diff options
Diffstat (limited to 'Documentation/media/uapi/cec/cec-ioc-adap-g-log-addrs.rst')
| -rw-r--r-- | Documentation/media/uapi/cec/cec-ioc-adap-g-log-addrs.rst | 371 |
1 files changed, 371 insertions, 0 deletions
diff --git a/Documentation/media/uapi/cec/cec-ioc-adap-g-log-addrs.rst b/Documentation/media/uapi/cec/cec-ioc-adap-g-log-addrs.rst new file mode 100644 index 000000000..84f431a02 --- /dev/null +++ b/Documentation/media/uapi/cec/cec-ioc-adap-g-log-addrs.rst @@ -0,0 +1,371 @@ +.. -*- coding: utf-8; mode: rst -*- + +.. _CEC_ADAP_LOG_ADDRS: +.. _CEC_ADAP_G_LOG_ADDRS: +.. _CEC_ADAP_S_LOG_ADDRS: + +**************************************************** +ioctls CEC_ADAP_G_LOG_ADDRS and CEC_ADAP_S_LOG_ADDRS +**************************************************** + +Name +==== + +CEC_ADAP_G_LOG_ADDRS, CEC_ADAP_S_LOG_ADDRS - Get or set the logical addresses + + +Synopsis +======== + +.. c:function:: int ioctl( int fd, CEC_ADAP_G_LOG_ADDRS, struct cec_log_addrs *argp ) + :name: CEC_ADAP_G_LOG_ADDRS + +.. c:function:: int ioctl( int fd, CEC_ADAP_S_LOG_ADDRS, struct cec_log_addrs *argp ) + :name: CEC_ADAP_S_LOG_ADDRS + +Arguments +========= + +``fd`` + File descriptor returned by :c:func:`open() <cec-open>`. + +``argp`` + Pointer to struct :c:type:`cec_log_addrs`. + +Description +=========== + +To query the current CEC logical addresses, applications call +:ref:`ioctl CEC_ADAP_G_LOG_ADDRS <CEC_ADAP_G_LOG_ADDRS>` with a pointer to a +struct :c:type:`cec_log_addrs` where the driver stores the logical addresses. + +To set new logical addresses, applications fill in +struct :c:type:`cec_log_addrs` and call :ref:`ioctl CEC_ADAP_S_LOG_ADDRS <CEC_ADAP_S_LOG_ADDRS>` +with a pointer to this struct. The :ref:`ioctl CEC_ADAP_S_LOG_ADDRS <CEC_ADAP_S_LOG_ADDRS>` +is only available if ``CEC_CAP_LOG_ADDRS`` is set (the ``ENOTTY`` error code is +returned otherwise). The :ref:`ioctl CEC_ADAP_S_LOG_ADDRS <CEC_ADAP_S_LOG_ADDRS>` +can only be called by a file descriptor in initiator mode (see :ref:`CEC_S_MODE`), if not +the ``EBUSY`` error code will be returned. + +To clear existing logical addresses set ``num_log_addrs`` to 0. All other fields +will be ignored in that case. The adapter will go to the unconfigured state and the +``cec_version``, ``vendor_id`` and ``osd_name`` fields are all reset to their default +values (CEC version 2.0, no vendor ID and an empty OSD name). + +If the physical address is valid (see :ref:`ioctl CEC_ADAP_S_PHYS_ADDR <CEC_ADAP_S_PHYS_ADDR>`), +then this ioctl will block until all requested logical +addresses have been claimed. If the file descriptor is in non-blocking mode then it will +not wait for the logical addresses to be claimed, instead it just returns 0. + +A :ref:`CEC_EVENT_STATE_CHANGE <CEC-EVENT-STATE-CHANGE>` event is sent when the +logical addresses are claimed or cleared. + +Attempting to call :ref:`ioctl CEC_ADAP_S_LOG_ADDRS <CEC_ADAP_S_LOG_ADDRS>` when +logical address types are already defined will return with error ``EBUSY``. + +.. c:type:: cec_log_addrs + +.. tabularcolumns:: |p{1.0cm}|p{8.0cm}|p{7.5cm}| + +.. cssclass:: longtable + +.. flat-table:: struct cec_log_addrs + :header-rows: 0 + :stub-columns: 0 + :widths: 1 1 16 + + * - __u8 + - ``log_addr[CEC_MAX_LOG_ADDRS]`` + - The actual logical addresses that were claimed. This is set by the + driver. If no logical address could be claimed, then it is set to + ``CEC_LOG_ADDR_INVALID``. If this adapter is Unregistered, then + ``log_addr[0]`` is set to 0xf and all others to + ``CEC_LOG_ADDR_INVALID``. + * - __u16 + - ``log_addr_mask`` + - The bitmask of all logical addresses this adapter has claimed. If + this adapter is Unregistered then ``log_addr_mask`` sets bit 15 + and clears all other bits. If this adapter is not configured at + all, then ``log_addr_mask`` is set to 0. Set by the driver. + * - __u8 + - ``cec_version`` + - The CEC version that this adapter shall use. See + :ref:`cec-versions`. Used to implement the + ``CEC_MSG_CEC_VERSION`` and ``CEC_MSG_REPORT_FEATURES`` messages. + Note that :ref:`CEC_OP_CEC_VERSION_1_3A <CEC-OP-CEC-VERSION-1-3A>` is not allowed by the CEC + framework. + * - __u8 + - ``num_log_addrs`` + - Number of logical addresses to set up. Must be ≤ + ``available_log_addrs`` as returned by + :ref:`CEC_ADAP_G_CAPS`. All arrays in + this structure are only filled up to index + ``available_log_addrs``-1. The remaining array elements will be + ignored. Note that the CEC 2.0 standard allows for a maximum of 2 + logical addresses, although some hardware has support for more. + ``CEC_MAX_LOG_ADDRS`` is 4. The driver will return the actual + number of logical addresses it could claim, which may be less than + what was requested. If this field is set to 0, then the CEC + adapter shall clear all claimed logical addresses and all other + fields will be ignored. + * - __u32 + - ``vendor_id`` + - The vendor ID is a 24-bit number that identifies the specific + vendor or entity. Based on this ID vendor specific commands may be + defined. If you do not want a vendor ID then set it to + ``CEC_VENDOR_ID_NONE``. + * - __u32 + - ``flags`` + - Flags. See :ref:`cec-log-addrs-flags` for a list of available flags. + * - char + - ``osd_name[15]`` + - The On-Screen Display name as is returned by the + ``CEC_MSG_SET_OSD_NAME`` message. + * - __u8 + - ``primary_device_type[CEC_MAX_LOG_ADDRS]`` + - Primary device type for each logical address. See + :ref:`cec-prim-dev-types` for possible types. + * - __u8 + - ``log_addr_type[CEC_MAX_LOG_ADDRS]`` + - Logical address types. See :ref:`cec-log-addr-types` for + possible types. The driver will update this with the actual + logical address type that it claimed (e.g. it may have to fallback + to :ref:`CEC_LOG_ADDR_TYPE_UNREGISTERED <CEC-LOG-ADDR-TYPE-UNREGISTERED>`). + * - __u8 + - ``all_device_types[CEC_MAX_LOG_ADDRS]`` + - CEC 2.0 specific: the bit mask of all device types. See + :ref:`cec-all-dev-types-flags`. It is used in the CEC 2.0 + ``CEC_MSG_REPORT_FEATURES`` message. For CEC 1.4 you can either leave + this field to 0, or fill it in according to the CEC 2.0 guidelines to + give the CEC framework more information about the device type, even + though the framework won't