Adding upstream version 4.19.249.upstream/4.19.249upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

24 files changed, 3190 insertions, 0 deletions

diff --git a/arch/arm64/boot/dts/marvell/Makefile b/arch/arm64/boot/dts/marvell/Makefile
new file mode 100644
index 000000000..ea9d49f2a
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/Makefile
@@ -0,0 +1,8 @@
+# SPDX-License-Identifier: GPL-2.0
+# Mvebu SoC Family
+dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-db.dtb
+dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-espressobin.dtb
+dtb-$(CONFIG_ARCH_MVEBU) += armada-7040-db.dtb
+dtb-$(CONFIG_ARCH_MVEBU) += armada-8040-db.dtb
+dtb-$(CONFIG_ARCH_MVEBU) += armada-8040-mcbin.dtb
+dtb-$(CONFIG_ARCH_MVEBU) += armada-8080-db.dtb
diff --git a/arch/arm64/boot/dts/marvell/armada-371x.dtsi b/arch/arm64/boot/dts/marvell/armada-371x.dtsi
new file mode 100644
index 000000000..dc1182ec9
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-371x.dtsi
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree Include file for Marvell Armada 371x family of SoCs
+ * (also named 88F3710)
+ *
+ * Copyright (C) 2016 Marvell
+ *
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ *
+ */
+
+#include "armada-37xx.dtsi"
+
+/ {
+	model = "Marvell Armada 3710 SoC";
+	compatible = "marvell,armada3710", "marvell,armada3700";
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-3720-db.dts b/arch/arm64/boot/dts/marvell/armada-3720-db.dts
new file mode 100644
index 000000000..3e5789f37
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-3720-db.dts
@@ -0,0 +1,220 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for Marvell Armada 3720 development board
+ * (DB-88F3720-DDR3)
+ * Copyright (C) 2016 Marvell
+ *
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ *
+ * This file is compatible with the version 1.4 and the version 2.0 of
+ * the board, however the CON numbers are different between the 2
+ * version
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include "armada-372x.dtsi"
+
+/ {
+	model = "Marvell Armada 3720 Development Board DB-88F3720-DDR3";
+	compatible = "marvell,armada-3720-db", "marvell,armada3720", "marvell,armada3710";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x00000000 0x00000000 0x20000000>;
+	};
+
+	exp_usb3_vbus: usb3-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb3-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		regulator-always-on;
+		gpio = <&gpio_exp 1 GPIO_ACTIVE_HIGH>;
+	};
+
+	usb3_phy: usb3-phy {
+		compatible = "usb-nop-xceiv";
+		vcc-supply = <&exp_usb3_vbus>;
+	};
+
+	vcc_sd_reg1: regulator {
+		compatible = "regulator-gpio";
+		regulator-name = "vcc_sd1";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+
+		gpios = <&gpiosb 23 GPIO_ACTIVE_HIGH>;
+		gpios-states = <0>;
+		states = <1800000 0x1
+			  3300000 0x0>;
+		enable-active-high;
+	};
+
+	vcc_sd_reg2: regulator-vmcc {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_sd2";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&gpio_exp 4 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+/* Gigabit module on CON19(V2.0)/CON21(V1.4) */
+&eth0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>;
+	phy-mode = "rgmii-id";
+	phy = <&phy0>;
+	status = "okay";
+};
+
+/* Gigabit module on CON18(V2.0)/CON20(V1.4) */
+&eth1 {
+	phy-mode = "sgmii";
+	phy = <&phy1>;
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+	status = "okay";
+
+	gpio_exp: pca9555@22 {
+		compatible = "nxp,pca9555";
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		reg = <0x22>;
+		/*
+		 * IO0_0: PWR_EN_USB2	IO1_0: PWR_EN_VTT
+		 * IO0_1: PWR_EN_USB23	IO1_1: MPCIE_WDISABLE
+		 * IO0_2: PWR_EN_SATA	IO1_2: RGMII_DEV_RSTN
+		 * IO0_3: PWR_EN_PCIE	IO1_3: SGMII_DEV_RSTN
+		 * IO0_4: PWR_EN_SD
+		 * IO0_5: PWR_EN_EMMC
+		 * IO0_6: PWR_EN_RGMII	IO1_6: SATA_USB3.0_SEL
+		 * IO0_7: PWR_EN_SGMII	IO1_7: PWR_MCI_PS
+		 */
+	};
+
+	rtc@68  {
+		/* PT7C4337A from pericom fully compatible with the ds1337 */
+		compatible = "dallas,ds1337";
+		reg = <0x68>;
+	};
+};
+
+&mdio {
+	status = "okay";
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+/* CON15(V2.0)/CON17(V1.4) : PCIe / CON15(V2.0)/CON12(V1.4) :mini-PCIe */
+&pcie0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie_reset_pins &pcie_clkreq_pins>;
+	reset-gpios = <&gpiosb 3 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+/* CON3 */
+&sata {
+	status = "okay";
+};
+
+&sdhci0 {
+	non-removable;
+	bus-width = <8>;
+	mmc-ddr-1_8v;
+	mmc-hs400-1_8v;
+	marvell,pad-type = "fixed-1-8v";
+	status = "okay";
+};
+
+/* SD slot module on CON14(V2.0)/CON15(V1.4) */
+&sdhci1 {
+	wp-inverted;
+	cd-gpios = <&gpiosb 2 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
+	marvell,pad-type = "sd";
+	vqmmc-supply = <&vcc_sd_reg1>;
+	vmmc-supply = <&vcc_sd_reg2>;
+	status = "okay";
+};
+
+&spi0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi_quad_pins>;
+
+	m25p80@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <108000000>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <4>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			partition@0 {
+				label = "bootloader";
+				reg = <0x0 0x200000>;
+			};
+			partition@200000 {
+				label = "U-boot Env";
+				reg = <0x200000 0x10000>;
+			};
+			partition@210000 {
+				label = "Linux";
+				reg = <0x210000 0xDF0000>;
+			};
+		};
+	};
+};
+
+/*
+ * Exported on the micro USB connector CON30(V2.0)/CON32(V1.4) through
+ * an FTDI (also on CON24(V2.0)/CON26(V1.4)).
+ */
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+	status = "okay";
+};
+
+/* CON26(V2.0)/CON28(V1.4) */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+	status = "okay";
+};
+
+/* CON27(V2.0)/CON29(V1.4) */
+&usb2 {
+	status = "okay";
+};
+
+/* CON29(V2.0)/CON31(V1.4) */
+&usb3 {
+	status = "okay";
+	usb-phy = <&usb3_phy>;
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts
new file mode 100644
index 000000000..f36089198
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts
@@ -0,0 +1,197 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for Globalscale Marvell ESPRESSOBin Board
+ * Copyright (C) 2016 Marvell
+ *
+ * Romain Perier <romain.perier@free-electrons.com>
+ *
+ */
+/*
+ * Schematic available at http://espressobin.net/wp-content/uploads/2017/08/ESPRESSObin_V5_Schematics.pdf
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include "armada-372x.dtsi"
+
+/ {
+	model = "Globalscale Marvell ESPRESSOBin Board";
+	compatible = "globalscale,espressobin", "marvell,armada3720", "marvell,armada3710";
+
+	aliases {
+		ethernet0 = &eth0;
+		/* for dsa slave device */
+		ethernet1 = &switch0port1;
+		ethernet2 = &switch0port2;
+		ethernet3 = &switch0port3;
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x00000000 0x00000000 0x20000000>;
+	};
+
+	vcc_sd_reg1: regulator {
+		compatible = "regulator-gpio";
+		regulator-name = "vcc_sd1";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+
+		gpios = <&gpionb 4 GPIO_ACTIVE_HIGH>;
+		gpios-states = <0>;
+		states = <1800000 0x1
+			  3300000 0x0>;
+		enable-active-high;
+	};
+};
+
+/* J9 */
+&pcie0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie_reset_pins &pcie_clkreq_pins>;
+	reset-gpios = <&gpiosb 3 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+/* J6 */
+&sata {
+	status = "okay";
+};
+
+/* J1 */
+&sdhci1 {
+	wp-inverted;
+	bus-width = <4>;
+	cd-gpios = <&gpionb 3 GPIO_ACTIVE_LOW>;
+	marvell,pad-type = "sd";
+	vqmmc-supply = <&vcc_sd_reg1>;
+	status = "okay";
+};
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		reg = <0>;
+		compatible = "winbond,w25q32dw", "jedec,spi-flash";
+		spi-max-frequency = <104000000>;
+		m25p,fast-read;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "uboot";
+				reg = <0 0x180000>;
+			};
+
+			partition@180000 {
+				label = "ubootenv";
+				reg = <0x180000 0x10000>;
+			};
+		};
+	};
+};
+
+/* Exported on the micro USB connector J5 through an FTDI */
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+	status = "okay";
+};
+
+/*
+ * Connector J17 and J18 expose a number of different features. Some pins are
+ * multiplexed. This is the case for instance for the following features:
+ * - UART1 (pin 24 = RX, pin 26 = TX). See armada-3720-db.dts for an example of
+ *   how to enable it. Beware that the signals are 1.8V TTL.
+ * - I2C
+ * - SPI
+ * - MMC
+ */
+
+/* J7 */
+&usb3 {
+	status = "okay";
+};
+
+/* J8 */
+&usb2 {
+	status = "okay";
+};
+
+&mdio {
+	switch0: switch0@1 {
+		compatible = "marvell,mv88e6085";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <1>;
+
+		dsa,member = <0 0>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			switch0port0: port@0 {
+				reg = <0>;
+				label = "cpu";
+				ethernet = <&eth0>;
+			};
+
+			switch0port1: port@1 {
+				reg = <1>;
+				label = "wan";
+				phy-handle = <&switch0phy0>;
+			};
+
+			switch0port2: port@2 {
+				reg = <2>;
+				label = "lan0";
+				phy-handle = <&switch0phy1>;
+			};
+
+			switch0port3: port@3 {
+				reg = <3>;
+				label = "lan1";
+				phy-handle = <&switch0phy2>;
+			};
+
+		};
+
+		mdio {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			switch0phy0: switch0phy0@11 {
+				reg = <0x11>;
+			};
+			switch0phy1: switch0phy1@12 {
+				reg = <0x12>;
+			};
+			switch0phy2: switch0phy2@13 {
+				reg = <0x13>;
+			};
+		};
+	};
+};
+
+&eth0 {
+	phy-mode = "rgmii-id";
+	status = "okay";
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-372x.dtsi b/arch/arm64/boot/dts/marvell/armada-372x.dtsi
new file mode 100644
index 000000000..97558a64e
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-372x.dtsi
@@ -0,0 +1,27 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree Include file for Marvell Armada 372x family of SoCs
+ * (also named 88F3720)
+ *
+ * Copyright (C) 2016 Marvell
+ *
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ *
+ */
+
+#include "armada-37xx.dtsi"
+
+/ {
+	model = "Marvell Armada 3720 SoC";
+	compatible = "marvell,armada3720", "marvell,armada3710";
+
+	cpus {
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53","arm,armv8";
+			reg = <0x1>;
+			clocks = <&nb_periph_clk 16>;
+			enable-method = "psci";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
new file mode 100644
index 000000000..7500be1a1
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
@@ -0,0 +1,408 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree Include file for Marvell Armada 37xx family of SoCs.
