diff options
Diffstat (limited to 'drivers/block/paride')
28 files changed, 10635 insertions, 0 deletions
diff --git a/drivers/block/paride/Kconfig b/drivers/block/paride/Kconfig new file mode 100644 index 000000000..f8bd6ef36 --- /dev/null +++ b/drivers/block/paride/Kconfig @@ -0,0 +1,303 @@ +# SPDX-License-Identifier: GPL-2.0 +# +# PARIDE configuration +# +# PARIDE doesn't need PARPORT, but if PARPORT is configured as a module, +# PARIDE must also be a module. +# PARIDE only supports PC style parports. Tough for USB or other parports... + +comment "Parallel IDE high-level drivers" + depends on PARIDE + +config PARIDE_PD + tristate "Parallel port IDE disks" + depends on PARIDE + help + This option enables the high-level driver for IDE-type disk devices + connected through a parallel port. If you chose to build PARIDE + support into your kernel, you may answer Y here to build in the + parallel port IDE driver, otherwise you should answer M to build + it as a loadable module. The module will be called pd. You + must also have at least one parallel port protocol driver in your + system. Among the devices supported by this driver are the SyQuest + EZ-135, EZ-230 and SparQ drives, the Avatar Shark and the backpack + hard drives from MicroSolutions. + +config PARIDE_PCD + tristate "Parallel port ATAPI CD-ROMs" + depends on PARIDE + select CDROM + select BLK_SCSI_REQUEST # only for the generic cdrom code + ---help--- + This option enables the high-level driver for ATAPI CD-ROM devices + connected through a parallel port. If you chose to build PARIDE + support into your kernel, you may answer Y here to build in the + parallel port ATAPI CD-ROM driver, otherwise you should answer M to + build it as a loadable module. The module will be called pcd. You + must also have at least one parallel port protocol driver in your + system. Among the devices supported by this driver are the + MicroSolutions backpack CD-ROM drives and the Freecom Power CD. If + you have such a CD-ROM drive, you should also say Y or M to "ISO + 9660 CD-ROM file system support" below, because that's the file + system used on CD-ROMs. + +config PARIDE_PF + tristate "Parallel port ATAPI disks" + depends on PARIDE + help + This option enables the high-level driver for ATAPI disk devices + connected through a parallel port. If you chose to build PARIDE + support into your kernel, you may answer Y here to build in the + parallel port ATAPI disk driver, otherwise you should answer M + to build it as a loadable module. The module will be called pf. + You must also have at least one parallel port protocol driver in + your system. Among the devices supported by this driver are the + MicroSolutions backpack PD/CD drive and the Imation Superdisk + LS-120 drive. + +config PARIDE_PT + tristate "Parallel port ATAPI tapes" + depends on PARIDE + help + This option enables the high-level driver for ATAPI tape devices + connected through a parallel port. If you chose to build PARIDE + support into your kernel, you may answer Y here to build in the + parallel port ATAPI disk driver, otherwise you should answer M + to build it as a loadable module. The module will be called pt. + You must also have at least one parallel port protocol driver in + your system. Among the devices supported by this driver is the + parallel port version of the HP 5GB drive. + +config PARIDE_PG + tristate "Parallel port generic ATAPI devices" + depends on PARIDE + ---help--- + This option enables a special high-level driver for generic ATAPI + devices connected through a parallel port. The driver allows user + programs, such as cdrtools, to send ATAPI commands directly to a + device. + + If you chose to build PARIDE support into your kernel, you may + answer Y here to build in the parallel port generic ATAPI driver, + otherwise you should answer M to build it as a loadable module. The + module will be called pg. + + You must also have at least one parallel port protocol driver in + your system. + + This driver implements an API loosely related to the generic SCSI + driver. See <file:include/linux/pg.h>. for details. + + You can obtain the most recent version of cdrtools from + <ftp://ftp.berlios.de/pub/cdrecord/>. Versions 1.6.1a3 and + later fully support this driver. + +comment "Parallel IDE protocol modules" + depends on PARIDE + +config PARIDE_ATEN + tristate "ATEN EH-100 protocol" + depends on PARIDE + help + This option enables support for the ATEN EH-100 parallel port IDE + protocol. This protocol is used in some inexpensive low performance + parallel port kits made in Hong Kong. If you chose to build PARIDE + support into your kernel, you may answer Y here to build in the + protocol driver, otherwise you should answer M to build it as a + loadable module. The module will be called aten. You must also + have a high-level driver for the type of device that you want to + support. + +config PARIDE_BPCK + tristate "MicroSolutions backpack (Series 5) protocol" + depends on PARIDE + ---help--- + This option enables support for the Micro Solutions BACKPACK + parallel port Series 5 IDE protocol. (Most BACKPACK drives made + before 1999 were Series 5) Series 5 drives will NOT always have the + Series noted on the bottom of the drive. Series 6 drivers will. + + In other words, if your BACKPACK drive doesn't say "Series 6" on the + bottom, enable this option. + + If you chose to build PARIDE support into your kernel, you may + answer Y here to build in the protocol driver, otherwise you should + answer M to build it as a loadable module. The module will be + called bpck. You must also have a high-level driver for the type + of device that you want to support. + +config PARIDE_BPCK6 + tristate "MicroSolutions backpack (Series 6) protocol" + depends on PARIDE && !64BIT + ---help--- + This option enables support for the Micro Solutions BACKPACK + parallel port Series 6 IDE protocol. (Most BACKPACK drives made + after 1999 were Series 6) Series 6 drives will have the Series noted + on the bottom of the drive. Series 5 drivers don't always have it + noted. + + In other words, if your BACKPACK drive says "Series 6" on the + bottom, enable this option. + + If you chose to build PARIDE support into your kernel, you may + answer Y here to build in the protocol driver, otherwise you should + answer M to build it as a loadable module. The module will be + called bpck6. You must also have a high-level driver for the type + of device that you want to support. + +config PARIDE_COMM + tristate "DataStor Commuter protocol" + depends on PARIDE + help + This option enables support for the Commuter parallel port IDE + protocol from DataStor. If you chose to build PARIDE support + into your kernel, you may answer Y here to build in the protocol + driver, otherwise you should answer M to build it as a loadable + module. The module will be called comm. You must also have + a high-level driver for the type of device that you want to support. + +config PARIDE_DSTR + tristate "DataStor EP-2000 protocol" + depends on PARIDE + help + This option enables support for the EP-2000 parallel port IDE + protocol from DataStor. If you chose to build PARIDE support + into your kernel, you may answer Y here to build in the protocol + driver, otherwise you should answer M to build it as a loadable + module. The module will be called dstr. You must also have + a high-level driver for the type of device that you want to support. + +config PARIDE_FIT2 + tristate "FIT TD-2000 protocol" + depends on PARIDE + help + This option enables support for the TD-2000 parallel port IDE + protocol from Fidelity International Technology. This is a simple + (low speed) adapter that is used in some portable hard drives. If + you chose to build PARIDE support into your kernel, you may answer Y + here to build in the protocol driver, otherwise you should answer M + to build it as a loadable module. The module will be called ktti. + You must also have a high-level driver for the type of device that + you want to support. + +config PARIDE_FIT3 + tristate "FIT TD-3000 protocol" + depends on PARIDE + help + This option enables support for the TD-3000 parallel port IDE + protocol from Fidelity International Technology. This protocol is + used in newer models of their portable disk, CD-ROM and PD/CD + devices. If you chose to build PARIDE support into your kernel, you + may answer Y here to build in the protocol driver, otherwise you + should answer M to build it as a loadable module. The module will be + called fit3. You must also have a high-level driver for the type + of device that you want to support. + +config PARIDE_EPAT + tristate "Shuttle EPAT/EPEZ protocol" + depends on PARIDE + help + This option enables support for the EPAT parallel port IDE protocol. + EPAT is a parallel port IDE adapter manufactured by Shuttle + Technology and widely used in devices from major vendors such as + Hewlett-Packard, SyQuest, Imation and Avatar. If you chose to build + PARIDE support into your kernel, you may answer Y here to build in + the protocol driver, otherwise you should answer M to build it as a + loadable module. The module will be called epat. You must also + have a high-level driver for the type of device that you want to + support. + +config PARIDE_EPATC8 + bool "Support c7/c8 chips" + depends on PARIDE_EPAT + help + This option enables support for the newer Shuttle EP1284 (aka c7 and + c8) chip. You need this if you are using any recent Imation SuperDisk + (LS-120) drive. + +config PARIDE_EPIA + tristate "Shuttle EPIA protocol" + depends on PARIDE + help + This option enables support for the (obsolete) EPIA parallel port + IDE protocol from Shuttle Technology. This adapter can still be + found in some no-name kits. If you chose to build PARIDE support + into your kernel, you may answer Y here to build in the protocol + driver, otherwise you should answer M to build it as a loadable + module. The module will be called epia. You must also have a + high-level driver for the type of device that you want to support. + +config PARIDE_FRIQ + tristate "Freecom IQ ASIC-2 protocol" + depends on PARIDE + help + This option enables support for version 2 of the Freecom IQ parallel + port IDE adapter. This adapter is used by the Maxell Superdisk + drive. If you chose to build PARIDE support into your kernel, you + may answer Y here to build in the protocol driver, otherwise you + should answer M to build it as a loadable module. The module will be + called friq. You must also have a high-level driver for the type + of device that you want to support. + +config PARIDE_FRPW + tristate "FreeCom power protocol" + depends on PARIDE + help + This option enables support for the Freecom power parallel port IDE + protocol. If you chose to build PARIDE support into your kernel, you + may answer Y here to build in the protocol driver, otherwise you + should answer M to build it as a loadable module. The module will be + called frpw. You must also have a high-level driver for the type + of device that you want to support. + +config PARIDE_KBIC + tristate "KingByte KBIC-951A/971A protocols" + depends on PARIDE + help + This option enables support for the KBIC-951A and KBIC-971A parallel + port IDE protocols from KingByte Information Corp. KingByte's + adapters appear in many no-name portable disk and CD-ROM products, + especially in Europe. If you chose to build PARIDE support into your + kernel, you may answer Y here to build in the protocol driver, + otherwise you should answer M to build it as a loadable module. The + module will be called kbic. You must also have a high-level driver + for the type of device that you want to support. + +config PARIDE_KTTI + tristate "KT PHd protocol" + depends on PARIDE + help + This option enables support for the "PHd" parallel port IDE protocol + from KT Technology. This is a simple (low speed) adapter that is + used in some 2.5" portable hard drives. If you chose to build PARIDE + support into your kernel, you may answer Y here to build in the + protocol driver, otherwise you should answer M to build it as a + loadable module. The module will be called ktti. You must also + have a high-level driver for the type of device that you want to + support. + +config PARIDE_ON20 + tristate "OnSpec 90c20 protocol" + depends on PARIDE + help + This option enables support for the (obsolete) 90c20 parallel port + IDE protocol from OnSpec (often marketed under the ValuStore brand + name). If you chose to build PARIDE support into your kernel, you + may answer Y here to build in the protocol driver, otherwise you + should answer M to build it as a loadable module. The module will + be called on20. You must also have a high-level driver for the + type of device that you want to support. + +config PARIDE_ON26 + tristate "OnSpec 90c26 protocol" + depends on PARIDE + help + This option enables support for the 90c26 parallel port IDE protocol + from OnSpec Electronics (often marketed under the ValuStore brand + name). If you chose to build PARIDE support into your kernel, you + may answer Y here to build in the protocol driver, otherwise you + should answer M to build it as a loadable module. The module will be + called on26. You must also have a high-level driver for the type + of device that you want to support. + +# diff --git a/drivers/block/paride/Makefile b/drivers/block/paride/Makefile new file mode 100644 index 000000000..cf1742a84 --- /dev/null +++ b/drivers/block/paride/Makefile @@ -0,0 +1,29 @@ +# SPDX-License-Identifier: GPL-2.0 +# +# Makefile for Parallel port IDE device drivers. +# +# 7 October 2000, Bartlomiej Zolnierkiewicz <bkz@linux-ide.org> +# Rewritten to use lists instead of if-statements. +# + +obj-$(CONFIG_PARIDE) += paride.o +obj-$(CONFIG_PARIDE_ATEN) += aten.o +obj-$(CONFIG_PARIDE_BPCK) += bpck.o +obj-$(CONFIG_PARIDE_COMM) += comm.o +obj-$(CONFIG_PARIDE_DSTR) += dstr.o +obj-$(CONFIG_PARIDE_KBIC) += kbic.o +obj-$(CONFIG_PARIDE_EPAT) += epat.o +obj-$(CONFIG_PARIDE_EPIA) += epia.o +obj-$(CONFIG_PARIDE_FRPW) += frpw.o +obj-$(CONFIG_PARIDE_FRIQ) += friq.o +obj-$(CONFIG_PARIDE_FIT2) += fit2.o +obj-$(CONFIG_PARIDE_FIT3) += fit3.o +obj-$(CONFIG_PARIDE_ON20) += on20.o +obj-$(CONFIG_PARIDE_ON26) += on26.o +obj-$(CONFIG_PARIDE_KTTI) += ktti.o +obj-$(CONFIG_PARIDE_BPCK6) += bpck6.o +obj-$(CONFIG_PARIDE_PD) += pd.o +obj-$(CONFIG_PARIDE_PCD) += pcd.o +obj-$(CONFIG_PARIDE_PF) += pf.o +obj-$(CONFIG_PARIDE_PT) += pt.o +obj-$(CONFIG_PARIDE_PG) += pg.o diff --git a/drivers/block/paride/Transition-notes b/drivers/block/paride/Transition-notes new file mode 100644 index 000000000..70374907c --- /dev/null +++ b/drivers/block/paride/Transition-notes @@ -0,0 +1,128 @@ +Lemma 1: + If ps_tq is scheduled, ps_tq_active is 1. ps_tq_int() can be called + only when ps_tq_active is 1. +Proof: All assignments to ps_tq_active and all scheduling of ps_tq happen + under ps_spinlock. There are three places where that can happen: + one in ps_set_intr() (A) and two in ps_tq_int() (B and C). + Consider the sequnce of these events. A can not be preceded by + anything except B, since it is under if (!ps_tq_active) under + ps_spinlock. C is always preceded by B, since we can't reach it + other than through B and we don't drop ps_spinlock between them. + IOW, the sequence is A?