Adding upstream version 4.19.249.upstream/4.19.249upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 682 insertions, 0 deletions

diff --git a/scripts/kconfig/streamline_config.pl b/scripts/kconfig/streamline_config.pl
new file mode 100755
index 000000000..4686531e2
--- /dev/null
+++ b/scripts/kconfig/streamline_config.pl
@@ -0,0 +1,682 @@
+#!/usr/bin/env perl
+#
+# Copyright 2005-2009 - Steven Rostedt
+# Licensed under the terms of the GNU GPL License version 2
+#
+#  It's simple enough to figure out how this works.
+#  If not, then you can ask me at stripconfig@goodmis.org
+#
+# What it does?
+#
+#   If you have installed a Linux kernel from a distribution
+#   that turns on way too many modules than you need, and
+#   you only want the modules you use, then this program
+#   is perfect for you.
+#
+#   It gives you the ability to turn off all the modules that are
+#   not loaded on your system.
+#
+# Howto:
+#
+#  1. Boot up the kernel that you want to stream line the config on.
+#  2. Change directory to the directory holding the source of the
+#       kernel that you just booted.
+#  3. Copy the configuraton file to this directory as .config
+#  4. Have all your devices that you need modules for connected and
+#      operational (make sure that their corresponding modules are loaded)
+#  5. Run this script redirecting the output to some other file
+#       like config_strip.
+#  6. Back up your old config (if you want too).
+#  7. copy the config_strip file to .config
+#  8. Run "make oldconfig"
+#
+#  Now your kernel is ready to be built with only the modules that
+#  are loaded.
+#
+# Here's what I did with my Debian distribution.
+#
+#    cd /usr/src/linux-2.6.10
+#    cp /boot/config-2.6.10-1-686-smp .config
+#    ~/bin/streamline_config > config_strip
+#    mv .config config_sav
+#    mv config_strip .config
+#    make oldconfig
+#
+use warnings;
+use strict;
+use Getopt::Long;
+
+# set the environment variable LOCALMODCONFIG_DEBUG to get
+# debug output.
+my $debugprint = 0;
+$debugprint = 1 if (defined($ENV{LOCALMODCONFIG_DEBUG}));
+
+sub dprint {
+    return if (!$debugprint);
+    print STDERR @_;
+}
+
+my $config = ".config";
+
+my $uname = `uname -r`;
+chomp $uname;
+
+my @searchconfigs = (
+	{
+	    "file" => ".config",
+	    "exec" => "cat",
+	},
+	{
+	    "file" => "/proc/config.gz",
+	    "exec" => "zcat",
+	},
+	{
+	    "file" => "/boot/config-$uname",
+	    "exec" => "cat",
+	},
+	{
+	    "file" => "/boot/vmlinuz-$uname",
+	    "exec" => "scripts/extract-ikconfig",
+	    "test" => "scripts/extract-ikconfig",
+	},
+	{
+	    "file" => "vmlinux",
+	    "exec" => "scripts/extract-ikconfig",
+	    "test" => "scripts/extract-ikconfig",
+	},
+	{
+	    "file" => "/lib/modules/$uname/kernel/kernel/configs.ko",
+	    "exec" => "scripts/extract-ikconfig",
+	    "test" => "scripts/extract-ikconfig",
+	},
+	{
+	    "file" => "kernel/configs.ko",
+	    "exec" => "scripts/extract-ikconfig",
+	    "test" => "scripts/extract-ikconfig",
+	},
+	{
+	    "file" => "kernel/configs.o",
+	    "exec" => "scripts/extract-ikconfig",
+	    "test" => "scripts/extract-ikconfig",
+	},
+);
+
+sub read_config {
+    foreach my $conf (@searchconfigs) {
+	my $file = $conf->{"file"};
+
+	next if ( ! -f "$file");
