Adding upstream version 4.19.249.upstream/4.19.249upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

25 files changed, 2590 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/powerpc/fsl/cache_sram.txt b/Documentation/devicetree/bindings/powerpc/fsl/cache_sram.txt
new file mode 100644
index 000000000..781955f52
--- /dev/null
+++ b/Documentation/devicetree/bindings/powerpc/fsl/cache_sram.txt
@@ -0,0 +1,20 @@
+* Freescale PQ3 and QorIQ based Cache SRAM
+
+Freescale's mpc85xx and some QorIQ platforms provide an
+option of configuring a part of (or full) cache memory
+as SRAM. This cache SRAM representation in the device
+tree should be done as under:-
+
+Required properties:
+
+- compatible : should be "fsl,p2020-cache-sram"
+- fsl,cache-sram-ctlr-handle : points to the L2 controller
+- reg : offset and length of the cache-sram.
+
+Example:
+
+cache-sram@fff00000 {
+	fsl,cache-sram-ctlr-handle = <&L2>;
+	reg = <0 0xfff00000 0 0x10000>;
+	compatible = "fsl,p2020-cache-sram";
+};
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/ccf.txt b/Documentation/devicetree/bindings/powerpc/fsl/ccf.txt
new file mode 100644
index 000000000..454da7e08
--- /dev/null
+++ b/Documentation/devicetree/bindings/powerpc/fsl/ccf.txt
@@ -0,0 +1,46 @@
+Freescale CoreNet Coherency Fabric(CCF) Device Tree Binding
+
+DESCRIPTION
+
+The CoreNet coherency fabric is a fabric-oriented, connectivity infrastructure
+that enables the implementation of coherent, multicore systems.
+
+Required properties:
+
+- compatible: <string list>
+		fsl,corenet1-cf - CoreNet coherency fabric version 1.
+		Example chips: T4240, B4860
+
+		fsl,corenet2-cf - CoreNet coherency fabric version 2.
+		Example chips: P5040, P5020, P4080, P3041, P2041
+
+		fsl,corenet-cf - Used to represent the common registers
+		between CCF version 1 and CCF version 2.  This compatible
+		is retained for compatibility reasons, as it was already
+		used for both CCF version 1 chips and CCF version 2
+		chips.  It should be specified after either
+		"fsl,corenet1-cf" or "fsl,corenet2-cf".
+
+- reg: <prop-encoded-array>
+		A standard property. Represents the CCF registers.
+
+- interrupts: <prop-encoded-array>
+		Interrupt mapping for CCF error interrupt.
+
+- fsl,ccf-num-csdids: <u32>
+		Specifies the number of Coherency Subdomain ID Port Mapping
+		Registers that are supported by the CCF.
+
+- fsl,ccf-num-snoopids: <u32>
+		Specifies the number of Snoop ID Port Mapping Registers that
+		are supported by CCF.
+
+Example:
+
+	corenet-cf@18000 {
+		compatible = "fsl,corenet2-cf", "fsl,corenet-cf";
+		reg = <0x18000 0x1000>;
+		interrupts = <16 2 1 31>;
+		fsl,ccf-num-csdids = <32>;
+		fsl,ccf-num-snoopids = <32>;
+	};
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/cpus.txt b/Documentation/devicetree/bindings/powerpc/fsl/cpus.txt
new file mode 100644
index 000000000..d63ab1dec
--- /dev/null
+++ b/Documentation/devicetree/bindings/powerpc/fsl/cpus.txt
@@ -0,0 +1,33 @@
+===================================================================
+Power Architecture CPU Binding
+Copyright 2013 Freescale Semiconductor Inc.
+
+Power Architecture CPUs in Freescale SOCs are represented in device trees as
+per the definition in the Devicetree Specification.
+
+In addition to the the Devicetree Specification definitions, the properties
+defined below may be present on CPU nodes.
+
+PROPERTIES
+
+   - fsl,eref-*
+        Usage: optional
+        Value type: <empty>
+        Definition: The EREF (EREF: A Programmer.s Reference Manual for
+	Freescale Power Architecture) defines the architecture for Freescale
+	Power CPUs.  The EREF defines some architecture categories not defined
+	by the Power ISA.  For these EREF-specific categories, the existence of
+	a property named fsl,eref-[CAT], where [CAT] is the abbreviated category
+	name with all uppercase letters converted to lowercase, indicates that
+	the category is supported by the implementation.
+
+    - fsl,portid-mapping
+	Usage: optional
+	Value type: <u32>
+	Definition: The Coherency Subdomain ID Port Mapping Registers and
+	Snoop ID Port Mapping registers, which are part of the CoreNet
+	Coherency fabric (CCF), provide a CoreNet Coherency Subdomain
+	ID/CoreNet Snoop ID to cpu mapping functions.  Certain bits from
+	these registers should be set if the coresponding CPU should be
+	snooped.  This property defines a bitmask which selects the bit
+	that should be set if this cpu should be snooped.
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/dcsr.txt b/Documentation/devicetree/bindings/powerpc/fsl/dcsr.txt
new file mode 100644
index 000000000..4b01e1afa
--- /dev/null
+++ b/Documentation/devicetree/bindings/powerpc/fsl/dcsr.txt
@@ -0,0 +1,388 @@
+===================================================================
+Debug Control and Status Register (DCSR) Binding
+Copyright 2011 Freescale Semiconductor Inc.
+
+NOTE: The bindings described in this document are preliminary and subject
+to change.  Some of the compatible strings that contain only generic names
+may turn out to be inappropriate, or need additional properties to describe
+the integration of the block with the rest of the chip.
+
+=====================================================================
+Debug Control and Status Register Memory Map
+
+Description
+
+This node defines the base address and range for the
+defined DCSR Memory Map. Child nodes will describe the individual
+debug blocks defined within this memory space.
+
+PROPERTIES
+
+	- compatible
+	Usage: required
+	Value type: <string>
+	Definition: Must include "fsl,dcsr" and "simple-bus".
+	The DCSR space exists in the memory-mapped bus.
+
+	- #address-cells
+	Usage: required
+	Value type: <u32>
+	Definition: A standard property.  Defines the number of cells
+	or representing physical addresses in child nodes.
+
+	- #size-cells
+	Usage: required
+	Value type: <u32>
+	Definition: A standard property.  Defines the number of cells
+	or representing the size of physical addresses in
+	child nodes.
+
+	- ranges
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: A standard property. Specifies the physical address
+	range of the DCSR space.
+
+EXAMPLE
+	dcsr: dcsr@f00000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "fsl,dcsr", "simple-bus";
+		ranges = <0x00000000 0xf 0x00000000 0x01008000>;
+	};
+
+=====================================================================
+Event Processing Unit
+
+This node represents the region of DCSR space allocated to the EPU
+
+PROPERTIES
+
+	- compatible
+	Usage: required
+	Value type: <string>
+	Definition: Must include "fsl,dcsr-epu"
+
+	- interrupts
+	Usage: required
+	Value type: <prop_encoded-array>
+	Definition:  Specifies the interrupts generated by the EPU.
+	The value of the interrupts property consists of three
+	interrupt specifiers. The format of the specifier is defined
+	by the binding document describing the node's interrupt parent.
+
+	The EPU counters can be configured to assert the performance
+	monitor interrupt signal based on either counter overflow or value
+	match. Which counter asserted the interrupt is captured in an EPU
+	Counter Interrupt Status Register (EPCPUISR).
+
+	The EPU unit can also be configured to assert either or both of
+	two interrupt signals based on debug event sources within the SoC.
+	The interrupt signals are epu_xt_int0 and epu_xt_int1.
+	Which event source asserted the interrupt is captured in an EPU
+	Interrupt Status Register (EPISR0,EPISR1).
+
+	Interrupt numbers are listed in order (perfmon, event0, event1).
+
+	- reg
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: A standard property.  Specifies the physical address
+	offset and length of the DCSR space registers of the device
+	configuration block.
+
+EXAMPLE
+	dcsr-epu@0 {
+		compatible = "fsl,dcsr-epu";
+		interrupts = <52 2 0 0
+			      84 2 0 0
+			      85 2 0 0>;
+		interrupt-parent = <&mpic>;
+		reg = <0x0 0x1000>;
+	};
+
+=======================================================================
+Nexus Port Controller
+
+This node represents the region of DCSR space allocated to the NPC
+
+PROPERTIES
+
+	- compatible
+	Usage: required
+	Value type: <string>
+	Definition: Must include "fsl,dcsr-npc"
+
+	- reg
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: A standard property.  Specifies the physical address
+	offset and length of the DCSR space registers of the device
+	configuration block.
+	The Nexus Port controller occupies two regions in the DCSR space
+	with distinct functionality.
+
+	The first register range describes the Nexus Port Controller
+	control and status registers.
+
+	The second register range describes the Nexus Port Controller
+	internal trace buffer. The NPC trace buffer is a small memory buffer
+	which stages the nexus trace data for transmission via the Aurora port
+	or to a DDR based trace buffer. In some configurations the NPC trace
+	buffer can be the only trace buffer used.
+
+
+EXAMPLE
+		dcsr-npc {
+			compatible = "fsl,dcsr-npc";
+			reg = <0x1000 0x1000 0x1000000 0x8000>;
+		};
+
+=======================================================================
+Nexus Concentrator
+
+This node represents the region of DCSR space allocated to the NXC
+
+PROPERTIES
+
+	- compatible
+	Usage: required
+	Value type: <string>
+	Definition: Must include "fsl,dcsr-nxc"
+
+	- reg
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: A standard property.  Specifies the physical address
+	offset and length of the DCSR space registers of the device
+	configuration block.
+
+EXAMPLE
+		dcsr-nxc@2000 {
+			compatible = "fsl,dcsr-nxc";
+			reg = <0x2000 0x1000>;
+		};
+=======================================================================
+CoreNet Debug Controller
+
+This node represents the region of DCSR space allocated to
+the CoreNet Debug controller.
+
+PROPERTIES
+
+	- compatible
+	Usage: required
+	Value type: <string>
+	Definition: Must include "fsl,dcsr-corenet"
+
+	- reg
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: A standard property.  Specifies the physical address
+	offset and length of the DCSR space registers of the device
+	configuration block.
+	The CoreNet Debug controller occupies two regions in the DCSR space
+	with distinct functionality.
+
+	The first register range describes the CoreNet Debug Controller
+	functionalty to perform transaction and transaction attribute matches.
+
+	The second register range describes the CoreNet Debug Controller
+	functionalty to trigger event notifications and debug traces.
+
+EXAMPLE
+		dcsr-corenet {
+			compatible = "fsl,dcsr-corenet";
+			reg = <0x8000 0x1000 0xB0000 0x1000>;
+		};
+
+=======================================================================
+Data Path Debug controller
+
+This node represents the region of DCSR space allocated to
+the DPAA Debug Controller. This controller controls debug configuration
+for the QMAN and FMAN blocks.
+
+PROPERTIES
+
+	- compatible
+	Usage: required
+	Value type: <string>
+	Definition: Must include both an identifier specific to the SoC
+	or Debug IP of the form "fsl,<soc>-dcsr-dpaa" in addition to the
+	generic compatible string "fsl,dcsr-dpaa".
+
+	- reg
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: A standard property.  Specifies the physical address
+	offset and length of the DCSR space registers of the device
+	configuration block.
+
+EXAMPLE
+		dcsr-dpaa@9000 {
+			compatible = "fsl,p4080-dcsr-dpaa", "fsl,dcsr-dpaa";
+			reg = <0x9000 0x1000>;
+		};
+
+=======================================================================
+OCeaN Debug controller
+
+This node represents the region of DCSR space allocated to
+the OCN Debug Controller.
+
+PROPERTIES
+
+	- compatible
+	Usage: required
+	Value type: <string>
+	Definition: Must include both an identifier specific to the SoC
+	or Debug IP of the form "fsl,<soc>-dcsr-ocn" in addition to the
+	generic compatible string "fsl,dcsr-ocn".
+
+	- reg
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: A standard property.  Specifies the physical address
+	offset and length of the DCSR space registers of the device
+	configuration block.
+
+EXAMPLE
+		dcsr-ocn@11000 {
+			compatible = "fsl,p4080-dcsr-ocn", "fsl,dcsr-ocn";
+			reg = <0x11000 0x1000>;
+		};
+
+=======================================================================
+DDR Controller Debug controller
+
+This node represents the region of DCSR space allocated to
+the OCN Debug Controller.
