Adding upstream version 4.19.249.upstream/4.19.249upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 332 insertions, 0 deletions

diff --git a/tools/testing/selftests/firmware/fw_filesystem.sh b/tools/testing/selftests/firmware/fw_filesystem.sh
new file mode 100755
index 000000000..a4320c4b4
--- /dev/null
+++ b/tools/testing/selftests/firmware/fw_filesystem.sh
@@ -0,0 +1,332 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+# This validates that the kernel will load firmware out of its list of
+# firmware locations on disk. Since the user helper does similar work,
+# we reset the custom load directory to a location the user helper doesn't
+# know so we can be sure we're not accidentally testing the user helper.
+set -e
+
+TEST_REQS_FW_SYSFS_FALLBACK="no"
+TEST_REQS_FW_SET_CUSTOM_PATH="yes"
+TEST_DIR=$(dirname $0)
+source $TEST_DIR/fw_lib.sh
+
+check_mods
+check_setup
+verify_reqs
+setup_tmp_file
+
+trap "test_finish" EXIT
+
+if [ "$HAS_FW_LOADER_USER_HELPER" = "yes" ]; then
+	# Turn down the timeout so failures don't take so long.
+	echo 1 >/sys/class/firmware/timeout
+fi
+
+if printf '\000' >"$DIR"/trigger_request 2> /dev/null; then
+	echo "$0: empty filename should not succeed" >&2
+	exit 1
+fi
+
+if [ ! -e "$DIR"/trigger_async_request ]; then
+	echo "$0: empty filename: async trigger not present, ignoring test" >&2
+	exit $ksft_skip
+else
+	if printf '\000' >"$DIR"/trigger_async_request 2> /dev/null; then
+		echo "$0: empty filename should not succeed (async)" >&2
+		exit 1
+	fi
+fi
+
+# Request a firmware that doesn't exist, it should fail.
+if echo -n "nope-$NAME" >"$DIR"/trigger_request 2> /dev/null; then
+	echo "$0: firmware shouldn't have loaded" >&2
+	exit 1
+fi
+if diff -q "$FW" /dev/test_firmware >/dev/null ; then
+	echo "$0: firmware was not expected to match" >&2
+	exit 1
+else
+	if [ "$HAS_FW_LOADER_USER_HELPER" = "yes" ]; then
+		echo "$0: timeout works"
+	fi
+fi
+
+# This should succeed via kernel load or will fail after 1 second after
+# being handed over to the user helper, which won't find the fw either.
+if ! echo -n "$NAME" >"$DIR"/trigger_request ; then
+	echo "$0: could not trigger request" >&2
+	exit 1
+fi
+
+# Verify the contents are what we expect.
+if ! diff -q "$FW" /dev/test_firmware >/dev/null ; then
+	echo "$0: firmware was not loaded" >&2
+	exit 1
+else
+	echo "$0: filesystem loading works"
+fi
+
+# Try the asynchronous version too
+if [ ! -e "$DIR"/trigger_async_request ]; then
+	echo "$0: firmware loading: async trigger not present, ignoring test" >&2
+	exit $ksft_skip
+else
+	if ! echo -n "$NAME" >"$DIR"/trigger_async_request ; then
+		echo "$0: could not trigger async request" >&2
+		exit 1
+	fi
+
+	# Verify the contents are what we expect.
+	if ! diff -q "$FW" /dev/test_firmware >/dev/null ; then
+		echo "$0: firmware was not loaded (async)" >&2
+		exit 1
+	else
+		echo "$0: async filesystem loading works"
+	fi
+fi
+
+### Batched requests tests
+test_config_present()
+{
+	if [ ! -f $DIR/reset ]; then
+		echo "Configuration triggers not present, ignoring test"
+		exit $ksft_skip
+	fi
+}
+
+# Defaults :
+#
+# send_uevent: 1
+# sync_direct: 0
+# name: test-firmware.bin
+# num_requests: 4
+config_reset()
+{
+	echo 1 >  $DIR/reset
+}
+
+release_all_firmware()
+{
+	echo 1 >  $DIR/release_all_firmware
+}
+
+config_set_name()
+{
+	echo -n $1 >  $DIR/config_name
+}
+
+config_set_sync_direct()
+{
+	echo 1 >  $DIR/config_sync_direct
+}
+
+config_unset_sync_direct()
+{
+	echo 0 >  $DIR/config_sync_direct
+}
+
+config_set_uevent()
+{
+	echo 1 >  $DIR/config_send_uevent
+}
+
+config_unset_uevent()
+{
+	echo 0 >  $DIR/config_send_uevent
+}
+
+config_trigger_sync()
+{
+	echo -n 1 > $DIR/trigger_batched_requests 2>/dev/null
+}
+
+config_trigger_async()
+{
+	echo -n 1 > $DIR/trigger_batched_requests_async 2> /dev/null
+}
+
+config_set_read_fw_idx()
+{
+	echo -n $1 > $DIR/config_read_fw_idx 2> /dev/null
+}
+
+read_firmwares()
+{
+	for i in $(seq 0 3); do
+		config_set_read_fw_idx $i
+		# Verify the contents are what we expect.
