Adding upstream version 4.19.249.upstream/4.19.249upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 149 insertions, 0 deletions

diff --git a/Documentation/pcmcia/driver-changes.txt b/Documentation/pcmcia/driver-changes.txt
new file mode 100644
index 000000000..78355c4c2
--- /dev/null
+++ b/Documentation/pcmcia/driver-changes.txt
@@ -0,0 +1,149 @@
+This file details changes in 2.6 which affect PCMCIA card driver authors:
+* pcmcia_loop_config() and autoconfiguration (as of 2.6.36)
+   If struct pcmcia_device *p_dev->config_flags is set accordingly,
+   pcmcia_loop_config() now sets up certain configuration values
+   automatically, though the driver may still override the settings
+   in the callback function. The following autoconfiguration options
+   are provided at the moment:
+	CONF_AUTO_CHECK_VCC : check for matching Vcc
+	CONF_AUTO_SET_VPP   : set Vpp
+	CONF_AUTO_AUDIO     : auto-enable audio line, if required
+	CONF_AUTO_SET_IO    : set ioport resources (->resource[0,1])
+	CONF_AUTO_SET_IOMEM : set first iomem resource (->resource[2])
+
+* pcmcia_request_configuration -> pcmcia_enable_device (as of 2.6.36)
+   pcmcia_request_configuration() got renamed to pcmcia_enable_device(),
+   as it mirrors pcmcia_disable_device(). Configuration settings are now
+   stored in struct pcmcia_device, e.g. in the fields config_flags,
+   config_index, config_base, vpp.
+
+* pcmcia_request_window changes (as of 2.6.36)
+   Instead of win_req_t, drivers are now requested to fill out
+   struct pcmcia_device *p_dev->resource[2,3,4,5] for up to four ioport
+   ranges. After a call to pcmcia_request_window(), the regions found there
+   are reserved and may be used immediately -- until pcmcia_release_window()
+   is called.
+
+* pcmcia_request_io changes (as of 2.6.36)
+   Instead of io_req_t, drivers are now requested to fill out
+   struct pcmcia_device *p_dev->resource[0,1] for up to two ioport
+   ranges. After a call to pcmcia_request_io(), the ports found there
+   are reserved, after calling pcmcia_request_configuration(), they may
+   be used.
+
+* No dev_info_t, no cs_types.h (as of 2.6.36)
+   dev_info_t and a few other typedefs are removed. No longer use them
+   in PCMCIA device drivers. Also, do not include pcmcia/cs_types.h, as
+   this file is gone.
+
+* No dev_node_t (as of 2.6.35)
+   There is no more need to fill out a "dev_node_t" structure.
+
+* New IRQ request rules (as of 2.6.35)
+   Instead of the old pcmcia_request_irq() interface, drivers may now
+   choose between:
+   - calling request_irq/free_irq directly. Use the IRQ from *p_dev->irq.
+   - use pcmcia_request_irq(p_dev, handler_t); the PCMCIA core will
+     clean up automatically on calls to pcmcia_disable_device() or
+     device ejection.
+
+* no cs_error / CS_CHECK / CONFIG_PCMCIA_DEBUG (as of 2.6.33)
+   Instead of the cs_error() callback or the CS_CHECK() macro, please use
+   Linux-style checking of return values, and -- if necessary -- debug
+   messages using "dev_dbg()" or "pr_debug()".
+
+* New CIS tuple access (as of 2.6.33)
+   Instead of pcmcia_get_{first,next}_tuple(), pcmcia_get_tuple_data() and
+   pcmcia_parse_tuple(), a driver shall use "pcmcia_get_tuple()" if it is
+   only interested in one (raw) tuple, or "pcmcia_loop_tuple()" if it is
+   interested in all tuples of one type. To decode the MAC from CISTPL_FUNCE,
+   a new helper "pcmcia_get_mac_from_cis()" was added.
