Adding upstream version 4.19.249.upstream/4.19.249upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 3883 insertions, 0 deletions

diff --git a/Documentation/media/uapi/v4l/extended-controls.rst b/Documentation/media/uapi/v4l/extended-controls.rst
new file mode 100644
index 000000000..9f7312bf3
--- /dev/null
+++ b/Documentation/media/uapi/v4l/extended-controls.rst
@@ -0,0 +1,3883 @@
+.. -*- coding: utf-8; mode: rst -*-
+
+.. _extended-controls:
+
+*****************
+Extended Controls
+*****************
+
+
+Introduction
+============
+
+The control mechanism as originally designed was meant to be used for
+user settings (brightness, saturation, etc). However, it turned out to
+be a very useful model for implementing more complicated driver APIs
+where each driver implements only a subset of a larger API.
+
+The MPEG encoding API was the driving force behind designing and
+implementing this extended control mechanism: the MPEG standard is quite
+large and the currently supported hardware MPEG encoders each only
+implement a subset of this standard. Further more, many parameters
+relating to how the video is encoded into an MPEG stream are specific to
+the MPEG encoding chip since the MPEG standard only defines the format
+of the resulting MPEG stream, not how the video is actually encoded into
+that format.
+
+Unfortunately, the original control API lacked some features needed for
+these new uses and so it was extended into the (not terribly originally
+named) extended control API.
+
+Even though the MPEG encoding API was the first effort to use the
+Extended Control API, nowadays there are also other classes of Extended
+Controls, such as Camera Controls and FM Transmitter Controls. The
+Extended Controls API as well as all Extended Controls classes are
+described in the following text.
+
+
+The Extended Control API
+========================
+
+Three new ioctls are available:
+:ref:`VIDIOC_G_EXT_CTRLS <VIDIOC_G_EXT_CTRLS>`,
+:ref:`VIDIOC_S_EXT_CTRLS <VIDIOC_G_EXT_CTRLS>` and
+:ref:`VIDIOC_TRY_EXT_CTRLS <VIDIOC_G_EXT_CTRLS>`. These ioctls act
+on arrays of controls (as opposed to the
+:ref:`VIDIOC_G_CTRL <VIDIOC_G_CTRL>` and
+:ref:`VIDIOC_S_CTRL <VIDIOC_G_CTRL>` ioctls that act on a single
+control). This is needed since it is often required to atomically change
+several controls at once.
+
+Each of the new ioctls expects a pointer to a struct
+:c:type:`v4l2_ext_controls`. This structure
+contains a pointer to the control array, a count of the number of
+controls in that array and a control class. Control classes are used to
+group similar controls into a single class. For example, control class
+``V4L2_CTRL_CLASS_USER`` contains all user controls (i. e. all controls
+that can also be set using the old :ref:`VIDIOC_S_CTRL <VIDIOC_G_CTRL>`
+ioctl). Control class ``V4L2_CTRL_CLASS_MPEG`` contains all controls
+relating to MPEG encoding, etc.
+
+All controls in the control array must belong to the specified control
+class. An error is returned if this is not the case.
+
+It is also possible to use an empty control array (``count`` == 0) to check
+whether the specified control class is supported.
+
+The control array is a struct
+:c:type:`v4l2_ext_control` array. The
+struct :c:type:`v4l2_ext_control` is very similar to
+struct :c:type:`v4l2_control`, except for the fact that
+it also allows for 64-bit values and pointers to be passed.
+
+Since the struct :c:type:`v4l2_ext_control` supports
+pointers it is now also possible to have controls with compound types
+such as N-dimensional arrays and/or structures. You need to specify the
+``V4L2_CTRL_FLAG_NEXT_COMPOUND`` when enumerating controls to actually
+be able to see such compound controls. In other words, these controls
+with compound types should only be used programmatically.
+
+Since such compound controls need to expose more information about
+themselves than is possible with
+:ref:`VIDIOC_QUERYCTRL` the
+:ref:`VIDIOC_QUERY_EXT_CTRL <VIDIOC_QUERYCTRL>` ioctl was added. In
+particular, this ioctl gives the dimensions of the N-dimensional array
+if this control consists of more than one element.
+
+.. note::
+
+   #. It is important to realize that due to the flexibility of controls it is
+      necessary to check whether the control you want to set actually is
+      supported in the driver and what the valid range of values is. So use
+      the :ref:`VIDIOC_QUERYCTRL` (or :ref:`VIDIOC_QUERY_EXT_CTRL
+      <VIDIOC_QUERYCTRL>`) and :ref:`VIDIOC_QUERYMENU <VIDIOC_QUERYCTRL>`
+      ioctls to check this.
+
+   #. It is possible that some of the menu indices in a control of
+      type ``V4L2_CTRL_TYPE_MENU`` may not be supported (``VIDIOC_QUERYMENU``
+      will return an error). A good example is the list of supported MPEG
+      audio bitrates. Some drivers only support one or two bitrates, others
+      support a wider range.
+
+All controls use machine endianness.
+
+
+Enumerating Extended Controls
+=============================
+
+The recommended way to enumerate over the extended controls is by using
+:ref:`VIDIOC_QUERYCTRL` in combination with the
+``V4L2_CTRL_FLAG_NEXT_CTRL`` flag:
+
+
+.. code-block:: c
+
+    struct v4l2_queryctrl qctrl;
+
+    qctrl.id = V4L2_CTRL_FLAG_NEXT_CTRL;
+    while (0 == ioctl (fd, VIDIOC_QUERYCTRL, &qctrl)) {
+	/* ... */
+	qctrl.id |= V4L2_CTRL_FLAG_NEXT_CTRL;
+    }
+
+The initial control ID is set to 0 ORed with the
+``V4L2_CTRL_FLAG_NEXT_CTRL`` flag. The ``VIDIOC_QUERYCTRL`` ioctl will
+return the first control with a higher ID than the specified one. When
+no such controls are found an error is returned.
+
+If you want to get all controls within a specific control class, then
+you can set the initial ``qctrl.id`` value to the control class and add
+an extra check to break out of the loop when a control of another
+control class is found:
+
+
+.. code-block:: c
+
+    qctrl.id = V4L2_CTRL_CLASS_MPEG | V4L2_CTRL_FLAG_NEXT_CTRL;
+    while (0 == ioctl(fd, VIDIOC_QUERYCTRL, &qctrl)) {
+	if (V4L2_CTRL_ID2CLASS(qctrl.id) != V4L2_CTRL_CLASS_MPEG)
+	    break;
+	    /* ... */
+	qctrl.id |= V4L2_CTRL_FLAG_NEXT_CTRL;
+    }
+
+The 32-bit ``qctrl.id`` value is subdivided into three bit ranges: the
+top 4 bits are reserved for flags (e. g. ``V4L2_CTRL_FLAG_NEXT_CTRL``)
+and are not actually part of the ID. The remaining 28 bits form the
+control ID, of which the most significant 12 bits define the control
+class and the least significant 16 bits identify the control within the
+control class. It is guaranteed that these last 16 bits are always
+non-zero for controls. The range of 0x1000 and up are reserved for
+driver-specific controls. The macro ``V4L2_CTRL_ID2CLASS(id)`` returns
+the control class ID based on a control ID.
+
+If the driver does not support extended controls, then
+``VIDIOC_QUERYCTRL`` will fail when used in combination with
+``V4L2_CTRL_FLAG_NEXT_CTRL``. In that case the old method of enumerating
+control should be used (see :ref:`enum_all_controls`). But if it is
+supported, then it is guaranteed to enumerate over all controls,
+including driver-private controls.
+
+
+Creating Control Panels
+=======================
+
+It is possible to create control panels for a graphical user interface
+where the user can select the various controls. Basically you will have
+to iterate over all controls using the method described above. Each
+control class starts with a control of type
+``V4L2_CTRL_TYPE_CTRL_CLASS``. ``VIDIOC_QUERYCTRL`` will return the name
+of this control class which can be used as the title of a tab page
+within a control panel.
+
+The flags field of struct :ref:`v4l2_queryctrl <v4l2-queryctrl>` also
+contains hints on the behavior of the control. See the
+:ref:`VIDIOC_QUERYCTRL` documentation for more
+details.
+
+
+.. _mpeg-controls:
+
+Codec Control Reference
+=======================
+
+Below all controls within the Codec control class are described. First
+the generic controls, then controls specific for certain hardware.
+
+.. note::
+
+   These controls are applicable to all codecs and not just MPEG. The
+   defines are prefixed with V4L2_CID_MPEG/V4L2_MPEG as the controls
+   were originally made for MPEG codecs and later extended to cover all
+   encoding formats.
+
+
+Generic Codec Controls
+----------------------
+
+
+.. _mpeg-control-id:
+
+Codec Control IDs
+^^^^^^^^^^^^^^^^^
+
+``V4L2_CID_MPEG_CLASS (class)``
+    The Codec class descriptor. Calling
+    :ref:`VIDIOC_QUERYCTRL` for this control will
+    return a description of this control class. This description can be
+    used as the caption of a Tab page in a GUI, for example.
+
+.. _v4l2-mpeg-stream-type:
+
+``V4L2_CID_MPEG_STREAM_TYPE``
+    (enum)
+
+enum v4l2_mpeg_stream_type -
+    The MPEG-1, -2 or -4 output stream type. One cannot assume anything
+    here. Each hardware MPEG encoder tends to support different subsets
+    of the available MPEG stream types. This control is specific to
+    multiplexed MPEG streams. The currently defined stream types are:
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - ``V4L2_MPEG_STREAM_TYPE_MPEG2_PS``
+      - MPEG-2 program stream
+    * - ``V4L2_MPEG_STREAM_TYPE_MPEG2_TS``
+      - MPEG-2 transport stream
+    * - ``V4L2_MPEG_STREAM_TYPE_MPEG1_SS``
+      - MPEG-1 system stream
+    * - ``V4L2_MPEG_STREAM_TYPE_MPEG2_DVD``
+      - MPEG-2 DVD-compatible stream
+    * - ``V4L2_MPEG_STREAM_TYPE_MPEG1_VCD``
+      - MPEG-1 VCD-compatible stream
+    * - ``V4L2_MPEG_STREAM_TYPE_MPEG2_SVCD``
+      - MPEG-2 SVCD-compatible stream
+
+
+
+``V4L2_CID_MPEG_STREAM_PID_PMT (integer)``
+    Program Map Table Packet ID for the MPEG transport stream (default
+    16)
+
+``V4L2_CID_MPEG_STREAM_PID_AUDIO (integer)``
+    Audio Packet ID for the MPEG transport stream (default 256)
+
+``V4L2_CID_MPEG_STREAM_PID_VIDEO (integer)``
+    Video Packet ID for the MPEG transport stream (default 260)
+
+``V4L2_CID_MPEG_STREAM_PID_PCR (integer)``
+    Packet ID for the MPEG transport stream carrying PCR fields (default
+    259)
+
+``V4L2_CID_MPEG_STREAM_PES_ID_AUDIO (integer)``
+    Audio ID for MPEG PES
+
+``V4L2_CID_MPEG_STREAM_PES_ID_VIDEO (integer)``
+    Video ID for MPEG PES
+
+.. _v4l2-mpeg-stream-vbi-fmt:
+
+``V4L2_CID_MPEG_STREAM_VBI_FMT``
+    (enum)
+
+enum v4l2_mpeg_stream_vbi_fmt -
+    Some cards can embed VBI data (e. g. Closed Caption, Teletext) into
+    the MPEG stream. This control selects whether VBI data should be
+    embedded, and if so, what embedding method should be used. The list
+    of possible VBI formats depends on the driver. The currently defined
+    VBI format types are:
+
+
+
+.. tabularcolumns:: |p{6 cm}|p{11.5cm}|
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - ``V4L2_MPEG_STREAM_VBI_FMT_NONE``
+      - No VBI in the MPEG stream
+    * - ``V4L2_MPEG_STREAM_VBI_FMT_IVTV``
+      - VBI in private packets, IVTV format (documented in the kernel
+	sources in the file
+	``Documentation/media/v4l-drivers/cx2341x.rst``)
+
+
+
+.. _v4l2-mpeg-audio-sampling-freq:
+
+``V4L2_CID_MPEG_AUDIO_SAMPLING_FREQ``
+    (enum)
+
+enum v4l2_mpeg_audio_sampling_freq -
+    MPEG Audio sampling frequency. Possible values are:
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - ``V4L2_MPEG_AUDIO_SAMPLING_FREQ_44100``
+      - 44.1 kHz
+    * - ``V4L2_MPEG_AUDIO_SAMPLING_FREQ_48000``
+      - 48 kHz
+    * - ``V4L2_MPEG_AUDIO_SAMPLING_FREQ_32000``
+      - 32 kHz
+
+
+
+.. _v4l2-mpeg-audio-encoding:
+
+``V4L2_CID_MPEG_AUDIO_ENCODING``
+    (enum)
+
+enum v4l2_mpeg_audio_encoding -
+    MPEG Audio encoding. This control is specific to multiplexed MPEG
+    streams. Possible values are:
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - ``V4L2_MPEG_AUDIO_ENCODING_LAYER_1``
+      - MPEG-1/2 Layer I encoding
+    * - ``V4L2_MPEG_AUDIO_ENCODING_LAYER_2``
+      - MPEG-1/2 Layer II encoding
+    * - ``V4L2_MPEG_AUDIO_ENCODING_LAYER_3``
+      - MPEG-1/2 Layer III encoding
+    * - ``V4L2_MPEG_AUDIO_ENCODING_AAC``
+      - MPEG-2/4 AAC (Advanced Audio Coding)
+    * - ``V4L2_MPEG_AUDIO_ENCODING_AC3``
+      - AC-3 aka ATSC A/52 encoding
+
+
+
+.. _v4l2-mpeg-audio-l1-bitrate:
+
+``V4L2_CID_MPEG_AUDIO_L1_BITRATE``
+    (enum)
+
+enum v4l2_mpeg_audio_l1_bitrate -
+    MPEG-1/2 Layer I bitrate. Possible values are:
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - ``V4L2_MPEG_AUDIO_L1_BITRATE_32K``
+      - 32 kbit/s
+    * - ``V4L2_MPEG_AUDIO_L1_BITRATE_64K``
+      - 64 kbit/s
+    * - ``V4L2_MPEG_AUDIO_L1_BITRATE_96K``
+      - 96 kbit/s
+    * - ``V4L2_MPEG_AUDIO_L1_BITRATE_128K``
+      - 128 kbit/s
+    * - ``V4L2_MPEG_AUDIO_L1_BITRATE_160K``
+      - 160 kbit/s
+    * - ``V4L2_MPEG_AUDIO_L1_BITRATE_192K``
+      - 192 kbit/s
+    * - ``V4L2_MPEG_AUDIO_L1_BITRATE_224K``
+      - 224 kbit/s
+    * - ``V4L2_MPEG_AUDIO_L1_BITRATE_256K``
+      - 256 kbit/s
+    * - ``V4L2_MPEG_AUDIO_L1_BITRATE_288K``
+      - 288 kbit/s
+    * - ``V4L2_MPEG_AUDIO_L1_BITRATE_320K``
+      - 320 kbit/s
+    * - ``V4L2_MPEG_AUDIO_L1_BITRATE_352K``
+      - 352 kbit/s
+    * - ``V4L2_MPEG_AUDIO_L1_BITRATE_384K``
+      - 384 kbit/s
+    * - ``V4L2_MPEG_AUDIO_L1_BITRATE_416K``
+      - 416 kbit/s
+    * - ``V4L2_MPEG_AUDIO_L1_BITRATE_448K``
+      - 448 kbit/s
+
+
+
+.. _v4l2-mpeg-audio-l2-bitrate:
+
+``V4L2_CID_MPEG_AUDIO_L2_BITRATE``
+    (enum)
+
+enum v4l2_mpeg_audio_l2_bitrate -
+    MPEG-1/2 Layer II bitrate. Possible values are:
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - ``V4L2_MPEG_AUDIO_L2_BITRATE_32K``
+      - 32 kbit/s
+    * - ``V4L2_MPEG_AUDIO_L2_BITRATE_48K``
+      - 48 kbit/s
+    * - ``V4L2_MPEG_AUDIO_L2_BITRATE_56K``
+      - 56 kbit/s
+    * - ``V4L2_MPEG_AUDIO_L2_BITRATE_64K``
+      - 64 kbit/s
+    * - ``V4L2_MPEG_AUDIO_L2_BITRATE_80K``
+      - 80 kbit/s
+    * - ``V4L2_MPEG_AUDIO_L2_BITRATE_96K``
+      - 96 kbit/s
+    * - ``V4L2_MPEG_AUDIO_L2_BITRATE_112K``
+      - 112 kbit/s
+    * - ``V4L2_MPEG_AUDIO_L2_BITRATE_128K``
+      - 128 kbit/s
+    * - ``V4L2_MPEG_AUDIO_L2_BITRATE_160K``
+      - 160 kbit/s
+    * - ``V4L2_MPEG_AUDIO_L2_BITRATE_192K``
+      - 192 kbit/s
+    * - ``V4L2_MPEG_AUDIO_L2_BITRATE_224K``
+      - 224 kbit/s
+    * - ``V4L2_MPEG_AUDIO_L2_BITRATE_256K``
+      - 256 kbit/s
+    * - ``V4L2_MPEG_AUDIO_L2_BITRATE_320K``
+      - 320 kbit/s
+    * - ``V4L2_MPEG_AUDIO_L2_BITRATE_384K``
+      - 384 kbit/s
+
+
+
+.. _v4l2-mpeg-audio-l3-bitrate:
+
+``V4L2_CID_MPEG_AUDIO_L3_BITRATE``
+    (enum)
+
+enum v4l2_mpeg_audio_l3_bitrate -
+    MPEG-1/2 Layer III bitrate. Possible values are:
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - ``V4L2_MPEG_AUDIO_L3_BITRATE_32K``
+      - 32 kbit/s
+    * - ``V4L2_MPEG_AUDIO_L3_BITRATE_40K``
+      - 40 kbit/s
+    * - ``V4L2_MPEG_AUDIO_L3_BITRATE_48K``
+      - 48 kbit/s
+    * - ``V4L2_MPEG_AUDIO_L3_BITRATE_56K``
+      - 56 kbit/s
+    * - ``V4L2_MPEG_AUDIO_L3_BITRATE_64K``
+      - 64 kbit/s
+    * - ``V4L2_MPEG_AUDIO_L3_BITRATE_80K``
+      - 80 kbit/s
+    * - ``V4L2_MPEG_AUDIO_L3_BITRATE_96K``
+      - 96 kbit/s
+    * - ``V4L2_MPEG_AUDIO_L3_BITRATE_112K``
+      - 112 kbit/s
+    * - ``V4L2_MPEG_AUDIO_L3_BITRATE_128K``
+      - 128 kbit/s
+    * - ``V4L2_MPEG_AUDIO_L3_BITRATE_160K``
+      - 160 kbit/s
+    * - ``V4L2_MPEG_AUDIO_L3_BITRATE_192K``
+      - 192 kbit/s
+    * - ``V4L2_MPEG_AUDIO_L3_BITRATE_224K``
+      - 224 kbit/s
+    * - ``V4L2_MPEG_AUDIO_L3_BITRATE_256K``
+      - 256 kbit/s
+    * - ``V4L2_MPEG_AUDIO_L3_BITRATE_320K``
+      - 320 kbit/s
+
+
+
+``V4L2_CID_MPEG_AUDIO_AAC_BITRATE (integer)``
+    AAC bitrate in bits per second.
