Adding upstream version 4.19.249.upstream/4.19.249upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 41 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.txt
new file mode 100644
index 000000000..ca313a7ae
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.txt
@@ -0,0 +1,41 @@
+Ingenic jz47xx pin controller
+
+Please refer to pinctrl-bindings.txt in this directory for details of the
+common pinctrl bindings used by client devices, including the meaning of the
+phrase "pin configuration node".
+
+For the jz47xx SoCs, pin control is tightly bound with GPIO ports. All pins may
+be used as GPIOs, multiplexed device functions are configured within the
+GPIO port configuration registers and it is typical to refer to pins using the
+naming scheme "PxN" where x is a character identifying the GPIO port with
+which the pin is associated and N is an integer from 0 to 31 identifying the
+pin within that GPIO port. For example PA0 is the first pin in GPIO port A, and
+PB31 is the last pin in GPIO port B. The jz4740 contains 4 GPIO ports, PA to
+PD, for a total of 128 pins. The jz4780 contains 6 GPIO ports, PA to PF, for a
+total of 192 pins.
+
+
+Required properties:
+--------------------
+
+ - compatible: One of:
+    - "ingenic,jz4740-pinctrl"
+    - "ingenic,jz4770-pinctrl"
+    - "ingenic,jz4780-pinctrl"
+ - reg: Address range of the pinctrl registers.
+
+
+GPIO sub-nodes
+--------------
+
+The pinctrl node can have optional sub-nodes for the Ingenic GPIO driver;
+please refer to ../gpio/ingenic,gpio.txt.
+
+
+Example:
+--------
+
+pinctrl: pin-controller@10010000 {
+	compatible = "ingenic,jz4740-pinctrl";
+	reg = <0x10010000 0x400>;
+};