+
+PROPERTIES
+
+	- compatible
+	Usage: required
+	Value type: <string>
+	Definition: Must include "fsl,dcsr-ddr"
+
+	- dev-handle
+	Usage: required
+	Definition: A phandle to associate this debug node with its
+	component controller.
+
+	- reg
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: A standard property.  Specifies the physical address
+	offset and length of the DCSR space registers of the device
+	configuration block.
+
+EXAMPLE
+		dcsr-ddr@12000 {
+			compatible = "fsl,dcsr-ddr";
+			dev-handle = <&ddr1>;
+			reg = <0x12000 0x1000>;
+		};
+
+=======================================================================
+Nexus Aurora Link Controller
+
+This node represents the region of DCSR space allocated to
+the NAL Controller.
+
+PROPERTIES
+
+	- compatible
+	Usage: required
+	Value type: <string>
+	Definition: Must include both an identifier specific to the SoC
+	or Debug IP of the form "fsl,<soc>-dcsr-nal" in addition to the
+	generic compatible string "fsl,dcsr-nal".
+
+	- reg
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: A standard property.  Specifies the physical address
+	offset and length of the DCSR space registers of the device
+	configuration block.
+
+EXAMPLE
+		dcsr-nal@18000 {
+			compatible = "fsl,p4080-dcsr-nal", "fsl,dcsr-nal";
+			reg = <0x18000 0x1000>;
+		};
+
+
+=======================================================================
+Run Control and Power Management
+
+This node represents the region of DCSR space allocated to
+the RCPM Debug Controller. This functionlity is limited to the
+control the debug operations of the SoC and cores.
+
+PROPERTIES
+
+	- compatible
+	Usage: required
+	Value type: <string>
+	Definition: Must include both an identifier specific to the SoC
+	or Debug IP of the form "fsl,<soc>-dcsr-rcpm" in addition to the
+	generic compatible string "fsl,dcsr-rcpm".
+
+	- reg
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: A standard property.  Specifies the physical address
+	offset and length of the DCSR space registers of the device
+	configuration block.
+
+EXAMPLE
+		dcsr-rcpm@22000 {
+			compatible = "fsl,p4080-dcsr-rcpm", "fsl,dcsr-rcpm";
+			reg = <0x22000 0x1000>;
+		};
+
+=======================================================================
+Core Service Bridge Proxy
+
+This node represents the region of DCSR space allocated to
+the Core Service Bridge Proxies.
+There is one Core Service Bridge Proxy device for each CPU in the system.
+This functionlity provides access to the debug operations of the CPU.
+
+PROPERTIES
+
+	- compatible
+	Usage: required
+	Value type: <string>
+	Definition: Must include both an identifier specific to the cpu
+	of the form "fsl,dcsr-<cpu>-sb-proxy" in addition to the
+	generic compatible string "fsl,dcsr-cpu-sb-proxy".
+
+	- cpu-handle
+	Usage: required
+	Definition: A phandle to associate this debug node with its cpu.
+
+	- reg
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: A standard property.  Specifies the physical address
+	offset and length of the DCSR space registers of the device
+	configuration block.
+
+EXAMPLE
+		dcsr-cpu-sb-proxy@40000 {
+			compatible = "fsl,dcsr-e500mc-sb-proxy",
+				     "fsl,dcsr-cpu-sb-proxy";
+			cpu-handle = <&cpu0>;
+			reg = <0x40000 0x1000>;
+		};
+		dcsr-cpu-sb-proxy@41000 {
+			compatible = "fsl,dcsr-e500mc-sb-proxy",
+				     "fsl,dcsr-cpu-sb-proxy";
+			cpu-handle = <&cpu1>;
+			reg = <0x41000 0x1000>;
+		};
+
+=======================================================================
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/diu.txt b/Documentation/devicetree/bindings/powerpc/fsl/diu.txt
new file mode 100644
index 000000000..eb45db1ec
--- /dev/null
+++ b/Documentation/devicetree/bindings/powerpc/fsl/diu.txt
@@ -0,0 +1,32 @@
+* Freescale Display Interface Unit
+
+The Freescale DIU is a LCD controller, with proper hardware, it can also
+drive DVI monitors.
+
+Required properties:
+- compatible : should be "fsl,diu" or "fsl,mpc5121-diu".
+- reg : should contain at least address and length of the DIU register
+  set.
+- interrupts : one DIU interrupt should be described here.
+
+Optional properties:
+- edid : verbatim EDID data block describing attached display.
+  Data from the detailed timing descriptor will be used to
+  program the display controller.
+
+Example (MPC8610HPCD):
+	display@2c000 {
+		compatible = "fsl,diu";
+		reg = <0x2c000 100>;
+		interrupts = <72 2>;
+		interrupt-parent = <&mpic>;
+	};
+
+Example for MPC5121:
+	display@2100 {
+		compatible = "fsl,mpc5121-diu";
+		reg = <0x2100 0x100>;
+		interrupts = <64 0x8>;
+		interrupt-parent = <&ipic>;
+		edid = [edid-data];
+	};
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/dma.txt b/Documentation/devicetree/bindings/powerpc/fsl/dma.txt
new file mode 100644
index 000000000..c11ad5c6d
--- /dev/null
+++ b/Documentation/devicetree/bindings/powerpc/fsl/dma.txt
@@ -0,0 +1,204 @@
+* Freescale DMA Controllers
+
+** Freescale Elo DMA Controller
+   This is a little-endian 4-channel DMA controller, used in Freescale mpc83xx
+   series chips such as mpc8315, mpc8349, mpc8379 etc.
+
+Required properties:
+
+- compatible        : must include "fsl,elo-dma"
+- reg               : DMA General Status Register, i.e. DGSR which contains
+                      status for all the 4 DMA channels
+- ranges            : describes the mapping between the address space of the
+                      DMA channels and the address space of the DMA controller
+- cell-index        : controller index.  0 for controller @ 0x8100
+- interrupts        : interrupt specifier for DMA IRQ
+
+- DMA channel nodes:
+        - compatible        : must include "fsl,elo-dma-channel"
+                              However, see note below.
+        - reg               : DMA channel specific registers
+        - cell-index        : DMA channel index starts at 0.
+
+Optional properties:
+        - interrupts        : interrupt specifier for DMA channel IRQ
+                              (on 83xx this is expected to be identical to
+                              the interrupts property of the parent node)
+
+Example:
+	dma@82a8 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "fsl,mpc8349-dma", "fsl,elo-dma";
+		reg = <0x82a8 4>;
+		ranges = <0 0x8100 0x1a4>;
+		interrupt-parent = <&ipic>;
+		interrupts = <71 8>;
+		cell-index = <0>;
+		dma-channel@0 {
+			compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
+			cell-index = <0>;
+			reg = <0 0x80>;
+			interrupt-parent = <&ipic>;
+			interrupts = <71 8>;
+		};
+		dma-channel@80 {
+			compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
+			cell-index = <1>;
+			reg = <0x80 0x80>;
+			interrupt-parent = <&ipic>;
+			interrupts = <71 8>;
+		};
+		dma-channel@100 {
+			compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
+			cell-index = <2>;
+			reg = <0x100 0x80>;
+			interrupt-parent = <&ipic>;
+			interrupts = <71 8>;
+		};
+		dma-channel@180 {
+			compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
+			cell-index = <3>;
+			reg = <0x180 0x80>;
+			interrupt-parent = <&ipic>;
+			interrupts = <71 8>;
+		};
+	};
+
+** Freescale EloPlus DMA Controller
+   This is a 4-channel DMA controller with extended addresses and chaining,
+   mainly used in Freescale mpc85xx/86xx, Pxxx and BSC series chips, such as
+   mpc8540, mpc8641 p4080, bsc9131 etc.
+
+Required properties:
+
+- compatible        : must include "fsl,eloplus-dma"
+- reg               : DMA General Status Register, i.e. DGSR which contains
+                      status for all the 4 DMA channels
+- cell-index        : controller index.  0 for controller @ 0x21000,
+                                         1 for controller @ 0xc000
+- ranges            : describes the mapping between the address space of the
+                      DMA channels and the address space of the DMA controller
+
+- DMA channel nodes:
+        - compatible        : must include "fsl,eloplus-dma-channel"
+                              However, see note below.
+        - cell-index        : DMA channel index starts at 0.
+        - reg               : DMA channel specific registers
+        - interrupts        : interrupt specifier for DMA channel IRQ
+
+Example:
+	dma@21300 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "fsl,mpc8540-dma", "fsl,eloplus-dma";
+		reg = <0x21300 4>;
+		ranges = <0 0x21100 0x200>;
+		cell-index = <0>;
+		dma-channel@0 {
+			compatible = "fsl,mpc8540-dma-channel", "fsl,eloplus-dma-channel";
+			reg = <0 0x80>;
+			cell-index = <0>;
+			interrupt-parent = <&mpic>;
+			interrupts = <20 2>;
+		};
+		dma-channel@80 {
+			compatible = "fsl,mpc8540-dma-channel", "fsl,eloplus-dma-channel";
+			reg = <0x80 0x80>;
+			cell-index = <1>;
+			interrupt-parent = <&mpic>;
+			interrupts = <21 2>;
+		};
+		dma-channel@100 {
+			compatible = "fsl,mpc8540-dma-channel", "fsl,eloplus-dma-channel";
+			reg = <0x100 0x80>;
+			cell-index = <2>;
+			interrupt-parent = <&mpic>;
+			interrupts = <22 2>;
+		};
+		dma-channel@180 {
+			compatible = "fsl,mpc8540-dma-channel", "fsl,eloplus-dma-channel";
+			reg = <0x180 0x80>;
+			cell-index = <3>;
+			interrupt-parent = <&mpic>;
+			interrupts = <23 2>;
+		};
+	};
+
+** Freescale Elo3 DMA Controller
+   DMA controller which has same function as EloPlus except that Elo3 has 8
+   channels while EloPlus has only 4, it is used in Freescale Txxx and Bxxx
+   series chips, such as t1040, t4240, b4860.
+
+Required properties:
+
+- compatible        : must include "fsl,elo3-dma"
+- reg               : contains two entries for DMA General Status Registers,
+                      i.e. DGSR0 which includes status for channel 1~4, and
+                      DGSR1 for channel 5~8
+- ranges            : describes the mapping between the address space of the
+                      DMA channels and the address space of the DMA controller
+
+- DMA channel nodes:
+        - compatible        : must include "fsl,eloplus-dma-channel"
+        - reg               : DMA channel specific registers
+        - interrupts        : interrupt specifier for DMA channel IRQ
+
+Example:
+dma@100300 {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "fsl,elo3-dma";
+	reg = <0x100300 0x4>,
+	      <0x100600 0x4>;
+	ranges = <0x0 0x100100 0x500>;
+	dma-channel@0 {
+		compatible = "fsl,eloplus-dma-channel";
+		reg = <0x0 0x80>;
+		interrupts = <28 2 0 0>;
+	};
+	dma-channel@80 {
+		compatible = "fsl,eloplus-dma-channel";
+		reg = <0x80 0x80>;
+		interrupts = <29 2 0 0>;
+	};
+	dma-channel@100 {
+		compatible = "fsl,eloplus-dma-channel";
+		reg = <0x100 0x80>;
+		interrupts = <30 2 0 0>;
+	};
+	dma-channel@180 {
+		compatible = "fsl,eloplus-dma-channel";
+		reg = <0x180 0x80>;
+		interrupts = <31 2 0 0>;
+	};
+	dma-channel@300 {
+		compatible = "fsl,eloplus-dma-channel";
+		reg = <0x300 0x80>;
+		interrupts = <76 2 0 0>;
+	};
+	dma-channel@380 {
+		compatible = "fsl,eloplus-dma-channel";
+		reg = <0x380 0x80>;
+		interrupts = <77 2 0 0>;
+	};
+	dma-channel@400 {
+		compatible = "fsl,eloplus-dma-channel";
+		reg = <0x400 0x80>;
+		interrupts = <78 2 0 0>;
+	};
+	dma-channel@480 {
+		compatible = "fsl,eloplus-dma-channel";
+		reg = <0x480 0x80>;
+		interrupts = <79 2 0 0>;
+	};
+};
+
+Note on DMA channel compatible properties: The compatible property must say
+"fsl,elo-dma-channel" or "fsl,eloplus-dma-channel" to be used by the Elo DMA
+driver (fsldma).  Any DMA channel used by fsldma cannot be used by another
+DMA driver, such as the SSI sound drivers for the MPC8610.  Therefore, any DMA
+channel that should be used for another driver should not use
+"fsl,elo-dma-channel" or "fsl,eloplus-dma-channel".  For the SSI drivers, for
+example, the compatible property should be "fsl,ssi-dma-channel".  See ssi.txt
+for more information.