+
+.. _v4l2-mpeg-audio-ac3-bitrate:
+
+``V4L2_CID_MPEG_AUDIO_AC3_BITRATE``
+    (enum)
+
+enum v4l2_mpeg_audio_ac3_bitrate -
+    AC-3 bitrate. Possible values are:
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - ``V4L2_MPEG_AUDIO_AC3_BITRATE_32K``
+      - 32 kbit/s
+    * - ``V4L2_MPEG_AUDIO_AC3_BITRATE_40K``
+      - 40 kbit/s
+    * - ``V4L2_MPEG_AUDIO_AC3_BITRATE_48K``
+      - 48 kbit/s
+    * - ``V4L2_MPEG_AUDIO_AC3_BITRATE_56K``
+      - 56 kbit/s
+    * - ``V4L2_MPEG_AUDIO_AC3_BITRATE_64K``
+      - 64 kbit/s
+    * - ``V4L2_MPEG_AUDIO_AC3_BITRATE_80K``
+      - 80 kbit/s
+    * - ``V4L2_MPEG_AUDIO_AC3_BITRATE_96K``
+      - 96 kbit/s
+    * - ``V4L2_MPEG_AUDIO_AC3_BITRATE_112K``
+      - 112 kbit/s
+    * - ``V4L2_MPEG_AUDIO_AC3_BITRATE_128K``
+      - 128 kbit/s
+    * - ``V4L2_MPEG_AUDIO_AC3_BITRATE_160K``
+      - 160 kbit/s
+    * - ``V4L2_MPEG_AUDIO_AC3_BITRATE_192K``
+      - 192 kbit/s
+    * - ``V4L2_MPEG_AUDIO_AC3_BITRATE_224K``
+      - 224 kbit/s
+    * - ``V4L2_MPEG_AUDIO_AC3_BITRATE_256K``
+      - 256 kbit/s
+    * - ``V4L2_MPEG_AUDIO_AC3_BITRATE_320K``
+      - 320 kbit/s
+    * - ``V4L2_MPEG_AUDIO_AC3_BITRATE_384K``
+      - 384 kbit/s
+    * - ``V4L2_MPEG_AUDIO_AC3_BITRATE_448K``
+      - 448 kbit/s
+    * - ``V4L2_MPEG_AUDIO_AC3_BITRATE_512K``
+      - 512 kbit/s
+    * - ``V4L2_MPEG_AUDIO_AC3_BITRATE_576K``
+      - 576 kbit/s
+    * - ``V4L2_MPEG_AUDIO_AC3_BITRATE_640K``
+      - 640 kbit/s
+
+
+
+.. _v4l2-mpeg-audio-mode:
+
+``V4L2_CID_MPEG_AUDIO_MODE``
+    (enum)
+
+enum v4l2_mpeg_audio_mode -
+    MPEG Audio mode. Possible values are:
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - ``V4L2_MPEG_AUDIO_MODE_STEREO``
+      - Stereo
+    * - ``V4L2_MPEG_AUDIO_MODE_JOINT_STEREO``
+      - Joint Stereo
+    * - ``V4L2_MPEG_AUDIO_MODE_DUAL``
+      - Bilingual
+    * - ``V4L2_MPEG_AUDIO_MODE_MONO``
+      - Mono
+
+
+
+.. _v4l2-mpeg-audio-mode-extension:
+
+``V4L2_CID_MPEG_AUDIO_MODE_EXTENSION``
+    (enum)
+
+enum v4l2_mpeg_audio_mode_extension -
+    Joint Stereo audio mode extension. In Layer I and II they indicate
+    which subbands are in intensity stereo. All other subbands are coded
+    in stereo. Layer III is not (yet) supported. Possible values are:
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - ``V4L2_MPEG_AUDIO_MODE_EXTENSION_BOUND_4``
+      - Subbands 4-31 in intensity stereo
+    * - ``V4L2_MPEG_AUDIO_MODE_EXTENSION_BOUND_8``
+      - Subbands 8-31 in intensity stereo
+    * - ``V4L2_MPEG_AUDIO_MODE_EXTENSION_BOUND_12``
+      - Subbands 12-31 in intensity stereo
+    * - ``V4L2_MPEG_AUDIO_MODE_EXTENSION_BOUND_16``
+      - Subbands 16-31 in intensity stereo
+
+
+
+.. _v4l2-mpeg-audio-emphasis:
+
+``V4L2_CID_MPEG_AUDIO_EMPHASIS``
+    (enum)
+
+enum v4l2_mpeg_audio_emphasis -
+    Audio Emphasis. Possible values are:
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - ``V4L2_MPEG_AUDIO_EMPHASIS_NONE``
+      - None
+    * - ``V4L2_MPEG_AUDIO_EMPHASIS_50_DIV_15_uS``
+      - 50/15 microsecond emphasis
+    * - ``V4L2_MPEG_AUDIO_EMPHASIS_CCITT_J17``
+      - CCITT J.17
+
+
+
+.. _v4l2-mpeg-audio-crc:
+
+``V4L2_CID_MPEG_AUDIO_CRC``
+    (enum)
+
+enum v4l2_mpeg_audio_crc -
+    CRC method. Possible values are:
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - ``V4L2_MPEG_AUDIO_CRC_NONE``
+      - None
+    * - ``V4L2_MPEG_AUDIO_CRC_CRC16``
+      - 16 bit parity check
+
+
+
+``V4L2_CID_MPEG_AUDIO_MUTE (boolean)``
+    Mutes the audio when capturing. This is not done by muting audio
+    hardware, which can still produce a slight hiss, but in the encoder
+    itself, guaranteeing a fixed and reproducible audio bitstream. 0 =
+    unmuted, 1 = muted.
+
+.. _v4l2-mpeg-audio-dec-playback:
+
+``V4L2_CID_MPEG_AUDIO_DEC_PLAYBACK``
+    (enum)
+
+enum v4l2_mpeg_audio_dec_playback -
+    Determines how monolingual audio should be played back. Possible
+    values are:
+
+
+
+.. tabularcolumns:: |p{9.0cm}|p{8.5cm}|
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - ``V4L2_MPEG_AUDIO_DEC_PLAYBACK_AUTO``
+      - Automatically determines the best playback mode.
+    * - ``V4L2_MPEG_AUDIO_DEC_PLAYBACK_STEREO``
+      - Stereo playback.
+    * - ``V4L2_MPEG_AUDIO_DEC_PLAYBACK_LEFT``
+      - Left channel playback.
+    * - ``V4L2_MPEG_AUDIO_DEC_PLAYBACK_RIGHT``
+      - Right channel playback.
+    * - ``V4L2_MPEG_AUDIO_DEC_PLAYBACK_MONO``
+      - Mono playback.
+    * - ``V4L2_MPEG_AUDIO_DEC_PLAYBACK_SWAPPED_STEREO``
+      - Stereo playback with swapped left and right channels.
+
+
+
+.. _v4l2-mpeg-audio-dec-multilingual-playback:
+
+``V4L2_CID_MPEG_AUDIO_DEC_MULTILINGUAL_PLAYBACK``
+    (enum)
+
+enum v4l2_mpeg_audio_dec_playback -
+    Determines how multilingual audio should be played back.
+
+.. _v4l2-mpeg-video-encoding:
+
+``V4L2_CID_MPEG_VIDEO_ENCODING``
+    (enum)
+
+enum v4l2_mpeg_video_encoding -
+    MPEG Video encoding method. This control is specific to multiplexed
+    MPEG streams. Possible values are:
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - ``V4L2_MPEG_VIDEO_ENCODING_MPEG_1``
+      - MPEG-1 Video encoding
+    * - ``V4L2_MPEG_VIDEO_ENCODING_MPEG_2``
+      - MPEG-2 Video encoding
+    * - ``V4L2_MPEG_VIDEO_ENCODING_MPEG_4_AVC``
+      - MPEG-4 AVC (H.264) Video encoding
+
+
+
+.. _v4l2-mpeg-video-aspect:
+
+``V4L2_CID_MPEG_VIDEO_ASPECT``
+    (enum)
+
+enum v4l2_mpeg_video_aspect -
+    Video aspect. Possible values are:
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - ``V4L2_MPEG_VIDEO_ASPECT_1x1``
+    * - ``V4L2_MPEG_VIDEO_ASPECT_4x3``
+    * - ``V4L2_MPEG_VIDEO_ASPECT_16x9``
+    * - ``V4L2_MPEG_VIDEO_ASPECT_221x100``
+
+
+
+``V4L2_CID_MPEG_VIDEO_B_FRAMES (integer)``
+    Number of B-Frames (default 2)
+
+``V4L2_CID_MPEG_VIDEO_GOP_SIZE (integer)``
+    GOP size (default 12)
+
+``V4L2_CID_MPEG_VIDEO_GOP_CLOSURE (boolean)``
+    GOP closure (default 1)
+
+``V4L2_CID_MPEG_VIDEO_PULLDOWN (boolean)``
+    Enable 3:2 pulldown (default 0)
+
+.. _v4l2-mpeg-video-bitrate-mode:
+
+``V4L2_CID_MPEG_VIDEO_BITRATE_MODE``
+    (enum)
+
+enum v4l2_mpeg_video_bitrate_mode -
+    Video bitrate mode. Possible values are:
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - ``V4L2_MPEG_VIDEO_BITRATE_MODE_VBR``
+      - Variable bitrate
+    * - ``V4L2_MPEG_VIDEO_BITRATE_MODE_CBR``
+      - Constant bitrate
+
+
+
+``V4L2_CID_MPEG_VIDEO_BITRATE (integer)``
+    Video bitrate in bits per second.
+
+``V4L2_CID_MPEG_VIDEO_BITRATE_PEAK (integer)``
+    Peak video bitrate in bits per second. Must be larger or equal to
+    the average video bitrate. It is ignored if the video bitrate mode
+    is set to constant bitrate.
+
+``V4L2_CID_MPEG_VIDEO_TEMPORAL_DECIMATION (integer)``
+    For every captured frame, skip this many subsequent frames (default
+    0).
+
+``V4L2_CID_MPEG_VIDEO_MUTE (boolean)``
+    "Mutes" the video to a fixed color when capturing. This is useful
+    for testing, to produce a fixed video bitstream. 0 = unmuted, 1 =
+    muted.
+
+``V4L2_CID_MPEG_VIDEO_MUTE_YUV (integer)``
+    Sets the "mute" color of the video. The supplied 32-bit integer is
+    interpreted as follows (bit 0 = least significant bit):
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - Bit 0:7
+      - V chrominance information
+    * - Bit 8:15
+      - U chrominance information
+    * - Bit 16:23
+      - Y luminance information
+    * - Bit 24:31
+      - Must be zero.
+
+
+
+.. _v4l2-mpeg-video-dec-pts:
+
+``V4L2_CID_MPEG_VIDEO_DEC_PTS (integer64)``
+    This read-only control returns the 33-bit video Presentation Time
+    Stamp as defined in ITU T-REC-H.222.0 and ISO/IEC 13818-1 of the
+    currently displayed frame. This is the same PTS as is used in
+    :ref:`VIDIOC_DECODER_CMD`.
+
+.. _v4l2-mpeg-video-dec-frame:
+
+``V4L2_CID_MPEG_VIDEO_DEC_FRAME (integer64)``
+    This read-only control returns the frame counter of the frame that
+    is currently displayed (decoded). This value is reset to 0 whenever
+    the decoder is started.
+
+``V4L2_CID_MPEG_VIDEO_DECODER_SLICE_INTERFACE (boolean)``
+    If enabled the decoder expects to receive a single slice per buffer,
+    otherwise the decoder expects a single frame in per buffer.
+    Applicable to the decoder, all codecs.
+
+``V4L2_CID_MPEG_VIDEO_H264_VUI_SAR_ENABLE (boolean)``
+    Enable writing sample aspect ratio in the Video Usability
+    Information. Applicable to the H264 encoder.
+
+.. _v4l2-mpeg-video-h264-vui-sar-idc:
+
+``V4L2_CID_MPEG_VIDEO_H264_VUI_SAR_IDC``
+    (enum)
+
+enum v4l2_mpeg_video_h264_vui_sar_idc -
+    VUI sample aspect ratio indicator for H.264 encoding. The value is
+    defined in the table E-1 in the standard. Applicable to the H264
+    encoder.
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - ``V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_UNSPECIFIED``
+      - Unspecified
+    * - ``V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_1x1``
+      - 1x1
+    * - ``V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_12x11``
+      - 12x11
+    * - ``V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_10x11``
+      - 10x11
+    * - ``V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_16x11``
+      - 16x11
+    * - ``V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_40x33``
+      - 40x33
+    * - ``V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_24x11``
+      - 24x11
+    * - ``V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_20x11``
+      - 20x11
+    * - ``V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_32x11``
+      - 32x11
+    * - ``V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_80x33``
+      - 80x33
+    * - ``V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_18x11``
+      - 18x11
+    * - ``V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_15x11``
+      - 15x11
+    * - ``V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_64x33``
+      - 64x33
+    * - ``V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_160x99``
+      - 160x99
+    * - ``V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_4x3``
+      - 4x3
+    * - ``V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_3x2``
+      - 3x2
+    * - ``V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_2x1``
+      - 2x1
+    * - ``V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_EXTENDED``
+      - Extended SAR
+
+
+
+``V4L2_CID_MPEG_VIDEO_H264_VUI_EXT_SAR_WIDTH (integer)``
+    Extended sample aspect ratio width for H.264 VUI encoding.
+    Applicable to the H264 encoder.
+
+``V4L2_CID_MPEG_VIDEO_H264_VUI_EXT_SAR_HEIGHT (integer)``
+    Extended sample aspect ratio height for H.264 VUI encoding.
+    Applicable to the H264 encoder.
+
+.. _v4l2-mpeg-video-h264-level:
+
+``V4L2_CID_MPEG_VIDEO_H264_LEVEL``
+    (enum)
+
+enum v4l2_mpeg_video_h264_level -
+    The level information for the H264 video elementary stream.
+    Applicable to the H264 encoder. Possible values are:
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - ``V4L2_MPEG_VIDEO_H264_LEVEL_1_0``
+      - Level 1.0
+    * - ``V4L2_MPEG_VIDEO_H264_LEVEL_1B``
+      - Level 1B
+    * - ``V4L2_MPEG_VIDEO_H264_LEVEL_1_1``
+      - Level 1.1
+    * - ``V4L2_MPEG_VIDEO_H264_LEVEL_1_2``
+      - Level 1.2
+    * - ``V4L2_MPEG_VIDEO_H264_LEVEL_1_3``
+      - Level 1.3
+    * - ``V4L2_MPEG_VIDEO_H264_LEVEL_2_0``
+      - Level 2.0
+    * - ``V4L2_MPEG_VIDEO_H264_LEVEL_2_1``
+      - Level 2.1
+    * - ``V4L2_MPEG_VIDEO_H264_LEVEL_2_2``
+      - Level 2.2
+    * - ``V4L2_MPEG_VIDEO_H264_LEVEL_3_0``
+      - Level 3.0
+    * - ``V4L2_MPEG_VIDEO_H264_LEVEL_3_1``
+      - Level 3.1
+    * - ``V4L2_MPEG_VIDEO_H264_LEVEL_3_2``
+      - Level 3.2
+    * - ``V4L2_MPEG_VIDEO_H264_LEVEL_4_0``
+      - Level 4.0
+    * - ``V4L2_MPEG_VIDEO_H264_LEVEL_4_1``
+      - Level 4.1
+    * - ``V4L2_MPEG_VIDEO_H264_LEVEL_4_2``
+      - Level 4.2
+    * - ``V4L2_MPEG_VIDEO_H264_LEVEL_5_0``
+      - Level 5.0
+    * - ``V4L2_MPEG_VIDEO_H264_LEVEL_5_1``
+      - Level 5.1
+
+
+
+.. _v4l2-mpeg-video-mpeg4-level:
+
+``V4L2_CID_MPEG_VIDEO_MPEG4_LEVEL``
+    (enum)
+
+enum v4l2_mpeg_video_mpeg4_level -
+    The level information for the MPEG4 elementary stream. Applicable to
+    the MPEG4 encoder. Possible values are:
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - ``V4L2_MPEG_VIDEO_MPEG4_LEVEL_0``
+      - Level 0
+    * - ``V4L2_MPEG_VIDEO_MPEG4_LEVEL_0B``
+      - Level 0b
+    * - ``V4L2_MPEG_VIDEO_MPEG4_LEVEL_1``
+      - Level 1
+    * - ``V4L2_MPEG_VIDEO_MPEG4_LEVEL_2``
+      - Level 2
+    * - ``V4L2_MPEG_VIDEO_MPEG4_LEVEL_3``
+      - Level 3
+    * - ``V4L2_MPEG_VIDEO_MPEG4_LEVEL_3B``
+      - Level 3b
+    * - ``V4L2_MPEG_VIDEO_MPEG4_LEVEL_4``
+      - Level 4
+    * - ``V4L2_MPEG_VIDEO_MPEG4_LEVEL_5``
+      - Level 5
+
+
+
+.. _v4l2-mpeg-video-h264-profile:
+
+``V4L2_CID_MPEG_VIDEO_H264_PROFILE``
+    (enum)
+
+enum v4l2_mpeg_video_h264_profile -
+    The profile information for H264. Applicable to the H264 encoder.
+    Possible values are:
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - ``V4L2_MPEG_VIDEO_H264_PROFILE_BASELINE``
+      - Baseline profile
+    * - ``V4L2_MPEG_VIDEO_H264_PROFILE_CONSTRAINED_BASELINE``
+      - Constrained Baseline profile
+    * - ``V4L2_MPEG_VIDEO_H264_PROFILE_MAIN``
+      - Main profile
+    * - ``V4L2_MPEG_VIDEO_H264_PROFILE_EXTENDED``
+      - Extended profile
+    * - ``V4L2_MPEG_VIDEO_H264_PROFILE_HIGH``
+      - High profile
+    * - ``V4L2_MPEG_VIDEO_H264_PROFILE_HIGH_10``
+      - High 10 profile
+    * - ``V4L2_MPEG_VIDEO_H264_PROFILE_HIGH_422``
+      - High 422 profile
+    * - ``V4L2_MPEG_VIDEO_H264_PROFILE_HIGH_444_PREDICTIVE``
+      - High 444 Predictive profile
+    * - ``V4L2_MPEG_VIDEO_H264_PROFILE_HIGH_10_INTRA``
+      - High 10 Intra profile
+    * - ``V4L2_MPEG_VIDEO_H264_PROFILE_HIGH_422_INTRA``
+      - High 422 Intra profile
+    * - ``V4L2_MPEG_VIDEO_H264_PROFILE_HIGH_444_INTRA``
+      - High 444 Intra profile
+    * - ``V4L2_MPEG_VIDEO_H264_PROFILE_CAVLC_444_INTRA``
+      - CAVLC 444 Intra profile
+    * - ``V4L2_MPEG_VIDEO_H264_PROFILE_SCALABLE_BASELINE``
+      - Scalable Baseline profile
+    * - ``V4L2_MPEG_VIDEO_H264_PROFILE_SCALABLE_HIGH``
+      - Scalable High profile
+    * - ``V4L2_MPEG_VIDEO_H264_PROFILE_SCALABLE_HIGH_INTRA``
+      - Scalable High Intra profile
+    * - ``V4L2_MPEG_VIDEO_H264_PROFILE_STEREO_HIGH``
+      - Stereo High profile
+    * - ``V4L2_MPEG_VIDEO_H264_PROFILE_MULTIVIEW_HIGH``
+      - Multiview High profile
+
+
+
+.. _v4l2-mpeg-video-mpeg4-profile:
+
+``V4L2_CID_MPEG_VIDEO_MPEG4_PROFILE``
+    (enum)
+
+enum v4l2_mpeg_video_mpeg4_profile -
+    The profile information for MPEG4. Applicable to the MPEG4 encoder.
