Adding upstream version 4.19.249.upstream/4.19.249upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 387 insertions, 0 deletions

diff --git a/include/media/v4l2-common.h b/include/media/v4l2-common.h
new file mode 100644
index 000000000..cdc87ec61
--- /dev/null
+++ b/include/media/v4l2-common.h
@@ -0,0 +1,387 @@
+/*
+    v4l2 common internal API header
+
+    This header contains internal shared ioctl definitions for use by the
+    internal low-level v4l2 drivers.
+    Each ioctl begins with VIDIOC_INT_ to clearly mark that it is an internal
+    define,
+
+    Copyright (C) 2005  Hans Verkuil <hverkuil@xs4all.nl>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef V4L2_COMMON_H_
+#define V4L2_COMMON_H_
+
+#include <media/v4l2-dev.h>
+
+/* Common printk constructs for v4l-i2c drivers. These macros create a unique
+   prefix consisting of the driver name, the adapter number and the i2c
+   address. */
+#define v4l_printk(level, name, adapter, addr, fmt, arg...) \
+	printk(level "%s %d-%04x: " fmt, name, i2c_adapter_id(adapter), addr , ## arg)
+
+#define v4l_client_printk(level, client, fmt, arg...)			    \
+	v4l_printk(level, (client)->dev.driver->name, (client)->adapter, \
+		   (client)->addr, fmt , ## arg)
+
+#define v4l_err(client, fmt, arg...) \
+	v4l_client_printk(KERN_ERR, client, fmt , ## arg)
+
+#define v4l_warn(client, fmt, arg...) \
+	v4l_client_printk(KERN_WARNING, client, fmt , ## arg)
+
+#define v4l_info(client, fmt, arg...) \
+	v4l_client_printk(KERN_INFO, client, fmt , ## arg)
+
+/* These three macros assume that the debug level is set with a module
+   parameter called 'debug'. */
+#define v4l_dbg(level, debug, client, fmt, arg...)			     \
+	do {								     \
+		if (debug >= (level))					     \
+			v4l_client_printk(KERN_DEBUG, client, fmt , ## arg); \
+	} while (0)
+
+/* Add a version of v4l_dbg to be used on drivers using dev_foo() macros */
+#define dev_dbg_lvl(__dev, __level, __debug, __fmt, __arg...)		\
+	do {								\
+		if (__debug >= (__level))				\
+			dev_printk(KERN_DEBUG, __dev, __fmt, ##__arg);	\
+	} while (0)
+
+/* ------------------------------------------------------------------------- */
+
+/* These printk constructs can be used with v4l2_device and v4l2_subdev */
+#define v4l2_printk(level, dev, fmt, arg...) \
+	printk(level "%s: " fmt, (dev)->name , ## arg)
+
+#define v4l2_err(dev, fmt, arg...) \
+	v4l2_printk(KERN_ERR, dev, fmt , ## arg)
+
+#define v4l2_warn(dev, fmt, arg...) \
+	v4l2_printk(KERN_WARNING, dev, fmt , ## arg)
+
+#define v4l2_info(dev, fmt, arg...) \
+	v4l2_printk(KERN_INFO, dev, fmt , ## arg)
+
+/* These three macros assume that the debug level is set with a module
+   parameter called 'debug'. */
+#define v4l2_dbg(level, debug, dev, fmt, arg...)			\
+	do {								\
+		if (debug >= (level))					\
+			v4l2_printk(KERN_DEBUG, dev, fmt , ## arg);	\
+	} while (0)
+
+/**
+ * v4l2_ctrl_query_fill- Fill in a struct v4l2_queryctrl
+ *
+ * @qctrl: pointer to the &struct v4l2_queryctrl to be filled
+ * @min: minimum value for the control
+ * @max: maximum value for the control
+ * @step: control step
+ * @def: default value for the control
+ *
+ * Fills the &struct v4l2_queryctrl fields for the query control.
+ *
+ * .. note::
+ *
+ *    This function assumes that the @qctrl->id field is filled.