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/ecm.txt b/Documentation/devicetree/bindings/powerpc/fsl/ecm.txt
new file mode 100644
index 000000000..76dc547bc
--- /dev/null
+++ b/Documentation/devicetree/bindings/powerpc/fsl/ecm.txt
@@ -0,0 +1,60 @@
+=====================================================================
+E500 LAW & Coherency Module Device Tree Binding
+Copyright (C) 2009 Freescale Semiconductor Inc.
+=====================================================================
+
+Local Access Window (LAW) Node
+
+The LAW node represents the region of CCSR space where local access
+windows are configured.  For ECM based devices this is the first 4k
+of CCSR space that includes CCSRBAR, ALTCBAR, ALTCAR, BPTR, and some
+number of local access windows as specified by fsl,num-laws.
+
+PROPERTIES
+
+  - compatible
+      Usage: required
+      Value type: <string>
+      Definition: Must include "fsl,ecm-law"
+
+  - reg
+      Usage: required
+      Value type: <prop-encoded-array>
+      Definition: A standard property.  The value specifies the
+          physical address offset and length of the CCSR space
+          registers.
+
+  - fsl,num-laws
+      Usage: required
+      Value type: <u32>
+      Definition: The value specifies the number of local access
+          windows for this device.
+
+=====================================================================
+
+E500 Coherency Module Node
+
+The E500 LAW node represents the region of CCSR space where ECM config
+and error reporting registers exist, this is the second 4k (0x1000)
+of CCSR space.
+
+PROPERTIES
+
+  - compatible
+      Usage: required
+      Value type: <string>
+      Definition: Must include "fsl,CHIP-ecm", "fsl,ecm" where
+      CHIP is the processor (mpc8572, mpc8544, etc.)
+
+  - reg
+      Usage: required
+      Value type: <prop-encoded-array>
+      Definition: A standard property.  The value specifies the
+          physical address offset and length of the CCSR space
+          registers.
+
+   - interrupts
+      Usage: required
+      Value type: <prop-encoded-array>
+
+=====================================================================
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/interlaken-lac.txt b/Documentation/devicetree/bindings/powerpc/fsl/interlaken-lac.txt
new file mode 100644
index 000000000..ed6a414b2
--- /dev/null
+++ b/Documentation/devicetree/bindings/powerpc/fsl/interlaken-lac.txt
@@ -0,0 +1,309 @@
+===============================================================================
+Freescale Interlaken Look-Aside Controller Device Bindings
+Copyright 2012 Freescale Semiconductor Inc.
+
+CONTENTS
+  - Interlaken Look-Aside Controller (LAC) Node
+  - Example LAC Node
+  - Interlaken Look-Aside Controller (LAC) Software Portal Node
+  - Interlaken Look-Aside Controller (LAC) Software Portal Child Nodes
+  - Example LAC SWP Node with Child Nodes
+
+==============================================================================
+Interlaken Look-Aside Controller (LAC) Node
+
+DESCRIPTION
+
+The Interlaken is a narrow, high speed channelized chip-to-chip interface. To
+facilitate interoperability between a data path device and a look-aside
+co-processor, the Interlaken Look-Aside protocol is defined for short
+transaction-related transfers. Although based on the Interlaken protocol,
+Interlaken Look-Aside is not directly compatible with Interlaken and can be
+considered a different operation mode.
+
+The Interlaken LA controller connects internal platform to Interlaken serial
+interface. It accepts LA command through software portals, which are system
+memory mapped 4KB spaces. The LA commands are then translated into the
+Interlaken control words and data words, which are sent on TX side to TCAM
+through SerDes lanes.
+
+There are two 4KiB spaces defined within the LAC global register memory map.
+There is a full register set at 0x0000-0x0FFF (also known as the "hypervisor"
+version), and a subset at 0x1000-0x1FFF.  The former is a superset of the
+latter, and includes certain registers that should not be accessible to
+partitioned software.  Separate nodes are used for each region, with a phandle
+linking the hypervisor node to the normal operating node.
+
+PROPERTIES
+
+  - compatible
+	Usage: required
+	Value type: <string>
+	Definition: Must include "fsl,interlaken-lac". This represents only
+		those LAC CCSR registers not protected in partitioned
+		software. The version of the device is determined by the LAC
+		IP Block Revision Register (IPBRR0) at offset 0x0BF8.
+
+		Table of correspondences between IPBRR0 values and example
+		chips:
+			Value		Device
+			-----------	-------
+			0x02000100	T4240
+
+		The Hypervisor node has a different compatible. It must include
+		"fsl,interlaken-lac-hv". This node represents the protected
+		LAC register space and is required except inside a partition
+		where access to the hypervisor node is to be denied.
+
+  - fsl,non-hv-node
+	Usage: required in "fsl,interlaken-lac-hv"
+	Value type: <phandle>
+	Definition: Points to the non-protected LAC CCSR mapped register space
+		node.
+
+  - reg
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: A standard property. The first resource represents the
+		Interlaken LAC configuration registers.
+
+  - interrupts:
+	Usage: required in non-hv node only
+	Value type: <prop-encoded-array>
+	Definition: Interrupt mapping for Interlaken LAC error IRQ.
+
+EXAMPLE
+	lac: lac@229000 {
+		compatible = "fsl,interlaken-lac"
+		reg = <0x229000 0x1000>;
+		interrupts = <16 2 1 18>;
+	};
+
+	lac-hv@228000 {
+		compatible = "fsl,interlaken-lac-hv"
+		reg = <0x228000 0x1000>;
+		fsl,non-hv-node = <&lac>;
+	};
+
+===============================================================================
+Interlaken Look-Aside Controller (LAC) Software Portal Container Node
+
+DESCRIPTION
+The Interlaken Look-Aside Controller (LAC) utilizes Software Portals to accept
+Interlaken Look-Aside (ILA) commands. The Interlaken LAC software portal
+memory map occupies 128KB of memory space. The software portal memory space is
+intended to be cache-enabled. WIMG for each software space is required to be
+0010 if stashing is enabled; otherwise, WIMG can be 0000 or 0010.
+
+PROPERTIES
+
+  - #address-cells
+	Usage: required
+	Value type: <u32>
+	Definition: A standard property. Must have a value of 1.
+
+  - #size-cells
+	Usage: required
+	Value type: <u32>
+	Definition: A standard property. Must have a value of 1.
+
+  - compatible
+	Usage: required
+	Value type: <string>
+	Definition: Must include "fsl,interlaken-lac-portals"
+
+  - ranges
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: A standard property. Specifies the address and length
+		of the LAC portal memory space.
+
+===============================================================================
+Interlaken Look-Aside Controller (LAC) Software Portals Child Nodes
+
+DESCRIPTION
+There are up to 24 available software portals with each software portal
+requiring 4KB of consecutive memory within the software portal memory mapped
+space.
+
+PROPERTIES
+
+  - compatible
+	Usage: required
+	Value type: <string>
+	Definition: Must include "fsl,interlaken-lac-portal-vX.Y" where X is
+		the Major version (IP_MJ) found in the LAC IP Block Revision
+		Register (IPBRR0), at offset 0x0BF8, and Y is the Minor version
+		(IP_MN).
+
+		Table of correspondences between version values and example chips:
+		    Value	Device
+		    ------	-------
+		      1.0	T4240
+
+  - reg
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: A standard property.  The first resource represents the
+		Interlaken LAC software portal registers.
+
+  - fsl,liodn
+	Value type: <u32>
+	Definition: The logical I/O device number (LIODN) for this device.  The
+		LIODN is a number expressed by this device and used to perform
+		look-ups in the IOMMU (PAMU) address table when performing
+		DMAs. This property is automatically added by u-boot.
+
+===============================================================================
+EXAMPLE
+
+lac-portals {
+	#address-cells = <0x1>;
+	#size-cells = <0x1>;
+	compatible = "fsl,interlaken-lac-portals";
+	ranges = <0x0 0xf 0xf4400000 0x20000>;
+
+	lportal0: lac-portal@0 {
+		compatible = "fsl,interlaken-lac-portal-v1.0";
+		fsl,liodn = <0x204>;
+		reg = <0x0 0x1000>;
+	};
+
+	lportal1: lac-portal@1000 {
+		compatible = "fsl,interlaken-lac-portal-v1.0";
+		fsl,liodn = <0x205>;
+		reg = <0x1000 0x1000>;
+	};
+
+	lportal2: lac-portal@2000 {
+		compatible = "fsl,interlaken-lac-portal-v1.0";
+		fsl,liodn = <0x206>;
+		reg = <0x2000 0x1000>;
+	};
+
+	lportal3: lac-portal@3000 {
+		compatible = "fsl,interlaken-lac-portal-v1.0";
+		fsl,liodn = <0x207>;
+		reg = <0x3000 0x1000>;
+	};
+
+	lportal4: lac-portal@4000 {
+		compatible = "fsl,interlaken-lac-portal-v1.0";
+		fsl,liodn = <0x208>;
+		reg = <0x4000 0x1000>;
+	};
+
+	lportal5: lac-portal@5000 {
+		compatible = "fsl,interlaken-lac-portal-v1.0";
+		fsl,liodn = <0x209>;
+		reg = <0x5000 0x1000>;
+	};
+
+	lportal6: lac-portal@6000 {
+		compatible = "fsl,interlaken-lac-portal-v1.0";
+		fsl,liodn = <0x20A>;
+		reg = <0x6000 0x1000>;
+	};
+
+	lportal7: lac-portal@7000 {
+		compatible = "fsl,interlaken-lac-portal-v1.0";
+		fsl,liodn = <0x20B>;
+		reg = <0x7000 0x1000>;
+	};
+
+	lportal8: lac-portal@8000 {
+		compatible = "fsl,interlaken-lac-portal-v1.0";
+		fsl,liodn = <0x20C>;
+		reg = <0x8000 0x1000>;
+	};
+
+	lportal9: lac-portal@9000 {
+		compatible = "fsl,interlaken-lac-portal-v1.0";
+		fsl,liodn = <0x20D>;
+		reg = <0x9000 0x1000>;
+	};
+
+	lportal10: lac-portal@a000 {
+		compatible = "fsl,interlaken-lac-portal-v1.0";
+		fsl,liodn = <0x20E>;
+		reg = <0xA000 0x1000>;
+	};
+
+	lportal11: lac-portal@b000 {
+		compatible = "fsl,interlaken-lac-portal-v1.0";
+		fsl,liodn = <0x20F>;
+		reg = <0xB000 0x1000>;
+	};
+
+	lportal12: lac-portal@c000 {
+		compatible = "fsl,interlaken-lac-portal-v1.0";
+		fsl,liodn = <0x210>;
+		reg = <0xC000 0x1000>;
+	};
+
+	lportal13: lac-portal@d000 {
+		compatible = "fsl,interlaken-lac-portal-v1.0";
+		fsl,liodn = <0x211>;
+		reg = <0xD000 0x1000>;
+	};
+
+	lportal14: lac-portal@e000 {
+		compatible = "fsl,interlaken-lac-portal-v1.0";
+		fsl,liodn = <0x212>;
+		reg = <0xE000 0x1000>;
+	};
+
+	lportal15: lac-portal@f000 {
+		compatible = "fsl,interlaken-lac-portal-v1.0";
+		fsl,liodn = <0x213>;
+		reg = <0xF000 0x1000>;
+	};
+
+	lportal16: lac-portal@10000 {
+		compatible = "fsl,interlaken-lac-portal-v1.0";
+		fsl,liodn = <0x214>;
+		reg = <0x10000 0x1000>;
+	};
+
+	lportal17: lac-portal@11000 {
+		compatible = "fsl,interlaken-lac-portal-v1.0";
+		fsl,liodn = <0x215>;
+		reg = <0x11000 0x1000>;
+	};
+
+	lportal8: lac-portal@1200 {
+		compatible = "fsl,interlaken-lac-portal-v1.0";
+		fsl,liodn = <0x216>;
+		reg = <0x12000 0x1000>;
+	};
+
+	lportal19: lac-portal@13000 {
+		compatible = "fsl,interlaken-lac-portal-v1.0";
+		fsl,liodn = <0x217>;
+		reg = <0x13000 0x1000>;
+	};
+
+	lportal20: lac-portal@14000 {
+		compatible = "fsl,interlaken-lac-portal-v1.0";
+		fsl,liodn = <0x218>;
+		reg = <0x14000 0x1000>;
+	};
+
+	lportal21: lac-portal@15000 {
+		compatible = "fsl,interlaken-lac-portal-v1.0";
+		fsl,liodn = <0x219>;
+		reg = <0x15000 0x1000>;
+	};
+
+	lportal22: lac-portal@16000 {
+		compatible = "fsl,interlaken-lac-portal-v1.0";
+		fsl,liodn = <0x21A>;
+		reg = <0x16000 0x1000>;
+	};
+
+	lportal23: lac-portal@17000 {
+		compatible = "fsl,interlaken-lac-portal-v1.0";
+		fsl,liodn = <0x21B>;
+		reg = <0x17000 0x1000>;
+	};
+};
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/l2cache.txt b/Documentation/devicetree/bindings/powerpc/fsl/l2cache.txt
new file mode 100644
index 000000000..8a7069639
--- /dev/null
+++ b/Documentation/devicetree/bindings/powerpc/fsl/l2cache.txt
@@ -0,0 +1,61 @@
+Freescale L2 Cache Controller
+
+L2 cache is present in Freescale's QorIQ and QorIQ Qonverge platforms.
