1 files changed, 99 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/mfd/qcom-pm8xxx.txt b/Documentation/devicetree/bindings/mfd/qcom-pm8xxx.txt
new file mode 100644
index 000000000..9e5eba4a4
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/qcom-pm8xxx.txt
@@ -0,0 +1,99 @@
+Qualcomm PM8xxx PMIC multi-function devices
+
+The PM8xxx family of Power Management ICs are used to provide regulated
+voltages and other various functionality to Qualcomm SoCs.
+
+= PROPERTIES
+
+- compatible:
+	Usage: required
+	Value type: <string>
+	Definition: must be one of:
+		    "qcom,pm8058"
+		    "qcom,pm8821"
+		    "qcom,pm8921"
+
+- #address-cells:
+	Usage: required
+	Value type: <u32>
+	Definition: must be 1
+
+- #size-cells:
+	Usage: required
+	Value type: <u32>
+	Definition: must be 0
+
+- interrupts:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: specifies the interrupt that indicates a subdevice
+		    has generated an interrupt (summary interrupt). The
+		    format of the specifier is defined by the binding document
+		    describing the node's interrupt parent.
+
+- #interrupt-cells:
+	Usage: required
+	Value type : <u32>
+	Definition: must be 2. Specifies the number of cells needed to encode
+		    an interrupt source. The 1st cell contains the interrupt
+		    number. The 2nd cell is the trigger type and level flags
+		    encoded as follows:
+
+			1 = low-to-high edge triggered
+			2 = high-to-low edge triggered
+			4 = active high level-sensitive
+			8 = active low level-sensitive
+
+- interrupt-controller:
+	Usage: required
+	Value type: <empty>
+	Definition: identifies this node as an interrupt controller
+
+= SUBCOMPONENTS
+
+The PMIC contains multiple independent functions, each described in a subnode.
+The below bindings specify the set of valid subnodes.
+
+== Real-Time Clock
+
+- compatible:
+	Usage: required
+	Value type: <string>
+	Definition: must be one of:
+		    "qcom,pm8058-rtc"
+		    "qcom,pm8921-rtc"
+		    "qcom,pm8941-rtc"
+		    "qcom,pm8018-rtc"
+
+- reg:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: single entry specifying the base address of the RTC registers
+
+- interrupts:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: single entry specifying the RTC's alarm interrupt
+
+- allow-set-time:
+	Usage: optional
+	Value type: <empty>
+	Definition: indicates that the setting of RTC time is allowed by
+		    the host CPU
+
+= EXAMPLE
+
+	pmicintc: pmic@0 {
+		compatible = "qcom,pm8921";
+		interrupts = <104 8>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		rtc@11d {
+			compatible = "qcom,pm8921-rtc";
+			reg = <0x11d>;
+			interrupts = <0x27 0>;
+		};
+	};