+ *
+ * Copyright (C) 2016 Marvell
+ *
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ *
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	model = "Marvell Armada 37xx SoC";
+	compatible = "marvell,armada3700";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/*
+		 * The PSCI firmware region depicted below is the default one
+		 * and should be updated by the bootloader.
+		 */
+		psci-area@4000000 {
+			reg = <0 0x4000000 0 0x200000>;
+			no-map;
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53", "arm,armv8";
+			reg = <0>;
+			clocks = <&nb_periph_clk 16>;
+			enable-method = "psci";
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		internal-regs@d0000000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "simple-bus";
+			/* 32M internal register @ 0xd000_0000 */
+			ranges = <0x0 0x0 0xd0000000 0x2000000>;
+
+			spi0: spi@10600 {
+				compatible = "marvell,armada-3700-spi";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x10600 0xA00>;
+				clocks = <&nb_periph_clk 7>;
+				interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+				num-cs = <4>;
+				status = "disabled";
+			};
+
+			i2c0: i2c@11000 {
+				compatible = "marvell,armada-3700-i2c";
+				reg = <0x11000 0x24>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&nb_periph_clk 10>;
+				interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+				mrvl,i2c-fast-mode;
+				status = "disabled";
+			};
+
+			i2c1: i2c@11080 {
+				compatible = "marvell,armada-3700-i2c";
+				reg = <0x11080 0x24>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&nb_periph_clk 9>;
+				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+				mrvl,i2c-fast-mode;
+				status = "disabled";
+			};
+
+			avs: avs@11500 {
+				compatible = "marvell,armada-3700-avs",
+					     "syscon";
+				reg = <0x11500 0x40>;
+			};
+
+			uart0: serial@12000 {
+				compatible = "marvell,armada-3700-uart";
+				reg = <0x12000 0x18>;
+				clocks = <&xtalclk>;
+				interrupts =
+				<GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "uart-sum", "uart-tx", "uart-rx";
+				status = "disabled";
+			};
+
+			uart1: serial@12200 {
+				compatible = "marvell,armada-3700-uart-ext";
+				reg = <0x12200 0x30>;
+				clocks = <&xtalclk>;
+				interrupts =
+				<GIC_SPI 30 IRQ_TYPE_EDGE_RISING>,
+				<GIC_SPI 31 IRQ_TYPE_EDGE_RISING>;
+				interrupt-names = "uart-tx", "uart-rx";
+				status = "disabled";
+			};
+
+			nb_periph_clk: nb-periph-clk@13000 {
+				compatible = "marvell,armada-3700-periph-clock-nb",
+					     "syscon";
+				reg = <0x13000 0x100>;
+				clocks = <&tbg 0>, <&tbg 1>, <&tbg 2>,
+				<&tbg 3>, <&xtalclk>;
+				#clock-cells = <1>;
+			};
+
+			sb_periph_clk: sb-periph-clk@18000 {
+				compatible = "marvell,armada-3700-periph-clock-sb";
+				reg = <0x18000 0x100>;
+				clocks = <&tbg 0>, <&tbg 1>, <&tbg 2>,
+				<&tbg 3>, <&xtalclk>;
+				#clock-cells = <1>;
+			};
+
+			tbg: tbg@13200 {
+				compatible = "marvell,armada-3700-tbg-clock";
+				reg = <0x13200 0x100>;
+				clocks = <&xtalclk>;
+				#clock-cells = <1>;
+			};
+
+			pinctrl_nb: pinctrl@13800 {
+				compatible = "marvell,armada3710-nb-pinctrl",
+					     "syscon", "simple-mfd";
+				reg = <0x13800 0x100>, <0x13C00 0x20>;
+				/* MPP1[19:0] */
+				gpionb: gpio {
+					#gpio-cells = <2>;
+					gpio-ranges = <&pinctrl_nb 0 0 36>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					interrupts =
+					<GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+				};
+
+				xtalclk: xtal-clk {
+					compatible = "marvell,armada-3700-xtal-clock";
+					clock-output-names = "xtal";
+					#clock-cells = <0>;
+				};
+
+				spi_quad_pins: spi-quad-pins {
+					groups = "spi_quad";
+					function = "spi";
+				};
+
+				i2c1_pins: i2c1-pins {
+					groups = "i2c1";
+					function = "i2c";
+				};
+
+				i2c2_pins: i2c2-pins {
+					groups = "i2c2";
+					function = "i2c";
+				};
+
+				uart1_pins: uart1-pins {
+					groups = "uart1";
+					function = "uart";
+				};
+
+				uart2_pins: uart2-pins {
+					groups = "uart2";
+					function = "uart";
+				};
+			};
+
+			nb_pm: syscon@14000 {
+				compatible = "marvell,armada-3700-nb-pm",
+					     "syscon";
+				reg = <0x14000 0x60>;
+			};
+
+			pinctrl_sb: pinctrl@18800 {
+				compatible = "marvell,armada3710-sb-pinctrl",
+					     "syscon", "simple-mfd";
+				reg = <0x18800 0x100>, <0x18C00 0x20>;
+				/* MPP2[23:0] */
+				gpiosb: gpio {
+					#gpio-cells = <2>;
+					gpio-ranges = <&pinctrl_sb 0 0 30>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					interrupts =
+					<GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
+				};
+
+				rgmii_pins: mii-pins {
+					groups = "rgmii";
+					function = "mii";
+				};
+
+				pcie_reset_pins: pcie-reset-pins {
+					groups = "pcie1";
+					function = "gpio";
+				};
+
+				pcie_clkreq_pins: pcie-clkreq-pins {
+					groups = "pcie1_clkreq";
+					function = "pcie";
+				};
+			};
+
+			eth0: ethernet@30000 {
+				   compatible = "marvell,armada-3700-neta";
+				   reg = <0x30000 0x4000>;
+				   interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+				   clocks = <&sb_periph_clk 8>;
+				   status = "disabled";
+			};
+
+			mdio: mdio@32004 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "marvell,orion-mdio";
+				reg = <0x32004 0x4>;
+			};
+
+			eth1: ethernet@40000 {
+				compatible = "marvell,armada-3700-neta";
+				reg = <0x40000 0x4000>;
+				interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&sb_periph_clk 7>;
+				status = "disabled";
+			};
+
+			usb3: usb@58000 {
+				compatible = "marvell,armada3700-xhci",
+				"generic-xhci";
+				reg = <0x58000 0x4000>;
+				interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&sb_periph_clk 12>;
+				status = "disabled";
+			};
+
+			usb2: usb@5e000 {
+				compatible = "marvell,armada-3700-ehci";
+				reg = <0x5e000 0x2000>;
+				interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			xor@60900 {
+				compatible = "marvell,armada-3700-xor";
+				reg = <0x60900 0x100>,
+				      <0x60b00 0x100>;
+
+				xor10 {
+					interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+				};
+				xor11 {
+					interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+				};
+			};
+
+			crypto: crypto@90000 {
+				compatible = "inside-secure,safexcel-eip97ies";
+				reg = <0x90000 0x20000>;
+				interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "mem", "ring0", "ring1",
+						  "ring2", "ring3", "eip";
+				clocks = <&nb_periph_clk 15>;
+			};
+
+			sdhci1: sdhci@d0000 {
+				compatible = "marvell,armada-3700-sdhci",
+					     "marvell,sdhci-xenon";
+				reg = <0xd0000 0x300>,
+				      <0x1e808 0x4>;
+				interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&nb_periph_clk 0>;
+				clock-names = "core";
+				status = "disabled";
+			};
+
+			sdhci0: sdhci@d8000 {
+				compatible = "marvell,armada-3700-sdhci",
+					     "marvell,sdhci-xenon";
+				reg = <0xd8000 0x300>,
+				      <0x17808 0x4>;
+				interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&nb_periph_clk 0>;
+				clock-names = "core";
+				status = "disabled";
+			};
+
+			sata: sata@e0000 {
+				compatible = "marvell,armada-3700-ahci";
+				reg = <0xe0000 0x2000>;
+				interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			gic: interrupt-controller@1d00000 {
+				compatible = "arm,gic-v3";
+				#interrupt-cells = <3>;
+				interrupt-controller;
+				reg = <0x1d00000 0x10000>, /* GICD */
+				      <0x1d40000 0x40000>, /* GICR */
+				      <0x1d80000 0x2000>,  /* GICC */
+				      <0x1d90000 0x2000>,  /* GICH */
+				      <0x1da0000 0x20000>; /* GICV */
+				interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		pcie0: pcie@d0070000 {
+			compatible = "marvell,armada-3700-pcie";
+			device_type = "pci";
+			status = "disabled";
+			reg = <0 0xd0070000 0 0x20000>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			bus-range = <0x00 0xff>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <1>;
+			msi-parent = <&pcie0>;
+			msi-controller;
+			/*
+			 * The 128 MiB address range [0xe8000000-0xf0000000] is
+			 * dedicated for PCIe and can be assigned to 8 windows
+			 * with size a power of two. Use one 64 KiB window for
+			 * IO at the end and the remaining seven windows
+			 * (totaling 127 MiB) for MEM.
+			 */
+			ranges = <0x82000000 0 0xe8000000   0 0xe8000000   0 0x07f00000   /* Port 0 MEM */
+				  0x81000000 0 0xefff0000   0 0xefff0000   0 0x00010000>; /* Port 0 IO */
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0 0 0 1 &pcie_intc 0>,
+					<0 0 0 2 &pcie_intc 1>,
+					<0 0 0 3 &pcie_intc 2>,
+					<0 0 0 4 &pcie_intc 3>;
+			pcie_intc: interrupt-controller {
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-7020.dtsi b/arch/arm64/boot/dts/marvell/armada-7020.dtsi
new file mode 100644
index 000000000..4e46326dd
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-7020.dtsi
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2016 Marvell Technology Group Ltd.
+ *
+ * Device Tree file for the Armada 7020 SoC, made of an AP806 Dual and
+ * one CP110.
+ */
+
+#include "armada-ap806-dual.dtsi"
+#include "armada-70x0.dtsi"
+
+/ {
+	model = "Marvell Armada 7020";
+	compatible = "marvell,armada7020", "marvell,armada-ap806-dual",
+		     "marvell,armada-ap806";
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-7040-db.dts b/arch/arm64/boot/dts/marvell/armada-7040-db.dts
new file mode 100644
index 000000000..412efdb46
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-7040-db.dts
@@ -0,0 +1,265 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2016 Marvell Technology Group Ltd.
