); + clk_put(txx9_imclk); + } + return ret; +} + +static int __exit txx9wdt_remove(struct platform_device *dev) +{ + watchdog_unregister_device(&txx9wdt); + clk_disable_unprepare(txx9_imclk); + clk_put(txx9_imclk); + return 0; +} + +static void txx9wdt_shutdown(struct platform_device *dev) +{ + txx9wdt_stop(&txx9wdt); +} + +static struct platform_driver txx9wdt_driver = { + .remove = __exit_p(txx9wdt_remove), + .shutdown = txx9wdt_shutdown, + .driver = { + .name = "txx9wdt", + }, +}; + +module_platform_driver_probe(txx9wdt_driver, txx9wdt_probe); + +MODULE_DESCRIPTION("TXx9 Watchdog Driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:txx9wdt"); diff --git a/drivers/watchdog/uniphier_wdt.c b/drivers/watchdog/uniphier_wdt.c new file mode 100644 index 000000000..e20a7a459 --- /dev/null +++ b/drivers/watchdog/uniphier_wdt.c @@ -0,0 +1,259 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Watchdog driver for the UniPhier watchdog timer + * + * (c) Copyright 2014 Panasonic Corporation + * (c) Copyright 2016 Socionext Inc. + * All rights reserved. + */ + +#include <linux/bitops.h> +#include <linux/mfd/syscon.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> +#include <linux/watchdog.h> + +/* WDT timer setting register */ +#define WDTTIMSET 0x3004 +#define WDTTIMSET_PERIOD_MASK (0xf << 0) +#define WDTTIMSET_PERIOD_1_SEC (0x3 << 0) + +/* WDT reset selection register */ +#define WDTRSTSEL 0x3008 +#define WDTRSTSEL_RSTSEL_MASK (0x3 << 0) +#define WDTRSTSEL_RSTSEL_BOTH (0x0 << 0) +#define WDTRSTSEL_RSTSEL_IRQ_ONLY (0x2 << 0) + +/* WDT control register */ +#define WDTCTRL 0x300c +#define WDTCTRL_STATUS BIT(8) +#define WDTCTRL_CLEAR BIT(1) +#define WDTCTRL_ENABLE BIT(0) + +#define SEC_TO_WDTTIMSET_PRD(sec) \ + (ilog2(sec) + WDTTIMSET_PERIOD_1_SEC) + +#define WDTST_TIMEOUT 1000 /* usec */ + +#define WDT_DEFAULT_TIMEOUT 64 /* Default is 64 seconds */ +#define WDT_PERIOD_MIN 1 +#define WDT_PERIOD_MAX 128 + +static unsigned int timeout = 0; +static bool nowayout = WATCHDOG_NOWAYOUT; + +struct uniphier_wdt_dev { + struct watchdog_device wdt_dev; + struct regmap *regmap; +}; + +/* + * UniPhier Watchdog operations + */ +static int uniphier_watchdog_ping(struct watchdog_device *w) +{ + struct uniphier_wdt_dev *wdev = watchdog_get_drvdata(w); + unsigned int val; + int ret; + + /* Clear counter */ + ret = regmap_write_bits(wdev->regmap, WDTCTRL, + WDTCTRL_CLEAR, WDTCTRL_CLEAR); + if (!ret) + /* + * As SoC specification, after clear counter, + * it needs to wait until counter status is 1. + */ + ret = regmap_read_poll_timeout(wdev->regmap, WDTCTRL, val, + (val & WDTCTRL_STATUS), + 0, WDTST_TIMEOUT); + + return ret; +} + +static int __uniphier_watchdog_start(struct regmap *regmap, unsigned int sec) +{ + unsigned int val; + int ret; + + ret = regmap_read_poll_timeout(regmap, WDTCTRL, val, + !(val & WDTCTRL_STATUS), + 0, WDTST_TIMEOUT); + if (ret) + return ret; + + /* Setup period */ + ret = regmap_write(regmap, WDTTIMSET, + SEC_TO_WDTTIMSET_PRD(sec)); + if (ret) + return ret; + + /* Enable and clear watchdog */ + ret = regmap_write(regmap, WDTCTRL, WDTCTRL_ENABLE | WDTCTRL_CLEAR); + if (!ret) + /* + * As SoC specification, after clear counter, + * it needs to wait until counter status is 1. + */ + ret = regmap_read_poll_timeout(regmap, WDTCTRL, val, + (val & WDTCTRL_STATUS), + 0, WDTST_TIMEOUT); + + return ret; +} + +static int __uniphier_watchdog_stop(struct regmap *regmap) +{ + /* Disable and stop watchdog */ + return regmap_write_bits(regmap, WDTCTRL, WDTCTRL_ENABLE, 0); +} + +static int __uniphier_watchdog_restart(struct regmap *regmap, unsigned int sec) +{ + int ret; + + ret = __uniphier_watchdog_stop(regmap); + if (ret) + return ret; + + return __uniphier_watchdog_start(regmap, sec); +} + +static int uniphier_watchdog_start(struct watchdog_device *w) +{ + struct uniphier_wdt_dev *wdev = watchdog_get_drvdata(w); + unsigned int tmp_timeout; + + tmp_timeout = roundup_pow_of_two(w->timeout); + + return __uniphier_watchdog_start(wdev->regmap, tmp_timeout); +} + +static int uniphier_watchdog_stop(struct watchdog_device *w) +{ + struct uniphier_wdt_dev *wdev = watchdog_get_drvdata(w); + + return __uniphier_watchdog_stop(wdev->regmap); +} + +static int uniphier_watchdog_set_timeout(struct watchdog_device *w, + unsigned int t) +{ + struct uniphier_wdt_dev *wdev = watchdog_get_drvdata(w); + unsigned int tmp_timeout; + int ret; + + tmp_timeout = roundup_pow_of_two(t); + if (tmp_timeout == w->timeout) + return 0; + + if (watchdog_active(w)) { + ret = __uniphier_watchdog_restart(wdev->regmap, tmp_timeout); + if (ret) + return ret; + } + + w->timeout = tmp_timeout; + + return 0; +} + +/* + * Kernel Interfaces + */ +static const struct watchdog_info uniphier_wdt_info = { + .identity = "uniphier-wdt", + .options = WDIOF_SETTIMEOUT | + WDIOF_KEEPALIVEPING | + WDIOF_MAGICCLOSE | + WDIOF_OVERHEAT, +}; + +static const struct watchdog_ops uniphier_wdt_ops = { + .owner = THIS_MODULE, + .start = uniphier_watchdog_start, + .stop = uniphier_watchdog_stop, + .ping = uniphier_watchdog_ping, + .set_timeout = uniphier_watchdog_set_timeout, +}; + +static int uniphier_wdt_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct uniphier_wdt_dev *wdev; + struct regmap *regmap; + struct device_node *parent; + int ret; + + wdev = devm_kzalloc(dev, sizeof(*wdev), GFP_KERNEL); + if (!wdev) + return -ENOMEM; + + platform_set_drvdata(pdev, wdev); + + parent = of_get_parent(dev->of_node); /* parent should be syscon node */ + regmap = syscon_node_to_regmap(parent); + of_node_put(parent); + if (IS_ERR(regmap)) + return PTR_ERR(regmap); + + wdev->regmap = regmap; + wdev->wdt_dev.info = &uniphier_wdt_info; + wdev->wdt_dev.ops = &uniphier_wdt_ops; + wdev->wdt_dev.max_timeout = WDT_PERIOD_MAX; + wdev->wdt_dev.min_timeout = WDT_PERIOD_MIN; + wdev->wdt_dev.timeout = WDT_DEFAULT_TIMEOUT; + wdev->wdt_dev.parent = dev; + + watchdog_init_timeout(&wdev->wdt_dev, timeout, dev); + watchdog_set_nowayout(&wdev->wdt_dev, nowayout); + watchdog_stop_on_reboot(&wdev->wdt_dev); + + watchdog_set_drvdata(&wdev->wdt_dev, wdev); + + uniphier_watchdog_stop(&wdev->wdt_dev); + ret = regmap_write(wdev->regmap, WDTRSTSEL, WDTRSTSEL_RSTSEL_BOTH); + if (ret) + return ret; + + ret = devm_watchdog_register_device(dev, &wdev->wdt_dev); + if (ret) + return ret; + + dev_info(dev, "watchdog driver (timeout=%d sec, nowayout=%d)\n", + wdev->wdt_dev.timeout, nowayout); + + return 0; +} + +static const struct of_device_id uniphier_wdt_dt_ids[] = { + { .compatible = "socionext,uniphier-wdt" }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, uniphier_wdt_dt_ids); + +static struct platform_driver uniphier_wdt_driver = { + .probe = uniphier_wdt_probe, + .driver = { + .name = "uniphier-wdt", + .of_match_table = uniphier_wdt_dt_ids, + }, +}; + +module_platform_driver(uniphier_wdt_driver); + +module_param(timeout, uint, 0000); +MODULE_PARM_DESC(timeout, + "Watchdog timeout seconds in power of 2. (0 < timeout < 128, default=" + __MODULE_STRING(WDT_DEFAULT_TIMEOUT) ")"); + +module_param(nowayout, bool, 0000); +MODULE_PARM_DESC(nowayout, + "Watchdog cannot be stopped once started (default=" + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); + +MODULE_AUTHOR("Keiji Hayashibara <hayashibara.keiji@socionext.com>"); +MODULE_DESCRIPTION("UniPhier Watchdog Device Driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/watchdog/ux500_wdt.c b/drivers/watchdog/ux500_wdt.c new file mode 100644 index 000000000..37c084353 --- /dev/null +++ b/drivers/watchdog/ux500_wdt.c @@ -0,0 +1,169 @@ +/* + * Copyright (C) ST-Ericsson SA 2011-2013 + * + * License Terms: GNU General Public License v2 + * + * Author: Mathieu Poirier <mathieu.poirier@linaro.org> for ST-Ericsson + * Author: Jonas Aaberg <jonas.aberg@stericsson.com> for ST-Ericsson + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/moduleparam.h> +#include <linux/err.h> +#include <linux/uaccess.h> +#include <linux/watchdog.h> +#include <linux/platform_device.h> +#include <linux/platform_data/ux500_wdt.h> + +#include <linux/mfd/dbx500-prcmu.h> + +#define WATCHDOG_TIMEOUT 600 /* 10 minutes */ + +#define WATCHDOG_MIN 0 +#define WATCHDOG_MAX28 268435 /* 28 bit resolution in ms == 268435.455 s */ +#define WATCHDOG_MAX32 4294967 /* 32 bit resolution in ms == 4294967.295 s */ + +static unsigned int timeout = WATCHDOG_TIMEOUT; +module_param(timeout, uint, 0); +MODULE_PARM_DESC(timeout, + "Watchdog timeout in seconds. default=" + __MODULE_STRING(WATCHDOG_TIMEOUT) "."); + +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); +MODULE_PARM_DESC(nowayout, + "Watchdog cannot be stopped once started (default=" + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); + +static int ux500_wdt_start(struct watchdog_device *wdd) +{ + return prcmu_enable_a9wdog(PRCMU_WDOG_ALL); +} + +static int ux500_wdt_stop(struct watchdog_device *wdd) +{ + return prcmu_disable_a9wdog(PRCMU_WDOG_ALL); +} + +static int ux500_wdt_keepalive(struct watchdog_device *wdd) +{ + return prcmu_kick_a9wdog(PRCMU_WDOG_ALL); +} + +static int ux500_wdt_set_timeout(struct watchdog_device *wdd, + unsigned int timeout) +{ + ux500_wdt_stop(wdd); + prcmu_load_a9wdog(PRCMU_WDOG_ALL, timeout * 1000); + ux500_wdt_start(wdd); + + return 0; +} + +static const struct watchdog_info ux500_wdt_info = { + .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE, + .identity = "Ux500 WDT", + .firmware_version = 1, +}; + +static const struct watchdog_ops ux500_wdt_ops = { + .owner = THIS_MODULE, + .start = ux500_wdt_start, + .stop = ux500_wdt_stop, + .ping = ux500_wdt_keepalive, + .set_timeout = ux500_wdt_set_timeout, +}; + +static struct watchdog_device ux500_wdt = { + .info = &ux500_wdt_info, + .ops = &ux500_wdt_ops, + .min_timeout = WATCHDOG_MIN, + .max_timeout = WATCHDOG_MAX32, +}; + +static int ux500_wdt_probe(struct platform_device *pdev) +{ + int ret; + struct ux500_wdt_data *pdata = dev_get_platdata(&pdev->dev); + + if (pdata) { + if (pdata->timeout > 0) + timeout = pdata->timeout; + if (pdata->has_28_bits_resolution) + ux500_wdt.max_timeout = WATCHDOG_MAX28; + } + + ux500_wdt.parent = &pdev->dev; + watchdog_set_nowayout(&ux500_wdt, nowayout); + + /* disable auto off on sleep */ + prcmu_config_a9wdog(PRCMU_WDOG_CPU1, false); + + /* set HW initial value */ + prcmu_load_a9wdog(PRCMU_WDOG_ALL, timeout * 1000); + + ret = watchdog_register_device(&ux500_wdt); + if (ret) + return ret; + + dev_info(&pdev->dev, "initialized\n"); + + return 0; +} + +static int ux500_wdt_remove(struct platform_device *dev) +{ + watchdog_unregister_device(&ux500_wdt); + + return 0; +} + +#ifdef CONFIG_PM +static int ux500_wdt_suspend(struct platform_device *pdev, + pm_message_t state) +{ + if (watchdog_active(&ux500_wdt)) { + ux500_wdt_stop(&ux500_wdt); + prcmu_config_a9wdog(PRCMU_WDOG_CPU1, true); + + prcmu_load_a9wdog(PRCMU_WDOG_ALL, timeout * 1000); + ux500_wdt_start(&ux500_wdt); + } + return 0; +} + +static int ux500_wdt_resume(struct platform_device *pdev) +{ + if (watchdog_active(&ux500_wdt)) { + ux500_wdt_stop(&ux500_wdt); + prcmu_config_a9wdog(PRCMU_WDOG_CPU1, false); + + prcmu_load_a9wdog(PRCMU_WDOG_ALL, timeout * 1000); + ux500_wdt_start(&ux500_wdt); + } + return 0; +} +#else +#define ux500_wdt_suspend NULL +#define ux500_wdt_resume NULL +#endif + +static struct platform_driver ux500_wdt_driver = { + .probe = ux500_wdt_probe, + .remove = ux500_wdt_remove, + .suspend = ux500_wdt_suspend, + .resume = ux500_wdt_resume, + .driver = { + .name = "ux500_wdt", + }, +}; + +module_platform_driver(ux500_wdt_driver); + +MODULE_AUTHOR("Jonas Aaberg <jonas.aberg@stericsson.com>"); +MODULE_DESCRIPTION("Ux500 Watchdog Driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:ux500_wdt"); diff --git a/drivers/watchdog/via_wdt.c b/drivers/watchdog/via_wdt.c new file mode 100644 index 000000000..b085ef108 --- /dev/null +++ b/drivers/watchdog/via_wdt.c @@ -0,0 +1,261 @@ +/* + * VIA Chipset Watchdog Driver + * + * Copyright (C) 2011 Sigfox + * License terms: GNU General Public License (GPL) version 2 + * Author: Marc Vertes <marc.vertes@sigfox.com> + * Based on a preliminary version from Harald Welte <HaraldWelte@viatech.com> + * Timer code by Wim Van Sebroeck <wim@iguana.be> + * + * Caveat: PnP must be enabled in BIOS to allow full access to watchdog + * control registers. If not, the watchdog must be configured in BIOS manually. + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/device.h> +#include <linux/io.h> +#include <linux/jiffies.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/timer.h> +#include <linux/watchdog.h> + +/* Configuration registers relative to the pci device */ +#define VIA_WDT_MMIO_BASE 0xe8 /* MMIO region base address */ +#define VIA_WDT_CONF 0xec /* watchdog enable state */ + +/* Relevant bits for the VIA_WDT_CONF register */ +#define VIA_WDT_CONF_ENABLE 0x01 /* 1: enable watchdog */ +#define VIA_WDT_CONF_MMIO 0x02 /* 1: enable watchdog MMIO */ + +/* + * The MMIO region contains the watchog control register and the + * hardware timer counter. + */ +#define VIA_WDT_MMIO_LEN 8 /* MMIO region length in bytes */ +#define VIA_WDT_CTL 0 /* MMIO addr+0: state/control reg. */ +#define VIA_WDT_COUNT 4 /* MMIO addr+4: timer counter reg. */ + +/* Bits for the VIA_WDT_CTL register */ +#define VIA_WDT_RUNNING 0x01 /* 0: stop, 1: running */ +#define VIA_WDT_FIRED 0x02 /* 1: restarted by expired watchdog */ +#define VIA_WDT_PWROFF 0x04 /* 0: reset, 1: poweroff */ +#define VIA_WDT_DISABLED 0x08 /* 1: timer is disabled */ +#define VIA_WDT_TRIGGER 0x80 /* 1: start a new countdown */ + +/* Hardware heartbeat in seconds */ +#define WDT_HW_HEARTBEAT 1 + +/* Timer heartbeat (500ms) */ +#define WDT_HEARTBEAT (HZ/2) /* should be <= ((WDT_HW_HEARTBEAT*HZ)/2) */ + +/* User space timeout in seconds */ +#define WDT_TIMEOUT_MAX 1023 /* approx. 17 min. */ +#define WDT_TIMEOUT 60 +static int timeout = WDT_TIMEOUT; +module_param(timeout, int, 0); +MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds, between 1 and 1023 " + "(default = " __MODULE_STRING(WDT_TIMEOUT) ")"); + +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); +MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started " + "(default = " __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); + +static struct watchdog_device wdt_dev; +static struct resource wdt_res; +static void __iomem *wdt_mem; +static unsigned int mmio; +static void wdt_timer_tick(struct timer_list *unused); +static DEFINE_TIMER(timer, wdt_timer_tick); + /* The timer that pings the watchdog */ +static unsigned long next_heartbeat; /* the next_heartbeat for the timer */ + +static inline void wdt_reset(void) +{ + unsigned int ctl = readl(wdt_mem); + + writel(ctl | VIA_WDT_TRIGGER, wdt_mem); +} + +/* + * Timer tick: the timer will make sure that the watchdog timer hardware + * is being reset in time. The conditions to do this are: + * 1) the watchog timer has been started and /dev/watchdog is open + * and there is still time left before userspace should send the + * next heartbeat/ping. (note: the internal heartbeat is much smaller + * then the external/userspace heartbeat). + * 2) the watchdog timer has been stopped by userspace. + */ +static void wdt_timer_tick(struct timer_list *unused) +{ + if (time_before(jiffies, next_heartbeat) || + (!watchdog_active(&wdt_dev))) { + wdt_reset(); + mod_timer(&timer, jiffies + WDT_HEARTBEAT); + } else + pr_crit("I will reboot your machine !\n"); +} + +static int wdt_ping(struct watchdog_device *wdd) +{ + /* calculate when the next userspace timeout will be */ + next_heartbeat = jiffies + wdd->timeout * HZ; + return 0; +} + +static int wdt_start(struct watchdog_device *wdd) +{ + unsigned int ctl = readl(wdt_mem); + + writel(wdd->timeout, wdt_mem + VIA_WDT_COUNT); + writel(ctl | VIA_WDT_RUNNING | VIA_WDT_TRIGGER, wdt_mem); + wdt_ping(wdd); + mod_timer(&timer, jiffies + WDT_HEARTBEAT); + return 0; +} + +static int wdt_stop(struct watchdog_device *wdd) +{ + unsigned int ctl = readl(wdt_mem); + + writel(ctl & ~VIA_WDT_RUNNING, wdt_mem); + return 0; +} + +static int wdt_set_timeout(struct watchdog_device *wdd, + unsigned int new_timeout) +{ + writel(new_timeout, wdt_mem + VIA_WDT_COUNT); + wdd->timeout = new_timeout; + return 0; +} + +static const struct watchdog_info wdt_info = { + .identity = "VIA watchdog", + .options = WDIOF_CARDRESET | + WDIOF_SETTIMEOUT | + WDIOF_MAGICCLOSE | + WDIOF_KEEPALIVEPING, +}; + +static const struct watchdog_ops wdt_ops = { + .owner = THIS_MODULE, + .start = wdt_start, + .stop = wdt_stop, + .ping = wdt_ping, + .set_timeout = wdt_set_timeout, +}; + +static struct watchdog_device wdt_dev = { + .info = &wdt_info, + .ops = &wdt_ops, + .min_timeout = 1, + .max_timeout = WDT_TIMEOUT_MAX, +}; + +static int wdt_probe(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + unsigned char conf; + int ret = -ENODEV; + + if (pci_enable_device(pdev)) { + dev_err(&pdev->dev, "cannot enable PCI device\n"); + return -ENODEV; + } + + /* + * Allocate a MMIO region which contains watchdog control register + * and counter, then configure the watchdog to use this region. + * This is possible only if PnP is properly enabled in BIOS. + * If not, the watchdog must be configured in BIOS manually. + */ + if (allocate_resource(&iomem_resource, &wdt_res, VIA_WDT_MMIO_LEN, + 0xf0000000, 0xffffff00, 0xff, NULL, NULL)) { + dev_err(&pdev->dev, "MMIO allocation failed\n"); + goto err_out_disable_device; + } + + pci_write_config_dword(pdev, VIA_WDT_MMIO_BASE, wdt_res.start); + pci_read_config_byte(pdev, VIA_WDT_CONF, &conf); + conf |= VIA_WDT_CONF_ENABLE | VIA_WDT_CONF_MMIO; + pci_write_config_byte(pdev, VIA_WDT_CONF, conf); + + pci_read_config_dword(pdev, VIA_WDT_MMIO_BASE, &mmio); + if (mmio) { + dev_info(&pdev->dev, "VIA Chipset watchdog MMIO: %x\n", mmio); + } else { + dev_err(&pdev->dev, "MMIO setting failed. Check BIOS.\n"); + goto err_out_resource; + } + + if (!request_mem_region(mmio, VIA_WDT_MMIO_LEN, "via_wdt")) { + dev_err(&pdev->dev, "MMIO region busy\n"); + goto err_out_resource; + } + + wdt_mem = ioremap(mmio, VIA_WDT_MMIO_LEN); + if (wdt_mem == NULL) { + dev_err(&pdev->dev, "cannot remap VIA wdt MMIO registers\n"); + goto err_out_release; + } + + if (timeout < 1 || timeout > WDT_TIMEOUT_MAX) + timeout = WDT_TIMEOUT; + + wdt_dev.timeout = timeout; + wdt_dev.parent = &pdev->dev; + watchdog_set_nowayout(&wdt_dev, nowayout); + if (readl(wdt_mem) & VIA_WDT_FIRED) + wdt_dev.bootstatus |= WDIOF_CARDRESET; + + ret = watchdog_register_device(&wdt_dev); + if (ret) + goto err_out_iounmap; + + /* start triggering, in case of watchdog already enabled by BIOS */ + mod_timer(&timer, jiffies + WDT_HEARTBEAT); + return 0; + +err_out_iounmap: + iounmap(wdt_mem); +err_out_release: + release_mem_region(mmio, VIA_WDT_MMIO_LEN); +err_out_resource: + release_resource(&wdt_res); +err_out_disable_device: + pci_disable_device(pdev); + return ret; +} + +static void wdt_remove(struct pci_dev *pdev) +{ + watchdog_unregister_device(&wdt_dev); + del_timer_sync(&timer); + iounmap(wdt_mem); + release_mem_region(mmio, VIA_WDT_MMIO_LEN); + release_resource(&wdt_res); + pci_disable_device(pdev); +} + +static const struct pci_device_id wdt_pci_table[] = { + { PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_CX700) }, + { PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_VX800) }, + { PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_VX855) }, + { 0 } +}; + +static struct pci_driver wdt_driver = { + .name = "via_wdt", + .id_table = wdt_pci_table, + .probe = wdt_probe, + .remove = wdt_remove, +}; + +module_pci_driver(wdt_driver); + +MODULE_AUTHOR("Marc Vertes"); +MODULE_DESCRIPTION("Driver for watchdog timer on VIA chipset"); +MODULE_LICENSE("GPL"); diff --git a/drivers/watchdog/w83627hf_wdt.c b/drivers/watchdog/w83627hf_wdt.c new file mode 100644 index 000000000..4b9365d4d --- /dev/null +++ b/drivers/watchdog/w83627hf_wdt.c @@ -0,0 +1,504 @@ +/* + * w83627hf/thf WDT driver + * + * (c) Copyright 2013 Guenter Roeck + * converted to watchdog infrastructure + * + * (c) Copyright 2007 Vlad Drukker <vlad@storewiz.com> + * added support for W83627THF. + * + * (c) Copyright 2003,2007 Pádraig Brady <P@draigBrady.com> + * + * Based on advantechwdt.c which is based on wdt.c. + * Original copyright messages: + * + * (c) Copyright 2000-2001 Marek Michalkiewicz <marekm@linux.org.pl> + * + * (c) Copyright 1996 Alan Cox <alan@lxorguk.ukuu.org.uk>, + * All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * Neither Alan Cox nor CymruNet Ltd. admit liability nor provide + * warranty for any of this software. This material is provided + * "AS-IS" and at no charge. + * + * (c) Copyright 1995 Alan Cox <alan@lxorguk.ukuu.org.uk> + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/types.h> +#include <linux/watchdog.h> +#include <linux/ioport.h> +#include <linux/init.h> +#include <linux/io.h> + +#define WATCHDOG_NAME "w83627hf/thf/hg/dhg WDT" +#define WATCHDOG_TIMEOUT 60 /* 60 sec default timeout */ + +static int wdt_io; +static int cr_wdt_timeout; /* WDT timeout register */ +static int cr_wdt_control; /* WDT control register */ +static int cr_wdt_csr; /* WDT control & status register */ + +enum chips { w83627hf, w83627s, w83697hf, w83697ug, w83637hf, w83627thf, + w83687thf, w83627ehf, w83627dhg, w83627uhg, w83667hg, w83627dhg_p, + w83667hg_b, nct6775, nct6776, nct6779, nct6791, nct6792, nct6793, + nct6795, nct6796, nct6102 }; + +static int timeout; /* in seconds */ +module_param(timeout, int, 0); +MODULE_PARM_DESC(timeout, + "Watchdog timeout in seconds. 1 <= timeout <= 255, default=" + __MODULE_STRING(WATCHDOG_TIMEOUT) "."); + +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); +MODULE_PARM_DESC(nowayout, + "Watchdog cannot be stopped once started (default=" + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); + +static int early_disable; +module_param(early_disable, int, 0); +MODULE_PARM_DESC(early_disable, "Disable watchdog at boot time (default=0)"); + +/* + * Kernel methods. + */ + +#define WDT_EFER (wdt_io+0) /* Extended Function Enable Registers */ +#define WDT_EFIR (wdt_io+0) /* Extended Function Index Register + (same as EFER) */ +#define WDT_EFDR (WDT_EFIR+1) /* Extended Function Data Register */ + +#define W83627HF_LD_WDT 0x08 + +#define W83627HF_ID 0x52 +#define W83627S_ID 0x59 +#define W83697HF_ID 0x60 +#define W83697UG_ID 0x68 +#define W83637HF_ID 0x70 +#define W83627THF_ID 0x82 +#define W83687THF_ID 0x85 +#define W83627EHF_ID 0x88 +#define W83627DHG_ID 0xa0 +#define W83627UHG_ID 0xa2 +#define W83667HG_ID 0xa5 +#define W83627DHG_P_ID 0xb0 +#define W83667HG_B_ID 0xb3 +#define NCT6775_ID 0xb4 +#define NCT6776_ID 0xc3 +#define NCT6102_ID 0xc4 +#define NCT6779_ID 0xc5 +#define NCT6791_ID 0xc8 +#define NCT6792_ID 0xc9 +#define NCT6793_ID 0xd1 +#define NCT6795_ID 0xd3 +#define NCT6796_ID 0xd4 /* also NCT9697D, NCT9698D */ + +#define W83627HF_WDT_TIMEOUT 0xf6 +#define W83697HF_WDT_TIMEOUT 0xf4 +#define NCT6102D_WDT_TIMEOUT 0xf1 + +#define W83627HF_WDT_CONTROL 0xf5 +#define W83697HF_WDT_CONTROL 0xf3 +#define NCT6102D_WDT_CONTROL 0xf0 + +#define W836X7HF_WDT_CSR 0xf7 +#define NCT6102D_WDT_CSR 0xf2 + +static void superio_outb(int reg, int val) +{ + outb(reg, WDT_EFER); + outb(val, WDT_EFDR); +} + +static inline int superio_inb(int reg) +{ + outb(reg, WDT_EFER); + return inb(WDT_EFDR); +} + +static int superio_enter(void) +{ + if (!request_muxed_region(wdt_io, 2, WATCHDOG_NAME)) + return -EBUSY; + + outb_p(0x87, WDT_EFER); /* Enter extended function mode */ + outb_p(0x87, WDT_EFER); /* Again according to manual */ + + return 0; +} + +static void superio_select(int ld) +{ + superio_outb(0x07, ld); +} + +static void superio_exit(void) +{ + outb_p(0xAA, WDT_EFER); /* Leave extended function mode */ + release_region(wdt_io, 2); +} + +static int w83627hf_init(struct watchdog_device *wdog, enum chips chip) +{ + int ret; + unsigned char t; + + ret = superio_enter(); + if (ret) + return ret; + + superio_select(W83627HF_LD_WDT); + + /* set CR30 bit 0 to activate GPIO2 */ + t = superio_inb(0x30); + if (!(t & 0x01)) + superio_outb(0x30, t | 0x01); + + switch (chip) { + case w83627hf: + case w83627s: + t = superio_inb(0x2B) & ~0x10; + superio_outb(0x2B, t); /* set GPIO24 to WDT0 */ + break; + case w83697hf: + /* Set pin 119 to WDTO# mode (= CR29, WDT0) */ + t = superio_inb(0x29) & ~0x60; + t |= 0x20; + superio_outb(0x29, t); + break; + case w83697ug: + /* Set pin 118 to WDTO# mode */ + t = superio_inb(0x2b) & ~0x04; + superio_outb(0x2b, t); + break; + case w83627thf: + t = (superio_inb(0x2B) & ~0x08) | 0x04; + superio_outb(0x2B, t); /* set GPIO3 to WDT0 */ + break; + case w83627dhg: + case w83627dhg_p: + t = superio_inb(0x2D) & ~0x01; /* PIN77 -> WDT0# */ + superio_outb(0x2D, t); /* set GPIO5 to WDT0 */ + t = superio_inb(cr_wdt_control); + t |= 0x02; /* enable the WDTO# output low pulse + * to the KBRST# pin */ + superio_outb(cr_wdt_control, t); + break; + case w83637hf: + break; + case w83687thf: + t = superio_inb(0x2C) & ~0x80; /* PIN47 -> WDT0# */ + superio_outb(0x2C, t); + break; + case w83627ehf: + case w83627uhg: + case w83667hg: + case w83667hg_b: + case nct6775: + case nct6776: + case nct6779: + case nct6791: + case nct6792: + case nct6793: + case nct6795: + case nct6796: + case nct6102: + /* + * These chips have a fixed WDTO# output pin (W83627UHG), + * or support more than one WDTO# output pin. + * Don't touch its configuration, and hope the BIOS + * does the right thing. + */ + t = superio_inb(cr_wdt_control); + t |= 0x02; /* enable the WDTO# output low pulse + * to the KBRST# pin */ + superio_outb(cr_wdt_control, t); + break; + default: + break; + } + + t = superio_inb(cr_wdt_timeout); + if (t != 0) { + if (early_disable) { + pr_warn("Stopping previously enabled watchdog until userland kicks in\n"); + superio_outb(cr_wdt_timeout, 0); + } else { + pr_info("Watchdog already running. Resetting timeout to %d sec\n", + wdog->timeout); + superio_outb(cr_wdt_timeout, wdog->timeout); + } + } + + /* set second mode & disable keyboard turning off watchdog */ + t = superio_inb(cr_wdt_control) & ~0x0C; + superio_outb(cr_wdt_control, t); + + /* reset trigger, disable keyboard & mouse turning off watchdog */ + t = superio_inb(cr_wdt_csr) & ~0xD0; + superio_outb(cr_wdt_csr, t); + + superio_exit(); + + return 0; +} + +static int wdt_set_time(unsigned int timeout) +{ + int ret; + + ret = superio_enter(); + if (ret) + return ret; + + superio_select(W83627HF_LD_WDT); + superio_outb(cr_wdt_timeout, timeout); + superio_exit(); + + return 0; +} + +static int wdt_start(struct watchdog_device *wdog) +{ + return wdt_set_time(wdog->timeout); +} + +static int wdt_stop(struct watchdog_device *wdog) +{ + return wdt_set_time(0); +} + +static int wdt_set_timeout(struct watchdog_device *wdog, unsigned int timeout) +{ + wdog->timeout = timeout; + + return 0; +} + +static unsigned int wdt_get_time(struct watchdog_device *wdog) +{ + unsigned int timeleft; + int ret; + + ret = superio_enter(); + if (ret) + return 0; + + superio_select(W83627HF_LD_WDT); + timeleft = superio_inb(cr_wdt_timeout); + superio_exit(); + + return timeleft; +} + +/* + * Kernel Interfaces + */ + +static const struct watchdog_info wdt_info = { + .