use it directly in the CEC message. + * - __u8 + - ``features[CEC_MAX_LOG_ADDRS][12]`` + - Features for each logical address. It is used in the CEC 2.0 + ``CEC_MSG_REPORT_FEATURES`` message. The 12 bytes include both the + RC Profile and the Device Features. For CEC 1.4 you can either leave + this field to all 0, or fill it in according to the CEC 2.0 guidelines to + give the CEC framework more information about the device type, even + though the framework won't use it directly in the CEC message. + + +.. tabularcolumns:: |p{7.8cm}|p{1.0cm}|p{8.7cm}| + +.. _cec-log-addrs-flags: + +.. flat-table:: Flags for struct cec_log_addrs + :header-rows: 0 + :stub-columns: 0 + :widths: 3 1 4 + + * .. _`CEC-LOG-ADDRS-FL-ALLOW-UNREG-FALLBACK`: + + - ``CEC_LOG_ADDRS_FL_ALLOW_UNREG_FALLBACK`` + - 1 + - By default if no logical address of the requested type can be claimed, then + it will go back to the unconfigured state. If this flag is set, then it will + fallback to the Unregistered logical address. Note that if the Unregistered + logical address was explicitly requested, then this flag has no effect. + * .. _`CEC-LOG-ADDRS-FL-ALLOW-RC-PASSTHRU`: + + - ``CEC_LOG_ADDRS_FL_ALLOW_RC_PASSTHRU`` + - 2 + - By default the ``CEC_MSG_USER_CONTROL_PRESSED`` and ``CEC_MSG_USER_CONTROL_RELEASED`` + messages are only passed on to the follower(s), if any. If this flag is set, + then these messages are also passed on to the remote control input subsystem + and will appear as keystrokes. This features needs to be enabled explicitly. + If CEC is used to enter e.g. passwords, then you may not want to enable this + to avoid trivial snooping of the keystrokes. + * .. _`CEC-LOG-ADDRS-FL-CDC-ONLY`: + + - ``CEC_LOG_ADDRS_FL_CDC_ONLY`` + - 4 + - If this flag is set, then the device is CDC-Only. CDC-Only CEC devices + are CEC devices that can only handle CDC messages. + + All other messages are ignored. + + +.. tabularcolumns:: |p{7.8cm}|p{1.0cm}|p{8.7cm}| + +.. _cec-versions: + +.. flat-table:: CEC Versions + :header-rows: 0 + :stub-columns: 0 + :widths: 3 1 4 + + * .. _`CEC-OP-CEC-VERSION-1-3A`: + + - ``CEC_OP_CEC_VERSION_1_3A`` + - 4 + - CEC version according to the HDMI 1.3a standard. + * .. _`CEC-OP-CEC-VERSION-1-4B`: + + - ``CEC_OP_CEC_VERSION_1_4B`` + - 5 + - CEC version according to the HDMI 1.4b standard. + * .. _`CEC-OP-CEC-VERSION-2-0`: + + - ``CEC_OP_CEC_VERSION_2_0`` + - 6 + - CEC version according to the HDMI 2.0 standard. + + +.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}| + +.. _cec-prim-dev-types: + +.. flat-table:: CEC Primary Device Types + :header-rows: 0 + :stub-columns: 0 + :widths: 3 1 4 + + * .. _`CEC-OP-PRIM-DEVTYPE-TV`: + + - ``CEC_OP_PRIM_DEVTYPE_TV`` + - 0 + - Use for a TV. + * .. _`CEC-OP-PRIM-DEVTYPE-RECORD`: + + - ``CEC_OP_PRIM_DEVTYPE_RECORD`` + - 1 + - Use for a recording device. + * .. _`CEC-OP-PRIM-DEVTYPE-TUNER`: + + - ``CEC_OP_PRIM_DEVTYPE_TUNER`` + - 3 + - Use for a device with a tuner. + * .. _`CEC-OP-PRIM-DEVTYPE-PLAYBACK`: + + - ``CEC_OP_PRIM_DEVTYPE_PLAYBACK`` + - 4 + - Use for a playback device. + * .. _`CEC-OP-PRIM-DEVTYPE-AUDIOSYSTEM`: + + - ``CEC_OP_PRIM_DEVTYPE_AUDIOSYSTEM`` + - 5 + - Use for an audio system (e.g. an audio/video receiver). + * .. _`CEC-OP-PRIM-DEVTYPE-SWITCH`: + + - ``CEC_OP_PRIM_DEVTYPE_SWITCH`` + - 6 + - Use for a CEC switch. + * .. _`CEC-OP-PRIM-DEVTYPE-VIDEOPROC`: + + - ``CEC_OP_PRIM_DEVTYPE_VIDEOPROC`` + - 7 + - Use for a video processor device. + + +.