Adding upstream version 4.19.249.upstream/4.19.249upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 60 insertions, 0 deletions

diff --git a/Documentation/hwmon/max31785 b/Documentation/hwmon/max31785
new file mode 100644
index 000000000..270c5f865
--- /dev/null
+++ b/Documentation/hwmon/max31785
@@ -0,0 +1,60 @@
+Kernel driver max31785
+======================
+
+Supported chips:
+  * Maxim MAX31785, MAX31785A
+    Prefix: 'max31785' or 'max31785a'
+    Addresses scanned: -
+    Datasheet: https://datasheets.maximintegrated.com/en/ds/MAX31785.pdf
+
+Author: Andrew Jeffery <andrew@aj.id.au>
+
+Description
+-----------
+
+The Maxim MAX31785 is a PMBus device providing closed-loop, multi-channel fan
+management with temperature and remote voltage sensing. Various fan control
+features are provided, including PWM frequency control, temperature hysteresis,
+dual tachometer measurements, and fan health monitoring.
+
+For dual-rotor configurations the MAX31785A exposes the second rotor tachometer
+readings in attributes fan[5-8]_input. By contrast the MAX31785 only exposes
+the slowest rotor measurement, and does so in the fan[1-4]_input attributes.
+
+Usage Notes
+-----------
+
+This driver does not probe for PMBus devices. You will have to instantiate
+devices explicitly.
+
+Sysfs attributes
+----------------
+
+fan[1-4]_alarm		Fan alarm.
+fan[1-4]_fault		Fan fault.
+fan[1-8]_input		Fan RPM. On the MAX31785A, inputs 5-8 correspond to the
+			second rotor of fans 1-4
+fan[1-4]_target		Fan input target
+
+in[1-6]_crit		Critical maximum output voltage
+in[1-6]_crit_alarm	Output voltage critical high alarm
+in[1-6]_input		Measured output voltage
+in[1-6]_label		"vout[18-23]"
+in[1-6]_lcrit		Critical minimum output voltage
+in[1-6]_lcrit_alarm	Output voltage critical low alarm
+in[1-6]_max		Maximum output voltage
+in[1-6]_max_alarm	Output voltage high alarm
+in[1-6]_min		Minimum output voltage
+in[1-6]_min_alarm	Output voltage low alarm
+
+pwm[1-4]		Fan target duty cycle (0..255)
+pwm[1-4]_enable		0: Full-speed
+			1: Manual PWM control
+			2: Automatic PWM (tach-feedback RPM fan-control)
+			3: Automatic closed-loop (temp-feedback fan-control)
+
+temp[1-11]_crit		Critical high temperature
+temp[1-11]_crit_alarm	Chip temperature critical high alarm
+temp[1-11]_input	Measured temperature
+temp[1-11]_max		Maximum temperature
+temp[1-11]_max_alarm	Chip temperature high alarm