Adding upstream version 4.92.upstream/4.92upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

14 files changed, 1779 insertions, 0 deletions

diff --git a/scripts/Configure b/scripts/Configure
new file mode 100755
index 0000000..6c340ee
--- /dev/null
+++ b/scripts/Configure
@@ -0,0 +1,10 @@
+#! /bin/sh -e
+
+# A script to be called to run all the other configuring scripts manually.
+
+scripts/Configure-Makefile
+scripts/Configure-os.h
+scripts/Configure-os.c
+scripts/Configure-config.h
+
+# End of Configure
diff --git a/scripts/Configure-Makefile b/scripts/Configure-Makefile
new file mode 100755
index 0000000..7e0bf38
--- /dev/null
+++ b/scripts/Configure-Makefile
@@ -0,0 +1,340 @@
+#! /bin/sh
+LC_ALL=C
+export LC_ALL
+
+# Shell script to build Makefile in a build directory. It must be called
+# from inside the directory. It does its own checking of when to rebuild; it
+# just got too horrendous to get it right in "make", because of the optionally
+# existing configuration files.
+#
+# Copyright (c) The Exim Maintainers 1995 - 2018
+
+
+# First off, get the OS type, and check that there is a make file for it.
+
+ostype=`../scripts/os-type -generic` || exit 1
+
+if [ ! -r ../OS/Makefile-$ostype ] ; then
+  echo ""
+  echo "*** Sorry - operating system $ostype is not supported"
+  echo "*** See OS/Makefile-* for supported systems" 1>&2
+  echo ""
+  exit 1
+fi
+
+# We also need the architecture type, in order to test for any architecture-
+# specific configuration files.
+
+archtype=`../scripts/arch-type` || exit 1
+
+# Now test for either the non-existence of Makefile, or for any of its
+# components being newer. Note that the "newer" script gives the right
+# answer (for our purposes) when the first file is non-existent.
+
+editme=../Local/Makefile
+rebuild=yes
+
+if [ -f Makefile ] ; then
+  rebuild=no
+  if ../scripts/newer $editme Makefile || \
+     ../scripts/newer $editme-$ostype Makefile || \
+     ../scripts/newer $editme-$archtype Makefile || \
+     ../scripts/newer $editme-$ostype-$archtype Makefile || \
+     ../scripts/newer ../scripts/Configure-Makefile Makefile || \
+     ../scripts/newer ../OS/Makefile-Base Makefile || \
+     ../scripts/newer ../OS/Makefile-Default Makefile
+  then
+    rebuild=yes
+  fi
+fi
+
+# If the "build" variable is set it means that a build name was explicitly
+# given. Arrange to pick up a build-specific configuration file.
+
+if [ "X$build" != "X" ] ; then
+  mfb=Local/Makefile-$build
+  if ../scripts/newer $editme-$build Makefile ; then
+    rebuild=yes
+  fi
+else
+  mfb=
+fi
+
+
+# If Makefile is up-to-date, no need to rebuild it.
+
+if [ $rebuild = no ] ; then
+  echo "\`Makefile' is up to date."
+  echo " "
+  exit
+fi
+
+# Makefile needs to be rebuilt in the current directory by joining
+# the generic default makefile, the OS base makefile, and then local
+# generic, OS-specific, architecture-specific, and OS+architecture-specific
+# makefiles, if they exist. These files all contain macro definitions, with
+# later definitions overriding earlier ones. Make a temporary file first, in
+# case things go wrong. A second temporary is needed for sorting out the
+# default Perl stuff. Use short macro names to save typing.
+
+mf=Makefile
+mft=$mf-t
+mftt=$mf-tt
+mftepcp=$mf-tepcp
+mftepcp2=$mf-tepcp2
+
+look_mf=lookups/Makefile
+look_mf_pre=${look_mf}.predynamic
+look_mf_post=${look_mf}.postdynamic
+
+# Ensure the temporary does not exist and start the new one by setting
+# the OSTYPE and ARCHTYPE variables.
+
+rm -f $mft $mftt $mftepcp $mftepcp2 $look_mf-t
+(echo "OSTYPE=$ostype"; echo "ARCHTYPE=$archtype"; echo "") > $mft || exit 1
+
+# Now concatenate the files to the temporary file. Copy the files using sed to
+# remove comments, blank lines, and trailing white space.
+
+# BEWARE: a tab character is needed in the sed command below. It has had
+# a nasty tendency to get lost in the past, causing a problem if a tab has
+# actually been present in one of the files. Use a variable to hold a space
+# and a tab to keep the tab in one place.
+
+st='	 '
+
+for f in OS/Makefile-Default \
+         OS/Makefile-$ostype \
+         Local/Makefile \
+         Local/Makefile-$ostype \
+         Local/Makefile-$archtype \
+         Local/Makefile-$ostype-$archtype \
+         $mfb
+do   if test -r ../$f
+     then   echo "# From $f"
+            sed "/^#/d;/^[$st]*\$/d;s/[$st]*\$//" ../$f || exit 1
+            echo "# End of $f"
+            echo ""
+     fi
+done \
+     | sed 's/^TMPDIR=/EXIM_&/' \
+     >> $mft || exit 1
+
+# handle PKG_CONFIG_PATH because we need it in our env, and we want to handle
+# wildcards; note that this logic means all setting _appends_ values, never
+# replacing; if that's a problem, we can revisit.
+sed -n "s/^[$st]*PKG_CONFIG_PATH[$st]*[+]*=[$st]*//p" $mft | \
+  sed "s/[$st]*\$//" >> $mftepcp
+if test -s ./$mftepcp
+then
+  # expand any wildcards and strip spaces, to make it a real PATH-like variable
+  ( IFS=":${IFS-$st}"; for P in `cat ./$mftepcp`; do echo "$P"; done ) | xargs | sed "s/[$st]/:/g" >./$mftepcp2
+  sed "s/^/PKG_CONFIG_PATH='/" < ./$mftepcp2 | sed "s/\$/'/" > ./$mftepcp
+  . ./$mftepcp
+  export PKG_CONFIG_PATH
+  egrep -v "^[$st]*PKG_CONFIG_PATH[$st]*=" ./$mft > ./$mftt
+  rm -f ./$mft
+  (
+    echo "# Collapsed PKG_CONFIG_PATH in build-prep:"
+    sed "s/'//g" ./$mftepcp
+    echo "# End of collapsed PKG_CONFIG_PATH"
+    echo ""
+    cat ./$mftt
+  ) > ./$mft
+  rm -f ./$mftt
+fi
+rm -f ./$mftepcp ./$mftepcp2
+
+# handle pkg-config
+# beware portability of extended regexps with sed.
+egrep "^[$st]*(AUTH|LOOKUP)_[A-Z0-9_]*[$st]*=[$st]*" $mft | \
+  sed "s/[$st]*=/='/" | \
+  sed "s/\$/'/" > $mftt
+egrep "^[$st]*((USE_(OPENSSL|GNUTLS)_PC)|SUPPORT_TLS|USE_GNUTLS|PCRE_CONFIG|AVOID_GNUTLS_PKCS11)[$st]*=[$st]*" $mft | \
+  sed "s/[$st]*=/='/" | \
+  sed "s/\$/'/" >> $mftt
+if test -s $mftt
+then
+  (
+  echo "# pkg-config fixups"
+  . ./$mftt
+  for var in `cut -d = -f 1 < $mftt`; do
+    case $var in
+
+      USE_*_PC)
+        eval "pc_value=\"\$$var\""
+        need_this=''
+        need_core=''
+        if [ ".$SUPPORT_TLS" = "." ]; then
+          # no TLS, not referencing
+          true
+        elif [ ".$var" = ".USE_GNUTLS_PC" ] && [ ".$USE_GNUTLS" != "." ]; then
+          need_this=t
+          need_core="gnutls-special"
+        elif [ ".$var" = ".USE_OPENSSL_PC" ] && [ ".$USE_GNUTLS" = "." ]; then
+          need_this=t
+          need_core=t
+        fi
+        if [ ".$need_this" != "." ]; then
+          tls_include=`pkg-config --cflags $pc_value`
+          if [ $? -ne 0 ]; then
+            echo >&2 "*** Missing pkg-config for package $pc_value (for Exim $var build option)"
+            exit 1
+          fi
+          tls_libs=`pkg-config --libs $pc_value`
+          echo "TLS_INCLUDE=$tls_include"
+          echo "TLS_LIBS=$tls_libs"
+          # With hash.h pulling crypto into the core, we need to also handle that
+          if [ ".$need_this" = ".t" ]; then
+            echo "CFLAGS += $tls_include"
+            echo "LDFLAGS += $tls_libs"
+          elif [ ".$need_this" = ".gnutls-special" ]; then
+            if pkg-config --atleast-version=2.10 gnutls ; then
+              echo "CFLAGS += $tls_include"
+              echo "LDFLAGS += $tls_libs"
+            else
+              echo "CFLAGS += `libgcrypt-config --cflags`"
+              echo "LDFLAGS += `libgcrypt-config --libs`"
+            fi
+          fi
+        fi
+        ;;
+
+      *_PC)
+        eval "pc_value=\"\$$var\""
+        base=`echo $var | sed 's/_PC$//'`
+        eval "basevalue=\"\$$base\""
+        if [ ".$basevalue" = "." ]; then
+          # not pulling in this module, _PC defined as default? Ignore
+          true
+        elif [ $basevalue = 2 ]; then
+          # module; handled in scripts/lookups-Makefile
+          true
+        else
+          # main binary
+          cflags=`pkg-config --cflags $pc_value`
+          if [ $? -ne 0 ]; then
+            echo >&2 "*** Missing pkg-config for package $pc_value (for Exim $var build option)"
+            exit 1
+          fi
+          libs=`pkg-config --libs $pc_value`
+          if [ "$var" != "${var#LOOKUP_}" ]; then
+            echo "LOOKUP_INCLUDE += $cflags"
+            echo "LOOKUP_LIBS += $libs"
+          elif [ "$var" != "${var#AUTH_}" ]; then
+            echo "CFLAGS += $cflags"
+            echo "AUTH_LIBS += $libs"
+          else
+            echo >&2 "Don't know how to handle pkg-config for $var"
+          fi
+        fi
+        ;;
+
+      PCRE_CONFIG)
+        case $PCRE_CONFIG in
+          yes|YES|y|Y)
+            cflags=`pcre-config --cflags`
+            if [ $? -ne 0 ]; then
+              echo >&2 "*** Missing pcre-config for regular expression support"
+              exit 1
+            fi
+            libs=`pcre-config --libs`
+            if [ ".$cflags" != "." ]; then
+              echo "INCLUDE += $cflags"
+            fi
+            echo "PCRE_LIBS=$libs"
+            ;;
+        esac
+        ;;
+
+      AVOID_GNUTLS_PKCS11)
+        echo "$var=yes"
+        ;;
+
+    esac
+  done
+  echo "# End of pkg-config fixups"
+  echo
+  ) >> $mft
+  subexit=$?