+ *
+ * Device Tree file for Marvell Armada 7040 Development board platform
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include "armada-7040.dtsi"
+
+/ {
+	model = "Marvell Armada 7040 DB board";
+	compatible = "marvell,armada7040-db", "marvell,armada7040",
+		     "marvell,armada-ap806-quad", "marvell,armada-ap806";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+
+	aliases {
+		ethernet0 = &cp0_eth0;
+		ethernet1 = &cp0_eth1;
+		ethernet2 = &cp0_eth2;
+	};
+
+	cp0_reg_usb3_0_vbus: cp0-usb3-0-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb3h0-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&expander0 0 GPIO_ACTIVE_HIGH>;
+	};
+
+	cp0_reg_usb3_1_vbus: cp0-usb3-1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb3h1-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&expander0 1 GPIO_ACTIVE_HIGH>;
+	};
+
+	cp0_usb3_0_phy: cp0-usb3-0-phy {
+		compatible = "usb-nop-xceiv";
+		vcc-supply = <&cp0_reg_usb3_0_vbus>;
+	};
+
+	cp0_usb3_1_phy: cp0-usb3-1-phy {
+		compatible = "usb-nop-xceiv";
+		vcc-supply = <&cp0_reg_usb3_1_vbus>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+	clock-frequency = <100000>;
+};
+
+&spi0 {
+	status = "okay";
+
+	spi-flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <10000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "U-Boot";
+				reg = <0 0x200000>;
+			};
+			partition@400000 {
+				label = "Filesystem";
+				reg = <0x200000 0xce0000>;
+			};
+		};
+	};
+};
+
+&uart0 {
+	status = "okay";
+	pinctrl-0 = <&uart0_pins>;
+	pinctrl-names = "default";
+};
+
+
+&cp0_pcie2 {
+	status = "okay";
+};
+
+&cp0_i2c0 {
+	status = "okay";
+	clock-frequency = <100000>;
+
+	expander0: pca9555@21 {
+		compatible = "nxp,pca9555";
+		pinctrl-names = "default";
+		gpio-controller;
+		#gpio-cells = <2>;
+		reg = <0x21>;
+		/*
+		 * IO0_0: USB3_PWR_EN0	IO1_0: USB_3_1_Dev_Detect
+		 * IO0_1: USB3_PWR_EN1	IO1_1: USB2_1_current_limit
+		 * IO0_2: DDR3_4_Detect	IO1_2: Hcon_IO_RstN
+		 * IO0_3: USB2_DEVICE_DETECT
+		 * IO0_4: GPIO_0	IO1_4: SD_Status
+		 * IO0_5: GPIO_1	IO1_5: LDO_5V_Enable
+		 * IO0_6: IHB_5V_Enable	IO1_6: PWR_EN_eMMC
+		 * IO0_7:		IO1_7: SDIO_Vcntrl
+		 */
+	};
+};
+
+&cp0_nand_controller {
+	/*
+	 * SPI on CPM and NAND have common pins on this board. We can
+	 * use only one at a time. To enable the NAND (which will
+	 * disable the SPI), the "status = "okay";" line have to be
+	 * added here.
+	 */
+	pinctrl-0 = <&nand_pins>, <&nand_rb>;
+	pinctrl-names = "default";
+
+	nand@0 {
+		reg = <0>;
+		label = "pxa3xx_nand-0";
+		nand-rb = <0>;
+		nand-on-flash-bbt;
+		nand-ecc-strength = <4>;
+		nand-ecc-step-size = <512>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "U-Boot";
+				reg = <0 0x200000>;
+			};
+
+			partition@200000 {
+				label = "Linux";
+				reg = <0x200000 0xe00000>;
+			};
+
+			partition@1000000 {
+				label = "Filesystem";
+				reg = <0x1000000 0x3f000000>;
+			};
+
+		};
+	};
+};
+
+&cp0_spi1 {
+	status = "okay";
+
+	spi-flash@0 {
+		#address-cells = <0x1>;
+		#size-cells = <0x1>;
+		compatible = "jedec,spi-nor";
+		reg = <0x0>;
+		spi-max-frequency = <20000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "U-Boot";
+				reg = <0x0 0x200000>;
+			};
+
+			partition@400000 {
+				label = "Filesystem";
+				reg = <0x200000 0xe00000>;
+			};
+		};
+	};
+};
+
+&cp0_sata0 {
+	status = "okay";
+};
+
+&cp0_usb3_0 {
+	usb-phy = <&cp0_usb3_0_phy>;
+	status = "okay";
+};
+
+&cp0_usb3_1 {
+	usb-phy = <&cp0_usb3_1_phy>;
+	status = "okay";
+};
+
+&ap_sdhci0 {
+	status = "okay";
+	bus-width = <4>;
+	no-1-8-v;
+	non-removable;
+};
+
+&cp0_sdhci0 {
+	status = "okay";
+	bus-width = <4>;
+	no-1-8-v;
+	cd-gpios = <&expander0 12 GPIO_ACTIVE_LOW>;
+};
+
+&cp0_mdio {
+	status = "okay";
+
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&cp0_ethernet {
+	status = "okay";
+};
+
+&cp0_eth0 {
+	status = "okay";
+	/* Network PHY */
+	phy-mode = "10gbase-kr";
+	/* Generic PHY, providing serdes lanes */
+	phys = <&cp0_comphy2 0>;
+
+	fixed-link {
+		speed = <10000>;
+		full-duplex;
+	};
+};
+
+&cp0_eth1 {
+	status = "okay";
+	/* Network PHY */
+	phy = <&phy0>;
+	phy-mode = "sgmii";
+	/* Generic PHY, providing serdes lanes */
+	phys = <&cp0_comphy0 1>;
+};
+
+&cp0_eth2 {
+	status = "okay";
+	phy = <&phy1>;
+	phy-mode = "rgmii-id";
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-7040.dtsi b/arch/arm64/boot/dts/marvell/armada-7040.dtsi
new file mode 100644
index 000000000..472472157
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-7040.dtsi
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2016 Marvell Technology Group Ltd.
+ *
+ * Device Tree file for the Armada 7040 SoC, made of an AP806 Quad and
+ * one CP110.
+ */
+
+#include "armada-ap806-quad.dtsi"
+#include "armada-70x0.dtsi"
+
+/ {
+	model = "Marvell Armada 7040";
+	compatible = "marvell,armada7040", "marvell,armada-ap806-quad",
+		     "marvell,armada-ap806";
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-70x0.dtsi b/arch/arm64/boot/dts/marvell/armada-70x0.dtsi
new file mode 100644
index 000000000..e5c6d7c25
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-70x0.dtsi
@@ -0,0 +1,64 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2017 Marvell Technology Group Ltd.
+ *
+ * Device Tree file for the Armada 70x0 SoC
+ */
+
+/ {
+	aliases {
+		gpio1 = &cp0_gpio1;
+		gpio2 = &cp0_gpio2;
+		spi1 = &cp0_spi0;
+		spi2 = &cp0_spi1;
+	};
+};
+
+/*
+ * Instantiate the CP110
+ */
+#define CP110_NAME		cp0
+#define CP110_BASE		f2000000
+#define CP110_PCIE_IO_BASE	0xf9000000
+#define CP110_PCIE_MEM_BASE	0xf6000000
+#define CP110_PCIE0_BASE	f2600000
+#define CP110_PCIE1_BASE	f2620000
+#define CP110_PCIE2_BASE	f2640000
+
+#include "armada-cp110.dtsi"
+
+#undef CP110_NAME
+#undef CP110_BASE
+#undef CP110_PCIE_IO_BASE
+#undef CP110_PCIE_MEM_BASE
+#undef CP110_PCIE0_BASE
+#undef CP110_PCIE1_BASE
+#undef CP110_PCIE2_BASE
+
+&cp0_gpio1 {
+	status = "okay";
+};
+
+&cp0_gpio2 {
+	status = "okay";
+};
+
+&cp0_syscon0 {
+	cp0_pinctrl: pinctrl {
+		compatible = "marvell,armada-7k-pinctrl";
+
+		nand_pins: nand-pins {
+			marvell,pins =
+			"mpp15", "mpp16", "mpp17", "mpp18",
+			"mpp19", "mpp20", "mpp21", "mpp22",
+			"mpp23", "mpp24", "mpp25", "mpp26",
+			"mpp27";
+			marvell,function = "dev";
+		};
+
+		nand_rb: nand-rb {
+			marvell,pins = "mpp13";
+			marvell,function = "nf";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-8020.dtsi b/arch/arm64/boot/dts/marvell/armada-8020.dtsi
new file mode 100644
index 000000000..ba1307c0f
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-8020.dtsi
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2016 Marvell Technology Group Ltd.
+ *
+ * Device Tree file for the Armada 8020 SoC, made of an AP806 Dual and
+ * two CP110.
+ */
+
+#include "armada-ap806-dual.dtsi"
+#include "armada-80x0.dtsi"
+
+/ {
+	model = "Marvell Armada 8020";
+	compatible = "marvell,armada8020", "marvell,armada-ap806-dual",
+		     "marvell,armada-ap806";
+};
+
+/* The RTC requires external oscillator. But on Aramda 80x0, the RTC clock
+ * in CP master is not connected (by package) to the oscillator. So
+ * disable it. However, the RTC clock in CP slave is connected to the
+ * oscillator so this one is let enabled.
+ */
+
+&cp0_rtc {
+	status = "disabled";
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-8040-db.dts b/arch/arm64/boot/dts/marvell/armada-8040-db.dts
new file mode 100644
index 000000000..1bac43736
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-8040-db.dts
@@ -0,0 +1,334 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2016 Marvell Technology Group Ltd.
