Adding upstream version 4.19.249.upstream/4.19.249upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 614 insertions, 0 deletions

diff --git a/drivers/infiniband/hw/qib/qib_pcie.c b/drivers/infiniband/hw/qib/qib_pcie.c
new file mode 100644
index 000000000..5ac7b31c3
--- /dev/null
+++ b/drivers/infiniband/hw/qib/qib_pcie.c
@@ -0,0 +1,614 @@
+/*
+ * Copyright (c) 2010 - 2017 Intel Corporation.  All rights reserved.
+ * Copyright (c) 2008, 2009 QLogic Corporation. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ *     Redistribution and use in source and binary forms, with or
+ *     without modification, are permitted provided that the following
+ *     conditions are met:
+ *
+ *      - Redistributions of source code must retain the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer.
+ *
+ *      - Redistributions in binary form must reproduce the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer in the documentation and/or other materials
+ *        provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#include <linux/pci.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <linux/vmalloc.h>
+#include <linux/aer.h>
+#include <linux/module.h>
+
+#include "qib.h"
+
+/*
+ * This file contains PCIe utility routines that are common to the
+ * various QLogic InfiniPath adapters
+ */
+
+/*
+ * Code to adjust PCIe capabilities.
+ * To minimize the change footprint, we call it
+ * from qib_pcie_params, which every chip-specific
+ * file calls, even though this violates some
+ * expectations of harmlessness.
+ */
+static void qib_tune_pcie_caps(struct qib_devdata *);
+static void qib_tune_pcie_coalesce(struct qib_devdata *);
+
+/*
+ * Do all the common PCIe setup and initialization.
+ * devdata is not yet allocated, and is not allocated until after this
+ * routine returns success.  Therefore qib_dev_err() can't be used for error
+ * printing.
+ */
+int qib_pcie_init(struct pci_dev *pdev, const struct pci_device_id *ent)
+{
+	int ret;
+
+	ret = pci_enable_device(pdev);
+	if (ret) {
+		/*
+		 * This can happen (in theory) iff:
+		 * We did a chip reset, and then failed to reprogram the
+		 * BAR, or the chip reset due to an internal error.  We then
+		 * unloaded the driver and reloaded it.
+		 *
+		 * Both reset cases set the BAR back to initial state.  For
+		 * the latter case, the AER sticky error bit at offset 0x718
+		 * should be set, but the Linux kernel doesn't yet know
+		 * about that, it appears.  If the original BAR was retained
+		 * in the kernel data structures, this may be OK.
+		 */
+		qib_early_err(&pdev->dev, "pci enable failed: error %d\n",
+			      -ret);
+		goto done;
+	}
+
+	ret = pci_request_regions(pdev, QIB_DRV_NAME);
+	if (ret) {
+		qib_devinfo(pdev, "pci_request_regions fails: err %d\n", -ret);
+		goto bail;
+	}
+
+	ret = pci_set_dma_mask(pdev, DMA_BIT_MASK(64));
+	if (ret) {
+		/*
+		 * If the 64 bit setup fails, try 32 bit.  Some systems
+		 * do not setup 64 bit maps on systems with 2GB or less
+		 * memory installed.
+		 */
+		ret = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
+		if (ret) {
+			qib_devinfo(pdev, "Unable to set DMA mask: %d\n", ret);
+			goto bail;
+		}
+		ret = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
+	} else
+		ret = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64));
+	if (ret) {
+		qib_early_err(&pdev->dev,
+			      "Unable to set DMA consistent mask: %d\n", ret);
+		goto bail;
+	}
+
+	pci_set_master(pdev);
+	ret = pci_enable_pcie_error_reporting(pdev);
+	if (ret) {
+		qib_early_err(&pdev->dev,
+			      "Unable to enable pcie error reporting: %d\n",
+			      ret);
+		ret = 0;
+	}
+	goto done;
+
+bail:
+	pci_disable_device(pdev);
+	pci_release_regions(pdev);
+done:
+	return ret;
+}
+
+/*
+ * Do remaining PCIe setup, once dd is allocated, and save away
+ * fields required to re-initialize after a chip reset, or for
+ * various other purposes
+ */
+int qib_pcie_ddinit(struct qib_devdata *dd, struct pci_dev *pdev,
+		    const struct pci_device_id *ent)
+{
+	unsigned long len;
+	resource_size_t addr;
+
+	dd->pcidev = pdev;
+	pci_set_drvdata(pdev, dd);
+
+	addr = pci_resource_start(pdev, 0);
+	len = pci_resource_len(pdev, 0);
+
+	dd->kregbase = ioremap_nocache(addr, len);
+	if (!dd->kregbase)
+		return -ENOMEM;
+
+	dd->kregend = (u64 __iomem *)((void __iomem *) dd->kregbase + len);
+	dd->physaddr = addr;        /* used for io_remap, etc. */
+
+	/*
+	 * Save BARs to rewrite after device reset.  Save all 64 bits of
+	 * BAR, just in case.