+
+	if (defined($conf->{"test"})) {
+	    `$conf->{"test"} $conf->{"file"} 2>/dev/null`;
+	    next if ($?);
+	}
+
+	my $exec = $conf->{"exec"};
+
+	print STDERR "using config: '$file'\n";
+
+	open(my $infile, '-|', "$exec $file") || die "Failed to run $exec $file";
+	my @x = <$infile>;
+	close $infile;
+	return @x;
+    }
+    die "No config file found";
+}
+
+my @config_file = read_config;
+
+# Parse options
+my $localmodconfig = 0;
+my $localyesconfig = 0;
+
+GetOptions("localmodconfig" => \$localmodconfig,
+	   "localyesconfig" => \$localyesconfig);
+
+# Get the build source and top level Kconfig file (passed in)
+my $ksource = ($ARGV[0] ? $ARGV[0] : '.');
+my $kconfig = $ARGV[1];
+my $lsmod_file = $ENV{'LSMOD'};
+
+my @makefiles = `find $ksource -name Makefile -or -name Kbuild 2>/dev/null`;
+chomp @makefiles;
+
+my %depends;
+my %selects;
+my %prompts;
+my %objects;
+my $var;
+my $iflevel = 0;
+my @ifdeps;
+
+# prevent recursion
+my %read_kconfigs;
+
+sub read_kconfig {
+    my ($kconfig) = @_;
+
+    my $state = "NONE";
+    my $config;
+
+    my $cont = 0;
+    my $line;
+
+    my $source = "$ksource/$kconfig";
+    my $last_source = "";
+
+    # Check for any environment variables used
+    while ($source =~ /\$\((\w+)\)/ && $last_source ne $source) {
+	my $env = $1;
+	$last_source = $source;
+	$source =~ s/\$\($env\)/$ENV{$env}/;
+    }
+
+    open(my $kinfile, '<', $source) || die "Can't open $kconfig";
+    while (<$kinfile>) {
+	chomp;
+
+	# Make sure that lines ending with \ continue
+	if ($cont) {
+	    $_ = $line . " " . $_;
+	}
+
+	if (s/\\$//) {
+	    $cont = 1;
+	    $line = $_;
+	    next;
+	}
+
+	$cont = 0;
+
+	# collect any Kconfig sources
+	if (/^source\s+"?([^"]+)/) {
+	    my $kconfig = $1;
+	    # prevent reading twice.
+	    if (!defined($read_kconfigs{$kconfig})) {
+		$read_kconfigs{$kconfig} = 1;
+		read_kconfig($kconfig);
+	    }
+	    next;
+	}
+
+	# configs found
+	if (/^\s*(menu)?config\s+(\S+)\s*$/) {
+	    $state = "NEW";
+	    $config = $2;
+
+	    # Add depends for 'if' nesting
+	    for (my $i = 0; $i < $iflevel; $i++) {
+		if ($i) {
+		    $depends{$config} .= " " . $ifdeps[$i];
+		} else {
+		    $depends{$config} = $ifdeps[$i];
+		}
+		$state = "DEP";
+	    }
+
+	# collect the depends for the config
+	} elsif ($state eq "NEW" && /^\s*depends\s+on\s+(.*)$/) {
+	    $state = "DEP";
+	    $depends{$config} = $1;
+	} elsif ($state eq "DEP" && /^\s*depends\s+on\s+(.*)$/) {
+	    $depends{$config} .= " " . $1;
+	} elsif ($state eq "DEP" && /^\s*def(_(bool|tristate)|ault)\s+(\S.*)$/) {
+	    my $dep = $3;
+	    if ($dep !~ /^\s*(y|m|n)\s*$/) {
+		$dep =~ s/.*\sif\s+//;
+		$depends{$config} .= " " . $dep;
+		dprint "Added default depends $dep to $config\n";
+	    }
+
+	# Get the configs that select this config
+	} elsif ($state ne "NONE" && /^\s*select\s+(\S+)/) {
+	    my $conf = $1;
+	    if (defined($selects{$conf})) {
+		$selects{$conf} .= " " . $config;
+	    } else {
+		$selects{$conf} = $config;
+	    }
+
+	# configs without prompts must be selected
+	} elsif ($state ne "NONE" && /^\s*(tristate\s+\S|prompt\b)/) {
+	    # note if the config has a prompt
+	    $prompts{$config} = 1;
+
+	# Check for if statements
+	} elsif (/^if\s+(.*\S)\s*$/) {