+  if [ $subexit -ne 0 ]; then
+    exit $subexit
+  fi
+fi
+rm -f $mftt
+
+# make the lookups Makefile with the definitions
+# the auxiliary script generates $look_mf_post from $look_mf_pre
+
+cp ../src/lookups/Makefile $look_mf_pre
+../scripts/lookups-Makefile
+
+# See if there is a definition of EXIM_PERL in what we have built so far.
+# If so, run Perl to find the default values for PERL_CC, PERL_CCOPTS,
+# and PERL_LIBS. These need to be put at the top of the Makefile, so we rename
+# what we have so far and then copy it afterwards. Use the value of PERL_COMMAND
+# if it has been defined.
+
+EXIM_PERL=`grep EXIM_PERL $mft`
+
+PERL_COMMAND=`grep PERL_COMMAND $mft | sed -e "\\$!d;s/^[$st]*PERL_COMMAND[$st]*=[$st]*//"`
+if [ "${PERL_COMMAND}" = "" ] ; then
+  PERL_COMMAND='perl'
+fi
+
+if [ "${EXIM_PERL}" != "" ] ; then
+  testperl=`$PERL_COMMAND --version`
+  if [ "$testperl" = "" ] ; then
+    echo "*** EXIM_PERL is set, but '$PERL_COMMAND --version' failed"
+    exit 1
+  fi
+
+  EXTUTILS_EMBED_NOT_INSTALLED=`$PERL_COMMAND -MExtUtils::Embed -e ";" 2>&1`
+  if [ "${EXTUTILS_EMBED_NOT_INSTALLED}" != "" ] ; then
+    echo "Please install ExtUtils::Embed for $PERL_COMMAND"
+    exit 1;
+  fi
+
+  mv $mft $mftt
+  echo "PERL_CC=`$PERL_COMMAND -MConfig -e 'print $Config{cc}'`" >>$mft
+  echo "PERL_CCOPTS=`$PERL_COMMAND -MExtUtils::Embed -e ccopts`" >>$mft
+  echo "PERL_LIBS=`$PERL_COMMAND -MExtUtils::Embed -e ldopts`" >>$mft
+  echo "" >>$mft
+  cat $mftt >> $mft
+  rm -f $mftt
+fi
+
+# Record the build variable in the Makefile.
+
+echo "build=$build" >>$mft
+echo "" >>$mft
+
+# Finally, join on the generic base make file, which contains the actual
+# rules and stuff.
+
+echo "# From ../OS/Makefile-Base" >> $mft
+cat ../OS/Makefile-Base >> $mft || exit 1
+
+# If the new makefile is the same as the existing one, say so, and just
+# update the timestamp. Otherwise remove the old and install the new.
+
+if      [ -s $mf ] && cmp -s $mft $mf && [ -s $look_mf ] && cmp -s $look_mf_post $look_mf
+then    echo ">>> rebuilt $mf unchanged"
+        echo " "
+        touch $mf || exit
+        rm -f $mft $look_mf_pre $look_mf_post
+elif    rm -f $mf $look_mf $look_mf_pre
+        mv $mft $mf
+	mv $look_mf_post $look_mf
+then    echo ">>> New $mf & $look_mf installed"
+        echo '>>> Use "make makefile" if you need to force rebuilding of the makefile'
+        echo " "
+else    echo " "
+        echo "*** Failed to install $mf - see $mft"
+	echo "    (or $look_mft)"
+        echo " "
+        exit 1;
+fi
+
+# vim: set ft=sh :
+# End of Configure-Makefile
diff --git a/scripts/Configure-config.h b/scripts/Configure-config.h
new file mode 100755
index 0000000..75d366f
--- /dev/null
+++ b/scripts/Configure-config.h
@@ -0,0 +1,60 @@
+#! /bin/sh
+
+# Build the config.h file, using the buildconfig program, first ensuring that
+# it exists.
+
+# 22-May-1996: remove the use of the "-a" flag for /bin/sh because it is not
+# implemented in the FreeBSD shell. Sigh.
+
+# 12-Mar-1997: add s/#.*$// to the sed script to allow for comments on the
+# ends of settings - someone got caught.
+
+# 18-Apr-1997: put the tab character into a variable to stop it getting
+# lost by accident (which has happened a couple of times).
+
+# 19-Jan-1998: indented settings in the makefile weren't being handled
+# correctly; added [$st]* before \\([A-Z] in the pattern, to ignore leading
+# space. Oddly, the pattern previously read ^\([A-Z which didn't seem to
+# cause a problem (but did when the new bit was put in).
+
+# 04-May-2005: if $1 is set, copy it into $MAKE, and then use $MAKE, if set,
+# instead of "make" so that if gmake is used, it is used consistently.
+
+if [ "$1" != "" ] ; then MAKE=$1 ; fi
+if [ "$MAKE" = "" ] ; then MAKE=make ; fi
+
+$MAKE buildconfig || exit 1
+
+# BEWARE: tab characters needed in the following sed command. They have had
+# a nasty tendency to get lost in the past, causing a problem if a tab has
+# actually been present in makefile. Use a variable to hold a space and a
+# tab to keep the tab in one place. This makes the sed option horrendous to
+# read, but the whole script is safer.
+
+st='	 '
+
+(sed -n \
+  "/\\\$/d;s/#.*\$//;s/^[$st]*\\([A-Z][^:!+$st]*\\)[$st]*=[$st]*\\([^$st]*\\)[$st]*\$/\\1=\\2 export \\1/p" \
+  < Makefile ; echo "./buildconfig") | /bin/sh
+
+# If buildconfig ends with an error code, it will have output an error
+# message. Ensure that a broken config.h gets deleted.
+
+if [ $? != 0 ] ; then
+  rm -f config.h
+  exit 1
+fi
+
+# Double-check that config.h is complete.
+
+if [ "`tail -1 config.h`" != "/* End of config.h */" ] ; then
+  echo "*** config.h appears to be incomplete"
+  echo "*** unexpected failure in buildconfig program"
+  exit 1
+fi
+
+echo ">>> config.h built"
+echo ""
+
+# vim: set ft=sh :
+# End of Configure-config.h
diff --git a/scripts/Configure-eximon b/scripts/Configure-eximon
new file mode 100755
index 0000000..0aca3b3
--- /dev/null
+++ b/scripts/Configure-eximon
@@ -0,0 +1,51 @@
+#! /bin/sh
+
+# Shell script to build the configurable part of the Exim monitor's start-up
+# script. This is built from various configuration files. The final part is
+# added in the Makefile, using various macros that are available at that stage.
+
+scripts=../scripts
+
+# First off, get the OS type, and check that there is a make file for it.
+
+os=`$scripts/os-type -generic` || exit 1
+
+if	test ! -r ../OS/Makefile-$os
+then    echo ""
+	echo "*** Sorry - operating system $os is not supported"
+        echo "*** See OS/Makefile-* for supported systems" 1>&2
+        echo ""
+	exit 1;
+fi
+
+# We also need the architecture type, in order to test for any architecture-
+# specific configuration files.
+
+arch=`$scripts/arch-type` || exit 1
+
+# Build a file called eximon in the current directory by joining
+# the generic default configure file, the OS base configure file, and then
+# local generic, OS-specific, architecture-specific, and OS+architecture-
+# specific configurationfiles, if they exist. These files all contain variable
+# definitions, with later definitions overriding earlier ones.
+
+echo "#!/bin/sh" > eximon
+chmod a+x eximon
+
+# Concatenate the configuration files that exist
+
+for f in OS/eximon.conf-Default \
+         OS/eximon.conf-$os \
+         Local/eximon.conf \
+         Local/eximon.conf-$os \
+         Local/eximon.conf-$arch \
+         Local/eximon.conf-$os-$arch
+do   if test -r ../$f
+     then   echo "# From $f"
+	    sed '/^#/d;/^[   ]*$/d' ../$f || exit 1
+	    echo "# End of $f"
+	    echo ""
+     fi
+done >> eximon || exit 1
+
+# End of Configure-eximon
diff --git a/scripts/Configure-os.c b/scripts/Configure-os.c
new file mode 100755
index 0000000..f00a562
--- /dev/null
+++ b/scripts/Configure-os.c
@@ -0,0 +1,30 @@
+#! /bin/sh
+
+# Shell script to build os.c. There doesn't have to be an OS-specific os.c
+# file, but if there is, it gets copied at the start of os.c. The basic src
+# copy of os.c contains generic functions, controlled in some cases by
+# macro switches so that where they are common to a number of OS, they can
+# just be switched in.