+	 */
+	dd->pcibar0 = addr;
+	dd->pcibar1 = addr >> 32;
+	dd->deviceid = ent->device; /* save for later use */
+	dd->vendorid = ent->vendor;
+
+	return 0;
+}
+
+/*
+ * Do PCIe cleanup, after chip-specific cleanup, etc.  Just prior
+ * to releasing the dd memory.
+ * void because none of the core pcie cleanup returns are void
+ */
+void qib_pcie_ddcleanup(struct qib_devdata *dd)
+{
+	u64 __iomem *base = (void __iomem *) dd->kregbase;
+
+	dd->kregbase = NULL;
+	iounmap(base);
+	if (dd->piobase)
+		iounmap(dd->piobase);
+	if (dd->userbase)
+		iounmap(dd->userbase);
+	if (dd->piovl15base)
+		iounmap(dd->piovl15base);
+
+	pci_disable_device(dd->pcidev);
+	pci_release_regions(dd->pcidev);
+
+	pci_set_drvdata(dd->pcidev, NULL);
+}
+
+/**
+ * We save the msi lo and hi values, so we can restore them after
+ * chip reset (the kernel PCI infrastructure doesn't yet handle that
+ * correctly.
+ */
+static void qib_cache_msi_info(struct qib_devdata *dd, int pos)
+{
+	struct pci_dev *pdev = dd->pcidev;
+	u16 control;
+
+	pci_read_config_dword(pdev, pos + PCI_MSI_ADDRESS_LO, &dd->msi_lo);
+	pci_read_config_dword(pdev, pos + PCI_MSI_ADDRESS_HI, &dd->msi_hi);
+	pci_read_config_word(pdev, pos + PCI_MSI_FLAGS, &control);
+
+	/* now save the data (vector) info */
+	pci_read_config_word(pdev,
+			     pos + ((control & PCI_MSI_FLAGS_64BIT) ? 12 : 8),
+			     &dd->msi_data);
+}
+
+int qib_pcie_params(struct qib_devdata *dd, u32 minw, u32 *nent)
+{
+	u16 linkstat, speed;
+	int nvec;
+	int maxvec;
+	unsigned int flags = PCI_IRQ_MSIX | PCI_IRQ_MSI;
+
+	if (!pci_is_pcie(dd->pcidev)) {
+		qib_dev_err(dd, "Can't find PCI Express capability!\n");
+		/* set up something... */
+		dd->lbus_width = 1;
+		dd->lbus_speed = 2500; /* Gen1, 2.5GHz */
+		nvec = -1;
+		goto bail;
+	}
+
+	if (dd->flags & QIB_HAS_INTX)
+		flags |= PCI_IRQ_LEGACY;
+	maxvec = (nent && *nent) ? *nent : 1;
+	nvec = pci_alloc_irq_vectors(dd->pcidev, 1, maxvec, flags);
+	if (nvec < 0)
+		goto bail;
+
+	/*
+	 * If nent exists, make sure to record how many vectors were allocated.
+	 * If msix_enabled is false, return 0 so the fallback code works
+	 * correctly.
+	 */
+	if (nent)
+		*nent = !dd->pcidev->msix_enabled ? 0 : nvec;
+
+	if (dd->pcidev->msi_enabled)
+		qib_cache_msi_info(dd, dd->pcidev->msi_cap);
+
+	pcie_capability_read_word(dd->pcidev, PCI_EXP_LNKSTA, &linkstat);
+	/*
+	 * speed is bits 0-3, linkwidth is bits 4-8
+	 * no defines for them in headers
+	 */
+	speed = linkstat & 0xf;
+	linkstat >>= 4;
+	linkstat &= 0x1f;
+	dd->lbus_width = linkstat;
+
+	switch (speed) {
+	case 1:
+		dd->lbus_speed = 2500; /* Gen1, 2.5GHz */
+		break;
+	case 2:
+		dd->lbus_speed = 5000; /* Gen1, 5GHz */
+		break;
+	default: /* not defined, assume gen1 */
+		dd->lbus_speed = 2500;
+		break;
+	}
+
+	/*
+	 * Check against expected pcie width and complain if "wrong"
+	 * on first initialization, not afterwards (i.e., reset).
