Adding upstream version 4.19.249.upstream/4.19.249upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 932 insertions, 0 deletions

diff --git a/arch/m68k/ifpsp060/src/ilsp.S b/arch/m68k/ifpsp060/src/ilsp.S
new file mode 100644
index 000000000..dd5b2c357
--- /dev/null
+++ b/arch/m68k/ifpsp060/src/ilsp.S
@@ -0,0 +1,932 @@
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+MOTOROLA MICROPROCESSOR & MEMORY TECHNOLOGY GROUP
+M68000 Hi-Performance Microprocessor Division
+M68060 Software Package
+Production Release P1.00 -- October 10, 1994
+
+M68060 Software Package Copyright © 1993, 1994 Motorola Inc.  All rights reserved.
+
+THE SOFTWARE is provided on an "AS IS" basis and without warranty.
+To the maximum extent permitted by applicable law,
+MOTOROLA DISCLAIMS ALL WARRANTIES WHETHER EXPRESS OR IMPLIED,
+INCLUDING IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
+and any warranty against infringement with regard to the SOFTWARE
+(INCLUDING ANY MODIFIED VERSIONS THEREOF) and any accompanying written materials.
+
+To the maximum extent permitted by applicable law,
+IN NO EVENT SHALL MOTOROLA BE LIABLE FOR ANY DAMAGES WHATSOEVER
+(INCLUDING WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS PROFITS,
+BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION, OR OTHER PECUNIARY LOSS)
+ARISING OF THE USE OR INABILITY TO USE THE SOFTWARE.
+Motorola assumes no responsibility for the maintenance and support of the SOFTWARE.
+
+You are hereby granted a copyright license to use, modify, and distribute the SOFTWARE
+so long as this entire notice is retained without alteration in any modified and/or
+redistributed versions, and that such modified versions are clearly identified as such.
+No licenses are granted by implication, estoppel or otherwise under any patents
+or trademarks of Motorola, Inc.
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+# litop.s:
+#	This file is appended to the top of the 060FPLSP package
+# and contains the entry points into the package. The user, in
+# effect, branches to one of the branch table entries located here.
+#
+
+	bra.l	_060LSP__idivs64_
+	short	0x0000
+	bra.l	_060LSP__idivu64_
+	short	0x0000
+
+	bra.l	_060LSP__imuls64_
+	short	0x0000
+	bra.l	_060LSP__imulu64_
+	short	0x0000
+
+	bra.l	_060LSP__cmp2_Ab_
+	short	0x0000
+	bra.l	_060LSP__cmp2_Aw_
+	short	0x0000
+	bra.l	_060LSP__cmp2_Al_
+	short	0x0000
+	bra.l	_060LSP__cmp2_Db_
+	short	0x0000
+	bra.l	_060LSP__cmp2_Dw_
+	short	0x0000
+	bra.l	_060LSP__cmp2_Dl_
+	short	0x0000
+
+# leave room for future possible aditions.
+	align	0x200
+
+#########################################################################
+# XDEF ****************************************************************	#
+#	_060LSP__idivu64_(): Emulate 64-bit unsigned div instruction.	#
+#	_060LSP__idivs64_(): Emulate 64-bit signed div instruction.	#
+#									#
+#	This is the library version which is accessed as a subroutine	#
+#	and therefore does not work exactly like the 680X0 div{s,u}.l	#
+#	64-bit divide instruction.					#
+#									#
+# XREF ****************************************************************	#
+#	None.								#
+#									#
+# INPUT ***************************************************************	#
+#	0x4(sp)  = divisor						#
+#	0x8(sp)  = hi(dividend)						#
+#	0xc(sp)  = lo(dividend)						#
+#	0x10(sp) = pointer to location to place quotient/remainder	#
+#									#
+# OUTPUT **************************************************************	#
+#	0x10(sp) = points to location of remainder/quotient.		#
+#		   remainder is in first longword, quotient is in 2nd.	#
+#									#
+# ALGORITHM ***********************************************************	#
+#	If the operands are signed, make them unsigned and save the	#
+# sign info for later. Separate out special cases like divide-by-zero	#
+# or 32-bit divides if possible. Else, use a special math algorithm	#
+# to calculate the result.						#
+#	Restore sign info if signed instruction. Set the condition	#
+# codes before performing the final "rts". If the divisor was equal to	#
+# zero, then perform a divide-by-zero using a 16-bit implemented	#
+# divide instruction. This way, the operating system can record that	#
+# the event occurred even though it may not point to the correct place.	#
+#									#
+#########################################################################
+
+set	POSNEG,		-1
+set	NDIVISOR,	-2
+set	NDIVIDEND,	-3
+set	DDSECOND,	-4
+set	DDNORMAL,	-8
+set	DDQUOTIENT,	-12
+set	DIV64_CC,	-16
+
+##########
+# divs.l #
+##########
+	global		_060LSP__idivs64_
+_060LSP__idivs64_:
+# PROLOGUE BEGIN ########################################################
+	link.w		%a6,&-16
+	movm.l		&0x3f00,-(%sp)		# save d2-d7
+#	fmovm.l		&0x0,-(%sp)		# save no fpregs
+# PROLOGUE END ##########################################################
+
+	mov.w		%cc,DIV64_CC(%a6)
+	st		POSNEG(%a6)		# signed operation
+	bra.b		ldiv64_cont
+
+##########
+# divu.l #
+##########
+	global		_060LSP__idivu64_
+_060LSP__idivu64_:
+# PROLOGUE BEGIN ########################################################
+	link.w		%a6,&-16
+	movm.l		&0x3f00,-(%sp)		# save d2-d7
+#	fmovm.l		&0x0,-(%sp)		# save no fpregs
+# PROLOGUE END ##########################################################
+
+	mov.w		%cc,DIV64_CC(%a6)
+	sf		POSNEG(%a6)		# unsigned operation
+
+ldiv64_cont:
+	mov.l		0x8(%a6),%d7		# fetch divisor
+
+	beq.w		ldiv64eq0		# divisor is = 0!!!
