diff options
Diffstat (limited to 'Documentation/devicetree/bindings/spi/spi-rockchip.txt')
| -rw-r--r-- | Documentation/devicetree/bindings/spi/spi-rockchip.txt | 58 |
1 files changed, 58 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/spi/spi-rockchip.txt b/Documentation/devicetree/bindings/spi/spi-rockchip.txt new file mode 100644 index 000000000..a0edac12d --- /dev/null +++ b/Documentation/devicetree/bindings/spi/spi-rockchip.txt @@ -0,0 +1,58 @@ +* Rockchip SPI Controller + +The Rockchip SPI controller is used to interface with various devices such as flash +and display controllers using the SPI communication interface. + +Required Properties: + +- compatible: should be one of the following. + "rockchip,rv1108-spi" for rv1108 SoCs. + "rockchip,px30-spi", "rockchip,rk3066-spi" for px30 SoCs. + "rockchip,rk3036-spi" for rk3036 SoCS. + "rockchip,rk3066-spi" for rk3066 SoCs. + "rockchip,rk3188-spi" for rk3188 SoCs. + "rockchip,rk3228-spi" for rk3228 SoCS. + "rockchip,rk3288-spi" for rk3288 SoCs. + "rockchip,rk3368-spi" for rk3368 SoCs. + "rockchip,rk3399-spi" for rk3399 SoCs. +- reg: physical base address of the controller and length of memory mapped + region. +- interrupts: The interrupt number to the cpu. The interrupt specifier format + depends on the interrupt controller. +- clocks: Must contain an entry for each entry in clock-names. +- clock-names: Shall be "spiclk" for the transfer-clock, and "apb_pclk" for + the peripheral clock. +- #address-cells: should be 1. +- #size-cells: should be 0. + +Optional Properties: + +- dmas: DMA specifiers for tx and rx dma. See the DMA client binding, + Documentation/devicetree/bindings/dma/dma.txt +- dma-names: DMA request names should include "tx" and "rx" if present. +- rx-sample-delay-ns: nanoseconds to delay after the SCLK edge before sampling + Rx data (may need to be fine tuned for high capacitance lines). + No delay (0) by default. +- pinctrl-names: Names for the pin configuration(s); may be "default" or + "sleep", where the "sleep" configuration may describe the state + the pins should be in during system suspend. See also + pinctrl/pinctrl-bindings.txt. + + +Example: + + spi0: spi@ff110000 { + compatible = "rockchip,rk3066-spi"; + reg = <0xff110000 0x1000>; + dmas = <&pdma1 11>, <&pdma1 12>; + dma-names = "tx", "rx"; + rx-sample-delay-ns = <10>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_SPI0>, <&cru PCLK_SPI0>; + clock-names = "spiclk", "apb_pclk"; + pinctrl-0 = <&spi1_pins>; + pinctrl-1 = <&spi1_sleep>; + pinctrl-names = "default", "sleep"; + }; |