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}| + +.. _cec-log-addr-types: + +.. flat-table:: CEC Logical Address Types + :header-rows: 0 + :stub-columns: 0 + :widths: 3 1 16 + + * .. _`CEC-LOG-ADDR-TYPE-TV`: + + - ``CEC_LOG_ADDR_TYPE_TV`` + - 0 + - Use for a TV. + * .. _`CEC-LOG-ADDR-TYPE-RECORD`: + + - ``CEC_LOG_ADDR_TYPE_RECORD`` + - 1 + - Use for a recording device. + * .. _`CEC-LOG-ADDR-TYPE-TUNER`: + + - ``CEC_LOG_ADDR_TYPE_TUNER`` + - 2 + - Use for a tuner device. + * .. _`CEC-LOG-ADDR-TYPE-PLAYBACK`: + + - ``CEC_LOG_ADDR_TYPE_PLAYBACK`` + - 3 + - Use for a playback device. + * .. _`CEC-LOG-ADDR-TYPE-AUDIOSYSTEM`: + + - ``CEC_LOG_ADDR_TYPE_AUDIOSYSTEM`` + - 4 + - Use for an audio system device. + * .. _`CEC-LOG-ADDR-TYPE-SPECIFIC`: + + - ``CEC_LOG_ADDR_TYPE_SPECIFIC`` + - 5 + - Use for a second TV or for a video processor device. + * .. _`CEC-LOG-ADDR-TYPE-UNREGISTERED`: + + - ``CEC_LOG_ADDR_TYPE_UNREGISTERED`` + - 6 + - Use this if you just want to remain unregistered. Used for pure + CEC switches or CDC-only devices (CDC: Capability Discovery and + Control). + + + +.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}| + +.. _cec-all-dev-types-flags: + +.. flat-table:: CEC All Device Types Flags + :header-rows: 0 + :stub-columns: 0 + :widths: 3 1 4 + + * .. _`CEC-OP-ALL-DEVTYPE-TV`: + + - ``CEC_OP_ALL_DEVTYPE_TV`` + - 0x80 + - This supports the TV type. + * .. _`CEC-OP-ALL-DEVTYPE-RECORD`: + + - ``CEC_OP_ALL_DEVTYPE_RECORD`` + - 0x40 + - This supports the Recording type. + * .. _`CEC-OP-ALL-DEVTYPE-TUNER`: + + - ``CEC_OP_ALL_DEVTYPE_TUNER`` + - 0x20 + - This supports the Tuner type. + * .. _`CEC-OP-ALL-DEVTYPE-PLAYBACK`: + + - ``CEC_OP_ALL_DEVTYPE_PLAYBACK`` + - 0x10 + - This supports the Playback type. + * .. _`CEC-OP-ALL-DEVTYPE-AUDIOSYSTEM`: + + - ``CEC_OP_ALL_DEVTYPE_AUDIOSYSTEM`` + - 0x08 + - This supports the Audio System type. + * .. _`CEC-OP-ALL-DEVTYPE-SWITCH`: + + - ``CEC_OP_ALL_DEVTYPE_SWITCH`` + - 0x04 + - This supports the CEC Switch or Video Processing type. + + + +Return Value +============ + +On success 0 is returned, on error -1 and the ``errno`` variable is set +appropriately. The generic error codes are described at the +:ref:`Generic Error Codes <gen-errors>` chapter. + +The :ref:`ioctl CEC_ADAP_S_LOG_ADDRS <CEC_ADAP_S_LOG_ADDRS>` can return the following +error codes: + +ENOTTY + The ``CEC_CAP_LOG_ADDRS`` capability wasn't set, so this ioctl is not supported. + +EBUSY + The CEC adapter is currently configuring itself, or it is already configured and + ``num_log_addrs`` is non-zero, or another filehandle is in exclusive follower or + initiator mode, or the filehandle is in mode ``CEC_MODE_NO_INITIATOR``. + +EINVAL + The contents of struct :c:type:`cec_log_addrs` is invalid. |