diff options
Diffstat (limited to 'arch/alpha/kernel/sys_cabriolet.c')
| -rw-r--r-- | arch/alpha/kernel/sys_cabriolet.c | 444 |
1 files changed, 444 insertions, 0 deletions
diff --git a/arch/alpha/kernel/sys_cabriolet.c b/arch/alpha/kernel/sys_cabriolet.c new file mode 100644 index 000000000..10bc46a4e --- /dev/null +++ b/arch/alpha/kernel/sys_cabriolet.c @@ -0,0 +1,444 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * linux/arch/alpha/kernel/sys_cabriolet.c + * + * Copyright (C) 1995 David A Rusling + * Copyright (C) 1996 Jay A Estabrook + * Copyright (C) 1998, 1999, 2000 Richard Henderson + * + * Code supporting the Cabriolet (AlphaPC64), EB66+, and EB164, + * PC164 and LX164. + */ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/mm.h> +#include <linux/sched.h> +#include <linux/pci.h> +#include <linux/init.h> +#include <linux/bitops.h> + +#include <asm/ptrace.h> +#include <asm/dma.h> +#include <asm/irq.h> +#include <asm/mmu_context.h> +#include <asm/io.h> +#include <asm/pgtable.h> +#include <asm/core_apecs.h> +#include <asm/core_cia.h> +#include <asm/core_lca.h> +#include <asm/tlbflush.h> + +#include "proto.h" +#include "irq_impl.h" +#include "pci_impl.h" +#include "machvec_impl.h" +#include "pc873xx.h" + +/* Note mask bit is true for DISABLED irqs. */ +static unsigned long cached_irq_mask = ~0UL; + +static inline void +cabriolet_update_irq_hw(unsigned int irq, unsigned long mask) +{ + int ofs = (irq - 16) / 8; + outb(mask >> (16 + ofs * 8), 0x804 + ofs); +} + +static inline void +cabriolet_enable_irq(struct irq_data *d) +{ + cabriolet_update_irq_hw(d->irq, cached_irq_mask &= ~(1UL << d->irq)); +} + +static void +cabriolet_disable_irq(struct irq_data *d) +{ + cabriolet_update_irq_hw(d->irq, cached_irq_mask |= 1UL << d->irq); +} + +static struct irq_chip cabriolet_irq_type = { + .name = "CABRIOLET", + .irq_unmask = cabriolet_enable_irq, + .irq_mask = cabriolet_disable_irq, + .irq_mask_ack = cabriolet_disable_irq, +}; + +static void +cabriolet_device_interrupt(unsigned long v) +{ + unsigned long pld; + unsigned int i; + + /* Read the interrupt summary registers */ + pld = inb(0x804) | (inb(0x805) << 8) | (inb(0x806) << 16); + + /* + * Now for every possible bit set, work through them and call + * the appropriate interrupt handler. + */ + while (pld) { + i = ffz(~pld); + pld &= pld - 1; /* clear least bit set */ + if (i == 4) { + isa_device_interrupt(v); + } else { + handle_irq(16 + i); + } + } +} + +static void __init +common_init_irq(void (*srm_dev_int)(unsigned long v)) +{ + init_i8259a_irqs(); + + if (alpha_using_srm) { + alpha_mv.device_interrupt = srm_dev_int; + init_srm_irqs(35, 0); + } + else { + long i; + + outb(0xff, 0x804); + outb(0xff, 0x805); + outb(0xff, 0x806); + + for (i = 16; i < 35; ++i) { + irq_set_chip_and_handler(i, &cabriolet_irq_type, + handle_level_irq); + irq_set_status_flags(i, IRQ_LEVEL); + } + } + + common_init_isa_dma(); + setup_irq(16+4, &isa_cascade_irqaction); +} + +#ifndef CONFIG_ALPHA_PC164 +static void __init +cabriolet_init_irq(void) +{ + common_init_irq(srm_device_interrupt); +} +#endif + +#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_PC164) +/* In theory, the PC164 has the same interrupt hardware as the other + Cabriolet based systems. However, something got screwed up late + in the development cycle which broke the interrupt masking hardware. + Repeat, it is not possible to mask and ack interrupts. At all. + + In an attempt to work around this, while processing interrupts, + we do not allow the IPL to drop below what it is currently. This + prevents the possibility of recursion. + + ??? Another option might be to force all PCI devices to use edge + triggered rather than level triggered interrupts. That might be + too invasive though. */ + +static void +pc164_srm_device_interrupt(unsigned long v) +{ + __min_ipl = getipl(); + srm_device_interrupt(v); + __min_ipl = 0; +} + +static void +pc164_device_interrupt(unsigned long v) +{ + __min_ipl = getipl(); + cabriolet_device_interrupt(v); + __min_ipl = 0; +} + +static void __init +pc164_init_irq(void) +{ + common_init_irq(pc164_srm_device_interrupt); +} +#endif + +/* + * The EB66+ is very similar to the EB66 except that it does not have + * the on-board NCR and Tulip chips. In the code below, I have used + * slot number to refer to the id select line and *not* the slot + * number used in the EB66+ documentation. However, in the table, + * I've given the slot number, the id select line and the Jxx number + * that's printed on the board. The interrupt pins from the PCI slots + * are wired into 3 interrupt summary registers at 0x804, 0x805 and + * 0x806 ISA. + * + * In the table, -1 means don't assign an IRQ number. This is usually + * because it is the Saturn IO (SIO) PCI/ISA Bridge Chip. + */ + +static inline int +eb66p_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) +{ + static char irq_tab[5][5] = { + /*INT INTA INTB INTC INTD */ + {16+0, 16+0, 16+5, 16+9, 16+13}, /* IdSel 6, slot 0, J25 */ + {16+1, 16+1, 16+6, 16+10, 16+14}, /* IdSel 7, slot 1, J26 */ + { -1, -1, -1, -1, -1}, /* IdSel 8, SIO */ + {16+2, 16+2, 16+7, 16+11, 16+15}, /* IdSel 9, slot 2, J27 */ + {16+3, 16+3, 16+8, 16+12, 16+6} /* IdSel 10, slot 3, J28 */ + }; + const long min_idsel = 6, max_idsel = 10, irqs_per_slot = 5; + return COMMON_TABLE_LOOKUP; +} + + +/* + * The AlphaPC64 is very similar to the EB66+ except that its slots + * are numbered differently. In the code below, I have used slot + * number to refer to the id select line and *not* the slot number + * used in the AlphaPC64 documentation. However, in the table, I've + * given the slot number, the id select line and the Jxx number that's + * printed on the board. The interrupt pins from the PCI slots are + * wired into 3 interrupt summary registers at 0x804, 0x805 and 0x806 + * ISA. + * + * In the table, -1 means don't assign an IRQ number. This is usually + * because it is the Saturn IO (SIO) PCI/ISA Bridge Chip. + */ + +static inline int +cabriolet_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) +{ + static char irq_tab[5][5] = { + /*INT INTA INTB INTC INTD */ + { 16+2, 16+2, 16+7, 16+11, 16+15}, /* IdSel 5, slot 2, J21 */ + { 16+0, 16+0, 16+5, 16+9, 16+13}, /* IdSel 6, slot 0, J19 */ + { 16+1, 16+1, 16+6, 16+10, 16+14}, /* IdSel 7, slot 1, J20 */ + { -1, -1, -1, -1, -1}, /* IdSel 8, SIO */ + { 16+3, 16+3, 16+8, 16+12, 16+16} /* IdSel 9, slot 3, J22 */ + }; + const long min_idsel = 5, max_idsel = 9, irqs_per_slot = 5; + return COMMON_TABLE_LOOKUP; +} + +static inline void __init +cabriolet_enable_ide(void) +{ + if (pc873xx_probe() == -1) { + printk(KERN_ERR "Probing for PC873xx Super IO chip failed.