diff options
Diffstat (limited to 'arch/mips/alchemy/common/platform.c')
| -rw-r--r-- | arch/mips/alchemy/common/platform.c | 452 |
1 files changed, 452 insertions, 0 deletions
diff --git a/arch/mips/alchemy/common/platform.c b/arch/mips/alchemy/common/platform.c new file mode 100644 index 000000000..1454d9f6a --- /dev/null +++ b/arch/mips/alchemy/common/platform.c @@ -0,0 +1,452 @@ +/* + * Platform device support for Au1x00 SoCs. + * + * Copyright 2004, Matt Porter <mporter@kernel.crashing.org> + * + * (C) Copyright Embedded Alley Solutions, Inc 2005 + * Author: Pantelis Antoniou <pantelis@embeddedalley.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/clk.h> +#include <linux/dma-mapping.h> +#include <linux/etherdevice.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/serial_8250.h> +#include <linux/slab.h> +#include <linux/usb/ehci_pdriver.h> +#include <linux/usb/ohci_pdriver.h> + +#include <asm/mach-au1x00/au1000.h> +#include <asm/mach-au1x00/au1xxx_dbdma.h> +#include <asm/mach-au1x00/au1100_mmc.h> +#include <asm/mach-au1x00/au1xxx_eth.h> + +#include <prom.h> + +static void alchemy_8250_pm(struct uart_port *port, unsigned int state, + unsigned int old_state) +{ +#ifdef CONFIG_SERIAL_8250 + switch (state) { + case 0: + alchemy_uart_enable(CPHYSADDR(port->membase)); + serial8250_do_pm(port, state, old_state); + break; + case 3: /* power off */ + serial8250_do_pm(port, state, old_state); + alchemy_uart_disable(CPHYSADDR(port->membase)); + break; + default: + serial8250_do_pm(port, state, old_state); + break; + } +#endif +} + +#define PORT(_base, _irq) \ + { \ + .mapbase = _base, \ + .irq = _irq, \ + .regshift = 2, \ + .iotype = UPIO_AU, \ + .flags = UPF_SKIP_TEST | UPF_IOREMAP | \ + UPF_FIXED_TYPE, \ + .type = PORT_16550A, \ + .pm = alchemy_8250_pm, \ + } + +static struct plat_serial8250_port au1x00_uart_data[][4] __initdata = { + [ALCHEMY_CPU_AU1000] = { + PORT(AU1000_UART0_PHYS_ADDR, AU1000_UART0_INT), + PORT(AU1000_UART1_PHYS_ADDR, AU1000_UART1_INT), + PORT(AU1000_UART2_PHYS_ADDR, AU1000_UART2_INT), + PORT(AU1000_UART3_PHYS_ADDR, AU1000_UART3_INT), + }, + [ALCHEMY_CPU_AU1500] = { + PORT(AU1000_UART0_PHYS_ADDR, AU1500_UART0_INT), + PORT(AU1000_UART3_PHYS_ADDR, AU1500_UART3_INT), + }, + [ALCHEMY_CPU_AU1100] = { + PORT(AU1000_UART0_PHYS_ADDR, AU1100_UART0_INT), + PORT(AU1000_UART1_PHYS_ADDR, AU1100_UART1_INT), + PORT(AU1000_UART3_PHYS_ADDR, AU1100_UART3_INT), + }, + [ALCHEMY_CPU_AU1550] = { + PORT(AU1000_UART0_PHYS_ADDR, AU1550_UART0_INT), + PORT(AU1000_UART1_PHYS_ADDR, AU1550_UART1_INT), + PORT(AU1000_UART3_PHYS_ADDR, AU1550_UART3_INT), + }, + [ALCHEMY_CPU_AU1200] = { + PORT(AU1000_UART0_PHYS_ADDR, AU1200_UART0_INT), + PORT(AU1000_UART1_PHYS_ADDR, AU1200_UART1_INT), + }, + [ALCHEMY_CPU_AU1300] = { + PORT(AU1300_UART0_PHYS_ADDR, AU1300_UART0_INT), + PORT(AU1300_UART1_PHYS_ADDR, AU1300_UART1_INT), + PORT(AU1300_UART2_PHYS_ADDR, AU1300_UART2_INT), + PORT(AU1300_UART3_PHYS_ADDR, AU1300_UART3_INT), + }, +}; + +static struct platform_device au1xx0_uart_device = { + .name = "serial8250", + .id = PLAT8250_DEV_AU1X00, +}; + +static void __init alchemy_setup_uarts(int ctype) +{ + long