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE, + .identity = "W83627HF Watchdog", +}; + +static const struct watchdog_ops wdt_ops = { + .owner = THIS_MODULE, + .start = wdt_start, + .stop = wdt_stop, + .set_timeout = wdt_set_timeout, + .get_timeleft = wdt_get_time, +}; + +static struct watchdog_device wdt_dev = { + .info = &wdt_info, + .ops = &wdt_ops, + .timeout = WATCHDOG_TIMEOUT, + .min_timeout = 1, + .max_timeout = 255, +}; + +/* + * The WDT needs to learn about soft shutdowns in order to + * turn the timebomb registers off. + */ + +static int wdt_find(int addr) +{ + u8 val; + int ret; + + cr_wdt_timeout = W83627HF_WDT_TIMEOUT; + cr_wdt_control = W83627HF_WDT_CONTROL; + cr_wdt_csr = W836X7HF_WDT_CSR; + + ret = superio_enter(); + if (ret) + return ret; + superio_select(W83627HF_LD_WDT); + val = superio_inb(0x20); + switch (val) { + case W83627HF_ID: + ret = w83627hf; + break; + case W83627S_ID: + ret = w83627s; + break; + case W83697HF_ID: + ret = w83697hf; + cr_wdt_timeout = W83697HF_WDT_TIMEOUT; + cr_wdt_control = W83697HF_WDT_CONTROL; + break; + case W83697UG_ID: + ret = w83697ug; + cr_wdt_timeout = W83697HF_WDT_TIMEOUT; + cr_wdt_control = W83697HF_WDT_CONTROL; + break; + case W83637HF_ID: + ret = w83637hf; + break; + case W83627THF_ID: + ret = w83627thf; + break; + case W83687THF_ID: + ret = w83687thf; + break; + case W83627EHF_ID: + ret = w83627ehf; + break; + case W83627DHG_ID: + ret = w83627dhg; + break; + case W83627DHG_P_ID: + ret = w83627dhg_p; + break; + case W83627UHG_ID: + ret = w83627uhg; + break; + case W83667HG_ID: + ret = w83667hg; + break; + case W83667HG_B_ID: + ret = w83667hg_b; + break; + case NCT6775_ID: + ret = nct6775; + break; + case NCT6776_ID: + ret = nct6776; + break; + case NCT6779_ID: + ret = nct6779; + break; + case NCT6791_ID: + ret = nct6791; + break; + case NCT6792_ID: + ret = nct6792; + break; + case NCT6793_ID: + ret = nct6793; + break; + case NCT6795_ID: + ret = nct6795; + break; + case NCT6796_ID: + ret = nct6796; + break; + case NCT6102_ID: + ret = nct6102; + cr_wdt_timeout = NCT6102D_WDT_TIMEOUT; + cr_wdt_control = NCT6102D_WDT_CONTROL; + cr_wdt_csr = NCT6102D_WDT_CSR; + break; + case 0xff: + ret = -ENODEV; + break; + default: + ret = -ENODEV; + pr_err("Unsupported chip ID: 0x%02x\n", val); + break; + } + superio_exit(); + return ret; +} + +static int __init wdt_init(void) +{ + int ret; + int chip; + static const char * const chip_name[] = { + "W83627HF", + "W83627S", + "W83697HF", + "W83697UG", + "W83637HF", + "W83627THF", + "W83687THF", + "W83627EHF", + "W83627DHG", + "W83627UHG", + "W83667HG", + "W83667DHG-P", + "W83667HG-B", + "NCT6775", + "NCT6776", + "NCT6779", + "NCT6791", + "NCT6792", + "NCT6793", + "NCT6795", + "NCT6796", + "NCT6102", + }; + + wdt_io = 0x2e; + chip = wdt_find(0x2e); + if (chip < 0) { + wdt_io = 0x4e; + chip = wdt_find(0x4e); + if (chip < 0) + return chip; + } + + pr_info("WDT driver for %s Super I/O chip initialising\n", + chip_name[chip]); + + watchdog_init_timeout(&wdt_dev, timeout, NULL); + watchdog_set_nowayout(&wdt_dev, nowayout); + watchdog_stop_on_reboot(&wdt_dev); + + ret = w83627hf_init(&wdt_dev, chip); + if (ret) { + pr_err("failed to initialize watchdog (err=%d)\n", ret); + return ret; + } + + ret = watchdog_register_device(&wdt_dev); + if (ret) + return ret; + + pr_info("initialized. timeout=%d sec (nowayout=%d)\n", + wdt_dev.timeout, nowayout); + + return ret; +} + +static void __exit wdt_exit(void) +{ + watchdog_unregister_device(&wdt_dev); +} + +module_init(wdt_init); +module_exit(wdt_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Pádraig Brady <P@draigBrady.com>"); +MODULE_DESCRIPTION("w83627hf/thf WDT driver"); diff --git a/drivers/watchdog/w83877f_wdt.c b/drivers/watchdog/w83877f_wdt.c new file mode 100644 index 000000000..ec4641fc2 --- /dev/null +++ b/drivers/watchdog/w83877f_wdt.c @@ -0,0 +1,408 @@ +/* + * W83877F Computer Watchdog Timer driver + * + * Based on acquirewdt.c by Alan Cox, + * and sbc60xxwdt.c by Jakob Oestergaard <jakob@unthought.net> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * The authors do NOT admit liability nor provide warranty for + * any of this software. This material is provided "AS-IS" in + * the hope that it may be useful for others. + * + * (c) Copyright 2001 Scott Jennings <linuxdrivers@oro.net> + * + * 4/19 - 2001 [Initial revision] + * 9/27 - 2001 Added spinlocking + * 4/12 - 2002 [rob@osinvestor.com] Eliminate extra comments + * Eliminate fop_read + * Eliminate extra spin_unlock + * Added KERN_* tags to printks + * add CONFIG_WATCHDOG_NOWAYOUT support + * fix possible wdt_is_open race + * changed watchdog_info to correctly reflect what + * the driver offers + * added WDIOC_GETSTATUS, WDIOC_GETBOOTSTATUS, + * WDIOC_SETTIMEOUT, + * WDIOC_GETTIMEOUT, and WDIOC_SETOPTIONS ioctls + * 09/8 - 2003 [wim@iguana.be] cleanup of trailing spaces + * added extra printk's for startup problems + * use module_param + * made timeout (the emulated heartbeat) a + * module_param + * made the keepalive ping an internal subroutine + * + * This WDT driver is different from most other Linux WDT + * drivers in that the driver will ping the watchdog by itself, + * because this particular WDT has a very short timeout (1.6 + * seconds) and it would be insane to count on any userspace + * daemon always getting scheduled within that time frame. + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/types.h> +#include <linux/timer.h> +#include <linux/jiffies.h> +#include <linux/miscdevice.h> +#include <linux/watchdog.h> +#include <linux/fs.h> +#include <linux/ioport.h> +#include <linux/notifier.h> +#include <linux/reboot.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/uaccess.h> + +#define OUR_NAME "w83877f_wdt" + +#define ENABLE_W83877F_PORT 0x3F0 +#define ENABLE_W83877F 0x87 +#define DISABLE_W83877F 0xAA +#define WDT_PING 0x443 +#define WDT_REGISTER 0x14 +#define WDT_ENABLE 0x9C +#define WDT_DISABLE 0x8C + +/* + * The W83877F seems to be fixed at 1.6s timeout (at least on the + * EMACS PC-104 board I'm using). If we reset the watchdog every + * ~250ms we should be safe. */ + +#define WDT_INTERVAL (HZ/4+1) + +/* + * We must not require too good response from the userspace daemon. + * Here we require the userspace daemon to send us a heartbeat + * char to /dev/watchdog every 30 seconds. + */ + +#define WATCHDOG_TIMEOUT 30 /* 30 sec default timeout */ +/* in seconds, will be multiplied by HZ to get seconds to wait for a ping */ +static int timeout = WATCHDOG_TIMEOUT; +module_param(timeout, int, 0); +MODULE_PARM_DESC(timeout, + "Watchdog timeout in seconds. (1<=timeout<=3600, default=" + __MODULE_STRING(WATCHDOG_TIMEOUT) ")"); + + +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); +MODULE_PARM_DESC(nowayout, + "Watchdog cannot be stopped once started (default=" + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); + +static void wdt_timer_ping(struct timer_list *); +static DEFINE_TIMER(timer, wdt_timer_ping); +static unsigned long next_heartbeat; +static unsigned long wdt_is_open; +static char wdt_expect_close; +static DEFINE_SPINLOCK(wdt_spinlock); + +/* + * Whack the dog + */ + +static void wdt_timer_ping(struct timer_list *unused) +{ + /* If we got a heartbeat pulse within the WDT_US_INTERVAL + * we agree to ping the WDT + */ + if (time_before(jiffies, next_heartbeat)) { + /* Ping the WDT */ + spin_lock(&wdt_spinlock); + + /* Ping the WDT by reading from WDT_PING */ + inb_p(WDT_PING); + + /* Re-set the timer interval */ + mod_timer(&timer, jiffies + WDT_INTERVAL); + + spin_unlock(&wdt_spinlock); + + } else + pr_warn("Heartbeat lost! Will not ping the watchdog\n"); +} + +/* + * Utility routines + */ + +static void wdt_change(int writeval) +{ + unsigned long flags; + spin_lock_irqsave(&wdt_spinlock, flags); + + /* buy some time */ + inb_p(WDT_PING); + + /* make W83877F available */ + outb_p(ENABLE_W83877F, ENABLE_W83877F_PORT); + outb_p(ENABLE_W83877F, ENABLE_W83877F_PORT); + + /* enable watchdog */ + outb_p(WDT_REGISTER, ENABLE_W83877F_PORT); + outb_p(writeval, ENABLE_W83877F_PORT+1); + + /* lock the W8387FF away */ + outb_p(DISABLE_W83877F, ENABLE_W83877F_PORT); + + spin_unlock_irqrestore(&wdt_spinlock, flags); +} + +static void wdt_startup(void) +{ + next_heartbeat = jiffies + (timeout * HZ); + + /* Start the timer */ + mod_timer(&timer, jiffies + WDT_INTERVAL); + + wdt_change(WDT_ENABLE); + + pr_info("Watchdog timer is now enabled\n"); +} + +static void wdt_turnoff(void) +{ + /* Stop the timer */ + del_timer_sync(&timer); + + wdt_change(WDT_DISABLE); + + pr_info("Watchdog timer is now disabled...\n"); +} + +static void wdt_keepalive(void) +{ + /* user land ping */ + next_heartbeat = jiffies + (timeout * HZ); +} + +/* + * /dev/watchdog handling + */ + +static ssize_t fop_write(struct file *file, const char __user *buf, + size_t count, loff_t *ppos) +{ + /* See if we got the magic character 'V' and reload the timer */ + if (count) { + if (!nowayout) { + size_t ofs; + + /* note: just in case someone wrote the magic + character five months ago... */ + wdt_expect_close = 0; + + /* scan to see whether or not we got the + magic character */ + for (ofs = 0; ofs != count; ofs++) { + char c; + if (get_user(c, buf + ofs)) + return -EFAULT; + if (c == 'V') + wdt_expect_close = 42; + } + } + + /* someone wrote to us, we should restart timer */ + wdt_keepalive(); + } + return count; +} + +static int fop_open(struct inode *inode, struct file *file) +{ + /* Just in case we're already talking to someone... */ + if (test_and_set_bit(0, &wdt_is_open)) + return -EBUSY; + + /* Good, fire up the show */ + wdt_startup(); + return nonseekable_open(inode, file); +} + +static int fop_close(struct inode *inode, struct file *file) +{ + if (wdt_expect_close == 42) + wdt_turnoff(); + else { + del_timer(&timer); + pr_crit("device file closed unexpectedly. Will not stop the WDT!\n"); + } + clear_bit(0, &wdt_is_open); + wdt_expect_close = 0; + return 0; +} + +static long fop_ioctl(struct file *file, unsigned int cmd, unsigned long arg) +{ + void __user *argp = (void __user *)arg; + int __user *p = argp; + static const struct watchdog_info ident = { + .options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT + | WDIOF_MAGICCLOSE, + .firmware_version = 1, + .identity = "W83877F", + }; + + switch (cmd) { + case WDIOC_GETSUPPORT: + return copy_to_user(argp, &ident, sizeof(ident)) ? -EFAULT : 0; + case WDIOC_GETSTATUS: + case WDIOC_GETBOOTSTATUS: + return put_user(0, p); + case WDIOC_SETOPTIONS: + { + int new_options, retval = -EINVAL; + + if (get_user(new_options, p)) + return -EFAULT; + + if (new_options & WDIOS_DISABLECARD) { + wdt_turnoff(); + retval = 0; + } + + if (new_options & WDIOS_ENABLECARD) { + wdt_startup(); + retval = 0; + } + + return retval; + } + case WDIOC_KEEPALIVE: + wdt_keepalive(); + return 0; + case WDIOC_SETTIMEOUT: + { + int new_timeout; + + if (get_user(new_timeout, p)) + return -EFAULT; + + /* arbitrary upper limit */ + if (new_timeout < 1 || new_timeout > 3600) + return -EINVAL; + + timeout = new_timeout; + wdt_keepalive(); + /* Fall through */ + } + case WDIOC_GETTIMEOUT: + return put_user(timeout, p); + default: + return -ENOTTY; + } +} + +static const struct file_operations wdt_fops = { + .owner = THIS_MODULE, + .llseek = no_llseek, + .write = fop_write, + .open = fop_open, + .release = fop_close, + .unlocked_ioctl = fop_ioctl, +}; + +static struct miscdevice wdt_miscdev = { + .minor = WATCHDOG_MINOR, + .name = "watchdog", + .fops = &wdt_fops, +}; + +/* + * Notifier for system down + */ + +static int wdt_notify_sys(struct notifier_block *this, unsigned long code, + void *unused) +{ + if (code == SYS_DOWN || code == SYS_HALT) + wdt_turnoff(); + return NOTIFY_DONE; +} + +/* + * The WDT needs to learn about soft shutdowns in order to + * turn the timebomb registers off. + */ + +static struct notifier_block wdt_notifier = { + .notifier_call = wdt_notify_sys, +}; + +static void __exit w83877f_wdt_unload(void) +{ + wdt_turnoff(); + + /* Deregister */ + misc_deregister(&wdt_miscdev); + + unregister_reboot_notifier(&wdt_notifier); + release_region(WDT_PING, 1); + release_region(ENABLE_W83877F_PORT, 2); +} + +static int __init w83877f_wdt_init(void) +{ + int rc = -EBUSY; + + if (timeout < 1 || timeout > 3600) { /* arbitrary upper limit */ + timeout = WATCHDOG_TIMEOUT; + pr_info("timeout value must be 1 <= x <= 3600, using %d\n", + timeout); + } + + if (!request_region(ENABLE_W83877F_PORT, 2, "W83877F WDT")) { + pr_err("I/O address 0x%04x already in use\n", + ENABLE_W83877F_PORT); + rc = -EIO; + goto err_out; + } + + if (!request_region(WDT_PING, 1, "W8387FF WDT")) { + pr_err("I/O address 0x%04x already in use\n", WDT_PING); + rc = -EIO; + goto err_out_region1; + } + + rc = register_reboot_notifier(&wdt_notifier); + if (rc) { + pr_err("cannot register reboot notifier (err=%d)\n", rc); + goto err_out_region2; + } + + rc = misc_register(&wdt_miscdev); + if (rc) { + pr_err("cannot register miscdev on minor=%d (err=%d)\n", + wdt_miscdev.minor, rc); + goto err_out_reboot; + } + + pr_info("WDT driver for W83877F initialised. timeout=%d sec (nowayout=%d)\n", + timeout, nowayout); + + return 0; + +err_out_reboot: + unregister_reboot_notifier(&wdt_notifier); +err_out_region2: + release_region(WDT_PING, 1); +err_out_region1: + release_region(ENABLE_W83877F_PORT, 2); +err_out: + return rc; +} + +module_init(w83877f_wdt_init); +module_exit(w83877f_wdt_unload); + +MODULE_AUTHOR("Scott and Bill Jennings"); +MODULE_DESCRIPTION("Driver for watchdog timer in w83877f chip"); +MODULE_LICENSE("GPL"); diff --git a/drivers/watchdog/w83977f_wdt.c b/drivers/watchdog/w83977f_wdt.c new file mode 100644 index 000000000..672b61a7f --- /dev/null +++ b/drivers/watchdog/w83977f_wdt.c @@ -0,0 +1,529 @@ +/* + * W83977F Watchdog Timer Driver for Winbond W83977F I/O Chip + * + * (c) Copyright 2005 Jose Goncalves <jose.goncalves@inov.pt> + * + * Based on w83877f_wdt.c by Scott Jennings, + * and wdt977.c by Woody Suwalski + * + * ----------------------- + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/types.h> +#include <linux/kernel.h> +#include <linux/fs.h> +#include <linux/miscdevice.h> +#include <linux/init.h> +#include <linux/ioport.h> +#include <linux/watchdog.h> +#include <linux/notifier.h> +#include <linux/reboot.h> +#include <linux/uaccess.h> +#include <linux/io.h> + + +#define WATCHDOG_VERSION "1.00" +#define WATCHDOG_NAME "W83977F WDT" + +#define IO_INDEX_PORT 0x3F0 +#define IO_DATA_PORT (IO_INDEX_PORT+1) + +#define UNLOCK_DATA 0x87 +#define LOCK_DATA 0xAA +#define DEVICE_REGISTER 0x07 + +#define DEFAULT_TIMEOUT 45 /* default timeout in seconds */ + +static int timeout = DEFAULT_TIMEOUT; +static int timeoutW; /* timeout in watchdog counter units */ +static unsigned long timer_alive; +static int testmode; +static char expect_close; +static DEFINE_SPINLOCK(spinlock); + +module_param(timeout, int, 0); +MODULE_PARM_DESC(timeout, + "Watchdog timeout in seconds (15..7635), default=" + __MODULE_STRING(DEFAULT_TIMEOUT) ")"); +module_param(testmode, int, 0); +MODULE_PARM_DESC(testmode, "Watchdog testmode (1 = no reboot), default=0"); + +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); +MODULE_PARM_DESC(nowayout, + "Watchdog cannot be stopped once started (default=" + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); + +/* + * Start the watchdog + */ + +static int wdt_start(void) +{ + unsigned long flags; + + spin_lock_irqsave(&spinlock, flags); + + /* Unlock the SuperIO chip */ + outb_p(UNLOCK_DATA, IO_INDEX_PORT); + outb_p(UNLOCK_DATA, IO_INDEX_PORT); + + /* + * Select device Aux2 (device=8) to set watchdog regs F2, F3 and F4. + * F2 has the timeout in watchdog counter units. + * F3 is set to enable watchdog LED blink at timeout. + * F4 is used to just clear the TIMEOUT'ed state (bit 0). + */ + outb_p(DEVICE_REGISTER, IO_INDEX_PORT); + outb_p(0x08, IO_DATA_PORT); + outb_p(0xF2, IO_INDEX_PORT); + outb_p(timeoutW, IO_DATA_PORT); + outb_p(0xF3, IO_INDEX_PORT); + outb_p(0x08, IO_DATA_PORT); + outb_p(0xF4, IO_INDEX_PORT); + outb_p(0x00, IO_DATA_PORT); + + /* Set device Aux2 active */ + outb_p(0x30, IO_INDEX_PORT); + outb_p(0x01, IO_DATA_PORT); + + /* + * Select device Aux1 (dev=7) to set GP16 as the watchdog output + * (in reg E6) and GP13 as the watchdog LED output (in reg E3). + * Map GP16 at pin 119. + * In test mode watch the bit 0 on F4 to indicate "triggered" or + * check watchdog LED on SBC. + */ + outb_p(DEVICE_REGISTER, IO_INDEX_PORT); + outb_p(0x07, IO_DATA_PORT); + if (!testmode) { + unsigned pin_map; + + outb_p(0xE6, IO_INDEX_PORT); + outb_p(0x0A, IO_DATA_PORT); + outb_p(0x2C, IO_INDEX_PORT); + pin_map = inb_p(IO_DATA_PORT); + pin_map |= 0x10; + pin_map &= ~(0x20); + outb_p(0x2C, IO_INDEX_PORT); + outb_p(pin_map, IO_DATA_PORT); + } + outb_p(0xE3, IO_INDEX_PORT); + outb_p(0x08, IO_DATA_PORT); + + /* Set device Aux1 active */ + outb_p(0x30, IO_INDEX_PORT); + outb_p(0x01, IO_DATA_PORT); + + /* Lock the SuperIO chip */ + outb_p(LOCK_DATA, IO_INDEX_PORT); + + spin_unlock_irqrestore(&spinlock, flags); + + pr_info("activated\n"); + + return 0; +} + +/* + * Stop the watchdog + */ + +static int wdt_stop(void) +{ + unsigned long flags; + + spin_lock_irqsave(&spinlock, flags); + + /* Unlock the SuperIO chip */ + outb_p(UNLOCK_DATA, IO_INDEX_PORT); + outb_p(UNLOCK_DATA, IO_INDEX_PORT); + + /* + * Select device Aux2 (device=8) to set watchdog regs F2, F3 and F4. + * F2 is reset to its default value (watchdog timer disabled). + * F3 is reset to its default state. + * F4 clears the TIMEOUT'ed state (bit 0) - back to default. + */ + outb_p(DEVICE_REGISTER, IO_INDEX_PORT); + outb_p(0x08, IO_DATA_PORT); + outb_p(0xF2, IO_INDEX_PORT); + outb_p(0xFF, IO_DATA_PORT); + outb_p(0xF3, IO_INDEX_PORT); + outb_p(0x00, IO_DATA_PORT); + outb_p(0xF4, IO_INDEX_PORT); + outb_p(0x00, IO_DATA_PORT); + outb_p(0xF2, IO_INDEX_PORT); + outb_p(0x00, IO_DATA_PORT); + + /* + * Select device Aux1 (dev=7) to set GP16 (in reg E6) and + * Gp13 (in reg E3) as inputs. + */ + outb_p(DEVICE_REGISTER, IO_INDEX_PORT); + outb_p(0x07, IO_DATA_PORT); + if (!testmode) { + outb_p(0xE6, IO_INDEX_PORT); + outb_p(0x01, IO_DATA_PORT); + } + outb_p(0xE3, IO_INDEX_PORT); + outb_p(0x01, IO_DATA_PORT); + + /* Lock the SuperIO chip */ + outb_p(LOCK_DATA, IO_INDEX_PORT); + + spin_unlock_irqrestore(&spinlock, flags); + + pr_info("shutdown\n"); + + return 0; +} + +/* + * Send a keepalive ping to the watchdog + * This is done by simply re-writing the timeout to reg. 0xF2 + */ + +static int wdt_keepalive(void) +{ + unsigned long flags; + + spin_lock_irqsave(&spinlock, flags); + + /* Unlock the SuperIO chip */ + outb_p(UNLOCK_DATA, IO_INDEX_PORT); + outb_p(UNLOCK_DATA, IO_INDEX_PORT); + + /* Select device Aux2 (device=8) to kick watchdog reg F2 */ + outb_p(DEVICE_REGISTER, IO_INDEX_PORT); + outb_p(0x08, IO_DATA_PORT); + outb_p(0xF2, IO_INDEX_PORT); + outb_p(timeoutW, IO_DATA_PORT); + + /* Lock the SuperIO chip */ + outb_p(LOCK_DATA, IO_INDEX_PORT); + + spin_unlock_irqrestore(&spinlock, flags); + + return 0; +} + +/* + * Set the watchdog timeout value + */ + +static int wdt_set_timeout(int t) +{ + unsigned int tmrval; + + /* + * Convert seconds to watchdog counter time units, rounding up. + * On PCM-5335 watchdog units are 30 seconds/step with 15 sec startup + * value. This information is supplied in the PCM-5335 manual and was + * checked by me on a real board. This is a bit strange because W83977f + * datasheet says counter unit is in minutes! + */ + if (t < 15) + return -EINVAL; + + tmrval = ((t + 15) + 29) / 30; + + if (tmrval > 255) + return -EINVAL; + + /* + * timeout is the timeout in seconds, + * timeoutW is the timeout in watchdog counter units. + */ + timeoutW = tmrval; + timeout = (timeoutW * 30) - 15; + return 0; +} + +/* + * Get the watchdog status + */ + +static int wdt_get_status(int *status) +{ + int new_status; + unsigned long flags; + + spin_lock_irqsave(&spinlock, flags); + + /* Unlock the SuperIO chip */ + outb_p(UNLOCK_DATA, IO_INDEX_PORT); + outb_p(UNLOCK_DATA, IO_INDEX_PORT); + + /* Select device Aux2 (device=8) to read watchdog reg F4 */ + outb_p(DEVICE_REGISTER, IO_INDEX_PORT); + outb_p(0x08, IO_DATA_PORT); + outb_p(0xF4, IO_INDEX_PORT); + new_status = inb_p(IO_DATA_PORT); + + /* Lock the SuperIO chip */ + outb_p(LOCK_DATA, IO_INDEX_PORT); + + spin_unlock_irqrestore(&spinlock, flags); + + *status = 0; + if (new_status & 1) + *status |= WDIOF_CARDRESET; + + return 0; +} + + +/* + * /dev/watchdog handling + */ + +static int wdt_open(struct inode *inode, struct file *file) +{ + /* If the watchdog is alive we don't need to start it again */ + if (test_and_set_bit(0, &timer_alive)) + return -EBUSY; + + if (nowayout) + __module_get(THIS_MODULE); + + wdt_start(); + return nonseekable_open(inode, file); +} + +static int wdt_release(struct inode *inode, struct file *file) +{ + /* + * Shut off the timer. + * Lock it in if it's a module and we set nowayout + */ + if (expect_close == 42) { + wdt_stop(); + clear_bit(0, &timer_alive); + } else { + wdt_keepalive(); + pr_crit("unexpected close, not stopping watchdog!\n"); + } + expect_close = 0; + return 0; +} + +/* + * wdt_write: + * @file: file handle to the watchdog + * @buf: buffer to write (unused as data does not matter here + * @count: count of bytes + * @ppos: pointer to the position to write. No seeks allowed + * + * A write to a watchdog device is defined as a keepalive signal. Any + * write of data will do, as we we don't define content meaning. + */ + +static ssize_t wdt_write(struct file *file, const char __user *buf, + size_t count, loff_t *ppos) +{ + /* See if we got the magic character 'V' and reload the timer */ + if (count) { + if (!nowayout) { + size_t ofs; + + /* note: just in case someone wrote the + magic character long ago */ + expect_close = 0; + + /* scan to see whether or not we got the + magic character */ + for (ofs = 0; ofs != count; ofs++) { + char c; + if (get_user(c, buf + ofs)) + return -EFAULT; + if (c == 'V') + expect_close = 42; + } + } + + /* someone wrote to us, we should restart timer */ + wdt_keepalive(); + } + return count; +} + +/* + * wdt_ioctl: + * @inode: inode of the device + * @file: file handle to the device + * @cmd: watchdog command + * @arg: argument pointer + * + * The watchdog API defines a common set of functions for all watchdogs + * according to their available features. + */ + +static const struct watchdog_info ident = { + .options = WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE | WDIOF_KEEPALIVEPING, + .firmware_version = 1, + .identity = WATCHDOG_NAME, +}; + +static long wdt_ioctl(struct file *file, unsigned int cmd, unsigned long arg) +{ + int status; + int new_options, retval = -EINVAL; + int new_timeout; + union { + struct watchdog_info __user *ident; + int __user *i; + } uarg; + + uarg.i = (int __user *)arg; + + switch (cmd) { + case WDIOC_GETSUPPORT: + return copy_to_user(uarg.ident, &ident, + sizeof(ident)) ? -EFAULT : 0; + + case WDIOC_GETSTATUS: + wdt_get_status(&status); + return put_user(status, uarg.i); + + case WDIOC_GETBOOTSTATUS: + return put_user(0, uarg.i); + + case WDIOC_SETOPTIONS: + if (get_user(new_options, uarg.i)) + return -EFAULT; + + if (new_options & WDIOS_DISABLECARD) { + wdt_stop(); + retval = 0; + } + + if (new_options & WDIOS_ENABLECARD) { + wdt_start(); + retval = 0; + } + + return retval; + + case WDIOC_KEEPALIVE: + wdt_keepalive(); + return 0; + + case WDIOC_SETTIMEOUT: + if (get_user(new_timeout, uarg.i)) + return -EFAULT; + + if (wdt_set_timeout(new_timeout)) + return -EINVAL; + + wdt_keepalive(); + /* Fall through */ + + case WDIOC_GETTIMEOUT: + return put_user(timeout, uarg.i); + + default: + return -ENOTTY; + + } +} + +static int wdt_notify_sys(struct notifier_block *this, unsigned long code, + void *unused) +{ + if (code == SYS_DOWN || code == SYS_HALT) + wdt_stop(); + return NOTIFY_DONE; +} + +static const struct file_operations wdt_fops = { + .owner = THIS_MODULE, + .llseek = no_llseek, + .write = wdt_write, + .unlocked_ioctl = wdt_ioctl, + .open = wdt_open, + .release = wdt_release, +}; + +static struct miscdevice wdt_miscdev = { + .minor = WATCHDOG_MINOR, + .name = "watchdog", + .fops = &wdt_fops, +}; + +static struct notifier_block wdt_notifier = { + .notifier_call = wdt_notify_sys, +}; + +static int __init w83977f_wdt_init(void) +{ + int rc; + + pr_info("driver v%s\n", WATCHDOG_VERSION); + + /* + * Check that the timeout value is within it's range; + * if not reset to the default + */ + if (wdt_set_timeout(timeout)) { + wdt_set_timeout(DEFAULT_TIMEOUT); + pr_info("timeout value must be 15 <= timeout <= 7635, using %d\n", + DEFAULT_TIMEOUT); + } + + if (!request_region(IO_INDEX_PORT, 2, WATCHDOG_NAME)) { + pr_err("I/O address 0x%04x already in use\n", IO_INDEX_PORT); + rc = -EIO; + goto err_out; + } + + rc = register_reboot_notifier(&wdt_notifier); + if (rc) { + pr_err("cannot register reboot notifier (err=%d)\n", rc); + goto err_out_region; + } + + rc = misc_register(&wdt_miscdev); + if (rc) { + pr_err("cannot register miscdev on minor=%d (err=%d)\n", + wdt_miscdev.minor, rc); + goto err_out_reboot; + } + + pr_info("initialized. timeout=%d sec (nowayout=%d testmode=%d)\n", + timeout, nowayout, testmode); + + return 0; + +err_out_reboot: + unregister_reboot_notifier(&wdt_notifier); +err_out_region: + release_region(IO_INDEX_PORT, 2); +err_out: + return rc; +} + +static void __exit w83977f_wdt_exit(void) +{ + wdt_stop(); + misc_deregister(&wdt_miscdev); + unregister_reboot_notifier(&wdt_notifier); + release_region(IO_INDEX_PORT, 2); +} + +module_init(w83977f_wdt_init); +module_exit(w83977f_wdt_exit); + +MODULE_AUTHOR("Jose Goncalves <jose.goncalves@inov.pt>"); +MODULE_DESCRIPTION("Driver for watchdog timer in W83977F I/O chip"); +MODULE_LICENSE("GPL"); diff --git a/drivers/watchdog/wafer5823wdt.c b/drivers/watchdog/wafer5823wdt.c new file mode 100644 index 000000000..93c5b610e --- /dev/null +++ b/drivers/watchdog/wafer5823wdt.c @@ -0,0 +1,326 @@ +/* + * ICP Wafer 5823 Single Board Computer WDT driver + * http://www.icpamerica.com/wafer_5823.php + * May also work on other similar models + * + * (c) Copyright 2002 Justin Cormack <justin@street-vision.com> + * + * Release 0.02 + * + * Based on advantechwdt.c which is based on wdt.c. + * Original copyright messages: + * + * (c) Copyright 1996-1997 Alan Cox <alan@lxorguk.ukuu.org.uk>, + * All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * Neither Alan Cox nor CymruNet Ltd. admit liability nor provide + * warranty for any of this software. This material is provided + * "AS-IS" and at no charge. + * + * (c) Copyright 1995 Alan Cox <alan@lxorguk.ukuu.org.uk> + * + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/miscdevice.h> +#include <linux/watchdog.h> +#include <linux/fs.h> +#include <linux/ioport.h> +#include <linux/notifier.h> +#include <linux/reboot.h> +#include <linux/init.h> +#include <linux/spinlock.h> +#include <linux/io.h> +#include <linux/uaccess.h> + +#define WATCHDOG_NAME "Wafer 5823 WDT" +#define PFX WATCHDOG_NAME ": " +#define WD_TIMO 60 /* 60 sec default timeout */ + +static unsigned long wafwdt_is_open; +static char expect_close; +static DEFINE_SPINLOCK(wafwdt_lock); + +/* + * You must set these - there is no sane way to probe for this board. + * + * To enable, write the timeout value in seconds (1 to 255) to I/O + * port WDT_START, then read the port to start the watchdog. To pat + * the dog, read port WDT_STOP to stop the timer, then read WDT_START + * to restart it again. + */ + +static int wdt_stop = 0x843; +static int wdt_start = 0x443; + +static int timeout = WD_TIMO; /* in seconds */ +module_param(timeout, int, 0); +MODULE_PARM_DESC(timeout, + "Watchdog timeout in seconds. 1 <= timeout <= 255, default=" + __MODULE_STRING(WD_TIMO) "."); + +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); +MODULE_PARM_DESC(nowayout, + "Watchdog cannot be stopped once started (default=" + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); + +static void wafwdt_ping(void) +{ + /* pat watchdog */ + spin_lock(&wafwdt_lock); + inb_p(wdt_stop); + inb_p(wdt_start); + spin_unlock(&wafwdt_lock); +} + +static void wafwdt_start(void) +{ + /* start up watchdog */ + outb_p(timeout, wdt_start); + inb_p(wdt_start); +} + +static void wafwdt_stop(void) +{ + /* stop watchdog */ + inb_p(wdt_stop); +} + +static ssize_t wafwdt_write(struct file *file, const char __user *buf, + size_t count, loff_t *ppos) +{ + /* See if we got the magic character 'V' and reload the timer */ + if (count) { + if (!nowayout) { + size_t i; + + /* In case it was set long ago */ + expect_close = 0; + + /* scan to see whether or not we got the magic + character */ + for (i = 0; i != count; i++) { + char c; + if (get_user(c, buf + i)) + return -EFAULT; + if (c == 'V') + expect_close = 42; + } + } + /* Well, anyhow someone wrote to us, we should + return that favour */ + wafwdt_ping(); + } + return count; +} + +static long wafwdt_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) +{ + int new_timeout; + void __user *argp = (void __user *)arg; + int __user *p = argp; + static const struct watchdog_info ident = { + .options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT | + WDIOF_MAGICCLOSE, + .firmware_version = 1, + .identity = "Wafer 5823 WDT", + }; + + switch (cmd) { + case WDIOC_GETSUPPORT: + if (copy_to_user(argp, &ident, sizeof(ident))) + return -EFAULT; + break; + + case WDIOC_GETSTATUS: + case WDIOC_GETBOOTSTATUS: + return put_user(0, p); + + case WDIOC_SETOPTIONS: + { + int options, retval = -EINVAL; + + if (get_user(options, p)) + return -EFAULT; + + if (options & WDIOS_DISABLECARD) { + wafwdt_stop(); + retval = 0; + } + + if (options & WDIOS_ENABLECARD) { + wafwdt_start(); + retval = 0; + } + + return retval; + } + + case WDIOC_KEEPALIVE: + wafwdt_ping(); + break; + + case WDIOC_SETTIMEOUT: + if (get_user(new_timeout, p)) + return -EFAULT; + if ((new_timeout < 1) || (new_timeout > 255)) + return -EINVAL; + timeout = new_timeout; + wafwdt_stop(); + wafwdt_start(); + /* Fall through */ + case WDIOC_GETTIMEOUT: + return put_user(timeout, p); + + default: + return -ENOTTY; + } + return 0; +} + +static int wafwdt_open(struct inode *inode, struct file *file) +{ + if (test_and_set_bit(0, &wafwdt_is_open)) + return -EBUSY; + + /* + * Activate + */ + wafwdt_start(); + return nonseekable_open(inode, file); +} + +static int wafwdt_close(struct inode *inode, struct file *file) +{ + if (expect_close == 42) + wafwdt_stop(); + else { + pr_crit("WDT device closed unexpectedly. WDT will not stop!