Adding upstream version 4.19.249.upstream/4.19.249upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

39 files changed, 6090 insertions, 0 deletions

diff --git a/arch/m68k/coldfire/Makefile b/arch/m68k/coldfire/Makefile
new file mode 100644
index 000000000..573eabca1
--- /dev/null
+++ b/arch/m68k/coldfire/Makefile
@@ -0,0 +1,44 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for the m68knommu kernel.
+#
+
+#
+# If you want to play with the HW breakpoints then you will
+# need to add define this,  which will give you a stack backtrace
+# on the console port whenever a DBG interrupt occurs. You have to
+# set up you HW breakpoints to trigger a DBG interrupt:
+#
+# ccflags-y := -DTRAP_DBG_INTERRUPT
+# asflags-y := -DTRAP_DBG_INTERRUPT
+#
+
+asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1
+
+obj-$(CONFIG_COLDFIRE)	+= cache.o clk.o device.o dma.o entry.o vectors.o
+obj-$(CONFIG_M5206)	+= m5206.o timers.o intc.o reset.o
+obj-$(CONFIG_M5206e)	+= m5206.o timers.o intc.o reset.o
+obj-$(CONFIG_M520x)	+= m520x.o pit.o intc-simr.o reset.o
+obj-$(CONFIG_M523x)	+= m523x.o pit.o dma_timer.o intc-2.o reset.o
+obj-$(CONFIG_M5249)	+= m5249.o timers.o intc.o intc-5249.o reset.o
+obj-$(CONFIG_M525x)	+= m525x.o timers.o intc.o intc-525x.o reset.o
+obj-$(CONFIG_M527x)	+= m527x.o pit.o intc-2.o reset.o
+obj-$(CONFIG_M5272)	+= m5272.o intc-5272.o timers.o
+obj-$(CONFIG_M528x)	+= m528x.o pit.o intc-2.o reset.o
+obj-$(CONFIG_M5307)	+= m5307.o timers.o intc.o reset.o
+obj-$(CONFIG_M53xx)	+= m53xx.o timers.o intc-simr.o reset.o
+obj-$(CONFIG_M5407)	+= m5407.o timers.o intc.o reset.o
+obj-$(CONFIG_M54xx)	+= m54xx.o sltimers.o intc-2.o
+obj-$(CONFIG_M5441x)	+= m5441x.o pit.o intc-simr.o reset.o
+
+obj-$(CONFIG_NETtel)	+= nettel.o
+obj-$(CONFIG_CLEOPATRA)	+= nettel.o
+obj-$(CONFIG_FIREBEE)	+= firebee.o
+obj-$(CONFIG_MCF8390)	+= mcf8390.o
+obj-$(CONFIG_AMCORE)	+= amcore.o
+obj-$(CONFIG_STMARK2)	+= stmark2.o
+
+obj-$(CONFIG_PCI)	+= pci.o
+
+obj-y			+= gpio.o
+extra-y := head.o
diff --git a/arch/m68k/coldfire/amcore.c b/arch/m68k/coldfire/amcore.c
new file mode 100644
index 000000000..c6cb1a5cc
--- /dev/null
+++ b/arch/m68k/coldfire/amcore.c
@@ -0,0 +1,156 @@
+/*
+ * amcore.c -- Support for Sysam AMCORE open board
+ *
+ * (C) Copyright 2016, Angelo Dureghello <angelo@sysam.it>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file COPYING in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/dm9000.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/i2c.h>
+
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+#include <asm/io.h>
+
+#if IS_ENABLED(CONFIG_DM9000)
+
+#define DM9000_IRQ	25
+#define DM9000_ADDR	0x30000000
+
+/*
+ * DEVICES and related device RESOURCES
+ */
+static struct resource dm9000_resources[] = {
+	/* physical address of the address register (CMD [A2] to 0)*/
+	[0] = {
+		.start  = DM9000_ADDR,
+		.end    = DM9000_ADDR,
+		.flags  = IORESOURCE_MEM,
+	},
+	/*
+	 * physical address of the data register (CMD [A2] to 1),
+	 * driver wants a range >=4 to assume a 32bit data bus
+	 */
+	[1] = {
+		.start  = DM9000_ADDR + 4,
+		.end    = DM9000_ADDR + 7,
+		.flags  = IORESOURCE_MEM,
+	},
+	/* IRQ line the device's interrupt pin is connected to */
+	[2] = {
+		.start  = DM9000_IRQ,
+		.end    = DM9000_IRQ,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct dm9000_plat_data dm9000_platdata = {
+	.flags		= DM9000_PLATF_32BITONLY,
+};
+
+static struct platform_device dm9000_device = {
+	.name           = "dm9000",
+	.id             = 0,
+	.num_resources  = ARRAY_SIZE(dm9000_resources),
+	.resource       = dm9000_resources,
+	.dev = {
+		.platform_data = &dm9000_platdata,
+	}
+};
+#endif
+
+static void __init dm9000_pre_init(void)
+{
+	/* Set the dm9000 interrupt to be auto-vectored */
+	mcf_autovector(DM9000_IRQ);
+}
+
+/*
+ * Partitioning of parallel NOR flash (39VF3201B)
+ */
+static struct mtd_partition amcore_partitions[] = {
+	{
+		.name	= "U-Boot (128K)",
+		.size	= 0x20000,
+		.offset	= 0x0
+	},
+	{
+		.name	= "Kernel+ROMfs (2994K)",
+		.size	= 0x2E0000,
+		.offset	= MTDPART_OFS_APPEND
+	},
+	{
+		.name	= "Flash Free Space (1024K)",
+		.size	= MTDPART_SIZ_FULL,
+		.offset	= MTDPART_OFS_APPEND
+	}
+};
+
+static struct physmap_flash_data flash_data = {
+	.parts		= amcore_partitions,
+	.nr_parts	= ARRAY_SIZE(amcore_partitions),
+	.width		= 2,
+};
+
+static struct resource flash_resource = {
+	.start		= 0xffc00000,
+	.end		= 0xffffffff,
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device flash_device = {
+	.name		= "physmap-flash",
+	.id		= -1,
+	.resource	= &flash_resource,
+	.num_resources	= 1,
+	.dev		= {
+		.platform_data	= &flash_data,
+	},
+};
+
+static struct platform_device rtc_device = {
+	.name	= "rtc-ds1307",
+	.id	= -1,
+};
+
+static struct i2c_board_info amcore_i2c_info[] __initdata = {
+	{
+		I2C_BOARD_INFO("ds1338", 0x68),
+	},
+};
+
+static struct platform_device *amcore_devices[] __initdata = {
+#if IS_ENABLED(CONFIG_DM9000)
+	&dm9000_device,
+#endif
+	&flash_device,
+	&rtc_device,
+};
+
+static int __init init_amcore(void)
+{
+#if IS_ENABLED(CONFIG_DM9000)
+	dm9000_pre_init();
+#endif
+
+	/* Add i2c RTC Dallas chip supprt */
+	i2c_register_board_info(0, amcore_i2c_info,
+				ARRAY_SIZE(amcore_i2c_info));
+
+	platform_add_devices(amcore_devices, ARRAY_SIZE(amcore_devices));
+
+	return 0;
+}
+
+arch_initcall(init_amcore);
diff --git a/arch/m68k/coldfire/cache.c b/arch/m68k/coldfire/cache.c
new file mode 100644
index 000000000..98ee89b87
--- /dev/null
+++ b/arch/m68k/coldfire/cache.c
@@ -0,0 +1,49 @@
+// SPDX-License-Identifier: GPL-2.0
+/***************************************************************************/
+
+/*
+ *	cache.c -- general ColdFire Cache maintenance code
+ *
+ *	Copyright (C) 2010, Greg Ungerer (gerg@snapgear.com)
+ */
+
+/***************************************************************************/
+
+#include <linux/kernel.h>
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+
+/***************************************************************************/
+#ifdef CACHE_PUSH
+/***************************************************************************/
+
+/*
+ *	Use cpushl to push all dirty cache lines back to memory.
+ *	Older versions of GAS don't seem to know how to generate the
+ *	ColdFire cpushl instruction... Oh well, bit stuff it for now.
+ */
+
+void mcf_cache_push(void)
+{
+	__asm__ __volatile__ (
+		"clrl	%%d0\n\t"
+		"1:\n\t"
+		"movel	%%d0,%%a0\n\t"
+		"2:\n\t"
+		".word	0xf468\n\t"
+		"addl	%0,%%a0\n\t"
+		"cmpl	%1,%%a0\n\t"
+		"blt	2b\n\t"
+		"addql	#1,%%d0\n\t"
+		"cmpil	%2,%%d0\n\t"
+		"bne	1b\n\t"
+		: /* No output */
+		: "i" (CACHE_LINE_SIZE),
+		  "i" (DCACHE_SIZE / CACHE_WAYS),
+		  "i" (CACHE_WAYS)
+		: "d0", "a0" );
+}
+
+/***************************************************************************/
+#endif /* CACHE_PUSH */
+/***************************************************************************/
diff --git a/arch/m68k/coldfire/clk.c b/arch/m68k/coldfire/clk.c
new file mode 100644
index 000000000..7bc666e48
--- /dev/null
+++ b/arch/m68k/coldfire/clk.c
@@ -0,0 +1,161 @@
+// SPDX-License-Identifier: GPL-2.0
+/***************************************************************************/
+
+/*
+ *	clk.c -- general ColdFire CPU kernel clk handling
+ *
+ *	Copyright (C) 2009, Greg Ungerer (gerg@snapgear.com)
+ */
+
+/***************************************************************************/
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/mutex.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/err.h>
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+#include <asm/mcfclk.h>
+
+static DEFINE_SPINLOCK(clk_lock);
+
+#ifdef MCFPM_PPMCR0
+/*
+ *	For more advanced ColdFire parts that have clocks that can be enabled
+ *	we supply enable/disable functions. These must properly define their
+ *	clocks in their platform specific code.
+ */
+void __clk_init_enabled(struct clk *clk)
+{
+	clk->enabled = 1;
+	clk->clk_ops->enable(clk);
+}
+
+void __clk_init_disabled(struct clk *clk)
+{
+	clk->enabled = 0;
+	clk->clk_ops->disable(clk);
+}
+
+static void __clk_enable0(struct clk *clk)
+{
+	__raw_writeb(clk->slot, MCFPM_PPMCR0);
+}
+
+static void __clk_disable0(struct clk *clk)
+{
+	__raw_writeb(clk->slot, MCFPM_PPMSR0);
+}
+
+struct clk_ops clk_ops0 = {
+	.enable		= __clk_enable0,
+	.disable	= __clk_disable0,
+};
+
+#ifdef MCFPM_PPMCR1
+static void __clk_enable1(struct clk *clk)
+{
+	__raw_writeb(clk->slot, MCFPM_PPMCR1);
+}
+
+static void __clk_disable1(struct clk *clk)
+{
+	__raw_writeb(clk->slot, MCFPM_PPMSR1);
+}
+
+struct clk_ops clk_ops1 = {
+	.enable		= __clk_enable1,
+	.disable	= __clk_disable1,
+};
+#endif /* MCFPM_PPMCR1 */
+#endif /* MCFPM_PPMCR0 */
+
+struct clk *clk_get(struct device *dev, const char *id)
+{
+	const char *clk_name = dev ? dev_name(dev) : id ? id : NULL;
+	struct clk *clk;
+	unsigned i;
+
+	for (i = 0; (clk = mcf_clks[i]) != NULL; ++i)
+		if (!strcmp(clk->name, clk_name))
+			return clk;
+	pr_warn("clk_get: didn't find clock %s\n", clk_name);
+	return ERR_PTR(-ENOENT);
+}
+EXPORT_SYMBOL(clk_get);
+
+int clk_enable(struct clk *clk)
+{
+	unsigned long flags;
+	spin_lock_irqsave(&clk_lock, flags);
+	if ((clk->enabled++ == 0) && clk->clk_ops)
+		clk->clk_ops->enable(clk);
+	spin_unlock_irqrestore(&clk_lock, flags);
+
+	return 0;
+}
+EXPORT_SYMBOL(clk_enable);
+
+void clk_disable(struct clk *clk)
+{
+	unsigned long flags;
+
+	if (!clk)
+		return;
+
+	spin_lock_irqsave(&clk_lock, flags);
+	if ((--clk->enabled == 0) && clk->clk_ops)
+		clk->clk_ops->disable(clk);
+	spin_unlock_irqrestore(&clk_lock, flags);
+}
+EXPORT_SYMBOL(clk_disable);
+
+void clk_put(struct clk *clk)
+{
+	if (clk->enabled != 0)
+		pr_warn("clk_put %s still enabled\n", clk->name);
+}
+EXPORT_SYMBOL(clk_put);
+
+unsigned long clk_get_rate(struct clk *clk)
+{
+	if (!clk)
+		return 0;
+
+	return clk->rate;
+}
+EXPORT_SYMBOL(clk_get_rate);
+
+/* dummy functions, should not be called */
+long clk_round_rate(struct clk *clk, unsigned long rate)
+{
+	WARN_ON(clk);
+	return 0;
+}
+EXPORT_SYMBOL(clk_round_rate);
+
+int clk_set_rate(struct clk *clk, unsigned long rate)
+{
+	WARN_ON(clk);
+	return 0;
+}
+EXPORT_SYMBOL(clk_set_rate);
+
+int clk_set_parent(struct clk *clk, struct clk *parent)
+{
+	WARN_ON(clk);
+	return 0;
+}
+EXPORT_SYMBOL(clk_set_parent);
+
+struct clk *clk_get_parent(struct clk *clk)
+{
+	WARN_ON(clk);
+	return NULL;
+}
+EXPORT_SYMBOL(clk_get_parent);
+
+/***************************************************************************/
diff --git a/arch/m68k/coldfire/device.c b/arch/m68k/coldfire/device.c
new file mode 100644
index 000000000..908d58347
--- /dev/null
+++ b/arch/m68k/coldfire/device.c
@@ -0,0 +1,536 @@
+/*
+ * device.c  -- common ColdFire SoC device support
+ *
+ * (C) Copyright 2011, Greg Ungerer <gerg@uclinux.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file COPYING in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/spi/spi.h>
+#include <linux/gpio.h>
+#include <linux/fec.h>
+#include <asm/traps.h>
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+#include <asm/mcfuart.h>
+#include <asm/mcfqspi.h>
+
+/*
+ *	All current ColdFire parts contain from 2, 3, 4 or 10 UARTS.
+ */
+static struct mcf_platform_uart mcf_uart_platform_data[] = {
+	{
+		.mapbase	= MCFUART_BASE0,
+		.irq		= MCF_IRQ_UART0,
+	},
+	{
+		.mapbase	= MCFUART_BASE1,
+		.irq		= MCF_IRQ_UART1,
+	},
+#ifdef MCFUART_BASE2
+	{
+		.mapbase	= MCFUART_BASE2,
+		.irq		= MCF_IRQ_UART2,
+	},
+#endif
+#ifdef MCFUART_BASE3
+	{
+		.mapbase	= MCFUART_BASE3,
+		.irq		= MCF_IRQ_UART3,
+	},
+#endif
+#ifdef MCFUART_BASE4
+	{
+		.mapbase	= MCFUART_BASE4,
+		.irq		= MCF_IRQ_UART4,
+	},
+#endif
+#ifdef MCFUART_BASE5
+	{
+		.mapbase	= MCFUART_BASE5,
+		.irq		= MCF_IRQ_UART5,
+	},
+#endif
+#ifdef MCFUART_BASE6
+	{
+		.mapbase	= MCFUART_BASE6,
+		.irq		= MCF_IRQ_UART6,
+	},
+#endif
+#ifdef MCFUART_BASE7
+	{
+		.mapbase	= MCFUART_BASE7,
+		.irq		= MCF_IRQ_UART7,
+	},
+#endif
+#ifdef MCFUART_BASE8
+	{
+		.mapbase	= MCFUART_BASE8,
+		.irq		= MCF_IRQ_UART8,
+	},
+#endif
+#ifdef MCFUART_BASE9
+	{
+		.mapbase	= MCFUART_BASE9,
+		.irq		= MCF_IRQ_UART9,
+	},
+#endif
+	{ },
+};
+
+static struct platform_device mcf_uart = {
+	.name			= "mcfuart",
+	.id			= 0,
+	.dev.platform_data	= mcf_uart_platform_data,
+};
+
+#if IS_ENABLED(CONFIG_FEC)
+
+#ifdef CONFIG_M5441x
+#define FEC_NAME	"enet-fec"
+static struct fec_platform_data fec_pdata = {
+	.phy		= PHY_INTERFACE_MODE_RMII,
+};
+#define FEC_PDATA	(&fec_pdata)
+#else
+#define FEC_NAME	"fec"
+#define FEC_PDATA	NULL
+#endif
+
+/*
+ *	Some ColdFire cores contain the Fast Ethernet Controller (FEC)
+ *	block. It is Freescale's own hardware block. Some ColdFires
+ *	have 2 of these.
+ */
+static struct resource mcf_fec0_resources[] = {
+	{
+		.start		= MCFFEC_BASE0,
+		.end		= MCFFEC_BASE0 + MCFFEC_SIZE0 - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+	{
+		.start		= MCF_IRQ_FECRX0,
+		.end		= MCF_IRQ_FECRX0,
+		.flags		= IORESOURCE_IRQ,
+	},
+	{
+		.start		= MCF_IRQ_FECTX0,
+		.end		= MCF_IRQ_FECTX0,
+		.flags		= IORESOURCE_IRQ,
+	},
+	{
+		.start		= MCF_IRQ_FECENTC0,
+		.end		= MCF_IRQ_FECENTC0,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device mcf_fec0 = {
+	.name			= FEC_NAME,
+	.id			= 0,
+	.num_resources		= ARRAY_SIZE(mcf_fec0_resources),
+	.resource		= mcf_fec0_resources,
+	.dev = {
+		.dma_mask		= &mcf_fec0.dev.coherent_dma_mask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+		.platform_data		= FEC_PDATA,
+	}
+};
+
+#ifdef MCFFEC_BASE1
+static struct resource mcf_fec1_resources[] = {
+	{
+		.start		= MCFFEC_BASE1,
+		.end		= MCFFEC_BASE1 + MCFFEC_SIZE1 - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+	{
+		.start		= MCF_IRQ_FECRX1,
+		.end		= MCF_IRQ_FECRX1,
+		.flags		= IORESOURCE_IRQ,
+	},
+	{
+		.start		= MCF_IRQ_FECTX1,
+		.end		= MCF_IRQ_FECTX1,
+		.flags		= IORESOURCE_IRQ,
+	},
+	{
+		.start		= MCF_IRQ_FECENTC1,
+		.end		= MCF_IRQ_FECENTC1,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device mcf_fec1 = {
+	.name			= FEC_NAME,
+	.id			= 1,
+	.num_resources		= ARRAY_SIZE(mcf_fec1_resources),
+	.resource		= mcf_fec1_resources,
+	.dev = {
+		.dma_mask		= &mcf_fec1.dev.coherent_dma_mask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+		.platform_data		= FEC_PDATA,
+	}
+};
+#endif /* MCFFEC_BASE1 */
+#endif /* CONFIG_FEC */
+
+#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI)
+/*
+ *	The ColdFire QSPI module is an SPI protocol hardware block used
+ *	on a number of different ColdFire CPUs.
+ */
+static struct resource mcf_qspi_resources[] = {
+	{
+		.start		= MCFQSPI_BASE,
+		.end		= MCFQSPI_BASE + MCFQSPI_SIZE - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+	{
+		.start		= MCF_IRQ_QSPI,
+		.end		= MCF_IRQ_QSPI,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static int mcf_cs_setup(struct mcfqspi_cs_control *cs_control)
+{
+	int status;
+
+	status = gpio_request(MCFQSPI_CS0, "MCFQSPI_CS0");
+	if (status) {
+		pr_debug("gpio_request for MCFQSPI_CS0 failed\n");
+		goto fail0;
+	}
+	status = gpio_direction_output(MCFQSPI_CS0, 1);
+	if (status) {
+		pr_debug("gpio_direction_output for MCFQSPI_CS0 failed\n");
+		goto fail1;
+	}
+
+	status = gpio_request(MCFQSPI_CS1, "MCFQSPI_CS1");
+	if (status) {
+		pr_debug("gpio_request for MCFQSPI_CS1 failed\n");
+		goto fail1;
+	}
+	status = gpio_direction_output(MCFQSPI_CS1, 1);
+	if (status) {
+		pr_debug("gpio_direction_output for MCFQSPI_CS1 failed\n");
+		goto fail2;
+	}
+
+	status = gpio_request(MCFQSPI_CS2, "MCFQSPI_CS2");
+	if (status) {
+		pr_debug("gpio_request for MCFQSPI_CS2 failed\n");
+		goto fail2;
+	}
+	status = gpio_direction_output(MCFQSPI_CS2, 1);
+	if (status) {
+		pr_debug("gpio_direction_output for MCFQSPI_CS2 failed\n");
+		goto fail3;
+	}
+
+#ifdef MCFQSPI_CS3
+	status = gpio_request(MCFQSPI_CS3, "MCFQSPI_CS3");
+	if (status) {
+		pr_debug("gpio_request for MCFQSPI_CS3 failed\n");
+		goto fail3;
+	}
+	status = gpio_direction_output(MCFQSPI_CS3, 1);
+	if (status) {
+		pr_debug("gpio_direction_output for MCFQSPI_CS3 failed\n");
+		gpio_free(MCFQSPI_CS3);
+		goto fail3;
+	}
+#endif
+
+	return 0;
+
+fail3:
+	gpio_free(MCFQSPI_CS2);
+fail2:
+	gpio_free(MCFQSPI_CS1);
+fail1:
+	gpio_free(MCFQSPI_CS0);
+fail0:
+	return status;
+}
+
+static void mcf_cs_teardown(struct mcfqspi_cs_control *cs_control)
+{
+#ifdef MCFQSPI_CS3
+	gpio_free(MCFQSPI_CS3);
+#endif
+	gpio_free(MCFQSPI_CS2);
+	gpio_free(MCFQSPI_CS1);
+	gpio_free(MCFQSPI_CS0);
+}
+
+static void mcf_cs_select(struct mcfqspi_cs_control *cs_control,
+			  u8 chip_select, bool cs_high)
+{
+	switch (chip_select) {
+	case 0:
+		gpio_set_value(MCFQSPI_CS0, cs_high);
+		break;
+	case 1:
+		gpio_set_value(MCFQSPI_CS1, cs_high);
+		break;
+	case 2:
+		gpio_set_value(MCFQSPI_CS2, cs_high);
+		break;
+#ifdef MCFQSPI_CS3
+	case 3:
+		gpio_set_value(MCFQSPI_CS3, cs_high);
+		break;
+#endif
+	}
+}
+
+static void mcf_cs_deselect(struct mcfqspi_cs_control *cs_control,
+			    u8 chip_select, bool cs_high)
+{
+	switch (chip_select) {
+	case 0:
+		gpio_set_value(MCFQSPI_CS0, !cs_high);
+		break;
+	case 1:
+		gpio_set_value(MCFQSPI_CS1, !cs_high);
+		break;
+	case 2:
+		gpio_set_value(MCFQSPI_CS2, !cs_high);
+		break;
+#ifdef MCFQSPI_CS3
+	case 3:
+		gpio_set_value(MCFQSPI_CS3, !cs_high);
+		break;
+#endif
+	}
+}
+
+static struct mcfqspi_cs_control mcf_cs_control = {
+	.setup			= mcf_cs_setup,
+	.teardown		= mcf_cs_teardown,
+	.select			= mcf_cs_select,
+	.deselect		= mcf_cs_deselect,
+};
+
+static struct mcfqspi_platform_data mcf_qspi_data = {
+	.bus_num		= 0,
+	.num_chipselect		= 4,
+	.cs_control		= &mcf_cs_control,
+};
+
+static struct platform_device mcf_qspi = {
+	.name			= "mcfqspi",
+	.id			= 0,
+	.num_resources		= ARRAY_SIZE(mcf_qspi_resources),
+	.resource		= mcf_qspi_resources,
+	.dev.platform_data	= &mcf_qspi_data,
+};
+#endif /* IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI) */
+
+#if IS_ENABLED(CONFIG_I2C_IMX)
+static struct resource mcf_i2c0_resources[] = {
+	{
+		.start          = MCFI2C_BASE0,
+		.end            = MCFI2C_BASE0 + MCFI2C_SIZE0 - 1,
+		.flags          = IORESOURCE_MEM,
+	},
+	{
+		.start          = MCF_IRQ_I2C0,
+		.end            = MCF_IRQ_I2C0,
+		.flags          = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device mcf_i2c0 = {
+	.name                   = "imx1-i2c",
+	.id                     = 0,
+	.num_resources          = ARRAY_SIZE(mcf_i2c0_resources),
+	.resource               = mcf_i2c0_resources,
+};
+#ifdef MCFI2C_BASE1
+
+static struct resource mcf_i2c1_resources[] = {
+	{
+		.start          = MCFI2C_BASE1,
+		.end            = MCFI2C_BASE1 + MCFI2C_SIZE1 - 1,
+		.flags          = IORESOURCE_MEM,
+	},
+	{
+		.start          = MCF_IRQ_I2C1,
+		.end            = MCF_IRQ_I2C1,
+		.flags          = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device mcf_i2c1 = {
+	.name                   = "imx1-i2c",
+	.id                     = 1,
+	.num_resources          = ARRAY_SIZE(mcf_i2c1_resources),
+	.resource               = mcf_i2c1_resources,
+};
+
+#endif /* MCFI2C_BASE1 */
+
+#ifdef MCFI2C_BASE2
+
+static struct resource mcf_i2c2_resources[] = {
+	{
+		.start          = MCFI2C_BASE2,
+		.end            = MCFI2C_BASE2 + MCFI2C_SIZE2 - 1,
+		.flags          = IORESOURCE_MEM,
+	},
+	{
+		.start          = MCF_IRQ_I2C2,
+		.end            = MCF_IRQ_I2C2,
+		.flags          = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device mcf_i2c2 = {
+	.name                   = "imx1-i2c",
+	.id                     = 2,
+	.num_resources          = ARRAY_SIZE(mcf_i2c2_resources),
+	.resource               = mcf_i2c2_resources,
+};
+
+#endif /* MCFI2C_BASE2 */
+
+#ifdef MCFI2C_BASE3
+
+static struct resource mcf_i2c3_resources[] = {
+	{
+		.start          = MCFI2C_BASE3,
+		.end            = MCFI2C_BASE3 + MCFI2C_SIZE3 - 1,
+		.flags          = IORESOURCE_MEM,
+	},
+	{
+		.start          = MCF_IRQ_I2C3,
+		.end            = MCF_IRQ_I2C3,
+		.flags          = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device mcf_i2c3 = {
+	.name                   = "imx1-i2c",
+	.id                     = 3,
+	.num_resources          = ARRAY_SIZE(mcf_i2c3_resources),
+	.resource               = mcf_i2c3_resources,
+};
+
+#endif /* MCFI2C_BASE3 */
+
+#ifdef MCFI2C_BASE4
+
+static struct resource mcf_i2c4_resources[] = {
+	{
+		.start          = MCFI2C_BASE4,
+		.end            = MCFI2C_BASE4 + MCFI2C_SIZE4 - 1,
+		.flags          = IORESOURCE_MEM,
+	},
+	{
+		.start          = MCF_IRQ_I2C4,
+		.end            = MCF_IRQ_I2C4,
+		.flags          = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device mcf_i2c4 = {
+	.name                   = "imx1-i2c",
+	.id                     = 4,
+	.num_resources          = ARRAY_SIZE(mcf_i2c4_resources),
+	.resource               = mcf_i2c4_resources,
+};
+
+#endif /* MCFI2C_BASE4 */
+
+#ifdef MCFI2C_BASE5
+
+static struct resource mcf_i2c5_resources[] = {
+	{
+		.start          = MCFI2C_BASE5,
+		.end            = MCFI2C_BASE5 + MCFI2C_SIZE5 - 1,
+		.flags          = IORESOURCE_MEM,
+	},
+	{
+		.start          = MCF_IRQ_I2C5,
+		.end            = MCF_IRQ_I2C5,
+		.flags          = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device mcf_i2c5 = {
+	.name                   = "imx1-i2c",
+	.id                     = 5,
+	.num_resources          = ARRAY_SIZE(mcf_i2c5_resources),
+	.resource               = mcf_i2c5_resources,
+};
+
+#endif /* MCFI2C_BASE5 */
+#endif /* IS_ENABLED(CONFIG_I2C_IMX) */
+
+static struct platform_device *mcf_devices[] __initdata = {
+	&mcf_uart,
+#if IS_ENABLED(CONFIG_FEC)
+	&mcf_fec0,
+#ifdef MCFFEC_BASE1
+	&mcf_fec1,
+#endif
+#endif
+#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI)
+	&mcf_qspi,
+#endif
+#if IS_ENABLED(CONFIG_I2C_IMX)
+	&mcf_i2c0,
+#ifdef MCFI2C_BASE1
+	&mcf_i2c1,
+#endif
+#ifdef MCFI2C_BASE2
+	&mcf_i2c2,
+#endif
+#ifdef MCFI2C_BASE3
+	&mcf_i2c3,
+#endif
+#ifdef MCFI2C_BASE4
+	&mcf_i2c4,
+#endif
+#ifdef MCFI2C_BASE5
+	&mcf_i2c5,
+#endif
+#endif
+};
+
+/*
+ *	Some ColdFire UARTs let you set the IRQ line to use.
