Adding debian version 4.19.249-2.debian/4.19.249-2debian

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 183 insertions, 0 deletions

diff --git a/debian/patches/features/arm/ARM-dts-add-Raspberry-Pi-Compute-Module-3-and-IO-boa.patch b/debian/patches/features/arm/ARM-dts-add-Raspberry-Pi-Compute-Module-3-and-IO-boa.patch
new file mode 100644
index 000000000..e746f9e1a
--- /dev/null
+++ b/debian/patches/features/arm/ARM-dts-add-Raspberry-Pi-Compute-Module-3-and-IO-boa.patch
@@ -0,0 +1,183 @@
+From: Stefan Wahren <stefan.wahren@i2se.com>
+Date: Mon, 27 Aug 2018 19:31:17 +0200
+Subject: ARM: dts: add Raspberry Pi Compute Module 3 and IO board
+Origin: https://git.kernel.org/linus/a54fe8a6cf66828499b121c3c39c194b43b8ed94
+
+The Raspberry Pi Compute Module 3 (CM3) and the Raspberry Pi
+Compute Module 3 Lite (CM3L) are SoMs which contains a BCM2837 processor,
+1 GB RAM and a GPIO expander. The CM3 has a 4 GB eMMC, but on the CM3L
+the eMMC is unpopulated and it's up to the user to connect their
+own SD/MMC device. The dtsi file is designed to work for both modules.
+There is also a matching carrier board which is called
+Compute Module IO Board V3.
+
+Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
+---
+ arch/arm/boot/dts/Makefile                |  1 +
+ arch/arm/boot/dts/bcm2837-rpi-cm3-io3.dts | 87 +++++++++++++++++++++++++++++++
+ arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi    | 52 ++++++++++++++++++
+ 3 files changed, 140 insertions(+)
+ create mode 100644 arch/arm/boot/dts/bcm2837-rpi-cm3-io3.dts
+ create mode 100644 arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi
+
+Index: linux/arch/arm/boot/dts/Makefile
+===================================================================
+--- linux.orig/arch/arm/boot/dts/Makefile
++++ linux/arch/arm/boot/dts/Makefile
+@@ -81,6 +81,7 @@ dtb-$(CONFIG_ARCH_BCM2835) += \
+ 	bcm2836-rpi-2-b.dtb \
+ 	bcm2837-rpi-3-b.dtb \
+ 	bcm2837-rpi-3-b-plus.dtb \
++	bcm2837-rpi-cm3-io3.dtb \
+ 	bcm2835-rpi-zero.dtb \
+ 	bcm2835-rpi-zero-w.dtb
+ dtb-$(CONFIG_ARCH_BCM_5301X) += \
+Index: linux/arch/arm/boot/dts/bcm2837-rpi-cm3-io3.dts
+===================================================================
+--- /dev/null
++++ linux/arch/arm/boot/dts/bcm2837-rpi-cm3-io3.dts
+@@ -0,0 +1,87 @@
++// SPDX-License-Identifier: GPL-2.0
++/dts-v1/;
++#include "bcm2837-rpi-cm3.dtsi"
++#include "bcm283x-rpi-usb-host.dtsi"
++
++/ {
++	compatible = "raspberrypi,3-compute-module", "brcm,bcm2837";
++	model = "Raspberry Pi Compute Module 3 IO board V3.0";
++};
++
++&gpio {
++	/*
++	 * This is based on the official GPU firmware DT blob.
++	 *
++	 * Legend:
++	 * "NC" = not connected (no rail from the SoC)
++	 * "FOO" = GPIO line named "FOO" on the schematic
++	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
++	 */
++	gpio-line-names = "GPIO0",
++			  "GPIO1",
++			  "GPIO2",
++			  "GPIO3",
++			  "GPIO4",
++			  "GPIO5",
++			  "GPIO6",
++			  "GPIO7",
++			  "GPIO8",
++			  "GPIO9",
++			  "GPIO10",
++			  "GPIO11",
++			  "GPIO12",
++			  "GPIO13",
++			  "GPIO14",
++			  "GPIO15",
++			  "GPIO16",
++			  "GPIO17",
++			  "GPIO18",
++			  "GPIO19",
++			  "GPIO20",
++			  "GPIO21",
++			  "GPIO22",
++			  "GPIO23",
++			  "GPIO24",
++			  "GPIO25",
++			  "GPIO26",
++			  "GPIO27",
++			  "GPIO28",
++			  "GPIO29",
++			  "GPIO30",
++			  "GPIO31",
++			  "GPIO32",
++			  "GPIO33",
++			  "GPIO34",
++			  "GPIO35",
++			  "GPIO36",
++			  "GPIO37",
++			  "GPIO38",
++			  "GPIO39",
++			  "GPIO40",
++			  "GPIO41",
++			  "GPIO42",
++			  "GPIO43",
++			  "GPIO44",
++			  "GPIO45",
++			  "GPIO46",
++			  "GPIO47",
++			  /* Used by eMMC */
++			  "SD_CLK_R",
++			  "SD_CMD_R",
++			  "SD_DATA0_R",
++			  "SD_DATA1_R",
++			  "SD_DATA2_R",
++			  "SD_DATA3_R";
++
++	pinctrl-0 = <&gpioout &alt0>;
++};
++
++&hdmi {
++	hpd-gpios = <&expgpio 1 GPIO_ACTIVE_LOW>;
++};
++
++&uart0 {
++	pinctrl-names = "default";
++	pinctrl-0 = <&uart0_gpio14>;
++	status = "okay";
++};
+Index: linux/arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi
+===================================================================
+--- /dev/null
++++ linux/arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi
+@@ -0,0 +1,52 @@
++// SPDX-License-Identifier: GPL-2.0
++/dts-v1/;
++#include "bcm2837.dtsi"
++#include "bcm2835-rpi.dtsi"
++
++/ {
++	memory {
++		reg = <0 0x40000000>;
++	};
++
++	reg_3v3: fixed-regulator {
++		compatible = "regulator-fixed";
++		regulator-name = "3V3";
++		regulator-min-microvolt = <3300000>;
++		regulator-max-microvolt = <3300000>;
++		regulator-always-on;
++	};
++
++	reg_1v8: fixed-regulator {
++		compatible = "regulator-fixed";
++		regulator-name = "1V8";
++		regulator-min-microvolt = <1800000>;
++		regulator-max-microvolt = <1800000>;
++		regulator-always-on;
++	};
++};
++
++&firmware {
++	expgpio: gpio {
++		compatible = "raspberrypi,firmware-gpio";
++		gpio-controller;
++		#gpio-cells = <2>;
++		gpio-line-names = "HDMI_HPD_N",
++				  "EMMC_EN_N",
++				  "NC",
++				  "NC",
++				  "NC",
++				  "NC",
++				  "NC",
++				  "NC";
++		status = "okay";
++	};
++};
++
++&sdhost {
++	pinctrl-names = "default";
++	pinctrl-0 = <&sdhost_gpio48>;
++	bus-width = <4>;
++	vmmc-supply = <&reg_3v3>;
++	vqmmc-supply = <&reg_1v8>;
++	status = "okay";
++};