+	    my $deps = $1;
+	    # remove beginning and ending non text
+	    $deps =~ s/^[^a-zA-Z0-9_]*//;
+	    $deps =~ s/[^a-zA-Z0-9_]*$//;
+
+	    my @deps = split /[^a-zA-Z0-9_]+/, $deps;
+
+	    $ifdeps[$iflevel++] = join ':', @deps;
+
+	} elsif (/^endif/) {
+
+	    $iflevel-- if ($iflevel);
+
+	# stop on "help" and keywords that end a menu entry
+	} elsif (/^\s*(---)?help(---)?\s*$/ || /^(comment|choice|menu)\b/) {
+	    $state = "NONE";
+	}
+    }
+    close($kinfile);
+}
+
+if ($kconfig) {
+    read_kconfig($kconfig);
+}
+
+# Makefiles can use variables to define their dependencies
+sub convert_vars {
+    my ($line, %vars) = @_;
+
+    my $process = "";
+
+    while ($line =~ s/^(.*?)(\$\((.*?)\))//) {
+	my $start = $1;
+	my $variable = $2;
+	my $var = $3;
+
+	if (defined($vars{$var})) {
+	    $process .= $start . $vars{$var};
+	} else {
+	    $process .= $start . $variable;
+	}
+    }
+
+    $process .= $line;
+
+    return $process;
+}
+
+# Read all Makefiles to map the configs to the objects
+foreach my $makefile (@makefiles) {
+
+    my $line = "";
+    my %make_vars;
+
+    open(my $infile, '<', $makefile) || die "Can't open $makefile";
+    while (<$infile>) {
+	# if this line ends with a backslash, continue
+	chomp;
+	if (/^(.*)\\$/) {
+	    $line .= $1;
+	    next;
+	}
+
+	$line .= $_;
+	$_ = $line;
+	$line = "";
+
+	my $objs;
+
+	# Convert variables in a line (could define configs)
+	$_ = convert_vars($_, %make_vars);
+
+	# collect objects after obj-$(CONFIG_FOO_BAR)
+	if (/obj-\$\((CONFIG_[^\)]*)\)\s*[+:]?=\s*(.*)/) {
+	    $var = $1;
+	    $objs = $2;
+
+	# check if variables are set
+	} elsif (/^\s*(\S+)\s*[:]?=\s*(.*\S)/) {
+	    $make_vars{$1} = $2;
+	}
+	if (defined($objs)) {
+	    foreach my $obj (split /\s+/,$objs) {
+		$obj =~ s/-/_/g;
+		if ($obj =~ /(.*)\.o$/) {
+		    # Objects may be enabled by more than one config.
+		    # Store configs in an array.
+		    my @arr;
+
+		    if (defined($objects{$1})) {
+			@arr = @{$objects{$1}};
+		    }
+
+		    $arr[$#arr+1] = $var;
+
+		    # The objects have a hash mapping to a reference
+		    # of an array of configs.
+		    $objects{$1} = \@arr;
+		}
+	    }
+	}
+    }
+    close($infile);
+}
+
+my %modules;
+my $linfile;
+
+if (defined($lsmod_file)) {
+    if ( ! -f $lsmod_file) {
+	if ( -f $ENV{'objtree'}."/".$lsmod_file) {
+	    $lsmod_file = $ENV{'objtree'}."/".$lsmod_file;
+	} else {
+		die "$lsmod_file not found";
+	}
+    }
+
+    my $otype = ( -x $lsmod_file) ? '-|' : '<';
+    open($linfile, $otype, $lsmod_file);
+
+} else {
+
+    # see what modules are loaded on this system
+    my $lsmod;
+
+    foreach my $dir ( ("/sbin", "/bin", "/usr/sbin", "/usr/bin") ) {
+	if ( -x "$dir/lsmod" ) {
+	    $lsmod = "$dir/lsmod";
+	    last;
+	}
+}
+    if (!defined($lsmod)) {
+	# try just the path
+	$lsmod = "lsmod";
+    }
+
+    open($linfile, '-|', $lsmod) || die "Can not call lsmod with $lsmod";
+}
+
+while (<$linfile>) {
+	next if (/^Module/);  # Skip the first line.
+	if (/^(\S+)/) {
+		$modules{$1} = 1;
+	}
+}
+close ($linfile);
+
+# add to the configs hash all configs that are needed to enable
+# a loaded module. This is a direct obj-${CONFIG_FOO} += bar.o
+# where we know we need bar.o so we add FOO to the list.