+ */
+static void __init mcf_uart_set_irq(void)
+{
+#ifdef MCFUART_UIVR
+	/* UART0 interrupt setup */
+	writeb(MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI1, MCFSIM_UART1ICR);
+	writeb(MCF_IRQ_UART0, MCFUART_BASE0 + MCFUART_UIVR);
+	mcf_mapirq2imr(MCF_IRQ_UART0, MCFINTC_UART0);
+
+	/* UART1 interrupt setup */
+	writeb(MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI2, MCFSIM_UART2ICR);
+	writeb(MCF_IRQ_UART1, MCFUART_BASE1 + MCFUART_UIVR);
+	mcf_mapirq2imr(MCF_IRQ_UART1, MCFINTC_UART1);
+#endif
+}
+
+static int __init mcf_init_devices(void)
+{
+	mcf_uart_set_irq();
+	platform_add_devices(mcf_devices, ARRAY_SIZE(mcf_devices));
+	return 0;
+}
+
+arch_initcall(mcf_init_devices);
+
diff --git a/arch/m68k/coldfire/dma.c b/arch/m68k/coldfire/dma.c
new file mode 100644
index 000000000..c3279f746
--- /dev/null
+++ b/arch/m68k/coldfire/dma.c
@@ -0,0 +1,43 @@
+// SPDX-License-Identifier: GPL-2.0
+/***************************************************************************/
+
+/*
+ *	dma.c -- Freescale ColdFire DMA support
+ *
+ *	Copyright (C) 2007, Greg Ungerer (gerg@snapgear.com)
+ */
+
+/***************************************************************************/
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <asm/dma.h>
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+#include <asm/mcfdma.h>
+
+/***************************************************************************/
+
+/*
+ *      DMA channel base address table.
+ */
+unsigned int dma_base_addr[MAX_M68K_DMA_CHANNELS] = {
+#ifdef MCFDMA_BASE0
+	MCFDMA_BASE0,
+#endif
+#ifdef MCFDMA_BASE1
+	MCFDMA_BASE1,
+#endif
+#ifdef MCFDMA_BASE2
+	MCFDMA_BASE2,
+#endif
+#ifdef MCFDMA_BASE3
+	MCFDMA_BASE3,
+#endif
+};
+EXPORT_SYMBOL(dma_base_addr);
+
+unsigned int dma_device_address[MAX_M68K_DMA_CHANNELS];
+EXPORT_SYMBOL(dma_device_address);
+
+/***************************************************************************/
diff --git a/arch/m68k/coldfire/dma_timer.c b/arch/m68k/coldfire/dma_timer.c
new file mode 100644
index 000000000..cbb289439
--- /dev/null
+++ b/arch/m68k/coldfire/dma_timer.c
@@ -0,0 +1,82 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * dma_timer.c -- Freescale ColdFire DMA Timer.
+ *
+ * Copyright (C) 2007, Benedikt Spranger <b.spranger@linutronix.de>
+ * Copyright (C) 2008. Sebastian Siewior, Linutronix
+ *
+ */
+
+#include <linux/clocksource.h>
+#include <linux/io.h>
+
+#include <asm/machdep.h>
+#include <asm/coldfire.h>
+#include <asm/mcfpit.h>
+#include <asm/mcfsim.h>
+
+#define DMA_TIMER_0	(0x00)
+#define DMA_TIMER_1	(0x40)
+#define DMA_TIMER_2	(0x80)
+#define DMA_TIMER_3	(0xc0)
+
+#define DTMR0	(MCF_IPSBAR + DMA_TIMER_0 + 0x400)
+#define DTXMR0	(MCF_IPSBAR + DMA_TIMER_0 + 0x402)
+#define DTER0	(MCF_IPSBAR + DMA_TIMER_0 + 0x403)
+#define DTRR0	(MCF_IPSBAR + DMA_TIMER_0 + 0x404)
+#define DTCR0	(MCF_IPSBAR + DMA_TIMER_0 + 0x408)
+#define DTCN0	(MCF_IPSBAR + DMA_TIMER_0 + 0x40c)
+
+#define DMA_FREQ    ((MCF_CLK / 2) / 16)
+
+/* DTMR */
+#define DMA_DTMR_RESTART	(1 << 3)
+#define DMA_DTMR_CLK_DIV_1	(1 << 1)
+#define DMA_DTMR_CLK_DIV_16	(2 << 1)
+#define DMA_DTMR_ENABLE		(1 << 0)
+
+static u64 cf_dt_get_cycles(struct clocksource *cs)
+{
+	return __raw_readl(DTCN0);
+}
+
+static struct clocksource clocksource_cf_dt = {
+	.name		= "coldfire_dma_timer",
+	.rating		= 200,
+	.read		= cf_dt_get_cycles,
+	.mask		= CLOCKSOURCE_MASK(32),
+	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+static int __init  init_cf_dt_clocksource(void)
+{
+	/*
+	 * We setup DMA timer 0 in free run mode. This incrementing counter is
+	 * used as a highly precious clock source. With MCF_CLOCK = 150 MHz we
+	 * get a ~213 ns resolution and the 32bit register will overflow almost
+	 * every 15 minutes.
+	 */
+	__raw_writeb(0x00, DTXMR0);
+	__raw_writeb(0x00, DTER0);
+	__raw_writel(0x00000000, DTRR0);
+	__raw_writew(DMA_DTMR_CLK_DIV_16 | DMA_DTMR_ENABLE, DTMR0);
+	return clocksource_register_hz(&clocksource_cf_dt, DMA_FREQ);
+}
+
+arch_initcall(init_cf_dt_clocksource);
+
+#define CYC2NS_SCALE_FACTOR 10 /* 2^10, carefully chosen */
+#define CYC2NS_SCALE	((1000000 << CYC2NS_SCALE_FACTOR) / (DMA_FREQ / 1000))
+
+static unsigned long long cycles2ns(unsigned long cycl)
+{
+	return (unsigned long long) ((unsigned long long)cycl *
+			CYC2NS_SCALE) >> CYC2NS_SCALE_FACTOR;
+}
+
+unsigned long long sched_clock(void)
+{
+	unsigned long cycl = __raw_readl(DTCN0);
+
+	return cycles2ns(cycl);
+}
diff --git a/arch/m68k/coldfire/entry.S b/arch/m68k/coldfire/entry.S
new file mode 100644
index 000000000..52d312d5b
--- /dev/null
+++ b/arch/m68k/coldfire/entry.S
@@ -0,0 +1,203 @@
+/*
+ *  entry.S  -- interrupt and exception processing for ColdFire
+ *
+ *  Copyright (C) 1999-2007, Greg Ungerer (gerg@snapgear.com)
+ *  Copyright (C) 1998  D. Jeff Dionne <jeff@lineo.ca>,
+ *                      Kenneth Albanowski <kjahds@kjahds.com>,
+ *  Copyright (C) 2000  Lineo Inc. (www.lineo.com)
+ *  Copyright (C) 2004-2006  Macq Electronique SA. (www.macqel.com)
+ *
+ * Based on:
+ *
+ *  linux/arch/m68k/kernel/entry.S
+ *
+ *  Copyright (C) 1991, 1992  Linus Torvalds
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file README.legal in the main directory of this archive
+ * for more details.
+ *
+ * Linux/m68k support by Hamish Macdonald
+ *
+ * 68060 fixes by Jesper Skov
+ * ColdFire support by Greg Ungerer (gerg@snapgear.com)
+ * 5307 fixes by David W. Miller
+ * linux 2.4 support David McCullough <davidm@snapgear.com>
+ * Bug, speed and maintainability fixes by Philippe De Muyter <phdm@macqel.be>
+ */
+
+#include <linux/linkage.h>
+#include <asm/unistd.h>
+#include <asm/thread_info.h>
+#include <asm/errno.h>
+#include <asm/setup.h>
+#include <asm/segment.h>
+#include <asm/asm-offsets.h>
+#include <asm/entry.h>
+
+#ifdef CONFIG_COLDFIRE_SW_A7
+/*
+ *	Define software copies of the supervisor and user stack pointers.
+ */
+.bss
+sw_ksp:
+.long	0
+sw_usp:
+.long	0
+#endif /* CONFIG_COLDFIRE_SW_A7 */
+
+.text
+
+.globl system_call
+.globl resume
+.globl ret_from_exception
+.globl ret_from_signal
+.globl sys_call_table
+.globl inthandler
+
+enosys:
+	mov.l	#sys_ni_syscall,%d3
+	bra	1f
+
+ENTRY(system_call)
+	SAVE_ALL_SYS
+	move	#0x2000,%sr		/* enable intrs again */
+	GET_CURRENT(%d2)
+
+	cmpl	#NR_syscalls,%d0
+	jcc	enosys
+	lea	sys_call_table,%a0
+	lsll	#2,%d0			/* movel %a0@(%d0:l:4),%d3 */
+	movel	%a0@(%d0),%d3
+	jeq	enosys
+
+1:
+	movel	%sp,%d2			/* get thread_info pointer */
+	andl	#-THREAD_SIZE,%d2	/* at start of kernel stack */
+	movel	%d2,%a0
+	movel	%a0@,%a1		/* save top of frame */
+	movel	%sp,%a1@(TASK_THREAD+THREAD_ESP0)
+	btst	#(TIF_SYSCALL_TRACE%8),%a0@(TINFO_FLAGS+(31-TIF_SYSCALL_TRACE)/8)
+	bnes	1f
+
+	movel	%d3,%a0
+	jbsr	%a0@
+	movel	%d0,%sp@(PT_OFF_D0)	/* save the return value */
+	jra	ret_from_exception
+1:
+	movel	#-ENOSYS,%d2		/* strace needs -ENOSYS in PT_OFF_D0 */
+	movel	%d2,PT_OFF_D0(%sp)	/* on syscall entry */
+	subql	#4,%sp
+	SAVE_SWITCH_STACK
+	jbsr	syscall_trace_enter
+	RESTORE_SWITCH_STACK
+	addql	#4,%sp
+	movel	%d3,%a0
+	jbsr	%a0@
+	movel	%d0,%sp@(PT_OFF_D0)		/* save the return value */
+	subql	#4,%sp			/* dummy return address */
+	SAVE_SWITCH_STACK
+	jbsr	syscall_trace_leave
+
+ret_from_signal:
+	RESTORE_SWITCH_STACK
+	addql	#4,%sp
+
+ret_from_exception:
+	move	#0x2700,%sr		/* disable intrs */
+	btst	#5,%sp@(PT_OFF_SR)	/* check if returning to kernel */
+	jeq	Luser_return		/* if so, skip resched, signals */
+
+#ifdef CONFIG_PREEMPT
+	movel	%sp,%d1			/* get thread_info pointer */
+	andl	#-THREAD_SIZE,%d1	/* at base of kernel stack */
+	movel	%d1,%a0
+	movel	%a0@(TINFO_FLAGS),%d1	/* get thread_info->flags */
+	andl	#(1<<TIF_NEED_RESCHED),%d1
+	jeq	Lkernel_return
+
+	movel	%a0@(TINFO_PREEMPT),%d1
+	cmpl	#0,%d1
+	jne	Lkernel_return
+
+	pea	Lkernel_return
+	jmp	preempt_schedule_irq	/* preempt the kernel */
+#endif
+
+Lkernel_return:
+	moveml	%sp@,%d1-%d5/%a0-%a2
+	lea	%sp@(32),%sp		/* space for 8 regs */
+	movel	%sp@+,%d0
+	addql	#4,%sp			/* orig d0 */
+	addl	%sp@+,%sp		/* stk adj */
+	rte
+
+Luser_return:
+	movel	%sp,%d1			/* get thread_info pointer */
+	andl	#-THREAD_SIZE,%d1	/* at base of kernel stack */
+	movel	%d1,%a0
+	moveb	%a0@(TINFO_FLAGS+3),%d1	/* thread_info->flags (low 8 bits) */
+	jne	Lwork_to_do		/* still work to do */
+
+Lreturn:
+	RESTORE_USER
+
+Lwork_to_do:
+	movel	%a0@(TINFO_FLAGS),%d1	/* get thread_info->flags */
+	move	#0x2000,%sr		/* enable intrs again */
+	btst	#TIF_NEED_RESCHED,%d1
+	jne	reschedule
+
+Lsignal_return:
+	subql	#4,%sp			/* dummy return address */
+	SAVE_SWITCH_STACK
+	pea	%sp@(SWITCH_STACK_SIZE)
+	jsr	do_notify_resume
+	addql	#4,%sp
+	RESTORE_SWITCH_STACK
+	addql	#4,%sp
+	jmp	Luser_return
+
+/*
+ * This is the generic interrupt handler (for all hardware interrupt
+ * sources). Calls up to high level code to do all the work.
+ */
+ENTRY(inthandler)
+	SAVE_ALL_INT
+	GET_CURRENT(%d2)
+
+	movew	%sp@(PT_OFF_FORMATVEC),%d0 /* put exception # in d0 */
+	andl	#0x03fc,%d0		/* mask out vector only */
+
+	movel	%sp,%sp@-		/* push regs arg */
+	lsrl	#2,%d0			/* calculate real vector # */
+	movel	%d0,%sp@-		/* push vector number */
+	jbsr	do_IRQ			/* call high level irq handler */
+	lea	%sp@(8),%sp		/* pop args off stack */
+
+	bra	ret_from_exception
+
+/*
+ * Beware - when entering resume, prev (the current task) is
+ * in a0, next (the new task) is in a1, so don't change these
+ * registers until their contents are no longer needed.
+ */
+ENTRY(resume)
+	movew	%sr,%d1				 /* save current status */
+	movew	%d1,%a0@(TASK_THREAD+THREAD_SR)
+	movel	%a0,%d1				 /* get prev thread in d1 */
+	SAVE_SWITCH_STACK
+	movel	%sp,%a0@(TASK_THREAD+THREAD_KSP) /* save kernel stack pointer */
+	RDUSP					 /* movel %usp,%a3 */
+	movel	%a3,%a0@(TASK_THREAD+THREAD_USP) /* save thread user stack */
+#ifdef CONFIG_MMU
+	movel	%a1,%a2				 /* set new current */
+#endif
+	movel	%a1@(TASK_THREAD+THREAD_USP),%a3 /* restore thread user stack */
+	WRUSP					 /* movel %a3,%usp */
+	movel	%a1@(TASK_THREAD+THREAD_KSP),%sp /* restore new kernel stack */
+	movew	%a1@(TASK_THREAD+THREAD_SR),%d7	 /* restore new status */
+	movew	%d7,%sr
+	RESTORE_SWITCH_STACK
+	rts
+
diff --git a/arch/m68k/coldfire/firebee.c b/arch/m68k/coldfire/firebee.c
new file mode 100644
index 000000000..3b9d4fc6f
--- /dev/null
+++ b/arch/m68k/coldfire/firebee.c
@@ -0,0 +1,87 @@
+// SPDX-License-Identifier: GPL-2.0
+/***************************************************************************/
+
+/*
+ *	firebee.c -- extra startup code support for the FireBee boards
+ *
+ *	Copyright (C) 2011, Greg Ungerer (gerg@snapgear.com)
+ */
+
+/***************************************************************************/
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+
+/***************************************************************************/
+
+/*
+ *	8MB of NOR flash fitted to the FireBee board.
+ */
+#define	FLASH_PHYS_ADDR		0xe0000000	/* Physical address of flash */
+#define	FLASH_PHYS_SIZE		0x00800000	/* Size of flash */
+
+#define	PART_BOOT_START		0x00000000	/* Start at bottom of flash */
+#define	PART_BOOT_SIZE		0x00040000	/* 256k in size */
+#define	PART_IMAGE_START	0x00040000	/* Start after boot loader */
+#define	PART_IMAGE_SIZE		0x006c0000	/* Most of flash */
+#define	PART_FPGA_START		0x00700000	/* Start at offset 7MB */
+#define	PART_FPGA_SIZE		0x00100000	/* 1MB in size */
+
+static struct mtd_partition firebee_flash_parts[] = {
+	{
+		.name	= "dBUG",
+		.offset	= PART_BOOT_START,
+		.size	= PART_BOOT_SIZE,
+	},
+	{
+		.name	= "FPGA",
+		.offset	= PART_FPGA_START,
+		.size	= PART_FPGA_SIZE,
+	},
+	{
+		.name	= "image",
+		.offset	= PART_IMAGE_START,
+		.size	= PART_IMAGE_SIZE,
+	},
+};
+
+static struct physmap_flash_data firebee_flash_data = {
+	.width		= 2,
+	.nr_parts	= ARRAY_SIZE(firebee_flash_parts),
+	.parts		= firebee_flash_parts,
+};
+
+static struct resource firebee_flash_resource = {
+	.start		= FLASH_PHYS_ADDR,
+	.end		= FLASH_PHYS_ADDR + FLASH_PHYS_SIZE,
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device firebee_flash = {
+	.name		= "physmap-flash",
+	.id		= 0,
+	.dev		= {
+		.platform_data = &firebee_flash_data,
+	},
+	.num_resources	= 1,
+	.resource	= &firebee_flash_resource,
+};
+
+/***************************************************************************/
+
+static int __init init_firebee(void)
+{
+	platform_device_register(&firebee_flash);
+	return 0;
+}
+
+arch_initcall(init_firebee);
+
+/***************************************************************************/
diff --git a/arch/m68k/coldfire/gpio.c b/arch/m68k/coldfire/gpio.c
new file mode 100644
index 000000000..b515809be
--- /dev/null
+++ b/arch/m68k/coldfire/gpio.c
@@ -0,0 +1,180 @@
+/*
+ * Coldfire generic GPIO support.
+ *
+ * (C) Copyright 2009, Steven King <sfking@fdwdc.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/device.h>
+
+#include <linux/io.h>
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+#include <asm/mcfgpio.h>
+
+int __mcfgpio_get_value(unsigned gpio)
+{
+	return mcfgpio_read(__mcfgpio_ppdr(gpio)) & mcfgpio_bit(gpio);
+}
+EXPORT_SYMBOL(__mcfgpio_get_value);
+
+void __mcfgpio_set_value(unsigned gpio, int value)
+{
+	if (gpio < MCFGPIO_SCR_START) {
+		unsigned long flags;
+		MCFGPIO_PORTTYPE data;
+
+		local_irq_save(flags);
+		data = mcfgpio_read(__mcfgpio_podr(gpio));
+		if (value)
+			data |= mcfgpio_bit(gpio);
+		else
+			data &= ~mcfgpio_bit(gpio);
+		mcfgpio_write(data, __mcfgpio_podr(gpio));
+		local_irq_restore(flags);
+	} else {
+		if (value)
+			mcfgpio_write(mcfgpio_bit(gpio),
+					MCFGPIO_SETR_PORT(gpio));
+		else
+			mcfgpio_write(~mcfgpio_bit(gpio),
+					MCFGPIO_CLRR_PORT(gpio));
+	}
+}
+EXPORT_SYMBOL(__mcfgpio_set_value);
+
+int __mcfgpio_direction_input(unsigned gpio)
+{
+	unsigned long flags;
+	MCFGPIO_PORTTYPE dir;
+
+	local_irq_save(flags);
+	dir = mcfgpio_read(__mcfgpio_pddr(gpio));
+	dir &= ~mcfgpio_bit(gpio);
+	mcfgpio_write(dir, __mcfgpio_pddr(gpio));
+	local_irq_restore(flags);
+
+	return 0;
+}
+EXPORT_SYMBOL(__mcfgpio_direction_input);
+
+int __mcfgpio_direction_output(unsigned gpio, int value)
+{
+	unsigned long flags;
+	MCFGPIO_PORTTYPE data;
+
+	local_irq_save(flags);
+	data = mcfgpio_read(__mcfgpio_pddr(gpio));
+	data |= mcfgpio_bit(gpio);
+	mcfgpio_write(data, __mcfgpio_pddr(gpio));
+
+	/* now set the data to output */
+	if (gpio < MCFGPIO_SCR_START) {
+		data = mcfgpio_read(__mcfgpio_podr(gpio));
+		if (value)
+			data |= mcfgpio_bit(gpio);
+		else
+			data &= ~mcfgpio_bit(gpio);
+		mcfgpio_write(data, __mcfgpio_podr(gpio));
+	} else {
+		 if (value)
+			mcfgpio_write(mcfgpio_bit(gpio),
+					MCFGPIO_SETR_PORT(gpio));
+		 else
+			 mcfgpio_write(~mcfgpio_bit(gpio),
+					 MCFGPIO_CLRR_PORT(gpio));
+	}
+	local_irq_restore(flags);
+	return 0;
+}
+EXPORT_SYMBOL(__mcfgpio_direction_output);
+
+int __mcfgpio_request(unsigned gpio)
+{
+	return 0;
+}
+EXPORT_SYMBOL(__mcfgpio_request);
+
+void __mcfgpio_free(unsigned gpio)
+{
+	__mcfgpio_direction_input(gpio);
+}
+EXPORT_SYMBOL(__mcfgpio_free);
+
+#ifdef CONFIG_GPIOLIB
+
+static int mcfgpio_direction_input(struct gpio_chip *chip, unsigned offset)
+{
+	return __mcfgpio_direction_input(offset);
+}
+
+static int mcfgpio_get_value(struct gpio_chip *chip, unsigned offset)
+{
+	return !!__mcfgpio_get_value(offset);
+}
+
+static int mcfgpio_direction_output(struct gpio_chip *chip, unsigned offset,
+				    int value)
+{
+	return __mcfgpio_direction_output(offset, value);
+}
+
+static void mcfgpio_set_value(struct gpio_chip *chip, unsigned offset,
+			      int value)
+{
+	__mcfgpio_set_value(offset, value);
+}
+
+static int mcfgpio_request(struct gpio_chip *chip, unsigned offset)
+{
+	return __mcfgpio_request(offset);
+}
+
+static void mcfgpio_free(struct gpio_chip *chip, unsigned offset)
+{
+	__mcfgpio_free(offset);
+}
+
+static int mcfgpio_to_irq(struct gpio_chip *chip, unsigned offset)
+{
+#if defined(MCFGPIO_IRQ_MIN)
+	if ((offset >= MCFGPIO_IRQ_MIN) && (offset < MCFGPIO_IRQ_MAX))
+#else
+	if (offset < MCFGPIO_IRQ_MAX)
+#endif
+		return MCFGPIO_IRQ_VECBASE + offset;
+	else
+		return -EINVAL;
+}
+
+static struct gpio_chip mcfgpio_chip = {
+	.label			= "mcfgpio",
+	.request		= mcfgpio_request,
+	.free			= mcfgpio_free,
+	.direction_input	= mcfgpio_direction_input,
+	.direction_output	= mcfgpio_direction_output,
+	.get			= mcfgpio_get_value,
+	.set			= mcfgpio_set_value,
+	.to_irq			= mcfgpio_to_irq,
+	.base			= 0,
+	.ngpio			= MCFGPIO_PIN_MAX,
+};
+
+static int __init mcfgpio_sysinit(void)
+{
+	return gpiochip_add_data(&mcfgpio_chip, NULL);
+}
+
+core_initcall(mcfgpio_sysinit);
+#endif
diff --git a/arch/m68k/coldfire/head.S b/arch/m68k/coldfire/head.S
new file mode 100644
index 000000000..c6d7fd28c
--- /dev/null
+++ b/arch/m68k/coldfire/head.S
@@ -0,0 +1,299 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*****************************************************************************/
+
+/*
+ *	head.S -- common startup code for ColdFire CPUs.
+ *
+ *	(C) Copyright 1999-2011, Greg Ungerer <gerg@snapgear.com>.
+ */
+
+/*****************************************************************************/
+
+#include <linux/linkage.h>
+#include <linux/init.h>
+#include <asm/asm-offsets.h>
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+#include <asm/mcfmmu.h>
+#include <asm/thread_info.h>
+
+/*****************************************************************************/
+
+/*
+ *	If we don't have a fixed memory size, then lets build in code
+ *	to auto detect the DRAM size. Obviously this is the preferred
+ *	method, and should work for most boards. It won't work for those
+ *	that do not have their RAM starting at address 0, and it only
+ *	works on SDRAM (not boards fitted with SRAM).
+ */
+#if CONFIG_RAMSIZE != 0
+.macro GET_MEM_SIZE
+	movel	#CONFIG_RAMSIZE,%d0	/* hard coded memory size */
+.endm
+
+#elif defined(CONFIG_M5206) || defined(CONFIG_M5206e) || \
+      defined(CONFIG_M5249) || defined(CONFIG_M525x) || \
+      defined(CONFIG_M527x) || defined(CONFIG_M528x) || \
+      defined(CONFIG_M5307) || defined(CONFIG_M5407)
+/*
+ *	Not all these devices have exactly the same DRAM controller,
+ *	but the DCMR register is virtually identical - give or take
+ *	a couple of bits. The only exception is the 5272 devices, their
+ *	DRAM controller is quite different.
+ */
+.macro GET_MEM_SIZE
+	movel	MCFSIM_DMR0,%d0		/* get mask for 1st bank */
+	btst	#0,%d0			/* check if region enabled */
+	beq	1f
+	andl	#0xfffc0000,%d0
+	beq	1f
+	addl	#0x00040000,%d0		/* convert mask to size */
+1:
+	movel	MCFSIM_DMR1,%d1		/* get mask for 2nd bank */
+	btst	#0,%d1			/* check if region enabled */
+	beq	2f
+	andl	#0xfffc0000,%d1
+	beq	2f
+	addl	#0x00040000,%d1
+	addl	%d1,%d0			/* total mem size in d0 */
+2:
+.endm
+
+#elif defined(CONFIG_M5272)
+.macro GET_MEM_SIZE
+	movel	MCFSIM_CSOR7,%d0	/* get SDRAM address mask */
+	andil	#0xfffff000,%d0		/* mask out chip select options */
+	negl	%d0			/* negate bits */
+.endm
+
+#elif defined(CONFIG_M520x)
+.macro GET_MEM_SIZE
+	clrl	%d0
+	movel	MCFSIM_SDCS0, %d2	/* Get SDRAM chip select 0 config */
+	andl	#0x1f, %d2		/* Get only the chip select size */
+	beq	3f			/* Check if it is enabled */
+	addql	#1, %d2			/* Form exponent */
+	moveql	#1, %d0
+	lsll	%d2, %d0		/* 2 ^ exponent */
+3:
+	movel	MCFSIM_SDCS1, %d2	/* Get SDRAM chip select 1 config */
+	andl	#0x1f, %d2		/* Get only the chip select size */
+	beq	4f			/* Check if it is enabled */
+	addql	#1, %d2			/* Form exponent */
+	moveql	#1, %d1
+	lsll	%d2, %d1		/* 2 ^ exponent */
+	addl	%d1, %d0		/* Total size of SDRAM in d0 */
+4:
+.endm
+
+#else
+#error "ERROR: I don't know how to probe your boards memory size?"
+#endif
+
+/*****************************************************************************/
+
+/*
+ *	Boards and platforms can do specific early hardware setup if
+ *	they need to. Most don't need this, define away if not required.
+ */
+#ifndef PLATFORM_SETUP
+#define	PLATFORM_SETUP
+#endif
+
+/*****************************************************************************/
+
+.global	_start
+.global _rambase
+.global _ramvec
+.global	_ramstart
+.global	_ramend
+#if defined(CONFIG_UBOOT)
+.global	_init_sp
+#endif
+
+/*****************************************************************************/
+
+.data
+
+/*
+ *	During startup we store away the RAM setup. These are not in the
+ *	bss, since their values are determined and written before the bss
+ *	has been cleared.