+
+scripts=../scripts
+
+# First off, get the OS type, and check that there is a make file for it.
+
+os=`$scripts/os-type -generic` || exit 1
+
+if	test ! -r ../OS/Makefile-$os
+then    echo ""
+	echo "*** Sorry - operating system $os is not supported"
+        echo "*** See OS/Makefile-* for supported systems" 1>&2
+        echo ""
+	exit 1;
+fi
+
+# Now build the file
+
+rm -f os.c
+echo '#include "exim.h"' > os.c || exit 1
+test -r ../OS/os.c-$os && cat ../OS/os.c-$os >> os.c
+echo '#include "../src/os.c"' >> os.c || exit 1
+
+# End of Configure-os.c
diff --git a/scripts/Configure-os.h b/scripts/Configure-os.h
new file mode 100755
index 0000000..ae1ecf9
--- /dev/null
+++ b/scripts/Configure-os.h
@@ -0,0 +1,51 @@
+#! /bin/sh
+
+# Shell script to create a link to the appropriate OS-specific header file.
+
+scripts=../scripts
+
+# Get the OS type, and check that there is a make file for it.
+
+os=`$scripts/os-type -generic` || exit 1
+
+if	test ! -r ../OS/Makefile-$os
+then    echo ""
+	echo "*** Sorry - operating system $os is not supported"
+        echo "*** See OS/Makefile-* for supported systems" 1>&2
+        echo ""
+	exit 1;
+fi
+
+# Ensure there is an OS-specific header file, and link it to os.h. There should
+# always be one if there is a make file for the OS, so its absence is somewhat
+# disastrous.
+
+if	test ! -r ../OS/os.h-$os
+then    echo ""
+	echo "*** Build error: OS/os.h-$os file is missing"
+        echo ""
+	exit 1;
+fi
+rm -f os.h
+
+# In order to accommodate for the fudge below, copy the file instead of
+# symlinking it. Otherwise we pollute the clean copy with the fudge.
+cp -p ../OS/os.h-$os os.h || exit 1
+
+# Special-purpose fudge for older versions of Linux (pre 2.1.15) that
+# use the structure name "options" instead of "ip_options".
+
+if [ "$os" != "Linux" -a "$os" != "Linux-libc5" ] ; then exit 0; fi
+
+grep ip_options /usr/include/linux/ip.h >/dev/null
+if [ $? = 0 ] ; then exit 0; fi
+
+cat >>os.h <<End
+
+/* Fudge added because this Linux doesn't appear to have a definition
+for ip_options in /usr/include/linux/ip.h. */
+
+#define ip_options options
+End
+
+# End of Configure-os.h
diff --git a/scripts/MakeLinks b/scripts/MakeLinks
new file mode 100755
index 0000000..f5a4e50
--- /dev/null
+++ b/scripts/MakeLinks
@@ -0,0 +1,132 @@
+#!/bin/sh
+
+# Script to build links for all the exim source files from the system-
+# specific build directory. It should be run from within that directory.
+#
+# Copyright (c) The Exim Maintainers 1995 - 2018
+
+test ! -d ../src && \
+  echo "*** $0 should be run in a system-specific subdirectory." && \
+  exit 1
+test -r version.c && \
+  echo "*** It appears that $0 has already been run." && \
+  exit 1
+if [ -r pcre/Makefile ] ; then
+  echo "*** It appears that $0 was previously interrupted."
+  echo "*** You need to remove the build directory, and then run 'make' again."
+  exit 1
+fi
+
+
+echo ""
+echo ">>> Creating links to source files..."
+
+
+# The sources for modular parts of Exim have to be linked independently
+# in their own sub-directories, since their .o files are built using
+# their own Makefile in their sub-directory.
+
+# Firstly the lookups
+mkdir lookups
+cd lookups
+# Makefile is generated
+for f in README cdb.c dbmdb.c dnsdb.c dsearch.c ibase.c ldap.h ldap.c \
+  lmdb.c lsearch.c mysql.c redis.c nis.c nisplus.c oracle.c passwd.c \
+  pgsql.c spf.c sqlite.c testdb.c whoson.c \
+  lf_functions.h lf_check_file.c lf_quote.c lf_sqlperform.c
+do
+  ln -s ../../src/lookups/$f $f
+done
+
+cd ..
+
+# Likewise for the code for the routers
+mkdir routers
+cd routers
+for f in README Makefile accept.h accept.c dnslookup.h dnslookup.c \
+  ipliteral.h ipliteral.c iplookup.h iplookup.c manualroute.h \
+  manualroute.c queryprogram.h queryprogram.c redirect.h redirect.c \
+  rf_functions.h rf_change_domain.c rf_expand_data.c rf_get_errors_address.c \
+  rf_get_munge_headers.c rf_get_transport.c rf_get_ugid.c rf_queue_add.c \
+  rf_lookup_hostlist.c rf_self_action.c rf_set_ugid.c
+do
+  ln -s ../../src/routers/$f $f
+done
+
+cd ..
+
+# Likewise for the code for the transports
+mkdir transports
+cd transports
+for f in README Makefile appendfile.h appendfile.c autoreply.h \
+  autoreply.c lmtp.h lmtp.c pipe.h pipe.c queuefile.c queuefile.h \
+  smtp.h smtp.c smtp_socks.c tf_maildir.c tf_maildir.h
+do
+  ln -s ../../src/transports/$f $f
+done
+
+cd ..
+
+# Likewise for the code for the authorization functions
+mkdir auths
+cd auths
+for f in README Makefile call_pam.c call_pwcheck.c \
+  call_radius.c check_serv_cond.c cyrus_sasl.c cyrus_sasl.h gsasl_exim.c \
+  gsasl_exim.h get_data.c get_no64_data.c heimdal_gssapi.c heimdal_gssapi.h \
+  md5.c xtextencode.c xtextdecode.c cram_md5.c cram_md5.h plaintext.c plaintext.h \
+  pwcheck.c pwcheck.h auth-spa.c auth-spa.h dovecot.c dovecot.h sha1.c spa.c \
+  spa.h tls.c tls.h
+do
+  ln -s ../../src/auths/$f $f
+done
+cd ..
+
+# Likewise for the code for the PDKIM library
+mkdir pdkim
+cd pdkim
+for f in README Makefile crypt_ver.h pdkim.c \
+  pdkim.h hash.c hash.h signing.c signing.h blob.h
+do
+  ln -s ../../src/pdkim/$f $f
+done
+cd ..
+
+# The basic source files for Exim and utilities. NB local_scan.h gets linked,
+# but local_scan.c does not, because its location is taken from the build-time
+# configuration. Likewise for the os.c file, which gets build dynamically.
+
+for f in blob.h dbfunctions.h dbstuff.h exim.h functions.h globals.h \
+  hash.h local_scan.h \
+  macros.h mytypes.h osfunctions.h store.h structs.h lookupapi.h sha_ver.h \
+  \
+  acl.c buildconfig.c base64.c child.c crypt16.c daemon.c dbfn.c debug.c deliver.c \
+  directory.c dns.c drtables.c dummies.c enq.c exim.c exim_dbmbuild.c \
+  exim_dbutil.c exim_lock.c expand.c filter.c filtertest.c globals.c \
+  hash.c header.c host.c ip.c log.c lss.c match.c moan.c parse.c perl.c queue.c \
+  rda.c readconf.c receive.c retry.c rewrite.c rfc2047.c route.c search.c \
+  setenv.c environment.c \
+  sieve.c smtp_in.c smtp_out.c spool_in.c spool_out.c std-crypto.c store.c \
+  string.c tls.c tlscert-gnu.c tlscert-openssl.c tls-gnu.c tls-openssl.c \
+  tod.c transport.c tree.c verify.c version.c \
+  dkim.c dkim.h dkim_transport.c dmarc.c dmarc.h \
+  valgrind.h memcheck.h \
+  macro_predef.c macro_predef.h
+do
+  ln -s ../src/$f $f
+done
+
+# WITH_CONTENT_SCAN
+for f in  spam.c spam.h spool_mbox.c regex.c mime.c mime.h malware.c
+do
+  ln -s ../src/$f $f
+done
+
+# EXPERIMENTAL_*
+for f in  arc.c bmi_spam.c bmi_spam.h dcc.c dcc.h dane.c dane-openssl.c \
+  danessl.h imap_utf7.c spf.c spf.h srs.c srs.h utf8.c
+do
+  ln -s ../src/$f $f
+done
+
+
+# End of MakeLinks
diff --git a/scripts/arch-type b/scripts/arch-type
new file mode 100755
index 0000000..f5fe8eb
--- /dev/null
+++ b/scripts/arch-type
@@ -0,0 +1,74 @@
+#! /bin/sh
+
+# Shell script to determine the architecture type.
+
+# If EXIM_ARCHTYPE is set, use it. This allows a manual override.
+
+case "$EXIM_ARCHTYPE" in ?*) arch="$EXIM_ARCHTYPE";; esac
+
+# Otherwise, try to get a value from the uname command. When uname -p gives
+# "unknown" or something containing spaces, try -m.