uartclk; + int s = sizeof(struct plat_serial8250_port); + int c = alchemy_get_uarts(ctype); + struct plat_serial8250_port *ports; + struct clk *clk = clk_get(NULL, ALCHEMY_PERIPH_CLK); + + if (IS_ERR(clk)) + return; + if (clk_prepare_enable(clk)) { + clk_put(clk); + return; + } + uartclk = clk_get_rate(clk); + clk_put(clk); + + ports = kcalloc(s, (c + 1), GFP_KERNEL); + if (!ports) { + printk(KERN_INFO "Alchemy: no memory for UART data\n"); + return; + } + memcpy(ports, au1x00_uart_data[ctype], s * c); + au1xx0_uart_device.dev.platform_data = ports; + + /* Fill up uartclk. */ + for (s = 0; s < c; s++) + ports[s].uartclk = uartclk; + if (platform_device_register(&au1xx0_uart_device)) + printk(KERN_INFO "Alchemy: failed to register UARTs\n"); +} + + +/* The dmamask must be set for OHCI/EHCI to work */ +static u64 alchemy_ohci_dmamask = DMA_BIT_MASK(32); +static u64 __maybe_unused alchemy_ehci_dmamask = DMA_BIT_MASK(32); + +/* Power on callback for the ehci platform driver */ +static int alchemy_ehci_power_on(struct platform_device *pdev) +{ + return alchemy_usb_control(ALCHEMY_USB_EHCI0, 1); +} + +/* Power off/suspend callback for the ehci platform driver */ +static void alchemy_ehci_power_off(struct platform_device *pdev) +{ + alchemy_usb_control(ALCHEMY_USB_EHCI0, 0); +} + +static struct usb_ehci_pdata alchemy_ehci_pdata = { + .no_io_watchdog = 1, + .power_on = alchemy_ehci_power_on, + .power_off = alchemy_ehci_power_off, + .power_suspend = alchemy_ehci_power_off, +}; + +/* Power on callback for the ohci platform driver */ +static int alchemy_ohci_power_on(struct platform_device *pdev) +{ + int unit; + + unit = (pdev->id == 1) ? + ALCHEMY_USB_OHCI1 : ALCHEMY_USB_OHCI0; + + return alchemy_usb_control(unit, 1); +} + +/* Power off/suspend callback for the ohci platform driver */ +static void alchemy_ohci_power_off(struct platform_device *pdev) +{ + int unit; + + unit = (pdev->id == 1) ? + ALCHEMY_USB_OHCI1 : ALCHEMY_USB_OHCI0; + + alchemy_usb_control(unit, 0); +} + +static struct usb_ohci_pdata alchemy_ohci_pdata = { + .power_on = alchemy_ohci_power_on, + .power_off = alchemy_ohci_power_off, + .power_suspend = alchemy_ohci_power_off, +}; + +static unsigned long alchemy_ohci_data[][2] __initdata = { + [ALCHEMY_CPU_AU1000] = { AU1000_USB_OHCI_PHYS_ADDR, AU1000_USB_HOST_INT }, + [ALCHEMY_CPU_AU1500] = { AU1000_USB_OHCI_PHYS_ADDR, AU1500_USB_HOST_INT }, + [ALCHEMY_CPU_AU1100] = { AU1000_USB_OHCI_PHYS_ADDR, AU1100_USB_HOST_INT }, + [ALCHEMY_CPU_AU1550] = { AU1550_USB_OHCI_PHYS_ADDR, AU1550_USB_HOST_INT }, + [ALCHEMY_CPU_AU1200] = { AU1200_USB_OHCI_PHYS_ADDR, AU1200_USB_INT }, + [ALCHEMY_CPU_AU1300] = { AU1300_USB_OHCI0_PHYS_ADDR, AU1300_USB_INT }, +}; + +static unsigned long alchemy_ehci_data[][2] __initdata = { + [ALCHEMY_CPU_AU1200] = { AU1200_USB_EHCI_PHYS_ADDR, AU1200_USB_INT }, + [ALCHEMY_CPU_AU1300] = { AU1300_USB_EHCI_PHYS_ADDR, AU1300_USB_INT }, +}; + +static int __init _new_usbres(struct resource **r, struct platform_device **d) +{ + *r = kcalloc(2, sizeof(struct resource), GFP_KERNEL); + if (!*r) + return -ENOMEM; + *d = kzalloc(sizeof(struct platform_device), GFP_KERNEL); + if (!