+The cache bindings explained below are Devicetree Specification compliant
+
+Required Properties:
+
+- compatible	: Should include one of the following:
+		  "fsl,8540-l2-cache-controller"
+		  "fsl,8541-l2-cache-controller"
+		  "fsl,8544-l2-cache-controller"
+		  "fsl,8548-l2-cache-controller"
+		  "fsl,8555-l2-cache-controller"
+		  "fsl,8568-l2-cache-controller"
+		  "fsl,b4420-l2-cache-controller"
+		  "fsl,b4860-l2-cache-controller"
+		  "fsl,bsc9131-l2-cache-controller"
+		  "fsl,bsc9132-l2-cache-controller"
+		  "fsl,c293-l2-cache-controller"
+		  "fsl,mpc8536-l2-cache-controller"
+		  "fsl,mpc8540-l2-cache-controller"
+		  "fsl,mpc8541-l2-cache-controller"
+		  "fsl,mpc8544-l2-cache-controller"
+		  "fsl,mpc8548-l2-cache-controller"
+		  "fsl,mpc8555-l2-cache-controller"
+		  "fsl,mpc8560-l2-cache-controller"
+		  "fsl,mpc8568-l2-cache-controller"
+		  "fsl,mpc8569-l2-cache-controller"
+		  "fsl,mpc8572-l2-cache-controller"
+		  "fsl,p1010-l2-cache-controller"
+		  "fsl,p1011-l2-cache-controller"
+		  "fsl,p1012-l2-cache-controller"
+		  "fsl,p1013-l2-cache-controller"
+		  "fsl,p1014-l2-cache-controller"
+		  "fsl,p1015-l2-cache-controller"
+		  "fsl,p1016-l2-cache-controller"
+		  "fsl,p1020-l2-cache-controller"
+		  "fsl,p1021-l2-cache-controller"
+		  "fsl,p1022-l2-cache-controller"
+		  "fsl,p1023-l2-cache-controller"
+		  "fsl,p1024-l2-cache-controller"
+		  "fsl,p1025-l2-cache-controller"
+		  "fsl,p2010-l2-cache-controller"
+		  "fsl,p2020-l2-cache-controller"
+		  "fsl,t2080-l2-cache-controller"
+		  "fsl,t4240-l2-cache-controller"
+		  and "cache".
+- reg		: Address and size of L2 cache controller registers
+- cache-size	: Size of the entire L2 cache
+- interrupts	: Error interrupt of L2 controller
+- cache-line-size : Size of L2 cache lines
+
+Example:
+
+	L2: l2-cache-controller@20000 {
+		compatible = "fsl,bsc9132-l2-cache-controller", "cache";
+		reg = <0x20000 0x1000>;
+		cache-line-size = <32>; // 32 bytes
+		cache-size = <0x40000>; // L2,256K
+		interrupts = <16 2 1 0>;
+	};
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/lbc.txt b/Documentation/devicetree/bindings/powerpc/fsl/lbc.txt
new file mode 100644
index 000000000..1c80fcede
--- /dev/null
+++ b/Documentation/devicetree/bindings/powerpc/fsl/lbc.txt
@@ -0,0 +1,43 @@
+* Chipselect/Local Bus
+
+Properties:
+- name : Should be localbus
+- #address-cells : Should be either two or three.  The first cell is the
+                   chipselect number, and the remaining cells are the
+                   offset into the chipselect.
+- #size-cells : Either one or two, depending on how large each chipselect
+                can be.
+- ranges : Each range corresponds to a single chipselect, and cover
+           the entire access window as configured.
+
+Example:
+	localbus@f0010100 {
+		compatible = "fsl,mpc8272-localbus",
+			   "fsl,pq2-localbus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		reg = <0xf0010100 0x40>;
+
+		ranges = <0x0 0x0 0xfe000000 0x02000000
+			  0x1 0x0 0xf4500000 0x00008000
+			  0x2 0x0 0xfd810000 0x00010000>;
+
+		flash@0,0 {
+			compatible = "jedec-flash";
+			reg = <0x0 0x0 0x2000000>;
+			bank-width = <4>;
+			device-width = <1>;
+		};
+
+		board-control@1,0 {
+			reg = <0x1 0x0 0x20>;
+			compatible = "fsl,mpc8272ads-bcsr";
+		};
+
+		simple-periph@2,0 {
+			compatible = "fsl,elbc-gpcm-uio";
+			reg = <0x2 0x0 0x10000>;
+			elbc-gpcm-br = <0xfd810800>;
+			elbc-gpcm-or = <0xffff09f7>;
+		};
+	};
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/mcm.txt b/Documentation/devicetree/bindings/powerpc/fsl/mcm.txt
new file mode 100644
index 000000000..a5dae6b1f
--- /dev/null
+++ b/Documentation/devicetree/bindings/powerpc/fsl/mcm.txt
@@ -0,0 +1,60 @@
+=====================================================================
+MPX LAW & Coherency Module Device Tree Binding
+Copyright (C) 2009 Freescale Semiconductor Inc.
+=====================================================================
+
+Local Access Window (LAW) Node
+
+The LAW node represents the region of CCSR space where local access
+windows are configured.  For MCM based devices this is the first 4k
+of CCSR space that includes CCSRBAR, ALTCBAR, ALTCAR, BPTR, and some
+number of local access windows as specified by fsl,num-laws.
+
+PROPERTIES
+
+  - compatible
+      Usage: required
+      Value type: <string>
+      Definition: Must include "fsl,mcm-law"
+
+  - reg
+      Usage: required
+      Value type: <prop-encoded-array>
+      Definition: A standard property.  The value specifies the
+          physical address offset and length of the CCSR space
+          registers.
+
+  - fsl,num-laws
+      Usage: required
+      Value type: <u32>
+      Definition: The value specifies the number of local access
+          windows for this device.
+
+=====================================================================
+
+MPX Coherency Module Node
+
+The MPX LAW node represents the region of CCSR space where MCM config
+and error reporting registers exist, this is the second 4k (0x1000)
+of CCSR space.
+
+PROPERTIES
+
+  - compatible
+      Usage: required
+      Value type: <string>
+      Definition: Must include "fsl,CHIP-mcm", "fsl,mcm" where
+      CHIP is the processor (mpc8641, mpc8610, etc.)
+
+  - reg
+      Usage: required
+      Value type: <prop-encoded-array>
+      Definition: A standard property.  The value specifies the
+          physical address offset and length of the CCSR space
+          registers.
+
+   - interrupts
+      Usage: required
+      Value type: <prop-encoded-array>
+
+=====================================================================
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/mcu-mpc8349emitx.txt b/Documentation/devicetree/bindings/powerpc/fsl/mcu-mpc8349emitx.txt
new file mode 100644
index 000000000..37f91fa57
--- /dev/null
+++ b/Documentation/devicetree/bindings/powerpc/fsl/mcu-mpc8349emitx.txt
@@ -0,0 +1,17 @@
+Freescale MPC8349E-mITX-compatible Power Management Micro Controller Unit (MCU)
+
+Required properties:
+- compatible : "fsl,<mcu-chip>-<board>", "fsl,mcu-mpc8349emitx".
+- reg : should specify I2C address (0x0a).
+- #gpio-cells : should be 2.
+- gpio-controller : should be present.
+
+Example:
+
+mcu@a {
+	#gpio-cells = <2>;
+	compatible = "fsl,mc9s08qg8-mpc8349emitx",
+		     "fsl,mcu-mpc8349emitx";
+	reg = <0x0a>;
+	gpio-controller;
+};
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/mpc5121-psc.txt b/Documentation/devicetree/bindings/powerpc/fsl/mpc5121-psc.txt
new file mode 100644
index 000000000..5dfd68f1a
--- /dev/null
+++ b/Documentation/devicetree/bindings/powerpc/fsl/mpc5121-psc.txt
@@ -0,0 +1,78 @@
+MPC5121 PSC Device Tree Bindings
+
+PSC in UART mode
+----------------
+
+For PSC in UART mode the needed PSC serial devices
+are specified by fsl,mpc5121-psc-uart nodes in the
+fsl,mpc5121-immr SoC node. Additionally the PSC FIFO
+Controller node fsl,mpc5121-psc-fifo is required there:
+
+fsl,mpc512x-psc-uart nodes
+--------------------------
+
+Required properties :
+ - compatible : Should contain "fsl,<soc>-psc-uart" and "fsl,<soc>-psc"
+   Supported <soc>s: mpc5121, mpc5125
+ - reg : Offset and length of the register set for the PSC device
+ - interrupts : <a b> where a is the interrupt number of the
+   PSC FIFO Controller and b is a field that represents an
+   encoding of the sense and level information for the interrupt.
+
+Recommended properties :
+ - fsl,rx-fifo-size : the size of the RX fifo slice (a multiple of 4)
+ - fsl,tx-fifo-size : the size of the TX fifo slice (a multiple of 4)
+
+PSC in SPI mode
+---------------
+
+Similar to the UART mode a PSC can be operated in SPI mode. The compatible used
+for that is fsl,mpc5121-psc-spi. It requires a fsl,mpc5121-psc-fifo as well.
+The required and recommended properties are identical to the
+fsl,mpc5121-psc-uart nodes, just use spi instead of uart in the compatible
+string.
+
+fsl,mpc512x-psc-fifo node
+-------------------------
+
+Required properties :
+ - compatible : Should be "fsl,<soc>-psc-fifo"
+   Supported <soc>s: mpc5121, mpc5125
+ - reg : Offset and length of the register set for the PSC
+         FIFO Controller
+ - interrupts : <a b> where a is the interrupt number of the
+   PSC FIFO Controller and b is a field that represents an
+   encoding of the sense and level information for the interrupt.
+
+Recommended properties :
+ - clocks : specifies the clock needed to operate the fifo controller
+ - clock-names : name(s) for the clock(s) listed in clocks
+
+Example for a board using PSC0 and PSC1 devices in serial mode:
+
+serial@11000 {
+	compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
+	cell-index = <0>;
+	reg = <0x11000 0x100>;
+	interrupts = <40 0x8>;
+	interrupt-parent = < &ipic >;
+	fsl,rx-fifo-size = <16>;
+	fsl,tx-fifo-size = <16>;
+};
+
+serial@11100 {
+	compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
+	cell-index = <1>;
+	reg = <0x11100 0x100>;
+	interrupts = <40 0x8>;
+	interrupt-parent = < &ipic >;
+	fsl,rx-fifo-size = <16>;
+	fsl,tx-fifo-size = <16>;
+};
+
+pscfifo@11f00 {
+	compatible = "fsl,mpc5121-psc-fifo";
+	reg = <0x11f00 0x100>;
+	interrupts = <40 0x8>;
+	interrupt-parent = < &ipic >;
+};
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/mpc512x_lpbfifo.txt b/Documentation/devicetree/bindings/powerpc/fsl/mpc512x_lpbfifo.txt
new file mode 100644
index 000000000..b3b392fe1
--- /dev/null
+++ b/Documentation/devicetree/bindings/powerpc/fsl/mpc512x_lpbfifo.txt
@@ -0,0 +1,21 @@
+Freescale MPC512x LocalPlus Bus FIFO (called SCLPC in the Reference Manual)
+
+Required properties:
+- compatible: should be "fsl,mpc512x-lpbfifo";
+- reg: should contain the offset and length of SCLPC register set;
+- interrupts: should contain the interrupt specifier for SCLPC; syntax of an
+    interrupt client node is described in interrupt-controller/interrupts.txt;
+- dmas: should contain the DMA specifier for SCLPC as described at
+    dma/dma.txt and dma/mpc512x-dma.txt;
+- dma-names: should be "rx-tx";
+
+Example:
+
+	sclpc@10100 {
+		compatible = "fsl,mpc512x-lpbfifo";
+		reg = <0x10100 0x50>;
+		interrupts = <7 0x8>;
+		dmas = <&dma0 26>;
+		dma-names = "rx-tx";
+	};
+
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/mpc5200.txt b/Documentation/devicetree/bindings/powerpc/fsl/mpc5200.txt
new file mode 100644
index 000000000..d096cf461
--- /dev/null
+++ b/Documentation/devicetree/bindings/powerpc/fsl/mpc5200.txt
@@ -0,0 +1,198 @@
+MPC5200 Device Tree Bindings
+----------------------------
+
+(c) 2006-2009 Secret Lab Technologies Ltd
+Grant Likely <grant.likely@secretlab.ca>
+
+Naming conventions
+------------------
+For mpc5200 on-chip devices, the format for each compatible value is
+<chip>-<device>[-<mode>].  The OS should be able to match a device driver
+to the device based solely on the compatible value.  If two drivers
+match on the compatible list; the 'most compatible' driver should be
+selected.