\n"); + wafwdt_ping(); + } + clear_bit(0, &wafwdt_is_open); + expect_close = 0; + return 0; +} + +/* + * Notifier for system down + */ + +static int wafwdt_notify_sys(struct notifier_block *this, unsigned long code, + void *unused) +{ + if (code == SYS_DOWN || code == SYS_HALT) + wafwdt_stop(); + return NOTIFY_DONE; +} + +/* + * Kernel Interfaces + */ + +static const struct file_operations wafwdt_fops = { + .owner = THIS_MODULE, + .llseek = no_llseek, + .write = wafwdt_write, + .unlocked_ioctl = wafwdt_ioctl, + .open = wafwdt_open, + .release = wafwdt_close, +}; + +static struct miscdevice wafwdt_miscdev = { + .minor = WATCHDOG_MINOR, + .name = "watchdog", + .fops = &wafwdt_fops, +}; + +/* + * The WDT needs to learn about soft shutdowns in order to + * turn the timebomb registers off. + */ + +static struct notifier_block wafwdt_notifier = { + .notifier_call = wafwdt_notify_sys, +}; + +static int __init wafwdt_init(void) +{ + int ret; + + pr_info("WDT driver for Wafer 5823 single board computer initialising\n"); + + if (timeout < 1 || timeout > 255) { + timeout = WD_TIMO; + pr_info("timeout value must be 1 <= x <= 255, using %d\n", + timeout); + } + + if (wdt_stop != wdt_start) { + if (!request_region(wdt_stop, 1, "Wafer 5823 WDT")) { + pr_err("I/O address 0x%04x already in use\n", wdt_stop); + ret = -EIO; + goto error; + } + } + + if (!request_region(wdt_start, 1, "Wafer 5823 WDT")) { + pr_err("I/O address 0x%04x already in use\n", wdt_start); + ret = -EIO; + goto error2; + } + + ret = register_reboot_notifier(&wafwdt_notifier); + if (ret != 0) { + pr_err("cannot register reboot notifier (err=%d)\n", ret); + goto error3; + } + + ret = misc_register(&wafwdt_miscdev); + if (ret != 0) { + pr_err("cannot register miscdev on minor=%d (err=%d)\n", + WATCHDOG_MINOR, ret); + goto error4; + } + + pr_info("initialized. timeout=%d sec (nowayout=%d)\n", + timeout, nowayout); + + return ret; +error4: + unregister_reboot_notifier(&wafwdt_notifier); +error3: + release_region(wdt_start, 1); +error2: + if (wdt_stop != wdt_start) + release_region(wdt_stop, 1); +error: + return ret; +} + +static void __exit wafwdt_exit(void) +{ + misc_deregister(&wafwdt_miscdev); + unregister_reboot_notifier(&wafwdt_notifier); + if (wdt_stop != wdt_start) + release_region(wdt_stop, 1); + release_region(wdt_start, 1); +} + +module_init(wafwdt_init); +module_exit(wafwdt_exit); + +MODULE_AUTHOR("Justin Cormack"); +MODULE_DESCRIPTION("ICP Wafer 5823 Single Board Computer WDT driver"); +MODULE_LICENSE("GPL"); + +/* end of wafer5823wdt.c */ diff --git a/drivers/watchdog/watchdog_core.c b/drivers/watchdog/watchdog_core.c new file mode 100644 index 000000000..5c600a370 --- /dev/null +++ b/drivers/watchdog/watchdog_core.c @@ -0,0 +1,414 @@ +/* + * watchdog_core.c + * + * (c) Copyright 2008-2011 Alan Cox <alan@lxorguk.ukuu.org.uk>, + * All Rights Reserved. + * + * (c) Copyright 2008-2011 Wim Van Sebroeck <wim@iguana.be>. + * + * This source code is part of the generic code that can be used + * by all the watchdog timer drivers. + * + * Based on source code of the following authors: + * Matt Domsch <Matt_Domsch@dell.com>, + * Rob Radez <rob@osinvestor.com>, + * Rusty Lynch <rusty@linux.co.intel.com> + * Satyam Sharma <satyam@infradead.org> + * Randy Dunlap <randy.dunlap@oracle.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * Neither Alan Cox, CymruNet Ltd., Wim Van Sebroeck nor Iguana vzw. + * admit liability nor provide warranty for any of this software. + * This material is provided "AS-IS" and at no charge. + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/module.h> /* For EXPORT_SYMBOL/module stuff/... */ +#include <linux/types.h> /* For standard types */ +#include <linux/errno.h> /* For the -ENODEV/... values */ +#include <linux/kernel.h> /* For printk/panic/... */ +#include <linux/reboot.h> /* For restart handler */ +#include <linux/watchdog.h> /* For watchdog specific items */ +#include <linux/init.h> /* For __init/__exit/... */ +#include <linux/idr.h> /* For ida_* macros */ +#include <linux/err.h> /* For IS_ERR macros */ +#include <linux/of.h> /* For of_get_timeout_sec */ + +#include "watchdog_core.h" /* For watchdog_dev_register/... */ + +static DEFINE_IDA(watchdog_ida); + +/* + * Deferred Registration infrastructure. + * + * Sometimes watchdog drivers needs to be loaded as soon as possible, + * for example when it's impossible to disable it. To do so, + * raising the initcall level of the watchdog driver is a solution. + * But in such case, the miscdev is maybe not ready (subsys_initcall), and + * watchdog_core need miscdev to register the watchdog as a char device. + * + * The deferred registration infrastructure offer a way for the watchdog + * subsystem to register a watchdog properly, even before miscdev is ready. + */ + +static DEFINE_MUTEX(wtd_deferred_reg_mutex); +static LIST_HEAD(wtd_deferred_reg_list); +static bool wtd_deferred_reg_done; + +static int watchdog_deferred_registration_add(struct watchdog_device *wdd) +{ + list_add_tail(&wdd->deferred, + &wtd_deferred_reg_list); + return 0; +} + +static void watchdog_deferred_registration_del(struct watchdog_device *wdd) +{ + struct list_head *p, *n; + struct watchdog_device *wdd_tmp; + + list_for_each_safe(p, n, &wtd_deferred_reg_list) { + wdd_tmp = list_entry(p, struct watchdog_device, + deferred); + if (wdd_tmp == wdd) { + list_del(&wdd_tmp->deferred); + break; + } + } +} + +static void watchdog_check_min_max_timeout(struct watchdog_device *wdd) +{ + /* + * Check that we have valid min and max timeout values, if + * not reset them both to 0 (=not used or unknown) + */ + if (!wdd->max_hw_heartbeat_ms && wdd->min_timeout > wdd->max_timeout) { + pr_info("Invalid min and max timeout values, resetting to 0!\n"); + wdd->min_timeout = 0; + wdd->max_timeout = 0; + } +} + +/** + * watchdog_init_timeout() - initialize the timeout field + * @wdd: watchdog device + * @timeout_parm: timeout module parameter + * @dev: Device that stores the timeout-sec property + * + * Initialize the timeout field of the watchdog_device struct with either the + * timeout module parameter (if it is valid value) or the timeout-sec property + * (only if it is a valid value and the timeout_parm is out of bounds). + * If none of them are valid then we keep the old value (which should normally + * be the default timeout value). + * + * A zero is returned on success and -EINVAL for failure. + */ +int watchdog_init_timeout(struct watchdog_device *wdd, + unsigned int timeout_parm, struct device *dev) +{ + unsigned int t = 0; + int ret = 0; + + watchdog_check_min_max_timeout(wdd); + + /* try to get the timeout module parameter first */ + if (!watchdog_timeout_invalid(wdd, timeout_parm) && timeout_parm) { + wdd->timeout = timeout_parm; + return ret; + } + if (timeout_parm) + ret = -EINVAL; + + /* try to get the timeout_sec property */ + if (dev == NULL || dev->of_node == NULL) + return ret; + of_property_read_u32(dev->of_node, "timeout-sec", &t); + if (!watchdog_timeout_invalid(wdd, t) && t) + wdd->timeout = t; + else + ret = -EINVAL; + + return ret; +} +EXPORT_SYMBOL_GPL(watchdog_init_timeout); + +static int watchdog_reboot_notifier(struct notifier_block *nb, + unsigned long code, void *data) +{ + struct watchdog_device *wdd; + + wdd = container_of(nb, struct watchdog_device, reboot_nb); + if (code == SYS_DOWN || code == SYS_HALT) { + if (watchdog_active(wdd)) { + int ret; + + ret = wdd->ops->stop(wdd); + if (ret) + return NOTIFY_BAD; + } + } + + return NOTIFY_DONE; +} + +static int watchdog_restart_notifier(struct notifier_block *nb, + unsigned long action, void *data) +{ + struct watchdog_device *wdd = container_of(nb, struct watchdog_device, + restart_nb); + + int ret; + + ret = wdd->ops->restart(wdd, action, data); + if (ret) + return NOTIFY_BAD; + + return NOTIFY_DONE; +} + +/** + * watchdog_set_restart_priority - Change priority of restart handler + * @wdd: watchdog device + * @priority: priority of the restart handler, should follow these guidelines: + * 0: use watchdog's restart function as last resort, has limited restart + * capabilies + * 128: default restart handler, use if no other handler is expected to be + * available and/or if restart is sufficient to restart the entire system + * 255: preempt all other handlers + * + * If a wdd->ops->restart function is provided when watchdog_register_device is + * called, it will be registered as a restart handler with the priority given + * here. + */ +void watchdog_set_restart_priority(struct watchdog_device *wdd, int priority) +{ + wdd->restart_nb.priority = priority; +} +EXPORT_SYMBOL_GPL(watchdog_set_restart_priority); + +static int __watchdog_register_device(struct watchdog_device *wdd) +{ + int ret, id = -1; + + if (wdd == NULL || wdd->info == NULL || wdd->ops == NULL) + return -EINVAL; + + /* Mandatory operations need to be supported */ + if (!wdd->ops->start || (!wdd->ops->stop && !wdd->max_hw_heartbeat_ms)) + return -EINVAL; + + watchdog_check_min_max_timeout(wdd); + + /* + * Note: now that all watchdog_device data has been verified, we + * will not check this anymore in other functions. If data gets + * corrupted in a later stage then we expect a kernel panic! + */ + + /* Use alias for watchdog id if possible */ + if (wdd->parent) { + ret = of_alias_get_id(wdd->parent->of_node, "watchdog"); + if (ret >= 0) + id = ida_simple_get(&watchdog_ida, ret, + ret + 1, GFP_KERNEL); + } + + if (id < 0) + id = ida_simple_get(&watchdog_ida, 0, MAX_DOGS, GFP_KERNEL); + + if (id < 0) + return id; + wdd->id = id; + + ret = watchdog_dev_register(wdd); + if (ret) { + ida_simple_remove(&watchdog_ida, id); + if (!(id == 0 && ret == -EBUSY)) + return ret; + + /* Retry in case a legacy watchdog module exists */ + id = ida_simple_get(&watchdog_ida, 1, MAX_DOGS, GFP_KERNEL); + if (id < 0) + return id; + wdd->id = id; + + ret = watchdog_dev_register(wdd); + if (ret) { + ida_simple_remove(&watchdog_ida, id); + return ret; + } + } + + if (test_bit(WDOG_STOP_ON_REBOOT, &wdd->status)) { + if (!wdd->ops->stop) + pr_warn("watchdog%d: stop_on_reboot not supported\n", wdd->id); + else { + wdd->reboot_nb.notifier_call = watchdog_reboot_notifier; + + ret = register_reboot_notifier(&wdd->reboot_nb); + if (ret) { + pr_err("watchdog%d: Cannot register reboot notifier (%d)\n", + wdd->id, ret); + watchdog_dev_unregister(wdd); + ida_simple_remove(&watchdog_ida, id); + return ret; + } + } + } + + if (wdd->ops->restart) { + wdd->restart_nb.notifier_call = watchdog_restart_notifier; + + ret = register_restart_handler(&wdd->restart_nb); + if (ret) + pr_warn("watchdog%d: Cannot register restart handler (%d)\n", + wdd->id, ret); + } + + return 0; +} + +/** + * watchdog_register_device() - register a watchdog device + * @wdd: watchdog device + * + * Register a watchdog device with the kernel so that the + * watchdog timer can be accessed from userspace. + * + * A zero is returned on success and a negative errno code for + * failure. + */ + +int watchdog_register_device(struct watchdog_device *wdd) +{ + int ret; + + mutex_lock(&wtd_deferred_reg_mutex); + if (wtd_deferred_reg_done) + ret = __watchdog_register_device(wdd); + else + ret = watchdog_deferred_registration_add(wdd); + mutex_unlock(&wtd_deferred_reg_mutex); + return ret; +} +EXPORT_SYMBOL_GPL(watchdog_register_device); + +static void __watchdog_unregister_device(struct watchdog_device *wdd) +{ + if (wdd == NULL) + return; + + if (wdd->ops->restart) + unregister_restart_handler(&wdd->restart_nb); + + if (test_bit(WDOG_STOP_ON_REBOOT, &wdd->status)) + unregister_reboot_notifier(&wdd->reboot_nb); + + watchdog_dev_unregister(wdd); + ida_simple_remove(&watchdog_ida, wdd->id); +} + +/** + * watchdog_unregister_device() - unregister a watchdog device + * @wdd: watchdog device to unregister + * + * Unregister a watchdog device that was previously successfully + * registered with watchdog_register_device(). + */ + +void watchdog_unregister_device(struct watchdog_device *wdd) +{ + mutex_lock(&wtd_deferred_reg_mutex); + if (wtd_deferred_reg_done) + __watchdog_unregister_device(wdd); + else + watchdog_deferred_registration_del(wdd); + mutex_unlock(&wtd_deferred_reg_mutex); +} + +EXPORT_SYMBOL_GPL(watchdog_unregister_device); + +static void devm_watchdog_unregister_device(struct device *dev, void *res) +{ + watchdog_unregister_device(*(struct watchdog_device **)res); +} + +/** + * devm_watchdog_register_device() - resource managed watchdog_register_device() + * @dev: device that is registering this watchdog device + * @wdd: watchdog device + * + * Managed watchdog_register_device(). For watchdog device registered by this + * function, watchdog_unregister_device() is automatically called on driver + * detach. See watchdog_register_device() for more information. + */ +int devm_watchdog_register_device(struct device *dev, + struct watchdog_device *wdd) +{ + struct watchdog_device **rcwdd; + int ret; + + rcwdd = devres_alloc(devm_watchdog_unregister_device, sizeof(*rcwdd), + GFP_KERNEL); + if (!rcwdd) + return -ENOMEM; + + ret = watchdog_register_device(wdd); + if (!ret) { + *rcwdd = wdd; + devres_add(dev, rcwdd); + } else { + devres_free(rcwdd); + } + + return ret; +} +EXPORT_SYMBOL_GPL(devm_watchdog_register_device); + +static int __init watchdog_deferred_registration(void) +{ + mutex_lock(&wtd_deferred_reg_mutex); + wtd_deferred_reg_done = true; + while (!list_empty(&wtd_deferred_reg_list)) { + struct watchdog_device *wdd; + + wdd = list_first_entry(&wtd_deferred_reg_list, + struct watchdog_device, deferred); + list_del(&wdd->deferred); + __watchdog_register_device(wdd); + } + mutex_unlock(&wtd_deferred_reg_mutex); + return 0; +} + +static int __init watchdog_init(void) +{ + int err; + + err = watchdog_dev_init(); + if (err < 0) + return err; + + watchdog_deferred_registration(); + return 0; +} + +static void __exit watchdog_exit(void) +{ + watchdog_dev_exit(); + ida_destroy(&watchdog_ida); +} + +subsys_initcall_sync(watchdog_init); +module_exit(watchdog_exit); + +MODULE_AUTHOR("Alan Cox <alan@lxorguk.ukuu.org.uk>"); +MODULE_AUTHOR("Wim Van Sebroeck <wim@iguana.be>"); +MODULE_DESCRIPTION("WatchDog Timer Driver Core"); +MODULE_LICENSE("GPL"); diff --git a/drivers/watchdog/watchdog_core.h b/drivers/watchdog/watchdog_core.h new file mode 100644 index 000000000..86ff962d1 --- /dev/null +++ b/drivers/watchdog/watchdog_core.h @@ -0,0 +1,37 @@ +/* + * watchdog_core.h + * + * (c) Copyright 2008-2011 Alan Cox <alan@lxorguk.ukuu.org.uk>, + * All Rights Reserved. + * + * (c) Copyright 2008-2011 Wim Van Sebroeck <wim@iguana.be>. + * + * This source code is part of the generic code that can be used + * by all the watchdog timer drivers. + * + * Based on source code of the following authors: + * Matt Domsch <Matt_Domsch@dell.com>, + * Rob Radez <rob@osinvestor.com>, + * Rusty Lynch <rusty@linux.co.intel.com> + * Satyam Sharma <satyam@infradead.org> + * Randy Dunlap <randy.dunlap@oracle.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * Neither Alan Cox, CymruNet Ltd., Wim Van Sebroeck nor Iguana vzw. + * admit liability nor provide warranty for any of this software. + * This material is provided "AS-IS" and at no charge. + */ + +#define MAX_DOGS 32 /* Maximum number of watchdog devices */ + +/* + * Functions/procedures to be called by the core + */ +extern int watchdog_dev_register(struct watchdog_device *); +extern void watchdog_dev_unregister(struct watchdog_device *); +extern int __init watchdog_dev_init(void); +extern void __exit watchdog_dev_exit(void); diff --git a/drivers/watchdog/watchdog_dev.c b/drivers/watchdog/watchdog_dev.c new file mode 100644 index 000000000..8fe59b7d8 --- /dev/null +++ b/drivers/watchdog/watchdog_dev.c @@ -0,0 +1,1146 @@ +/* + * watchdog_dev.c + * + * (c) Copyright 2008-2011 Alan Cox <alan@lxorguk.ukuu.org.uk>, + * All Rights Reserved. + * + * (c) Copyright 2008-2011 Wim Van Sebroeck <wim@iguana.be>. + * + * + * This source code is part of the generic code that can be used + * by all the watchdog timer drivers. + * + * This part of the generic code takes care of the following + * misc device: /dev/watchdog. + * + * Based on source code of the following authors: + * Matt Domsch <Matt_Domsch@dell.com>, + * Rob Radez <rob@osinvestor.com>, + * Rusty Lynch <rusty@linux.co.intel.com> + * Satyam Sharma <satyam@infradead.org> + * Randy Dunlap <randy.dunlap@oracle.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * Neither Alan Cox, CymruNet Ltd., Wim Van Sebroeck nor Iguana vzw. + * admit liability nor provide warranty for any of this software. + * This material is provided "AS-IS" and at no charge. + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/cdev.h> /* For character device */ +#include <linux/errno.h> /* For the -ENODEV/... values */ +#include <linux/fs.h> /* For file operations */ +#include <linux/init.h> /* For __init/__exit/... */ +#include <linux/hrtimer.h> /* For hrtimers */ +#include <linux/kernel.h> /* For printk/panic/... */ +#include <linux/kthread.h> /* For kthread_work */ +#include <linux/miscdevice.h> /* For handling misc devices */ +#include <linux/module.h> /* For module stuff/... */ +#include <linux/mutex.h> /* For mutexes */ +#include <linux/slab.h> /* For memory functions */ +#include <linux/types.h> /* For standard types (like size_t) */ +#include <linux/watchdog.h> /* For watchdog specific items */ +#include <linux/uaccess.h> /* For copy_to_user/put_user/... */ + +#include <uapi/linux/sched/types.h> /* For struct sched_param */ + +#include "watchdog_core.h" +#include "watchdog_pretimeout.h" + +/* + * struct watchdog_core_data - watchdog core internal data + * @dev: The watchdog's internal device + * @cdev: The watchdog's Character device. + * @wdd: Pointer to watchdog device. + * @lock: Lock for watchdog core. + * @status: Watchdog core internal status bits. + */ +struct watchdog_core_data { + struct device dev; + struct cdev cdev; + struct watchdog_device *wdd; + struct mutex lock; + ktime_t last_keepalive; + ktime_t last_hw_keepalive; + struct hrtimer timer; + struct kthread_work work; + unsigned long status; /* Internal status bits */ +#define _WDOG_DEV_OPEN 0 /* Opened ? */ +#define _WDOG_ALLOW_RELEASE 1 /* Did we receive the magic char ? */ +#define _WDOG_KEEPALIVE 2 /* Did we receive a keepalive ? */ +}; + +/* the dev_t structure to store the dynamically allocated watchdog devices */ +static dev_t watchdog_devt; +/* Reference to watchdog device behind /dev/watchdog */ +static struct watchdog_core_data *old_wd_data; + +static struct kthread_worker *watchdog_kworker; + +static bool handle_boot_enabled = + IS_ENABLED(CONFIG_WATCHDOG_HANDLE_BOOT_ENABLED); + +static inline bool watchdog_need_worker(struct watchdog_device *wdd) +{ + /* All variables in milli-seconds */ + unsigned int hm = wdd->max_hw_heartbeat_ms; + unsigned int t = wdd->timeout * 1000; + + /* + * A worker to generate heartbeat requests is needed if all of the + * following conditions are true. + * - Userspace activated the watchdog. + * - The driver provided a value for the maximum hardware timeout, and + * thus is aware that the framework supports generating heartbeat + * requests. + * - Userspace requests a longer timeout than the hardware can handle. + * + * Alternatively, if userspace has not opened the watchdog + * device, we take care of feeding the watchdog if it is + * running. + */ + return (hm && watchdog_active(wdd) && t > hm) || + (t && !watchdog_active(wdd) && watchdog_hw_running(wdd)); +} + +static ktime_t watchdog_next_keepalive(struct watchdog_device *wdd) +{ + struct watchdog_core_data *wd_data = wdd->wd_data; + unsigned int timeout_ms = wdd->timeout * 1000; + ktime_t keepalive_interval; + ktime_t last_heartbeat, latest_heartbeat; + ktime_t virt_timeout; + unsigned int hw_heartbeat_ms; + + virt_timeout = ktime_add(wd_data->last_keepalive, + ms_to_ktime(timeout_ms)); + hw_heartbeat_ms = min_not_zero(timeout_ms, wdd->max_hw_heartbeat_ms); + keepalive_interval = ms_to_ktime(hw_heartbeat_ms / 2); + + if (!watchdog_active(wdd)) + return keepalive_interval; + + /* + * To ensure that the watchdog times out wdd->timeout seconds + * after the most recent ping from userspace, the last + * worker ping has to come in hw_heartbeat_ms before this timeout. + */ + last_heartbeat = ktime_sub(virt_timeout, ms_to_ktime(hw_heartbeat_ms)); + latest_heartbeat = ktime_sub(last_heartbeat, ktime_get()); + if (ktime_before(latest_heartbeat, keepalive_interval)) + return latest_heartbeat; + return keepalive_interval; +} + +static inline void watchdog_update_worker(struct watchdog_device *wdd) +{ + struct watchdog_core_data *wd_data = wdd->wd_data; + + if (watchdog_need_worker(wdd)) { + ktime_t t = watchdog_next_keepalive(wdd); + + if (t > 0) + hrtimer_start(&wd_data->timer, t, HRTIMER_MODE_REL); + } else { + hrtimer_cancel(&wd_data->timer); + } +} + +static int __watchdog_ping(struct watchdog_device *wdd) +{ + struct watchdog_core_data *wd_data = wdd->wd_data; + ktime_t earliest_keepalive, now; + int err; + + earliest_keepalive = ktime_add(wd_data->last_hw_keepalive, + ms_to_ktime(wdd->min_hw_heartbeat_ms)); + now = ktime_get(); + + if (ktime_after(earliest_keepalive, now)) { + hrtimer_start(&wd_data->timer, + ktime_sub(earliest_keepalive, now), + HRTIMER_MODE_REL); + return 0; + } + + wd_data->last_hw_keepalive = now; + + if (wdd->ops->ping) + err = wdd->ops->ping(wdd); /* ping the watchdog */ + else + err = wdd->ops->start(wdd); /* restart watchdog */ + + watchdog_update_worker(wdd); + + return err; +} + +/* + * watchdog_ping: ping the watchdog. + * @wdd: the watchdog device to ping + * + * The caller must hold wd_data->lock. + * + * If the watchdog has no own ping operation then it needs to be + * restarted via the start operation. This wrapper function does + * exactly that. + * We only ping when the watchdog device is running. + */ + +static int watchdog_ping(struct watchdog_device *wdd) +{ + struct watchdog_core_data *wd_data = wdd->wd_data; + + if (!watchdog_active(wdd) && !watchdog_hw_running(wdd)) + return 0; + + set_bit(_WDOG_KEEPALIVE, &wd_data->status); + + wd_data->last_keepalive = ktime_get(); + return __watchdog_ping(wdd); +} + +static bool watchdog_worker_should_ping(struct watchdog_core_data *wd_data) +{ + struct watchdog_device *wdd = wd_data->wdd; + + return wdd && (watchdog_active(wdd) || watchdog_hw_running(wdd)); +} + +static void watchdog_ping_work(struct kthread_work *work) +{ + struct watchdog_core_data *wd_data; + + wd_data = container_of(work, struct watchdog_core_data, work); + + mutex_lock(&wd_data->lock); + if (watchdog_worker_should_ping(wd_data)) + __watchdog_ping(wd_data->wdd); + mutex_unlock(&wd_data->lock); +} + +static enum hrtimer_restart watchdog_timer_expired(struct hrtimer *timer) +{ + struct watchdog_core_data *wd_data; + + wd_data = container_of(timer, struct watchdog_core_data, timer); + + kthread_queue_work(watchdog_kworker, &wd_data->work); + return HRTIMER_NORESTART; +} + +/* + * watchdog_start: wrapper to start the watchdog. + * @wdd: the watchdog device to start + * + * The caller must hold wd_data->lock. + * + * Start the watchdog if it is not active and mark it active. + * This function returns zero on success or a negative errno code for + * failure. + */ + +static int watchdog_start(struct watchdog_device *wdd) +{ + struct watchdog_core_data *wd_data = wdd->wd_data; + ktime_t started_at; + int err; + + if (watchdog_active(wdd)) + return 0; + + set_bit(_WDOG_KEEPALIVE, &wd_data->status); + + started_at = ktime_get(); + if (watchdog_hw_running(wdd) && wdd->ops->ping) + err = wdd->ops->ping(wdd); + else + err = wdd->ops->start(wdd); + if (err == 0) { + set_bit(WDOG_ACTIVE, &wdd->status); + wd_data->last_keepalive = started_at; + wd_data->last_hw_keepalive = started_at; + watchdog_update_worker(wdd); + } + + return err; +} + +/* + * watchdog_stop: wrapper to stop the watchdog. + * @wdd: the watchdog device to stop + * + * The caller must hold wd_data->lock. + * + * Stop the watchdog if it is still active and unmark it active. + * This function returns zero on success or a negative errno code for + * failure. + * If the 'nowayout' feature was set, the watchdog cannot be stopped. + */ + +static int watchdog_stop(struct watchdog_device *wdd) +{ + int err = 0; + + if (!watchdog_active(wdd)) + return 0; + + if (test_bit(WDOG_NO_WAY_OUT, &wdd->status)) { + pr_info("watchdog%d: nowayout prevents watchdog being stopped!\n", + wdd->id); + return -EBUSY; + } + + if (wdd->ops->stop) { + clear_bit(WDOG_HW_RUNNING, &wdd->status); + err = wdd->ops->stop(wdd); + } else { + set_bit(WDOG_HW_RUNNING, &wdd->status); + } + + if (err == 0) { + clear_bit(WDOG_ACTIVE, &wdd->status); + watchdog_update_worker(wdd); + } + + return err; +} + +/* + * watchdog_get_status: wrapper to get the watchdog status + * @wdd: the watchdog device to get the status from + * + * The caller must hold wd_data->lock. + * + * Get the watchdog's status flags. + */ + +static unsigned int watchdog_get_status(struct watchdog_device *wdd) +{ + struct watchdog_core_data *wd_data = wdd->wd_data; + unsigned int status; + + if (wdd->ops->status) + status = wdd->ops->status(wdd); + else + status = wdd->bootstatus & (WDIOF_CARDRESET | + WDIOF_OVERHEAT | + WDIOF_FANFAULT | + WDIOF_EXTERN1 | + WDIOF_EXTERN2 | + WDIOF_POWERUNDER | + WDIOF_POWEROVER); + + if (test_bit(_WDOG_ALLOW_RELEASE, &wd_data->status)) + status |= WDIOF_MAGICCLOSE; + + if (test_and_clear_bit(_WDOG_KEEPALIVE, &wd_data->status)) + status |= WDIOF_KEEPALIVEPING; + + return status; +} + +/* + * watchdog_set_timeout: set the watchdog timer timeout + * @wdd: the watchdog device to set the timeout for + * @timeout: timeout to set in seconds + * + * The caller must hold wd_data->lock. + */ + +static int watchdog_set_timeout(struct watchdog_device *wdd, + unsigned int timeout) +{ + int err = 0; + + if (!(wdd->info->options & WDIOF_SETTIMEOUT)) + return -EOPNOTSUPP; + + if (watchdog_timeout_invalid(wdd, timeout)) + return -EINVAL; + + if (wdd->ops->set_timeout) { + err = wdd->ops->set_timeout(wdd, timeout); + } else { + wdd->timeout = timeout; + /* Disable pretimeout if it doesn't fit the new timeout */ + if (wdd->pretimeout >= wdd->timeout) + wdd->pretimeout = 0; + } + + watchdog_update_worker(wdd); + + return err; +} + +/* + * watchdog_set_pretimeout: set the watchdog timer pretimeout + * @wdd: the watchdog device to set the timeout for + * @timeout: pretimeout to set in seconds + */ + +static int watchdog_set_pretimeout(struct watchdog_device *wdd, + unsigned int timeout) +{ + int err = 0; + + if (!(wdd->info->options & WDIOF_PRETIMEOUT)) + return -EOPNOTSUPP; + + if (watchdog_pretimeout_invalid(wdd, timeout)) + return -EINVAL; + + if (wdd->ops->set_pretimeout) + err = wdd->ops->set_pretimeout(wdd, timeout); + else + wdd->pretimeout = timeout; + + return err; +} + +/* + * watchdog_get_timeleft: wrapper to get the time left before a reboot + * @wdd: the watchdog device to get the remaining time from + * @timeleft: the time that's left + * + * The caller must hold wd_data->lock. + * + * Get the time before a watchdog will reboot (if not pinged). + */ + +static int watchdog_get_timeleft(struct watchdog_device *wdd, + unsigned int *timeleft) +{ + *timeleft = 0; + + if (!wdd->ops->get_timeleft) + return -EOPNOTSUPP; + + *timeleft = wdd->ops->get_timeleft(wdd); + + return 0; +} + +#ifdef CONFIG_WATCHDOG_SYSFS +static ssize_t nowayout_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct watchdog_device *wdd = dev_get_drvdata(dev); + + return sprintf(buf, "%d\n", !!test_bit(WDOG_NO_WAY_OUT, &wdd->status)); +} +static DEVICE_ATTR_RO(nowayout); + +static ssize_t status_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct watchdog_device *wdd = dev_get_drvdata(dev); + struct watchdog_core_data *wd_data = wdd->wd_data; + unsigned int status; + + mutex_lock(&wd_data->lock); + status = watchdog_get_status(wdd); + mutex_unlock(&wd_data->lock); + + return sprintf(buf, "0x%x\n", status); +} +static DEVICE_ATTR_RO(status); + +static ssize_t bootstatus_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct watchdog_device *wdd = dev_get_drvdata(dev); + + return sprintf(buf, "%u\n", wdd->bootstatus); +} +static DEVICE_ATTR_RO(bootstatus); + +static ssize_t timeleft_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct watchdog_device *wdd = dev_get_drvdata(dev); + struct watchdog_core_data *wd_data = wdd->wd_data; + ssize_t status; + unsigned int val; + + mutex_lock(&wd_data->lock); + status = watchdog_get_timeleft(wdd, &val); + mutex_unlock(&wd_data->lock); + if (!status) + status = sprintf(buf, "%u\n", val); + + return status; +} +static DEVICE_ATTR_RO(timeleft); + +static ssize_t timeout_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct watchdog_device *wdd = dev_get_drvdata(dev); + + return sprintf(buf, "%u\n", wdd->timeout); +} +static DEVICE_ATTR_RO(timeout); + +static ssize_t pretimeout_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct watchdog_device *wdd = dev_get_drvdata(dev); + + return sprintf(buf, "%u\n", wdd->pretimeout); +} +static DEVICE_ATTR_RO(pretimeout); + +static ssize_t identity_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct watchdog_device *wdd = dev_get_drvdata(dev); + + return sprintf(buf, "%s\n", wdd->info->identity); +} +static DEVICE_ATTR_RO(identity); + +static ssize_t state_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct watchdog_device *wdd = dev_get_drvdata(dev); + + if (watchdog_active(wdd)) + return sprintf(buf, "active\n"); + + return sprintf(buf, "inactive\n"); +} +static DEVICE_ATTR_RO(state); + +static ssize_t pretimeout_available_governors_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + return watchdog_pretimeout_available_governors_get(buf); +} +static DEVICE_ATTR_RO(pretimeout_available_governors); + +static ssize_t pretimeout_governor_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct watchdog_device *wdd = dev_get_drvdata(dev); + + return watchdog_pretimeout_governor_get(wdd, buf); +} + +static ssize_t pretimeout_governor_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct watchdog_device *wdd = dev_get_drvdata(dev); + int ret = watchdog_pretimeout_governor_set(wdd, buf); + + if (!ret) + ret = count; + + return ret; +} +static DEVICE_ATTR_RW(pretimeout_governor); + +static umode_t wdt_is_visible(struct kobject *kobj, struct attribute *attr, + int n) +{ + struct device *dev = container_of(kobj, struct device, kobj); + struct watchdog_device *wdd = dev_get_drvdata(dev); + umode_t mode = attr->mode; + + if (attr == &dev_attr_timeleft.attr && !wdd->ops->get_timeleft) + mode = 0; + else if (attr == &dev_attr_pretimeout.attr && + !