(BA|BC|B)*. OTOH, number of B can not exceed + the sum of numbers of A and C, since each call of ps_tq_int() is + the result of ps_tq execution. Therefore, the sequence starts with + A and each B is preceded by either A or C. Moments when we enter + ps_tq_int() are sandwiched between {A,C} and B in that sequence, + since at any time number of B can not exceed the number of these + moments which, in turn, can not exceed the number of A and C. + In other words, the sequence of events is (A or C set ps_tq_active to + 1 and schedule ps_tq, ps_tq is executed, ps_tq_int() is entered, + B resets ps_tq_active)*. + + +consider the following area: + * in do_pd_request1(): to calls of pi_do_claimed() and return in + case when pd_req is NULL. + * in next_request(): to call of do_pd_request1() + * in do_pd_read(): to call of ps_set_intr() + * in do_pd_read_start(): to calls of pi_do_claimed(), next_request() +and ps_set_intr() + * in do_pd_read_drq(): to calls of pi_do_claimed() and next_request() + * in do_pd_write(): to call of ps_set_intr() + * in do_pd_write_start(): to calls of pi_do_claimed(), next_request() +and ps_set_intr() + * in do_pd_write_done(): to calls of pi_do_claimed() and next_request() + * in ps_set_intr(): to check for ps_tq_active and to scheduling + ps_tq if ps_tq_active was 0. + * in ps_tq_int(): from the moment when we get ps_spinlock() to the + return, call of con() or scheduling ps_tq. + * in pi_schedule_claimed() when called from pi_do_claimed() called from + pd.c, everything until returning 1 or setting or setting ->claim_cont + on the path that returns 0 + * in pi_do_claimed() when called from pd.c, everything until the call + of pi_do_claimed() plus the everything until the call of cont() if + pi_do_claimed() has returned 1. + * in pi_wake_up() called for PIA that belongs to pd.c, everything from + the moment when pi_spinlock has been acquired. + +Lemma 2: + 1) at any time at most one thread of execution can be in that area or + be preempted there. + 2) When there is such a thread, pd_busy is set or pd_lock is held by + that thread. + 3) When there is such a thread, ps_tq_active is 0 or ps_spinlock is + held by that thread. + 4) When there is such a thread, all PIA belonging to pd.c have NULL + ->claim_cont or pi_spinlock is held by thread in question. + +Proof: consider the first moment when the above is not true. + +(1) can become not true if some thread enters that area while another is there. + a) do_pd_request1() can be called from next_request() or do_pd_request() + In the first case the thread was already in the area. In the second, + the thread was holding pd_lock and found pd_busy not set, which would + mean that (2) was already not true. + b) ps_set_intr() and pi_schedule_claimed() can be called only from the + area. + c) pi_do_claimed() is called by pd.c only from the area. + d) ps_tq_int() can enter the area only when the thread is holding + ps_spinlock and ps_tq_active is 1 (due to Lemma 1). It means that + (3) was already not true. + e) do_pd_{read,write}* could be called only from the area. The only + case that needs consideration is call from pi_wake_up() and there + we would have to be called for the PIA that got ->claimed_cont + from pd.c. That could happen only if pi_do_claimed() had been + called from pd.c for that PIA, which happens only for PIA belonging + to pd.c. + f) pi_wake_up() can enter the area only when the thread is holding + pi_spinlock and ->claimed_cont is non-NULL for PIA belonging to + pd.c. It means that (4) was already not true. + +(2) can become not true only when pd_lock is released by the thread in question. + Indeed, pd_busy is reset only in the area and thread that resets + it is holding pd_lock. The only place within the area where we + release pd_lock is in pd_next_buf() (called from within the area). + But that code does not reset pd_busy, so pd_busy would have to be + 0 when pd_next_buf() had acquired pd_lock. If it become 0 while + we were acquiring the lock, (1) would be already false, since + the thread that had reset it would be in the area simulateously. + If it was 0 before we tried to acquire pd_lock, (2) would be + already false. + +For similar reasons, (3) can become not true only when ps_spinlock is released +by the thread in question. However, all such places within the area are right +after resetting ps_tq_active to 0. + +(4) is done the same way - all places where we release pi_spinlock within +the area are either after resetting ->claimed_cont to NULL while holding +pi_spinlock, or after not tocuhing ->claimed_cont since acquiring pi_spinlock +also in the area. The only place where ->claimed_cont is made non-NULL is +in the area, under pi_spinlock and we do not release it until after leaving +the area. + +QED. + + +Corollary 1: ps_tq_active can be killed. Indeed, the only place where we +check its value is in ps_set_intr() and if it had been non-zero at that +point, we would have violated either (2.1) (if it was set while ps_set_intr() +was acquiring ps_spinlock) or (2.3) (if it was set when we started to +acquire ps_spinlock). + +Corollary 2: ps_spinlock can be killed. Indeed, Lemma 1 and Lemma 2 show +that the only possible contention is between scheduling ps_tq followed by +immediate release of spinlock and beginning of execution of ps_tq on +another CPU. + +Corollary 3: assignment to pd_busy in do_pd_read_start() and do_pd_write_start() +can be killed. Indeed, we are not holding pd_lock and thus pd_busy is already +1 here. + +Corollary 4: in ps_tq_int() uses of con can be replaced with uses of +ps_continuation, since the latter is changed only from the area. +We don't need to reset it to NULL, since we are guaranteed that there +will be a call of ps_set_intr() before we look at ps_continuation again. +We can remove the check for ps_continuation being NULL for the same +reason - the value is guaranteed to be set by the last ps_set_intr() and +we never pass it NULL. Assignements in the beginning of ps_set_intr() +can be taken to callers as long as they remain within the area. diff --git a/drivers/block/paride/aten.c b/drivers/block/paride/aten.c new file mode 100644 index 000000000..269546556 --- /dev/null +++ b/drivers/block/paride/aten.c @@ -0,0 +1,162 @@ +/* + aten.c (c) 1997-8 Grant R. Guenther <grant@torque.net> + Under the terms of the GNU General Public License. + + aten.c is a low-level protocol driver for the ATEN EH-100 + parallel port adapter. The EH-100 supports 4-bit and 8-bit + modes only. There is also an EH-132 which supports EPP mode + transfers. The EH-132 is not yet supported. + +*/ + +/* Changes: + + 1.01 GRG 1998.05.05 init_proto, release_proto + +*/ + +#define ATEN_VERSION "1.01" + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/kernel.h> +#include <linux/wait.h> +#include <linux/types.h> +#include <asm/io.h> + +#include "paride.h" + +#define j44(a,b) ((((a>>4)&0x0f)|(b&0xf0))^0x88) + +/* cont = 0 - access the IDE register file + cont = 1 - access the IDE command set +*/ + +static int cont_map[2] = { 0x08, 0x20 }; + +static void aten_write_regr( PIA *pi, int cont, int regr, int val) + +{ int r; + + r = regr + cont_map[cont] + 0x80; + + w0(r); w2(0xe); w2(6); w0(val); w2(7); w2(6); w2(0xc); +} + +static int aten_read_regr( PIA *pi, int cont, int regr ) + +{ int a, b, r; + + r = regr + cont_map[cont] + 0x40; + + switch (pi->mode) { + + case 0: w0(r); w2(0xe); w2(6); + w2(7); w2(6); w2(0); + a = r1(); w0(0x10); b = r1(); w2(0xc); + return j44(a,b); + + case 1: r |= 0x10; + w0(r); w2(0xe); w2(6); w0(0xff); + w2(0x27); w2(0x26); w2(0x20); + a = r0(); + w2(0x26); w2(0xc); + return a; + } + return -1; +} + +static void aten_read_block( PIA *pi, char * buf, int count ) + +{ int k, a, b, c, d; + + switch (pi->mode) { + + case 0: w0(0x48); w2(0xe); w2(6); + for (k=0;k<count/2;k++) { + w2(7); w2(6); w2(2); + a = r1(); w0(0x58); b = r1(); + w2(0); d = r1(); w0(0x48); c = r1(); + buf[2*k] = j44(c,d); + buf[2*k+1] = j44(a,b); + } + w2(0xc); + break; + + case 1: w0(0x58); w2(0xe); w2(6); + for (k=0;k<count/2;k++) { + w2(0x27); w2(0x26); w2(0x22); + a = r0(); w2(0x20); b = r0(); + buf[2*k] = b; buf[2*k+1] = a; + } + w2(0x26); w2(0xc); + break; + } +} + +static void aten_write_block( PIA *pi, char * buf, int count ) + +{ int k; + + w0(0x88); w2(0xe); w2(6); + for (k=0;k<count/2;k++) { + w0(buf[2*k+1]); w2(0xe); w2(6); + w0(buf[2*k]); w2(7); w2(6); + } + w2(0xc); +} + +static void aten_connect ( PIA *pi ) + +{ pi->saved_r0 = r0(); + pi->saved_r2 = r2(); + w2(0xc); +} + +static void aten_disconnect ( PIA *pi ) + +{ w0(pi->saved_r0); + w2(pi->saved_r2); +} + +static void aten_log_adapter( PIA *pi, char * scratch, int verbose ) + +{ char *mode_string[2] = {"4-bit","8-bit"}; + + printk("%s: aten %s, ATEN EH-100 at 0x%x, ", + pi->device,ATEN_VERSION,pi->port); + printk("mode %d (%s), delay %d\n",pi->mode, + mode_string[pi->mode],pi->delay); + +} + +static struct pi_protocol aten = { + .owner = THIS_MODULE, + .name = "aten", + .max_mode = 2, + .epp_first = 2, + .default_delay = 1, + .max_units = 1, + .write_regr = aten_write_regr, + .read_regr = aten_read_regr, + .write_block = aten_write_block, + .read_block = aten_read_block, + .connect = aten_connect, + .disconnect = aten_disconnect, + .log_adapter = aten_log_adapter, +}; + +static int __init aten_init(void) +{ + return paride_register(&aten); +} + +static void __exit aten_exit(void) +{ + paride_unregister( &aten ); +} + +MODULE_LICENSE("GPL"); +module_init(aten_init) +module_exit(aten_exit) diff --git a/drivers/block/paride/bpck.c b/drivers/block/paride/bpck.c new file mode 100644 index 000000000..f5f63ca28 --- /dev/null +++ b/drivers/block/paride/bpck.c @@ -0,0 +1,476 @@ +/* + bpck.c (c) 1996-8 Grant R. Guenther <grant@torque.net> + Under the terms of the GNU General Public License. + + bpck.c is a low-level protocol driver for the MicroSolutions + "backpack" parallel port IDE adapter. + +*/ + +/* Changes: + + 1.01 GRG 1998.05.05 init_proto, release_proto, pi->delay + 1.02 GRG 1998.08.15 default pi->delay returned to 4 + +*/ + +#define BPCK_VERSION "1.02" + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/wait.h> +#include <asm/io.h> + +#include "paride.h" + +#undef r2 +#undef w2 + +#define PC pi->private +#define r2() (PC=(in_p(2) & 0xff)) +#define w2(byte) {out_p(2,byte); PC = byte;} +#define t2(pat) {PC ^= pat; out_p(2,PC);} +#define e2() {PC &= 0xfe; out_p(2,PC);} +#define o2() {PC |= 1; out_p(2,PC);} + +#define j44(l,h) (((l>>3)&0x7)|((l>>4)&0x8)|((h<<1)&0x70)|(h&0x80)) + +/* cont = 0 - access the IDE register file + cont = 1 - access the IDE command set + cont = 2 - use internal bpck register addressing +*/ + +static int cont_map[3] = { 0x40, 0x48, 0 }; + +static int bpck_read_regr( PIA *pi, int cont, int regr ) + +{ int r, l, h; + + r = regr + cont_map[cont]; + + switch (pi->mode) { + + case 0: w0(r & 0xf); w0(r); t2(2); t2(4); + l = r1(); + t2(4); + h = r1(); + return j44(l,h); + + case 1: w0(r & 0xf); w0(r); t2(2); + e2(); t2(0x20); + t2(4); h = r0(); + t2(1); t2(0x20); + return h; + + case 2: + case 3: + case 4: w0(r); w2(9); w2(0); w2(0x20); + h = r4(); + w2(0); + return h; + + } + return -1; +} + +static void bpck_write_regr( PIA *pi, int cont, int regr, int val ) + +{ int r; + + r = regr + cont_map[cont]; + + switch (pi->mode) { + + case 0: + case 1: w0(r); + t2(2); + w0(val); + o2(); t2(4); t2(1); + break; + + case 2: + case 3: + case 4: w0(r); w2(9); w2(0); + w0(val); w2(1); w2(3); w2(0); + break; + + } +} + +/* These macros access the bpck registers in native addressing */ + +#define WR(r,v) bpck_write_regr(pi,2,r,v) +#define RR(r) (bpck_read_regr(pi,2,r)) + +static void bpck_write_block( PIA *pi, char * buf, int count ) + +{ int i; + + switch (pi->mode) { + + case 0: WR(4,0x40); + w0(0x40); t2(2); t2(1); + for (i=0;i<count;i++) { w0(buf[i]); t2(4); } + WR(4,0); + break; + + case 1: WR(4,0x50); + w0(0x40); t2(2); t2(1); + for (i=0;i<count;i++) { w0(buf[i]); t2(4); } + WR(4,0x10); + break; + + case 2: WR(4,0x48); + w0(0x40); w2(9); w2(0); w2(1); + for (i=0;i<count;i++) w4(buf[i]); + w2(0); + WR(4,8); + break; + + case 3: WR(4,0x48); + w0(0x40); w2(9); w2(0); w2(1); + for (i=0;i<count/2;i++) w4w(((u16 *)buf)[i]); + w2(0); + WR(4,8); + break; + + case 4: WR(4,0x48); + w0(0x40); w2(9); w2(0); w2(1); + for (i=0;i<count/4;i++) w4l(((u32 *)buf)[i]); + w2(0); + WR(4,8); + break; + } +} + +static void bpck_read_block( PIA *pi, char * buf, int count ) + +{ int i, l, h; + + switch (pi->mode) { + + case 0: WR(4,0x40); + w0(0x40); t2(2); + for (i=0;i<count;i++) { + t2(4); l = r1(); + t2(4); h = r1(); + buf[i] = j44(l,h); + } + WR(4,0); + break; + + case 1: WR(4,0x50); + w0(0x40); t2(2); t2(0x20); + for(i=0;i<count;i++) { t2(4); buf[i] = r0(); } + t2(1); t2(0x20); + WR(4,0x10); + break; + + case 2: WR(4,0x48); + w0(0x40); w2(9); w2(0); w2(0x20); + for (i=0;i<count;i++) buf[i] = r4(); + w2(0); + WR(4,8); + break; + + case 3: WR(4,0x48); + w0(0x40); w2(9); w2(0); w2(0x20); + for (i=0;i<count/2;i++) ((u16 *)buf)[i] = r4w(); + w2(0); + WR(4,8); + break; + + case 4: WR(4,0x48); + w0(0x40); w2(9); w2(0); w2(0x20); + for (i=0;i<count/4;i++) ((u32 *)buf)[i] = r4l(); + w2(0); + WR(4,8); + break; + + } +} + +static int bpck_probe_unit ( PIA *pi ) + +{ int o1, o0, f7, id; + int t, s; + + id = pi->unit; + s = 0; + w2(4); w2(0xe); r2(); t2(2); + o1 = r1()&0xf8; + o0 = r0(); + w0(255-id); w2(4); w0(id); + t2(8); t2(8); t2(8); + t2(2); t = r1()&0xf8; + f7 = ((id % 8) == 7); + if ((f7) || (t != o1)) { t2(2); s = r1()&0xf8; } + if ((t == o1) && ((!f7) || (s == o1))) { + w2(0x4c); w0(o0); + return 0; + } + t2(8); w0(0); t2(2); w2(0x4c); w0(o0); + return 1; +} + +static void bpck_connect ( PIA *pi ) + +{ pi->saved_r0 = r0(); + w0(0xff-pi->unit); w2(4); w0(pi->unit); + t2(8); t2(8); t2(8); + t2(2); t2(2); + + switch (pi->mode) { + + case 0: t2(8); WR(4,0); + break; + + case 1: t2(8); WR(4,0x10); + break; + + case 2: + case 3: + case 4: w2(0); WR(4,8); + break; + + } + + WR(5,8); + + if (pi->devtype == PI_PCD) { + WR(0x46,0x10); /* fiddle with ESS logic ??? */ + WR(0x4c,0x38); + WR(0x4d,0x88); + WR(0x46,0xa0); + WR(0x41,0); + WR(0x4e,8); + } +} + +static void bpck_disconnect ( PIA *pi ) + +{ w0(0); + if (pi->mode >= 2) { w2(9); w2(0); } else t2(2); + w2(0x4c); w0(pi->saved_r0); +} + +static void bpck_force_spp ( PIA *pi ) + +/* This fakes the EPP protocol to turn off EPP ... */ + +{ pi->saved_r0 = r0(); + w0(0xff-pi->unit); w2(4); w0(pi->unit); + t2(8); t2(8); t2(8); + t2(2); t2(2); + + w2(0); + w0(4); w2(9); w2(0); + w0(0); w2(1); w2(3); w2(0); + w0(0); w2(9); w2(0); + w2(0x4c); w0(pi->saved_r0); +} + +#define TEST_LEN 16 + +static int bpck_test_proto( PIA *pi, char * scratch, int verbose ) + +{ int i, e, l, h, om; + char buf[TEST_LEN]; + + bpck_force_spp(pi); + + switch (pi->mode) { + + case 0: bpck_connect(pi); + WR(0x13,0x7f); + w0(0x13); t2(2); + for(i=0;i<TEST_LEN;i++) { + t2(4); l = r1(); + t2(4); h = r1(); + buf[i] = j44(l,h); + } + bpck_disconnect(pi); + break; + + case 1: bpck_connect(pi); + WR(0x13,0x7f); + w0(0x13); t2(2); t2(0x20); + for(i=0;i<TEST_LEN;i++) { t2(4); buf[i] = r0(); } + t2(1); t2(0x20); + bpck_disconnect(pi); + break; + + case 2: + case 3: + case 4: om = pi->mode; + pi->mode = 0; + bpck_connect(pi); + WR(7,3); + WR(4,8); + bpck_disconnect(pi); + + pi->mode = om; + bpck_connect(pi); + w0(0x13); w2(9); w2(1); w0(0); w2(3); w2(0); w2(0xe0); + + switch (pi->mode) { + case 2: for (i=0;i<TEST_LEN;i++) buf[i] = r4(); + break; + case 3: for (i=0;i<TEST_LEN/2;i++) ((u16 *)buf)[i] = r4w(); + break; + case 4: for (i=0;i<TEST_LEN/4;i++) ((u32 *)buf)[i] = r4l(); + break; + } + + w2(0); + WR(7,0); + bpck_disconnect(pi); + + break; + + } + + if (verbose) { + printk("%s: bpck: 0x%x unit %d mode %d: ", + pi->device,pi->port,pi->unit,pi->mode); + for (i=0;i<TEST_LEN;i++) printk("%3d",buf[i]); + printk("\n"); + } + + e = 0; + for (i=0;i<TEST_LEN;i++) if (buf[i] != (i+1)) e++; + return e; +} + +static void bpck_read_eeprom ( PIA *pi, char * buf ) + +{ int i, j, k, p, v, f, om, od; + + bpck_force_spp(pi); + + om = pi->mode; od = pi->delay; + pi->mode = 0; pi->delay = 6; + + bpck_connect(pi); + + WR(4,0); + for (i=0;i<64;i++) { + WR(6,8); + WR(6,0xc); + p = 0x100; + for (k=0;k<9;k++) { + f = (((i + 0x180) & p) != 0) * 2; + WR(6,f+0xc); + WR(6,f+0xd); + WR(6,f+0xc); + p = (p >> 1); + } + for (j=0;j<2;j++) { + v = 0; + for (k=0;k<8;k++) { + WR(6,0xc); + WR(6,0xd); + WR(6,0xc); + f = RR(0); + v = 2*v + (f == 0x84); + } + buf[2*i+1-j] = v; + } + } + WR(6,8); + WR(6,0); + WR(5,8); + + bpck_disconnect(pi); + + if (om >= 2) { + bpck_connect(pi); + WR(7,3); + WR(4,8); + bpck_disconnect(pi); + } + + pi->mode = om; pi->delay = od; +} + +static int bpck_test_port ( PIA *pi ) /* check for 8-bit port */ + +{ int i, r, m; + + w2(0x2c); i = r0(); w0(255-i); r = r0(); w0(i); + m = -1; + if (r == i) m = 2; + if (r == (255-i)) m = 0; + + w2(0xc); i = r0(); w0(255-i); r = r0(); w0(i); + if (r != (255-i)) m = -1; + + if (m == 0) { w2(6); w2(0xc); r = r0(); w0(0xaa); w0(r); w0(0xaa); } + if (m == 2) { w2(0x26); w2(0xc); } + + if (m == -1) return 0; + return 5; +} + +static void bpck_log_adapter( PIA *pi, char * scratch, int verbose ) + +{ char *mode_string[5] = { "4-bit","8-bit","EPP-8", + "EPP-16","EPP-32" }; + +#ifdef DUMP_EEPROM + int i; +#endif + + bpck_read_eeprom(pi,scratch); + +#ifdef DUMP_EEPROM + if (verbose) { + for(i=0;i<128;i++) + if ((scratch[i] < ' ') || (scratch[i] > '~')) + scratch[i] = '.'; + printk("%s: bpck EEPROM: %64.64s\n",pi->device,scratch); + printk("%s: %64.64s\n",pi->device,&scratch[64]); + } +#endif + + printk("%s: bpck %s, backpack %8.8s unit %d", + pi->device,BPCK_VERSION,&scratch[110],pi->unit); + printk(" at 0x%x, mode %d (%s), delay %d\n",pi->port, + pi->mode,mode_string[pi->mode],pi->delay); +} + +static struct pi_protocol bpck = { + .owner = THIS_MODULE, + .name = "bpck", + .max_mode = 5, + .epp_first = 2, + .default_delay = 4, + .max_units = 255, + .write_regr = bpck_write_regr, + .read_regr = bpck_read_regr, + .write_block = bpck_write_block, + .read_block = bpck_read_block, + .connect = bpck_connect, + .disconnect = bpck_disconnect, + .test_port = bpck_test_port, + .probe_unit = bpck_probe_unit, + .test_proto = bpck_test_proto, + .log_adapter = bpck_log_adapter, +}; + +static int __init bpck_init(void) +{ + return paride_register(&bpck); +} + +static void __exit bpck_exit(void) +{ + paride_unregister(&bpck); +} + +MODULE_LICENSE("GPL"); +module_init(bpck_init) +module_exit(bpck_exit) diff --git a/drivers/block/paride/bpck6.c b/drivers/block/paride/bpck6.c new file mode 100644 index 000000000..ec64e7f5d --- /dev/null +++ b/drivers/block/paride/bpck6.c @@ -0,0 +1,267 @@ +/* + backpack.c (c) 2001 Micro Solutions Inc. + Released under the terms of the GNU General Public license + + backpack.c is a low-level protocol driver for the Micro Solutions + "BACKPACK" parallel port IDE adapter + (Works on Series 6 drives) + + Written by: Ken Hahn (linux-dev@micro-solutions.com) + Clive Turvey (linux-dev@micro-solutions.com) + +*/ + +/* + This is Ken's linux wrapper for the PPC library + Version 1.0.0 is the backpack driver for which source is not available + Version 2.0.0 is the first to have source released + Version 2.0.1 is the "Cox-ified" source code + Version 2.0.2 - fixed version string usage, and made ppc functions static +*/ + + +#define BACKPACK_VERSION "2.0.2" + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/slab.h> +#include <linux/types.h> +#include <asm/io.h> +#include <linux/parport.h> + +#include "ppc6lnx.c" +#include "paride.h" + +/* PARAMETERS */ +static bool verbose; /* set this to 1 to see debugging messages and whatnot */ + + +#define PPCSTRUCT(pi) ((Interface *)(pi->private)) + +/****************************************************************/ +/* + ATAPI CDROM DRIVE REGISTERS +*/ +#define ATAPI_DATA 0 /* data port */ +#define ATAPI_ERROR 1 /* error register (read) */ +#define ATAPI_FEATURES 1 /* feature register (write) */ +#define ATAPI_INT_REASON 2 /* interrupt reason register */ +#define ATAPI_COUNT_LOW 4 /* byte count register (low) */ +#define ATAPI_COUNT_HIGH 5 /* byte count register (high) */ +#define ATAPI_DRIVE_SEL 6 /* drive select register */ +#define ATAPI_STATUS 7 /* status port (read) */ +#define ATAPI_COMMAND 7 /* command port (write) */ +#define ATAPI_ALT_STATUS 0x0e /* alternate status reg (read) */ +#define ATAPI_DEVICE_CONTROL 0x0e /* device control (write) */ +/****************************************************************/ + +static int bpck6_read_regr(PIA *pi, int cont, int reg) +{ + unsigned int out; + + /* check for bad settings */ + if (reg<0 || reg>7 || cont<0 || cont>2) + { + return(-1); + } + out=ppc6_rd_port(PPCSTRUCT(pi),cont?reg|8:reg); + return(out); +} + +static void bpck6_write_regr(PIA *pi, int cont, int reg, int val) +{ + /* check for bad settings */ + if (reg>=0 && reg<=7 && cont>=0 && cont<=1) + { + ppc6_wr_port(PPCSTRUCT(pi),cont?reg|8:reg,(u8)val); + } +} + +static void bpck6_write_block( PIA *pi, char * buf, int len ) +{ + ppc6_wr_port16_blk(PPCSTRUCT(pi),ATAPI_DATA,buf,(u32)len>>1); +} + +static void bpck6_read_block( PIA *pi, char * buf, int len ) +{ + ppc6_rd_port16_blk(PPCSTRUCT(pi),ATAPI_DATA,buf,(u32)len>>1); +} + +static void bpck6_connect ( PIA *pi ) +{ + if(verbose) + { + printk(KERN_DEBUG "connect\n"); + } + + if(pi->mode >=2) + { + PPCSTRUCT(pi)->mode=4+pi->mode-2; + } + else if(pi->mode==1) + { + PPCSTRUCT(pi)->mode=3; + } + else + { + PPCSTRUCT(pi)->mode=1; + } + + ppc6_open(PPCSTRUCT(pi)); + ppc6_wr_extout(PPCSTRUCT(pi),0x3); +} + +static void bpck6_disconnect ( PIA *pi ) +{ + if(verbose) + { + printk("disconnect\n"); + } + ppc6_wr_extout(PPCSTRUCT(pi),0x0); + ppc6_close(PPCSTRUCT(pi)); +} + +static int bpck6_test_port ( PIA *pi ) /* check for 8-bit port */ +{ + if(verbose) + { + printk(KERN_DEBUG "PARPORT indicates modes=%x for lp=0x%lx\n", + ((struct pardevice*)(pi->pardev))->port->modes, + ((struct pardevice *)(pi->pardev))->port->base); + } + + /*copy over duplicate stuff.. initialize state info*/ + PPCSTRUCT(pi)->ppc_id=pi->unit; + PPCSTRUCT(pi)->lpt_addr=pi->port; + + /* look at the parport device to see if what modes we can use */ + if(((struct pardevice *)(pi->pardev))->port->modes & + (PARPORT_MODE_EPP) + ) + { + return 5; /* Can do EPP*/ + } + else if(((struct pardevice *)(pi->pardev))->port->modes & + (PARPORT_MODE_TRISTATE) + ) + { + return 2; + } + else /*Just flat SPP*/ + { + return 1; + } +} + +static int bpck6_probe_unit ( PIA *pi ) +{ + int out; + + if(verbose) + { + printk(KERN_DEBUG "PROBE UNIT %x on port:%x\n",pi->unit,pi->port); + } + + /*SET PPC UNIT NUMBER*/ + PPCSTRUCT(pi)->ppc_id=pi->unit; + + /*LOWER DOWN TO UNIDIRECTIONAL*/ + PPCSTRUCT(pi)->mode=1; + + out=ppc6_open(PPCSTRUCT(pi)); + + if(verbose) + { + printk(KERN_DEBUG "ppc_open returned %2x\n",out); + } + + if(out) + { + ppc6_close(PPCSTRUCT(pi)); + if(verbose) + { + printk(KERN_DEBUG "leaving probe\n"); + } + return(1); + } + else + { + if(verbose) + { + printk(KERN_DEBUG "Failed open\n"); + } + return(0); + } +} + +static void bpck6_log_adapter( PIA *pi, char * scratch, int verbose ) +{ + char *mode_string[5]= + {"4-bit","8-bit","EPP-8","EPP-16","EPP-32"}; + + printk("%s: BACKPACK Protocol Driver V"BACKPACK_VERSION"\n",pi->device); + printk("%s: Copyright 2001 by Micro Solutions, Inc., DeKalb IL.\n",pi->device); + printk("%s: BACKPACK %s, Micro Solutions BACKPACK Drive at 0x%x\n", + pi->device,BACKPACK_VERSION,pi->port); + printk("%s: Unit: %d Mode:%d (%s) Delay %d\n",pi->device, + pi->unit,pi->mode,mode_string[pi->mode],pi->delay); +} + +static int bpck6_init_proto(PIA *pi) +{ + Interface *p = kzalloc(sizeof(Interface), GFP_KERNEL); + + if (p) { + pi->private = (unsigned long)p; + return 0; + } + + printk(KERN_ERR "%s: ERROR COULDN'T ALLOCATE MEMORY\n", pi->device); + return -1; +} + +static void bpck6_release_proto(PIA *pi) +{ + kfree((void *)(pi->private)); +} + +static struct pi_protocol bpck6 = { + .owner = THIS_MODULE, + .name = "bpck6", + .max_mode = 5, + .epp_first = 2, /* 2-5 use epp (need 8 ports) */ + .max_units = 255, + .write_regr = bpck6_write_regr, + .read_regr = bpck6_read_regr, + .write_block = bpck6_write_block, + .read_block = bpck6_read_block, + .connect = bpck6_connect, + .disconnect = bpck6_disconnect, + .test_port = bpck6_test_port, + .probe_unit = bpck6_probe_unit, + .log_adapter = bpck6_log_adapter, + .init_proto = bpck6_init_proto, + .release_proto = bpck6_release_proto, +}; + +static int __init bpck6_init(void) +{ + printk(KERN_INFO "bpck6: BACKPACK Protocol Driver V"BACKPACK_VERSION"\n"); + printk(KERN_INFO "bpck6: Copyright 2001 by Micro Solutions, Inc., DeKalb IL. USA\n"); + if(verbose) + printk(KERN_DEBUG "bpck6: verbose debug enabled.\n"); + return paride_register(&bpck6); +} + +static void __exit bpck6_exit(void) +{ + paride_unregister(&bpck6); +} + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Micro Solutions Inc."); +MODULE_DESCRIPTION("BACKPACK Protocol module, compatible with PARIDE"); +module_param(verbose, bool, 0644); +module_init(bpck6_init) +module_exit(bpck6_exit) diff --git a/drivers/block/paride/comm.c b/drivers/block/paride/comm.c new file mode 100644 index 000000000..9bcd35495 --- /dev/null +++ b/drivers/block/paride/comm.c @@ -0,0 +1,218 @@ +/* + comm.c (c) 1997-8 Grant R. Guenther <grant@torque.net> + Under the terms of the GNU General Public License. + + comm.c is a low-level protocol driver for some older models + of the DataStor "Commuter" parallel to IDE adapter. Some of + the parallel port devices marketed by Arista currently + use this adapter. +*/ + +/* Changes: + + 1.01 GRG 1998.05.05 init_proto, release_proto + +*/ + +#define COMM_VERSION "1.01" + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/wait.h> +#include <asm/io.h> + +#include "paride.h" + +/* mode codes: 0 nybble reads, 8-bit writes + 1 8-bit reads and writes + 2 8-bit EPP mode +*/ + +#define j44(a,b) (((a>>3)&0x0f)|((b<<1)&0xf0)) + +#define P1 w2(5);w2(0xd);w2(0xd);w2(5);w2(4); +#define P2 w2(5);w2(7);w2(7);w2(5);w2(4); + +/* cont = 0 - access the IDE register file + cont = 1 - access the IDE command set +*/ + +static int cont_map[2] = { 0x08, 0x10 }; + +static int comm_read_regr( PIA *pi, int cont, int regr ) + +{ int l, h, r; + + r = regr + cont_map[cont]; + + switch (pi->mode) { + + case 0: w0(r); P1; w0(0); + w2(6); l = r1(); w0(0x80); h = r1(); w2(4); + return j44(l,h); + + case 1: w0(r+0x20); P1; + w0(0); w2(0x26); h = r0(); w2(4); + return h; + + case 2: + case 3: + case 4: w3(r+0x20); (void)r1(); + w2(0x24); h = r4(); w2(4); + return h; + + } + return -1; +} + +static void comm_write_regr( PIA *pi, int cont, int regr, int val ) + +{ int r; + + r = regr + cont_map[cont]; + + switch (pi->mode) { + + case 0: + case 1: w0(r); P1; w0(val); P2; + break; + + case 2: + case 3: + case 4: w3(r); (void)r1(); w4(val); + break; + } +} + +static void comm_connect ( PIA *pi ) + +{ pi->saved_r0 = r0(); + pi->saved_r2 = r2(); + w2(4); w0(0xff); w2(6); + w2(4); w0(0xaa); w2(6); + w2(4); w0(0x00); w2(6); + w2(4); w0(0x87); w2(6); + w2(4); w0(0xe0); w2(0xc); w2(0xc); w2(4); +} + +static void comm_disconnect ( PIA *pi ) + +{ w2(0); w2(0); w2(0); w2(4); + w0(pi->saved_r0); + w2(pi->saved_r2); +} + +static void comm_read_block( PIA *pi, char * buf, int count ) + +{ int i, l, h; + + switch (pi->mode) { + + case 0: w0(0x48); P1; + for(i=0;i<count;i++) { + w0(0); w2(6); l = r1(); + w0(0x80); h = r1(); w2(4); + buf[i] = j44(l,h); + } + break; + + case 1: w0(0x68); P1; w0(0); + for(i=0;i<count;i++) { + w2(0x26); buf[i] = r0(); w2(0x24); + } + w2(4); + break; + + case 2: w3(0x68); (void)r1(); w2(0x24); + for (i=0;i<count;i++) buf[i] = r4(); + w2(4); + break; + + case 3: w3(0x68); (void)r1(); w2(0x24); + for (i=0;i<count/2;i++) ((u16 *)buf)[i] = r4w(); + w2(4); + break; + + case 4: w3(0x68); (void)r1(); w2(0x24); + for (i=0;i<count/4;i++) ((u32 *)buf)[i] = r4l(); + w2(4); + break; + + } +} + +/* NB: Watch out for the byte swapped writes ! */ + +static void comm_write_block( PIA *pi, char * buf, int count ) + +{ int k; + + switch (pi->mode) { + + case 0: + case 1: w0(0x68); P1; + for (k=0;k<count;k++) { + w2(5); w0(buf[k^1]); w2(7); + } + w2(5); w2(4); + break; + + case 2: w3(0x48); (void)r1(); + for (k=0;k<count;k++) w4(buf[k^1]); + break; + + case 3: w3(0x48); (void)r1(); + for (k=0;k<count/2;k++) w4w(pi_swab16(buf,k)); + break; + + case 4: w3(0x48); (void)r1(); + for (k=0;k<count/4;k++) w4l(pi_swab32(buf,k)); + break; + + + } +} + +static void comm_log_adapter( PIA *pi, char * scratch, int verbose ) + +{ char *mode_string[5] = {"4-bit","8-bit","EPP-8","EPP-16","EPP-32"}; + + printk("%s: comm %s, DataStor Commuter at 0x%x, ", + pi->device,COMM_VERSION,pi->port); + printk("mode %d (%s), delay %d\n",pi->mode, + mode_string[pi->mode],pi->delay); + +} + +static struct pi_protocol comm = { + .owner = THIS_MODULE, + .name = "comm", + .max_mode = 5, + .epp_first = 2, + .default_delay = 1, + .max_units = 1, + .write_regr = comm_write_regr, + .read_regr = comm_read_regr, + .write_block = comm_write_block, + .read_block = comm_read_block, + .connect = comm_connect, + .disconnect = comm_disconnect, + .log_adapter = comm_log_adapter, +}; + +static int __init comm_init(void) +{ + return paride_register(&comm); +} + +static void __exit comm_exit(void) +{ + paride_unregister(&comm); +} + +MODULE_LICENSE("GPL"); +module_init(comm_init) +module_exit(comm_exit) diff --git a/drivers/block/paride/dstr.c b/drivers/block/paride/dstr.c new file mode 100644 index 000000000..accc5c777 --- /dev/null +++ b/drivers/block/paride/dstr.c @@ -0,0 +1,233 @@ +/* + dstr.c (c) 1997-8 Grant R. Guenther <grant@torque.net> + Under the terms of the GNU General Public License. + + dstr.c is a low-level protocol driver for the + DataStor EP2000 parallel to IDE adapter chip. + +*/ + +/* Changes: + + 1.01 GRG 1998.05.06 init_proto, release_proto + +*/ + +#define DSTR_VERSION "1.01" + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/wait.h> +#include <asm/io.h> + +#include "paride.h" + +/* mode codes: 0 nybble reads, 8-bit writes + 1 8-bit reads and writes + 2 8-bit EPP mode + 3 EPP-16 + 4 EPP-32 +*/ + +#define j44(a,b) (((a>>3)&0x07)|((~a>>4)&0x08)|((b<<1)&0x70)|((~b)&0x80)) + +#define P1 w2(5);w2(0xd);w2(5);w2(4); +#define P2 w2(5);w2(7);w2(5);w2(4); +#define P3 w2(6);w2(4);w2(6);w2(4); + +/* cont = 0 - access the IDE register file + cont = 1 - access the IDE command set +*/ + +static int cont_map[2] = { 0x20, 0x40 }; + +static int dstr_read_regr( PIA *pi, int cont, int regr ) + +{ int a, b, r; + + r = regr + cont_map[cont]; + + w0(0x81); P1; + if (pi->mode) { w0(0x11); } else { w0(1); } + P2; w0(r); P1; + + switch (pi->mode) { + + case 0: w2(6); a = r1(); w2(4); w2(6); b = r1(); w2(4); + return j44(a,b); + + case 1: w0(0); w2(0x26); a = r0(); w2(4); + return a; + + case 2: + case 3: + case 4: w2(0x24); a = r4(); w2(4); + return a; + + } + return -1; +} + +static void dstr_write_regr( PIA *pi, int cont, int regr, int val ) + +{ int r; + + r = regr + cont_map[cont]; + + w0(0x81); P1; + if (pi->mode >= 2) { w0(0x11); } else { w0(1); } + P2; w0(r); P1; + + switch (pi->mode) { + + case 0: + case 1: w0(val); w2(5); w2(7); w2(5); w2(4); + break; + + case 2: + case 3: + case 4: w4(val); + break; + } +} + +#define CCP(x) w0(0xff);w2(0xc);w2(4);\ + w0(0xaa);w0(0x55);w0(0);w0(0xff);w0(0x87);w0(0x78);\ + w0(x);w2(5);w2(4); + +static void dstr_connect ( PIA *pi ) + +{ pi->saved_r0 = r0(); + pi->saved_r2 = r2(); + w2(4); CCP(0xe0); w0(0xff); +} + +static void dstr_disconnect ( PIA *pi ) + +{ CCP(0x30); + w0(pi->saved_r0); + w2(pi->saved_r2); +} + +static void dstr_read_block( PIA *pi, char * buf, int count ) + +{ int k, a, b; + + w0(0x81); P1; + if (pi->mode) { w0(0x19); } else { w0(9); } + P2; w0(0x82); P1; P3; w0(0x20); P1; + + switch (pi->mode) { + + case 0: for (k=0;k<count;k++) { + w2(6); a = r1(); w2(4); + w2(6); b = r1(); w2(4); + buf[k] = j44(a,b); + } + break; + + case 1: w0(0); + for (k=0;k<count;k++) { + w2(0x26); buf[k] = r0(); w2(0x24); + } + w2(4); + break; + + case 2: w2(0x24); + for (k=0;k<count;k++) buf[k] = r4(); + w2(4); + break; + + case 3: w2(0x24); + for (k=0;k<count/2;k++) ((u16 *)buf)[k] = r4w(); + w2(4); + break; + + case 4: w2(0x24); + for (k=0;k<count/4;k++) ((u32 *)buf)[k] = r4l(); + w2(4); + break; + + } +} + +static void dstr_write_block( PIA *pi, char * buf, int count ) + +{ int k; + + w0(0x81); P1; + if (pi->mode) { w0(0x19); } else { w0(9); } + P2; w0(0x82); P1; P3; w0(0x20); P1; + + switch (pi->mode) { + + case 0: + case 1: for (k=0;k<count;k++) { + w2(5); w0(buf[k]); w2(7); + } + w2(5); w2(4); + break; + + case 2: w2(0xc5); + for (k=0;k<count;k++) w4(buf[k]); + w2(0xc4); + break; + + case 3: w2(0xc5); + for (k=0;k<count/2;k++) w4w(((u16 *)buf)[k]); + w2(0xc4); + break; + + case 4: w2(0xc5); + for (k=0;k<count/4;k++) w4l(((u32 *)buf)[k]); + w2(0xc4); + break; + + } +} + + +static void dstr_log_adapter( PIA *pi, char * scratch, int verbose ) + +{ char *mode_string[5] = {"4-bit","8-bit","EPP-8", + "EPP-16","EPP-32"}; + + printk("%s: dstr %s, DataStor EP2000 at 0x%x, ", + pi->device,DSTR_VERSION,pi->port); + printk("mode %d (%s), delay %d\n",pi->mode, + mode_string[pi->mode],pi->delay); + +} + +static struct pi_protocol dstr = { + .owner = THIS_MODULE, + .name = "dstr", + .max_mode = 5, + .epp_first = 2, + .default_delay = 1, + .max_units = 1, + .write_regr = dstr_write_regr, + .read_regr = dstr_read_regr, + .write_block = dstr_write_block, + .read_block = dstr_read_block, + .connect = dstr_connect, + .disconnect = dstr_disconnect, + .log_adapter = dstr_log_adapter, +}; + +static int __init dstr_init(void) +{ + return paride_register(&dstr); +} + +static void __exit dstr_exit(void) +{ + paride_unregister(&dstr); +} + +MODULE_LICENSE("GPL"); +module_init(dstr_init) +module_exit(dstr_exit) diff --git a/drivers/block/paride/epat.c b/drivers/block/paride/epat.c new file mode 100644 index 000000000..1bcdff773 --- /dev/null +++ b/drivers/block/paride/epat.c @@ -0,0 +1,340 @@ +/* + epat.c (c) 1997-8 Grant R. Guenther <grant@torque.net> + Under the terms of the GNU General Public License. + + This is the low level protocol driver for the EPAT parallel + to IDE adapter from Shuttle Technologies. This adapter is + used in many popular parallel port disk products such as the + SyQuest EZ drives, the Avatar Shark and the Imation SuperDisk. + +*/ + +/* Changes: + + 1.01 GRG 1998.05.06 init_proto, release_proto + 1.02 Joshua b. Jore CPP(renamed), epat_connect, epat_disconnect + +*/ + +#define EPAT_VERSION "1.02" + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/wait.h> +#include <asm/io.h> + +#include "paride.h" + +#define j44(a,b) (((a>>4)&0x0f)+(b&0xf0)) +#define j53(a,b) (((a>>3)&0x1f)+((b<<4)&0xe0)) + +static int epatc8; + +module_param(epatc8, int, 0); +MODULE_PARM_DESC(epatc8, "support for the Shuttle EP1284 chip, " + "used in any recent Imation SuperDisk (LS-120) drive."); + +/* cont = 0 IDE register file + cont = 1 IDE control registers + cont = 2 internal EPAT registers +*/ + +static int cont_map[3] = { 0x18, 0x10, 0 }; + +static void epat_write_regr( PIA *pi, int cont, int regr, int val) + +{ int r; + + r = regr + cont_map[cont]; + + switch (pi->mode) { + + case 0: + case 1: + case 2: w0(0x60+r); w2(1); w0(val); w2(4); + break; + + case 3: + case 4: + case 5: w3(0x40+r); w4(val); + break; + + } +} + +static int epat_read_regr( PIA *pi, int cont, int regr ) + +{ int a, b, r; + + r = regr + cont_map[cont]; + + switch (pi->mode) { + + case 0: w0(r); w2(1); w2(3); + a = r1(); w2(4); b = r1(); + return j44(a,b); + + case 1: w0(0x40+r); w2(1); w2(4); + a = r1(); b = r2(); w0(0xff); + return j53(a,b); + + case 2: w0(0x20+r); w2(1); w2(0x25); + a = r0(); w2(4); + return a; + + case 3: + case 4: + case 5: w3(r); w2(0x24); a = r4(); w2(4); + return a; + + } + return -1; /* never gets here */ +} + +static void epat_read_block( PIA *pi, char * buf, int count ) + +{ int k, ph, a, b; + + switch (pi->mode) { + + case 0: w0(7); w2(1); w2(3); w0(0xff); + ph = 0; + for(k=0;k<count;k++) { + if (k == count-1) w0(0xfd); + w2(6+ph); a = r1(); + if (a & 8) b = a; + else { w2(4+ph); b = r1(); } + buf[k] = j44(a,b); + ph = 1 - ph; + } + w0(0); w2(4); + break; + + case 1: w0(0x47); w2(1); w2(5); w0(0xff); + ph = 0; + for(k=0;k<count;k++) { + if (k == count-1) w0(0xfd); + w2(4+ph); + a = r1(); b = r2(); + buf[k] = j53(a,b); + ph = 1 - ph; + } + w0(0); w2(4); + break; + + case 2: w0(0x27); w2(1); w2(0x25); w0(0); + ph = 0; + for(k=0;k<count-1;k++) { + w2(0x24+ph); + buf[k] = r0(); + ph = 1 - ph; + } + w2(0x26); w2(0x27); buf[count-1] = r0(); + w2(0x25); w2(4); + break; + + case 3: w3(0x80); w2(0x24); + for(k=0;k<count-1;k++) buf[k] = r4(); + w2(4); w3(0xa0); w2(0x24); buf[count-1] = r4(); + w2(4); + break; + + case 4: w3(0x80); w2(0x24); + for(k=0;k<(count/2)-1;k++) ((u16 *)buf)[k] = r4w(); + buf[count-2] = r4(); + w2(4); w3(0xa0); w2(0x24); buf[count-1] = r4(); + w2(4); + break; + + case 5: w3(0x80); w2(0x24); + for(k=0;k<(count/4)-1;k++) ((u32 *)buf)[k] = r4l(); + for(k=count-4;k<count-1;k++) buf[k] = r4(); + w2(4); w3(0xa0); w2(0x24); buf[count-1] = r4(); + w2(4); + break; + + } +} + +static void epat_write_block( PIA *pi, char * buf, int count ) + +{ int ph, k; + + switch (pi->mode) { + + case 0: + case 1: + case 2: w0(0x67); w2(1); w2(5); + ph = 0; + for(k=0;k<count;k++) { + w0(buf[k]); + w2(4+ph); + ph = 1 - ph; + } + w2(7); w2(4); + break; + + case 3: w3(0xc0); + for(k=0;k<count;k++) w4(buf[k]); + w2(4); + break; + + case 4: w3(0xc0); + for(k=0;k<(count/2);k++) w4w(((u16 *)buf)[k]); + w2(4); + break; + + case 5: w3(0xc0); + for(k=0;k<(count/4);k++) w4l(((u32 *)buf)[k]); + w2(4); + break; + + } +} + +/* these macros access the EPAT registers in native addressing */ + +#define WR(r,v) epat_write_regr(pi,2,r,v) +#define RR(r) (epat_read_regr(pi,2,r)) + +/* and these access the IDE task file */ + +#define WRi(r,v) epat_write_regr(pi,0,r,v) +#define RRi(r) (epat_read_regr(pi,0,r)) + +/* FIXME: the CPP stuff should be fixed to handle multiple EPATs on a chain */ + +#define CPP(x) w2(4);w0(0x22);w0(0xaa);w0(0x55);w0(0);w0(0xff);\ + w0(0x87);w0(0x78);w0(x);w2(4);w2(5);w2(4);w0(0xff); + +static void epat_connect ( PIA *pi ) + +{ pi->saved_r0 = r0(); + pi->saved_r2 = r2(); + + /* Initialize the chip */ + CPP(0); + + if (epatc8) { + CPP(0x40);CPP(0xe0); + w0(0);w2(1);w2(4); + WR(0x8,0x12);WR(0xc,0x14);WR(0x12,0x10); + WR(0xe,0xf);WR(0xf,4); + /* WR(0xe,0xa);WR(0xf,4); */ + WR(0xe,0xd);WR(0xf,0); + /* CPP(0x30); */ + } + + /* Connect to the chip */ + CPP(0xe0); + w0(0);w2(1);w2(4); /* Idle into SPP */ + if (pi->mode >= 3) { + w0(0);w2(1);w2(4);w2(0xc); + /* Request EPP */ + w0(0x40);w2(6);w2(7);w2(4);w2(0xc);w2(4); + } + + if (!epatc8) { + WR(8,0x10); WR(0xc,0x14); WR(0xa,0x38); WR(0x12,0x10); + } +} + +static void epat_disconnect (PIA *pi) +{ CPP(0x30); + w0(pi->saved_r0); + w2(pi->saved_r2); +} + +static int epat_test_proto( PIA *pi, char * scratch, int verbose ) + +{ int k, j, f, cc; + int e[2] = {0,0}; + + epat_connect(pi); + cc = RR(0xd); + epat_disconnect(pi); + + epat_connect(pi); + for (j=0;j<2;j++) { + WRi(6,0xa0+j*0x10); + for (k=0;k<256;k++) { + WRi(2,k^0xaa); + WRi(3,k^0x55); + if (RRi(2) != (k^0xaa)) e[j]++; + } + } + epat_disconnect(pi); + + f = 0; + epat_connect(pi); + WR(0x13,1); WR(0x13,0); WR(0xa,0x11); + epat_read_block(pi,scratch,512); + + for (k=0;k<256;k++) { + if ((scratch[2*k] & 0xff) != k) f++; + if ((scratch[2*k+1] & 0xff) != (0xff-k)) f++; + } + epat_disconnect(pi); + + if (verbose) { + printk("%s: epat: port 0x%x, mode %d, ccr %x, test=(%d,%d,%d)\n", + pi->device,pi->port,pi->mode,cc,e[0],e[1],f); + } + + return (e[0] && e[1]) || f; +} + +static void epat_log_adapter( PIA *pi, char * scratch, int verbose ) + +{ int ver; + char *mode_string[6] = + {"4-bit","5/3","8-bit","EPP-8","EPP-16","EPP-32"}; + + epat_connect(pi); + WR(0xa,0x38); /* read the version code */ + ver = RR(0xb); + epat_disconnect(pi); + + printk("%s: epat %s, Shuttle EPAT chip %x at 0x%x, ", + pi->device,EPAT_VERSION,ver,pi->port); + printk("mode %d (%s), delay %d\n",pi->mode, + mode_string[pi->mode],pi->delay); + +} + +static struct pi_protocol epat = { + .owner = THIS_MODULE, + .name = "epat", + .max_mode = 6, + .epp_first = 3, + .default_delay = 1, + .max_units = 1, + .write_regr = epat_write_regr, + .read_regr = epat_read_regr, + .write_block = epat_write_block, + .read_block = epat_read_block, + .connect = epat_connect, + .disconnect = epat_disconnect, + .test_proto = epat_test_proto, + .log_adapter = epat_log_adapter, +}; + +static int __init epat_init(void) +{ +#ifdef CONFIG_PARIDE_EPATC8 + epatc8 = 1; +#endif + return paride_register(&epat); +} + +static void __exit epat_exit(void) +{ + paride_unregister(&epat); +} + +MODULE_LICENSE("GPL"); +module_init(epat_init) +module_exit(epat_exit) diff --git a/drivers/block/paride/epia.c b/drivers/block/paride/epia.c new file mode 100644 index 000000000..fb0e782d0 --- /dev/null +++ b/drivers/block/paride/epia.c @@ -0,0 +1,316 @@ +/* + epia.c (c) 1997-8 Grant R. Guenther <grant@torque.net> + Under the terms of the GNU General Public License. + + epia.c is a low-level protocol driver for Shuttle Technologies + EPIA parallel to IDE adapter chip. This device is now obsolete + and has been replaced with the EPAT chip, which is supported + by epat.c, however, some devices based on EPIA are still + available. + +*/ + +/* Changes: + + 1.01 GRG 1998.05.06 init_proto, release_proto + 1.02 GRG 1998.06.17 support older versions of EPIA + +*/ + +#define EPIA_VERSION "1.02" + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/wait.h> +#include <asm/io.h> + +#include "paride.h" + +/* mode codes: 0 nybble reads on port 1, 8-bit writes + 1 5/3 reads on ports 1 & 2, 8-bit writes + 2 8-bit reads and writes + 3 8-bit EPP mode + 4 16-bit EPP + 5 32-bit EPP +*/ + +#define j44(a,b) (((a>>4)&0x0f)+(b&0xf0)) +#define j53(a,b) (((a>>3)&0x1f)+((b<<4)&0xe0)) + +/* cont = 0 IDE register file + cont = 1 IDE control registers +*/ + +static int cont_map[2] = { 0, 0x80 }; + +static int epia_read_regr( PIA *pi, int cont, int regr ) + +{ int a, b, r; + + regr += cont_map[cont]; + + switch (pi->mode) { + + case 0: r = regr^0x39; + w0(r); w2(1); w2(3); w0(r); + a = r1(); w2(1); b = r1(); w2(4); + return j44(a,b); + + case 1: r = regr^0x31; + w0(r); w2(1); w0(r&0x37); + w2(3); w2(5); w0(r|0xf0); + a = r1(); b = r2(); w2(4); + return j53(a,b); + + case 2: r = regr^0x29; + w0(r); w2(1); w2(0X21); w2(0x23); + a = r0(); w2(4); + return a; + + case 3: + case 4: + case 5: w3(regr); w2(0x24); a = r4(); w2(4); + return a; + + } + return -1; +} + +static void epia_write_regr( PIA *pi, int cont, int regr, int val) + +{ int r; + + regr += cont_map[cont]; + + switch (pi->mode) { + + case 0: + case 1: + case 2: r = regr^0x19; + w0(r); w2(1); w0(val); w2(3); w2(4); + break; + + case 3: + case 4: + case 5: r = regr^0x40; + w3(r); w4(val); w2(4); + break; + } +} + +#define WR(r,v) epia_write_regr(pi,0,r,v) +#define RR(r) (epia_read_regr(pi,0,r)) + +/* The use of register 0x84 is entirely unclear - it seems to control + some EPP counters ... currently we know about 3 different block + sizes: the standard 512 byte reads and writes, 12 byte writes and + 2048 byte reads (the last two being used in the CDrom drivers. +*/ + +static void epia_connect ( PIA *pi ) + +{ pi->saved_r0 = r0(); + pi->saved_r2 = r2(); + + w2(4); w0(0xa0); w0(0x50); w0(0xc0); w0(0x30); w0(0xa0); w0(0); + w2(1); w2(4); + if (pi->mode >= 3) { + w0(0xa); w2(1); w2(4); w0(0x82); w2(4); w2(0xc); w2(4); + w2(0x24); w2(0x26); w2(4); + } + WR(0x86,8); +} + +static void epia_disconnect ( PIA *pi ) + +{ /* WR(0x84,0x10); */ + w0(pi->saved_r0); + w2(1); w2(4); + w0(pi->saved_r0); + w2(pi->saved_r2); +} + +static void epia_read_block( PIA *pi, char * buf, int count ) + +{ int k, ph, a, b; + + switch (pi->mode) { + + case 0: w0(0x81); w2(1); w2(3); w0(0xc1); + ph = 1; + for (k=0;k<count;k++) { + w2(2+ph); a = r1(); + w2(4+ph); b = r1(); + buf[k] = j44(a,b); + ph = 1 - ph; + } + w0(0); w2(4); + break; + + case 1: w0(0x91); w2(1); w0(0x10); w2(3); + w0(0x51); w2(5); w0(0xd1); + ph = 1; + for (k=0;k<count;k++) { + w2(4+ph); + a = r1(); b = r2(); + buf[k] = j53(a,b); + ph = 1 - ph; + } + w0(0); w2(4); + break; + + case 2: w0(0x89); w2(1); w2(0x23); w2(0x21); + ph = 1; + for (k=0;k<count;k++) { + w2(0x24+ph); + buf[k] = r0(); + ph = 1 - ph; + } + w2(6); w2(4); + break; + + case 3: if (count > 512) WR(0x84,3); + w3(0); w2(0x24); + for (k=0;k<count;k++) buf[k] = r4(); + w2(4); WR(0x84,0); + break; + + case 4: if (count > 512) WR(0x84,3); + w3(0); w2(0x24); + for (k=0;k<count/2;k++) ((u16 *)buf)[k] = r4w(); + w2(4); WR(0x84,0); + break; + + case 5: if (count > 512) WR(0x84,3); + w3(0); w2(0x24); + for (k=0;k<count/4;k++) ((u32 *)buf)[k] = r4l(); + w2(4); WR(0x84,0); + break; + + } +} + +static void epia_write_block( PIA *pi, char * buf, int count ) + +{ int ph, k, last, d; + + switch (pi->mode) { + + case 0: + case 1: + case 2: w0(0xa1); w2(1); w2(3); w2(1); w2(5); + ph = 0; last = 0x8000; + for (k=0;k<count;k++) { + d = buf[k]; + if (d != last) { last = d; w0(d); } + w2(4+ph); + ph = 1 - ph; + } + w2(7); w2(4); + break; + + case 3: if (count < 512) WR(0x84,1); + w3(0x40); + for (k=0;k<count;k++) w4(buf[k]); + if (count < 512) WR(0x84,0); + break; + + case 4: if (count < 512) WR(0x84,1); + w3(0x40); + for (k=0;k<count/2;k++) w4w(((u16 *)buf)[k]); + if (count < 512) WR(0x84,0); + break; + + case 5: if (count < 512) WR(0x84,1); + w3(0x40); + for (k=0;k<count/4;k++) w4l(((u32 *)buf)[k]); + if (count < 512) WR(0x84,0); + break; + + } + +} + +static int epia_test_proto( PIA *pi, char * scratch, int verbose ) + +{ int j, k, f; + int e[2] = {0,0}; + + epia_connect(pi); + for (j=0;j<2;j++) { + WR(6,0xa0+j*0x10); + for (k=0;k<256;k++) { + WR(2,k^0xaa); + WR(3,k^0x55); + if (RR(2) != (k^0xaa)) e[j]++; + } + WR(2,1); WR(3,1); + } + epia_disconnect(pi); + + f = 0; + epia_connect(pi); + WR(0x84,8); + epia_read_block(pi,scratch,512); + for (k=0;k<256;k++) { + if ((scratch[2*k] & 0xff) != ((k+1) & 0xff)) f++; + if ((scratch[2*k+1] & 0xff) != ((-2-k) & 0xff)) f++; + } + WR(0x84,0); + epia_disconnect(pi); + + if (verbose) { + printk("%s: epia: port 0x%x, mode %d, test=(%d,%d,%d)\n", + pi->device,pi->port,pi->mode,e[0],e[1],f); + } + + return (e[0] && e[1]) || f; + +} + + +static void epia_log_adapter( PIA *pi, char * scratch, int verbose ) + +{ char *mode_string[6] = {"4-bit","5/3","8-bit", + "EPP-8","EPP-16","EPP-32"}; + + printk("%s: epia %s, Shuttle EPIA at 0x%x, ", + pi->device,EPIA_VERSION,pi->port); + printk("mode %d (%s), delay %d\n",pi->mode, + mode_string[pi->mode],pi->delay); + +} + +static struct pi_protocol epia = { + .owner = THIS_MODULE, + .name = "epia", + .max_mode = 6, + .epp_first = 3, + .default_delay = 1, + .max_units = 1, + .write_regr = epia_write_regr, + .read_regr = epia_read_regr, + .write_block = epia_write_block, + .read_block = epia_read_block, + .connect = epia_connect, + .disconnect = epia_disconnect, + .test_proto = epia_test_proto, + .log_adapter = epia_log_adapter, +}; + +static int __init epia_init(void) +{ + return paride_register(&epia); +} + +static void __exit epia_exit(void) +{ + paride_unregister(&epia); +} + +MODULE_LICENSE("GPL"); +module_init(epia_init) +module_exit(epia_exit) diff --git a/drivers/block/paride/fit2.c b/drivers/block/paride/fit2.c new file mode 100644 index 000000000..381283753 --- /dev/null +++ b/drivers/block/paride/fit2.c @@ -0,0 +1,151 @@ +/* + fit2.c (c) 1998 Grant R. Guenther <grant@torque.net> + Under the terms of the GNU General Public License. + + fit2.c is a low-level protocol driver for the older version + of the Fidelity International Technology parallel port adapter. + This adapter is used in their TransDisk 2000 and older TransDisk + 3000 portable hard-drives. As far as I can tell, this device + supports 4-bit mode _only_. + + Newer models of the FIT products use an enhanced protocol. + The "fit3" protocol module should support current drives. + +*/ + +#define FIT2_VERSION "1.0" + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/wait.h> +#include <asm/io.h> + +#include "paride.h" + +#define j44(a,b) (((a>>4)&0x0f)|(b&0xf0)) + +/* cont = 0 - access the IDE register file + cont = 1 - access the IDE command set + +NB: The FIT adapter does not appear to use the control registers. +So, we map ALT_STATUS to STATUS and NO-OP writes to the device +control register - this means that IDE reset will not work on these +devices. + +*/ + +static void fit2_write_regr( PIA *pi, int cont, int regr, int val) + +{ if (cont == 1) return; + w2(0xc); w0(regr); w2(4); w0(val); w2(5); w0(0); w2(4); +} + +static int fit2_read_regr( PIA *pi, int cont, int regr ) + +{ int a, b, r; + + if (cont) { + if (regr != 6) return 0xff; + r = 7; + } else r = regr + 0x10; + + w2(0xc); w0(r); w2(4); w2(5); + w0(0); a = r1(); + w0(1); b = r1(); + w2(4); + + return j44(a,b); + +} + +static void fit2_read_block( PIA *pi, char * buf, int count ) + +{ int k, a, b, c, d; + + w2(0xc); w0(0x10); + + for (k=0;k<count/4;k++) { + + w2(4); w2(5); + w0(0); a = r1(); w0(1); b = r1(); + w0(3); c = r1(); w0(2); d = r1(); + buf[4*k+0] = j44(a,b); + buf[4*k+1] = j44(d,c); + + w2(4); w2(5); + a = r1(); w0(3); b = r1(); + w0(1); c = r1(); w0(0); d = r1(); + buf[4*k+2] = j44(d,c); + buf[4*k+3] = j44(a,b); + + } + + w2(4); + +} + +static void fit2_write_block( PIA *pi, char * buf, int count ) + +{ int k; + + + w2(0xc); w0(0); + for (k=0;k<count/2;k++) { + w2(4); w0(buf[2*k]); + w2(5); w0(buf[2*k+1]); + } + w2(4); +} + +static void fit2_connect ( PIA *pi ) + +{ pi->saved_r0 = r0(); + pi->saved_r2 = r2(); + w2(0xcc); +} + +static void fit2_disconnect ( PIA *pi ) + +{ w0(pi->saved_r0); + w2(pi->saved_r2); +} + +static void fit2_log_adapter( PIA *pi, char * scratch, int verbose ) + +{ printk("%s: fit2 %s, FIT 2000 adapter at 0x%x, delay %d\n", + pi->device,FIT2_VERSION,pi->port,pi->delay); + +} + +static struct pi_protocol fit2 = { + .owner = THIS_MODULE, + .name = "fit2", + .max_mode = 1, + .epp_first = 2, + .default_delay = 1, + .max_units = 1, + .write_regr = fit2_write_regr, + .read_regr = fit2_read_regr, + .write_block = fit2_write_block, + .read_block = fit2_read_block, + .connect = fit2_connect, + .disconnect = fit2_disconnect, + .log_adapter = fit2_log_adapter, +}; + +static int __init fit2_init(void) +{ + return paride_register(&fit2); +} + +static void __exit fit2_exit(void) +{ + paride_unregister(&fit2); +} + +MODULE_LICENSE("GPL"); +module_init(fit2_init) +module_exit(fit2_exit) diff --git a/drivers/block/paride/fit3.c b/drivers/block/paride/fit3.c new file mode 100644 index 000000000..275d26945 --- /dev/null +++ b/drivers/block/paride/fit3.c @@ -0,0 +1,211 @@ +/* + fit3.c (c) 1998 Grant R. Guenther <grant@torque.net> + Under the terms of the GNU General Public License. + + fit3.c is a low-level protocol driver for newer models + of the Fidelity International Technology parallel port adapter. + This adapter is used in their TransDisk 3000 portable + hard-drives, as well as CD-ROM, PD-CD and other devices. + + The TD-2000 and certain older devices use a different protocol. + Try the fit2 protocol module with them. + + NB: The FIT adapters do not appear to support the control + registers. So, we map ALT_STATUS to STATUS and NO-OP writes + to the device control register - this means that IDE reset + will not work on these devices. + +*/ + +#define FIT3_VERSION "1.0" + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/wait.h> +#include <asm/io.h> + +#include "paride.h" + +#define j44(a,b) (((a>>3)&0x0f)|((b<<1)&0xf0)) + +#define w7(byte) {out_p(7,byte);} +#define r7() (in_p(7) & 0xff) + +/* cont = 0 - access the IDE register file + cont = 1 - access the IDE command set + +*/ + +static void fit3_write_regr( PIA *pi, int cont, int regr, int val) + +{ if (cont == 1) return; + + switch (pi->mode) { + + case 0: + case 1: w2(0xc); w0(regr); w2(0x8); w2(0xc); + w0(val); w2(0xd); + w0(0); w2(0xc); + break; + + case 2: w2(0xc); w0(regr); w2(0x8); w2(0xc); + w4(val); w4(0); + w2(0xc); + break; + + } +} + +static int fit3_read_regr( PIA *pi, int cont, int regr ) + +{ int a, b; + + if (cont) { + if (regr != 6) return 0xff; + regr = 7; + } + + switch (pi->mode) { + + case 0: w2(0xc); w0(regr + 0x10); w2(0x8); w2(0xc); + w2(0xd); a = r1(); + w2(0xf); b = r1(); + w2(0xc); + return j44(a,b); + + case 1: w2(0xc); w0(regr + 0x90); w2(0x8); w2(0xc); + w2(0xec); w2(0xee); w2(0xef); a = r0(); + w2(0xc); + return a; + + case 2: w2(0xc); w0(regr + 0x90); w2(0x8); w2(0xc); + w2(0xec); + a = r4(); b = r4(); + w2(0xc); + return a; + + } + return -1; + +} + +static void fit3_read_block( PIA *pi, char * buf, int count ) + +{ int k, a, b, c, d; + + switch (pi->mode) { + + case 0: w2(0xc); w0(0x10); w2(0x8); w2(0xc); + for (k=0;k<count/2;k++) { + w2(0xd); a = r1(); + w2(0xf); b = r1(); + w2(0xc); c = r1(); + w2(0xe); d = r1(); + buf[2*k ] = j44(a,b); + buf[2*k+1] = j44(c,d); + } + w2(0xc); + break; + + case 1: w2(0xc); w0(0x90); w2(0x8); w2(0xc); + w2(0xec); w2(0xee); + for (k=0;k<count/2;k++) { + w2(0xef); a = r0(); + w2(0xee); b = r0(); + buf[2*k ] = a; + buf[2*k+1] = b; + } + w2(0xec); + w2(0xc); + break; + + case 2: w2(0xc); w0(0x90); w2(0x8); w2(0xc); + w2(0xec); + for (k=0;k<count;k++) buf[k] = r4(); + w2(0xc); + break; + + } +} + +static void fit3_write_block( PIA *pi, char * buf, int count ) + +{ int k; + + switch (pi->mode) { + + case 0: + case 1: w2(0xc); w0(0); w2(0x8); w2(0xc); + for (k=0;k<count/2;k++) { + w0(buf[2*k ]); w2(0xd); + w0(buf[2*k+1]); w2(0xc); + } + break; + + case 2: w2(0xc); w0(0); w2(0x8); w2(0xc); + for (k=0;k<count;k++) w4(buf[k]); + w2(0xc); + break; + } +} + +static void fit3_connect ( PIA *pi ) + +{ pi->saved_r0 = r0(); + pi->saved_r2 = r2(); + w2(0xc); w0(0); w2(0xa); + if (pi->mode == 2) { + w2(0xc); w0(0x9); w2(0x8); w2(0xc); + } +} + +static void fit3_disconnect ( PIA *pi ) + +{ w2(0xc); w0(0xa); w2(0x8); w2(0xc); + w0(pi->saved_r0); + w2(pi->saved_r2); +} + +static void fit3_log_adapter( PIA *pi, char * scratch, int verbose ) + +{ char *mode_string[3] = {"4-bit","8-bit","EPP"}; + + printk("%s: fit3 %s, FIT 3000 adapter at 0x%x, " + "mode %d (%s), delay %d\n", + pi->device,FIT3_VERSION,pi->port, + pi->mode,mode_string[pi->mode],pi->delay); + +} + +static struct pi_protocol fit3 = { + .owner = THIS_MODULE, + .name = "fit3", + .max_mode = 3, + .epp_first = 2, + .default_delay = 1, + .max_units = 1, + .write_regr = fit3_write_regr, + .read_regr = fit3_read_regr, + .write_block = fit3_write_block, + .read_block = fit3_read_block, + .connect = fit3_connect, + .disconnect = fit3_disconnect, + .log_adapter = fit3_log_adapter, +}; + +static int __init fit3_init(void) +{ + return paride_register(&fit3); +} + +static void __exit fit3_exit(void) +{ + paride_unregister(&fit3); +} + +MODULE_LICENSE("GPL"); +module_init(fit3_init) +module_exit(fit3_exit) diff --git a/drivers/block/paride/friq.c b/drivers/block/paride/friq.c new file mode 100644 index 000000000..4f2ba2446 --- /dev/null +++ b/drivers/block/paride/friq.c @@ -0,0 +1,276 @@ +/* + friq.c (c) 1998 Grant R. Guenther <grant@torque.net> + Under the terms of the GNU General Public License + + friq.c is a low-level protocol driver for the Freecom "IQ" + parallel port IDE adapter. Early versions of this adapter + use the 'frpw' protocol. + + Freecom uses this adapter in a battery powered external + CD-ROM drive. It is also used in LS-120 drives by + Maxell and Panasonic, and other devices. + + The battery powered drive requires software support to + control the power to the drive. This module enables the + drive power when the high level driver (pcd) is loaded + and disables it when the module is unloaded. Note, if + the friq module is built in to the kernel, the power + will never be switched off, so other means should be + used to conserve battery power. + +*/ + +/* Changes: + + 1.01 GRG 1998.12.20 Added support for soft power switch +*/ + +#define FRIQ_VERSION "1.01" + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/wait.h> +#include <asm/io.h> + +#include "paride.h" + +#define CMD(x) w2(4);w0(0xff);w0(0xff);w0(0x73);w0(0x73);\ + w0(0xc9);w0(0xc9);w0(0x26);w0(0x26);w0(x);w0(x); + +#define j44(l,h) (((l>>4)&0x0f)|(h&0xf0)) + +/* cont = 0 - access the IDE register file + cont = 1 - access the IDE command set +*/ + +static int cont_map[2] = { 0x08, 0x10 }; + +static int friq_read_regr( PIA *pi, int cont, int regr ) + +{ int h,l,r; + + r = regr + cont_map[cont]; + + CMD(r); + w2(6); l = r1(); + w2(4); h = r1(); + w2(4); + + return j44(l,h); + +} + +static void friq_write_regr( PIA *pi, int cont, int regr, int val) + +{ int r; + + r = regr + cont_map[cont]; + + CMD(r); + w0(val); + w2(5);w2(7);w2(5);w2(4); +} + +static void friq_read_block_int( PIA *pi, char * buf, int count, int regr ) + +{ int h, l, k, ph; + + switch(pi->mode) { + + case 0: CMD(regr); + for (k=0;k<count;k++) { + w2(6); l = r1(); + w2(4); h = r1(); + buf[k] = j44(l,h); + } + w2(4); + break; + + case 1: ph = 2; + CMD(regr+0xc0); + w0(0xff); + for (k=0;k<count;k++) { + w2(0xa4 + ph); + buf[k] = r0(); + ph = 2 - ph; + } + w2(0xac); w2(0xa4); w2(4); + break; + + case 2: CMD(regr+0x80); + for (k=0;k<count-2;k++) buf[k] = r4(); + w2(0xac); w2(0xa4); + buf[count-2] = r4(); + buf[count-1] = r4(); + w2(4); + break; + + case 3: CMD(regr+0x80); + for (k=0;k<(count/2)-1;k++) ((u16 *)buf)[k] = r4w(); + w2(0xac); w2(0xa4); + buf[count-2] = r4(); + buf[count-1] = r4(); + w2(4); + break; + + case 4: CMD(regr+0x80); + for (k=0;k<(count/4)-1;k++) ((u32 *)buf)[k] = r4l(); + buf[count-4] = r4(); + buf[count-3] = r4(); + w2(0xac); w2(0xa4); + buf[count-2] = r4(); + buf[count-1] = r4(); + w2(4); + break; + + } +} + +static void friq_read_block( PIA *pi, char * buf, int count) + +{ friq_read_block_int(pi,buf,count,0x08); +} + +static void friq_write_block( PIA *pi, char * buf, int count ) + +{ int k; + + switch(pi->mode) { + + case 0: + case 1: CMD(8); w2(5); + for (k=0;k<count;k++) { + w0(buf[k]); + w2(7);w2(5); + } + w2(4); + break; + + case 2: CMD(0xc8); w2(5); + for (k=0;k<count;k++) w4(buf[k]); + w2(4); + break; + + case 3: CMD(0xc8); w2(5); + for (k=0;k<count/2;k++) w4w(((u16 *)buf)[k]); + w2(4); + break; + + case 4: CMD(0xc8); w2(5); + for (k=0;k<count/4;k++) w4l(((u32 *)buf)[k]); + w2(4); + break; + } +} + +static void friq_connect ( PIA *pi ) + +{ pi->saved_r0 = r0(); + pi->saved_r2 = r2(); + w2(4); +} + +static void friq_disconnect ( PIA *pi ) + +{ CMD(0x20); + w0(pi->saved_r0); + w2(pi->saved_r2); +} + +static int friq_test_proto( PIA *pi, char * scratch, int verbose ) + +{ int j, k, r; + int e[2] = {0,0}; + + pi->saved_r0 = r0(); + w0(0xff); udelay(20); CMD(0x3d); /* turn the power on */ + udelay(500); + w0(pi->saved_r0); + + friq_connect(pi); + for (j=0;j<2;j++) { + friq_write_regr(pi,0,6,0xa0+j*0x10); + for (k=0;k<256;k++) { + friq_write_regr(pi,0,2,k^0xaa); + friq_write_regr(pi,0,3,k^0x55); + if (friq_read_regr(pi,0,2) != (k^0xaa)) e[j]++; + } + } + friq_disconnect(pi); + + friq_connect(pi); + friq_read_block_int(pi,scratch,512,0x10); + r = 0; + for (k=0;k<128;k++) if (scratch[k] != k) r++; + friq_disconnect(pi); + + if (verbose) { + printk("%s: friq: port 0x%x, mode %d, test=(%d,%d,%d)\n", + pi->device,pi->port,pi->mode,e[0],e[1],r); + } + + return (r || (e[0] && e[1])); +} + + +static void friq_log_adapter( PIA *pi, char * scratch, int verbose ) + +{ char *mode_string[6] = {"4-bit","8-bit", + "EPP-8","EPP-16","EPP-32"}; + + printk("%s: friq %s, Freecom IQ ASIC-2 adapter at 0x%x, ", pi->device, + FRIQ_VERSION,pi->port); + printk("mode %d (%s), delay %d\n",pi->mode, + mode_string[pi->mode],pi->delay); + + pi->private = 1; + friq_connect(pi); + CMD(0x9e); /* disable sleep timer */ + friq_disconnect(pi); + +} + +static void friq_release_proto( PIA *pi) +{ + if (pi->private) { /* turn off the power */ + friq_connect(pi); + CMD(0x1d); CMD(0x1e); + friq_disconnect(pi); + pi->private = 0; + } +} + +static struct pi_protocol friq = { + .owner = THIS_MODULE, + .name = "friq", + .max_mode = 5, + .epp_first = 2, + .default_delay = 1, + .max_units = 1, + .write_regr = friq_write_regr, + .read_regr = friq_read_regr, + .write_block = friq_write_block, + .read_block = friq_read_block, + .connect = friq_connect, + .disconnect = friq_disconnect, + .test_proto = friq_test_proto, + .log_adapter = friq_log_adapter, + .release_proto = friq_release_proto, +}; + +static int __init friq_init(void) +{ + return paride_register(&friq); +} + +static void __exit friq_exit(void) +{ + paride_unregister(&friq); +} + +MODULE_LICENSE("GPL"); +module_init(friq_init) +module_exit(friq_exit) diff --git a/drivers/block/paride/frpw.c b/drivers/block/paride/frpw.c new file mode 100644 index 000000000..c3cde3646 --- /dev/null +++ b/drivers/block/paride/frpw.c @@ -0,0 +1,313 @@ +/* + frpw.c (c) 1996-8 Grant R. Guenther <grant@torque.net> + Under the terms of the GNU General Public License + + frpw.c is a low-level protocol driver for the Freecom "Power" + parallel port IDE adapter. + + Some applications of this adapter may require a "printer" reset + prior to loading the driver. This can be done by loading and + unloading the "lp" driver, or it can be done by this driver + if you define FRPW_HARD_RESET. The latter is not recommended + as it may upset devices on other ports. + +*/ + +/* Changes: + + 1.01 GRG 1998.05.06 init_proto, release_proto + fix chip detect + added EPP-16 and EPP-32 + 1.02 GRG 1998.09.23 added hard reset to initialisation process + 1.03 GRG 1998.12.14 made hard reset conditional + +*/ + +#define FRPW_VERSION "1.03" + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/wait.h> +#include <asm/io.h> + +#include "paride.h" + +#define cec4 w2(0xc);w2(0xe);w2(0xe);w2(0xc);w2(4);w2(4);w2(4); +#define j44(l,h) (((l>>4)&0x0f)|(h&0xf0)) + +/* cont = 0 - access the IDE register file + cont = 1 - access the IDE command set +*/ + +static int cont_map[2] = { 0x08, 0x10 }; + +static int frpw_read_regr( PIA *pi, int cont, int regr ) + +{ int h,l,r; + + r = regr + cont_map[cont]; + + w2(4); + w0(r); cec4; + w2(6); l = r1(); + w2(4); h = r1(); + w2(4); + + return j44(l,h); + +} + +static void frpw_write_regr( PIA *pi, int cont, int regr, int val) + +{ int r; + + r = regr + cont_map[cont]; + + w2(4); w0(r); cec4; + w0(val); + w2(5);w2(7);w2(5);w2(4); +} + +static void frpw_read_block_int( PIA *pi, char * buf, int count, int regr ) + +{ int h, l, k, ph; + + switch(pi->mode) { + + case 0: w2(4); w0(regr); cec4; + for (k=0;k<count;k++) { + w2(6); l = r1(); + w2(4); h = r1(); + buf[k] = j44(l,h); + } + w2(4); + break; + + case 1: ph = 2; + w2(4); w0(regr + 0xc0); cec4; + w0(0xff); + for (k=0;k<count;k++) { + w2(0xa4 + ph); + buf[k] = r0(); + ph = 2 - ph; + } + w2(0xac); w2(0xa4); w2(4); + break; + + case 2: w2(4); w0(regr + 0x80); cec4; + for (k=0;k<count;k++) buf[k] = r4(); + w2(0xac); w2(0xa4); + w2(4); + break; + + case 3: w2(4); w0(regr + 0x80); cec4; + for (k=0;k<count-2;k++) buf[k] = r4(); + w2(0xac); w2(0xa4); + buf[count-2] = r4(); + buf[count-1] = r4(); + w2(4); + break; + + case 4: w2(4); w0(regr + 0x80); cec4; + for (k=0;k<(count/2)-1;k++) ((u16 *)buf)[k] = r4w(); + w2(0xac); w2(0xa4); + buf[count-2] = r4(); + buf[count-1] = r4(); + w2(4); + break; + + case 5: w2(4); w0(regr + 0x80); cec4; + for (k=0;k<(count/4)-1;k++) ((u32 *)buf)[k] = r4l(); + buf[count-4] = r4(); + buf[count-3] = r4(); + w2(0xac); w2(0xa4); + buf[count-2] = r4(); + buf[count-1] = r4(); + w2(4); + break; + + } +} + +static void frpw_read_block( PIA *pi, char * buf, int count) + +{ frpw_read_block_int(pi,buf,count,0x08); +} + +static void frpw_write_block( PIA *pi, char * buf, int count ) + +{ int k; + + switch(pi->mode) { + + case 0: + case 1: + case 2: w2(4); w0(8); cec4; w2(5); + for (k=0;k<count;k++) { + w0(buf[k]); + w2(7);w2(5); + } + w2(4); + break; + + case 3: w2(4); w0(0xc8); cec4; w2(5); + for (k=0;k<count;k++) w4(buf[k]); + w2(4); + break; + + case 4: w2(4); w0(0xc8); cec4; w2(5); + for (k=0;k<count/2;k++) w4w(((u16 *)buf)[k]); + w2(4); + break; + + case 5: w2(4); w0(0xc8); cec4; w2(5); + for (k=0;k<count/4;k++) w4l(((u32 *)buf)[k]); + w2(4); + break; + } +} + +static void frpw_connect ( PIA *pi ) + +{ pi->saved_r0 = r0(); + pi->saved_r2 = r2(); + w2(4); +} + +static void frpw_disconnect ( PIA *pi ) + +{ w2(4); w0(0x20); cec4; + w0(pi->saved_r0); + w2(pi->saved_r2); +} + +/* Stub logic to see if PNP string is available - used to distinguish + between the Xilinx and ASIC implementations of the Freecom adapter. +*/ + +static int frpw_test_pnp ( PIA *pi ) + +/* returns chip_type: 0 = Xilinx, 1 = ASIC */ + +{ int olddelay, a, b; + +#ifdef FRPW_HARD_RESET + w0(0); w2(8); udelay(50); w2(0xc); /* parallel bus reset */ + mdelay(1500); +#endif + + olddelay = pi->delay; + pi->delay = 10; + + pi->saved_r0 = r0(); + pi->saved_r2 = r2(); + + w2(4); w0(4); w2(6); w2(7); + a = r1() & 0xff; w2(4); b = r1() & 0xff; + w2(0xc); w2(0xe); w2(4); + + pi->delay = olddelay; + w0(pi->saved_r0); + w2(pi->saved_r2); + + return ((~a&0x40) && (b&0x40)); +} + +/* We use the pi->private to remember the result of the PNP test. + To make this work, private = port*2 + chip. Yes, I know it's + a hack :-( +*/ + +static int frpw_test_proto( PIA *pi, char * scratch, int verbose ) + +{ int j, k, r; + int e[2] = {0,0}; + + if ((pi->private>>1) != pi->port) + pi->private = frpw_test_pnp(pi) + 2*pi->port; + + if (((pi->private%2) == 0) && (pi->mode > 2)) { + if (verbose) + printk("%s: frpw: Xilinx does not support mode %d\n", + pi->device, pi->mode); + return 1; + } + + if (((pi->private%2) == 1) && (pi->mode == 2)) { + if (verbose) + printk("%s: frpw: ASIC does not support mode 2\n", + pi->device); + return 1; + } + + frpw_connect(pi); + for (j=0;j<2;j++) { + frpw_write_regr(pi,0,6,0xa0+j*0x10); + for (k=0;k<256;k++) { + frpw_write_regr(pi,0,2,k^0xaa); + frpw_write_regr(pi,0,3,k^0x55); + if (frpw_read_regr(pi,0,2) != (k^0xaa)) e[j]++; + } + } + frpw_disconnect(pi); + + frpw_connect(pi); + frpw_read_block_int(pi,scratch,512,0x10); + r = 0; + for (k=0;k<128;k++) if (scratch[k] != k) r++; + frpw_disconnect(pi); + + if (verbose) { + printk("%s: frpw: port 0x%x, chip %ld, mode %d, test=(%d,%d,%d)\n", + pi->device,pi->port,(pi->private%2),pi->mode,e[0],e[1],r); + } + + return (r || (e[0] && e[1])); +} + + +static void frpw_log_adapter( PIA *pi, char * scratch, int verbose ) + +{ char *mode_string[6] = {"4-bit","8-bit","EPP", + "EPP-8","EPP-16","EPP-32"}; + + printk("%s: frpw %s, Freecom (%s) adapter at 0x%x, ", pi->device, + FRPW_VERSION,((pi->private%2) == 0)?"Xilinx":"ASIC",pi->port); + printk("mode %d (%s), delay %d\n",pi->mode, + mode_string[pi->mode],pi->delay); + +} + +static struct pi_protocol frpw = { + .owner = THIS_MODULE, + .name = "frpw", + .max_mode = 6, + .epp_first = 2, + .default_delay = 2, + .max_units = 1, + .write_regr = frpw_write_regr, + .read_regr = frpw_read_regr, + .write_block = frpw_write_block, + .read_block = frpw_read_block, + .connect = frpw_connect, + .disconnect = frpw_disconnect, + .test_proto = frpw_test_proto, + .log_adapter = frpw_log_adapter, +}; + +static int __init frpw_init(void) +{ + return paride_register(&frpw); +} + +static void __exit frpw_exit(void) +{ + paride_unregister(&frpw); +} + +MODULE_LICENSE("GPL"); +module_init(frpw_init) +module_exit(frpw_exit) diff --git a/drivers/block/paride/kbic.c b/drivers/block/paride/kbic.c new file mode 100644 index 000000000..35999c415 --- /dev/null +++ b/drivers/block/paride/kbic.c @@ -0,0 +1,305 @@ +/* + kbic.c (c) 1997-8 Grant R. Guenther <grant@torque.net> + Under the terms of the GNU General Public License. + + This is a low-level driver for the KBIC-951A and KBIC-971A + parallel to IDE adapter chips from KingByte Information Systems. + + The chips are almost identical, however, the wakeup code + required for the 971A interferes with the correct operation of + the 951A, so this driver registers itself twice, once for + each chip. + +*/ + +/* Changes: + + 1.01 GRG 1998.05.06 init_proto, release_proto + +*/ + +#define KBIC_VERSION "1.01" + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/wait.h> +#include <asm/io.h> + +#include "paride.h" + +#define r12w() (delay_p,inw(pi->port+1)&0xffff) + +#define j44(a,b) ((((a>>4)&0x0f)|(b&0xf0))^0x88) +#define j53(w) (((w>>3)&0x1f)|((w>>4)&0xe0)) + + +/* cont = 0 - access the IDE register file + cont = 1 - access the IDE command set +*/ + +static int cont_map[2] = { 0x80, 0x40 }; + +static int kbic_read_regr( PIA *pi, int cont, int regr ) + +{ int a, b, s; + + s = cont_map[cont]; + + switch (pi->mode) { + + case 0: w0(regr|0x18|s); w2(4); w2(6); w2(4); w2(1); w0(8); + a = r1(); w0(0x28); b = r1(); w2(4); + return j44(a,b); + + case 1: w0(regr|0x38|s); w2(4); w2(6); w2(4); w2(5); w0(8); + a = r12w(); w2(4); + return j53(a); + + case 2: w0(regr|0x08|s); w2(4); w2(6); w2(4); w2(0xa5); w2(0xa1); + a = r0(); w2(4); + return a; + + case 3: + case 4: + case 5: w0(0x20|s); w2(4); w2(6); w2(4); w3(regr); + a = r4(); b = r4(); w2(4); w2(0); w2(4); + return a; + + } + return -1; +} + +static void kbic_write_regr( PIA *pi, int cont, int regr, int val) + +{ int s; + + s = cont_map[cont]; + + switch (pi->mode) { + + case 0: + case 1: + case 2: w0(regr|0x10|s); w2(4); w2(6); w2(4); + w0(val); w2(5); w2(4); + break; + + case 3: + case 4: + case 5: w0(0x20|s); w2(4); w2(6); w2(4); w3(regr); + w4(val); w4(val); + w2(4); w2(0); w2(4); + break; + + } +} + +static void k951_connect ( PIA *pi ) + +{ pi->saved_r0 = r0(); + pi->saved_r2 = r2(); + w2(4); +} + +static void k951_disconnect ( PIA *pi ) + +{ w0(pi->saved_r0); + w2(pi->saved_r2); +} + +#define CCP(x) w2(0xc4);w0(0xaa);w0(0x55);w0(0);w0(0xff);w0(0x87);\ + w0(0x78);w0(x);w2(0xc5);w2(0xc4);w0(0xff); + +static void k971_connect ( PIA *pi ) + +{ pi->saved_r0 = r0(); + pi->saved_r2 = r2(); + CCP(0x20); + w2(4); +} + +static void k971_disconnect ( PIA *pi ) + +{ CCP(0x30); + w0(pi->saved_r0); + w2(pi->saved_r2); +} + +/* counts must be congruent to 0 MOD 4, but all known applications + have this property. +*/ + +static void kbic_read_block( PIA *pi, char * buf, int count ) + +{ int k, a, b; + + switch (pi->mode) { + + case 0: w0(0x98); w2(4); w2(6); w2(4); + for (k=0;k<count/2;k++) { + w2(1); w0(8); a = r1(); + w0(0x28); b = r1(); + buf[2*k] = j44(a,b); + w2(5); b = r1(); + w0(8); a = r1(); + buf[2*k+1] = j44(a,b); + w2(4); + } + break; + + case 1: w0(0xb8); w2(4); w2(6); w2(4); + for (k=0;k<count/4;k++) { + w0(0xb8); + w2(4); w2(5); + w0(8); buf[4*k] = j53(r12w()); + w0(0xb8); buf[4*k+1] = j53(r12w()); + w2(4); w2(5); + buf[4*k+3] = j53(r12w()); + w0(8); buf[4*k+2] = j53(r12w()); + } + w2(4); + break; + + case 2: w0(0x88); w2(4); w2(6); w2(4); + for (k=0;k<count/2;k++) { + w2(0xa0); w2(0xa1); buf[2*k] = r0(); + w2(0xa5); buf[2*k+1] = r0(); + } + w2(4); + break; + + case 3: w0(0xa0); w2(4); w2(6); w2(4); w3(0); + for (k=0;k<count;k++) buf[k] = r4(); + w2(4); w2(0); w2(4); + break; + + case 4: w0(0xa0); w2(4); w2(6); w2(4); w3(0); + for (k=0;k<count/2;k++) ((u16 *)buf)[k] = r4w(); + w2(4); w2(0); w2(4); + break; + + case 5: w0(0xa0); w2(4); w2(6); w2(4); w3(0); + for (k=0;k<count/4;k++) ((u32 *)buf)[k] = r4l(); + w2(4); w2(0); w2(4); + break; + + + } +} + +static void kbic_write_block( PIA *pi, char * buf, int count ) + +{ int k; + + switch (pi->mode) { + + case 0: + case 1: + case 2: w0(0x90); w2(4); w2(6); w2(4); + for(k=0;k<count/2;k++) { + w0(buf[2*k+1]); w2(0); w2(4); + w0(buf[2*k]); w2(5); w2(4); + } + break; + + case 3: w0(0xa0); w2(4); w2(6); w2(4); w3(0); + for(k=0;k<count/2;k++) { + w4(buf[2*k+1]); + w4(buf[2*k]); + } + w2(4); w2(0); w2(4); + break; + + case 4: w0(0xa0); w2(4); w2(6); w2(4); w3(0); + for(k=0;k<count/2;k++) w4w(pi_swab16(buf,k)); + w2(4); w2(0); w2(4); + break; + + case 5: w0(0xa0); w2(4); w2(6); w2(4); w3(0); + for(k=0;k<count/4;k++) w4l(pi_swab32(buf,k)); + w2(4); w2(0); w2(4); + break; + + } + +} + +static void kbic_log_adapter( PIA *pi, char * scratch, + int verbose, char * chip ) + +{ char *mode_string[6] = {"4-bit","5/3","8-bit", + "EPP-8","EPP_16","EPP-32"}; + + printk("%s: kbic %s, KingByte %s at 0x%x, ", + pi->device,KBIC_VERSION,chip,pi->port); + printk("mode %d (%s), delay %d\n",pi->mode, + mode_string[pi->mode],pi->delay); + +} + +static void k951_log_adapter( PIA *pi, char * scratch, int verbose ) + +{ kbic_log_adapter(pi,scratch,verbose,"KBIC-951A"); +} + +static void k971_log_adapter( PIA *pi, char * scratch, int verbose ) + +{ kbic_log_adapter(pi,scratch,verbose,"KBIC-971A"); +} + +static struct pi_protocol k951 = { + .owner = THIS_MODULE, + .name = "k951", + .max_mode = 6, + .epp_first = 3, + .default_delay = 1, + .max_units = 1, + .write_regr = kbic_write_regr, + .read_regr = kbic_read_regr, + .write_block = kbic_write_block, + .read_block = kbic_read_block, + .connect = k951_connect, + .disconnect = k951_disconnect, + .log_adapter = k951_log_adapter, +}; + +static struct pi_protocol k971 = { + .owner = THIS_MODULE, + .name = "k971", + .max_mode = 6, + .epp_first = 3, + .default_delay = 1, + .max_units = 1, + .write_regr = kbic_write_regr, + .read_regr = kbic_read_regr, + .write_block = kbic_write_block, + .read_block = kbic_read_block, + .connect = k971_connect, + .disconnect = k971_disconnect, + .log_adapter = k971_log_adapter, +}; + +static int __init kbic_init(void) +{ + int rv; + + rv = paride_register(&k951); + if (rv < 0) + return rv; + rv = paride_register(&k971); + if (rv < 0) + paride_unregister(&k951); + return rv; +} + +static void __exit kbic_exit(void) +{ + paride_unregister(&k951); + paride_unregister(&k971); +} + +MODULE_LICENSE("GPL"); +module_init(kbic_init) +module_exit(kbic_exit) diff --git a/drivers/block/paride/ktti.c b/drivers/block/paride/ktti.c new file mode 100644 index 000000000..117ab0e8c --- /dev/null +++ b/drivers/block/paride/ktti.c @@ -0,0 +1,128 @@ +/* + ktti.c (c) 1998 Grant R. Guenther <grant@torque.net> + Under the terms of the GNU General Public License. + + ktti.c is a low-level protocol driver for the KT Technology + parallel port adapter. This adapter is used in the "PHd" + portable hard-drives. As far as I can tell, this device + supports 4-bit mode _only_. + +*/ + +#define KTTI_VERSION "1.0" + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/wait.h> +#include <asm/io.h> + +#include "paride.h" + +#define j44(a,b) (((a>>4)&0x0f)|(b&0xf0)) + +/* cont = 0 - access the IDE register file + cont = 1 - access the IDE command set +*/ + +static int cont_map[2] = { 0x10, 0x08 }; + +static void ktti_write_regr( PIA *pi, int cont, int regr, int val) + +{ int r; + + r = regr + cont_map[cont]; + + w0(r); w2(0xb); w2(0xa); w2(3); w2(6); + w0(val); w2(3); w0(0); w2(6); w2(0xb); +} + +static int ktti_read_regr( PIA *pi, int cont, int regr ) + +{ int a, b, r; + + r = regr + cont_map[cont]; + + w0(r); w2(0xb); w2(0xa); w2(9); w2(0xc); w2(9); + a = r1(); w2(0xc); b = r1(); w2(9); w2(0xc); w2(9); + return j44(a,b); + +} + +static void ktti_read_block( PIA *pi, char * buf, int count ) + +{ int k, a, b; + + for (k=0;k<count/2;k++) { + w0(0x10); w2(0xb); w2(0xa); w2(9); w2(0xc); w2(9); + a = r1(); w2(0xc); b = r1(); w2(9); + buf[2*k] = j44(a,b); + a = r1(); w2(0xc); b = r1(); w2(9); + buf[2*k+1] = j44(a,b); + } +} + +static void ktti_write_block( PIA *pi, char * buf, int count ) + +{ int k; + + for (k=0;k<count/2;k++) { + w0(0x10); w2(0xb); w2(0xa); w2(3); w2(6); + w0(buf[2*k]); w2(3); + w0(buf[2*k+1]); w2(6); + w2(0xb); + } +} + +static void ktti_connect ( PIA *pi ) + +{ pi->saved_r0 = r0(); + pi->saved_r2 = r2(); + w2(0xb); w2(0xa); w0(0); w2(3); w2(6); +} + +static void ktti_disconnect ( PIA *pi ) + +{ w2(0xb); w2(0xa); w0(0xa0); w2(3); w2(4); + w0(pi->saved_r0); + w2(pi->saved_r2); +} + +static void ktti_log_adapter( PIA *pi, char * scratch, int verbose ) + +{ printk("%s: ktti %s, KT adapter at 0x%x, delay %d\n", + pi->device,KTTI_VERSION,pi->port,pi->delay); + +} + +static struct pi_protocol ktti = { + .owner = THIS_MODULE, + .name = "ktti", + .max_mode = 1, + .epp_first = 2, + .default_delay = 1, + .max_units = 1, + .write_regr = ktti_write_regr, + .read_regr = ktti_read_regr, + .write_block = ktti_write_block, + .read_block = ktti_read_block, + .connect = ktti_connect, + .disconnect = ktti_disconnect, + .log_adapter = ktti_log_adapter, +}; + +static int __init ktti_init(void) +{ + return paride_register(&ktti); +} + +static void __exit ktti_exit(void) +{ + paride_unregister(&ktti); +} + +MODULE_LICENSE("GPL"); +module_init(ktti_init) +module_exit(ktti_exit) diff --git a/drivers/block/paride/mkd b/drivers/block/paride/mkd new file mode 100644 index 000000000..6d0d80247 --- /dev/null +++ b/drivers/block/paride/mkd @@ -0,0 +1,31 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# +# mkd -- a script to create the device special files for the PARIDE subsystem +# +# block devices: pd (45), pcd (46), pf (47) +# character devices: pt (96), pg (97) +# +function mkdev { + mknod $1 $2 $3 $4 ; chmod 0660 $1 ; chown root:disk $1 +} +# +function pd { + D=$( printf \\$( printf "x%03x" $[ $1 + 97 ] ) ) + mkdev pd$D b 45 $[ $1 * 16 ] + for