+ */
+_rambase:
+.long	0
+_ramvec:
+.long	0
+_ramstart:
+.long	0
+_ramend:
+.long	0
+#if defined(CONFIG_UBOOT)
+_init_sp:
+.long	0
+#endif
+
+/*****************************************************************************/
+
+__HEAD
+
+#ifdef CONFIG_MMU
+_start0:
+	jmp	_start
+.global kernel_pg_dir
+.equ	kernel_pg_dir,_start0
+.equ	.,_start0+0x1000
+#endif
+
+/*
+ *	This is the codes first entry point. This is where it all
+ *	begins...
+ */
+
+_start:
+	nop					/* filler */
+	movew	#0x2700, %sr			/* no interrupts */
+	movel	#CACHE_INIT,%d0			/* disable cache */
+	movec	%d0,%CACR
+	nop
+#if defined(CONFIG_UBOOT)
+	movel	%sp,_init_sp			/* save initial stack pointer */
+#endif
+#ifdef CONFIG_MBAR
+	movel	#CONFIG_MBAR+1,%d0		/* configured MBAR address */
+	movec	%d0,%MBAR			/* set it */
+#endif
+
+	/*
+	 *	Do any platform or board specific setup now. Most boards
+	 *	don't need anything. Those exceptions are define this in
+	 *	their board specific includes.
+	 */
+	PLATFORM_SETUP
+
+	/*
+	 *	Create basic memory configuration. Set VBR accordingly,
+	 *	and size memory.
+	 */
+	movel	#CONFIG_VECTORBASE,%a7
+	movec   %a7,%VBR			/* set vectors addr */
+	movel	%a7,_ramvec
+
+	movel	#CONFIG_RAMBASE,%a7		/* mark the base of RAM */
+	movel	%a7,_rambase
+
+	GET_MEM_SIZE				/* macro code determines size */
+	addl	%a7,%d0
+	movel	%d0,_ramend			/* set end ram addr */
+
+	/*
+	 *	Now that we know what the memory is, lets enable cache
+	 *	and get things moving. This is Coldfire CPU specific. Not
+	 *	all version cores have identical cache register setup. But
+	 *	it is very similar. Define the exact settings in the headers
+	 *	then the code here is the same for all.
+	 */
+	movel	#ACR0_MODE,%d0			/* set RAM region for caching */
+	movec	%d0,%ACR0
+	movel	#ACR1_MODE,%d0			/* anything else to cache? */
+	movec	%d0,%ACR1
+#ifdef ACR2_MODE
+	movel	#ACR2_MODE,%d0
+	movec	%d0,%ACR2
+	movel	#ACR3_MODE,%d0
+	movec	%d0,%ACR3
+#endif
+	movel	#CACHE_MODE,%d0			/* enable cache */
+	movec	%d0,%CACR
+	nop
+
+#ifdef CONFIG_MMU
+	/*
+	 *	Identity mapping for the kernel region.
+	 */
+	movel	#(MMUBASE+1),%d0		/* enable MMUBAR registers */
+	movec	%d0,%MMUBAR
+	movel	#MMUOR_CA,%d0			/* clear TLB entries */
+	movel	%d0,MMUOR
+	movel	#0,%d0				/* set ASID to 0 */
+	movec	%d0,%asid
+
+	movel	#MMUCR_EN,%d0			/* Enable the identity map */
+	movel	%d0,MMUCR
+	nop					/* sync i-pipeline */
+
+	movel	#_vstart,%a0			/* jump to "virtual" space */
+	jmp	%a0@
+_vstart:
+#endif /* CONFIG_MMU */
+
+#ifdef CONFIG_ROMFS_FS
+	/*
+	 *	Move ROM filesystem above bss :-)
+	 */
+	lea	__bss_start,%a0			/* get start of bss */
+	lea	__bss_stop,%a1			/* set up destination  */
+	movel	%a0,%a2				/* copy of bss start */
+
+	movel	8(%a0),%d0			/* get size of ROMFS */
+	addql	#8,%d0				/* allow for rounding */
+	andl	#0xfffffffc, %d0		/* whole words */
+
+	addl	%d0,%a0				/* copy from end */
+	addl	%d0,%a1				/* copy from end */
+	movel	%a1,_ramstart			/* set start of ram */
+
+_copy_romfs:
+	movel	-(%a0),%d0			/* copy dword */
+	movel	%d0,-(%a1)
+	cmpl	%a0,%a2				/* check if at end */
+	bne	_copy_romfs
+
+#else /* CONFIG_ROMFS_FS */
+	lea	__bss_stop,%a1
+	movel	%a1,_ramstart
+#endif /* CONFIG_ROMFS_FS */
+
+
+	/*
+	 *	Zero out the bss region.
+	 */
+	lea	__bss_start,%a0			/* get start of bss */
+	lea	__bss_stop,%a1			/* get end of bss */
+	clrl	%d0				/* set value */
+_clear_bss:
+	movel	%d0,(%a0)+			/* clear each word */
+	cmpl	%a0,%a1				/* check if at end */
+	bne	_clear_bss
+
+	/*
+	 *	Load the current task pointer and stack.
+	 */
+	lea	init_thread_union,%a0
+	lea	THREAD_SIZE(%a0),%sp
+
+#ifdef CONFIG_MMU
+.global m68k_cputype
+.global m68k_mmutype
+.global m68k_fputype
+.global m68k_machtype
+	movel	#CPU_COLDFIRE,%d0
+	movel	%d0,m68k_cputype		/* Mark us as a ColdFire */
+	movel	#MMU_COLDFIRE,%d0
+	movel	%d0,m68k_mmutype
+	movel	#FPUTYPE,%d0
+	movel	%d0,m68k_fputype		/* Mark FPU type */
+	movel	#MACHINE,%d0
+	movel	%d0,m68k_machtype		/* Mark machine type */
+	lea	init_task,%a2			/* Set "current" init task */
+#endif
+
+	/*
+	 *	Assembler start up done, start code proper.
+	 */
+	jsr	start_kernel			/* start Linux kernel */
+
+_exit:
+	jmp	_exit				/* should never get here */
+
+/*****************************************************************************/
diff --git a/arch/m68k/coldfire/intc-2.c b/arch/m68k/coldfire/intc-2.c
new file mode 100644
index 000000000..995093357
--- /dev/null
+++ b/arch/m68k/coldfire/intc-2.c
@@ -0,0 +1,212 @@
+/*
+ * intc-2.c
+ *
+ * General interrupt controller code for the many ColdFire cores that use
+ * interrupt controllers with 63 interrupt sources, organized as 56 fully-
+ * programmable + 7 fixed-level interrupt sources. This includes the 523x
+ * family, the 5270, 5271, 5274, 5275, and the 528x family which have two such
+ * controllers, and the 547x and 548x families which have only one of them.
+ *
+ * The external 7 fixed interrupts are part the the Edge Port unit of these
+ * ColdFire parts. They can be configured as level or edge triggered.
+ *
+ * (C) Copyright 2009-2011, Greg Ungerer <gerg@snapgear.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file COPYING in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+#include <asm/traps.h>
+
+/*
+ * Bit definitions for the ICR family of registers.
+ */
+#define MCFSIM_ICR_LEVEL(l)	((l)<<3)	/* Level l intr */
+#define MCFSIM_ICR_PRI(p)	(p)		/* Priority p intr */
+
+/*
+ *	The EDGE Port interrupts are the fixed 7 external interrupts.
+ *	They need some special treatment, for example they need to be acked.
+ */
+#define	EINT0	64	/* Is not actually used, but spot reserved for it */
+#define	EINT1	65	/* EDGE Port interrupt 1 */
+#define	EINT7	71	/* EDGE Port interrupt 7 */
+
+#ifdef MCFICM_INTC1
+#define NR_VECS	128
+#else
+#define NR_VECS	64
+#endif
+
+static void intc_irq_mask(struct irq_data *d)
+{
+	unsigned int irq = d->irq - MCFINT_VECBASE;
+	unsigned long imraddr;
+	u32 val, imrbit;
+
+#ifdef MCFICM_INTC1
+	imraddr = (irq & 0x40) ? MCFICM_INTC1 : MCFICM_INTC0;
+#else
+	imraddr = MCFICM_INTC0;
+#endif
+	imraddr += (irq & 0x20) ? MCFINTC_IMRH : MCFINTC_IMRL;
+	imrbit = 0x1 << (irq & 0x1f);
+
+	val = __raw_readl(imraddr);
+	__raw_writel(val | imrbit, imraddr);
+}
+
+static void intc_irq_unmask(struct irq_data *d)
+{
+	unsigned int irq = d->irq - MCFINT_VECBASE;
+	unsigned long imraddr;
+	u32 val, imrbit;
+
+#ifdef MCFICM_INTC1
+	imraddr = (irq & 0x40) ? MCFICM_INTC1 : MCFICM_INTC0;
+#else
+	imraddr = MCFICM_INTC0;
+#endif
+	imraddr += ((irq & 0x20) ? MCFINTC_IMRH : MCFINTC_IMRL);
+	imrbit = 0x1 << (irq & 0x1f);
+
+	/* Don't set the "maskall" bit! */
+	if ((irq & 0x20) == 0)
+		imrbit |= 0x1;
+
+	val = __raw_readl(imraddr);
+	__raw_writel(val & ~imrbit, imraddr);
+}
+
+/*
+ *	Only the external (or EDGE Port) interrupts need to be acknowledged
+ *	here, as part of the IRQ handler. They only really need to be ack'ed
+ *	if they are in edge triggered mode, but there is no harm in doing it
+ *	for all types.
+ */
+static void intc_irq_ack(struct irq_data *d)
+{
+	unsigned int irq = d->irq;
+
+	__raw_writeb(0x1 << (irq - EINT0), MCFEPORT_EPFR);
+}
+
+/*
+ *	Each vector needs a unique priority and level associated with it.
+ *	We don't really care so much what they are, we don't rely on the
+ *	traditional priority interrupt scheme of the m68k/ColdFire. This
+ *	only needs to be set once for an interrupt, and we will never change
+ *	these values once we have set them.
+ */
+static u8 intc_intpri = MCFSIM_ICR_LEVEL(6) | MCFSIM_ICR_PRI(6);
+
+static unsigned int intc_irq_startup(struct irq_data *d)
+{
+	unsigned int irq = d->irq - MCFINT_VECBASE;
+	unsigned long icraddr;
+
+#ifdef MCFICM_INTC1
+	icraddr = (irq & 0x40) ? MCFICM_INTC1 : MCFICM_INTC0;
+#else
+	icraddr = MCFICM_INTC0;
+#endif
+	icraddr += MCFINTC_ICR0 + (irq & 0x3f);
+	if (__raw_readb(icraddr) == 0)
+		__raw_writeb(intc_intpri--, icraddr);
+
+	irq = d->irq;
+	if ((irq >= EINT1) && (irq <= EINT7)) {
+		u8 v;
+
+		irq -= EINT0;
+
+		/* Set EPORT line as input */
+		v = __raw_readb(MCFEPORT_EPDDR);
+		__raw_writeb(v & ~(0x1 << irq), MCFEPORT_EPDDR);
+
+		/* Set EPORT line as interrupt source */
+		v = __raw_readb(MCFEPORT_EPIER);
+		__raw_writeb(v | (0x1 << irq), MCFEPORT_EPIER);
+	}
+
+	intc_irq_unmask(d);
+	return 0;
+}
+
+static int intc_irq_set_type(struct irq_data *d, unsigned int type)
+{
+	unsigned int irq = d->irq;
+	u16 pa, tb;
+
+	switch (type) {
+	case IRQ_TYPE_EDGE_RISING:
+		tb = 0x1;
+		break;
+	case IRQ_TYPE_EDGE_FALLING:
+		tb = 0x2;
+		break;
+	case IRQ_TYPE_EDGE_BOTH:
+		tb = 0x3;
+		break;
+	default:
+		/* Level triggered */
+		tb = 0;
+		break;
+	}
+
+	if (tb)
+		irq_set_handler(irq, handle_edge_irq);
+
+	irq -= EINT0;
+	pa = __raw_readw(MCFEPORT_EPPAR);
+	pa = (pa & ~(0x3 << (irq * 2))) | (tb << (irq * 2));
+	__raw_writew(pa, MCFEPORT_EPPAR);
+	
+	return 0;
+}
+
+static struct irq_chip intc_irq_chip = {
+	.name		= "CF-INTC",
+	.irq_startup	= intc_irq_startup,
+	.irq_mask	= intc_irq_mask,
+	.irq_unmask	= intc_irq_unmask,
+};
+
+static struct irq_chip intc_irq_chip_edge_port = {
+	.name		= "CF-INTC-EP",
+	.irq_startup	= intc_irq_startup,
+	.irq_mask	= intc_irq_mask,
+	.irq_unmask	= intc_irq_unmask,
+	.irq_ack	= intc_irq_ack,
+	.irq_set_type	= intc_irq_set_type,
+};
+
+void __init init_IRQ(void)
+{
+	int irq;
+
+	/* Mask all interrupt sources */
+	__raw_writel(0x1, MCFICM_INTC0 + MCFINTC_IMRL);
+#ifdef MCFICM_INTC1
+	__raw_writel(0x1, MCFICM_INTC1 + MCFINTC_IMRL);
+#endif
+
+	for (irq = MCFINT_VECBASE; (irq < MCFINT_VECBASE + NR_VECS); irq++) {
+		if ((irq >= EINT1) && (irq <=EINT7))
+			irq_set_chip(irq, &intc_irq_chip_edge_port);
+		else
+			irq_set_chip(irq, &intc_irq_chip);
+		irq_set_irq_type(irq, IRQ_TYPE_LEVEL_HIGH);
+		irq_set_handler(irq, handle_level_irq);
+	}
+}
+
diff --git a/arch/m68k/coldfire/intc-5249.c b/arch/m68k/coldfire/intc-5249.c
new file mode 100644
index 000000000..b0d164105
--- /dev/null
+++ b/arch/m68k/coldfire/intc-5249.c
@@ -0,0 +1,61 @@
+/*
+ * intc2.c  -- support for the 2nd INTC controller of the 5249
+ *
+ * (C) Copyright 2009, Greg Ungerer <gerg@snapgear.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file COPYING in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+
+static void intc2_irq_gpio_mask(struct irq_data *d)
+{
+	u32 imr;
+	imr = readl(MCFSIM2_GPIOINTENABLE);
+	imr &= ~(0x1 << (d->irq - MCF_IRQ_GPIO0));
+	writel(imr, MCFSIM2_GPIOINTENABLE);
+}
+
+static void intc2_irq_gpio_unmask(struct irq_data *d)
+{
+	u32 imr;
+	imr = readl(MCFSIM2_GPIOINTENABLE);
+	imr |= (0x1 << (d->irq - MCF_IRQ_GPIO0));
+	writel(imr, MCFSIM2_GPIOINTENABLE);
+}
+
+static void intc2_irq_gpio_ack(struct irq_data *d)
+{
+	writel(0x1 << (d->irq - MCF_IRQ_GPIO0), MCFSIM2_GPIOINTCLEAR);
+}
+
+static struct irq_chip intc2_irq_gpio_chip = {
+	.name		= "CF-INTC2",
+	.irq_mask	= intc2_irq_gpio_mask,
+	.irq_unmask	= intc2_irq_gpio_unmask,
+	.irq_ack	= intc2_irq_gpio_ack,
+};
+
+static int __init mcf_intc2_init(void)
+{
+	int irq;
+
+	/* GPIO interrupt sources */
+	for (irq = MCF_IRQ_GPIO0; (irq <= MCF_IRQ_GPIO7); irq++) {
+		irq_set_chip(irq, &intc2_irq_gpio_chip);
+		irq_set_handler(irq, handle_edge_irq);
+	}
+
+	return 0;
+}
+
+arch_initcall(mcf_intc2_init);
diff --git a/arch/m68k/coldfire/intc-525x.c b/arch/m68k/coldfire/intc-525x.c
new file mode 100644
index 000000000..b23204d05
--- /dev/null
+++ b/arch/m68k/coldfire/intc-525x.c
@@ -0,0 +1,91 @@
+/*
+ * intc2.c  -- support for the 2nd INTC controller of the 525x
+ *
+ * (C) Copyright 2012, Steven King <sfking@fdwdc.com>
+ * (C) Copyright 2009, Greg Ungerer <gerg@snapgear.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file COPYING in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+
+static void intc2_irq_gpio_mask(struct irq_data *d)
+{
+	u32 imr = readl(MCFSIM2_GPIOINTENABLE);
+	u32 type = irqd_get_trigger_type(d);
+	int irq = d->irq - MCF_IRQ_GPIO0;
+
+	if (type & IRQ_TYPE_EDGE_RISING)
+		imr &= ~(0x001 << irq);
+	if (type & IRQ_TYPE_EDGE_FALLING)
+		imr &= ~(0x100 << irq);
+	writel(imr, MCFSIM2_GPIOINTENABLE);
+}
+
+static void intc2_irq_gpio_unmask(struct irq_data *d)
+{
+	u32 imr = readl(MCFSIM2_GPIOINTENABLE);
+	u32 type = irqd_get_trigger_type(d);
+	int irq = d->irq - MCF_IRQ_GPIO0;
+
+	if (type & IRQ_TYPE_EDGE_RISING)
+		imr |= (0x001 << irq);
+	if (type & IRQ_TYPE_EDGE_FALLING)
+		imr |= (0x100 << irq);
+	writel(imr, MCFSIM2_GPIOINTENABLE);
+}
+
+static void intc2_irq_gpio_ack(struct irq_data *d)
+{
+	u32 imr = 0;
+	u32 type = irqd_get_trigger_type(d);
+	int irq = d->irq - MCF_IRQ_GPIO0;
+
+	if (type & IRQ_TYPE_EDGE_RISING)
+		imr |= (0x001 << irq);
+	if (type & IRQ_TYPE_EDGE_FALLING)
+		imr |= (0x100 << irq);
+	writel(imr, MCFSIM2_GPIOINTCLEAR);
+}
+
+static int intc2_irq_gpio_set_type(struct irq_data *d, unsigned int f)
+{
+	if (f & ~IRQ_TYPE_EDGE_BOTH)
+		return -EINVAL;
+	return 0;
+}
+
+static struct irq_chip intc2_irq_gpio_chip = {
+	.name		= "CF-INTC2",
+	.irq_mask	= intc2_irq_gpio_mask,
+	.irq_unmask	= intc2_irq_gpio_unmask,
+	.irq_ack	= intc2_irq_gpio_ack,
+	.irq_set_type	= intc2_irq_gpio_set_type,
+};
+
+static int __init mcf_intc2_init(void)
+{
+	int irq;
+
+	/* set the interrupt base for the second interrupt controller */
+	writel(MCFINTC2_VECBASE, MCFINTC2_INTBASE);
+
+	/* GPIO interrupt sources */
+	for (irq = MCF_IRQ_GPIO0; (irq <= MCF_IRQ_GPIO6); irq++) {
+		irq_set_chip(irq, &intc2_irq_gpio_chip);
+		irq_set_handler(irq, handle_edge_irq);
+	}
+
+	return 0;
+}
+
+arch_initcall(mcf_intc2_init);
diff --git a/arch/m68k/coldfire/intc-5272.c b/arch/m68k/coldfire/intc-5272.c
new file mode 100644
index 000000000..b0a19e207
--- /dev/null
+++ b/arch/m68k/coldfire/intc-5272.c
@@ -0,0 +1,185 @@
+/*
+ * intc.c  --  interrupt controller or ColdFire 5272 SoC
+ *
+ * (C) Copyright 2009, Greg Ungerer <gerg@snapgear.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file COPYING in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/kernel_stat.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+#include <asm/traps.h>
+
+/*
+ * The 5272 ColdFire interrupt controller is nothing like any other
+ * ColdFire interrupt controller - it truly is completely different.
+ * Given its age it is unlikely to be used on any other ColdFire CPU.
+ */
+
+/*
+ * The masking and priproty setting of interrupts on the 5272 is done
+ * via a set of 4 "Interrupt Controller Registers" (ICR). There is a
+ * loose mapping of vector number to register and internal bits, but
+ * a table is the easiest and quickest way to map them.
+ *
+ * Note that the external interrupts are edge triggered (unlike the
+ * internal interrupt sources which are level triggered). Which means
+ * they also need acknowledging via acknowledge bits.
+ */
+struct irqmap {
+	unsigned int	icr;
+	unsigned char	index;
+	unsigned char	ack;
+};
+
+static struct irqmap intc_irqmap[MCFINT_VECMAX - MCFINT_VECBASE] = {
+	/*MCF_IRQ_SPURIOUS*/	{ .icr = 0,           .index = 0,  .ack = 0, },
+	/*MCF_IRQ_EINT1*/	{ .icr = MCFSIM_ICR1, .index = 28, .ack = 1, },
+	/*MCF_IRQ_EINT2*/	{ .icr = MCFSIM_ICR1, .index = 24, .ack = 1, },
+	/*MCF_IRQ_EINT3*/	{ .icr = MCFSIM_ICR1, .index = 20, .ack = 1, },
+	/*MCF_IRQ_EINT4*/	{ .icr = MCFSIM_ICR1, .index = 16, .ack = 1, },
+	/*MCF_IRQ_TIMER1*/	{ .icr = MCFSIM_ICR1, .index = 12, .ack = 0, },
+	/*MCF_IRQ_TIMER2*/	{ .icr = MCFSIM_ICR1, .index = 8,  .ack = 0, },
+	/*MCF_IRQ_TIMER3*/	{ .icr = MCFSIM_ICR1, .index = 4,  .ack = 0, },
+	/*MCF_IRQ_TIMER4*/	{ .icr = MCFSIM_ICR1, .index = 0,  .ack = 0, },
+	/*MCF_IRQ_UART1*/	{ .icr = MCFSIM_ICR2, .index = 28, .ack = 0, },
+	/*MCF_IRQ_UART2*/	{ .icr = MCFSIM_ICR2, .index = 24, .ack = 0, },
+	/*MCF_IRQ_PLIP*/	{ .icr = MCFSIM_ICR2, .index = 20, .ack = 0, },
+	/*MCF_IRQ_PLIA*/	{ .icr = MCFSIM_ICR2, .index = 16, .ack = 0, },
+	/*MCF_IRQ_USB0*/	{ .icr = MCFSIM_ICR2, .index = 12, .ack = 0, },
+	/*MCF_IRQ_USB1*/	{ .icr = MCFSIM_ICR2, .index = 8,  .ack = 0, },
+	/*MCF_IRQ_USB2*/	{ .icr = MCFSIM_ICR2, .index = 4,  .ack = 0, },
+	/*MCF_IRQ_USB3*/	{ .icr = MCFSIM_ICR2, .index = 0,  .ack = 0, },
+	/*MCF_IRQ_USB4*/	{ .icr = MCFSIM_ICR3, .index = 28, .ack = 0, },
+	/*MCF_IRQ_USB5*/	{ .icr = MCFSIM_ICR3, .index = 24, .ack = 0, },
+	/*MCF_IRQ_USB6*/	{ .icr = MCFSIM_ICR3, .index = 20, .ack = 0, },
+	/*MCF_IRQ_USB7*/	{ .icr = MCFSIM_ICR3, .index = 16, .ack = 0, },
+	/*MCF_IRQ_DMA*/		{ .icr = MCFSIM_ICR3, .index = 12, .ack = 0, },
+	/*MCF_IRQ_ERX*/		{ .icr = MCFSIM_ICR3, .index = 8,  .ack = 0, },
+	/*MCF_IRQ_ETX*/		{ .icr = MCFSIM_ICR3, .index = 4,  .ack = 0, },
+	/*MCF_IRQ_ENTC*/	{ .icr = MCFSIM_ICR3, .index = 0,  .ack = 0, },
+	/*MCF_IRQ_QSPI*/	{ .icr = MCFSIM_ICR4, .index = 28, .ack = 0, },
+	/*MCF_IRQ_EINT5*/	{ .icr = MCFSIM_ICR4, .index = 24, .ack = 1, },
+	/*MCF_IRQ_EINT6*/	{ .icr = MCFSIM_ICR4, .index = 20, .ack = 1, },
+	/*MCF_IRQ_SWTO*/	{ .icr = MCFSIM_ICR4, .index = 16, .ack = 0, },
+};
+
+/*
+ * The act of masking the interrupt also has a side effect of 'ack'ing
+ * an interrupt on this irq (for the external irqs). So this mask function
+ * is also an ack_mask function.
+ */
+static void intc_irq_mask(struct irq_data *d)
+{
+	unsigned int irq = d->irq;
+
+	if ((irq >= MCFINT_VECBASE) && (irq <= MCFINT_VECMAX)) {
+		u32 v;
+		irq -= MCFINT_VECBASE;
+		v = 0x8 << intc_irqmap[irq].index;
+		writel(v, intc_irqmap[irq].icr);
+	}
+}
+
+static void intc_irq_unmask(struct irq_data *d)
+{
+	unsigned int irq = d->irq;
+
+	if ((irq >= MCFINT_VECBASE) && (irq <= MCFINT_VECMAX)) {
+		u32 v;
+		irq -= MCFINT_VECBASE;
+		v = 0xd << intc_irqmap[irq].index;
+		writel(v, intc_irqmap[irq].icr);
+	}
+}
+
+static void intc_irq_ack(struct irq_data *d)
+{
+	unsigned int irq = d->irq;
+
+	/* Only external interrupts are acked */
+	if ((irq >= MCFINT_VECBASE) && (irq <= MCFINT_VECMAX)) {
+		irq -= MCFINT_VECBASE;
+		if (intc_irqmap[irq].ack) {
+			u32 v;
+			v = readl(intc_irqmap[irq].icr);
+			v &= (0x7 << intc_irqmap[irq].index);
+			v |= (0x8 << intc_irqmap[irq].index);
+			writel(v, intc_irqmap[irq].icr);
+		}
+	}
+}
+
+static int intc_irq_set_type(struct irq_data *d, unsigned int type)
+{
+	unsigned int irq = d->irq;
+
+	if ((irq >= MCFINT_VECBASE) && (irq <= MCFINT_VECMAX)) {
+		irq -= MCFINT_VECBASE;
+		if (intc_irqmap[irq].ack) {
+			u32 v;
+			v = readl(MCFSIM_PITR);
+			if (type == IRQ_TYPE_EDGE_FALLING)
+				v &= ~(0x1 << (32 - irq));
+			else
+				v |= (0x1 << (32 - irq));
+			writel(v, MCFSIM_PITR);
+		}
+	}
+	return 0;
+}
+
+/*
+ * Simple flow handler to deal with the external edge triggered interrupts.
+ * We need to be careful with the masking/acking due to the side effects
+ * of masking an interrupt.
+ */
+static void intc_external_irq(struct irq_desc *desc)
+{
+	irq_desc_get_chip(desc)->irq_ack(&desc->irq_data);
+	handle_simple_irq(desc);
+}
+
+static struct irq_chip intc_irq_chip = {
+	.name		= "CF-INTC",
+	.irq_mask	= intc_irq_mask,
+	.irq_unmask	= intc_irq_unmask,
+	.irq_mask_ack	= intc_irq_mask,
+	.irq_ack	= intc_irq_ack,
+	.irq_set_type	= intc_irq_set_type,
+};
+
+void __init init_IRQ(void)
+{
+	int irq, edge;
+
+	/* Mask all interrupt sources */
+	writel(0x88888888, MCFSIM_ICR1);
+	writel(0x88888888, MCFSIM_ICR2);
+	writel(0x88888888, MCFSIM_ICR3);
+	writel(0x88888888, MCFSIM_ICR4);
+
+	for (irq = 0; (irq < NR_IRQS); irq++) {
+		irq_set_chip(irq, &intc_irq_chip);
+		edge = 0;
+		if ((irq >= MCFINT_VECBASE) && (irq <= MCFINT_VECMAX))
+			edge = intc_irqmap[irq - MCFINT_VECBASE].ack;
+		if (edge) {
+			irq_set_irq_type(irq, IRQ_TYPE_EDGE_RISING);
+			irq_set_handler(irq, intc_external_irq);
+		} else {
+			irq_set_irq_type(irq, IRQ_TYPE_LEVEL_HIGH);
+			irq_set_handler(irq, handle_level_irq);
+		}
+	}
+}
+
diff --git a/arch/m68k/coldfire/intc-simr.c b/arch/m68k/coldfire/intc-simr.c
new file mode 100644
index 000000000..15c4b7a6e
--- /dev/null
+++ b/arch/m68k/coldfire/intc-simr.c
@@ -0,0 +1,199 @@
+/*
+ * intc-simr.c
+ *
+ * Interrupt controller code for the ColdFire 5208, 5207 & 532x parts.