+		# -Z required for now -- check for yourself, md5sum
+		# on $FW and DIR/read_firmware will yield the same. Even
+		# cmp agrees, so something is off.
+		if ! diff -q -Z "$FW" $DIR/read_firmware 2>/dev/null ; then
+			echo "request #$i: firmware was not loaded" >&2
+			exit 1
+		fi
+	done
+}
+
+read_firmwares_expect_nofile()
+{
+	for i in $(seq 0 3); do
+		config_set_read_fw_idx $i
+		# Ensures contents differ
+		if diff -q -Z "$FW" $DIR/read_firmware 2>/dev/null ; then
+			echo "request $i: file was not expected to match" >&2
+			exit 1
+		fi
+	done
+}
+
+test_batched_request_firmware_nofile()
+{
+	echo -n "Batched request_firmware() nofile try #$1: "
+	config_reset
+	config_set_name nope-test-firmware.bin
+	config_trigger_sync
+	read_firmwares_expect_nofile
+	release_all_firmware
+	echo "OK"
+}
+
+test_batched_request_firmware_direct_nofile()
+{
+	echo -n "Batched request_firmware_direct() nofile try #$1: "
+	config_reset
+	config_set_name nope-test-firmware.bin
+	config_set_sync_direct
+	config_trigger_sync
+	release_all_firmware
+	echo "OK"
+}
+
+test_request_firmware_nowait_uevent_nofile()
+{
+	echo -n "Batched request_firmware_nowait(uevent=true) nofile try #$1: "
+	config_reset
+	config_set_name nope-test-firmware.bin
+	config_trigger_async
+	release_all_firmware
+	echo "OK"
+}
+
+test_wait_and_cancel_custom_load()
+{
+	if [ "$HAS_FW_LOADER_USER_HELPER" != "yes" ]; then
+		return
+	fi
+	local timeout=10
+	name=$1
+	while [ ! -e "$DIR"/"$name"/loading ]; do
+		sleep 0.1
+		timeout=$(( $timeout - 1 ))
+		if [ "$timeout" -eq 0 ]; then
+			echo "firmware interface never appeared:" >&2
+			echo "$DIR/$name/loading" >&2
+			exit 1
+		fi
+	done
+	echo -1 >"$DIR"/"$name"/loading
+}
+
+test_request_firmware_nowait_custom_nofile()
+{
+	echo -n "Batched request_firmware_nowait(uevent=false) nofile try #$1: "
+	config_reset
+	config_unset_uevent
+	RANDOM_FILE_PATH=$(setup_random_file_fake)
+	RANDOM_FILE="$(basename $RANDOM_FILE_PATH)"
+	config_set_name $RANDOM_FILE
+	config_trigger_async &
+	test_wait_and_cancel_custom_load $RANDOM_FILE
+	wait
+	release_all_firmware
+	echo "OK"
+}
+
+test_batched_request_firmware()
+{
+	echo -n "Batched request_firmware() try #$1: "
+	config_reset
+	config_trigger_sync
+	read_firmwares
+	release_all_firmware
+	echo "OK"
+}
+
+test_batched_request_firmware_direct()
+{
+	echo -n "Batched request_firmware_direct() try #$1: "
+	config_reset
+	config_set_sync_direct
+	config_trigger_sync
+	release_all_firmware
+	echo "OK"
+}
+
+test_request_firmware_nowait_uevent()
+{
+	echo -n "Batched request_firmware_nowait(uevent=true) try #$1: "
+	config_reset
+	config_trigger_async
+	release_all_firmware
+	echo "OK"
+}
+
+test_request_firmware_nowait_custom()
+{
+	echo -n "Batched request_firmware_nowait(uevent=false) try #$1: "
+	config_reset
+	config_unset_uevent
+	RANDOM_FILE_PATH=$(setup_random_file)
+	RANDOM_FILE="$(basename $RANDOM_FILE_PATH)"
+	config_set_name $RANDOM_FILE
+	config_trigger_async
+	release_all_firmware
+	echo "OK"
+}
+
+# Only continue if batched request triggers are present on the
+# test-firmware driver
+test_config_present
+
+# test with the file present
+echo
+echo "Testing with the file present..."
+for i in $(seq 1 5); do
+	test_batched_request_firmware $i
+done
+
+for i in $(seq 1 5); do
+	test_batched_request_firmware_direct $i
+done
+
+for i in $(seq 1 5); do
+	test_request_firmware_nowait_uevent $i
+done
+
+for i in $(seq 1 5); do
+	test_request_firmware_nowait_custom $i
+done
+
+# Test for file not found, errors are expected, the failure would be
+# a hung task, which would require a hard reset.
+echo
+echo "Testing with the file missing..."
+for i in $(seq 1 5); do
+	test_batched_request_firmware_nofile $i
+done
+
+for i in $(seq 1 5); do
+	test_batched_request_firmware_direct_nofile $i
+done
+
+for i in $(seq 1 5); do
+	test_request_firmware_nowait_uevent_nofile $i
+done
+
+for i in $(seq 1 5); do
+	test_request_firmware_nowait_custom_nofile $i
+done
+
+exit 0