\n"); + } else { + printk(KERN_INFO "Found %s Super IO chip at 0x%x\n", + pc873xx_get_model(), pc873xx_get_base()); + + pc873xx_enable_ide(); + } +} + +static inline void __init +cabriolet_init_pci(void) +{ + common_init_pci(); + cabriolet_enable_ide(); +} + +static inline void __init +cia_cab_init_pci(void) +{ + cia_init_pci(); + cabriolet_enable_ide(); +} + +/* + * The PC164 and LX164 have 19 PCI interrupts, four from each of the four + * PCI slots, the SIO, PCI/IDE, and USB. + * + * Each of the interrupts can be individually masked. This is + * accomplished by setting the appropriate bit in the mask register. + * A bit is set by writing a "1" to the desired position in the mask + * register and cleared by writing a "0". There are 3 mask registers + * located at ISA address 804h, 805h and 806h. + * + * An I/O read at ISA address 804h, 805h, 806h will return the + * state of the 11 PCI interrupts and not the state of the MASKED + * interrupts. + * + * Note: A write to I/O 804h, 805h, and 806h the mask register will be + * updated. + * + * + * ISA DATA<7:0> + * ISA +--------------------------------------------------------------+ + * ADDRESS | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 | + * +==============================================================+ + * 0x804 | INTB0 | USB | IDE | SIO | INTA3 |INTA2 | INTA1 | INTA0 | + * +--------------------------------------------------------------+ + * 0x805 | INTD0 | INTC3 | INTC2 | INTC1 | INTC0 |INTB3 | INTB2 | INTB1 | + * +--------------------------------------------------------------+ + * 0x806 | Rsrv | Rsrv | Rsrv | Rsrv | Rsrv |INTD3 | INTD2 | INTD1 | + * +--------------------------------------------------------------+ + * * Rsrv = reserved bits + * Note: The mask register is write-only. + * + * IdSel + * 5 32 bit PCI option slot 2 + * 6 64 bit PCI option slot 0 + * 7 64 bit PCI option slot 1 + * 8 Saturn I/O + * 9 32 bit PCI option slot 3 + * 10 USB + * 11 IDE + * + */ + +static inline int +alphapc164_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) +{ + static char irq_tab[7][5] = { + /*INT INTA INTB INTC INTD */ + { 16+2, 16+2, 16+9, 16+13, 16+17}, /* IdSel 5, slot 2, J20 */ + { 16+0, 16+0, 16+7, 16+11, 16+15}, /* IdSel 6, slot 0, J29 */ + { 16+1, 16+1, 16+8, 16+12, 16+16}, /* IdSel 7, slot 1, J26 */ + { -1, -1, -1, -1, -1}, /* IdSel 8, SIO */ + { 16+3, 16+3, 16+10, 16+14, 16+18}, /* IdSel 9, slot 3, J19 */ + { 16+6, 16+6, 16+6, 16+6, 16+6}, /* IdSel 10, USB */ + { 16+5, 16+5, 16+5, 16+5, 16+5} /* IdSel 11, IDE */ + }; + const long min_idsel = 5, max_idsel = 11, irqs_per_slot = 5; + return COMMON_TABLE_LOOKUP; +} + +static inline void __init +alphapc164_init_pci(void) +{ + cia_init_pci(); + SMC93x_Init(); +} + + +/* + * The System Vector + */ + +#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_CABRIOLET) +struct alpha_machine_vector cabriolet_mv __initmv = { + .vector_name = "Cabriolet", + DO_EV4_MMU, + DO_DEFAULT_RTC, + DO_APECS_IO, + .machine_check = apecs_machine_check, + .max_isa_dma_address = ALPHA_MAX_ISA_DMA_ADDRESS, + .min_io_address = DEFAULT_IO_BASE, + .min_mem_address = APECS_AND_LCA_DEFAULT_MEM_BASE, + + .nr_irqs = 35, + .device_interrupt = cabriolet_device_interrupt, + + .init_arch = apecs_init_arch, + .init_irq = cabriolet_init_irq, + .init_rtc = common_init_rtc, + .init_pci = cabriolet_init_pci, + .pci_map_irq = cabriolet_map_irq, + .pci_swizzle = common_swizzle, +}; +#ifndef CONFIG_ALPHA_EB64P +ALIAS_MV(cabriolet) +#endif +#endif + +#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_EB164) +struct alpha_machine_vector eb164_mv __initmv = { + .vector_name = "EB164", + DO_EV5_MMU, + DO_DEFAULT_RTC, + DO_CIA_IO, + .machine_check = cia_machine_check, + .max_isa_dma_address = ALPHA_MAX_ISA_DMA_ADDRESS, + .min_io_address = DEFAULT_IO_BASE, + .min_mem_address = CIA_DEFAULT_MEM_BASE, + + .nr_irqs = 35, + .device_interrupt = cabriolet_device_interrupt, + + .init_arch = cia_init_arch, + .init_irq = cabriolet_init_irq, + .init_rtc = common_init_rtc, + .init_pci = cia_cab_init_pci, + .kill_arch = cia_kill_arch, + .pci_map_irq = cabriolet_map_irq, + .pci_swizzle = common_swizzle, +}; +ALIAS_MV(eb164) +#endif + +#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_EB66P) +struct alpha_machine_vector eb66p_mv __initmv = { + .vector_name = "EB66+", + DO_EV4_MMU, + DO_DEFAULT_RTC, + DO_LCA_IO, + .machine_check = lca_machine_check, + .max_isa_dma_address = ALPHA_MAX_ISA_DMA_ADDRESS, + .min_io_address = DEFAULT_IO_BASE, + .min_mem_address = APECS_AND_LCA_DEFAULT_MEM_BASE, + + .nr_irqs = 35, + .device_interrupt = cabriolet_device_interrupt, + + .init_arch = lca_init_arch, + .init_irq = cabriolet_init_irq, + .init_rtc = common_init_rtc, + .init_pci = cabriolet_init_pci, + .pci_map_irq = eb66p_map_irq, + .pci_swizzle = common_swizzle, +}; +ALIAS_MV(eb66p) +#endif + +#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_LX164) +struct alpha_machine_vector lx164_mv __initmv = { + .vector_name = "LX164", + DO_EV5_MMU, + DO_DEFAULT_RTC, + DO_PYXIS_IO, + .machine_check = cia_machine_check, + .max_isa_dma_address = ALPHA_MAX_ISA_DMA_ADDRESS, + .min_io_address = DEFAULT_IO_BASE, + .min_mem_address = DEFAULT_MEM_BASE, + .pci_dac_offset = PYXIS_DAC_OFFSET, + + .nr_irqs = 35, + .device_interrupt = cabriolet_device_interrupt, + + .init_arch = pyxis_init_arch, + .init_irq = cabriolet_init_irq, + .init_rtc = common_init_rtc, + .init_pci = alphapc164_init_pci, + .kill_arch = cia_kill_arch, + .pci_map_irq = alphapc164_map_irq, + .pci_swizzle = common_swizzle, +}; +ALIAS_MV(lx164) +#endif + +#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_PC164) +struct alpha_machine_vector pc164_mv __initmv = { + .vector_name = "PC164", + DO_EV5_MMU, + DO_DEFAULT_RTC, + DO_CIA_IO, + .machine_check = cia_machine_check, + .max_isa_dma_address = ALPHA_MAX_ISA_DMA_ADDRESS, + .min_io_address = DEFAULT_IO_BASE, + .min_mem_address = CIA_DEFAULT_MEM_BASE, + + .nr_irqs = 35, + .device_interrupt = pc164_device_interrupt, + + .init_arch = cia_init_arch, + .init_irq = pc164_init_irq, + .init_rtc = common_init_rtc, + .init_pci = alphapc164_init_pci, + .kill_arch = cia_kill_arch, + .pci_map_irq = alphapc164_map_irq, + .pci_swizzle = common_swizzle, +}; +ALIAS_MV(pc164) +#endif |