diff options
Diffstat (limited to 'Documentation/media/uapi/v4l/extended-controls.rst')
| -rw-r--r-- | Documentation/media/uapi/v4l/extended-controls.rst | 3883 |
1 files changed, 3883 insertions, 0 deletions
diff --git a/Documentation/media/uapi/v4l/extended-controls.rst b/Documentation/media/uapi/v4l/extended-controls.rst new file mode 100644 index 000000000..9f7312bf3 --- /dev/null +++ b/Documentation/media/uapi/v4l/extended-controls.rst @@ -0,0 +1,3883 @@ +.. -*- coding: utf-8; mode: rst -*- + +.. _extended-controls: + +***************** +Extended Controls +***************** + + +Introduction +============ + +The control mechanism as originally designed was meant to be used for +user settings (brightness, saturation, etc). However, it turned out to +be a very useful model for implementing more complicated driver APIs +where each driver implements only a subset of a larger API. + +The MPEG encoding API was the driving force behind designing and +implementing this extended control mechanism: the MPEG standard is quite +large and the currently supported hardware MPEG encoders each only +implement a subset of this standard. Further more, many parameters +relating to how the video is encoded into an MPEG stream are specific to +the MPEG encoding chip since the MPEG standard only defines the format +of the resulting MPEG stream, not how the video is actually encoded into +that format. + +Unfortunately, the original control API lacked some features needed for +these new uses and so it was extended into the (not terribly originally +named) extended control API. + +Even though the MPEG encoding API was the first effort to use the +Extended Control API, nowadays there are also other classes of Extended +Controls, such as Camera Controls and FM Transmitter Controls. The +Extended Controls API as well as all Extended Controls classes are +described in the following text. + + +The Extended Control API +======================== + +Three new ioctls are available: +:ref:`VIDIOC_G_EXT_CTRLS <VIDIOC_G_EXT_CTRLS>`, +:ref:`VIDIOC_S_EXT_CTRLS <VIDIOC_G_EXT_CTRLS>` and +:ref:`VIDIOC_TRY_EXT_CTRLS <VIDIOC_G_EXT_CTRLS>`. These ioctls act +on arrays of controls (as opposed to the +:ref:`VIDIOC_G_CTRL <VIDIOC_G_CTRL>` and +:ref:`VIDIOC_S_CTRL <VIDIOC_G_CTRL>` ioctls that act on a single +control). This is needed since it is often required to atomically change +several controls at once. + +Each of the new ioctls expects a pointer to a struct +:c:type:`v4l2_ext_controls`. This structure +contains a pointer to the control array, a count of the number of +controls in that array and a control class. Control classes are used to +group similar controls into a single class. For example, control class +``V4L2_CTRL_CLASS_USER`` contains all user controls (i. e. all controls +that can also be set using the old :ref:`VIDIOC_S_CTRL <VIDIOC_G_CTRL>` +ioctl). Control class ``V4L2_CTRL_CLASS_MPEG`` contains all controls +relating to MPEG encoding, etc. + +All controls in the control array must belong to the specified control +class. An error is returned if this is not the case. + +It is also possible to use an empty control array (``count`` == 0) to check +whether the specified control class is supported. + +The control array is a struct +:c:type:`v4l2_ext_control` array. The +struct :c:type:`v4l2_ext_control` is very similar to +struct :c:type:`v4l2_control`, except for the fact that +it also allows for 64-bit values and pointers to be passed. + +Since the struct :c:type:`v4l2_ext_control` supports +pointers it is now also possible to have controls with compound types +such as N-dimensional arrays and/or structures. You need to specify the +``V4L2_CTRL_FLAG_NEXT_COMPOUND`` when enumerating controls to actually +be able to see such compound controls. In other words, these controls +with compound types should only be used programmatically. + +Since such compound controls need to expose more information about +themselves than is possible with +:ref:`VIDIOC_QUERYCTRL` the +:ref:`VIDIOC_QUERY_EXT_CTRL <VIDIOC_QUERYCTRL>` ioctl was added. In +particular, this ioctl gives the dimensions of the N-dimensional array +if this control consists of more than one element. + +.. note:: + + #. It is important to realize that due to the flexibility of controls it is + necessary to check whether the control you want to set actually is + supported in the driver and what the valid range of values is. So use + the :ref:`VIDIOC_QUERYCTRL` (or :ref:`VIDIOC_QUERY_EXT_CTRL + <VIDIOC_QUERYCTRL>`) and :ref:`VIDIOC_QUERYMENU <VIDIOC_QUERYCTRL>` + ioctls to check this. + + #. It is possible that some of the menu indices in a control of + type ``V4L2_CTRL_TYPE_MENU`` may not be supported (``VIDIOC_QUERYMENU`` + will return an error). A good example is the list of supported MPEG + audio bitrates. Some drivers only support one or two bitrates, others + support a wider range. + +All controls use machine endianness. + + +Enumerating Extended Controls +============================= + +The recommended way to enumerate over the extended controls is by using +:ref:`VIDIOC_QUERYCTRL` in combination with the +``V4L2_CTRL_FLAG_NEXT_CTRL`` flag: + + +.. code-block:: c + + struct v4l2_queryctrl qctrl; + + qctrl.id = V4L2_CTRL_FLAG_NEXT_CTRL; + while (0 == ioctl (fd, VIDIOC_QUERYCTRL, &qctrl)) { + /* ... */ + qctrl.id |= V4L2_CTRL_FLAG_NEXT_CTRL; + } + +The initial control ID is set to 0 ORed with the +``V4L2_CTRL_FLAG_NEXT_CTRL`` flag. The ``VIDIOC_QUERYCTRL`` ioctl will +return the first control with a higher ID than the specified one. When +no such controls are found an error is returned. + +If you want to get all controls within a specific control class, then +you can set the initial ``qctrl.id`` value to the control class and add +an extra check to break out of the loop when a control of another +control class is found: + + +.. code-block:: c + + qctrl.id = V4L2_CTRL_CLASS_MPEG | V4L2_CTRL_FLAG_NEXT_CTRL; + while (0 == ioctl(fd, VIDIOC_QUERYCTRL, &qctrl)) { + if (V4L2_CTRL_ID2CLASS(qctrl.id) != V4L2_CTRL_CLASS_MPEG) + break; + /* ... */ + qctrl.id |= V4L2_CTRL_FLAG_NEXT_CTRL; + } + +The 32-bit ``qctrl.id`` value is subdivided into three bit ranges: the +top 4 bits are reserved for flags (e. g. ``V4L2_CTRL_FLAG_NEXT_CTRL``) +and are not actually part of the ID. The remaining 28 bits form the +control ID, of which the most significant 12 bits define the control +class and the least significant 16 bits identify the control within the +control class. It is guaranteed that these last 16 bits are always +non-zero for controls. The range of 0x1000 and up are reserved for +driver-specific controls. The macro ``V4L2_CTRL_ID2CLASS(id)`` returns +the control class ID based on a control ID. + +If the driver does not support extended controls, then +``VIDIOC_QUERYCTRL`` will fail when used in combination with +``V4L2_CTRL_FLAG_NEXT_CTRL``. In that case the old method of enumerating +control should be used (see :ref:`enum_all_controls`). But if it is +supported, then it is guaranteed to enumerate over all controls, +including driver-private controls. + + +Creating Control Panels +======================= + +It is possible to create control panels for a graphical user interface +where the user can select the various controls. Basically you will have +to iterate over all controls using the method described above. Each +control class starts with a control of type +``V4L2_CTRL_TYPE_CTRL_CLASS``. ``VIDIOC_QUERYCTRL`` will return the name +of this control class which can be used as the title of a tab page +within a control panel. + +The flags field of struct :ref:`v4l2_queryctrl <v4l2-queryctrl>` also +contains hints on the behavior of the control. See the +:ref:`VIDIOC_QUERYCTRL` documentation for more +details. + + +.. _mpeg-controls: + +Codec Control Reference +======================= + +Below all controls within the Codec control class are described. First +the generic controls, then controls specific for certain hardware. + +.. note:: + + These controls are applicable to all codecs and not just MPEG. The + defines are prefixed with V4L2_CID_MPEG/V4L2_MPEG as the controls + were originally made for MPEG codecs and later extended to cover all + encoding formats. + + +Generic Codec Controls +---------------------- + + +.. _mpeg-control-id: + +Codec Control IDs +^^^^^^^^^^^^^^^^^ + +``V4L2_CID_MPEG_CLASS (class)`` + The Codec class descriptor. Calling + :ref:`VIDIOC_QUERYCTRL` for this control will + return a description of this control class. This description can be + used as the caption of a Tab page in a GUI, for example. + +.. _v4l2-mpeg-stream-type: + +``V4L2_CID_MPEG_STREAM_TYPE`` + (enum) + +enum v4l2_mpeg_stream_type - + The MPEG-1, -2 or -4 output stream type. One cannot assume anything + here. Each hardware MPEG encoder tends to support different subsets + of the available MPEG stream types. This control is specific to + multiplexed MPEG streams. The currently defined stream types are: + + + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + * - ``V4L2_MPEG_STREAM_TYPE_MPEG2_PS`` + - MPEG-2 program stream + * - ``V4L2_MPEG_STREAM_TYPE_MPEG2_TS`` + - MPEG-2 transport stream + * - ``V4L2_MPEG_STREAM_TYPE_MPEG1_SS`` + - MPEG-1 system stream + * - ``V4L2_MPEG_STREAM_TYPE_MPEG2_DVD`` + - MPEG-2 DVD-compatible stream + * - ``V4L2_MPEG_STREAM_TYPE_MPEG1_VCD`` + - MPEG-1 VCD-compatible stream + * - ``V4L2_MPEG_STREAM_TYPE_MPEG2_SVCD`` + - MPEG-2 SVCD-compatible stream + + + +``V4L2_CID_MPEG_STREAM_PID_PMT (integer)`` + Program Map Table Packet ID for the MPEG transport stream (default + 16) + +``V4L2_CID_MPEG_STREAM_PID_AUDIO (integer)`` + Audio Packet ID for the MPEG transport stream (default 256) + +``V4L2_CID_MPEG_STREAM_PID_VIDEO (integer)`` + Video Packet ID for the MPEG transport stream (default 260) + +``V4L2_CID_MPEG_STREAM_PID_PCR (integer)`` + Packet ID for the MPEG transport stream carrying PCR fields (default + 259) + +``V4L2_CID_MPEG_STREAM_PES_ID_AUDIO (integer)`` + Audio ID for MPEG PES + +``V4L2_CID_MPEG_STREAM_PES_ID_VIDEO (integer)`` + Video ID for MPEG PES + +.. _v4l2-mpeg-stream-vbi-fmt: + +``V4L2_CID_MPEG_STREAM_VBI_FMT`` + (enum) + +enum v4l2_mpeg_stream_vbi_fmt - + Some cards can embed VBI data (e. g. Closed Caption, Teletext) into + the MPEG stream. This control selects whether VBI data should be + embedded, and if so, what embedding method should be used. The list + of possible VBI formats depends on the driver. The currently defined + VBI format types are: + + + +.. tabularcolumns:: |p{6 cm}|p{11.5cm}| + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + * - ``V4L2_MPEG_STREAM_VBI_FMT_NONE`` + - No VBI in the MPEG stream + * - ``V4L2_MPEG_STREAM_VBI_FMT_IVTV`` + - VBI in private packets, IVTV format (documented in the kernel + sources in the file + ``Documentation/media/v4l-drivers/cx2341x.rst``) + + + +.. _v4l2-mpeg-audio-sampling-freq: + +``V4L2_CID_MPEG_AUDIO_SAMPLING_FREQ`` + (enum) + +enum v4l2_mpeg_audio_sampling_freq - + MPEG Audio sampling frequency. Possible values are: + + + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + * - ``V4L2_MPEG_AUDIO_SAMPLING_FREQ_44100`` + - 44.1 kHz + * - ``V4L2_MPEG_AUDIO_SAMPLING_FREQ_48000`` + - 48 kHz + * - ``V4L2_MPEG_AUDIO_SAMPLING_FREQ_32000`` + - 32 kHz + + + +.. _v4l2-mpeg-audio-encoding: + +``V4L2_CID_MPEG_AUDIO_ENCODING`` + (enum) + +enum v4l2_mpeg_audio_encoding - + MPEG Audio encoding. This control is specific to multiplexed MPEG + streams. Possible values are: + + + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + * - ``V4L2_MPEG_AUDIO_ENCODING_LAYER_1`` + - MPEG-1/2 Layer I encoding + * - ``V4L2_MPEG_AUDIO_ENCODING_LAYER_2`` + - MPEG-1/2 Layer II encoding + * - ``V4L2_MPEG_AUDIO_ENCODING_LAYER_3`` + - MPEG-1/2 Layer III encoding + * - ``V4L2_MPEG_AUDIO_ENCODING_AAC`` + - MPEG-2/4 AAC (Advanced Audio Coding) + * - ``V4L2_MPEG_AUDIO_ENCODING_AC3`` + - AC-3 aka ATSC A/52 encoding + + + +.. _v4l2-mpeg-audio-l1-bitrate: + +``V4L2_CID_MPEG_AUDIO_L1_BITRATE`` + (enum) + +enum v4l2_mpeg_audio_l1_bitrate - + MPEG-1/2 Layer I bitrate. Possible values are: + + + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + * - ``V4L2_MPEG_AUDIO_L1_BITRATE_32K`` + - 32 kbit/s + * - ``V4L2_MPEG_AUDIO_L1_BITRATE_64K`` + - 64 kbit/s + * - ``V4L2_MPEG_AUDIO_L1_BITRATE_96K`` + - 96 kbit/s + * - ``V4L2_MPEG_AUDIO_L1_BITRATE_128K`` + - 128 kbit/s + * - ``V4L2_MPEG_AUDIO_L1_BITRATE_160K`` + - 160 kbit/s + * - ``V4L2_MPEG_AUDIO_L1_BITRATE_192K`` + - 192 kbit/s + * - ``V4L2_MPEG_AUDIO_L1_BITRATE_224K`` + - 224 kbit/s + * - ``V4L2_MPEG_AUDIO_L1_BITRATE_256K`` + - 256 kbit/s + * - ``V4L2_MPEG_AUDIO_L1_BITRATE_288K`` + - 288 kbit/s + * - ``V4L2_MPEG_AUDIO_L1_BITRATE_320K`` + - 320 kbit/s + * - ``V4L2_MPEG_AUDIO_L1_BITRATE_352K`` + - 352 kbit/s + * - ``V4L2_MPEG_AUDIO_L1_BITRATE_384K`` + - 384 kbit/s + * - ``V4L2_MPEG_AUDIO_L1_BITRATE_416K`` + - 416 kbit/s + * - ``V4L2_MPEG_AUDIO_L1_BITRATE_448K`` + - 448 kbit/s + + + +.. _v4l2-mpeg-audio-l2-bitrate: + +``V4L2_CID_MPEG_AUDIO_L2_BITRATE`` + (enum) + +enum v4l2_mpeg_audio_l2_bitrate - + MPEG-1/2 Layer II bitrate. Possible values are: + + + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + * - ``V4L2_MPEG_AUDIO_L2_BITRATE_32K`` + - 32 kbit/s + * - ``V4L2_MPEG_AUDIO_L2_BITRATE_48K`` + - 48 kbit/s + * - ``V4L2_MPEG_AUDIO_L2_BITRATE_56K`` + - 56 kbit/s + * - ``V4L2_MPEG_AUDIO_L2_BITRATE_64K`` + - 64 kbit/s + * - ``V4L2_MPEG_AUDIO_L2_BITRATE_80K`` + - 80 kbit/s + * - ``V4L2_MPEG_AUDIO_L2_BITRATE_96K`` + - 96 kbit/s + * - ``V4L2_MPEG_AUDIO_L2_BITRATE_112K`` + - 112 kbit/s + * - ``V4L2_MPEG_AUDIO_L2_BITRATE_128K`` + - 128 kbit/s + * - ``V4L2_MPEG_AUDIO_L2_BITRATE_160K`` + - 160 kbit/s + * - ``V4L2_MPEG_AUDIO_L2_BITRATE_192K`` + - 192 kbit/s + * - ``V4L2_MPEG_AUDIO_L2_BITRATE_224K`` + - 224 kbit/s + * - ``V4L2_MPEG_AUDIO_L2_BITRATE_256K`` + - 256 kbit/s + * - ``V4L2_MPEG_AUDIO_L2_BITRATE_320K`` + - 320 kbit/s + * - ``V4L2_MPEG_AUDIO_L2_BITRATE_384K`` + - 384 kbit/s + + + +.. _v4l2-mpeg-audio-l3-bitrate: + +``V4L2_CID_MPEG_AUDIO_L3_BITRATE`` + (enum) + +enum v4l2_mpeg_audio_l3_bitrate - + MPEG-1/2 Layer III bitrate. Possible values are: + + + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + * - ``V4L2_MPEG_AUDIO_L3_BITRATE_32K`` + - 32 kbit/s + * - ``V4L2_MPEG_AUDIO_L3_BITRATE_40K`` + - 40 kbit/s + * - ``V4L2_MPEG_AUDIO_L3_BITRATE_48K`` + - 48 kbit/s + * - ``V4L2_MPEG_AUDIO_L3_BITRATE_56K`` + - 56 kbit/s + * - ``V4L2_MPEG_AUDIO_L3_BITRATE_64K`` + - 64 kbit/s + * - ``V4L2_MPEG_AUDIO_L3_BITRATE_80K`` + - 80 kbit/s + * - ``V4L2_MPEG_AUDIO_L3_BITRATE_96K`` + - 96 kbit/s + * - ``V4L2_MPEG_AUDIO_L3_BITRATE_112K`` + - 112 kbit/s + * - ``V4L2_MPEG_AUDIO_L3_BITRATE_128K`` + - 128 kbit/s + * - ``V4L2_MPEG_AUDIO_L3_BITRATE_160K`` + - 160 kbit/s + * - ``V4L2_MPEG_AUDIO_L3_BITRATE_192K`` + - 192 kbit/s + * - ``V4L2_MPEG_AUDIO_L3_BITRATE_224K`` + - 224 kbit/s + * - ``V4L2_MPEG_AUDIO_L3_BITRATE_256K`` + - 256 kbit/s + * - ``V4L2_MPEG_AUDIO_L3_BITRATE_320K`` + - 320 kbit/s + + + +``V4L2_CID_MPEG_AUDIO_AAC_BITRATE (integer)`` + AAC bitrate in bits per second. + +.. _v4l2-mpeg-audio-ac3-bitrate: + +``V4L2_CID_MPEG_AUDIO_AC3_BITRATE`` + (enum) + +enum v4l2_mpeg_audio_ac3_bitrate - + AC-3 bitrate. Possible values are: + + + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + * - ``V4L2_MPEG_AUDIO_AC3_BITRATE_32K`` + - 32 kbit/s + * - ``V4L2_MPEG_AUDIO_AC3_BITRATE_40K`` + - 40 kbit/s + * - ``V4L2_MPEG_AUDIO_AC3_BITRATE_48K`` + - 48 kbit/s + * - ``V4L2_MPEG_AUDIO_AC3_BITRATE_56K`` + - 56 kbit/s + * - ``V4L2_MPEG_AUDIO_AC3_BITRATE_64K`` + - 64 kbit/s + * - ``V4L2_MPEG_AUDIO_AC3_BITRATE_80K`` + - 80 kbit/s + * - ``V4L2_MPEG_AUDIO_AC3_BITRATE_96K`` + - 96 kbit/s + * - ``V4L2_MPEG_AUDIO_AC3_BITRATE_112K`` + - 112 kbit/s + * - ``V4L2_MPEG_AUDIO_AC3_BITRATE_128K`` + - 128 kbit/s + * - ``V4L2_MPEG_AUDIO_AC3_BITRATE_160K`` + - 160 kbit/s + * - ``V4L2_MPEG_AUDIO_AC3_BITRATE_192K`` + - 192 kbit/s + * - ``V4L2_MPEG_AUDIO_AC3_BITRATE_224K`` + - 224 kbit/s + * - ``V4L2_MPEG_AUDIO_AC3_BITRATE_256K`` + - 256 kbit/s + * - ``V4L2_MPEG_AUDIO_AC3_BITRATE_320K`` + - 320 kbit/s + * - ``V4L2_MPEG_AUDIO_AC3_BITRATE_384K`` + - 384 kbit/s + * - ``V4L2_MPEG_AUDIO_AC3_BITRATE_448K`` + - 448 kbit/s + * - ``V4L2_MPEG_AUDIO_AC3_BITRATE_512K`` + - 512 kbit/s + * - ``V4L2_MPEG_AUDIO_AC3_BITRATE_576K`` + - 576 kbit/s + * - ``V4L2_MPEG_AUDIO_AC3_BITRATE_640K`` + - 640 kbit/s + + + +.. _v4l2-mpeg-audio-mode: + +``V4L2_CID_MPEG_AUDIO_MODE`` + (enum) + +enum v4l2_mpeg_audio_mode - + MPEG Audio mode. Possible values are: + + + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + * - ``V4L2_MPEG_AUDIO_MODE_STEREO`` + - Stereo + * - ``V4L2_MPEG_AUDIO_MODE_JOINT_STEREO`` + - Joint Stereo + * - ``V4L2_MPEG_AUDIO_MODE_DUAL`` + - Bilingual + * - ``V4L2_MPEG_AUDIO_MODE_MONO`` + - Mono + + + +.. _v4l2-mpeg-audio-mode-extension: + +``V4L2_CID_MPEG_AUDIO_MODE_EXTENSION`` + (enum) + +enum v4l2_mpeg_audio_mode_extension - + Joint Stereo audio mode extension. In Layer I and II they indicate + which subbands are in intensity stereo. All other subbands are coded + in stereo. Layer III is not (yet) supported. Possible values are: + + + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + * - ``V4L2_MPEG_AUDIO_MODE_EXTENSION_BOUND_4`` + - Subbands 4-31 in intensity stereo + * - ``V4L2_MPEG_AUDIO_MODE_EXTENSION_BOUND_8`` + - Subbands 8-31 in intensity stereo + * - ``V4L2_MPEG_AUDIO_MODE_EXTENSION_BOUND_12`` + - Subbands 12-31 in intensity stereo + * - ``V4L2_MPEG_AUDIO_MODE_EXTENSION_BOUND_16`` + - Subbands 16-31 in intensity stereo + + + +.. _v4l2-mpeg-audio-emphasis: + +``V4L2_CID_MPEG_AUDIO_EMPHASIS`` + (enum) + +enum v4l2_mpeg_audio_emphasis - + Audio Emphasis. Possible values are: + + + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + * - ``V4L2_MPEG_AUDIO_EMPHASIS_NONE`` + - None + * - ``V4L2_MPEG_AUDIO_EMPHASIS_50_DIV_15_uS`` + - 50/15 microsecond emphasis + * - ``V4L2_MPEG_AUDIO_EMPHASIS_CCITT_J17`` + - CCITT J.17 + + + +.. _v4l2-mpeg-audio-crc: + +``V4L2_CID_MPEG_AUDIO_CRC`` + (enum) + +enum v4l2_mpeg_audio_crc - + CRC method. Possible values are: + + + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + * - ``V4L2_MPEG_AUDIO_CRC_NONE`` + - None + * - ``V4L2_MPEG_AUDIO_CRC_CRC16`` + - 16 bit parity check + + + +``V4L2_CID_MPEG_AUDIO_MUTE (boolean)`` + Mutes the audio when capturing. This is not done by muting audio + hardware, which can still produce a slight hiss, but in the encoder + itself, guaranteeing a fixed and reproducible audio bitstream. 