P in 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 + do mkdev pd$D$P b 45 $[ $1 * 16 + $P ] + done +} +# +cd /dev +# +for u in 0 1 2 3 ; do pd $u ; done +for u in 0 1 2 3 ; do mkdev pcd$u b 46 $u ; done +for u in 0 1 2 3 ; do mkdev pf$u b 47 $u ; done +for u in 0 1 2 3 ; do mkdev pt$u c 96 $u ; done +for u in 0 1 2 3 ; do mkdev npt$u c 96 $[ $u + 128 ] ; done +for u in 0 1 2 3 ; do mkdev pg$u c 97 $u ; done +# +# end of mkd + diff --git a/drivers/block/paride/on20.c b/drivers/block/paride/on20.c new file mode 100644 index 000000000..0173697a1 --- /dev/null +++ b/drivers/block/paride/on20.c @@ -0,0 +1,153 @@ +/* + on20.c (c) 1996-8 Grant R. Guenther <grant@torque.net> + Under the terms of the GNU General Public License. + + on20.c is a low-level protocol driver for the + Onspec 90c20 parallel to IDE adapter. +*/ + +/* Changes: + + 1.01 GRG 1998.05.06 init_proto, release_proto + +*/ + +#define ON20_VERSION "1.01" + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/wait.h> +#include <asm/io.h> + +#include "paride.h" + +#define op(f) w2(4);w0(f);w2(5);w2(0xd);w2(5);w2(0xd);w2(5);w2(4); +#define vl(v) w2(4);w0(v);w2(5);w2(7);w2(5);w2(4); + +#define j44(a,b) (((a>>4)&0x0f)|(b&0xf0)) + +/* cont = 0 - access the IDE register file + cont = 1 - access the IDE command set +*/ + +static int on20_read_regr( PIA *pi, int cont, int regr ) + +{ int h,l, r ; + + r = (regr<<2) + 1 + cont; + + op(1); vl(r); op(0); + + switch (pi->mode) { + + case 0: w2(4); w2(6); l = r1(); + w2(4); w2(6); h = r1(); + w2(4); w2(6); w2(4); w2(6); w2(4); + return j44(l,h); + + case 1: w2(4); w2(0x26); r = r0(); + w2(4); w2(0x26); w2(4); + return r; + + } + return -1; +} + +static void on20_write_regr( PIA *pi, int cont, int regr, int val ) + +{ int r; + + r = (regr<<2) + 1 + cont; + + op(1); vl(r); + op(0); vl(val); + op(0); vl(val); +} + +static void on20_connect ( PIA *pi) + +{ pi->saved_r0 = r0(); + pi->saved_r2 = r2(); + + w2(4);w0(0);w2(0xc);w2(4);w2(6);w2(4);w2(6);w2(4); + if (pi->mode) { op(2); vl(8); op(2); vl(9); } + else { op(2); vl(0); op(2); vl(8); } +} + +static void on20_disconnect ( PIA *pi ) + +{ w2(4);w0(7);w2(4);w2(0xc);w2(4); + w0(pi->saved_r0); + w2(pi->saved_r2); +} + +static void on20_read_block( PIA *pi, char * buf, int count ) + +{ int k, l, h; + + op(1); vl(1); op(0); + + for (k=0;k<count;k++) + if (pi->mode) { + w2(4); w2(0x26); buf[k] = r0(); + } else { + w2(6); l = r1(); w2(4); + w2(6); h = r1(); w2(4); + buf[k] = j44(l,h); + } + w2(4); +} + +static void on20_write_block( PIA *pi, char * buf, int count ) + +{ int k; + + op(1); vl(1); op(0); + + for (k=0;k<count;k++) { w2(5); w0(buf[k]); w2(7); } + w2(4); +} + +static void on20_log_adapter( PIA *pi, char * scratch, int verbose ) + +{ char *mode_string[2] = {"4-bit","8-bit"}; + + printk("%s: on20 %s, OnSpec 90c20 at 0x%x, ", + pi->device,ON20_VERSION,pi->port); + printk("mode %d (%s), delay %d\n",pi->mode, + mode_string[pi->mode],pi->delay); + +} + +static struct pi_protocol on20 = { + .owner = THIS_MODULE, + .name = "on20", + .max_mode = 2, + .epp_first = 2, + .default_delay = 1, + .max_units = 1, + .write_regr = on20_write_regr, + .read_regr = on20_read_regr, + .write_block = on20_write_block, + .read_block = on20_read_block, + .connect = on20_connect, + .disconnect = on20_disconnect, + .log_adapter = on20_log_adapter, +}; + +static int __init on20_init(void) +{ + return paride_register(&on20); +} + +static void __exit on20_exit(void) +{ + paride_unregister(&on20); +} + +MODULE_LICENSE("GPL"); +module_init(on20_init) +module_exit(on20_exit) diff --git a/drivers/block/paride/on26.c b/drivers/block/paride/on26.c new file mode 100644 index 000000000..95ba25692 --- /dev/null +++ b/drivers/block/paride/on26.c @@ -0,0 +1,319 @@ +/* + on26.c (c) 1997-8 Grant R. Guenther <grant@torque.net> + Under the terms of the GNU General Public License. + + on26.c is a low-level protocol driver for the + OnSpec 90c26 parallel to IDE adapter chip. + +*/ + +/* Changes: + + 1.01 GRG 1998.05.06 init_proto, release_proto + 1.02 GRG 1998.09.23 updates for the -E rev chip + 1.03 GRG 1998.12.14 fix for slave drives + 1.04 GRG 1998.12.20 yet another bug fix + +*/ + +#define ON26_VERSION "1.04" + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/wait.h> +#include <asm/io.h> + +#include "paride.h" + +/* mode codes: 0 nybble reads, 8-bit writes + 1 8-bit reads and writes + 2 8-bit EPP mode + 3 EPP-16 + 4 EPP-32 +*/ + +#define j44(a,b) (((a>>4)&0x0f)|(b&0xf0)) + +#define P1 w2(5);w2(0xd);w2(5);w2(0xd);w2(5);w2(4); +#define P2 w2(5);w2(7);w2(5);w2(4); + +/* cont = 0 - access the IDE register file + cont = 1 - access the IDE command set +*/ + +static int on26_read_regr( PIA *pi, int cont, int regr ) + +{ int a, b, r; + + r = (regr<<2) + 1 + cont; + + switch (pi->mode) { + + case 0: w0(1); P1; w0(r); P2; w0(0); P1; + w2(6); a = r1(); w2(4); + w2(6); b = r1(); w2(4); + w2(6); w2(4); w2(6); w2(4); + return j44(a,b); + + case 1: w0(1); P1; w0(r); P2; w0(0); P1; + w2(0x26); a = r0(); w2(4); w2(0x26); w2(4); + return a; + + case 2: + case 3: + case 4: w3(1); w3(1); w2(5); w4(r); w2(4); + w3(0); w3(0); w2(0x24); a = r4(); w2(4); + w2(0x24); (void)r4(); w2(4); + return a; + + } + return -1; +} + +static void on26_write_regr( PIA *pi, int cont, int regr, int val ) + +{ int r; + + r = (regr<<2) + 1 + cont; + + switch (pi->mode) { + + case 0: + case 1: w0(1); P1; w0(r); P2; w0(0); P1; + w0(val); P2; w0(val); P2; + break; + + case 2: + case 3: + case 4: w3(1); w3(1); w2(5); w4(r); w2(4); + w3(0); w3(0); + w2(5); w4(val); w2(4); + w2(5); w4(val); w2(4); + break; + } +} + +#define CCP(x) w0(0xfe);w0(0xaa);w0(0x55);w0(0);w0(0xff);\ + w0(0x87);w0(0x78);w0(x);w2(4);w2(5);w2(4);w0(0xff); + +static void on26_connect ( PIA *pi ) + +{ int x; + + pi->saved_r0 = r0(); + pi->saved_r2 = r2(); + + CCP(0x20); + x = 8; if (pi->mode) x = 9; + + w0(2); P1; w0(8); P2; + w0(2); P1; w0(x); P2; +} + +static void on26_disconnect ( PIA *pi ) + +{ if (pi->mode >= 2) { w3(4); w3(4); w3(4); w3(4); } + else { w0(4); P1; w0(4); P1; } + CCP(0x30); + w0(pi->saved_r0); + w2(pi->saved_r2); +} + +#define RESET_WAIT 200 + +static int on26_test_port( PIA *pi) /* hard reset */ + +{ int i, m, d, x=0, y=0; + + pi->saved_r0 = r0(); + pi->saved_r2 = r2(); + + d = pi->delay; + m = pi->mode; + pi->delay = 5; + pi->mode = 0; + + w2(0xc); + + CCP(0x30); CCP(0); + + w0(0xfe);w0(0xaa);w0(0x55);w0(0);w0(0xff); + i = ((r1() & 0xf0) << 4); w0(0x87); + i |= (r1() & 0xf0); w0(0x78); + w0(0x20);w2(4);w2(5); + i |= ((r1() & 0xf0) >> 4); + w2(4);w0(0xff); + + if (i == 0xb5f) { + + w0(2); P1; w0(0); P2; + w0(3); P1; w0(0); P2; + w0(2); P1; w0(8); P2; udelay(100); + w0(2); P1; w0(0xa); P2; udelay(100); + w0(2); P1; w0(8); P2; udelay(1000); + + on26_write_regr(pi,0,6,0xa0); + + for (i=0;i<RESET_WAIT;i++) { + on26_write_regr(pi,0,6,0xa0); + x = on26_read_regr(pi,0,7); + on26_write_regr(pi,0,6,0xb0); + y = on26_read_regr(pi,0,7); + if (!((x&0x80)||(y&0x80))) break; + mdelay(100); + } + + if (i == RESET_WAIT) + printk("on26: Device reset failed (%x,%x)\n",x,y); + + w0(4); P1; w0(4); P1; + } + + CCP(0x30); + + pi->delay = d; + pi->mode = m; + w0(pi->saved_r0); + w2(pi->saved_r2); + + return 5; +} + + +static void on26_read_block( PIA *pi, char * buf, int count ) + +{ int k, a, b; + + switch (pi->mode) { + + case 0: w0(1); P1; w0(1); P2; w0(2); P1; w0(0x18); P2; w0(0); P1; + udelay(10); + for (k=0;k<count;k++) { + w2(6); a = r1(); + w2(4); b = r1(); + buf[k] = j44(a,b); + } + w0(2); P1; w0(8); P2; + break; + + case 1: w0(1); P1; w0(1); P2; w0(2); P1; w0(0x19); P2; w0(0); P1; + udelay(10); + for (k=0;k<count/2;k++) { + w2(0x26); buf[2*k] = r0(); + w2(0x24); buf[2*k+1] = r0(); + } + w0(2); P1; w0(9); P2; + break; + + case 2: w3(1); w3(1); w2(5); w4(1); w2(4); + w3(0); w3(0); w2(0x24); + udelay(10); + for (k=0;k<count;k++) buf[k] = r4(); + w2(4); + break; + + case 3: w3(1); w3(1); w2(5); w4(1); w2(4); + w3(0); w3(0); w2(0x24); + udelay(10); + for (k=0;k<count/2;k++) ((u16 *)buf)[k] = r4w(); + w2(4); + break; + + case 4: w3(1); w3(1); w2(5); w4(1); w2(4); + w3(0); w3(0); w2(0x24); + udelay(10); + for (k=0;k<count/4;k++) ((u32 *)buf)[k] = r4l(); + w2(4); + break; + + } +} + +static void on26_write_block( PIA *pi, char * buf, int count ) + +{ int k; + + switch (pi->mode) { + + case 0: + case 1: w0(1); P1; w0(1); P2; + w0(2); P1; w0(0x18+pi->mode); P2; w0(0); P1; + udelay(10); + for (k=0;k<count/2;k++) { + w2(5); w0(buf[2*k]); + w2(7); w0(buf[2*k+1]); + } + w2(5); w2(4); + w0(2); P1; w0(8+pi->mode); P2; + break; + + case 2: w3(1); w3(1); w2(5); w4(1); w2(4); + w3(0); w3(0); w2(0xc5); + udelay(10); + for (k=0;k<count;k++) w4(buf[k]); + w2(0xc4); + break; + + case 3: w3(1); w3(1); w2(5); w4(1); w2(4); + w3(0); w3(0); w2(0xc5); + udelay(10); + for (k=0;k<count/2;k++) w4w(((u16 *)buf)[k]); + w2(0xc4); + break; + + case 4: w3(1); w3(1); w2(5); w4(1); w2(4); + w3(0); w3(0); w2(0xc5); + udelay(10); + for (k=0;k<count/4;k++) w4l(((u32 *)buf)[k]); + w2(0xc4); + break; + + } + +} + +static void on26_log_adapter( PIA *pi, char * scratch, int verbose ) + +{ char *mode_string[5] = {"4-bit","8-bit","EPP-8", + "EPP-16","EPP-32"}; + + printk("%s: on26 %s, OnSpec 90c26 at 0x%x, ", + pi->device,ON26_VERSION,pi->port); + printk("mode %d (%s), delay %d\n",pi->mode, + mode_string[pi->mode],pi->delay); + +} + +static struct pi_protocol on26 = { + .owner = THIS_MODULE, + .name = "on26", + .max_mode = 5, + .epp_first = 2, + .default_delay = 1, + .max_units = 1, + .write_regr = on26_write_regr, + .read_regr = on26_read_regr, + .write_block = on26_write_block, + .read_block = on26_read_block, + .connect = on26_connect, + .disconnect = on26_disconnect, + .test_port = on26_test_port, + .log_adapter = on26_log_adapter, +}; + +static int __init on26_init(void) +{ + return paride_register(&on26); +} + +static void __exit on26_exit(void) +{ + paride_unregister(&on26); +} + +MODULE_LICENSE("GPL"); +module_init(on26_init) +module_exit(on26_exit) diff --git a/drivers/block/paride/paride.c b/drivers/block/paride/paride.c new file mode 100644 index 000000000..0e287993b --- /dev/null +++ b/drivers/block/paride/paride.c @@ -0,0 +1,479 @@ +/* + paride.c (c) 1997-8 Grant R. Guenther <grant@torque.net> + Under the terms of the GNU General Public License. + + This is the base module for the family of device drivers + that support parallel port IDE devices. + +*/ + +/* Changes: + + 1.01 GRG 1998.05.03 Use spinlocks + 1.02 GRG 1998.05.05 init_proto, release_proto, ktti + 1.03 GRG 1998.08.15 eliminate compiler warning + 1.04 GRG 1998.11.28 added support for FRIQ + 1.05 TMW 2000.06.06 use parport_find_number instead of + parport_enumerate + 1.06 TMW 2001.03.26 more sane parport-or-not resource management +*/ + +#define PI_VERSION "1.06" + +#include <linux/module.h> +#include <linux/kmod.h> +#include <linux/types.h> +#include <linux/kernel.h> +#include <linux/ioport.h> +#include <linux/string.h> +#include <linux/spinlock.h> +#include <linux/wait.h> +#include <linux/sched.h> /* TASK_* */ +#include <linux/parport.h> +#include <linux/slab.h> + +#include "paride.h" + +MODULE_LICENSE("GPL"); + +#define MAX_PROTOS 32 + +static struct pi_protocol *protocols[MAX_PROTOS]; + +static DEFINE_SPINLOCK(pi_spinlock); + +void pi_write_regr(PIA * pi, int cont, int regr, int val) +{ + pi->proto->write_regr(pi, cont, regr, val); +} + +EXPORT_SYMBOL(pi_write_regr); + +int pi_read_regr(PIA * pi, int cont, int regr) +{ + return pi->proto->read_regr(pi, cont, regr); +} + +EXPORT_SYMBOL(pi_read_regr); + +void pi_write_block(PIA * pi, char *buf, int count) +{ + pi->proto->write_block(pi, buf, count); +} + +EXPORT_SYMBOL(pi_write_block); + +void pi_read_block(PIA * pi, char *buf, int count) +{ + pi->proto->read_block(pi, buf, count); +} + +EXPORT_SYMBOL(pi_read_block); + +static void pi_wake_up(void *p) +{ + PIA *pi = (PIA *) p; + unsigned long flags; + void (*cont) (void) = NULL; + + spin_lock_irqsave(&pi_spinlock, flags); + + if (pi->claim_cont && !parport_claim(pi->pardev)) { + cont = pi->claim_cont; + pi->claim_cont = NULL; + pi->claimed = 1; + } + + spin_unlock_irqrestore(&pi_spinlock, flags); + + wake_up(&(pi->parq)); + + if (cont) + cont(); +} + +int pi_schedule_claimed(PIA * pi, void (*cont) (void)) +{ + unsigned long flags; + + spin_lock_irqsave(&pi_spinlock, flags); + if (pi->pardev && parport_claim(pi->pardev)) { + pi->claim_cont = cont; + spin_unlock_irqrestore(&pi_spinlock, flags); + return 0; + } + pi->claimed = 1; + spin_unlock_irqrestore(&pi_spinlock, flags); + return 1; +} +EXPORT_SYMBOL(pi_schedule_claimed); + +void pi_do_claimed(PIA * pi, void (*cont) (void)) +{ + if (pi_schedule_claimed(pi, cont)) + cont(); +} + +EXPORT_SYMBOL(pi_do_claimed); + +static void pi_claim(PIA * pi) +{ + if (pi->claimed) + return; + pi->claimed = 1; + if (pi->pardev) + wait_event(pi->parq, + !parport_claim((struct pardevice *) pi->pardev)); +} + +static void pi_unclaim(PIA * pi) +{ + pi->claimed = 0; + if (pi->pardev) + parport_release((struct pardevice *) (pi->pardev)); +} + +void pi_connect(PIA * pi) +{ + pi_claim(pi); + pi->proto->connect(pi); +} + +EXPORT_SYMBOL(pi_connect); + +void pi_disconnect(PIA * pi) +{ + pi->proto->disconnect(pi); + pi_unclaim(pi); +} + +EXPORT_SYMBOL(pi_disconnect); + +static void pi_unregister_parport(PIA * pi) +{ + if (pi->pardev) { + parport_unregister_device((struct pardevice *) (pi->pardev)); + pi->pardev = NULL; + } +} + +void pi_release(PIA * pi) +{ + pi_unregister_parport(pi); + if (pi->proto->release_proto) + pi->proto->release_proto(pi); + module_put(pi->proto->owner); +} + +EXPORT_SYMBOL(pi_release); + +static int default_test_proto(PIA * pi, char *scratch, int verbose) +{ + int j, k; + int e[2] = { 0, 0 }; + + pi->proto->connect(pi); + + for (j = 0; j < 2; j++) { + pi_write_regr(pi, 0, 6, 0xa0 + j * 0x10); + for (k = 0; k < 256; k++) { + pi_write_regr(pi, 0, 2, k ^ 0xaa); + pi_write_regr(pi, 0, 3, k ^ 0x55); + if (pi_read_regr(pi, 0, 2) != (k ^ 0xaa)) + e[j]++; + } + } + pi->proto->disconnect(pi); + + if (verbose) + printk("%s: %s: port 0x%x, mode %d, test=(%d,%d)\n", + pi->device, pi->proto->name, pi->port, + pi->mode, e[0], e[1]); + + return (e[0] && e[1]); /* not here if both > 0 */ +} + +static int pi_test_proto(PIA * pi, char *scratch, int verbose) +{ + int res; + + pi_claim(pi); + if (pi->proto->test_proto) + res = pi->proto->test_proto(pi, scratch, verbose); + else + res = default_test_proto(pi, scratch, verbose); + pi_unclaim(pi); + + return res; +} + +int paride_register(PIP * pr) +{ + int k; + + for (k = 0; k < MAX_PROTOS; k++) + if (protocols[k] && !strcmp(pr->name, protocols[k]->name)) { + printk("paride: %s protocol already registered\n", + pr->name); + return -1; + } + k = 0; + while ((k < MAX_PROTOS) && (protocols[k])) + k++; + if (k == MAX_PROTOS) { + printk("paride: protocol table full\n"); + return -1; + } + protocols[k] = pr; + pr->index = k; + printk("paride: %s registered as protocol %d\n", pr->name, k); + return 0; +} + +EXPORT_SYMBOL(paride_register); + +void paride_unregister(PIP * pr) +{ + if (!pr) + return; + if (protocols[pr->index] != pr) { + printk("paride: %s not registered\n", pr->name); + return; + } + protocols[pr->index] = NULL; +} + +EXPORT_SYMBOL(paride_unregister); + +static int pi_register_parport(PIA *pi, int verbose, int unit) +{ + struct parport *port; + struct pardev_cb par_cb; + + port = parport_find_base(pi->port); + if (!port) + return 0; + memset(&par_cb, 