+
+case "$arch" in '') arch=`uname -p 2> /dev/null`;; esac
+case "$arch" in ''|unknown|*\ *) arch=`uname -m 2> /dev/null`;; esac
+
+# Otherwise, see if ARCHTYPE is set. Some versions of NetBSD set it to
+# "NetBSD", which isn't very helpful. However, we expect uname to have
+# worked under NetBSD, so this shouldn't matter.
+
+case "$arch" in '') arch="$ARCHTYPE";; esac
+
+# Otherwise, as a cheap test, try shell's HOSTTYPE, but as tcsh sometimes sets
+# it to the OS name, ignore it if running with tcsh.
+
+case "$SHELL" in ?*tcsh) HOSTTYPE="";; esac
+
+case "$arch++$HOSTTYPE" in
+++?*) arch="$HOSTTYPE"
+      # Fix up disagreements :-)
+      case "$arch" in
+      sun4*)    arch=sparc;;
+
+# Comment by Vadim Vygonets:
+# Maybe sun4/sun4c/sun4m and sun4u (or whatever else they call the
+# Ultras, sparc64?) should be different platforms.  Maybe not.
+# NetBSD and OpenBSD (the latter is not supported) think about them
+# as different platforms.  Solaris doesn't seem to.  I have no idea
+# about Linux.
+
+      sgi)      arch=mips;;
+      MIPSEL)   arch=mips;;
+      esac
+      ;;
+esac
+
+# Give up if failed.
+
+case "$arch" in
+'') echo "" 1>&2
+    echo "*** Failed to determine the machine architecture type." 1>&2
+    echo "" 1>&2
+    echo UnKnown
+    exit 1;;
+esac
+
+# Get rid of any gash characters in the string
+
+arch=`echo $arch | sed 's,[^-+_.a-zA-Z0-9],,g'`
+
+# Some further fixups needed
+
+case "$arch" in
+i[3456]86*)         arch=i386;;
+RISC)               arch=mips;;     # MIPS Ultrix
+IP22)               arch=mips;;
+9000[78][0-9][0-9]) arch=hp9000s700;;
+9000[34][0-9][0-9]) arch=hp9000s400;;
+3050R)              arch=3050;;
+esac
+
+# OK, the script seems to have worked. Pass the value back.
+
+echo "$arch"
+
+# End of arch-type
diff --git a/scripts/exim_install b/scripts/exim_install
new file mode 100755
index 0000000..1e88050
--- /dev/null
+++ b/scripts/exim_install
@@ -0,0 +1,472 @@
+#! /bin/sh
+
+# Script to install Exim binaries in BIN_DIRECTORY, which is defined in
+# the local Makefile. It expects to be run in a build directory. It needs
+# to be run as root in order to make exim setuid to root. If exim runs setuid
+# to (e.g.) exim, this script should be run as that user or root.
+
+# This script also installs a default configuration file in CONFIGURE_FILE
+# if there is no configuration file there, but only if CONFIGURE_FILE specifies
+# single file. If it specifies a list, no action is taken.
+
+# If a default configuration file is installed, the existence of the system
+# aliases file is tested. A default, containing only comments, is installed if
+# necessary.
+
+# If INFO_DIRECTORY is defined in any of the local Makefiles, and the Exim doc
+# directory contains the Texinfo documentation, this script also installs a
+# the info files in INFO_DIRECTORY.
+
+# If DESTDIR is defined, all file paths are prefixed with ${DESTDIR}, with the
+# sole exception of the reference to the system aliases file in the default
+# configuration, because it is assumed that Exim is not actually going to be
+# run from this position. For backward compatibility, if DESTDIR is not
+# defined, ROOT is used instead.
+
+# The script can be made to output what it would do, without actually doing
+# anything, by giving it the option "-n" (cf make). Arguments are the names
+# of things to install. No arguments installs everything.
+
+do_chown=yes
+do_symlink=yes
+
+while [ $# -gt 0 ] ; do
+  case "$1" in
+    -n)
+      real="true || "
+      ver="verification "
+      com=": "
+      echo $com ""
+      echo $com "*** Verification mode only: no commands will actually be obeyed"
+      echo $com "*** You can cut and paste the bits you want to a shell, etc"
+      echo $com ""
+      echo cd `pwd`
+      ;;
+
+    -no_chown)
+      do_chown=no
+      ;;
+
+    -no_symlink)
+      do_symlink=no
+      ;;
+
+    *)
+      break
+      ;;
+  esac
+  shift
+done
+
+# Get the values of BIN_DIRECTORY, CONFIGURE_FILE, INFO_DIRECTORY, NO_SYMLINK,
+# SYSTEM_ALIASES_FILE, and EXE from the global Makefile (in the build
+# directory). EXE is empty except in the Cygwin environment. In each case, keep
+# the latest definition, thus respecting the Makefiles precedence. The sed
+# sequences here are messy, but have to be very "basic" in order to work on
+# Solaris, where the regular expressions in sed are primitive indeed. Modify at
+# your peril.
+
+BIN_DIRECTORY=`sed -n   -e '/^ *BIN_DIRECTORY *=/{s/^[^=]*= *//; s/ \{1,\}#.*//;s/ *$//;h;}' -e '${g;p;}' Makefile`
+CONFIGURE_FILE=`sed -n -e '/^ *CONFIGURE_FILE *=/{s/^[^=]*= *//; s/ \{1,\}#.*//;s/ *$//;h;}' -e '${g;p;}' Makefile`
+INFO_DIRECTORY=`sed -n -e '/^ *INFO_DIRECTORY *=/{s/^[^=]*= *//; s/ \{1,\}#.*//;s/ *$//;h;}' -e '${g;p;}' Makefile`
+NO_SYMLINK=`sed -n         -e '/^ *NO_SYMLINK *=/{s/^[^=]*= *//; s/ \{1,\}#.*//;s/ *$//;h;}' -e '${g;p;}' Makefile`
+
+CHOWN=`sed -n           -e '/^ *CHOWN_COMMAND *=/{s/^[^=]*= *//; s/ \{1,\}#.*//;s/ *$//;h;}' -e '${g;p;}' Makefile`
+MV=`sed -n                 -e '/^ *MV_COMMAND *=/{s/^[^=]*= *//; s/ \{1,\}#.*//;s/ *$//;h;}' -e '${g;p;}' Makefile`
+
+SYSTEM_ALIASES_FILE=`sed -n -e '/^ *SYSTEM_ALIASES_FILE *=/{s/^[^=]*= *//; s/ \{1,\}#.*//;s/ *$//;h;}' -e '${g;p;}' Makefile`
+EXE=`sed -n                                 -e '/^ *EXE *=/{s/^[^=]*= *//; s/ \{1,\}#.*//;s/ *$//;h;}' -e '${g;p;}' Makefile`
+
+# Set a default for SYSTEM_ALIASES_FILE
+
+if [ "${SYSTEM_ALIASES_FILE}" = "" ] ; then
+  SYSTEM_ALIASES_FILE=/etc/aliases
+fi
+
+# Allow INST_xx to over-ride xx
+case "$INST_BIN_DIRECTORY"       in ?*) BIN_DIRECTORY="$INST_BIN_DIRECTORY";; esac
+case "$INST_CONFIGURE_FILE"      in ?*) CONFIGURE_FILE="$INST_CONFIGURE_FILE";; esac
+case "$INST_INFO_DIRECTORY"      in ?*) INFO_DIRECTORY="$INST_INFO_DIRECTORY";; esac
+case "$INST_SYSTEM_ALIASES_FILE" in ?*) SYSTEM_ALIASES_FILE="$INST_SYSTEM_ALIASES_FILE";; esac
+
+case "$INST_CHOWN"               in ?*) CHOWN="$INST_CHOWN";; esac
+case "$INST_MV"                  in ?*) MV="$INST_MV";; esac
+
+case "$INST_UID"     in '') INST_UID=root;;    *) INST_UID="$INST_UID";; esac
+case "$INST_CP"      in '') CP=cp;;            *) CP="$INST_CP";; esac
+case "$INST_LN"      in '') LN=ln;;            *) LN="$INST_LN";; esac
+case "$INST_CHMOD"   in '') CHMOD=chmod;;      *) CHMOD="$INST_CHMOD";; esac
+case "$INST_DIRNAME" in '') DIRNAME=dirname;;  *) DIRNAME="$INST_DIRNAME";; esac
+case "$INST_MKDIR"   in '') MKDIR=mkdir;;      *) MKDIR="$INST_MKDIR";; esac
+
+# Allow the user to over-ride xx
+case "$inst_dest"    in ?*) BIN_DIRECTORY="$inst_dest";; esac
+case "$inst_conf"    in ?*) CONFIGURE_FILE="$inst_conf";; esac
+case "$inst_info"    in ?*) INFO_DIRECTORY="$inst_info";; esac
+case "$inst_aliases" in ?*) SYSTEM_ALIASES_FILE="$inst_aliases";; esac
+
+# Insert ${DESTDIR} at the start of all paths so that the whole thing can be
+# installed under a different file root. For backwards compatibility, use
+# ${ROOT} if ${DESTDIR} is not set. However, we need to save the value of
+# the real system aliases file, and use that in the default configuration.