+
+	mov.l		0xc(%a6), %d5		# get dividend hi
+	mov.l		0x10(%a6), %d6		# get dividend lo
+
+# separate signed and unsigned divide
+	tst.b		POSNEG(%a6)		# signed or unsigned?
+	beq.b		ldspecialcases		# use positive divide
+
+# save the sign of the divisor
+# make divisor unsigned if it's negative
+	tst.l		%d7			# chk sign of divisor
+	slt		NDIVISOR(%a6)		# save sign of divisor
+	bpl.b		ldsgndividend
+	neg.l		%d7			# complement negative divisor
+
+# save the sign of the dividend
+# make dividend unsigned if it's negative
+ldsgndividend:
+	tst.l		%d5			# chk sign of hi(dividend)
+	slt		NDIVIDEND(%a6)		# save sign of dividend
+	bpl.b		ldspecialcases
+
+	mov.w		&0x0, %cc		# clear 'X' cc bit
+	negx.l		%d6			# complement signed dividend
+	negx.l		%d5
+
+# extract some special cases:
+#	- is (dividend == 0) ?
+#	- is (hi(dividend) == 0 && (divisor <= lo(dividend))) ? (32-bit div)
+ldspecialcases:
+	tst.l		%d5			# is (hi(dividend) == 0)
+	bne.b		ldnormaldivide		# no, so try it the long way
+
+	tst.l		%d6			# is (lo(dividend) == 0), too
+	beq.w		lddone			# yes, so (dividend == 0)
+
+	cmp.l		%d7,%d6			# is (divisor <= lo(dividend))
+	bls.b		ld32bitdivide		# yes, so use 32 bit divide
+
+	exg		%d5,%d6			# q = 0, r = dividend
+	bra.w		ldivfinish		# can't divide, we're done.
+
+ld32bitdivide:
+	tdivu.l		%d7, %d5:%d6		# it's only a 32/32 bit div!
+
+	bra.b		ldivfinish
+
+ldnormaldivide:
+# last special case:
+#	- is hi(dividend) >= divisor ? if yes, then overflow
+	cmp.l		%d7,%d5
+	bls.b		lddovf			# answer won't fit in 32 bits
+
+# perform the divide algorithm:
+	bsr.l		ldclassical		# do int divide
+
+# separate into signed and unsigned finishes.
+ldivfinish:
+	tst.b		POSNEG(%a6)		# do divs, divu separately
+	beq.b		lddone			# divu has no processing!!!
+
+# it was a divs.l, so ccode setting is a little more complicated...
+	tst.b		NDIVIDEND(%a6)		# remainder has same sign
+	beq.b		ldcc			# as dividend.
+	neg.l		%d5			# sgn(rem) = sgn(dividend)
+ldcc:
+	mov.b		NDIVISOR(%a6), %d0
+	eor.b		%d0, NDIVIDEND(%a6)	# chk if quotient is negative
+	beq.b		ldqpos			# branch to quot positive
+
+# 0x80000000 is the largest number representable as a 32-bit negative
+# number. the negative of 0x80000000 is 0x80000000.
+	cmpi.l		%d6, &0x80000000	# will (-quot) fit in 32 bits?
+	bhi.b		lddovf
+
+	neg.l		%d6			# make (-quot) 2's comp
+
+	bra.b		lddone
+
+ldqpos:
+	btst		&0x1f, %d6		# will (+quot) fit in 32 bits?
+	bne.b		lddovf
+
+lddone:
+# if the register numbers are the same, only the quotient gets saved.
+# so, if we always save the quotient second, we save ourselves a cmp&beq
+	andi.w		&0x10,DIV64_CC(%a6)
+	mov.w		DIV64_CC(%a6),%cc
+	tst.l		%d6			# may set 'N' ccode bit
+
+# here, the result is in d1 and d0. the current strategy is to save
+# the values at the location pointed to by a0.
+# use movm here to not disturb the condition codes.