+
+The split between the MPC5200 and the MPC5200B leaves a bit of a
+conundrum.  How should the compatible property be set up to provide
+maximum compatibility information; but still accurately describe the
+chip?  For the MPC5200; the answer is easy.  Most of the SoC devices
+originally appeared on the MPC5200.  Since they didn't exist anywhere
+else; the 5200 compatible properties will contain only one item;
+"fsl,mpc5200-<device>".
+
+The 5200B is almost the same as the 5200, but not quite.  It fixes
+silicon bugs and it adds a small number of enhancements.  Most of the
+devices either provide exactly the same interface as on the 5200.  A few
+devices have extra functions but still have a backwards compatible mode.
+To express this information as completely as possible, 5200B device trees
+should have two items in the compatible list:
+	compatible = "fsl,mpc5200b-<device>","fsl,mpc5200-<device>";
+
+It is *strongly* recommended that 5200B device trees follow this convention
+(instead of only listing the base mpc5200 item).
+
+ie. ethernet on mpc5200: compatible = "fsl,mpc5200-fec";
+    ethernet on mpc5200b: compatible = "fsl,mpc5200b-fec", "fsl,mpc5200-fec";
+
+Modal devices, like PSCs, also append the configured function to the
+end of the compatible field.  ie. A PSC in i2s mode would specify
+"fsl,mpc5200-psc-i2s", not "fsl,mpc5200-i2s".  This convention is chosen to
+avoid naming conflicts with non-psc devices providing the same
+function.  For example, "fsl,mpc5200-spi" and "fsl,mpc5200-psc-spi" describe
+the mpc5200 simple spi device and a PSC spi mode respectively.
+
+At the time of writing, exact chip may be either 'fsl,mpc5200' or
+'fsl,mpc5200b'.
+
+The soc node
+------------
+This node describes the on chip SOC peripherals.  Every mpc5200 based
+board will have this node, and as such there is a common naming
+convention for SOC devices.
+
+Required properties:
+name			description
+----			-----------
+ranges			Memory range of the internal memory mapped registers.
+			Should be <0 [baseaddr] 0xc000>
+reg			Should be <[baseaddr] 0x100>
+compatible		mpc5200: "fsl,mpc5200-immr"
+			mpc5200b: "fsl,mpc5200b-immr"
+system-frequency	'fsystem' frequency in Hz; XLB, IPB, USB and PCI
+			clocks are derived from the fsystem clock.
+bus-frequency		IPB bus frequency in Hz.  Clock rate
+			used by most of the soc devices.
+
+soc child nodes
+---------------
+Any on chip SOC devices available to Linux must appear as soc5200 child nodes.
+
+Note: The tables below show the value for the mpc5200.  A mpc5200b device
+tree should use the "fsl,mpc5200b-<device>","fsl,mpc5200-<device>" form.
+
+Required soc5200 child nodes:
+name				compatible		Description
+----				----------		-----------
+cdm@<addr>			fsl,mpc5200-cdm		Clock Distribution
+interrupt-controller@<addr>	fsl,mpc5200-pic		need an interrupt
+							controller to boot
+bestcomm@<addr>			fsl,mpc5200-bestcomm	Bestcomm DMA controller
+
+Recommended soc5200 child nodes; populate as needed for your board
+name		compatible		Description
+----		----------		-----------
+timer@<addr>	fsl,mpc5200-gpt		 General purpose timers
+gpio@<addr>	fsl,mpc5200-gpio	 MPC5200 simple gpio controller
+gpio@<addr>	fsl,mpc5200-gpio-wkup	 MPC5200 wakeup gpio controller
+rtc@<addr>	fsl,mpc5200-rtc		 Real time clock
+mscan@<addr>	fsl,mpc5200-mscan	 CAN bus controller
+pci@<addr>	fsl,mpc5200-pci		 PCI bridge
+serial@<addr>	fsl,mpc5200-psc-uart	 PSC in serial mode
+i2s@<addr>	fsl,mpc5200-psc-i2s	 PSC in i2s mode
+ac97@<addr>	fsl,mpc5200-psc-ac97	 PSC in ac97 mode
+spi@<addr>	fsl,mpc5200-psc-spi	 PSC in spi mode
+irda@<addr>	fsl,mpc5200-psc-irda	 PSC in IrDA mode
+spi@<addr>	fsl,mpc5200-spi		 MPC5200 spi device
+ethernet@<addr>	fsl,mpc5200-fec		 MPC5200 ethernet device
+ata@<addr>	fsl,mpc5200-ata		 IDE ATA interface
+i2c@<addr>	fsl,mpc5200-i2c		 I2C controller
+usb@<addr>	fsl,mpc5200-ohci,ohci-be USB controller
+xlb@<addr>	fsl,mpc5200-xlb		 XLB arbitrator
+
+fsl,mpc5200-gpt nodes
+---------------------
+On the mpc5200 and 5200b, GPT0 has a watchdog timer function.  If the board
+design supports the internal wdt, then the device node for GPT0 should
+include the empty property 'fsl,has-wdt'.  Note that this does not activate
+the watchdog.  The timer will function as a GPT if the timer api is used, and
+it will function as watchdog if the watchdog device is used.  The watchdog
+mode has priority over the gpt mode, i.e. if the watchdog is activated, any
+gpt api call to this timer will fail with -EBUSY.
+
+If you add the property
+	fsl,wdt-on-boot = <n>;
+GPT0 will be marked as in-use watchdog, i.e. blocking every gpt access to it.
+If n>0, the watchdog is started with a timeout of n seconds.  If n=0, the
+configuration of the watchdog is not touched.  This is useful in two cases:
+- just mark GPT0 as watchdog, blocking gpt accesses, and configure it later;
+- do not touch a configuration assigned by the boot loader which supervises
+  the boot process itself.
+
+The watchdog will respect the CONFIG_WATCHDOG_NOWAYOUT option.
+
+An mpc5200-gpt can be used as a single line GPIO controller.  To do so,
+add the following properties to the gpt node:
+	gpio-controller;
+	#gpio-cells = <2>;
+When referencing the GPIO line from another node, the first cell must always
+be zero and the second cell represents the gpio flags and described in the
+gpio device tree binding.
+
+An mpc5200-gpt can be used as a single line edge sensitive interrupt
+controller.  To do so, add the following properties to the gpt node:
+	interrupt-controller;
+	#interrupt-cells = <1>;
+When referencing the IRQ line from another node, the cell represents the
+sense mode; 1 for edge rising, 2 for edge falling.
+
+fsl,mpc5200-psc nodes
+---------------------
+The PSCs should include a cell-index which is the index of the PSC in
+hardware.  cell-index is used to determine which shared SoC registers to
+use when setting up PSC clocking.  cell-index number starts at '0'.  ie:
+	PSC1 has 'cell-index = <0>'
+	PSC4 has 'cell-index = <3>'
+
+PSC in i2s mode:  The mpc5200 and mpc5200b PSCs are not compatible when in
+i2s mode.  An 'mpc5200b-psc-i2s' node cannot include 'mpc5200-psc-i2s' in the
+compatible field.
+
+
+fsl,mpc5200-gpio and fsl,mpc5200-gpio-wkup nodes
+------------------------------------------------
+Each GPIO controller node should have the empty property gpio-controller and
+#gpio-cells set to 2. First cell is the GPIO number which is interpreted
+according to the bit numbers in the GPIO control registers. The second cell
+is for flags which is currently unused.
+
+fsl,mpc5200-fec nodes
+---------------------
+The FEC node can specify one of the following properties to configure
+the MII link:
+- fsl,7-wire-mode - An empty property that specifies the link uses 7-wire
+                    mode instead of MII
+- current-speed   - Specifies that the MII should be configured for a fixed
+                    speed.  This property should contain two cells.  The
+                    first cell specifies the speed in Mbps and the second
+                    should be '0' for half duplex and '1' for full duplex
+- phy-handle      - Contains a phandle to an Ethernet PHY.
+
+Interrupt controller (fsl,mpc5200-pic) node
+-------------------------------------------
+The mpc5200 pic binding splits hardware IRQ numbers into two levels.  The
+split reflects the layout of the PIC hardware itself, which groups
+interrupts into one of three groups; CRIT, MAIN or PERP.  Also, the
+Bestcomm dma engine has it's own set of interrupt sources which are
+cascaded off of peripheral interrupt 0, which the driver interprets as a
+fourth group, SDMA.
+
+The interrupts property for device nodes using the mpc5200 pic consists
+of three cells; <L1 L2 level>
+
+    L1 := [CRIT=0, MAIN=1, PERP=2, SDMA=3]
+    L2 := interrupt number; directly mapped from the value in the
+          "ICTL PerStat, MainStat, CritStat Encoded Register"
+    level := [LEVEL_HIGH=0, EDGE_RISING=1, EDGE_FALLING=2, LEVEL_LOW=3]
+
+For external IRQs, use the following interrupt property values (how to
+specify external interrupts is a frequently asked question):
+External interrupts:
+	external irq0:	interrupts = <0 0 n>;
+	external irq1:	interrupts = <1 1 n>;
+	external irq2:	interrupts = <1 2 n>;
+	external irq3:	interrupts = <1 3 n>;
+'n' is sense (0: level high, 1: edge rising, 2: edge falling 3: level low)
+
+fsl,mpc5200-mscan nodes
+-----------------------
+See file Documentation/devicetree/bindings/powerpc/fsl/mpc5200.txt
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/mpic-msgr.txt b/Documentation/devicetree/bindings/powerpc/fsl/mpic-msgr.txt
new file mode 100644
index 000000000..bc8ded641
--- /dev/null
+++ b/Documentation/devicetree/bindings/powerpc/fsl/mpic-msgr.txt
@@ -0,0 +1,63 @@
+* FSL MPIC Message Registers
+
+This binding specifies what properties must be available in the device tree
+representation of the message register blocks found in some FSL MPIC
+implementations.
+
+Required properties:
+
+    - compatible: Specifies the compatibility list for the message register
+      block.  The type shall be <string-list> and the value shall be of the form
+      "fsl,mpic-v<version>-msgr", where <version> is the version number of
+      the MPIC containing the message registers.
+
+    - reg: Specifies the base physical address(s) and size(s) of the
+      message register block's addressable register space.  The type shall be
+      <prop-encoded-array>.
+
+    - interrupts: Specifies a list of interrupt-specifiers which are available
+      for receiving interrupts. Interrupt-specifier consists of two cells: first
+      cell is interrupt-number and second cell is level-sense. The type shall be
+      <prop-encoded-array>.
+
+Optional properties:
+
+    - mpic-msgr-receive-mask: Specifies what registers in the containing block
+      are allowed to receive interrupts. The value is a bit mask where a set
+      bit at bit 'n' indicates that message register 'n' can receive interrupts.
+      Note that "bit 'n'" is numbered from LSB for PPC hardware. The type shall
+      be <u32>. If not present, then all of the message registers in the block
+      are available.
+
+Aliases:
+
+    An alias should be created for every message register block.  They are not
+    required, though.  However, a particular implementation of this binding
+    may require aliases to be present.  Aliases are of the form
+    'mpic-msgr-block<n>', where <n> is an integer specifying the block's number.
+    Numbers shall start at 0.
