1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
|
From 4ef974ed9fe88d78a6e03689fab80c553fcf70df Mon Sep 17 00:00:00 2001
From: Haris Okanovic <haris.okanovic@ni.com>
Date: Tue, 15 Aug 2017 15:13:08 -0500
Subject: [PATCH 249/347] tpm_tis: fix stall after iowrite*()s
Origin: https://www.kernel.org/pub/linux/kernel/projects/rt/4.19/older/patches-4.19.246-rt110.tar.xz
ioread8() operations to TPM MMIO addresses can stall the cpu when
immediately following a sequence of iowrite*()'s to the same region.
For example, cyclitest measures ~400us latency spikes when a non-RT
usermode application communicates with an SPI-based TPM chip (Intel Atom
E3940 system, PREEMPT_RT_FULL kernel). The spikes are caused by a
stalling ioread8() operation following a sequence of 30+ iowrite8()s to
the same address. I believe this happens because the write sequence is
buffered (in cpu or somewhere along the bus), and gets flushed on the
first LOAD instruction (ioread*()) that follows.
The enclosed change appears to fix this issue: read the TPM chip's
access register (status code) after every iowrite*() operation to
amortize the cost of flushing data to chip across multiple instructions.
Signed-off-by: Haris Okanovic <haris.okanovic@ni.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
---
drivers/char/tpm/tpm_tis.c | 29 +++++++++++++++++++++++++++--
1 file changed, 27 insertions(+), 2 deletions(-)
diff --git a/drivers/char/tpm/tpm_tis.c b/drivers/char/tpm/tpm_tis.c
index 5a3a4f095391..5ecca6585049 100644
--- a/drivers/char/tpm/tpm_tis.c
+++ b/drivers/char/tpm/tpm_tis.c
@@ -54,6 +54,31 @@ static inline struct tpm_tis_tcg_phy *to_tpm_tis_tcg_phy(struct tpm_tis_data *da
return container_of(data, struct tpm_tis_tcg_phy, priv);
}
+#ifdef CONFIG_PREEMPT_RT_FULL
+/*
+ * Flushes previous write operations to chip so that a subsequent
+ * ioread*()s won't stall a cpu.
+ */
+static inline void tpm_tis_flush(void __iomem *iobase)
+{
+ ioread8(iobase + TPM_ACCESS(0));
+}
+#else
+#define tpm_tis_flush(iobase) do { } while (0)
+#endif
+
+static inline void tpm_tis_iowrite8(u8 b, void __iomem *iobase, u32 addr)
+{
+ iowrite8(b, iobase + addr);
+ tpm_tis_flush(iobase);
+}
+
+static inline void tpm_tis_iowrite32(u32 b, void __iomem *iobase, u32 addr)
+{
+ iowrite32(b, iobase + addr);
+ tpm_tis_flush(iobase);
+}
+
static int interrupts = -1;
module_param(interrupts, int, 0444);
MODULE_PARM_DESC(interrupts, "Enable interrupts");
@@ -173,7 +198,7 @@ static int tpm_tcg_write_bytes(struct tpm_tis_data *data, u32 addr, u16 len,
struct tpm_tis_tcg_phy *phy = to_tpm_tis_tcg_phy(data);
while (len--)
- iowrite8(*value++, phy->iobase + addr);
+ tpm_tis_iowrite8(*value++, phy->iobase, addr);
return 0;
}
@@ -200,7 +225,7 @@ static int tpm_tcg_write32(struct tpm_tis_data *data, u32 addr, u32 value)
{
struct tpm_tis_tcg_phy *phy = to_tpm_tis_tcg_phy(data);
- iowrite32(value, phy->iobase + addr);
+ tpm_tis_iowrite32(value, phy->iobase, addr);
return 0;
}
--
2.36.1
|