+ldexit:
+	movm.l		&0x0060,([0x14,%a6])	# save result
+
+# EPILOGUE BEGIN ########################################################
+#	fmovm.l		(%sp)+,&0x0		# restore no fpregs
+	movm.l		(%sp)+,&0x00fc		# restore d2-d7
+	unlk		%a6
+# EPILOGUE END ##########################################################
+
+	rts
+
+# the result should be the unchanged dividend
+lddovf:
+	mov.l		0xc(%a6), %d5		# get dividend hi
+	mov.l		0x10(%a6), %d6		# get dividend lo
+
+	andi.w		&0x1c,DIV64_CC(%a6)
+	ori.w		&0x02,DIV64_CC(%a6)	# set 'V' ccode bit
+	mov.w		DIV64_CC(%a6),%cc
+
+	bra.b		ldexit
+
+ldiv64eq0:
+	mov.l		0xc(%a6),([0x14,%a6])
+	mov.l		0x10(%a6),([0x14,%a6],0x4)
+
+	mov.w		DIV64_CC(%a6),%cc
+
+# EPILOGUE BEGIN ########################################################
+#	fmovm.l		(%sp)+,&0x0		# restore no fpregs
+	movm.l		(%sp)+,&0x00fc		# restore d2-d7
+	unlk		%a6
+# EPILOGUE END ##########################################################
+
+	divu.w		&0x0,%d0		# force a divbyzero exception
+	rts
+
+###########################################################################
+#########################################################################
+# This routine uses the 'classical' Algorithm D from Donald Knuth's	#
+# Art of Computer Programming, vol II, Seminumerical Algorithms.	#
+# For this implementation b=2**16, and the target is U1U2U3U4/V1V2,	#
+# where U,V are words of the quadword dividend and longword divisor,	#
+# and U1, V1 are the most significant words.				#
+#									#
+# The most sig. longword of the 64 bit dividend must be in %d5, least	#
+# in %d6. The divisor must be in the variable ddivisor, and the		#
+# signed/unsigned flag ddusign must be set (0=unsigned,1=signed).	#
+# The quotient is returned in %d6, remainder in %d5, unless the		#
+# v (overflow) bit is set in the saved %ccr. If overflow, the dividend	#
+# is unchanged.								#
+#########################################################################
+ldclassical:
+# if the divisor msw is 0, use simpler algorithm then the full blown
+# one at ddknuth:
+
+	cmpi.l		%d7, &0xffff
+	bhi.b		lddknuth		# go use D. Knuth algorithm
+
+# Since the divisor is only a word (and larger than the mslw of the dividend),
+# a simpler algorithm may be used :
+# In the general case, four quotient words would be created by
+# dividing the divisor word into each dividend word. In this case,
+# the first two quotient words must be zero, or overflow would occur.
+# Since we already checked this case above, we can treat the most significant
+# longword of the dividend as (0) remainder (see Knuth) and merely complete
+# the last two divisions to get a quotient longword and word remainder:
+
+	clr.l		%d1
+	swap		%d5			# same as r*b if previous step rqd
+	swap		%d6			# get u3 to lsw position
+	mov.w		%d6, %d5		# rb + u3
+
+	divu.w		%d7, %d5
+
+	mov.w		%d5, %d1		# first quotient word
+	swap		%d6			# get u4
+	mov.w		%d6, %d5		# rb + u4
+
+	divu.w		%d7, %d5
+
+	swap		%d1
+	mov.w		%d5, %d1		# 2nd quotient 'digit'
+	clr.w		%d5
+	swap		%d5			# now remainder
+	mov.l		%d1, %d6		# and quotient
+
+	rts
+
+lddknuth:
+# In this algorithm, the divisor is treated as a 2 digit (word) number
+# which is divided into a 3 digit (word) dividend to get one quotient
+# digit (word). After subtraction, the dividend is shifted and the
+# process repeated. Before beginning, the divisor and quotient are
+# 'normalized' so that the process of estimating the quotient digit
+# will yield verifiably correct results..
+
+	clr.l		DDNORMAL(%a6)		# count of shifts for normalization
+	clr.b		DDSECOND(%a6)		# clear flag for quotient digits
+	clr.l		%d1			# %d1 will hold trial quotient
+lddnchk:
+	btst		&31, %d7		# must we normalize? first word of
+	bne.b		lddnormalized		# divisor (V1) must be >= 65536/2
+	addq.l		&0x1, DDNORMAL(%a6)	# count normalization shifts
+	lsl.l		&0x1, %d7		# shift the divisor
+	lsl.l		&0x1, %d6		# shift u4,u3 with overflow to u2
+	roxl.l		&0x1, %d5		# shift u1,u2
+	bra.w		lddnchk
+lddnormalized:
+
+# Now calculate an estimate of the quotient words (msw first, then lsw).
+# The comments use subscripts for the first quotient digit determination.
+	mov.l		%d7, %d3		# divisor
+	mov.l		%d5, %d2		# dividend mslw
+	swap		%d2
+	swap		%d3
+	cmp.w		%d2, %d3		# V1 = U1 ?