0 = + unmuted, 1 = muted. + +.. _v4l2-mpeg-audio-dec-playback: + +``V4L2_CID_MPEG_AUDIO_DEC_PLAYBACK`` + (enum) + +enum v4l2_mpeg_audio_dec_playback - + Determines how monolingual audio should be played back. Possible + values are: + + + +.. tabularcolumns:: |p{9.0cm}|p{8.5cm}| + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + * - ``V4L2_MPEG_AUDIO_DEC_PLAYBACK_AUTO`` + - Automatically determines the best playback mode. + * - ``V4L2_MPEG_AUDIO_DEC_PLAYBACK_STEREO`` + - Stereo playback. + * - ``V4L2_MPEG_AUDIO_DEC_PLAYBACK_LEFT`` + - Left channel playback. + * - ``V4L2_MPEG_AUDIO_DEC_PLAYBACK_RIGHT`` + - Right channel playback. + * - ``V4L2_MPEG_AUDIO_DEC_PLAYBACK_MONO`` + - Mono playback. + * - ``V4L2_MPEG_AUDIO_DEC_PLAYBACK_SWAPPED_STEREO`` + - Stereo playback with swapped left and right channels. + + + +.. _v4l2-mpeg-audio-dec-multilingual-playback: + +``V4L2_CID_MPEG_AUDIO_DEC_MULTILINGUAL_PLAYBACK`` + (enum) + +enum v4l2_mpeg_audio_dec_playback - + Determines how multilingual audio should be played back. + +.. _v4l2-mpeg-video-encoding: + +``V4L2_CID_MPEG_VIDEO_ENCODING`` + (enum) + +enum v4l2_mpeg_video_encoding - + MPEG Video encoding method. This control is specific to multiplexed + MPEG streams. Possible values are: + + + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + * - ``V4L2_MPEG_VIDEO_ENCODING_MPEG_1`` + - MPEG-1 Video encoding + * - ``V4L2_MPEG_VIDEO_ENCODING_MPEG_2`` + - MPEG-2 Video encoding + * - ``V4L2_MPEG_VIDEO_ENCODING_MPEG_4_AVC`` + - MPEG-4 AVC (H.264) Video encoding + + + +.. _v4l2-mpeg-video-aspect: + +``V4L2_CID_MPEG_VIDEO_ASPECT`` + (enum) + +enum v4l2_mpeg_video_aspect - + Video aspect. Possible values are: + + + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + * - ``V4L2_MPEG_VIDEO_ASPECT_1x1`` + * - ``V4L2_MPEG_VIDEO_ASPECT_4x3`` + * - ``V4L2_MPEG_VIDEO_ASPECT_16x9`` + * - ``V4L2_MPEG_VIDEO_ASPECT_221x100`` + + + +``V4L2_CID_MPEG_VIDEO_B_FRAMES (integer)`` + Number of B-Frames (default 2) + +``V4L2_CID_MPEG_VIDEO_GOP_SIZE (integer)`` + GOP size (default 12) + +``V4L2_CID_MPEG_VIDEO_GOP_CLOSURE (boolean)`` + GOP closure (default 1) + +``V4L2_CID_MPEG_VIDEO_PULLDOWN (boolean)`` + Enable 3:2 pulldown (default 0) + +.. _v4l2-mpeg-video-bitrate-mode: + +``V4L2_CID_MPEG_VIDEO_BITRATE_MODE`` + (enum) + +enum v4l2_mpeg_video_bitrate_mode - + Video bitrate mode. Possible values are: + + + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + * - ``V4L2_MPEG_VIDEO_BITRATE_MODE_VBR`` + - Variable bitrate + * - ``V4L2_MPEG_VIDEO_BITRATE_MODE_CBR`` + - Constant bitrate + + + +``V4L2_CID_MPEG_VIDEO_BITRATE (integer)`` + Video bitrate in bits per second. + +``V4L2_CID_MPEG_VIDEO_BITRATE_PEAK (integer)`` + Peak video bitrate in bits per second. Must be larger or equal to + the average video bitrate. It is ignored if the video bitrate mode + is set to constant bitrate. + +``V4L2_CID_MPEG_VIDEO_TEMPORAL_DECIMATION (integer)`` + For every captured frame, skip this many subsequent frames (default + 0). + +``V4L2_CID_MPEG_VIDEO_MUTE (boolean)`` + "Mutes" the video to a fixed color when capturing. This is useful + for testing, to produce a fixed video bitstream. 0 = unmuted, 1 = + muted. + +``V4L2_CID_MPEG_VIDEO_MUTE_YUV (integer)`` + Sets the "mute" color of the video. The supplied 32-bit integer is + interpreted as follows (bit 0 = least significant bit): + + + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + * - Bit 0:7 + - V chrominance information + * - Bit 8:15 + - U chrominance information + * - Bit 16:23 + - Y luminance information + * - Bit 24:31 + - Must be zero. + + + +.. _v4l2-mpeg-video-dec-pts: + +``V4L2_CID_MPEG_VIDEO_DEC_PTS (integer64)`` + This read-only control returns the 33-bit video Presentation Time + Stamp as defined in ITU T-REC-H.222.0 and ISO/IEC 13818-1 of the + currently displayed frame. This is the same PTS as is used in + :ref:`VIDIOC_DECODER_CMD`. + +.. _v4l2-mpeg-video-dec-frame: + +``V4L2_CID_MPEG_VIDEO_DEC_FRAME (integer64)`` + This read-only control returns the frame counter of the frame that + is currently displayed (decoded). This value is reset to 0 whenever + the decoder is started. + +``V4L2_CID_MPEG_VIDEO_DECODER_SLICE_INTERFACE (boolean)`` + If enabled the decoder expects to receive a single slice per buffer, + otherwise the decoder expects a single frame in per buffer. + Applicable to the decoder, all codecs. + +``V4L2_CID_MPEG_VIDEO_H264_VUI_SAR_ENABLE (boolean)`` + Enable writing sample aspect ratio in the Video Usability + Information. Applicable to the H264 encoder. + +.. _v4l2-mpeg-video-h264-vui-sar-idc: + +``V4L2_CID_MPEG_VIDEO_H264_VUI_SAR_IDC`` + (enum) + +enum v4l2_mpeg_video_h264_vui_sar_idc - + VUI sample aspect ratio indicator for H.264 encoding. The value is + defined in the table E-1 in the standard. Applicable to the H264 + encoder. + + + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + * - ``V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_UNSPECIFIED`` + - Unspecified + * - ``V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_1x1`` + - 1x1 + * - ``V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_12x11`` + - 12x11 + * - ``V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_10x11`` + - 10x11 + * - ``V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_16x11`` + - 16x11 + * - ``V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_40x33`` + - 40x33 + * - ``V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_24x11`` + - 24x11 + * - ``V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_20x11`` + - 20x11 + * - ``V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_32x11`` + - 32x11 + * - ``V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_80x33`` + - 80x33 + * - ``V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_18x11`` + - 18x11 + * - ``V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_15x11`` + - 15x11 + * - ``V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_64x33`` + - 64x33 + * - ``V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_160x99`` + - 160x99 + * - ``V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_4x3`` + - 4x3 + * - ``V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_3x2`` + - 3x2 + * - ``V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_2x1`` + - 2x1 + * - ``V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_EXTENDED`` + - Extended SAR + + + +``V4L2_CID_MPEG_VIDEO_H264_VUI_EXT_SAR_WIDTH (integer)`` + Extended sample aspect ratio width for H.264 VUI encoding. + Applicable to the H264 encoder. + +``V4L2_CID_MPEG_VIDEO_H264_VUI_EXT_SAR_HEIGHT (integer)`` + Extended sample aspect ratio height for H.264 VUI encoding. + Applicable to the H264 encoder. + +.. _v4l2-mpeg-video-h264-level: + +``V4L2_CID_MPEG_VIDEO_H264_LEVEL`` + (enum) + +enum v4l2_mpeg_video_h264_level - + The level information for the H264 video elementary stream. + Applicable to the H264 encoder. Possible values are: + + + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + * - ``V4L2_MPEG_VIDEO_H264_LEVEL_1_0`` + - Level 1.0 + * - ``V4L2_MPEG_VIDEO_H264_LEVEL_1B`` + - Level 1B + * - ``V4L2_MPEG_VIDEO_H264_LEVEL_1_1`` + - Level 1.1 + * - ``V4L2_MPEG_VIDEO_H264_LEVEL_1_2`` + - Level 1.2 + * - ``V4L2_MPEG_VIDEO_H264_LEVEL_1_3`` + - Level 1.3 + * - ``V4L2_MPEG_VIDEO_H264_LEVEL_2_0`` + - Level 2.0 + * - ``V4L2_MPEG_VIDEO_H264_LEVEL_2_1`` + - Level 2.1 + * - ``V4L2_MPEG_VIDEO_H264_LEVEL_2_2`` + - Level 2.2 + * - ``V4L2_MPEG_VIDEO_H264_LEVEL_3_0`` + - Level 3.0 + * - ``V4L2_MPEG_VIDEO_H264_LEVEL_3_1`` + - Level 3.1 + * - ``V4L2_MPEG_VIDEO_H264_LEVEL_3_2`` + - Level 3.2 + * - ``V4L2_MPEG_VIDEO_H264_LEVEL_4_0`` + - Level 4.0 + * - ``V4L2_MPEG_VIDEO_H264_LEVEL_4_1`` + - Level 4.1 + * - ``V4L2_MPEG_VIDEO_H264_LEVEL_4_2`` + - Level 4.2 + * - ``V4L2_MPEG_VIDEO_H264_LEVEL_5_0`` + - Level 5.0 + * - ``V4L2_MPEG_VIDEO_H264_LEVEL_5_1`` + - Level 5.1 + + + +.. _v4l2-mpeg-video-mpeg4-level: + +``V4L2_CID_MPEG_VIDEO_MPEG4_LEVEL`` + (enum) + +enum v4l2_mpeg_video_mpeg4_level - + The level information for the MPEG4 elementary stream. Applicable to + the MPEG4 encoder. Possible values are: + + + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + * - ``V4L2_MPEG_VIDEO_MPEG4_LEVEL_0`` + - Level 0 + * - ``V4L2_MPEG_VIDEO_MPEG4_LEVEL_0B`` + - Level 0b + * - ``V4L2_MPEG_VIDEO_MPEG4_LEVEL_1`` + - Level 1 + * - ``V4L2_MPEG_VIDEO_MPEG4_LEVEL_2`` + - Level 2 + * - ``V4L2_MPEG_VIDEO_MPEG4_LEVEL_3`` + - Level 3 + * - ``V4L2_MPEG_VIDEO_MPEG4_LEVEL_3B`` + - Level 3b + * - ``V4L2_MPEG_VIDEO_MPEG4_LEVEL_4`` + - Level 4 + * - ``V4L2_MPEG_VIDEO_MPEG4_LEVEL_5`` + - Level 5 + + + +.. _v4l2-mpeg-video-h264-profile: + +``V4L2_CID_MPEG_VIDEO_H264_PROFILE`` + (enum) + +enum v4l2_mpeg_video_h264_profile - + The profile information for H264. Applicable to the H264 encoder. + Possible values are: + + + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + * - ``V4L2_MPEG_VIDEO_H264_PROFILE_BASELINE`` + - Baseline profile + * - ``V4L2_MPEG_VIDEO_H264_PROFILE_CONSTRAINED_BASELINE`` + - Constrained Baseline profile + * - ``V4L2_MPEG_VIDEO_H264_PROFILE_MAIN`` + - Main profile + * - ``V4L2_MPEG_VIDEO_H264_PROFILE_EXTENDED`` + - Extended profile + * - ``V4L2_MPEG_VIDEO_H264_PROFILE_HIGH`` + - High profile + * - ``V4L2_MPEG_VIDEO_H264_PROFILE_HIGH_10`` + - High 10 profile + * - ``V4L2_MPEG_VIDEO_H264_PROFILE_HIGH_422`` + - High 422 profile + * - ``V4L2_MPEG_VIDEO_H264_PROFILE_HIGH_444_PREDICTIVE`` + - High 444 Predictive profile + * - ``V4L2_MPEG_VIDEO_H264_PROFILE_HIGH_10_INTRA`` + - High 10 Intra profile + * - ``V4L2_MPEG_VIDEO_H264_PROFILE_HIGH_422_INTRA`` + - High 422 Intra profile + * - ``V4L2_MPEG_VIDEO_H264_PROFILE_HIGH_444_INTRA`` + - High 444 Intra profile + * - ``V4L2_MPEG_VIDEO_H264_PROFILE_CAVLC_444_INTRA`` + - CAVLC 444 Intra profile + * - ``V4L2_MPEG_VIDEO_H264_PROFILE_SCALABLE_BASELINE`` + - Scalable Baseline profile + * - ``V4L2_MPEG_VIDEO_H264_PROFILE_SCALABLE_HIGH`` + - Scalable High profile + * - ``V4L2_MPEG_VIDEO_H264_PROFILE_SCALABLE_HIGH_INTRA`` + - Scalable High Intra profile + * - ``V4L2_MPEG_VIDEO_H264_PROFILE_STEREO_HIGH`` + - Stereo High profile + * - ``V4L2_MPEG_VIDEO_H264_PROFILE_MULTIVIEW_HIGH`` + - Multiview High profile + + + +.. _v4l2-mpeg-video-mpeg4-profile: + +``V4L2_CID_MPEG_VIDEO_MPEG4_PROFILE`` + (enum) + +enum v4l2_mpeg_video_mpeg4_profile - + The profile information for MPEG4. Applicable to the MPEG4 encoder. + Possible values are: + + + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + * - ``V4L2_MPEG_VIDEO_MPEG4_PROFILE_SIMPLE`` + - Simple profile + * - ``V4L2_MPEG_VIDEO_MPEG4_PROFILE_ADVANCED_SIMPLE`` + - Advanced Simple profile + * - ``V4L2_MPEG_VIDEO_MPEG4_PROFILE_CORE`` + - Core profile + * - ``V4L2_MPEG_VIDEO_MPEG4_PROFILE_SIMPLE_SCALABLE`` + - Simple Scalable profile + * - ``V4L2_MPEG_VIDEO_MPEG4_PROFILE_ADVANCED_CODING_EFFICIENCY`` + - + + + +``V4L2_CID_MPEG_VIDEO_MAX_REF_PIC (integer)`` + The maximum number of reference pictures used for encoding. + Applicable to the encoder. + +.. _v4l2-mpeg-video-multi-slice-mode: + +``V4L2_CID_MPEG_VIDEO_MULTI_SLICE_MODE`` + (enum) + +enum v4l2_mpeg_video_multi_slice_mode - + Determines how the encoder should handle division of frame into + slices. Applicable to the encoder. Possible values are: + + + +.. tabularcolumns:: |p{8.7cm}|p{8.8cm}| + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + * - ``V4L2_MPEG_VIDEO_MULTI_SLICE_MODE_SINGLE`` + - Single slice per frame. + * - ``V4L2_MPEG_VIDEO_MULTI_SLICE_MODE_MAX_MB`` + - Multiple slices with set maximum number of macroblocks per slice. + * - ``V4L2_MPEG_VIDEO_MULTI_SLICE_MODE_MAX_BYTES`` + - Multiple slice with set maximum size in bytes per slice. + + + +``V4L2_CID_MPEG_VIDEO_MULTI_SLICE_MAX_MB (integer)`` + The maximum number of macroblocks in a slice. Used when + ``V4L2_CID_MPEG_VIDEO_MULTI_SLICE_MODE`` is set to + ``V4L2_MPEG_VIDEO_MULTI_SLICE_MODE_MAX_MB``. Applicable to the + encoder. + +``V4L2_CID_MPEG_VIDEO_MULTI_SLICE_MAX_BYTES (integer)`` + The maximum size of a slice in bytes. Used when + ``V4L2_CID_MPEG_VIDEO_MULTI_SLICE_MODE`` is set to + ``V4L2_MPEG_VIDEO_MULTI_SLICE_MODE_MAX_BYTES``. Applicable to the + encoder. + +.. _v4l2-mpeg-video-h264-loop-filter-mode: + +``V4L2_CID_MPEG_VIDEO_H264_LOOP_FILTER_MODE`` + (enum) + +enum v4l2_mpeg_video_h264_loop_filter_mode - + Loop filter mode for H264 encoder. Possible values are: + + + +.. tabularcolumns:: |p{14.0cm}|p{3.5cm}| + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + * - ``V4L2_MPEG_VIDEO_H264_LOOP_FILTER_MODE_ENABLED`` + - Loop filter is enabled. + * - ``V4L2_MPEG_VIDEO_H264_LOOP_FILTER_MODE_DISABLED`` + - Loop filter is disabled. + * - ``V4L2_MPEG_VIDEO_H264_LOOP_FILTER_MODE_DISABLED_AT_SLICE_BOUNDARY`` + - Loop filter is disabled at the slice boundary. + + + +``V4L2_CID_MPEG_VIDEO_H264_LOOP_FILTER_ALPHA (integer)`` + Loop filter alpha coefficient, defined in the H264 standard. + Applicable to the H264 encoder. + +``V4L2_CID_MPEG_VIDEO_H264_LOOP_FILTER_BETA (integer)`` + Loop filter beta coefficient, defined in the H264 standard. + Applicable to the H264 encoder. + +.. _v4l2-mpeg-video-h264-entropy-mode: + +``V4L2_CID_MPEG_VIDEO_H264_ENTROPY_MODE`` + (enum) + +enum v4l2_mpeg_video_h264_entropy_mode - + Entropy coding mode for H264 - CABAC/CAVALC. Applicable to the H264 + encoder. Possible values are: + + + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + * - ``V4L2_MPEG_VIDEO_H264_ENTROPY_MODE_CAVLC`` + - Use CAVLC entropy coding. + * - ``V4L2_MPEG_VIDEO_H264_ENTROPY_MODE_CABAC`` + - Use CABAC entropy coding. + + + +``V4L2_CID_MPEG_VIDEO_H264_8X8_TRANSFORM (boolean)`` + Enable 8X8 transform for H264. Applicable to the H264 encoder. + +``V4L2_CID_MPEG_VIDEO_CYCLIC_INTRA_REFRESH_MB (integer)`` + Cyclic intra macroblock refresh. This