+ *
+ * Returns -EINVAL if the control is not known by the V4L2 core, 0 on success.
+ */
+
+int v4l2_ctrl_query_fill(struct v4l2_queryctrl *qctrl,
+			 s32 min, s32 max, s32 step, s32 def);
+
+/* ------------------------------------------------------------------------- */
+
+/* I2C Helper functions */
+
+struct i2c_driver;
+struct i2c_adapter;
+struct i2c_client;
+struct i2c_device_id;
+struct v4l2_device;
+struct v4l2_subdev;
+struct v4l2_subdev_ops;
+
+/**
+ * v4l2_i2c_new_subdev - Load an i2c module and return an initialized
+ *	&struct v4l2_subdev.
+ *
+ * @v4l2_dev: pointer to &struct v4l2_device
+ * @adapter: pointer to struct i2c_adapter
+ * @client_type:  name of the chip that's on the adapter.
+ * @addr: I2C address. If zero, it will use @probe_addrs
+ * @probe_addrs: array with a list of address. The last entry at such
+ *	array should be %I2C_CLIENT_END.
+ *
+ * returns a &struct v4l2_subdev pointer.
+ */
+struct v4l2_subdev *v4l2_i2c_new_subdev(struct v4l2_device *v4l2_dev,
+		struct i2c_adapter *adapter, const char *client_type,
+		u8 addr, const unsigned short *probe_addrs);
+
+struct i2c_board_info;
+
+/**
+ * v4l2_i2c_new_subdev_board - Load an i2c module and return an initialized
+ *	&struct v4l2_subdev.
+ *
+ * @v4l2_dev: pointer to &struct v4l2_device
+ * @adapter: pointer to struct i2c_adapter
+ * @info: pointer to struct i2c_board_info used to replace the irq,
+ *	 platform_data and addr arguments.
+ * @probe_addrs: array with a list of address. The last entry at such
+ *	array should be %I2C_CLIENT_END.
+ *
+ * returns a &struct v4l2_subdev pointer.
+ */
+struct v4l2_subdev *v4l2_i2c_new_subdev_board(struct v4l2_device *v4l2_dev,
+		struct i2c_adapter *adapter, struct i2c_board_info *info,
+		const unsigned short *probe_addrs);
+
+/**
+ * v4l2_i2c_subdev_init - Initializes a &struct v4l2_subdev with data from
+ *	an i2c_client struct.
+ *
+ * @sd: pointer to &struct v4l2_subdev
+ * @client: pointer to struct i2c_client
+ * @ops: pointer to &struct v4l2_subdev_ops
+ */
+void v4l2_i2c_subdev_init(struct v4l2_subdev *sd, struct i2c_client *client,
+		const struct v4l2_subdev_ops *ops);
+
+/**
+ * v4l2_i2c_subdev_addr - returns i2c client address of &struct v4l2_subdev.
+ *
+ * @sd: pointer to &struct v4l2_subdev
+ *
+ * Returns the address of an I2C sub-device
+ */
+unsigned short v4l2_i2c_subdev_addr(struct v4l2_subdev *sd);
+
+/**
+ * enum v4l2_i2c_tuner_type - specifies the range of tuner address that
+ *	should be used when seeking for I2C devices.
+ *
+ * @ADDRS_RADIO:		Radio tuner addresses.
+ *				Represent the following I2C addresses:
+ *				0x10 (if compiled with tea5761 support)
+ *				and 0x60.
+ * @ADDRS_DEMOD:		Demod tuner addresses.
+ *				Represent the following I2C addresses:
+ *				0x42, 0x43, 0x4a and 0x4b.
+ * @ADDRS_TV:			TV tuner addresses.
+ *				Represent the following I2C addresses:
+ *				0x42, 0x43, 0x4a, 0x4b, 0x60, 0x61, 0x62,
+ *				0x63 and 0x64.
+ * @ADDRS_TV_WITH_DEMOD:	TV tuner addresses if demod is present, this
+ *				excludes addresses used by the demodulator
+ *				from the list of candidates.