(wdd->info->options & WDIOF_PRETIMEOUT)) + mode = 0; + else if ((attr == &dev_attr_pretimeout_governor.attr || + attr == &dev_attr_pretimeout_available_governors.attr) && + (!(wdd->info->options & WDIOF_PRETIMEOUT) || + !IS_ENABLED(CONFIG_WATCHDOG_PRETIMEOUT_GOV))) + mode = 0; + + return mode; +} +static struct attribute *wdt_attrs[] = { + &dev_attr_state.attr, + &dev_attr_identity.attr, + &dev_attr_timeout.attr, + &dev_attr_pretimeout.attr, + &dev_attr_timeleft.attr, + &dev_attr_bootstatus.attr, + &dev_attr_status.attr, + &dev_attr_nowayout.attr, + &dev_attr_pretimeout_governor.attr, + &dev_attr_pretimeout_available_governors.attr, + NULL, +}; + +static const struct attribute_group wdt_group = { + .attrs = wdt_attrs, + .is_visible = wdt_is_visible, +}; +__ATTRIBUTE_GROUPS(wdt); +#else +#define wdt_groups NULL +#endif + +/* + * watchdog_ioctl_op: call the watchdog drivers ioctl op if defined + * @wdd: the watchdog device to do the ioctl on + * @cmd: watchdog command + * @arg: argument pointer + * + * The caller must hold wd_data->lock. + */ + +static int watchdog_ioctl_op(struct watchdog_device *wdd, unsigned int cmd, + unsigned long arg) +{ + if (!wdd->ops->ioctl) + return -ENOIOCTLCMD; + + return wdd->ops->ioctl(wdd, cmd, arg); +} + +/* + * watchdog_write: writes to the watchdog. + * @file: file from VFS + * @data: user address of data + * @len: length of data + * @ppos: pointer to the file offset + * + * A write to a watchdog device is defined as a keepalive ping. + * Writing the magic 'V' sequence allows the next close to turn + * off the watchdog (if 'nowayout' is not set). + */ + +static ssize_t watchdog_write(struct file *file, const char __user *data, + size_t len, loff_t *ppos) +{ + struct watchdog_core_data *wd_data = file->private_data; + struct watchdog_device *wdd; + int err; + size_t i; + char c; + + if (len == 0) + return 0; + + /* + * Note: just in case someone wrote the magic character + * five months ago... + */ + clear_bit(_WDOG_ALLOW_RELEASE, &wd_data->status); + + /* scan to see whether or not we got the magic character */ + for (i = 0; i != len; i++) { + if (get_user(c, data + i)) + return -EFAULT; + if (c == 'V') + set_bit(_WDOG_ALLOW_RELEASE, &wd_data->status); + } + + /* someone wrote to us, so we send the watchdog a keepalive ping */ + + err = -ENODEV; + mutex_lock(&wd_data->lock); + wdd = wd_data->wdd; + if (wdd) + err = watchdog_ping(wdd); + mutex_unlock(&wd_data->lock); + + if (err < 0) + return err; + + return len; +} + +/* + * watchdog_ioctl: handle the different ioctl's for the watchdog device. + * @file: file handle to the device + * @cmd: watchdog command + * @arg: argument pointer + * + * The watchdog API defines a common set of functions for all watchdogs + * according to their available features. + */ + +static long watchdog_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) +{ + struct watchdog_core_data *wd_data = file->private_data; + void __user *argp = (void __user *)arg; + struct watchdog_device *wdd; + int __user *p = argp; + unsigned int val; + int err; + + mutex_lock(&wd_data->lock); + + wdd = wd_data->wdd; + if (!wdd) { + err = -ENODEV; + goto out_ioctl; + } + + err = watchdog_ioctl_op(wdd, cmd, arg); + if (err != -ENOIOCTLCMD) + goto out_ioctl; + + switch (cmd) { + case WDIOC_GETSUPPORT: + err = copy_to_user(argp, wdd->info, + sizeof(struct watchdog_info)) ? -EFAULT : 0; + break; + case WDIOC_GETSTATUS: + val = watchdog_get_status(wdd); + err = put_user(val, p); + break; + case WDIOC_GETBOOTSTATUS: + err = put_user(wdd->bootstatus, p); + break; + case WDIOC_SETOPTIONS: + if (get_user(val, p)) { + err = -EFAULT; + break; + } + if (val & WDIOS_DISABLECARD) { + err = watchdog_stop(wdd); + if (err < 0) + break; + } + if (val & WDIOS_ENABLECARD) + err = watchdog_start(wdd); + break; + case WDIOC_KEEPALIVE: + if (!(wdd->info->options & WDIOF_KEEPALIVEPING)) { + err = -EOPNOTSUPP; + break; + } + err = watchdog_ping(wdd); + break; + case WDIOC_SETTIMEOUT: + if (get_user(val, p)) { + err = -EFAULT; + break; + } + err = watchdog_set_timeout(wdd, val); + if (err < 0) + break; + /* If the watchdog is active then we send a keepalive ping + * to make sure that the watchdog keep's running (and if + * possible that it takes the new timeout) */ + err = watchdog_ping(wdd); + if (err < 0) + break; + /* fall through */ + case WDIOC_GETTIMEOUT: + /* timeout == 0 means that we don't know the timeout */ + if (wdd->timeout == 0) { + err = -EOPNOTSUPP; + break; + } + err = put_user(wdd->timeout, p); + break; + case WDIOC_GETTIMELEFT: + err = watchdog_get_timeleft(wdd, &val); + if (err < 0) + break; + err = put_user(val, p); + break; + case WDIOC_SETPRETIMEOUT: + if (get_user(val, p)) { + err = -EFAULT; + break; + } + err = watchdog_set_pretimeout(wdd, val); + break; + case WDIOC_GETPRETIMEOUT: + err = put_user(wdd->pretimeout, p); + break; + default: + err = -ENOTTY; + break; + } + +out_ioctl: + mutex_unlock(&wd_data->lock); + return err; +} + +/* + * watchdog_open: open the /dev/watchdog* devices. + * @inode: inode of device + * @file: file handle to device + * + * When the /dev/watchdog* device gets opened, we start the watchdog. + * Watch out: the /dev/watchdog device is single open, so we make sure + * it can only be opened once. + */ + +static int watchdog_open(struct inode *inode, struct file *file) +{ + struct watchdog_core_data *wd_data; + struct watchdog_device *wdd; + bool hw_running; + int err; + + /* Get the corresponding watchdog device */ + if (imajor(inode) == MISC_MAJOR) + wd_data = old_wd_data; + else + wd_data = container_of(inode->i_cdev, struct watchdog_core_data, + cdev); + + /* the watchdog is single open! */ + if (test_and_set_bit(_WDOG_DEV_OPEN, &wd_data->status)) + return -EBUSY; + + wdd = wd_data->wdd; + + /* + * If the /dev/watchdog device is open, we don't want the module + * to be unloaded. + */ + hw_running = watchdog_hw_running(wdd); + if (!hw_running && !try_module_get(wdd->ops->owner)) { + err = -EBUSY; + goto out_clear; + } + + err = watchdog_start(wdd); + if (err < 0) + goto out_mod; + + file->private_data = wd_data; + + if (!hw_running) + get_device(&wd_data->dev); + + /* dev/watchdog is a virtual (and thus non-seekable) filesystem */ + return nonseekable_open(inode, file); + +out_mod: + module_put(wd_data->wdd->ops->owner); +out_clear: + clear_bit(_WDOG_DEV_OPEN, &wd_data->status); + return err; +} + +static void watchdog_core_data_release(struct device *dev) +{ + struct watchdog_core_data *wd_data; + + wd_data = container_of(dev, struct watchdog_core_data, dev); + + kfree(wd_data); +} + +/* + * watchdog_release: release the watchdog device. + * @inode: inode of device + * @file: file handle to device + * + * This is the code for when /dev/watchdog gets closed. We will only + * stop the watchdog when we have received the magic char (and nowayout + * was not set), else the watchdog will keep running. + */ + +static int watchdog_release(struct inode *inode, struct file *file) +{ + struct watchdog_core_data *wd_data = file->private_data; + struct watchdog_device *wdd; + int err = -EBUSY; + bool running; + + mutex_lock(&wd_data->lock); + + wdd = wd_data->wdd; + if (!wdd) + goto done; + + /* + * We only stop the watchdog if we received the magic character + * or if WDIOF_MAGICCLOSE is not set. If nowayout was set then + * watchdog_stop will fail. + */ + if (!test_bit(WDOG_ACTIVE, &wdd->status)) + err = 0; + else if (test_and_clear_bit(_WDOG_ALLOW_RELEASE, &wd_data->status) || + !(wdd->info->options & WDIOF_MAGICCLOSE)) + err = watchdog_stop(wdd); + + /* If the watchdog was not stopped, send a keepalive ping */ + if (err < 0) { + pr_crit("watchdog%d: watchdog did not stop!\n", wdd->id); + watchdog_ping(wdd); + } + + watchdog_update_worker(wdd); + + /* make sure that /dev/watchdog can be re-opened */ + clear_bit(_WDOG_DEV_OPEN, &wd_data->status); + +done: + running = wdd && watchdog_hw_running(wdd); + mutex_unlock(&wd_data->lock); + /* + * Allow the owner module to be unloaded again unless the watchdog + * is still running. If the watchdog is still running, it can not + * be stopped, and its driver must not be unloaded. + */ + if (!running) { + module_put(wd_data->cdev.owner); + put_device(&wd_data->dev); + } + return 0; +} + +static const struct file_operations watchdog_fops = { + .owner = THIS_MODULE, + .write = watchdog_write, + .unlocked_ioctl = watchdog_ioctl, + .open = watchdog_open, + .release = watchdog_release, +}; + +static struct miscdevice watchdog_miscdev = { + .minor = WATCHDOG_MINOR, + .name = "watchdog", + .fops = &watchdog_fops, +}; + +static struct class watchdog_class = { + .name = "watchdog", + .owner = THIS_MODULE, + .dev_groups = wdt_groups, +}; + +/* + * watchdog_cdev_register: register watchdog character device + * @wdd: watchdog device + * + * Register a watchdog character device including handling the legacy + * /dev/watchdog node. /dev/watchdog is actually a miscdevice and + * thus we set it up like that. + */ + +static int watchdog_cdev_register(struct watchdog_device *wdd) +{ + struct watchdog_core_data *wd_data; + int err; + + wd_data = kzalloc(sizeof(struct watchdog_core_data), GFP_KERNEL); + if (!wd_data) + return -ENOMEM; + mutex_init(&wd_data->lock); + + wd_data->wdd = wdd; + wdd->wd_data = wd_data; + + if (IS_ERR_OR_NULL(watchdog_kworker)) { + kfree(wd_data); + return -ENODEV; + } + + device_initialize(&wd_data->dev); + wd_data->dev.devt = MKDEV(MAJOR(watchdog_devt), wdd->id); + wd_data->dev.class = &watchdog_class; + wd_data->dev.parent = wdd->parent; + wd_data->dev.groups = wdd->groups; + wd_data->dev.release = watchdog_core_data_release; + dev_set_drvdata(&wd_data->dev, wdd); + dev_set_name(&wd_data->dev, "watchdog%d", wdd->id); + + kthread_init_work(&wd_data->work, watchdog_ping_work); + hrtimer_init(&wd_data->timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL); + wd_data->timer.function = watchdog_timer_expired; + + if (wdd->id == 0) { + old_wd_data = wd_data; + watchdog_miscdev.parent = wdd->parent; + err = misc_register(&watchdog_miscdev); + if (err != 0) { + pr_err("%s: cannot register miscdev on minor=%d (err=%d).\n", + wdd->info->identity, WATCHDOG_MINOR, err); + if (err == -EBUSY) + pr_err("%s: a legacy watchdog module is probably present.\n", + wdd->info->identity); + old_wd_data = NULL; + put_device(&wd_data->dev); + return err; + } + } + + /* Fill in the data structures */ + cdev_init(&wd_data->cdev, &watchdog_fops); + + /* Add the device */ + err = cdev_device_add(&wd_data->cdev, &wd_data->dev); + if (err) { + pr_err("watchdog%d unable to add device %d:%d\n", + wdd->id, MAJOR(watchdog_devt), wdd->id); + if (wdd->id == 0) { + misc_deregister(&watchdog_miscdev); + old_wd_data = NULL; + put_device(&wd_data->dev); + } + return err; + } + + wd_data->cdev.owner = wdd->ops->owner; + + /* Record time of most recent heartbeat as 'just before now'. */ + wd_data->last_hw_keepalive = ktime_sub(ktime_get(), 1); + + /* + * If the watchdog is running, prevent its driver from being unloaded, + * and schedule an immediate ping. + */ + if (watchdog_hw_running(wdd)) { + __module_get(wdd->ops->owner); + get_device(&wd_data->dev); + if (handle_boot_enabled) + hrtimer_start(&wd_data->timer, 0, HRTIMER_MODE_REL); + else + pr_info("watchdog%d running and kernel based pre-userspace handler disabled\n", + wdd->id); + } + + return 0; +} + +/* + * watchdog_cdev_unregister: unregister watchdog character device + * @watchdog: watchdog device + * + * Unregister watchdog character device and if needed the legacy + * /dev/watchdog device. + */ + +static void watchdog_cdev_unregister(struct watchdog_device *wdd) +{ + struct watchdog_core_data *wd_data = wdd->wd_data; + + cdev_device_del(&wd_data->cdev, &wd_data->dev); + if (wdd->id == 0) { + misc_deregister(&watchdog_miscdev); + old_wd_data = NULL; + } + + if (watchdog_active(wdd) && + test_bit(WDOG_STOP_ON_UNREGISTER, &wdd->status)) { + watchdog_stop(wdd); + } + + mutex_lock(&wd_data->lock); + wd_data->wdd = NULL; + wdd->wd_data = NULL; + mutex_unlock(&wd_data->lock); + + hrtimer_cancel(&wd_data->timer); + kthread_cancel_work_sync(&wd_data->work); + + put_device(&wd_data->dev); +} + +/* + * watchdog_dev_register: register a watchdog device + * @wdd: watchdog device + * + * Register a watchdog device including handling the legacy + * /dev/watchdog node. /dev/watchdog is actually a miscdevice and + * thus we set it up like that. + */ + +int watchdog_dev_register(struct watchdog_device *wdd) +{ + int ret; + + ret = watchdog_cdev_register(wdd); + if (ret) + return ret; + + ret = watchdog_register_pretimeout(wdd); + if (ret) + watchdog_cdev_unregister(wdd); + + return ret; +} + +/* + * watchdog_dev_unregister: unregister a watchdog device + * @watchdog: watchdog device + * + * Unregister watchdog device and if needed the legacy + * /dev/watchdog device. + */ + +void watchdog_dev_unregister(struct watchdog_device *wdd) +{ + watchdog_unregister_pretimeout(wdd); + watchdog_cdev_unregister(wdd); +} + +/* + * watchdog_dev_init: init dev part of watchdog core + * + * Allocate a range of chardev nodes to use for watchdog devices + */ + +int __init watchdog_dev_init(void) +{ + int err; + struct sched_param param = {.sched_priority = MAX_RT_PRIO - 1,}; + + watchdog_kworker = kthread_create_worker(0, "watchdogd"); + if (IS_ERR(watchdog_kworker)) { + pr_err("Failed to create watchdog kworker\n"); + return PTR_ERR(watchdog_kworker); + } + sched_setscheduler(watchdog_kworker->task, SCHED_FIFO, ¶m); + + err = class_register(&watchdog_class); + if (err < 0) { + pr_err("couldn't register class\n"); + goto err_register; + } + + err = alloc_chrdev_region(&watchdog_devt, 0, MAX_DOGS, "watchdog"); + if (err < 0) { + pr_err("watchdog: unable to allocate char dev region\n"); + goto err_alloc; + } + + return 0; + +err_alloc: + class_unregister(&watchdog_class); +err_register: + kthread_destroy_worker(watchdog_kworker); + return err; +} + +/* + * watchdog_dev_exit: exit dev part of watchdog core + * + * Release the range of chardev nodes used for watchdog devices + */ + +void __exit watchdog_dev_exit(void) +{ + unregister_chrdev_region(watchdog_devt, MAX_DOGS); + class_unregister(&watchdog_class); + kthread_destroy_worker(watchdog_kworker); +} + +module_param(handle_boot_enabled, bool, 0444); +MODULE_PARM_DESC(handle_boot_enabled, + "Watchdog core auto-updates boot enabled watchdogs before userspace takes over (default=" + __MODULE_STRING(IS_ENABLED(CONFIG_WATCHDOG_HANDLE_BOOT_ENABLED)) ")"); diff --git a/drivers/watchdog/watchdog_pretimeout.c b/drivers/watchdog/watchdog_pretimeout.c new file mode 100644 index 000000000..9db07bfb4 --- /dev/null +++ b/drivers/watchdog/watchdog_pretimeout.c @@ -0,0 +1,220 @@ +/* + * Copyright (C) 2015-2016 Mentor Graphics + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + */ + +#include <linux/list.h> +#include <linux/slab.h> +#include <linux/spinlock.h> +#include <linux/string.h> +#include <linux/watchdog.h> + +#include "watchdog_pretimeout.h" + +/* Default watchdog pretimeout governor */ +static struct watchdog_governor *default_gov; + +/* The spinlock protects default_gov, wdd->gov and pretimeout_list */ +static DEFINE_SPINLOCK(pretimeout_lock); + +/* List of watchdog devices, which can generate a pretimeout event */ +static LIST_HEAD(pretimeout_list); + +struct watchdog_pretimeout { + struct watchdog_device *wdd; + struct list_head entry; +}; + +/* The mutex protects governor list and serializes external interfaces */ +static DEFINE_MUTEX(governor_lock); + +/* List of the registered watchdog pretimeout governors */ +static LIST_HEAD(governor_list); + +struct governor_priv { + struct watchdog_governor *gov; + struct list_head entry; +}; + +static struct governor_priv *find_governor_by_name(const char *gov_name) +{ + struct governor_priv *priv; + + list_for_each_entry(priv, &governor_list, entry) + if (sysfs_streq(gov_name, priv->gov->name)) + return priv; + + return NULL; +} + +int watchdog_pretimeout_available_governors_get(char *buf) +{ + struct governor_priv *priv; + int count = 0; + + mutex_lock(&governor_lock); + + list_for_each_entry(priv, &governor_list, entry) + count += sprintf(buf + count, "%s\n", priv->gov->name); + + mutex_unlock(&governor_lock); + + return count; +} + +int watchdog_pretimeout_governor_get(struct watchdog_device *wdd, char *buf) +{ + int count = 0; + + spin_lock_irq(&pretimeout_lock); + if (wdd->gov) + count = sprintf(buf, "%s\n", wdd->gov->name); + spin_unlock_irq(&pretimeout_lock); + + return count; +} + +int watchdog_pretimeout_governor_set(struct watchdog_device *wdd, + const char *buf) +{ + struct governor_priv *priv; + + mutex_lock(&governor_lock); + + priv = find_governor_by_name(buf); + if (!priv) { + mutex_unlock(&governor_lock); + return -EINVAL; + } + + spin_lock_irq(&pretimeout_lock); + wdd->gov = priv->gov; + spin_unlock_irq(&pretimeout_lock); + + mutex_unlock(&governor_lock); + + return 0; +} + +void watchdog_notify_pretimeout(struct watchdog_device *wdd) +{ + unsigned long flags; + + spin_lock_irqsave(&pretimeout_lock, flags); + if (!wdd->gov) { + spin_unlock_irqrestore(&pretimeout_lock, flags); + return; + } + + wdd->gov->pretimeout(wdd); + spin_unlock_irqrestore(&pretimeout_lock, flags); +} +EXPORT_SYMBOL_GPL(watchdog_notify_pretimeout); + +int watchdog_register_governor(struct watchdog_governor *gov) +{ + struct watchdog_pretimeout *p; + struct governor_priv *priv; + + priv = kzalloc(sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + mutex_lock(&governor_lock); + + if (find_governor_by_name(gov->name)) { + mutex_unlock(&governor_lock); + kfree(priv); + return -EBUSY; + } + + priv->gov = gov; + list_add(&priv->entry, &governor_list); + + if (!strncmp(gov->name, WATCHDOG_PRETIMEOUT_DEFAULT_GOV, + WATCHDOG_GOV_NAME_MAXLEN)) { + spin_lock_irq(&pretimeout_lock); + default_gov = gov; + + list_for_each_entry(p, &pretimeout_list, entry) + if (!p->wdd->gov) + p->wdd->gov = default_gov; + spin_unlock_irq(&pretimeout_lock); + } + + mutex_unlock(&governor_lock); + + return 0; +} +EXPORT_SYMBOL(watchdog_register_governor); + +void watchdog_unregister_governor(struct watchdog_governor *gov) +{ + struct watchdog_pretimeout *p; + struct governor_priv *priv, *t; + + mutex_lock(&governor_lock); + + list_for_each_entry_safe(priv, t, &governor_list, entry) { + if (priv->gov == gov) { + list_del(&priv->entry); + kfree(priv); + break; + } + } + + spin_lock_irq(&pretimeout_lock); + list_for_each_entry(p, &pretimeout_list, entry) + if (p->wdd->gov == gov) + p->wdd->gov = default_gov; + spin_unlock_irq(&pretimeout_lock); + + mutex_unlock(&governor_lock); +} +EXPORT_SYMBOL(watchdog_unregister_governor); + +int watchdog_register_pretimeout(struct watchdog_device *wdd) +{ + struct watchdog_pretimeout *p; + + if (!(wdd->info->options & WDIOF_PRETIMEOUT)) + return 0; + + p = kzalloc(sizeof(*p), GFP_KERNEL); + if (!p) + return -ENOMEM; + + spin_lock_irq(&pretimeout_lock); + list_add(&p->entry, &pretimeout_list); + p->wdd = wdd; + wdd->gov = default_gov; + spin_unlock_irq(&pretimeout_lock); + + return 0; +} + +void watchdog_unregister_pretimeout(struct watchdog_device *wdd) +{ + struct watchdog_pretimeout *p, *t; + + if (!(wdd->info->options & WDIOF_PRETIMEOUT)) + return; + + spin_lock_irq(&pretimeout_lock); + wdd->gov = NULL; + + list_for_each_entry_safe(p, t, &pretimeout_list, entry) { + if (p->wdd == wdd) { + list_del(&p->entry); + break; + } + } + spin_unlock_irq(&pretimeout_lock); + + kfree(p); +} diff --git a/drivers/watchdog/watchdog_pretimeout.h b/drivers/watchdog/watchdog_pretimeout.h new file mode 100644 index 000000000..a3f1abc68 --- /dev/null +++ b/drivers/watchdog/watchdog_pretimeout.h @@ -0,0 +1,61 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef __WATCHDOG_PRETIMEOUT_H +#define __WATCHDOG_PRETIMEOUT_H + +#define WATCHDOG_GOV_NAME_MAXLEN 20 + +struct watchdog_device; + +struct watchdog_governor { + const char name[WATCHDOG_GOV_NAME_MAXLEN]; + void (*pretimeout)(struct watchdog_device *wdd); +}; + +#if IS_ENABLED(CONFIG_WATCHDOG_PRETIMEOUT_GOV) +/* Interfaces to watchdog pretimeout governors */ +int watchdog_register_governor(struct watchdog_governor *gov); +void watchdog_unregister_governor(struct watchdog_governor *gov); + +/* Interfaces to watchdog_dev.c */ +int watchdog_register_pretimeout(struct watchdog_device *wdd); +void watchdog_unregister_pretimeout(struct watchdog_device *wdd); +int watchdog_pretimeout_available_governors_get(char *buf); +int watchdog_pretimeout_governor_get(struct watchdog_device *wdd, char *buf); +int watchdog_pretimeout_governor_set(struct watchdog_device *wdd, + const char *buf); + +#if IS_ENABLED(CONFIG_WATCHDOG_PRETIMEOUT_DEFAULT_GOV_NOOP) +#define WATCHDOG_PRETIMEOUT_DEFAULT_GOV "noop" +#elif IS_ENABLED(CONFIG_WATCHDOG_PRETIMEOUT_DEFAULT_GOV_PANIC) +#define WATCHDOG_PRETIMEOUT_DEFAULT_GOV "panic" +#endif + +#else +static inline int watchdog_register_pretimeout(struct watchdog_device *wdd) +{ + return 0; +} + +static inline void watchdog_unregister_pretimeout(struct watchdog_device *wdd) +{ +} + +static inline int watchdog_pretimeout_available_governors_get(char *buf) +{ + return -EINVAL; +} + +static inline int watchdog_pretimeout_governor_get(struct watchdog_device *wdd, + char *buf) +{ + return -EINVAL; +} + +static inline int watchdog_pretimeout_governor_set(struct watchdog_device *wdd, + const char *buf) +{ + return -EINVAL; +} +#endif + +#endif diff --git a/drivers/watchdog/wd501p.h b/drivers/watchdog/wd501p.h new file mode 100644 index 000000000..0e3a497d5 --- /dev/null +++ b/drivers/watchdog/wd501p.h @@ -0,0 +1,51 @@ +/* + * Industrial Computer Source WDT500/501 driver + * + * (c) Copyright 1995 CymruNET Ltd + * Innovation Centre + * Singleton Park + * Swansea + * Wales + * UK + * SA2 8PP + * + * http://www.cymru.net + * + * This driver is provided under the GNU General Public License, + * incorporated herein by reference. The driver is provided without + * warranty or support. + * + * Release 0.04. + * + */ + + +#define WDT_COUNT0 (io+0) +#define WDT_COUNT1 (io+1) +#define WDT_COUNT2 (io+2) +#define WDT_CR (io+3) +#define WDT_SR (io+4) /* Start buzzer on PCI write */ +#define WDT_RT (io+5) /* Stop buzzer on PCI write */ +#define WDT_BUZZER (io+6) /* PCI only: rd=disable, wr=enable */ +#define WDT_DC (io+7) + +/* The following are only on the PCI card, they're outside of I/O space on + * the ISA card: */ +#define WDT_CLOCK (io+12) /* COUNT2: rd=16.67MHz, wr=2.0833MHz */ +/* inverted opto isolated reset output: */ +#define WDT_OPTONOTRST (io+13) /* wr=enable, rd=disable */ +/* opto isolated reset output: */ +#define WDT_OPTORST (io+14) /* wr=enable, rd=disable */ +/* programmable outputs: */ +#define WDT_PROGOUT (io+15) /* wr=enable, rd=disable */ + + /* FAN 501 500 */ +#define WDC_SR_WCCR 1 /* Active low */ /* X X X */ +#define WDC_SR_TGOOD 2 /* X X - */ +#define WDC_SR_ISOI0 4 /* X X X */ +#define WDC_SR_ISII1 8 /* X X X */ +#define WDC_SR_FANGOOD 16 /* X - - */ +#define WDC_SR_PSUOVER 32 /* Active low */ /* X X - */ +#define WDC_SR_PSUUNDR 64 /* Active low */ /* X X - */ +#define WDC_SR_IRQ 128 /* Active low */ /* X X X */ + diff --git a/drivers/watchdog/wdat_wdt.c b/drivers/watchdog/wdat_wdt.c new file mode 100644 index 000000000..9d91ed596 --- /dev/null +++ b/drivers/watchdog/wdat_wdt.c @@ -0,0 +1,528 @@ +/* + * ACPI Hardware Watchdog (WDAT) driver. + * + * Copyright (C) 2016, Intel Corporation + * Author: Mika Westerberg <mika.westerberg@linux.intel.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/acpi.h> +#include <linux/ioport.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/pm.h> +#include <linux/watchdog.h> + +#define MAX_WDAT_ACTIONS ACPI_WDAT_ACTION_RESERVED + +/** + * struct wdat_instruction - Single ACPI WDAT instruction + * @entry: Copy of the ACPI table instruction + * @reg: Register the instruction is accessing + * @node: Next instruction in action sequence + */ +struct wdat_instruction { + struct acpi_wdat_entry entry; + void __iomem *reg; + struct list_head node; +}; + +/** + * struct wdat_wdt - ACPI WDAT watchdog device + * @pdev: Parent platform device + * @wdd: Watchdog core device + * @period: How long is one watchdog period in ms + * @stopped_in_sleep: Is this watchdog stopped by the firmware in S1-S5 + * @stopped: Was the watchdog stopped by the driver in suspend + * @actions: An array of instruction lists indexed by an action number from + * the WDAT table. There can be %NULL entries for not implemented + * actions. + */ +struct wdat_wdt { + struct platform_device *pdev; + struct watchdog_device wdd; + unsigned int period; + bool stopped_in_sleep; + bool stopped; + struct list_head *instructions[MAX_WDAT_ACTIONS]; +}; + +#define to_wdat_wdt(wdd) container_of(wdd, struct wdat_wdt, wdd) + +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); +MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); + +static int wdat_wdt_read(struct wdat_wdt *wdat, + const struct wdat_instruction *instr, u32 *value) +{ + const struct acpi_generic_address *gas = &instr->entry.register_region; + + switch (gas->access_width) { + case 1: + *value = ioread8(instr->reg); + break; + case 2: + *value = ioread16(instr->reg); + break; + case 3: + *value = ioread32(instr->reg); + break; + default: + return -EINVAL; + } + + dev_dbg(&wdat->pdev->dev, "Read %#x from 0x%08llx\n", *value, + gas->address); + + return 0; +} + +static int wdat_wdt_write(struct wdat_wdt *wdat, + const struct wdat_instruction *instr, u32 value) +{ + const struct acpi_generic_address *gas = &instr->entry.register_region; + + switch (gas->access_width) { + case 1: + iowrite8((u8)value, instr->reg); + break; + case 2: + iowrite16((u16)value, instr->reg); + break; + case 3: + iowrite32(value, instr->reg); + break; + default: + return -EINVAL; + } + + dev_dbg(&wdat->pdev->dev, "Wrote %#x to 0x%08llx\n", value, + gas->address); + + return 0; +} + +static int wdat_wdt_run_action(struct wdat_wdt *wdat, unsigned int action, + u32 param, u32 *retval) +{ + struct wdat_instruction *instr; + + if (action >= ARRAY_SIZE(wdat->instructions)) + return -EINVAL; + + if (!wdat->instructions[action]) + return -EOPNOTSUPP; + + dev_dbg(&wdat->pdev->dev, "Running action %#x\n", action); + + /* Run each instruction sequentially */ + list_for_each_entry(instr, wdat->instructions[action], node) { + const struct acpi_wdat_entry *entry = &instr->entry; + const struct acpi_generic_address *gas; + u32 flags, value, mask, x, y; + bool preserve; + int ret; + + gas = &entry->register_region; + + preserve = entry->instruction & ACPI_WDAT_PRESERVE_REGISTER; + flags = entry->instruction & ~ACPI_WDAT_PRESERVE_REGISTER; + value = entry->value; + mask = entry->mask; + + switch (flags) { + case ACPI_WDAT_READ_VALUE: + ret = wdat_wdt_read(wdat, instr, &x); + if (ret) + return ret; + x >>= gas->bit_offset; + x &= mask; + if (retval) + *retval = x == value; + break; + + case ACPI_WDAT_READ_COUNTDOWN: + ret = wdat_wdt_read(wdat, instr, &x); + if (ret) + return ret; + x >>= gas->bit_offset; + x &= mask; + if (retval) + *retval = x; + break; + + case ACPI_WDAT_WRITE_VALUE: + x = value & mask; + x <<= gas->bit_offset; + if (preserve) { + ret = wdat_wdt_read(wdat, instr, &y); + if (ret) + return ret; + y = y & ~(mask << gas->bit_offset); + x |= y; + } + ret = wdat_wdt_write(wdat, instr, x); + if (ret) + return ret; + break; + + case ACPI_WDAT_WRITE_COUNTDOWN: + x = param; + x &= mask; + x <<= gas->bit_offset; + if (preserve) { + ret = wdat_wdt_read(wdat, instr, &y); + if (ret) + return ret; + y = y & ~(mask << gas->bit_offset); + x |= y; + } + ret = wdat_wdt_write(wdat, instr, x); + if (ret) + return ret; + break; + + default: + dev_err(&wdat->pdev->dev, "Unknown instruction: %u\n", + flags); + return -EINVAL; + } + } + + return 0; +} + +static int wdat_wdt_enable_reboot(struct wdat_wdt *wdat) +{ + int ret; + + /* + * WDAT specification says that the watchdog is required to reboot + * the system when it fires. However, it also states that it is + * recommeded to make it configurable through hardware register. We + * enable reboot now if it is configrable, just in case. + */ + ret = wdat_wdt_run_action(wdat, ACPI_WDAT_SET_REBOOT, 0, NULL); + if (ret && ret != -EOPNOTSUPP) { + dev_err(&wdat->pdev->dev, + "Failed to enable reboot when watchdog triggers\n"); + return ret; + } + + return 0; +} + +static void wdat_wdt_boot_status(struct wdat_wdt *wdat) +{ + u32 boot_status = 0; + int ret; + + ret = wdat_wdt_run_action(wdat, ACPI_WDAT_GET_STATUS, 0, &boot_status); + if (ret && ret != -EOPNOTSUPP) { + dev_err(&wdat->pdev->dev, "Failed to read boot status\n"); + return; + } + + if (boot_status) + wdat->wdd.bootstatus = WDIOF_CARDRESET; + + /* Clear the boot status in case BIOS did not do it */ + ret = wdat_wdt_run_action(wdat, ACPI_WDAT_SET_STATUS, 0, NULL); + if (ret && ret != -EOPNOTSUPP) + dev_err(&wdat->pdev->dev, "Failed to clear boot status\n"); +} + +static void wdat_wdt_set_running(struct wdat_wdt *wdat) +{ + u32 running = 0; + int ret; + + ret = wdat_wdt_run_action(wdat, ACPI_WDAT_GET_RUNNING_STATE, 0, + &running); + if (ret && ret != -EOPNOTSUPP) + dev_err(&wdat->pdev->dev, "Failed to read running state\n"); + + if (running) + set_bit(WDOG_HW_RUNNING, &wdat->wdd.status); +} + +static int wdat_wdt_start(struct watchdog_device *wdd) +{ + return wdat_wdt_run_action(to_wdat_wdt(wdd), + ACPI_WDAT_SET_RUNNING_STATE, 0, NULL); +} + +static int wdat_wdt_stop(struct watchdog_device *wdd) +{ + return wdat_wdt_run_action(to_wdat_wdt(wdd), + ACPI_WDAT_SET_STOPPED_STATE, 0, NULL); +} + +static int wdat_wdt_ping(struct watchdog_device *wdd) +{ + return wdat_wdt_run_action(to_wdat_wdt(wdd), ACPI_WDAT_RESET, 0, NULL); +} + +static int wdat_wdt_set_timeout(struct watchdog_device *wdd, + unsigned int timeout) +{ + struct wdat_wdt *wdat = to_wdat_wdt(wdd); + unsigned int periods; + int ret; + + periods = timeout * 1000 / wdat->period; + ret = wdat_wdt_run_action(wdat, ACPI_WDAT_SET_COUNTDOWN, periods, NULL); + if (!ret) + wdd->timeout = timeout; + return ret; +} + +static unsigned int wdat_wdt_get_timeleft(struct watchdog_device *wdd) +{ + struct wdat_wdt *wdat = to_wdat_wdt(wdd); + u32 periods = 0; + + wdat_wdt_run_action(wdat, ACPI_WDAT_GET_COUNTDOWN, 0, &periods); + return periods * wdat->period / 1000; +} + +static const struct watchdog_info wdat_wdt_info = { + .