diff options
Diffstat (limited to 'kernel/power/Kconfig')
| -rw-r--r-- | kernel/power/Kconfig | 300 |
1 files changed, 300 insertions, 0 deletions
diff --git a/kernel/power/Kconfig b/kernel/power/Kconfig new file mode 100644 index 000000000..3a6c2f876 --- /dev/null +++ b/kernel/power/Kconfig @@ -0,0 +1,300 @@ +config SUSPEND + bool "Suspend to RAM and standby" + depends on ARCH_SUSPEND_POSSIBLE + default y + ---help--- + Allow the system to enter sleep states in which main memory is + powered and thus its contents are preserved, such as the + suspend-to-RAM state (e.g. the ACPI S3 state). + +config SUSPEND_FREEZER + bool "Enable freezer for suspend to RAM/standby" \ + if ARCH_WANTS_FREEZER_CONTROL || BROKEN + depends on SUSPEND + default y + help + This allows you to turn off the freezer for suspend. If this is + done, no tasks are frozen for suspend to RAM/standby. + + Turning OFF this setting is NOT recommended! If in doubt, say Y. + +config SUSPEND_SKIP_SYNC + bool "Skip kernel's sys_sync() on suspend to RAM/standby" + depends on SUSPEND + depends on EXPERT + help + Skip the kernel sys_sync() before freezing user processes. + Some systems prefer not to pay this cost on every invocation + of suspend, or they are content with invoking sync() from + user-space before invoking suspend. Say Y if that's your case. + +config HIBERNATE_CALLBACKS + bool + +config HIBERNATION + bool "Hibernation (aka 'suspend to disk')" + depends on SWAP && ARCH_HIBERNATION_POSSIBLE + select HIBERNATE_CALLBACKS + select LZO_COMPRESS + select LZO_DECOMPRESS + select CRC32 + ---help--- + Enable the suspend to disk (STD) functionality, which is usually + called "hibernation" in user interfaces. STD checkpoints the + system and powers it off; and restores that checkpoint on reboot. + + You can suspend your machine with 'echo disk > /sys/power/state' + after placing resume=/dev/swappartition on the kernel command line + in your bootloader's configuration file. + + Alternatively, you can use the additional userland tools available + from <http://suspend.sf.net>. + + In principle it does not require ACPI or APM, although for example + ACPI will be used for the final steps when it is available. One + of the reasons to use software suspend is that the firmware hooks + for suspend states like suspend-to-RAM (STR) often don't work very + well with Linux. + + It creates an image which is saved in your active swap. Upon the next + boot, pass the 'resume=/dev/swappartition' argument to the kernel to + have it detect the saved image, restore memory state from it, and + continue to run as before. If you do not want the previous state to + be reloaded, then use the 'noresume' kernel command line argument. + Note, however, that fsck will be run on your filesystems and you will + need to run mkswap against the swap partition used for the suspend. + + It also works with swap files to a limited extent (for details see + <file:Documentation/power/swsusp-and-swap-files.txt>). + + Right now you may boot without resuming and resume later but in the + meantime you cannot use the swap partition(s)/file(s) involved in + suspending. Also in this case you must not use the filesystems + that were mounted before the suspend. In particular, you MUST NOT + MOUNT any journaled filesystems mounted before the suspend or they + will get corrupted in a nasty way. + + For more information take a look at <file:Documentation/power/swsusp.txt>. + +config ARCH_SAVE_PAGE_KEYS + bool + +config PM_STD_PARTITION + string "Default resume partition" + depends on HIBERNATION + default "" + ---help--- + The default resume partition is the partition that the suspend- + to-disk implementation will look for a suspended disk image. + + The partition specified here will be different for almost every user. + It should be a valid swap partition (at least for now) that is turned + on before suspending. + + The partition specified can be overridden by specifying: + + resume=/dev/<other device> + + which will set the resume partition to the device specified. + + Note there is currently not a way to specify which device to save the + suspended image to. It will simply pick the first available swap + device. + +config PM_SLEEP + def_bool y + depends on SUSPEND || HIBERNATE_CALLBACKS + select PM + select SRCU + +config PM_SLEEP_SMP + def_bool y + depends on SMP + depends on ARCH_SUSPEND_POSSIBLE || ARCH_HIBERNATION_POSSIBLE + depends on PM_SLEEP + select HOTPLUG_CPU + +config PM_AUTOSLEEP + bool "Opportunistic sleep" + depends on PM_SLEEP + default n + ---help--- + Allow the kernel to trigger a system transition into a global sleep + state automatically whenever there are no active wakeup sources. + +config PM_WAKELOCKS + bool "User space wakeup sources interface" + depends on PM_SLEEP + default n + ---help--- + Allow user space to create, activate and deactivate wakeup source + objects with the help of a sysfs-based interface. + +config PM_WAKELOCKS_LIMIT + int "Maximum number of user space wakeup sources (0 = no limit)" + range 0 100000 + default 100 + depends on PM_WAKELOCKS + +config PM_WAKELOCKS_GC + bool "Garbage collector for user space wakeup sources" + depends on PM_WAKELOCKS + default y + +config PM + bool "Device power management core functionality" + ---help--- + Enable functionality allowing I/O devices to be put into