diff options
Diffstat (limited to 'Documentation/devicetree/bindings/iio/adc/amlogic,meson-saradc.txt')
-rw-r--r-- | Documentation/devicetree/bindings/iio/adc/amlogic,meson-saradc.txt | 37 |
1 files changed, 37 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/iio/adc/amlogic,meson-saradc.txt b/Documentation/devicetree/bindings/iio/adc/amlogic,meson-saradc.txt new file mode 100644 index 000000000..54b823f3a --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/amlogic,meson-saradc.txt @@ -0,0 +1,37 @@ +* Amlogic Meson SAR (Successive Approximation Register) A/D converter + +Required properties: +- compatible: depending on the SoC this should be one of: + - "amlogic,meson8-saradc" for Meson8 + - "amlogic,meson8b-saradc" for Meson8b + - "amlogic,meson8m2-saradc" for Meson8m2 + - "amlogic,meson-gxbb-saradc" for GXBB + - "amlogic,meson-gxl-saradc" for GXL + - "amlogic,meson-gxm-saradc" for GXM + - "amlogic,meson-axg-saradc" for AXG + along with the generic "amlogic,meson-saradc" +- reg: the physical base address and length of the registers +- interrupts: the interrupt indicating end of sampling +- clocks: phandle and clock identifier (see clock-names) +- clock-names: mandatory clocks: + - "clkin" for the reference clock (typically XTAL) + - "core" for the SAR ADC core clock + optional clocks: + - "adc_clk" for the ADC (sampling) clock + - "adc_sel" for the ADC (sampling) clock mux +- vref-supply: the regulator supply for the ADC reference voltage +- #io-channel-cells: must be 1, see ../iio-bindings.txt + +Example: + saradc: adc@8680 { + compatible = "amlogic,meson-gxl-saradc", "amlogic,meson-saradc"; + #io-channel-cells = <1>; + reg = <0x0 0x8680 0x0 0x34>; + interrupts = <GIC_SPI 73 IRQ_TYPE_EDGE_RISING>; + clocks = <&xtal>, + <&clkc CLKID_SAR_ADC>, + <&clkc CLKID_SANA>, + <&clkc CLKID_SAR_ADC_CLK>, + <&clkc CLKID_SAR_ADC_SEL>; + clock-names = "clkin", "core", "sana", "adc_clk", "adc_sel"; + }; |