*d) { + kfree(*r); + return -ENOMEM; + } + + (*d)->dev.coherent_dma_mask = DMA_BIT_MASK(32); + (*d)->num_resources = 2; + (*d)->resource = *r; + + return 0; +} + +static void __init alchemy_setup_usb(int ctype) +{ + struct resource *res; + struct platform_device *pdev; + + /* setup OHCI0. Every variant has one */ + if (_new_usbres(&res, &pdev)) + return; + + res[0].start = alchemy_ohci_data[ctype][0]; + res[0].end = res[0].start + 0x100 - 1; + res[0].flags = IORESOURCE_MEM; + res[1].start = alchemy_ohci_data[ctype][1]; + res[1].end = res[1].start; + res[1].flags = IORESOURCE_IRQ; + pdev->name = "ohci-platform"; + pdev->id = 0; + pdev->dev.dma_mask = &alchemy_ohci_dmamask; + pdev->dev.platform_data = &alchemy_ohci_pdata; + + if (platform_device_register(pdev)) + printk(KERN_INFO "Alchemy USB: cannot add OHCI0\n"); + + + /* setup EHCI0: Au1200/Au1300 */ + if ((ctype == ALCHEMY_CPU_AU1200) || (ctype == ALCHEMY_CPU_AU1300)) { + if (_new_usbres(&res, &pdev)) + return; + + res[0].start = alchemy_ehci_data[ctype][0]; + res[0].end = res[0].start + 0x100 - 1; + res[0].flags = IORESOURCE_MEM; + res[1].start = alchemy_ehci_data[ctype][1]; + res[1].end = res[1].start; + res[1].flags = IORESOURCE_IRQ; + pdev->name = "ehci-platform"; + pdev->id = 0; + pdev->dev.dma_mask = &alchemy_ehci_dmamask; + pdev->dev.platform_data = &alchemy_ehci_pdata; + + if (platform_device_register(pdev)) + printk(KERN_INFO "Alchemy USB: cannot add EHCI0\n"); + } + + /* Au1300: OHCI1 */ + if (ctype == ALCHEMY_CPU_AU1300) { + if (_new_usbres(&res, &pdev)) + return; + + res[0].start = AU1300_USB_OHCI1_PHYS_ADDR; + res[0].end = res[0].start + 0x100 - 1; + res[0].flags = IORESOURCE_MEM; + res[1].start = AU1300_USB_INT; + res[1].end = res[1].start; + res[1].flags = IORESOURCE_IRQ; + pdev->name = "ohci-platform"; + pdev->id = 1; + pdev->dev.dma_mask = &alchemy_ohci_dmamask; + pdev->dev.platform_data = &alchemy_ohci_pdata; + + if (platform_device_register(pdev)) + printk(KERN_INFO "Alchemy USB: cannot add OHCI1\n"); + } +} + +/* Macro to help defining the Ethernet MAC resources */ +#define MAC_RES_COUNT 4 /* MAC regs, MAC en, MAC INT, MACDMA regs */ +#define MAC_RES(_base, _enable, _irq, _macdma) \ + { \ + .start = _base, \ + .end = _base + 0xffff, \ + .flags = IORESOURCE_MEM, \ + }, \ + { \ + .start = _enable, \ + .end = _enable + 0x3, \ + .flags = IORESOURCE_MEM, \ + }, \ + { \ + .start = _irq, \ + .end = _irq, \ + .flags = IORESOURCE_IRQ \ + }, \ + { \ + .start = _macdma, \ + .end = _macdma + 0x1ff, \ + .flags = IORESOURCE_MEM, \ + } + +static struct resource au1xxx_eth0_resources[][MAC_RES_COUNT] __initdata = { + [ALCHEMY_CPU_AU1000] = { + MAC_RES(AU1000_MAC0_PHYS_ADDR, + AU1000_MACEN_PHYS_ADDR, + AU1000_MAC0_DMA_INT, + AU1000_MACDMA0_PHYS_ADDR) + }, + [ALCHEMY_CPU_AU1500] = { + MAC_RES(AU1500_MAC0_PHYS_ADDR, + AU1500_MACEN_PHYS_ADDR, + AU1500_MAC0_DMA_INT, + AU1000_MACDMA0_PHYS_ADDR) + }, + [ALCHEMY_CPU_AU1100] = { + MAC_RES(AU1000_MAC0_PHYS_ADDR, + AU1000_MACEN_PHYS_ADDR, + AU1100_MAC0_DMA_INT, + AU1000_MACDMA0_PHYS_ADDR) + }, + [ALCHEMY_CPU_AU1550] = { + MAC_RES(AU1000_MAC0_PHYS_ADDR, + AU1000_MACEN_PHYS_ADDR, + AU1550_MAC0_DMA_INT, + AU1000_MACDMA0_PHYS_ADDR) + }, +}; + +static