+ *
+ * Device Tree file for Marvell Armada 8040 Development board platform
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include "armada-8040.dtsi"
+
+/ {
+	model = "Marvell Armada 8040 DB board";
+	compatible = "marvell,armada8040-db", "marvell,armada8040",
+		     "marvell,armada-ap806-quad", "marvell,armada-ap806";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+
+	aliases {
+		ethernet0 = &cp0_eth0;
+		ethernet1 = &cp0_eth2;
+		ethernet2 = &cp1_eth0;
+		ethernet3 = &cp1_eth1;
+	};
+
+	cp0_reg_usb3_0_vbus: cp0-usb3-0-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "cp0-usb3h0-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&expander0 0 GPIO_ACTIVE_HIGH>;
+	};
+
+	cp0_reg_usb3_1_vbus: cp0-usb3-1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "cp0-usb3h1-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&expander0 1 GPIO_ACTIVE_HIGH>;
+	};
+
+	cp0_usb3_0_phy: cp0-usb3-0-phy {
+		compatible = "usb-nop-xceiv";
+		vcc-supply = <&cp0_reg_usb3_0_vbus>;
+	};
+
+	cp0_usb3_1_phy: cp0-usb3-1-phy {
+		compatible = "usb-nop-xceiv";
+		vcc-supply = <&cp0_reg_usb3_1_vbus>;
+	};
+
+	cp1_reg_usb3_0_vbus: cp1-usb3-0-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "cp1-usb3h0-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&expander1 0 GPIO_ACTIVE_HIGH>;
+	};
+
+	cp1_usb3_0_phy: cp1-usb3-0-phy {
+		compatible = "usb-nop-xceiv";
+		vcc-supply = <&cp1_reg_usb3_0_vbus>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+	clock-frequency = <100000>;
+};
+
+&spi0 {
+	status = "okay";
+
+	spi-flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <10000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "U-Boot";
+				reg = <0 0x200000>;
+			};
+			partition@400000 {
+				label = "Filesystem";
+				reg = <0x200000 0xce0000>;
+			};
+		};
+	};
+};
+
+/* Accessible over the mini-USB CON9 connector on the main board */
+&uart0 {
+	status = "okay";
+	pinctrl-0 = <&uart0_pins>;
+	pinctrl-names = "default";
+};
+
+/* CON6 on CP0 expansion */
+&cp0_pcie0 {
+	status = "okay";
+};
+
+/* CON5 on CP0 expansion */
+&cp0_pcie2 {
+	status = "okay";
+};
+
+&cp0_i2c0 {
+	status = "okay";
+	clock-frequency = <100000>;
+
+	/* U31 */
+	expander0: pca9555@21 {
+		compatible = "nxp,pca9555";
+		pinctrl-names = "default";
+		gpio-controller;
+		#gpio-cells = <2>;
+		reg = <0x21>;
+	};
+
+	/* U25 */
+	expander1: pca9555@25 {
+		compatible = "nxp,pca9555";
+		pinctrl-names = "default";
+		gpio-controller;
+		#gpio-cells = <2>;
+		reg = <0x25>;
+	};
+
+};
+
+/* CON4 on CP0 expansion */
+&cp0_sata0 {
+	status = "okay";
+};
+
+/* CON9 on CP0 expansion */
+&cp0_usb3_0 {
+	usb-phy = <&cp0_usb3_0_phy>;
+	status = "okay";
+};
+
+/* CON10 on CP0 expansion */
+&cp0_usb3_1 {
+	usb-phy = <&cp0_usb3_1_phy>;
+	status = "okay";
+};
+
+&cp0_mdio {
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&cp0_ethernet {
+	status = "okay";
+};
+
+&cp0_eth0 {
+	status = "okay";
+	phy-mode = "10gbase-kr";
+
+	fixed-link {
+		speed = <10000>;
+		full-duplex;
+	};
+};
+
+&cp0_eth2 {
+	status = "okay";
+	phy = <&phy1>;
+	phy-mode = "rgmii-id";
+};
+
+/* CON6 on CP1 expansion */
+&cp1_pcie0 {
+	status = "okay";
+};
+
+/* CON7 on CP1 expansion */
+&cp1_pcie1 {
+	status = "okay";
+};
+
+/* CON5 on CP1 expansion */
+&cp1_pcie2 {
+	status = "okay";
+};
+
+&cp1_i2c0 {
+	status = "okay";
+	clock-frequency = <100000>;
+};
+
+&cp1_spi1 {
+	status = "okay";
+
+	spi-flash@0 {
+		#address-cells = <0x1>;
+		#size-cells = <0x1>;
+		compatible = "jedec,spi-nor";
+		reg = <0x0>;
+		spi-max-frequency = <20000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "Boot";
+				reg = <0x0 0x200000>;
+			};
+			partition@200000 {
+				label = "Filesystem";
+				reg = <0x200000 0xd00000>;
+			};
+			partition@f00000 {
+				label = "Boot_2nd";
+				reg = <0xf00000 0x100000>;
+			};
+		};
+	};
+};
+
+/*
+ * Proper NAND usage will require DPR-76 to be in position 1-2, which disables
+ * MDIO signal of CP1.
+ */
+&cp1_nand_controller {
+	pinctrl-0 = <&nand_pins>, <&nand_rb>;
+	pinctrl-names = "default";
+
+	nand@0 {
+		reg = <0>;
+		nand-rb = <0>;
+		nand-on-flash-bbt;
+		nand-ecc-strength = <4>;
+		nand-ecc-step-size = <512>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "U-Boot";
+				reg = <0 0x200000>;
+			};
+			partition@200000 {
+				label = "Linux";
+				reg = <0x200000 0xe00000>;
+			};
+			partition@1000000 {
+				label = "Filesystem";
+				reg = <0x1000000 0x3f000000>;
+			};
+		};
+	};
+};
+
+/* CON4 on CP1 expansion */
+&cp1_sata0 {
+	status = "okay";
+};
+
+/* CON9 on CP1 expansion */
+&cp1_usb3_0 {
+	usb-phy = <&cp1_usb3_0_phy>;
+	status = "okay";
+};
+
+/* CON10 on CP1 expansion */
+&cp1_usb3_1 {
+	status = "okay";
+};
+
+&cp1_mdio {
+	status = "okay";
+
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&cp1_ethernet {
+	status = "okay";
+};
+
+&cp1_eth0 {
+	status = "okay";
+	phy-mode = "10gbase-kr";
+
+	fixed-link {
+		speed = <10000>;
+		full-duplex;
+	};
+};
+
+&cp1_eth1 {
+	status = "okay";
+	phy = <&phy0>;
+	phy-mode = "rgmii-id";
+};
+
+&ap_sdhci0 {
+	status = "okay";
+	bus-width = <4>;
+	non-removable;
+};
+
+&cp0_sdhci0 {
+	status = "okay";
+	bus-width = <8>;
+	non-removable;
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts
new file mode 100644
index 000000000..56fa44860
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts
@@ -0,0 +1,370 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2016 Marvell Technology Group Ltd.
+ *
+ * Device Tree file for MACCHIATOBin Armada 8040 community board platform
+ */
+
+#include "armada-8040.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Marvell 8040 MACCHIATOBin";
+	compatible = "marvell,armada8040-mcbin", "marvell,armada8040",
+			"marvell,armada-ap806-quad", "marvell,armada-ap806";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+
+	aliases {
+		ethernet0 = &cp0_eth0;
+		ethernet1 = &cp1_eth0;
+		ethernet2 = &cp1_eth1;
+		ethernet3 = &cp1_eth2;
+	};
+
+	/* Regulator labels correspond with schematics */
+	v_3_3: regulator-3-3v {
+		compatible = "regulator-fixed";
+		regulator-name = "v_3_3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		status = "okay";
+	};
+
+	v_vddo_h: regulator-1-8v {
+		compatible = "regulator-fixed";
+		regulator-name = "v_vddo_h";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		status = "okay";
+	};
+
+	v_5v0_usb3_hst_vbus: regulator-usb3-vbus0 {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&cp0_gpio2 15 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cp0_xhci_vbus_pins>;
+		regulator-name = "v_5v0_usb3_hst_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		status = "okay";
+	};
+
+	usb3h0_phy: usb3_phy0 {
+		compatible = "usb-nop-xceiv";
+		vcc-supply = <&v_5v0_usb3_hst_vbus>;
+	};
+
+	sfp_eth0: sfp-eth0 {
+		/* CON15,16 - CPM lane 4 */
+		compatible = "sff,sfp";
+		i2c-bus = <&sfpp0_i2c>;
+		los-gpio = <&cp1_gpio1 28 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpio = <&cp1_gpio1 27 GPIO_ACTIVE_LOW>;
+		tx-disable-gpio = <&cp1_gpio1 29 GPIO_ACTIVE_HIGH>;
+		tx-fault-gpio  = <&cp1_gpio1 26 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cp1_sfpp0_pins>;
+	};
+
+	sfp_eth1: sfp-eth1 {
+		/* CON17,18 - CPS lane 4 */
+		compatible = "sff,sfp";
+		i2c-bus = <&sfpp1_i2c>;
+		los-gpio = <&cp1_gpio1 8 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpio = <&cp1_gpio1 11 GPIO_ACTIVE_LOW>;
+		tx-disable-gpio = <&cp1_gpio1 10 GPIO_ACTIVE_HIGH>;
+		tx-fault-gpio = <&cp0_gpio2 30 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cp1_sfpp1_pins &cp0_sfpp1_pins>;
+	};
+
+	sfp_eth3: sfp-eth3 {
+		/* CON13,14 - CPS lane 5 */
+		compatible = "sff,sfp";
+		i2c-bus = <&sfp_1g_i2c>;
+		los-gpio = <&cp0_gpio2 22 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpio = <&cp0_gpio2 21 GPIO_ACTIVE_LOW>;
+		tx-disable-gpio = <&cp1_gpio1 24 GPIO_ACTIVE_HIGH>;
+		tx-fault-gpio = <&cp0_gpio2 19 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cp0_sfp_1g_pins &cp1_sfp_1g_pins>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+	pinctrl-0 = <&uart0_pins>;
+	pinctrl-names = "default";
+};
+
+&ap_sdhci0 {
+	bus-width = <8>;
+	/*
+	 * Not stable in HS modes - phy needs "more calibration", so add
+	 * the "slow-mode" and disable SDR104, SDR50 and DDR50 modes.