+ *				Represent the following I2C addresses:
+ *				0x60, 0x61, 0x62, 0x63 and 0x64.
+ *
+ * NOTE: All I2C addresses above use the 7-bit notation.
+ */
+enum v4l2_i2c_tuner_type {
+	ADDRS_RADIO,
+	ADDRS_DEMOD,
+	ADDRS_TV,
+	ADDRS_TV_WITH_DEMOD,
+};
+/**
+ * v4l2_i2c_tuner_addrs - Return a list of I2C tuner addresses to probe.
+ *
+ * @type: type of the tuner to seek, as defined by
+ *	  &enum v4l2_i2c_tuner_type.
+ *
+ * NOTE: Use only if the tuner addresses are unknown.
+ */
+const unsigned short *v4l2_i2c_tuner_addrs(enum v4l2_i2c_tuner_type type);
+
+/* ------------------------------------------------------------------------- */
+
+/* SPI Helper functions */
+#if defined(CONFIG_SPI)
+
+#include <linux/spi/spi.h>
+
+struct spi_device;
+
+/**
+ *  v4l2_spi_new_subdev - Load an spi module and return an initialized
+ *	&struct v4l2_subdev.
+ *
+ *
+ * @v4l2_dev: pointer to &struct v4l2_device.
+ * @master: pointer to struct spi_master.
+ * @info: pointer to struct spi_board_info.
+ *
+ * returns a &struct v4l2_subdev pointer.
+ */
+struct v4l2_subdev *v4l2_spi_new_subdev(struct v4l2_device *v4l2_dev,
+		struct spi_master *master, struct spi_board_info *info);
+
+/**
+ * v4l2_spi_subdev_init - Initialize a v4l2_subdev with data from an
+ *	spi_device struct.
+ *
+ * @sd: pointer to &struct v4l2_subdev
+ * @spi: pointer to struct spi_device.
+ * @ops: pointer to &struct v4l2_subdev_ops
+ */
+void v4l2_spi_subdev_init(struct v4l2_subdev *sd, struct spi_device *spi,
+		const struct v4l2_subdev_ops *ops);
+#endif
+
+/* ------------------------------------------------------------------------- */
+
+/*
+ * FIXME: these remaining ioctls/structs should be removed as well, but they
+ * are still used in tuner-simple.c (TUNER_SET_CONFIG) and cx18/ivtv (RESET).
+ * To remove these ioctls some more cleanup is needed in those modules.
+ *
+ * It doesn't make much sense on documenting them, as what we really want is
+ * to get rid of them.
+ */
+
+/* s_config */
+struct v4l2_priv_tun_config {
+	int tuner;
+	void *priv;
+};
+#define TUNER_SET_CONFIG           _IOW('d', 92, struct v4l2_priv_tun_config)
+
+#define VIDIOC_INT_RESET		_IOW ('d', 102, u32)
+
+/* ------------------------------------------------------------------------- */
+
+/* Miscellaneous helper functions */
+
+/**
+ * v4l_bound_align_image - adjust video dimensions according to
+ *	a given constraints.
+ *
+ * @width:	pointer to width that will be adjusted if needed.
+ * @wmin:	minimum width.
+ * @wmax:	maximum width.
+ * @walign:	least significant bit on width.
+ * @height:	pointer to height that will be adjusted if needed.
+ * @hmin:	minimum height.
+ * @hmax:	maximum height.
+ * @halign:	least significant bit on width.
+ * @salign:	least significant bit for the image size (e. g.
+ *		:math:`width * height`).
+ *
+ * Clip an image to have @width between @wmin and @wmax, and @height between
+ * @hmin and @hmax, inclusive.
+ *
+ * Additionally, the @width will be a multiple of :math:`2^{walign}`,
+ * the @height will be a multiple of :math:`2^{halign}`, and the overall
+ * size :math:`width * height` will be a multiple of :math:`2^{salign}`.
+ *
+ * .. note::
+ *
+ *    #. The clipping rectangle may be shrunk or enlarged to fit the alignment
+ *       constraints.
+ *    #. @wmax must not be smaller than @wmin.
