summaryrefslogtreecommitdiffstats
path: root/arch/mips/sibyte/Kconfig
diff options
context:
space:
mode:
Diffstat (limited to 'arch/mips/sibyte/Kconfig')
-rw-r--r--arch/mips/sibyte/Kconfig167
1 files changed, 167 insertions, 0 deletions
diff --git a/arch/mips/sibyte/Kconfig b/arch/mips/sibyte/Kconfig
new file mode 100644
index 000000000..7ec278d72
--- /dev/null
+++ b/arch/mips/sibyte/Kconfig
@@ -0,0 +1,167 @@
+# SPDX-License-Identifier: GPL-2.0
+config SIBYTE_SB1250
+ bool
+ select CEVT_SB1250
+ select CSRC_SB1250
+ select HW_HAS_PCI
+ select IRQ_MIPS_CPU
+ select SIBYTE_ENABLE_LDT_IF_PCI
+ select SIBYTE_HAS_ZBUS_PROFILING
+ select SIBYTE_SB1xxx_SOC
+ select SYS_SUPPORTS_SMP
+
+config SIBYTE_BCM1120
+ bool
+ select CEVT_SB1250
+ select CSRC_SB1250
+ select IRQ_MIPS_CPU
+ select SIBYTE_BCM112X
+ select SIBYTE_HAS_ZBUS_PROFILING
+ select SIBYTE_SB1xxx_SOC
+
+config SIBYTE_BCM1125
+ bool
+ select CEVT_SB1250
+ select CSRC_SB1250
+ select HW_HAS_PCI
+ select IRQ_MIPS_CPU
+ select SIBYTE_BCM112X
+ select SIBYTE_HAS_ZBUS_PROFILING
+ select SIBYTE_SB1xxx_SOC
+
+config SIBYTE_BCM1125H
+ bool
+ select CEVT_SB1250
+ select CSRC_SB1250
+ select HW_HAS_PCI
+ select IRQ_MIPS_CPU
+ select SIBYTE_BCM112X
+ select SIBYTE_ENABLE_LDT_IF_PCI
+ select SIBYTE_HAS_ZBUS_PROFILING
+ select SIBYTE_SB1xxx_SOC
+
+config SIBYTE_BCM112X
+ bool
+ select CEVT_SB1250
+ select CSRC_SB1250
+ select IRQ_MIPS_CPU
+ select SIBYTE_SB1xxx_SOC
+ select SIBYTE_HAS_ZBUS_PROFILING
+
+config SIBYTE_BCM1x80
+ bool
+ select CEVT_BCM1480
+ select CSRC_BCM1480
+ select HW_HAS_PCI
+ select IRQ_MIPS_CPU
+ select SIBYTE_HAS_ZBUS_PROFILING
+ select SIBYTE_SB1xxx_SOC
+ select SYS_SUPPORTS_SMP
+
+config SIBYTE_BCM1x55
+ bool
+ select CEVT_BCM1480
+ select CSRC_BCM1480
+ select HW_HAS_PCI
+ select IRQ_MIPS_CPU
+ select SIBYTE_SB1xxx_SOC
+ select SIBYTE_HAS_ZBUS_PROFILING
+ select SYS_SUPPORTS_SMP
+
+config SIBYTE_SB1xxx_SOC
+ bool
+ select IRQ_MIPS_CPU
+ select SWAP_IO_SPACE
+ select SYS_SUPPORTS_32BIT_KERNEL
+ select SYS_SUPPORTS_64BIT_KERNEL
+ select FW_CFE
+ select SYS_HAS_EARLY_PRINTK
+
+choice
+ prompt "SiByte SOC Stepping"
+ depends on SIBYTE_SB1xxx_SOC
+
+config CPU_SB1_PASS_2_1250
+ bool "1250 An"
+ depends on SIBYTE_SB1250
+ select CPU_SB1_PASS_2
+ help
+ Also called BCM1250 Pass 2
+
+config CPU_SB1_PASS_2_2
+ bool "1250 Bn"
+ depends on SIBYTE_SB1250
+ select CPU_HAS_PREFETCH
+ help
+ Also called BCM1250 Pass 2.2
+
+config CPU_SB1_PASS_4
+ bool "1250 Cn"
+ depends on SIBYTE_SB1250
+ select CPU_HAS_PREFETCH
+ help
+ Also called BCM1250 Pass 3
+
+config CPU_SB1_PASS_2_112x
+ bool "112x Hybrid"
+ depends on SIBYTE_BCM112X
+ select CPU_SB1_PASS_2
+
+config CPU_SB1_PASS_3
+ bool "112x An"
+ depends on SIBYTE_BCM112X
+ select CPU_HAS_PREFETCH
+
+endchoice
+
+config CPU_SB1_PASS_2
+ bool
+
+config SIBYTE_HAS_LDT
+ bool
+
+config SIBYTE_ENABLE_LDT_IF_PCI
+ bool
+ select SIBYTE_HAS_LDT if PCI
+
+config SB1_CEX_ALWAYS_FATAL
+ bool "All cache exceptions considered fatal (no recovery attempted)"
+ depends on SIBYTE_SB1xxx_SOC
+
+config SB1_CERR_STALL
+ bool "Stall (rather than panic) on fatal cache error"
+ depends on SIBYTE_SB1xxx_SOC
+
+config SIBYTE_CFE_CONSOLE
+ bool "Use firmware console"
+ depends on SIBYTE_SB1xxx_SOC
+ help
+ Use the CFE API's console write routines during boot. Other console
+ options (VT console, sb1250 duart console, etc.) should not be
+ configured.
+
+config SIBYTE_BUS_WATCHER
+ bool "Support for Bus Watcher statistics"
+ depends on SIBYTE_SB1xxx_SOC && \
+ (SIBYTE_BCM112X || SIBYTE_SB1250 || \
+ SIBYTE_BCM1x55 || SIBYTE_BCM1x80)
+ help
+ Handle and keep statistics on the bus error interrupts (COR_ECC,
+ BAD_ECC, IO_BUS).
+
+config SIBYTE_BW_TRACE
+ bool "Capture bus trace before bus error"
+ depends on SIBYTE_BUS_WATCHER
+ help
+ Run a continuous bus trace, dumping the raw data as soon as
+ a ZBbus error is detected. Cannot work if ZBbus profiling
+ is turned on, and also will interfere with JTAG-based trace
+ buffer activity. Raw buffer data is dumped to console, and
+ must be processed off-line.
+
+config SIBYTE_TBPROF
+ tristate "Support for ZBbus profiling"
+ depends on SIBYTE_HAS_ZBUS_PROFILING
+
+config SIBYTE_HAS_ZBUS_PROFILING
+ bool