Adding upstream version 4.19.249.upstream/4.19.249upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 156 insertions, 0 deletions

diff --git a/arch/m68k/coldfire/amcore.c b/arch/m68k/coldfire/amcore.c
new file mode 100644
index 000000000..c6cb1a5cc
--- /dev/null
+++ b/arch/m68k/coldfire/amcore.c
@@ -0,0 +1,156 @@
+/*
+ * amcore.c -- Support for Sysam AMCORE open board
+ *
+ * (C) Copyright 2016, Angelo Dureghello <angelo@sysam.it>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file COPYING in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/dm9000.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/i2c.h>
+
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+#include <asm/io.h>
+
+#if IS_ENABLED(CONFIG_DM9000)
+
+#define DM9000_IRQ	25
+#define DM9000_ADDR	0x30000000
+
+/*
+ * DEVICES and related device RESOURCES
+ */
+static struct resource dm9000_resources[] = {
+	/* physical address of the address register (CMD [A2] to 0)*/
+	[0] = {
+		.start  = DM9000_ADDR,
+		.end    = DM9000_ADDR,
+		.flags  = IORESOURCE_MEM,
+	},
+	/*
+	 * physical address of the data register (CMD [A2] to 1),
+	 * driver wants a range >=4 to assume a 32bit data bus
+	 */
+	[1] = {
+		.start  = DM9000_ADDR + 4,
+		.end    = DM9000_ADDR + 7,
+		.flags  = IORESOURCE_MEM,
+	},
+	/* IRQ line the device's interrupt pin is connected to */
+	[2] = {
+		.start  = DM9000_IRQ,
+		.end    = DM9000_IRQ,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct dm9000_plat_data dm9000_platdata = {
+	.flags		= DM9000_PLATF_32BITONLY,
+};
+
+static struct platform_device dm9000_device = {
+	.name           = "dm9000",
+	.id             = 0,
+	.num_resources  = ARRAY_SIZE(dm9000_resources),
+	.resource       = dm9000_resources,
+	.dev = {
+		.platform_data = &dm9000_platdata,
+	}
+};
+#endif
+
+static void __init dm9000_pre_init(void)
+{
+	/* Set the dm9000 interrupt to be auto-vectored */
+	mcf_autovector(DM9000_IRQ);
+}
+
+/*
+ * Partitioning of parallel NOR flash (39VF3201B)
+ */
+static struct mtd_partition amcore_partitions[] = {
+	{
+		.name	= "U-Boot (128K)",
+		.size	= 0x20000,
+		.offset	= 0x0
+	},
+	{
+		.name	= "Kernel+ROMfs (2994K)",
+		.size	= 0x2E0000,
+		.offset	= MTDPART_OFS_APPEND
+	},
+	{
+		.name	= "Flash Free Space (1024K)",
+		.size	= MTDPART_SIZ_FULL,
+		.offset	= MTDPART_OFS_APPEND
+	}
+};
+
+static struct physmap_flash_data flash_data = {
+	.parts		= amcore_partitions,
+	.nr_parts	= ARRAY_SIZE(amcore_partitions),
+	.width		= 2,
+};
+
+static struct resource flash_resource = {
+	.start		= 0xffc00000,
+	.end		= 0xffffffff,
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device flash_device = {
+	.name		= "physmap-flash",
+	.id		= -1,
+	.resource	= &flash_resource,
+	.num_resources	= 1,
+	.dev		= {
+		.platform_data	= &flash_data,
+	},
+};
+
+static struct platform_device rtc_device = {
+	.name	= "rtc-ds1307",
+	.id	= -1,
+};
+
+static struct i2c_board_info amcore_i2c_info[] __initdata = {
+	{
+		I2C_BOARD_INFO("ds1338", 0x68),
+	},
+};
+
+static struct platform_device *amcore_devices[] __initdata = {
+#if IS_ENABLED(CONFIG_DM9000)
+	&dm9000_device,
+#endif
+	&flash_device,
+	&rtc_device,
+};
+
+static int __init init_amcore(void)
+{
+#if IS_ENABLED(CONFIG_DM9000)
+	dm9000_pre_init();
+#endif
+
+	/* Add i2c RTC Dallas chip supprt */
+	i2c_register_board_info(0, amcore_i2c_info,
+				ARRAY_SIZE(amcore_i2c_info));
+
+	platform_add_devices(amcore_devices, ARRAY_SIZE(amcore_devices));
+
+	return 0;
+}
+
+arch_initcall(init_amcore);