+ *    #. @hmax must not be smaller than @hmin.
+ *    #. The alignments must not be so high there are no possible image
+ *       sizes within the allowed bounds.
+ *    #. @wmin and @hmin must be at least 1 (don't use 0).
+ *    #. For @walign, @halign and @salign, if you don't care about a certain
+ *       alignment, specify ``0``, as :math:`2^0 = 1` and one byte alignment
+ *       is equivalent to no alignment.
+ *    #. If you only want to adjust downward, specify a maximum that's the
+ *       same as the initial value.
+ */
+void v4l_bound_align_image(unsigned int *width, unsigned int wmin,
+			   unsigned int wmax, unsigned int walign,
+			   unsigned int *height, unsigned int hmin,
+			   unsigned int hmax, unsigned int halign,
+			   unsigned int salign);
+
+/**
+ * v4l2_find_nearest_size - Find the nearest size among a discrete
+ *	set of resolutions contained in an array of a driver specific struct.
+ *
+ * @array: a driver specific array of image sizes
+ * @array_size: the length of the driver specific array of image sizes
+ * @width_field: the name of the width field in the driver specific struct
+ * @height_field: the name of the height field in the driver specific struct
+ * @width: desired width.
+ * @height: desired height.
+ *
+ * Finds the closest resolution to minimize the width and height differences
+ * between what requested and the supported resolutions. The size of the width
+ * and height fields in the driver specific must equal to that of u32, i.e. four
+ * bytes.
+ *
+ * Returns the best match or NULL if the length of the array is zero.
+ */
+#define v4l2_find_nearest_size(array, array_size, width_field, height_field, \
+			       width, height)				\
+	({								\
+		BUILD_BUG_ON(sizeof((array)->width_field) != sizeof(u32) || \
+			     sizeof((array)->height_field) != sizeof(u32)); \
+		(typeof(&(array)[0]))__v4l2_find_nearest_size(		\
+			(array), array_size, sizeof(*(array)),		\
+			offsetof(typeof(*(array)), width_field),	\
+			offsetof(typeof(*(array)), height_field),	\
+			width, height);					\
+	})
+const void *
+__v4l2_find_nearest_size(const void *array, size_t array_size,
+			 size_t entry_size, size_t width_offset,
+			 size_t height_offset, s32 width, s32 height);
+
+/**
+ * v4l2_get_timestamp - helper routine to get a timestamp to be used when
+ *	filling streaming metadata. Internally, it uses ktime_get_ts(),
+ *	which is the recommended way to get it.
+ *
+ * @tv: pointer to &struct timeval to be filled.
+ */
+void v4l2_get_timestamp(struct timeval *tv);
+
+/**
+ * v4l2_g_parm_cap - helper routine for vidioc_g_parm to fill this in by
+ *      calling the g_frame_interval op of the given subdev. It only works
+ *      for V4L2_BUF_TYPE_VIDEO_CAPTURE(_MPLANE), hence the _cap in the
+ *      function name.
+ *
+ * @vdev: the struct video_device pointer. Used to determine the device caps.
+ * @sd: the sub-device pointer.
+ * @a: the VIDIOC_G_PARM argument.
+ */
+int v4l2_g_parm_cap(struct video_device *vdev,
+		    struct v4l2_subdev *sd, struct v4l2_streamparm *a);
+
+/**
+ * v4l2_s_parm_cap - helper routine for vidioc_s_parm to fill this in by
+ *      calling the s_frame_interval op of the given subdev. It only works
+ *      for V4L2_BUF_TYPE_VIDEO_CAPTURE(_MPLANE), hence the _cap in the
+ *      function name.
+ *
+ * @vdev: the struct video_device pointer. Used to determine the device caps.
+ * @sd: the sub-device pointer.
+ * @a: the VIDIOC_S_PARM argument.
+ */
+int v4l2_s_parm_cap(struct video_device *vdev,
+		    struct v4l2_subdev *sd, struct v4l2_streamparm *a);
+
+#endif /* V4L2_COMMON_H_ */