+ *
+ * (C) Copyright 2009-2011, Greg Ungerer <gerg@snapgear.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file COPYING in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+#include <asm/traps.h>
+
+/*
+ *	The EDGE Port interrupts are the fixed 7 external interrupts.
+ *	They need some special treatment, for example they need to be acked.
+ */
+#ifdef CONFIG_M520x
+/*
+ *	The 520x parts only support a limited range of these external
+ *	interrupts, only 1, 4 and 7 (as interrupts 65, 66 and 67).
+ */
+#define	EINT0	64	/* Is not actually used, but spot reserved for it */
+#define	EINT1	65	/* EDGE Port interrupt 1 */
+#define	EINT4	66	/* EDGE Port interrupt 4 */
+#define	EINT7	67	/* EDGE Port interrupt 7 */
+
+static unsigned int irqebitmap[] = { 0, 1, 4, 7 };
+static inline unsigned int irq2ebit(unsigned int irq)
+{
+	return irqebitmap[irq - EINT0];
+}
+
+#else
+
+/*
+ *	Most of the ColdFire parts with the EDGE Port module just have
+ *	a strait direct mapping of the 7 external interrupts. Although
+ *	there is a bit reserved for 0, it is not used.
+ */
+#define	EINT0	64	/* Is not actually used, but spot reserved for it */
+#define	EINT1	65	/* EDGE Port interrupt 1 */
+#define	EINT7	71	/* EDGE Port interrupt 7 */
+
+static inline unsigned int irq2ebit(unsigned int irq)
+{
+	return irq - EINT0;
+}
+
+#endif
+
+/*
+ *	There maybe one, two or three interrupt control units, each has 64
+ *	interrupts. If there is no second or third unit then MCFINTC1_* or
+ *	MCFINTC2_* defines will be 0 (and code for them optimized away).
+ */
+
+static void intc_irq_mask(struct irq_data *d)
+{
+	unsigned int irq = d->irq - MCFINT_VECBASE;
+
+	if (MCFINTC2_SIMR && (irq > 128))
+		__raw_writeb(irq - 128, MCFINTC2_SIMR);
+	else if (MCFINTC1_SIMR && (irq > 64))
+		__raw_writeb(irq - 64, MCFINTC1_SIMR);
+	else
+		__raw_writeb(irq, MCFINTC0_SIMR);
+}
+
+static void intc_irq_unmask(struct irq_data *d)
+{
+	unsigned int irq = d->irq - MCFINT_VECBASE;
+
+	if (MCFINTC2_CIMR && (irq > 128))
+		__raw_writeb(irq - 128, MCFINTC2_CIMR);
+	else if (MCFINTC1_CIMR && (irq > 64))
+		__raw_writeb(irq - 64, MCFINTC1_CIMR);
+	else
+		__raw_writeb(irq, MCFINTC0_CIMR);
+}
+
+static void intc_irq_ack(struct irq_data *d)
+{
+	unsigned int ebit = irq2ebit(d->irq);
+
+	__raw_writeb(0x1 << ebit, MCFEPORT_EPFR);
+}
+
+static unsigned int intc_irq_startup(struct irq_data *d)
+{
+	unsigned int irq = d->irq;
+
+	if ((irq >= EINT1) && (irq <= EINT7)) {
+		unsigned int ebit = irq2ebit(irq);
+		u8 v;
+
+#if defined(MCFEPORT_EPDDR)
+		/* Set EPORT line as input */
+		v = __raw_readb(MCFEPORT_EPDDR);
+		__raw_writeb(v & ~(0x1 << ebit), MCFEPORT_EPDDR);
+#endif
+
+		/* Set EPORT line as interrupt source */
+		v = __raw_readb(MCFEPORT_EPIER);
+		__raw_writeb(v | (0x1 << ebit), MCFEPORT_EPIER);
+	}
+
+	irq -= MCFINT_VECBASE;
+	if (MCFINTC2_ICR0 && (irq > 128))
+		__raw_writeb(5, MCFINTC2_ICR0 + irq - 128);
+	else if (MCFINTC1_ICR0 && (irq > 64))
+		__raw_writeb(5, MCFINTC1_ICR0 + irq - 64);
+	else
+		__raw_writeb(5, MCFINTC0_ICR0 + irq);
+
+	intc_irq_unmask(d);
+	return 0;
+}
+
+static int intc_irq_set_type(struct irq_data *d, unsigned int type)
+{
+	unsigned int ebit, irq = d->irq;
+	u16 pa, tb;
+
+	switch (type) {
+	case IRQ_TYPE_EDGE_RISING:
+		tb = 0x1;
+		break;
+	case IRQ_TYPE_EDGE_FALLING:
+		tb = 0x2;
+		break;
+	case IRQ_TYPE_EDGE_BOTH:
+		tb = 0x3;
+		break;
+	default:
+		/* Level triggered */
+		tb = 0;
+		break;
+	}
+
+	if (tb)
+		irq_set_handler(irq, handle_edge_irq);
+
+	ebit = irq2ebit(irq) * 2;
+	pa = __raw_readw(MCFEPORT_EPPAR);
+	pa = (pa & ~(0x3 << ebit)) | (tb << ebit);
+	__raw_writew(pa, MCFEPORT_EPPAR);
+	
+	return 0;
+}
+
+static struct irq_chip intc_irq_chip = {
+	.name		= "CF-INTC",
+	.irq_startup	= intc_irq_startup,
+	.irq_mask	= intc_irq_mask,
+	.irq_unmask	= intc_irq_unmask,
+};
+
+static struct irq_chip intc_irq_chip_edge_port = {
+	.name		= "CF-INTC-EP",
+	.irq_startup	= intc_irq_startup,
+	.irq_mask	= intc_irq_mask,
+	.irq_unmask	= intc_irq_unmask,
+	.irq_ack	= intc_irq_ack,
+	.irq_set_type	= intc_irq_set_type,
+};
+
+void __init init_IRQ(void)
+{
+	int irq, eirq;
+
+	/* Mask all interrupt sources */
+	__raw_writeb(0xff, MCFINTC0_SIMR);
+	if (MCFINTC1_SIMR)
+		__raw_writeb(0xff, MCFINTC1_SIMR);
+	if (MCFINTC2_SIMR)
+		__raw_writeb(0xff, MCFINTC2_SIMR);
+
+	eirq = MCFINT_VECBASE + 64 + (MCFINTC1_ICR0 ? 64 : 0) +
+						(MCFINTC2_ICR0 ? 64 : 0);
+	for (irq = MCFINT_VECBASE; (irq < eirq); irq++) {
+		if ((irq >= EINT1) && (irq <= EINT7))
+			irq_set_chip(irq, &intc_irq_chip_edge_port);
+		else
+			irq_set_chip(irq, &intc_irq_chip);
+		irq_set_irq_type(irq, IRQ_TYPE_LEVEL_HIGH);
+		irq_set_handler(irq, handle_level_irq);
+	}
+}
+
diff --git a/arch/m68k/coldfire/intc.c b/arch/m68k/coldfire/intc.c
new file mode 100644
index 000000000..cce257420
--- /dev/null
+++ b/arch/m68k/coldfire/intc.c
@@ -0,0 +1,150 @@
+/*
+ * intc.c  -- support for the old ColdFire interrupt controller
+ *
+ * (C) Copyright 2009, Greg Ungerer <gerg@snapgear.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file COPYING in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <asm/traps.h>
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+
+/*
+ * The mapping of irq number to a mask register bit is not one-to-one.
+ * The irq numbers are either based on "level" of interrupt or fixed
+ * for an autovector-able interrupt. So we keep a local data structure
+ * that maps from irq to mask register. Not all interrupts will have
+ * an IMR bit.
+ */
+unsigned char mcf_irq2imr[NR_IRQS];
+
+/*
+ * Define the miniumun and maximum external interrupt numbers.
+ * This is also used as the "level" interrupt numbers.
+ */
+#define	EIRQ1	25
+#define	EIRQ7	31
+
+/*
+ * In the early version 2 core ColdFire parts the IMR register was 16 bits
+ * in size. Version 3 (and later version 2) core parts have a 32 bit
+ * sized IMR register. Provide some size independent methods to access the
+ * IMR register.
+ */
+#ifdef MCFSIM_IMR_IS_16BITS
+
+void mcf_setimr(int index)
+{
+	u16 imr;
+	imr = __raw_readw(MCFSIM_IMR);
+	__raw_writew(imr | (0x1 << index), MCFSIM_IMR);
+}
+
+void mcf_clrimr(int index)
+{
+	u16 imr;
+	imr = __raw_readw(MCFSIM_IMR);
+	__raw_writew(imr & ~(0x1 << index), MCFSIM_IMR);
+}
+
+void mcf_maskimr(unsigned int mask)
+{
+	u16 imr;
+	imr = __raw_readw(MCFSIM_IMR);
+	imr |= mask;
+	__raw_writew(imr, MCFSIM_IMR);
+}
+
+#else
+
+void mcf_setimr(int index)
+{
+	u32 imr;
+	imr = __raw_readl(MCFSIM_IMR);
+	__raw_writel(imr | (0x1 << index), MCFSIM_IMR);
+}
+
+void mcf_clrimr(int index)
+{
+	u32 imr;
+	imr = __raw_readl(MCFSIM_IMR);
+	__raw_writel(imr & ~(0x1 << index), MCFSIM_IMR);
+}
+
+void mcf_maskimr(unsigned int mask)
+{
+	u32 imr;
+	imr = __raw_readl(MCFSIM_IMR);
+	imr |= mask;
+	__raw_writel(imr, MCFSIM_IMR);
+}
+
+#endif
+
+/*
+ * Interrupts can be "vectored" on the ColdFire cores that support this old
+ * interrupt controller. That is, the device raising the interrupt can also
+ * supply the vector number to interrupt through. The AVR register of the
+ * interrupt controller enables or disables this for each external interrupt,
+ * so provide generic support for this. Setting this up is out-of-band for
+ * the interrupt system API's, and needs to be done by the driver that
+ * supports this device. Very few devices actually use this.
+ */
+void mcf_autovector(int irq)
+{
+#ifdef MCFSIM_AVR
+	if ((irq >= EIRQ1) && (irq <= EIRQ7)) {
+		u8 avec;
+		avec = __raw_readb(MCFSIM_AVR);
+		avec |= (0x1 << (irq - EIRQ1 + 1));
+		__raw_writeb(avec, MCFSIM_AVR);
+	}
+#endif
+}
+
+static void intc_irq_mask(struct irq_data *d)
+{
+	if (mcf_irq2imr[d->irq])
+		mcf_setimr(mcf_irq2imr[d->irq]);
+}
+
+static void intc_irq_unmask(struct irq_data *d)
+{
+	if (mcf_irq2imr[d->irq])
+		mcf_clrimr(mcf_irq2imr[d->irq]);
+}
+
+static int intc_irq_set_type(struct irq_data *d, unsigned int type)
+{
+	return 0;
+}
+
+static struct irq_chip intc_irq_chip = {
+	.name		= "CF-INTC",
+	.irq_mask	= intc_irq_mask,
+	.irq_unmask	= intc_irq_unmask,
+	.irq_set_type	= intc_irq_set_type,
+};
+
+void __init init_IRQ(void)
+{
+	int irq;
+
+	mcf_maskimr(0xffffffff);
+
+	for (irq = 0; (irq < NR_IRQS); irq++) {
+		irq_set_chip(irq, &intc_irq_chip);
+		irq_set_irq_type(irq, IRQ_TYPE_LEVEL_HIGH);
+		irq_set_handler(irq, handle_level_irq);
+	}
+}
+
diff --git a/arch/m68k/coldfire/m5206.c b/arch/m68k/coldfire/m5206.c
new file mode 100644
index 000000000..2f14ea95c
--- /dev/null
+++ b/arch/m68k/coldfire/m5206.c
@@ -0,0 +1,71 @@
+// SPDX-License-Identifier: GPL-2.0
+/***************************************************************************/
+
+/*
+ *	m5206.c  -- platform support for ColdFire 5206 based boards
+ *
+ *	Copyright (C) 1999-2002, Greg Ungerer (gerg@snapgear.com)
+ * 	Copyright (C) 2000-2001, Lineo Inc. (www.lineo.com) 
+ */
+
+/***************************************************************************/
+
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <asm/machdep.h>
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+#include <asm/mcfclk.h>
+
+/***************************************************************************/
+
+DEFINE_CLK(pll, "pll.0", MCF_CLK);
+DEFINE_CLK(sys, "sys.0", MCF_BUSCLK);
+DEFINE_CLK(mcftmr0, "mcftmr.0", MCF_BUSCLK);
+DEFINE_CLK(mcftmr1, "mcftmr.1", MCF_BUSCLK);
+DEFINE_CLK(mcfuart0, "mcfuart.0", MCF_BUSCLK);
+DEFINE_CLK(mcfuart1, "mcfuart.1", MCF_BUSCLK);
+DEFINE_CLK(mcfi2c0, "imx1-i2c.0", MCF_BUSCLK);
+
+struct clk *mcf_clks[] = {
+	&clk_pll,
+	&clk_sys,
+	&clk_mcftmr0,
+	&clk_mcftmr1,
+	&clk_mcfuart0,
+	&clk_mcfuart1,
+	&clk_mcfi2c0,
+	NULL
+};
+
+/***************************************************************************/
+
+static void __init m5206_i2c_init(void)
+{
+#if IS_ENABLED(CONFIG_I2C_IMX)
+	writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL5 | MCFSIM_ICR_PRI0,
+	       MCFSIM_I2CICR);
+	mcf_mapirq2imr(MCF_IRQ_I2C0, MCFINTC_I2C);
+#endif /* IS_ENABLED(CONFIG_I2C_IMX) */
+}
+
+void __init config_BSP(char *commandp, int size)
+{
+#if defined(CONFIG_NETtel)
+	/* Copy command line from FLASH to local buffer... */
+	memcpy(commandp, (char *) 0xf0004000, size);
+	commandp[size-1] = 0;
+#endif /* CONFIG_NETtel */
+
+	mach_sched_init = hw_timer_init;
+
+	/* Only support the external interrupts on their primary level */
+	mcf_mapirq2imr(25, MCFINTC_EINT1);
+	mcf_mapirq2imr(28, MCFINTC_EINT4);
+	mcf_mapirq2imr(31, MCFINTC_EINT7);
+	m5206_i2c_init();
+}
+
+/***************************************************************************/
diff --git a/arch/m68k/coldfire/m520x.c b/arch/m68k/coldfire/m520x.c
new file mode 100644
index 000000000..b5b2a267d
--- /dev/null
+++ b/arch/m68k/coldfire/m520x.c
@@ -0,0 +1,197 @@
+// SPDX-License-Identifier: GPL-2.0
+/***************************************************************************/
+
+/*
+ *  m520x.c  -- platform support for ColdFire 520x based boards
+ *
+ *  Copyright (C) 2005,      Freescale (www.freescale.com)
+ *  Copyright (C) 2005,      Intec Automation (mike@steroidmicros.com)
+ *  Copyright (C) 1999-2007, Greg Ungerer (gerg@snapgear.com)
+ *  Copyright (C) 2001-2003, SnapGear Inc. (www.snapgear.com)
+ */
+
+/***************************************************************************/
+
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <asm/machdep.h>
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+#include <asm/mcfuart.h>
+#include <asm/mcfclk.h>
+
+/***************************************************************************/
+
+DEFINE_CLK(0, "flexbus", 2, MCF_CLK);
+DEFINE_CLK(0, "fec.0", 12, MCF_CLK);
+DEFINE_CLK(0, "edma", 17, MCF_CLK);
+DEFINE_CLK(0, "intc.0", 18, MCF_CLK);
+DEFINE_CLK(0, "iack.0", 21, MCF_CLK);
+DEFINE_CLK(0, "imx1-i2c.0", 22, MCF_CLK);
+DEFINE_CLK(0, "mcfqspi.0", 23, MCF_CLK);
+DEFINE_CLK(0, "mcfuart.0", 24, MCF_BUSCLK);
+DEFINE_CLK(0, "mcfuart.1", 25, MCF_BUSCLK);
+DEFINE_CLK(0, "mcfuart.2", 26, MCF_BUSCLK);
+DEFINE_CLK(0, "mcftmr.0", 28, MCF_CLK);
+DEFINE_CLK(0, "mcftmr.1", 29, MCF_CLK);
+DEFINE_CLK(0, "mcftmr.2", 30, MCF_CLK);
+DEFINE_CLK(0, "mcftmr.3", 31, MCF_CLK);
+
+DEFINE_CLK(0, "mcfpit.0", 32, MCF_CLK);
+DEFINE_CLK(0, "mcfpit.1", 33, MCF_CLK);
+DEFINE_CLK(0, "mcfeport.0", 34, MCF_CLK);
+DEFINE_CLK(0, "mcfwdt.0", 35, MCF_CLK);
+DEFINE_CLK(0, "pll.0", 36, MCF_CLK);
+DEFINE_CLK(0, "sys.0", 40, MCF_BUSCLK);
+DEFINE_CLK(0, "gpio.0", 41, MCF_BUSCLK);
+DEFINE_CLK(0, "sdram.0", 42, MCF_CLK);
+
+struct clk *mcf_clks[] = {
+	&__clk_0_2, /* flexbus */
+	&__clk_0_12, /* fec.0 */
+	&__clk_0_17, /* edma */
+	&__clk_0_18, /* intc.0 */
+	&__clk_0_21, /* iack.0 */
+	&__clk_0_22, /* imx1-i2c.0 */
+	&__clk_0_23, /* mcfqspi.0 */
+	&__clk_0_24, /* mcfuart.0 */
+	&__clk_0_25, /* mcfuart.1 */
+	&__clk_0_26, /* mcfuart.2 */
+	&__clk_0_28, /* mcftmr.0 */
+	&__clk_0_29, /* mcftmr.1 */
+	&__clk_0_30, /* mcftmr.2 */
+	&__clk_0_31, /* mcftmr.3 */
+
+	&__clk_0_32, /* mcfpit.0 */
+	&__clk_0_33, /* mcfpit.1 */
+	&__clk_0_34, /* mcfeport.0 */
+	&__clk_0_35, /* mcfwdt.0 */
+	&__clk_0_36, /* pll.0 */
+	&__clk_0_40, /* sys.0 */
+	&__clk_0_41, /* gpio.0 */
+	&__clk_0_42, /* sdram.0 */
+	NULL,
+};
+
+static struct clk * const enable_clks[] __initconst = {
+	&__clk_0_2, /* flexbus */
+	&__clk_0_18, /* intc.0 */
+	&__clk_0_21, /* iack.0 */
+	&__clk_0_24, /* mcfuart.0 */
+	&__clk_0_25, /* mcfuart.1 */
+	&__clk_0_26, /* mcfuart.2 */
+
+	&__clk_0_32, /* mcfpit.0 */
+	&__clk_0_33, /* mcfpit.1 */
+	&__clk_0_34, /* mcfeport.0 */
+	&__clk_0_36, /* pll.0 */
+	&__clk_0_40, /* sys.0 */
+	&__clk_0_41, /* gpio.0 */
+	&__clk_0_42, /* sdram.0 */
+};
+
+static struct clk * const disable_clks[] __initconst = {
+	&__clk_0_12, /* fec.0 */
+	&__clk_0_17, /* edma */
+	&__clk_0_22, /* imx1-i2c.0 */
+	&__clk_0_23, /* mcfqspi.0 */
+	&__clk_0_28, /* mcftmr.0 */
+	&__clk_0_29, /* mcftmr.1 */
+	&__clk_0_30, /* mcftmr.2 */
+	&__clk_0_31, /* mcftmr.3 */
+	&__clk_0_35, /* mcfwdt.0 */
+};
+
+
+static void __init m520x_clk_init(void)
+{
+	unsigned i;
+
+	/* make sure these clocks are enabled */
+	for (i = 0; i < ARRAY_SIZE(enable_clks); ++i)
+		__clk_init_enabled(enable_clks[i]);
+	/* make sure these clocks are disabled */
+	for (i = 0; i < ARRAY_SIZE(disable_clks); ++i)
+		__clk_init_disabled(disable_clks[i]);
+}
+
+/***************************************************************************/
+
+static void __init m520x_qspi_init(void)
+{
+#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI)
+	u16 par;
+	/* setup Port QS for QSPI with gpio CS control */
+	writeb(0x3f, MCF_GPIO_PAR_QSPI);
+	/* make U1CTS and U2RTS gpio for cs_control */
+	par = readw(MCF_GPIO_PAR_UART);
+	par &= 0x00ff;
+	writew(par, MCF_GPIO_PAR_UART);
+#endif /* IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI) */
+}
+
+/***************************************************************************/
+
+static void __init m520x_i2c_init(void)
+{
+#if IS_ENABLED(CONFIG_I2C_IMX)
+	u8 par;
+
+	/* setup Port FECI2C Pin Assignment Register for I2C */
+	/*  set PAR_SCL to SCL and PAR_SDA to SDA */
+	par = readb(MCF_GPIO_PAR_FECI2C);
+	par |= 0x0f;
+	writeb(par, MCF_GPIO_PAR_FECI2C);
+#endif /* IS_ENABLED(CONFIG_I2C_IMX) */
+}
+
+/***************************************************************************/
+
+static void __init m520x_uarts_init(void)
+{
+	u16 par;
+	u8 par2;
+
+	/* UART0 and UART1 GPIO pin setup */
+	par = readw(MCF_GPIO_PAR_UART);
+	par |= MCF_GPIO_PAR_UART_PAR_UTXD0 | MCF_GPIO_PAR_UART_PAR_URXD0;
+	par |= MCF_GPIO_PAR_UART_PAR_UTXD1 | MCF_GPIO_PAR_UART_PAR_URXD1;
+	writew(par, MCF_GPIO_PAR_UART);
+
+	/* UART1 GPIO pin setup */
+	par2 = readb(MCF_GPIO_PAR_FECI2C);
+	par2 &= ~0x0F;
+	par2 |= MCF_GPIO_PAR_FECI2C_PAR_SCL_UTXD2 |
+		MCF_GPIO_PAR_FECI2C_PAR_SDA_URXD2;
+	writeb(par2, MCF_GPIO_PAR_FECI2C);
+}
+
+/***************************************************************************/
+
+static void __init m520x_fec_init(void)
+{
+	u8 v;
+
+	/* Set multi-function pins to ethernet mode */
+	v = readb(MCF_GPIO_PAR_FEC);
+	writeb(v | 0xf0, MCF_GPIO_PAR_FEC);
+
+	v = readb(MCF_GPIO_PAR_FECI2C);
+	writeb(v | 0x0f, MCF_GPIO_PAR_FECI2C);
+}
+
+/***************************************************************************/
+
+void __init config_BSP(char *commandp, int size)
+{
+	mach_sched_init = hw_timer_init;
+	m520x_clk_init();
+	m520x_uarts_init();
+	m520x_fec_init();
+	m520x_qspi_init();
+	m520x_i2c_init();
+}
+
+/***************************************************************************/
diff --git a/arch/m68k/coldfire/m523x.c b/arch/m68k/coldfire/m523x.c
new file mode 100644
index 000000000..ddf2496ed
--- /dev/null
+++ b/arch/m68k/coldfire/m523x.c
@@ -0,0 +1,105 @@
+// SPDX-License-Identifier: GPL-2.0
+/***************************************************************************/
+
+/*
+ *	m523x.c  -- platform support for ColdFire 523x based boards
+ *
+ *	Sub-architcture dependent initialization code for the Freescale
+ *	523x CPUs.