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE, + .firmware_version = 0, + .identity = "wdat_wdt", +}; + +static const struct watchdog_ops wdat_wdt_ops = { + .owner = THIS_MODULE, + .start = wdat_wdt_start, + .stop = wdat_wdt_stop, + .ping = wdat_wdt_ping, + .set_timeout = wdat_wdt_set_timeout, + .get_timeleft = wdat_wdt_get_timeleft, +}; + +static int wdat_wdt_probe(struct platform_device *pdev) +{ + const struct acpi_wdat_entry *entries; + const struct acpi_table_wdat *tbl; + struct wdat_wdt *wdat; + struct resource *res; + void __iomem **regs; + acpi_status status; + int i, ret; + + status = acpi_get_table(ACPI_SIG_WDAT, 0, + (struct acpi_table_header **)&tbl); + if (ACPI_FAILURE(status)) + return -ENODEV; + + wdat = devm_kzalloc(&pdev->dev, sizeof(*wdat), GFP_KERNEL); + if (!wdat) + return -ENOMEM; + + regs = devm_kcalloc(&pdev->dev, pdev->num_resources, sizeof(*regs), + GFP_KERNEL); + if (!regs) + return -ENOMEM; + + /* WDAT specification wants to have >= 1ms period */ + if (tbl->timer_period < 1) + return -EINVAL; + if (tbl->min_count > tbl->max_count) + return -EINVAL; + + wdat->period = tbl->timer_period; + wdat->wdd.min_hw_heartbeat_ms = wdat->period * tbl->min_count; + wdat->wdd.max_hw_heartbeat_ms = wdat->period * tbl->max_count; + wdat->stopped_in_sleep = tbl->flags & ACPI_WDAT_STOPPED; + wdat->wdd.info = &wdat_wdt_info; + wdat->wdd.ops = &wdat_wdt_ops; + wdat->pdev = pdev; + + /* Request and map all resources */ + for (i = 0; i < pdev->num_resources; i++) { + void __iomem *reg; + + res = &pdev->resource[i]; + if (resource_type(res) == IORESOURCE_MEM) { + reg = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(reg)) + return PTR_ERR(reg); + } else if (resource_type(res) == IORESOURCE_IO) { + reg = devm_ioport_map(&pdev->dev, res->start, 1); + if (!reg) + return -ENOMEM; + } else { + dev_err(&pdev->dev, "Unsupported resource\n"); + return -EINVAL; + } + + regs[i] = reg; + } + + entries = (struct acpi_wdat_entry *)(tbl + 1); + for (i = 0; i < tbl->entries; i++) { + const struct acpi_generic_address *gas; + struct wdat_instruction *instr; + struct list_head *instructions; + unsigned int action; + struct resource r; + int j; + + action = entries[i].action; + if (action >= MAX_WDAT_ACTIONS) { + dev_dbg(&pdev->dev, "Skipping unknown action: %u\n", + action); + continue; + } + + instr = devm_kzalloc(&pdev->dev, sizeof(*instr), GFP_KERNEL); + if (!instr) + return -ENOMEM; + + INIT_LIST_HEAD(&instr->node); + instr->entry = entries[i]; + + gas = &entries[i].register_region; + + memset(&r, 0, sizeof(r)); + r.start = gas->address; + r.end = r.start + ACPI_ACCESS_BYTE_WIDTH(gas->access_width) - 1; + if (gas->space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY) { + r.flags = IORESOURCE_MEM; + } else if (gas->space_id == ACPI_ADR_SPACE_SYSTEM_IO) { + r.flags = IORESOURCE_IO; + } else { + dev_dbg(&pdev->dev, "Unsupported address space: %d\n", + gas->space_id); + continue; + } + + /* Find the matching resource */ + for (j = 0; j < pdev->num_resources; j++) { + res = &pdev->resource[j]; + if (resource_contains(res, &r)) { + instr->reg = regs[j] + r.start - res->start; + break; + } + } + + if (!instr->reg) { + dev_err(&pdev->dev, "I/O resource not found\n"); + return -EINVAL; + } + + instructions = wdat->instructions[action]; + if (!instructions) { + instructions = devm_kzalloc(&pdev->dev, + sizeof(*instructions), GFP_KERNEL); + if (!instructions) + return -ENOMEM; + + INIT_LIST_HEAD(instructions); + wdat->instructions[action] = instructions; + } + + list_add_tail(&instr->node, instructions); + } + + wdat_wdt_boot_status(wdat); + wdat_wdt_set_running(wdat); + + ret = wdat_wdt_enable_reboot(wdat); + if (ret) + return ret; + + platform_set_drvdata(pdev, wdat); + + watchdog_set_nowayout(&wdat->wdd, nowayout); + return devm_watchdog_register_device(&pdev->dev, &wdat->wdd); +} + +#ifdef CONFIG_PM_SLEEP +static int wdat_wdt_suspend_noirq(struct device *dev) +{ + struct wdat_wdt *wdat = dev_get_drvdata(dev); + int ret; + + if (!watchdog_active(&wdat->wdd)) + return 0; + + /* + * We need to stop the watchdog if firmare is not doing it or if we + * are going suspend to idle (where firmware is not involved). If + * firmware is stopping the watchdog we kick it here one more time + * to give it some time. + */ + wdat->stopped = false; + if (acpi_target_system_state() == ACPI_STATE_S0 || + !wdat->stopped_in_sleep) { + ret = wdat_wdt_stop(&wdat->wdd); + if (!ret) + wdat->stopped = true; + } else { + ret = wdat_wdt_ping(&wdat->wdd); + } + + return ret; +} + +static int wdat_wdt_resume_noirq(struct device *dev) +{ + struct wdat_wdt *wdat = dev_get_drvdata(dev); + int ret; + + if (!watchdog_active(&wdat->wdd)) + return 0; + + if (!wdat->stopped) { + /* + * Looks like the boot firmware reinitializes the watchdog + * before it hands off to the OS on resume from sleep so we + * stop and reprogram the watchdog here. + */ + ret = wdat_wdt_stop(&wdat->wdd); + if (ret) + return ret; + + ret = wdat_wdt_set_timeout(&wdat->wdd, wdat->wdd.timeout); + if (ret) + return ret; + + ret = wdat_wdt_enable_reboot(wdat); + if (ret) + return ret; + + ret = wdat_wdt_ping(&wdat->wdd); + if (ret) + return ret; + } + + return wdat_wdt_start(&wdat->wdd); +} +#endif + +static const struct dev_pm_ops wdat_wdt_pm_ops = { + SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(wdat_wdt_suspend_noirq, + wdat_wdt_resume_noirq) +}; + +static struct platform_driver wdat_wdt_driver = { + .probe = wdat_wdt_probe, + .driver = { + .name = "wdat_wdt", + .pm = &wdat_wdt_pm_ops, + }, +}; + +module_platform_driver(wdat_wdt_driver); + +MODULE_AUTHOR("Mika Westerberg <mika.westerberg@linux.intel.com>"); +MODULE_DESCRIPTION("ACPI Hardware Watchdog (WDAT) driver"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:wdat_wdt"); diff --git a/drivers/watchdog/wdrtas.c b/drivers/watchdog/wdrtas.c new file mode 100644 index 000000000..0240c60d1 --- /dev/null +++ b/drivers/watchdog/wdrtas.c @@ -0,0 +1,640 @@ +/* + * FIXME: add wdrtas_get_status and wdrtas_get_boot_status as soon as + * RTAS calls are available + */ + +/* + * RTAS watchdog driver + * + * (C) Copyright IBM Corp. 2005 + * device driver to exploit watchdog RTAS functions + * + * Authors : Utz Bacher <utz.bacher@de.ibm.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/fs.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/miscdevice.h> +#include <linux/module.h> +#include <linux/notifier.h> +#include <linux/reboot.h> +#include <linux/types.h> +#include <linux/watchdog.h> +#include <linux/uaccess.h> + +#include <asm/rtas.h> + +#define WDRTAS_MAGIC_CHAR 42 +#define WDRTAS_SUPPORTED_MASK (WDIOF_SETTIMEOUT | \ + WDIOF_MAGICCLOSE) + +MODULE_AUTHOR("Utz Bacher <utz.bacher@de.ibm.com>"); +MODULE_DESCRIPTION("RTAS watchdog driver"); +MODULE_LICENSE("GPL"); + +static bool wdrtas_nowayout = WATCHDOG_NOWAYOUT; +static atomic_t wdrtas_miscdev_open = ATOMIC_INIT(0); +static char wdrtas_expect_close; + +static int wdrtas_interval; + +#define WDRTAS_THERMAL_SENSOR 3 +static int wdrtas_token_get_sensor_state; +#define WDRTAS_SURVEILLANCE_IND 9000 +static int wdrtas_token_set_indicator; +#define WDRTAS_SP_SPI 28 +static int wdrtas_token_get_sp; +static int wdrtas_token_event_scan; + +#define WDRTAS_DEFAULT_INTERVAL 300 + +#define WDRTAS_LOGBUFFER_LEN 128 +static char wdrtas_logbuffer[WDRTAS_LOGBUFFER_LEN]; + + +/*** watchdog access functions */ + +/** + * wdrtas_set_interval - sets the watchdog interval + * @interval: new interval + * + * returns 0 on success, <0 on failures + * + * wdrtas_set_interval sets the watchdog keepalive interval by calling the + * RTAS function set-indicator (surveillance). The unit of interval is + * seconds. + */ + +static int wdrtas_set_interval(int interval) +{ + long result; + static int print_msg = 10; + + /* rtas uses minutes */ + interval = (interval + 59) / 60; + + result = rtas_call(wdrtas_token_set_indicator, 3, 1, NULL, + WDRTAS_SURVEILLANCE_IND, 0, interval); + if (result < 0 && print_msg) { + pr_err("setting the watchdog to %i timeout failed: %li\n", + interval, result); + print_msg--; + } + + return result; +} + +#define WDRTAS_SP_SPI_LEN 4 + +/** + * wdrtas_get_interval - returns the current watchdog interval + * @fallback_value: value (in seconds) to use, if the RTAS call fails + * + * returns the interval + * + * wdrtas_get_interval returns the current watchdog keepalive interval + * as reported by the RTAS function ibm,get-system-parameter. The unit + * of the return value is seconds. + */ +static int wdrtas_get_interval(int fallback_value) +{ + long result; + char value[WDRTAS_SP_SPI_LEN]; + + spin_lock(&rtas_data_buf_lock); + memset(rtas_data_buf, 0, WDRTAS_SP_SPI_LEN); + result = rtas_call(wdrtas_token_get_sp, 3, 1, NULL, + WDRTAS_SP_SPI, __pa(rtas_data_buf), + WDRTAS_SP_SPI_LEN); + + memcpy(value, rtas_data_buf, WDRTAS_SP_SPI_LEN); + spin_unlock(&rtas_data_buf_lock); + + if (value[0] != 0 || value[1] != 2 || value[3] != 0 || result < 0) { + pr_warn("could not get sp_spi watchdog timeout (%li). Continuing\n", + result); + return fallback_value; + } + + /* rtas uses minutes */ + return ((int)value[2]) * 60; +} + +/** + * wdrtas_timer_start - starts watchdog + * + * wdrtas_timer_start starts the watchdog by calling the RTAS function + * set-interval (surveillance) + */ +static void wdrtas_timer_start(void) +{ + wdrtas_set_interval(wdrtas_interval); +} + +/** + * wdrtas_timer_stop - stops watchdog + * + * wdrtas_timer_stop stops the watchdog timer by calling the RTAS function + * set-interval (surveillance) + */ +static void wdrtas_timer_stop(void) +{ + wdrtas_set_interval(0); +} + +/** + * wdrtas_timer_keepalive - resets watchdog timer to keep system alive + * + * wdrtas_timer_keepalive restarts the watchdog timer by calling the + * RTAS function event-scan and repeats these calls as long as there are + * events available. All events will be dumped. + */ +static void wdrtas_timer_keepalive(void) +{ + long result; + + do { + result = rtas_call(wdrtas_token_event_scan, 4, 1, NULL, + RTAS_EVENT_SCAN_ALL_EVENTS, 0, + (void *)__pa(wdrtas_logbuffer), + WDRTAS_LOGBUFFER_LEN); + if (result < 0) + pr_err("event-scan failed: %li\n", result); + if (result == 0) + print_hex_dump(KERN_INFO, "dumping event, data: ", + DUMP_PREFIX_OFFSET, 16, 1, + wdrtas_logbuffer, WDRTAS_LOGBUFFER_LEN, false); + } while (result == 0); +} + +/** + * wdrtas_get_temperature - returns current temperature + * + * returns temperature or <0 on failures + * + * wdrtas_get_temperature returns the current temperature in Fahrenheit. It + * uses the RTAS call get-sensor-state, token 3 to do so + */ +static int wdrtas_get_temperature(void) +{ + int result; + int temperature = 0; + + result = rtas_get_sensor(WDRTAS_THERMAL_SENSOR, 0, &temperature); + + if (result < 0) + pr_warn("reading the thermal sensor failed: %i\n", result); + else + temperature = ((temperature * 9) / 5) + 32; /* fahrenheit */ + + return temperature; +} + +/** + * wdrtas_get_status - returns the status of the watchdog + * + * returns a bitmask of defines WDIOF_... as defined in + * include/linux/watchdog.h + */ +static int wdrtas_get_status(void) +{ + return 0; /* TODO */ +} + +/** + * wdrtas_get_boot_status - returns the reason for the last boot + * + * returns a bitmask of defines WDIOF_... as defined in + * include/linux/watchdog.h, indicating why the watchdog rebooted the system + */ +static int wdrtas_get_boot_status(void) +{ + return 0; /* TODO */ +} + +/*** watchdog API and operations stuff */ + +/* wdrtas_write - called when watchdog device is written to + * @file: file structure + * @buf: user buffer with data + * @len: amount to data written + * @ppos: position in file + * + * returns the number of successfully processed characters, which is always + * the number of bytes passed to this function + * + * wdrtas_write processes all the data given to it and looks for the magic + * character 'V'. This character allows the watchdog device to be closed + * properly. + */ +static ssize_t wdrtas_write(struct file *file, const char __user *buf, + size_t len, loff_t *ppos) +{ + int i; + char c; + + if (!len) + goto out; + + if (!wdrtas_nowayout) { + wdrtas_expect_close = 0; + /* look for 'V' */ + for (i = 0; i < len; i++) { + if (get_user(c, buf + i)) + return -EFAULT; + /* allow to close device */ + if (c == 'V') + wdrtas_expect_close = WDRTAS_MAGIC_CHAR; + } + } + + wdrtas_timer_keepalive(); + +out: + return len; +} + +/** + * wdrtas_ioctl - ioctl function for the watchdog device + * @file: file structure + * @cmd: command for ioctl + * @arg: argument pointer + * + * returns 0 on success, <0 on failure + * + * wdrtas_ioctl implements the watchdog API ioctls + */ + +static long wdrtas_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) +{ + int __user *argp = (void __user *)arg; + int i; + static const struct watchdog_info wdinfo = { + .options = WDRTAS_SUPPORTED_MASK, + .firmware_version = 0, + .identity = "wdrtas", + }; + + switch (cmd) { + case WDIOC_GETSUPPORT: + if (copy_to_user(argp, &wdinfo, sizeof(wdinfo))) + return -EFAULT; + return 0; + + case WDIOC_GETSTATUS: + i = wdrtas_get_status(); + return put_user(i, argp); + + case WDIOC_GETBOOTSTATUS: + i = wdrtas_get_boot_status(); + return put_user(i, argp); + + case WDIOC_GETTEMP: + if (wdrtas_token_get_sensor_state == RTAS_UNKNOWN_SERVICE) + return -EOPNOTSUPP; + + i = wdrtas_get_temperature(); + return put_user(i, argp); + + case WDIOC_SETOPTIONS: + if (get_user(i, argp)) + return -EFAULT; + if (i & WDIOS_DISABLECARD) + wdrtas_timer_stop(); + if (i & WDIOS_ENABLECARD) { + wdrtas_timer_keepalive(); + wdrtas_timer_start(); + } + /* not implemented. Done by H8 + if (i & WDIOS_TEMPPANIC) { + } */ + return 0; + + case WDIOC_KEEPALIVE: + wdrtas_timer_keepalive(); + return 0; + + case WDIOC_SETTIMEOUT: + if (get_user(i, argp)) + return -EFAULT; + + if (wdrtas_set_interval(i)) + return -EINVAL; + + wdrtas_timer_keepalive(); + + if (wdrtas_token_get_sp == RTAS_UNKNOWN_SERVICE) + wdrtas_interval = i; + else + wdrtas_interval = wdrtas_get_interval(i); + /* fallthrough */ + + case WDIOC_GETTIMEOUT: + return put_user(wdrtas_interval, argp); + + default: + return -ENOTTY; + } +} + +/** + * wdrtas_open - open function of watchdog device + * @inode: inode structure + * @file: file structure + * + * returns 0 on success, -EBUSY if the file has been opened already, <0 on + * other failures + * + * function called when watchdog device is opened + */ +static int wdrtas_open(struct inode *inode, struct file *file) +{ + /* only open once */ + if (atomic_inc_return(&wdrtas_miscdev_open) > 1) { + atomic_dec(&wdrtas_miscdev_open); + return -EBUSY; + } + + wdrtas_timer_start(); + wdrtas_timer_keepalive(); + + return nonseekable_open(inode, file); +} + +/** + * wdrtas_close - close function of watchdog device + * @inode: inode structure + * @file: file structure + * + * returns 0 on success + * + * close function. Always succeeds + */ +static int wdrtas_close(struct inode *inode, struct file *file) +{ + /* only stop watchdog, if this was announced using 'V' before */ + if (wdrtas_expect_close == WDRTAS_MAGIC_CHAR) + wdrtas_timer_stop(); + else { + pr_warn("got unexpected close. Watchdog not stopped.\n"); + wdrtas_timer_keepalive(); + } + + wdrtas_expect_close = 0; + atomic_dec(&wdrtas_miscdev_open); + return 0; +} + +/** + * wdrtas_temp_read - gives back the temperature in fahrenheit + * @file: file structure + * @buf: user buffer + * @count: number of bytes to be read + * @ppos: position in file + * + * returns always 1 or -EFAULT in case of user space copy failures, <0 on + * other failures + * + * wdrtas_temp_read gives the temperature to the users by copying this + * value as one byte into the user space buffer. The unit is Fahrenheit... + */ +static ssize_t wdrtas_temp_read(struct file *file, char __user *buf, + size_t count, loff_t *ppos) +{ + int temperature = 0; + + temperature = wdrtas_get_temperature(); + if (temperature < 0) + return temperature; + + if (copy_to_user(buf, &temperature, 1)) + return -EFAULT; + + return 1; +} + +/** + * wdrtas_temp_open - open function of temperature device + * @inode: inode structure + * @file: file structure + * + * returns 0 on success, <0 on failure + * + * function called when temperature device is opened + */ +static int wdrtas_temp_open(struct inode *inode, struct file *file) +{ + return nonseekable_open(inode, file); +} + +/** + * wdrtas_temp_close - close function of temperature device + * @inode: inode structure + * @file: file structure + * + * returns 0 on success + * + * close function. Always succeeds + */ +static int wdrtas_temp_close(struct inode *inode, struct file *file) +{ + return 0; +} + +/** + * wdrtas_reboot - reboot notifier function + * @nb: notifier block structure + * @code: reboot code + * @ptr: unused + * + * returns NOTIFY_DONE + * + * wdrtas_reboot stops the watchdog in case of a reboot + */ +static int wdrtas_reboot(struct notifier_block *this, + unsigned long code, void *ptr) +{ + if (code == SYS_DOWN || code == SYS_HALT) + wdrtas_timer_stop(); + + return NOTIFY_DONE; +} + +/*** initialization stuff */ + +static const struct file_operations wdrtas_fops = { + .owner = THIS_MODULE, + .llseek = no_llseek, + .write = wdrtas_write, + .unlocked_ioctl = wdrtas_ioctl, + .open = wdrtas_open, + .release = wdrtas_close, +}; + +static struct miscdevice wdrtas_miscdev = { + .minor = WATCHDOG_MINOR, + .name = "watchdog", + .fops = &wdrtas_fops, +}; + +static const struct file_operations wdrtas_temp_fops = { + .owner = THIS_MODULE, + .llseek = no_llseek, + .read = wdrtas_temp_read, + .open = wdrtas_temp_open, + .release = wdrtas_temp_close, +}; + +static struct miscdevice wdrtas_tempdev = { + .minor = TEMP_MINOR, + .name = "temperature", + .fops = &wdrtas_temp_fops, +}; + +static struct notifier_block wdrtas_notifier = { + .notifier_call = wdrtas_reboot, +}; + +/** + * wdrtas_get_tokens - reads in RTAS tokens + * + * returns 0 on success, <0 on failure + * + * wdrtas_get_tokens reads in the tokens for the RTAS calls used in + * this watchdog driver. It tolerates, if "get-sensor-state" and + * "ibm,get-system-parameter" are not available. + */ +static int wdrtas_get_tokens(void) +{ + wdrtas_token_get_sensor_state = rtas_token("get-sensor-state"); + if (wdrtas_token_get_sensor_state == RTAS_UNKNOWN_SERVICE) { + pr_warn("couldn't get token for get-sensor-state. Trying to continue without temperature support.\n"); + } + + wdrtas_token_get_sp = rtas_token("ibm,get-system-parameter"); + if (wdrtas_token_get_sp == RTAS_UNKNOWN_SERVICE) { + pr_warn("couldn't get token for ibm,get-system-parameter. Trying to continue with a default timeout value of %i seconds.\n", + WDRTAS_DEFAULT_INTERVAL); + } + + wdrtas_token_set_indicator = rtas_token("set-indicator"); + if (wdrtas_token_set_indicator == RTAS_UNKNOWN_SERVICE) { + pr_err("couldn't get token for set-indicator. Terminating watchdog code.\n"); + return -EIO; + } + + wdrtas_token_event_scan = rtas_token("event-scan"); + if (wdrtas_token_event_scan == RTAS_UNKNOWN_SERVICE) { + pr_err("couldn't get token for event-scan. Terminating watchdog code.\n"); + return -EIO; + } + + return 0; +} + +/** + * wdrtas_unregister_devs - unregisters the misc dev handlers + * + * wdrtas_register_devs unregisters the watchdog and temperature watchdog + * misc devs + */ +static void wdrtas_unregister_devs(void) +{ + misc_deregister(&wdrtas_miscdev); + if (wdrtas_token_get_sensor_state != RTAS_UNKNOWN_SERVICE) + misc_deregister(&wdrtas_tempdev); +} + +/** + * wdrtas_register_devs - registers the misc dev handlers + * + * returns 0 on success, <0 on failure + * + * wdrtas_register_devs registers the watchdog and temperature watchdog + * misc devs + */ +static int wdrtas_register_devs(void) +{ + int result; + + result = misc_register(&wdrtas_miscdev); + if (result) { + pr_err("couldn't register watchdog misc device. Terminating watchdog code.\n"); + return result; + } + + if (wdrtas_token_get_sensor_state != RTAS_UNKNOWN_SERVICE) { + result = misc_register(&wdrtas_tempdev); + if (result) { + pr_warn("couldn't register watchdog temperature misc device. Continuing without temperature support.\n"); + wdrtas_token_get_sensor_state = RTAS_UNKNOWN_SERVICE; + } + } + + return 0; +} + +/** + * wdrtas_init - init function of the watchdog driver + * + * returns 0 on success, <0 on failure + * + * registers the file handlers and the reboot notifier + */ +static int __init wdrtas_init(void) +{ + if (wdrtas_get_tokens()) + return -ENODEV; + + if (wdrtas_register_devs()) + return -ENODEV; + + if (register_reboot_notifier(&wdrtas_notifier)) { + pr_err("could not register reboot notifier. Terminating watchdog code.\n"); + wdrtas_unregister_devs(); + return -ENODEV; + } + + if (wdrtas_token_get_sp == RTAS_UNKNOWN_SERVICE) + wdrtas_interval = WDRTAS_DEFAULT_INTERVAL; + else + wdrtas_interval = wdrtas_get_interval(WDRTAS_DEFAULT_INTERVAL); + + return 0; +} + +/** + * wdrtas_exit - exit function of the watchdog driver + * + * unregisters the file handlers and the reboot notifier + */ +static void __exit wdrtas_exit(void) +{ + if (!wdrtas_nowayout) + wdrtas_timer_stop(); + + wdrtas_unregister_devs(); + + unregister_reboot_notifier(&wdrtas_notifier); +} + +module_init(wdrtas_init); +module_exit(wdrtas_exit); diff --git a/drivers/watchdog/wdt.c b/drivers/watchdog/wdt.c new file mode 100644 index 000000000..e481fbbc4 --- /dev/null +++ b/drivers/watchdog/wdt.c @@ -0,0 +1,667 @@ +/* + * Industrial Computer Source WDT501 driver + * + * (c) Copyright 1996-1997 Alan Cox <alan@lxorguk.ukuu.org.uk>, + * All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * Neither Alan Cox nor CymruNet Ltd. admit liability nor provide + * warranty for any of this software. This material is provided + * "AS-IS" and at no charge. + * + * (c) Copyright 1995 Alan Cox <alan@lxorguk.ukuu.org.uk> + * + * Release 0.10. + * + * Fixes + * Dave Gregorich : Modularisation and minor bugs + * Alan Cox : Added the watchdog ioctl() stuff + * Alan Cox : Fixed the reboot problem (as noted by + * Matt Crocker). + * Alan Cox : Added wdt= boot option + * Alan Cox : Cleaned up copy/user stuff + * Tim Hockin : Added insmod parameters, comment + * cleanup, parameterized timeout + * Tigran Aivazian : Restructured wdt_init() to handle + * failures + * Joel Becker : Added WDIOC_GET/SETTIMEOUT + * Matt Domsch : Added nowayout module option + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/interrupt.h> +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/types.h> +#include <linux/miscdevice.h> +#include <linux/watchdog.h> +#include <linux/fs.h> +#include <linux/ioport.h> +#include <linux/notifier.h> +#include <linux/reboot.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/uaccess.h> + +#include "wd501p.h" + +static unsigned long wdt_is_open; +static char expect_close; + +/* + * Module parameters + */ + +#define WD_TIMO 60 /* Default heartbeat = 60 seconds */ + +static int heartbeat = WD_TIMO; +static int wd_heartbeat; +module_param(heartbeat, int, 0); +MODULE_PARM_DESC(heartbeat, + "Watchdog heartbeat in seconds. (0 < heartbeat < 65536, default=" + __MODULE_STRING(WD_TIMO) ")"); + +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); +MODULE_PARM_DESC(nowayout, + "Watchdog cannot be stopped once started (default=" + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); + +/* You must set these - there is no sane way to probe for this board. */ +static int io = 0x240; +static int irq = 11; + +static DEFINE_SPINLOCK(wdt_lock); + +module_param_hw(io, int, ioport, 0); +MODULE_PARM_DESC(io, "WDT io port (default=0x240)"); +module_param_hw(irq, int, irq, 0); +MODULE_PARM_DESC(irq, "WDT irq (default=11)"); + +/* Support for the Fan Tachometer on the WDT501-P */ +static int tachometer; +module_param(tachometer, int, 0); +MODULE_PARM_DESC(tachometer, + "WDT501-P Fan Tachometer support (0=disable, default=0)"); + +static int type = 500; +module_param(type, int, 0); +MODULE_PARM_DESC(type, + "WDT501-P Card type (500 or 501, default=500)"); + +/* + * Programming support + */ + +static void wdt_ctr_mode(int ctr, int mode) +{ + ctr <<= 6; + ctr |= 0x30; + ctr |= (mode << 1); + outb_p(ctr, WDT_CR); +} + +static void wdt_ctr_load(int ctr, int val) +{ + outb_p(val&0xFF, WDT_COUNT0+ctr); + outb_p(val>>8, WDT_COUNT0+ctr); +} + +/** + * wdt_start: + * + * Start the watchdog driver. + */ + +static int wdt_start(void) +{ + unsigned long flags; + spin_lock_irqsave(&wdt_lock, flags); + inb_p(WDT_DC); /* Disable watchdog */ + wdt_ctr_mode(0, 3); /* Program CTR0 for Mode 3: + Square Wave Generator */ + wdt_ctr_mode(1, 2); /* Program CTR1 for Mode 2: + Rate Generator */ + wdt_ctr_mode(2, 0); /* Program CTR2 for Mode 0: + Pulse on Terminal Count */ + wdt_ctr_load(0, 8948); /* Count at 100Hz */ + wdt_ctr_load(1, wd_heartbeat); /* Heartbeat */ + wdt_ctr_load(2, 65535); /* Length of reset pulse */ + outb_p(0, WDT_DC); /* Enable watchdog */ + spin_unlock_irqrestore(&wdt_lock, flags); + return 0; +} + +/** + * wdt_stop: + * + * Stop the watchdog driver. + */ + +static int wdt_stop(void) +{ + unsigned long flags; + spin_lock_irqsave(&wdt_lock, flags); + /* Turn the card off */ + inb_p(WDT_DC); /* Disable watchdog */ + wdt_ctr_load(2, 0); /* 0 length reset pulses now */ + spin_unlock_irqrestore(&wdt_lock, flags); + return 0; +} + +/** + * wdt_ping: + * + * Reload counter one with the watchdog heartbeat. We don't bother + * reloading the cascade counter. + */ + +static void wdt_ping(void) +{ + unsigned long flags; + spin_lock_irqsave(&wdt_lock, flags); + /* Write a watchdog value */ + inb_p(WDT_DC); /* Disable watchdog */ + wdt_ctr_mode(1, 2); /* Re-Program CTR1 for Mode 2: + Rate Generator */ + wdt_ctr_load(1, wd_heartbeat); /* Heartbeat */ + outb_p(0, WDT_DC); /* Enable watchdog */ + spin_unlock_irqrestore(&wdt_lock, flags); +} + +/** + * wdt_set_heartbeat: + * @t: the new heartbeat value that needs to be set. + * + * Set a new heartbeat value for the watchdog device. If the heartbeat + * value is incorrect we keep the old value and return -EINVAL. If + * successful we return 0. + */ + +static int wdt_set_heartbeat(int t) +{ + if (t < 1 || t > 65535) + return -EINVAL; + + heartbeat = t; + wd_heartbeat = t * 100; + return 0; +} + +/** + * wdt_get_status: + * + * Extract the status information from a WDT watchdog device. There are + * several board variants so we have to know which bits are valid. Some + * bits default to one and some to zero in order to be maximally painful. + * + * we then map the bits onto the status ioctl flags. + */ + +static int wdt_get_status(void) +{ + unsigned char new_status; + int status = 0; + unsigned long flags; + + spin_lock_irqsave(&wdt_lock, flags); + new_status = inb_p(WDT_SR); + spin_unlock_irqrestore(&wdt_lock, flags); + + if (new_status & WDC_SR_ISOI0) + status |= WDIOF_EXTERN1; + if (new_status & WDC_SR_ISII1) + status |= WDIOF_EXTERN2; + if (type == 501) { + if (!(new_status & WDC_SR_TGOOD)) + status |= WDIOF_OVERHEAT; + if (!(new_status & WDC_SR_PSUOVER)) + status |= WDIOF_POWEROVER; + if (!(new_status & WDC_SR_PSUUNDR)) + status |= WDIOF_POWERUNDER; + if (tachometer) { + if (!(new_status & WDC_SR_FANGOOD)) + status |= WDIOF_FANFAULT; + } + } + return status; +} + +/** + * wdt_get_temperature: + * + * Reports the temperature in degrees Fahrenheit. The API is in + * farenheit. It was designed by an imperial measurement luddite. + */ + +static int wdt_get_temperature(void) +{ + unsigned short c; + unsigned long flags; + + spin_lock_irqsave(&wdt_lock, flags); + c = inb_p(WDT_RT); + spin_unlock_irqrestore(&wdt_lock, flags); + return (c * 11 / 15) + 7; +} + +static void wdt_decode_501(int status) +{ + if (!(status & WDC_SR_TGOOD)) + pr_crit("Overheat alarm (%d)\n", inb_p(WDT_RT)); + if (!(status & WDC_SR_PSUOVER)) + pr_crit("PSU over voltage\n"); + if (!