+	 */
+	marvell,xenon-phy-slow-mode;
+	no-1-8-v;
+	no-sd;
+	no-sdio;
+	non-removable;
+	status = "okay";
+	vqmmc-supply = <&v_vddo_h>;
+};
+
+&cp0_i2c0 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp0_i2c0_pins>;
+	status = "okay";
+};
+
+&cp0_i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp0_i2c1_pins>;
+	status = "okay";
+
+	i2c-switch@70 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+
+		sfpp0_i2c: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+		sfpp1_i2c: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+		sfp_1g_i2c: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+	};
+};
+
+/* J25 UART header */
+&cp0_uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp0_uart1_pins>;
+	status = "okay";
+};
+
+&cp0_mdio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp0_ge_mdio_pins>;
+	status = "okay";
+
+	ge_phy: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&cp0_pcie0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp0_pcie_pins>;
+	num-lanes = <4>;
+	num-viewport = <8>;
+	reset-gpio = <&cp0_gpio1 20 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&cp0_pinctrl {
+	cp0_ge_mdio_pins: ge-mdio-pins {
+		marvell,pins = "mpp32", "mpp34";
+		marvell,function = "ge";
+	};
+	cp0_i2c1_pins: i2c1-pins {
+		marvell,pins = "mpp35", "mpp36";
+		marvell,function = "i2c1";
+	};
+	cp0_i2c0_pins: i2c0-pins {
+		marvell,pins = "mpp37", "mpp38";
+		marvell,function = "i2c0";
+	};
+	cp0_uart1_pins: uart1-pins {
+		marvell,pins = "mpp40", "mpp41";
+		marvell,function = "uart1";
+	};
+	cp0_xhci_vbus_pins: xhci0-vbus-pins {
+		marvell,pins = "mpp47";
+		marvell,function = "gpio";
+	};
+	cp0_sfp_1g_pins: sfp-1g-pins {
+		marvell,pins = "mpp51", "mpp53", "mpp54";
+		marvell,function = "gpio";
+	};
+	cp0_pcie_pins: pcie-pins {
+		marvell,pins = "mpp52";
+		marvell,function = "gpio";
+	};
+	cp0_sdhci_pins: sdhci-pins {
+		marvell,pins = "mpp55", "mpp56", "mpp57", "mpp58", "mpp59",
+			       "mpp60", "mpp61";
+		marvell,function = "sdio";
+	};
+	cp0_sfpp1_pins: sfpp1-pins {
+		marvell,pins = "mpp62";
+		marvell,function = "gpio";
+	};
+};
+
+&cp0_xmdio {
+	status = "okay";
+
+	phy0: ethernet-phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c45";
+		reg = <0>;
+		sfp = <&sfp_eth0>;
+	};
+
+	phy8: ethernet-phy@8 {
+		compatible = "ethernet-phy-ieee802.3-c45";
+		reg = <8>;
+		sfp = <&sfp_eth1>;
+	};
+};
+
+&cp0_ethernet {
+	status = "okay";
+};
+
+&cp0_eth0 {
+	status = "okay";
+	/* Network PHY */
+	phy = <&phy0>;
+	phy-mode = "10gbase-kr";
+	/* Generic PHY, providing serdes lanes */
+	phys = <&cp0_comphy4 0>;
+};
+
+&cp0_sata0 {
+	/* CPM Lane 0 - U29 */
+	status = "okay";
+};
+
+&cp0_sdhci0 {
+	/* U6 */
+	broken-cd;
+	bus-width = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp0_sdhci_pins>;
+	status = "okay";
+	vqmmc-supply = <&v_3_3>;
+};
+
+&cp0_usb3_0 {
+	/* J38? - USB2.0 only */
+	status = "okay";
+};
+
+&cp0_usb3_1 {
+	/* J38? - USB2.0 only */
+	status = "okay";
+};
+
+&cp1_ethernet {
+	status = "okay";
+};
+
+&cp1_eth0 {
+	status = "okay";
+	/* Network PHY */
+	phy = <&phy8>;
+	phy-mode = "10gbase-kr";
+	/* Generic PHY, providing serdes lanes */
+	phys = <&cp1_comphy4 0>;
+};
+
+&cp1_eth1 {
+	/* CPS Lane 0 - J5 (Gigabit RJ45) */
+	status = "okay";
+	/* Network PHY */
+	phy = <&ge_phy>;
+	phy-mode = "sgmii";
+	/* Generic PHY, providing serdes lanes */
+	phys = <&cp1_comphy0 1>;
+};
+
+&cp1_eth2 {
+	/* CPS Lane 5 */
+	status = "okay";
+	/* Network PHY */
+	phy-mode = "2500base-x";
+	managed = "in-band-status";
+	/* Generic PHY, providing serdes lanes */
+	phys = <&cp1_comphy5 2>;
+	sfp = <&sfp_eth3>;
+};
+
+&cp1_pinctrl {
+	cp1_sfpp1_pins: sfpp1-pins {
+		marvell,pins = "mpp8", "mpp10", "mpp11";
+		marvell,function = "gpio";
+	};
+	cp1_spi1_pins: spi1-pins {
+		marvell,pins = "mpp12", "mpp13", "mpp14", "mpp15", "mpp16";
+		marvell,function = "spi1";
+	};
+	cp1_uart0_pins: uart0-pins {
+		marvell,pins = "mpp6", "mpp7";
+		marvell,function = "uart0";
+	};
+	cp1_sfp_1g_pins: sfp-1g-pins {
+		marvell,pins = "mpp24";
+		marvell,function = "gpio";
+	};
+	cp1_sfpp0_pins: sfpp0-pins {
+		marvell,pins = "mpp26", "mpp27", "mpp28", "mpp29";
+		marvell,function = "gpio";
+	};
+};
+
+/* J27 UART header */
+&cp1_uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp1_uart0_pins>;
+	status = "okay";
+};
+
+&cp1_sata0 {
+	/* CPS Lane 1 - U32 */
+	/* CPS Lane 3 - U31 */
+	status = "okay";
+};
+
+&cp1_spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp1_spi1_pins>;
+	status = "okay";
+
+	spi-flash@0 {
+		compatible = "st,w25q32";
+		spi-max-frequency = <50000000>;
+		reg = <0>;
+	};
+};
+
+&cp1_usb3_0 {
+	/* CPS Lane 2 - CON7 */
+	usb-phy = <&usb3h0_phy>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-8040.dtsi b/arch/arm64/boot/dts/marvell/armada-8040.dtsi
new file mode 100644
index 000000000..7699b1922
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-8040.dtsi
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2016 Marvell Technology Group Ltd.
+ *
+ * Device Tree file for the Armada 8040 SoC, made of an AP806 Quad and
+ * two CP110.
+ */
+
+#include "armada-ap806-quad.dtsi"
+#include "armada-80x0.dtsi"
+
+/ {
+	model = "Marvell Armada 8040";
+	compatible = "marvell,armada8040", "marvell,armada-ap806-quad",
+		     "marvell,armada-ap806";
+};
+
+/* The RTC requires external oscillator. But on Aramda 80x0, the RTC clock
+ * in CP master is not connected (by package) to the oscillator. So
+ * disable it. However, the RTC clock in CP slave is connected to the
+ * oscillator so this one is let enabled.
+ */
+&cp0_rtc {
+	status = "disabled";
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-8080-db.dts b/arch/arm64/boot/dts/marvell/armada-8080-db.dts
new file mode 100644
index 000000000..4ba158f41
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-8080-db.dts
@@ -0,0 +1,28 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2017 Marvell Technology Group Ltd.
+ *
+ * Device Tree file for Marvell Armada-8080 Development board platform
+ */
+
+#include "armada-8080.dtsi"
+
+/ {
+	model = "Marvell 8080 board";
+	compatible = "marvell,armada-8080-db", "marvell,armada-8080",
+		     "marvell,armada-ap810-octa", "marvell,armada-ap810";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+};
+
+&uart0_ap0 {
+	clock-frequency = <384000>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-8080.dtsi b/arch/arm64/boot/dts/marvell/armada-8080.dtsi
new file mode 100644
index 000000000..299e814d1
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-8080.dtsi
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2017 Marvell Technology Group Ltd.
+ *
+ * Device Tree file for Marvell Armada-8080 SoC, made of an AP810 OCTA.
+ */
+
+#include "armada-ap810-ap0-octa-core.dtsi"
+
+/ {
+	model = "Marvell 8080 board";
+	compatible = "marvell,armada-8080", "marvell,armada-ap810-octa",
+				"marvell,armada-ap810";
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-80x0.dtsi b/arch/arm64/boot/dts/marvell/armada-80x0.dtsi
new file mode 100644
index 000000000..8129b40f1
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-80x0.dtsi
@@ -0,0 +1,108 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2017 Marvell Technology Group Ltd.
+ *
+ * Device Tree file for the Armada 80x0 SoC family
+ */
+
+/ {
+	aliases {
+		gpio1 = &cp1_gpio1;
+		gpio2 = &cp0_gpio2;
+		spi1 = &cp0_spi0;
+		spi2 = &cp0_spi1;
+		spi3 = &cp1_spi0;
+		spi4 = &cp1_spi1;
+	};
+};
+
+/*
+ * Instantiate the master CP110
+ */
+#define CP110_NAME		cp0
+#define CP110_BASE		f2000000
+#define CP110_PCIE_IO_BASE	0xf9000000
+#define CP110_PCIE_MEM_BASE	0xf6000000
+#define CP110_PCIE0_BASE	f2600000
+#define CP110_PCIE1_BASE	f2620000
+#define CP110_PCIE2_BASE	f2640000
+
+#include "armada-cp110.dtsi"
+
+#undef CP110_NAME
+#undef CP110_BASE
+#undef CP110_PCIE_IO_BASE
+#undef CP110_PCIE_MEM_BASE
+#undef CP110_PCIE0_BASE
+#undef CP110_PCIE1_BASE
+#undef CP110_PCIE2_BASE
+
+/*
+ * Instantiate the slave CP110
+ */
+#define CP110_NAME		cp1
+#define CP110_BASE		f4000000
+#define CP110_PCIE_IO_BASE	0xfd000000
+#define CP110_PCIE_MEM_BASE	0xfa000000
+#define CP110_PCIE0_BASE	f4600000
+#define CP110_PCIE1_BASE	f4620000
+#define CP110_PCIE2_BASE	f4640000
+
+#include "armada-cp110.dtsi"
+
+#undef CP110_NAME
+#undef CP110_BASE
+#undef CP110_PCIE_IO_BASE
+#undef CP110_PCIE_MEM_BASE
+#undef CP110_PCIE0_BASE
+#undef CP110_PCIE1_BASE
+#undef CP110_PCIE2_BASE
+
+/* The 80x0 has two CP blocks, but uses only one block from each. */
+&cp1_gpio1 {
+	status = "okay";
+};
+
+&cp0_gpio2 {
+	status = "okay";
+};
+
+&cp0_syscon0 {
+	cp0_pinctrl: pinctrl {
+		compatible = "marvell,armada-8k-cpm-pinctrl";
+	};
+};
+
+&cp1_syscon0 {
+	cp1_pinctrl: pinctrl {
+		compatible = "marvell,armada-8k-cps-pinctrl";
+
+		nand_pins: nand-pins {
+			marvell,pins =
+			"mpp0", "mpp1", "mpp2", "mpp3",
+			"mpp4", "mpp5", "mpp6", "mpp7",
+			"mpp8", "mpp9", "mpp10", "mpp11",
+			"mpp15", "mpp16", "mpp17", "mpp18",
+			"mpp19", "mpp20", "mpp21", "mpp22",
+			"mpp23", "mpp24", "mpp25", "mpp26",
+			"mpp27";
+			marvell,function = "dev";
+		};
+
+		nand_rb: nand-rb {
+			marvell,pins = "mpp13", "mpp12";
+			marvell,function = "nf";
+		};
+	};
+};
+
+&cp1_crypto {
+	/*
+	 * The cryptographic engine found on the cp110
+	 * master is enabled by default at the SoC
+	 * level. Because it is not possible as of now
+	 * to enable two cryptographic engines in
+	 * parallel, disable this one by default.
+	 */
+	status = "disabled";
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-ap806-dual.dtsi b/arch/arm64/boot/dts/marvell/armada-ap806-dual.dtsi
new file mode 100644
index 000000000..64b5e61a6
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-ap806-dual.dtsi
@@ -0,0 +1,31 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2016 Marvell Technology Group Ltd.
+ *
+ * Device Tree file for Marvell Armada AP806.
+ */
+
+#include "armada-ap806.dtsi"
+
+/ {
+	model = "Marvell Armada AP806 Dual";
+	compatible = "marvell,armada-ap806-dual", "marvell,armada-ap806";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72", "arm,armv8";
+			reg = <0x000>;
+			enable-method = "psci";
+		};
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72", "arm,armv8";
+			reg = <0x001>;
+			enable-method = "psci";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-ap806-quad.dtsi b/arch/arm64/boot/dts/marvell/armada-ap806-quad.dtsi
new file mode 100644
index 000000000..746e79276
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-ap806-quad.dtsi
@@ -0,0 +1,43 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2016 Marvell Technology Group Ltd.
+ *
+ * Device Tree file for Marvell Armada AP806.
+ */
+
+#include "armada-ap806.dtsi"
+
+/ {
+	model = "Marvell Armada AP806 Quad";
+	compatible = "marvell,armada-ap806-quad", "marvell,armada-ap806";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72", "arm,armv8";
+			reg = <0x000>;
+			enable-method = "psci";
+		};
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72", "arm,armv8";
+			reg = <0x001>;
+			enable-method = "psci";
+		};
+		cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72", "arm,armv8";
+			reg = <0x100>;
+			enable-method = "psci";
+		};
+		cpu@101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72", "arm,armv8";
+			reg = <0x101>;
+			enable-method = "psci";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
new file mode 100644
index 000000000..ec0da5b3d
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
@@ -0,0 +1,274 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2016 Marvell Technology Group Ltd.
