Adding upstream version 4.19.249.upstream/4.19.249upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 129 insertions, 0 deletions

diff --git a/drivers/video/console/Kconfig b/drivers/video/console/Kconfig
new file mode 100644
index 000000000..40d5fea85
--- /dev/null
+++ b/drivers/video/console/Kconfig
@@ -0,0 +1,129 @@
+#
+# Video configuration
+#
+
+menu "Console display driver support"
+
+config VGA_CONSOLE
+	bool "VGA text console" if EXPERT || !X86
+	depends on !4xx && !PPC_8xx && !SPARC && !M68K && !PARISC &&  !SUPERH && \
+		(!ARM || ARCH_FOOTBRIDGE || ARCH_INTEGRATOR || ARCH_NETWINDER) && \
+		!ARM64 && !ARC && !MICROBLAZE && !OPENRISC && !NDS32 && !S390
+	default y
+	help
+	  Saying Y here will allow you to use Linux in text mode through a
+	  display that complies with the generic VGA standard. Virtually
+	  everyone wants that.
+
+	  The program SVGATextMode can be used to utilize SVGA video cards to
+	  their full potential in text mode. Download it from
+	  <ftp://ibiblio.org/pub/Linux/utils/console/>.
+
+	  Say Y.
+
+config MDA_CONSOLE
+	depends on !M68K && !PARISC && ISA
+	tristate "MDA text console (dual-headed)"
+	---help---
+	  Say Y here if you have an old MDA or monochrome Hercules graphics
+	  adapter in your system acting as a second head ( = video card). You
+	  will then be able to use two monitors with your Linux system. Do not
+	  say Y here if your MDA card is the primary card in your system; the
+	  normal VGA driver will handle it.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called mdacon.
+
+	  If unsure, say N.
+
+config SGI_NEWPORT_CONSOLE
+        tristate "SGI Newport Console support"
+	depends on SGI_IP22 && HAS_IOMEM
+        select FONT_SUPPORT
+        help
+          Say Y here if you want the console on the Newport aka XL graphics
+          card of your Indy.  Most people say Y here.
+
+config DUMMY_CONSOLE
+	bool
+	depends on VGA_CONSOLE!=y || SGI_NEWPORT_CONSOLE!=y 
+	default y
+
+config DUMMY_CONSOLE_COLUMNS
+        int "Initial number of console screen columns"
+        depends on DUMMY_CONSOLE && !ARM
+        default 160 if PARISC
+        default 80
+        help
+          On PA-RISC, the default value is 160, which should fit a 1280x1024
+          monitor.
+          Select 80 if you use a 640x480 resolution by default.
+
+config DUMMY_CONSOLE_ROWS
+        int "Initial number of console screen rows"
+        depends on DUMMY_CONSOLE && !ARM
+        default 64 if PARISC
+        default 25
+        help
+          On PA-RISC, the default value is 64, which should fit a 1280x1024
+          monitor.
+          Select 25 if you use a 640x480 resolution by default.
+
+config FRAMEBUFFER_CONSOLE
+	bool "Framebuffer Console support"
+	depends on FB && !UML
+	select VT_HW_CONSOLE_BINDING
+	select CRC32
+	select FONT_SUPPORT
+	help
+	  Low-level framebuffer-based console driver.
+
+config FRAMEBUFFER_CONSOLE_DETECT_PRIMARY
+       bool "Map the console to the primary display device"
+       depends on FRAMEBUFFER_CONSOLE
+       default n
+       ---help---
+         If this option is selected, the framebuffer console will
+         automatically select the primary display device (if the architecture
+	 supports this feature).  Otherwise, the framebuffer console will
+         always select the first framebuffer driver that is loaded. The latter
+         is the default behavior.
+
+	 You can always override the automatic selection of the primary device
+	 by using the fbcon=map: boot option.
+
+	 If unsure, select n.
+
+config FRAMEBUFFER_CONSOLE_ROTATION
+       bool "Framebuffer Console Rotation"
+       depends on FRAMEBUFFER_CONSOLE
+       help
+         Enable display rotation for the framebuffer console.  This is done
+         in software and may be significantly slower than a normally oriented
+         display.  Note that the rotation is done at the console level only
+         such that other users of the framebuffer will remain normally
+         oriented.
+
+config FRAMEBUFFER_CONSOLE_DEFERRED_TAKEOVER
+	bool "Framebuffer Console Deferred Takeover"
+	depends on FB=y && FRAMEBUFFER_CONSOLE && DUMMY_CONSOLE
+	help
+	  If enabled this defers the framebuffer console taking over the
+	  console from the dummy console until the first text is displayed on
+	  the console. This is useful in combination with the "quiet" kernel
+	  commandline option to keep the framebuffer contents initially put up
+	  by the firmware in place, rather then replacing the contents with a
+	  black screen as soon as fbcon loads.
+
+config STI_CONSOLE
+        bool "STI text console"
+	depends on PARISC && HAS_IOMEM
+        select FONT_SUPPORT
+        default y
+        help
+          The STI console is the builtin display/keyboard on HP-PARISC
+          machines.  Say Y here to build support for it into your kernel.
+          The alternative is to use your primary serial port as a console.
+
+endmenu
+