struct au1000_eth_platform_data au1xxx_eth0_platform_data = { + .phy1_search_mac0 = 1, +}; + +static struct platform_device au1xxx_eth0_device = { + .name = "au1000-eth", + .id = 0, + .num_resources = MAC_RES_COUNT, + .dev.platform_data = &au1xxx_eth0_platform_data, +}; + +static struct resource au1xxx_eth1_resources[][MAC_RES_COUNT] __initdata = { + [ALCHEMY_CPU_AU1000] = { + MAC_RES(AU1000_MAC1_PHYS_ADDR, + AU1000_MACEN_PHYS_ADDR + 4, + AU1000_MAC1_DMA_INT, + AU1000_MACDMA1_PHYS_ADDR) + }, + [ALCHEMY_CPU_AU1500] = { + MAC_RES(AU1500_MAC1_PHYS_ADDR, + AU1500_MACEN_PHYS_ADDR + 4, + AU1500_MAC1_DMA_INT, + AU1000_MACDMA1_PHYS_ADDR) + }, + [ALCHEMY_CPU_AU1550] = { + MAC_RES(AU1000_MAC1_PHYS_ADDR, + AU1000_MACEN_PHYS_ADDR + 4, + AU1550_MAC1_DMA_INT, + AU1000_MACDMA1_PHYS_ADDR) + }, +}; + +static struct au1000_eth_platform_data au1xxx_eth1_platform_data = { + .phy1_search_mac0 = 1, +}; + +static struct platform_device au1xxx_eth1_device = { + .name = "au1000-eth", + .id = 1, + .num_resources = MAC_RES_COUNT, + .dev.platform_data = &au1xxx_eth1_platform_data, +}; + +void __init au1xxx_override_eth_cfg(unsigned int port, + struct au1000_eth_platform_data *eth_data) +{ + if (!eth_data || port > 1) + return; + + if (port == 0) + memcpy(&au1xxx_eth0_platform_data, eth_data, + sizeof(struct au1000_eth_platform_data)); + else + memcpy(&au1xxx_eth1_platform_data, eth_data, + sizeof(struct au1000_eth_platform_data)); +} + +static void __init alchemy_setup_macs(int ctype) +{ + int ret, i; + unsigned char ethaddr[6]; + struct resource *macres; + + /* Handle 1st MAC */ + if (alchemy_get_macs(ctype) < 1) + return; + + macres = kmemdup(au1xxx_eth0_resources[ctype], + sizeof(struct resource) * MAC_RES_COUNT, GFP_KERNEL); + if (!macres) { + printk(KERN_INFO "Alchemy: no memory for MAC0 resources\n"); + return; + } + au1xxx_eth0_device.resource = macres; + + i = prom_get_ethernet_addr(ethaddr); + if (!i && !is_valid_ether_addr(au1xxx_eth0_platform_data.mac)) + memcpy(au1xxx_eth0_platform_data.mac, ethaddr, 6); + + ret = platform_device_register(&au1xxx_eth0_device); + if (ret) + printk(KERN_INFO "Alchemy: failed to register MAC0\n"); + + + /* Handle 2nd MAC */ + if (alchemy_get_macs(ctype) < 2) + return; + + macres = kmemdup(au1xxx_eth1_resources[ctype], + sizeof(struct resource) * MAC_RES_COUNT, GFP_KERNEL); + if (!macres) { + printk(KERN_INFO "Alchemy: no memory for MAC1 resources\n"); + return; + } + au1xxx_eth1_device.resource = macres; + + ethaddr[5] += 1; /* next addr for 2nd MAC */ + if (!i && !is_valid_ether_addr(au1xxx_eth1_platform_data.mac)) + memcpy(au1xxx_eth1_platform_data.mac, ethaddr, 6); + + /* Register second MAC if enabled in pinfunc */ + if (!(alchemy_rdsys(AU1000_SYS_PINFUNC) & SYS_PF_NI2)) { + ret = platform_device_register(&au1xxx_eth1_device); + if (ret) + printk(KERN_INFO "Alchemy: failed to register MAC1\n"); + } +} + +static int __init au1xxx_platform_init(void) +{ + int ctype = alchemy_get_cputype(); + + alchemy_setup_uarts(ctype); + alchemy_setup_macs(ctype); + alchemy_setup_usb(ctype); + + return 0; +} + +arch_initcall(au1xxx_platform_init); |