+	 */
+	if (minw && linkstat < minw)
+		qib_dev_err(dd,
+			    "PCIe width %u (x%u HCA), performance reduced\n",
+			    linkstat, minw);
+
+	qib_tune_pcie_caps(dd);
+
+	qib_tune_pcie_coalesce(dd);
+
+bail:
+	/* fill in string, even on errors */
+	snprintf(dd->lbus_info, sizeof(dd->lbus_info),
+		 "PCIe,%uMHz,x%u\n", dd->lbus_speed, dd->lbus_width);
+	return nvec < 0 ? nvec : 0;
+}
+
+/**
+ * qib_free_irq - Cleanup INTx and MSI interrupts
+ * @dd: valid pointer to qib dev data
+ *
+ * Since cleanup for INTx and MSI interrupts is trivial, have a common
+ * routine.
+ *
+ */
+void qib_free_irq(struct qib_devdata *dd)
+{
+	pci_free_irq(dd->pcidev, 0, dd);
+	pci_free_irq_vectors(dd->pcidev);
+}
+
+/*
+ * Setup pcie interrupt stuff again after a reset.  I'd like to just call
+ * pci_enable_msi() again for msi, but when I do that,
+ * the MSI enable bit doesn't get set in the command word, and
+ * we switch to to a different interrupt vector, which is confusing,
+ * so I instead just do it all inline.  Perhaps somehow can tie this
+ * into the PCIe hotplug support at some point
+ */
+int qib_reinit_intr(struct qib_devdata *dd)
+{
+	int pos;
+	u16 control;
+	int ret = 0;
+
+	/* If we aren't using MSI, don't restore it */
+	if (!dd->msi_lo)
+		goto bail;
+
+	pos = dd->pcidev->msi_cap;
+	if (!pos) {
+		qib_dev_err(dd,
+			"Can't find MSI capability, can't restore MSI settings\n");
+		ret = 0;
+		/* nothing special for MSIx, just MSI */
+		goto bail;
+	}
+	pci_write_config_dword(dd->pcidev, pos + PCI_MSI_ADDRESS_LO,
+			       dd->msi_lo);
+	pci_write_config_dword(dd->pcidev, pos + PCI_MSI_ADDRESS_HI,
+			       dd->msi_hi);
+	pci_read_config_word(dd->pcidev, pos + PCI_MSI_FLAGS, &control);
+	if (!(control & PCI_MSI_FLAGS_ENABLE)) {
+		control |= PCI_MSI_FLAGS_ENABLE;
+		pci_write_config_word(dd->pcidev, pos + PCI_MSI_FLAGS,
+				      control);
+	}
+	/* now rewrite the data (vector) info */
+	pci_write_config_word(dd->pcidev, pos +
+			      ((control & PCI_MSI_FLAGS_64BIT) ? 12 : 8),
+			      dd->msi_data);
+	ret = 1;
+bail:
+	qib_free_irq(dd);
+
+	if (!ret && (dd->flags & QIB_HAS_INTX))
+		ret = 1;
+
+	/* and now set the pci master bit again */
+	pci_set_master(dd->pcidev);
+
+	return ret;
+}
+
+/*
+ * These two routines are helper routines for the device reset code
+ * to move all the pcie code out of the chip-specific driver code.
+ */
+void qib_pcie_getcmd(struct qib_devdata *dd, u16 *cmd, u8 *iline, u8 *cline)
+{
+	pci_read_config_word(dd->pcidev, PCI_COMMAND, cmd);
+	pci_read_config_byte(dd->pcidev, PCI_INTERRUPT_LINE, iline);
+	pci_read_config_byte(dd->pcidev, PCI_CACHE_LINE_SIZE, cline);
+}
+
+void qib_pcie_reenable(struct qib_devdata *dd, u16 cmd, u8 iline, u8 cline)
+{
+	int r;
+
+	r = pci_write_config_dword(dd->pcidev, PCI_BASE_ADDRESS_0,
+				   dd->pcibar0);
+	if (r)
+		qib_dev_err(dd, "rewrite of BAR0 failed: %d\n", r);
+	r = pci_write_config_dword(dd->pcidev, PCI_BASE_ADDRESS_1,
+				   dd->pcibar1);
+	if (r)
+		qib_dev_err(dd, "rewrite of BAR1 failed: %d\n", r);
+	/* now re-enable memory access, and restore cosmetic settings */
+	pci_write_config_word(dd->pcidev, PCI_COMMAND, cmd);
+	pci_write_config_byte(dd->pcidev, PCI_INTERRUPT_LINE, iline);
+	pci_write_config_byte(dd->pcidev, PCI_CACHE_LINE_SIZE, cline);
+	r = pci_enable_device(dd->pcidev);
+	if (r)
+		qib_dev_err(dd,
+			"pci_enable_device failed after reset: %d\n", r);
+}
+
+
+static int qib_pcie_coalesce;
+module_param_named(pcie_coalesce, qib_pcie_coalesce, int, S_IRUGO);
+MODULE_PARM_DESC(pcie_coalesce, "tune PCIe colescing on some Intel chipsets");
+
+/*
+ * Enable PCIe completion and data coalescing, on Intel 5x00 and 7300
+ * chipsets.   This is known to be unsafe for some revisions of some
+ * of these chipsets, with some BIOS settings, and enabling it on those
+ * systems may result in the system crashing, and/or data corruption.