+
+ACTUAL_SYSTEM_ALIASES_FILE=${SYSTEM_ALIASES_FILE}
+DESTDIR=${DESTDIR:-${ROOT}}
+
+BIN_DIRECTORY=${DESTDIR}${BIN_DIRECTORY}
+CONFIGURE_FILE=${DESTDIR}${CONFIGURE_FILE}
+SYSTEM_ALIASES_FILE=${DESTDIR}${SYSTEM_ALIASES_FILE}
+
+if [ "${INFO_DIRECTORY}" != "" ] ; then
+  INFO_DIRECTORY=${DESTDIR}${INFO_DIRECTORY}
+fi
+
+# Overrides of other things
+case "$inst_uid"     in ?*) INST_UID="$inst_uid";; esac
+case "$inst_cp"      in ?*) CP="$inst_cp";; esac
+case "$inst_mv"      in ?*) MV="$inst_mv";; esac
+case "$inst_ln"      in ?*) LN="$inst_ln";; esac
+case "$inst_chown"   in ?*) CHOWN="$inst_chown";; esac
+case "$inst_chmod"   in ?*) CHMOD="$inst_chmod";; esac
+case "$inst_dirname" in ?*) DIRNAME="$inst_dirname";; esac
+case "$inst_mkdir"   in ?*) MKDIR="$inst_mkdir";; esac
+
+# chown is a special case; in at least one OS it is in /usr/etc instead
+# of in /usr/bin, and therefore not likely to be on the path. Another OS
+# has it in /usr/sbin. This fudge tries to cope with these variations.
+
+# Otherwise, and for other commands, we assume that the normal PATH will
+# give access to where they are on your operating system (normally /usr/bin
+# or /bin).
+
+if [ "${CHOWN}" = "chown" -a -x /usr/sbin/chown ] ; then
+  CHOWN=/usr/sbin/chown
+fi
+
+if [ "${CHOWN}" = "chown" -a ! -f /usr/bin/chown -a -f /usr/etc/chown ] ; then
+  CHOWN=/usr/etc/chown
+fi
+
+# The values of CHOWN and MV taken from the Makefile are sometimes set to
+# "look_for_it", which causes a search of the usual suspects. This code is
+# similar to that in exicyclog, but has to be fudged for upper/lower case
+# distinctions.
+
+for cmd in CHOWN MV ; do
+  eval "oldcmd=\$$cmd"
+  if [ "$oldcmd" != "look_for_it" ] ; then continue ; fi
+  if [ "$cmd" = "CHOWN" ] ; then cmdlc="chown" ; fi
+  if [ "$cmd" = "MV" ] ; then cmdlc="mv" ; fi
+  newcmd=$cmdlc
+  for dir in /bin /usr/bin /usr/sbin /usr/etc ; do
+    if [ -f $dir/$cmdlc ] ; then
+      newcmd=$dir/$cmdlc
+      break
+    fi
+  done
+  eval $cmd=$newcmd
+done
+
+# See if the exim monitor has been built
+
+if [ -f eximon -a -f eximon.bin ]; then
+  exim_monitor="eximon eximon.bin"
+fi
+
+# If bin directory doesn't exist, try to create it
+
+if [ ! -d "${BIN_DIRECTORY}" ]; then
+  echo mkdir -p ${BIN_DIRECTORY}
+  ${real} mkdir -p ${BIN_DIRECTORY}
+  if [ $? -ne 0 ]; then
+    echo $com ""
+    echo $com "*** Exim installation ${ver}failed ***"
+    exit 1
+  else
+    ${real} echo $com ${BIN_DIRECTORY} created
+  fi
+fi
+
+# If no arguments, install everything
+
+if [ $# -gt 0 ]; then
+  set $@
+else
+  set exim${EXE} ${exim_monitor} exim_dumpdb${EXE} exim_fixdb${EXE} \
+      exim_tidydb${EXE} exinext exiwhat exim_dbmbuild${EXE} exicyclog \
+      exigrep eximstats exipick exiqgrep exiqsumm exim_lock${EXE} \
+      exim_checkaccess
+fi
+
+echo $com ""
+echo $com Installation directory is ${BIN_DIRECTORY}
+echo $com ""
+
+while [ $# -gt 0 ]; do
+  name=$1
+  shift
+
+  if [ ! -s ${name} ]; then
+    echo $com ""
+    echo $com "*** `pwd`/${name} does not exist or is empty"
+    echo $com "*** Have you built Exim successfully?"
+    echo $com "*** Exim installation ${ver}failed ***"
+    exit 1
+  fi
+
+  # The exim binary is handled specially
+
+  if [ $name = exim${EXE} ]; then
+    exim="./exim -bV -C /dev/null"
+    version=exim-`$exim 2>/dev/null | \
+      awk '/Exim version/ { OFS=""; print $3,"-",substr($4,2,length($4)-1) }'`${EXE}
+
+    if [ "${version}" = "exim-${EXE}" ]; then
+      echo $com ""
+      echo $com "*** Could not run $exim to find version number ***"
+      echo $com "*** Exim installation ${ver}failed ***"
+      $exim
+      exit 1
+    fi
+
+    # Do something only if newer than existing file, or no existing file
+
+    if ../scripts/newer ${name} ${BIN_DIRECTORY}/${version}; then
+      echo ${CP} ${name} ${BIN_DIRECTORY}/${version}
+      ${real} ${CP} ${name} ${BIN_DIRECTORY}/${version}
+      if [ $? -ne 0 ]; then
+        echo $com ""
+        echo $com "*** Exim installation ${ver}failed ***"
+        exit 1
+      fi
+
+      # After copy, set ownership and permissions, unless disabled
+
+      if [ "$do_chown" != "no" ]; then
+        echo ${CHOWN} ${INST_UID} ${BIN_DIRECTORY}/${version}
+        ${real} ${CHOWN} ${INST_UID} ${BIN_DIRECTORY}/${version}
+        if [ $? -ne 0 ]; then
+          echo $com ""
+          echo $com "*** You must be ${INST_UID} to install exim ***"
+          exit 1
+        fi
+        echo ${CHMOD} a+x ${BIN_DIRECTORY}/${version}
+        ${real} ${CHMOD} a+x ${BIN_DIRECTORY}/${version}
+        if [ $? -ne 0 ]; then
+          echo $com ""
+          echo $com "*** Exim installation ${ver}failed ***"
+          exit 1
+        fi
+        echo ${CHMOD} u+s ${BIN_DIRECTORY}/${version}
+        ${real} ${CHMOD} u+s ${BIN_DIRECTORY}/${version}
+        if [ $? -ne 0 ]; then
+          echo $com ""
+          echo $com "*** Exim installation ${ver}failed ***"
+          exit 1
+        fi
+      else
+        echo $com "$CHOWN $INST_UID omitted: -no_chown was specified"
+        echo $com "$CHMOD u+s omitted: -no_chown was specified"
+      fi
+
+      # Now sort out the "exim" alias, unless NO_SYMLINK is set.
+
+      if [ "X$NO_SYMLINK" = "X" ] && [ "$do_symlink" != "no" ] ; then
+
+        #  First check whether "exim" exists in the directory.
+        if [ -f ${BIN_DIRECTORY}/exim ]; then
+
+          # If it's not a symbolic link, make a copy with the old version number
+          if [ `ls -l ${BIN_DIRECTORY}/exim | cut -c1-1` != 'l' ]; then
+            oldversion=exim-`${BIN_DIRECTORY}/exim -bV -C /dev/null | \
+              awk '/Exim version/ { OFS=""; print $3,"-",substr($4,2,length($4)-1) }'`${EXE}
+            if [ "${version}" = "${oldversion}" ] ; then
+              echo $com ""
+              echo $com "*** Existing file called exim has the same version and compile number ***"
+              echo $com "*** Exim installation ${ver}failed ***"
+              exit 1
+            fi
+            echo ${CP} ${BIN_DIRECTORY}/exim ${BIN_DIRECTORY}/${oldversion}
+            ${real} ${CP} ${BIN_DIRECTORY}/exim ${BIN_DIRECTORY}/${oldversion}
+            if [ $? -ne 0 ]; then
+              echo $com ""
+              echo $com "*** Exim installation ${ver}failed ***"
+              exit 1
+            fi
+          fi
+
+          # Now we can move the name "exim" to be a symbolic link to the new
+          # version, atomically.
+
+          echo \(cd ${BIN_DIRECTORY}\; ${LN} -s ${version} temporary_exim\)
+          (${real} cd ${BIN_DIRECTORY}; ${real} ${LN} -s ${version} temporary_exim)
+          if [ $? -ne 0 ]; then
+            echo $com ""
+            echo $com "*** Exim installation ${ver}failed ***"
+            exit 1
+          fi
+
+          echo ${MV} -f ${BIN_DIRECTORY}/temporary_exim ${BIN_DIRECTORY}/exim
+          ${real} ${MV} -f ${BIN_DIRECTORY}/temporary_exim ${BIN_DIRECTORY}/exim
+          if [ $? -ne 0 ]; then
+            echo $com ""
+            echo $com "*** Exim installation ${ver}failed ***"
+            exit 1
+          fi
+
+        # If "exim" does not already exist just create a symbolic link.
