Adding upstream version 4.19.249.upstream/4.19.249upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 267 insertions, 0 deletions

diff --git a/drivers/misc/ds1682.c b/drivers/misc/ds1682.c
new file mode 100644
index 000000000..98a921ea9
--- /dev/null
+++ b/drivers/misc/ds1682.c
@@ -0,0 +1,267 @@
+/*
+ * Dallas Semiconductor DS1682 Elapsed Time Recorder device driver
+ *
+ * Written by: Grant Likely <grant.likely@secretlab.ca>
+ *
+ * Copyright (C) 2007 Secret Lab Technologies Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * The DS1682 elapsed timer recorder is a simple device that implements
+ * one elapsed time counter, one event counter, an alarm signal and 10
+ * bytes of general purpose EEPROM.
+ *
+ * This driver provides access to the DS1682 counters and user data via
+ * the sysfs.  The following attributes are added to the device node:
+ *     elapsed_time (u32): Total elapsed event time in ms resolution
+ *     alarm_time (u32): When elapsed time exceeds the value in alarm_time,
+ *                       then the alarm pin is asserted.
+ *     event_count (u16): number of times the event pin has gone low.
+ *     eeprom (u8[10]): general purpose EEPROM
+ *
+ * Counter registers and user data are both read/write unless the device
+ * has been write protected.  This driver does not support turning off write
+ * protection.  Once write protection is turned on, it is impossible to
+ * turn it off again, so I have left the feature out of this driver to avoid
+ * accidental enabling, but it is trivial to add write protect support.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/string.h>
+#include <linux/list.h>
+#include <linux/sysfs.h>
+#include <linux/ctype.h>
+#include <linux/hwmon-sysfs.h>
+
+/* Device registers */
+#define DS1682_REG_CONFIG		0x00
+#define DS1682_REG_ALARM		0x01
+#define DS1682_REG_ELAPSED		0x05
+#define DS1682_REG_EVT_CNTR		0x09
+#define DS1682_REG_EEPROM		0x0b
+#define DS1682_REG_RESET		0x1d
+#define DS1682_REG_WRITE_DISABLE	0x1e
+#define DS1682_REG_WRITE_MEM_DISABLE	0x1f
+
+#define DS1682_EEPROM_SIZE		10
+
+/*
+ * Generic counter attributes
+ */
+static ssize_t ds1682_show(struct device *dev, struct device_attribute *attr,
+			   char *buf)
+{
+	struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
+	struct i2c_client *client = to_i2c_client(dev);
+	unsigned long long val, check;
+	__le32 val_le = 0;
+	int rc;
+
+	dev_dbg(dev, "ds1682_show() called on %s\n", attr->attr.name);
+
+	/* Read the register */
+	rc = i2c_smbus_read_i2c_block_data(client, sattr->index, sattr->nr,
+					   (u8 *)&val_le);
+	if (rc < 0)
+		return -EIO;
+
+	val = le32_to_cpu(val_le);
+
+	if (sattr->index == DS1682_REG_ELAPSED) {
+		int retries = 5;
+
+		/* Detect and retry when a tick occurs mid-read */
+		do {
+			rc = i2c_smbus_read_i2c_block_data(client, sattr->index,
+							   sattr->nr,
+							   (u8 *)&val_le);
+			if (rc < 0 || retries <= 0)
+				return -EIO;
+
+			check = val;
+			val = le32_to_cpu(val_le);
+			retries--;
+		} while (val != check && val != (check + 1));
+	}
+
+	/* Format the output string and return # of bytes
+	 * Special case: the 32 bit regs are time values with 1/4s
+	 * resolution, scale them up to milliseconds
+	 */
+	return sprintf(buf, "%llu\n", (sattr->nr == 4) ? (val * 250) : val);
+}
+
+static ssize_t ds1682_store(struct device *dev, struct device_attribute *attr,
+			    const char *buf, size_t count)
+{
+	struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
+	struct i2c_client *client = to_i2c_client(dev);
+	u64 val;
+	__le32 val_le;
+	int rc;
+
+	dev_dbg(dev, "ds1682_store() called on %s\n", attr->attr.name);
+
+	/* Decode input */
+	rc = kstrtoull(buf, 0, &val);
+	if (rc < 0) {
+		dev_dbg(dev, "input string not a number\n");
+		return -EINVAL;
+	}
+
+	/* Special case: the 32 bit regs are time values with 1/4s