+
+Example:
+
+	aliases {
+		mpic-msgr-block0 = &mpic_msgr_block0;
+		mpic-msgr-block1 = &mpic_msgr_block1;
+	};
+
+	mpic_msgr_block0: mpic-msgr-block@41400 {
+		compatible = "fsl,mpic-v3.1-msgr";
+		reg = <0x41400 0x200>;
+		// Message registers 0 and 2 in this block can receive interrupts on
+		// sources 0xb0 and 0xb2, respectively.
+		interrupts = <0xb0 2 0xb2 2>;
+		mpic-msgr-receive-mask = <0x5>;
+	};
+
+	mpic_msgr_block1: mpic-msgr-block@42400 {
+		compatible = "fsl,mpic-v3.1-msgr";
+		reg = <0x42400 0x200>;
+		// Message registers 0 and 2 in this block can receive interrupts on
+		// sources 0xb4 and 0xb6, respectively.
+		interrupts = <0xb4 2 0xb6 2>;
+		mpic-msgr-receive-mask = <0x5>;
+	};
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/mpic-timer.txt b/Documentation/devicetree/bindings/powerpc/fsl/mpic-timer.txt
new file mode 100644
index 000000000..df4195814
--- /dev/null
+++ b/Documentation/devicetree/bindings/powerpc/fsl/mpic-timer.txt
@@ -0,0 +1,38 @@
+* Freescale MPIC timers
+
+Required properties:
+- compatible: "fsl,mpic-global-timer"
+
+- reg : Contains two regions.  The first is the main timer register bank
+  (GTCCRxx, GTBCRxx, GTVPRxx, GTDRxx).  The second is the timer control
+  register (TCRx) for the group.
+
+- fsl,available-ranges: use <start count> style section to define which
+  timer interrupts can be used.  This property is optional; without this,
+  all timers within the group can be used.
+
+- interrupts: one interrupt per timer in the group, in order, starting
+  with timer zero.  If timer-available-ranges is present, only the
+  interrupts that correspond to available timers shall be present.
+
+Example:
+	/* Note that this requires #interrupt-cells to be 4 */
+	timer0: timer@41100 {
+		compatible = "fsl,mpic-global-timer";
+		reg = <0x41100 0x100 0x41300 4>;
+
+		/* Another AMP partition is using timers 0 and 1 */
+		fsl,available-ranges = <2 2>;
+
+		interrupts = <2 0 3 0
+		              3 0 3 0>;
+	};
+
+	timer1: timer@42100 {
+		compatible = "fsl,mpic-global-timer";
+		reg = <0x42100 0x100 0x42300 4>;
+		interrupts = <4 0 3 0
+		              5 0 3 0
+		              6 0 3 0
+		              7 0 3 0>;
+	};
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/mpic.txt b/Documentation/devicetree/bindings/powerpc/fsl/mpic.txt
new file mode 100644
index 000000000..dc5744636
--- /dev/null
+++ b/Documentation/devicetree/bindings/powerpc/fsl/mpic.txt
@@ -0,0 +1,231 @@
+=====================================================================
+Freescale MPIC Interrupt Controller Node
+Copyright (C) 2010,2011 Freescale Semiconductor Inc.
+=====================================================================
+
+The Freescale MPIC interrupt controller is found on all PowerQUICC
+and QorIQ processors and is compatible with the Open PIC.  The
+notable difference from Open PIC binding is the addition of 2
+additional cells in the interrupt specifier defining interrupt type
+information.
+
+PROPERTIES
+
+  - compatible
+      Usage: required
+      Value type: <string>
+      Definition: Shall include "fsl,mpic".  Freescale MPIC
+          controllers compatible with this binding have Block
+          Revision Registers BRR1 and BRR2 at offset 0x0 and
+          0x10 in the MPIC.
+
+  - reg
+      Usage: required
+      Value type: <prop-encoded-array>
+      Definition: A standard property.  Specifies the physical
+          offset and length of the device's registers within the
+          CCSR address space.
+
+  - interrupt-controller
+      Usage: required
+      Value type: <empty>
+      Definition: Specifies that this node is an interrupt
+          controller
+
+  - #interrupt-cells
+      Usage: required
+      Value type: <u32>
+      Definition: Shall be 2 or 4.  A value of 2 means that interrupt
+          specifiers do not contain the interrupt-type or type-specific
+          information cells.
+
+  - #address-cells
+      Usage: required
+      Value type: <u32>
+      Definition: Shall be 0.
+
+  - pic-no-reset
+      Usage: optional
+      Value type: <empty>
+      Definition: The presence of this property specifies that the
+          MPIC must not be reset by the client program, and that
+          the boot program has initialized all interrupt source
+          configuration registers to a sane state-- masked or
+          directed at other cores.  This ensures that the client
+          program will not receive interrupts for sources not belonging
+          to the client.  The presence of this property also mandates
+          that any initialization related to interrupt sources shall
+          be limited to sources explicitly referenced in the device tree.
+
+  - big-endian
+      Usage: optional
+      Value type: <empty>
+          If present the MPIC will be assumed to be big-endian.  Some
+          device-trees omit this property on MPIC nodes even when the MPIC is
+          in fact big-endian, so certain boards override this property.
+
+  - single-cpu-affinity
+      Usage: optional
+      Value type: <empty>
+          If present the MPIC will be assumed to only be able to route
+          non-IPI interrupts to a single CPU at a time (EG: Freescale MPIC).
+
+  - last-interrupt-source
+      Usage: optional
+      Value type: <u32>
+          Some MPICs do not correctly report the number of hardware sources
+          in the global feature registers.  If specified, this field will
+          override the value read from MPIC_GREG_FEATURE_LAST_SRC.
+
+INTERRUPT SPECIFIER DEFINITION
+
+  Interrupt specifiers consists of 4 cells encoded as
+  follows:
+
+   <1st-cell>   interrupt-number
+
+                Identifies the interrupt source.  The meaning
+                depends on the type of interrupt.
+
+                Note: If the interrupt-type cell is undefined
+                (i.e. #interrupt-cells = 2), this cell
+                should be interpreted the same as for
+                interrupt-type 0-- i.e. an external or
+                normal SoC device interrupt.
+
+   <2nd-cell>   level-sense information, encoded as follows:
+                    0 = low-to-high edge triggered
+                    1 = active low level-sensitive
+                    2 = active high level-sensitive
+                    3 = high-to-low edge triggered
+
+   <3rd-cell>   interrupt-type
+
+                The following types are supported:
+
+                  0 = external or normal SoC device interrupt
+
+                      The interrupt-number cell contains
+                      the SoC device interrupt number.  The
+                      type-specific cell is undefined.  The
+                      interrupt-number is derived from the
+                      MPIC a block of registers referred to as
+                      the "Interrupt Source Configuration Registers".
+                      Each source has 32-bytes of registers
+                      (vector/priority and destination) in this
+                      region.   So interrupt 0 is at offset 0x0,
+                      interrupt 1 is at offset 0x20, and so on.
+
+                  1 = error interrupt
+
+                      The interrupt-number cell contains
+                      the SoC device interrupt number for
+                      the error interrupt.  The type-specific
+                      cell identifies the specific error
+                      interrupt number.
+
+                  2 = MPIC inter-processor interrupt (IPI)
+
+                      The interrupt-number cell identifies
+                      the MPIC IPI number.  The type-specific
+                      cell is undefined.
+
+                  3 = MPIC timer interrupt
+
+                      The interrupt-number cell identifies
+                      the MPIC timer number.  The type-specific
+                      cell is undefined.
+
+   <4th-cell>   type-specific information
+
+                The type-specific cell is encoded as follows:
+
+                 - For interrupt-type 1 (error interrupt),
+                   the type-specific cell contains the
+                   bit number of the error interrupt in the
+                   Error Interrupt Summary Register.
+
+EXAMPLE 1
+	/*
+	 * mpic interrupt controller with 4 cells per specifier
+	 */
+	mpic: pic@40000 {
+		compatible = "fsl,mpic";
+		interrupt-controller;
+		#interrupt-cells = <4>;
+		#address-cells = <0>;
+		reg = <0x40000 0x40000>;
+	};
+
+EXAMPLE 2
+	/*
+	 * The MPC8544 I2C controller node has an internal
+	 * interrupt number of 27.  As per the reference manual
+	 * this corresponds to interrupt source configuration
+	 * registers at 0x5_0560.
+	 *
+	 * The interrupt source configuration registers begin
+	 * at 0x5_0000.
+	 *
+	 * To compute the interrupt specifier interrupt number
+         *
+	 *       0x560 >> 5 = 43
+	 *
+	 * The interrupt source configuration registers begin
+	 * at 0x5_0000, and so the i2c vector/priority registers
+	 * are at 0x5_0560.
+	 */
+	i2c@3000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cell-index = <0>;
+		compatible = "fsl-i2c";
+		reg = <0x3000 0x100>;
+		interrupts = <43 2>;
+		interrupt-parent = <&mpic>;
+		dfsrr;
+	};
+
+
+EXAMPLE 3
+	/*
+	 *  Definition of a node defining the 4
+	 *  MPIC IPI interrupts.  Note the interrupt
+	 *  type of 2.
+	 */
+	ipi@410a0 {
+		compatible = "fsl,mpic-ipi";
+		reg = <0x40040 0x10>;
+		interrupts = <0 0 2 0
+		              1 0 2 0
+		              2 0 2 0
+		              3 0 2 0>;
+	};
+
+EXAMPLE 4
+	/*
+	 *  Definition of a node defining the MPIC
+	 *  global timers.  Note the interrupt
+	 *  type of 3.
+	 */
+	timer0: timer@41100 {
+		compatible = "fsl,mpic-global-timer";
+		reg = <0x41100 0x100 0x41300 4>;
+		interrupts = <0 0 3 0
+		              1 0 3 0
+		              2 0 3 0
+		              3 0 3 0>;
+	};
+
+EXAMPLE 5
+	/*
+	 * Definition of an error interrupt (interrupt type 1).
+	 * SoC interrupt number is 16 and the specific error
+         * interrupt bit in the error interrupt summary register
+	 * is 23.
+	 */
+	memory-controller@8000 {
+		compatible = "fsl,p4080-memory-controller";
+		reg = <0x8000 0x1000>;
+		interrupts = <16 2 1 23>;
+	};
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/msi-pic.txt b/Documentation/devicetree/bindings/powerpc/fsl/msi-pic.txt
new file mode 100644
index 000000000..f8d2b7fe0
--- /dev/null
+++ b/Documentation/devicetree/bindings/powerpc/fsl/msi-pic.txt
@@ -0,0 +1,111 @@
+* Freescale MSI interrupt controller
+
+Required properties:
+- compatible : compatible list, may contain one or two entries
+  The first is "fsl,CHIP-msi", where CHIP is the processor(mpc8610, mpc8572,
+  etc.) and the second is "fsl,mpic-msi" or "fsl,ipic-msi" or
+  "fsl,mpic-msi-v4.3" depending on the parent type and version. If mpic
+  version is 4.3, the number of MSI registers is increased to 16, MSIIR1 is
+  provided to access these 16 registers, and compatible "fsl,mpic-msi-v4.3"
+  should be used. The first entry is optional; the second entry is
+  required.
+
+- reg : It may contain one or two regions. The first region should contain
+  the address and the length of the shared message interrupt register set.
+  The second region should contain the address of aliased MSIIR or MSIIR1
+  register for platforms that have such an alias, if using MSIIR1, the second
+  region must be added because different MSI group has different MSIIR1 offset.
+
+- interrupts : each one of the interrupts here is one entry per 32 MSIs,
+  and routed to the host interrupt controller. the interrupts should
+  be set as edge sensitive.  If msi-available-ranges is present, only
+  the interrupts that correspond to available ranges shall be present.
+
+Optional properties:
+- msi-available-ranges: use <start count> style section to define which
+  msi interrupt can be used in the 256 msi interrupts. This property is
+  optional, without this, all the MSI interrupts can be used.
+  Each available range must begin and end on a multiple of 32 (i.e.
+  no splitting an individual MSI register or the associated PIC interrupt).
+  MPIC v4.3 does not support this property because the 32 interrupts of an
+  individual register are not continuous when using MSIIR1.
+
+- msi-address-64: 64-bit PCI address of the MSIIR register. The MSIIR register
+  is used for MSI messaging.  The address of MSIIR in PCI address space is
+  the MSI message address.
+
+  This property may be used in virtualized environments where the hypervisor
+  has created an alternate mapping for the MSIR block.  See below for an
+  explanation.
