diff options
Diffstat (limited to 'arch/m68k/coldfire/intc-simr.c')
| -rw-r--r-- | arch/m68k/coldfire/intc-simr.c | 199 |
1 files changed, 199 insertions, 0 deletions
diff --git a/arch/m68k/coldfire/intc-simr.c b/arch/m68k/coldfire/intc-simr.c new file mode 100644 index 000000000..15c4b7a6e --- /dev/null +++ b/arch/m68k/coldfire/intc-simr.c @@ -0,0 +1,199 @@ +/* + * intc-simr.c + * + * Interrupt controller code for the ColdFire 5208, 5207 & 532x parts. + * + * (C) Copyright 2009-2011, Greg Ungerer <gerg@snapgear.com> + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file COPYING in the main directory of this archive + * for more details. + */ + +#include <linux/types.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/io.h> +#include <asm/coldfire.h> +#include <asm/mcfsim.h> +#include <asm/traps.h> + +/* + * The EDGE Port interrupts are the fixed 7 external interrupts. + * They need some special treatment, for example they need to be acked. + */ +#ifdef CONFIG_M520x +/* + * The 520x parts only support a limited range of these external + * interrupts, only 1, 4 and 7 (as interrupts 65, 66 and 67). + */ +#define EINT0 64 /* Is not actually used, but spot reserved for it */ +#define EINT1 65 /* EDGE Port interrupt 1 */ +#define EINT4 66 /* EDGE Port interrupt 4 */ +#define EINT7 67 /* EDGE Port interrupt 7 */ + +static unsigned int irqebitmap[] = { 0, 1, 4, 7 }; +static inline unsigned int irq2ebit(unsigned int irq) +{ + return irqebitmap[irq - EINT0]; +} + +#else + +/* + * Most of the ColdFire parts with the EDGE Port module just have + * a strait direct mapping of the 7 external interrupts. Although + * there is a bit reserved for 0, it is not used. + */ +#define EINT0 64 /* Is not actually used, but spot reserved for it */ +#define EINT1 65 /* EDGE Port interrupt 1 */ +#define EINT7 71 /* EDGE Port interrupt 7 */ + +static inline unsigned int irq2ebit(unsigned int irq) +{ + return irq - EINT0; +} + +#endif + +/* + * There maybe one, two or three interrupt control units, each has 64 + * interrupts. If there is no second or third unit then MCFINTC1_* or + * MCFINTC2_* defines will be 0 (and code for them optimized away). + */ + +static void intc_irq_mask(struct irq_data *d) +{ + unsigned int irq = d->irq - MCFINT_VECBASE; + + if (MCFINTC2_SIMR && (irq > 128)) + __raw_writeb(irq - 128, MCFINTC2_SIMR); + else if (MCFINTC1_SIMR && (irq > 64)) + __raw_writeb(irq - 64, MCFINTC1_SIMR); + else + __raw_writeb(irq, MCFINTC0_SIMR); +} + +static void intc_irq_unmask(struct irq_data *d) +{ + unsigned int irq = d->irq - MCFINT_VECBASE; + + if (MCFINTC2_CIMR && (irq > 128)) + __raw_writeb(irq - 128, MCFINTC2_CIMR); + else if (MCFINTC1_CIMR && (irq > 64)) + __raw_writeb(irq - 64, MCFINTC1_CIMR); + else + __raw_writeb(irq, MCFINTC0_CIMR); +} + +static void intc_irq_ack(struct irq_data *d) +{ + unsigned int ebit = irq2ebit(d->irq); + + __raw_writeb(0x1 << ebit, MCFEPORT_EPFR); +} + +static unsigned int intc_irq_startup(struct irq_data *d) +{ + unsigned int irq = d->irq; + + if ((irq >= EINT1) && (irq <= EINT7)) { + unsigned int ebit = irq2ebit(irq); + u8 v; + +#if defined(MCFEPORT_EPDDR) + /* Set EPORT line as input */ + v = __raw_readb(MCFEPORT_EPDDR); + __raw_writeb(v & ~(0x1 << ebit), MCFEPORT_EPDDR); +#endif + + /* Set EPORT line as interrupt source */ + v = __raw_readb(MCFEPORT_EPIER); + __raw_writeb(v | (0x1 << ebit), MCFEPORT_EPIER); + } + + irq -= MCFINT_VECBASE; + if (MCFINTC2_ICR0 && (irq > 128)) + __raw_writeb(5, MCFINTC2_ICR0 + irq - 128); + else if (MCFINTC1_ICR0 && (irq > 64)) + __raw_writeb(5, MCFINTC1_ICR0 + irq - 64); + else + __raw_writeb(5, MCFINTC0_ICR0 + irq); + + intc_irq_unmask(d); + return 0; +} + +static int intc_irq_set_type(struct irq_data *d, unsigned int type) +{ + unsigned int ebit, irq = d->irq; + u16 pa, tb; + + switch (type) { + case IRQ_TYPE_EDGE_RISING: + tb = 0x1; + break; + case IRQ_TYPE_EDGE_FALLING: + tb = 0x2; + break; + case IRQ_TYPE_EDGE_BOTH: + tb = 0x3; + break; + default: + /* Level triggered */ + tb = 0; + break; + } + + if (tb) + irq_set_handler(irq, handle_edge_irq); + + ebit = irq2ebit(irq) * 2; + pa = __raw_readw(MCFEPORT_EPPAR); + pa = (pa & ~(0x3 << ebit)) | (tb << ebit); + __raw_writew(pa, MCFEPORT_EPPAR); + + return 0; +} + +static struct irq_chip intc_irq_chip = { + .name = "CF-INTC", + .irq_startup = intc_irq_startup, + .irq_mask = intc_irq_mask, + .irq_unmask = intc_irq_unmask, +}; + +static struct irq_chip intc_irq_chip_edge_port = { + .name = "CF-INTC-EP", + .irq_startup = intc_irq_startup, + .irq_mask = intc_irq_mask, + .irq_unmask = intc_irq_unmask, + .irq_ack = intc_irq_ack, + .irq_set_type = intc_irq_set_type, +}; + +void __init init_IRQ(void) +{ + int irq, eirq; + + /* Mask all interrupt sources */ + __raw_writeb(0xff, MCFINTC0_SIMR); + if (MCFINTC1_SIMR) + __raw_writeb(0xff, MCFINTC1_SIMR); + if (MCFINTC2_SIMR) + __raw_writeb(0xff, MCFINTC2_SIMR); + + eirq = MCFINT_VECBASE + 64 + (MCFINTC1_ICR0 ? 64 : 0) + + (MCFINTC2_ICR0 ? 64 : 0); + for (irq = MCFINT_VECBASE; (irq < eirq); irq++) { + if ((irq >= EINT1) && (irq <= EINT7)) + irq_set_chip(irq, &intc_irq_chip_edge_port); + else + irq_set_chip(irq, &intc_irq_chip); + irq_set_irq_type(irq, IRQ_TYPE_LEVEL_HIGH); + irq_set_handler(irq, handle_level_irq); + } +} + |