blob: 558892bcf9b677afa35906b37929e935bf90d449 (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
|
/* SPDX-License-Identifier: GPL-2.0 */
/*
* Copyright (c) 2006-2007 Simtec Electronics
* http://armlinux.simtec.co.uk/
* Ben Dooks <ben@simtec.co.uk>
*
* S3C CPU frequency scaling support - driver and board
*/
#include <linux/cpufreq.h>
struct s3c_cpufreq_info;
struct s3c_cpufreq_board;
struct s3c_iotimings;
/**
* struct s3c_freq - frequency information (mainly for core drivers)
* @fclk: The FCLK frequency in Hz.
* @armclk: The ARMCLK frequency in Hz.
* @hclk_tns: HCLK cycle time in 10ths of nano-seconds.
* @hclk: The HCLK frequency in Hz.
* @pclk: The PCLK frequency in Hz.
*
* This contains the frequency information about the current configuration
* mainly for the core drivers to ensure we do not end up passing about
* a large number of parameters.
*
* The @hclk_tns field is a useful cache for the parts of the drivers that
* need to calculate IO timings and suchlike.
*/
struct s3c_freq {
unsigned long fclk;
unsigned long armclk;
unsigned long hclk_tns; /* in 10ths of ns */
unsigned long hclk;
unsigned long pclk;
};
/**
* struct s3c_cpufreq_freqs - s3c cpufreq notification information.
* @freqs: The cpufreq setting information.
* @old: The old clock settings.
* @new: The new clock settings.
* @pll_changing: Set if the PLL is changing.
*
* Wrapper 'struct cpufreq_freqs' so that any drivers receiving the
* notification can use this information that is not provided by just
* having the core frequency alone.
*
* The pll_changing flag is used to indicate if the PLL itself is
* being set during this change. This is important as the clocks
* will temporarily be set to the XTAL clock during this time, so
* drivers may want to close down their output during this time.
*
* Note, this is not being used by any current drivers and therefore
* may be removed in the future.
*/
struct s3c_cpufreq_freqs {
struct cpufreq_freqs freqs;
struct s3c_freq old;
struct s3c_freq new;
unsigned int pll_changing:1;
};
#define to_s3c_cpufreq(_cf) container_of(_cf, struct s3c_cpufreq_freqs, freqs)
/**
* struct s3c_clkdivs - clock divisor information
* @p_divisor: Divisor from FCLK to PCLK.
* @h_divisor: Divisor from FCLK to HCLK.
* @arm_divisor: Divisor from FCLK to ARMCLK (not all CPUs).
* @dvs: Non-zero if using DVS mode for ARMCLK.
*
* Divisor settings for the core clocks.
*/
struct s3c_clkdivs {
int p_divisor;
int h_divisor;
int arm_divisor;
unsigned char dvs;
};
#define PLLVAL(_m, _p, _s) (((_m) << 12) | ((_p) << 4) | (_s))
/**
* struct s3c_pllval - PLL value entry.
* @freq: The frequency for this entry in Hz.
* @pll_reg: The PLL register setting for this PLL value.
*/
struct s3c_pllval {
unsigned long freq;
unsigned long pll_reg;
};
/**
* struct s3c_cpufreq_board - per-board cpu frequency informatin
* @refresh: The SDRAM refresh period in nanoseconds.
* @auto_io: Set if the IO timing settings should be generated from the
* initialisation time hardware registers.
* @need_io: Set if the board has external IO on any of the chipselect
* lines that will require the hardware timing registers to be
* updated on a clock change.
* @max: The maxium frequency limits for the system. Any field that
* is left at zero will use the CPU's settings.
*
* This contains the board specific settings that affect how the CPU
* drivers chose settings. These include the memory refresh and IO
* timing information.
*
* Registration depends on the driver being used, the ARMCLK only
* implementation does not currently need this but the older style
* driver requires this to be available.
*/
struct s3c_cpufreq_board {
unsigned int refresh;
unsigned int auto_io:1; /* automatically init io timings. */
unsigned int need_io:1; /* set if needs io timing support. */
/* any non-zero field in here is taken as an upper limit. */
struct s3c_freq max; /* frequency limits */
};
/* Things depending on frequency scaling. */
#ifdef CONFIG_ARM_S3C_CPUFREQ
#define __init_or_cpufreq
#else
#define __init_or_cpufreq __init
#endif
/* Board functions */
#ifdef CONFIG_ARM_S3C_CPUFREQ
extern int s3c_cpufreq_setboard(struct s3c_cpufreq_board *board);
#else
static inline int s3c_cpufreq_setboard(struct s3c_cpufreq_board *board)
{
return 0;
}
#endif /* CONFIG_ARM_S3C_CPUFREQ */
|