is the number of continuous + macroblocks refreshed every frame. Each frame a successive set of + macroblocks is refreshed until the cycle completes and starts from + the top of the frame. Applicable to H264, H263 and MPEG4 encoder. + +``V4L2_CID_MPEG_VIDEO_FRAME_RC_ENABLE (boolean)`` + Frame level rate control enable. If this control is disabled then + the quantization parameter for each frame type is constant and set + with appropriate controls (e.g. + ``V4L2_CID_MPEG_VIDEO_H263_I_FRAME_QP``). If frame rate control is + enabled then quantization parameter is adjusted to meet the chosen + bitrate. Minimum and maximum value for the quantization parameter + can be set with appropriate controls (e.g. + ``V4L2_CID_MPEG_VIDEO_H263_MIN_QP``). Applicable to encoders. + +``V4L2_CID_MPEG_VIDEO_MB_RC_ENABLE (boolean)`` + Macroblock level rate control enable. Applicable to the MPEG4 and + H264 encoders. + +``V4L2_CID_MPEG_VIDEO_MPEG4_QPEL (boolean)`` + Quarter pixel motion estimation for MPEG4. Applicable to the MPEG4 + encoder. + +``V4L2_CID_MPEG_VIDEO_H263_I_FRAME_QP (integer)`` + Quantization parameter for an I frame for H263. Valid range: from 1 + to 31. + +``V4L2_CID_MPEG_VIDEO_H263_MIN_QP (integer)`` + Minimum quantization parameter for H263. Valid range: from 1 to 31. + +``V4L2_CID_MPEG_VIDEO_H263_MAX_QP (integer)`` + Maximum quantization parameter for H263. Valid range: from 1 to 31. + +``V4L2_CID_MPEG_VIDEO_H263_P_FRAME_QP (integer)`` + Quantization parameter for an P frame for H263. Valid range: from 1 + to 31. + +``V4L2_CID_MPEG_VIDEO_H263_B_FRAME_QP (integer)`` + Quantization parameter for an B frame for H263. Valid range: from 1 + to 31. + +``V4L2_CID_MPEG_VIDEO_H264_I_FRAME_QP (integer)`` + Quantization parameter for an I frame for H264. Valid range: from 0 + to 51. + +``V4L2_CID_MPEG_VIDEO_H264_MIN_QP (integer)`` + Minimum quantization parameter for H264. Valid range: from 0 to 51. + +``V4L2_CID_MPEG_VIDEO_H264_MAX_QP (integer)`` + Maximum quantization parameter for H264. Valid range: from 0 to 51. + +``V4L2_CID_MPEG_VIDEO_H264_P_FRAME_QP (integer)`` + Quantization parameter for an P frame for H264. Valid range: from 0 + to 51. + +``V4L2_CID_MPEG_VIDEO_H264_B_FRAME_QP (integer)`` + Quantization parameter for an B frame for H264. Valid range: from 0 + to 51. + +``V4L2_CID_MPEG_VIDEO_MPEG4_I_FRAME_QP (integer)`` + Quantization parameter for an I frame for MPEG4. Valid range: from 1 + to 31. + +``V4L2_CID_MPEG_VIDEO_MPEG4_MIN_QP (integer)`` + Minimum quantization parameter for MPEG4. Valid range: from 1 to 31. + +``V4L2_CID_MPEG_VIDEO_MPEG4_MAX_QP (integer)`` + Maximum quantization parameter for MPEG4. Valid range: from 1 to 31. + +``V4L2_CID_MPEG_VIDEO_MPEG4_P_FRAME_QP (integer)`` + Quantization parameter for an P frame for MPEG4. Valid range: from 1 + to 31. + +``V4L2_CID_MPEG_VIDEO_MPEG4_B_FRAME_QP (integer)`` + Quantization parameter for an B frame for MPEG4. Valid range: from 1 + to 31. + +``V4L2_CID_MPEG_VIDEO_VBV_SIZE (integer)`` + The Video Buffer Verifier size in kilobytes, it is used as a + limitation of frame skip. The VBV is defined in the standard as a + mean to verify that the produced stream will be successfully + decoded. The standard describes it as "Part of a hypothetical + decoder that is conceptually connected to the output of the encoder. + Its purpose is to provide a constraint on the variability of the + data rate that an encoder or editing process may produce.". + Applicable to the MPEG1, MPEG2, MPEG4 encoders. + +.. _v4l2-mpeg-video-vbv-delay: + +``V4L2_CID_MPEG_VIDEO_VBV_DELAY (integer)`` + Sets the initial delay in milliseconds for VBV buffer control. + +.. _v4l2-mpeg-video-hor-search-range: + +``V4L2_CID_MPEG_VIDEO_MV_H_SEARCH_RANGE (integer)`` + Horizontal search range defines maximum horizontal search area in + pixels to search and match for the present Macroblock (MB) in the + reference picture. This V4L2 control macro is used to set horizontal + search range for motion estimation module in video encoder. + +.. _v4l2-mpeg-video-vert-search-range: + +``V4L2_CID_MPEG_VIDEO_MV_V_SEARCH_RANGE (integer)`` + Vertical search range defines maximum vertical search area in pixels + to search and match for the present Macroblock (MB) in the reference + picture. This V4L2 control macro is used to set vertical search + range for motion estimation module in video encoder. + +.. _v4l2-mpeg-video-force-key-frame: + +``V4L2_CID_MPEG_VIDEO_FORCE_KEY_FRAME (button)`` + Force a key frame for the next queued buffer. Applicable to + encoders. This is a general, codec-agnostic keyframe control. + +``V4L2_CID_MPEG_VIDEO_H264_CPB_SIZE (integer)`` + The Coded Picture Buffer size in kilobytes, it is used as a + limitation of frame skip. The CPB is defined in the H264 standard as + a mean to verify that the produced stream will be successfully + decoded. Applicable to the H264 encoder. + +``V4L2_CID_MPEG_VIDEO_H264_I_PERIOD (integer)`` + Period between I-frames in the open GOP for H264. In case of an open + GOP this is the period between two I-frames. The period between IDR + (Instantaneous Decoding Refresh) frames is taken from the GOP_SIZE + control. An IDR frame, which stands for Instantaneous Decoding + Refresh is an I-frame after which no prior frames are referenced. + This means that a stream can be restarted from an IDR frame without + the need to store or decode any previous frames. Applicable to the + H264 encoder. + +.. _v4l2-mpeg-video-header-mode: + +``V4L2_CID_MPEG_VIDEO_HEADER_MODE`` + (enum) + +enum v4l2_mpeg_video_header_mode - + Determines whether the header is returned as the first buffer or is + it returned together with the first frame. Applicable to encoders. + Possible values are: + + + +.. tabularcolumns:: |p{10.3cm}|p{7.2cm}| + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + * - ``V4L2_MPEG_VIDEO_HEADER_MODE_SEPARATE`` + - The stream header is returned separately in the first buffer. + * - ``V4L2_MPEG_VIDEO_HEADER_MODE_JOINED_WITH_1ST_FRAME`` + - The stream header is returned together with the first encoded + frame. + + + +``V4L2_CID_MPEG_VIDEO_REPEAT_SEQ_HEADER (boolean)`` + Repeat the video sequence headers. Repeating these headers makes + random access to the video stream easier. Applicable to the MPEG1, 2 + and 4 encoder. + +``V4L2_CID_MPEG_VIDEO_DECODER_MPEG4_DEBLOCK_FILTER (boolean)`` + Enabled the deblocking post processing filter for MPEG4 decoder. + Applicable to the MPEG4 decoder. + +``V4L2_CID_MPEG_VIDEO_MPEG4_VOP_TIME_RES (integer)`` + vop_time_increment_resolution value for MPEG4. Applicable to the + MPEG4 encoder. + +``V4L2_CID_MPEG_VIDEO_MPEG4_VOP_TIME_INC (integer)`` + vop_time_increment value for MPEG4. Applicable to the MPEG4 + encoder. + +``V4L2_CID_MPEG_VIDEO_H264_SEI_FRAME_PACKING (boolean)`` + Enable generation of frame packing supplemental enhancement + information in the encoded bitstream. The frame packing SEI message + contains the arrangement of L and R planes for 3D viewing. + Applicable to the H264 encoder. + +``V4L2_CID_MPEG_VIDEO_H264_SEI_FP_CURRENT_FRAME_0 (boolean)`` + Sets current frame as frame0 in frame packing SEI. Applicable to the + H264 encoder. + +.. _v4l2-mpeg-video-h264-sei-fp-arrangement-type: + +``V4L2_CID_MPEG_VIDEO_H264_SEI_FP_ARRANGEMENT_TYPE`` + (enum) + +enum v4l2_mpeg_video_h264_sei_fp_arrangement_type - + Frame packing arrangement type for H264 SEI. Applicable to the H264 + encoder. Possible values are: + +.. tabularcolumns:: |p{12cm}|p{5.5cm}| + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + * - ``V4L2_MPEG_VIDEO_H264_SEI_FP_ARRANGEMENT_TYPE_CHEKERBOARD`` + - Pixels are alternatively from L and R. + * - ``V4L2_MPEG_VIDEO_H264_SEI_FP_ARRANGEMENT_TYPE_COLUMN`` + - L and R are interlaced by column. + * - ``V4L2_MPEG_VIDEO_H264_SEI_FP_ARRANGEMENT_TYPE_ROW`` + - L and R are interlaced by row. + * - ``V4L2_MPEG_VIDEO_H264_SEI_FP_ARRANGEMENT_TYPE_SIDE_BY_SIDE`` + - L is on the left, R on the right. + * - ``V4L2_MPEG_VIDEO_H264_SEI_FP_ARRANGEMENT_TYPE_TOP_BOTTOM`` + - L is on top, R on bottom. + * - ``V4L2_MPEG_VIDEO_H264_SEI_FP_ARRANGEMENT_TYPE_TEMPORAL`` + - One view per frame. + + + +``V4L2_CID_MPEG_VIDEO_H264_FMO (boolean)`` + Enables flexible macroblock ordering in the encoded bitstream. It is + a technique used for restructuring the ordering of macroblocks in + pictures. Applicable to the H264 encoder. + +.. _v4l2-mpeg-video-h264-fmo-map-type: + +``V4L2_CID_MPEG_VIDEO_H264_FMO_MAP_TYPE`` + (enum) + +enum v4l2_mpeg_video_h264_fmo_map_type - + When using FMO, the map type divides the image in different scan + patterns of macroblocks. Applicable to the H264 encoder. Possible + values are: + +.. tabularcolumns:: |p{12.5cm}|p{5.0cm}| + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + * - ``V4L2_MPEG_VIDEO_H264_FMO_MAP_TYPE_INTERLEAVED_SLICES`` + - Slices are interleaved one after other with macroblocks in run + length order. + * - ``V4L2_MPEG_VIDEO_H264_FMO_MAP_TYPE_SCATTERED_SLICES`` + - Scatters the macroblocks based on a mathematical function known to + both encoder and decoder. + * - ``V4L2_MPEG_VIDEO_H264_FMO_MAP_TYPE_FOREGROUND_WITH_LEFT_OVER`` + - Macroblocks arranged in rectangular areas or regions of interest. + * - ``V4L2_MPEG_VIDEO_H264_FMO_MAP_TYPE_BOX_OUT`` + - Slice groups grow in a cyclic way from centre to outwards. + * - ``V4L2_MPEG_VIDEO_H264_FMO_MAP_TYPE_RASTER_SCAN`` + - Slice groups grow in raster scan pattern from left to right. + * - ``V4L2_MPEG_VIDEO_H264_FMO_MAP_TYPE_WIPE_SCAN`` + - Slice groups grow in wipe scan pattern from top to bottom. + * - ``V4L2_MPEG_VIDEO_H264_FMO_MAP_TYPE_EXPLICIT`` + - User defined map type. + + + +``V4L2_CID_MPEG_VIDEO_H264_FMO_SLICE_GROUP (integer)`` + Number of slice groups in FMO. Applicable to the H264 encoder. + +.. _v4l2-mpeg-video-h264-fmo-change-direction: + +``V4L2_CID_MPEG_VIDEO_H264_FMO_CHANGE_DIRECTION`` + (enum) + +enum v4l2_mpeg_video_h264_fmo_change_dir - + Specifies a direction of the slice group change for raster and wipe + maps. Applicable to the H264 encoder. Possible values are: + + + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + * - ``V4L2_MPEG_VIDEO_H264_FMO_CHANGE_DIR_RIGHT`` + - Raster scan or wipe right. + * - ``V4L2_MPEG_VIDEO_H264_FMO_CHANGE_DIR_LEFT`` + - Reverse raster scan or wipe left. + + + +``V4L2_CID_MPEG_VIDEO_H264_FMO_CHANGE_RATE (integer)`` + Specifies the size of the first slice group for raster and wipe map. + Applicable to the H264 encoder. + +``V4L2_CID_MPEG_VIDEO_H264_FMO_RUN_LENGTH (integer)`` + Specifies the number of consecutive macroblocks for the interleaved + map. Applicable to the H264 encoder. + +``V4L2_CID_MPEG_VIDEO_H264_ASO (boolean)`` + Enables arbitrary slice ordering in encoded bitstream. Applicable to + the H264 encoder. + +``V4L2_CID_MPEG_VIDEO_H264_ASO_SLICE_ORDER (integer)`` + Specifies the slice order in ASO. Applicable to the H264 encoder. + The supplied 32-bit integer is interpreted as follows (bit 0 = least + significant bit): + + + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + * - Bit 0:15 + - Slice ID + * - Bit 16:32 + - Slice position or order + + + +``V4L2_CID_MPEG_VIDEO_H264_HIERARCHICAL_CODING (boolean)`` + Enables H264 hierarchical coding. Applicable to the H264 encoder. + +.. _v4l2-mpeg-video-h264-hierarchical-coding-type: + +``V4L2_CID_MPEG_VIDEO_H264_HIERARCHICAL_CODING_TYPE`` + (enum) + +enum v4l2_mpeg_video_h264_hierarchical_coding_type - + Specifies the hierarchical coding type. Applicable to the H264 + encoder. Possible values are: + + + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + * - ``V4L2_MPEG_VIDEO_H264_HIERARCHICAL_CODING_B`` + - Hierarchical B coding. + * - ``V4L2_MPEG_VIDEO_H264_HIERARCHICAL_CODING_P`` + - Hierarchical P coding. + + + +``V4L2_CID_MPEG_VIDEO_H264_HIERARCHICAL_CODING_LAYER (integer)`` + Specifies the number of hierarchical coding layers. Applicable to + the H264 encoder. + +``V4L2_CID_MPEG_VIDEO_H264_HIERARCHICAL_CODING_LAYER_QP (integer)`` + Specifies a user defined QP for each layer. Applicable to the H264 + encoder. The supplied 32-bit integer is interpreted as follows (bit + 0 = least significant bit): + + + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + * - Bit 0:15 + - QP value + * - Bit 16:32 + - Layer number + + + + +MFC 5.1 MPEG Controls +--------------------- + +The following MPEG class controls deal with MPEG decoding and encoding +settings that are specific to the Multi Format Codec 5.1 device present +in the S5P family of SoCs by Samsung. + + +.. _mfc51-control-id: + +MFC 5.1 Control IDs +^^^^^^^^^^^^^^^^^^^ + +``V4L2_CID_MPEG_MFC51_VIDEO_DECODER_H264_DISPLAY_DELAY_ENABLE (boolean)`` + If the display delay is enabled then the decoder is forced to return + a CAPTURE buffer (decoded frame) after processing a certain number + of OUTPUT buffers. The delay can be set through + ``V4L2_CID_MPEG_MFC51_VIDEO_DECODER_H264_DISPLAY_DELAY``. This + feature can be used for example for generating thumbnails of videos. + Applicable to the H264 decoder. + +``V4L2_CID_MPEG_MFC51_VIDEO_DECODER_H264_DISPLAY_DELAY (integer)`` + Display delay value for H264 decoder. The decoder is forced to + return a decoded frame after the set 'display delay' number of + frames. If this number is low it may result in frames returned out + of dispaly order, in addition the hardware may still be using the + returned buffer as a reference picture for subsequent frames. + +``V4L2_CID_MPEG_MFC51_VIDEO_H264_NUM_REF_PIC_FOR_P (integer)`` + The number of reference pictures used for encoding a P picture. + Applicable to the H264 encoder. + +``V4L2_CID_MPEG_MFC51_VIDEO_PADDING (boolean)`` + Padding enable in the encoder - use a color instead of repeating + border pixels. Applicable to encoders. + +``V4L2_CID_MPEG_MFC51_VIDEO_PADDING_YUV (integer)`` + Padding color in the encoder. Applicable to encoders. The supplied + 32-bit integer is interpreted as follows (bit 0 = least significant + bit): + + + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + * - Bit 0:7 + - V chrominance information + * - Bit 8:15 + - U chrominance information + * - Bit 16:23 + - Y luminance information + * - Bit 24:31 + - Must be zero. + + + +``V4L2_CID_MPEG_MFC51_VIDEO_RC_REACTION_COEFF (integer)`` + Reaction coefficient for MFC rate control. Applicable to encoders. + + .. note:: + + #. Valid only when the frame level RC is enabled. + + #. For tight CBR, this field must be small (ex. 2 ~ 10). For + VBR, this field must be large (ex. 100 ~ 1000). + + #. It is not recommended to use the greater number than + FRAME_RATE * (10^9 / BIT_RATE). + +``V4L2_CID_MPEG_MFC51_VIDEO_H264_ADAPTIVE_RC_DARK (boolean)`` + Adaptive rate control for dark region. Valid only when H.264 and + macroblock level RC is enabled + (``V4L2_CID_MPEG_VIDEO_MB_RC_ENABLE``). Applicable to the H264 + encoder. + +``V4L2_CID_MPEG_MFC51_VIDEO_H264_ADAPTIVE_RC_SMOOTH (boolean)`` + Adaptive rate control for smooth region. Valid only when H.264 and + macroblock level RC is enabled + (``V4L2_CID_MPEG_VIDEO_MB_RC_ENABLE``). Applicable to the H264 + encoder. + +``V4L2_CID_MPEG_MFC51_VIDEO_H264_ADAPTIVE_RC_STATIC (boolean)`` + Adaptive rate control for static region. Valid only when H.264 and + macroblock level RC is enabled + (``V4L2_CID_MPEG_VIDEO_MB_RC_ENABLE``). Applicable to the H264 + encoder. + +``V4L2_CID_MPEG_MFC51_VIDEO_H264_ADAPTIVE_RC_ACTIVITY (boolean)`` + Adaptive rate control for activity region. Valid only when H.264 and + macroblock level RC is enabled + (``V4L2_CID_MPEG_VIDEO_MB_RC_ENABLE``). Applicable to the H264 + encoder. + +.. _v4l2-mpeg-mfc51-video-frame-skip-mode: + +``V4L2_CID_MPEG_MFC51_VIDEO_FRAME_SKIP_MODE`` + (enum) + +enum v4l2_mpeg_mfc51_video_frame_skip_mode - + Indicates in what conditions the encoder should skip frames. If + encoding a frame would cause the encoded stream to be larger then a + chosen data limit then the frame will be skipped. Possible values + are: + + +.. tabularcolumns:: |p{9.0cm}|p{8.5cm}| + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + * - ``V4L2_MPEG_MFC51_FRAME_SKIP_MODE_DISABLED`` + - Frame skip mode is