+
+        else
+          echo \(cd ${BIN_DIRECTORY}\; ${LN} -s ${version} exim\)
+          (${real} cd ${BIN_DIRECTORY}; ${real} ${LN} -s ${version} exim)
+          if [ $? -ne 0 ]; then
+            echo $com ""
+            echo $com "*** Exim installation ${ver}failed ***"
+            exit 1
+          fi
+        fi
+
+      else
+        echo $com "creation of symlink omitted"
+        if [ "X$NO_SYMLINK" != "X" ] ; then
+          echo $com "(NO_SYMLINK is specified in Local/Makefile)"
+        else
+          echo $com "(-no_symlink was specified)"
+        fi
+      fi
+
+    # New binary is not newer than the installed file
+
+    else
+      echo $com ${name} is not newer than ${BIN_DIRECTORY}/${version}
+    fi
+
+  # Handle everything other than the exim binary itself
+
+  else
+    if ../scripts/newer ${name} ${BIN_DIRECTORY}/${name}; then
+      if [ -f ${BIN_DIRECTORY}/${name} ]; then
+        echo ${CP} ${BIN_DIRECTORY}/${name} ${BIN_DIRECTORY}/${name}.O
+        ${real} ${CP} ${BIN_DIRECTORY}/${name} ${BIN_DIRECTORY}/${name}.O
+        if [ $? -ne 0 ]; then
+          echo $com ""
+          echo $com "*** Exim installation ${ver}failed ***"
+          exit 1
+        fi
+      fi
+      echo ${CP} ${name} ${BIN_DIRECTORY}
+      ${real} ${CP} ${name} ${BIN_DIRECTORY}
+      if [ $? -ne 0 ]; then
+        echo $com ""
+        echo $com "*** Exim installation ${ver}failed ***"
+        exit 1
+      fi
+    else
+      echo $com ${name} is not newer than ${BIN_DIRECTORY}/${name}
+    fi
+  fi
+
+done
+
+
+
+# If there is no configuration file, install the default, modifying it to refer
+# to the configured system aliases file. If there is no setting for
+# SYSTEM_ALIASES_FILE, use the traditional /etc/aliases. If the file does not
+# exist, install a default (dummy) for that too.
+
+# However, if CONFIGURE_FILE specifies a list of files, skip this code.
+
+echo $com ""
+
+if [ `expr -- "${CONFIGURE_FILE}" : ".*:"` -ne 0 ] ; then
+  echo $com Runtime configuration is specified as the following list:
+  echo $com ' ' ${CONFIGURE_FILE}
+  echo $com Therefore, skipping automatic installation.
+
+elif [ ! -f ${CONFIGURE_FILE} ]; then
+  echo $com Installing default configuration in ${CONFIGURE_FILE}
+  echo $com because there is no existing configuration file.
+  if [ "${SYSTEM_ALIASES_FILE}" = "" ] ; then
+    SYSTEM_ALIASES_FILE=/etc/aliases
+    echo $com This configuration has system aliases in ${SYSTEM_ALIASES_FILE}.
+  fi
+
+  echo ${MKDIR} -p `${DIRNAME} ${CONFIGURE_FILE}`
+  ${real} ${MKDIR} -p `${DIRNAME} ${CONFIGURE_FILE}`
+
+  echo sed -e '\\'
+  echo "  \"/SYSTEM_ALIASES_FILE/ s'SYSTEM_ALIASES_FILE'${ACTUAL_SYSTEM_ALIASES_FILE}'\"" '\\'
+  echo "  ../src/configure.default > \${CONFIGURE_FILE}"
+
+  # I can't find a way of writing this using the ${real} feature because
+  # it seems that the output redirection always happens, even when -n was
+  # specified. So control it the hard way.
+
+  if [ "$real" = "" ] ; then
+    sed -e \
+      "/SYSTEM_ALIASES_FILE/ s'SYSTEM_ALIASES_FILE'${ACTUAL_SYSTEM_ALIASES_FILE}'" \
+      ../src/configure.default > ${CONFIGURE_FILE}
+  else
+    true
+  fi
+
+  if [ $? -ne 0 ]; then
+    echo $com ""
+    echo $com "*** Exim installation ${ver}failed ***"
+    exit 1
+  fi
+  if [ ! -f ${SYSTEM_ALIASES_FILE} ]; then
+    echo $com '****'
+    echo $com Installing a dummy ${SYSTEM_ALIASES_FILE} file because you do not have
+    echo $com one, and the default configuration requires it. You should
+    echo $com edit ${SYSTEM_ALIASES_FILE} and at least create an alias for postmaster.
+    echo $com '***'
+    echo ${CP} ../src/aliases.default ${SYSTEM_ALIASES_FILE}
+    ${real} ${CP} ../src/aliases.default ${SYSTEM_ALIASES_FILE}
+  fi
+
+else
+  echo $com Configuration file ${CONFIGURE_FILE} already exists
+fi
+
+# Install info files if the directory is defined and the Texinfo
+# source documentation is present.
+
+if [ "${INFO_DIRECTORY}" != "" -a -f ../doc/spec.texinfo ] ; then
+  echo $com ""
+  if [ ! -d "${INFO_DIRECTORY}" ] ; then
+    echo mkdir -p ${INFO_DIRECTORY}
+    ${real} mkdir -p ${INFO_DIRECTORY}
+    if [ $? -ne 0 ]; then
+      echo $com ""
+      echo $com "*** Exim installation ${ver}failed ***"
+      exit 1
+    else
+      echo $com ${INFO_DIRECTORY} created
+    fi
+  fi
+
+  echo $com Info installation directory is ${INFO_DIRECTORY}
+  echo $com ""
+
+  ${real} makeinfo --no-split --output exim.info ../doc/spec.texinfo
+  echo ${CP} exim.info ${INFO_DIRECTORY}
+  ${real} ${CP} exim.info ${INFO_DIRECTORY}
+  ${real} install-info --section="Exim" \
+      --entry "* User guide: (exim).           Exim manual" \
+      ${INFO_DIRECTORY}/exim.info ${INFO_DIRECTORY}/dir
+  ${real} makeinfo --no-split --output exim_filter.info ../doc/filter.texinfo
+  echo ${CP} exim_filter.info ${INFO_DIRECTORY}
+  ${real} ${CP} exim_filter.info ${INFO_DIRECTORY}
+  ${real} install-info --section="Exim" \
+      --entry "* Filtering: (exim_filter).     Filtering mail with Exim" \
+      ${INFO_DIRECTORY}/exim_filter.info ${INFO_DIRECTORY}/dir
+fi
+
+# Everything OK
+
+echo $com ""
+echo $com Exim installation ${ver}complete
+
+# End of exim_install
diff --git a/scripts/lookups-Makefile b/scripts/lookups-Makefile
new file mode 100755
index 0000000..db2d184
--- /dev/null
+++ b/scripts/lookups-Makefile
@@ -0,0 +1,194 @@
+#! /bin/sh
+
+# We turn the configure-built build-$foo/lookups/Makefile.predynamic into Makefile
+
+# We always re-exec ourselves at least once, because it's the cleanest and
+# most portable way to turn on various features we expect of POSIX sh.
+if [ -z "$EXIM_LOOKUP_MAKEFILE_ADJUSTED" ]
+then
+  SHELL=/bin/sh
+  EXIM_LOOKUP_MAKEFILE_ADJUSTED=yes
+  export EXIM_LOOKUP_MAKEFILE_ADJUSTED
+
+  # Solaris sh and tr are problematic until we get xpg4 variants
+  if [ -x /usr/xpg4/bin/sh ]
+  then
+    PATH="/usr/xpg4/bin:$PATH"
+    export PATH
+    SHELL=/usr/xpg4/bin/sh
+    export SHELL
+  fi
+
+  # IRIX uses /bin/ksh for sh but in a compatibility mode unless $_XPG == 1,
+  # where said compatibility mode disables $(...)
+  _XPG=1
+  export _XPG
+
+  # We need the _right_ tr, so must do that first; but if a shell which
+  # we're more confident is sane is available, let's try that.  Mostly,
+  # the problem is that "local" is not actually in "the" standard, it's
+  # just in every not-insane shell.  Though arguably, there are no shells
+  # with POSIX-ish syntax which qualify as "not insane".
+  for b in /bin/dash /bin/bash /usr/local/bin/bash
+  do
+    if [ -x "$b" ]
+    then
+      SHELL="$b"
+      break
+    fi
+  done
+  # if we get a report of a system with zsh but not bash, we can add that
+  # to the list, but be sure to enable sh_word_split in that case.
+
+  exec "$SHELL" "$0" "$@"
+fi
+
+input=lookups/Makefile.predynamic
+target=lookups/Makefile.postdynamic
+defs_source=Makefile-t
+tag_marker='MAGIC-TAG-MODS-OBJ-RULES-GO-HERE'
+
+tab='	'
+
+# We rely on tr(1) for translating case below.  Some people export
+# values of LC_CTYPE and LC_COLLATE which apparently break our assumptions.
+# We're a script expecting certain output based on known inputs and not dealing
+# with UTF8, so we should be safe doingthis:
+LC_ALL=C
+export LC_ALL
+
+if [ -f "$defs_source" ]
+then
+  :
+  # we are happy
+else
+  echo >&2 "$0: ERROR: MISSING FILE '${defs_source}'"
+  echo >&2 "$0: SHOULD HAVE BEEN CALLED FROM scripts/Configure-Makefile"
+  exit 1
+fi
+
+# nb: do not permit leading whitespace for this, as CFLAGS_DYNAMIC is exported
+# to the lookups subdir via a line with leading whitespace which otherwise
+# matches
+if grep -q "^CFLAGS_DYNAMIC[ $tab?:]*=" "$defs_source"
+then
+  # we have a definition, we're good to go
+  echo >&2 ">>> Creating lookups/Makefile for building dynamic modules"
+  enable_dynamic=yes
+else
+  echo >&2 ">>> Creating lookups/Makefile without dynamic module support"
+  enable_dynamic=''
+  # We always do something now, since there should always be a lookup,
+  # and now we need to run in order to put the OBJ=$(OBJ)+ rules in.  So we
+  # continue on.
+fi
+
+# For the want_ checks, we need to let the user override values from the make
+# command-line, not just check the Makefile.