+    Possible values are:
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - ``V4L2_MPEG_VIDEO_MPEG4_PROFILE_SIMPLE``
+      - Simple profile
+    * - ``V4L2_MPEG_VIDEO_MPEG4_PROFILE_ADVANCED_SIMPLE``
+      - Advanced Simple profile
+    * - ``V4L2_MPEG_VIDEO_MPEG4_PROFILE_CORE``
+      - Core profile
+    * - ``V4L2_MPEG_VIDEO_MPEG4_PROFILE_SIMPLE_SCALABLE``
+      - Simple Scalable profile
+    * - ``V4L2_MPEG_VIDEO_MPEG4_PROFILE_ADVANCED_CODING_EFFICIENCY``
+      -
+
+
+
+``V4L2_CID_MPEG_VIDEO_MAX_REF_PIC (integer)``
+    The maximum number of reference pictures used for encoding.
+    Applicable to the encoder.
+
+.. _v4l2-mpeg-video-multi-slice-mode:
+
+``V4L2_CID_MPEG_VIDEO_MULTI_SLICE_MODE``
+    (enum)
+
+enum v4l2_mpeg_video_multi_slice_mode -
+    Determines how the encoder should handle division of frame into
+    slices. Applicable to the encoder. Possible values are:
+
+
+
+.. tabularcolumns:: |p{8.7cm}|p{8.8cm}|
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - ``V4L2_MPEG_VIDEO_MULTI_SLICE_MODE_SINGLE``
+      - Single slice per frame.
+    * - ``V4L2_MPEG_VIDEO_MULTI_SLICE_MODE_MAX_MB``
+      - Multiple slices with set maximum number of macroblocks per slice.
+    * - ``V4L2_MPEG_VIDEO_MULTI_SLICE_MODE_MAX_BYTES``
+      - Multiple slice with set maximum size in bytes per slice.
+
+
+
+``V4L2_CID_MPEG_VIDEO_MULTI_SLICE_MAX_MB (integer)``
+    The maximum number of macroblocks in a slice. Used when
+    ``V4L2_CID_MPEG_VIDEO_MULTI_SLICE_MODE`` is set to
+    ``V4L2_MPEG_VIDEO_MULTI_SLICE_MODE_MAX_MB``. Applicable to the
+    encoder.
+
+``V4L2_CID_MPEG_VIDEO_MULTI_SLICE_MAX_BYTES (integer)``
+    The maximum size of a slice in bytes. Used when
+    ``V4L2_CID_MPEG_VIDEO_MULTI_SLICE_MODE`` is set to
+    ``V4L2_MPEG_VIDEO_MULTI_SLICE_MODE_MAX_BYTES``. Applicable to the
+    encoder.
+
+.. _v4l2-mpeg-video-h264-loop-filter-mode:
+
+``V4L2_CID_MPEG_VIDEO_H264_LOOP_FILTER_MODE``
+    (enum)
+
+enum v4l2_mpeg_video_h264_loop_filter_mode -
+    Loop filter mode for H264 encoder. Possible values are:
+
+
+
+.. tabularcolumns:: |p{14.0cm}|p{3.5cm}|
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - ``V4L2_MPEG_VIDEO_H264_LOOP_FILTER_MODE_ENABLED``
+      - Loop filter is enabled.
+    * - ``V4L2_MPEG_VIDEO_H264_LOOP_FILTER_MODE_DISABLED``
+      - Loop filter is disabled.
+    * - ``V4L2_MPEG_VIDEO_H264_LOOP_FILTER_MODE_DISABLED_AT_SLICE_BOUNDARY``
+      - Loop filter is disabled at the slice boundary.
+
+
+
+``V4L2_CID_MPEG_VIDEO_H264_LOOP_FILTER_ALPHA (integer)``
+    Loop filter alpha coefficient, defined in the H264 standard.
+    Applicable to the H264 encoder.
+
+``V4L2_CID_MPEG_VIDEO_H264_LOOP_FILTER_BETA (integer)``
+    Loop filter beta coefficient, defined in the H264 standard.
+    Applicable to the H264 encoder.
+
+.. _v4l2-mpeg-video-h264-entropy-mode:
+
+``V4L2_CID_MPEG_VIDEO_H264_ENTROPY_MODE``
+    (enum)
+
+enum v4l2_mpeg_video_h264_entropy_mode -
+    Entropy coding mode for H264 - CABAC/CAVALC. Applicable to the H264
+    encoder. Possible values are:
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - ``V4L2_MPEG_VIDEO_H264_ENTROPY_MODE_CAVLC``
+      - Use CAVLC entropy coding.
+    * - ``V4L2_MPEG_VIDEO_H264_ENTROPY_MODE_CABAC``
+      - Use CABAC entropy coding.
+
+
+
+``V4L2_CID_MPEG_VIDEO_H264_8X8_TRANSFORM (boolean)``
+    Enable 8X8 transform for H264. Applicable to the H264 encoder.
+
+``V4L2_CID_MPEG_VIDEO_CYCLIC_INTRA_REFRESH_MB (integer)``
+    Cyclic intra macroblock refresh. This is the number of continuous
+    macroblocks refreshed every frame. Each frame a successive set of
+    macroblocks is refreshed until the cycle completes and starts from
+    the top of the frame. Applicable to H264, H263 and MPEG4 encoder.
+
+``V4L2_CID_MPEG_VIDEO_FRAME_RC_ENABLE (boolean)``
+    Frame level rate control enable. If this control is disabled then
+    the quantization parameter for each frame type is constant and set
+    with appropriate controls (e.g.
+    ``V4L2_CID_MPEG_VIDEO_H263_I_FRAME_QP``). If frame rate control is
+    enabled then quantization parameter is adjusted to meet the chosen
+    bitrate. Minimum and maximum value for the quantization parameter
+    can be set with appropriate controls (e.g.
+    ``V4L2_CID_MPEG_VIDEO_H263_MIN_QP``). Applicable to encoders.
+
+``V4L2_CID_MPEG_VIDEO_MB_RC_ENABLE (boolean)``
+    Macroblock level rate control enable. Applicable to the MPEG4 and
+    H264 encoders.
+
+``V4L2_CID_MPEG_VIDEO_MPEG4_QPEL (boolean)``
+    Quarter pixel motion estimation for MPEG4. Applicable to the MPEG4
+    encoder.
+
+``V4L2_CID_MPEG_VIDEO_H263_I_FRAME_QP (integer)``
+    Quantization parameter for an I frame for H263. Valid range: from 1
+    to 31.
+
+``V4L2_CID_MPEG_VIDEO_H263_MIN_QP (integer)``
+    Minimum quantization parameter for H263. Valid range: from 1 to 31.
+
+``V4L2_CID_MPEG_VIDEO_H263_MAX_QP (integer)``
+    Maximum quantization parameter for H263. Valid range: from 1 to 31.
+
+``V4L2_CID_MPEG_VIDEO_H263_P_FRAME_QP (integer)``
+    Quantization parameter for an P frame for H263. Valid range: from 1
+    to 31.
+
+``V4L2_CID_MPEG_VIDEO_H263_B_FRAME_QP (integer)``
+    Quantization parameter for an B frame for H263. Valid range: from 1
+    to 31.
+
+``V4L2_CID_MPEG_VIDEO_H264_I_FRAME_QP (integer)``
+    Quantization parameter for an I frame for H264. Valid range: from 0
+    to 51.
+
+``V4L2_CID_MPEG_VIDEO_H264_MIN_QP (integer)``
+    Minimum quantization parameter for H264. Valid range: from 0 to 51.
+
+``V4L2_CID_MPEG_VIDEO_H264_MAX_QP (integer)``
+    Maximum quantization parameter for H264. Valid range: from 0 to 51.
+
+``V4L2_CID_MPEG_VIDEO_H264_P_FRAME_QP (integer)``
+    Quantization parameter for an P frame for H264. Valid range: from 0
+    to 51.
+
+``V4L2_CID_MPEG_VIDEO_H264_B_FRAME_QP (integer)``
+    Quantization parameter for an B frame for H264. Valid range: from 0
+    to 51.
+
+``V4L2_CID_MPEG_VIDEO_MPEG4_I_FRAME_QP (integer)``
+    Quantization parameter for an I frame for MPEG4. Valid range: from 1
+    to 31.
+
+``V4L2_CID_MPEG_VIDEO_MPEG4_MIN_QP (integer)``
+    Minimum quantization parameter for MPEG4. Valid range: from 1 to 31.
+
+``V4L2_CID_MPEG_VIDEO_MPEG4_MAX_QP (integer)``
+    Maximum quantization parameter for MPEG4. Valid range: from 1 to 31.
+
+``V4L2_CID_MPEG_VIDEO_MPEG4_P_FRAME_QP (integer)``
+    Quantization parameter for an P frame for MPEG4. Valid range: from 1
+    to 31.
+
+``V4L2_CID_MPEG_VIDEO_MPEG4_B_FRAME_QP (integer)``
+    Quantization parameter for an B frame for MPEG4. Valid range: from 1
+    to 31.
+
+``V4L2_CID_MPEG_VIDEO_VBV_SIZE (integer)``
+    The Video Buffer Verifier size in kilobytes, it is used as a
+    limitation of frame skip. The VBV is defined in the standard as a
+    mean to verify that the produced stream will be successfully
+    decoded. The standard describes it as "Part of a hypothetical
+    decoder that is conceptually connected to the output of the encoder.
+    Its purpose is to provide a constraint on the variability of the
+    data rate that an encoder or editing process may produce.".
+    Applicable to the MPEG1, MPEG2, MPEG4 encoders.
+
+.. _v4l2-mpeg-video-vbv-delay:
+
+``V4L2_CID_MPEG_VIDEO_VBV_DELAY (integer)``
+    Sets the initial delay in milliseconds for VBV buffer control.
+
+.. _v4l2-mpeg-video-hor-search-range:
+
+``V4L2_CID_MPEG_VIDEO_MV_H_SEARCH_RANGE (integer)``
+    Horizontal search range defines maximum horizontal search area in
+    pixels to search and match for the present Macroblock (MB) in the
+    reference picture. This V4L2 control macro is used to set horizontal
+    search range for motion estimation module in video encoder.
+
+.. _v4l2-mpeg-video-vert-search-range:
+
+``V4L2_CID_MPEG_VIDEO_MV_V_SEARCH_RANGE (integer)``
+    Vertical search range defines maximum vertical search area in pixels
+    to search and match for the present Macroblock (MB) in the reference
+    picture. This V4L2 control macro is used to set vertical search
+    range for motion estimation module in video encoder.
+
+.. _v4l2-mpeg-video-force-key-frame:
+
+``V4L2_CID_MPEG_VIDEO_FORCE_KEY_FRAME (button)``
+    Force a key frame for the next queued buffer. Applicable to
+    encoders. This is a general, codec-agnostic keyframe control.
+
+``V4L2_CID_MPEG_VIDEO_H264_CPB_SIZE (integer)``
+    The Coded Picture Buffer size in kilobytes, it is used as a
+    limitation of frame skip. The CPB is defined in the H264 standard as
+    a mean to verify that the produced stream will be successfully
+    decoded. Applicable to the H264 encoder.
+
+``V4L2_CID_MPEG_VIDEO_H264_I_PERIOD (integer)``
+    Period between I-frames in the open GOP for H264. In case of an open
+    GOP this is the period between two I-frames. The period between IDR
+    (Instantaneous Decoding Refresh) frames is taken from the GOP_SIZE
+    control. An IDR frame, which stands for Instantaneous Decoding
+    Refresh is an I-frame after which no prior frames are referenced.
+    This means that a stream can be restarted from an IDR frame without
+    the need to store or decode any previous frames. Applicable to the
+    H264 encoder.
+
+.. _v4l2-mpeg-video-header-mode:
+
+``V4L2_CID_MPEG_VIDEO_HEADER_MODE``
+    (enum)
+
+enum v4l2_mpeg_video_header_mode -
+    Determines whether the header is returned as the first buffer or is
+    it returned together with the first frame. Applicable to encoders.
+    Possible values are:
+
+
+
+.. tabularcolumns:: |p{10.3cm}|p{7.2cm}|
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - ``V4L2_MPEG_VIDEO_HEADER_MODE_SEPARATE``
+      - The stream header is returned separately in the first buffer.
+    * - ``V4L2_MPEG_VIDEO_HEADER_MODE_JOINED_WITH_1ST_FRAME``
+      - The stream header is returned together with the first encoded
+	frame.
+
+
+
+``V4L2_CID_MPEG_VIDEO_REPEAT_SEQ_HEADER (boolean)``
+    Repeat the video sequence headers. Repeating these headers makes
+    random access to the video stream easier. Applicable to the MPEG1, 2
+    and 4 encoder.
+
+``V4L2_CID_MPEG_VIDEO_DECODER_MPEG4_DEBLOCK_FILTER (boolean)``
+    Enabled the deblocking post processing filter for MPEG4 decoder.
+    Applicable to the MPEG4 decoder.
+
+``V4L2_CID_MPEG_VIDEO_MPEG4_VOP_TIME_RES (integer)``
+    vop_time_increment_resolution value for MPEG4. Applicable to the
+    MPEG4 encoder.
+
+``V4L2_CID_MPEG_VIDEO_MPEG4_VOP_TIME_INC (integer)``
+    vop_time_increment value for MPEG4. Applicable to the MPEG4
+    encoder.
+
+``V4L2_CID_MPEG_VIDEO_H264_SEI_FRAME_PACKING (boolean)``
+    Enable generation of frame packing supplemental enhancement
+    information in the encoded bitstream. The frame packing SEI message
+    contains the arrangement of L and R planes for 3D viewing.
+    Applicable to the H264 encoder.
+
+``V4L2_CID_MPEG_VIDEO_H264_SEI_FP_CURRENT_FRAME_0 (boolean)``
+    Sets current frame as frame0 in frame packing SEI. Applicable to the
+    H264 encoder.
+
+.. _v4l2-mpeg-video-h264-sei-fp-arrangement-type:
+
+``V4L2_CID_MPEG_VIDEO_H264_SEI_FP_ARRANGEMENT_TYPE``
+    (enum)
+
+enum v4l2_mpeg_video_h264_sei_fp_arrangement_type -
+    Frame packing arrangement type for H264 SEI. Applicable to the H264
+    encoder. Possible values are:
+
+.. tabularcolumns:: |p{12cm}|p{5.5cm}|
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - ``V4L2_MPEG_VIDEO_H264_SEI_FP_ARRANGEMENT_TYPE_CHEKERBOARD``
+      - Pixels are alternatively from L and R.
+    * - ``V4L2_MPEG_VIDEO_H264_SEI_FP_ARRANGEMENT_TYPE_COLUMN``
+      - L and R are interlaced by column.
+    * - ``V4L2_MPEG_VIDEO_H264_SEI_FP_ARRANGEMENT_TYPE_ROW``
+      - L and R are interlaced by row.
+    * - ``V4L2_MPEG_VIDEO_H264_SEI_FP_ARRANGEMENT_TYPE_SIDE_BY_SIDE``
+      - L is on the left, R on the right.
+    * - ``V4L2_MPEG_VIDEO_H264_SEI_FP_ARRANGEMENT_TYPE_TOP_BOTTOM``
+      - L is on top, R on bottom.
+    * - ``V4L2_MPEG_VIDEO_H264_SEI_FP_ARRANGEMENT_TYPE_TEMPORAL``
+      - One view per frame.
+
+
+
+``V4L2_CID_MPEG_VIDEO_H264_FMO (boolean)``
+    Enables flexible macroblock ordering in the encoded bitstream. It is
+    a technique used for restructuring the ordering of macroblocks in
+    pictures. Applicable to the H264 encoder.
+
+.. _v4l2-mpeg-video-h264-fmo-map-type:
+
+``V4L2_CID_MPEG_VIDEO_H264_FMO_MAP_TYPE``
+   (enum)
+
+enum v4l2_mpeg_video_h264_fmo_map_type -
+    When using FMO, the map type divides the image in different scan
+    patterns of macroblocks. Applicable to the H264 encoder. Possible
+    values are:
+
+.. tabularcolumns:: |p{12.5cm}|p{5.0cm}|
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - ``V4L2_MPEG_VIDEO_H264_FMO_MAP_TYPE_INTERLEAVED_SLICES``
+      - Slices are interleaved one after other with macroblocks in run
+	length order.
+    * - ``V4L2_MPEG_VIDEO_H264_FMO_MAP_TYPE_SCATTERED_SLICES``
+      - Scatters the macroblocks based on a mathematical function known to
+	both encoder and decoder.
+    * - ``V4L2_MPEG_VIDEO_H264_FMO_MAP_TYPE_FOREGROUND_WITH_LEFT_OVER``
+      - Macroblocks arranged in rectangular areas or regions of interest.
+    * - ``V4L2_MPEG_VIDEO_H264_FMO_MAP_TYPE_BOX_OUT``
+      - Slice groups grow in a cyclic way from centre to outwards.
+    * - ``V4L2_MPEG_VIDEO_H264_FMO_MAP_TYPE_RASTER_SCAN``
+      - Slice groups grow in raster scan pattern from left to right.
+    * - ``V4L2_MPEG_VIDEO_H264_FMO_MAP_TYPE_WIPE_SCAN``
+      - Slice groups grow in wipe scan pattern from top to bottom.
+    * - ``V4L2_MPEG_VIDEO_H264_FMO_MAP_TYPE_EXPLICIT``
+      - User defined map type.
+
+
+
+``V4L2_CID_MPEG_VIDEO_H264_FMO_SLICE_GROUP (integer)``
+    Number of slice groups in FMO. Applicable to the H264 encoder.
+
+.. _v4l2-mpeg-video-h264-fmo-change-direction:
+
+``V4L2_CID_MPEG_VIDEO_H264_FMO_CHANGE_DIRECTION``
+    (enum)
+
+enum v4l2_mpeg_video_h264_fmo_change_dir -
+    Specifies a direction of the slice group change for raster and wipe
+    maps. Applicable to the H264 encoder. Possible values are:
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - ``V4L2_MPEG_VIDEO_H264_FMO_CHANGE_DIR_RIGHT``
+      - Raster scan or wipe right.
+    * - ``V4L2_MPEG_VIDEO_H264_FMO_CHANGE_DIR_LEFT``
+      - Reverse raster scan or wipe left.
+
+
+
+``V4L2_CID_MPEG_VIDEO_H264_FMO_CHANGE_RATE (integer)``
+    Specifies the size of the first slice group for raster and wipe map.
+    Applicable to the H264 encoder.
+
+``V4L2_CID_MPEG_VIDEO_H264_FMO_RUN_LENGTH (integer)``
+    Specifies the number of consecutive macroblocks for the interleaved
+    map. Applicable to the H264 encoder.
+
+``V4L2_CID_MPEG_VIDEO_H264_ASO (boolean)``
+    Enables arbitrary slice ordering in encoded bitstream. Applicable to
+    the H264 encoder.