+ *
+ *	Copyright (C) 1999-2005, Greg Ungerer (gerg@snapgear.com)
+ *	Copyright (C) 2001-2003, SnapGear Inc. (www.snapgear.com)
+ */
+
+/***************************************************************************/
+
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <asm/machdep.h>
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+#include <asm/mcfclk.h>
+
+/***************************************************************************/
+
+DEFINE_CLK(pll, "pll.0", MCF_CLK);
+DEFINE_CLK(sys, "sys.0", MCF_BUSCLK);
+DEFINE_CLK(mcfpit0, "mcfpit.0", MCF_CLK);
+DEFINE_CLK(mcfpit1, "mcfpit.1", MCF_CLK);
+DEFINE_CLK(mcfpit2, "mcfpit.2", MCF_CLK);
+DEFINE_CLK(mcfpit3, "mcfpit.3", MCF_CLK);
+DEFINE_CLK(mcfuart0, "mcfuart.0", MCF_BUSCLK);
+DEFINE_CLK(mcfuart1, "mcfuart.1", MCF_BUSCLK);
+DEFINE_CLK(mcfuart2, "mcfuart.2", MCF_BUSCLK);
+DEFINE_CLK(mcfqspi0, "mcfqspi.0", MCF_BUSCLK);
+DEFINE_CLK(fec0, "fec.0", MCF_BUSCLK);
+DEFINE_CLK(mcfi2c0, "imx1-i2c.0", MCF_BUSCLK);
+
+struct clk *mcf_clks[] = {
+	&clk_pll,
+	&clk_sys,
+	&clk_mcfpit0,
+	&clk_mcfpit1,
+	&clk_mcfpit2,
+	&clk_mcfpit3,
+	&clk_mcfuart0,
+	&clk_mcfuart1,
+	&clk_mcfuart2,
+	&clk_mcfqspi0,
+	&clk_fec0,
+	&clk_mcfi2c0,
+	NULL
+};
+
+/***************************************************************************/
+
+static void __init m523x_qspi_init(void)
+{
+#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI)
+	u16 par;
+
+	/* setup QSPS pins for QSPI with gpio CS control */
+	writeb(0x1f, MCFGPIO_PAR_QSPI);
+	/* and CS2 & CS3 as gpio */
+	par = readw(MCFGPIO_PAR_TIMER);
+	par &= 0x3f3f;
+	writew(par, MCFGPIO_PAR_TIMER);
+#endif /* IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI) */
+}
+
+/***************************************************************************/
+
+static void __init m523x_i2c_init(void)
+{
+#if IS_ENABLED(CONFIG_I2C_IMX)
+	u8 par;
+
+	/* setup Port AS Pin Assignment Register for I2C */
+	/*  set PASPA0 to SCL and PASPA1 to SDA */
+	par = readb(MCFGPIO_PAR_FECI2C);
+	par |= 0x0f;
+	writeb(par, MCFGPIO_PAR_FECI2C);
+#endif /* IS_ENABLED(CONFIG_I2C_IMX) */
+}
+
+/***************************************************************************/
+
+static void __init m523x_fec_init(void)
+{
+	/* Set multi-function pins to ethernet use */
+	writeb(readb(MCFGPIO_PAR_FECI2C) | 0xf0, MCFGPIO_PAR_FECI2C);
+}
+
+/***************************************************************************/
+
+void __init config_BSP(char *commandp, int size)
+{
+	mach_sched_init = hw_timer_init;
+	m523x_fec_init();
+	m523x_qspi_init();
+	m523x_i2c_init();
+}
+
+/***************************************************************************/
diff --git a/arch/m68k/coldfire/m5249.c b/arch/m68k/coldfire/m5249.c
new file mode 100644
index 000000000..0590f8c42
--- /dev/null
+++ b/arch/m68k/coldfire/m5249.c
@@ -0,0 +1,152 @@
+// SPDX-License-Identifier: GPL-2.0
+/***************************************************************************/
+
+/*
+ *	m5249.c  -- platform support for ColdFire 5249 based boards
+ *
+ *	Copyright (C) 2002, Greg Ungerer (gerg@snapgear.com)
+ */
+
+/***************************************************************************/
+
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <asm/machdep.h>
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+#include <asm/mcfclk.h>
+
+/***************************************************************************/
+
+DEFINE_CLK(pll, "pll.0", MCF_CLK);
+DEFINE_CLK(sys, "sys.0", MCF_BUSCLK);
+DEFINE_CLK(mcftmr0, "mcftmr.0", MCF_BUSCLK);
+DEFINE_CLK(mcftmr1, "mcftmr.1", MCF_BUSCLK);
+DEFINE_CLK(mcfuart0, "mcfuart.0", MCF_BUSCLK);
+DEFINE_CLK(mcfuart1, "mcfuart.1", MCF_BUSCLK);
+DEFINE_CLK(mcfqspi0, "mcfqspi.0", MCF_BUSCLK);
+DEFINE_CLK(mcfi2c0, "imx1-i2c.0", MCF_BUSCLK);
+DEFINE_CLK(mcfi2c1, "imx1-i2c.1", MCF_BUSCLK);
+
+struct clk *mcf_clks[] = {
+	&clk_pll,
+	&clk_sys,
+	&clk_mcftmr0,
+	&clk_mcftmr1,
+	&clk_mcfuart0,
+	&clk_mcfuart1,
+	&clk_mcfqspi0,
+	&clk_mcfi2c0,
+	&clk_mcfi2c1,
+	NULL
+};
+
+/***************************************************************************/
+
+#ifdef CONFIG_M5249C3
+
+static struct resource m5249_smc91x_resources[] = {
+	{
+		.start		= 0xe0000300,
+		.end		= 0xe0000300 + 0x100,
+		.flags		= IORESOURCE_MEM,
+	},
+	{
+		.start		= MCF_IRQ_GPIO6,
+		.end		= MCF_IRQ_GPIO6,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device m5249_smc91x = {
+	.name			= "smc91x",
+	.id			= 0,
+	.num_resources		= ARRAY_SIZE(m5249_smc91x_resources),
+	.resource		= m5249_smc91x_resources,
+};
+
+#endif /* CONFIG_M5249C3 */
+
+static struct platform_device *m5249_devices[] __initdata = {
+#ifdef CONFIG_M5249C3
+	&m5249_smc91x,
+#endif
+};
+
+/***************************************************************************/
+
+static void __init m5249_qspi_init(void)
+{
+#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI)
+	/* QSPI irq setup */
+	writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL4 | MCFSIM_ICR_PRI0,
+	       MCFSIM_QSPIICR);
+	mcf_mapirq2imr(MCF_IRQ_QSPI, MCFINTC_QSPI);
+#endif /* IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI) */
+}
+
+/***************************************************************************/
+
+static void __init m5249_i2c_init(void)
+{
+#if IS_ENABLED(CONFIG_I2C_IMX)
+	u32 r;
+
+	/* first I2C controller uses regular irq setup */
+	writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL5 | MCFSIM_ICR_PRI0,
+	       MCFSIM_I2CICR);
+	mcf_mapirq2imr(MCF_IRQ_I2C0, MCFINTC_I2C);
+
+	/* second I2C controller is completely different */
+	r = readl(MCFINTC2_INTPRI_REG(MCF_IRQ_I2C1));
+	r &= ~MCFINTC2_INTPRI_BITS(0xf, MCF_IRQ_I2C1);
+	r |= MCFINTC2_INTPRI_BITS(0x5, MCF_IRQ_I2C1);
+	writel(r, MCFINTC2_INTPRI_REG(MCF_IRQ_I2C1));
+#endif /* CONFIG_I2C_IMX */
+}
+
+/***************************************************************************/
+
+#ifdef CONFIG_M5249C3
+
+static void __init m5249_smc91x_init(void)
+{
+	u32  gpio;
+
+	/* Set the GPIO line as interrupt source for smc91x device */
+	gpio = readl(MCFSIM2_GPIOINTENABLE);
+	writel(gpio | 0x40, MCFSIM2_GPIOINTENABLE);
+
+	gpio = readl(MCFINTC2_INTPRI5);
+	writel(gpio | 0x04000000, MCFINTC2_INTPRI5);
+}
+
+#endif /* CONFIG_M5249C3 */
+
+/***************************************************************************/
+
+void __init config_BSP(char *commandp, int size)
+{
+	mach_sched_init = hw_timer_init;
+
+#ifdef CONFIG_M5249C3
+	m5249_smc91x_init();
+#endif
+	m5249_qspi_init();
+	m5249_i2c_init();
+}
+
+/***************************************************************************/
+
+static int __init init_BSP(void)
+{
+	platform_add_devices(m5249_devices, ARRAY_SIZE(m5249_devices));
+	return 0;
+}
+
+arch_initcall(init_BSP);
+
+/***************************************************************************/
diff --git a/arch/m68k/coldfire/m525x.c b/arch/m68k/coldfire/m525x.c
new file mode 100644
index 000000000..1772359c4
--- /dev/null
+++ b/arch/m68k/coldfire/m525x.c
@@ -0,0 +1,93 @@
+// SPDX-License-Identifier: GPL-2.0
+/***************************************************************************/
+
+/*
+ *	525x.c  -- platform support for ColdFire 525x based boards
+ *
+ *	Copyright (C) 2012, Steven King <sfking@fdwdc.com>
+ */
+
+/***************************************************************************/
+
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <asm/machdep.h>
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+#include <asm/mcfclk.h>
+
+/***************************************************************************/
+
+DEFINE_CLK(pll, "pll.0", MCF_CLK);
+DEFINE_CLK(sys, "sys.0", MCF_BUSCLK);
+DEFINE_CLK(mcftmr0, "mcftmr.0", MCF_BUSCLK);
+DEFINE_CLK(mcftmr1, "mcftmr.1", MCF_BUSCLK);
+DEFINE_CLK(mcfuart0, "mcfuart.0", MCF_BUSCLK);
+DEFINE_CLK(mcfuart1, "mcfuart.1", MCF_BUSCLK);
+DEFINE_CLK(mcfqspi0, "mcfqspi.0", MCF_BUSCLK);
+DEFINE_CLK(mcfi2c0, "imx1-i2c.0", MCF_BUSCLK);
+DEFINE_CLK(mcfi2c1, "imx1-i2c.1", MCF_BUSCLK);
+
+struct clk *mcf_clks[] = {
+	&clk_pll,
+	&clk_sys,
+	&clk_mcftmr0,
+	&clk_mcftmr1,
+	&clk_mcfuart0,
+	&clk_mcfuart1,
+	&clk_mcfqspi0,
+	&clk_mcfi2c0,
+	&clk_mcfi2c1,
+	NULL
+};
+
+/***************************************************************************/
+
+static void __init m525x_qspi_init(void)
+{
+#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI)
+	/* set the GPIO function for the qspi cs gpios */
+	/* FIXME: replace with pinmux/pinctl support */
+	u32 f = readl(MCFSIM2_GPIOFUNC);
+	f |= (1 << MCFQSPI_CS2) | (1 << MCFQSPI_CS1) | (1 << MCFQSPI_CS0);
+	writel(f, MCFSIM2_GPIOFUNC);
+
+	/* QSPI irq setup */
+	writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL4 | MCFSIM_ICR_PRI0,
+	       MCFSIM_QSPIICR);
+	mcf_mapirq2imr(MCF_IRQ_QSPI, MCFINTC_QSPI);
+#endif /* IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI) */
+}
+
+static void __init m525x_i2c_init(void)
+{
+#if IS_ENABLED(CONFIG_I2C_IMX)
+	u32 r;
+
+	/* first I2C controller uses regular irq setup */
+	writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL5 | MCFSIM_ICR_PRI0,
+	       MCFSIM_I2CICR);
+	mcf_mapirq2imr(MCF_IRQ_I2C0, MCFINTC_I2C);
+
+	/* second I2C controller is completely different */
+	r = readl(MCFINTC2_INTPRI_REG(MCF_IRQ_I2C1));
+	r &= ~MCFINTC2_INTPRI_BITS(0xf, MCF_IRQ_I2C1);
+	r |= MCFINTC2_INTPRI_BITS(0x5, MCF_IRQ_I2C1);
+	writel(r, MCFINTC2_INTPRI_REG(MCF_IRQ_I2C1));
+#endif /* IS_ENABLED(CONFIG_I2C_IMX) */
+}
+
+/***************************************************************************/
+
+void __init config_BSP(char *commandp, int size)
+{
+	mach_sched_init = hw_timer_init;
+
+	m525x_qspi_init();
+	m525x_i2c_init();
+}
+
+/***************************************************************************/
diff --git a/arch/m68k/coldfire/m5272.c b/arch/m68k/coldfire/m5272.c
new file mode 100644
index 000000000..ad1185c68
--- /dev/null
+++ b/arch/m68k/coldfire/m5272.c
@@ -0,0 +1,136 @@
+// SPDX-License-Identifier: GPL-2.0
+/***************************************************************************/
+
+/*
+ *	m5272.c  -- platform support for ColdFire 5272 based boards
+ *
+ *	Copyright (C) 1999-2002, Greg Ungerer (gerg@snapgear.com)
+ *	Copyright (C) 2001-2002, SnapGear Inc. (www.snapgear.com)
+ */
+
+/***************************************************************************/
+
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/phy.h>
+#include <linux/phy_fixed.h>
+#include <asm/machdep.h>
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+#include <asm/mcfuart.h>
+#include <asm/mcfclk.h>
+
+/***************************************************************************/
+
+/*
+ *	Some platforms need software versions of the GPIO data registers.
+ */
+unsigned short ppdata;
+unsigned char ledbank = 0xff;
+
+/***************************************************************************/
+
+DEFINE_CLK(pll, "pll.0", MCF_CLK);
+DEFINE_CLK(sys, "sys.0", MCF_BUSCLK);
+DEFINE_CLK(mcftmr0, "mcftmr.0", MCF_BUSCLK);
+DEFINE_CLK(mcftmr1, "mcftmr.1", MCF_BUSCLK);
+DEFINE_CLK(mcftmr2, "mcftmr.2", MCF_BUSCLK);
+DEFINE_CLK(mcftmr3, "mcftmr.3", MCF_BUSCLK);
+DEFINE_CLK(mcfuart0, "mcfuart.0", MCF_BUSCLK);
+DEFINE_CLK(mcfuart1, "mcfuart.1", MCF_BUSCLK);
+DEFINE_CLK(mcfqspi0, "mcfqspi.0", MCF_BUSCLK);
+DEFINE_CLK(fec0, "fec.0", MCF_BUSCLK);
+
+struct clk *mcf_clks[] = {
+	&clk_pll,
+	&clk_sys,
+	&clk_mcftmr0,
+	&clk_mcftmr1,
+	&clk_mcftmr2,
+	&clk_mcftmr3,
+	&clk_mcfuart0,
+	&clk_mcfuart1,
+	&clk_mcfqspi0,
+	&clk_fec0,
+	NULL
+};
+
+/***************************************************************************/
+
+static void __init m5272_uarts_init(void)
+{
+	u32 v;
+
+	/* Enable the output lines for the serial ports */
+	v = readl(MCFSIM_PBCNT);
+	v = (v & ~0x000000ff) | 0x00000055;
+	writel(v, MCFSIM_PBCNT);
+
+	v = readl(MCFSIM_PDCNT);
+	v = (v & ~0x000003fc) | 0x000002a8;
+	writel(v, MCFSIM_PDCNT);
+}
+
+/***************************************************************************/
+
+static void m5272_cpu_reset(void)
+{
+	local_irq_disable();
+	/* Set watchdog to reset, and enabled */
+	__raw_writew(0, MCFSIM_WIRR);
+	__raw_writew(1, MCFSIM_WRRR);
+	__raw_writew(0, MCFSIM_WCR);
+	for (;;)
+		/* wait for watchdog to timeout */;
+}
+
+/***************************************************************************/
+
+void __init config_BSP(char *commandp, int size)
+{
+#if defined (CONFIG_MOD5272)
+	/* Set base of device vectors to be 64 */
+	writeb(0x40, MCFSIM_PIVR);
+#endif
+
+#if defined(CONFIG_NETtel) || defined(CONFIG_SCALES)
+	/* Copy command line from FLASH to local buffer... */
+	memcpy(commandp, (char *) 0xf0004000, size);
+	commandp[size-1] = 0;
+#elif defined(CONFIG_CANCam)
+	/* Copy command line from FLASH to local buffer... */
+	memcpy(commandp, (char *) 0xf0010000, size);
+	commandp[size-1] = 0;
+#endif
+
+	mach_reset = m5272_cpu_reset;
+	mach_sched_init = hw_timer_init;
+}
+
+/***************************************************************************/
+
+/*
+ * Some 5272 based boards have the FEC ethernet directly connected to
+ * an ethernet switch. In this case we need to use the fixed phy type,
+ * and we need to declare it early in boot.
+ */
+static struct fixed_phy_status nettel_fixed_phy_status __initdata = {
+	.link	= 1,
+	.speed	= 100,
+	.duplex	= 0,
+};
+
+/***************************************************************************/
+
+static int __init init_BSP(void)
+{
+	m5272_uarts_init();
+	fixed_phy_add(PHY_POLL, 0, &nettel_fixed_phy_status, -1);
+	return 0;
+}
+
+arch_initcall(init_BSP);
+
+/***************************************************************************/
diff --git a/arch/m68k/coldfire/m527x.c b/arch/m68k/coldfire/m527x.c
new file mode 100644
index 000000000..cad462df6
--- /dev/null
+++ b/arch/m68k/coldfire/m527x.c
@@ -0,0 +1,156 @@
+// SPDX-License-Identifier: GPL-2.0
+/***************************************************************************/
+
+/*
+ *	m527x.c  -- platform support for ColdFire 527x based boards
+ *
+ *	Sub-architcture dependent initialization code for the Freescale
+ *	5270/5271 and 5274/5275 CPUs.
+ *
+ *	Copyright (C) 1999-2004, Greg Ungerer (gerg@snapgear.com)
+ *	Copyright (C) 2001-2004, SnapGear Inc. (www.snapgear.com)
+ */
+
+/***************************************************************************/
+
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <asm/machdep.h>
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+#include <asm/mcfuart.h>
+#include <asm/mcfclk.h>
+
+/***************************************************************************/
+
+DEFINE_CLK(pll, "pll.0", MCF_CLK);
+DEFINE_CLK(sys, "sys.0", MCF_BUSCLK);
+DEFINE_CLK(mcfpit0, "mcfpit.0", MCF_CLK);
+DEFINE_CLK(mcfpit1, "mcfpit.1", MCF_CLK);
+DEFINE_CLK(mcfpit2, "mcfpit.2", MCF_CLK);
+DEFINE_CLK(mcfpit3, "mcfpit.3", MCF_CLK);
+DEFINE_CLK(mcfuart0, "mcfuart.0", MCF_BUSCLK);
+DEFINE_CLK(mcfuart1, "mcfuart.1", MCF_BUSCLK);
+DEFINE_CLK(mcfuart2, "mcfuart.2", MCF_BUSCLK);
+DEFINE_CLK(mcfqspi0, "mcfqspi.0", MCF_BUSCLK);
+DEFINE_CLK(fec0, "fec.0", MCF_BUSCLK);
+DEFINE_CLK(fec1, "fec.1", MCF_BUSCLK);
+DEFINE_CLK(mcfi2c0, "imx1-i2c.0", MCF_BUSCLK);
+
+struct clk *mcf_clks[] = {
+	&clk_pll,
+	&clk_sys,
+	&clk_mcfpit0,
+	&clk_mcfpit1,
+	&clk_mcfpit2,
+	&clk_mcfpit3,
+	&clk_mcfuart0,
+	&clk_mcfuart1,
+	&clk_mcfuart2,
+	&clk_mcfqspi0,
+	&clk_fec0,
+	&clk_fec1,
+	&clk_mcfi2c0,
+	NULL
+};
+
+/***************************************************************************/
+
+static void __init m527x_qspi_init(void)
+{
+#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI)
+#if defined(CONFIG_M5271)
+	u16 par;
+
+	/* setup QSPS pins for QSPI with gpio CS control */
+	writeb(0x1f, MCFGPIO_PAR_QSPI);
+	/* and CS2 & CS3 as gpio */
+	par = readw(MCFGPIO_PAR_TIMER);
+	par &= 0x3f3f;
+	writew(par, MCFGPIO_PAR_TIMER);
+#elif defined(CONFIG_M5275)
+	/* setup QSPS pins for QSPI with gpio CS control */
+	writew(0x003e, MCFGPIO_PAR_QSPI);
+#endif
+#endif /* IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI) */
+}
+
+/***************************************************************************/
+
+static void __init m527x_i2c_init(void)
+{
+#if IS_ENABLED(CONFIG_I2C_IMX)
+#if defined(CONFIG_M5271)
+	u8 par;
+
+	/* setup Port FECI2C Pin Assignment Register for I2C */
+	/*  set PAR_SCL to SCL and PAR_SDA to SDA */
+	par = readb(MCFGPIO_PAR_FECI2C);
+	par |= 0x0f;
+	writeb(par, MCFGPIO_PAR_FECI2C);
+#elif defined(CONFIG_M5275)
+	u16 par;
+
+	/* setup Port FECI2C Pin Assignment Register for I2C */
+	/*  set PAR_SCL to SCL and PAR_SDA to SDA */
+	par = readw(MCFGPIO_PAR_FECI2C);
+	par |= 0x0f;
+	writew(par, MCFGPIO_PAR_FECI2C);
+#endif
+#endif /* IS_ENABLED(CONFIG_I2C_IMX) */
+}
+
+/***************************************************************************/
+
+static void __init m527x_uarts_init(void)
+{
+	u16 sepmask;
+
+	/*
+	 * External Pin Mask Setting & Enable External Pin for Interface
+	 */
+	sepmask = readw(MCFGPIO_PAR_UART);
+	sepmask |= UART0_ENABLE_MASK | UART1_ENABLE_MASK | UART2_ENABLE_MASK;
+	writew(sepmask, MCFGPIO_PAR_UART);
+}
+
+/***************************************************************************/
+
+static void __init m527x_fec_init(void)
+{
+	u8 v;
+
+	/* Set multi-function pins to ethernet mode for fec0 */
+#if defined(CONFIG_M5271)
+	v = readb(MCFGPIO_PAR_FECI2C);
+	writeb(v | 0xf0, MCFGPIO_PAR_FECI2C);
+#else
+	u16 par;
+
+	par = readw(MCFGPIO_PAR_FECI2C);
+	writew(par | 0xf00, MCFGPIO_PAR_FECI2C);
+	v = readb(MCFGPIO_PAR_FEC0HL);
+	writeb(v | 0xc0, MCFGPIO_PAR_FEC0HL);
+
+	/* Set multi-function pins to ethernet mode for fec1 */
+	par = readw(MCFGPIO_PAR_FECI2C);
+	writew(par | 0xa0, MCFGPIO_PAR_FECI2C);
+	v = readb(MCFGPIO_PAR_FEC1HL);
+	writeb(v | 0xc0, MCFGPIO_PAR_FEC1HL);
+#endif
+}
+
+/***************************************************************************/
+
+void __init config_BSP(char *commandp, int size)
+{
+	mach_sched_init = hw_timer_init;
+	m527x_uarts_init();
+	m527x_fec_init();
+	m527x_qspi_init();
+	m527x_i2c_init();
+}
+
+/***************************************************************************/
diff --git a/arch/m68k/coldfire/m528x.c b/arch/m68k/coldfire/m528x.c
new file mode 100644
index 000000000..7ad319388
--- /dev/null
+++ b/arch/m68k/coldfire/m528x.c
@@ -0,0 +1,151 @@
+// SPDX-License-Identifier: GPL-2.0
+/***************************************************************************/
+
+/*
+ *	m528x.c  -- platform support for ColdFire 528x based boards
+ *
+ *	Sub-architcture dependent initialization code for the Freescale
+ *	5280, 5281 and 5282 CPUs.
+ *
+ *	Copyright (C) 1999-2003, Greg Ungerer (gerg@snapgear.com)
+ *	Copyright (C) 2001-2003, SnapGear Inc. (www.snapgear.com)
+ */
+
+/***************************************************************************/
+
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <asm/machdep.h>
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+#include <asm/mcfuart.h>
+#include <asm/mcfclk.h>
+
+/***************************************************************************/
+
+DEFINE_CLK(pll, "pll.0", MCF_CLK);
+DEFINE_CLK(sys, "sys.0", MCF_BUSCLK);
+DEFINE_CLK(mcfpit0, "mcfpit.0", MCF_CLK);
+DEFINE_CLK(mcfpit1, "mcfpit.1", MCF_CLK);
+DEFINE_CLK(mcfpit2, "mcfpit.2", MCF_CLK);
+DEFINE_CLK(mcfpit3, "mcfpit.3", MCF_CLK);
+DEFINE_CLK(mcfuart0, "mcfuart.0", MCF_BUSCLK);
+DEFINE_CLK(mcfuart1, "mcfuart.1", MCF_BUSCLK);
+DEFINE_CLK(mcfuart2, "mcfuart.2", MCF_BUSCLK);
+DEFINE_CLK(mcfqspi0, "mcfqspi.0", MCF_BUSCLK);
+DEFINE_CLK(fec0, "fec.0", MCF_BUSCLK);
+DEFINE_CLK(mcfi2c0, "imx1-i2c.0", MCF_BUSCLK);
+
+struct clk *mcf_clks[] = {
+	&clk_pll,
+	&clk_sys,
+	&clk_mcfpit0,
+	&clk_mcfpit1,
+	&clk_mcfpit2,
+	&clk_mcfpit3,
+	&clk_mcfuart0,
+	&clk_mcfuart1,
+	&clk_mcfuart2,
+	&clk_mcfqspi0,
+	&clk_fec0,
+	&clk_mcfi2c0,
+	NULL
+};
+
+/***************************************************************************/
+
+static void __init m528x_qspi_init(void)
+{
+#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI)
+	/* setup Port QS for QSPI with gpio CS control */
+	__raw_writeb(0x07, MCFGPIO_PQSPAR);
+#endif /* IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI) */
+}
+
+/***************************************************************************/
+
+static void __init m528x_i2c_init(void)
+{
+#if IS_ENABLED(CONFIG_I2C_IMX)
+	u16 paspar;
+
+	/* setup Port AS Pin Assignment Register for I2C */
+	/*  set PASPA0 to SCL and PASPA1 to SDA */
+	paspar = readw(MCFGPIO_PASPAR);
+	paspar |= 0xF;
+	writew(paspar, MCFGPIO_PASPAR);
+#endif /* IS_ENABLED(CONFIG_I2C_IMX) */
+}
+
+/***************************************************************************/
+
+static void __init m528x_uarts_init(void)
+{
+	u8 port;
+
+	/* make sure PUAPAR is set for UART0 and UART1 */
+	port = readb(MCFGPIO_PUAPAR);
+	port |= 0x03 | (0x03 << 2);
+	writeb(port, MCFGPIO_PUAPAR);
+}
+
+/***************************************************************************/
+
+static void __init m528x_fec_init(void)
+{
+	u16 v16;
+
+	/* Set multi-function pins to ethernet mode for fec0 */
+	v16 = readw(MCFGPIO_PASPAR);
+	writew(v16 | 0xf00, MCFGPIO_PASPAR);
+	writeb(0xc0, MCFGPIO_PEHLPAR);
+}
+
+/***************************************************************************/
+
+#ifdef CONFIG_WILDFIRE
+void wildfire_halt(void)
+{
+	writeb(0, 0x30000007);
+	writeb(0x2, 0x30000007);
+}
+#endif
+
+#ifdef CONFIG_WILDFIREMOD
+void wildfiremod_halt(void)
+{
+	printk(KERN_INFO "WildFireMod hibernating...\n");
+
+	/* Set portE.5 to Digital IO */
+	writew(readw(MCFGPIO_PEPAR) & ~(1 << (5 * 2)), MCFGPIO_PEPAR);
+
+	/* Make portE.5 an output */
+	writeb(readb(MCFGPIO_PDDR_E) | (1 << 5), MCFGPIO_PDDR_E);
+
+	/* Now toggle portE.5 from low to high */
+	writeb(readb(MCFGPIO_PODR_E) & ~(1 << 5), MCFGPIO_PODR_E);
+	writeb(readb(MCFGPIO_PODR_E) | (1 << 5), MCFGPIO_PODR_E);
+
+	printk(KERN_EMERG "Failed to hibernate. Halting!\n");
+}
+#endif
+
+void __init config_BSP(char *commandp, int size)
+{
+#ifdef CONFIG_WILDFIRE
+	mach_halt = wildfire_halt;
+#endif
+#ifdef CONFIG_WILDFIREMOD
+	mach_halt = wildfiremod_halt;
+#endif
+	mach_sched_init = hw_timer_init;
+	m528x_uarts_init();
+	m528x_fec_init();
+	m528x_qspi_init();
+	m528x_i2c_init();
+}
+
+/***************************************************************************/
diff --git a/arch/m68k/coldfire/m5307.c b/arch/m68k/coldfire/m5307.c
new file mode 100644
index 000000000..64b4b1fd3
--- /dev/null
+++ b/arch/m68k/coldfire/m5307.c
@@ -0,0 +1,93 @@
+// SPDX-License-Identifier: GPL-2.0
+/***************************************************************************/
+
+/*
+ *	m5307.c  -- platform support for ColdFire 5307 based boards
+ *
+ *	Copyright (C) 1999-2002, Greg Ungerer (gerg@snapgear.com)
+ *	Copyright (C) 2000, Lineo (www.lineo.com)
+ */
+
+/***************************************************************************/
+
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <asm/machdep.h>
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+#include <asm/mcfwdebug.h>
+#include <asm/mcfclk.h>
+
+/***************************************************************************/
+
+/*
+ *	Some platforms need software versions of the GPIO data registers.
+ */
+unsigned short ppdata;
+unsigned char ledbank = 0xff;
+
+/***************************************************************************/
+
+DEFINE_CLK(pll, "pll.0", MCF_CLK);
+DEFINE_CLK(sys, "sys.0", MCF_BUSCLK);
+DEFINE_CLK(mcftmr0, "mcftmr.0", MCF_BUSCLK);
+DEFINE_CLK(mcftmr1, "mcftmr.1", MCF_BUSCLK);
+DEFINE_CLK(mcfuart0, "mcfuart.0", MCF_BUSCLK);
+DEFINE_CLK(mcfuart1, "mcfuart.1", MCF_BUSCLK);
+DEFINE_CLK(mcfi2c0, "imx1-i2c.0", MCF_BUSCLK);
+
+struct clk *mcf_clks[] = {
+	&clk_pll,
+	&clk_sys,
+	&clk_mcftmr0,
+	&clk_mcftmr1,
+	&clk_mcfuart0,
+	&clk_mcfuart1,
+	&clk_mcfi2c0,
+	NULL
+};
+
+/***************************************************************************/
+
+static void __init m5307_i2c_init(void)
+{
+#if IS_ENABLED(CONFIG_I2C_IMX)
+	writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL5 | MCFSIM_ICR_PRI0,
+	       MCFSIM_I2CICR);
+	mcf_mapirq2imr(MCF_IRQ_I2C0, MCFINTC_I2C);
+#endif /* IS_ENABLED(CONFIG_I2C_IMX) */
+}
+
+/***************************************************************************/
+
+void __init config_BSP(char *commandp, int size)
+{
+#if defined(CONFIG_NETtel) || \
+    defined(CONFIG_SECUREEDGEMP3) || defined(CONFIG_CLEOPATRA)
+	/* Copy command line from FLASH to local buffer... */
+	memcpy(commandp, (char *) 0xf0004000, size);
+	commandp[size-1] = 0;
+#endif
+
+	mach_sched_init = hw_timer_init;
+
+	/* Only support the external interrupts on their primary level */
+	mcf_mapirq2imr(25, MCFINTC_EINT1);
+	mcf_mapirq2imr(27, MCFINTC_EINT3);
+	mcf_mapirq2imr(29, MCFINTC_EINT5);
+	mcf_mapirq2imr(31, MCFINTC_EINT7);
+
+#ifdef CONFIG_BDM_DISABLE
+	/*
+	 * Disable the BDM clocking.  This also turns off most of the rest of
+	 * the BDM device.  This is good for EMC reasons. This option is not
+	 * incompatible with the memory protection option.