+my %configs;
+foreach my $module (keys(%modules)) {
+    if (defined($objects{$module})) {
+	my @arr = @{$objects{$module}};
+	foreach my $conf (@arr) {
+	    $configs{$conf} = $module;
+	    dprint "$conf added by direct ($module)\n";
+	    if ($debugprint) {
+		my $c=$conf;
+		$c =~ s/^CONFIG_//;
+		if (defined($depends{$c})) {
+		    dprint " deps = $depends{$c}\n";
+		} else {
+		    dprint " no deps\n";
+		}
+	    }
+	}
+    } else {
+	# Most likely, someone has a custom (binary?) module loaded.
+	print STDERR "$module config not found!!\n";
+    }
+}
+
+# Read the current config, and see what is enabled. We want to
+# ignore configs that we would not enable anyway.
+
+my %orig_configs;
+my $valid = "A-Za-z_0-9";
+
+foreach my $line (@config_file) {
+    $_ = $line;
+
+    if (/(CONFIG_[$valid]*)=(m|y)/) {
+	$orig_configs{$1} = $2;
+    }
+}
+
+my $repeat = 1;
+
+my $depconfig;
+
+#
+# Note, we do not care about operands (like: &&, ||, !) we want to add any
+# config that is in the depend list of another config. This script does
+# not enable configs that are not already enabled. If we come across a
+# config A that depends on !B, we can still add B to the list of depends
+# to keep on. If A was on in the original config, B would not have been
+# and B would not be turned on by this script.
+#
+sub parse_config_depends
+{
+    my ($p) = @_;
+
+    while ($p =~ /[$valid]/) {
+
+	if ($p =~ /^[^$valid]*([$valid]+)/) {
+	    my $conf = "CONFIG_" . $1;
+
+	    $p =~ s/^[^$valid]*[$valid]+//;
+
+	    # We only need to process if the depend config is a module
+	    if (!defined($orig_configs{$conf}) || $orig_configs{$conf} eq "y") {
+		next;
+	    }
+
+	    if (!defined($configs{$conf})) {
+		# We must make sure that this config has its
+		# dependencies met.
+		$repeat = 1; # do again
+		dprint "$conf selected by depend $depconfig\n";
+		$configs{$conf} = 1;
+	    }
+	} else {
+	    die "this should never happen";
+	}
+    }
+}
+
+# Select is treated a bit differently than depends. We call this
+# when a config has no prompt and requires another config to be
+# selected. We use to just select all configs that selected this
+# config, but found that that can balloon into enabling hundreds
+# of configs that we do not care about.
+#
+# The idea is we look at all the configs that select it. If one
+# is already in our list of configs to enable, then there's nothing
+# else to do. If there isn't, we pick the first config that was
+# enabled in the orignal config and use that.
+sub parse_config_selects
+{
+    my ($config, $p) = @_;
+
+    my $next_config;
+
+    while ($p =~ /[$valid]/) {
+
+	if ($p =~ /^[^$valid]*([$valid]+)/) {
+	    my $conf = "CONFIG_" . $1;
+
+	    $p =~ s/^[^$valid]*[$valid]+//;
+
+	    # Make sure that this config exists in the current .config file
+	    if (!defined($orig_configs{$conf})) {
+		dprint "$conf not set for $config select\n";
+		next;
+	    }
+
+	    # Check if something other than a module selects this config
+	    if (defined($orig_configs{$conf}) && $orig_configs{$conf} ne "m") {
+		dprint "$conf (non module) selects config, we are good\n";
+		# we are good with this
+		return;
+	    }
+	    if (defined($configs{$conf})) {
+		dprint "$conf selects $config so we are good\n";
+		# A set config selects this config, we are good
+		return;
+	    }
+	    # Set this config to be selected
+	    if (!defined($next_config)) {
+		$next_config = $conf;
+	    }
+	} else {
+	    die "this should never happen";
+	}
+    }
+
+    # If no possible config selected this, then something happened.
+    if (!defined($next_config)) {
+	print STDERR "WARNING: $config is required, but nothing in the\n";
+	print STDERR "  current config selects it.\n";
+	return;
+    }
+
+    # If we are here, then we found no config that is set and
+    # selects this config. Repeat.
+    $repeat = 1;
+    # Make this config need to be selected
+    $configs{$next_config} = 1;
+    dprint "$next_config selected by select $config\n";
+}
+
+my %process_selects;
+
+# loop through all configs, select their dependencies.