+
+``V4L2_CID_MPEG_VIDEO_H264_ASO_SLICE_ORDER (integer)``
+    Specifies the slice order in ASO. Applicable to the H264 encoder.
+    The supplied 32-bit integer is interpreted as follows (bit 0 = least
+    significant bit):
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - Bit 0:15
+      - Slice ID
+    * - Bit 16:32
+      - Slice position or order
+
+
+
+``V4L2_CID_MPEG_VIDEO_H264_HIERARCHICAL_CODING (boolean)``
+    Enables H264 hierarchical coding. Applicable to the H264 encoder.
+
+.. _v4l2-mpeg-video-h264-hierarchical-coding-type:
+
+``V4L2_CID_MPEG_VIDEO_H264_HIERARCHICAL_CODING_TYPE``
+    (enum)
+
+enum v4l2_mpeg_video_h264_hierarchical_coding_type -
+    Specifies the hierarchical coding type. Applicable to the H264
+    encoder. Possible values are:
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - ``V4L2_MPEG_VIDEO_H264_HIERARCHICAL_CODING_B``
+      - Hierarchical B coding.
+    * - ``V4L2_MPEG_VIDEO_H264_HIERARCHICAL_CODING_P``
+      - Hierarchical P coding.
+
+
+
+``V4L2_CID_MPEG_VIDEO_H264_HIERARCHICAL_CODING_LAYER (integer)``
+    Specifies the number of hierarchical coding layers. Applicable to
+    the H264 encoder.
+
+``V4L2_CID_MPEG_VIDEO_H264_HIERARCHICAL_CODING_LAYER_QP (integer)``
+    Specifies a user defined QP for each layer. Applicable to the H264
+    encoder. The supplied 32-bit integer is interpreted as follows (bit
+    0 = least significant bit):
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - Bit 0:15
+      - QP value
+    * - Bit 16:32
+      - Layer number
+
+
+
+
+MFC 5.1 MPEG Controls
+---------------------
+
+The following MPEG class controls deal with MPEG decoding and encoding
+settings that are specific to the Multi Format Codec 5.1 device present
+in the S5P family of SoCs by Samsung.
+
+
+.. _mfc51-control-id:
+
+MFC 5.1 Control IDs
+^^^^^^^^^^^^^^^^^^^
+
+``V4L2_CID_MPEG_MFC51_VIDEO_DECODER_H264_DISPLAY_DELAY_ENABLE (boolean)``
+    If the display delay is enabled then the decoder is forced to return
+    a CAPTURE buffer (decoded frame) after processing a certain number
+    of OUTPUT buffers. The delay can be set through
+    ``V4L2_CID_MPEG_MFC51_VIDEO_DECODER_H264_DISPLAY_DELAY``. This
+    feature can be used for example for generating thumbnails of videos.
+    Applicable to the H264 decoder.
+
+``V4L2_CID_MPEG_MFC51_VIDEO_DECODER_H264_DISPLAY_DELAY (integer)``
+    Display delay value for H264 decoder. The decoder is forced to
+    return a decoded frame after the set 'display delay' number of
+    frames. If this number is low it may result in frames returned out
+    of dispaly order, in addition the hardware may still be using the
+    returned buffer as a reference picture for subsequent frames.
+
+``V4L2_CID_MPEG_MFC51_VIDEO_H264_NUM_REF_PIC_FOR_P (integer)``
+    The number of reference pictures used for encoding a P picture.
+    Applicable to the H264 encoder.
+
+``V4L2_CID_MPEG_MFC51_VIDEO_PADDING (boolean)``
+    Padding enable in the encoder - use a color instead of repeating
+    border pixels. Applicable to encoders.
+
+``V4L2_CID_MPEG_MFC51_VIDEO_PADDING_YUV (integer)``
+    Padding color in the encoder. Applicable to encoders. The supplied
+    32-bit integer is interpreted as follows (bit 0 = least significant
+    bit):
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - Bit 0:7
+      - V chrominance information
+    * - Bit 8:15
+      - U chrominance information
+    * - Bit 16:23
+      - Y luminance information
+    * - Bit 24:31
+      - Must be zero.
+
+
+
+``V4L2_CID_MPEG_MFC51_VIDEO_RC_REACTION_COEFF (integer)``
+    Reaction coefficient for MFC rate control. Applicable to encoders.
+
+    .. note::
+
+       #. Valid only when the frame level RC is enabled.
+
+       #. For tight CBR, this field must be small (ex. 2 ~ 10). For
+	  VBR, this field must be large (ex. 100 ~ 1000).
+
+       #. It is not recommended to use the greater number than
+	  FRAME_RATE * (10^9 / BIT_RATE).
+
+``V4L2_CID_MPEG_MFC51_VIDEO_H264_ADAPTIVE_RC_DARK (boolean)``
+    Adaptive rate control for dark region. Valid only when H.264 and
+    macroblock level RC is enabled
+    (``V4L2_CID_MPEG_VIDEO_MB_RC_ENABLE``). Applicable to the H264
+    encoder.
+
+``V4L2_CID_MPEG_MFC51_VIDEO_H264_ADAPTIVE_RC_SMOOTH (boolean)``
+    Adaptive rate control for smooth region. Valid only when H.264 and
+    macroblock level RC is enabled
+    (``V4L2_CID_MPEG_VIDEO_MB_RC_ENABLE``). Applicable to the H264
+    encoder.
+
+``V4L2_CID_MPEG_MFC51_VIDEO_H264_ADAPTIVE_RC_STATIC (boolean)``
+    Adaptive rate control for static region. Valid only when H.264 and
+    macroblock level RC is enabled
+    (``V4L2_CID_MPEG_VIDEO_MB_RC_ENABLE``). Applicable to the H264
+    encoder.
+
+``V4L2_CID_MPEG_MFC51_VIDEO_H264_ADAPTIVE_RC_ACTIVITY (boolean)``
+    Adaptive rate control for activity region. Valid only when H.264 and
+    macroblock level RC is enabled
+    (``V4L2_CID_MPEG_VIDEO_MB_RC_ENABLE``). Applicable to the H264
+    encoder.
+
+.. _v4l2-mpeg-mfc51-video-frame-skip-mode:
+
+``V4L2_CID_MPEG_MFC51_VIDEO_FRAME_SKIP_MODE``
+    (enum)
+
+enum v4l2_mpeg_mfc51_video_frame_skip_mode -
+    Indicates in what conditions the encoder should skip frames. If
+    encoding a frame would cause the encoded stream to be larger then a
+    chosen data limit then the frame will be skipped. Possible values
+    are:
+
+
+.. tabularcolumns:: |p{9.0cm}|p{8.5cm}|
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - ``V4L2_MPEG_MFC51_FRAME_SKIP_MODE_DISABLED``
+      - Frame skip mode is disabled.
+    * - ``V4L2_MPEG_MFC51_FRAME_SKIP_MODE_LEVEL_LIMIT``
+      - Frame skip mode enabled and buffer limit is set by the chosen
+	level and is defined by the standard.
+    * - ``V4L2_MPEG_MFC51_FRAME_SKIP_MODE_BUF_LIMIT``
+      - Frame skip mode enabled and buffer limit is set by the VBV
+	(MPEG1/2/4) or CPB (H264) buffer size control.
+
+
+
+``V4L2_CID_MPEG_MFC51_VIDEO_RC_FIXED_TARGET_BIT (integer)``
+    Enable rate-control with fixed target bit. If this setting is
+    enabled, then the rate control logic of the encoder will calculate
+    the average bitrate for a GOP and keep it below or equal the set
+    bitrate target. Otherwise the rate control logic calculates the
+    overall average bitrate for the stream and keeps it below or equal
+    to the set bitrate. In the first case the average bitrate for the
+    whole stream will be smaller then the set bitrate. This is caused
+    because the average is calculated for smaller number of frames, on
+    the other hand enabling this setting will ensure that the stream
+    will meet tight bandwidth constraints. Applicable to encoders.
+
+.. _v4l2-mpeg-mfc51-video-force-frame-type:
+
+``V4L2_CID_MPEG_MFC51_VIDEO_FORCE_FRAME_TYPE``
+    (enum)
+
+enum v4l2_mpeg_mfc51_video_force_frame_type -
+    Force a frame type for the next queued buffer. Applicable to
+    encoders. Possible values are:
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - ``V4L2_MPEG_MFC51_FORCE_FRAME_TYPE_DISABLED``
+      - Forcing a specific frame type disabled.
+    * - ``V4L2_MPEG_MFC51_FORCE_FRAME_TYPE_I_FRAME``
+      - Force an I-frame.
+    * - ``V4L2_MPEG_MFC51_FORCE_FRAME_TYPE_NOT_CODED``
+      - Force a non-coded frame.
+
+
+
+
+CX2341x MPEG Controls
+---------------------
+
+The following MPEG class controls deal with MPEG encoding settings that
+are specific to the Conexant CX23415 and CX23416 MPEG encoding chips.
+
+
+.. _cx2341x-control-id:
+
+CX2341x Control IDs
+^^^^^^^^^^^^^^^^^^^
+
+.. _v4l2-mpeg-cx2341x-video-spatial-filter-mode:
+
+``V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE``
+    (enum)
+
+enum v4l2_mpeg_cx2341x_video_spatial_filter_mode -
+    Sets the Spatial Filter mode (default ``MANUAL``). Possible values
+    are:
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - ``V4L2_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE_MANUAL``
+      - Choose the filter manually
+    * - ``V4L2_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE_AUTO``
+      - Choose the filter automatically
+
+
+
+``V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER (integer (0-15))``
+    The setting for the Spatial Filter. 0 = off, 15 = maximum. (Default
+    is 0.)
+
+.. _luma-spatial-filter-type:
+
+``V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE``
+    (enum)
+
+enum v4l2_mpeg_cx2341x_video_luma_spatial_filter_type -
+    Select the algorithm to use for the Luma Spatial Filter (default
+    ``1D_HOR``). Possible values:
+
+
+
+.. tabularcolumns:: |p{14.5cm}|p{3.0cm}|
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - ``V4L2_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE_OFF``
+      - No filter
+    * - ``V4L2_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE_1D_HOR``
+      - One-dimensional horizontal
+    * - ``V4L2_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE_1D_VERT``
+      - One-dimensional vertical
+    * - ``V4L2_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE_2D_HV_SEPARABLE``
+      - Two-dimensional separable
+    * - ``V4L2_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE_2D_SYM_NON_SEPARABLE``
+      - Two-dimensional symmetrical non-separable
+
+
+
+.. _chroma-spatial-filter-type:
+
+``V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_SPATIAL_FILTER_TYPE``
+    (enum)
+
+enum v4l2_mpeg_cx2341x_video_chroma_spatial_filter_type -
+    Select the algorithm for the Chroma Spatial Filter (default
+    ``1D_HOR``). Possible values are:
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - ``V4L2_MPEG_CX2341X_VIDEO_CHROMA_SPATIAL_FILTER_TYPE_OFF``
+      - No filter
+    * - ``V4L2_MPEG_CX2341X_VIDEO_CHROMA_SPATIAL_FILTER_TYPE_1D_HOR``
+      - One-dimensional horizontal
+
+
+
+.. _v4l2-mpeg-cx2341x-video-temporal-filter-mode:
+
+``V4L2_CID_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE``
+    (enum)
+
+enum v4l2_mpeg_cx2341x_video_temporal_filter_mode -
+    Sets the Temporal Filter mode (default ``MANUAL``). Possible values
+    are:
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - ``V4L2_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE_MANUAL``
+      - Choose the filter manually
+    * - ``V4L2_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE_AUTO``
+      - Choose the filter automatically
+
+
+
+``V4L2_CID_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER (integer (0-31))``
+    The setting for the Temporal Filter. 0 = off, 31 = maximum. (Default
+    is 8 for full-scale capturing and 0 for scaled capturing.)
+
+.. _v4l2-mpeg-cx2341x-video-median-filter-type:
+
+``V4L2_CID_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE``
+    (enum)
+
+enum v4l2_mpeg_cx2341x_video_median_filter_type -
+    Median Filter Type (default ``OFF``). Possible values are:
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - ``V4L2_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE_OFF``
+      - No filter
+    * - ``V4L2_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE_HOR``
+      - Horizontal filter
+    * - ``V4L2_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE_VERT``
+      - Vertical filter
+    * - ``V4L2_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE_HOR_VERT``
+      - Horizontal and vertical filter
+    * - ``V4L2_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE_DIAG``
+      - Diagonal filter
+
+
+
+``V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_MEDIAN_FILTER_BOTTOM (integer (0-255))``
+    Threshold above which the luminance median filter is enabled
+    (default 0)
+
+``V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_MEDIAN_FILTER_TOP (integer (0-255))``
+    Threshold below which the luminance median filter is enabled
+    (default 255)
+
+``V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_MEDIAN_FILTER_BOTTOM (integer (0-255))``
+    Threshold above which the chroma median filter is enabled (default
+    0)
+
+``V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_MEDIAN_FILTER_TOP (integer (0-255))``
+    Threshold below which the chroma median filter is enabled (default
+    255)
+
+``V4L2_CID_MPEG_CX2341X_STREAM_INSERT_NAV_PACKETS (boolean)``
+    The CX2341X MPEG encoder can insert one empty MPEG-2 PES packet into
+    the stream between every four video frames. The packet size is 2048
+    bytes, including the packet_start_code_prefix and stream_id
+    fields. The stream_id is 0xBF (private stream 2). The payload
+    consists of 0x00 bytes, to be filled in by the application. 0 = do
+    not insert, 1 = insert packets.
+
+
+VPX Control Reference
+---------------------
+
+The VPX controls include controls for encoding parameters of VPx video
+codec.
+
+
+.. _vpx-control-id:
+
+VPX Control IDs
+^^^^^^^^^^^^^^^
+
+.. _v4l2-vpx-num-partitions:
+
+``V4L2_CID_MPEG_VIDEO_VPX_NUM_PARTITIONS``
+    (enum)
+
+enum v4l2_vp8_num_partitions -
+    The number of token partitions to use in VP8 encoder. Possible
+    values are:
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - ``V4L2_CID_MPEG_VIDEO_VPX_1_PARTITION``
+      - 1 coefficient partition
+    * - ``V4L2_CID_MPEG_VIDEO_VPX_2_PARTITIONS``
+      - 2 coefficient partitions
+    * - ``V4L2_CID_MPEG_VIDEO_VPX_4_PARTITIONS``
+      - 4 coefficient partitions
+    * - ``V4L2_CID_MPEG_VIDEO_VPX_8_PARTITIONS``
+      - 8 coefficient partitions
+
+
+
+``V4L2_CID_MPEG_VIDEO_VPX_IMD_DISABLE_4X4 (boolean)``
+    Setting this prevents intra 4x4 mode in the intra mode decision.
+
+.. _v4l2-vpx-num-ref-frames:
+
+``V4L2_CID_MPEG_VIDEO_VPX_NUM_REF_FRAMES``
+    (enum)
+
+enum v4l2_vp8_num_ref_frames -
+    The number of reference pictures for encoding P frames. Possible
+    values are:
+
+.. tabularcolumns:: |p{7.9cm}|p{9.6cm}|
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - ``V4L2_CID_MPEG_VIDEO_VPX_1_REF_FRAME``
+      - Last encoded frame will be searched
+    * - ``V4L2_CID_MPEG_VIDEO_VPX_2_REF_FRAME``
+      - Two frames will be searched among the last encoded frame, the
+	golden frame and the alternate reference (altref) frame. The
+	encoder implementation will decide which two are chosen.
+    * - ``V4L2_CID_MPEG_VIDEO_VPX_3_REF_FRAME``
+      - The last encoded frame, the golden frame and the altref frame will
+	be searched.
+
+
+
+``V4L2_CID_MPEG_VIDEO_VPX_FILTER_LEVEL (integer)``
+    Indicates the loop filter level. The adjustment of the loop filter
+    level is done via a delta value against a baseline loop filter
+    value.
+
+``V4L2_CID_MPEG_VIDEO_VPX_FILTER_SHARPNESS (integer)``
+    This parameter affects the loop filter. Anything above zero weakens
+    the deblocking effect on the loop filter.
+
+``V4L2_CID_MPEG_VIDEO_VPX_GOLDEN_FRAME_REF_PERIOD (integer)``
+    Sets the refresh period for the golden frame. The period is defined
+    in number of frames. For a value of 'n', every nth frame starting
+    from the first key frame will be taken as a golden frame. For eg.
+    for encoding sequence of 0, 1, 2, 3, 4, 5, 6, 7 where the golden
+    frame refresh period is set as 4, the frames 0, 4, 8 etc will be
+    taken as the golden frames as frame 0 is always a key frame.
+
+.. _v4l2-vpx-golden-frame-sel:
+
+``V4L2_CID_MPEG_VIDEO_VPX_GOLDEN_FRAME_SEL``
+    (enum)
+
+enum v4l2_vp8_golden_frame_sel -
+    Selects the golden frame for encoding. Possible values are:
+
+.. raw:: latex
+
+    \footnotesize
+
+.. tabularcolumns:: |p{9.0cm}|p{8.0cm}|
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - ``V4L2_CID_MPEG_VIDEO_VPX_GOLDEN_FRAME_USE_PREV``
+      - Use the (n-2)th frame as a golden frame, current frame index being
+	'n'.
+    * - ``V4L2_CID_MPEG_VIDEO_VPX_GOLDEN_FRAME_USE_REF_PERIOD``
+      - Use the previous specific frame indicated by
+	``V4L2_CID_MPEG_VIDEO_VPX_GOLDEN_FRAME_REF_PERIOD`` as a
+	golden frame.
+
+.. raw:: latex
+
+    \normalsize
+
+
+``V4L2_CID_MPEG_VIDEO_VPX_MIN_QP (integer)``
+    Minimum quantization parameter for VP8.
+
+``V4L2_CID_MPEG_VIDEO_VPX_MAX_QP (integer)``
+    Maximum quantization parameter for VP8.
+
+``V4L2_CID_MPEG_VIDEO_VPX_I_FRAME_QP (integer)``
+    Quantization parameter for an I frame for VP8.
+
+``V4L2_CID_MPEG_VIDEO_VPX_P_FRAME_QP (integer)``
+    Quantization parameter for a P frame for VP8.
+
+.. _v4l2-mpeg-video-vp8-profile:
+
+``V4L2_CID_MPEG_VIDEO_VP8_PROFILE``
+    (enum)
+
+enum v4l2_mpeg_video_vp8_profile -
+    This control allows selecting the profile for VP8 encoder.
+    This is also used to enumerate supported profiles by VP8 encoder or decoder.
+    Possible values are:
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - ``V4L2_MPEG_VIDEO_VP8_PROFILE_0``
+      - Profile 0
+    * - ``V4L2_MPEG_VIDEO_VP8_PROFILE_1``
+      - Profile 1
+    * - ``V4L2_MPEG_VIDEO_VP8_PROFILE_2``
+      - Profile 2
+    * - ``V4L2_MPEG_VIDEO_VP8_PROFILE_3``
+      - Profile 3
+
+.. _v4l2-mpeg-video-vp9-profile:
+
+``V4L2_CID_MPEG_VIDEO_VP9_PROFILE``
+    (enum)
+
+enum v4l2_mpeg_video_vp9_profile -
+    This control allows selecting the profile for VP9 encoder.