+	bne.b		lddqcalc1
+	mov.w		&0xffff, %d1		# use max trial quotient word
+	bra.b		lddadj0
+lddqcalc1:
+	mov.l		%d5, %d1
+
+	divu.w		%d3, %d1		# use quotient of mslw/msw
+
+	andi.l		&0x0000ffff, %d1	# zero any remainder
+lddadj0:
+
+# now test the trial quotient and adjust. This step plus the
+# normalization assures (according to Knuth) that the trial
+# quotient will be at worst 1 too large.
+	mov.l		%d6, -(%sp)
+	clr.w		%d6			# word u3 left
+	swap		%d6			# in lsw position
+lddadj1: mov.l		%d7, %d3
+	mov.l		%d1, %d2
+	mulu.w		%d7, %d2		# V2q
+	swap		%d3
+	mulu.w		%d1, %d3		# V1q
+	mov.l		%d5, %d4		# U1U2
+	sub.l		%d3, %d4		# U1U2 - V1q
+
+	swap		%d4
+
+	mov.w		%d4,%d0
+	mov.w		%d6,%d4			# insert lower word (U3)
+
+	tst.w		%d0			# is upper word set?
+	bne.w		lddadjd1
+
+#	add.l		%d6, %d4		# (U1U2 - V1q) + U3
+
+	cmp.l		%d2, %d4
+	bls.b		lddadjd1		# is V2q > (U1U2-V1q) + U3 ?
+	subq.l		&0x1, %d1		# yes, decrement and recheck
+	bra.b		lddadj1
+lddadjd1:
+# now test the word by multiplying it by the divisor (V1V2) and comparing
+# the 3 digit (word) result with the current dividend words
+	mov.l		%d5, -(%sp)		# save %d5 (%d6 already saved)
+	mov.l		%d1, %d6
+	swap		%d6			# shift answer to ms 3 words
+	mov.l		%d7, %d5
+	bsr.l		ldmm2
+	mov.l		%d5, %d2		# now %d2,%d3 are trial*divisor
+	mov.l		%d6, %d3
+	mov.l		(%sp)+, %d5		# restore dividend
+	mov.l		(%sp)+, %d6
+	sub.l		%d3, %d6
+	subx.l		%d2, %d5		# subtract double precision
+	bcc		ldd2nd			# no carry, do next quotient digit
+	subq.l		&0x1, %d1		# q is one too large
+# need to add back divisor longword to current ms 3 digits of dividend
+# - according to Knuth, this is done only 2 out of 65536 times for random
+# divisor, dividend selection.
+	clr.l		%d2
+	mov.l		%d7, %d3
+	swap		%d3
+	clr.w		%d3			# %d3 now ls word of divisor
+	add.l		%d3, %d6		# aligned with 3rd word of dividend
+	addx.l		%d2, %d5
+	mov.l		%d7, %d3
+	clr.w		%d3			# %d3 now ms word of divisor
+	swap		%d3			# aligned with 2nd word of dividend
+	add.l		%d3, %d5
+ldd2nd:
+	tst.b		DDSECOND(%a6)	# both q words done?
+	bne.b		lddremain
+# first quotient digit now correct. store digit and shift the
+# (subtracted) dividend
+	mov.w		%d1, DDQUOTIENT(%a6)
+	clr.l		%d1
+	swap		%d5
+	swap		%d6
+	mov.w		%d6, %d5
+	clr.w		%d6
+	st		DDSECOND(%a6)		# second digit
+	bra.w		lddnormalized
+lddremain:
+# add 2nd word to quotient, get the remainder.
+	mov.w		%d1, DDQUOTIENT+2(%a6)
+# shift down one word/digit to renormalize remainder.
+	mov.w		%d5, %d6
+	swap		%d6
+	swap		%d5
+	mov.l		DDNORMAL(%a6), %d7	# get norm shift count
+	beq.b		lddrn
+	subq.l		&0x1, %d7		# set for loop count
+lddnlp:
+	lsr.l		&0x1, %d5		# shift into %d6
+	roxr.l		&0x1, %d6
+	dbf		%d7, lddnlp
+lddrn:
+	mov.l		%d6, %d5		# remainder
+	mov.l		DDQUOTIENT(%a6), %d6	# quotient
+
+	rts
+ldmm2:
+# factors for the 32X32->64 multiplication are in %d5 and %d6.
+# returns 64 bit result in %d5 (hi) %d6(lo).
+# destroys %d2,%d3,%d4.