+ */
+static void qib_tune_pcie_coalesce(struct qib_devdata *dd)
+{
+	struct pci_dev *parent;
+	u16 devid;
+	u32 mask, bits, val;
+
+	if (!qib_pcie_coalesce)
+		return;
+
+	/* Find out supported and configured values for parent (root) */
+	parent = dd->pcidev->bus->self;
+	if (parent->bus->parent) {
+		qib_devinfo(dd->pcidev, "Parent not root\n");
+		return;
+	}
+	if (!pci_is_pcie(parent))
+		return;
+	if (parent->vendor != 0x8086)
+		return;
+
+	/*
+	 *  - bit 12: Max_rdcmp_Imt_EN: need to set to 1
+	 *  - bit 11: COALESCE_FORCE: need to set to 0
+	 *  - bit 10: COALESCE_EN: need to set to 1
+	 *  (but limitations on some on some chipsets)
+	 *
+	 *  On the Intel 5000, 5100, and 7300 chipsets, there is
+	 *  also: - bit 25:24: COALESCE_MODE, need to set to 0
+	 */
+	devid = parent->device;
+	if (devid >= 0x25e2 && devid <= 0x25fa) {
+		/* 5000 P/V/X/Z */
+		if (parent->revision <= 0xb2)
+			bits = 1U << 10;
+		else
+			bits = 7U << 10;
+		mask = (3U << 24) | (7U << 10);
+	} else if (devid >= 0x65e2 && devid <= 0x65fa) {
+		/* 5100 */
+		bits = 1U << 10;
+		mask = (3U << 24) | (7U << 10);
+	} else if (devid >= 0x4021 && devid <= 0x402e) {
+		/* 5400 */
+		bits = 7U << 10;
+		mask = 7U << 10;
+	} else if (devid >= 0x3604 && devid <= 0x360a) {
+		/* 7300 */
+		bits = 7U << 10;
+		mask = (3U << 24) | (7U << 10);
+	} else {
+		/* not one of the chipsets that we know about */
+		return;
+	}
+	pci_read_config_dword(parent, 0x48, &val);
+	val &= ~mask;
+	val |= bits;
+	pci_write_config_dword(parent, 0x48, val);
+}
+
+/*
+ * BIOS may not set PCIe bus-utilization parameters for best performance.
+ * Check and optionally adjust them to maximize our throughput.
+ */
+static int qib_pcie_caps;
+module_param_named(pcie_caps, qib_pcie_caps, int, S_IRUGO);
+MODULE_PARM_DESC(pcie_caps, "Max PCIe tuning: Payload (0..3), ReadReq (4..7)");
+
+static void qib_tune_pcie_caps(struct qib_devdata *dd)
+{
+	struct pci_dev *parent;
+	u16 rc_mpss, rc_mps, ep_mpss, ep_mps;
+	u16 rc_mrrs, ep_mrrs, max_mrrs;
+
+	/* Find out supported and configured values for parent (root) */
+	parent = dd->pcidev->bus->self;
+	if (!pci_is_root_bus(parent->bus)) {
+		qib_devinfo(dd->pcidev, "Parent not root\n");
+		return;
+	}
+
+	if (!pci_is_pcie(parent) || !pci_is_pcie(dd->pcidev))
+		return;
+
+	rc_mpss = parent->pcie_mpss;
+	rc_mps = ffs(pcie_get_mps(parent)) - 8;
+	/* Find out supported and configured values for endpoint (us) */
+	ep_mpss = dd->pcidev->pcie_mpss;
+	ep_mps = ffs(pcie_get_mps(dd->pcidev)) - 8;
+
+	/* Find max payload supported by root, endpoint */
+	if (rc_mpss > ep_mpss)
+		rc_mpss = ep_mpss;
+
+	/* If Supported greater than limit in module param, limit it */
+	if (rc_mpss > (qib_pcie_caps & 7))
+		rc_mpss = qib_pcie_caps & 7;
+	/* If less than (allowed, supported), bump root payload */
+	if (rc_mpss > rc_mps) {
+		rc_mps = rc_mpss;
+		pcie_set_mps(parent, 128 << rc_mps);
+	}
+	/* If less than (allowed, supported), bump endpoint payload */
+	if (rc_mpss > ep_mps) {
+		ep_mps = rc_mpss;
+		pcie_set_mps(dd->pcidev, 128 << ep_mps);
+	}
+
+	/*
+	 * Now the Read Request size.