+
+* New configuration loop helper (as of 2.6.28)
+   By calling pcmcia_loop_config(), a driver can iterate over all available
+   configuration options. During a driver's probe() phase, one doesn't need
+   to use pcmcia_get_{first,next}_tuple, pcmcia_get_tuple_data and
+   pcmcia_parse_tuple directly in most if not all cases.
+
+* New release helper (as of 2.6.17)
+   Instead of calling pcmcia_release_{configuration,io,irq,win}, all that's
+   necessary now is calling pcmcia_disable_device. As there is no valid
+   reason left to call pcmcia_release_io and pcmcia_release_irq, the
+   exports for them were removed.
+
+* Unify detach and REMOVAL event code, as well as attach and INSERTION
+  code (as of 2.6.16)
+       void (*remove)          (struct pcmcia_device *dev);
+       int (*probe)            (struct pcmcia_device *dev);
+
+* Move suspend, resume and reset out of event handler (as of 2.6.16)
+       int (*suspend)          (struct pcmcia_device *dev);
+       int (*resume)           (struct pcmcia_device *dev);
+  should be initialized in struct pcmcia_driver, and handle
+  (SUSPEND == RESET_PHYSICAL) and (RESUME == CARD_RESET) events
+
+* event handler initialization in struct pcmcia_driver (as of 2.6.13)
+   The event handler is notified of all events, and must be initialized
+   as the event() callback in the driver's struct pcmcia_driver.
+
+* pcmcia/version.h should not be used (as of 2.6.13)
+   This file will be removed eventually.
+
+* in-kernel device<->driver matching (as of 2.6.13)
+   PCMCIA devices and their correct drivers can now be matched in
+   kernelspace. See 'devicetable.txt' for details.
+
+* Device model integration (as of 2.6.11)
+   A struct pcmcia_device is registered with the device model core,
+   and can be used (e.g. for SET_NETDEV_DEV) by using
+   handle_to_dev(client_handle_t * handle).
+
+* Convert internal I/O port addresses to unsigned int (as of 2.6.11)
+   ioaddr_t should be replaced by unsigned int in PCMCIA card drivers.
+
+* irq_mask and irq_list parameters (as of 2.6.11)
+   The irq_mask and irq_list parameters should no longer be used in
+   PCMCIA card drivers. Instead, it is the job of the PCMCIA core to
+   determine which IRQ should be used. Therefore, link->irq.IRQInfo2
+   is ignored.
+
+* client->PendingEvents is gone (as of 2.6.11)
+   client->PendingEvents is no longer available.
+
+* client->Attributes are gone (as of 2.6.11)
+   client->Attributes is unused, therefore it is removed from all
+   PCMCIA card drivers
+
+* core functions no longer available (as of 2.6.11)
+   The following functions have been removed from the kernel source
+   because they are unused by all in-kernel drivers, and no external
+   driver was reported to rely on them:
+	pcmcia_get_first_region()
+	pcmcia_get_next_region()
+	pcmcia_modify_window()
+	pcmcia_set_event_mask()
+	pcmcia_get_first_window()
+	pcmcia_get_next_window()
+
+* device list iteration upon module removal (as of 2.6.10)
+   It is no longer necessary to iterate on the driver's internal
+   client list and call the ->detach() function upon module removal.
+
+* Resource management. (as of 2.6.8)
+   Although the PCMCIA subsystem will allocate resources for cards,
+   it no longer marks these resources busy. This means that driver
+   authors are now responsible for claiming your resources as per
+   other drivers in Linux. You should use request_region() to mark
+   your IO regions in-use, and request_mem_region() to mark your
+   memory regions in-use. The name argument should be a pointer to
+   your driver name. Eg, for pcnet_cs, name should point to the
+   string "pcnet_cs".
+
+* CardServices is gone
+  CardServices() in 2.4 is just a big switch statement to call various
+  services.  In 2.6, all of those entry points are exported and called
+  directly (except for pcmcia_report_error(), just use cs_error() instead).
+
+* struct pcmcia_driver
+  You need to use struct pcmcia_driver and pcmcia_{un,}register_driver
+  instead of {un,}register_pccard_driver