+
+# multiply hi,lo words of each factor to get 4 intermediate products
+	mov.l		%d6, %d2
+	mov.l		%d6, %d3
+	mov.l		%d5, %d4
+	swap		%d3
+	swap		%d4
+	mulu.w		%d5, %d6		# %d6 <- lsw*lsw
+	mulu.w		%d3, %d5		# %d5 <- msw-dest*lsw-source
+	mulu.w		%d4, %d2		# %d2 <- msw-source*lsw-dest
+	mulu.w		%d4, %d3		# %d3 <- msw*msw
+# now use swap and addx to consolidate to two longwords
+	clr.l		%d4
+	swap		%d6
+	add.w		%d5, %d6		# add msw of l*l to lsw of m*l product
+	addx.w		%d4, %d3		# add any carry to m*m product
+	add.w		%d2, %d6		# add in lsw of other m*l product
+	addx.w		%d4, %d3		# add any carry to m*m product
+	swap		%d6			# %d6 is low 32 bits of final product
+	clr.w		%d5
+	clr.w		%d2			# lsw of two mixed products used,
+	swap		%d5			# now use msws of longwords
+	swap		%d2
+	add.l		%d2, %d5
+	add.l		%d3, %d5	# %d5 now ms 32 bits of final product
+	rts
+
+#########################################################################
+# XDEF ****************************************************************	#
+#	_060LSP__imulu64_(): Emulate 64-bit unsigned mul instruction	#
+#	_060LSP__imuls64_(): Emulate 64-bit signed mul instruction.	#
+#									#
+#	This is the library version which is accessed as a subroutine	#
+#	and therefore does not work exactly like the 680X0 mul{s,u}.l	#
+#	64-bit multiply instruction.					#
+#									#
+# XREF ****************************************************************	#
+#	None								#
+#									#
+# INPUT ***************************************************************	#
+#	0x4(sp) = multiplier						#
+#	0x8(sp) = multiplicand						#
+#	0xc(sp) = pointer to location to place 64-bit result		#
+#									#
+# OUTPUT **************************************************************	#
+#	0xc(sp) = points to location of 64-bit result			#
+#									#
+# ALGORITHM ***********************************************************	#
+#	Perform the multiply in pieces using 16x16->32 unsigned		#
+# multiplies and "add" instructions.					#
+#	Set the condition codes as appropriate before performing an	#
+# "rts".								#
+#									#
+#########################################################################
+
+set MUL64_CC, -4
+
+	global		_060LSP__imulu64_
+_060LSP__imulu64_:
+
+# PROLOGUE BEGIN ########################################################
+	link.w		%a6,&-4
+	movm.l		&0x3800,-(%sp)		# save d2-d4
+#	fmovm.l		&0x0,-(%sp)		# save no fpregs
+# PROLOGUE END ##########################################################
+
+	mov.w		%cc,MUL64_CC(%a6)	# save incoming ccodes
+
+	mov.l		0x8(%a6),%d0		# store multiplier in d0
+	beq.w		mulu64_zero		# handle zero separately
+
+	mov.l		0xc(%a6),%d1		# get multiplicand in d1
+	beq.w		mulu64_zero		# handle zero separately
+
+#########################################################################
+#	63			   32				0	#
+#	----------------------------					#
+#	| hi(mplier) * hi(mplicand)|					#
+#	----------------------------					#
+#		     -----------------------------			#
+#		     | hi(mplier) * lo(mplicand) |			#
+#		     -----------------------------			#
+#		     -----------------------------			#
+#		     | lo(mplier) * hi(mplicand) |			#
+#		     -----------------------------			#
+#	  |			   -----------------------------	#
+#	--|--			   | lo(mplier) * lo(mplicand) |	#
+#	  |			   -----------------------------	#
+#	========================================================	#
+#	--------------------------------------------------------	#
+#	|	hi(result)	   |	    lo(result)         |	#
+#	--------------------------------------------------------	#
+#########################################################################
+mulu64_alg:
+# load temp registers with operands
+	mov.l		%d0,%d2			# mr in d2
+	mov.l		%d0,%d3			# mr in d3
+	mov.l		%d1,%d4			# md in d4
+	swap		%d3			# hi(mr) in lo d3
+	swap		%d4			# hi(md) in lo d4
+
+# complete necessary multiplies:
+	mulu.w		%d1,%d0			# [1] lo(mr) * lo(md)
+	mulu.w		%d3,%d1			# [2] hi(mr) * lo(md)
+	mulu.w		%d4,%d2			# [3] lo(mr) * hi(md)
+	mulu.w		%d4,%d3			# [4] hi(mr) * hi(md)
+
+# add lo portions of [2],[3] to hi portion of [1].
+# add carries produced from these adds to [4].
+# lo([1]) is the final lo 16 bits of the result.
+	clr.l		%d4			# load d4 w/ zero value
+	swap		%d0			# hi([1]) <==> lo([1])
+	add.w		%d1,%d0			# hi([1]) + lo([2])
+	addx.l		%d4,%d3			#    [4]  + carry
+	add.w		%d2,%d0			# hi([1]) + lo([3])
+	addx.l		%d4,%d3			#    [4]  + carry
+	swap		%d0			# lo([1]) <==> hi([1])
+
+# lo portions of [2],[3] have been added in to final result.
+# now, clear lo, put hi in lo reg, and add to [4]
+	clr.w		%d1			# clear lo([2])
+	clr.w		%d2			# clear hi([3])
+	swap		%d1			# hi([2]) in lo d1
+	swap		%d2			# hi([3]) in lo d2
+	add.l		%d2,%d1			#    [4]  + hi([2])
+	add.l		%d3,%d1			#    [4]  + hi([3])
+
+# now, grab the condition codes. only one that can be set is 'N'.