(status & WDC_SR_PSUUNDR)) + pr_crit("PSU under voltage\n"); +} + +/** + * wdt_interrupt: + * @irq: Interrupt number + * @dev_id: Unused as we don't allow multiple devices. + * + * Handle an interrupt from the board. These are raised when the status + * map changes in what the board considers an interesting way. That means + * a failure condition occurring. + */ + +static irqreturn_t wdt_interrupt(int irq, void *dev_id) +{ + /* + * Read the status register see what is up and + * then printk it. + */ + unsigned char status; + + spin_lock(&wdt_lock); + status = inb_p(WDT_SR); + + pr_crit("WDT status %d\n", status); + + if (type == 501) { + wdt_decode_501(status); + if (tachometer) { + if (!(status & WDC_SR_FANGOOD)) + pr_crit("Possible fan fault\n"); + } + } + if (!(status & WDC_SR_WCCR)) { +#ifdef SOFTWARE_REBOOT +#ifdef ONLY_TESTING + pr_crit("Would Reboot\n"); +#else + pr_crit("Initiating system reboot\n"); + emergency_restart(); +#endif +#else + pr_crit("Reset in 5ms\n"); +#endif + } + spin_unlock(&wdt_lock); + return IRQ_HANDLED; +} + + +/** + * wdt_write: + * @file: file handle to the watchdog + * @buf: buffer to write (unused as data does not matter here + * @count: count of bytes + * @ppos: pointer to the position to write. No seeks allowed + * + * A write to a watchdog device is defined as a keepalive signal. Any + * write of data will do, as we we don't define content meaning. + */ + +static ssize_t wdt_write(struct file *file, const char __user *buf, + size_t count, loff_t *ppos) +{ + if (count) { + if (!nowayout) { + size_t i; + + /* In case it was set long ago */ + expect_close = 0; + + for (i = 0; i != count; i++) { + char c; + if (get_user(c, buf + i)) + return -EFAULT; + if (c == 'V') + expect_close = 42; + } + } + wdt_ping(); + } + return count; +} + +/** + * wdt_ioctl: + * @file: file handle to the device + * @cmd: watchdog command + * @arg: argument pointer + * + * The watchdog API defines a common set of functions for all watchdogs + * according to their available features. We only actually usefully support + * querying capabilities and current status. + */ + +static long wdt_ioctl(struct file *file, unsigned int cmd, unsigned long arg) +{ + void __user *argp = (void __user *)arg; + int __user *p = argp; + int new_heartbeat; + int status; + + struct watchdog_info ident = { + .options = WDIOF_SETTIMEOUT| + WDIOF_MAGICCLOSE| + WDIOF_KEEPALIVEPING, + .firmware_version = 1, + .identity = "WDT500/501", + }; + + /* Add options according to the card we have */ + ident.options |= (WDIOF_EXTERN1|WDIOF_EXTERN2); + if (type == 501) { + ident.options |= (WDIOF_OVERHEAT|WDIOF_POWERUNDER| + WDIOF_POWEROVER); + if (tachometer) + ident.options |= WDIOF_FANFAULT; + } + + switch (cmd) { + case WDIOC_GETSUPPORT: + return copy_to_user(argp, &ident, sizeof(ident)) ? -EFAULT : 0; + case WDIOC_GETSTATUS: + status = wdt_get_status(); + return put_user(status, p); + case WDIOC_GETBOOTSTATUS: + return put_user(0, p); + case WDIOC_KEEPALIVE: + wdt_ping(); + return 0; + case WDIOC_SETTIMEOUT: + if (get_user(new_heartbeat, p)) + return -EFAULT; + if (wdt_set_heartbeat(new_heartbeat)) + return -EINVAL; + wdt_ping(); + /* Fall */ + case WDIOC_GETTIMEOUT: + return put_user(heartbeat, p); + default: + return -ENOTTY; + } +} + +/** + * wdt_open: + * @inode: inode of device + * @file: file handle to device + * + * The watchdog device has been opened. The watchdog device is single + * open and on opening we load the counters. Counter zero is a 100Hz + * cascade, into counter 1 which downcounts to reboot. When the counter + * triggers counter 2 downcounts the length of the reset pulse which + * set set to be as long as possible. + */ + +static int wdt_open(struct inode *inode, struct file *file) +{ + if (test_and_set_bit(0, &wdt_is_open)) + return -EBUSY; + /* + * Activate + */ + wdt_start(); + return nonseekable_open(inode, file); +} + +/** + * wdt_release: + * @inode: inode to board + * @file: file handle to board + * + * The watchdog has a configurable API. There is a religious dispute + * between people who want their watchdog to be able to shut down and + * those who want to be sure if the watchdog manager dies the machine + * reboots. In the former case we disable the counters, in the latter + * case you have to open it again very soon. + */ + +static int wdt_release(struct inode *inode, struct file *file) +{ + if (expect_close == 42) { + wdt_stop(); + clear_bit(0, &wdt_is_open); + } else { + pr_crit("WDT device closed unexpectedly. WDT will not stop!\n"); + wdt_ping(); + } + expect_close = 0; + return 0; +} + +/** + * wdt_temp_read: + * @file: file handle to the watchdog board + * @buf: buffer to write 1 byte into + * @count: length of buffer + * @ptr: offset (no seek allowed) + * + * Temp_read reports the temperature in degrees Fahrenheit. The API is in + * farenheit. It was designed by an imperial measurement luddite. + */ + +static ssize_t wdt_temp_read(struct file *file, char __user *buf, + size_t count, loff_t *ptr) +{ + int temperature = wdt_get_temperature(); + + if (copy_to_user(buf, &temperature, 1)) + return -EFAULT; + + return 1; +} + +/** + * wdt_temp_open: + * @inode: inode of device + * @file: file handle to device + * + * The temperature device has been opened. + */ + +static int wdt_temp_open(struct inode *inode, struct file *file) +{ + return nonseekable_open(inode, file); +} + +/** + * wdt_temp_release: + * @inode: inode to board + * @file: file handle to board + * + * The temperature device has been closed. + */ + +static int wdt_temp_release(struct inode *inode, struct file *file) +{ + return 0; +} + +/** + * notify_sys: + * @this: our notifier block + * @code: the event being reported + * @unused: unused + * + * Our notifier is called on system shutdowns. We want to turn the card + * off at reboot otherwise the machine will reboot again during memory + * test or worse yet during the following fsck. This would suck, in fact + * trust me - if it happens it does suck. + */ + +static int wdt_notify_sys(struct notifier_block *this, unsigned long code, + void *unused) +{ + if (code == SYS_DOWN || code == SYS_HALT) + wdt_stop(); + return NOTIFY_DONE; +} + +/* + * Kernel Interfaces + */ + + +static const struct file_operations wdt_fops = { + .owner = THIS_MODULE, + .llseek = no_llseek, + .write = wdt_write, + .unlocked_ioctl = wdt_ioctl, + .open = wdt_open, + .release = wdt_release, +}; + +static struct miscdevice wdt_miscdev = { + .minor = WATCHDOG_MINOR, + .name = "watchdog", + .fops = &wdt_fops, +}; + +static const struct file_operations wdt_temp_fops = { + .owner = THIS_MODULE, + .llseek = no_llseek, + .read = wdt_temp_read, + .open = wdt_temp_open, + .release = wdt_temp_release, +}; + +static struct miscdevice temp_miscdev = { + .minor = TEMP_MINOR, + .name = "temperature", + .fops = &wdt_temp_fops, +}; + +/* + * The WDT card needs to learn about soft shutdowns in order to + * turn the timebomb registers off. + */ + +static struct notifier_block wdt_notifier = { + .notifier_call = wdt_notify_sys, +}; + +/** + * cleanup_module: + * + * Unload the watchdog. You cannot do this with any file handles open. + * If your watchdog is set to continue ticking on close and you unload + * it, well it keeps ticking. We won't get the interrupt but the board + * will not touch PC memory so all is fine. You just have to load a new + * module in 60 seconds or reboot. + */ + +static void __exit wdt_exit(void) +{ + misc_deregister(&wdt_miscdev); + if (type == 501) + misc_deregister(&temp_miscdev); + unregister_reboot_notifier(&wdt_notifier); + free_irq(irq, NULL); + release_region(io, 8); +} + +/** + * wdt_init: + * + * Set up the WDT watchdog board. All we have to do is grab the + * resources we require and bitch if anyone beat us to them. + * The open() function will actually kick the board off. + */ + +static int __init wdt_init(void) +{ + int ret; + + if (type != 500 && type != 501) { + pr_err("unknown card type '%d'\n", type); + return -ENODEV; + } + + /* Check that the heartbeat value is within it's range; + if not reset to the default */ + if (wdt_set_heartbeat(heartbeat)) { + wdt_set_heartbeat(WD_TIMO); + pr_info("heartbeat value must be 0 < heartbeat < 65536, using %d\n", + WD_TIMO); + } + + if (!request_region(io, 8, "wdt501p")) { + pr_err("I/O address 0x%04x already in use\n", io); + ret = -EBUSY; + goto out; + } + + ret = request_irq(irq, wdt_interrupt, 0, "wdt501p", NULL); + if (ret) { + pr_err("IRQ %d is not free\n", irq); + goto outreg; + } + + ret = register_reboot_notifier(&wdt_notifier); + if (ret) { + pr_err("cannot register reboot notifier (err=%d)\n", ret); + goto outirq; + } + + if (type == 501) { + ret = misc_register(&temp_miscdev); + if (ret) { + pr_err("cannot register miscdev on minor=%d (err=%d)\n", + TEMP_MINOR, ret); + goto outrbt; + } + } + + ret = misc_register(&wdt_miscdev); + if (ret) { + pr_err("cannot register miscdev on minor=%d (err=%d)\n", + WATCHDOG_MINOR, ret); + goto outmisc; + } + + pr_info("WDT500/501-P driver 0.10 at 0x%04x (Interrupt %d). heartbeat=%d sec (nowayout=%d)\n", + io, irq, heartbeat, nowayout); + if (type == 501) + pr_info("Fan Tachometer is %s\n", + tachometer ? "Enabled" : "Disabled"); + return 0; + +outmisc: + if (type == 501) + misc_deregister(&temp_miscdev); +outrbt: + unregister_reboot_notifier(&wdt_notifier); +outirq: + free_irq(irq, NULL); +outreg: + release_region(io, 8); +out: + return ret; +} + +module_init(wdt_init); +module_exit(wdt_exit); + +MODULE_AUTHOR("Alan Cox"); +MODULE_DESCRIPTION("Driver for ISA ICS watchdog cards (WDT500/501)"); +MODULE_LICENSE("GPL"); diff --git a/drivers/watchdog/wdt285.c b/drivers/watchdog/wdt285.c new file mode 100644 index 000000000..ebbb183be --- /dev/null +++ b/drivers/watchdog/wdt285.c @@ -0,0 +1,231 @@ +/* + * Intel 21285 watchdog driver + * Copyright (c) Phil Blundell <pb@nexus.co.uk>, 1998 + * + * based on + * + * SoftDog 0.05: A Software Watchdog Device + * + * (c) Copyright 1996 Alan Cox <alan@lxorguk.ukuu.org.uk>, + * All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/types.h> +#include <linux/kernel.h> +#include <linux/fs.h> +#include <linux/mm.h> +#include <linux/miscdevice.h> +#include <linux/watchdog.h> +#include <linux/reboot.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/uaccess.h> +#include <linux/irq.h> +#include <mach/hardware.h> + +#include <asm/mach-types.h> +#include <asm/system_info.h> +#include <asm/hardware/dec21285.h> + +/* + * Define this to stop the watchdog actually rebooting the machine. + */ +#undef ONLY_TESTING + +static unsigned int soft_margin = 60; /* in seconds */ +static unsigned int reload; +static unsigned long timer_alive; + +#ifdef ONLY_TESTING +/* + * If the timer expires.. + */ +static void watchdog_fire(int irq, void *dev_id) +{ + pr_crit("Would Reboot\n"); + *CSR_TIMER4_CNTL = 0; + *CSR_TIMER4_CLR = 0; +} +#endif + +/* + * Refresh the timer. + */ +static void watchdog_ping(void) +{ + *CSR_TIMER4_LOAD = reload; +} + +/* + * Allow only one person to hold it open + */ +static int watchdog_open(struct inode *inode, struct file *file) +{ + int ret; + + if (*CSR_SA110_CNTL & (1 << 13)) + return -EBUSY; + + if (test_and_set_bit(1, &timer_alive)) + return -EBUSY; + + reload = soft_margin * (mem_fclk_21285 / 256); + + *CSR_TIMER4_CLR = 0; + watchdog_ping(); + *CSR_TIMER4_CNTL = TIMER_CNTL_ENABLE | TIMER_CNTL_AUTORELOAD + | TIMER_CNTL_DIV256; + +#ifdef ONLY_TESTING + ret = request_irq(IRQ_TIMER4, watchdog_fire, 0, "watchdog", NULL); + if (ret) { + *CSR_TIMER4_CNTL = 0; + clear_bit(1, &timer_alive); + } +#else + /* + * Setting this bit is irreversible; once enabled, there is + * no way to disable the watchdog. + */ + *CSR_SA110_CNTL |= 1 << 13; + + ret = 0; +#endif + nonseekable_open(inode, file); + return ret; +} + +/* + * Shut off the timer. + * Note: if we really have enabled the watchdog, there + * is no way to turn off. + */ +static int watchdog_release(struct inode *inode, struct file *file) +{ +#ifdef ONLY_TESTING + free_irq(IRQ_TIMER4, NULL); + clear_bit(1, &timer_alive); +#endif + return 0; +} + +static ssize_t watchdog_write(struct file *file, const char __user *data, + size_t len, loff_t *ppos) +{ + /* + * Refresh the timer. + */ + if (len) + watchdog_ping(); + + return len; +} + +static const struct watchdog_info ident = { + .options = WDIOF_SETTIMEOUT, + .identity = "Footbridge Watchdog", +}; + +static long watchdog_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) +{ + int __user *int_arg = (int __user *)arg; + int new_margin, ret = -ENOTTY; + + switch (cmd) { + case WDIOC_GETSUPPORT: + ret = 0; + if (copy_to_user((void __user *)arg, &ident, sizeof(ident))) + ret = -EFAULT; + break; + + case WDIOC_GETSTATUS: + case WDIOC_GETBOOTSTATUS: + ret = put_user(0, int_arg); + break; + + case WDIOC_KEEPALIVE: + watchdog_ping(); + ret = 0; + break; + + case WDIOC_SETTIMEOUT: + ret = get_user(new_margin, int_arg); + if (ret) + break; + + /* Arbitrary, can't find the card's limits */ + if (new_margin < 0 || new_margin > 60) { + ret = -EINVAL; + break; + } + + soft_margin = new_margin; + reload = soft_margin * (mem_fclk_21285 / 256); + watchdog_ping(); + /* Fall */ + case WDIOC_GETTIMEOUT: + ret = put_user(soft_margin, int_arg); + break; + } + return ret; +} + +static const struct file_operations watchdog_fops = { + .owner = THIS_MODULE, + .llseek = no_llseek, + .write = watchdog_write, + .unlocked_ioctl = watchdog_ioctl, + .open = watchdog_open, + .release = watchdog_release, +}; + +static struct miscdevice watchdog_miscdev = { + .minor = WATCHDOG_MINOR, + .name = "watchdog", + .fops = &watchdog_fops, +}; + +static int __init footbridge_watchdog_init(void) +{ + int retval; + + if (machine_is_netwinder()) + return -ENODEV; + + retval = misc_register(&watchdog_miscdev); + if (retval < 0) + return retval; + + pr_info("Footbridge Watchdog Timer: 0.01, timer margin: %d sec\n", + soft_margin); + + if (machine_is_cats()) + pr_warn("Warning: Watchdog reset may not work on this machine\n"); + return 0; +} + +static void __exit footbridge_watchdog_exit(void) +{ + misc_deregister(&watchdog_miscdev); +} + +MODULE_AUTHOR("Phil Blundell <pb@nexus.co.uk>"); +MODULE_DESCRIPTION("Footbridge watchdog driver"); +MODULE_LICENSE("GPL"); + +module_param(soft_margin, int, 0); +MODULE_PARM_DESC(soft_margin, "Watchdog timeout in seconds"); + +module_init(footbridge_watchdog_init); +module_exit(footbridge_watchdog_exit); diff --git a/drivers/watchdog/wdt977.c b/drivers/watchdog/wdt977.c new file mode 100644 index 000000000..a8e6f87f6 --- /dev/null +++ b/drivers/watchdog/wdt977.c @@ -0,0 +1,509 @@ +/* + * Wdt977 0.04: A Watchdog Device for Netwinder W83977AF chip + * + * (c) Copyright 1998 Rebel.com (Woody Suwalski <woody@netwinder.org>) + * + * ----------------------- + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * ----------------------- + * 14-Dec-2001 Matt Domsch <Matt_Domsch@dell.com> + * Added nowayout module option to override CONFIG_WATCHDOG_NOWAYOUT + * 19-Dec-2001 Woody Suwalski: Netwinder fixes, ioctl interface + * 06-Jan-2002 Woody Suwalski: For compatibility, convert all timeouts + * from minutes to seconds. + * 07-Jul-2003 Daniele Bellucci: Audit return code of misc_register in + * nwwatchdog_init. + * 25-Oct-2005 Woody Suwalski: Convert addresses to #defs, add spinlocks + * remove limitiation to be used on + * Netwinders only + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/types.h> +#include <linux/kernel.h> +#include <linux/fs.h> +#include <linux/miscdevice.h> +#include <linux/init.h> +#include <linux/ioport.h> +#include <linux/watchdog.h> +#include <linux/notifier.h> +#include <linux/reboot.h> +#include <linux/io.h> +#include <linux/uaccess.h> + +#include <asm/mach-types.h> + +#define WATCHDOG_VERSION "0.04" +#define WATCHDOG_NAME "Wdt977" + +#define IO_INDEX_PORT 0x370 /* on some systems it can be 0x3F0 */ +#define IO_DATA_PORT (IO_INDEX_PORT + 1) + +#define UNLOCK_DATA 0x87 +#define LOCK_DATA 0xAA +#define DEVICE_REGISTER 0x07 + + +#define DEFAULT_TIMEOUT 60 /* default timeout in seconds */ + +static int timeout = DEFAULT_TIMEOUT; +static int timeoutM; /* timeout in minutes */ +static unsigned long timer_alive; +static int testmode; +static char expect_close; +static DEFINE_SPINLOCK(spinlock); + +module_param(timeout, int, 0); +MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds (60..15300, default=" + __MODULE_STRING(DEFAULT_TIMEOUT) ")"); +module_param(testmode, int, 0); +MODULE_PARM_DESC(testmode, "Watchdog testmode (1 = no reboot), default=0"); + +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); +MODULE_PARM_DESC(nowayout, + "Watchdog cannot be stopped once started (default=" + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); + +/* + * Start the watchdog + */ + +static int wdt977_start(void) +{ + unsigned long flags; + + spin_lock_irqsave(&spinlock, flags); + + /* unlock the SuperIO chip */ + outb_p(UNLOCK_DATA, IO_INDEX_PORT); + outb_p(UNLOCK_DATA, IO_INDEX_PORT); + + /* select device Aux2 (device=8) and set watchdog regs F2, F3 and F4 + * F2 has the timeout in minutes + * F3 could be set to the POWER LED blink (with GP17 set to PowerLed) + * at timeout, and to reset timer on kbd/mouse activity (not impl.) + * F4 is used to just clear the TIMEOUT'ed state (bit 0) + */ + outb_p(DEVICE_REGISTER, IO_INDEX_PORT); + outb_p(0x08, IO_DATA_PORT); + outb_p(0xF2, IO_INDEX_PORT); + outb_p(timeoutM, IO_DATA_PORT); + outb_p(0xF3, IO_INDEX_PORT); + outb_p(0x00, IO_DATA_PORT); /* another setting is 0E for + kbd/mouse/LED */ + outb_p(0xF4, IO_INDEX_PORT); + outb_p(0x00, IO_DATA_PORT); + + /* At last select device Aux1 (dev=7) and set GP16 as a + * watchdog output. In test mode watch the bit 1 on F4 to + * indicate "triggered" + */ + if (!testmode) { + outb_p(DEVICE_REGISTER, IO_INDEX_PORT); + outb_p(0x07, IO_DATA_PORT); + outb_p(0xE6, IO_INDEX_PORT); + outb_p(0x08, IO_DATA_PORT); + } + + /* lock the SuperIO chip */ + outb_p(LOCK_DATA, IO_INDEX_PORT); + + spin_unlock_irqrestore(&spinlock, flags); + pr_info("activated\n"); + + return 0; +} + +/* + * Stop the watchdog + */ + +static int wdt977_stop(void) +{ + unsigned long flags; + spin_lock_irqsave(&spinlock, flags); + + /* unlock the SuperIO chip */ + outb_p(UNLOCK_DATA, IO_INDEX_PORT); + outb_p(UNLOCK_DATA, IO_INDEX_PORT); + + /* select device Aux2 (device=8) and set watchdog regs F2,F3 and F4 + * F3 is reset to its default state + * F4 can clear the TIMEOUT'ed state (bit 0) - back to default + * We can not use GP17 as a PowerLed, as we use its usage as a RedLed + */ + outb_p(DEVICE_REGISTER, IO_INDEX_PORT); + outb_p(0x08, IO_DATA_PORT); + outb_p(0xF2, IO_INDEX_PORT); + outb_p(0xFF, IO_DATA_PORT); + outb_p(0xF3, IO_INDEX_PORT); + outb_p(0x00, IO_DATA_PORT); + outb_p(0xF4, IO_INDEX_PORT); + outb_p(0x00, IO_DATA_PORT); + outb_p(0xF2, IO_INDEX_PORT); + outb_p(0x00, IO_DATA_PORT); + + /* at last select device Aux1 (dev=7) and set + GP16 as a watchdog output */ + outb_p(DEVICE_REGISTER, IO_INDEX_PORT); + outb_p(0x07, IO_DATA_PORT); + outb_p(0xE6, IO_INDEX_PORT); + outb_p(0x08, IO_DATA_PORT); + + /* lock the SuperIO chip */ + outb_p(LOCK_DATA, IO_INDEX_PORT); + + spin_unlock_irqrestore(&spinlock, flags); + pr_info("shutdown\n"); + + return 0; +} + +/* + * Send a keepalive ping to the watchdog + * This is done by simply re-writing the timeout to reg. 0xF2 + */ + +static int wdt977_keepalive(void) +{ + unsigned long flags; + spin_lock_irqsave(&spinlock, flags); + + /* unlock the SuperIO chip */ + outb_p(UNLOCK_DATA, IO_INDEX_PORT); + outb_p(UNLOCK_DATA, IO_INDEX_PORT); + + /* select device Aux2 (device=8) and kicks watchdog reg F2 */ + /* F2 has the timeout in minutes */ + outb_p(DEVICE_REGISTER, IO_INDEX_PORT); + outb_p(0x08, IO_DATA_PORT); + outb_p(0xF2, IO_INDEX_PORT); + outb_p(timeoutM, IO_DATA_PORT); + + /* lock the SuperIO chip */ + outb_p(LOCK_DATA, IO_INDEX_PORT); + spin_unlock_irqrestore(&spinlock, flags); + + return 0; +} + +/* + * Set the watchdog timeout value + */ + +static int wdt977_set_timeout(int t) +{ + int tmrval; + + /* convert seconds to minutes, rounding up */ + tmrval = (t + 59) / 60; + + if (machine_is_netwinder()) { + /* we have a hw bug somewhere, so each 977 minute is actually + * only 30sec. This limits the max timeout to half of device + * max of 255 minutes... + */ + tmrval += tmrval; + } + + if (tmrval < 1 || tmrval > 255) + return -EINVAL; + + /* timeout is the timeout in seconds, timeoutM is + the timeout in minutes) */ + timeout = t; + timeoutM = tmrval; + return 0; +} + +/* + * Get the watchdog status + */ + +static int wdt977_get_status(int *status) +{ + int new_status; + unsigned long flags; + + spin_lock_irqsave(&spinlock, flags); + + /* unlock the SuperIO chip */ + outb_p(UNLOCK_DATA, IO_INDEX_PORT); + outb_p(UNLOCK_DATA, IO_INDEX_PORT); + + /* select device Aux2 (device=8) and read watchdog reg F4 */ + outb_p(DEVICE_REGISTER, IO_INDEX_PORT); + outb_p(0x08, IO_DATA_PORT); + outb_p(0xF4, IO_INDEX_PORT); + new_status = inb_p(IO_DATA_PORT); + + /* lock the SuperIO chip */ + outb_p(LOCK_DATA, IO_INDEX_PORT); + + spin_unlock_irqrestore(&spinlock, flags); + + *status = 0; + if (new_status & 1) + *status |= WDIOF_CARDRESET; + + return 0; +} + + +/* + * /dev/watchdog handling + */ + +static int wdt977_open(struct inode *inode, struct file *file) +{ + /* If the watchdog is alive we don't need to start it again */ + if (test_and_set_bit(0, &timer_alive)) + return -EBUSY; + + if (nowayout) + __module_get(THIS_MODULE); + + wdt977_start(); + return nonseekable_open(inode, file); +} + +static int wdt977_release(struct inode *inode, struct file *file) +{ + /* + * Shut off the timer. + * Lock it in if it's a module and we set nowayout + */ + if (expect_close == 42) { + wdt977_stop(); + clear_bit(0, &timer_alive); + } else { + wdt977_keepalive(); + pr_crit("Unexpected close, not stopping watchdog!\n"); + } + expect_close = 0; + return 0; +} + + +/* + * wdt977_write: + * @file: file handle to the watchdog + * @buf: buffer to write (unused as data does not matter here + * @count: count of bytes + * @ppos: pointer to the position to write. No seeks allowed + * + * A write to a watchdog device is defined as a keepalive signal. Any + * write of data will do, as we we don't define content meaning. + */ + +static ssize_t wdt977_write(struct file *file, const char __user *buf, + size_t count, loff_t *ppos) +{ + if (count) { + if (!nowayout) { + size_t i; + + /* In case it was set long ago */ + expect_close = 0; + + for (i = 0; i != count; i++) { + char c; + if (get_user(c, buf + i)) + return -EFAULT; + if (c == 'V') + expect_close = 42; + } + } + + /* someone wrote to us, we should restart timer */ + wdt977_keepalive(); + } + return count; +} + +static const struct watchdog_info ident = { + .options = WDIOF_SETTIMEOUT | + WDIOF_MAGICCLOSE | + WDIOF_KEEPALIVEPING, + .firmware_version = 1, + .identity = WATCHDOG_NAME, +}; + +/* + * wdt977_ioctl: + * @inode: inode of the device + * @file: file handle to the device + * @cmd: watchdog command + * @arg: argument pointer + * + * The watchdog API defines a common set of functions for all watchdogs + * according to their available features. + */ + +static long wdt977_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) +{ + int status; + int new_options, retval = -EINVAL; + int new_timeout; + union { + struct watchdog_info __user *ident; + int __user *i; + } uarg; + + uarg.i = (int __user *)arg; + + switch (cmd) { + case WDIOC_GETSUPPORT: + return copy_to_user(uarg.ident, &ident, + sizeof(ident)) ? -EFAULT : 0; + + case WDIOC_GETSTATUS: + wdt977_get_status(&status); + return put_user(status, uarg.i); + + case WDIOC_GETBOOTSTATUS: + return put_user(0, uarg.i); + + case WDIOC_SETOPTIONS: + if (get_user(new_options, uarg.i)) + return -EFAULT; + + if (new_options & WDIOS_DISABLECARD) { + wdt977_stop(); + retval = 0; + } + + if (new_options & WDIOS_ENABLECARD) { + wdt977_start(); + retval = 0; + } + + return retval; + + case WDIOC_KEEPALIVE: + wdt977_keepalive(); + return 0; + + case WDIOC_SETTIMEOUT: + if (get_user(new_timeout, uarg.i)) + return -EFAULT; + + if (wdt977_set_timeout(new_timeout)) + return -EINVAL; + + wdt977_keepalive(); + /* Fall */ + + case WDIOC_GETTIMEOUT: + return put_user(timeout, uarg.i); + + default: + return -ENOTTY; + + } +} + +static int wdt977_notify_sys(struct notifier_block *this, unsigned long code, + void *unused) +{ + if (code == SYS_DOWN || code == SYS_HALT) + wdt977_stop(); + return NOTIFY_DONE; +} + +static const struct file_operations wdt977_fops = { + .owner = THIS_MODULE, + .llseek = no_llseek, + .write = wdt977_write, + .unlocked_ioctl = wdt977_ioctl, + .open = wdt977_open, + .release = wdt977_release, +}; + +static struct miscdevice wdt977_miscdev = { + .minor = WATCHDOG_MINOR, + .name = "watchdog", + .fops = &wdt977_fops, +}; + +static struct notifier_block wdt977_notifier = { + .notifier_call = wdt977_notify_sys, +}; + +static int __init wd977_init(void) +{ + int rc; + + pr_info("driver v%s\n", WATCHDOG_VERSION); + + /* Check that the timeout value is within its range; + if not reset to the default */ + if (wdt977_set_timeout(timeout)) { + wdt977_set_timeout(DEFAULT_TIMEOUT); + pr_info("timeout value must be 60 < timeout < 15300, using %d\n", + DEFAULT_TIMEOUT); + } + + /* on Netwinder the IOports are already reserved by + * arch/arm/mach-footbridge/netwinder-hw.c + */ + if (!machine_is_netwinder()) { + if (!request_region(IO_INDEX_PORT, 2, WATCHDOG_NAME)) { + pr_err("I/O address 0x%04x already in use\n", + IO_INDEX_PORT); + rc = -EIO; + goto err_out; + } + } + + rc = register_reboot_notifier(&wdt977_notifier); + if (rc) { + pr_err("cannot register reboot notifier (err=%d)\n", rc); + goto err_out_region; + } + + rc = misc_register(&wdt977_miscdev); + if (rc) { + pr_err("cannot register miscdev on minor=%d (err=%d)\n", + wdt977_miscdev.minor, rc); + goto err_out_reboot; + } + + pr_info("initialized. timeout=%d sec (nowayout=%d, testmode=%i)\n", + timeout, nowayout, testmode); + + return 0; + +err_out_reboot: + unregister_reboot_notifier(&wdt977_notifier); +err_out_region: + if (!machine_is_netwinder()) + release_region(IO_INDEX_PORT, 2); +err_out: + return rc; +} + +static void __exit wd977_exit(void) +{ + wdt977_stop(); + misc_deregister(&wdt977_miscdev); + unregister_reboot_notifier(&wdt977_notifier); + release_region(IO_INDEX_PORT, 2); +} + +module_init(wd977_init); +module_exit(wd977_exit); + +MODULE_AUTHOR("Woody Suwalski <woodys@xandros.com>"); +MODULE_DESCRIPTION("W83977AF Watchdog driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/watchdog/wdt_pci.c b/drivers/watchdog/wdt_pci.c new file mode 100644 index 000000000..10e2cda0e --- /dev/null +++ b/drivers/watchdog/wdt_pci.c @@ -0,0 +1,745 @@ +/* + * Industrial Computer Source PCI-WDT500/501 driver + * + * (c) Copyright 1996-1997 Alan Cox <alan@lxorguk.ukuu.org.uk>, + * All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * Neither Alan Cox nor CymruNet Ltd. admit liability nor provide + * warranty for any of this software. This material is provided + * "AS-IS" and at no charge. + * + * (c) Copyright 1995 Alan Cox <alan@lxorguk.ukuu.org.uk> + * + * Release 0.10. + * + * Fixes + * Dave Gregorich : Modularisation and minor bugs + * Alan Cox : Added the watchdog ioctl() stuff + * Alan Cox : Fixed the reboot problem (as noted by + * Matt Crocker). + * Alan Cox : Added wdt= boot option + * Alan Cox : Cleaned up copy/user stuff + * Tim Hockin : Added insmod parameters, comment cleanup + * Parameterized timeout + * JP Nollmann : Added support for PCI wdt501p + * Alan Cox : Split ISA and PCI cards into two drivers + * Jeff Garzik : PCI cleanups + * Tigran Aivazian : Restructured wdtpci_init_one() to handle + * failures + * Joel Becker : Added WDIOC_GET/SETTIMEOUT + * Zwane Mwaikambo : Magic char closing, locking changes, + * cleanups + * Matt Domsch : nowayout module option + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/interrupt.h> +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/types.h> +#include <linux/miscdevice.h> +#include <linux/watchdog.h> +#include <linux/ioport.h> +#include <linux/delay.h> +#include <linux/notifier.h> +#include <linux/reboot.h> +#include <linux/fs.h> +#include <linux/pci.h> +#include <linux/io.h> +#include <linux/uaccess.h> + + +#define WDT_IS_PCI +#include "wd501p.h" + +/* We can only use 1 card due to the /dev/watchdog restriction */ +static int dev_count; + +static unsigned long open_lock; +static DEFINE_SPINLOCK(wdtpci_lock); +static char expect_close; + +static resource_size_t io; +static int irq; + +/* Default timeout */ +#define WD_TIMO 60 /* Default heartbeat = 60 seconds */ + +static int heartbeat = WD_TIMO; +static int wd_heartbeat; +module_param(heartbeat, int, 0); +MODULE_PARM_DESC(heartbeat, + "Watchdog heartbeat in seconds. (0<heartbeat<65536, default=" + __MODULE_STRING(WD_TIMO) ")"); + +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); +MODULE_PARM_DESC(nowayout, + "Watchdog cannot be stopped once started (default=" + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); + +/* Support for the Fan Tachometer on the PCI-WDT501 */ +static int tachometer; +module_param(tachometer, int, 0); +MODULE_PARM_DESC(tachometer, + "PCI-WDT501 Fan Tachometer support (0=disable, default=0)"); + +static int type = 500; +module_param(type, int, 0); +MODULE_PARM_DESC(type, + "PCI-WDT501 Card type (500 or 501 , default=500)"); + +/* + * Programming support + */ + +static void wdtpci_ctr_mode(int ctr, int mode) +{ + ctr <<= 6; + ctr |= 0x30; + ctr |= (mode << 1); + outb(ctr, WDT_CR); + udelay(8); +} + +static void wdtpci_ctr_load(int ctr, int val) +{ + outb(val & 0xFF, WDT_COUNT0 + ctr); + udelay(8); + outb(val >> 8, WDT_COUNT0 + ctr); + udelay(8); +} + +/** + * wdtpci_start: + * + * Start the watchdog driver. + */ + +static int wdtpci_start(void) +{ + unsigned long flags; + + spin_lock_irqsave(&wdtpci_lock, flags); + + /* + * "pet" the watchdog, as Access says. + * This resets the clock outputs. + */ + inb(WDT_DC); /* Disable watchdog */ + udelay(8); + wdtpci_ctr_mode(2, 0); /* Program CTR2 for Mode 0: + Pulse on Terminal Count */ + outb(0, WDT_DC); /* Enable watchdog */ + udelay(8); + inb(WDT_DC); /* Disable watchdog */ + udelay(8); + outb(0, WDT_CLOCK); /* 2.0833MHz clock */ + udelay(8); + inb(WDT_BUZZER); /* disable */ + udelay(8); + inb(WDT_OPTONOTRST); /* disable */ + udelay(8); + inb(WDT_OPTORST); /* disable */ + udelay(8); + inb(WDT_PROGOUT); /* disable */ + udelay(8); + wdtpci_ctr_mode(0, 3); /* Program CTR0 for Mode 3: + Square Wave Generator */ + wdtpci_ctr_mode(1, 2); /* Program CTR1 for Mode 2: + Rate Generator */ + wdtpci_ctr_mode(2, 1); /* Program CTR2 for Mode 1: + Retriggerable One-Shot */ + wdtpci_ctr_load(0, 20833); /* count at 100Hz */ + wdtpci_ctr_load(1, wd_heartbeat);/* Heartbeat */ + /* DO NOT LOAD CTR2 on PCI card! -- JPN */ + outb(0, WDT_DC); /* Enable watchdog */ + udelay(8); + + spin_unlock_irqrestore(&wdtpci_lock, flags); + return 0; +} + +/** + * wdtpci_stop: + * + * Stop the watchdog driver. + */ + +static int wdtpci_stop(void) +{ + unsigned long flags; + + /* Turn the card off */ + spin_lock_irqsave(&wdtpci_lock, flags); + inb(WDT_DC); /* Disable watchdog */ + udelay(8); + wdtpci_ctr_load(2, 0); /* 0 length reset pulses now */ + spin_unlock_irqrestore(&wdtpci_lock, flags); + return 0; +} + +/** + * wdtpci_ping: + * + * Reload counter one with the watchdog heartbeat. We don't bother + * reloading the cascade counter. + */ + +static int wdtpci_ping(void) +{ + unsigned long flags; + + spin_lock_irqsave(&wdtpci_lock, flags); + /* Write a watchdog value */ + inb(WDT_DC); /* Disable watchdog */ + udelay(8); + wdtpci_ctr_mode(1, 2); /* Re-Program CTR1 for Mode 2: + Rate Generator */ + wdtpci_ctr_load(1, wd_heartbeat);/* Heartbeat */ + outb(0, WDT_DC); /* Enable watchdog */ + udelay(8); + spin_unlock_irqrestore(&wdtpci_lock, flags); + return 0; +} + +/** + * wdtpci_set_heartbeat: + * @t: the new heartbeat value that needs to be set. + * + * Set a new heartbeat value for the watchdog device. If the heartbeat + * value is incorrect we keep the old value and return -EINVAL. + * If successful we return 0. + */ +static int wdtpci_set_heartbeat(int t) +{ + /* Arbitrary, can't find the card's limits */ + if (t < 1 || t > 65535) + return -EINVAL; + + heartbeat = t; + wd_heartbeat = t * 100; + return 0; +} + +/** + * wdtpci_get_status: + * @status: the new status. + * + * Extract the status information from a WDT watchdog device. There are + * several board variants so we have to know which bits are valid. Some + * bits default to one and some to zero in order to be maximally painful. + * + * we then map the bits onto the status ioctl flags. + */ + +static int wdtpci_get_status(int *status) +{ + unsigned char new_status; + unsigned long flags; + + spin_lock_irqsave(&wdtpci_lock, flags); + new_status = inb(WDT_SR); + spin_unlock_irqrestore(&wdtpci_lock, flags); + + *status = 0; + if (new_status & WDC_SR_ISOI0) + *status |= WDIOF_EXTERN1; + if (new_status & WDC_SR_ISII1) + *status |= WDIOF_EXTERN2; + if (type == 501) { + if (!