disabled. + * - ``V4L2_MPEG_MFC51_FRAME_SKIP_MODE_LEVEL_LIMIT`` + - Frame skip mode enabled and buffer limit is set by the chosen + level and is defined by the standard. + * - ``V4L2_MPEG_MFC51_FRAME_SKIP_MODE_BUF_LIMIT`` + - Frame skip mode enabled and buffer limit is set by the VBV + (MPEG1/2/4) or CPB (H264) buffer size control. + + + +``V4L2_CID_MPEG_MFC51_VIDEO_RC_FIXED_TARGET_BIT (integer)`` + Enable rate-control with fixed target bit. If this setting is + enabled, then the rate control logic of the encoder will calculate + the average bitrate for a GOP and keep it below or equal the set + bitrate target. Otherwise the rate control logic calculates the + overall average bitrate for the stream and keeps it below or equal + to the set bitrate. In the first case the average bitrate for the + whole stream will be smaller then the set bitrate. This is caused + because the average is calculated for smaller number of frames, on + the other hand enabling this setting will ensure that the stream + will meet tight bandwidth constraints. Applicable to encoders. + +.. _v4l2-mpeg-mfc51-video-force-frame-type: + +``V4L2_CID_MPEG_MFC51_VIDEO_FORCE_FRAME_TYPE`` + (enum) + +enum v4l2_mpeg_mfc51_video_force_frame_type - + Force a frame type for the next queued buffer. Applicable to + encoders. Possible values are: + + + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + * - ``V4L2_MPEG_MFC51_FORCE_FRAME_TYPE_DISABLED`` + - Forcing a specific frame type disabled. + * - ``V4L2_MPEG_MFC51_FORCE_FRAME_TYPE_I_FRAME`` + - Force an I-frame. + * - ``V4L2_MPEG_MFC51_FORCE_FRAME_TYPE_NOT_CODED`` + - Force a non-coded frame. + + + + +CX2341x MPEG Controls +--------------------- + +The following MPEG class controls deal with MPEG encoding settings that +are specific to the Conexant CX23415 and CX23416 MPEG encoding chips. + + +.. _cx2341x-control-id: + +CX2341x Control IDs +^^^^^^^^^^^^^^^^^^^ + +.. _v4l2-mpeg-cx2341x-video-spatial-filter-mode: + +``V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE`` + (enum) + +enum v4l2_mpeg_cx2341x_video_spatial_filter_mode - + Sets the Spatial Filter mode (default ``MANUAL``). Possible values + are: + + + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + * - ``V4L2_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE_MANUAL`` + - Choose the filter manually + * - ``V4L2_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE_AUTO`` + - Choose the filter automatically + + + +``V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER (integer (0-15))`` + The setting for the Spatial Filter. 0 = off, 15 = maximum. (Default + is 0.) + +.. _luma-spatial-filter-type: + +``V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE`` + (enum) + +enum v4l2_mpeg_cx2341x_video_luma_spatial_filter_type - + Select the algorithm to use for the Luma Spatial Filter (default + ``1D_HOR``). Possible values: + + + +.. tabularcolumns:: |p{14.5cm}|p{3.0cm}| + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + * - ``V4L2_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE_OFF`` + - No filter + * - ``V4L2_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE_1D_HOR`` + - One-dimensional horizontal + * - ``V4L2_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE_1D_VERT`` + - One-dimensional vertical + * - ``V4L2_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE_2D_HV_SEPARABLE`` + - Two-dimensional separable + * - ``V4L2_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE_2D_SYM_NON_SEPARABLE`` + - Two-dimensional symmetrical non-separable + + + +.. _chroma-spatial-filter-type: + +``V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_SPATIAL_FILTER_TYPE`` + (enum) + +enum v4l2_mpeg_cx2341x_video_chroma_spatial_filter_type - + Select the algorithm for the Chroma Spatial Filter (default + ``1D_HOR``). Possible values are: + + + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + * - ``V4L2_MPEG_CX2341X_VIDEO_CHROMA_SPATIAL_FILTER_TYPE_OFF`` + - No filter + * - ``V4L2_MPEG_CX2341X_VIDEO_CHROMA_SPATIAL_FILTER_TYPE_1D_HOR`` + - One-dimensional horizontal + + + +.. _v4l2-mpeg-cx2341x-video-temporal-filter-mode: + +``V4L2_CID_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE`` + (enum) + +enum v4l2_mpeg_cx2341x_video_temporal_filter_mode - + Sets the Temporal Filter mode (default ``MANUAL``). Possible values + are: + + + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + * - ``V4L2_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE_MANUAL`` + - Choose the filter manually + * - ``V4L2_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE_AUTO`` + - Choose the filter automatically + + + +``V4L2_CID_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER (integer (0-31))`` + The setting for the Temporal Filter. 0 = off, 31 = maximum. (Default + is 8 for full-scale capturing and 0 for scaled capturing.) + +.. _v4l2-mpeg-cx2341x-video-median-filter-type: + +``V4L2_CID_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE`` + (enum) + +enum v4l2_mpeg_cx2341x_video_median_filter_type - + Median Filter Type (default ``OFF``). Possible values are: + + + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + * - ``V4L2_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE_OFF`` + - No filter + * - ``V4L2_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE_HOR`` + - Horizontal filter + * - ``V4L2_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE_VERT`` + - Vertical filter + * - ``V4L2_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE_HOR_VERT`` + - Horizontal and vertical filter + * - ``V4L2_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE_DIAG`` + - Diagonal filter + + + +``V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_MEDIAN_FILTER_BOTTOM (integer (0-255))`` + Threshold above which the luminance median filter is enabled + (default 0) + +``V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_MEDIAN_FILTER_TOP (integer (0-255))`` + Threshold below which the luminance median filter is enabled + (default 255) + +``V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_MEDIAN_FILTER_BOTTOM (integer (0-255))`` + Threshold above which the chroma median filter is enabled (default + 0) + +``V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_MEDIAN_FILTER_TOP (integer (0-255))`` + Threshold below which the chroma median filter is enabled (default + 255) + +``V4L2_CID_MPEG_CX2341X_STREAM_INSERT_NAV_PACKETS (boolean)`` + The CX2341X MPEG encoder can insert one empty MPEG-2 PES packet into + the stream between every four video frames. The packet size is 2048 + bytes, including the packet_start_code_prefix and stream_id + fields. The stream_id is 0xBF (private stream 2). The payload + consists of 0x00 bytes, to be filled in by the application. 0 = do + not insert, 1 = insert packets. + + +VPX Control Reference +--------------------- + +The VPX controls include controls for encoding parameters of VPx video +codec. + + +.. _vpx-control-id: + +VPX Control IDs +^^^^^^^^^^^^^^^ + +.. _v4l2-vpx-num-partitions: + +``V4L2_CID_MPEG_VIDEO_VPX_NUM_PARTITIONS`` + (enum) + +enum v4l2_vp8_num_partitions - + The number of token partitions to use in VP8 encoder. Possible + values are: + + + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + * - ``V4L2_CID_MPEG_VIDEO_VPX_1_PARTITION`` + - 1 coefficient partition + * - ``V4L2_CID_MPEG_VIDEO_VPX_2_PARTITIONS`` + - 2 coefficient partitions + * - ``V4L2_CID_MPEG_VIDEO_VPX_4_PARTITIONS`` + - 4 coefficient partitions + * - ``V4L2_CID_MPEG_VIDEO_VPX_8_PARTITIONS`` + - 8 coefficient partitions + + + +``V4L2_CID_MPEG_VIDEO_VPX_IMD_DISABLE_4X4 (boolean)`` + Setting this prevents intra 4x4 mode in the intra mode decision. + +.. _v4l2-vpx-num-ref-frames: + +``V4L2_CID_MPEG_VIDEO_VPX_NUM_REF_FRAMES`` + (enum) + +enum v4l2_vp8_num_ref_frames - + The number of reference pictures for encoding P frames. Possible + values are: + +.. tabularcolumns:: |p{7.9cm}|p{9.6cm}| + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + * - ``V4L2_CID_MPEG_VIDEO_VPX_1_REF_FRAME`` + - Last encoded frame will be searched + * - ``V4L2_CID_MPEG_VIDEO_VPX_2_REF_FRAME`` + - Two frames will be searched among the last encoded frame, the + golden frame and the alternate reference (altref) frame. The + encoder implementation will decide which two are chosen. + * - ``V4L2_CID_MPEG_VIDEO_VPX_3_REF_FRAME`` + - The last encoded frame, the golden frame and the altref frame will + be searched. + + + +``V4L2_CID_MPEG_VIDEO_VPX_FILTER_LEVEL (integer)`` + Indicates the loop filter level. The adjustment of the loop filter + level is done via a delta value against a baseline loop filter + value. + +``V4L2_CID_MPEG_VIDEO_VPX_FILTER_SHARPNESS (integer)`` + This parameter affects the loop filter. Anything above zero weakens + the deblocking effect on the loop filter. + +``V4L2_CID_MPEG_VIDEO_VPX_GOLDEN_FRAME_REF_PERIOD (integer)`` + Sets the refresh period for the golden frame. The period is defined + in number of frames. For a value of 'n', every nth frame starting + from the first key frame will be taken as a golden frame. For eg. + for encoding sequence of 0, 1, 2, 3, 4, 5, 6, 7 where the golden + frame refresh period is set as 4, the frames 0, 4, 8 etc will be + taken as the golden frames as frame 0 is always a key frame. + +.. _v4l2-vpx-golden-frame-sel: + +``V4L2_CID_MPEG_VIDEO_VPX_GOLDEN_FRAME_SEL`` + (enum) + +enum v4l2_vp8_golden_frame_sel - + Selects the golden frame for encoding. Possible values are: + +.. raw:: latex + + \footnotesize + +.. tabularcolumns:: |p{9.0cm}|p{8.0cm}| + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + * - ``V4L2_CID_MPEG_VIDEO_VPX_GOLDEN_FRAME_USE_PREV`` + - Use the (n-2)th frame as a golden frame, current frame index being + 'n'. + * - ``V4L2_CID_MPEG_VIDEO_VPX_GOLDEN_FRAME_USE_REF_PERIOD`` + - Use the previous specific frame indicated by + ``V4L2_CID_MPEG_VIDEO_VPX_GOLDEN_FRAME_REF_PERIOD`` as a + golden frame. + +.. raw:: latex + + \normalsize + + +``V4L2_CID_MPEG_VIDEO_VPX_MIN_QP (integer)`` + Minimum quantization parameter for VP8. + +``V4L2_CID_MPEG_VIDEO_VPX_MAX_QP (integer)`` + Maximum quantization parameter for VP8. + +``V4L2_CID_MPEG_VIDEO_VPX_I_FRAME_QP (integer)`` + Quantization parameter for an I frame for VP8. + +``V4L2_CID_MPEG_VIDEO_VPX_P_FRAME_QP (integer)`` + Quantization parameter for a P frame for VP8. + +.. _v4l2-mpeg-video-vp8-profile: + +``V4L2_CID_MPEG_VIDEO_VP8_PROFILE`` + (enum) + +enum v4l2_mpeg_video_vp8_profile - + This control allows selecting the profile for VP8 encoder. + This is also used to enumerate supported profiles by VP8 encoder or decoder. + Possible values are: + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + * - ``V4L2_MPEG_VIDEO_VP8_PROFILE_0`` + - Profile 0 + * - ``V4L2_MPEG_VIDEO_VP8_PROFILE_1`` + - Profile 1 + * - ``V4L2_MPEG_VIDEO_VP8_PROFILE_2`` + - Profile 2 + * - ``V4L2_MPEG_VIDEO_VP8_PROFILE_3`` + - Profile 3 + +.. _v4l2-mpeg-video-vp9-profile: + +``V4L2_CID_MPEG_VIDEO_VP9_PROFILE`` + (enum) + +enum v4l2_mpeg_video_vp9_profile - + This control allows selecting the profile for VP9 encoder. + This is also used to enumerate supported profiles by VP9 encoder or decoder. + Possible values are: + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + * - ``V4L2_MPEG_VIDEO_VP9_PROFILE_0`` + - Profile 0 + * - ``V4L2_MPEG_VIDEO_VP9_PROFILE_1`` + - Profile 1 + * - ``V4L2_MPEG_VIDEO_VP9_PROFILE_2`` + - Profile 2 + * - ``V4L2_MPEG_VIDEO_VP9_PROFILE_3`` + - Profile 3 + + +High Efficiency Video Coding (HEVC/H.265) Control Reference +----------------------------------------------------------- + +The HEVC/H.265 controls include controls for encoding parameters of HEVC/H.265 +video codec. + + +.. _hevc-control-id: + +HEVC/H.265 Control IDs +^^^^^^^^^^^^^^^^^^^^^^ + +``V4L2_CID_MPEG_VIDEO_HEVC_MIN_QP (integer)`` + Minimum quantization parameter for HEVC. + Valid range: from 0 to 51. + +``V4L2_CID_MPEG_VIDEO_HEVC_MAX_QP (integer)`` + Maximum quantization parameter for HEVC. + Valid range: from 0 to 51. + +``V4L2_CID_MPEG_VIDEO_HEVC_I_FRAME_QP (integer)`` + Quantization parameter for an I frame for HEVC. + Valid range: [V4L2_CID_MPEG_VIDEO_HEVC_MIN_QP, + V4L2_CID_MPEG_VIDEO_HEVC_MAX_QP]. + +``V4L2_CID_MPEG_VIDEO_HEVC_P_FRAME_QP (integer)`` + Quantization parameter for a P frame for HEVC. + Valid range: [V4L2_CID_MPEG_VIDEO_HEVC_MIN_QP, + V4L2_CID_MPEG_VIDEO_HEVC_MAX_QP]. + +``V4L2_CID_MPEG_VIDEO_HEVC_B_FRAME_QP (integer)`` + Quantization parameter for a B frame for HEVC. + Valid range: [V4L2_CID_MPEG_VIDEO_HEVC_MIN_QP, + V4L2_CID_MPEG_VIDEO_HEVC_MAX_QP]. + +``V4L2_CID_MPEG_VIDEO_HEVC_HIER_QP (boolean)`` + HIERARCHICAL_QP allows the host to specify the quantization parameter + values for each temporal layer through HIERARCHICAL_QP_LAYER. This is + valid only if HIERARCHICAL_CODING_LAYER is greater than 1. Setting the + control value to 1 enables setting of the QP values for the layers. + +.. _v4l2-hevc-hier-coding-type: + +``V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_TYPE`` + (enum) + +enum v4l2_mpeg_video_hevc_hier_coding_type - + Selects the hierarchical coding type for encoding. Possible values are: + +.. raw:: latex + + \footnotesize + +.. tabularcolumns:: |p{9.0cm}|p{8.0cm}| + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + * - ``V4L2_MPEG_VIDEO_HEVC_HIERARCHICAL_CODING_B`` + - Use the B frame for hierarchical coding. + * - ``V4L2_MPEG_VIDEO_HEVC_HIERARCHICAL_CODING_P`` + - Use the P frame for hierarchical coding. + +.. raw:: latex + + \normalsize + + +``V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_LAYER (integer)`` + Selects the hierarchical coding layer. In normal encoding + (non-hierarchial coding), it should be zero. Possible values are [0, 6]. + 0 indicates HIERARCHICAL CODING LAYER 0, 1 indicates HIERARCHICAL CODING + LAYER 1 and so on. + +``V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_L0_QP (integer)`` + Indicates quantization parameter for hierarchical coding layer 0. + Valid range: [V4L2_CID_MPEG_VIDEO_HEVC_MIN_QP, + V4L2_CID_MPEG_VIDEO_HEVC_MAX_QP]. + +``V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_L1_QP (integer)`` + Indicates quantization parameter for hierarchical coding layer 1. + Valid range: [V4L2_CID_MPEG_VIDEO_HEVC_MIN_QP, + V4L2_CID_MPEG_VIDEO_HEVC_MAX_QP]. + +``V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_L2_QP (integer)`` + Indicates quantization parameter for hierarchical coding layer 2. + Valid range: [V4L2_CID_MPEG_VIDEO_HEVC_MIN_QP, + V4L2_CID_MPEG_VIDEO_HEVC_MAX_QP]. + +``V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_L3_QP (integer)`` + Indicates quantization parameter for hierarchical coding layer 3. + Valid range: [V4L2_CID_MPEG_VIDEO_HEVC_MIN_QP, + V4L2_CID_MPEG_VIDEO_HEVC_MAX_QP]. + +``V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_L4_QP (integer)`` + Indicates quantization parameter for hierarchical coding layer 4. + Valid range: [V4L2_CID_MPEG_VIDEO_HEVC_MIN_QP, + V4L2_CID_MPEG_VIDEO_HEVC_MAX_QP]. + +``V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_L5_QP (integer)`` + Indicates quantization parameter for hierarchical coding layer 5. + Valid range: [V4L2_CID_MPEG_VIDEO_HEVC_MIN_QP, + V4L2_CID_MPEG_VIDEO_HEVC_MAX_QP]. + +``V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_L6_QP (integer)`` + Indicates quantization parameter for hierarchical coding layer 6. + Valid range: [V4L2_CID_MPEG_VIDEO_HEVC_MIN_QP, + V4L2_CID_MPEG_VIDEO_HEVC_MAX_QP]. + +.. _v4l2-hevc-profile: + +``V4L2_CID_MPEG_VIDEO_HEVC_PROFILE`` + (enum) + +enum v4l2_mpeg_video_hevc_profile - + Select the desired profile for HEVC encoder. + +.. raw:: latex + + \footnotesize + +.. tabularcolumns:: |p{9.0cm}|p{8.0cm}| + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + * - ``V4L2_MPEG_VIDEO_HEVC_PROFILE_MAIN`` + - Main profile. + * - ``V4L2_MPEG_VIDEO_HEVC_PROFILE_MAIN_STILL_PICTURE`` + - Main still picture profile. + * - ``V4L2_MPEG_VIDEO_HEVC_PROFILE_MAIN_10`` + - Main 10 profile. + +.. raw:: latex + + \normalsize + + +.. _v4l2-hevc-level: + +``V4L2_CID_MPEG_VIDEO_HEVC_LEVEL`` + (enum) + +enum v4l2_mpeg_video_hevc_level - + Selects the desired level for HEVC encoder. + +.. raw:: latex + + \footnotesize + +.. tabularcolumns:: |p{9.0cm}|p{8.0cm}| + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_1`` + - Level 1.0 + * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_2`` + - Level 2.0 + * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_2_1`` + - Level 2.1 + * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_3`` + - Level 3.0 + * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_3_1`` + - Level 3.1 + * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_4`` + - Level 4.0 + * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_4_1`` + - Level 4.1 + * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_5`` + - Level 5.0 + * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_5_1`` + - Level 5.1 + * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_5_2`` + - Level 5.2 + * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_6`` + - Level 6.0 + * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_6_1`` + - Level 6.1 + * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_6_2`` + - Level 6.2 + +.. raw:: latex + + \normalsize + + +``V4L2_CID_MPEG_VIDEO_HEVC_FRAME_RATE_RESOLUTION (integer)`` + Indicates the number of evenly spaced subintervals, called ticks, within + one second. This is a 16 bit unsigned integer and has a maximum value up to + 0xffff and a minimum value of 1. + +.. _v4l2-hevc-tier: + +``V4L2_CID_MPEG_VIDEO_HEVC_TIER`` + (enum) + +enum v4l2_mpeg_video_hevc_tier - + TIER_FLAG specifies tiers information of the HEVC encoded picture. Tier + were made to deal with applications that differ in terms of maximum bit + rate. Setting the flag to 0 selects HEVC tier as Main tier and setting + this flag to 1 indicates High tier. High tier is for applications requiring + high bit rates. + +.. raw:: latex + + \footnotesize + +.. tabularcolumns:: |p{9.0cm}|p{8.0cm}| + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + * - ``V4L2_MPEG_VIDEO_HEVC_TIER_MAIN`` + - Main tier. + * - ``V4L2_MPEG_VIDEO_HEVC_TIER_HIGH`` + - High tier. + +.. raw:: latex + + \normalsize + + +``V4L2_CID_MPEG_VIDEO_HEVC_MAX_PARTITION_DEPTH (integer)`` + Selects HEVC maximum coding unit depth. + +.. _v4l2-hevc-loop-filter-mode: + +``V4L2_CID_MPEG_VIDEO_HEVC_LOOP_FILTER_MODE`` + (enum) + +enum v4l2_mpeg_video_hevc_loop_filter_mode - + Loop filter mode for HEVC encoder. Possible values are: + +.. raw:: latex + + \footnotesize + +.. tabularcolumns:: |p{10.7cm}|p{6.3cm}| + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + * - ``V4L2_MPEG_VIDEO_HEVC_LOOP_FILTER_MODE_DISABLED`` + - Loop filter is disabled. + * - ``V4L2_MPEG_VIDEO_HEVC_LOOP_FILTER_MODE_ENABLED`` + - Loop filter is enabled. + * - ``V4L2_MPEG_VIDEO_HEVC_LOOP_FILTER_MODE_DISABLED_AT_SLICE_BOUNDARY`` + - Loop filter is disabled at the slice boundary. + +.. raw:: latex + + \normalsize + + +``V4L2_CID_MPEG_VIDEO_HEVC_LF_BETA_OFFSET_DIV2 (integer)`` + Selects HEVC loop filter beta offset. The valid range is [-6, +6]. + +``V4L2_CID_MPEG_VIDEO_HEVC_LF_TC_OFFSET_DIV2 (integer)`` + Selects HEVC loop filter tc offset. The valid range is [-6, +6]. + +.. _v4l2-hevc-refresh-type: + +``V4L2_CID_MPEG_VIDEO_HEVC_REFRESH_TYPE`` + (enum) + +enum v4l2_mpeg_video_hevc_hier_refresh_type - + Selects refresh type for HEVC encoder. + Host has to specify the period into + V4L2_CID_MPEG_VIDEO_HEVC_REFRESH_PERIOD. + +.. raw:: latex + + \footnotesize + +.. tabularcolumns:: |p{8.0cm}|p{9.0cm}| + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + * - ``V4L2_MPEG_VIDEO_HEVC_REFRESH_NONE`` + - Use the B frame for hierarchical coding. + * - ``V4L2_MPEG_VIDEO_HEVC_REFRESH_CRA`` + - Use CRA (Clean Random Access Unit) picture encoding. + * - ``V4L2_MPEG_VIDEO_HEVC_REFRESH_IDR`` + - Use IDR (Instantaneous Decoding Refresh) picture encoding. + +.. raw:: latex + + \normalsize + + +``V4L2_CID_MPEG_VIDEO_HEVC_REFRESH_PERIOD (integer)`` + Selects the refresh period for HEVC encoder. + This specifies the number of I pictures between two CRA/IDR pictures. + This is valid only if REFRESH_TYPE is not 0. + +``V4L2_CID_MPEG_VIDEO_HEVC_LOSSLESS_CU (boolean)`` + Indicates HEVC lossless encoding. Setting it to 0 disables lossless + encoding. Setting it to 1 enables lossless encoding. + +``V4L2_CID_MPEG_VIDEO_HEVC_CONST_INTRA_PRED (boolean)`` + Indicates constant intra prediction for HEVC encoder. Specifies the + constrained intra prediction in which intra largest coding unit (LCU) + prediction is performed by using residual data and decoded samples of + neighboring intra LCU only. Setting the value to 1 enables constant intra + prediction and setting the value to 0 disables constant intra prediction. + +``V4L2_CID_MPEG_VIDEO_HEVC_WAVEFRONT (boolean)`` + Indicates wavefront parallel processing for HEVC encoder. Setting it to 0 + disables the feature and setting it to 1 enables the wavefront parallel + processing. + +``V4L2_CID_MPEG_VIDEO_HEVC_GENERAL_PB (boolean)`` + Setting the value to 1 enables combination of P and B frame for HEVC + encoder. + +``V4L2_CID_MPEG_VIDEO_HEVC_TEMPORAL_ID (boolean)`` + Indicates temporal identifier for HEVC encoder which is enabled by + setting the value to 1. + +``V4L2_CID_MPEG_VIDEO_HEVC_STRONG_SMOOTHING (boolean)`` + Indicates bi-linear interpolation is conditionally used in the intra + prediction filtering process in the CVS when set to 1. Indicates bi-linear + interpolation is not used in the CVS when set to 0. + +``V4L2_CID_MPEG_VIDEO_HEVC_MAX_NUM_MERGE_MV_MINUS1 (integer)`` + Indicates maximum number of merge candidate motion vectors. + Values are from 0 to 4. + +``V4L2_CID_MPEG_VIDEO_HEVC_TMV_PREDICTION (boolean)`` + Indicates temporal motion vector prediction for HEVC encoder. Setting it to + 1 enables the prediction. Setting it to 0 disables the prediction. + +``V4L2_CID_MPEG_VIDEO_HEVC_WITHOUT_STARTCODE (boolean)`` + Specifies if HEVC generates a stream with a size of the length field + instead of start code pattern. The size of the length field is configurable + through the V4L2_CID_MPEG_VIDEO_HEVC_SIZE_OF_LENGTH_FIELD control. Setting + the value to 0 disables encoding without startcode pattern. Setting the + value to 1 will enables encoding without startcode pattern. + +.. _v4l2-hevc-size-of-length-field: + +``V4L2_CID_MPEG_VIDEO_HEVC_SIZE_OF_LENGTH_FIELD`` +(enum) + +enum v4l2_mpeg_video_hevc_size_of_length_field - + Indicates the size of length field. + This is valid when encoding WITHOUT_STARTCODE_ENABLE is enabled. + +.. raw:: latex + + \footnotesize + +.. tabularcolumns:: |p{6.0cm}|p{11.0cm}| + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + * - ``V4L2_MPEG_VIDEO_HEVC_SIZE_0`` + - Generate start code pattern (Normal). + * - ``V4L2_MPEG_VIDEO_HEVC_SIZE_1`` + - Generate size of length field instead of start code pattern and length is 1. + * - ``V4L2_MPEG_VIDEO_HEVC_SIZE_2`` + - Generate size of length field instead of start code pattern and length is 2. + * - ``V4L2_MPEG_VIDEO_HEVC_SIZE_4`` + - Generate size of length field instead of start code pattern and length is 4. + +.. raw:: latex + + \normalsize + +``V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_L0_BR (integer)`` + Indicates bit rate for hierarchical coding layer 0 for HEVC encoder. + +``V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_L1_BR (integer)`` + Indicates bit rate for hierarchical coding layer 1 for HEVC encoder. + +``V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_L2_BR (integer)`` + Indicates bit rate for hierarchical coding layer 2 for HEVC encoder. + +``V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_L3_BR (integer)`` + Indicates bit rate for hierarchical coding layer 3 for HEVC encoder. + +``V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_L4_BR (integer)`` + Indicates bit rate for hierarchical coding layer 4 for HEVC encoder. + +``V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_L5_BR (integer)`` + Indicates bit rate for hierarchical coding layer 5 for HEVC encoder. + +``V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_L6_BR (integer)`` + Indicates bit rate for hierarchical coding layer 6 for HEVC encoder. + +``V4L2_CID_MPEG_VIDEO_REF_NUMBER_FOR_PFRAMES (integer)`` + Selects number of P reference pictures required for HEVC encoder. + P-Frame can use 1 or 2 frames for reference. + +``V4L2_CID_MPEG_VIDEO_PREPEND_SPSPPS_TO_IDR (integer)`` + Indicates whether to generate SPS and PPS at every IDR. Setting it to 0 + disables generating SPS and PPS at every IDR. Setting it to one enables + generating SPS and PPS at every IDR. + + +.. _camera-controls: + +Camera Control Reference +======================== + +The Camera class includes controls for mechanical (or equivalent +digital) features of a device such as controllable lenses or sensors. + + +.. _camera-control-id: + +Camera Control IDs +------------------ + +``V4L2_CID_CAMERA_CLASS (class)`` + The Camera class descriptor. Calling + :ref:`VIDIOC_QUERYCTRL` for this control will + return a description of this control class. + +.. _v4l2-exposure-auto-type: + +``V4L2_CID_EXPOSURE_AUTO`` + (enum) + +enum v4l2_exposure_auto_type - + Enables automatic adjustments of the exposure time and/or iris + aperture. The effect of manual changes of the exposure time or iris + aperture while these features are enabled is undefined, drivers + should ignore such requests. Possible values are: + + + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + * - ``V4L2_EXPOSURE_AUTO`` + - Automatic exposure time, automatic iris aperture. + * - ``V4L2_EXPOSURE_MANUAL`` + - Manual exposure time, manual iris. + * - ``V4L2_EXPOSURE_SHUTTER_PRIORITY`` + - Manual exposure time, auto iris. + * - ``V4L2_EXPOSURE_APERTURE_PRIORITY`` + - Auto exposure time, manual iris. + + + +``V4L2_CID_EXPOSURE_ABSOLUTE (integer)`` + Determines the exposure time of the camera sensor. The exposure time + is limited by the frame interval. Drivers should interpret the + values as 100 µs units, where the value 1 stands for 1/10000th of a + second, 10000 for 1 second and 100000 for 10 seconds. + +``V4L2_CID_EXPOSURE_AUTO_PRIORITY (boolean)`` + When ``V4L2_CID_EXPOSURE_AUTO`` is set to ``AUTO`` or + ``APERTURE_PRIORITY``, this control determines if the device may + dynamically vary the frame rate. By default this feature is disabled + (0) and the frame rate must remain constant. + +``V4L2_CID_AUTO_EXPOSURE_BIAS (integer menu)`` + Determines the automatic exposure compensation, it is effective only + when ``V4L2_CID_EXPOSURE_AUTO`` control is set to ``AUTO``, + ``SHUTTER_PRIORITY`` or ``APERTURE_PRIORITY``. It is expressed in + terms of EV, drivers should interpret the values as 0.001 EV units, + where the value 1000 stands for +1 EV. + + Increasing the exposure compensation value is equivalent to + decreasing the exposure value (EV) and will increase the amount of + light at the image sensor. The camera performs the exposure + compensation by adjusting absolute exposure time and/or aperture. + +.. _v4l2-exposure-metering: + +``V4L2_CID_EXPOSURE_METERING`` + (enum) + +enum v4l2_exposure_metering - + Determines how the camera measures the amount of light available for + the frame exposure. Possible values are: + +.. tabularcolumns:: |p{8.5cm}|p{9.0cm}| + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + * - ``V4L2_EXPOSURE_METERING_AVERAGE`` + - Use the light information coming from the entire frame and average + giving no weighting to any particular portion of the metered area. + * - ``V4L2_EXPOSURE_METERING_CENTER_WEIGHTED`` + - Average the light information coming from the entire frame giving + priority to the center of the metered area. + * - ``V4L2_EXPOSURE_METERING_SPOT`` + - Measure only very small area at the center of the frame. + * - ``V4L2_EXPOSURE_METERING_MATRIX`` + - A multi-zone metering. The light intensity is measured in several + points of the frame and the results are combined. The algorithm of + the zones selection and their significance in calculating the + final value is device dependent. + + + +``V4L2_CID_PAN_RELATIVE (integer)`` + This control turns the camera horizontally by the specified amount. + The unit is undefined. A positive value moves the camera to the + right (clockwise when viewed from above), a negative value to the + left. A value of zero does not cause motion. This is a write-only + control. + +``V4L2_CID_TILT_RELATIVE (integer)`` + This control turns the camera vertically by the specified amount. + The unit is undefined. A positive value moves the camera up, a + negative value down. A value of zero does not cause motion. This is + a write-only control. + +``V4L2_CID_PAN_RESET (button)`` + When this control is set, the camera moves horizontally to the + default position. + +``V4L2_CID_TILT_RESET (button)`` + When this control is set, the camera moves vertically to the default + position. + +``V4L2_CID_PAN_ABSOLUTE (integer)`` + This control turns the camera horizontally to the specified + position. Positive values move the camera to the right (clockwise + when viewed from above), negative values to the left. Drivers should + interpret the values as arc seconds, with valid values between -180 + * 3600 and +180 * 3600 inclusive. + +``V4L2_CID_TILT_ABSOLUTE (integer)`` + This control turns the camera vertically to the specified position. + Positive values move the camera up, negative values down. Drivers + should interpret the values as arc seconds, with valid values + between -180 * 3600 and +180 * 3600 inclusive. + +``V4L2_CID_FOCUS_ABSOLUTE (integer)`` + This control sets the focal point of the camera to the specified + position. The unit is undefined. Positive values set the focus + closer to the camera, negative values towards infinity. + +``V4L2_CID_FOCUS_RELATIVE (integer)`` + This control moves the focal point of the camera by the specified + amount. The unit is undefined. Positive values move the focus closer + to the camera, negative values towards infinity. This is a + write-only control. + +``V4L2_CID_FOCUS_AUTO (boolean)`` + Enables continuous automatic focus adjustments. The effect of manual + focus adjustments while this feature is enabled is undefined, + drivers should ignore such requests. + +``V4L2_CID_AUTO_FOCUS_START (button)`` + Starts single auto focus process. The effect of setting this control + when ``V4L2_CID_FOCUS_AUTO`` is set to ``TRUE`` (1) is undefined, + drivers should ignore such requests. + +``V4L2_CID_AUTO_FOCUS_STOP (button)`` + Aborts automatic focusing started with ``V4L2_CID_AUTO_FOCUS_START`` + control. It is effective only when the continuous autofocus is + disabled, that is when ``V4L2_CID_FOCUS_AUTO`` control is set to + ``FALSE`` (0). + +.. _v4l2-auto-focus-status: + +``V4L2_CID_AUTO_FOCUS_STATUS (bitmask)`` + The automatic focus status. This is a read-only control. + + Setting ``V4L2_LOCK_FOCUS`` lock bit of the ``V4L2_CID_3A_LOCK`` + control may stop updates of the ``V4L2_CID_AUTO_FOCUS_STATUS`` + control value. + +.. tabularcolumns:: |p{6.5cm}|p{11.0cm}| + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + * - ``V4L2_AUTO_FOCUS_STATUS_IDLE`` + - Automatic focus is not active. + * - ``V4L2_AUTO_FOCUS_STATUS_BUSY`` + - Automatic focusing is in progress. + * - ``V4L2_AUTO_FOCUS_STATUS_REACHED`` + - Focus has been reached. + * - ``V4L2_AUTO_FOCUS_STATUS_FAILED`` + - Automatic focus has failed, the driver will not transition from + this state until another action is performed by an application. + + + +.. _v4l2-auto-focus-range: + +``V4L2_CID_AUTO_FOCUS_RANGE`` + (enum) + +enum v4l2_auto_focus_range - + Determines auto focus distance range for which lens may be adjusted. + +.. tabularcolumns:: |p{6.5cm}|p{11.0cm}| + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + * - ``V4L2_AUTO_FOCUS_RANGE_AUTO`` + - The camera automatically selects the focus range. + * - ``V4L2_AUTO_FOCUS_RANGE_NORMAL`` + - Normal distance range, limited for best automatic focus + performance. + * - ``V4L2_AUTO_FOCUS_RANGE_MACRO`` + - Macro (close-up) auto focus. The camera will use its minimum + possible distance for auto focus. + * - ``V4L2_AUTO_FOCUS_RANGE_INFINITY`` + - The lens is set to focus on an object at infinite distance. + + + +``V4L2_CID_ZOOM_ABSOLUTE (integer)`` + Specify the objective lens focal length as an absolute value. The + zoom unit is driver-specific and its value should be a positive + integer. + +``V4L2_CID_ZOOM_RELATIVE (integer)`` + Specify the objective lens focal length relatively to the current + value. Positive values move the zoom lens group towards the + telephoto direction, negative values towards the wide-angle + direction. The zoom unit is driver-specific. This is a write-only + control. + +``V4L2_CID_ZOOM_CONTINUOUS (integer)`` + Move the objective lens group at the specified speed until it + reaches physical device limits or until an explicit request to stop + the movement. A positive value moves the zoom lens group towards the + telephoto direction. A value of zero stops the zoom lens group + movement. A negative value moves the zoom lens group towards the + wide-angle direction. The zoom speed unit is driver-specific. + +``V4L2_CID_IRIS_ABSOLUTE (integer)`` + This control sets the camera's aperture to the specified value. The + unit is undefined. Larger values open the iris wider, smaller values + close it. + +``V4L2_CID_IRIS_RELATIVE (integer)`` + This control modifies the camera's aperture by the specified amount. + The unit is undefined. Positive values open the iris one step + further, negative values close it one step further. This is a + write-only control. + +``V4L2_CID_PRIVACY (boolean)`` + Prevent video from being acquired by the camera. When this control + is set to ``TRUE`` (1), no image can be captured by the camera. + Common means to enforce privacy are mechanical obturation of the + sensor and firmware image processing, but the device is not + restricted to these methods. Devices that implement the privacy + control must support read access and may support write access. + +``V4L2_CID_BAND_STOP_FILTER (integer)`` + Switch the band-stop filter of a camera sensor on or off, or specify + its strength. Such band-stop filters can be used, for example, to + filter out the fluorescent light component. + +.. _v4l2-auto-n-preset-white-balance: + +``V4L2_CID_AUTO_N_PRESET_WHITE_BALANCE`` + (enum) + +enum v4l2_auto_n_preset_white_balance - + Sets white balance to automatic, manual or a preset. The presets + determine color temperature of the light as a hint to the camera for + white balance adjustments resulting in most accurate color + representation. The following white balance presets are listed in + order of increasing color temperature. + +.. tabularcolumns:: |p{7.0 cm}|p{10.5cm}| + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + * - ``V4L2_WHITE_BALANCE_MANUAL`` + - Manual white balance. + * - ``V4L2_WHITE_BALANCE_AUTO`` + - Automatic white balance adjustments. + * - ``V4L2_WHITE_BALANCE_INCANDESCENT`` + - White balance setting for incandescent (tungsten) lighting. It + generally cools down the colors and corresponds approximately to + 2500...3500 K color temperature range. + * - ``V4L2_WHITE_BALANCE_FLUORESCENT`` + - White balance preset for fluorescent lighting. It corresponds + approximately to 4000...5000 K color temperature. + * - ``V4L2_WHITE_BALANCE_FLUORESCENT_H`` + - With this setting the camera will compensate for fluorescent H + lighting. + * - ``V4L2_WHITE_BALANCE_HORIZON`` + - White balance setting for horizon daylight. It corresponds + approximately to 5000 K color temperature. + * - ``V4L2_WHITE_BALANCE_DAYLIGHT`` + - White balance preset for daylight (with clear sky). It corresponds + approximately to 5000...6500 K color temperature. + * - ``V4L2_WHITE_BALANCE_FLASH`` + - With this setting the camera will compensate for the flash light. + It slightly warms up the colors and corresponds roughly to + 5000...5500 K color temperature. + * - ``V4L2_WHITE_BALANCE_CLOUDY`` + - White balance preset for moderately overcast sky. This option + corresponds approximately to 6500...8000 K color temperature + range. + * - ``V4L2_WHITE_BALANCE_SHADE`` + - White balance preset for shade or heavily overcast sky. It + corresponds approximately to 9000...10000 K color temperature. + + + +.. _v4l2-wide-dynamic-range: + +``V4L2_CID_WIDE_DYNAMIC_RANGE (boolean)`` + Enables or disables the camera's wide dynamic range feature. This + feature allows to obtain clear images in situations where intensity + of the illumination varies significantly throughout the scene, i.e. + there are simultaneously very dark and very bright areas. It is most + commonly realized in cameras by combining two subsequent frames with + different exposure times. [#f1]_ + +.. _v4l2-image-stabilization: + +``V4L2_CID_IMAGE_STABILIZATION (boolean)`` + Enables or disables image stabilization. + +``V4L2_CID_ISO_SENSITIVITY (integer menu)`` + Determines ISO equivalent of an image sensor indicating the sensor's + sensitivity to light. The numbers are expressed in arithmetic scale, + as per :ref:`iso12232` standard, where doubling the sensor + sensitivity is represented by doubling the numerical ISO value. + Applications should interpret the values as standard ISO values + multiplied by 1000, e.g. control value 800 stands for ISO 0.8. + Drivers will usually support only a subset of standard ISO values. + The effect of setting this control while the + ``V4L2_CID_ISO_SENSITIVITY_AUTO`` control is set to a value other + than ``V4L2_CID_ISO_SENSITIVITY_MANUAL`` is undefined, drivers + should ignore such requests. + +.. _v4l2-iso-sensitivity-auto-type: + +``V4L2_CID_ISO_SENSITIVITY_AUTO`` + (enum) + +enum v4l2_iso_sensitivity_type - + Enables or disables automatic ISO sensitivity adjustments. + + + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + * - ``V4L2_CID_ISO_SENSITIVITY_MANUAL`` + - Manual ISO sensitivity. + * - ``V4L2_CID_ISO_SENSITIVITY_AUTO`` + - Automatic ISO sensitivity adjustments. + + + +.. _v4l2-scene-mode: + +``V4L2_CID_SCENE_MODE`` + (enum) + +enum v4l2_scene_mode - + This control allows to select scene programs as the camera automatic + modes optimized for common shooting scenes. Within these modes the + camera determines best exposure, aperture, focusing, light metering, + white balance and equivalent sensitivity. The controls of those + parameters are influenced by the scene mode control. An exact + behavior in each mode is subject to the camera specification. + + When the scene mode feature is not used, this control should be set + to ``V4L2_SCENE_MODE_NONE`` to make sure the other possibly related + controls are accessible. The following scene programs are defined: + +.. tabularcolumns:: |p{6.0cm}|p{11.5cm}| + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + * - ``V4L2_SCENE_MODE_NONE`` + - The scene mode feature is disabled. + * - ``V4L2_SCENE_MODE_BACKLIGHT`` + - Backlight. Compensates for dark shadows when light is coming from + behind a subject, also by automatically turning on the flash. + * - ``V4L2_SCENE_MODE_BEACH_SNOW`` + - Beach and snow. This mode compensates for all-white or bright + scenes, which tend to look gray and low contrast, when camera's + automatic exposure is based on an average scene brightness. To + compensate, this mode automatically slightly overexposes the + frames. The white balance may also be adjusted to compensate for + the fact that reflected snow looks bluish rather than white. + * - ``V4L2_SCENE_MODE_CANDLELIGHT`` + - Candle light. The camera generally raises the ISO sensitivity and + lowers the shutter speed. This mode compensates for relatively + close subject in the scene. The flash is disabled in order to + preserve the ambiance of the light. + * - ``V4L2_SCENE_MODE_DAWN_DUSK`` + - Dawn and dusk. Preserves the colors seen in low natural light + before dusk and after down. The camera may turn off the flash, and + automatically focus at infinity. It will usually boost saturation + and lower the shutter speed. + * - ``V4L2_SCENE_MODE_FALL_COLORS`` + - Fall colors. Increases saturation and adjusts white balance for + color enhancement. Pictures of autumn leaves get saturated reds + and yellows. + * - ``V4L2_SCENE_MODE_FIREWORKS`` + - Fireworks. Long exposure times are used to capture the expanding + burst of light from a firework. The camera may invoke image + stabilization. + * - ``V4L2_SCENE_MODE_LANDSCAPE`` + - Landscape. The camera may choose a small aperture to provide deep + depth of field and long exposure duration to help capture detail + in dim light conditions. The focus is fixed at infinity. Suitable + for distant and wide scenery. + * - ``V4L2_SCENE_MODE_NIGHT`` + - Night, also known as Night Landscape. Designed for low light + conditions, it preserves detail in the dark areas without blowing + out bright objects. The camera generally sets itself to a + medium-to-high ISO sensitivity, with a relatively long exposure + time, and turns flash off. As such, there will be increased image + noise and the possibility of blurred image. + * - ``V4L2_SCENE_MODE_PARTY_INDOOR`` + - Party and indoor. Designed to capture indoor scenes that are lit + by indoor background lighting as well as the flash. The camera + usually increases ISO sensitivity, and adjusts exposure for the + low light conditions. + * - ``V4L2_SCENE_MODE_PORTRAIT`` + - Portrait. The camera adjusts the aperture so that the depth of + field is reduced, which helps to isolate the subject against a + smooth background. Most cameras recognize the presence of faces in + the scene and focus on them. The color hue is adjusted to enhance + skin tones. The intensity of the flash is often reduced. + * - ``V4L2_SCENE_MODE_SPORTS`` + - Sports. Significantly increases ISO and uses a fast shutter speed + to freeze motion of rapidly-moving subjects. Increased image noise + may be seen in this mode. + * - ``V4L2_SCENE_MODE_SUNSET`` + - Sunset. Preserves deep hues seen in sunsets and sunrises. It bumps + up the saturation. + * - ``V4L2_SCENE_MODE_TEXT`` + - Text. It applies extra contrast and sharpness, it is typically a + black-and-white mode optimized for readability. Automatic focus + may be switched to close-up mode and this setting may also involve + some lens-distortion correction. + + + +``V4L2_CID_3A_LOCK (bitmask)`` + This control locks or unlocks the automatic focus, exposure and + white balance. The automatic adjustments can be paused independently + by setting the corresponding lock bit to 1. The camera then retains + the settings until the lock bit is cleared. The following lock bits + are defined: + + When a given algorithm is not enabled, drivers should ignore + requests to lock it and should return no error. An example might be + an application setting bit ``V4L2_LOCK_WHITE_BALANCE`` when the + ``V4L2_CID_AUTO_WHITE_BALANCE`` control is set to ``FALSE``. The + value of this control may be changed by exposure, white balance or + focus controls. + + + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + * - ``V4L2_LOCK_EXPOSURE`` + - Automatic exposure adjustments lock. + * - ``V4L2_LOCK_WHITE_BALANCE`` + - Automatic white balance adjustments lock. + * - ``V4L2_LOCK_FOCUS`` + - Automatic focus lock. + + + +``V4L2_CID_PAN_SPEED (integer)`` + This control turns the camera horizontally at the specific speed. + The unit is undefined. A positive value moves the camera to the + right (clockwise when viewed from above), a negative value to the + left. A value of zero stops the motion if one is in progress and has + no effect otherwise. + +``V4L2_CID_TILT_SPEED (integer)`` + This control turns the camera vertically at the specified speed. The + unit is undefined. A positive value moves the camera up, a negative + value down. A value of zero stops the motion if one is in progress + and has no effect otherwise. + + +.. _fm-tx-controls: + +FM Transmitter Control Reference +================================ + +The FM Transmitter (FM_TX) class includes controls for common features +of FM transmissions capable devices. Currently this class includes +parameters for audio compression, pilot tone generation, audio deviation +limiter, RDS transmission and tuning power features. + + +.. _fm-tx-control-id: + +FM_TX Control IDs +----------------- + +``V4L2_CID_FM_TX_CLASS (class)`` + The FM_TX class descriptor. Calling + :ref:`VIDIOC_QUERYCTRL` for this control will + return a description of this control class. + +``V4L2_CID_RDS_TX_DEVIATION (integer)`` + Configures RDS signal frequency deviation level in Hz. The range and + step are driver-specific. + +``V4L2_CID_RDS_TX_PI (integer)`` + Sets the RDS Programme Identification field for transmission. + +``V4L2_CID_RDS_TX_PTY (integer)`` + Sets the RDS Programme Type field for transmission. This encodes up + to 31 pre-defined programme types. + +``V4L2_CID_RDS_TX_PS_NAME (string)`` + Sets the Programme Service name (PS_NAME) for transmission. It is + intended for static display on a receiver. It is the primary aid to + listeners in programme service identification and selection. In + Annex E of :ref:`iec62106`, the RDS specification, there is a full + description of the correct character encoding for Programme Service + name strings. Also from RDS specification, PS is usually a single + eight character text. However, it is also possible to find receivers + which can scroll strings sized as 8 x N characters. So, this control + must be configured with steps of 8 characters. The result is it must + always contain a string with size multiple of 8. + +``V4L2_CID_RDS_TX_RADIO_TEXT (string)`` + Sets the Radio Text info for transmission. It is a textual + description of what is being broadcasted. RDS Radio Text can be + applied when broadcaster wishes to transmit longer PS names, + programme-related information or any other text. In these cases, + RadioText should be used in addition to ``V4L2_CID_RDS_TX_PS_NAME``. + The encoding for Radio Text strings is also fully described in Annex + E of :ref:`iec62106`. The length of Radio Text strings depends on + which RDS Block is being used to transmit it, either 32 (2A block) + or 64 (2B block). However, it is also possible to find receivers + which can scroll strings sized as 32 x N or 64 x N characters. So, + this control must be configured with steps of 32 or 64 characters. + The result is it must always contain a string with size multiple of + 32 or 64. + +``V4L2_CID_RDS_TX_MONO_STEREO (boolean)`` + Sets the Mono/Stereo bit of the Decoder Identification code. If set, + then the audio was recorded as stereo. + +``V4L2_CID_RDS_TX_ARTIFICIAL_HEAD (boolean)`` + Sets the + `Artificial Head <http://en.wikipedia.org/wiki/Artificial_head>`__ + bit of the Decoder Identification code. If set, then the audio was + recorded using an artificial head. + +``V4L2_CID_RDS_TX_COMPRESSED (boolean)`` + Sets the Compressed bit of the Decoder Identification code. If set, + then the audio is compressed. + +``V4L2_CID_RDS_TX_DYNAMIC_PTY (boolean)`` + Sets the Dynamic PTY bit of the Decoder Identification code. If set, + then the PTY code is dynamically switched. + +``V4L2_CID_RDS_TX_TRAFFIC_ANNOUNCEMENT (boolean)`` + If set, then a traffic announcement is in progress. + +``V4L2_CID_RDS_TX_TRAFFIC_PROGRAM (boolean)`` + If set, then the tuned programme carries traffic announcements. + +``V4L2_CID_RDS_TX_MUSIC_SPEECH (boolean)`` + If set, then this channel broadcasts music. If cleared, then it + broadcasts speech. If the transmitter doesn't make this distinction, + then it should be set. + +``V4L2_CID_RDS_TX_ALT_FREQS_ENABLE (boolean)`` + If set, then transmit alternate frequencies. + +``V4L2_CID_RDS_TX_ALT_FREQS (__u32 array)`` + The alternate frequencies in kHz units. The RDS standard allows for + up to 25 frequencies to be defined. Drivers may support fewer + frequencies so check the array size. + +``V4L2_CID_AUDIO_LIMITER_ENABLED (boolean)`` + Enables or disables the audio deviation limiter feature. The limiter + is useful when trying to maximize the audio volume, minimize + receiver-generated distortion and prevent overmodulation. + +``V4L2_CID_AUDIO_LIMITER_RELEASE_TIME (integer)`` + Sets the audio deviation limiter feature release time. Unit is in + useconds. Step and range are driver-specific. + +``V4L2_CID_AUDIO_LIMITER_DEVIATION (integer)`` + Configures audio frequency deviation level in Hz. The range and step + are driver-specific. + +``V4L2_CID_AUDIO_COMPRESSION_ENABLED (boolean)`` + Enables or disables the audio compression feature. This feature + amplifies signals below the threshold by a fixed gain and compresses + audio signals above the threshold by the ratio of Threshold/(Gain + + Threshold). + +``V4L2_CID_AUDIO_COMPRESSION_GAIN (integer)`` + Sets the gain for audio compression feature. It is a dB value. The + range and step are driver-specific. + +``V4L2_CID_AUDIO_COMPRESSION_THRESHOLD (integer)`` + Sets the threshold level for audio compression freature. It is a dB + value. The range and step are driver-specific. + +``V4L2_CID_AUDIO_COMPRESSION_ATTACK_TIME (integer)`` + Sets the attack time for audio compression feature. It is a useconds + value. The range and step are driver-specific. + +``V4L2_CID_AUDIO_COMPRESSION_RELEASE_TIME (integer)`` + Sets the release time for audio compression feature. It is a + useconds value. The range and step are driver-specific. + +``V4L2_CID_PILOT_TONE_ENABLED (boolean)`` + Enables or disables the pilot tone generation feature. + +``V4L2_CID_PILOT_TONE_DEVIATION (integer)`` + Configures pilot tone frequency deviation level. Unit is in Hz. The + range and step are driver-specific. + +``V4L2_CID_PILOT_TONE_FREQUENCY (integer)`` + Configures pilot tone frequency value. Unit is in Hz. The range and + step are driver-specific. + +``V4L2_CID_TUNE_PREEMPHASIS`` + (enum) + +enum v4l2_preemphasis - + Configures the pre-emphasis value for broadcasting. A pre-emphasis + filter is applied to the broadcast to accentuate the high audio + frequencies. Depending on the region, a time constant of either 50 + or 75 useconds is used. The enum v4l2_preemphasis defines possible + values for pre-emphasis. Here they are: + + + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + * - ``V4L2_PREEMPHASIS_DISABLED`` + - No pre-emphasis is applied. + * - ``V4L2_PREEMPHASIS_50_uS`` + - A pre-emphasis of 50 uS is used. + * - ``V4L2_PREEMPHASIS_75_uS`` + - A pre-emphasis of 75 uS is used. + + + +``V4L2_CID_TUNE_POWER_LEVEL (integer)`` + Sets the output power level for signal transmission. Unit is in + dBuV. Range and step are driver-specific. + +``V4L2_CID_TUNE_ANTENNA_CAPACITOR (integer)`` + This selects the value of antenna tuning capacitor manually or + automatically if set to zero. Unit, range and step are + driver-specific. + +For more details about RDS specification, refer to :ref:`iec62106` +document, from CENELEC. + + +.. _flash-controls: + +Flash Control Reference +======================= + +The V4L2 flash controls are intended to provide generic access to flash +controller devices. Flash controller devices are typically used in +digital cameras. + +The interface can support both LED and xenon flash devices. As of +writing this, there is no xenon flash driver using this interface. + + +.. _flash-controls-use-cases: + +Supported use cases +------------------- + + +Unsynchronised LED flash (software strobe) +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +Unsynchronised LED flash is controlled directly by the host as the +sensor. The flash must be enabled by the host before the exposure of the +image starts and disabled once it ends. The host is fully responsible +for the timing of the flash. + +Example of such device: Nokia N900. + + +Synchronised LED flash (hardware strobe) +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +The synchronised LED flash is pre-programmed by the host (power and +timeout) but controlled by the sensor through a strobe signal from the +sensor to the flash. + +The sensor controls the flash duration and timing. This information +typically must be made available to the sensor. + + +LED flash as torch +^^^^^^^^^^^^^^^^^^ + +LED flash may be used as torch in conjunction with another use case +involving camera or individually. + + +.. _flash-control-id: + +Flash Control IDs +""""""""""""""""" + +``V4L2_CID_FLASH_CLASS (class)`` + The FLASH class descriptor. + +``V4L2_CID_FLASH_LED_MODE (menu)`` + Defines the mode of the flash LED, the high-power white LED attached + to the flash controller. Setting this control may not be possible in + presence of some faults. See V4L2_CID_FLASH_FAULT. + + + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + * - ``V4L2_FLASH_LED_MODE_NONE`` + - Off. + * - ``V4L2_FLASH_LED_MODE_FLASH`` + - Flash mode. + * - ``V4L2_FLASH_LED_MODE_TORCH`` + - Torch mode. See V4L2_CID_FLASH_TORCH_INTENSITY. + + + +``V4L2_CID_FLASH_STROBE_SOURCE (menu)`` + Defines the source of the flash LED strobe. + +.. tabularcolumns:: |p{7.0cm}|p{10.5cm}| + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + * - ``V4L2_FLASH_STROBE_SOURCE_SOFTWARE`` + - The flash strobe is triggered by using the + V4L2_CID_FLASH_STROBE control. + * - ``V4L2_FLASH_STROBE_SOURCE_EXTERNAL`` + - The flash strobe is triggered by an external source. Typically + this is a sensor, which makes it possible to synchronises the + flash strobe start to exposure start. + + + +``V4L2_CID_FLASH_STROBE (button)`` + Strobe flash. Valid when V4L2_CID_FLASH_LED_MODE is set to + V4L2_FLASH_LED_MODE_FLASH and V4L2_CID_FLASH_STROBE_SOURCE + is set to V4L2_FLASH_STROBE_SOURCE_SOFTWARE. Setting this + control may not be possible in presence of some faults. See + V4L2_CID_FLASH_FAULT. + +``V4L2_CID_FLASH_STROBE_STOP (button)`` + Stop flash strobe immediately. + +``V4L2_CID_FLASH_STROBE_STATUS (boolean)`` + Strobe status: whether the flash is strobing at the moment or not. + This is a read-only control. + +``V4L2_CID_FLASH_TIMEOUT (integer)`` + Hardware timeout for flash. The flash strobe is stopped after this + period of time has passed from the start of the strobe. + +``V4L2_CID_FLASH_INTENSITY (integer)`` + Intensity of the flash strobe when the flash LED is in flash mode + (V4L2_FLASH_LED_MODE_FLASH). The unit should be milliamps (mA) + if possible. + +``V4L2_CID_FLASH_TORCH_INTENSITY (integer)`` + Intensity of the flash LED in torch mode + (V4L2_FLASH_LED_MODE_TORCH). The unit should be milliamps (mA) + if possible. Setting this control may not be possible in presence of + some faults. See V4L2_CID_FLASH_FAULT. + +``V4L2_CID_FLASH_INDICATOR_INTENSITY (integer)`` + Intensity of the indicator LED. The indicator LED may be fully + independent of the flash LED. The unit should be microamps (uA) if + possible. + +``V4L2_CID_FLASH_FAULT (bitmask)`` + Faults related to the flash. The faults tell about specific problems + in the flash chip itself or the LEDs attached to it. Faults may + prevent further use of some of the flash controls. In particular, + V4L2_CID_FLASH_LED_MODE is set to V4L2_FLASH_LED_MODE_NONE + if the fault affects the flash LED. Exactly which faults have such + an effect is chip dependent. Reading the faults resets the control + and returns the chip to a usable state if possible. + +.. tabularcolumns:: |p{8.0cm}|p{9.5cm}| + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + * - ``V4L2_FLASH_FAULT_OVER_VOLTAGE`` + - Flash controller voltage to the flash LED has exceeded the limit + specific to the flash controller. + * - ``V4L2_FLASH_FAULT_TIMEOUT`` + - The flash strobe was still on when the timeout set by the user --- + V4L2_CID_FLASH_TIMEOUT control --- has expired. Not all flash + controllers may set this in all such conditions. + * - ``V4L2_FLASH_FAULT_OVER_TEMPERATURE`` + - The flash controller has overheated. + * - ``V4L2_FLASH_FAULT_SHORT_CIRCUIT`` + - The short circuit protection of the flash controller has been + triggered. + * - ``V4L2_FLASH_FAULT_OVER_CURRENT`` + - Current in the LED power supply has exceeded the limit specific to + the flash controller. + * - ``V4L2_FLASH_FAULT_INDICATOR`` + - The flash controller has detected a short or open circuit + condition on the indicator LED. + * - ``V4L2_FLASH_FAULT_UNDER_VOLTAGE`` + - Flash controller voltage to the flash LED has been below the + minimum limit specific to the flash controller. + * - ``V4L2_FLASH_FAULT_INPUT_VOLTAGE`` + - The input voltage of the flash controller is below the limit under + which strobing the flash at full current will not be possible.The + condition persists until this flag is no longer set. + * - ``V4L2_FLASH_FAULT_LED_OVER_TEMPERATURE`` + - The temperature of the LED has exceeded its allowed upper limit. + + + +``V4L2_CID_FLASH_CHARGE (boolean)`` + Enable or disable charging of the xenon flash capacitor. + +``V4L2_CID_FLASH_READY (boolean)`` + Is the flash ready to strobe? Xenon flashes require their capacitors + charged before strobing. LED flashes often require a cooldown period + after strobe during which another strobe will not be possible. This + is a read-only control. + + +.. _jpeg-controls: + +JPEG Control Reference +====================== + +The JPEG class includes controls for common features of JPEG encoders +and decoders. Currently it includes features for codecs implementing +progressive baseline DCT compression process with Huffman entrophy +coding. + + +.. _jpeg-control-id: + +JPEG Control IDs +---------------- + +``V4L2_CID_JPEG_CLASS (class)`` + The JPEG class descriptor. Calling + :ref:`VIDIOC_QUERYCTRL` for this control will + return a description of this control class. + +``V4L2_CID_JPEG_CHROMA_SUBSAMPLING (menu)`` + The chroma subsampling factors describe how each component of an + input image is sampled, in respect to maximum sample rate in each + spatial dimension. See :ref:`itu-t81`, clause A.1.1. for more + details. The ``V4L2_CID_JPEG_CHROMA_SUBSAMPLING`` control determines + how Cb and Cr components are downsampled after converting an input + image from RGB to Y'CbCr color space. + +.. tabularcolumns:: |p{7.0cm}|p{10.5cm}| + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + * - ``V4L2_JPEG_CHROMA_SUBSAMPLING_444`` + - No chroma subsampling, each pixel has Y, Cr and Cb values. + * - ``V4L2_JPEG_CHROMA_SUBSAMPLING_422`` + - Horizontally subsample Cr, Cb components by a factor of 2. + * - ``V4L2_JPEG_CHROMA_SUBSAMPLING_420`` + - Subsample Cr, Cb components horizontally and vertically by 2. + * - ``V4L2_JPEG_CHROMA_SUBSAMPLING_411`` + - Horizontally subsample Cr, Cb components by a factor of 4. + * - ``V4L2_JPEG_CHROMA_SUBSAMPLING_410`` + - Subsample Cr, Cb components horizontally by 4 and vertically by 2. + * - ``V4L2_JPEG_CHROMA_SUBSAMPLING_GRAY`` + - Use only luminance component. + + + +``V4L2_CID_JPEG_RESTART_INTERVAL (integer)`` + The restart interval determines an interval of inserting RSTm + markers (m = 0..7). The purpose of these markers is to additionally + reinitialize the encoder process, in order to process blocks of an + image independently. For the lossy compression processes the restart + interval unit is MCU (Minimum Coded Unit) and its value is contained + in DRI (Define Restart Interval) marker. If + ``V4L2_CID_JPEG_RESTART_INTERVAL`` control is set to 0, DRI and RSTm + markers will not be inserted. + +.. _jpeg-quality-control: + +``V4L2_CID_JPEG_COMPRESSION_QUALITY (integer)`` + ``V4L2_CID_JPEG_COMPRESSION_QUALITY`` control determines trade-off + between image quality and size. It provides simpler method for + applications to control image quality, without a need for direct + reconfiguration of luminance and chrominance quantization tables. In + cases where a driver uses quantization tables configured directly by + an application, using interfaces defined elsewhere, + ``V4L2_CID_JPEG_COMPRESSION_QUALITY`` control should be set by + driver to 0. + + The value range of this control is driver-specific. Only positive, + non-zero values are meaningful. The recommended range is 1 - 100, + where larger values correspond to better image quality. + +.. _jpeg-active-marker-control: + +``V4L2_CID_JPEG_ACTIVE_MARKER (bitmask)`` + Specify which JPEG markers are included in compressed stream. This + control is valid only for encoders. + + + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + * - ``V4L2_JPEG_ACTIVE_MARKER_APP0`` + - Application data segment APP\ :sub:`0`. + * - ``V4L2_JPEG_ACTIVE_MARKER_APP1`` + - Application data segment APP\ :sub:`1`. + * - ``V4L2_JPEG_ACTIVE_MARKER_COM`` + - Comment segment. + * - ``V4L2_JPEG_ACTIVE_MARKER_DQT`` + - Quantization tables segment. + * - ``V4L2_JPEG_ACTIVE_MARKER_DHT`` + - Huffman tables segment. + + + +For more details about JPEG specification, refer to :ref:`itu-t81`, +:ref:`jfif`, :ref:`w3c-jpeg-jfif`. + + +.. _image-source-controls: + +Image Source Control Reference +============================== + +The Image Source control class is intended for low-level control of +image source devices such as image sensors. The devices feature an +analogue to digital converter and a bus transmitter to transmit the +image data out of the device. + + +.. _image-source-control-id: + +Image Source Control IDs +------------------------ + +``V4L2_CID_IMAGE_SOURCE_CLASS (class)`` + The IMAGE_SOURCE class descriptor. + +``V4L2_CID_VBLANK (integer)`` + Vertical blanking. The idle period after every frame during which no + image data is produced. The unit of vertical blanking is a line. + Every line has length of the image width plus horizontal blanking at + the pixel rate defined by ``V4L2_CID_PIXEL_RATE`` control in the + same sub-device. + +``V4L2_CID_HBLANK (integer)`` + Horizontal blanking. The idle period after every line of image data + during which no image data is produced. The unit of horizontal + blanking is pixels. + +``V4L2_CID_ANALOGUE_GAIN (integer)`` + Analogue gain is gain affecting all colour components in the pixel + matrix. The gain operation is performed in the analogue domain + before A/D conversion. + +``V4L2_CID_TEST_PATTERN_RED (integer)`` + Test pattern red colour component. + +``V4L2_CID_TEST_PATTERN_GREENR (integer)`` + Test pattern green (next to red) colour component. + +``V4L2_CID_TEST_PATTERN_BLUE (integer)`` + Test pattern blue colour component. + +``V4L2_CID_TEST_PATTERN_GREENB (integer)`` + Test pattern green (next to blue) colour component. + + +.. _image-process-controls: + +Image Process Control Reference +=============================== + +The Image Process control class is intended for low-level control of +image processing functions. Unlike ``V4L2_CID_IMAGE_SOURCE_CLASS``, the +controls in this class affect processing the image, and do not control +capturing of it. + + +.. _image-process-control-id: + +Image Process Control IDs +------------------------- + +``V4L2_CID_IMAGE_PROC_CLASS (class)`` + The IMAGE_PROC class descriptor. + +``V4L2_CID_LINK_FREQ (integer menu)`` + Data bus frequency. Together with the media bus pixel code, bus type + (clock cycles per sample), the data bus frequency defines the pixel + rate (``V4L2_CID_PIXEL_RATE``) in the pixel array (or possibly + elsewhere, if the device is not an image sensor). The frame rate can + be calculated from the pixel clock, image width and height and + horizontal and vertical blanking. While the pixel rate control may + be defined elsewhere than in the subdev containing the pixel array, + the frame rate cannot be obtained from that information. This is + because only on the pixel array it can be assumed that the vertical + and horizontal blanking information is exact: no other blanking is + allowed in the pixel array. The selection of frame rate is performed + by selecting the desired horizontal and vertical blanking. The unit + of this control is Hz. + +``V4L2_CID_PIXEL_RATE (64-bit integer)`` + Pixel rate in the source pads of the subdev. This control is + read-only and its unit is pixels / second. + +``V4L2_CID_TEST_PATTERN (menu)`` + Some capture/display/sensor devices have the capability to generate + test pattern images. These hardware specific test patterns can be + used to test if a device is working properly. + +``V4L2_CID_DEINTERLACING_MODE (menu)`` + The video deinterlacing mode (such as Bob, Weave, ...). The menu items are + driver specific and are documented in :ref:`v4l-drivers`. + +``V4L2_CID_DIGITAL_GAIN (integer)`` + Digital gain is the value by which all colour components + are multiplied by. Typically the