+ *
+ * Device Tree file for Marvell Armada AP806.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/dts-v1/;
+
+/ {
+	model = "Marvell Armada AP806";
+	compatible = "marvell,armada-ap806";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+		gpio0 = &ap_gpio;
+		spi0 = &spi0;
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/*
+		 * This area matches the mapping done with a
+		 * mainline U-Boot, and should be updated by the
+		 * bootloader.
+		 */
+
+		psci-area@4000000 {
+			reg = <0x0 0x4000000 0x0 0x200000>;
+			no-map;
+		};
+	};
+
+	ap806 {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+		ranges;
+
+		config-space@f0000000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "simple-bus";
+			ranges = <0x0 0x0 0xf0000000 0x1000000>;
+
+			gic: interrupt-controller@210000 {
+				compatible = "arm,gic-400";
+				#interrupt-cells = <3>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges;
+				interrupt-controller;
+				interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+				reg = <0x210000 0x10000>,
+				      <0x220000 0x20000>,
+				      <0x240000 0x20000>,
+				      <0x260000 0x20000>;
+
+				gic_v2m0: v2m@280000 {
+					compatible = "arm,gic-v2m-frame";
+					msi-controller;
+					reg = <0x280000 0x1000>;
+					arm,msi-base-spi = <160>;
+					arm,msi-num-spis = <32>;
+				};
+				gic_v2m1: v2m@290000 {
+					compatible = "arm,gic-v2m-frame";
+					msi-controller;
+					reg = <0x290000 0x1000>;
+					arm,msi-base-spi = <192>;
+					arm,msi-num-spis = <32>;
+				};
+				gic_v2m2: v2m@2a0000 {
+					compatible = "arm,gic-v2m-frame";
+					msi-controller;
+					reg = <0x2a0000 0x1000>;
+					arm,msi-base-spi = <224>;
+					arm,msi-num-spis = <32>;
+				};
+				gic_v2m3: v2m@2b0000 {
+					compatible = "arm,gic-v2m-frame";
+					msi-controller;
+					reg = <0x2b0000 0x1000>;
+					arm,msi-base-spi = <256>;
+					arm,msi-num-spis = <32>;
+				};
+			};
+
+			timer {
+				compatible = "arm,armv8-timer";
+				interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+					     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+					     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+					     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+			};
+
+			pmu {
+				compatible = "arm,cortex-a72-pmu";
+				interrupt-parent = <&pic>;
+				interrupts = <17>;
+			};
+
+			odmi: odmi@300000 {
+				compatible = "marvell,odmi-controller";
+				interrupt-controller;
+				msi-controller;
+				marvell,odmi-frames = <4>;
+				reg = <0x300000 0x4000>,
+				      <0x304000 0x4000>,
+				      <0x308000 0x4000>,
+				      <0x30C000 0x4000>;
+				marvell,spi-base = <128>, <136>, <144>, <152>;
+			};
+
+			gicp: gicp@3f0040 {
+				compatible = "marvell,ap806-gicp";
+				reg = <0x3f0040 0x10>;
+				marvell,spi-ranges = <64 64>, <288 64>;
+				msi-controller;
+			};
+
+			pic: interrupt-controller@3f0100 {
+				compatible = "marvell,armada-8k-pic";
+				reg = <0x3f0100 0x10>;
+				#interrupt-cells = <1>;
+				interrupt-controller;
+				interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			xor@400000 {
+				compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
+				reg = <0x400000 0x1000>,
+				      <0x410000 0x1000>;
+				msi-parent = <&gic_v2m0>;
+				clocks = <&ap_clk 3>;
+				dma-coherent;
+			};
+
+			xor@420000 {
+				compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
+				reg = <0x420000 0x1000>,
+				      <0x430000 0x1000>;
+				msi-parent = <&gic_v2m0>;
+				clocks = <&ap_clk 3>;
+				dma-coherent;
+			};
+
+			xor@440000 {
+				compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
+				reg = <0x440000 0x1000>,
+				      <0x450000 0x1000>;
+				msi-parent = <&gic_v2m0>;
+				clocks = <&ap_clk 3>;
+				dma-coherent;
+			};
+
+			xor@460000 {
+				compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
+				reg = <0x460000 0x1000>,
+				      <0x470000 0x1000>;
+				msi-parent = <&gic_v2m0>;
+				clocks = <&ap_clk 3>;
+				dma-coherent;
+			};
+
+			spi0: spi@510600 {
+				compatible = "marvell,armada-380-spi";
+				reg = <0x510600 0x50>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&ap_clk 3>;
+				status = "disabled";
+			};
+
+			i2c0: i2c@511000 {
+				compatible = "marvell,mv78230-i2c";
+				reg = <0x511000 0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+				timeout-ms = <1000>;
+				clocks = <&ap_clk 3>;
+				status = "disabled";
+			};
+
+			uart0: serial@512000 {
+				compatible = "snps,dw-apb-uart";
+				reg = <0x512000 0x100>;
+				reg-shift = <2>;
+				interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+				reg-io-width = <1>;
+				clocks = <&ap_clk 3>;
+				status = "disabled";
+			};
+
+			uart1: serial@512100 {
+				compatible = "snps,dw-apb-uart";
+				reg = <0x512100 0x100>;
+				reg-shift = <2>;
+				interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+				reg-io-width = <1>;
+				clocks = <&ap_clk 3>;
+				status = "disabled";
+
+			};
+
+			watchdog: watchdog@610000 {
+				compatible = "arm,sbsa-gwdt";
+				reg = <0x610000 0x1000>, <0x600000 0x1000>;
+				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			ap_sdhci0: sdhci@6e0000 {
+				compatible = "marvell,armada-ap806-sdhci";
+				reg = <0x6e0000 0x300>;
+				interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+				clock-names = "core";
+				clocks = <&ap_clk 4>;
+				dma-coherent;
+				marvell,xenon-phy-slow-mode;
+				status = "disabled";
+			};
+
+			ap_syscon: system-controller@6f4000 {
+				compatible = "syscon", "simple-mfd";
+				reg = <0x6f4000 0x2000>;
+
+				ap_clk: clock {
+					compatible = "marvell,ap806-clock";
+					#clock-cells = <1>;
+				};
+
+				ap_pinctrl: pinctrl {
+					compatible = "marvell,ap806-pinctrl";
+
+					uart0_pins: uart0-pins {
+						marvell,pins = "mpp11", "mpp19";
+						marvell,function = "uart0";
+					};
+				};
+
+				ap_gpio: gpio@1040 {
+					compatible = "marvell,armada-8k-gpio";
+					offset = <0x1040>;
+					ngpios = <20>;
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-ranges = <&ap_pinctrl 0 0 20>;
+				};
+			};
+
+			ap_thermal: thermal@6f808c {
+				compatible = "marvell,armada-ap806-thermal";
+				reg = <0x6f808c 0x4>,
+				      <0x6f8084 0x8>;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-ap810-ap0-octa-core.dtsi b/arch/arm64/boot/dts/marvell/armada-ap810-ap0-octa-core.dtsi
new file mode 100644
index 000000000..7d00ae78f
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-ap810-ap0-octa-core.dtsi
@@ -0,0 +1,65 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2017 Marvell Technology Group Ltd.
+ *
+ * Device Tree file for Marvell Armada AP810 OCTA cores.
+ */
+
+#include "armada-ap810-ap0.dtsi"
+
+/ {
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "marvell,armada-ap810-octa";
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72", "arm,armv8";
+			reg = <0x000>;
+			enable-method = "psci";
+		};
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72", "arm,armv8";
+			reg = <0x001>;
+			enable-method = "psci";
+		};
+		cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72", "arm,armv8";
+			reg = <0x100>;
+			enable-method = "psci";
+		};
+		cpu@101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72", "arm,armv8";
+			reg = <0x101>;
+			enable-method = "psci";
+		};
+		cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72", "arm,armv8";
+			reg = <0x200>;
+			enable-method = "psci";
+		};
+		cpu@201 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72", "arm,armv8";
+			reg = <0x201>;
+			enable-method = "psci";
+		};
+		cpu@300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72", "arm,armv8";
+			reg = <0x300>;
+			enable-method = "psci";
+		};
+		cpu@301 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72", "arm,armv8";
+			reg = <0x301>;
+			enable-method = "psci";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-ap810-ap0.dtsi b/arch/arm64/boot/dts/marvell/armada-ap810-ap0.dtsi
new file mode 100644
index 000000000..8107d120a
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-ap810-ap0.dtsi
@@ -0,0 +1,124 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2017 Marvell Technology Group Ltd.
+ *
+ * Device Tree file for Marvell Armada AP810.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/dts-v1/;
+
+/ {
+	model = "Marvell Armada AP810";
+	compatible = "marvell,armada-ap810";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		serial0 = &uart0_ap0;
+		serial1 = &uart1_ap0;
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	ap810-ap0 {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+		ranges;
+
+		config-space@e8000000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "simple-bus";
+			ranges = <0x0 0x0 0xe8000000 0x4000000>;
+			interrupt-parent = <&gic>;
+
+			gic: interrupt-controller@3000000 {
+				compatible = "arm,gic-v3";
+				#interrupt-cells = <3>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				interrupt-controller;
+				interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+				ranges;
+
+				reg = <0x3000000 0x10000>,	/* GICD */
+				      <0x3060000 0x100000>,	/* GICR */
+				      <0x00c0000 0x2000>,	/* GICC */
+				      <0x00d0000 0x1000>,	/* GICH */
+				      <0x00e0000 0x2000>;	/* GICV */
+
+				gic_its_ap0: interrupt-controller@3040000 {
+					compatible = "arm,gic-v3-its";
+					msi-controller;
+					#msi-cells = <1>;
+					reg = <0x3040000 0x20000>;
+				};
+			};
+
+			timer {
+				compatible = "arm,armv8-timer";
+				interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+					     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+					     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+					     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+			};
+
+			xor@400000 {
+				compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
+				reg = <0x400000 0x1000>,
+				      <0x410000 0x1000>;
+				msi-parent = <&gic_its_ap0 0xa0>;
+				dma-coherent;
+			};
+
+			xor@420000 {
+				compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
+				reg = <0x420000 0x1000>,
+				      <0x430000 0x1000>;
+				msi-parent = <&gic_its_ap0 0xa1>;
+				dma-coherent;
+			};
+
+			xor@440000 {
+				compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
+				reg = <0x440000 0x1000>,
+				      <0x450000 0x1000>;
+				msi-parent = <&gic_its_ap0 0xa2>;
+				dma-coherent;
+			};
+
+			xor@460000 {
+				compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
+				reg = <0x460000 0x1000>,
+				      <0x470000 0x1000>;
+				msi-parent = <&gic_its_ap0 0xa3>;
+				dma-coherent;
+			};
+
+			uart0_ap0: serial@512000 {
+				compatible = "snps,dw-apb-uart";
+				reg = <0x512000 0x100>;
+				reg-shift = <2>;
+				interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+				reg-io-width = <1>;
+				status = "disabled";
+			};
+
+			uart1_ap0: serial@512100 {
+				compatible = "snps,dw-apb-uart";
+				reg = <0x512100 0x100>;
+				reg-shift = <2>;
+				interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+				reg-io-width = <1>;
+				status = "disabled";
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-common.dtsi b/arch/arm64/boot/dts/marvell/armada-common.dtsi
new file mode 100644
index 000000000..d5e8aedec
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-common.dtsi
@@ -0,0 +1,10 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2016 Marvell Technology Group Ltd.