+	 */
+	wdebug(MCFDEBUG_CSR, MCFDEBUG_CSR_PSTCLK);
+#endif
+	m5307_i2c_init();
+}
+
+/***************************************************************************/
diff --git a/arch/m68k/coldfire/m53xx.c b/arch/m68k/coldfire/m53xx.c
new file mode 100644
index 000000000..cf1917934
--- /dev/null
+++ b/arch/m68k/coldfire/m53xx.c
@@ -0,0 +1,598 @@
+/***************************************************************************/
+
+/*
+ *	m53xx.c -- platform support for ColdFire 53xx based boards
+ *
+ *	Copyright (C) 1999-2002, Greg Ungerer (gerg@snapgear.com)
+ *	Copyright (C) 2000, Lineo (www.lineo.com)
+ *	Yaroslav Vinogradov yaroslav.vinogradov@freescale.com
+ *	Copyright Freescale Semiconductor, Inc 2006
+ *	Copyright (c) 2006, emlix, Sebastian Hess <shess@hessware.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+/***************************************************************************/
+
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <asm/machdep.h>
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+#include <asm/mcfuart.h>
+#include <asm/mcfdma.h>
+#include <asm/mcfwdebug.h>
+#include <asm/mcfclk.h>
+
+/***************************************************************************/
+
+DEFINE_CLK(0, "flexbus", 2, MCF_CLK);
+DEFINE_CLK(0, "mcfcan.0", 8, MCF_CLK);
+DEFINE_CLK(0, "fec.0", 12, MCF_CLK);
+DEFINE_CLK(0, "edma", 17, MCF_CLK);
+DEFINE_CLK(0, "intc.0", 18, MCF_CLK);
+DEFINE_CLK(0, "intc.1", 19, MCF_CLK);
+DEFINE_CLK(0, "iack.0", 21, MCF_CLK);
+DEFINE_CLK(0, "imx1-i2c.0", 22, MCF_CLK);
+DEFINE_CLK(0, "mcfqspi.0", 23, MCF_CLK);
+DEFINE_CLK(0, "mcfuart.0", 24, MCF_BUSCLK);
+DEFINE_CLK(0, "mcfuart.1", 25, MCF_BUSCLK);
+DEFINE_CLK(0, "mcfuart.2", 26, MCF_BUSCLK);
+DEFINE_CLK(0, "mcftmr.0", 28, MCF_CLK);
+DEFINE_CLK(0, "mcftmr.1", 29, MCF_CLK);
+DEFINE_CLK(0, "mcftmr.2", 30, MCF_CLK);
+DEFINE_CLK(0, "mcftmr.3", 31, MCF_CLK);
+
+DEFINE_CLK(0, "mcfpit.0", 32, MCF_CLK);
+DEFINE_CLK(0, "mcfpit.1", 33, MCF_CLK);
+DEFINE_CLK(0, "mcfpit.2", 34, MCF_CLK);
+DEFINE_CLK(0, "mcfpit.3", 35, MCF_CLK);
+DEFINE_CLK(0, "mcfpwm.0", 36, MCF_CLK);
+DEFINE_CLK(0, "mcfeport.0", 37, MCF_CLK);
+DEFINE_CLK(0, "mcfwdt.0", 38, MCF_CLK);
+DEFINE_CLK(0, "sys.0", 40, MCF_BUSCLK);
+DEFINE_CLK(0, "gpio.0", 41, MCF_BUSCLK);
+DEFINE_CLK(0, "mcfrtc.0", 42, MCF_CLK);
+DEFINE_CLK(0, "mcflcd.0", 43, MCF_CLK);
+DEFINE_CLK(0, "mcfusb-otg.0", 44, MCF_CLK);
+DEFINE_CLK(0, "mcfusb-host.0", 45, MCF_CLK);
+DEFINE_CLK(0, "sdram.0", 46, MCF_CLK);
+DEFINE_CLK(0, "ssi.0", 47, MCF_CLK);
+DEFINE_CLK(0, "pll.0", 48, MCF_CLK);
+
+DEFINE_CLK(1, "mdha.0", 32, MCF_CLK);
+DEFINE_CLK(1, "skha.0", 33, MCF_CLK);
+DEFINE_CLK(1, "rng.0", 34, MCF_CLK);
+
+struct clk *mcf_clks[] = {
+	&__clk_0_2,	/* flexbus */
+	&__clk_0_8,	/* mcfcan.0 */
+	&__clk_0_12,	/* fec.0 */
+	&__clk_0_17,	/* edma */
+	&__clk_0_18,	/* intc.0 */
+	&__clk_0_19,	/* intc.1 */
+	&__clk_0_21,	/* iack.0 */
+	&__clk_0_22,	/* imx1-i2c.0 */
+	&__clk_0_23,	/* mcfqspi.0 */
+	&__clk_0_24,	/* mcfuart.0 */
+	&__clk_0_25,	/* mcfuart.1 */
+	&__clk_0_26,	/* mcfuart.2 */
+	&__clk_0_28,	/* mcftmr.0 */
+	&__clk_0_29,	/* mcftmr.1 */
+	&__clk_0_30,	/* mcftmr.2 */
+	&__clk_0_31,	/* mcftmr.3 */
+
+	&__clk_0_32,	/* mcfpit.0 */
+	&__clk_0_33,	/* mcfpit.1 */
+	&__clk_0_34,	/* mcfpit.2 */
+	&__clk_0_35,	/* mcfpit.3 */
+	&__clk_0_36,	/* mcfpwm.0 */
+	&__clk_0_37,	/* mcfeport.0 */
+	&__clk_0_38,	/* mcfwdt.0 */
+	&__clk_0_40,	/* sys.0 */
+	&__clk_0_41,	/* gpio.0 */
+	&__clk_0_42,	/* mcfrtc.0 */
+	&__clk_0_43,	/* mcflcd.0 */
+	&__clk_0_44,	/* mcfusb-otg.0 */
+	&__clk_0_45,	/* mcfusb-host.0 */
+	&__clk_0_46,	/* sdram.0 */
+	&__clk_0_47,	/* ssi.0 */
+	&__clk_0_48,	/* pll.0 */
+
+	&__clk_1_32,	/* mdha.0 */
+	&__clk_1_33,	/* skha.0 */
+	&__clk_1_34,	/* rng.0 */
+	NULL,
+};
+
+static struct clk * const enable_clks[] __initconst = {
+	&__clk_0_2,	/* flexbus */
+	&__clk_0_18,	/* intc.0 */
+	&__clk_0_19,	/* intc.1 */
+	&__clk_0_21,	/* iack.0 */
+	&__clk_0_24,	/* mcfuart.0 */
+	&__clk_0_25,	/* mcfuart.1 */
+	&__clk_0_26,	/* mcfuart.2 */
+	&__clk_0_28,	/* mcftmr.0 */
+	&__clk_0_29,	/* mcftmr.1 */
+	&__clk_0_32,	/* mcfpit.0 */
+	&__clk_0_33,	/* mcfpit.1 */
+	&__clk_0_37,	/* mcfeport.0 */
+	&__clk_0_40,	/* sys.0 */
+	&__clk_0_41,	/* gpio.0 */
+	&__clk_0_46,	/* sdram.0 */
+	&__clk_0_48,	/* pll.0 */
+};
+
+static struct clk * const disable_clks[] __initconst = {
+	&__clk_0_8,	/* mcfcan.0 */
+	&__clk_0_12,	/* fec.0 */
+	&__clk_0_17,	/* edma */
+	&__clk_0_22,	/* imx1-i2c.0 */
+	&__clk_0_23,	/* mcfqspi.0 */
+	&__clk_0_30,	/* mcftmr.2 */
+	&__clk_0_31,	/* mcftmr.3 */
+	&__clk_0_34,	/* mcfpit.2 */
+	&__clk_0_35,	/* mcfpit.3 */
+	&__clk_0_36,	/* mcfpwm.0 */
+	&__clk_0_38,	/* mcfwdt.0 */
+	&__clk_0_42,	/* mcfrtc.0 */
+	&__clk_0_43,	/* mcflcd.0 */
+	&__clk_0_44,	/* mcfusb-otg.0 */
+	&__clk_0_45,	/* mcfusb-host.0 */
+	&__clk_0_47,	/* ssi.0 */
+	&__clk_1_32,	/* mdha.0 */
+	&__clk_1_33,	/* skha.0 */
+	&__clk_1_34,	/* rng.0 */
+};
+
+
+static void __init m53xx_clk_init(void)
+{
+	unsigned i;
+
+	/* make sure these clocks are enabled */
+	for (i = 0; i < ARRAY_SIZE(enable_clks); ++i)
+		__clk_init_enabled(enable_clks[i]);
+	/* make sure these clocks are disabled */
+	for (i = 0; i < ARRAY_SIZE(disable_clks); ++i)
+		__clk_init_disabled(disable_clks[i]);
+}
+
+/***************************************************************************/
+
+static void __init m53xx_qspi_init(void)
+{
+#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI)
+	/* setup QSPS pins for QSPI with gpio CS control */
+	writew(0x01f0, MCFGPIO_PAR_QSPI);
+#endif /* IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI) */
+}
+
+/***************************************************************************/
+
+static void __init m53xx_i2c_init(void)
+{
+#if IS_ENABLED(CONFIG_I2C_IMX)
+	/* setup Port AS Pin Assignment Register for I2C */
+	/*  set PASPA0 to SCL and PASPA1 to SDA */
+	u8 r = readb(MCFGPIO_PAR_FECI2C);
+	r |= 0x0f;
+	writeb(r, MCFGPIO_PAR_FECI2C);
+#endif /* IS_ENABLED(CONFIG_I2C_IMX) */
+}
+
+/***************************************************************************/
+
+static void __init m53xx_uarts_init(void)
+{
+	/* UART GPIO initialization */
+	writew(readw(MCFGPIO_PAR_UART) | 0x0FFF, MCFGPIO_PAR_UART);
+}
+
+/***************************************************************************/
+
+static void __init m53xx_fec_init(void)
+{
+	u8 v;
+
+	/* Set multi-function pins to ethernet mode for fec0 */
+	v = readb(MCFGPIO_PAR_FECI2C);
+	v |= MCF_GPIO_PAR_FECI2C_PAR_MDC_EMDC |
+		MCF_GPIO_PAR_FECI2C_PAR_MDIO_EMDIO;
+	writeb(v, MCFGPIO_PAR_FECI2C);
+
+	v = readb(MCFGPIO_PAR_FEC);
+	v = MCF_GPIO_PAR_FEC_PAR_FEC_7W_FEC | MCF_GPIO_PAR_FEC_PAR_FEC_MII_FEC;
+	writeb(v, MCFGPIO_PAR_FEC);
+}
+
+/***************************************************************************/
+
+void __init config_BSP(char *commandp, int size)
+{
+#if !defined(CONFIG_BOOTPARAM)
+	/* Copy command line from FLASH to local buffer... */
+	memcpy(commandp, (char *) 0x4000, 4);
+	if(strncmp(commandp, "kcl ", 4) == 0){
+		memcpy(commandp, (char *) 0x4004, size);
+		commandp[size-1] = 0;
+	} else {
+		memset(commandp, 0, size);
+	}
+#endif
+	mach_sched_init = hw_timer_init;
+	m53xx_clk_init();
+	m53xx_uarts_init();
+	m53xx_fec_init();
+	m53xx_qspi_init();
+	m53xx_i2c_init();
+
+#ifdef CONFIG_BDM_DISABLE
+	/*
+	 * Disable the BDM clocking.  This also turns off most of the rest of
+	 * the BDM device.  This is good for EMC reasons. This option is not
+	 * incompatible with the memory protection option.
+	 */
+	wdebug(MCFDEBUG_CSR, MCFDEBUG_CSR_PSTCLK);
+#endif
+}
+
+/***************************************************************************/
+/* Board initialization */
+/***************************************************************************/
+/* 
+ * PLL min/max specifications
+ */
+#define MAX_FVCO	500000	/* KHz */
+#define MAX_FSYS	80000 	/* KHz */
+#define MIN_FSYS	58333 	/* KHz */
+#define FREF		16000   /* KHz */
+
+
+#define MAX_MFD		135     /* Multiplier */
+#define MIN_MFD		88      /* Multiplier */
+#define BUSDIV		6       /* Divider */
+
+/*
+ * Low Power Divider specifications
+ */
+#define MIN_LPD		(1 << 0)    /* Divider (not encoded) */
+#define MAX_LPD		(1 << 15)   /* Divider (not encoded) */
+#define DEFAULT_LPD	(1 << 1)	/* Divider (not encoded) */
+
+#define SYS_CLK_KHZ	80000
+#define SYSTEM_PERIOD	12.5
+/*
+ *  SDRAM Timing Parameters
+ */  
+#define SDRAM_BL	8	/* # of beats in a burst */
+#define SDRAM_TWR	2	/* in clocks */
+#define SDRAM_CASL	2.5	/* CASL in clocks */
+#define SDRAM_TRCD	2	/* in clocks */
+#define SDRAM_TRP	2	/* in clocks */
+#define SDRAM_TRFC	7	/* in clocks */
+#define SDRAM_TREFI	7800	/* in ns */
+
+#define EXT_SRAM_ADDRESS	(0xC0000000)
+#define FLASH_ADDRESS		(0x00000000)
+#define SDRAM_ADDRESS		(0x40000000)
+
+#define NAND_FLASH_ADDRESS	(0xD0000000)
+
+void wtm_init(void);
+void scm_init(void);
+void gpio_init(void);
+void fbcs_init(void);
+void sdramc_init(void);
+int  clock_pll (int fsys, int flags);
+int  clock_limp (int);
+int  clock_exit_limp (void);
+int  get_sys_clock (void);
+
+asmlinkage void __init sysinit(void)
+{
+	clock_pll(0, 0);
+
+	wtm_init();
+	scm_init();
+	gpio_init();
+	fbcs_init();
+	sdramc_init();
+}
+
+void wtm_init(void)
+{
+	/* Disable watchdog timer */
+	writew(0, MCF_WTM_WCR);
+}
+
+#define MCF_SCM_BCR_GBW		(0x00000100)
+#define MCF_SCM_BCR_GBR		(0x00000200)
+
+void scm_init(void)
+{
+	/* All masters are trusted */
+	writel(0x77777777, MCF_SCM_MPR);
+    
+	/* Allow supervisor/user, read/write, and trusted/untrusted
+	   access to all slaves */
+	writel(0, MCF_SCM_PACRA);
+	writel(0, MCF_SCM_PACRB);
+	writel(0, MCF_SCM_PACRC);
+	writel(0, MCF_SCM_PACRD);
+	writel(0, MCF_SCM_PACRE);
+	writel(0, MCF_SCM_PACRF);
+
+	/* Enable bursts */
+	writel(MCF_SCM_BCR_GBR | MCF_SCM_BCR_GBW, MCF_SCM_BCR);
+}
+
+
+void fbcs_init(void)
+{
+	writeb(0x3E, MCFGPIO_PAR_CS);
+
+	/* Latch chip select */
+	writel(0x10080000, MCF_FBCS1_CSAR);
+
+	writel(0x002A3780, MCF_FBCS1_CSCR);
+	writel(MCF_FBCS_CSMR_BAM_2M | MCF_FBCS_CSMR_V, MCF_FBCS1_CSMR);
+
+	/* Initialize latch to drive signals to inactive states */
+	writew(0xffff, 0x10080000);
+
+	/* External SRAM */
+	writel(EXT_SRAM_ADDRESS, MCF_FBCS1_CSAR);
+	writel(MCF_FBCS_CSCR_PS_16 |
+		MCF_FBCS_CSCR_AA |
+		MCF_FBCS_CSCR_SBM |
+		MCF_FBCS_CSCR_WS(1),
+		MCF_FBCS1_CSCR);
+	writel(MCF_FBCS_CSMR_BAM_512K | MCF_FBCS_CSMR_V, MCF_FBCS1_CSMR);
+
+	/* Boot Flash connected to FBCS0 */
+	writel(FLASH_ADDRESS, MCF_FBCS0_CSAR);
+	writel(MCF_FBCS_CSCR_PS_16 |
+		MCF_FBCS_CSCR_BEM |
+		MCF_FBCS_CSCR_AA |
+		MCF_FBCS_CSCR_SBM |
+		MCF_FBCS_CSCR_WS(7),
+		MCF_FBCS0_CSCR);
+	writel(MCF_FBCS_CSMR_BAM_32M | MCF_FBCS_CSMR_V, MCF_FBCS0_CSMR);
+}
+
+void sdramc_init(void)
+{
+	/*
+	 * Check to see if the SDRAM has already been initialized
+	 * by a run control tool
+	 */
+	if (!(readl(MCF_SDRAMC_SDCR) & MCF_SDRAMC_SDCR_REF)) {
+		/* SDRAM chip select initialization */
+		
+		/* Initialize SDRAM chip select */
+		writel(MCF_SDRAMC_SDCS_BA(SDRAM_ADDRESS) |
+			MCF_SDRAMC_SDCS_CSSZ(MCF_SDRAMC_SDCS_CSSZ_32MBYTE),
+			MCF_SDRAMC_SDCS0);
+
+	/*
+	 * Basic configuration and initialization
+	 */
+	writel(MCF_SDRAMC_SDCFG1_SRD2RW((int)((SDRAM_CASL + 2) + 0.5)) |
+		MCF_SDRAMC_SDCFG1_SWT2RD(SDRAM_TWR + 1) |
+		MCF_SDRAMC_SDCFG1_RDLAT((int)((SDRAM_CASL * 2) + 2)) |
+		MCF_SDRAMC_SDCFG1_ACT2RW((int)(SDRAM_TRCD + 0.5)) |
+		MCF_SDRAMC_SDCFG1_PRE2ACT((int)(SDRAM_TRP + 0.5)) |
+		MCF_SDRAMC_SDCFG1_REF2ACT((int)(SDRAM_TRFC + 0.5)) |
+		MCF_SDRAMC_SDCFG1_WTLAT(3),
+		MCF_SDRAMC_SDCFG1);
+	writel(MCF_SDRAMC_SDCFG2_BRD2PRE(SDRAM_BL / 2 + 1) |
+		MCF_SDRAMC_SDCFG2_BWT2RW(SDRAM_BL / 2 + SDRAM_TWR) |
+		MCF_SDRAMC_SDCFG2_BRD2WT((int)((SDRAM_CASL + SDRAM_BL / 2 - 1.0) + 0.5)) |
+		MCF_SDRAMC_SDCFG2_BL(SDRAM_BL - 1),
+		MCF_SDRAMC_SDCFG2);
+
+            
+	/*
+	 * Precharge and enable write to SDMR
+	 */
+	writel(MCF_SDRAMC_SDCR_MODE_EN |
+		MCF_SDRAMC_SDCR_CKE |
+		MCF_SDRAMC_SDCR_DDR |
+		MCF_SDRAMC_SDCR_MUX(1) |
+		MCF_SDRAMC_SDCR_RCNT((int)(((SDRAM_TREFI / (SYSTEM_PERIOD * 64)) - 1) + 0.5)) |
+		MCF_SDRAMC_SDCR_PS_16 |
+		MCF_SDRAMC_SDCR_IPALL,
+		MCF_SDRAMC_SDCR);
+
+	/*
+	 * Write extended mode register
+	 */
+	writel(MCF_SDRAMC_SDMR_BNKAD_LEMR |
+		MCF_SDRAMC_SDMR_AD(0x0) |
+		MCF_SDRAMC_SDMR_CMD,
+		MCF_SDRAMC_SDMR);
+
+	/*
+	 * Write mode register and reset DLL
+	 */
+	writel(MCF_SDRAMC_SDMR_BNKAD_LMR |
+		MCF_SDRAMC_SDMR_AD(0x163) |
+		MCF_SDRAMC_SDMR_CMD,
+		MCF_SDRAMC_SDMR);
+
+	/*
+	 * Execute a PALL command
+	 */
+	writel(readl(MCF_SDRAMC_SDCR) | MCF_SDRAMC_SDCR_IPALL, MCF_SDRAMC_SDCR);
+
+	/*
+	 * Perform two REF cycles
+	 */
+	writel(readl(MCF_SDRAMC_SDCR) | MCF_SDRAMC_SDCR_IREF, MCF_SDRAMC_SDCR);
+	writel(readl(MCF_SDRAMC_SDCR) | MCF_SDRAMC_SDCR_IREF, MCF_SDRAMC_SDCR);
+
+	/*
+	 * Write mode register and clear reset DLL
+	 */
+	writel(MCF_SDRAMC_SDMR_BNKAD_LMR |
+		MCF_SDRAMC_SDMR_AD(0x063) |
+		MCF_SDRAMC_SDMR_CMD,
+		MCF_SDRAMC_SDMR);
+				
+	/*
+	 * Enable auto refresh and lock SDMR
+	 */
+	writel(readl(MCF_SDRAMC_SDCR) & ~MCF_SDRAMC_SDCR_MODE_EN,
+		MCF_SDRAMC_SDCR);
+	writel(MCF_SDRAMC_SDCR_REF | MCF_SDRAMC_SDCR_DQS_OE(0xC),
+		MCF_SDRAMC_SDCR);
+	}
+}
+
+void gpio_init(void)
+{
+	/* Enable UART0 pins */
+	writew(MCF_GPIO_PAR_UART_PAR_URXD0 | MCF_GPIO_PAR_UART_PAR_UTXD0,
+		MCFGPIO_PAR_UART);
+
+	/*
+	 * Initialize TIN3 as a GPIO output to enable the write
+	 * half of the latch.
+	 */
+	writeb(0x00, MCFGPIO_PAR_TIMER);
+	writeb(0x08, MCFGPIO_PDDR_TIMER);
+	writeb(0x00, MCFGPIO_PCLRR_TIMER);
+}
+
+int clock_pll(int fsys, int flags)
+{
+	int fref, temp, fout, mfd;
+	u32 i;
+
+	fref = FREF;
+        
+	if (fsys == 0) {
+		/* Return current PLL output */
+		mfd = readb(MCF_PLL_PFDR);
+
+		return (fref * mfd / (BUSDIV * 4));
+	}
+
+	/* Check bounds of requested system clock */
+	if (fsys > MAX_FSYS)
+		fsys = MAX_FSYS;
+	if (fsys < MIN_FSYS)
+		fsys = MIN_FSYS;
+
+	/* Multiplying by 100 when calculating the temp value,
+	   and then dividing by 100 to calculate the mfd allows
+	   for exact values without needing to include floating
+	   point libraries. */
+	temp = 100 * fsys / fref;
+	mfd = 4 * BUSDIV * temp / 100;
+    	    	    	
+	/* Determine the output frequency for selected values */
+	fout = (fref * mfd / (BUSDIV * 4));
+
+	/*
+	 * Check to see if the SDRAM has already been initialized.
+	 * If it has then the SDRAM needs to be put into self refresh
+	 * mode before reprogramming the PLL.
+	 */
+	if (readl(MCF_SDRAMC_SDCR) & MCF_SDRAMC_SDCR_REF)
+		/* Put SDRAM into self refresh mode */
+		writel(readl(MCF_SDRAMC_SDCR) & ~MCF_SDRAMC_SDCR_CKE,
+			MCF_SDRAMC_SDCR);
+
+	/*
+	 * Initialize the PLL to generate the new system clock frequency.
+	 * The device must be put into LIMP mode to reprogram the PLL.
+	 */
+
+	/* Enter LIMP mode */
+	clock_limp(DEFAULT_LPD);
+     					
+	/* Reprogram PLL for desired fsys */
+	writeb(MCF_PLL_PODR_CPUDIV(BUSDIV/3) | MCF_PLL_PODR_BUSDIV(BUSDIV),
+		MCF_PLL_PODR);
+						
+	writeb(mfd, MCF_PLL_PFDR);
+		
+	/* Exit LIMP mode */
+	clock_exit_limp();
+	
+	/*
+	 * Return the SDRAM to normal operation if it is in use.