+    This is also used to enumerate supported profiles by VP9 encoder or decoder.
+    Possible values are:
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - ``V4L2_MPEG_VIDEO_VP9_PROFILE_0``
+      - Profile 0
+    * - ``V4L2_MPEG_VIDEO_VP9_PROFILE_1``
+      - Profile 1
+    * - ``V4L2_MPEG_VIDEO_VP9_PROFILE_2``
+      - Profile 2
+    * - ``V4L2_MPEG_VIDEO_VP9_PROFILE_3``
+      - Profile 3
+
+
+High Efficiency Video Coding (HEVC/H.265) Control Reference
+-----------------------------------------------------------
+
+The HEVC/H.265 controls include controls for encoding parameters of HEVC/H.265
+video codec.
+
+
+.. _hevc-control-id:
+
+HEVC/H.265 Control IDs
+^^^^^^^^^^^^^^^^^^^^^^
+
+``V4L2_CID_MPEG_VIDEO_HEVC_MIN_QP (integer)``
+    Minimum quantization parameter for HEVC.
+    Valid range: from 0 to 51.
+
+``V4L2_CID_MPEG_VIDEO_HEVC_MAX_QP (integer)``
+    Maximum quantization parameter for HEVC.
+    Valid range: from 0 to 51.
+
+``V4L2_CID_MPEG_VIDEO_HEVC_I_FRAME_QP (integer)``
+    Quantization parameter for an I frame for HEVC.
+    Valid range: [V4L2_CID_MPEG_VIDEO_HEVC_MIN_QP,
+    V4L2_CID_MPEG_VIDEO_HEVC_MAX_QP].
+
+``V4L2_CID_MPEG_VIDEO_HEVC_P_FRAME_QP (integer)``
+    Quantization parameter for a P frame for HEVC.
+    Valid range: [V4L2_CID_MPEG_VIDEO_HEVC_MIN_QP,
+    V4L2_CID_MPEG_VIDEO_HEVC_MAX_QP].
+
+``V4L2_CID_MPEG_VIDEO_HEVC_B_FRAME_QP (integer)``
+    Quantization parameter for a B frame for HEVC.
+    Valid range: [V4L2_CID_MPEG_VIDEO_HEVC_MIN_QP,
+    V4L2_CID_MPEG_VIDEO_HEVC_MAX_QP].
+
+``V4L2_CID_MPEG_VIDEO_HEVC_HIER_QP (boolean)``
+    HIERARCHICAL_QP allows the host to specify the quantization parameter
+    values for each temporal layer through HIERARCHICAL_QP_LAYER. This is
+    valid only if HIERARCHICAL_CODING_LAYER is greater than 1. Setting the
+    control value to 1 enables setting of the QP values for the layers.
+
+.. _v4l2-hevc-hier-coding-type:
+
+``V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_TYPE``
+    (enum)
+
+enum v4l2_mpeg_video_hevc_hier_coding_type -
+    Selects the hierarchical coding type for encoding. Possible values are:
+
+.. raw:: latex
+
+    \footnotesize
+
+.. tabularcolumns:: |p{9.0cm}|p{8.0cm}|
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - ``V4L2_MPEG_VIDEO_HEVC_HIERARCHICAL_CODING_B``
+      - Use the B frame for hierarchical coding.
+    * - ``V4L2_MPEG_VIDEO_HEVC_HIERARCHICAL_CODING_P``
+      - Use the P frame for hierarchical coding.
+
+.. raw:: latex
+
+    \normalsize
+
+
+``V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_LAYER (integer)``
+    Selects the hierarchical coding layer. In normal encoding
+    (non-hierarchial coding), it should be zero. Possible values are [0, 6].
+    0 indicates HIERARCHICAL CODING LAYER 0, 1 indicates HIERARCHICAL CODING
+    LAYER 1 and so on.
+
+``V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_L0_QP (integer)``
+    Indicates quantization parameter for hierarchical coding layer 0.
+    Valid range: [V4L2_CID_MPEG_VIDEO_HEVC_MIN_QP,
+    V4L2_CID_MPEG_VIDEO_HEVC_MAX_QP].
+
+``V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_L1_QP (integer)``
+    Indicates quantization parameter for hierarchical coding layer 1.
+    Valid range: [V4L2_CID_MPEG_VIDEO_HEVC_MIN_QP,
+    V4L2_CID_MPEG_VIDEO_HEVC_MAX_QP].
+
+``V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_L2_QP (integer)``
+    Indicates quantization parameter for hierarchical coding layer 2.
+    Valid range: [V4L2_CID_MPEG_VIDEO_HEVC_MIN_QP,
+    V4L2_CID_MPEG_VIDEO_HEVC_MAX_QP].
+
+``V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_L3_QP (integer)``
+    Indicates quantization parameter for hierarchical coding layer 3.
+    Valid range: [V4L2_CID_MPEG_VIDEO_HEVC_MIN_QP,
+    V4L2_CID_MPEG_VIDEO_HEVC_MAX_QP].
+
+``V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_L4_QP (integer)``
+    Indicates quantization parameter for hierarchical coding layer 4.
+    Valid range: [V4L2_CID_MPEG_VIDEO_HEVC_MIN_QP,
+    V4L2_CID_MPEG_VIDEO_HEVC_MAX_QP].
+
+``V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_L5_QP (integer)``
+    Indicates quantization parameter for hierarchical coding layer 5.
+    Valid range: [V4L2_CID_MPEG_VIDEO_HEVC_MIN_QP,
+    V4L2_CID_MPEG_VIDEO_HEVC_MAX_QP].
+
+``V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_L6_QP (integer)``
+    Indicates quantization parameter for hierarchical coding layer 6.
+    Valid range: [V4L2_CID_MPEG_VIDEO_HEVC_MIN_QP,
+    V4L2_CID_MPEG_VIDEO_HEVC_MAX_QP].
+
+.. _v4l2-hevc-profile:
+
+``V4L2_CID_MPEG_VIDEO_HEVC_PROFILE``
+    (enum)
+
+enum v4l2_mpeg_video_hevc_profile -
+    Select the desired profile for HEVC encoder.
+
+.. raw:: latex
+
+    \footnotesize
+
+.. tabularcolumns:: |p{9.0cm}|p{8.0cm}|
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - ``V4L2_MPEG_VIDEO_HEVC_PROFILE_MAIN``
+      - Main profile.
+    * - ``V4L2_MPEG_VIDEO_HEVC_PROFILE_MAIN_STILL_PICTURE``
+      - Main still picture profile.
+    * - ``V4L2_MPEG_VIDEO_HEVC_PROFILE_MAIN_10``
+      - Main 10 profile.
+
+.. raw:: latex
+
+    \normalsize
+
+
+.. _v4l2-hevc-level:
+
+``V4L2_CID_MPEG_VIDEO_HEVC_LEVEL``
+    (enum)
+
+enum v4l2_mpeg_video_hevc_level -
+    Selects the desired level for HEVC encoder.
+
+.. raw:: latex
+
+    \footnotesize
+
+.. tabularcolumns:: |p{9.0cm}|p{8.0cm}|
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_1``
+      - Level 1.0
+    * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_2``
+      - Level 2.0
+    * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_2_1``
+      - Level 2.1
+    * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_3``
+      - Level 3.0
+    * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_3_1``
+      - Level 3.1
+    * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_4``
+      - Level 4.0
+    * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_4_1``
+      - Level 4.1
+    * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_5``
+      - Level 5.0
+    * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_5_1``
+      - Level 5.1
+    * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_5_2``
+      - Level 5.2
+    * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_6``
+      - Level 6.0
+    * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_6_1``
+      - Level 6.1
+    * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_6_2``
+      - Level 6.2
+
+.. raw:: latex
+
+    \normalsize
+
+
+``V4L2_CID_MPEG_VIDEO_HEVC_FRAME_RATE_RESOLUTION (integer)``
+    Indicates the number of evenly spaced subintervals, called ticks, within
+    one second. This is a 16 bit unsigned integer and has a maximum value up to
+    0xffff and a minimum value of 1.
+
+.. _v4l2-hevc-tier:
+
+``V4L2_CID_MPEG_VIDEO_HEVC_TIER``
+    (enum)
+
+enum v4l2_mpeg_video_hevc_tier -
+    TIER_FLAG specifies tiers information of the HEVC encoded picture. Tier
+    were made to deal with applications that differ in terms of maximum bit
+    rate. Setting the flag to 0 selects HEVC tier as Main tier and setting
+    this flag to 1 indicates High tier. High tier is for applications requiring
+    high bit rates.
+
+.. raw:: latex
+
+    \footnotesize
+
+.. tabularcolumns:: |p{9.0cm}|p{8.0cm}|
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - ``V4L2_MPEG_VIDEO_HEVC_TIER_MAIN``
+      - Main tier.
+    * - ``V4L2_MPEG_VIDEO_HEVC_TIER_HIGH``
+      - High tier.
+
+.. raw:: latex
+
+    \normalsize
+
+
+``V4L2_CID_MPEG_VIDEO_HEVC_MAX_PARTITION_DEPTH (integer)``
+    Selects HEVC maximum coding unit depth.
+
+.. _v4l2-hevc-loop-filter-mode:
+
+``V4L2_CID_MPEG_VIDEO_HEVC_LOOP_FILTER_MODE``
+    (enum)
+
+enum v4l2_mpeg_video_hevc_loop_filter_mode -
+    Loop filter mode for HEVC encoder. Possible values are:
+
+.. raw:: latex
+
+    \footnotesize
+
+.. tabularcolumns:: |p{10.7cm}|p{6.3cm}|
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - ``V4L2_MPEG_VIDEO_HEVC_LOOP_FILTER_MODE_DISABLED``
+      - Loop filter is disabled.
+    * - ``V4L2_MPEG_VIDEO_HEVC_LOOP_FILTER_MODE_ENABLED``
+      - Loop filter is enabled.
+    * - ``V4L2_MPEG_VIDEO_HEVC_LOOP_FILTER_MODE_DISABLED_AT_SLICE_BOUNDARY``
+      - Loop filter is disabled at the slice boundary.
+
+.. raw:: latex
+
+    \normalsize
+
+
+``V4L2_CID_MPEG_VIDEO_HEVC_LF_BETA_OFFSET_DIV2 (integer)``
+    Selects HEVC loop filter beta offset. The valid range is [-6, +6].
+
+``V4L2_CID_MPEG_VIDEO_HEVC_LF_TC_OFFSET_DIV2 (integer)``
+    Selects HEVC loop filter tc offset. The valid range is [-6, +6].
+
+.. _v4l2-hevc-refresh-type:
+
+``V4L2_CID_MPEG_VIDEO_HEVC_REFRESH_TYPE``
+    (enum)
+
+enum v4l2_mpeg_video_hevc_hier_refresh_type -
+    Selects refresh type for HEVC encoder.
+    Host has to specify the period into
+    V4L2_CID_MPEG_VIDEO_HEVC_REFRESH_PERIOD.
+
+.. raw:: latex
+
+    \footnotesize
+
+.. tabularcolumns:: |p{8.0cm}|p{9.0cm}|
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - ``V4L2_MPEG_VIDEO_HEVC_REFRESH_NONE``
+      - Use the B frame for hierarchical coding.
+    * - ``V4L2_MPEG_VIDEO_HEVC_REFRESH_CRA``
+      - Use CRA (Clean Random Access Unit) picture encoding.
+    * - ``V4L2_MPEG_VIDEO_HEVC_REFRESH_IDR``
+      - Use IDR (Instantaneous Decoding Refresh) picture encoding.
+
+.. raw:: latex
+
+    \normalsize
+
+
+``V4L2_CID_MPEG_VIDEO_HEVC_REFRESH_PERIOD (integer)``
+    Selects the refresh period for HEVC encoder.
+    This specifies the number of I pictures between two CRA/IDR pictures.
+    This is valid only if REFRESH_TYPE is not 0.
+
+``V4L2_CID_MPEG_VIDEO_HEVC_LOSSLESS_CU (boolean)``
+    Indicates HEVC lossless encoding. Setting it to 0 disables lossless
+    encoding. Setting it to 1 enables lossless encoding.
+
+``V4L2_CID_MPEG_VIDEO_HEVC_CONST_INTRA_PRED (boolean)``
+    Indicates constant intra prediction for HEVC encoder. Specifies the
+    constrained intra prediction in which intra largest coding unit (LCU)
+    prediction is performed by using residual data and decoded samples of
+    neighboring intra LCU only. Setting the value to 1 enables constant intra
+    prediction and setting the value to 0 disables constant intra prediction.
+
+``V4L2_CID_MPEG_VIDEO_HEVC_WAVEFRONT (boolean)``
+    Indicates wavefront parallel processing for HEVC encoder. Setting it to 0
+    disables the feature and setting it to 1 enables the wavefront parallel
+    processing.
+
+``V4L2_CID_MPEG_VIDEO_HEVC_GENERAL_PB (boolean)``
+    Setting the value to 1 enables combination of P and B frame for HEVC
+    encoder.
+
+``V4L2_CID_MPEG_VIDEO_HEVC_TEMPORAL_ID (boolean)``
+    Indicates temporal identifier for HEVC encoder which is enabled by
+    setting the value to 1.
+
+``V4L2_CID_MPEG_VIDEO_HEVC_STRONG_SMOOTHING (boolean)``
+    Indicates bi-linear interpolation is conditionally used in the intra
+    prediction filtering process in the CVS when set to 1. Indicates bi-linear
+    interpolation is not used in the CVS when set to 0.
+
+``V4L2_CID_MPEG_VIDEO_HEVC_MAX_NUM_MERGE_MV_MINUS1 (integer)``
+    Indicates maximum number of merge candidate motion vectors.
+    Values are from 0 to 4.
+
+``V4L2_CID_MPEG_VIDEO_HEVC_TMV_PREDICTION (boolean)``
+    Indicates temporal motion vector prediction for HEVC encoder. Setting it to
+    1 enables the prediction. Setting it to 0 disables the prediction.
+
+``V4L2_CID_MPEG_VIDEO_HEVC_WITHOUT_STARTCODE (boolean)``
+    Specifies if HEVC generates a stream with a size of the length field
+    instead of start code pattern. The size of the length field is configurable
+    through the V4L2_CID_MPEG_VIDEO_HEVC_SIZE_OF_LENGTH_FIELD control. Setting
+    the value to 0 disables encoding without startcode pattern. Setting the
+    value to 1 will enables encoding without startcode pattern.
+
+.. _v4l2-hevc-size-of-length-field:
+
+``V4L2_CID_MPEG_VIDEO_HEVC_SIZE_OF_LENGTH_FIELD``
+(enum)
+
+enum v4l2_mpeg_video_hevc_size_of_length_field -
+    Indicates the size of length field.
+    This is valid when encoding WITHOUT_STARTCODE_ENABLE is enabled.
+
+.. raw:: latex
+
+    \footnotesize
+
+.. tabularcolumns:: |p{6.0cm}|p{11.0cm}|
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - ``V4L2_MPEG_VIDEO_HEVC_SIZE_0``
+      - Generate start code pattern (Normal).
+    * - ``V4L2_MPEG_VIDEO_HEVC_SIZE_1``
+      - Generate size of length field instead of start code pattern and length is 1.
+    * - ``V4L2_MPEG_VIDEO_HEVC_SIZE_2``
+      - Generate size of length field instead of start code pattern and length is 2.
+    * - ``V4L2_MPEG_VIDEO_HEVC_SIZE_4``
+      - Generate size of length field instead of start code pattern and length is 4.
+
+.. raw:: latex
+
+    \normalsize
+
+``V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_L0_BR (integer)``
+    Indicates bit rate for hierarchical coding layer 0 for HEVC encoder.
+
+``V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_L1_BR (integer)``
+    Indicates bit rate for hierarchical coding layer 1 for HEVC encoder.
+
+``V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_L2_BR (integer)``
+    Indicates bit rate for hierarchical coding layer 2 for HEVC encoder.
+
+``V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_L3_BR (integer)``
+    Indicates bit rate for hierarchical coding layer 3 for HEVC encoder.
+
+``V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_L4_BR (integer)``
+    Indicates bit rate for hierarchical coding layer 4 for HEVC encoder.
+
+``V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_L5_BR (integer)``
+    Indicates bit rate for hierarchical coding layer 5 for HEVC encoder.
+
+``V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_L6_BR (integer)``
+    Indicates bit rate for hierarchical coding layer 6 for HEVC encoder.
+
+``V4L2_CID_MPEG_VIDEO_REF_NUMBER_FOR_PFRAMES (integer)``
+    Selects number of P reference pictures required for HEVC encoder.
+    P-Frame can use 1 or 2 frames for reference.
+
+``V4L2_CID_MPEG_VIDEO_PREPEND_SPSPPS_TO_IDR (integer)``
+    Indicates whether to generate SPS and PPS at every IDR. Setting it to 0
+    disables generating SPS and PPS at every IDR. Setting it to one enables
+    generating SPS and PPS at every IDR.
+
+
+.. _camera-controls:
+
+Camera Control Reference
+========================
+
+The Camera class includes controls for mechanical (or equivalent
+digital) features of a device such as controllable lenses or sensors.
+
+
+.. _camera-control-id:
+
+Camera Control IDs
+------------------
+
+``V4L2_CID_CAMERA_CLASS (class)``
+    The Camera class descriptor. Calling
+    :ref:`VIDIOC_QUERYCTRL` for this control will
+    return a description of this control class.
+
+.. _v4l2-exposure-auto-type:
+
+``V4L2_CID_EXPOSURE_AUTO``
+    (enum)
+
+enum v4l2_exposure_auto_type -
+    Enables automatic adjustments of the exposure time and/or iris
+    aperture. The effect of manual changes of the exposure time or iris
+    aperture while these features are enabled is undefined, drivers
+    should ignore such requests. Possible values are:
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - ``V4L2_EXPOSURE_AUTO``
+      - Automatic exposure time, automatic iris aperture.
+    * - ``V4L2_EXPOSURE_MANUAL``
+      - Manual exposure time, manual iris.
+    * - ``V4L2_EXPOSURE_SHUTTER_PRIORITY``
+      - Manual exposure time, auto iris.
+    * - ``V4L2_EXPOSURE_APERTURE_PRIORITY``
+      - Auto exposure time, manual iris.
+
+
+
+``V4L2_CID_EXPOSURE_ABSOLUTE (integer)``
+    Determines the exposure time of the camera sensor. The exposure time
+    is limited by the frame interval. Drivers should interpret the
+    values as 100 µs units, where the value 1 stands for 1/10000th of a
+    second, 10000 for 1 second and 100000 for 10 seconds.
+
+``V4L2_CID_EXPOSURE_AUTO_PRIORITY (boolean)``
+    When ``V4L2_CID_EXPOSURE_AUTO`` is set to ``AUTO`` or
+    ``APERTURE_PRIORITY``, this control determines if the device may
+    dynamically vary the frame rate. By default this feature is disabled
+    (0) and the frame rate must remain constant.
+
+``V4L2_CID_AUTO_EXPOSURE_BIAS (integer menu)``
+    Determines the automatic exposure compensation, it is effective only
+    when ``V4L2_CID_EXPOSURE_AUTO`` control is set to ``AUTO``,
+    ``SHUTTER_PRIORITY`` or ``APERTURE_PRIORITY``. It is expressed in
+    terms of EV, drivers should interpret the values as 0.001 EV units,
+    where the value 1000 stands for +1 EV.