(new_status & WDC_SR_TGOOD)) + *status |= WDIOF_OVERHEAT; + if (!(new_status & WDC_SR_PSUOVER)) + *status |= WDIOF_POWEROVER; + if (!(new_status & WDC_SR_PSUUNDR)) + *status |= WDIOF_POWERUNDER; + if (tachometer) { + if (!(new_status & WDC_SR_FANGOOD)) + *status |= WDIOF_FANFAULT; + } + } + return 0; +} + +/** + * wdtpci_get_temperature: + * + * Reports the temperature in degrees Fahrenheit. The API is in + * farenheit. It was designed by an imperial measurement luddite. + */ + +static int wdtpci_get_temperature(int *temperature) +{ + unsigned short c; + unsigned long flags; + spin_lock_irqsave(&wdtpci_lock, flags); + c = inb(WDT_RT); + udelay(8); + spin_unlock_irqrestore(&wdtpci_lock, flags); + *temperature = (c * 11 / 15) + 7; + return 0; +} + +/** + * wdtpci_interrupt: + * @irq: Interrupt number + * @dev_id: Unused as we don't allow multiple devices. + * + * Handle an interrupt from the board. These are raised when the status + * map changes in what the board considers an interesting way. That means + * a failure condition occurring. + */ + +static irqreturn_t wdtpci_interrupt(int irq, void *dev_id) +{ + /* + * Read the status register see what is up and + * then printk it. + */ + unsigned char status; + + spin_lock(&wdtpci_lock); + + status = inb(WDT_SR); + udelay(8); + + pr_crit("status %d\n", status); + + if (type == 501) { + if (!(status & WDC_SR_TGOOD)) { + pr_crit("Overheat alarm (%d)\n", inb(WDT_RT)); + udelay(8); + } + if (!(status & WDC_SR_PSUOVER)) + pr_crit("PSU over voltage\n"); + if (!(status & WDC_SR_PSUUNDR)) + pr_crit("PSU under voltage\n"); + if (tachometer) { + if (!(status & WDC_SR_FANGOOD)) + pr_crit("Possible fan fault\n"); + } + } + if (!(status & WDC_SR_WCCR)) { +#ifdef SOFTWARE_REBOOT +#ifdef ONLY_TESTING + pr_crit("Would Reboot\n"); +#else + pr_crit("Initiating system reboot\n"); + emergency_restart(); +#endif +#else + pr_crit("Reset in 5ms\n"); +#endif + } + spin_unlock(&wdtpci_lock); + return IRQ_HANDLED; +} + + +/** + * wdtpci_write: + * @file: file handle to the watchdog + * @buf: buffer to write (unused as data does not matter here + * @count: count of bytes + * @ppos: pointer to the position to write. No seeks allowed + * + * A write to a watchdog device is defined as a keepalive signal. Any + * write of data will do, as we we don't define content meaning. + */ + +static ssize_t wdtpci_write(struct file *file, const char __user *buf, + size_t count, loff_t *ppos) +{ + if (count) { + if (!nowayout) { + size_t i; + + /* In case it was set long ago */ + expect_close = 0; + + for (i = 0; i != count; i++) { + char c; + if (get_user(c, buf + i)) + return -EFAULT; + if (c == 'V') + expect_close = 42; + } + } + wdtpci_ping(); + } + return count; +} + +/** + * wdtpci_ioctl: + * @file: file handle to the device + * @cmd: watchdog command + * @arg: argument pointer + * + * The watchdog API defines a common set of functions for all watchdogs + * according to their available features. We only actually usefully support + * querying capabilities and current status. + */ + +static long wdtpci_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) +{ + void __user *argp = (void __user *)arg; + int __user *p = argp; + int new_heartbeat; + int status; + + struct watchdog_info ident = { + .options = WDIOF_SETTIMEOUT| + WDIOF_MAGICCLOSE| + WDIOF_KEEPALIVEPING, + .firmware_version = 1, + .identity = "PCI-WDT500/501", + }; + + /* Add options according to the card we have */ + ident.options |= (WDIOF_EXTERN1|WDIOF_EXTERN2); + if (type == 501) { + ident.options |= (WDIOF_OVERHEAT|WDIOF_POWERUNDER| + WDIOF_POWEROVER); + if (tachometer) + ident.options |= WDIOF_FANFAULT; + } + + switch (cmd) { + case WDIOC_GETSUPPORT: + return copy_to_user(argp, &ident, sizeof(ident)) ? -EFAULT : 0; + case WDIOC_GETSTATUS: + wdtpci_get_status(&status); + return put_user(status, p); + case WDIOC_GETBOOTSTATUS: + return put_user(0, p); + case WDIOC_KEEPALIVE: + wdtpci_ping(); + return 0; + case WDIOC_SETTIMEOUT: + if (get_user(new_heartbeat, p)) + return -EFAULT; + if (wdtpci_set_heartbeat(new_heartbeat)) + return -EINVAL; + wdtpci_ping(); + /* fall through */ + case WDIOC_GETTIMEOUT: + return put_user(heartbeat, p); + default: + return -ENOTTY; + } +} + +/** + * wdtpci_open: + * @inode: inode of device + * @file: file handle to device + * + * The watchdog device has been opened. The watchdog device is single + * open and on opening we load the counters. Counter zero is a 100Hz + * cascade, into counter 1 which downcounts to reboot. When the counter + * triggers counter 2 downcounts the length of the reset pulse which + * set set to be as long as possible. + */ + +static int wdtpci_open(struct inode *inode, struct file *file) +{ + if (test_and_set_bit(0, &open_lock)) + return -EBUSY; + + if (nowayout) + __module_get(THIS_MODULE); + /* + * Activate + */ + wdtpci_start(); + return nonseekable_open(inode, file); +} + +/** + * wdtpci_release: + * @inode: inode to board + * @file: file handle to board + * + * The watchdog has a configurable API. There is a religious dispute + * between people who want their watchdog to be able to shut down and + * those who want to be sure if the watchdog manager dies the machine + * reboots. In the former case we disable the counters, in the latter + * case you have to open it again very soon. + */ + +static int wdtpci_release(struct inode *inode, struct file *file) +{ + if (expect_close == 42) { + wdtpci_stop(); + } else { + pr_crit("Unexpected close, not stopping timer!\n"); + wdtpci_ping(); + } + expect_close = 0; + clear_bit(0, &open_lock); + return 0; +} + +/** + * wdtpci_temp_read: + * @file: file handle to the watchdog board + * @buf: buffer to write 1 byte into + * @count: length of buffer + * @ptr: offset (no seek allowed) + * + * Read reports the temperature in degrees Fahrenheit. The API is in + * fahrenheit. It was designed by an imperial measurement luddite. + */ + +static ssize_t wdtpci_temp_read(struct file *file, char __user *buf, + size_t count, loff_t *ptr) +{ + int temperature; + + if (wdtpci_get_temperature(&temperature)) + return -EFAULT; + + if (copy_to_user(buf, &temperature, 1)) + return -EFAULT; + + return 1; +} + +/** + * wdtpci_temp_open: + * @inode: inode of device + * @file: file handle to device + * + * The temperature device has been opened. + */ + +static int wdtpci_temp_open(struct inode *inode, struct file *file) +{ + return nonseekable_open(inode, file); +} + +/** + * wdtpci_temp_release: + * @inode: inode to board + * @file: file handle to board + * + * The temperature device has been closed. + */ + +static int wdtpci_temp_release(struct inode *inode, struct file *file) +{ + return 0; +} + +/** + * notify_sys: + * @this: our notifier block + * @code: the event being reported + * @unused: unused + * + * Our notifier is called on system shutdowns. We want to turn the card + * off at reboot otherwise the machine will reboot again during memory + * test or worse yet during the following fsck. This would suck, in fact + * trust me - if it happens it does suck. + */ + +static int wdtpci_notify_sys(struct notifier_block *this, unsigned long code, + void *unused) +{ + if (code == SYS_DOWN || code == SYS_HALT) + wdtpci_stop(); + return NOTIFY_DONE; +} + +/* + * Kernel Interfaces + */ + + +static const struct file_operations wdtpci_fops = { + .owner = THIS_MODULE, + .llseek = no_llseek, + .write = wdtpci_write, + .unlocked_ioctl = wdtpci_ioctl, + .open = wdtpci_open, + .release = wdtpci_release, +}; + +static struct miscdevice wdtpci_miscdev = { + .minor = WATCHDOG_MINOR, + .name = "watchdog", + .fops = &wdtpci_fops, +}; + +static const struct file_operations wdtpci_temp_fops = { + .owner = THIS_MODULE, + .llseek = no_llseek, + .read = wdtpci_temp_read, + .open = wdtpci_temp_open, + .release = wdtpci_temp_release, +}; + +static struct miscdevice temp_miscdev = { + .minor = TEMP_MINOR, + .name = "temperature", + .fops = &wdtpci_temp_fops, +}; + +/* + * The WDT card needs to learn about soft shutdowns in order to + * turn the timebomb registers off. + */ + +static struct notifier_block wdtpci_notifier = { + .notifier_call = wdtpci_notify_sys, +}; + + +static int wdtpci_init_one(struct pci_dev *dev, + const struct pci_device_id *ent) +{ + int ret = -EIO; + + dev_count++; + if (dev_count > 1) { + pr_err("This driver only supports one device\n"); + return -ENODEV; + } + + if (type != 500 && type != 501) { + pr_err("unknown card type '%d'\n", type); + return -ENODEV; + } + + if (pci_enable_device(dev)) { + pr_err("Not possible to enable PCI Device\n"); + return -ENODEV; + } + + if (pci_resource_start(dev, 2) == 0x0000) { + pr_err("No I/O-Address for card detected\n"); + ret = -ENODEV; + goto out_pci; + } + + if (pci_request_region(dev, 2, "wdt_pci")) { + pr_err("I/O address 0x%llx already in use\n", + (unsigned long long)pci_resource_start(dev, 2)); + goto out_pci; + } + + irq = dev->irq; + io = pci_resource_start(dev, 2); + + if (request_irq(irq, wdtpci_interrupt, IRQF_SHARED, + "wdt_pci", &wdtpci_miscdev)) { + pr_err("IRQ %d is not free\n", irq); + goto out_reg; + } + + pr_info("PCI-WDT500/501 (PCI-WDG-CSM) driver 0.10 at 0x%llx (Interrupt %d)\n", + (unsigned long long)io, irq); + + /* Check that the heartbeat value is within its range; + if not reset to the default */ + if (wdtpci_set_heartbeat(heartbeat)) { + wdtpci_set_heartbeat(WD_TIMO); + pr_info("heartbeat value must be 0 < heartbeat < 65536, using %d\n", + WD_TIMO); + } + + ret = register_reboot_notifier(&wdtpci_notifier); + if (ret) { + pr_err("cannot register reboot notifier (err=%d)\n", ret); + goto out_irq; + } + + if (type == 501) { + ret = misc_register(&temp_miscdev); + if (ret) { + pr_err("cannot register miscdev on minor=%d (err=%d)\n", + TEMP_MINOR, ret); + goto out_rbt; + } + } + + ret = misc_register(&wdtpci_miscdev); + if (ret) { + pr_err("cannot register miscdev on minor=%d (err=%d)\n", + WATCHDOG_MINOR, ret); + goto out_misc; + } + + pr_info("initialized. heartbeat=%d sec (nowayout=%d)\n", + heartbeat, nowayout); + if (type == 501) + pr_info("Fan Tachometer is %s\n", + tachometer ? "Enabled" : "Disabled"); + + ret = 0; +out: + return ret; + +out_misc: + if (type == 501) + misc_deregister(&temp_miscdev); +out_rbt: + unregister_reboot_notifier(&wdtpci_notifier); +out_irq: + free_irq(irq, &wdtpci_miscdev); +out_reg: + pci_release_region(dev, 2); +out_pci: + pci_disable_device(dev); + goto out; +} + + +static void wdtpci_remove_one(struct pci_dev *pdev) +{ + /* here we assume only one device will ever have + * been picked up and registered by probe function */ + misc_deregister(&wdtpci_miscdev); + if (type == 501) + misc_deregister(&temp_miscdev); + unregister_reboot_notifier(&wdtpci_notifier); + free_irq(irq, &wdtpci_miscdev); + pci_release_region(pdev, 2); + pci_disable_device(pdev); + dev_count--; +} + + +static const struct pci_device_id wdtpci_pci_tbl[] = { + { + .vendor = PCI_VENDOR_ID_ACCESSIO, + .device = PCI_DEVICE_ID_ACCESSIO_WDG_CSM, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + }, + { 0, }, /* terminate list */ +}; +MODULE_DEVICE_TABLE(pci, wdtpci_pci_tbl); + + +static struct pci_driver wdtpci_driver = { + .name = "wdt_pci", + .id_table = wdtpci_pci_tbl, + .probe = wdtpci_init_one, + .remove = wdtpci_remove_one, +}; + +module_pci_driver(wdtpci_driver); + +MODULE_AUTHOR("JP Nollmann, Alan Cox"); +MODULE_DESCRIPTION("Driver for the ICS PCI-WDT500/501 watchdog cards"); +MODULE_LICENSE("GPL"); diff --git a/drivers/watchdog/wm831x_wdt.c b/drivers/watchdog/wm831x_wdt.c new file mode 100644 index 000000000..116c2f47b --- /dev/null +++ b/drivers/watchdog/wm831x_wdt.c @@ -0,0 +1,293 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Watchdog driver for the wm831x PMICs + * + * Copyright (C) 2009 Wolfson Microelectronics + */ + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/types.h> +#include <linux/kernel.h> +#include <linux/slab.h> +#include <linux/platform_device.h> +#include <linux/watchdog.h> +#include <linux/uaccess.h> +#include <linux/gpio.h> + +#include <linux/mfd/wm831x/core.h> +#include <linux/mfd/wm831x/pdata.h> +#include <linux/mfd/wm831x/watchdog.h> + +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); +MODULE_PARM_DESC(nowayout, + "Watchdog cannot be stopped once started (default=" + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); + +struct wm831x_wdt_drvdata { + struct watchdog_device wdt; + struct wm831x *wm831x; + struct mutex lock; + int update_gpio; + int update_state; +}; + +/* We can't use the sub-second values here but they're included + * for completeness. */ +static struct { + unsigned int time; /* Seconds */ + u16 val; /* WDOG_TO value */ +} wm831x_wdt_cfgs[] = { + { 1, 2 }, + { 2, 3 }, + { 4, 4 }, + { 8, 5 }, + { 16, 6 }, + { 32, 7 }, + { 33, 7 }, /* Actually 32.768s so include both, others round down */ +}; + +static int wm831x_wdt_start(struct watchdog_device *wdt_dev) +{ + struct wm831x_wdt_drvdata *driver_data = watchdog_get_drvdata(wdt_dev); + struct wm831x *wm831x = driver_data->wm831x; + int ret; + + mutex_lock(&driver_data->lock); + + ret = wm831x_reg_unlock(wm831x); + if (ret == 0) { + ret = wm831x_set_bits(wm831x, WM831X_WATCHDOG, + WM831X_WDOG_ENA, WM831X_WDOG_ENA); + wm831x_reg_lock(wm831x); + } else { + dev_err(wm831x->dev, "Failed to unlock security key: %d\n", + ret); + } + + mutex_unlock(&driver_data->lock); + + return ret; +} + +static int wm831x_wdt_stop(struct watchdog_device *wdt_dev) +{ + struct wm831x_wdt_drvdata *driver_data = watchdog_get_drvdata(wdt_dev); + struct wm831x *wm831x = driver_data->wm831x; + int ret; + + mutex_lock(&driver_data->lock); + + ret = wm831x_reg_unlock(wm831x); + if (ret == 0) { + ret = wm831x_set_bits(wm831x, WM831X_WATCHDOG, + WM831X_WDOG_ENA, 0); + wm831x_reg_lock(wm831x); + } else { + dev_err(wm831x->dev, "Failed to unlock security key: %d\n", + ret); + } + + mutex_unlock(&driver_data->lock); + + return ret; +} + +static int wm831x_wdt_ping(struct watchdog_device *wdt_dev) +{ + struct wm831x_wdt_drvdata *driver_data = watchdog_get_drvdata(wdt_dev); + struct wm831x *wm831x = driver_data->wm831x; + int ret; + u16 reg; + + mutex_lock(&driver_data->lock); + + if (driver_data->update_gpio) { + gpio_set_value_cansleep(driver_data->update_gpio, + driver_data->update_state); + driver_data->update_state = !driver_data->update_state; + ret = 0; + goto out; + } + + reg = wm831x_reg_read(wm831x, WM831X_WATCHDOG); + + if (!(reg & WM831X_WDOG_RST_SRC)) { + dev_err(wm831x->dev, "Hardware watchdog update unsupported\n"); + ret = -EINVAL; + goto out; + } + + reg |= WM831X_WDOG_RESET; + + ret = wm831x_reg_unlock(wm831x); + if (ret == 0) { + ret = wm831x_reg_write(wm831x, WM831X_WATCHDOG, reg); + wm831x_reg_lock(wm831x); + } else { + dev_err(wm831x->dev, "Failed to unlock security key: %d\n", + ret); + } + +out: + mutex_unlock(&driver_data->lock); + + return ret; +} + +static int wm831x_wdt_set_timeout(struct watchdog_device *wdt_dev, + unsigned int timeout) +{ + struct wm831x_wdt_drvdata *driver_data = watchdog_get_drvdata(wdt_dev); + struct wm831x *wm831x = driver_data->wm831x; + int ret, i; + + for (i = 0; i < ARRAY_SIZE(wm831x_wdt_cfgs); i++) + if (wm831x_wdt_cfgs[i].time == timeout) + break; + if (i == ARRAY_SIZE(wm831x_wdt_cfgs)) + return -EINVAL; + + ret = wm831x_reg_unlock(wm831x); + if (ret == 0) { + ret = wm831x_set_bits(wm831x, WM831X_WATCHDOG, + WM831X_WDOG_TO_MASK, + wm831x_wdt_cfgs[i].val); + wm831x_reg_lock(wm831x); + } else { + dev_err(wm831x->dev, "Failed to unlock security key: %d\n", + ret); + } + + wdt_dev->timeout = timeout; + + return ret; +} + +static const struct watchdog_info wm831x_wdt_info = { + .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE, + .identity = "WM831x Watchdog", +}; + +static const struct watchdog_ops wm831x_wdt_ops = { + .owner = THIS_MODULE, + .start = wm831x_wdt_start, + .stop = wm831x_wdt_stop, + .ping = wm831x_wdt_ping, + .set_timeout = wm831x_wdt_set_timeout, +}; + +static int wm831x_wdt_probe(struct platform_device *pdev) +{ + struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent); + struct wm831x_pdata *chip_pdata = dev_get_platdata(pdev->dev.parent); + struct wm831x_watchdog_pdata *pdata; + struct wm831x_wdt_drvdata *driver_data; + struct watchdog_device *wm831x_wdt; + int reg, ret, i; + + ret = wm831x_reg_read(wm831x, WM831X_WATCHDOG); + if (ret < 0) { + dev_err(wm831x->dev, "Failed to read watchdog status: %d\n", + ret); + return ret; + } + reg = ret; + + if (reg & WM831X_WDOG_DEBUG) + dev_warn(wm831x->dev, "Watchdog is paused\n"); + + driver_data = devm_kzalloc(&pdev->dev, sizeof(*driver_data), + GFP_KERNEL); + if (!driver_data) + return -ENOMEM; + + mutex_init(&driver_data->lock); + driver_data->wm831x = wm831x; + + wm831x_wdt = &driver_data->wdt; + + wm831x_wdt->info = &wm831x_wdt_info; + wm831x_wdt->ops = &wm831x_wdt_ops; + wm831x_wdt->parent = &pdev->dev; + watchdog_set_nowayout(wm831x_wdt, nowayout); + watchdog_set_drvdata(wm831x_wdt, driver_data); + + reg = wm831x_reg_read(wm831x, WM831X_WATCHDOG); + reg &= WM831X_WDOG_TO_MASK; + for (i = 0; i < ARRAY_SIZE(wm831x_wdt_cfgs); i++) + if (wm831x_wdt_cfgs[i].val == reg) + break; + if (i == ARRAY_SIZE(wm831x_wdt_cfgs)) + dev_warn(wm831x->dev, + "Unknown watchdog timeout: %x\n", reg); + else + wm831x_wdt->timeout = wm831x_wdt_cfgs[i].time; + + /* Apply any configuration */ + if (chip_pdata) + pdata = chip_pdata->watchdog; + else + pdata = NULL; + + if (pdata) { + reg &= ~(WM831X_WDOG_SECACT_MASK | WM831X_WDOG_PRIMACT_MASK | + WM831X_WDOG_RST_SRC); + + reg |= pdata->primary << WM831X_WDOG_PRIMACT_SHIFT; + reg |= pdata->secondary << WM831X_WDOG_SECACT_SHIFT; + reg |= pdata->software << WM831X_WDOG_RST_SRC_SHIFT; + + if (pdata->update_gpio) { + ret = devm_gpio_request_one(&pdev->dev, + pdata->update_gpio, + GPIOF_OUT_INIT_LOW, + "Watchdog update"); + if (ret < 0) { + dev_err(wm831x->dev, + "Failed to request update GPIO: %d\n", + ret); + return ret; + } + + driver_data->update_gpio = pdata->update_gpio; + + /* Make sure the watchdog takes hardware updates */ + reg |= WM831X_WDOG_RST_SRC; + } + + ret = wm831x_reg_unlock(wm831x); + if (ret == 0) { + ret = wm831x_reg_write(wm831x, WM831X_WATCHDOG, reg); + wm831x_reg_lock(wm831x); + } else { + dev_err(wm831x->dev, + "Failed to unlock security key: %d\n", ret); + return ret; + } + } + + ret = devm_watchdog_register_device(&pdev->dev, &driver_data->wdt); + if (ret != 0) { + dev_err(wm831x->dev, "watchdog_register_device() failed: %d\n", + ret); + return ret; + } + + return 0; +} + +static struct platform_driver wm831x_wdt_driver = { + .probe = wm831x_wdt_probe, + .driver = { + .name = "wm831x-watchdog", + }, +}; + +module_platform_driver(wm831x_wdt_driver); + +MODULE_AUTHOR("Mark Brown"); +MODULE_DESCRIPTION("WM831x Watchdog"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:wm831x-watchdog"); diff --git a/drivers/watchdog/wm8350_wdt.c b/drivers/watchdog/wm8350_wdt.c new file mode 100644 index 000000000..33c62d51f --- /dev/null +++ b/drivers/watchdog/wm8350_wdt.c @@ -0,0 +1,178 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Watchdog driver for the wm8350 + * + * Copyright (C) 2007, 2008 Wolfson Microelectronics <linux@wolfsonmicro.com> + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/types.h> +#include <linux/kernel.h> +#include <linux/platform_device.h> +#include <linux/watchdog.h> +#include <linux/uaccess.h> +#include <linux/mfd/wm8350/core.h> + +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); +MODULE_PARM_DESC(nowayout, + "Watchdog cannot be stopped once started (default=" + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); + +static DEFINE_MUTEX(wdt_mutex); + +static struct { + unsigned int time; /* Seconds */ + u16 val; /* To be set in WM8350_SYSTEM_CONTROL_2 */ +} wm8350_wdt_cfgs[] = { + { 1, 0x02 }, + { 2, 0x04 }, + { 4, 0x05 }, +}; + +static int wm8350_wdt_set_timeout(struct watchdog_device *wdt_dev, + unsigned int timeout) +{ + struct wm8350 *wm8350 = watchdog_get_drvdata(wdt_dev); + int ret, i; + u16 reg; + + for (i = 0; i < ARRAY_SIZE(wm8350_wdt_cfgs); i++) + if (wm8350_wdt_cfgs[i].time == timeout) + break; + if (i == ARRAY_SIZE(wm8350_wdt_cfgs)) + return -EINVAL; + + mutex_lock(&wdt_mutex); + wm8350_reg_unlock(wm8350); + + reg = wm8350_reg_read(wm8350, WM8350_SYSTEM_CONTROL_2); + reg &= ~WM8350_WDOG_TO_MASK; + reg |= wm8350_wdt_cfgs[i].val; + ret = wm8350_reg_write(wm8350, WM8350_SYSTEM_CONTROL_2, reg); + + wm8350_reg_lock(wm8350); + mutex_unlock(&wdt_mutex); + + wdt_dev->timeout = timeout; + return ret; +} + +static int wm8350_wdt_start(struct watchdog_device *wdt_dev) +{ + struct wm8350 *wm8350 = watchdog_get_drvdata(wdt_dev); + int ret; + u16 reg; + + mutex_lock(&wdt_mutex); + wm8350_reg_unlock(wm8350); + + reg = wm8350_reg_read(wm8350, WM8350_SYSTEM_CONTROL_2); + reg &= ~WM8350_WDOG_MODE_MASK; + reg |= 0x20; + ret = wm8350_reg_write(wm8350, WM8350_SYSTEM_CONTROL_2, reg); + + wm8350_reg_lock(wm8350); + mutex_unlock(&wdt_mutex); + + return ret; +} + +static int wm8350_wdt_stop(struct watchdog_device *wdt_dev) +{ + struct wm8350 *wm8350 = watchdog_get_drvdata(wdt_dev); + int ret; + u16 reg; + + mutex_lock(&wdt_mutex); + wm8350_reg_unlock(wm8350); + + reg = wm8350_reg_read(wm8350, WM8350_SYSTEM_CONTROL_2); + reg &= ~WM8350_WDOG_MODE_MASK; + ret = wm8350_reg_write(wm8350, WM8350_SYSTEM_CONTROL_2, reg); + + wm8350_reg_lock(wm8350); + mutex_unlock(&wdt_mutex); + + return ret; +} + +static int wm8350_wdt_ping(struct watchdog_device *wdt_dev) +{ + struct wm8350 *wm8350 = watchdog_get_drvdata(wdt_dev); + int ret; + u16 reg; + + mutex_lock(&wdt_mutex); + + reg = wm8350_reg_read(wm8350, WM8350_SYSTEM_CONTROL_2); + ret = wm8350_reg_write(wm8350, WM8350_SYSTEM_CONTROL_2, reg); + + mutex_unlock(&wdt_mutex); + + return ret; +} + +static const struct watchdog_info wm8350_wdt_info = { + .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE, + .identity = "WM8350 Watchdog", +}; + +static const struct watchdog_ops wm8350_wdt_ops = { + .owner = THIS_MODULE, + .start = wm8350_wdt_start, + .stop = wm8350_wdt_stop, + .ping = wm8350_wdt_ping, + .set_timeout = wm8350_wdt_set_timeout, +}; + +static struct watchdog_device wm8350_wdt = { + .info = &wm8350_wdt_info, + .ops = &wm8350_wdt_ops, + .timeout = 4, + .min_timeout = 1, + .max_timeout = 4, +}; + +static int wm8350_wdt_probe(struct platform_device *pdev) +{ + struct wm8350 *wm8350 = platform_get_drvdata(pdev); + + if (!wm8350) { + pr_err("No driver data supplied\n"); + return -ENODEV; + } + + watchdog_set_nowayout(&wm8350_wdt, nowayout); + watchdog_set_drvdata(&wm8350_wdt, wm8350); + wm8350_wdt.parent = &pdev->dev; + + /* Default to 4s timeout */ + wm8350_wdt_set_timeout(&wm8350_wdt, 4); + + return watchdog_register_device(&wm8350_wdt); +} + +static int wm8350_wdt_remove(struct platform_device *pdev) +{ + watchdog_unregister_device(&wm8350_wdt); + return 0; +} + +static struct platform_driver wm8350_wdt_driver = { + .probe = wm8350_wdt_probe, + .remove = wm8350_wdt_remove, + .driver = { + .name = "wm8350-wdt", + }, +}; + +module_platform_driver(wm8350_wdt_driver); + +MODULE_AUTHOR("Mark Brown"); +MODULE_DESCRIPTION("WM8350 Watchdog"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:wm8350-wdt"); diff --git a/drivers/watchdog/xen_wdt.c b/drivers/watchdog/xen_wdt.c new file mode 100644 index 000000000..f1c016d01 --- /dev/null +++ b/drivers/watchdog/xen_wdt.c @@ -0,0 +1,216 @@ +/* + * Xen Watchdog Driver + * + * (c) Copyright 2010 Novell, Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#define DRV_NAME "xen_wdt" + +#include <linux/bug.h> +#include <linux/errno.h> +#include <linux/fs.h> +#include <linux/hrtimer.h> +#include <linux/kernel.h> +#include <linux/ktime.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/platform_device.h> +#include <linux/watchdog.h> +#include <xen/xen.h> +#include <asm/xen/hypercall.h> +#include <xen/interface/sched.h> + +static struct platform_device *platform_device; +static struct sched_watchdog wdt; +static time64_t wdt_expires; + +#define WATCHDOG_TIMEOUT 60 /* in seconds */ +static unsigned int timeout; +module_param(timeout, uint, S_IRUGO); +MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds " + "(default=" __MODULE_STRING(WATCHDOG_TIMEOUT) ")"); + +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, S_IRUGO); +MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started " + "(default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); + +static inline time64_t set_timeout(struct watchdog_device *wdd) +{ + wdt.timeout = wdd->timeout; + return ktime_get_seconds() + wdd->timeout; +} + +static int xen_wdt_start(struct watchdog_device *wdd) +{ + time64_t expires; + int err; + + expires = set_timeout(wdd); + if (!wdt.id) + err = HYPERVISOR_sched_op(SCHEDOP_watchdog, &wdt); + else + err = -EBUSY; + if (err > 0) { + wdt.id = err; + wdt_expires = expires; + err = 0; + } else + BUG_ON(!err); + + return err; +} + +static int xen_wdt_stop(struct watchdog_device *wdd) +{ + int err = 0; + + wdt.timeout = 0; + if (wdt.id) + err = HYPERVISOR_sched_op(SCHEDOP_watchdog, &wdt); + if (!err) + wdt.id = 0; + + return err; +} + +static int xen_wdt_kick(struct watchdog_device *wdd) +{ + time64_t expires; + int err; + + expires = set_timeout(wdd); + if (wdt.id) + err = HYPERVISOR_sched_op(SCHEDOP_watchdog, &wdt); + else + err = -ENXIO; + if (!err) + wdt_expires = expires; + + return err; +} + +static unsigned int xen_wdt_get_timeleft(struct watchdog_device *wdd) +{ + return wdt_expires - ktime_get_seconds(); +} + +static struct watchdog_info xen_wdt_info = { + .identity = DRV_NAME, + .