+# 'N' CAN be set if the operation is unsigned if bit 63 is set.
+	mov.w		MUL64_CC(%a6),%d4
+	andi.b		&0x10,%d4		# keep old 'X' bit
+	tst.l		%d1			# may set 'N' bit
+	bpl.b		mulu64_ddone
+	ori.b		&0x8,%d4		# set 'N' bit
+mulu64_ddone:
+	mov.w		%d4,%cc
+
+# here, the result is in d1 and d0. the current strategy is to save
+# the values at the location pointed to by a0.
+# use movm here to not disturb the condition codes.
+mulu64_end:
+	exg		%d1,%d0
+	movm.l		&0x0003,([0x10,%a6])		# save result
+
+# EPILOGUE BEGIN ########################################################
+#	fmovm.l		(%sp)+,&0x0		# restore no fpregs
+	movm.l		(%sp)+,&0x001c		# restore d2-d4
+	unlk		%a6
+# EPILOGUE END ##########################################################
+
+	rts
+
+# one or both of the operands is zero so the result is also zero.
+# save the zero result to the register file and set the 'Z' ccode bit.
+mulu64_zero:
+	clr.l		%d0
+	clr.l		%d1
+
+	mov.w		MUL64_CC(%a6),%d4
+	andi.b		&0x10,%d4
+	ori.b		&0x4,%d4
+	mov.w		%d4,%cc			# set 'Z' ccode bit
+
+	bra.b		mulu64_end
+
+##########
+# muls.l #
+##########
+	global		_060LSP__imuls64_
+_060LSP__imuls64_:
+
+# PROLOGUE BEGIN ########################################################
+	link.w		%a6,&-4
+	movm.l		&0x3c00,-(%sp)		# save d2-d5
+#	fmovm.l		&0x0,-(%sp)		# save no fpregs
+# PROLOGUE END ##########################################################
+
+	mov.w		%cc,MUL64_CC(%a6)	# save incoming ccodes
+
+	mov.l		0x8(%a6),%d0		# store multiplier in d0
+	beq.b		mulu64_zero		# handle zero separately
+
+	mov.l		0xc(%a6),%d1		# get multiplicand in d1
+	beq.b		mulu64_zero		# handle zero separately
+
+	clr.b		%d5			# clear sign tag
+	tst.l		%d0			# is multiplier negative?
+	bge.b		muls64_chk_md_sgn	# no
+	neg.l		%d0			# make multiplier positive
+
+	ori.b		&0x1,%d5		# save multiplier sgn
+
+# the result sign is the exclusive or of the operand sign bits.
+muls64_chk_md_sgn:
+	tst.l		%d1			# is multiplicand negative?
+	bge.b		muls64_alg		# no
+	neg.l		%d1			# make multiplicand positive
+
+	eori.b		&0x1,%d5		# calculate correct sign
+
+#########################################################################
+#	63			   32				0	#
+#	----------------------------					#
+#	| hi(mplier) * hi(mplicand)|					#
+#	----------------------------					#
+#		     -----------------------------			#
+#		     | hi(mplier) * lo(mplicand) |			#
+#		     -----------------------------			#
+#		     -----------------------------			#
+#		     | lo(mplier) * hi(mplicand) |			#
+#		     -----------------------------			#
+#	  |			   -----------------------------	#
+#	--|--			   | lo(mplier) * lo(mplicand) |	#
+#	  |			   -----------------------------	#
+#	========================================================	#
+#	--------------------------------------------------------	#
+#	|	hi(result)	   |	    lo(result)         |	#
+#	--------------------------------------------------------	#
+#########################################################################
+muls64_alg:
+# load temp registers with operands
+	mov.l		%d0,%d2			# mr in d2
+	mov.l		%d0,%d3			# mr in d3
+	mov.l		%d1,%d4			# md in d4
+	swap		%d3			# hi(mr) in lo d3
+	swap		%d4			# hi(md) in lo d4
+
+# complete necessary multiplies:
+	mulu.w		%d1,%d0			# [1] lo(mr) * lo(md)
+	mulu.w		%d3,%d1			# [2] hi(mr) * lo(md)
+	mulu.w		%d4,%d2			# [3] lo(mr) * hi(md)
+	mulu.w		%d4,%d3			# [4] hi(mr) * hi(md)
+
+# add lo portions of [2],[3] to hi portion of [1].
+# add carries produced from these adds to [4].
+# lo([1]) is the final lo 16 bits of the result.
+	clr.l		%d4			# load d4 w/ zero value
+	swap		%d0			# hi([1]) <==> lo([1])
+	add.w		%d1,%d0			# hi([1]) + lo([2])
+	addx.l		%d4,%d3			#    [4]  + carry
+	add.w		%d2,%d0			# hi([1]) + lo([3])
+	addx.l		%d4,%d3			#    [4]  + carry
+	swap		%d0			# lo([1]) <==> hi([1])
+
+# lo portions of [2],[3] have been added in to final result.