+
+    Increasing the exposure compensation value is equivalent to
+    decreasing the exposure value (EV) and will increase the amount of
+    light at the image sensor. The camera performs the exposure
+    compensation by adjusting absolute exposure time and/or aperture.
+
+.. _v4l2-exposure-metering:
+
+``V4L2_CID_EXPOSURE_METERING``
+    (enum)
+
+enum v4l2_exposure_metering -
+    Determines how the camera measures the amount of light available for
+    the frame exposure. Possible values are:
+
+.. tabularcolumns:: |p{8.5cm}|p{9.0cm}|
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - ``V4L2_EXPOSURE_METERING_AVERAGE``
+      - Use the light information coming from the entire frame and average
+	giving no weighting to any particular portion of the metered area.
+    * - ``V4L2_EXPOSURE_METERING_CENTER_WEIGHTED``
+      - Average the light information coming from the entire frame giving
+	priority to the center of the metered area.
+    * - ``V4L2_EXPOSURE_METERING_SPOT``
+      - Measure only very small area at the center of the frame.
+    * - ``V4L2_EXPOSURE_METERING_MATRIX``
+      - A multi-zone metering. The light intensity is measured in several
+	points of the frame and the results are combined. The algorithm of
+	the zones selection and their significance in calculating the
+	final value is device dependent.
+
+
+
+``V4L2_CID_PAN_RELATIVE (integer)``
+    This control turns the camera horizontally by the specified amount.
+    The unit is undefined. A positive value moves the camera to the
+    right (clockwise when viewed from above), a negative value to the
+    left. A value of zero does not cause motion. This is a write-only
+    control.
+
+``V4L2_CID_TILT_RELATIVE (integer)``
+    This control turns the camera vertically by the specified amount.
+    The unit is undefined. A positive value moves the camera up, a
+    negative value down. A value of zero does not cause motion. This is
+    a write-only control.
+
+``V4L2_CID_PAN_RESET (button)``
+    When this control is set, the camera moves horizontally to the
+    default position.
+
+``V4L2_CID_TILT_RESET (button)``
+    When this control is set, the camera moves vertically to the default
+    position.
+
+``V4L2_CID_PAN_ABSOLUTE (integer)``
+    This control turns the camera horizontally to the specified
+    position. Positive values move the camera to the right (clockwise
+    when viewed from above), negative values to the left. Drivers should
+    interpret the values as arc seconds, with valid values between -180
+    * 3600 and +180 * 3600 inclusive.
+
+``V4L2_CID_TILT_ABSOLUTE (integer)``
+    This control turns the camera vertically to the specified position.
+    Positive values move the camera up, negative values down. Drivers
+    should interpret the values as arc seconds, with valid values
+    between -180 * 3600 and +180 * 3600 inclusive.
+
+``V4L2_CID_FOCUS_ABSOLUTE (integer)``
+    This control sets the focal point of the camera to the specified
+    position. The unit is undefined. Positive values set the focus
+    closer to the camera, negative values towards infinity.
+
+``V4L2_CID_FOCUS_RELATIVE (integer)``
+    This control moves the focal point of the camera by the specified
+    amount. The unit is undefined. Positive values move the focus closer
+    to the camera, negative values towards infinity. This is a
+    write-only control.
+
+``V4L2_CID_FOCUS_AUTO (boolean)``
+    Enables continuous automatic focus adjustments. The effect of manual
+    focus adjustments while this feature is enabled is undefined,
+    drivers should ignore such requests.
+
+``V4L2_CID_AUTO_FOCUS_START (button)``
+    Starts single auto focus process. The effect of setting this control
+    when ``V4L2_CID_FOCUS_AUTO`` is set to ``TRUE`` (1) is undefined,
+    drivers should ignore such requests.
+
+``V4L2_CID_AUTO_FOCUS_STOP (button)``
+    Aborts automatic focusing started with ``V4L2_CID_AUTO_FOCUS_START``
+    control. It is effective only when the continuous autofocus is
+    disabled, that is when ``V4L2_CID_FOCUS_AUTO`` control is set to
+    ``FALSE`` (0).
+
+.. _v4l2-auto-focus-status:
+
+``V4L2_CID_AUTO_FOCUS_STATUS (bitmask)``
+    The automatic focus status. This is a read-only control.
+
+    Setting ``V4L2_LOCK_FOCUS`` lock bit of the ``V4L2_CID_3A_LOCK``
+    control may stop updates of the ``V4L2_CID_AUTO_FOCUS_STATUS``
+    control value.
+
+.. tabularcolumns:: |p{6.5cm}|p{11.0cm}|
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - ``V4L2_AUTO_FOCUS_STATUS_IDLE``
+      - Automatic focus is not active.
+    * - ``V4L2_AUTO_FOCUS_STATUS_BUSY``
+      - Automatic focusing is in progress.
+    * - ``V4L2_AUTO_FOCUS_STATUS_REACHED``
+      - Focus has been reached.
+    * - ``V4L2_AUTO_FOCUS_STATUS_FAILED``
+      - Automatic focus has failed, the driver will not transition from
+	this state until another action is performed by an application.
+
+
+
+.. _v4l2-auto-focus-range:
+
+``V4L2_CID_AUTO_FOCUS_RANGE``
+    (enum)
+
+enum v4l2_auto_focus_range -
+    Determines auto focus distance range for which lens may be adjusted.
+
+.. tabularcolumns:: |p{6.5cm}|p{11.0cm}|
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - ``V4L2_AUTO_FOCUS_RANGE_AUTO``
+      - The camera automatically selects the focus range.
+    * - ``V4L2_AUTO_FOCUS_RANGE_NORMAL``
+      - Normal distance range, limited for best automatic focus
+	performance.
+    * - ``V4L2_AUTO_FOCUS_RANGE_MACRO``
+      - Macro (close-up) auto focus. The camera will use its minimum
+	possible distance for auto focus.
+    * - ``V4L2_AUTO_FOCUS_RANGE_INFINITY``
+      - The lens is set to focus on an object at infinite distance.
+
+
+
+``V4L2_CID_ZOOM_ABSOLUTE (integer)``
+    Specify the objective lens focal length as an absolute value. The
+    zoom unit is driver-specific and its value should be a positive
+    integer.
+
+``V4L2_CID_ZOOM_RELATIVE (integer)``
+    Specify the objective lens focal length relatively to the current
+    value. Positive values move the zoom lens group towards the
+    telephoto direction, negative values towards the wide-angle
+    direction. The zoom unit is driver-specific. This is a write-only
+    control.
+
+``V4L2_CID_ZOOM_CONTINUOUS (integer)``
+    Move the objective lens group at the specified speed until it
+    reaches physical device limits or until an explicit request to stop
+    the movement. A positive value moves the zoom lens group towards the
+    telephoto direction. A value of zero stops the zoom lens group
+    movement. A negative value moves the zoom lens group towards the
+    wide-angle direction. The zoom speed unit is driver-specific.
+
+``V4L2_CID_IRIS_ABSOLUTE (integer)``
+    This control sets the camera's aperture to the specified value. The
+    unit is undefined. Larger values open the iris wider, smaller values
+    close it.
+
+``V4L2_CID_IRIS_RELATIVE (integer)``
+    This control modifies the camera's aperture by the specified amount.
+    The unit is undefined. Positive values open the iris one step
+    further, negative values close it one step further. This is a
+    write-only control.
+
+``V4L2_CID_PRIVACY (boolean)``
+    Prevent video from being acquired by the camera. When this control
+    is set to ``TRUE`` (1), no image can be captured by the camera.
+    Common means to enforce privacy are mechanical obturation of the
+    sensor and firmware image processing, but the device is not
+    restricted to these methods. Devices that implement the privacy
+    control must support read access and may support write access.
+
+``V4L2_CID_BAND_STOP_FILTER (integer)``
+    Switch the band-stop filter of a camera sensor on or off, or specify
+    its strength. Such band-stop filters can be used, for example, to
+    filter out the fluorescent light component.
+
+.. _v4l2-auto-n-preset-white-balance:
+
+``V4L2_CID_AUTO_N_PRESET_WHITE_BALANCE``
+    (enum)
+
+enum v4l2_auto_n_preset_white_balance -
+    Sets white balance to automatic, manual or a preset. The presets
+    determine color temperature of the light as a hint to the camera for
+    white balance adjustments resulting in most accurate color
+    representation. The following white balance presets are listed in
+    order of increasing color temperature.
+
+.. tabularcolumns:: |p{7.0 cm}|p{10.5cm}|
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - ``V4L2_WHITE_BALANCE_MANUAL``
+      - Manual white balance.
+    * - ``V4L2_WHITE_BALANCE_AUTO``
+      - Automatic white balance adjustments.
+    * - ``V4L2_WHITE_BALANCE_INCANDESCENT``
+      - White balance setting for incandescent (tungsten) lighting. It
+	generally cools down the colors and corresponds approximately to
+	2500...3500 K color temperature range.
+    * - ``V4L2_WHITE_BALANCE_FLUORESCENT``
+      - White balance preset for fluorescent lighting. It corresponds
+	approximately to 4000...5000 K color temperature.
+    * - ``V4L2_WHITE_BALANCE_FLUORESCENT_H``
+      - With this setting the camera will compensate for fluorescent H
+	lighting.
+    * - ``V4L2_WHITE_BALANCE_HORIZON``
+      - White balance setting for horizon daylight. It corresponds
+	approximately to 5000 K color temperature.
+    * - ``V4L2_WHITE_BALANCE_DAYLIGHT``
+      - White balance preset for daylight (with clear sky). It corresponds
+	approximately to 5000...6500 K color temperature.
+    * - ``V4L2_WHITE_BALANCE_FLASH``
+      - With this setting the camera will compensate for the flash light.
+	It slightly warms up the colors and corresponds roughly to
+	5000...5500 K color temperature.
+    * - ``V4L2_WHITE_BALANCE_CLOUDY``
+      - White balance preset for moderately overcast sky. This option
+	corresponds approximately to 6500...8000 K color temperature
+	range.
+    * - ``V4L2_WHITE_BALANCE_SHADE``
+      - White balance preset for shade or heavily overcast sky. It
+	corresponds approximately to 9000...10000 K color temperature.
+
+
+
+.. _v4l2-wide-dynamic-range:
+
+``V4L2_CID_WIDE_DYNAMIC_RANGE (boolean)``
+    Enables or disables the camera's wide dynamic range feature. This
+    feature allows to obtain clear images in situations where intensity
+    of the illumination varies significantly throughout the scene, i.e.
+    there are simultaneously very dark and very bright areas. It is most
+    commonly realized in cameras by combining two subsequent frames with
+    different exposure times.  [#f1]_
+
+.. _v4l2-image-stabilization:
+
+``V4L2_CID_IMAGE_STABILIZATION (boolean)``
+    Enables or disables image stabilization.
+
+``V4L2_CID_ISO_SENSITIVITY (integer menu)``
+    Determines ISO equivalent of an image sensor indicating the sensor's
+    sensitivity to light. The numbers are expressed in arithmetic scale,
+    as per :ref:`iso12232` standard, where doubling the sensor
+    sensitivity is represented by doubling the numerical ISO value.
+    Applications should interpret the values as standard ISO values
+    multiplied by 1000, e.g. control value 800 stands for ISO 0.8.
+    Drivers will usually support only a subset of standard ISO values.
+    The effect of setting this control while the
+    ``V4L2_CID_ISO_SENSITIVITY_AUTO`` control is set to a value other
+    than ``V4L2_CID_ISO_SENSITIVITY_MANUAL`` is undefined, drivers
+    should ignore such requests.
+
+.. _v4l2-iso-sensitivity-auto-type:
+
+``V4L2_CID_ISO_SENSITIVITY_AUTO``
+    (enum)
+
+enum v4l2_iso_sensitivity_type -
+    Enables or disables automatic ISO sensitivity adjustments.
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - ``V4L2_CID_ISO_SENSITIVITY_MANUAL``
+      - Manual ISO sensitivity.
+    * - ``V4L2_CID_ISO_SENSITIVITY_AUTO``
+      - Automatic ISO sensitivity adjustments.
+
+
+
+.. _v4l2-scene-mode:
+
+``V4L2_CID_SCENE_MODE``
+    (enum)
+
+enum v4l2_scene_mode -
+    This control allows to select scene programs as the camera automatic
+    modes optimized for common shooting scenes. Within these modes the
+    camera determines best exposure, aperture, focusing, light metering,
+    white balance and equivalent sensitivity. The controls of those
+    parameters are influenced by the scene mode control. An exact
+    behavior in each mode is subject to the camera specification.
+
+    When the scene mode feature is not used, this control should be set
+    to ``V4L2_SCENE_MODE_NONE`` to make sure the other possibly related
+    controls are accessible. The following scene programs are defined:
+
+.. tabularcolumns:: |p{6.0cm}|p{11.5cm}|
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - ``V4L2_SCENE_MODE_NONE``
+      - The scene mode feature is disabled.
+    * - ``V4L2_SCENE_MODE_BACKLIGHT``
+      - Backlight. Compensates for dark shadows when light is coming from
+	behind a subject, also by automatically turning on the flash.
+    * - ``V4L2_SCENE_MODE_BEACH_SNOW``
+      - Beach and snow. This mode compensates for all-white or bright
+	scenes, which tend to look gray and low contrast, when camera's
+	automatic exposure is based on an average scene brightness. To
+	compensate, this mode automatically slightly overexposes the
+	frames. The white balance may also be adjusted to compensate for
+	the fact that reflected snow looks bluish rather than white.
+    * - ``V4L2_SCENE_MODE_CANDLELIGHT``
+      - Candle light. The camera generally raises the ISO sensitivity and
+	lowers the shutter speed. This mode compensates for relatively
+	close subject in the scene. The flash is disabled in order to
+	preserve the ambiance of the light.
+    * - ``V4L2_SCENE_MODE_DAWN_DUSK``
+      - Dawn and dusk. Preserves the colors seen in low natural light
+	before dusk and after down. The camera may turn off the flash, and
+	automatically focus at infinity. It will usually boost saturation
+	and lower the shutter speed.
+    * - ``V4L2_SCENE_MODE_FALL_COLORS``
+      - Fall colors. Increases saturation and adjusts white balance for
+	color enhancement. Pictures of autumn leaves get saturated reds
+	and yellows.
+    * - ``V4L2_SCENE_MODE_FIREWORKS``
+      - Fireworks. Long exposure times are used to capture the expanding
+	burst of light from a firework. The camera may invoke image
+	stabilization.
+    * - ``V4L2_SCENE_MODE_LANDSCAPE``
+      - Landscape. The camera may choose a small aperture to provide deep
+	depth of field and long exposure duration to help capture detail
+	in dim light conditions. The focus is fixed at infinity. Suitable
+	for distant and wide scenery.
+    * - ``V4L2_SCENE_MODE_NIGHT``
+      - Night, also known as Night Landscape. Designed for low light
+	conditions, it preserves detail in the dark areas without blowing
+	out bright objects. The camera generally sets itself to a
+	medium-to-high ISO sensitivity, with a relatively long exposure
+	time, and turns flash off. As such, there will be increased image
+	noise and the possibility of blurred image.
+    * - ``V4L2_SCENE_MODE_PARTY_INDOOR``
+      - Party and indoor. Designed to capture indoor scenes that are lit
+	by indoor background lighting as well as the flash. The camera
+	usually increases ISO sensitivity, and adjusts exposure for the
+	low light conditions.
+    * - ``V4L2_SCENE_MODE_PORTRAIT``
+      - Portrait. The camera adjusts the aperture so that the depth of
+	field is reduced, which helps to isolate the subject against a
+	smooth background. Most cameras recognize the presence of faces in
+	the scene and focus on them. The color hue is adjusted to enhance
+	skin tones. The intensity of the flash is often reduced.
+    * - ``V4L2_SCENE_MODE_SPORTS``
+      - Sports. Significantly increases ISO and uses a fast shutter speed
+	to freeze motion of rapidly-moving subjects. Increased image noise
+	may be seen in this mode.
+    * - ``V4L2_SCENE_MODE_SUNSET``
+      - Sunset. Preserves deep hues seen in sunsets and sunrises. It bumps
+	up the saturation.
+    * - ``V4L2_SCENE_MODE_TEXT``
+      - Text. It applies extra contrast and sharpness, it is typically a
+	black-and-white mode optimized for readability. Automatic focus
+	may be switched to close-up mode and this setting may also involve
+	some lens-distortion correction.
+
+
+
+``V4L2_CID_3A_LOCK (bitmask)``
+    This control locks or unlocks the automatic focus, exposure and
+    white balance. The automatic adjustments can be paused independently
+    by setting the corresponding lock bit to 1. The camera then retains
+    the settings until the lock bit is cleared. The following lock bits
+    are defined:
+
+    When a given algorithm is not enabled, drivers should ignore
+    requests to lock it and should return no error. An example might be
+    an application setting bit ``V4L2_LOCK_WHITE_BALANCE`` when the
+    ``V4L2_CID_AUTO_WHITE_BALANCE`` control is set to ``FALSE``. The
+    value of this control may be changed by exposure, white balance or
+    focus controls.
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - ``V4L2_LOCK_EXPOSURE``
+      - Automatic exposure adjustments lock.
+    * - ``V4L2_LOCK_WHITE_BALANCE``
+      - Automatic white balance adjustments lock.
+    * - ``V4L2_LOCK_FOCUS``
+      - Automatic focus lock.
+
+
+
+``V4L2_CID_PAN_SPEED (integer)``
+    This control turns the camera horizontally at the specific speed.
+    The unit is undefined. A positive value moves the camera to the
+    right (clockwise when viewed from above), a negative value to the
+    left. A value of zero stops the motion if one is in progress and has
+    no effect otherwise.
+
+``V4L2_CID_TILT_SPEED (integer)``
+    This control turns the camera vertically at the specified speed. The
+    unit is undefined. A positive value moves the camera up, a negative
+    value down. A value of zero stops the motion if one is in progress
+    and has no effect otherwise.
+
+
+.. _fm-tx-controls:
+
+FM Transmitter Control Reference
+================================
+
+The FM Transmitter (FM_TX) class includes controls for common features
+of FM transmissions capable devices. Currently this class includes
+parameters for audio compression, pilot tone generation, audio deviation
+limiter, RDS transmission and tuning power features.
+
+
+.. _fm-tx-control-id:
+
+FM_TX Control IDs
+-----------------
+
+``V4L2_CID_FM_TX_CLASS (class)``
+    The FM_TX class descriptor. Calling
+    :ref:`VIDIOC_QUERYCTRL` for this control will
+    return a description of this control class.
+
+``V4L2_CID_RDS_TX_DEVIATION (integer)``
+    Configures RDS signal frequency deviation level in Hz. The range and
+    step are driver-specific.
+
+``V4L2_CID_RDS_TX_PI (integer)``
+    Sets the RDS Programme Identification field for transmission.
+
+``V4L2_CID_RDS_TX_PTY (integer)``
+    Sets the RDS Programme Type field for transmission. This encodes up
+    to 31 pre-defined programme types.
+
+``V4L2_CID_RDS_TX_PS_NAME (string)``
+    Sets the Programme Service name (PS_NAME) for transmission. It is
+    intended for static display on a receiver. It is the primary aid to
+    listeners in programme service identification and selection. In
+    Annex E of :ref:`iec62106`, the RDS specification, there is a full
+    description of the correct character encoding for Programme Service
+    name strings. Also from RDS specification, PS is usually a single
+    eight character text. However, it is also possible to find receivers
+    which can scroll strings sized as 8 x N characters. So, this control
+    must be configured with steps of 8 characters. The result is it must
+    always contain a string with size multiple of 8.