+	 */
+	if (readl(MCF_SDRAMC_SDCR) & MCF_SDRAMC_SDCR_REF)
+		/* Exit self refresh mode */
+		writel(readl(MCF_SDRAMC_SDCR) | MCF_SDRAMC_SDCR_CKE,
+			MCF_SDRAMC_SDCR);
+
+	/* Errata - workaround for SDRAM opeartion after exiting LIMP mode */
+	writel(MCF_SDRAMC_REFRESH, MCF_SDRAMC_LIMP_FIX);
+
+	/* wait for DQS logic to relock */
+	for (i = 0; i < 0x200; i++)
+		;
+
+	return fout;
+}
+
+int clock_limp(int div)
+{
+	u32 temp;
+
+	/* Check bounds of divider */
+	if (div < MIN_LPD)
+		div = MIN_LPD;
+	if (div > MAX_LPD)
+		div = MAX_LPD;
+    
+	/* Save of the current value of the SSIDIV so we don't
+	   overwrite the value*/
+	temp = readw(MCF_CCM_CDR) & MCF_CCM_CDR_SSIDIV(0xF);
+      
+	/* Apply the divider to the system clock */
+	writew(MCF_CCM_CDR_LPDIV(div) | MCF_CCM_CDR_SSIDIV(temp), MCF_CCM_CDR);
+    
+	writew(readw(MCF_CCM_MISCCR) | MCF_CCM_MISCCR_LIMP, MCF_CCM_MISCCR);
+    
+	return (FREF/(3*(1 << div)));
+}
+
+int clock_exit_limp(void)
+{
+	int fout;
+	
+	/* Exit LIMP mode */
+	writew(readw(MCF_CCM_MISCCR) & ~MCF_CCM_MISCCR_LIMP, MCF_CCM_MISCCR);
+
+	/* Wait for PLL to lock */
+	while (!(readw(MCF_CCM_MISCCR) & MCF_CCM_MISCCR_PLL_LOCK))
+		;
+	
+	fout = get_sys_clock();
+
+	return fout;
+}
+
+int get_sys_clock(void)
+{
+	int divider;
+	
+	/* Test to see if device is in LIMP mode */
+	if (readw(MCF_CCM_MISCCR) & MCF_CCM_MISCCR_LIMP) {
+		divider = readw(MCF_CCM_CDR) & MCF_CCM_CDR_LPDIV(0xF);
+		return (FREF/(2 << divider));
+	}
+	else
+		return (FREF * readb(MCF_PLL_PFDR)) / (BUSDIV * 4);
+}
diff --git a/arch/m68k/coldfire/m5407.c b/arch/m68k/coldfire/m5407.c
new file mode 100644
index 000000000..0400d7611
--- /dev/null
+++ b/arch/m68k/coldfire/m5407.c
@@ -0,0 +1,68 @@
+// SPDX-License-Identifier: GPL-2.0
+/***************************************************************************/
+
+/*
+ *	m5407.c  -- platform support for ColdFire 5407 based boards
+ *
+ *	Copyright (C) 1999-2002, Greg Ungerer (gerg@snapgear.com)
+ *	Copyright (C) 2000, Lineo (www.lineo.com)
+ */
+
+/***************************************************************************/
+
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <asm/machdep.h>
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+#include <asm/mcfclk.h>
+
+/***************************************************************************/
+
+DEFINE_CLK(pll, "pll.0", MCF_CLK);
+DEFINE_CLK(sys, "sys.0", MCF_BUSCLK);
+DEFINE_CLK(mcftmr0, "mcftmr.0", MCF_BUSCLK);
+DEFINE_CLK(mcftmr1, "mcftmr.1", MCF_BUSCLK);
+DEFINE_CLK(mcfuart0, "mcfuart.0", MCF_BUSCLK);
+DEFINE_CLK(mcfuart1, "mcfuart.1", MCF_BUSCLK);
+DEFINE_CLK(mcfi2c0, "imx1-i2c.0", MCF_BUSCLK);
+
+struct clk *mcf_clks[] = {
+	&clk_pll,
+	&clk_sys,
+	&clk_mcftmr0,
+	&clk_mcftmr1,
+	&clk_mcfuart0,
+	&clk_mcfuart1,
+	&clk_mcfi2c0,
+	NULL
+};
+
+/***************************************************************************/
+
+static void __init m5407_i2c_init(void)
+{
+#if IS_ENABLED(CONFIG_I2C_IMX)
+	writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL5 | MCFSIM_ICR_PRI0,
+	       MCFSIM_I2CICR);
+	mcf_mapirq2imr(MCF_IRQ_I2C0, MCFINTC_I2C);
+#endif /* IS_ENABLED(CONFIG_I2C_IMX) */
+}
+
+/***************************************************************************/
+
+void __init config_BSP(char *commandp, int size)
+{
+	mach_sched_init = hw_timer_init;
+
+	/* Only support the external interrupts on their primary level */
+	mcf_mapirq2imr(25, MCFINTC_EINT1);
+	mcf_mapirq2imr(27, MCFINTC_EINT3);
+	mcf_mapirq2imr(29, MCFINTC_EINT5);
+	mcf_mapirq2imr(31, MCFINTC_EINT7);
+	m5407_i2c_init();
+}
+
+/***************************************************************************/
diff --git a/arch/m68k/coldfire/m5441x.c b/arch/m68k/coldfire/m5441x.c
new file mode 100644
index 000000000..55392af84
--- /dev/null
+++ b/arch/m68k/coldfire/m5441x.c
@@ -0,0 +1,226 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ *	m5441x.c -- support for Coldfire m5441x processors
+ *
+ *	(C) Copyright Steven King <sfking@fdwdc.com>
+ */
+
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+#include <asm/machdep.h>
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+#include <asm/mcfuart.h>
+#include <asm/mcfdma.h>
+#include <asm/mcfclk.h>
+
+DEFINE_CLK(0, "flexbus", 2, MCF_CLK);
+DEFINE_CLK(0, "mcfcan.0", 8, MCF_CLK);
+DEFINE_CLK(0, "mcfcan.1", 9, MCF_CLK);
+DEFINE_CLK(0, "imx1-i2c.1", 14, MCF_CLK);
+DEFINE_CLK(0, "mcfdspi.1", 15, MCF_CLK);
+DEFINE_CLK(0, "edma", 17, MCF_CLK);
+DEFINE_CLK(0, "intc.0", 18, MCF_CLK);
+DEFINE_CLK(0, "intc.1", 19, MCF_CLK);
+DEFINE_CLK(0, "intc.2", 20, MCF_CLK);
+DEFINE_CLK(0, "imx1-i2c.0", 22, MCF_CLK);
+DEFINE_CLK(0, "fsl-dspi.0", 23, MCF_CLK);
+DEFINE_CLK(0, "mcfuart.0", 24, MCF_BUSCLK);
+DEFINE_CLK(0, "mcfuart.1", 25, MCF_BUSCLK);
+DEFINE_CLK(0, "mcfuart.2", 26, MCF_BUSCLK);
+DEFINE_CLK(0, "mcfuart.3", 27, MCF_BUSCLK);
+DEFINE_CLK(0, "mcftmr.0", 28, MCF_CLK);
+DEFINE_CLK(0, "mcftmr.1", 29, MCF_CLK);
+DEFINE_CLK(0, "mcftmr.2", 30, MCF_CLK);
+DEFINE_CLK(0, "mcftmr.3", 31, MCF_CLK);
+DEFINE_CLK(0, "mcfpit.0", 32, MCF_CLK);
+DEFINE_CLK(0, "mcfpit.1", 33, MCF_CLK);
+DEFINE_CLK(0, "mcfpit.2", 34, MCF_CLK);
+DEFINE_CLK(0, "mcfpit.3", 35, MCF_CLK);
+DEFINE_CLK(0, "mcfeport.0", 37, MCF_CLK);
+DEFINE_CLK(0, "mcfadc.0", 38, MCF_CLK);
+DEFINE_CLK(0, "mcfdac.0", 39, MCF_CLK);
+DEFINE_CLK(0, "mcfrtc.0", 42, MCF_CLK);
+DEFINE_CLK(0, "mcfsim.0", 43, MCF_CLK);
+DEFINE_CLK(0, "mcfusb-otg.0", 44, MCF_CLK);
+DEFINE_CLK(0, "mcfusb-host.0", 45, MCF_CLK);
+DEFINE_CLK(0, "mcfddr-sram.0", 46, MCF_CLK);
+DEFINE_CLK(0, "mcfssi.0", 47, MCF_CLK);
+DEFINE_CLK(0, "pll.0", 48, MCF_CLK);
+DEFINE_CLK(0, "mcfrng.0", 49, MCF_CLK);
+DEFINE_CLK(0, "mcfssi.1", 50, MCF_CLK);
+DEFINE_CLK(0, "mcfsdhc.0", 51, MCF_CLK);
+DEFINE_CLK(0, "enet-fec.0", 53, MCF_CLK);
+DEFINE_CLK(0, "enet-fec.1", 54, MCF_CLK);
+DEFINE_CLK(0, "switch.0", 55, MCF_CLK);
+DEFINE_CLK(0, "switch.1", 56, MCF_CLK);
+DEFINE_CLK(0, "nand.0", 63, MCF_CLK);
+
+DEFINE_CLK(1, "mcfow.0", 2, MCF_CLK);
+DEFINE_CLK(1, "imx1-i2c.2", 4, MCF_CLK);
+DEFINE_CLK(1, "imx1-i2c.3", 5, MCF_CLK);
+DEFINE_CLK(1, "imx1-i2c.4", 6, MCF_CLK);
+DEFINE_CLK(1, "imx1-i2c.5", 7, MCF_CLK);
+DEFINE_CLK(1, "mcfuart.4", 24, MCF_BUSCLK);
+DEFINE_CLK(1, "mcfuart.5", 25, MCF_BUSCLK);
+DEFINE_CLK(1, "mcfuart.6", 26, MCF_BUSCLK);
+DEFINE_CLK(1, "mcfuart.7", 27, MCF_BUSCLK);
+DEFINE_CLK(1, "mcfuart.8", 28, MCF_BUSCLK);
+DEFINE_CLK(1, "mcfuart.9", 29, MCF_BUSCLK);
+DEFINE_CLK(1, "mcfpwm.0", 34, MCF_BUSCLK);
+DEFINE_CLK(1, "sys.0", 36, MCF_BUSCLK);
+DEFINE_CLK(1, "gpio.0", 37, MCF_BUSCLK);
+
+struct clk *mcf_clks[] = {
+	&__clk_0_2,
+	&__clk_0_8,
+	&__clk_0_9,
+	&__clk_0_14,
+	&__clk_0_15,
+	&__clk_0_17,
+	&__clk_0_18,
+	&__clk_0_19,
+	&__clk_0_20,
+	&__clk_0_22,
+	&__clk_0_23,
+	&__clk_0_24,
+	&__clk_0_25,
+	&__clk_0_26,
+	&__clk_0_27,
+	&__clk_0_28,
+	&__clk_0_29,
+	&__clk_0_30,
+	&__clk_0_31,
+	&__clk_0_32,
+	&__clk_0_33,
+	&__clk_0_34,
+	&__clk_0_35,
+	&__clk_0_37,
+	&__clk_0_38,
+	&__clk_0_39,
+	&__clk_0_42,
+	&__clk_0_43,
+	&__clk_0_44,
+	&__clk_0_45,
+	&__clk_0_46,
+	&__clk_0_47,
+	&__clk_0_48,
+	&__clk_0_49,
+	&__clk_0_50,
+	&__clk_0_51,
+	&__clk_0_53,
+	&__clk_0_54,
+	&__clk_0_55,
+	&__clk_0_56,
+	&__clk_0_63,
+
+	&__clk_1_2,
+	&__clk_1_4,
+	&__clk_1_5,
+	&__clk_1_6,
+	&__clk_1_7,
+	&__clk_1_24,
+	&__clk_1_25,
+	&__clk_1_26,
+	&__clk_1_27,
+	&__clk_1_28,
+	&__clk_1_29,
+	&__clk_1_34,
+	&__clk_1_36,
+	&__clk_1_37,
+	NULL,
+};
+
+
+static struct clk * const enable_clks[] __initconst = {
+	/* make sure these clocks are enabled */
+	&__clk_0_18, /* intc0 */
+	&__clk_0_19, /* intc0 */
+	&__clk_0_20, /* intc0 */
+	&__clk_0_23, /* dspi.0 */
+	&__clk_0_24, /* uart0 */
+	&__clk_0_25, /* uart1 */
+	&__clk_0_26, /* uart2 */
+	&__clk_0_27, /* uart3 */
+
+	&__clk_0_33, /* pit.1 */
+	&__clk_0_37, /* eport */
+	&__clk_0_48, /* pll */
+
+	&__clk_1_36, /* CCM/reset module/Power management */
+	&__clk_1_37, /* gpio */
+};
+static struct clk * const disable_clks[] __initconst = {
+	&__clk_0_8, /* can.0 */
+	&__clk_0_9, /* can.1 */
+	&__clk_0_14, /* i2c.1 */
+	&__clk_0_15, /* dspi.1 */
+	&__clk_0_17, /* eDMA */
+	&__clk_0_22, /* i2c.0 */
+	&__clk_0_23, /* dspi.0 */
+	&__clk_0_28, /* tmr.1 */
+	&__clk_0_29, /* tmr.2 */
+	&__clk_0_30, /* tmr.2 */
+	&__clk_0_31, /* tmr.3 */
+	&__clk_0_32, /* pit.0 */
+	&__clk_0_34, /* pit.2 */
+	&__clk_0_35, /* pit.3 */
+	&__clk_0_38, /* adc */
+	&__clk_0_39, /* dac */
+	&__clk_0_44, /* usb otg */
+	&__clk_0_45, /* usb host */
+	&__clk_0_47, /* ssi.0 */
+	&__clk_0_49, /* rng */
+	&__clk_0_50, /* ssi.1 */
+	&__clk_0_51, /* eSDHC */
+	&__clk_0_53, /* enet-fec */
+	&__clk_0_54, /* enet-fec */
+	&__clk_0_55, /* switch.0 */
+	&__clk_0_56, /* switch.1 */
+
+	&__clk_1_2, /* 1-wire */
+	&__clk_1_4, /* i2c.2 */
+	&__clk_1_5, /* i2c.3 */
+	&__clk_1_6, /* i2c.4 */
+	&__clk_1_7, /* i2c.5 */
+	&__clk_1_24, /* uart 4 */
+	&__clk_1_25, /* uart 5 */
+	&__clk_1_26, /* uart 6 */
+	&__clk_1_27, /* uart 7 */
+	&__clk_1_28, /* uart 8 */
+	&__clk_1_29, /* uart 9 */
+};
+
+static void __init m5441x_clk_init(void)
+{
+	unsigned i;
+
+	for (i = 0; i < ARRAY_SIZE(enable_clks); ++i)
+		__clk_init_enabled(enable_clks[i]);
+	/* make sure these clocks are disabled */
+	for (i = 0; i < ARRAY_SIZE(disable_clks); ++i)
+		__clk_init_disabled(disable_clks[i]);
+}
+
+static void __init m5441x_uarts_init(void)
+{
+	__raw_writeb(0x0f, MCFGPIO_PAR_UART0);
+	__raw_writeb(0x00, MCFGPIO_PAR_UART1);
+	__raw_writeb(0x00, MCFGPIO_PAR_UART2);
+}
+
+static void __init m5441x_fec_init(void)
+{
+	__raw_writeb(0x03, MCFGPIO_PAR_FEC);
+}
+
+void __init config_BSP(char *commandp, int size)
+{
+	m5441x_clk_init();
+	mach_sched_init = hw_timer_init;
+	m5441x_uarts_init();
+	m5441x_fec_init();
+}
diff --git a/arch/m68k/coldfire/m54xx.c b/arch/m68k/coldfire/m54xx.c
new file mode 100644
index 000000000..adad03ca6
--- /dev/null
+++ b/arch/m68k/coldfire/m54xx.c
@@ -0,0 +1,105 @@
+// SPDX-License-Identifier: GPL-2.0
+/***************************************************************************/
+
+/*
+ *	m54xx.c  -- platform support for ColdFire 54xx based boards
+ *
+ *	Copyright (C) 2010, Philippe De Muyter <phdm@macqel.be>
+ */
+
+/***************************************************************************/
+
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/mm.h>
+#include <linux/clk.h>
+#include <linux/bootmem.h>
+#include <asm/pgalloc.h>
+#include <asm/machdep.h>
+#include <asm/coldfire.h>
+#include <asm/m54xxsim.h>
+#include <asm/mcfuart.h>
+#include <asm/mcfclk.h>
+#include <asm/m54xxgpt.h>
+#ifdef CONFIG_MMU
+#include <asm/mmu_context.h>
+#endif
+
+/***************************************************************************/
+
+DEFINE_CLK(pll, "pll.0", MCF_CLK);
+DEFINE_CLK(sys, "sys.0", MCF_BUSCLK);
+DEFINE_CLK(mcfslt0, "mcfslt.0", MCF_BUSCLK);
+DEFINE_CLK(mcfslt1, "mcfslt.1", MCF_BUSCLK);
+DEFINE_CLK(mcfuart0, "mcfuart.0", MCF_BUSCLK);
+DEFINE_CLK(mcfuart1, "mcfuart.1", MCF_BUSCLK);
+DEFINE_CLK(mcfuart2, "mcfuart.2", MCF_BUSCLK);
+DEFINE_CLK(mcfuart3, "mcfuart.3", MCF_BUSCLK);
+DEFINE_CLK(mcfi2c0, "imx1-i2c.0", MCF_BUSCLK);
+
+struct clk *mcf_clks[] = {
+	&clk_pll,
+	&clk_sys,
+	&clk_mcfslt0,
+	&clk_mcfslt1,
+	&clk_mcfuart0,
+	&clk_mcfuart1,
+	&clk_mcfuart2,
+	&clk_mcfuart3,
+	&clk_mcfi2c0,
+	NULL
+};
+
+/***************************************************************************/
+
+static void __init m54xx_uarts_init(void)
+{
+	/* enable io pins */
+	__raw_writeb(MCF_PAR_PSC_TXD | MCF_PAR_PSC_RXD, MCFGPIO_PAR_PSC0);
+	__raw_writeb(MCF_PAR_PSC_TXD | MCF_PAR_PSC_RXD | MCF_PAR_PSC_RTS_RTS,
+		MCFGPIO_PAR_PSC1);
+	__raw_writeb(MCF_PAR_PSC_TXD | MCF_PAR_PSC_RXD | MCF_PAR_PSC_RTS_RTS |
+		MCF_PAR_PSC_CTS_CTS, MCFGPIO_PAR_PSC2);
+	__raw_writeb(MCF_PAR_PSC_TXD | MCF_PAR_PSC_RXD, MCFGPIO_PAR_PSC3);
+}
+
+/***************************************************************************/
+
+static void __init m54xx_i2c_init(void)
+{
+#if IS_ENABLED(CONFIG_I2C_IMX)
+	u32 r;
+
+	/* set the fec/i2c/irq pin assignment register for i2c */
+	r = readl(MCF_PAR_FECI2CIRQ);
+	r |= MCF_PAR_FECI2CIRQ_SDA | MCF_PAR_FECI2CIRQ_SCL;
+	writel(r, MCF_PAR_FECI2CIRQ);
+#endif /* IS_ENABLED(CONFIG_I2C_IMX) */
+}
+
+/***************************************************************************/
+
+static void mcf54xx_reset(void)
+{
+	/* disable interrupts and enable the watchdog */
+	asm("movew #0x2700, %sr\n");
+	__raw_writel(0, MCF_GPT_GMS0);
+	__raw_writel(MCF_GPT_GCIR_CNT(1), MCF_GPT_GCIR0);
+	__raw_writel(MCF_GPT_GMS_WDEN | MCF_GPT_GMS_CE | MCF_GPT_GMS_TMS(4),
+		MCF_GPT_GMS0);
+}
+
+/***************************************************************************/
+
+void __init config_BSP(char *commandp, int size)
+{
+	mach_reset = mcf54xx_reset;
+	mach_sched_init = hw_timer_init;
+	m54xx_uarts_init();
+	m54xx_i2c_init();
+}
+
+/***************************************************************************/
diff --git a/arch/m68k/coldfire/mcf8390.c b/arch/m68k/coldfire/mcf8390.c
new file mode 100644
index 000000000..23a6874a3
--- /dev/null
+++ b/arch/m68k/coldfire/mcf8390.c
@@ -0,0 +1,38 @@
+/*
+ * mcf8390.c  -- platform support for 8390 ethernet on many boards
+ *
+ * (C) Copyright 2012, Greg Ungerer <gerg@uclinux.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file COPYING in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/resource.h>
+#include <linux/platform_device.h>
+#include <asm/mcf8390.h>
+
+static struct resource mcf8390_resources[] = {
+	{
+		.start	= NE2000_ADDR,
+		.end	= NE2000_ADDR + NE2000_ADDRSIZE - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= NE2000_IRQ_VECTOR,
+		.end	= NE2000_IRQ_VECTOR,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static int __init mcf8390_platform_init(void)
+{
+	platform_device_register_simple("mcf8390", -1, mcf8390_resources,
+		ARRAY_SIZE(mcf8390_resources));
+	return 0;
+}
+
+arch_initcall(mcf8390_platform_init);
diff --git a/arch/m68k/coldfire/nettel.c b/arch/m68k/coldfire/nettel.c
new file mode 100644
index 000000000..ea8df6e7a
--- /dev/null
+++ b/arch/m68k/coldfire/nettel.c
@@ -0,0 +1,154 @@
+// SPDX-License-Identifier: GPL-2.0
+/***************************************************************************/
+
+/*
+ *	nettel.c -- startup code support for the NETtel boards
+ *
+ *	Copyright (C) 2009, Greg Ungerer (gerg@snapgear.com)
+ */
+
+/***************************************************************************/
+
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+#include <asm/nettel.h>
+
+/***************************************************************************/
+
+/*
+ * Define the IO and interrupt resources of the 2 SMC9196 interfaces.
+ */
+#define	NETTEL_SMC0_ADDR	0x30600300
+#define	NETTEL_SMC0_IRQ		29
+
+#define	NETTEL_SMC1_ADDR	0x30600000
+#define	NETTEL_SMC1_IRQ		27
+
+/*
+ * We need some access into the SMC9196 registers. Define those registers
+ * we will need here (including the smc91x.h doesn't seem to give us these
+ * in a simple form).
+ */
+#define	SMC91xx_BANKSELECT	14
+#define	SMC91xx_BASEADDR	2
+#define	SMC91xx_BASEMAC		4
+
+/***************************************************************************/
+
+static struct resource nettel_smc91x_0_resources[] = {
+	{
+		.start		= NETTEL_SMC0_ADDR,
+		.end		= NETTEL_SMC0_ADDR + 0x20,
+		.flags		= IORESOURCE_MEM,
+	},
+	{
+		.start		= NETTEL_SMC0_IRQ,
+		.end		= NETTEL_SMC0_IRQ,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct resource nettel_smc91x_1_resources[] = {
+	{
+		.start		= NETTEL_SMC1_ADDR,
+		.end		= NETTEL_SMC1_ADDR + 0x20,
+		.flags		= IORESOURCE_MEM,
+	},
+	{
+		.start		= NETTEL_SMC1_IRQ,
+		.end		= NETTEL_SMC1_IRQ,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device nettel_smc91x[] = {
+	{
+		.name			= "smc91x",
+		.id			= 0,
+		.num_resources		= ARRAY_SIZE(nettel_smc91x_0_resources),
+		.resource		= nettel_smc91x_0_resources,
+	},
+	{
+		.name			= "smc91x",
+		.id			= 1,
+		.num_resources		= ARRAY_SIZE(nettel_smc91x_1_resources),
+		.resource		= nettel_smc91x_1_resources,
+	},
+};
+
+static struct platform_device *nettel_devices[] __initdata = {
+	&nettel_smc91x[0],
+	&nettel_smc91x[1],
+};
+
+/***************************************************************************/
+
+static u8 nettel_macdefault[] __initdata = {
+	0x00, 0xd0, 0xcf, 0x00, 0x00, 0x01,
+};
+
+/*
+ * Set flash contained MAC address into SMC9196 core. Make sure the flash
+ * MAC address is sane, and not an empty flash. If no good use the Moreton
+ * Bay default MAC address instead.
+ */
+
+static void __init nettel_smc91x_setmac(unsigned int ioaddr, unsigned int flashaddr)
+{
+	u16 *macp;
+
+	macp = (u16 *) flashaddr;
+	if ((macp[0] == 0xffff) && (macp[1] == 0xffff) && (macp[2] == 0xffff))
+		macp = (u16 *) &nettel_macdefault[0];
+
+	writew(1, NETTEL_SMC0_ADDR + SMC91xx_BANKSELECT);
+	writew(macp[0], ioaddr + SMC91xx_BASEMAC);
+	writew(macp[1], ioaddr + SMC91xx_BASEMAC + 2);
+	writew(macp[2], ioaddr + SMC91xx_BASEMAC + 4);
+}
+
+/***************************************************************************/
+
+/*
+ * Re-map the address space of at least one of the SMC ethernet
+ * parts. Both parts power up decoding the same address, so we
+ * need to move one of them first, before doing anything else.
+ */
+
+static void __init nettel_smc91x_init(void)
+{
+	writew(0x00ec, MCFSIM_PADDR);
+	mcf_setppdata(0, 0x0080);
+	writew(1, NETTEL_SMC0_ADDR + SMC91xx_BANKSELECT);
+	writew(0x0067, NETTEL_SMC0_ADDR + SMC91xx_BASEADDR);
+	mcf_setppdata(0x0080, 0);
+
+	/* Set correct chip select timing for SMC9196 accesses */
+	writew(0x1180, MCFSIM_CSCR3);
+
+	/* Set the SMC interrupts to be auto-vectored */
+	mcf_autovector(NETTEL_SMC0_IRQ);
+	mcf_autovector(NETTEL_SMC1_IRQ);
+
+	/* Set MAC addresses from flash for both interfaces */
+	nettel_smc91x_setmac(NETTEL_SMC0_ADDR, 0xf0006000);
+	nettel_smc91x_setmac(NETTEL_SMC1_ADDR, 0xf0006006);
+}
+
+/***************************************************************************/
+
+static int __init init_nettel(void)
+{
+	nettel_smc91x_init();
+	platform_add_devices(nettel_devices, ARRAY_SIZE(nettel_devices));
+	return 0;
+}
+
+arch_initcall(init_nettel);
+
+/***************************************************************************/
diff --git a/arch/m68k/coldfire/pci.c b/arch/m68k/coldfire/pci.c
new file mode 100644
index 000000000..84eab0f5e
--- /dev/null
+++ b/arch/m68k/coldfire/pci.c
@@ -0,0 +1,259 @@
+/*
+ * pci.c -- PCI bus support for ColdFire processors
+ *
+ * (C) Copyright 2012, Greg Ungerer <gerg@uclinux.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file COPYING in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/types.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+#include <asm/m54xxpci.h>
+
+/*
+ * Memory and IO mappings. We use a 1:1 mapping for local host memory to
+ * PCI bus memory (no reason not to really). IO space is mapped in its own
+ * separate address region. The device configuration space is mapped over
+ * the IO map space when we enable it in the PCICAR register.
+ */
+static struct pci_bus *rootbus;
+static unsigned long iospace;
+
+/*
+ * We need to be carefull probing on bus 0 (directly connected to host
+ * bridge). We should only access the well defined possible devices in
+ * use, ignore aliases and the like.
+ */
+static unsigned char mcf_host_slot2sid[32] = {
+	0, 0, 0, 0, 0, 0, 0, 0,
+	0, 0, 0, 0, 0, 0, 0, 0,
+	0, 1, 2, 0, 3, 4, 0, 0,
+	0, 0, 0, 0, 0, 0, 0, 0,
+};
+
+static unsigned char mcf_host_irq[] = {
+	0, 69, 69, 71, 71,
+};
+
+/*
+ * Configuration space access functions. Configuration space access is
+ * through the IO mapping window, enabling it via the PCICAR register.
+ */
+static unsigned long mcf_mk_pcicar(int bus, unsigned int devfn, int where)
+{
+	return (bus << PCICAR_BUSN) | (devfn << PCICAR_DEVFNN) | (where & 0xfc);
+}
+
+static int mcf_pci_readconfig(struct pci_bus *bus, unsigned int devfn,
+	int where, int size, u32 *value)
+{
+	unsigned long addr;
+
+	*value = 0xffffffff;
+
+	if (bus->number == 0) {
+		if (mcf_host_slot2sid[PCI_SLOT(devfn)] == 0)
+			return PCIBIOS_SUCCESSFUL;
+	}
+
+	addr = mcf_mk_pcicar(bus->number, devfn, where);
+	__raw_writel(PCICAR_E | addr, PCICAR);
+	__raw_readl(PCICAR);
+	addr = iospace + (where & 0x3);
+
+	switch (size) {
+	case 1:
+		*value = __raw_readb(addr);
+		break;
+	case 2:
+		*value = le16_to_cpu(__raw_readw(addr));
+		break;
+	default:
+		*value = le32_to_cpu(__raw_readl(addr));
+		break;
+	}
+
+	__raw_writel(0, PCICAR);
+	__raw_readl(PCICAR);
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static int mcf_pci_writeconfig(struct pci_bus *bus, unsigned int devfn,
+	int where, int size, u32 value)
+{
+	unsigned long addr;
+
+	if (bus->number == 0) {
+		if (mcf_host_slot2sid[PCI_SLOT(devfn)] == 0)
+			return PCIBIOS_SUCCESSFUL;
+	}
+
+	addr = mcf_mk_pcicar(bus->number, devfn, where);
+	__raw_writel(PCICAR_E | addr, PCICAR);
+	__raw_readl(PCICAR);
+	addr = iospace + (where & 0x3);
+
+	switch (size) {
+	case 1:
+		 __raw_writeb(value, addr);
+		break;
+	case 2:
+		__raw_writew(cpu_to_le16(value), addr);
+		break;
+	default:
+		__raw_writel(cpu_to_le32(value), addr);
+		break;
+	}
+
+	__raw_writel(0, PCICAR);
+	__raw_readl(PCICAR);
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static struct pci_ops mcf_pci_ops = {
+	.read	= mcf_pci_readconfig,
+	.write	= mcf_pci_writeconfig,
+};
+
+/*
+ * Initialize the PCI bus registers, and scan the bus.
+ */
+static struct resource mcf_pci_mem = {
+	.name	= "PCI Memory space",
+	.start	= PCI_MEM_PA,
+	.end	= PCI_MEM_PA + PCI_MEM_SIZE - 1,
+	.flags	= IORESOURCE_MEM,
+};
+
+static struct resource mcf_pci_io = {
+	.name	= "PCI IO space",
+	.start	= 0x400,
+	.end	= 0x10000 - 1,
+	.flags	= IORESOURCE_IO,
+};
+
+static struct resource busn_resource = {
+	.name	= "PCI busn",
+	.start	= 0,
+	.end	= 255,
+	.flags	= IORESOURCE_BUS,
+};
+
+/*
+ * Interrupt mapping and setting.
+ */
+static int mcf_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+	int sid;
+
+	sid = mcf_host_slot2sid[slot];
+	if (sid)
+		return mcf_host_irq[sid];
+	return 0;
+}
+
+static int __init mcf_pci_init(void)
+{
+	struct pci_host_bridge *bridge;
+	int ret;
+
+	bridge = pci_alloc_host_bridge(0);
+	if (!bridge)
+		return -ENOMEM;
+
+	pr_info("ColdFire: PCI bus initialization...\n");
+
+	/* Reset the external PCI bus */
+	__raw_writel(PCIGSCR_RESET, PCIGSCR);
+	__raw_writel(0, PCITCR);
+
+	request_resource(&iomem_resource, &mcf_pci_mem);
+	request_resource(&iomem_resource, &mcf_pci_io);
+
+	/* Configure PCI arbiter */
+	__raw_writel(PACR_INTMPRI | PACR_INTMINTE | PACR_EXTMPRI(0x1f) |
+		PACR_EXTMINTE(0x1f), PACR);
+
+	/* Set required multi-function pins for PCI bus use */
+	__raw_writew(0x3ff, MCFGPIO_PAR_PCIBG);
+	__raw_writew(0x3ff, MCFGPIO_PAR_PCIBR);
+
+	/* Set up config space for local host bus controller */
+	__raw_writel(PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER |
+		PCI_COMMAND_INVALIDATE, PCISCR);
+	__raw_writel(PCICR1_LT(32) | PCICR1_CL(8), PCICR1);
+	__raw_writel(0, PCICR2);
+
+	/*
+	 * Set up the initiator windows for memory and IO mapping.
+	 * These give the CPU bus access onto the PCI bus. One for each of
+	 * PCI memory and IO address spaces.
+	 */
+	__raw_writel(WXBTAR(PCI_MEM_PA, PCI_MEM_BA, PCI_MEM_SIZE),
+		PCIIW0BTAR);
+	__raw_writel(WXBTAR(PCI_IO_PA, PCI_IO_BA, PCI_IO_SIZE),
+		PCIIW1BTAR);
+	__raw_writel(PCIIWCR_W0_MEM /*| PCIIWCR_W0_MRDL*/ | PCIIWCR_W0_E |
+		PCIIWCR_W1_IO | PCIIWCR_W1_E, PCIIWCR);
+
+	/*
+	 * Set up the target windows for access from the PCI bus back to the
+	 * CPU bus. All we need is access to system RAM (for mastering).