+
+want_dynamic() {
+  local dyn_name="$1"
+  local re="LOOKUP_${dyn_name}[ $tab]*=[ $tab]*2"
+  env | grep -q "^$re"
+  if [ $? -eq 0 ]; then return 0; fi
+  grep -q "^[ $tab]*$re" "$defs_source"
+}
+
+want_at_all() {
+  local want_name="$1"
+  local re="LOOKUP_${want_name}[ $tab]*=[ $tab]*."
+  env | grep -q "^$re"
+  if [ $? -eq 0 ]; then return 0; fi
+  grep -q "^[ $tab]*$re" "$defs_source"
+}
+
+# Adapted want_at_all above to work for EXPERIMENTAL features
+want_experimental() {
+  local want_name="$1"
+  local re="EXPERIMENTAL_${want_name}[ $tab]*=[ $tab]*."
+  env | grep -q "^$re"
+  if [ $? -eq 0 ]; then return 0; fi
+  grep -q "^[ $tab]*$re" "$defs_source"
+}
+
+# The values of these variables will be emitted into the Makefile.
+
+MODS=""
+OBJ=""
+
+emit_module_rule() {
+  local lookup_name="$1"
+  local mod_name pkgconf
+  if [ "${lookup_name%:*}" = "$lookup_name" ]
+  then
+    # Square brackets are redundant but benign for POSIX compliant tr,
+    # however Solaris /usr/bin/tr requires them. Sometimes Solaris
+    # gets installed without a complete set of xpg4 tools, sigh.
+    mod_name=$(echo $lookup_name | tr [A-Z] [a-z])
+  else
+    mod_name="${lookup_name#*:}"
+    lookup_name="${lookup_name%:*}"
+  fi
+
+  if want_dynamic "$lookup_name"
+  then
+    if [ -z "$enable_dynamic" ]; then
+      echo >&2 "Missing CFLAGS_DYNAMIC prevents building dynamic $lookup_name"
+      exit 1
+    fi
+    MODS="${MODS} ${mod_name}.so"
+    pkgconf=$(grep "^LOOKUP_${lookup_name}_PC" "$defs_source")
+    if [ $? -eq 0 ]; then
+      pkgconf=$(echo $pkgconf | sed 's/^.*= *//')
+      echo "LOOKUP_${mod_name}_INCLUDE = $(pkg-config --cflags $pkgconf)"
+      echo "LOOKUP_${mod_name}_LIBS = $(pkg-config --libs $pkgconf)"
+    else
+      grep "^LOOKUP_${lookup_name}_" "$defs_source"
+      echo "LOOKUP_${mod_name}_INCLUDE = \$(LOOKUP_${lookup_name}_INCLUDE)"
+      echo "LOOKUP_${mod_name}_LIBS = \$(LOOKUP_${lookup_name}_LIBS)"
+    fi
+  elif want_at_all "$lookup_name"
+  then
+    OBJ="${OBJ} ${mod_name}.o"
+  fi
+}
+
+rm -f "$target"
+exec 5>&1
+exec > "$target"
+
+sed -n "1,/$tag_marker/p" < "$input"
+
+for name_mod in \
+    CDB DBM:dbmdb DNSDB DSEARCH IBASE LSEARCH MYSQL NIS NISPLUS ORACLE \
+    PASSWD PGSQL REDIS SQLITE TESTDB WHOSON
+do
+  emit_module_rule $name_mod
+done
+
+if want_at_all LDAP
+then
+  OBJ="${OBJ} ldap.o"
+fi
+
+# Because the variable is EXPERIMENTAL_SPF and not LOOKUP_SPF we
+# always include spf.o and compile a dummy if EXPERIMENTAL_SPF is not
+# defined.
+
+OBJ="${OBJ} spf.o"
+
+if want_experimental LMDB
+then
+  OBJ="${OBJ} lmdb.o"
+fi
+
+echo "MODS = $MODS"
+echo "OBJ = $OBJ"
+
+sed -n "/$tag_marker/,\$p" < "$input"
+
+exec >&5
+
+# Configure-Makefile will move $target into place
+
+# vim: set ft=sh sw=2 :
diff --git a/scripts/newer b/scripts/newer
new file mode 100755
index 0000000..24c09e8
--- /dev/null
+++ b/scripts/newer
@@ -0,0 +1,21 @@
+#! /bin/sh
+
+# Script to determine whether the first file is newer than the second.
+# If the first does not exist, the answer is "no";
+# if the second does not exist, the answer is "yes";
+# otherwise their ages are compared using "find".
+
+if [ $# -ne 2 ]; then
+  echo "*** Two file names needed for 'newer' ***"
+  exit 2;
+fi
+
+if [ ! -f $1 ]; then exit 1; fi
+if [ ! -f $2 ]; then exit 0; fi
+
+case `find $1 -newer $2 -print` in
+'')	exit 1;;
+*)	exit 0;;
+esac
+
+# End
diff --git a/scripts/os-type b/scripts/os-type
new file mode 100755
index 0000000..a188c4a
--- /dev/null
+++ b/scripts/os-type
@@ -0,0 +1,164 @@
+#! /bin/sh
+
+# Shell script to determine the operating system type. Some of the heuristics
+# herein have accumulated over the years and may not strictly be needed now,
+# but they are left in under the principle of "If it ain't broke, don't fix
+# it."
+
+# For some OS there are two variants: a full name, which is used for the
+# build directory, and a generic name, which is used to identify the OS-
+# specific scripts, and which can be the same for different versions of
+# the OS. Solaris 2 is one such OS. The option -generic specifies the
+# latter type of output.
+
+# If EXIM_OSTYPE is set, use it. This allows a manual override.
+
+case "$EXIM_OSTYPE" in ?*) os="$EXIM_OSTYPE";; esac
+
+# Otherwise, try to get a value from the uname command. Use an explicit
+# option just in case there are any systems where -s is not the default.
+
+case "$os" in '') os=`uname -s`;; esac
+
+# Identify Glibc systems under different names.
+
+case "$os" in GNU) os=GNU;; esac
+case "$os" in GNU/*|Linux) os=Linux;; esac
+
+# It is believed that all systems respond to uname -s, but just in case
+# there is one that doesn't, use the shell's $OSTYPE variable. It is known
+# to be unhelpful for some systems (under IRIX is it "irix" and under BSDI
+# 3.0 it may be "386BSD") but those systems respond to uname -s, so this
+# doesn't matter.
+
+case "$os" in '') os="$OSTYPE";; esac
+
+# Failed to find OS type.
+
+case "$os" in
+'') echo "" 1>&2
+    echo "*** Failed to determine the operating system type." 1>&2
+    echo "" 1>&2
+    echo UnKnown
+    exit 1;;
+esac
+
+# Clean out gash characters
+
+os=`echo $os | sed 's,[^-+_.a-zA-Z0-9],,g'`
+
+# A value has been obtained for the os. Some massaging may be needed in
+# some cases to get a uniform set of values. In earlier versions of this
+# script, $OSTYPE was looked at before uname -s, and various shells set it
+# to things that are subtly different. It is possible that some of this may
+# no longer be needed.
+
+case "$os" in
+aix*)       os=AIX;;
+AIX*)       os=AIX;;
+bsdi*)      os=BSDI;;
+BSDOS)      os=BSDI;;
+BSD_OS)     os=BSDI;;
+CYGWIN*)    os=CYGWIN;;
+dgux)       os=DGUX;;
+freebsd*)   os=FreeBSD;;
+gnu)        os=GNU;;
+Irix5)      os=IRIX;;
+Irix6)      os=IRIX6;;
+IRIX64)     os=IRIX6;;
+irix6.5)    os=IRIX65;;
+IRIX)       version=`uname -r`
+            case "$version" in
+            5*)  os=IRIX;;
+            6.5) version=`uname -R | awk '{print $NF}'`
+                 version=`echo $version | sed 's,[^-+_a-zA-Z0-9],,g'`
+                 os=IRIX$version;;
+            6*)  os=IRIX632;;
+            esac;;
+HI-OSF1-MJ) os=HI-OSF;;
+HI-UXMPP)   os=HI-OSF;;
+hpux*)      os=HP-UX;;
+linux)      os=Linux;;
+linux-*)    os=Linux;;
+Linux-*)    os=Linux;;
+netbsd*)    os=NetBSD;;
+NetBSD*)    os=NetBSD;;
+openbsd*)   os=OpenBSD;;
+osf1)       os=OSF1;;
+qnx*)       os=QNX;;
+solaris*)   os=SunOS5;;
+sunos4*)    os=SunOS4;;
+UnixWare)   os=Unixware7;;
+Ultrix)     os=ULTRIX;;
+ultrix*)    os=ULTRIX;;
+esac
+
+# In the case of SunOS we need to distinguish between SunOS4 and Solaris (aka
+# SunOS5); in the case of BSDI we need to distinguish between versions 3 and 4;
+# in the case of HP-UX we need to distinguish between version 9 and later.
+
+case "$os" in
+SunOS)  case `uname -r` in
+        5*)     os="${os}5";;
+        4*)     os="${os}4";;
+        esac;;
+
+BSDI)   case `uname -r` in
+        3*)     os="${os}3";;
+        4.2*)   os="${os}4.2";;
+        4*)     os="${os}4";;
+        esac;;
+
+HP-UX)  case `uname -r` in
+        A.09*)  os="${os}-9";;
+        esac;;
+esac
+
+# Need to distinguish Solaris from the version on the HAL (64bit sparc,
+# CC=hcc -DV7). Also need to distinguish different versions of the OS
+# for building different binaries.