+ */
+
+/* Common definitions used by Armada 7K/8K DTs */
+#define PASTER(x, y) x ## y
+#define EVALUATOR(x, y) PASTER(x, y)
+#define CP110_LABEL(name) EVALUATOR(CP110_NAME, EVALUATOR(_, name))
+#define ADDRESSIFY(addr) EVALUATOR(0x, addr)
diff --git a/arch/arm64/boot/dts/marvell/armada-cp110.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110.dtsi
new file mode 100644
index 000000000..571bede7b
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-cp110.dtsi
@@ -0,0 +1,500 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2016 Marvell Technology Group Ltd.
+ *
+ * Device Tree file for Marvell Armada CP110.
+ */
+
+#include <dt-bindings/interrupt-controller/mvebu-icu.h>
+
+#include "armada-common.dtsi"
+
+#define CP110_PCIEx_IO_BASE(iface)	(CP110_PCIE_IO_BASE + (iface *  0x10000))
+#define CP110_PCIEx_MEM_BASE(iface)	(CP110_PCIE_MEM_BASE + (iface *  0x1000000))
+#define CP110_PCIEx_CONF_BASE(iface)	(CP110_PCIEx_MEM_BASE(iface) + 0xf00000)
+
+/ {
+	/*
+	 * The contents of the node are defined below, in order to
+	 * save one indentation level
+	 */
+	CP110_NAME: CP110_NAME { };
+};
+
+&CP110_NAME {
+	#address-cells = <2>;
+	#size-cells = <2>;
+	compatible = "simple-bus";
+	interrupt-parent = <&CP110_LABEL(icu)>;
+	ranges;
+
+	config-space@CP110_BASE {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		ranges = <0x0 0x0 ADDRESSIFY(CP110_BASE) 0x2000000>;
+
+		CP110_LABEL(ethernet): ethernet@0 {
+			compatible = "marvell,armada-7k-pp22";
+			reg = <0x0 0x100000>, <0x129000 0xb000>;
+			clocks = <&CP110_LABEL(clk) 1 3>, <&CP110_LABEL(clk) 1 9>,
+				 <&CP110_LABEL(clk) 1 5>, <&CP110_LABEL(clk) 1 6>,
+				 <&CP110_LABEL(clk) 1 18>;
+			clock-names = "pp_clk", "gop_clk",
+				      "mg_clk", "mg_core_clk", "axi_clk";
+			marvell,system-controller = <&CP110_LABEL(syscon0)>;
+			status = "disabled";
+			dma-coherent;
+
+			CP110_LABEL(eth0): eth0 {
+				interrupts = <ICU_GRP_NSR 39 IRQ_TYPE_LEVEL_HIGH>,
+					<ICU_GRP_NSR 43 IRQ_TYPE_LEVEL_HIGH>,
+					<ICU_GRP_NSR 47 IRQ_TYPE_LEVEL_HIGH>,
+					<ICU_GRP_NSR 51 IRQ_TYPE_LEVEL_HIGH>,
+					<ICU_GRP_NSR 55 IRQ_TYPE_LEVEL_HIGH>,
+					<ICU_GRP_NSR 129 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "tx-cpu0", "tx-cpu1", "tx-cpu2",
+					"tx-cpu3", "rx-shared", "link";
+				port-id = <0>;
+				gop-port-id = <0>;
+				status = "disabled";
+			};
+
+			CP110_LABEL(eth1): eth1 {
+				interrupts = <ICU_GRP_NSR 40 IRQ_TYPE_LEVEL_HIGH>,
+					<ICU_GRP_NSR 44 IRQ_TYPE_LEVEL_HIGH>,
+					<ICU_GRP_NSR 48 IRQ_TYPE_LEVEL_HIGH>,
+					<ICU_GRP_NSR 52 IRQ_TYPE_LEVEL_HIGH>,
+					<ICU_GRP_NSR 56 IRQ_TYPE_LEVEL_HIGH>,
+					<ICU_GRP_NSR 128 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "tx-cpu0", "tx-cpu1", "tx-cpu2",
+					"tx-cpu3", "rx-shared", "link";
+				port-id = <1>;
+				gop-port-id = <2>;
+				status = "disabled";
+			};
+
+			CP110_LABEL(eth2): eth2 {
+				interrupts = <ICU_GRP_NSR 41 IRQ_TYPE_LEVEL_HIGH>,
+					<ICU_GRP_NSR 45 IRQ_TYPE_LEVEL_HIGH>,
+					<ICU_GRP_NSR 49 IRQ_TYPE_LEVEL_HIGH>,
+					<ICU_GRP_NSR 53 IRQ_TYPE_LEVEL_HIGH>,
+					<ICU_GRP_NSR 57 IRQ_TYPE_LEVEL_HIGH>,
+					<ICU_GRP_NSR 127 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "tx-cpu0", "tx-cpu1", "tx-cpu2",
+					"tx-cpu3", "rx-shared", "link";
+				port-id = <2>;
+				gop-port-id = <3>;
+				status = "disabled";
+			};
+		};
+
+		CP110_LABEL(comphy): phy@120000 {
+			compatible = "marvell,comphy-cp110";
+			reg = <0x120000 0x6000>;
+			marvell,system-controller = <&CP110_LABEL(syscon0)>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			CP110_LABEL(comphy0): phy@0 {
+				reg = <0>;
+				#phy-cells = <1>;
+			};
+
+			CP110_LABEL(comphy1): phy@1 {
+				reg = <1>;
+				#phy-cells = <1>;
+			};
+
+			CP110_LABEL(comphy2): phy@2 {
+				reg = <2>;
+				#phy-cells = <1>;
+			};
+
+			CP110_LABEL(comphy3): phy@3 {
+				reg = <3>;
+				#phy-cells = <1>;
+			};
+
+			CP110_LABEL(comphy4): phy@4 {
+				reg = <4>;
+				#phy-cells = <1>;
+			};
+
+			CP110_LABEL(comphy5): phy@5 {
+				reg = <5>;
+				#phy-cells = <1>;
+			};
+		};
+
+		CP110_LABEL(mdio): mdio@12a200 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "marvell,orion-mdio";
+			reg = <0x12a200 0x10>;
+			clocks = <&CP110_LABEL(clk) 1 9>, <&CP110_LABEL(clk) 1 5>,
+				 <&CP110_LABEL(clk) 1 6>, <&CP110_LABEL(clk) 1 18>;
+			status = "disabled";
+		};
+
+		CP110_LABEL(xmdio): mdio@12a600 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "marvell,xmdio";
+			reg = <0x12a600 0x10>;
+			clocks = <&CP110_LABEL(clk) 1 5>,
+				 <&CP110_LABEL(clk) 1 6>, <&CP110_LABEL(clk) 1 18>;
+			status = "disabled";
+		};
+
+		CP110_LABEL(icu): interrupt-controller@1e0000 {
+			compatible = "marvell,cp110-icu";
+			reg = <0x1e0000 0x440>;
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			msi-parent = <&gicp>;
+		};
+
+		CP110_LABEL(rtc): rtc@284000 {
+			compatible = "marvell,armada-8k-rtc";
+			reg = <0x284000 0x20>, <0x284080 0x24>;
+			reg-names = "rtc", "rtc-soc";
+			interrupts = <ICU_GRP_NSR 77 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		CP110_LABEL(thermal): thermal@400078 {
+			compatible = "marvell,armada-cp110-thermal";
+			reg = <0x400078 0x4>,
+			<0x400070 0x8>;
+		};
+
+		CP110_LABEL(syscon0): system-controller@440000 {
+			compatible = "syscon", "simple-mfd";
+			reg = <0x440000 0x2000>;
+
+			CP110_LABEL(clk): clock {
+				compatible = "marvell,cp110-clock";
+				#clock-cells = <2>;
+			};
+
+			CP110_LABEL(gpio1): gpio@100 {
+				compatible = "marvell,armada-8k-gpio";
+				offset = <0x100>;
+				ngpios = <32>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				gpio-ranges = <&CP110_LABEL(pinctrl) 0 0 32>;
+				interrupt-controller;
+				interrupts = <ICU_GRP_NSR 86 IRQ_TYPE_LEVEL_HIGH>,
+					<ICU_GRP_NSR 85 IRQ_TYPE_LEVEL_HIGH>,
+					<ICU_GRP_NSR 84 IRQ_TYPE_LEVEL_HIGH>,
+					<ICU_GRP_NSR 83 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			CP110_LABEL(gpio2): gpio@140 {
+				compatible = "marvell,armada-8k-gpio";
+				offset = <0x140>;
+				ngpios = <31>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				gpio-ranges = <&CP110_LABEL(pinctrl) 0 32 31>;
+				interrupt-controller;
+				interrupts = <ICU_GRP_NSR 82 IRQ_TYPE_LEVEL_HIGH>,
+					<ICU_GRP_NSR 81 IRQ_TYPE_LEVEL_HIGH>,
+					<ICU_GRP_NSR 80 IRQ_TYPE_LEVEL_HIGH>,
+					<ICU_GRP_NSR 79 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+		};
+
+		CP110_LABEL(usb3_0): usb3@500000 {
+			compatible = "marvell,armada-8k-xhci",
+			"generic-xhci";
+			reg = <0x500000 0x4000>;
+			dma-coherent;
+			interrupts = <ICU_GRP_NSR 106 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "core", "reg";
+			clocks = <&CP110_LABEL(clk) 1 22>,
+				 <&CP110_LABEL(clk) 1 16>;
+			status = "disabled";
+		};
+
+		CP110_LABEL(usb3_1): usb3@510000 {
+			compatible = "marvell,armada-8k-xhci",
+			"generic-xhci";
+			reg = <0x510000 0x4000>;
+			dma-coherent;
+			interrupts = <ICU_GRP_NSR 105 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "core", "reg";
+			clocks = <&CP110_LABEL(clk) 1 23>,
+				 <&CP110_LABEL(clk) 1 16>;
+			status = "disabled";
+		};
+
+		CP110_LABEL(sata0): sata@540000 {
+			compatible = "marvell,armada-8k-ahci",
+			"generic-ahci";
+			reg = <0x540000 0x30000>;
+			dma-coherent;
+			interrupts = <ICU_GRP_NSR 107 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&CP110_LABEL(clk) 1 15>,
+				 <&CP110_LABEL(clk) 1 16>;
+			status = "disabled";
+		};
+
+		CP110_LABEL(xor0): xor@6a0000 {
+			compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
+			reg = <0x6a0000 0x1000>, <0x6b0000 0x1000>;
+			dma-coherent;
+			msi-parent = <&gic_v2m0>;
+			clock-names = "core", "reg";
+			clocks = <&CP110_LABEL(clk) 1 8>,
+				 <&CP110_LABEL(clk) 1 14>;
+		};
+
+		CP110_LABEL(xor1): xor@6c0000 {
