Adding upstream version 4.19.249.upstream/4.19.249upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 166 insertions, 0 deletions

diff --git a/drivers/soc/qcom/Kconfig b/drivers/soc/qcom/Kconfig
new file mode 100644
index 000000000..ba79b609a
--- /dev/null
+++ b/drivers/soc/qcom/Kconfig
@@ -0,0 +1,166 @@
+#
+# QCOM Soc drivers
+#
+menu "Qualcomm SoC drivers"
+
+config QCOM_COMMAND_DB
+	bool "Qualcomm Command DB"
+	depends on ARCH_QCOM || COMPILE_TEST
+	depends on OF_RESERVED_MEM
+	help
+	  Command DB queries shared memory by key string for shared system
+	  resources. Platform drivers that require to set state of a shared
+	  resource on a RPM-hardened platform must use this database to get
+	  SoC specific identifier and information for the shared resources.
+
+config QCOM_GENI_SE
+	tristate "QCOM GENI Serial Engine Driver"
+	depends on ARCH_QCOM || COMPILE_TEST
+	help
+	  This driver is used to manage Generic Interface (GENI) firmware based
+	  Qualcomm Technologies, Inc. Universal Peripheral (QUP) Wrapper. This
+	  driver is also used to manage the common aspects of multiple Serial
+	  Engines present in the QUP.
+
+config QCOM_GLINK_SSR
+	tristate "Qualcomm Glink SSR driver"
+	depends on RPMSG
+	depends on QCOM_RPROC_COMMON
+	help
+	  Say y here to enable GLINK SSR support. The GLINK SSR driver
+	  implements the SSR protocol for notifying the remote processor about
+	  neighboring subsystems going up or down.
+
+config QCOM_GSBI
+        tristate "QCOM General Serial Bus Interface"
+        depends on ARCH_QCOM
+        select MFD_SYSCON
+        help
+          Say y here to enable GSBI support.  The GSBI provides control
+          functions for connecting the underlying serial UART, SPI, and I2C
+          devices to the output pins.
+
+config QCOM_LLCC
+	tristate "Qualcomm Technologies, Inc. LLCC driver"
+	depends on ARCH_QCOM
+	help
+	  Qualcomm Technologies, Inc. platform specific
+	  Last Level Cache Controller(LLCC) driver. This provides interfaces
+	  to clients that use the LLCC. Say yes here to enable LLCC slice
+	  driver.
+
+config QCOM_SDM845_LLCC
+	tristate "Qualcomm Technologies, Inc. SDM845 LLCC driver"
+	depends on QCOM_LLCC
+	help
+	  Say yes here to enable the LLCC driver for SDM845. This provides
+	  data required to configure LLCC so that clients can start using the
+	  LLCC slices.
+
+config QCOM_MDT_LOADER
+	tristate
+	select QCOM_SCM
+
+config QCOM_PM
+	bool "Qualcomm Power Management"
+	depends on ARCH_QCOM && !ARM64
+	select ARM_CPU_SUSPEND
+	select QCOM_SCM
+	help
+	  QCOM Platform specific power driver to manage cores and L2 low power
+	  modes. It interface with various system drivers to put the cores in
+	  low power modes.
+
+config QCOM_QMI_HELPERS
+	tristate
+	depends on ARCH_QCOM && NET
+	help
+	  Helper library for handling QMI encoded messages.  QMI encoded
+	  messages are used in communication between the majority of QRTR
+	  clients and this helpers provide the common functionality needed for
+	  doing this from a kernel driver.
+
+config QCOM_RMTFS_MEM
+	tristate "Qualcomm Remote Filesystem memory driver"
+	depends on ARCH_QCOM
+	select QCOM_SCM
+	help
+	  The Qualcomm remote filesystem memory driver is used for allocating
+	  and exposing regions of shared memory with remote processors for the
+	  purpose of exchanging sector-data between the remote filesystem
+	  service and its clients.
+
+	  Say y here if you intend to boot the modem remoteproc.
+
+config QCOM_RPMH
+	bool "Qualcomm RPM-Hardened (RPMH) Communication"
+	depends on ARCH_QCOM && ARM64 && OF || COMPILE_TEST
+	help
+	  Support for communication with the hardened-RPM blocks in
+	  Qualcomm Technologies Inc (QTI) SoCs. RPMH communication uses an
+	  internal bus to transmit state requests for shared resources. A set
+	  of hardware components aggregate requests for these resources and
+	  help apply the aggregated state on the resource.
+
+config QCOM_SMEM
+	tristate "Qualcomm Shared Memory Manager (SMEM)"
+	depends on ARCH_QCOM
+	depends on HWSPINLOCK
+	help
+	  Say y here to enable support for the Qualcomm Shared Memory Manager.
+	  The driver provides an interface to items in a heap shared among all
+	  processors in a Qualcomm platform.
+
+config QCOM_SMD_RPM
+	tristate "Qualcomm Resource Power Manager (RPM) over SMD"
+	depends on ARCH_QCOM
+	depends on RPMSG && OF
+	help
+	  If you say yes to this option, support will be included for the
+	  Resource Power Manager system found in the Qualcomm 8974 based
+	  devices.
+
+	  This is required to access many regulators, clocks and bus
+	  frequencies controlled by the RPM on these devices.
+
+	  Say M here if you want to include support for the Qualcomm RPM as a
+	  module. This will build a module called "qcom-smd-rpm".
+
+config QCOM_SMEM_STATE
+	bool
+
+config QCOM_SMP2P
+	tristate "Qualcomm Shared Memory Point to Point support"
+	depends on MAILBOX
+	depends on QCOM_SMEM
+	select QCOM_SMEM_STATE
+	help
+	  Say yes here to support the Qualcomm Shared Memory Point to Point
+	  protocol.
+
+config QCOM_SMSM
+	tristate "Qualcomm Shared Memory State Machine"
+	depends on QCOM_SMEM
+	select QCOM_SMEM_STATE
+	help
+	  Say yes here to support the Qualcomm Shared Memory State Machine.
+	  The state machine is represented by bits in shared memory.
+
+config QCOM_WCNSS_CTRL
+	tristate "Qualcomm WCNSS control driver"
+	depends on ARCH_QCOM
+	depends on RPMSG
+	help
+	  Client driver for the WCNSS_CTRL SMD channel, used to download nv
+	  firmware to a newly booted WCNSS chip.
+
+config QCOM_APR
+	tristate "Qualcomm APR Bus (Asynchronous Packet Router)"
+	depends on ARCH_QCOM
+	depends on RPMSG
+	help
+          Enable APR IPC protocol support between
+          application processor and QDSP6. APR is
+          used by audio driver to configure QDSP6
+          ASM, ADM and AFE modules.
+endmenu