+
+``V4L2_CID_RDS_TX_RADIO_TEXT (string)``
+    Sets the Radio Text info for transmission. It is a textual
+    description of what is being broadcasted. RDS Radio Text can be
+    applied when broadcaster wishes to transmit longer PS names,
+    programme-related information or any other text. In these cases,
+    RadioText should be used in addition to ``V4L2_CID_RDS_TX_PS_NAME``.
+    The encoding for Radio Text strings is also fully described in Annex
+    E of :ref:`iec62106`. The length of Radio Text strings depends on
+    which RDS Block is being used to transmit it, either 32 (2A block)
+    or 64 (2B block). However, it is also possible to find receivers
+    which can scroll strings sized as 32 x N or 64 x N characters. So,
+    this control must be configured with steps of 32 or 64 characters.
+    The result is it must always contain a string with size multiple of
+    32 or 64.
+
+``V4L2_CID_RDS_TX_MONO_STEREO (boolean)``
+    Sets the Mono/Stereo bit of the Decoder Identification code. If set,
+    then the audio was recorded as stereo.
+
+``V4L2_CID_RDS_TX_ARTIFICIAL_HEAD (boolean)``
+    Sets the
+    `Artificial Head <http://en.wikipedia.org/wiki/Artificial_head>`__
+    bit of the Decoder Identification code. If set, then the audio was
+    recorded using an artificial head.
+
+``V4L2_CID_RDS_TX_COMPRESSED (boolean)``
+    Sets the Compressed bit of the Decoder Identification code. If set,
+    then the audio is compressed.
+
+``V4L2_CID_RDS_TX_DYNAMIC_PTY (boolean)``
+    Sets the Dynamic PTY bit of the Decoder Identification code. If set,
+    then the PTY code is dynamically switched.
+
+``V4L2_CID_RDS_TX_TRAFFIC_ANNOUNCEMENT (boolean)``
+    If set, then a traffic announcement is in progress.
+
+``V4L2_CID_RDS_TX_TRAFFIC_PROGRAM (boolean)``
+    If set, then the tuned programme carries traffic announcements.
+
+``V4L2_CID_RDS_TX_MUSIC_SPEECH (boolean)``
+    If set, then this channel broadcasts music. If cleared, then it
+    broadcasts speech. If the transmitter doesn't make this distinction,
+    then it should be set.
+
+``V4L2_CID_RDS_TX_ALT_FREQS_ENABLE (boolean)``
+    If set, then transmit alternate frequencies.
+
+``V4L2_CID_RDS_TX_ALT_FREQS (__u32 array)``
+    The alternate frequencies in kHz units. The RDS standard allows for
+    up to 25 frequencies to be defined. Drivers may support fewer
+    frequencies so check the array size.
+
+``V4L2_CID_AUDIO_LIMITER_ENABLED (boolean)``
+    Enables or disables the audio deviation limiter feature. The limiter
+    is useful when trying to maximize the audio volume, minimize
+    receiver-generated distortion and prevent overmodulation.
+
+``V4L2_CID_AUDIO_LIMITER_RELEASE_TIME (integer)``
+    Sets the audio deviation limiter feature release time. Unit is in
+    useconds. Step and range are driver-specific.
+
+``V4L2_CID_AUDIO_LIMITER_DEVIATION (integer)``
+    Configures audio frequency deviation level in Hz. The range and step
+    are driver-specific.
+
+``V4L2_CID_AUDIO_COMPRESSION_ENABLED (boolean)``
+    Enables or disables the audio compression feature. This feature
+    amplifies signals below the threshold by a fixed gain and compresses
+    audio signals above the threshold by the ratio of Threshold/(Gain +
+    Threshold).
+
+``V4L2_CID_AUDIO_COMPRESSION_GAIN (integer)``
+    Sets the gain for audio compression feature. It is a dB value. The
+    range and step are driver-specific.
+
+``V4L2_CID_AUDIO_COMPRESSION_THRESHOLD (integer)``
+    Sets the threshold level for audio compression freature. It is a dB
+    value. The range and step are driver-specific.
+
+``V4L2_CID_AUDIO_COMPRESSION_ATTACK_TIME (integer)``
+    Sets the attack time for audio compression feature. It is a useconds
+    value. The range and step are driver-specific.
+
+``V4L2_CID_AUDIO_COMPRESSION_RELEASE_TIME (integer)``
+    Sets the release time for audio compression feature. It is a
+    useconds value. The range and step are driver-specific.
+
+``V4L2_CID_PILOT_TONE_ENABLED (boolean)``
+    Enables or disables the pilot tone generation feature.
+
+``V4L2_CID_PILOT_TONE_DEVIATION (integer)``
+    Configures pilot tone frequency deviation level. Unit is in Hz. The
+    range and step are driver-specific.
+
+``V4L2_CID_PILOT_TONE_FREQUENCY (integer)``
+    Configures pilot tone frequency value. Unit is in Hz. The range and
+    step are driver-specific.
+
+``V4L2_CID_TUNE_PREEMPHASIS``
+    (enum)
+
+enum v4l2_preemphasis -
+    Configures the pre-emphasis value for broadcasting. A pre-emphasis
+    filter is applied to the broadcast to accentuate the high audio
+    frequencies. Depending on the region, a time constant of either 50
+    or 75 useconds is used. The enum v4l2_preemphasis defines possible
+    values for pre-emphasis. Here they are:
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - ``V4L2_PREEMPHASIS_DISABLED``
+      - No pre-emphasis is applied.
+    * - ``V4L2_PREEMPHASIS_50_uS``
+      - A pre-emphasis of 50 uS is used.
+    * - ``V4L2_PREEMPHASIS_75_uS``
+      - A pre-emphasis of 75 uS is used.
+
+
+
+``V4L2_CID_TUNE_POWER_LEVEL (integer)``
+    Sets the output power level for signal transmission. Unit is in
+    dBuV. Range and step are driver-specific.
+
+``V4L2_CID_TUNE_ANTENNA_CAPACITOR (integer)``
+    This selects the value of antenna tuning capacitor manually or
+    automatically if set to zero. Unit, range and step are
+    driver-specific.
+
+For more details about RDS specification, refer to :ref:`iec62106`
+document, from CENELEC.
+
+
+.. _flash-controls:
+
+Flash Control Reference
+=======================
+
+The V4L2 flash controls are intended to provide generic access to flash
+controller devices. Flash controller devices are typically used in
+digital cameras.
+
+The interface can support both LED and xenon flash devices. As of
+writing this, there is no xenon flash driver using this interface.
+
+
+.. _flash-controls-use-cases:
+
+Supported use cases
+-------------------
+
+
+Unsynchronised LED flash (software strobe)
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+Unsynchronised LED flash is controlled directly by the host as the
+sensor. The flash must be enabled by the host before the exposure of the
+image starts and disabled once it ends. The host is fully responsible
+for the timing of the flash.
+
+Example of such device: Nokia N900.
+
+
+Synchronised LED flash (hardware strobe)
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+The synchronised LED flash is pre-programmed by the host (power and
+timeout) but controlled by the sensor through a strobe signal from the
+sensor to the flash.
+
+The sensor controls the flash duration and timing. This information
+typically must be made available to the sensor.
+
+
+LED flash as torch
+^^^^^^^^^^^^^^^^^^
+
+LED flash may be used as torch in conjunction with another use case
+involving camera or individually.
+
+
+.. _flash-control-id:
+
+Flash Control IDs
+"""""""""""""""""
+
+``V4L2_CID_FLASH_CLASS (class)``
+    The FLASH class descriptor.
+
+``V4L2_CID_FLASH_LED_MODE (menu)``
+    Defines the mode of the flash LED, the high-power white LED attached
+    to the flash controller. Setting this control may not be possible in
+    presence of some faults. See V4L2_CID_FLASH_FAULT.
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - ``V4L2_FLASH_LED_MODE_NONE``
+      - Off.
+    * - ``V4L2_FLASH_LED_MODE_FLASH``
+      - Flash mode.
+    * - ``V4L2_FLASH_LED_MODE_TORCH``
+      - Torch mode. See V4L2_CID_FLASH_TORCH_INTENSITY.
+
+
+
+``V4L2_CID_FLASH_STROBE_SOURCE (menu)``
+    Defines the source of the flash LED strobe.
+
+.. tabularcolumns:: |p{7.0cm}|p{10.5cm}|
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - ``V4L2_FLASH_STROBE_SOURCE_SOFTWARE``
+      - The flash strobe is triggered by using the
+	V4L2_CID_FLASH_STROBE control.
+    * - ``V4L2_FLASH_STROBE_SOURCE_EXTERNAL``
+      - The flash strobe is triggered by an external source. Typically
+	this is a sensor, which makes it possible to synchronises the
+	flash strobe start to exposure start.
+
+
+
+``V4L2_CID_FLASH_STROBE (button)``
+    Strobe flash. Valid when V4L2_CID_FLASH_LED_MODE is set to
+    V4L2_FLASH_LED_MODE_FLASH and V4L2_CID_FLASH_STROBE_SOURCE
+    is set to V4L2_FLASH_STROBE_SOURCE_SOFTWARE. Setting this
+    control may not be possible in presence of some faults. See
+    V4L2_CID_FLASH_FAULT.
+
+``V4L2_CID_FLASH_STROBE_STOP (button)``
+    Stop flash strobe immediately.
+
+``V4L2_CID_FLASH_STROBE_STATUS (boolean)``
+    Strobe status: whether the flash is strobing at the moment or not.
+    This is a read-only control.
+
+``V4L2_CID_FLASH_TIMEOUT (integer)``
+    Hardware timeout for flash. The flash strobe is stopped after this
+    period of time has passed from the start of the strobe.
+
+``V4L2_CID_FLASH_INTENSITY (integer)``
+    Intensity of the flash strobe when the flash LED is in flash mode
+    (V4L2_FLASH_LED_MODE_FLASH). The unit should be milliamps (mA)
+    if possible.
+
+``V4L2_CID_FLASH_TORCH_INTENSITY (integer)``
+    Intensity of the flash LED in torch mode
+    (V4L2_FLASH_LED_MODE_TORCH). The unit should be milliamps (mA)
+    if possible. Setting this control may not be possible in presence of
+    some faults. See V4L2_CID_FLASH_FAULT.
+
+``V4L2_CID_FLASH_INDICATOR_INTENSITY (integer)``
+    Intensity of the indicator LED. The indicator LED may be fully
+    independent of the flash LED. The unit should be microamps (uA) if
+    possible.
+
+``V4L2_CID_FLASH_FAULT (bitmask)``
+    Faults related to the flash. The faults tell about specific problems
+    in the flash chip itself or the LEDs attached to it. Faults may
+    prevent further use of some of the flash controls. In particular,
+    V4L2_CID_FLASH_LED_MODE is set to V4L2_FLASH_LED_MODE_NONE
+    if the fault affects the flash LED. Exactly which faults have such
+    an effect is chip dependent. Reading the faults resets the control
+    and returns the chip to a usable state if possible.
+
+.. tabularcolumns:: |p{8.0cm}|p{9.5cm}|
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - ``V4L2_FLASH_FAULT_OVER_VOLTAGE``
+      - Flash controller voltage to the flash LED has exceeded the limit
+	specific to the flash controller.
+    * - ``V4L2_FLASH_FAULT_TIMEOUT``
+      - The flash strobe was still on when the timeout set by the user ---
+	V4L2_CID_FLASH_TIMEOUT control --- has expired. Not all flash
+	controllers may set this in all such conditions.
+    * - ``V4L2_FLASH_FAULT_OVER_TEMPERATURE``
+      - The flash controller has overheated.
+    * - ``V4L2_FLASH_FAULT_SHORT_CIRCUIT``
+      - The short circuit protection of the flash controller has been
+	triggered.
+    * - ``V4L2_FLASH_FAULT_OVER_CURRENT``
+      - Current in the LED power supply has exceeded the limit specific to
+	the flash controller.
+    * - ``V4L2_FLASH_FAULT_INDICATOR``
+      - The flash controller has detected a short or open circuit
+	condition on the indicator LED.
+    * - ``V4L2_FLASH_FAULT_UNDER_VOLTAGE``
+      - Flash controller voltage to the flash LED has been below the
+	minimum limit specific to the flash controller.
+    * - ``V4L2_FLASH_FAULT_INPUT_VOLTAGE``
+      - The input voltage of the flash controller is below the limit under
+	which strobing the flash at full current will not be possible.The
+	condition persists until this flag is no longer set.
+    * - ``V4L2_FLASH_FAULT_LED_OVER_TEMPERATURE``
+      - The temperature of the LED has exceeded its allowed upper limit.
+
+
+
+``V4L2_CID_FLASH_CHARGE (boolean)``
+    Enable or disable charging of the xenon flash capacitor.
+
+``V4L2_CID_FLASH_READY (boolean)``
+    Is the flash ready to strobe? Xenon flashes require their capacitors
+    charged before strobing. LED flashes often require a cooldown period
+    after strobe during which another strobe will not be possible. This
+    is a read-only control.
+
+
+.. _jpeg-controls:
+
+JPEG Control Reference
+======================
+
+The JPEG class includes controls for common features of JPEG encoders
+and decoders. Currently it includes features for codecs implementing
+progressive baseline DCT compression process with Huffman entrophy
+coding.
+
+
+.. _jpeg-control-id:
+
+JPEG Control IDs
+----------------
+
+``V4L2_CID_JPEG_CLASS (class)``
+    The JPEG class descriptor. Calling
+    :ref:`VIDIOC_QUERYCTRL` for this control will
+    return a description of this control class.
+
+``V4L2_CID_JPEG_CHROMA_SUBSAMPLING (menu)``
+    The chroma subsampling factors describe how each component of an
+    input image is sampled, in respect to maximum sample rate in each
+    spatial dimension. See :ref:`itu-t81`, clause A.1.1. for more
+    details. The ``V4L2_CID_JPEG_CHROMA_SUBSAMPLING`` control determines
+    how Cb and Cr components are downsampled after converting an input
+    image from RGB to Y'CbCr color space.
+
+.. tabularcolumns:: |p{7.0cm}|p{10.5cm}|
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - ``V4L2_JPEG_CHROMA_SUBSAMPLING_444``
+      - No chroma subsampling, each pixel has Y, Cr and Cb values.
+    * - ``V4L2_JPEG_CHROMA_SUBSAMPLING_422``
+      - Horizontally subsample Cr, Cb components by a factor of 2.
+    * - ``V4L2_JPEG_CHROMA_SUBSAMPLING_420``
+      - Subsample Cr, Cb components horizontally and vertically by 2.
+    * - ``V4L2_JPEG_CHROMA_SUBSAMPLING_411``
+      - Horizontally subsample Cr, Cb components by a factor of 4.
+    * - ``V4L2_JPEG_CHROMA_SUBSAMPLING_410``
+      - Subsample Cr, Cb components horizontally by 4 and vertically by 2.
+    * - ``V4L2_JPEG_CHROMA_SUBSAMPLING_GRAY``
+      - Use only luminance component.
+
+
+
+``V4L2_CID_JPEG_RESTART_INTERVAL (integer)``
+    The restart interval determines an interval of inserting RSTm
+    markers (m = 0..7). The purpose of these markers is to additionally
+    reinitialize the encoder process, in order to process blocks of an
+    image independently. For the lossy compression processes the restart
+    interval unit is MCU (Minimum Coded Unit) and its value is contained
+    in DRI (Define Restart Interval) marker. If
+    ``V4L2_CID_JPEG_RESTART_INTERVAL`` control is set to 0, DRI and RSTm
+    markers will not be inserted.
+
+.. _jpeg-quality-control:
+
+``V4L2_CID_JPEG_COMPRESSION_QUALITY (integer)``
+    ``V4L2_CID_JPEG_COMPRESSION_QUALITY`` control determines trade-off
+    between image quality and size. It provides simpler method for
+    applications to control image quality, without a need for direct
+    reconfiguration of luminance and chrominance quantization tables. In
+    cases where a driver uses quantization tables configured directly by
+    an application, using interfaces defined elsewhere,
+    ``V4L2_CID_JPEG_COMPRESSION_QUALITY`` control should be set by
+    driver to 0.
+
+    The value range of this control is driver-specific. Only positive,
+    non-zero values are meaningful. The recommended range is 1 - 100,
+    where larger values correspond to better image quality.
+
+.. _jpeg-active-marker-control:
+
+``V4L2_CID_JPEG_ACTIVE_MARKER (bitmask)``
+    Specify which JPEG markers are included in compressed stream. This
+    control is valid only for encoders.
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - ``V4L2_JPEG_ACTIVE_MARKER_APP0``
+      - Application data segment APP\ :sub:`0`.
+    * - ``V4L2_JPEG_ACTIVE_MARKER_APP1``
+      - Application data segment APP\ :sub:`1`.
+    * - ``V4L2_JPEG_ACTIVE_MARKER_COM``
+      - Comment segment.
+    * - ``V4L2_JPEG_ACTIVE_MARKER_DQT``
+      - Quantization tables segment.
+    * - ``V4L2_JPEG_ACTIVE_MARKER_DHT``
+      - Huffman tables segment.
+
+
+
+For more details about JPEG specification, refer to :ref:`itu-t81`,
+:ref:`jfif`, :ref:`w3c-jpeg-jfif`.
+
+
+.. _image-source-controls:
+
+Image Source Control Reference
+==============================
+
+The Image Source control class is intended for low-level control of
+image source devices such as image sensors. The devices feature an
+analogue to digital converter and a bus transmitter to transmit the
+image data out of the device.
+
+
+.. _image-source-control-id:
+
+Image Source Control IDs
+------------------------
+
+``V4L2_CID_IMAGE_SOURCE_CLASS (class)``
+    The IMAGE_SOURCE class descriptor.
+
+``V4L2_CID_VBLANK (integer)``
+    Vertical blanking. The idle period after every frame during which no
+    image data is produced. The unit of vertical blanking is a line.
+    Every line has length of the image width plus horizontal blanking at
+    the pixel rate defined by ``V4L2_CID_PIXEL_RATE`` control in the
+    same sub-device.
+
+``V4L2_CID_HBLANK (integer)``
+    Horizontal blanking. The idle period after every line of image data
+    during which no image data is produced. The unit of horizontal
+    blanking is pixels.
+
+``V4L2_CID_ANALOGUE_GAIN (integer)``
+    Analogue gain is gain affecting all colour components in the pixel
+    matrix. The gain operation is performed in the analogue domain
+    before A/D conversion.
+
+``V4L2_CID_TEST_PATTERN_RED (integer)``
+    Test pattern red colour component.
+
+``V4L2_CID_TEST_PATTERN_GREENR (integer)``
+    Test pattern green (next to red) colour component.
+
+``V4L2_CID_TEST_PATTERN_BLUE (integer)``
+    Test pattern blue colour component.
+
+``V4L2_CID_TEST_PATTERN_GREENB (integer)``
+    Test pattern green (next to blue) colour component.
+
+
+.. _image-process-controls:
+
+Image Process Control Reference
+===============================
+
+The Image Process control class is intended for low-level control of
+image processing functions. Unlike ``V4L2_CID_IMAGE_SOURCE_CLASS``, the
+controls in this class affect processing the image, and do not control
+capturing of it.