+			compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
+			reg = <0x6c0000 0x1000>, <0x6d0000 0x1000>;
+			dma-coherent;
+			msi-parent = <&gic_v2m0>;
+			clock-names = "core", "reg";
+			clocks = <&CP110_LABEL(clk) 1 7>,
+				 <&CP110_LABEL(clk) 1 14>;
+		};
+
+		CP110_LABEL(spi0): spi@700600 {
+			compatible = "marvell,armada-380-spi";
+			reg = <0x700600 0x50>;
+			#address-cells = <0x1>;
+			#size-cells = <0x0>;
+			clock-names = "core", "axi";
+			clocks = <&CP110_LABEL(clk) 1 21>,
+				 <&CP110_LABEL(clk) 1 17>;
+			status = "disabled";
+		};
+
+		CP110_LABEL(spi1): spi@700680 {
+			compatible = "marvell,armada-380-spi";
+			reg = <0x700680 0x50>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clock-names = "core", "axi";
+			clocks = <&CP110_LABEL(clk) 1 21>,
+				 <&CP110_LABEL(clk) 1 17>;
+			status = "disabled";
+		};
+
+		CP110_LABEL(i2c0): i2c@701000 {
+			compatible = "marvell,mv78230-i2c";
+			reg = <0x701000 0x20>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <ICU_GRP_NSR 120 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "core", "reg";
+			clocks = <&CP110_LABEL(clk) 1 21>,
+				 <&CP110_LABEL(clk) 1 17>;
+			status = "disabled";
+		};
+
+		CP110_LABEL(i2c1): i2c@701100 {
+			compatible = "marvell,mv78230-i2c";
+			reg = <0x701100 0x20>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <ICU_GRP_NSR 121 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "core", "reg";
+			clocks = <&CP110_LABEL(clk) 1 21>,
+				 <&CP110_LABEL(clk) 1 17>;
+			status = "disabled";
+		};
+
+		CP110_LABEL(uart0): serial@702000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x702000 0x100>;
+			reg-shift = <2>;
+			interrupts = <ICU_GRP_NSR 122 IRQ_TYPE_LEVEL_HIGH>;
+			reg-io-width = <1>;
+			clock-names = "baudclk", "apb_pclk";
+			clocks = <&CP110_LABEL(clk) 1 21>,
+				 <&CP110_LABEL(clk) 1 17>;
+			status = "disabled";
+		};
+
+		CP110_LABEL(uart1): serial@702100 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x702100 0x100>;
+			reg-shift = <2>;
+			interrupts = <ICU_GRP_NSR 123 IRQ_TYPE_LEVEL_HIGH>;
+			reg-io-width = <1>;
+			clock-names = "baudclk", "apb_pclk";
+			clocks = <&CP110_LABEL(clk) 1 21>,
+				 <&CP110_LABEL(clk) 1 17>;
+			status = "disabled";
+		};
+
+		CP110_LABEL(uart2): serial@702200 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x702200 0x100>;
+			reg-shift = <2>;
+			interrupts = <ICU_GRP_NSR 124 IRQ_TYPE_LEVEL_HIGH>;
+			reg-io-width = <1>;
+			clock-names = "baudclk", "apb_pclk";
+			clocks = <&CP110_LABEL(clk) 1 21>,
+				 <&CP110_LABEL(clk) 1 17>;
+			status = "disabled";
+		};
+
+		CP110_LABEL(uart3): serial@702300 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x702300 0x100>;
+			reg-shift = <2>;
+			interrupts = <ICU_GRP_NSR 125 IRQ_TYPE_LEVEL_HIGH>;
+			reg-io-width = <1>;
+			clock-names = "baudclk", "apb_pclk";
+			clocks = <&CP110_LABEL(clk) 1 21>,
+				 <&CP110_LABEL(clk) 1 17>;
+			status = "disabled";
+		};
+
+		CP110_LABEL(nand_controller): nand@720000 {
+			/*
+			 * Due to the limitation of the pins available
+			 * this controller is only usable on the CPM
+			 * for A7K and on the CPS for A8K.
+			 */
+			compatible = "marvell,armada-8k-nand-controller",
+				"marvell,armada370-nand-controller";
+			reg = <0x720000 0x54>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <ICU_GRP_NSR 115 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "core", "reg";
+			clocks = <&CP110_LABEL(clk) 1 2>,
+				 <&CP110_LABEL(clk) 1 17>;
+			marvell,system-controller = <&CP110_LABEL(syscon0)>;
+			status = "disabled";
+		};
+
+		CP110_LABEL(trng): trng@760000 {
+			compatible = "marvell,armada-8k-rng",
+			"inside-secure,safexcel-eip76";
+			reg = <0x760000 0x7d>;
+			interrupts = <ICU_GRP_NSR 95 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "core", "reg";
+			clocks = <&CP110_LABEL(clk) 1 25>,
+				 <&CP110_LABEL(clk) 1 17>;
+			status = "okay";
+		};
+
+		CP110_LABEL(sdhci0): sdhci@780000 {
+			compatible = "marvell,armada-cp110-sdhci";
+			reg = <0x780000 0x300>;
+			interrupts = <ICU_GRP_NSR 27 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "core", "axi";
+			clocks = <&CP110_LABEL(clk) 1 4>, <&CP110_LABEL(clk) 1 18>;
+			dma-coherent;
+			status = "disabled";
+		};
+
+		CP110_LABEL(crypto): crypto@800000 {
+			compatible = "inside-secure,safexcel-eip197b";
+			reg = <0x800000 0x200000>;
+			interrupts = <ICU_GRP_NSR 87 IRQ_TYPE_LEVEL_HIGH>,
+				<ICU_GRP_NSR 88 IRQ_TYPE_LEVEL_HIGH>,
+				<ICU_GRP_NSR 89 IRQ_TYPE_LEVEL_HIGH>,
+				<ICU_GRP_NSR 90 IRQ_TYPE_LEVEL_HIGH>,
+				<ICU_GRP_NSR 91 IRQ_TYPE_LEVEL_HIGH>,
+				<ICU_GRP_NSR 92 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "mem", "ring0", "ring1",
+				"ring2", "ring3", "eip";
+			clock-names = "core", "reg";
+			clocks = <&CP110_LABEL(clk) 1 26>,
+				 <&CP110_LABEL(clk) 1 17>;
+			dma-coherent;
+		};
+	};
+
+	CP110_LABEL(pcie0): pcie@CP110_PCIE0_BASE {
+		compatible = "marvell,armada8k-pcie", "snps,dw-pcie";
+		reg = <0 ADDRESSIFY(CP110_PCIE0_BASE) 0 0x10000>,
+		      <0 CP110_PCIEx_CONF_BASE(0) 0 0x80000>;
+		reg-names = "ctrl", "config";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		#interrupt-cells = <1>;
+		device_type = "pci";
+		dma-coherent;
+		msi-parent = <&gic_v2m0>;
+
+		bus-range = <0 0xff>;
+		ranges =
+		/* downstream I/O */
+		<0x81000000 0 CP110_PCIEx_IO_BASE(0) 0  CP110_PCIEx_IO_BASE(0) 0 0x10000
+		/* non-prefetchable memory */
+		0x82000000 0 CP110_PCIEx_MEM_BASE(0) 0  CP110_PCIEx_MEM_BASE(0) 0 0xf00000>;
+		interrupt-map-mask = <0 0 0 0>;
+		interrupt-map = <0 0 0 0 &CP110_LABEL(icu) ICU_GRP_NSR 22 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <ICU_GRP_NSR 22 IRQ_TYPE_LEVEL_HIGH>;
+		num-lanes = <1>;
+		clock-names = "core", "reg";
+		clocks = <&CP110_LABEL(clk) 1 13>, <&CP110_LABEL(clk) 1 14>;
+		status = "disabled";
+	};
+
+	CP110_LABEL(pcie1): pcie@CP110_PCIE1_BASE {
+		compatible = "marvell,armada8k-pcie", "snps,dw-pcie";
+		reg = <0 ADDRESSIFY(CP110_PCIE1_BASE) 0 0x10000>,
+		      <0 CP110_PCIEx_CONF_BASE(1) 0 0x80000>;
+		reg-names = "ctrl", "config";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		#interrupt-cells = <1>;
+		device_type = "pci";
+		dma-coherent;
+		msi-parent = <&gic_v2m0>;
+
+		bus-range = <0 0xff>;
+		ranges =
+		/* downstream I/O */
+		<0x81000000 0 CP110_PCIEx_IO_BASE(1) 0  CP110_PCIEx_IO_BASE(1) 0 0x10000
+		/* non-prefetchable memory */
+		0x82000000 0 CP110_PCIEx_MEM_BASE(1) 0  CP110_PCIEx_MEM_BASE(1) 0 0xf00000>;
+		interrupt-map-mask = <0 0 0 0>;
+		interrupt-map = <0 0 0 0 &CP110_LABEL(icu) ICU_GRP_NSR 24 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <ICU_GRP_NSR 24 IRQ_TYPE_LEVEL_HIGH>;
+
+		num-lanes = <1>;
+		clock-names = "core", "reg";
+		clocks = <&CP110_LABEL(clk) 1 11>, <&CP110_LABEL(clk) 1 14>;
+		status = "disabled";
+	};
+
+	CP110_LABEL(pcie2): pcie@CP110_PCIE2_BASE {
+		compatible = "marvell,armada8k-pcie", "snps,dw-pcie";
+		reg = <0 ADDRESSIFY(CP110_PCIE2_BASE) 0 0x10000>,
+		      <0 CP110_PCIEx_CONF_BASE(2) 0 0x80000>;
+		reg-names = "ctrl", "config";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		#interrupt-cells = <1>;
+		device_type = "pci";
+		dma-coherent;
+		msi-parent = <&gic_v2m0>;
+
+		bus-range = <0 0xff>;
+		ranges =
+		/* downstream I/O */
+		<0x81000000 0 CP110_PCIEx_IO_BASE(2) 0  CP110_PCIEx_IO_BASE(2) 0 0x10000
+		/* non-prefetchable memory */
+		0x82000000 0 CP110_PCIEx_MEM_BASE(2) 0  CP110_PCIEx_MEM_BASE(2) 0 0xf00000>;
+		interrupt-map-mask = <0 0 0 0>;
+		interrupt-map = <0 0 0 0 &CP110_LABEL(icu) ICU_GRP_NSR 23 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <ICU_GRP_NSR 23 IRQ_TYPE_LEVEL_HIGH>;
+
+		num-lanes = <1>;
+		clock-names = "core", "reg";
+		clocks = <&CP110_LABEL(clk) 1 12>, <&CP110_LABEL(clk) 1 14>;
+		status = "disabled";
+	};
+};