+
+
+Example:
+	msi@41600 {
+		compatible = "fsl,mpc8610-msi", "fsl,mpic-msi";
+		reg = <0x41600 0x80>;
+		msi-available-ranges = <0 0x100>;
+		interrupts = <
+			0xe0 0
+			0xe1 0
+			0xe2 0
+			0xe3 0
+			0xe4 0
+			0xe5 0
+			0xe6 0
+			0xe7 0>;
+		interrupt-parent = <&mpic>;
+	};
+
+	msi@41600 {
+		compatible = "fsl,mpic-msi-v4.3";
+		reg = <0x41600 0x200 0x44148 4>;
+		interrupts = <
+			0xe0 0 0 0
+			0xe1 0 0 0
+			0xe2 0 0 0
+			0xe3 0 0 0
+			0xe4 0 0 0
+			0xe5 0 0 0
+			0xe6 0 0 0
+			0xe7 0 0 0
+			0x100 0 0 0
+			0x101 0 0 0
+			0x102 0 0 0
+			0x103 0 0 0
+			0x104 0 0 0
+			0x105 0 0 0
+			0x106 0 0 0
+			0x107 0 0 0>;
+	};
+
+The Freescale hypervisor and msi-address-64
+-------------------------------------------
+Normally, PCI devices have access to all of CCSR via an ATMU mapping.  The
+Freescale MSI driver calculates the address of MSIIR (in the MSI register
+block) and sets that address as the MSI message address.
+
+In a virtualized environment, the hypervisor may need to create an IOMMU
+mapping for MSIIR.  The Freescale ePAPR hypervisor has this requirement
+because of hardware limitations of the Peripheral Access Management Unit
+(PAMU), which is currently the only IOMMU that the hypervisor supports.
+The ATMU is programmed with the guest physical address, and the PAMU
+intercepts transactions and reroutes them to the true physical address.
+
+In the PAMU, each PCI controller is given only one primary window.  The
+PAMU restricts DMA operations so that they can only occur within a window.
+Because PCI devices must be able to DMA to memory, the primary window must
+be used to cover all of the guest's memory space.
+
+PAMU primary windows can be divided into 256 subwindows, and each
+subwindow can have its own address mapping ("guest physical" to "true
+physical").  However, each subwindow has to have the same alignment, which
+means they cannot be located at just any address.  Because of these
+restrictions, it is usually impossible to create a 4KB subwindow that
+covers MSIIR where it's normally located.
+
+Therefore, the hypervisor has to create a subwindow inside the same
+primary window used for memory, but mapped to the MSIR block (where MSIIR
+lives).  The first subwindow after the end of guest memory is used for
+this.  The address specified in the msi-address-64 property is the PCI
+address of MSIIR.  The hypervisor configures the PAMU to map that address to
+the true physical address of MSIIR.
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/pamu.txt b/Documentation/devicetree/bindings/powerpc/fsl/pamu.txt
new file mode 100644
index 000000000..b21ab85de
--- /dev/null
+++ b/Documentation/devicetree/bindings/powerpc/fsl/pamu.txt
@@ -0,0 +1,148 @@
+Freescale Peripheral Management Access Unit (PAMU) Device Tree Binding
+
+DESCRIPTION
+
+The PAMU is an I/O MMU that provides device-to-memory access control and
+address translation capabilities.
+
+Required properties:
+
+- compatible	: <string>
+		  First entry is a version-specific string, such as
+		  "fsl,pamu-v1.0".  The second is "fsl,pamu".
+- ranges	: <prop-encoded-array>
+		  A standard property. Utilized to describe the memory mapped
+		  I/O space utilized by the controller.  The size should
+		  be set to the total size of the register space of all
+		  physically present PAMU controllers.  For example, for
+		  PAMU v1.0, on an SOC that has five PAMU devices, the size
+		  is 0x5000.
+- interrupts	: <prop-encoded-array>
+		  Interrupt mappings.  The first tuple is the normal PAMU
+		  interrupt, used for reporting access violations.  The second
+		  is for PAMU hardware errors, such as PAMU operation errors
+		  and ECC errors.
+- #address-cells: <u32>
+		  A standard property.
+- #size-cells	: <u32>
+		  A standard property.
+
+Optional properties:
+- reg		: <prop-encoded-array>
+		  A standard property.   It represents the CCSR registers of
+		  all child PAMUs combined.  Include it to provide support
+		  for legacy drivers.
+- fsl,portid-mapping : <u32>
+		  The Coherency Subdomain ID Port Mapping Registers and
+		  Snoop ID Port Mapping registers, which are part of the
+		  CoreNet Coherency fabric (CCF), provide a CoreNet
+		  Coherency Subdomain ID/CoreNet Snoop ID to pamu mapping
+		  functions.  Certain bits from these registers should be
+		  set if PAMUs should be snooped.  This property defines
+		  a bitmask which selects the bits that should be set if
+		  PAMUs should be snooped.
+
+Child nodes:
+
+Each child node represents one PAMU controller.  Each SOC device that is
+connected to a specific PAMU device should have a "fsl,pamu-phandle" property
+that links to the corresponding specific child PAMU controller.
+
+- reg		: <prop-encoded-array>
+		  A standard property.  Specifies the physical address and
+		  length (relative to the parent 'ranges' property) of this
+		  PAMU controller's configuration registers.  The size should
+		  be set to the size of this PAMU controllers's register space.
+		  For PAMU v1.0, this size is 0x1000.
+- fsl,primary-cache-geometry
+		: <prop-encoded-array>
+		  Two cells that specify the geometry of the primary PAMU
+		  cache.  The first is the number of cache lines, and the
+		  second is the number of "ways".  For direct-mapped caches,
+		  specify a value of 1.
+- fsl,secondary-cache-geometry
+		: <prop-encoded-array>
+		  Two cells that specify the geometry of the secondary PAMU
+		  cache.  The first is the number of cache lines, and the
+		  second is the number of "ways".  For direct-mapped caches,
+		  specify a value of 1.
+
+Device nodes:
+
+Devices that have LIODNs need to specify links to the parent PAMU controller
+(the actual PAMU controller that this device is connected to) and a pointer to
+the LIODN register, if applicable.
+
+- fsl,iommu-parent
+		: <phandle>
+		Phandle to the single, specific PAMU controller node to which
+		this device is connect.  The PAMU topology is represented in
+		the device tree to assist code that dynamically determines the
+		best LIODN values to minimize PAMU cache thrashing.
+
+- fsl,liodn-reg : <prop-encoded-array>
+		  Two cells that specify the location of the LIODN register
+		  for this device.  Required for devices that have a single
+		  LIODN.  The first cell is a phandle to a node that contains
+		  the registers where the LIODN is to be set.  The second is
+		  the offset from the first "reg" resource of the node where
+		  the specific LIODN register is located.
+
+
+Example:
+
+	iommu@20000 {
+		compatible = "fsl,pamu-v1.0", "fsl,pamu";
+		reg = <0x20000 0x5000>;
+		ranges = <0 0x20000 0x5000>;
+		fsl,portid-mapping = <0xf80000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		interrupts = <
+			24 2 0 0
+			16 2 1 30>;
+
+		pamu0: pamu@0 {
+			reg = <0 0x1000>;
+			fsl,primary-cache-geometry = <32 1>;
+			fsl,secondary-cache-geometry = <128 2>;
+		};
+
+		pamu1: pamu@1000 {
+			reg = <0x1000 0x1000>;
+			fsl,primary-cache-geometry = <32 1>;
+			fsl,secondary-cache-geometry = <128 2>;
+		};
+
+		pamu2: pamu@2000 {
+			reg = <0x2000 0x1000>;
+			fsl,primary-cache-geometry = <32 1>;
+			fsl,secondary-cache-geometry = <128 2>;
+		};
+
+		pamu3: pamu@3000 {
+			reg = <0x3000 0x1000>;
+			fsl,primary-cache-geometry = <32 1>;
+			fsl,secondary-cache-geometry = <128 2>;
+		};
+
+		pamu4: pamu@4000 {
+			reg = <0x4000 0x1000>;
+			fsl,primary-cache-geometry = <32 1>;
+			fsl,secondary-cache-geometry = <128 2>;
+		};
+	};
+
+	guts: global-utilities@e0000 {
+		compatible = "fsl,qoriq-device-config-1.0";
+		reg = <0xe0000 0xe00>;
+		fsl,has-rstcr;
+		#sleep-cells = <1>;
+		fsl,liodn-bits = <12>;
+	};
+
+/include/ "qoriq-dma-0.dtsi"
+	dma@100300 {
+		fsl,iommu-parent = <&pamu0>;
+		fsl,liodn-reg = <&guts 0x584>; /* DMA2LIODNR */
+	};
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/pmc.txt b/Documentation/devicetree/bindings/powerpc/fsl/pmc.txt
new file mode 100644
index 000000000..07256b7ff
--- /dev/null
+++ b/Documentation/devicetree/bindings/powerpc/fsl/pmc.txt
@@ -0,0 +1,63 @@
+* Power Management Controller
+
+Properties:
+- compatible: "fsl,<chip>-pmc".
+
+  "fsl,mpc8349-pmc" should be listed for any chip whose PMC is
+  compatible.  "fsl,mpc8313-pmc" should also be listed for any chip
+  whose PMC is compatible, and implies deep-sleep capability.
+
+  "fsl,mpc8548-pmc" should be listed for any chip whose PMC is
+  compatible.  "fsl,mpc8536-pmc" should also be listed for any chip
+  whose PMC is compatible, and implies deep-sleep capability.
+
+  "fsl,mpc8641d-pmc" should be listed for any chip whose PMC is
+  compatible; all statements below that apply to "fsl,mpc8548-pmc" also
+  apply to "fsl,mpc8641d-pmc".
+
+  Compatibility does not include bit assignments in SCCR/PMCDR/DEVDISR; these
+  bit assignments are indicated via the sleep specifier in each device's
+  sleep property.
+
+- reg: For devices compatible with "fsl,mpc8349-pmc", the first resource
+  is the PMC block, and the second resource is the Clock Configuration
+  block.
+
+  For devices compatible with "fsl,mpc8548-pmc", the first resource
+  is a 32-byte block beginning with DEVDISR.
+
+- interrupts: For "fsl,mpc8349-pmc"-compatible devices, the first
+  resource is the PMC block interrupt.
+
+- fsl,mpc8313-wakeup-timer: For "fsl,mpc8313-pmc"-compatible devices,
+  this is a phandle to an "fsl,gtm" node on which timer 4 can be used as
+  a wakeup source from deep sleep.
+
+Sleep specifiers:
+
+  fsl,mpc8349-pmc: Sleep specifiers consist of one cell.  For each bit
+  that is set in the cell, the corresponding bit in SCCR will be saved
+  and cleared on suspend, and restored on resume.  This sleep controller
+  supports disabling and resuming devices at any time.
+
+  fsl,mpc8536-pmc: Sleep specifiers consist of three cells, the third of
+  which will be ORed into PMCDR upon suspend, and cleared from PMCDR
+  upon resume.  The first two cells are as described for fsl,mpc8578-pmc.
+  This sleep controller only supports disabling devices during system
+  sleep, or permanently.
+
+  fsl,mpc8548-pmc: Sleep specifiers consist of one or two cells, the
+  first of which will be ORed into DEVDISR (and the second into
+  DEVDISR2, if present -- this cell should be zero or absent if the
+  hardware does not have DEVDISR2) upon a request for permanent device
+  disabling.  This sleep controller does not support configuring devices
+  to disable during system sleep (unless supported by another compatible
+  match), or dynamically.
+
+Example:
+
+	power@b00 {
+		compatible = "fsl,mpc8313-pmc", "fsl,mpc8349-pmc";
+		reg = <0xb00 0x100 0xa00 0x100>;
+		interrupts = <80 8>;
+	};
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/raideng.txt b/Documentation/devicetree/bindings/powerpc/fsl/raideng.txt
new file mode 100644
index 000000000..4ad29b9ac
--- /dev/null
+++ b/Documentation/devicetree/bindings/powerpc/fsl/raideng.txt
@@ -0,0 +1,81 @@
+* Freescale 85xx RAID Engine nodes
+
+RAID Engine nodes are defined to describe on-chip RAID accelerators.  Each RAID
+Engine should have a separate node.
+
+Supported chips:
+P5020, P5040
+
+Required properties:
+
+- compatible:	Should contain "fsl,raideng-v1.0" as the value
+		This identifies RAID Engine block. 1 in 1.0 represents
+		major number whereas 0 represents minor number. The
+		version matches the hardware IP version.