+# now, clear lo, put hi in lo reg, and add to [4]
+	clr.w		%d1			# clear lo([2])
+	clr.w		%d2			# clear hi([3])
+	swap		%d1			# hi([2]) in lo d1
+	swap		%d2			# hi([3]) in lo d2
+	add.l		%d2,%d1			#    [4]  + hi([2])
+	add.l		%d3,%d1			#    [4]  + hi([3])
+
+	tst.b		%d5			# should result be signed?
+	beq.b		muls64_done		# no
+
+# result should be a signed negative number.
+# compute 2's complement of the unsigned number:
+#   -negate all bits and add 1
+muls64_neg:
+	not.l		%d0			# negate lo(result) bits
+	not.l		%d1			# negate hi(result) bits
+	addq.l		&1,%d0			# add 1 to lo(result)
+	addx.l		%d4,%d1			# add carry to hi(result)
+
+muls64_done:
+	mov.w		MUL64_CC(%a6),%d4
+	andi.b		&0x10,%d4		# keep old 'X' bit
+	tst.l		%d1			# may set 'N' bit
+	bpl.b		muls64_ddone
+	ori.b		&0x8,%d4		# set 'N' bit
+muls64_ddone:
+	mov.w		%d4,%cc
+
+# here, the result is in d1 and d0. the current strategy is to save
+# the values at the location pointed to by a0.
+# use movm here to not disturb the condition codes.
+muls64_end:
+	exg		%d1,%d0
+	movm.l		&0x0003,([0x10,%a6])	# save result at (a0)
+
+# EPILOGUE BEGIN ########################################################
+#	fmovm.l		(%sp)+,&0x0		# restore no fpregs
+	movm.l		(%sp)+,&0x003c		# restore d2-d5
+	unlk		%a6
+# EPILOGUE END ##########################################################
+
+	rts
+
+# one or both of the operands is zero so the result is also zero.
+# save the zero result to the register file and set the 'Z' ccode bit.
+muls64_zero:
+	clr.l		%d0
+	clr.l		%d1
+
+	mov.w		MUL64_CC(%a6),%d4
+	andi.b		&0x10,%d4
+	ori.b		&0x4,%d4
+	mov.w		%d4,%cc			# set 'Z' ccode bit
+
+	bra.b		muls64_end
+
+#########################################################################
+# XDEF ****************************************************************	#
+#	_060LSP__cmp2_Ab_(): Emulate "cmp2.b An,<ea>".			#
+#	_060LSP__cmp2_Aw_(): Emulate "cmp2.w An,<ea>".			#
+#	_060LSP__cmp2_Al_(): Emulate "cmp2.l An,<ea>".			#
+#	_060LSP__cmp2_Db_(): Emulate "cmp2.b Dn,<ea>".			#
+#	_060LSP__cmp2_Dw_(): Emulate "cmp2.w Dn,<ea>".			#
+#	_060LSP__cmp2_Dl_(): Emulate "cmp2.l Dn,<ea>".			#
+#									#
+#	This is the library version which is accessed as a subroutine	#
+#	and therefore does not work exactly like the 680X0 "cmp2"	#
+#	instruction.							#
+#									#
+# XREF ****************************************************************	#
+#	None								#
+#									#
+# INPUT ***************************************************************	#
+#	0x4(sp) = Rn							#
+#	0x8(sp) = pointer to boundary pair				#
+#									#
+# OUTPUT **************************************************************	#
+#	cc = condition codes are set correctly				#
+#									#
+# ALGORITHM ***********************************************************	#
+#	In the interest of simplicity, all operands are converted to	#
+# longword size whether the operation is byte, word, or long. The	#
+# bounds are sign extended accordingly. If Rn is a data register, Rn is #
+# also sign extended. If Rn is an address register, it need not be sign #
+# extended since the full register is always used.			#
+#	The condition codes are set correctly before the final "rts".	#
+#									#
+#########################################################################
+
+set	CMP2_CC,	-4
+
+	global		_060LSP__cmp2_Ab_
+_060LSP__cmp2_Ab_:
+
+# PROLOGUE BEGIN ########################################################
+	link.w		%a6,&-4
+	movm.l		&0x3800,-(%sp)		# save d2-d4
+#	fmovm.l		&0x0,-(%sp)		# save no fpregs
+# PROLOGUE END ##########################################################
+
+	mov.w		%cc,CMP2_CC(%a6)
+	mov.l		0x8(%a6), %d2		# get regval
+
+	mov.b		([0xc,%a6],0x0),%d0
+	mov.b		([0xc,%a6],0x1),%d1
+
+	extb.l		%d0			# sign extend lo bnd
+	extb.l		%d1			# sign extend hi bnd
+	bra.w		l_cmp2_cmp		# go do the compare emulation