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE, +}; + +static const struct watchdog_ops xen_wdt_ops = { + .owner = THIS_MODULE, + .start = xen_wdt_start, + .stop = xen_wdt_stop, + .ping = xen_wdt_kick, + .get_timeleft = xen_wdt_get_timeleft, +}; + +static struct watchdog_device xen_wdt_dev = { + .info = &xen_wdt_info, + .ops = &xen_wdt_ops, + .timeout = WATCHDOG_TIMEOUT, +}; + +static int xen_wdt_probe(struct platform_device *pdev) +{ + struct sched_watchdog wd = { .id = ~0 }; + int ret = HYPERVISOR_sched_op(SCHEDOP_watchdog, &wd); + + if (ret == -ENOSYS) { + dev_err(&pdev->dev, "watchdog not supported by hypervisor\n"); + return -ENODEV; + } + + if (ret != -EINVAL) { + dev_err(&pdev->dev, "unexpected hypervisor error (%d)\n", ret); + return -ENODEV; + } + + if (watchdog_init_timeout(&xen_wdt_dev, timeout, NULL)) + dev_info(&pdev->dev, "timeout value invalid, using %d\n", + xen_wdt_dev.timeout); + watchdog_set_nowayout(&xen_wdt_dev, nowayout); + watchdog_stop_on_reboot(&xen_wdt_dev); + watchdog_stop_on_unregister(&xen_wdt_dev); + + ret = devm_watchdog_register_device(&pdev->dev, &xen_wdt_dev); + if (ret) { + dev_err(&pdev->dev, "cannot register watchdog device (%d)\n", + ret); + return ret; + } + + dev_info(&pdev->dev, "initialized (timeout=%ds, nowayout=%d)\n", + xen_wdt_dev.timeout, nowayout); + + return 0; +} + +static int xen_wdt_suspend(struct platform_device *dev, pm_message_t state) +{ + typeof(wdt.id) id = wdt.id; + int rc = xen_wdt_stop(&xen_wdt_dev); + + wdt.id = id; + return rc; +} + +static int xen_wdt_resume(struct platform_device *dev) +{ + if (!wdt.id) + return 0; + wdt.id = 0; + return xen_wdt_start(&xen_wdt_dev); +} + +static struct platform_driver xen_wdt_driver = { + .probe = xen_wdt_probe, + .suspend = xen_wdt_suspend, + .resume = xen_wdt_resume, + .driver = { + .name = DRV_NAME, + }, +}; + +static int __init xen_wdt_init_module(void) +{ + int err; + + if (!xen_domain()) + return -ENODEV; + + err = platform_driver_register(&xen_wdt_driver); + if (err) + return err; + + platform_device = platform_device_register_simple(DRV_NAME, + -1, NULL, 0); + if (IS_ERR(platform_device)) { + err = PTR_ERR(platform_device); + platform_driver_unregister(&xen_wdt_driver); + } + + return err; +} + +static void __exit xen_wdt_cleanup_module(void) +{ + platform_device_unregister(platform_device); + platform_driver_unregister(&xen_wdt_driver); +} + +module_init(xen_wdt_init_module); +module_exit(xen_wdt_cleanup_module); + +MODULE_AUTHOR("Jan Beulich <jbeulich@novell.com>"); +MODULE_DESCRIPTION("Xen WatchDog Timer Driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/watchdog/ziirave_wdt.c b/drivers/watchdog/ziirave_wdt.c new file mode 100644 index 000000000..d3594aa3a --- /dev/null +++ b/drivers/watchdog/ziirave_wdt.c @@ -0,0 +1,766 @@ +/* + * Copyright (C) 2015 Zodiac Inflight Innovations + * + * Author: Martyn Welch <martyn.welch@collabora.co.uk> + * + * Based on twl4030_wdt.c by Timo Kokkonen <timo.t.kokkonen at nokia.com>: + * + * Copyright (C) Nokia Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/delay.h> +#include <linux/i2c.h> +#include <linux/ihex.h> +#include <linux/firmware.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/sysfs.h> +#include <linux/types.h> +#include <linux/version.h> +#include <linux/watchdog.h> + +#define ZIIRAVE_TIMEOUT_MIN 3 +#define ZIIRAVE_TIMEOUT_MAX 255 + +#define ZIIRAVE_PING_VALUE 0x0 + +#define ZIIRAVE_STATE_INITIAL 0x0 +#define ZIIRAVE_STATE_OFF 0x1 +#define ZIIRAVE_STATE_ON 0x2 + +#define ZIIRAVE_FW_NAME "ziirave_wdt.fw" + +static char *ziirave_reasons[] = {"power cycle", "hw watchdog", NULL, NULL, + "host request", NULL, "illegal configuration", + "illegal instruction", "illegal trap", + "unknown"}; + +#define ZIIRAVE_WDT_FIRM_VER_MAJOR 0x1 +#define ZIIRAVE_WDT_BOOT_VER_MAJOR 0x3 +#define ZIIRAVE_WDT_RESET_REASON 0x5 +#define ZIIRAVE_WDT_STATE 0x6 +#define ZIIRAVE_WDT_TIMEOUT 0x7 +#define ZIIRAVE_WDT_TIME_LEFT 0x8 +#define ZIIRAVE_WDT_PING 0x9 +#define ZIIRAVE_WDT_RESET_DURATION 0xa + +#define ZIIRAVE_FIRM_PKT_TOTAL_SIZE 20 +#define ZIIRAVE_FIRM_PKT_DATA_SIZE 16 +#define ZIIRAVE_FIRM_FLASH_MEMORY_START 0x1600 +#define ZIIRAVE_FIRM_FLASH_MEMORY_END 0x2bbf + +/* Received and ready for next Download packet. */ +#define ZIIRAVE_FIRM_DOWNLOAD_ACK 1 +/* Currently writing to flash. Retry Download status in a moment! */ +#define ZIIRAVE_FIRM_DOWNLOAD_BUSY 2 + +/* Wait for ACK timeout in ms */ +#define ZIIRAVE_FIRM_WAIT_FOR_ACK_TIMEOUT 50 + +/* Firmware commands */ +#define ZIIRAVE_CMD_DOWNLOAD_START 0x10 +#define ZIIRAVE_CMD_DOWNLOAD_END 0x11 +#define ZIIRAVE_CMD_DOWNLOAD_SET_READ_ADDR 0x12 +#define ZIIRAVE_CMD_DOWNLOAD_READ_BYTE 0x13 +#define ZIIRAVE_CMD_RESET_PROCESSOR 0x0b +#define ZIIRAVE_CMD_JUMP_TO_BOOTLOADER 0x0c +#define ZIIRAVE_CMD_DOWNLOAD_PACKET 0x0e + +struct ziirave_wdt_rev { + unsigned char major; + unsigned char minor; +}; + +struct ziirave_wdt_data { + struct mutex sysfs_mutex; + struct watchdog_device wdd; + struct ziirave_wdt_rev bootloader_rev; + struct ziirave_wdt_rev firmware_rev; + int reset_reason; +}; + +static int wdt_timeout; +module_param(wdt_timeout, int, 0); +MODULE_PARM_DESC(wdt_timeout, "Watchdog timeout in seconds"); + +static int reset_duration; +module_param(reset_duration, int, 0); +MODULE_PARM_DESC(reset_duration, + "Watchdog reset pulse duration in milliseconds"); + +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); +MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started default=" + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); + +static int ziirave_wdt_revision(struct i2c_client *client, + struct ziirave_wdt_rev *rev, u8 command) +{ + int ret; + + ret = i2c_smbus_read_byte_data(client, command); + if (ret < 0) + return ret; + + rev->major = ret; + + ret = i2c_smbus_read_byte_data(client, command + 1); + if (ret < 0) + return ret; + + rev->minor = ret; + + return 0; +} + +static int ziirave_wdt_set_state(struct watchdog_device *wdd, int state) +{ + struct i2c_client *client = to_i2c_client(wdd->parent); + + return i2c_smbus_write_byte_data(client, ZIIRAVE_WDT_STATE, state); +} + +static int ziirave_wdt_start(struct watchdog_device *wdd) +{ + return ziirave_wdt_set_state(wdd, ZIIRAVE_STATE_ON); +} + +static int ziirave_wdt_stop(struct watchdog_device *wdd) +{ + return ziirave_wdt_set_state(wdd, ZIIRAVE_STATE_OFF); +} + +static int ziirave_wdt_ping(struct watchdog_device *wdd) +{ + struct i2c_client *client = to_i2c_client(wdd->parent); + + return i2c_smbus_write_byte_data(client, ZIIRAVE_WDT_PING, + ZIIRAVE_PING_VALUE); +} + +static int ziirave_wdt_set_timeout(struct watchdog_device *wdd, + unsigned int timeout) +{ + struct i2c_client *client = to_i2c_client(wdd->parent); + int ret; + + ret = i2c_smbus_write_byte_data(client, ZIIRAVE_WDT_TIMEOUT, timeout); + if (!ret) + wdd->timeout = timeout; + + return ret; +} + +static unsigned int ziirave_wdt_get_timeleft(struct watchdog_device *wdd) +{ + struct i2c_client *client = to_i2c_client(wdd->parent); + int ret; + + ret = i2c_smbus_read_byte_data(client, ZIIRAVE_WDT_TIME_LEFT); + if (ret < 0) + ret = 0; + + return ret; +} + +static int ziirave_firm_wait_for_ack(struct watchdog_device *wdd) +{ + struct i2c_client *client = to_i2c_client(wdd->parent); + int ret; + unsigned long timeout; + + timeout = jiffies + msecs_to_jiffies(ZIIRAVE_FIRM_WAIT_FOR_ACK_TIMEOUT); + do { + if (time_after(jiffies, timeout)) + return -ETIMEDOUT; + + usleep_range(5000, 10000); + + ret = i2c_smbus_read_byte(client); + if (ret < 0) { + dev_err(&client->dev, "Failed to read byte\n"); + return ret; + } + } while (ret == ZIIRAVE_FIRM_DOWNLOAD_BUSY); + + return ret == ZIIRAVE_FIRM_DOWNLOAD_ACK ? 0 : -EIO; +} + +static int ziirave_firm_set_read_addr(struct watchdog_device *wdd, u16 addr) +{ + struct i2c_client *client = to_i2c_client(wdd->parent); + u8 address[2]; + + address[0] = addr & 0xff; + address[1] = (addr >> 8) & 0xff; + + return i2c_smbus_write_block_data(client, + ZIIRAVE_CMD_DOWNLOAD_SET_READ_ADDR, + ARRAY_SIZE(address), address); +} + +static int ziirave_firm_write_block_data(struct watchdog_device *wdd, + u8 command, u8 length, const u8 *data, + bool wait_for_ack) +{ + struct i2c_client *client = to_i2c_client(wdd->parent); + int ret; + + ret = i2c_smbus_write_block_data(client, command, length, data); + if (ret) { + dev_err(&client->dev, + "Failed to send command 0x%02x: %d\n", command, ret); + return ret; + } + + if (wait_for_ack) + ret = ziirave_firm_wait_for_ack(wdd); + + return ret; +} + +static int ziirave_firm_write_byte(struct watchdog_device *wdd, u8 command, + u8 byte, bool wait_for_ack) +{ + return ziirave_firm_write_block_data(wdd, command, 1, &byte, + wait_for_ack); +} + +/* + * ziirave_firm_write_pkt() - Build and write a firmware packet + * + * A packet to send to the firmware is composed by following bytes: + * Length | Addr0 | Addr1 | Data0 .. Data15 | Checksum | + * Where, + * Length: A data byte containing the length of the data. + * Addr0: Low byte of the address. + * Addr1: High byte of the address. + * Data0 .. Data15: Array of 16 bytes of data. + * Checksum: Checksum byte to verify data integrity. + */ +static int ziirave_firm_write_pkt(struct watchdog_device *wdd, + const struct ihex_binrec *rec) +{ + struct i2c_client *client = to_i2c_client(wdd->parent); + u8 i, checksum = 0, packet[ZIIRAVE_FIRM_PKT_TOTAL_SIZE]; + int ret; + u16 addr; + + memset(packet, 0, ARRAY_SIZE(packet)); + + /* Packet length */ + packet[0] = (u8)be16_to_cpu(rec->len); + /* Packet address */ + addr = (be32_to_cpu(rec->addr) & 0xffff) >> 1; + packet[1] = addr & 0xff; + packet[2] = (addr & 0xff00) >> 8; + + /* Packet data */ + if (be16_to_cpu(rec->len) > ZIIRAVE_FIRM_PKT_DATA_SIZE) + return -EMSGSIZE; + memcpy(packet + 3, rec->data, be16_to_cpu(rec->len)); + + /* Packet checksum */ + for (i = 0; i < ZIIRAVE_FIRM_PKT_TOTAL_SIZE - 1; i++) + checksum += packet[i]; + packet[ZIIRAVE_FIRM_PKT_TOTAL_SIZE - 1] = checksum; + + ret = ziirave_firm_write_block_data(wdd, ZIIRAVE_CMD_DOWNLOAD_PACKET, + ARRAY_SIZE(packet), packet, true); + if (ret) + dev_err(&client->dev, + "Failed to write firmware packet at address 0x%04x: %d\n", + addr, ret); + + return ret; +} + +static int ziirave_firm_verify(struct watchdog_device *wdd, + const struct firmware *fw) +{ + struct i2c_client *client = to_i2c_client(wdd->parent); + const struct ihex_binrec *rec; + int i, ret; + u8 data[ZIIRAVE_FIRM_PKT_DATA_SIZE]; + u16 addr; + + for (rec = (void *)fw->data; rec; rec = ihex_next_binrec(rec)) { + /* Zero length marks end of records */ + if (!be16_to_cpu(rec->len)) + break; + + addr = (be32_to_cpu(rec->addr) & 0xffff) >> 1; + if (addr < ZIIRAVE_FIRM_FLASH_MEMORY_START || + addr > ZIIRAVE_FIRM_FLASH_MEMORY_END) + continue; + + ret = ziirave_firm_set_read_addr(wdd, addr); + if (ret) { + dev_err(&client->dev, + "Failed to send SET_READ_ADDR command: %d\n", + ret); + return ret; + } + + for (i = 0; i < ARRAY_SIZE(data); i++) { + ret = i2c_smbus_read_byte_data(client, + ZIIRAVE_CMD_DOWNLOAD_READ_BYTE); + if (ret < 0) { + dev_err(&client->dev, + "Failed to READ DATA: %d\n", ret); + return ret; + } + data[i] = ret; + } + + if (memcmp(data, rec->data, be16_to_cpu(rec->len))) { + dev_err(&client->dev, + "Firmware mismatch at address 0x%04x\n", addr); + return -EINVAL; + } + } + + return 0; +} + +static int ziirave_firm_upload(struct watchdog_device *wdd, + const struct firmware *fw) +{ + struct i2c_client *client = to_i2c_client(wdd->parent); + int ret, words_till_page_break; + const struct ihex_binrec *rec; + struct ihex_binrec *rec_new; + + ret = ziirave_firm_write_byte(wdd, ZIIRAVE_CMD_JUMP_TO_BOOTLOADER, 1, + false); + if (ret) + return ret; + + msleep(500); + + ret = ziirave_firm_write_byte(wdd, ZIIRAVE_CMD_DOWNLOAD_START, 1, true); + if (ret) + return ret; + + msleep(500); + + for (rec = (void *)fw->data; rec; rec = ihex_next_binrec(rec)) { + /* Zero length marks end of records */ + if (!be16_to_cpu(rec->len)) + break; + + /* Check max data size */ + if (be16_to_cpu(rec->len) > ZIIRAVE_FIRM_PKT_DATA_SIZE) { + dev_err(&client->dev, "Firmware packet too long (%d)\n", + be16_to_cpu(rec->len)); + return -EMSGSIZE; + } + + /* Calculate words till page break */ + words_till_page_break = (64 - ((be32_to_cpu(rec->addr) >> 1) & + 0x3f)); + if ((be16_to_cpu(rec->len) >> 1) > words_till_page_break) { + /* + * Data in passes page boundary, so we need to split in + * two blocks of data. Create a packet with the first + * block of data. + */ + rec_new = kzalloc(sizeof(struct ihex_binrec) + + (words_till_page_break << 1), + GFP_KERNEL); + if (!rec_new) + return -ENOMEM; + + rec_new->len = cpu_to_be16(words_till_page_break << 1); + rec_new->addr = rec->addr; + memcpy(rec_new->data, rec->data, + be16_to_cpu(rec_new->len)); + + ret = ziirave_firm_write_pkt(wdd, rec_new); + kfree(rec_new); + if (ret) + return ret; + + /* Create a packet with the second block of data */ + rec_new = kzalloc(sizeof(struct ihex_binrec) + + be16_to_cpu(rec->len) - + (words_till_page_break << 1), + GFP_KERNEL); + if (!rec_new) + return -ENOMEM; + + /* Remaining bytes */ + rec_new->len = rec->len - + cpu_to_be16(words_till_page_break << 1); + + rec_new->addr = cpu_to_be32(be32_to_cpu(rec->addr) + + (words_till_page_break << 1)); + + memcpy(rec_new->data, + rec->data + (words_till_page_break << 1), + be16_to_cpu(rec_new->len)); + + ret = ziirave_firm_write_pkt(wdd, rec_new); + kfree(rec_new); + if (ret) + return ret; + } else { + ret = ziirave_firm_write_pkt(wdd, rec); + if (ret) + return ret; + } + } + + /* For end of download, the length field will be set to 0 */ + rec_new = kzalloc(sizeof(struct ihex_binrec) + 1, GFP_KERNEL); + if (!rec_new) + return -ENOMEM; + + ret = ziirave_firm_write_pkt(wdd, rec_new); + kfree(rec_new); + if (ret) { + dev_err(&client->dev, "Failed to send EMPTY packet: %d\n", ret); + return ret; + } + + /* This sleep seems to be required */ + msleep(20); + + /* Start firmware verification */ + ret = ziirave_firm_verify(wdd, fw); + if (ret) { + dev_err(&client->dev, + "Failed to verify firmware: %d\n", ret); + return ret; + } + + /* End download operation */ + ret = ziirave_firm_write_byte(wdd, ZIIRAVE_CMD_DOWNLOAD_END, 1, false); + if (ret) + return ret; + + /* Reset the processor */ + ret = ziirave_firm_write_byte(wdd, ZIIRAVE_CMD_RESET_PROCESSOR, 1, + false); + if (ret) + return ret; + + msleep(500); + + return 0; +} + +static const struct watchdog_info ziirave_wdt_info = { + .options = WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE | WDIOF_KEEPALIVEPING, + .identity = "Zodiac RAVE Watchdog", +}; + +static const struct watchdog_ops ziirave_wdt_ops = { + .owner = THIS_MODULE, + .start = ziirave_wdt_start, + .stop = ziirave_wdt_stop, + .ping = ziirave_wdt_ping, + .set_timeout = ziirave_wdt_set_timeout, + .get_timeleft = ziirave_wdt_get_timeleft, +}; + +static ssize_t ziirave_wdt_sysfs_show_firm(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct i2c_client *client = to_i2c_client(dev->parent); + struct ziirave_wdt_data *w_priv = i2c_get_clientdata(client); + int ret; + + ret = mutex_lock_interruptible(&w_priv->sysfs_mutex); + if (ret) + return ret; + + ret = sprintf(buf, "02.%02u.%02u", w_priv->firmware_rev.major, + w_priv->firmware_rev.minor); + + mutex_unlock(&w_priv->sysfs_mutex); + + return ret; +} + +static DEVICE_ATTR(firmware_version, S_IRUGO, ziirave_wdt_sysfs_show_firm, + NULL); + +static ssize_t ziirave_wdt_sysfs_show_boot(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct i2c_client *client = to_i2c_client(dev->parent); + struct ziirave_wdt_data *w_priv = i2c_get_clientdata(client); + int ret; + + ret = mutex_lock_interruptible(&w_priv->sysfs_mutex); + if (ret) + return ret; + + ret = sprintf(buf, "01.%02u.%02u", w_priv->bootloader_rev.major, + w_priv->bootloader_rev.minor); + + mutex_unlock(&w_priv->sysfs_mutex); + + return ret; +} + +static DEVICE_ATTR(bootloader_version, S_IRUGO, ziirave_wdt_sysfs_show_boot, + NULL); + +static ssize_t ziirave_wdt_sysfs_show_reason(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct i2c_client *client = to_i2c_client(dev->parent); + struct ziirave_wdt_data *w_priv = i2c_get_clientdata(client); + int ret; + + ret = mutex_lock_interruptible(&w_priv->sysfs_mutex); + if (ret) + return ret; + + ret = sprintf(buf, "%s", ziirave_reasons[w_priv->reset_reason]); + + mutex_unlock(&w_priv->sysfs_mutex); + + return ret; +} + +static DEVICE_ATTR(reset_reason, S_IRUGO, ziirave_wdt_sysfs_show_reason, + NULL); + +static ssize_t ziirave_wdt_sysfs_store_firm(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct i2c_client *client = to_i2c_client(dev->parent); + struct ziirave_wdt_data *w_priv = i2c_get_clientdata(client); + const struct firmware *fw; + int err; + + err = request_ihex_firmware(&fw, ZIIRAVE_FW_NAME, dev); + if (err) { + dev_err(&client->dev, "Failed to request ihex firmware\n"); + return err; + } + + err = mutex_lock_interruptible(&w_priv->sysfs_mutex); + if (err) + goto release_firmware; + + err = ziirave_firm_upload(&w_priv->wdd, fw); + if (err) { + dev_err(&client->dev, "The firmware update failed: %d\n", err); + goto unlock_mutex; + } + + /* Update firmware version */ + err = ziirave_wdt_revision(client, &w_priv->firmware_rev, + ZIIRAVE_WDT_FIRM_VER_MAJOR); + if (err) { + dev_err(&client->dev, "Failed to read firmware version: %d\n", + err); + goto unlock_mutex; + } + + dev_info(&client->dev, "Firmware updated to version 02.%02u.%02u\n", + w_priv->firmware_rev.major, w_priv->firmware_rev.minor); + + /* Restore the watchdog timeout */ + err = ziirave_wdt_set_timeout(&w_priv->wdd, w_priv->wdd.timeout); + if (err) + dev_err(&client->dev, "Failed to set timeout: %d\n", err); + +unlock_mutex: + mutex_unlock(&w_priv->sysfs_mutex); + +release_firmware: + release_firmware(fw); + + return err ? err : count; +} + +static DEVICE_ATTR(update_firmware, S_IWUSR, NULL, + ziirave_wdt_sysfs_store_firm); + +static struct attribute *ziirave_wdt_attrs[] = { + &dev_attr_firmware_version.attr, + &dev_attr_bootloader_version.attr, + &dev_attr_reset_reason.attr, + &dev_attr_update_firmware.attr, + NULL +}; +ATTRIBUTE_GROUPS(ziirave_wdt); + +static int ziirave_wdt_init_duration(struct i2c_client *client) +{ + int ret; + + if (!reset_duration) { + /* See if the reset pulse duration is provided in an of_node */ + if (!client->dev.of_node) + ret = -ENODEV; + else + ret = of_property_read_u32(client->dev.of_node, + "reset-duration-ms", + &reset_duration); + if (ret) { + dev_info(&client->dev, + "Unable to set reset pulse duration, using default\n"); + return 0; + } + } + + if (reset_duration < 1 || reset_duration > 255) + return -EINVAL; + + dev_info(&client->dev, "Setting reset duration to %dms", + reset_duration); + + return i2c_smbus_write_byte_data(client, ZIIRAVE_WDT_RESET_DURATION, + reset_duration); +} + +static int ziirave_wdt_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + int ret; + struct ziirave_wdt_data *w_priv; + int val; + + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) + return -ENODEV; + + w_priv = devm_kzalloc(&client->dev, sizeof(*w_priv), GFP_KERNEL); + if (!w_priv) + return -ENOMEM; + + mutex_init(&w_priv->sysfs_mutex); + + w_priv->wdd.info = &ziirave_wdt_info; + w_priv->wdd.ops = &ziirave_wdt_ops; + w_priv->wdd.min_timeout = ZIIRAVE_TIMEOUT_MIN; + w_priv->wdd.max_timeout = ZIIRAVE_TIMEOUT_MAX; + w_priv->wdd.parent = &client->dev; + w_priv->wdd.groups = ziirave_wdt_groups; + + ret = watchdog_init_timeout(&w_priv->wdd, wdt_timeout, &client->dev); + if (ret) { + dev_info(&client->dev, + "Unable to select timeout value, using default\n"); + } + + /* + * The default value set in the watchdog should be perfectly valid, so + * pass that in if we haven't provided one via the module parameter or + * of property. + */ + if (w_priv->wdd.timeout == 0) { + val = i2c_smbus_read_byte_data(client, ZIIRAVE_WDT_TIMEOUT); + if (val < 0) + return val; + + if (val < ZIIRAVE_TIMEOUT_MIN) + return -ENODEV; + + w_priv->wdd.timeout = val; + } else { + ret = ziirave_wdt_set_timeout(&w_priv->wdd, + w_priv->wdd.timeout); + if (ret) + return ret; + + dev_info(&client->dev, "Timeout set to %ds.", + w_priv->wdd.timeout); + } + + watchdog_set_nowayout(&w_priv->wdd, nowayout); + + i2c_set_clientdata(client, w_priv); + + /* If in unconfigured state, set to stopped */ + val = i2c_smbus_read_byte_data(client, ZIIRAVE_WDT_STATE); + if (val < 0) + return val; + + if (val == ZIIRAVE_STATE_INITIAL) + ziirave_wdt_stop(&w_priv->wdd); + + ret = ziirave_wdt_init_duration(client); + if (ret) + return ret; + + ret = ziirave_wdt_revision(client, &w_priv->firmware_rev, + ZIIRAVE_WDT_FIRM_VER_MAJOR); + if (ret) + return ret; + + ret = ziirave_wdt_revision(client, &w_priv->bootloader_rev, + ZIIRAVE_WDT_BOOT_VER_MAJOR); + if (ret) + return ret; + + w_priv->reset_reason = i2c_smbus_read_byte_data(client, + ZIIRAVE_WDT_RESET_REASON); + if (w_priv->reset_reason < 0) + return w_priv->reset_reason; + + if (w_priv->reset_reason >= ARRAY_SIZE(ziirave_reasons) || + !ziirave_reasons[w_priv->reset_reason]) + return -ENODEV; + + ret = watchdog_register_device(&w_priv->wdd); + + return ret; +} + +static int ziirave_wdt_remove(struct i2c_client *client) +{ + struct ziirave_wdt_data *w_priv = i2c_get_clientdata(client); + + watchdog_unregister_device(&w_priv->wdd); + + return 0; +} + +static const struct i2c_device_id ziirave_wdt_id[] = { + { "rave-wdt", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, ziirave_wdt_id); + +static const struct of_device_id zrv_wdt_of_match[] = { + { .compatible = "zii,rave-wdt", }, + { }, +}; +MODULE_DEVICE_TABLE(of, zrv_wdt_of_match); + +static struct i2c_driver ziirave_wdt_driver = { + .driver = { + .name = "ziirave_wdt", + .of_match_table = zrv_wdt_of_match, + }, + .probe = ziirave_wdt_probe, + .remove = ziirave_wdt_remove, + .id_table = ziirave_wdt_id, +}; + +module_i2c_driver(ziirave_wdt_driver); + +MODULE_AUTHOR("Martyn Welch <martyn.welch@collabora.co.uk"); +MODULE_DESCRIPTION("Zodiac Aerospace RAVE Switch Watchdog Processor Driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/watchdog/zx2967_wdt.c b/drivers/watchdog/zx2967_wdt.c new file mode 100644 index 000000000..9261f7c77 --- /dev/null +++ b/drivers/watchdog/zx2967_wdt.c @@ -0,0 +1,289 @@ +/* + * watchdog driver for ZTE's zx2967 family + * + * Copyright (C) 2017 ZTE Ltd. + * + * Author: Baoyou Xie <baoyou.xie@linaro.org> + * + * License terms: GNU General Public License (GPL) version 2 + */ + +#include <linux/clk.h> +#include <linux/io.h> +#include <linux/mfd/syscon.h> +#include <linux/module.h> +#include <linux/of_address.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> +#include <linux/reset.h> +#include <linux/watchdog.h> + +#define ZX2967_WDT_CFG_REG 0x4 +#define ZX2967_WDT_LOAD_REG 0x8 +#define ZX2967_WDT_REFRESH_REG 0x18 +#define ZX2967_WDT_START_REG 0x1c + +#define ZX2967_WDT_REFRESH_MASK GENMASK(5, 0) + +#define ZX2967_WDT_CFG_DIV(n) ((((n) & 0xff) - 1) << 8) +#define ZX2967_WDT_START_EN 0x1 + +/* + * Hardware magic number. + * When watchdog reg is written, the lowest 16 bits are valid, but + * the highest 16 bits should be always this number. + */ +#define ZX2967_WDT_WRITEKEY (0x1234 << 16) +#define ZX2967_WDT_VAL_MASK GENMASK(15, 0) + +#define ZX2967_WDT_DIV_DEFAULT 16 +#define ZX2967_WDT_DEFAULT_TIMEOUT 32 +#define ZX2967_WDT_MIN_TIMEOUT 1 +#define ZX2967_WDT_MAX_TIMEOUT 524 +#define ZX2967_WDT_MAX_COUNT 0xffff + +#define ZX2967_WDT_CLK_FREQ 0x8000 + +#define ZX2967_WDT_FLAG_REBOOT_MON BIT(0) + +struct zx2967_wdt { + struct watchdog_device wdt_device; + void __iomem *reg_base; + struct clk *clock; +}; + +static inline u32 zx2967_wdt_readl(struct zx2967_wdt *wdt, u16 reg) +{ + return readl_relaxed(wdt->reg_base + reg); +} + +static inline void zx2967_wdt_writel(struct zx2967_wdt *wdt, u16 reg, u32 val) +{ + writel_relaxed(val | ZX2967_WDT_WRITEKEY, wdt->reg_base + reg); +} + +static void zx2967_wdt_refresh(struct zx2967_wdt *wdt) +{ + u32 val; + + val = zx2967_wdt_readl(wdt, ZX2967_WDT_REFRESH_REG); + /* + * Bit 4-5, 1 and 2: refresh config info + * Bit 2-3, 1 and 2: refresh counter + * Bit 0-1, 1 and 2: refresh int-value + * we shift each group value between 1 and 2 to refresh all data. + */ + val ^= ZX2967_WDT_REFRESH_MASK; + zx2967_wdt_writel(wdt, ZX2967_WDT_REFRESH_REG, + val & ZX2967_WDT_VAL_MASK); +} + +static int +zx2967_wdt_set_timeout(struct watchdog_device *wdd, unsigned int timeout) +{ + struct zx2967_wdt *wdt = watchdog_get_drvdata(wdd); + unsigned int divisor = ZX2967_WDT_DIV_DEFAULT; + u32 count; + + count = timeout * ZX2967_WDT_CLK_FREQ; + if (count > divisor * ZX2967_WDT_MAX_COUNT) + divisor = DIV_ROUND_UP(count, ZX2967_WDT_MAX_COUNT); + count = DIV_ROUND_UP(count, divisor); + zx2967_wdt_writel(wdt, ZX2967_WDT_CFG_REG, + ZX2967_WDT_CFG_DIV(divisor) & ZX2967_WDT_VAL_MASK); + zx2967_wdt_writel(wdt, ZX2967_WDT_LOAD_REG, + count & ZX2967_WDT_VAL_MASK); + zx2967_wdt_refresh(wdt); + wdd->timeout = (count * divisor) / ZX2967_WDT_CLK_FREQ; + + return 0; +} + +static void __zx2967_wdt_start(struct zx2967_wdt *wdt) +{ + u32 val; + + val = zx2967_wdt_readl(wdt, ZX2967_WDT_START_REG); + val |= ZX2967_WDT_START_EN; + zx2967_wdt_writel(wdt, ZX2967_WDT_START_REG, + val & ZX2967_WDT_VAL_MASK); +} + +static void __zx2967_wdt_stop(struct zx2967_wdt *wdt) +{ + u32 val; + + val = zx2967_wdt_readl(wdt, ZX2967_WDT_START_REG); + val &= ~ZX2967_WDT_START_EN; + zx2967_wdt_writel(wdt, ZX2967_WDT_START_REG, + val & ZX2967_WDT_VAL_MASK); +} + +static int zx2967_wdt_start(struct watchdog_device *wdd) +{ + struct zx2967_wdt *wdt = watchdog_get_drvdata(wdd); + + zx2967_wdt_set_timeout(wdd, wdd->timeout); + __zx2967_wdt_start(wdt); + + return 0; +} + +static int zx2967_wdt_stop(struct watchdog_device *wdd) +{ + struct zx2967_wdt *wdt = watchdog_get_drvdata(wdd); + + __zx2967_wdt_stop(wdt); + + return 0; +} + +static int zx2967_wdt_keepalive(struct watchdog_device *wdd) +{ + struct zx2967_wdt *wdt = watchdog_get_drvdata(wdd); + + zx2967_wdt_refresh(wdt); + + return 0; +} + +#define ZX2967_WDT_OPTIONS \ + (WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE) +static const struct watchdog_info zx2967_wdt_ident = { + .options = ZX2967_WDT_OPTIONS, + .identity = "zx2967 watchdog", +}; + +static const struct watchdog_ops zx2967_wdt_ops = { + .owner = THIS_MODULE, + .start = zx2967_wdt_start, + .stop = zx2967_wdt_stop, + .ping = zx2967_wdt_keepalive, + .set_timeout = zx2967_wdt_set_timeout, +}; + +static void zx2967_wdt_reset_sysctrl(struct device *dev) +{ + int ret; + void __iomem *regmap; + unsigned int offset, mask, config; + struct of_phandle_args out_args; + + ret = of_parse_phandle_with_fixed_args(dev->of_node, + "zte,wdt-reset-sysctrl", 3, 0, &out_args); + if (ret) + return; + + offset = out_args.args[0]; + config = out_args.args[1]; + mask = out_args.args[2]; + + regmap = syscon_node_to_regmap(out_args.np); + if (IS_ERR(regmap)) { + of_node_put(out_args.np); + return; + } + + regmap_update_bits(regmap, offset, mask, config); + of_node_put(out_args.np); +} + +static int zx2967_wdt_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct zx2967_wdt *wdt; + struct resource *base; + int ret; + struct reset_control *rstc; + + wdt = devm_kzalloc(dev, sizeof(*wdt), GFP_KERNEL); + if (!wdt) + return -ENOMEM; + + platform_set_drvdata(pdev, wdt); + + wdt->wdt_device.info = &zx2967_wdt_ident; + wdt->wdt_device.ops = &zx2967_wdt_ops; + wdt->wdt_device.timeout = ZX2967_WDT_DEFAULT_TIMEOUT; + wdt->wdt_device.max_timeout = ZX2967_WDT_MAX_TIMEOUT; + wdt->wdt_device.min_timeout = ZX2967_WDT_MIN_TIMEOUT; + wdt->wdt_device.parent = &pdev->dev; + + base = platform_get_resource(pdev, IORESOURCE_MEM, 0); + wdt->reg_base = devm_ioremap_resource(dev, base); + if (IS_ERR(wdt->reg_base)) + return PTR_ERR(wdt->reg_base); + + zx2967_wdt_reset_sysctrl(dev); + + wdt->clock = devm_clk_get(dev, NULL); + if (IS_ERR(wdt->clock)) { + dev_err(dev, "failed to find watchdog clock source\n"); + return PTR_ERR(wdt->clock); + } + + ret = clk_prepare_enable(wdt->clock); + if (ret < 0) { + dev_err(dev, "failed to enable clock\n"); + return ret; + } + clk_set_rate(wdt->clock, ZX2967_WDT_CLK_FREQ); + + rstc = devm_reset_control_get_exclusive(dev, NULL); + if (IS_ERR(rstc)) { + dev_err(dev, "failed to get rstc"); + ret = PTR_ERR(rstc); + goto err; + } + + reset_control_assert(rstc); + reset_control_deassert(rstc); + + watchdog_set_drvdata(&wdt->wdt_device, wdt); + watchdog_init_timeout(&wdt->wdt_device, + ZX2967_WDT_DEFAULT_TIMEOUT, dev); + watchdog_set_nowayout(&wdt->wdt_device, WATCHDOG_NOWAYOUT); + + ret = watchdog_register_device(&wdt->wdt_device); + if (ret) + goto err; + + dev_info(dev, "watchdog enabled (timeout=%d sec, nowayout=%d)", + wdt->wdt_device.timeout, WATCHDOG_NOWAYOUT); + + return 0; + +err: + clk_disable_unprepare(wdt->clock); + return ret; +} + +static int zx2967_wdt_remove(struct platform_device *pdev) +{ + struct zx2967_wdt *wdt = platform_get_drvdata(pdev); + + watchdog_unregister_device(&wdt->wdt_device); + clk_disable_unprepare(wdt->clock); + + return 0; +} + +static const struct of_device_id zx2967_wdt_match[] = { + { .compatible = "zte,zx296718-wdt", }, + {} +}; +MODULE_DEVICE_TABLE(of, zx2967_wdt_match); + +static struct platform_driver zx2967_wdt_driver = { + .probe = zx2967_wdt_probe, + .remove = zx2967_wdt_remove, + .driver = { + .name = "zx2967-wdt", + .of_match_table = of_match_ptr(zx2967_wdt_match), + }, +}; +module_platform_driver(zx2967_wdt_driver); + +MODULE_AUTHOR("Baoyou Xie <baoyou.xie@linaro.org>"); +MODULE_DESCRIPTION("ZTE zx2967 Watchdog Device Driver"); +MODULE_LICENSE("GPL v2"); |