+- reg:		offset and length of the register set for the device
+- ranges:	standard ranges property specifying the translation
+		between child address space and parent address space
+
+Example:
+	/* P5020 */
+	raideng: raideng@320000 {
+		compatible = "fsl,raideng-v1.0";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg	= <0x320000 0x10000>;
+		ranges	= <0 0x320000 0x10000>;
+	};
+
+
+There must be a sub-node for each job queue present in RAID Engine
+This node must be a sub-node of the main RAID Engine node
+
+- compatible:	Should contain "fsl,raideng-v1.0-job-queue" as the value
+		This identifies the job queue interface
+- reg:		offset and length of the register set for job queue
+- ranges:	standard ranges property specifying the translation
+		between child address space and parent address space
+
+Example:
+	/* P5020 */
+	raideng_jq0@1000 {
+		compatible = "fsl,raideng-v1.0-job-queue";
+		reg	   = <0x1000 0x1000>;
+		ranges	   = <0x0 0x1000 0x1000>;
+	};
+
+
+There must be a sub-node for each job ring present in RAID Engine
+This node must be a sub-node of job queue node
+
+- compatible:	Must contain "fsl,raideng-v1.0-job-ring" as the value
+		This identifies job ring. Should contain either
+		"fsl,raideng-v1.0-hp-ring" or "fsl,raideng-v1.0-lp-ring"
+		depending upon whether ring has high or low priority
+- reg:		offset and length of the register set for job ring
+- interrupts:	interrupt mapping for job ring IRQ
+
+Optional property:
+
+- fsl,liodn:	Specifies the LIODN to be used for Job Ring. This
+		property is normally set by firmware. Value
+		is of 12-bits which is the LIODN number for this JR.
+		This property is used by the IOMMU (PAMU) to distinquish
+		transactions from this JR and than be able to do address
+		translation & protection accordingly.
+
+Example:
+	/* P5020 */
+	raideng_jq0@1000 {
+		compatible = "fsl,raideng-v1.0-job-queue";
+		reg	   = <0x1000 0x1000>;
+		ranges	   = <0x0 0x1000 0x1000>;
+
+		raideng_jr0: jr@0 {
+			compatible = "fsl,raideng-v1.0-job-ring", "fsl,raideng-v1.0-hp-ring";
+			reg	   = <0x0 0x400>;
+			interrupts = <139 2 0 0>;
+			interrupt-parent = <&mpic>;
+			fsl,liodn = <0x41>;
+		};
+	};
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/scfg.txt b/Documentation/devicetree/bindings/powerpc/fsl/scfg.txt
new file mode 100644
index 000000000..0532c46b3
--- /dev/null
+++ b/Documentation/devicetree/bindings/powerpc/fsl/scfg.txt
@@ -0,0 +1,18 @@
+Freescale Supplement configuration unit (SCFG)
+
+SCFG is the supplemental configuration unit, that provides SoC specific
+configuration and status registers for the chip. Such as getting PEX port
+status.
+
+Required properties:
+
+- compatible: should be "fsl,<chip>-scfg"
+- reg: should contain base address and length of SCFG memory-mapped
+registers
+
+Example:
+
+	scfg: global-utilities@fc000 {
+		compatible = "fsl,t1040-scfg";
+		reg = <0xfc000 0x1000>;
+	};
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/srio-rmu.txt b/Documentation/devicetree/bindings/powerpc/fsl/srio-rmu.txt
new file mode 100644
index 000000000..0496ada4b
--- /dev/null
+++ b/Documentation/devicetree/bindings/powerpc/fsl/srio-rmu.txt
@@ -0,0 +1,163 @@
+Message unit node:
+
+For SRIO controllers that implement the message unit as part of the controller
+this node is required.  For devices with RMAN this node should NOT exist.  The
+node is composed of three types of sub-nodes ("fsl-srio-msg-unit",
+"fsl-srio-dbell-unit" and "fsl-srio-port-write-unit").
+
+See srio.txt for more details about generic SRIO controller details.
+
+   - compatible
+	Usage: required
+	Value type: <string>
+	Definition: Must include "fsl,srio-rmu-vX.Y", "fsl,srio-rmu".
+
+	The version X.Y should match the general SRIO controller's IP Block
+	revision register's Major(X) and Minor (Y) value.
+
+   - reg
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: A standard property.  Specifies the physical address and
+		length of the SRIO configuration registers for message units
+		and doorbell units.
+
+   - fsl,liodn
+	Usage: optional-but-recommended (for devices with PAMU)
+	Value type: <prop-encoded-array>
+	Definition: The logical I/O device number for the PAMU (IOMMU) to be
+		correctly configured for SRIO accesses.  The property should
+		not exist on devices that do not support PAMU.
+
+		The LIODN value is associated with all RMU transactions
+		(msg-unit, doorbell, port-write).
+
+Sub-Nodes for RMU:  The RMU node is composed of multiple sub-nodes that
+correspond to the actual sub-controllers in the RMU.  The manual for a given
+SoC will detail which and how many of these sub-controllers are implemented.
+
+Message Unit:
+
+   - compatible
+	Usage: required
+	Value type: <string>
+	Definition: Must include "fsl,srio-msg-unit-vX.Y", "fsl,srio-msg-unit".
+
+	The version X.Y should match the general SRIO controller's IP Block
+	revision register's Major(X) and Minor (Y) value.
+
+   - reg
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: A standard property.  Specifies the physical address and
+		length of the SRIO configuration registers for message units
+		and doorbell units.
+
+   - interrupts
+	Usage: required
+	Value type: <prop_encoded-array>
+	Definition:  Specifies the interrupts generated by this device.  The
+		value of the interrupts property consists of one interrupt
+		specifier. The format of the specifier is defined by the
+		binding document describing the node's interrupt parent.
+
+		A pair of IRQs are specified in this property.  The first
+		element is associated with the transmit (TX) interrupt and the
+		second element is associated with the receive (RX) interrupt.
+
+Doorbell Unit:
+
+   - compatible
+	Usage: required
+	Value type: <string>
+	Definition: Must include:
+		"fsl,srio-dbell-unit-vX.Y", "fsl,srio-dbell-unit"
+
+	The version X.Y should match the general SRIO controller's IP Block
+	revision register's Major(X) and Minor (Y) value.
+
+   - reg
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: A standard property.  Specifies the physical address and
+		length of the SRIO configuration registers for message units
+		and doorbell units.
+
+   - interrupts
+	Usage: required
+	Value type: <prop_encoded-array>
+	Definition:  Specifies the interrupts generated by this device.  The
+		value of the interrupts property consists of one interrupt
+		specifier. The format of the specifier is defined by the
+		binding document describing the node's interrupt parent.
+
+		A pair of IRQs are specified in this property.  The first
+		element is associated with the transmit (TX) interrupt and the
+		second element is associated with the receive (RX) interrupt.
+
+Port-Write Unit:
+
+   - compatible
+	Usage: required
+	Value type: <string>
+	Definition: Must include:
+		 "fsl,srio-port-write-unit-vX.Y", "fsl,srio-port-write-unit"
+
+	The version X.Y should match the general SRIO controller's IP Block
+	revision register's Major(X) and Minor (Y) value.
+
+   - reg
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: A standard property.  Specifies the physical address and
+		length of the SRIO configuration registers for message units
+		and doorbell units.
+
+   - interrupts
+	Usage: required
+	Value type: <prop_encoded-array>
+	Definition:  Specifies the interrupts generated by this device.  The
+		value of the interrupts property consists of one interrupt
+		specifier. The format of the specifier is defined by the
+		binding document describing the node's interrupt parent.
+
+		A single IRQ that handles port-write conditions is
+		specified by this property.  (Typically shared with error).
+
+   Note: All other standard properties (see the Devicetree Specification)
+   are allowed but are optional.
+
+Example:
+	rmu: rmu@d3000 {
+		compatible = "fsl,srio-rmu";
+		reg = <0xd3000 0x400>;
+		ranges = <0x0 0xd3000 0x400>;
+		fsl,liodn = <0xc8>;
+
+		message-unit@0 {
+			compatible = "fsl,srio-msg-unit";
+			reg = <0x0 0x100>;
+			interrupts = <
+				60 2 0 0  /* msg1_tx_irq */
+				61 2 0 0>;/* msg1_rx_irq */
+		};
+		message-unit@100 {
+			compatible = "fsl,srio-msg-unit";
+			reg = <0x100 0x100>;
+			interrupts = <
+				62 2 0 0  /* msg2_tx_irq */
+				63 2 0 0>;/* msg2_rx_irq */
+		};
+		doorbell-unit@400 {
+			compatible = "fsl,srio-dbell-unit";
+			reg = <0x400 0x80>;
+			interrupts = <
+				56 2 0 0  /* bell_outb_irq */
+				57 2 0 0>;/* bell_inb_irq */
+		};
+		port-write-unit@4e0 {
+			compatible = "fsl,srio-port-write-unit";
+			reg = <0x4e0 0x20>;
+			interrupts = <16 2 1 11>;
+		};
+	};
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/srio.txt b/Documentation/devicetree/bindings/powerpc/fsl/srio.txt
new file mode 100644
index 000000000..86ee6ea73
--- /dev/null
+++ b/Documentation/devicetree/bindings/powerpc/fsl/srio.txt
@@ -0,0 +1,104 @@
+* Freescale Serial RapidIO (SRIO) Controller
+
+RapidIO port node:
+Properties:
+   - compatible
+	Usage: required
+	Value type: <string>
+	Definition: Must include "fsl,srio" for IP blocks with IP Block
+	Revision Register (SRIO IPBRR1) Major ID equal to 0x01c0.
+
+	Optionally, a compatible string of "fsl,srio-vX.Y" where X is Major
+	version in IP Block Revision Register and Y is Minor version.  If this
+	compatible is provided it should be ordered before "fsl,srio".
+
+   - reg
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: A standard property.  Specifies the physical address and
+		length of the SRIO configuration registers.  The size should
+		be set to 0x11000.
+
+   - interrupts
+	Usage: required
+	Value type: <prop_encoded-array>
+	Definition:  Specifies the interrupts generated by this device.  The
+		value of the interrupts property consists of one interrupt
+		specifier. The format of the specifier is defined by the
+		binding document describing the node's interrupt parent.
+
+		A single IRQ that handles error conditions is specified by this
+		property.  (Typically shared with port-write).
+
+   - fsl,srio-rmu-handle:
+	Usage: required if rmu node is defined
+	Value type: <phandle>
+	Definition: A single <phandle> value that points to the RMU.
+	(See srio-rmu.txt for more details on RMU node binding)
+
+Port Child Nodes:  There should a port child node for each port that exists in
+the controller.  The ports are numbered starting at one (1) and should have
+the following properties:
+
+   - cell-index
+	Usage: required
+	Value type: <u32>
+	Definition: A standard property.  Matches the port id.
+
+   - ranges
+	Usage: required if local access windows preset
+	Value type: <prop-encoded-array>
+	Definition: A standard property. Utilized to describe the memory mapped
+		IO space utilized by the controller.  This corresponds to the
+		setting of the local access windows that are targeted to this
+		SRIO port.
+
+   - fsl,liodn
+	Usage: optional-but-recommended (for devices with PAMU)
+	Value type: <prop-encoded-array>
+	Definition: The logical I/O device number for the PAMU (IOMMU) to be
+		correctly configured for SRIO accesses.  The property should
+		not exist on devices that do not support PAMU.
+
+		For HW (ie, the P4080) that only supports a LIODN for both
+		memory and maintenance transactions then a single LIODN is
+		represented in the property for both transactions.
+
+		For HW (ie, the P304x/P5020, etc) that supports an LIODN for
+		memory transactions and a unique LIODN for maintenance
+		transactions then a pair of LIODNs are represented in the
+		property.  Within the pair, the first element represents the
+		LIODN associated with memory transactions and the second element
+		represents the LIODN associated with maintenance transactions
+		for the port.
+
+Note: All other standard properties (see the Devicetree Specification)
+are allowed but are optional.
+
+Example:
+
+	rapidio: rapidio@ffe0c0000 {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		reg = <0xf 0xfe0c0000 0 0x11000>;
+		compatible = "fsl,srio";
+		interrupts = <16 2 1 11>; /* err_irq */
+		fsl,srio-rmu-handle = <&rmu>;
+		ranges;
+
+		port1 {
+			cell-index = <1>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			fsl,liodn = <34>;
+			ranges = <0 0 0xc 0x20000000 0 0x10000000>;
+		};
+
+		port2 {
+			cell-index = <2>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			fsl,liodn = <48>;
+			ranges = <0 0 0xc 0x30000000 0 0x10000000>;
+		};
+	};