+	 * No field for max supported, but PCIe spec limits it to 4096,
+	 * which is code '5' (log2(4096) - 7)
+	 */
+	max_mrrs = 5;
+	if (max_mrrs > ((qib_pcie_caps >> 4) & 7))
+		max_mrrs = (qib_pcie_caps >> 4) & 7;
+
+	max_mrrs = 128 << max_mrrs;
+	rc_mrrs = pcie_get_readrq(parent);
+	ep_mrrs = pcie_get_readrq(dd->pcidev);
+
+	if (max_mrrs > rc_mrrs) {
+		rc_mrrs = max_mrrs;
+		pcie_set_readrq(parent, rc_mrrs);
+	}
+	if (max_mrrs > ep_mrrs) {
+		ep_mrrs = max_mrrs;
+		pcie_set_readrq(dd->pcidev, ep_mrrs);
+	}
+}
+/* End of PCIe capability tuning */
+
+/*
+ * From here through qib_pci_err_handler definition is invoked via
+ * PCI error infrastructure, registered via pci
+ */
+static pci_ers_result_t
+qib_pci_error_detected(struct pci_dev *pdev, pci_channel_state_t state)
+{
+	struct qib_devdata *dd = pci_get_drvdata(pdev);
+	pci_ers_result_t ret = PCI_ERS_RESULT_RECOVERED;
+
+	switch (state) {
+	case pci_channel_io_normal:
+		qib_devinfo(pdev, "State Normal, ignoring\n");
+		break;
+
+	case pci_channel_io_frozen:
+		qib_devinfo(pdev, "State Frozen, requesting reset\n");
+		pci_disable_device(pdev);
+		ret = PCI_ERS_RESULT_NEED_RESET;
+		break;
+
+	case pci_channel_io_perm_failure:
+		qib_devinfo(pdev, "State Permanent Failure, disabling\n");
+		if (dd) {
+			/* no more register accesses! */
+			dd->flags &= ~QIB_PRESENT;
+			qib_disable_after_error(dd);
+		}
+		 /* else early, or other problem */
+		ret =  PCI_ERS_RESULT_DISCONNECT;
+		break;
+
+	default: /* shouldn't happen */
+		qib_devinfo(pdev, "QIB PCI errors detected (state %d)\n",
+			state);
+		break;
+	}
+	return ret;
+}
+
+static pci_ers_result_t
+qib_pci_mmio_enabled(struct pci_dev *pdev)
+{
+	u64 words = 0U;
+	struct qib_devdata *dd = pci_get_drvdata(pdev);
+	pci_ers_result_t ret = PCI_ERS_RESULT_RECOVERED;
+
+	if (dd && dd->pport) {
+		words = dd->f_portcntr(dd->pport, QIBPORTCNTR_WORDRCV);
+		if (words == ~0ULL)
+			ret = PCI_ERS_RESULT_NEED_RESET;
+	}
+	qib_devinfo(pdev,
+		"QIB mmio_enabled function called, read wordscntr %Lx, returning %d\n",
+		words, ret);
+	return  ret;
+}
+
+static pci_ers_result_t
+qib_pci_slot_reset(struct pci_dev *pdev)
+{
+	qib_devinfo(pdev, "QIB slot_reset function called, ignored\n");
+	return PCI_ERS_RESULT_CAN_RECOVER;
+}
+
+static void
+qib_pci_resume(struct pci_dev *pdev)
+{
+	struct qib_devdata *dd = pci_get_drvdata(pdev);
+
+	qib_devinfo(pdev, "QIB resume function called\n");
+	pci_cleanup_aer_uncorrect_error_status(pdev);
+	/*
+	 * Running jobs will fail, since it's asynchronous
+	 * unlike sysfs-requested reset.   Better than
+	 * doing nothing.
+	 */
+	qib_init(dd, 1); /* same as re-init after reset */
+}
+
+const struct pci_error_handlers qib_pci_err_handler = {
+	.error_detected = qib_pci_error_detected,
+	.mmio_enabled = qib_pci_mmio_enabled,
+	.slot_reset = qib_pci_slot_reset,
+	.resume = qib_pci_resume,
+};