energy-saving + (low power) states, for example after a specified period of inactivity + (autosuspended), and woken up in response to a hardware-generated + wake-up event or a driver's request. + + Hardware support is generally required for this functionality to work + and the bus type drivers of the buses the devices are on are + responsible for the actual handling of device suspend requests and + wake-up events. + +config PM_DEBUG + bool "Power Management Debug Support" + depends on PM + ---help--- + This option enables various debugging support in the Power Management + code. This is helpful when debugging and reporting PM bugs, like + suspend support. + +config PM_ADVANCED_DEBUG + bool "Extra PM attributes in sysfs for low-level debugging/testing" + depends on PM_DEBUG + ---help--- + Add extra sysfs attributes allowing one to access some Power Management + fields of device objects from user space. If you are not a kernel + developer interested in debugging/testing Power Management, say "no". + +config PM_TEST_SUSPEND + bool "Test suspend/resume and wakealarm during bootup" + depends on SUSPEND && PM_DEBUG && RTC_CLASS=y + ---help--- + This option will let you suspend your machine during bootup, and + make it wake up a few seconds later using an RTC wakeup alarm. + Enable this with a kernel parameter like "test_suspend=mem". + + You probably want to have your system's RTC driver statically + linked, ensuring that it's available when this test runs. + +config PM_SLEEP_DEBUG + def_bool y + depends on PM_DEBUG && PM_SLEEP + +config DPM_WATCHDOG + bool "Device suspend/resume watchdog" + depends on PM_DEBUG && PSTORE && EXPERT + ---help--- + Sets up a watchdog timer to capture drivers that are + locked up attempting to suspend/resume a device. + A detected lockup causes system panic with message + captured in pstore device for inspection in subsequent + boot session. + +config DPM_WATCHDOG_TIMEOUT + int "Watchdog timeout in seconds" + range 1 120 + default 120 + depends on DPM_WATCHDOG + +config PM_TRACE + bool + help + This enables code to save the last PM event point across + reboot. The architecture needs to support this, x86 for + example does by saving things in the RTC, see below. + + The architecture specific code must provide the extern + functions from <linux/resume-trace.h> as well as the + <asm/resume-trace.h> header with a TRACE_RESUME() macro. + + The way the information is presented is architecture- + dependent, x86 will print the information during a + late_initcall. + +config PM_TRACE_RTC + bool "Suspend/resume event tracing" + depends on PM_SLEEP_DEBUG + depends on X86 + select PM_TRACE + ---help--- + This enables some cheesy code to save the last PM event point in the + RTC across reboots, so that you can debug a machine that just hangs + during suspend (or more commonly, during resume). + + To use this debugging feature you should attempt to suspend the + machine, reboot it and then run + + dmesg -s 1000000 | grep 'hash matches' + + CAUTION: this option will cause your machine's real-time clock to be + set to an invalid time after a resume. + +config APM_EMULATION + tristate "Advanced Power Management Emulation" + depends on SYS_SUPPORTS_APM_EMULATION + help + APM is a BIOS specification for saving power using several different + techniques. This is mostly useful for battery powered laptops with + APM compliant BIOSes. If you say Y here, the system time will be + reset after a RESUME operation, the /proc/apm device will provide + battery status information, and user-space programs will receive + notification of APM "events" (e.g. battery status change). + + In order to use APM, you will need supporting software. For location + and more information, read <file:Documentation/power/apm-acpi.txt> + and the Battery Powered Linux mini-HOWTO, available from + <http://www.tldp.org/docs.html#howto>. + + This driver does not spin down disk drives (see the hdparm(8) + manpage ("man 8 hdparm") for that), and it doesn't turn off + VESA-compliant "green" monitors. + + Generally, if you don't have a battery in your machine, there isn't + much point in using this driver and you should say N. If you get + random kernel OOPSes or reboots that don't seem to be related to + anything, try disabling/enabling this option (or disabling/enabling + APM in your BIOS). + +config PM_CLK + def_bool y + depends on PM && HAVE_CLK + +config PM_GENERIC_DOMAINS + bool + depends on PM + +config WQ_POWER_EFFICIENT_DEFAULT + bool "Enable workqueue power-efficient mode by default" + depends on PM + default n + help + Per-cpu workqueues are generally preferred because they show + better performance thanks to cache locality; unfortunately, + per-cpu workqueues tend to be more power hungry than unbound + workqueues. + + Enabling workqueue.power_efficient kernel parameter makes the + per-cpu workqueues which were observed to contribute + significantly to power consumption unbound, leading to measurably + lower power usage at the cost of small performance overhead. + + This config option determines whether workqueue.power_efficient + is enabled by default. + + If in doubt, say N. + +config PM_GENERIC_DOMAINS_SLEEP + def_bool y + depends on PM_SLEEP && PM_GENERIC_DOMAINS + +config PM_GENERIC_DOMAINS_OF + def_bool y + depends on PM_GENERIC_DOMAINS && OF + +config CPU_PM + bool |