+
+
+.. _image-process-control-id:
+
+Image Process Control IDs
+-------------------------
+
+``V4L2_CID_IMAGE_PROC_CLASS (class)``
+    The IMAGE_PROC class descriptor.
+
+``V4L2_CID_LINK_FREQ (integer menu)``
+    Data bus frequency. Together with the media bus pixel code, bus type
+    (clock cycles per sample), the data bus frequency defines the pixel
+    rate (``V4L2_CID_PIXEL_RATE``) in the pixel array (or possibly
+    elsewhere, if the device is not an image sensor). The frame rate can
+    be calculated from the pixel clock, image width and height and
+    horizontal and vertical blanking. While the pixel rate control may
+    be defined elsewhere than in the subdev containing the pixel array,
+    the frame rate cannot be obtained from that information. This is
+    because only on the pixel array it can be assumed that the vertical
+    and horizontal blanking information is exact: no other blanking is
+    allowed in the pixel array. The selection of frame rate is performed
+    by selecting the desired horizontal and vertical blanking. The unit
+    of this control is Hz.
+
+``V4L2_CID_PIXEL_RATE (64-bit integer)``
+    Pixel rate in the source pads of the subdev. This control is
+    read-only and its unit is pixels / second.
+
+``V4L2_CID_TEST_PATTERN (menu)``
+    Some capture/display/sensor devices have the capability to generate
+    test pattern images. These hardware specific test patterns can be
+    used to test if a device is working properly.
+
+``V4L2_CID_DEINTERLACING_MODE (menu)``
+    The video deinterlacing mode (such as Bob, Weave, ...). The menu items are
+    driver specific and are documented in :ref:`v4l-drivers`.
+
+``V4L2_CID_DIGITAL_GAIN (integer)``
+    Digital gain is the value by which all colour components
+    are multiplied by. Typically the digital gain applied is the
+    control value divided by e.g. 0x100, meaning that to get no
+    digital gain the control value needs to be 0x100. The no-gain
+    configuration is also typically the default.
+
+
+.. _dv-controls:
+
+Digital Video Control Reference
+===============================
+
+The Digital Video control class is intended to control receivers and
+transmitters for `VGA <http://en.wikipedia.org/wiki/Vga>`__,
+`DVI <http://en.wikipedia.org/wiki/Digital_Visual_Interface>`__
+(Digital Visual Interface), HDMI (:ref:`hdmi`) and DisplayPort
+(:ref:`dp`). These controls are generally expected to be private to
+the receiver or transmitter subdevice that implements them, so they are
+only exposed on the ``/dev/v4l-subdev*`` device node.
+
+.. note::
+
+   Note that these devices can have multiple input or output pads which are
+   hooked up to e.g. HDMI connectors. Even though the subdevice will
+   receive or transmit video from/to only one of those pads, the other pads
+   can still be active when it comes to EDID (Extended Display
+   Identification Data, :ref:`vesaedid`) and HDCP (High-bandwidth Digital
+   Content Protection System, :ref:`hdcp`) processing, allowing the
+   device to do the fairly slow EDID/HDCP handling in advance. This allows
+   for quick switching between connectors.
+
+These pads appear in several of the controls in this section as
+bitmasks, one bit for each pad. Bit 0 corresponds to pad 0, bit 1 to pad
+1, etc. The maximum value of the control is the set of valid pads.
+
+
+.. _dv-control-id:
+
+Digital Video Control IDs
+-------------------------
+
+``V4L2_CID_DV_CLASS (class)``
+    The Digital Video class descriptor.
+
+``V4L2_CID_DV_TX_HOTPLUG (bitmask)``
+    Many connectors have a hotplug pin which is high if EDID information
+    is available from the source. This control shows the state of the
+    hotplug pin as seen by the transmitter. Each bit corresponds to an
+    output pad on the transmitter. If an output pad does not have an
+    associated hotplug pin, then the bit for that pad will be 0. This
+    read-only control is applicable to DVI-D, HDMI and DisplayPort
+    connectors.
+
+``V4L2_CID_DV_TX_RXSENSE (bitmask)``
+    Rx Sense is the detection of pull-ups on the TMDS clock lines. This
+    normally means that the sink has left/entered standby (i.e. the
+    transmitter can sense that the receiver is ready to receive video).
+    Each bit corresponds to an output pad on the transmitter. If an
+    output pad does not have an associated Rx Sense, then the bit for
+    that pad will be 0. This read-only control is applicable to DVI-D
+    and HDMI devices.
+
+``V4L2_CID_DV_TX_EDID_PRESENT (bitmask)``
+    When the transmitter sees the hotplug signal from the receiver it
+    will attempt to read the EDID. If set, then the transmitter has read
+    at least the first block (= 128 bytes). Each bit corresponds to an
+    output pad on the transmitter. If an output pad does not support
+    EDIDs, then the bit for that pad will be 0. This read-only control
+    is applicable to VGA, DVI-A/D, HDMI and DisplayPort connectors.
+
+``V4L2_CID_DV_TX_MODE``
+    (enum)
+
+enum v4l2_dv_tx_mode -
+    HDMI transmitters can transmit in DVI-D mode (just video) or in HDMI
+    mode (video + audio + auxiliary data). This control selects which
+    mode to use: V4L2_DV_TX_MODE_DVI_D or V4L2_DV_TX_MODE_HDMI.
+    This control is applicable to HDMI connectors.
+
+``V4L2_CID_DV_TX_RGB_RANGE``
+    (enum)
+
+enum v4l2_dv_rgb_range -
+    Select the quantization range for RGB output. V4L2_DV_RANGE_AUTO
+    follows the RGB quantization range specified in the standard for the
+    video interface (ie. :ref:`cea861` for HDMI).
+    V4L2_DV_RANGE_LIMITED and V4L2_DV_RANGE_FULL override the
+    standard to be compatible with sinks that have not implemented the
+    standard correctly (unfortunately quite common for HDMI and DVI-D).
+    Full range allows all possible values to be used whereas limited
+    range sets the range to (16 << (N-8)) - (235 << (N-8)) where N is
+    the number of bits per component. This control is applicable to VGA,
+    DVI-A/D, HDMI and DisplayPort connectors.
+
+``V4L2_CID_DV_TX_IT_CONTENT_TYPE``
+    (enum)
+
+enum v4l2_dv_it_content_type -
+    Configures the IT Content Type of the transmitted video. This
+    information is sent over HDMI and DisplayPort connectors as part of
+    the AVI InfoFrame. The term 'IT Content' is used for content that
+    originates from a computer as opposed to content from a TV broadcast
+    or an analog source. The enum v4l2_dv_it_content_type defines
+    the possible content types:
+
+.. tabularcolumns:: |p{7.0cm}|p{10.5cm}|
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - ``V4L2_DV_IT_CONTENT_TYPE_GRAPHICS``
+      - Graphics content. Pixel data should be passed unfiltered and
+	without analog reconstruction.
+    * - ``V4L2_DV_IT_CONTENT_TYPE_PHOTO``
+      - Photo content. The content is derived from digital still pictures.
+	The content should be passed through with minimal scaling and
+	picture enhancements.
+    * - ``V4L2_DV_IT_CONTENT_TYPE_CINEMA``
+      - Cinema content.
+    * - ``V4L2_DV_IT_CONTENT_TYPE_GAME``
+      - Game content. Audio and video latency should be minimized.
+    * - ``V4L2_DV_IT_CONTENT_TYPE_NO_ITC``
+      - No IT Content information is available and the ITC bit in the AVI
+	InfoFrame is set to 0.
+
+
+
+``V4L2_CID_DV_RX_POWER_PRESENT (bitmask)``
+    Detects whether the receiver receives power from the source (e.g.
+    HDMI carries 5V on one of the pins). This is often used to power an
+    eeprom which contains EDID information, such that the source can
+    read the EDID even if the sink is in standby/power off. Each bit
+    corresponds to an input pad on the receiver. If an input pad
+    cannot detect whether power is present, then the bit for that pad
+    will be 0. This read-only control is applicable to DVI-D, HDMI and
+    DisplayPort connectors.
+
+``V4L2_CID_DV_RX_RGB_RANGE``
+    (enum)
+
+enum v4l2_dv_rgb_range -
+    Select the quantization range for RGB input. V4L2_DV_RANGE_AUTO
+    follows the RGB quantization range specified in the standard for the
+    video interface (ie. :ref:`cea861` for HDMI).
+    V4L2_DV_RANGE_LIMITED and V4L2_DV_RANGE_FULL override the
+    standard to be compatible with sources that have not implemented the
+    standard correctly (unfortunately quite common for HDMI and DVI-D).
+    Full range allows all possible values to be used whereas limited
+    range sets the range to (16 << (N-8)) - (235 << (N-8)) where N is
+    the number of bits per component. This control is applicable to VGA,
+    DVI-A/D, HDMI and DisplayPort connectors.
+
+``V4L2_CID_DV_RX_IT_CONTENT_TYPE``
+    (enum)
+
+enum v4l2_dv_it_content_type -
+    Reads the IT Content Type of the received video. This information is
+    sent over HDMI and DisplayPort connectors as part of the AVI
+    InfoFrame. The term 'IT Content' is used for content that originates
+    from a computer as opposed to content from a TV broadcast or an
+    analog source. See ``V4L2_CID_DV_TX_IT_CONTENT_TYPE`` for the
+    available content types.
+
+
+.. _fm-rx-controls:
+
+FM Receiver Control Reference
+=============================
+
+The FM Receiver (FM_RX) class includes controls for common features of
+FM Reception capable devices.
+
+
+.. _fm-rx-control-id:
+
+FM_RX Control IDs
+-----------------
+
+``V4L2_CID_FM_RX_CLASS (class)``
+    The FM_RX class descriptor. Calling
+    :ref:`VIDIOC_QUERYCTRL` for this control will
+    return a description of this control class.
+
+``V4L2_CID_RDS_RECEPTION (boolean)``
+    Enables/disables RDS reception by the radio tuner
+
+``V4L2_CID_RDS_RX_PTY (integer)``
+    Gets RDS Programme Type field. This encodes up to 31 pre-defined
+    programme types.
+
+``V4L2_CID_RDS_RX_PS_NAME (string)``
+    Gets the Programme Service name (PS_NAME). It is intended for
+    static display on a receiver. It is the primary aid to listeners in
+    programme service identification and selection. In Annex E of
+    :ref:`iec62106`, the RDS specification, there is a full
+    description of the correct character encoding for Programme Service
+    name strings. Also from RDS specification, PS is usually a single
+    eight character text. However, it is also possible to find receivers
+    which can scroll strings sized as 8 x N characters. So, this control
+    must be configured with steps of 8 characters. The result is it must
+    always contain a string with size multiple of 8.
+
+``V4L2_CID_RDS_RX_RADIO_TEXT (string)``
+    Gets the Radio Text info. It is a textual description of what is
+    being broadcasted. RDS Radio Text can be applied when broadcaster
+    wishes to transmit longer PS names, programme-related information or
+    any other text. In these cases, RadioText can be used in addition to
+    ``V4L2_CID_RDS_RX_PS_NAME``. The encoding for Radio Text strings is
+    also fully described in Annex E of :ref:`iec62106`. The length of
+    Radio Text strings depends on which RDS Block is being used to
+    transmit it, either 32 (2A block) or 64 (2B block). However, it is
+    also possible to find receivers which can scroll strings sized as 32
+    x N or 64 x N characters. So, this control must be configured with
+    steps of 32 or 64 characters. The result is it must always contain a
+    string with size multiple of 32 or 64.
+
+``V4L2_CID_RDS_RX_TRAFFIC_ANNOUNCEMENT (boolean)``
+    If set, then a traffic announcement is in progress.
+
+``V4L2_CID_RDS_RX_TRAFFIC_PROGRAM (boolean)``
+    If set, then the tuned programme carries traffic announcements.
+
+``V4L2_CID_RDS_RX_MUSIC_SPEECH (boolean)``
+    If set, then this channel broadcasts music. If cleared, then it
+    broadcasts speech. If the transmitter doesn't make this distinction,
+    then it will be set.
+
+``V4L2_CID_TUNE_DEEMPHASIS``
+    (enum)
+
+enum v4l2_deemphasis -
+    Configures the de-emphasis value for reception. A de-emphasis filter
+    is applied to the broadcast to accentuate the high audio
+    frequencies. Depending on the region, a time constant of either 50
+    or 75 useconds is used. The enum v4l2_deemphasis defines possible
+    values for de-emphasis. Here they are:
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - ``V4L2_DEEMPHASIS_DISABLED``
+      - No de-emphasis is applied.
+    * - ``V4L2_DEEMPHASIS_50_uS``
+      - A de-emphasis of 50 uS is used.
+    * - ``V4L2_DEEMPHASIS_75_uS``
+      - A de-emphasis of 75 uS is used.
+
+
+
+
+.. _detect-controls:
+
+Detect Control Reference
+========================
+
+The Detect class includes controls for common features of various motion
+or object detection capable devices.
+
+
+.. _detect-control-id:
+
+Detect Control IDs
+------------------
+
+``V4L2_CID_DETECT_CLASS (class)``
+    The Detect class descriptor. Calling
+    :ref:`VIDIOC_QUERYCTRL` for this control will
+    return a description of this control class.
+
+``V4L2_CID_DETECT_MD_MODE (menu)``
+    Sets the motion detection mode.
+
+.. tabularcolumns:: |p{7.5cm}|p{10.0cm}|
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - ``V4L2_DETECT_MD_MODE_DISABLED``
+      - Disable motion detection.
+    * - ``V4L2_DETECT_MD_MODE_GLOBAL``
+      - Use a single motion detection threshold.
+    * - ``V4L2_DETECT_MD_MODE_THRESHOLD_GRID``
+      - The image is divided into a grid, each cell with its own motion
+	detection threshold. These thresholds are set through the
+	``V4L2_CID_DETECT_MD_THRESHOLD_GRID`` matrix control.
+    * - ``V4L2_DETECT_MD_MODE_REGION_GRID``
+      - The image is divided into a grid, each cell with its own region
+	value that specifies which per-region motion detection thresholds
+	should be used. Each region has its own thresholds. How these
+	per-region thresholds are set up is driver-specific. The region
+	values for the grid are set through the
+	``V4L2_CID_DETECT_MD_REGION_GRID`` matrix control.
+
+
+
+``V4L2_CID_DETECT_MD_GLOBAL_THRESHOLD (integer)``
+    Sets the global motion detection threshold to be used with the
+    ``V4L2_DETECT_MD_MODE_GLOBAL`` motion detection mode.
+
+``V4L2_CID_DETECT_MD_THRESHOLD_GRID (__u16 matrix)``
+    Sets the motion detection thresholds for each cell in the grid. To
+    be used with the ``V4L2_DETECT_MD_MODE_THRESHOLD_GRID`` motion
+    detection mode. Matrix element (0, 0) represents the cell at the
+    top-left of the grid.
+
+``V4L2_CID_DETECT_MD_REGION_GRID (__u8 matrix)``
+    Sets the motion detection region value for each cell in the grid. To
+    be used with the ``V4L2_DETECT_MD_MODE_REGION_GRID`` motion
+    detection mode. Matrix element (0, 0) represents the cell at the
+    top-left of the grid.
+
+
+.. _rf-tuner-controls:
+
+RF Tuner Control Reference
+==========================
+
+The RF Tuner (RF_TUNER) class includes controls for common features of
+devices having RF tuner.
+
+In this context, RF tuner is radio receiver circuit between antenna and
+demodulator. It receives radio frequency (RF) from the antenna and
+converts that received signal to lower intermediate frequency (IF) or
+baseband frequency (BB). Tuners that could do baseband output are often
+called Zero-IF tuners. Older tuners were typically simple PLL tuners
+inside a metal box, whilst newer ones are highly integrated chips
+without a metal box "silicon tuners". These controls are mostly
+applicable for new feature rich silicon tuners, just because older
+tuners does not have much adjustable features.
+
+For more information about RF tuners see
+`Tuner (radio) <http://en.wikipedia.org/wiki/Tuner_%28radio%29>`__
+and `RF front end <http://en.wikipedia.org/wiki/RF_front_end>`__
+from Wikipedia.
+
+
+.. _rf-tuner-control-id:
+
+RF_TUNER Control IDs
+--------------------
+
+``V4L2_CID_RF_TUNER_CLASS (class)``
+    The RF_TUNER class descriptor. Calling
+    :ref:`VIDIOC_QUERYCTRL` for this control will
+    return a description of this control class.
+
+``V4L2_CID_RF_TUNER_BANDWIDTH_AUTO (boolean)``
+    Enables/disables tuner radio channel bandwidth configuration. In
+    automatic mode bandwidth configuration is performed by the driver.
+
+``V4L2_CID_RF_TUNER_BANDWIDTH (integer)``
+    Filter(s) on tuner signal path are used to filter signal according
+    to receiving party needs. Driver configures filters to fulfill
+    desired bandwidth requirement. Used when
+    V4L2_CID_RF_TUNER_BANDWIDTH_AUTO is not set. Unit is in Hz. The
+    range and step are driver-specific.
+
+``V4L2_CID_RF_TUNER_LNA_GAIN_AUTO (boolean)``
+    Enables/disables LNA automatic gain control (AGC)
+
+``V4L2_CID_RF_TUNER_MIXER_GAIN_AUTO (boolean)``
+    Enables/disables mixer automatic gain control (AGC)
+
+``V4L2_CID_RF_TUNER_IF_GAIN_AUTO (boolean)``
+    Enables/disables IF automatic gain control (AGC)
+
+``V4L2_CID_RF_TUNER_RF_GAIN (integer)``
+    The RF amplifier is the very first amplifier on the receiver signal
+    path, just right after the antenna input. The difference between the
+    LNA gain and the RF gain in this document is that the LNA gain is
+    integrated in the tuner chip while the RF gain is a separate chip.
+    There may be both RF and LNA gain controls in the same device. The
+    range and step are driver-specific.
+
+``V4L2_CID_RF_TUNER_LNA_GAIN (integer)``
+    LNA (low noise amplifier) gain is first gain stage on the RF tuner
+    signal path. It is located very close to tuner antenna input. Used
+    when ``V4L2_CID_RF_TUNER_LNA_GAIN_AUTO`` is not set. See
+    ``V4L2_CID_RF_TUNER_RF_GAIN`` to understand how RF gain and LNA gain
+    differs from the each others. The range and step are
+    driver-specific.
+
+``V4L2_CID_RF_TUNER_MIXER_GAIN (integer)``
+    Mixer gain is second gain stage on the RF tuner signal path. It is
+    located inside mixer block, where RF signal is down-converted by the
+    mixer. Used when ``V4L2_CID_RF_TUNER_MIXER_GAIN_AUTO`` is not set.
+    The range and step are driver-specific.
+
+``V4L2_CID_RF_TUNER_IF_GAIN (integer)``
+    IF gain is last gain stage on the RF tuner signal path. It is
+    located on output of RF tuner. It controls signal level of
+    intermediate frequency output or baseband output. Used when
+    ``V4L2_CID_RF_TUNER_IF_GAIN_AUTO`` is not set. The range and step
+    are driver-specific.
+
+``V4L2_CID_RF_TUNER_PLL_LOCK (boolean)``
+    Is synthesizer PLL locked? RF tuner is receiving given frequency
+    when that control is set. This is a read-only control.
+
+.. [#f1]
+   This control may be changed to a menu control in the future, if more
+   options are required.