+	 */
+	__raw_writel(CONFIG_RAMBASE, PCIBAR1);
+	__raw_writel(CONFIG_RAMBASE | PCITBATR1_E, PCITBATR1);
+
+	/* Keep a virtual mapping to IO/config space active */
+	iospace = (unsigned long) ioremap(PCI_IO_PA, PCI_IO_SIZE);
+	if (iospace == 0) {
+		pci_free_host_bridge(bridge);
+		return -ENODEV;
+	}
+	pr_info("Coldfire: PCI IO/config window mapped to 0x%x\n",
+		(u32) iospace);
+
+	/* Turn of PCI reset, and wait for devices to settle */
+	__raw_writel(0, PCIGSCR);
+	set_current_state(TASK_UNINTERRUPTIBLE);
+	schedule_timeout(msecs_to_jiffies(200));
+
+
+	pci_add_resource(&bridge->windows, &ioport_resource);
+	pci_add_resource(&bridge->windows, &iomem_resource);
+	pci_add_resource(&bridge->windows, &busn_resource);
+	bridge->dev.parent = NULL;
+	bridge->sysdata = NULL;
+	bridge->busnr = 0;
+	bridge->ops = &mcf_pci_ops;
+	bridge->swizzle_irq = pci_common_swizzle;
+	bridge->map_irq = mcf_pci_map_irq;
+
+	ret = pci_scan_root_bus_bridge(bridge);
+	if (ret) {
+		pci_free_host_bridge(bridge);
+		return ret;
+	}
+
+	rootbus = bridge->bus;
+
+	rootbus->resource[0] = &mcf_pci_io;
+	rootbus->resource[1] = &mcf_pci_mem;
+
+	pci_bus_size_bridges(rootbus);
+	pci_bus_assign_resources(rootbus);
+	pci_bus_add_devices(rootbus);
+	return 0;
+}
+
+subsys_initcall(mcf_pci_init);
diff --git a/arch/m68k/coldfire/pit.c b/arch/m68k/coldfire/pit.c
new file mode 100644
index 000000000..eb6f16b0e
--- /dev/null
+++ b/arch/m68k/coldfire/pit.c
@@ -0,0 +1,164 @@
+// SPDX-License-Identifier: GPL-2.0
+/***************************************************************************/
+
+/*
+ *	pit.c -- Freescale ColdFire PIT timer. Currently this type of
+ *	         hardware timer only exists in the Freescale ColdFire
+ *		 5270/5271, 5282 and 5208 CPUs. No doubt newer ColdFire
+ *		 family members will probably use it too.
+ *
+ *	Copyright (C) 1999-2008, Greg Ungerer (gerg@snapgear.com)
+ *	Copyright (C) 2001-2004, SnapGear Inc. (www.snapgear.com)
+ */
+
+/***************************************************************************/
+
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/param.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/clockchips.h>
+#include <asm/machdep.h>
+#include <asm/io.h>
+#include <asm/coldfire.h>
+#include <asm/mcfpit.h>
+#include <asm/mcfsim.h>
+
+/***************************************************************************/
+
+/*
+ *	By default use timer1 as the system clock timer.
+ */
+#define	FREQ	((MCF_CLK / 2) / 64)
+#define	TA(a)	(MCFPIT_BASE1 + (a))
+#define PIT_CYCLES_PER_JIFFY (FREQ / HZ)
+
+static u32 pit_cnt;
+
+/*
+ * Initialize the PIT timer.
+ *
+ * This is also called after resume to bring the PIT into operation again.
+ */
+
+static int cf_pit_set_periodic(struct clock_event_device *evt)
+{
+	__raw_writew(MCFPIT_PCSR_DISABLE, TA(MCFPIT_PCSR));
+	__raw_writew(PIT_CYCLES_PER_JIFFY, TA(MCFPIT_PMR));
+	__raw_writew(MCFPIT_PCSR_EN | MCFPIT_PCSR_PIE |
+		     MCFPIT_PCSR_OVW | MCFPIT_PCSR_RLD |
+		     MCFPIT_PCSR_CLK64, TA(MCFPIT_PCSR));
+	return 0;
+}
+
+static int cf_pit_set_oneshot(struct clock_event_device *evt)
+{
+	__raw_writew(MCFPIT_PCSR_DISABLE, TA(MCFPIT_PCSR));
+	__raw_writew(MCFPIT_PCSR_EN | MCFPIT_PCSR_PIE |
+		     MCFPIT_PCSR_OVW | MCFPIT_PCSR_CLK64, TA(MCFPIT_PCSR));
+	return 0;
+}
+
+static int cf_pit_shutdown(struct clock_event_device *evt)
+{
+	__raw_writew(MCFPIT_PCSR_DISABLE, TA(MCFPIT_PCSR));
+	return 0;
+}
+
+/*
+ * Program the next event in oneshot mode
+ *
+ * Delta is given in PIT ticks
+ */
+static int cf_pit_next_event(unsigned long delta,
+		struct clock_event_device *evt)
+{
+	__raw_writew(delta, TA(MCFPIT_PMR));
+	return 0;
+}
+
+struct clock_event_device cf_pit_clockevent = {
+	.name			= "pit",
+	.features		= CLOCK_EVT_FEAT_PERIODIC |
+				  CLOCK_EVT_FEAT_ONESHOT,
+	.set_state_shutdown	= cf_pit_shutdown,
+	.set_state_periodic	= cf_pit_set_periodic,
+	.set_state_oneshot	= cf_pit_set_oneshot,
+	.set_next_event		= cf_pit_next_event,
+	.shift			= 32,
+	.irq			= MCF_IRQ_PIT1,
+};
+
+
+
+/***************************************************************************/
+
+static irqreturn_t pit_tick(int irq, void *dummy)
+{
+	struct clock_event_device *evt = &cf_pit_clockevent;
+	u16 pcsr;
+
+	/* Reset the ColdFire timer */
+	pcsr = __raw_readw(TA(MCFPIT_PCSR));
+	__raw_writew(pcsr | MCFPIT_PCSR_PIF, TA(MCFPIT_PCSR));
+
+	pit_cnt += PIT_CYCLES_PER_JIFFY;
+	evt->event_handler(evt);
+	return IRQ_HANDLED;
+}
+
+/***************************************************************************/
+
+static struct irqaction pit_irq = {
+	.name	 = "timer",
+	.flags	 = IRQF_TIMER,
+	.handler = pit_tick,
+};
+
+/***************************************************************************/
+
+static u64 pit_read_clk(struct clocksource *cs)
+{
+	unsigned long flags;
+	u32 cycles;
+	u16 pcntr;
+
+	local_irq_save(flags);
+	pcntr = __raw_readw(TA(MCFPIT_PCNTR));
+	cycles = pit_cnt;
+	local_irq_restore(flags);
+
+	return cycles + PIT_CYCLES_PER_JIFFY - pcntr;
+}
+
+/***************************************************************************/
+
+static struct clocksource pit_clk = {
+	.name	= "pit",
+	.rating	= 100,
+	.read	= pit_read_clk,
+	.mask	= CLOCKSOURCE_MASK(32),
+};
+
+/***************************************************************************/
+
+void hw_timer_init(irq_handler_t handler)
+{
+	cf_pit_clockevent.cpumask = cpumask_of(smp_processor_id());
+	cf_pit_clockevent.mult = div_sc(FREQ, NSEC_PER_SEC, 32);
+	cf_pit_clockevent.max_delta_ns =
+		clockevent_delta2ns(0xFFFF, &cf_pit_clockevent);
+	cf_pit_clockevent.max_delta_ticks = 0xFFFF;
+	cf_pit_clockevent.min_delta_ns =
+		clockevent_delta2ns(0x3f, &cf_pit_clockevent);
+	cf_pit_clockevent.min_delta_ticks = 0x3f;
+	clockevents_register_device(&cf_pit_clockevent);
+
+	setup_irq(MCF_IRQ_PIT1, &pit_irq);
+
+	clocksource_register_hz(&pit_clk, FREQ);
+}
+
+/***************************************************************************/
diff --git a/arch/m68k/coldfire/reset.c b/arch/m68k/coldfire/reset.c
new file mode 100644
index 000000000..f30952f0c
--- /dev/null
+++ b/arch/m68k/coldfire/reset.c
@@ -0,0 +1,50 @@
+/*
+ * reset.c  -- common ColdFire SoC reset support
+ *
+ * (C) Copyright 2012, Greg Ungerer <gerg@uclinux.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file COPYING in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <asm/machdep.h>
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+
+/*
+ *	There are 2 common methods amongst the ColdFure parts for reseting
+ *	the CPU. But there are couple of exceptions, the 5272 and the 547x
+ *	have something completely special to them, and we let their specific
+ *	subarch code handle them.
+ */
+
+#ifdef MCFSIM_SYPCR
+static void mcf_cpu_reset(void)
+{
+	local_irq_disable();
+	/* Set watchdog to soft reset, and enabled */
+	__raw_writeb(0xc0, MCFSIM_SYPCR);
+	for (;;)
+		/* wait for watchdog to timeout */;
+}
+#endif
+
+#ifdef MCF_RCR
+static void mcf_cpu_reset(void)
+{
+	local_irq_disable();
+	__raw_writeb(MCF_RCR_SWRESET, MCF_RCR);
+}
+#endif
+
+static int __init mcf_setup_reset(void)
+{
+	mach_reset = mcf_cpu_reset;
+	return 0;
+}
+
+arch_initcall(mcf_setup_reset);
diff --git a/arch/m68k/coldfire/sltimers.c b/arch/m68k/coldfire/sltimers.c
new file mode 100644
index 000000000..1b11e7bac
--- /dev/null
+++ b/arch/m68k/coldfire/sltimers.c
@@ -0,0 +1,150 @@
+// SPDX-License-Identifier: GPL-2.0
+/***************************************************************************/
+
+/*
+ *	sltimers.c -- generic ColdFire slice timer support.
+ *
+ *	Copyright (C) 2009-2010, Philippe De Muyter <phdm@macqel.be>
+ *	based on
+ *	timers.c -- generic ColdFire hardware timer support.
+ *	Copyright (C) 1999-2008, Greg Ungerer <gerg@snapgear.com>
+ */
+
+/***************************************************************************/
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/profile.h>
+#include <linux/clocksource.h>
+#include <asm/io.h>
+#include <asm/traps.h>
+#include <asm/machdep.h>
+#include <asm/coldfire.h>
+#include <asm/mcfslt.h>
+#include <asm/mcfsim.h>
+
+/***************************************************************************/
+
+#ifdef CONFIG_HIGHPROFILE
+
+/*
+ *	By default use Slice Timer 1 as the profiler clock timer.
+ */
+#define	PA(a)	(MCFSLT_TIMER1 + (a))
+
+/*
+ *	Choose a reasonably fast profile timer. Make it an odd value to
+ *	try and get good coverage of kernel operations.
+ */
+#define	PROFILEHZ	1013
+
+irqreturn_t mcfslt_profile_tick(int irq, void *dummy)
+{
+	/* Reset Slice Timer 1 */
+	__raw_writel(MCFSLT_SSR_BE | MCFSLT_SSR_TE, PA(MCFSLT_SSR));
+	if (current->pid)
+		profile_tick(CPU_PROFILING);
+	return IRQ_HANDLED;
+}
+
+static struct irqaction mcfslt_profile_irq = {
+	.name	 = "profile timer",
+	.flags	 = IRQF_TIMER,
+	.handler = mcfslt_profile_tick,
+};
+
+void mcfslt_profile_init(void)
+{
+	printk(KERN_INFO "PROFILE: lodging TIMER 1 @ %dHz as profile timer\n",
+	       PROFILEHZ);
+
+	setup_irq(MCF_IRQ_PROFILER, &mcfslt_profile_irq);
+
+	/* Set up TIMER 2 as high speed profile clock */
+	__raw_writel(MCF_BUSCLK / PROFILEHZ - 1, PA(MCFSLT_STCNT));
+	__raw_writel(MCFSLT_SCR_RUN | MCFSLT_SCR_IEN | MCFSLT_SCR_TEN,
+								PA(MCFSLT_SCR));
+
+}
+
+#endif	/* CONFIG_HIGHPROFILE */
+
+/***************************************************************************/
+
+/*
+ *	By default use Slice Timer 0 as the system clock timer.
+ */
+#define	TA(a)	(MCFSLT_TIMER0 + (a))
+
+static u32 mcfslt_cycles_per_jiffy;
+static u32 mcfslt_cnt;
+
+static irq_handler_t timer_interrupt;
+
+static irqreturn_t mcfslt_tick(int irq, void *dummy)
+{
+	/* Reset Slice Timer 0 */
+	__raw_writel(MCFSLT_SSR_BE | MCFSLT_SSR_TE, TA(MCFSLT_SSR));
+	mcfslt_cnt += mcfslt_cycles_per_jiffy;
+	return timer_interrupt(irq, dummy);
+}
+
+static struct irqaction mcfslt_timer_irq = {
+	.name	 = "timer",
+	.flags	 = IRQF_TIMER,
+	.handler = mcfslt_tick,
+};
+
+static u64 mcfslt_read_clk(struct clocksource *cs)
+{
+	unsigned long flags;
+	u32 cycles, scnt;
+
+	local_irq_save(flags);
+	scnt = __raw_readl(TA(MCFSLT_SCNT));
+	cycles = mcfslt_cnt;
+	if (__raw_readl(TA(MCFSLT_SSR)) & MCFSLT_SSR_TE) {
+		cycles += mcfslt_cycles_per_jiffy;
+		scnt = __raw_readl(TA(MCFSLT_SCNT));
+	}
+	local_irq_restore(flags);
+
+	/* subtract because slice timers count down */
+	return cycles + ((mcfslt_cycles_per_jiffy - 1) - scnt);
+}
+
+static struct clocksource mcfslt_clk = {
+	.name	= "slt",
+	.rating	= 250,
+	.read	= mcfslt_read_clk,
+	.mask	= CLOCKSOURCE_MASK(32),
+	.flags	= CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+void hw_timer_init(irq_handler_t handler)
+{
+	mcfslt_cycles_per_jiffy = MCF_BUSCLK / HZ;
+	/*
+	 *	The coldfire slice timer (SLT) runs from STCNT to 0 included,
+	 *	then STCNT again and so on.  It counts thus actually
+	 *	STCNT + 1 steps for 1 tick, not STCNT.  So if you want
+	 *	n cycles, initialize STCNT with n - 1.
+	 */
+	__raw_writel(mcfslt_cycles_per_jiffy - 1, TA(MCFSLT_STCNT));
+	__raw_writel(MCFSLT_SCR_RUN | MCFSLT_SCR_IEN | MCFSLT_SCR_TEN,
+								TA(MCFSLT_SCR));
+	/* initialize mcfslt_cnt knowing that slice timers count down */
+	mcfslt_cnt = mcfslt_cycles_per_jiffy;
+
+	timer_interrupt = handler;
+	setup_irq(MCF_IRQ_TIMER, &mcfslt_timer_irq);
+
+	clocksource_register_hz(&mcfslt_clk, MCF_BUSCLK);
+
+#ifdef CONFIG_HIGHPROFILE
+	mcfslt_profile_init();
+#endif
+}
diff --git a/arch/m68k/coldfire/stmark2.c b/arch/m68k/coldfire/stmark2.c
new file mode 100644
index 000000000..a8d2b3d17
--- /dev/null
+++ b/arch/m68k/coldfire/stmark2.c
@@ -0,0 +1,119 @@
+/*
+ * stmark2.c -- Support for Sysam AMCORE open board
+ *
+ * (C) Copyright 2017, Angelo Dureghello <angelo@sysam.it>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file COPYING in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/mtd/partitions.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/spi-fsl-dspi.h>
+#include <linux/spi/flash.h>
+#include <asm/mcfsim.h>
+
+/*
+ * Partitioning of parallel NOR flash (39VF3201B)
+ */
+static struct mtd_partition stmark2_partitions[] = {
+	{
+		.name = "U-Boot (1024K)",
+		.size = 0x100000,
+		.offset = 0x0
+	}, {
+		.name = "Kernel+initramfs (7168K)",
+		.size = 0x700000,
+		.offset = MTDPART_OFS_APPEND
+	}, {
+		.name = "Flash Free Space (8192K)",
+		.size = MTDPART_SIZ_FULL,
+		.offset = MTDPART_OFS_APPEND
+	}
+};
+
+static struct flash_platform_data stmark2_spi_flash_data = {
+	.name = "is25lp128",
+	.parts = stmark2_partitions,
+	.nr_parts = ARRAY_SIZE(stmark2_partitions),
+	.type = "is25lp128",
+};
+
+static struct spi_board_info stmark2_board_info[] __initdata = {
+	{
+		.modalias = "m25p80",
+		.max_speed_hz = 5000000,
+		.bus_num = 0,
+		.chip_select = 1,
+		.platform_data = &stmark2_spi_flash_data,
+		.mode = SPI_MODE_3,
+	}
+};
+
+/* SPI controller data, SPI (0) */
+static struct fsl_dspi_platform_data dspi_spi0_info = {
+	.cs_num = 4,
+	.bus_num = 0,
+	.sck_cs_delay = 100,
+	.cs_sck_delay = 100,
+};
+
+static struct resource dspi_spi0_resource[] = {
+	[0] = {
+		.start = MCFDSPI_BASE0,
+		.end   = MCFDSPI_BASE0 + 0xFF,
+		.flags = IORESOURCE_MEM,
+		},
+	[1] = {
+		.start = 12,
+		.end   = 13,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = MCF_IRQ_DSPI0,
+		.end   = MCF_IRQ_DSPI0,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+/* SPI controller, id = bus number */
+static struct platform_device dspi_spi0_device = {
+	.name = "fsl-dspi",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(dspi_spi0_resource),
+	.resource = dspi_spi0_resource,
+	.dev = {
+		.platform_data = &dspi_spi0_info,
+	},
+};
+
+static struct platform_device *stmark2_devices[] __initdata = {
+	&dspi_spi0_device,
+};
+
+/*
+ * Note: proper pin-mux setup is mandatory for proper SPI functionality.
+ */
+static int __init init_stmark2(void)
+{
+	/* DSPI0, all pins as DSPI, and using CS1 */
+	__raw_writeb(0x80, MCFGPIO_PAR_DSPIOWL);
+	__raw_writeb(0xfc, MCFGPIO_PAR_DSPIOWH);
+
+	/* Board gpio setup */
+	__raw_writeb(0x00, MCFGPIO_PAR_BE);
+	__raw_writeb(0x00, MCFGPIO_PAR_FBCTL);
+	__raw_writeb(0x00, MCFGPIO_PAR_CS);
+	__raw_writeb(0x00, MCFGPIO_PAR_CANI2C);
+
+	platform_add_devices(stmark2_devices, ARRAY_SIZE(stmark2_devices));
+
+	spi_register_board_info(stmark2_board_info,
+				ARRAY_SIZE(stmark2_board_info));
+
+	return 0;
+}
+
+late_initcall(init_stmark2);
diff --git a/arch/m68k/coldfire/timers.c b/arch/m68k/coldfire/timers.c
new file mode 100644
index 000000000..227aa5d13
--- /dev/null
+++ b/arch/m68k/coldfire/timers.c
@@ -0,0 +1,196 @@
+// SPDX-License-Identifier: GPL-2.0
+/***************************************************************************/
+
+/*
+ *	timers.c -- generic ColdFire hardware timer support.
+ *
+ *	Copyright (C) 1999-2008, Greg Ungerer <gerg@snapgear.com>
+ */
+
+/***************************************************************************/
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/profile.h>
+#include <linux/clocksource.h>
+#include <asm/io.h>
+#include <asm/traps.h>
+#include <asm/machdep.h>
+#include <asm/coldfire.h>
+#include <asm/mcftimer.h>
+#include <asm/mcfsim.h>
+
+/***************************************************************************/
+
+/*
+ *	By default use timer1 as the system clock timer.
+ */
+#define	FREQ	(MCF_BUSCLK / 16)
+#define	TA(a)	(MCFTIMER_BASE1 + (a))
+
+/*
+ *	These provide the underlying interrupt vector support.
+ *	Unfortunately it is a little different on each ColdFire.
+ */
+void coldfire_profile_init(void);
+
+#if defined(CONFIG_M53xx) || defined(CONFIG_M5441x)
+#define	__raw_readtrr	__raw_readl
+#define	__raw_writetrr	__raw_writel
+#else
+#define	__raw_readtrr	__raw_readw
+#define	__raw_writetrr	__raw_writew
+#endif
+
+static u32 mcftmr_cycles_per_jiffy;
+static u32 mcftmr_cnt;
+
+static irq_handler_t timer_interrupt;
+
+/***************************************************************************/
+
+static void init_timer_irq(void)
+{
+#ifdef MCFSIM_ICR_AUTOVEC
+	/* Timer1 is always used as system timer */
+	writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI3,
+		MCFSIM_TIMER1ICR);
+	mcf_mapirq2imr(MCF_IRQ_TIMER, MCFINTC_TIMER1);
+
+#ifdef CONFIG_HIGHPROFILE
+	/* Timer2 is to be used as a high speed profile timer  */
+	writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL7 | MCFSIM_ICR_PRI3,
+		MCFSIM_TIMER2ICR);
+	mcf_mapirq2imr(MCF_IRQ_PROFILER, MCFINTC_TIMER2);
+#endif
+#endif /* MCFSIM_ICR_AUTOVEC */
+}
+
+/***************************************************************************/
+
+static irqreturn_t mcftmr_tick(int irq, void *dummy)
+{
+	/* Reset the ColdFire timer */
+	__raw_writeb(MCFTIMER_TER_CAP | MCFTIMER_TER_REF, TA(MCFTIMER_TER));
+
+	mcftmr_cnt += mcftmr_cycles_per_jiffy;
+	return timer_interrupt(irq, dummy);
+}
+
+/***************************************************************************/
+
+static struct irqaction mcftmr_timer_irq = {
+	.name	 = "timer",
+	.flags	 = IRQF_TIMER,
+	.handler = mcftmr_tick,
+};
+
+/***************************************************************************/
+
+static u64 mcftmr_read_clk(struct clocksource *cs)
+{
+	unsigned long flags;
+	u32 cycles;
+	u16 tcn;
+
+	local_irq_save(flags);
+	tcn = __raw_readw(TA(MCFTIMER_TCN));
+	cycles = mcftmr_cnt;
+	local_irq_restore(flags);
+
+	return cycles + tcn;
+}
+
+/***************************************************************************/
+
+static struct clocksource mcftmr_clk = {
+	.name	= "tmr",
+	.rating	= 250,
+	.read	= mcftmr_read_clk,
+	.mask	= CLOCKSOURCE_MASK(32),
+	.flags	= CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+/***************************************************************************/
+
+void hw_timer_init(irq_handler_t handler)
+{
+	__raw_writew(MCFTIMER_TMR_DISABLE, TA(MCFTIMER_TMR));
+	mcftmr_cycles_per_jiffy = FREQ / HZ;
+	/*
+	 *	The coldfire timer runs from 0 to TRR included, then 0
+	 *	again and so on.  It counts thus actually TRR + 1 steps
+	 *	for 1 tick, not TRR.  So if you want n cycles,
+	 *	initialize TRR with n - 1.
+	 */
+	__raw_writetrr(mcftmr_cycles_per_jiffy - 1, TA(MCFTIMER_TRR));
+	__raw_writew(MCFTIMER_TMR_ENORI | MCFTIMER_TMR_CLK16 |
+		MCFTIMER_TMR_RESTART | MCFTIMER_TMR_ENABLE, TA(MCFTIMER_TMR));
+
+	clocksource_register_hz(&mcftmr_clk, FREQ);
+
+	timer_interrupt = handler;
+	init_timer_irq();
+	setup_irq(MCF_IRQ_TIMER, &mcftmr_timer_irq);
+
+#ifdef CONFIG_HIGHPROFILE
+	coldfire_profile_init();
+#endif
+}
+
+/***************************************************************************/
+#ifdef CONFIG_HIGHPROFILE
+/***************************************************************************/
+
+/*
+ *	By default use timer2 as the profiler clock timer.
+ */
+#define	PA(a)	(MCFTIMER_BASE2 + (a))
+
+/*
+ *	Choose a reasonably fast profile timer. Make it an odd value to
+ *	try and get good coverage of kernel operations.
+ */
+#define	PROFILEHZ	1013
+
+/*
+ *	Use the other timer to provide high accuracy profiling info.
+ */
+irqreturn_t coldfire_profile_tick(int irq, void *dummy)
+{
+	/* Reset ColdFire timer2 */
+	__raw_writeb(MCFTIMER_TER_CAP | MCFTIMER_TER_REF, PA(MCFTIMER_TER));
+	if (current->pid)
+		profile_tick(CPU_PROFILING);
+	return IRQ_HANDLED;
+}
+
+/***************************************************************************/
+
+static struct irqaction coldfire_profile_irq = {
+	.name	 = "profile timer",
+	.flags	 = IRQF_TIMER,
+	.handler = coldfire_profile_tick,
+};
+
+void coldfire_profile_init(void)
+{
+	printk(KERN_INFO "PROFILE: lodging TIMER2 @ %dHz as profile timer\n",
+	       PROFILEHZ);
+
+	/* Set up TIMER 2 as high speed profile clock */
+	__raw_writew(MCFTIMER_TMR_DISABLE, PA(MCFTIMER_TMR));
+
+	__raw_writetrr(((MCF_BUSCLK / 16) / PROFILEHZ), PA(MCFTIMER_TRR));
+	__raw_writew(MCFTIMER_TMR_ENORI | MCFTIMER_TMR_CLK16 |
+		MCFTIMER_TMR_RESTART | MCFTIMER_TMR_ENABLE, PA(MCFTIMER_TMR));
+
+	setup_irq(MCF_IRQ_PROFILER, &coldfire_profile_irq);
+}
+
+/***************************************************************************/
+#endif	/* CONFIG_HIGHPROFILE */
+/***************************************************************************/
diff --git a/arch/m68k/coldfire/vectors.c b/arch/m68k/coldfire/vectors.c
new file mode 100644
index 000000000..3bf0d69ee
--- /dev/null
+++ b/arch/m68k/coldfire/vectors.c
@@ -0,0 +1,71 @@
+// SPDX-License-Identifier: GPL-2.0
+/***************************************************************************/
+
+/*
+ *	vectors.c  -- high level trap setup for ColdFire
+ *
+ *	Copyright (C) 1999-2007, Greg Ungerer <gerg@snapgear.com>
+ */
+
+/***************************************************************************/
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <asm/traps.h>
+#include <asm/machdep.h>
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+#include <asm/mcfwdebug.h>
+
+/***************************************************************************/
+
+#ifdef TRAP_DBG_INTERRUPT
+
+asmlinkage void dbginterrupt_c(struct frame *fp)
+{
+	extern void dump(struct pt_regs *fp);
+	printk(KERN_DEBUG "%s(%d): BUS ERROR TRAP\n", __FILE__, __LINE__);
+	dump((struct pt_regs *) fp);
+	asm("halt");
+}
+
+#endif
+
+/***************************************************************************/
+
+/* Assembler routines */
+asmlinkage void buserr(void);
+asmlinkage void trap(void);
+asmlinkage void system_call(void);
+asmlinkage void inthandler(void);
+
+void __init trap_init(void)
+{
+	int i;
+
+	/*
+	 *	There is a common trap handler and common interrupt
+	 *	handler that handle almost every vector. We treat
+	 *	the system call and bus error special, they get their
+	 *	own first level handlers.
+	 */
+	for (i = 3; (i <= 23); i++)
+		_ramvec[i] = trap;
+	for (i = 33; (i <= 63); i++)
+		_ramvec[i] = trap;
+	for (i = 24; (i <= 31); i++)
+		_ramvec[i] = inthandler;
+	for (i = 64; (i < 255); i++)
+		_ramvec[i] = inthandler;
+	_ramvec[255] = 0;
+
+	_ramvec[2] = buserr;
+	_ramvec[32] = system_call;
+
+#ifdef TRAP_DBG_INTERRUPT
+	_ramvec[12] = dbginterrupt;
+#endif
+}
+
+/***************************************************************************/