diff options
Diffstat (limited to 'scripts/functions')
-rw-r--r-- | scripts/functions | 474 |
1 files changed, 474 insertions, 0 deletions
diff --git a/scripts/functions b/scripts/functions new file mode 100644 index 0000000..077697f --- /dev/null +++ b/scripts/functions @@ -0,0 +1,474 @@ +# -*- shell-script -*- + +_log_msg() +{ + if [ "${quiet?}" = "y" ]; then return; fi + # shellcheck disable=SC2059 + printf "$@" +} + +log_success_msg() +{ + _log_msg "Success: %s\\n" "$*" +} + +log_failure_msg() +{ + _log_msg "Failure: %s\\n" "$*" +} + +log_warning_msg() +{ + _log_msg "Warning: %s\\n" "$*" +} + +log_begin_msg() +{ + _log_msg "Begin: %s ... " "$*" +} + +log_end_msg() +{ + _log_msg "done.\\n" +} + +panic() +{ + local console rest IFS + + if command -v chvt >/dev/null 2>&1; then + chvt 1 + fi + + echo "$@" + # Disallow console access + if [ -n "${panic?}" ]; then + echo "Rebooting automatically due to panic= boot argument" + sleep "${panic}" + reboot + exit # in case reboot fails, force kernel panic + fi + + run_scripts /scripts/panic + + # Try to use setsid, which will enable job control in the shell + # and paging in more + if command -v setsid >/dev/null 2>&1; then + unset IFS + read -r console rest </proc/consoles + if [ "${console}" = "tty0" ]; then + # Need to choose a specific VT + console="tty1" + fi + # We don't have 'setsid -c' so we need to setsid, open + # the tty, and finally exec an interactive shell + REASON="$*" PS1='(initramfs) ' setsid sh -c "exec sh -i <>/dev/${console} 1>&0 2>&1" + else + REASON="$*" PS1='(initramfs) ' sh -i </dev/console >/dev/console 2>&1 + fi +} + +maybe_break() +{ + case ",${break?}," in + *,$1,*) + if [ "$1" = "top" ]; then + # udev is not yet running, so load keyboard drivers + if [ "${quiet}" = "y" ]; then + opts="-q" + else + opts="-v" + fi + modprobe ${opts} -a i8042 atkbd ehci-pci ehci-orion \ + ehci-hcd ohci-hcd ohci-pci uhci-hcd usbhid xhci \ + xhci-pci xhci-hcd + sleep 2 + for modalias in /sys/bus/hid/devices/*/modalias; do + if [ -f "${modalias}" ]; then + modprobe ${opts} -b "$(cat "${modalias}")" + fi + done + fi + panic "Spawning shell within the initramfs" + ;; + esac +} + +# For boot time only; this is overridden at build time in hook-functions +run_scripts() +{ + initdir=${1} + [ ! -d "${initdir}" ] && return + + shift + . "${initdir}/ORDER" +} + +# Load custom modules first +load_modules() +{ + if [ -e /conf/modules ]; then + while read -r m; do + # Skip empty lines + if [ -z "$m" ]; then + continue + fi + # Skip comments - d?ash removes whitespace prefix + com=$(printf "%.1s" "${m}") + if [ "$com" = "#" ]; then + continue + fi + # shellcheck disable=SC2086 + modprobe $m + done < /conf/modules + fi +} + +# lilo compatibility +parse_numeric() { + case $1 in + *:*) + # Does it match /[0-9]*:[0-9]*/? + minor=${1#*:} + major=${1%:*} + case $major$minor in + *[!0-9]*) + # No. + return + ;; + esac + ;; + "" | *[!A-Fa-f0-9]*) + # "", "/*", etc. + return + ;; + *) + # [A-Fa-f0-9]* + value=$(( 0x${1} )) + minor=$(( (value & 0xff) | (value >> 12) & 0xfff00 )) + major=$(( (value >> 8) & 0xfff )) + ;; + esac + + # shellcheck disable=SC2034 + ROOT="/dev/block/${major}:${minor}" +} + +# Parameter: device node to check +# Echos fstype to stdout +# Return value: indicates if an fs could be recognized +get_fstype () +{ + local FS FSTYPE + FS="${1}" + + # blkid has a more complete list of file systems, + # but fstype is more robust + FSTYPE="unknown" + eval "$(fstype "${FS}" 2> /dev/null)" + if [ "$FSTYPE" = "unknown" ]; then + FSTYPE=$(blkid -o value -s TYPE "${FS}") || return + fi + echo "${FSTYPE}" + return 0 +} + +_handle_device_vs_ip() +{ + # If the ip= parameter is present and is a colon-separated list, + # then: + # - If it specifies a device, use that in preference to any + # device name we already have + # - Otherwise, substitute in any device name we already have + local IFS=: + set -f + # shellcheck disable=SC2086 + set -- ${IP} + set +f + if [ -n "$6" ]; then + DEVICE="$6" + elif [ $# -ge 2 ] && [ -n "${DEVICE}" ]; then + IP="$1:$2:$3:$4:$5:${DEVICE}" + shift 6 || shift $# + IP="${IP}:$*" + fi +} + +configure_networking() +{ + if [ -n "${BOOTIF}" ]; then + # pxelinux sets BOOTIF to a value based on the mac address of the + # network card used to PXE boot, so use this value for DEVICE rather + # than a hard-coded device name from initramfs.conf. this facilitates + # network booting when machines may have multiple network cards. + # pxelinux sets BOOTIF to 01-$mac_address + + # strip off the leading "01-", which isn't part of the mac + # address + temp_mac=${BOOTIF#*-} + + # convert to typical mac address format by replacing "-" with ":" + bootif_mac="" + IFS='-' + for x in $temp_mac ; do + if [ -z "$bootif_mac" ]; then + bootif_mac="$x" + else + bootif_mac="$bootif_mac:$x" + fi + done + unset IFS + + # look for devices with matching mac address, and set DEVICE to + # appropriate value if match is found. + for device in /sys/class/net/* ; do + if [ -f "$device/address" ]; then + current_mac=$(cat "$device/address") + if [ "$bootif_mac" = "$current_mac" ]; then + DEVICE=${device##*/} + break + fi + fi + done + fi + + _handle_device_vs_ip + + # networking already configured thus bail out + [ -n "${DEVICE}" ] && [ -e /run/net-"${DEVICE}".conf ] && return 0 + + wait_for_udev 10 + + # support ip options see linux sources + # Documentation/filesystems/nfs/nfsroot.txt + # Documentation/frv/booting.txt + + for ROUNDTTT in 2 3 4 6 9 16 25 36 64 100; do + + # The NIC is to be configured if this file does not exist. + # Ip-Config tries to create this file and when it succeds + # creating the file, ipconfig is not run again. + for x in /run/net-"${DEVICE}".conf /run/net-*.conf ; do + [ -e "$x" ] && break 2 + done + + case ${IP} in + none|off) + # Do nothing + ;; + ""|on|any) + # Bring up device + ipconfig -t ${ROUNDTTT} "${DEVICE}" + ;; + dhcp|bootp|rarp|both) + ipconfig -t ${ROUNDTTT} -c "${IP}" -d "${DEVICE}" + ;; + *) + ipconfig -t ${ROUNDTTT} -d "$IP" + ;; + esac + done + + # source ipconfig output + if [ -n "${DEVICE}" ]; then + # source specific bootdevice + . "/run/net-${DEVICE}.conf" + else + # source any interface... + # ipconfig should have quit after first response + . /run/net-*.conf + fi +} + +# Wait for queued kernel/udev events +wait_for_udev() +{ + command -v udevadm >/dev/null 2>&1 || return 0 + udevadm settle ${1:+--timeout=$1} +} + +# Find a specific fstab entry +# $1=mountpoint +# $2=fstype (optional) +# returns 0 on success, 1 on failure (not found or no fstab) +read_fstab_entry() { + # Not found by default. + found=1 + + for file in ${rootmnt?