+
+case "$os" in
+SunOS5) case `uname -m` in
+        sun4H)  os="${os}-hal";;
+            *)  os="${os}-`uname -r`";;
+        esac
+        ;;
+
+# In the case of Linux we used to distinguish which libc was used so that
+# the old libc5 was supported as well as the current glibc. This support
+# was giving some people problems, so it was removed in June 2005, under
+# the assumption that nobody would be using libc5 any more (it is over seven
+# years old).
+
+# In the case of NetBSD we need to distinguish between a.out, ELF
+# and COFF binary formats.  However, a.out and COFF are the same
+# for our purposes, so both of them are defined as "a.out".
+# Todd Vierling of Wasabi Systems reported that NetBSD/sh3 (the
+# only NetBSD port that uses COFF binary format) will switch to
+# ELF soon.
+
+NetBSD) if echo __ELF__ | ${CC-cc} -E - | grep -q __ELF__ ; then
+        # Non-ELF system
+        os="NetBSD-a.out"
+        fi
+        ;;
+
+esac
+
+# If a generic OS name is requested, some further massaging is needed
+# for some systems.
+
+if [ "$1" = '-generic' ]; then
+  case "$os" in
+  SunOS5*) os=SunOS5;;
+  BSDI*)   os=BSDI;;
+  IRIX65*) os=IRIX65;;
+  esac
+fi
+
+# OK, the script seems to have worked. Pass the value back.
+
+echo "$os"
+
+# End of os-type
diff --git a/scripts/reversion b/scripts/reversion
new file mode 100755
index 0000000..3657cfc
--- /dev/null
+++ b/scripts/reversion
@@ -0,0 +1,128 @@
+#!/bin/sh
+# Copyright (c) The Exim Maintainers 1995 - 2018
+
+set -e
+LC_ALL=C
+export LC_ALL
+
+# Update Exim's version header file.
+
+# Compatibility gross-ness for non-POSIX systems
+if [ -z "$EXIM_REVERSION_ADJUSTED" ]
+then
+  SHELL=/bin/sh
+  EXIM_REVERSION_ADJUSTED=yes
+  export SHELL EXIM_REVERSION_ADJUSTED
+  # Solaris:
+  if [ -x /usr/xpg4/bin/sh ]
+  then
+    PATH="/usr/xpg4/bin:$PATH"
+    SHELL=/usr/xpg4/bin/sh
+    export PATH SHELL
+  fi
+  # Irix:
+  _XPG=1 ; export _XPG
+  #
+  exec "$SHELL" "$0" "$@"
+fi
+
+# Read version information that was generated by a previous run of
+# this script, or during the release process.
+
+if   [ -f ./version.sh ]; then
+    .    ./version.sh
+elif [ -f ../src/version.sh ]; then
+    .    ../src/version.sh
+elif [ -d ../../.git ] || [ -f ../../.git ] || [ "$1" = release ]; then
+    # Modify the output of git describe into separate parts for
+    # the name "exim" and the release and variant versions.
+    # Put a dot in the version number and remove a spurious g.
+    if [ "$2" ]
+    then
+        description=$(git describe "$2")
+    else
+        description=$(git describe --dirty=-XX --match 'exim-4*')
+    fi
+    set $(echo "$description" | sed 's/-/ /; s/-g/-/')
+    # Only update if we need to
+    if [ "$2 $3" != "$EXIM_RELEASE_VERSION $EXIM_VARIANT_VERSION" ]
+    then
+            EXIM_RELEASE_VERSION="$2"
+            EXIM_VARIANT_VERSION="$3"
+            rm -f version.h
+    fi
+else
+    echo "Cannot determine the release number" >&2
+    exit
+fi
+
+# If you are maintaining a patched version of Exim, you can either
+# create your own version.sh as part of your release process, or you
+# can modify EXIM_VARIANT_VERSION at this point in this script.
+
+if test -z "$EXIM_RELEASE_VERSION"; then
+    echo "$0: Your copy of Exim lacks any version information." >&2
+    exit 1
+fi
+
+EXIM_COMPILE_NUMBER=$(expr "${EXIM_COMPILE_NUMBER:-0}" + 1)
+
+echo "$EXIM_COMPILE_NUMBER" >cnumber.h
+
+# Reproducible builds, accept a build timestamp override from environ per
+# <https://reproducible-builds.org/specs/source-date-epoch/>.
+# We require a fairly modern date(1) command here, which is not portable
+# to some of the systems Exim is built on.  That's okay, because the scenarios
+# are:
+#  1) Local postmaster building, not using $SOURCE_DATE_EPOCH, doesn't matter
+#  2) Packaging folks who don't care about reproducible builds
+#  3) Packaging folks who care but are using systems where date Just Works
+#  3) Packaging folks who care and can put a modern date(1) in $PATH
+#  4) Packaging folks who care and can supply us with a clean patch to support
+#     their requirements
+#  5) Packaging folks who care but won't do any work to support their strange
+#     old systems and want us to do the work for them.  We don't care either,
+#     they're SOL and have to live without reproducible builds.
+#
+exim_build_date_override=''
+if [ ".${SOURCE_DATE_EPOCH:-}" != "." ]; then
+  fmt='+%d-%b-%Y %H:%M:%S'
+  # Non-reproducible, we use __DATE__ and __TIME__ in C, which respect timezone
+  # (think localtime, not gmtime); for reproduction between systems, UTC makes
+  # more sense and the examples available use UTC without explicitly mandating
+  # it.  I think that we can switch behavior and use UTC for reproducible
+  # builds without it causing any problems: nothing really cares about timezone.
+  # GNU date: "date -d @TS"
+  # BSD date: "date -r TS"
+  exim_build_date_override="$(date -u -d "@${SOURCE_DATE_EPOCH}" "$fmt" 2>/dev/null || date -u -r "${SOURCE_DATE_EPOCH}" "$fmt" 2>/dev/null)"
+fi
+
+( echo '# automatically generated file - see ../scripts/reversion'
+  echo EXIM_RELEASE_VERSION='"'"$EXIM_RELEASE_VERSION"'"'
+  test -n "$EXIM_VARIANT_VERSION" && \
+  echo EXIM_VARIANT_VERSION='"'"$EXIM_VARIANT_VERSION"'"'
+  echo EXIM_COMPILE_NUMBER='"'"$EXIM_COMPILE_NUMBER"'"'
+  if [ ".${exim_build_date_override:-}" != "." ]; then
+    echo EXIM_BUILD_DATE_OVERRIDE='"'"${exim_build_date_override}"'"'
+  fi
+) >version.sh
+
+if [ ! -f version.h ]
+then
+( echo '/* automatically generated file - see ../scripts/reversion */'
+  echo '#define EXIM_RELEASE_VERSION "'"$EXIM_RELEASE_VERSION"'"'
+  test -n "$EXIM_VARIANT_VERSION" && \
+  echo '#define EXIM_VARIANT_VERSION "'"$EXIM_VARIANT_VERSION"'"'
+  echo '#ifdef EXIM_VARIANT_VERSION'
+  echo '#define EXIM_VERSION_STR EXIM_RELEASE_VERSION "-" EXIM_VARIANT_VERSION'
+  echo '#else'
+  echo '#define EXIM_VERSION_STR EXIM_RELEASE_VERSION'
+  echo '#endif'
+  if [ ".${exim_build_date_override:-}" != "." ]; then
+    echo '#define EXIM_BUILD_DATE_OVERRIDE "'"${exim_build_date_override}"'"'
+  fi
+) >version.h
+fi
+
+echo ">>> version $EXIM_RELEASE_VERSION $EXIM_VARIANT_VERSION #$EXIM_COMPILE_NUMBER"
+echo
diff --git a/scripts/source_checks b/scripts/source_checks
new file mode 100644
index 0000000..918a6f8
--- /dev/null
+++ b/scripts/source_checks
@@ -0,0 +1,52 @@
+#!/bin/sh
+
+cd src;
+
+# Tables with struct items
+while read file table
+do
+  : $file $table
+  < $file \
+  perl -e '$/= undef; while (<>) { print $1 if /(?<='$table'\[\])\s*=\s*{\n(([^}].*\n)+)/m }' \
+  | awk '/{ (US)?"/ {print $2}' \
+  | awk -F\" '{print $2}' \
+  | LC_ALL=C sort -c \
+  || exit 1
+done <<-END
+	readconf.c	optionlist_config
+	globals.c	optionlist_auths
+	globals.c	debug_options
+	globals.c	header_names
+	globals.c	log_options
+	expand.c	item_table
+	std-crypto.c	dh_constants
+	transport.c	optionlist_transports
+	route.c		optionlist_routers
+	transports/appendfile.c	appendfile_transport_options
+	transports/autoreply.c	autoreply_transport_options
+	transports/lmtp.c	lmtp_transport_options
+	transports/pipe.c	pipe_transport_options
+	transports/smtp.c	smtp_transport_options
+	expand.c	var_table
+	acl.c		conditions
+	acl.c		controls_list
+END
+
+# Tables with just string items
+while read file table
+do
+  : $file $table
+  < $file \
+  perl -e '$/= undef; while (<>) { print $1 if /(?<='$table'\[\])\s*=\s*{\s?(([^}]*)+)}/m }' \
+  | awk -F\" '/"/ {print $2}' \
+  | LC_ALL=C sort -c \
+  || exit 1
+
+done <<-END
+	expand.c	item_table
+	expand.c	op_table_underscore
+	expand.c	op_table_main
+	expand.c	cond_table
+	acl.c		verbs
+END
+