+sub loop_depend {
+    $repeat = 1;
+
+    while ($repeat) {
+	$repeat = 0;
+
+      forloop:
+	foreach my $config (keys %configs) {
+
+	    # If this config is not a module, we do not need to process it
+	    if (defined($orig_configs{$config}) && $orig_configs{$config} ne "m") {
+		next forloop;
+	    }
+
+	    $config =~ s/^CONFIG_//;
+	    $depconfig = $config;
+
+	    if (defined($depends{$config})) {
+		# This config has dependencies. Make sure they are also included
+		parse_config_depends $depends{$config};
+	    }
+
+	    # If the config has no prompt, then we need to check if a config
+	    # that is enabled selected it. Or if we need to enable one.
+	    if (!defined($prompts{$config}) && defined($selects{$config})) {
+		$process_selects{$config} = 1;
+	    }
+	}
+    }
+}
+
+sub loop_select {
+
+    foreach my $config (keys %process_selects) {
+	$config =~ s/^CONFIG_//;
+
+	dprint "Process select $config\n";
+
+	# config has no prompt and must be selected.
+	parse_config_selects $config, $selects{$config};
+    }
+}
+
+while ($repeat) {
+    # Get the first set of configs and their dependencies.
+    loop_depend;
+
+    $repeat = 0;
+
+    # Now we need to see if we have to check selects;
+    loop_select;
+}
+
+my %setconfigs;
+
+# Finally, read the .config file and turn off any module enabled that
+# we could not find a reason to keep enabled.
+foreach my $line (@config_file) {
+    $_ = $line;
+
+    if (/CONFIG_IKCONFIG/) {
+	if (/# CONFIG_IKCONFIG is not set/) {
+	    # enable IKCONFIG at least as a module
+	    print "CONFIG_IKCONFIG=m\n";
+	    # don't ask about PROC
+	    print "# CONFIG_IKCONFIG_PROC is not set\n";
+	} else {
+	    print;
+	}
+	next;
+    }
+
+    if (/CONFIG_MODULE_SIG_KEY="(.+)"/) {
+        my $orig_cert = $1;
+        my $default_cert = "certs/signing_key.pem";
+
+        # Check that the logic in this script still matches the one in Kconfig
+        if (!defined($depends{"MODULE_SIG_KEY"}) ||
+            $depends{"MODULE_SIG_KEY"} !~ /"\Q$default_cert\E"/) {
+            print STDERR "WARNING: MODULE_SIG_KEY assertion failure, ",
+                "update needed to ", __FILE__, " line ", __LINE__, "\n";
+            print;
+        } elsif ($orig_cert ne $default_cert && ! -f $orig_cert) {
+            print STDERR "Module signature verification enabled but ",
+                "module signing key \"$orig_cert\" not found. Resetting ",
+                "signing key to default value.\n";
+            print "CONFIG_MODULE_SIG_KEY=\"$default_cert\"\n";
+        } else {
+            print;
+        }
+        next;
+    }
+
+    if (/CONFIG_SYSTEM_TRUSTED_KEYS="(.+)"/) {
+        my $orig_keys = $1;
+
+        if (! -f $orig_keys) {
+            print STDERR "System keyring enabled but keys \"$orig_keys\" ",
+                "not found. Resetting keys to default value.\n";
+            print "CONFIG_SYSTEM_TRUSTED_KEYS=\"\"\n";
+        } else {
+            print;
+        }
+        next;
+    }
+
+    if (/^(CONFIG.*)=(m|y)/) {
+	if (defined($configs{$1})) {
+	    if ($localyesconfig) {
+	        $setconfigs{$1} = 'y';
+		print "$1=y\n";
+		next;
+	    } else {
+	        $setconfigs{$1} = $2;
+	    }
+	} elsif ($2 eq "m") {
+	    print "# $1 is not set\n";
+	    next;
+	}
+    }
+    print;
+}
+
+# Integrity check, make sure all modules that we want enabled do
+# indeed have their configs set.
+loop:
+foreach my $module (keys(%modules)) {
+    if (defined($objects{$module})) {
+	my @arr = @{$objects{$module}};
+	foreach my $conf (@arr) {
+	    if (defined($setconfigs{$conf})) {
+		next loop;
+	    }
+	}
+	print STDERR "module $module did not have configs";
+	foreach my $conf (@arr) {
+	    print STDERR " " , $conf;
+	}
+	print STDERR "\n";
+    }
+}