}/etc/fstab; do + if [ -f "$file" ]; then + # shellcheck disable=SC2034 + while read -r MNT_FSNAME MNT_DIR MNT_TYPE MNT_OPTS MNT_FREQ MNT_PASS MNT_JUNK; do + case "$MNT_FSNAME" in + ""|\#*) + continue; + ;; + esac + if [ "$MNT_DIR" = "$1" ]; then + if [ -n "$2" ]; then + [ "$MNT_TYPE" = "$2" ] || continue; + fi + found=0 + break 2 + fi + done < "$file" + fi + done + + return $found +} + +# Resolve device node from a name. This expands any LABEL or UUID. +# $1=name +# Resolved name is echoed. +resolve_device() { + DEV="$1" + + case "$DEV" in + LABEL=* | UUID=* | PARTLABEL=* | PARTUUID=*) + DEV="$(blkid -l -t "$DEV" -o device)" || return 1 + ;; + esac + [ -e "$DEV" ] && echo "$DEV" +} + +# Check a file system. +# $1=device +# $2=mountpoint (for diagnostics only) +# $3=type (may be "auto") +_checkfs_once() +{ + DEV="$1" + NAME="$2" + TYPE="$3" + if [ "$NAME" = "/" ] ; then + NAME="root" + fi + FSCK_LOGFILE=/run/initramfs/fsck.log + FSCK_STAMPFILE=/run/initramfs/fsck-${NAME#/} + + if [ "${TYPE}" = "auto" ]; then + TYPE="$(get_fstype "${DEV}")" + fi + + FSCKCODE=0 + if [ -z "${TYPE}" ]; then + log_warning_msg "Type of $NAME file system is unknown, so skipping check." + return + fi + if ! command -v fsck >/dev/null 2>&1; then + log_warning_msg "fsck not present, so skipping $NAME file system" + return + fi + if [ "${fastboot?}" = "y" ] ; then + log_warning_msg "Fast boot enabled, so skipping $NAME file system check." + return + fi + + if [ "${forcefsck?}" = "y" ] + then + force="-f" + else + force="" + fi + + if [ "${fsckfix?}" = "y" ] + then + fix="-y" + elif [ "${fsckfix?}" = "n" ] + then + fix="-n" + else + fix="-a" + fi + + spinner="" + if [ -z "${debug?}" ]; then + spinner="-C" + fi + + if [ "${quiet}" = n ] + then + log_begin_msg "Will now check $NAME file system" + logsave -a -s $FSCK_LOGFILE fsck $spinner $force $fix -V -t "$TYPE" "$DEV" + FSCKCODE=$? + log_end_msg + else + log_begin_msg "Checking $NAME file system" + logsave -a -s $FSCK_LOGFILE fsck $spinner $force $fix -T -t "$TYPE" "$DEV" + FSCKCODE=$? + log_end_msg + fi + + # NOTE: "failure" is defined as exiting with a return code of + # 4, possibly or-ed with other flags. A return code of 1 + # indicates that file system errors were corrected but that + # the boot may proceed. + # + if [ "$FSCKCODE" -eq 32 ] + then + log_warning_msg "File system check was interrupted by user" + elif [ $((FSCKCODE & 4)) -eq 4 ] + then + log_failure_msg "File system check of the $NAME filesystem failed" + return 1 + elif [ "$FSCKCODE" -gt 1 ] + then + log_warning_msg "File system check failed but did not detect errors" + sleep 5 + else + true > $FSCK_STAMPFILE + fi + return 0 +} + +checkfs() +{ + while ! _checkfs_once "$@"; do + panic "The $2 filesystem on $1 requires a manual fsck" + done +} + +# Mount a file system. We parse the information from the fstab. This +# should be overridden by any boot script which can mount arbitrary +# filesystems such as /usr. This default implementation delegates to +# local or nfs based upon the filesystem type. +# $1=mountpoint mount location +mountfs() +{ + type=local + read_fstab_entry "$1" + if [ "${MNT_TYPE}" = "nfs" ] || [ "${MNT_TYPE}" = "nfs4" ]; then + type=nfs + fi + + ${type}_mount_fs "$1" +} + +# Mount the root file system. It should be overridden by all +# boot scripts. +mountroot() +{ + : +} + +# Run /scripts/${boot}-top. This should be overridden by all boot +# scripts. +mount_top() +{ + : +} + +# Run /scripts/${boot}-premount. This should be overridden by all boot +# scripts. +mount_premount() +{ + : +} + +# Run /scripts/${boot}-bottom. This should be overridden by all boot +# scripts. +mount_bottom() +{ + : +} |