+	 * resolution, scale input down to quarter-seconds */
+	if (sattr->nr == 4)
+		do_div(val, 250);
+
+	/* write out the value */
+	val_le = cpu_to_le32(val);
+	rc = i2c_smbus_write_i2c_block_data(client, sattr->index, sattr->nr,
+					    (u8 *) & val_le);
+	if (rc < 0) {
+		dev_err(dev, "register write failed; reg=0x%x, size=%i\n",
+			sattr->index, sattr->nr);
+		return -EIO;
+	}
+
+	return count;
+}
+
+/*
+ * Simple register attributes
+ */
+static SENSOR_DEVICE_ATTR_2(elapsed_time, S_IRUGO | S_IWUSR, ds1682_show,
+			    ds1682_store, 4, DS1682_REG_ELAPSED);
+static SENSOR_DEVICE_ATTR_2(alarm_time, S_IRUGO | S_IWUSR, ds1682_show,
+			    ds1682_store, 4, DS1682_REG_ALARM);
+static SENSOR_DEVICE_ATTR_2(event_count, S_IRUGO | S_IWUSR, ds1682_show,
+			    ds1682_store, 2, DS1682_REG_EVT_CNTR);
+
+static const struct attribute_group ds1682_group = {
+	.attrs = (struct attribute *[]) {
+		&sensor_dev_attr_elapsed_time.dev_attr.attr,
+		&sensor_dev_attr_alarm_time.dev_attr.attr,
+		&sensor_dev_attr_event_count.dev_attr.attr,
+		NULL,
+	},
+};
+
+/*
+ * User data attribute
+ */
+static ssize_t ds1682_eeprom_read(struct file *filp, struct kobject *kobj,
+				  struct bin_attribute *attr,
+				  char *buf, loff_t off, size_t count)
+{
+	struct i2c_client *client = kobj_to_i2c_client(kobj);
+	int rc;
+
+	dev_dbg(&client->dev, "ds1682_eeprom_read(p=%p, off=%lli, c=%zi)\n",
+		buf, off, count);
+
+	rc = i2c_smbus_read_i2c_block_data(client, DS1682_REG_EEPROM + off,
+					   count, buf);
+	if (rc < 0)
+		return -EIO;
+
+	return count;
+}
+
+static ssize_t ds1682_eeprom_write(struct file *filp, struct kobject *kobj,
+				   struct bin_attribute *attr,
+				   char *buf, loff_t off, size_t count)
+{
+	struct i2c_client *client = kobj_to_i2c_client(kobj);
+
+	dev_dbg(&client->dev, "ds1682_eeprom_write(p=%p, off=%lli, c=%zi)\n",
+		buf, off, count);
+
+	/* Write out to the device */
+	if (i2c_smbus_write_i2c_block_data(client, DS1682_REG_EEPROM + off,
+					   count, buf) < 0)
+		return -EIO;
+
+	return count;
+}
+
+static const struct bin_attribute ds1682_eeprom_attr = {
+	.attr = {
+		.name = "eeprom",
+		.mode = S_IRUGO | S_IWUSR,
+	},
+	.size = DS1682_EEPROM_SIZE,
+	.read = ds1682_eeprom_read,
+	.write = ds1682_eeprom_write,
+};
+
+/*
+ * Called when a ds1682 device is matched with this driver
+ */
+static int ds1682_probe(struct i2c_client *client,
+			const struct i2c_device_id *id)
+{
+	int rc;
+
+	if (!i2c_check_functionality(client->adapter,
+				     I2C_FUNC_SMBUS_I2C_BLOCK)) {
+		dev_err(&client->dev, "i2c bus does not support the ds1682\n");
+		rc = -ENODEV;
+		goto exit;
+	}
+
+	rc = sysfs_create_group(&client->dev.kobj, &ds1682_group);
+	if (rc)
+		goto exit;
+
+	rc = sysfs_create_bin_file(&client->dev.kobj, &ds1682_eeprom_attr);
+	if (rc)
+		goto exit_bin_attr;
+
+	return 0;
+
+ exit_bin_attr:
+	sysfs_remove_group(&client->dev.kobj, &ds1682_group);
+ exit:
+	return rc;
+}
+
+static int ds1682_remove(struct i2c_client *client)
+{
+	sysfs_remove_bin_file(&client->dev.kobj, &ds1682_eeprom_attr);
+	sysfs_remove_group(&client->dev.kobj, &ds1682_group);
+	return 0;
+}
+
+static const struct i2c_device_id ds1682_id[] = {
+	{ "ds1682", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, ds1682_id);
+
+static const struct of_device_id ds1682_of_match[] = {
+	{ .compatible = "dallas,ds1682", },
+	{}
+};
+MODULE_DEVICE_TABLE(of, ds1682_of_match);
+
+static struct i2c_driver ds1682_driver = {
+	.driver = {
+		.name = "ds1682",
+		.of_match_table = ds1682_of_match,
+	},
+	.probe = ds1682_probe,
+	.remove = ds1682_remove,
+	.id_table = ds1682_id,
+};
+
+module_i2c_driver(ds1682_driver);
+
+MODULE_AUTHOR("Grant Likely <grant.likely@secretlab.ca>");
+MODULE_DESCRIPTION("DS1682 Elapsed Time Indicator driver");
+MODULE_LICENSE("GPL");