Adding upstream version 4.19.249.upstream/4.19.249upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 35 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/net/can/fsl-flexcan.txt b/Documentation/devicetree/bindings/net/can/fsl-flexcan.txt
new file mode 100644
index 000000000..bfc0c4336
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/can/fsl-flexcan.txt
@@ -0,0 +1,35 @@
+Flexcan CAN controller on Freescale's ARM and PowerPC system-on-a-chip (SOC).
+
+Required properties:
+
+- compatible : Should be "fsl,<processor>-flexcan"
+
+  An implementation should also claim any of the following compatibles
+  that it is fully backwards compatible with:
+
+  - fsl,p1010-flexcan
+
+- reg : Offset and length of the register set for this device
+- interrupts : Interrupt tuple for this device
+
+Optional properties:
+
+- clock-frequency : The oscillator frequency driving the flexcan device
+
+- xceiver-supply: Regulator that powers the CAN transceiver
+
+- big-endian: This means the registers of FlexCAN controller are big endian.
+              This is optional property.i.e. if this property is not present in
+              device tree node then controller is assumed to be little endian.
+              if this property is present then controller is assumed to be big
+              endian.
+
+Example:
+
+	can@1c000 {
+		compatible = "fsl,p1010-flexcan";
+		reg = <0x1c000 0x1000>;
+		interrupts = <48 0x2>;
+		interrupt-parent = <&mpic>;
+		clock-frequency = <200000000>; // filled in by bootloader
+	};