+
+	global		_060LSP__cmp2_Aw_
+_060LSP__cmp2_Aw_:
+
+# PROLOGUE BEGIN ########################################################
+	link.w		%a6,&-4
+	movm.l		&0x3800,-(%sp)		# save d2-d4
+#	fmovm.l		&0x0,-(%sp)		# save no fpregs
+# PROLOGUE END ##########################################################
+
+	mov.w		%cc,CMP2_CC(%a6)
+	mov.l		0x8(%a6), %d2		# get regval
+
+	mov.w		([0xc,%a6],0x0),%d0
+	mov.w		([0xc,%a6],0x2),%d1
+
+	ext.l		%d0			# sign extend lo bnd
+	ext.l		%d1			# sign extend hi bnd
+	bra.w		l_cmp2_cmp		# go do the compare emulation
+
+	global		_060LSP__cmp2_Al_
+_060LSP__cmp2_Al_:
+
+# PROLOGUE BEGIN ########################################################
+	link.w		%a6,&-4
+	movm.l		&0x3800,-(%sp)		# save d2-d4
+#	fmovm.l		&0x0,-(%sp)		# save no fpregs
+# PROLOGUE END ##########################################################
+
+	mov.w		%cc,CMP2_CC(%a6)
+	mov.l		0x8(%a6), %d2		# get regval
+
+	mov.l		([0xc,%a6],0x0),%d0
+	mov.l		([0xc,%a6],0x4),%d1
+	bra.w		l_cmp2_cmp		# go do the compare emulation
+
+	global		_060LSP__cmp2_Db_
+_060LSP__cmp2_Db_:
+
+# PROLOGUE BEGIN ########################################################
+	link.w		%a6,&-4
+	movm.l		&0x3800,-(%sp)		# save d2-d4
+#	fmovm.l		&0x0,-(%sp)		# save no fpregs
+# PROLOGUE END ##########################################################
+
+	mov.w		%cc,CMP2_CC(%a6)
+	mov.l		0x8(%a6), %d2		# get regval
+
+	mov.b		([0xc,%a6],0x0),%d0
+	mov.b		([0xc,%a6],0x1),%d1
+
+	extb.l		%d0			# sign extend lo bnd
+	extb.l		%d1			# sign extend hi bnd
+
+# operation is a data register compare.
+# sign extend byte to long so we can do simple longword compares.
+	extb.l		%d2			# sign extend data byte
+	bra.w		l_cmp2_cmp		# go do the compare emulation
+
+	global		_060LSP__cmp2_Dw_
+_060LSP__cmp2_Dw_:
+
+# PROLOGUE BEGIN ########################################################
+	link.w		%a6,&-4
+	movm.l		&0x3800,-(%sp)		# save d2-d4
+#	fmovm.l		&0x0,-(%sp)		# save no fpregs
+# PROLOGUE END ##########################################################
+
+	mov.w		%cc,CMP2_CC(%a6)
+	mov.l		0x8(%a6), %d2		# get regval
+
+	mov.w		([0xc,%a6],0x0),%d0
+	mov.w		([0xc,%a6],0x2),%d1
+
+	ext.l		%d0			# sign extend lo bnd
+	ext.l		%d1			# sign extend hi bnd
+
+# operation is a data register compare.
+# sign extend word to long so we can do simple longword compares.
+	ext.l		%d2			# sign extend data word
+	bra.w		l_cmp2_cmp		# go emulate compare
+
+	global		_060LSP__cmp2_Dl_
+_060LSP__cmp2_Dl_:
+
+# PROLOGUE BEGIN ########################################################
+	link.w		%a6,&-4
+	movm.l		&0x3800,-(%sp)		# save d2-d4
+#	fmovm.l		&0x0,-(%sp)		# save no fpregs
+# PROLOGUE END ##########################################################
+
+	mov.w		%cc,CMP2_CC(%a6)
+	mov.l		0x8(%a6), %d2		# get regval
+
+	mov.l		([0xc,%a6],0x0),%d0
+	mov.l		([0xc,%a6],0x4),%d1
+
+#
+# To set the ccodes correctly:
+#	(1) save 'Z' bit from (Rn - lo)
+#	(2) save 'Z' and 'N' bits from ((hi - lo) - (Rn - hi))
+#	(3) keep 'X', 'N', and 'V' from before instruction
+#	(4) combine ccodes
+#
+l_cmp2_cmp:
+	sub.l		%d0, %d2		# (Rn - lo)
+	mov.w		%cc, %d3		# fetch resulting ccodes
+	andi.b		&0x4, %d3		# keep 'Z' bit
+	sub.l		%d0, %d1		# (hi - lo)
+	cmp.l		%d1,%d2			# ((hi - lo) - (Rn - hi))
+
+	mov.w		%cc, %d4		# fetch resulting ccodes
+	or.b		%d4, %d3		# combine w/ earlier ccodes
+	andi.b		&0x5, %d3		# keep 'Z' and 'N'
+
+	mov.w		CMP2_CC(%a6), %d4	# fetch old ccodes
+	andi.b		&0x1a, %d4		# keep 'X','N','V' bits
+	or.b		%d3, %d4		# insert new ccodes
+	mov.w		%d4,%cc			# save new ccodes
+
+# EPILOGUE BEGIN ########################################################
+#	fmovm.l		(%sp)+,&0x0		# restore no fpregs
+	movm.l		(%sp)+,&0x001c		# restore d2-d4
+	unlk		%a6
+# EPILOGUE END ##########################################################
+
+	rts