digital gain applied is the + control value divided by e.g. 0x100, meaning that to get no + digital gain the control value needs to be 0x100. The no-gain + configuration is also typically the default. + + +.. _dv-controls: + +Digital Video Control Reference +=============================== + +The Digital Video control class is intended to control receivers and +transmitters for `VGA <http://en.wikipedia.org/wiki/Vga>`__, +`DVI <http://en.wikipedia.org/wiki/Digital_Visual_Interface>`__ +(Digital Visual Interface), HDMI (:ref:`hdmi`) and DisplayPort +(:ref:`dp`). These controls are generally expected to be private to +the receiver or transmitter subdevice that implements them, so they are +only exposed on the ``/dev/v4l-subdev*`` device node. + +.. note:: + + Note that these devices can have multiple input or output pads which are + hooked up to e.g. HDMI connectors. Even though the subdevice will + receive or transmit video from/to only one of those pads, the other pads + can still be active when it comes to EDID (Extended Display + Identification Data, :ref:`vesaedid`) and HDCP (High-bandwidth Digital + Content Protection System, :ref:`hdcp`) processing, allowing the + device to do the fairly slow EDID/HDCP handling in advance. This allows + for quick switching between connectors. + +These pads appear in several of the controls in this section as +bitmasks, one bit for each pad. Bit 0 corresponds to pad 0, bit 1 to pad +1, etc. The maximum value of the control is the set of valid pads. + + +.. _dv-control-id: + +Digital Video Control IDs +------------------------- + +``V4L2_CID_DV_CLASS (class)`` + The Digital Video class descriptor. + +``V4L2_CID_DV_TX_HOTPLUG (bitmask)`` + Many connectors have a hotplug pin which is high if EDID information + is available from the source. This control shows the state of the + hotplug pin as seen by the transmitter. Each bit corresponds to an + output pad on the transmitter. If an output pad does not have an + associated hotplug pin, then the bit for that pad will be 0. This + read-only control is applicable to DVI-D, HDMI and DisplayPort + connectors. + +``V4L2_CID_DV_TX_RXSENSE (bitmask)`` + Rx Sense is the detection of pull-ups on the TMDS clock lines. This + normally means that the sink has left/entered standby (i.e. the + transmitter can sense that the receiver is ready to receive video). + Each bit corresponds to an output pad on the transmitter. If an + output pad does not have an associated Rx Sense, then the bit for + that pad will be 0. This read-only control is applicable to DVI-D + and HDMI devices. + +``V4L2_CID_DV_TX_EDID_PRESENT (bitmask)`` + When the transmitter sees the hotplug signal from the receiver it + will attempt to read the EDID. If set, then the transmitter has read + at least the first block (= 128 bytes). Each bit corresponds to an + output pad on the transmitter. If an output pad does not support + EDIDs, then the bit for that pad will be 0. This read-only control + is applicable to VGA, DVI-A/D, HDMI and DisplayPort connectors. + +``V4L2_CID_DV_TX_MODE`` + (enum) + +enum v4l2_dv_tx_mode - + HDMI transmitters can transmit in DVI-D mode (just video) or in HDMI + mode (video + audio + auxiliary data). This control selects which + mode to use: V4L2_DV_TX_MODE_DVI_D or V4L2_DV_TX_MODE_HDMI. + This control is applicable to HDMI connectors. + +``V4L2_CID_DV_TX_RGB_RANGE`` + (enum) + +enum v4l2_dv_rgb_range - + Select the quantization range for RGB output. V4L2_DV_RANGE_AUTO + follows the RGB quantization range specified in the standard for the + video interface (ie. :ref:`cea861` for HDMI). + V4L2_DV_RANGE_LIMITED and V4L2_DV_RANGE_FULL override the + standard to be compatible with sinks that have not implemented the + standard correctly (unfortunately quite common for HDMI and DVI-D). + Full range allows all possible values to be used whereas limited + range sets the range to (16 << (N-8)) - (235 << (N-8)) where N is + the number of bits per component. This control is applicable to VGA, + DVI-A/D, HDMI and DisplayPort connectors. + +``V4L2_CID_DV_TX_IT_CONTENT_TYPE`` + (enum) + +enum v4l2_dv_it_content_type - + Configures the IT Content Type of the transmitted video. This + information is sent over HDMI and DisplayPort connectors as part of + the AVI InfoFrame. The term 'IT Content' is used for content that + originates from a computer as opposed to content from a TV broadcast + or an analog source. The enum v4l2_dv_it_content_type defines + the possible content types: + +.. tabularcolumns:: |p{7.0cm}|p{10.5cm}| + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + * - ``V4L2_DV_IT_CONTENT_TYPE_GRAPHICS`` + - Graphics content. Pixel data should be passed unfiltered and + without analog reconstruction. + * - ``V4L2_DV_IT_CONTENT_TYPE_PHOTO`` + - Photo content. The content is derived from digital still pictures. + The content should be passed through with minimal scaling and + picture enhancements. + * - ``V4L2_DV_IT_CONTENT_TYPE_CINEMA`` + - Cinema content. + * - ``V4L2_DV_IT_CONTENT_TYPE_GAME`` + - Game content. Audio and video latency should be minimized. + * - ``V4L2_DV_IT_CONTENT_TYPE_NO_ITC`` + - No IT Content information is available and the ITC bit in the AVI + InfoFrame is set to 0. + + + +``V4L2_CID_DV_RX_POWER_PRESENT (bitmask)`` + Detects whether the receiver receives power from the source (e.g. + HDMI carries 5V on one of the pins). This is often used to power an + eeprom which contains EDID information, such that the source can + read the EDID even if the sink is in standby/power off. Each bit + corresponds to an input pad on the receiver. If an input pad + cannot detect whether power is present, then the bit for that pad + will be 0. This read-only control is applicable to DVI-D, HDMI and + DisplayPort connectors. + +``V4L2_CID_DV_RX_RGB_RANGE`` + (enum) + +enum v4l2_dv_rgb_range - + Select the quantization range for RGB input. V4L2_DV_RANGE_AUTO + follows the RGB quantization range specified in the standard for the + video interface (ie. :ref:`cea861` for HDMI). + V4L2_DV_RANGE_LIMITED and V4L2_DV_RANGE_FULL override the + standard to be compatible with sources that have not implemented the + standard correctly (unfortunately quite common for HDMI and DVI-D). + Full range allows all possible values to be used whereas limited + range sets the range to (16 << (N-8)) - (235 << (N-8)) where N is + the number of bits per component. This control is applicable to VGA, + DVI-A/D, HDMI and DisplayPort connectors. + +``V4L2_CID_DV_RX_IT_CONTENT_TYPE`` + (enum) + +enum v4l2_dv_it_content_type - + Reads the IT Content Type of the received video. This information is + sent over HDMI and DisplayPort connectors as part of the AVI + InfoFrame. The term 'IT Content' is used for content that originates + from a computer as opposed to content from a TV broadcast or an + analog source. See ``V4L2_CID_DV_TX_IT_CONTENT_TYPE`` for the + available content types. + + +.. _fm-rx-controls: + +FM Receiver Control Reference +============================= + +The FM Receiver (FM_RX) class includes controls for common features of +FM Reception capable devices. + + +.. _fm-rx-control-id: + +FM_RX Control IDs +----------------- + +``V4L2_CID_FM_RX_CLASS (class)`` + The FM_RX class descriptor. Calling + :ref:`VIDIOC_QUERYCTRL` for this control will + return a description of this control class. + +``V4L2_CID_RDS_RECEPTION (boolean)`` + Enables/disables RDS reception by the radio tuner + +``V4L2_CID_RDS_RX_PTY (integer)`` + Gets RDS Programme Type field. This encodes up to 31 pre-defined + programme types. + +``V4L2_CID_RDS_RX_PS_NAME (string)`` + Gets the Programme Service name (PS_NAME). It is intended for + static display on a receiver. It is the primary aid to listeners in + programme service identification and selection. In Annex E of + :ref:`iec62106`, the RDS specification, there is a full + description of the correct character encoding for Programme Service + name strings. Also from RDS specification, PS is usually a single + eight character text. However, it is also possible to find receivers + which can scroll strings sized as 8 x N characters. So, this control + must be configured with steps of 8 characters. The result is it must + always contain a string with size multiple of 8. + +``V4L2_CID_RDS_RX_RADIO_TEXT (string)`` + Gets the Radio Text info. It is a textual description of what is + being broadcasted. RDS Radio Text can be applied when broadcaster + wishes to transmit longer PS names, programme-related information or + any other text. In these cases, RadioText can be used in addition to + ``V4L2_CID_RDS_RX_PS_NAME``. The encoding for Radio Text strings is + also fully described in Annex E of :ref:`iec62106`. The length of + Radio Text strings depends on which RDS Block is being used to + transmit it, either 32 (2A block) or 64 (2B block). However, it is + also possible to find receivers which can scroll strings sized as 32 + x N or 64 x N characters. So, this control must be configured with + steps of 32 or 64 characters. The result is it must always contain a + string with size multiple of 32 or 64. + +``V4L2_CID_RDS_RX_TRAFFIC_ANNOUNCEMENT (boolean)`` + If set, then a traffic announcement is in progress. + +``V4L2_CID_RDS_RX_TRAFFIC_PROGRAM (boolean)`` + If set, then the tuned programme carries traffic announcements. + +``V4L2_CID_RDS_RX_MUSIC_SPEECH (boolean)`` + If set, then this channel broadcasts music. If cleared, then it + broadcasts speech. If the transmitter doesn't make this distinction, + then it will be set. + +``V4L2_CID_TUNE_DEEMPHASIS`` + (enum) + +enum v4l2_deemphasis - + Configures the de-emphasis value for reception. A de-emphasis filter + is applied to the broadcast to accentuate the high audio + frequencies. Depending on the region, a time constant of either 50 + or 75 useconds is used. The enum v4l2_deemphasis defines possible + values for de-emphasis. Here they are: + + + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + * - ``V4L2_DEEMPHASIS_DISABLED`` + - No de-emphasis is applied. + * - ``V4L2_DEEMPHASIS_50_uS`` + - A de-emphasis of 50 uS is used. + * - ``V4L2_DEEMPHASIS_75_uS`` + - A de-emphasis of 75 uS is used. + + + + +.. _detect-controls: + +Detect Control Reference +======================== + +The Detect class includes controls for common features of various motion +or object detection capable devices. + + +.. _detect-control-id: + +Detect Control IDs +------------------ + +``V4L2_CID_DETECT_CLASS (class)`` + The Detect class descriptor. Calling + :ref:`VIDIOC_QUERYCTRL` for this control will + return a description of this control class. + +``V4L2_CID_DETECT_MD_MODE (menu)`` + Sets the motion detection mode. + +.. tabularcolumns:: |p{7.5cm}|p{10.0cm}| + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + * - ``V4L2_DETECT_MD_MODE_DISABLED`` + - Disable motion detection. + * - ``V4L2_DETECT_MD_MODE_GLOBAL`` + - Use a single motion detection threshold. + * - ``V4L2_DETECT_MD_MODE_THRESHOLD_GRID`` + - The image is divided into a grid, each cell with its own motion + detection threshold. These thresholds are set through the + ``V4L2_CID_DETECT_MD_THRESHOLD_GRID`` matrix control. + * - ``V4L2_DETECT_MD_MODE_REGION_GRID`` + - The image is divided into a grid, each cell with its own region + value that specifies which per-region motion detection thresholds + should be used. Each region has its own thresholds. How these + per-region thresholds are set up is driver-specific. The region + values for the grid are set through the + ``V4L2_CID_DETECT_MD_REGION_GRID`` matrix control. + + + +``V4L2_CID_DETECT_MD_GLOBAL_THRESHOLD (integer)`` + Sets the global motion detection threshold to be used with the + ``V4L2_DETECT_MD_MODE_GLOBAL`` motion detection mode. + +``V4L2_CID_DETECT_MD_THRESHOLD_GRID (__u16 matrix)`` + Sets the motion detection thresholds for each cell in the grid. To + be used with the ``V4L2_DETECT_MD_MODE_THRESHOLD_GRID`` motion + detection mode. Matrix element (0, 0) represents the cell at the + top-left of the grid. + +``V4L2_CID_DETECT_MD_REGION_GRID (__u8 matrix)`` + Sets the motion detection region value for each cell in the grid. To + be used with the ``V4L2_DETECT_MD_MODE_REGION_GRID`` motion + detection mode. Matrix element (0, 0) represents the cell at the + top-left of the grid. + + +.. _rf-tuner-controls: + +RF Tuner Control Reference +========================== + +The RF Tuner (RF_TUNER) class includes controls for common features of +devices having RF tuner. + +In this context, RF tuner is radio receiver circuit between antenna and +demodulator. It receives radio frequency (RF) from the antenna and +converts that received signal to lower intermediate frequency (IF) or +baseband frequency (BB). Tuners that could do baseband output are often +called Zero-IF tuners. Older tuners were typically simple PLL tuners +inside a metal box, whilst newer ones are highly integrated chips +without a metal box "silicon tuners". These controls are mostly +applicable for new feature rich silicon tuners, just because older +tuners does not have much adjustable features. + +For more information about RF tuners see +`Tuner (radio) <http://en.wikipedia.org/wiki/Tuner_%28radio%29>`__ +and `RF front end <http://en.wikipedia.org/wiki/RF_front_end>`__ +from Wikipedia. + + +.. _rf-tuner-control-id: + +RF_TUNER Control IDs +-------------------- + +``V4L2_CID_RF_TUNER_CLASS (class)`` + The RF_TUNER class descriptor. Calling + :ref:`VIDIOC_QUERYCTRL` for this control will + return a description of this control class. + +``V4L2_CID_RF_TUNER_BANDWIDTH_AUTO (boolean)`` + Enables/disables tuner radio channel bandwidth configuration. In + automatic mode bandwidth configuration is performed by the driver. + +``V4L2_CID_RF_TUNER_BANDWIDTH (integer)`` + Filter(s) on tuner signal path are used to filter signal according + to receiving party needs. Driver configures filters to fulfill + desired bandwidth requirement. Used when + V4L2_CID_RF_TUNER_BANDWIDTH_AUTO is not set. Unit is in Hz. The + range and step are driver-specific. + +``V4L2_CID_RF_TUNER_LNA_GAIN_AUTO (boolean)`` + Enables/disables LNA automatic gain control (AGC) + +``V4L2_CID_RF_TUNER_MIXER_GAIN_AUTO (boolean)`` + Enables/disables mixer automatic gain control (AGC) + +``V4L2_CID_RF_TUNER_IF_GAIN_AUTO (boolean)`` + Enables/disables IF automatic gain control (AGC) + +``V4L2_CID_RF_TUNER_RF_GAIN (integer)`` + The RF amplifier is the very first amplifier on the receiver signal + path, just right after the antenna input. The difference between the + LNA gain and the RF gain in this document is that the LNA gain is + integrated in the tuner chip while the RF gain is a separate chip. + There may be both RF and LNA gain controls in the same device. The + range and step are driver-specific. + +``V4L2_CID_RF_TUNER_LNA_GAIN (integer)`` + LNA (low noise amplifier) gain is first gain stage on the RF tuner + signal path. It is located very close to tuner antenna input. Used + when ``V4L2_CID_RF_TUNER_LNA_GAIN_AUTO`` is not set. See + ``V4L2_CID_RF_TUNER_RF_GAIN`` to understand how RF gain and LNA gain + differs from the each others. The range and step are + driver-specific. + +``V4L2_CID_RF_TUNER_MIXER_GAIN (integer)`` + Mixer gain is second gain stage on the RF tuner signal path. It is + located inside mixer block, where RF signal is down-converted by the + mixer. Used when ``V4L2_CID_RF_TUNER_MIXER_GAIN_AUTO`` is not set. + The range and step are driver-specific. + +``V4L2_CID_RF_TUNER_IF_GAIN (integer)`` + IF gain is last gain stage on the RF tuner signal path. It is + located on output of RF tuner. It controls signal level of + intermediate frequency output or baseband output. Used when + ``V4L2_CID_RF_TUNER_IF_GAIN_AUTO`` is not set. The range and step + are driver-specific. + +``V4L2_CID_RF_TUNER_PLL_LOCK (boolean)`` + Is synthesizer PLL locked? RF tuner is receiving given frequency + when that control is set. This is a read-only control. + +.. [#f1] + This control may be changed to a menu control in the future, if more + options are required. |