0, sizeof(par_cb)); + par_cb.wakeup = pi_wake_up; + par_cb.private = (void *)pi; + pi->pardev = parport_register_dev_model(port, pi->device, &par_cb, + unit); + parport_put_port(port); + if (!pi->pardev) + return 0; + + init_waitqueue_head(&pi->parq); + + if (verbose) + printk("%s: 0x%x is %s\n", pi->device, pi->port, port->name); + + pi->parname = (char *) port->name; + + return 1; +} + +static int pi_probe_mode(PIA * pi, int max, char *scratch, int verbose) +{ + int best, range; + + if (pi->mode != -1) { + if (pi->mode >= max) + return 0; + range = 3; + if (pi->mode >= pi->proto->epp_first) + range = 8; + if ((range == 8) && (pi->port % 8)) + return 0; + pi->reserved = range; + return (!pi_test_proto(pi, scratch, verbose)); + } + best = -1; + for (pi->mode = 0; pi->mode < max; pi->mode++) { + range = 3; + if (pi->mode >= pi->proto->epp_first) + range = 8; + if ((range == 8) && (pi->port % 8)) + break; + pi->reserved = range; + if (!pi_test_proto(pi, scratch, verbose)) + best = pi->mode; + } + pi->mode = best; + return (best > -1); +} + +static int pi_probe_unit(PIA * pi, int unit, char *scratch, int verbose) +{ + int max, s, e; + + s = unit; + e = s + 1; + + if (s == -1) { + s = 0; + e = pi->proto->max_units; + } + + if (!pi_register_parport(pi, verbose, s)) + return 0; + + if (pi->proto->test_port) { + pi_claim(pi); + max = pi->proto->test_port(pi); + pi_unclaim(pi); + } else + max = pi->proto->max_mode; + + if (pi->proto->probe_unit) { + pi_claim(pi); + for (pi->unit = s; pi->unit < e; pi->unit++) + if (pi->proto->probe_unit(pi)) { + pi_unclaim(pi); + if (pi_probe_mode(pi, max, scratch, verbose)) + return 1; + pi_unregister_parport(pi); + return 0; + } + pi_unclaim(pi); + pi_unregister_parport(pi); + return 0; + } + + if (!pi_probe_mode(pi, max, scratch, verbose)) { + pi_unregister_parport(pi); + return 0; + } + return 1; + +} + +int pi_init(PIA * pi, int autoprobe, int port, int mode, + int unit, int protocol, int delay, char *scratch, + int devtype, int verbose, char *device) +{ + int p, k, s, e; + int lpts[7] = { 0x3bc, 0x378, 0x278, 0x268, 0x27c, 0x26c, 0 }; + + s = protocol; + e = s + 1; + + if (!protocols[0]) + request_module("paride_protocol"); + + if (autoprobe) { + s = 0; + e = MAX_PROTOS; + } else if ((s < 0) || (s >= MAX_PROTOS) || (port <= 0) || + (!protocols[s]) || (unit < 0) || + (unit >= protocols[s]->max_units)) { + printk("%s: Invalid parameters\n", device); + return 0; + } + + for (p = s; p < e; p++) { + struct pi_protocol *proto = protocols[p]; + if (!proto) + continue; + /* still racy */ + if (!try_module_get(proto->owner)) + continue; + pi->proto = proto; + pi->private = 0; + if (proto->init_proto && proto->init_proto(pi) < 0) { + pi->proto = NULL; + module_put(proto->owner); + continue; + } + if (delay == -1) + pi->delay = pi->proto->default_delay; + else + pi->delay = delay; + pi->devtype = devtype; + pi->device = device; + + pi->parname = NULL; + pi->pardev = NULL; + init_waitqueue_head(&pi->parq); + pi->claimed = 0; + pi->claim_cont = NULL; + + pi->mode = mode; + if (port != -1) { + pi->port = port; + if (pi_probe_unit(pi, unit, scratch, verbose)) + break; + pi->port = 0; + } else { + k = 0; + while ((pi->port = lpts[k++])) + if (pi_probe_unit + (pi, unit, scratch, verbose)) + break; + if (pi->port) + break; + } + if (pi->proto->release_proto) + pi->proto->release_proto(pi); + module_put(proto->owner); + } + + if (!pi->port) { + if (autoprobe) + printk("%s: Autoprobe failed\n", device); + else + printk("%s: Adapter not found\n", device); + return 0; + } + + if (pi->parname) + printk("%s: Sharing %s at 0x%x\n", pi->device, + pi->parname, pi->port); + + pi->proto->log_adapter(pi, scratch, verbose); + + return 1; +} + +EXPORT_SYMBOL(pi_init); + +static int pi_probe(struct pardevice *par_dev) +{ + struct device_driver *drv = par_dev->dev.driver; + int len = strlen(drv->name); + + if (strncmp(par_dev->name, drv->name, len)) + return -ENODEV; + + return 0; +} + +void *pi_register_driver(char *name) +{ + struct parport_driver *parp_drv; + int ret; + + parp_drv = kzalloc(sizeof(*parp_drv), GFP_KERNEL); + if (!parp_drv) + return NULL; + + parp_drv->name = name; + parp_drv->probe = pi_probe; + parp_drv->devmodel = true; + + ret = parport_register_driver(parp_drv); + if (ret) { + kfree(parp_drv); + return NULL; + } + return (void *)parp_drv; +} +EXPORT_SYMBOL(pi_register_driver); + +void pi_unregister_driver(void *_drv) +{ + struct parport_driver *drv = _drv; + + parport_unregister_driver(drv); + kfree(drv); +} +EXPORT_SYMBOL(pi_unregister_driver); diff --git a/drivers/block/paride/paride.h b/drivers/block/paride/paride.h new file mode 100644 index 000000000..ddb9e589d --- /dev/null +++ b/drivers/block/paride/paride.h @@ -0,0 +1,172 @@ +#ifndef __DRIVERS_PARIDE_H__ +#define __DRIVERS_PARIDE_H__ + +/* + paride.h (c) 1997-8 Grant R. Guenther <grant@torque.net> + Under the terms of the GPL. + + This file defines the interface between the high-level parallel + IDE device drivers (pd, pf, pcd, pt) and the adapter chips. + +*/ + +/* Changes: + + 1.01 GRG 1998.05.05 init_proto, release_proto +*/ + +#define PARIDE_H_VERSION "1.01" + +/* Some adapters need to know what kind of device they are in + + Values for devtype: +*/ + +#define PI_PD 0 /* IDE disk */ +#define PI_PCD 1 /* ATAPI CDrom */ +#define PI_PF 2 /* ATAPI disk */ +#define PI_PT 3 /* ATAPI tape */ +#define PI_PG 4 /* ATAPI generic */ + +/* The paride module contains no state, instead the drivers allocate + a pi_adapter data structure and pass it to paride in every operation. + +*/ + +struct pi_adapter { + + struct pi_protocol *proto; /* adapter protocol */ + int port; /* base address of parallel port */ + int mode; /* transfer mode in use */ + int delay; /* adapter delay setting */ + int devtype; /* device type: PI_PD etc. */ + char *device; /* name of driver */ + int unit; /* unit number for chained adapters */ + int saved_r0; /* saved port state */ + int saved_r2; /* saved port state */ + int reserved; /* number of ports reserved */ + unsigned long private; /* for protocol module */ + + wait_queue_head_t parq; /* semaphore for parport sharing */ + void *pardev; /* pointer to pardevice */ + char *parname; /* parport name */ + int claimed; /* parport has already been claimed */ + void (*claim_cont)(void); /* continuation for parport wait */ +}; + +typedef struct pi_adapter PIA; + +/* functions exported by paride to the high level drivers */ + +extern int pi_init(PIA *pi, + int autoprobe, /* 1 to autoprobe */ + int port, /* base port address */ + int mode, /* -1 for autoprobe */ + int unit, /* unit number, if supported */ + int protocol, /* protocol to use */ + int delay, /* -1 to use adapter specific default */ + char * scratch, /* address of 512 byte buffer */ + int devtype, /* device type: PI_PD, PI_PCD, etc ... */ + int verbose, /* log verbose data while probing */ + char *device /* name of the driver */ + ); /* returns 0 on failure, 1 on success */ + +extern void pi_release(PIA *pi); + +/* registers are addressed as (cont,regr) + + cont: 0 for command register file, 1 for control register(s) + regr: 0-7 for register number. + +*/ + +extern void pi_write_regr(PIA *pi, int cont, int regr, int val); + +extern int pi_read_regr(PIA *pi, int cont, int regr); + +extern void pi_write_block(PIA *pi, char * buf, int count); + +extern void pi_read_block(PIA *pi, char * buf, int count); + +extern void pi_connect(PIA *pi); + +extern void pi_disconnect(PIA *pi); + +extern void pi_do_claimed(PIA *pi, void (*cont)(void)); +extern int pi_schedule_claimed(PIA *pi, void (*cont)(void)); + +/* macros and functions exported to the protocol modules */ + +#define delay_p (pi->delay?udelay(pi->delay):(void)0) +#define out_p(offs,byte) outb(byte,pi->port+offs); delay_p; +#define in_p(offs) (delay_p,inb(pi->port+offs)) + +#define w0(byte) {out_p(0,byte);} +#define r0() (in_p(0) & 0xff) +#define w1(byte) {out_p(1,byte);} +#define r1() (in_p(1) & 0xff) +#define w2(byte) {out_p(2,byte);} +#define r2() (in_p(2) & 0xff) +#define w3(byte) {out_p(3,byte);} +#define w4(byte) {out_p(4,byte);} +#define r4() (in_p(4) & 0xff) +#define w4w(data) {outw(data,pi->port+4); delay_p;} +#define w4l(data) {outl(data,pi->port+4); delay_p;} +#define r4w() (delay_p,inw(pi->port+4)&0xffff) +#define r4l() (delay_p,inl(pi->port+4)&0xffffffff) + +static inline u16 pi_swab16( char *b, int k) + +{ union { u16 u; char t[2]; } r; + + r.t[0]=b[2*k+1]; r.t[1]=b[2*k]; + return r.u; +} + +static inline u32 pi_swab32( char *b, int k) + +{ union { u32 u; char f[4]; } r; + + r.f[0]=b[4*k+1]; r.f[1]=b[4*k]; + r.f[2]=b[4*k+3]; r.f[3]=b[4*k+2]; + return r.u; +} + +struct pi_protocol { + + char name[8]; /* name for this protocol */ + int index; /* index into protocol table */ + + int max_mode; /* max mode number */ + int epp_first; /* modes >= this use 8 ports */ + + int default_delay; /* delay parameter if not specified */ + int max_units; /* max chained units probed for */ + + void (*write_regr)(PIA *,int,int,int); + int (*read_regr)(PIA *,int,int); + void (*write_block)(PIA *,char *,int); + void (*read_block)(PIA *,char *,int); + + void (*connect)(PIA *); + void (*disconnect)(PIA *); + + int (*test_port)(PIA *); + int (*probe_unit)(PIA *); + int (*test_proto)(PIA *,char *,int); + void (*log_adapter)(PIA *,char *,int); + + int (*init_proto)(PIA *); + void (*release_proto)(PIA *); + struct module *owner; +}; + +typedef struct pi_protocol PIP; + +extern int paride_register( PIP * ); +extern void paride_unregister ( PIP * ); +void *pi_register_driver(char *); +void pi_unregister_driver(void *); + +#endif /* __DRIVERS_PARIDE_H__ */ +/* end of paride.h */ diff --git a/drivers/block/paride/pcd.c b/drivers/block/paride/pcd.c new file mode 100644 index 000000000..a026211af --- /dev/null +++ b/drivers/block/paride/pcd.c @@ -0,0 +1,1022 @@ +/* + pcd.c (c) 1997-8 Grant R. Guenther <grant@torque.net> + Under the terms of the GNU General Public License. + + This is a high-level driver for parallel port ATAPI CD-ROM + drives based on chips supported by the paride module. + + By default, the driver will autoprobe for a single parallel + port ATAPI CD-ROM drive, but if their individual parameters are + specified, the driver can handle up to 4 drives. + + The behaviour of the pcd driver can be altered by setting + some parameters from the insmod command line. The following + parameters are adjustable: + + drive0 These four arguments can be arrays of + drive1 1-6 integers as follows: + drive2 + drive3 <prt>,<pro>,<uni>,<mod>,<slv>,<dly> + + Where, + + <prt> is the base of the parallel port address for + the corresponding drive. (required) + + <pro> is the protocol number for the adapter that + supports this drive. These numbers are + logged by 'paride' when the protocol modules + are initialised. (0 if not given) + + <uni> for those adapters that support chained + devices, this is the unit selector for the + chain of devices on the given port. It should + be zero for devices that don't support chaining. + (0 if not given) + + <mod> this can be -1 to choose the best mode, or one + of the mode numbers supported by the adapter. + (-1 if not given) + + <slv> ATAPI CD-ROMs can be jumpered to master or slave. + Set this to 0 to choose the master drive, 1 to + choose the slave, -1 (the default) to choose the + first drive found. + + <dly> some parallel ports require the driver to + go more slowly. -1 sets a default value that + should work with the chosen protocol. Otherwise, + set this to a small integer, the larger it is + the slower the port i/o. In some cases, setting + this to zero will speed up the device. (default -1) + + major You may use this parameter to override the + default major number (46) that this driver + will use. Be sure to change the device + name as well. + + name This parameter is a character string that + contains the name the kernel will use for this + device (in /proc output, for instance). + (default "pcd") + + verbose This parameter controls the amount of logging + that the driver will do. Set it to 0 for + normal operation, 1 to see autoprobe progress + messages, or 2 to see additional debugging + output. (default 0) + + nice This parameter controls the driver's use of + idle CPU time, at the expense of some speed. + + If this driver is built into the kernel, you can use the + following kernel command line parameters, with the same values + as the corresponding module parameters listed above: + + pcd.drive0 + pcd.drive1 + pcd.drive2 + pcd.drive3 + pcd.nice + + In addition, you can use the parameter pcd.disable to disable + the driver entirely. + +*/ + +/* Changes: + + 1.01 GRG 1998.01.24 Added test unit ready support + 1.02 GRG 1998.05.06 Changes to pcd_completion, ready_wait, + and loosen interpretation of ATAPI + standard for clearing error status. + Use spinlocks. Eliminate sti(). + 1.03 GRG 1998.06.16 Eliminated an Ugh + 1.04 GRG 1998.08.15 Added extra debugging, improvements to + pcd_completion, use HZ in loop timing + 1.05 GRG 1998.08.16 Conformed to "Uniform CD-ROM" standard + 1.06 GRG 1998.08.19 Added audio ioctl support + 1.07 GRG 1998.09.24 Increased reset timeout, added jumbo support + +*/ + +#define PCD_VERSION "1.07" +#define PCD_MAJOR 46 +#define PCD_NAME "pcd" +#define PCD_UNITS 4 + +/* Here are things one can override from the insmod command. + Most are autoprobed by paride unless set here. Verbose is off + by default. + +*/ + +static int verbose = 0; +static int major = PCD_MAJOR; +static char *name = PCD_NAME; +static int nice = 0; +static int disable = 0; + +static int drive0[6] = { 0, 0, 0, -1, -1, -1 }; +static int drive1[6] = { 0, 0, 0, -1, -1, -1 }; +static int drive2[6] = { 0, 0, 0, -1, -1, -1 }; +static int drive3[6] = { 0, 0, 0, -1, -1, -1 }; + +static int (*drives[4])[6] = {&drive0, &drive1, &drive2, &drive3}; +static int pcd_drive_count; + +enum {D_PRT, D_PRO, D_UNI, D_MOD, D_SLV, D_DLY}; + +/* end of parameters */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/errno.h> +#include <linux/fs.h> +#include <linux/kernel.h> +#include <linux/delay.h> +#include <linux/cdrom.h> +#include <linux/spinlock.h> +#include <linux/blkdev.h> +#include <linux/mutex.h> +#include <linux/uaccess.h> + +static DEFINE_MUTEX(pcd_mutex); +static DEFINE_SPINLOCK(pcd_lock); + +module_param(verbose, int, 0644); +module_param(major, int, 0); +module_param(name, charp, 0); +module_param(nice, int, 0); +module_param_array(drive0, int, NULL, 0); +module_param_array(drive1, int, NULL, 0); +module_param_array(drive2, int, NULL, 0); +module_param_array(drive3, int, NULL, 0); + +#include "paride.h" +#include "pseudo.h" + +#define PCD_RETRIES 5 +#define PCD_TMO 800 /* timeout in jiffies */ +#define PCD_DELAY 50 /* spin delay in uS */ +#define PCD_READY_TMO 20 /* in seconds */ +#define PCD_RESET_TMO 100 /* in tenths of a second */ + +#define PCD_SPIN (1000000*PCD_TMO)/(HZ*PCD_DELAY) + +#define IDE_ERR 0x01 +#define IDE_DRQ 0x08 +#define IDE_READY 0x40 +#define IDE_BUSY 0x80 + +static int pcd_open(struct cdrom_device_info *cdi, int purpose); +static void pcd_release(struct cdrom_device_info *cdi); +static int pcd_drive_status(struct cdrom_device_info *cdi, int slot_nr); +static unsigned int pcd_check_events(struct cdrom_device_info *cdi, + unsigned int clearing, int slot_nr); +static int pcd_tray_move(struct cdrom_device_info *cdi, int position); +static int pcd_lock_door(struct cdrom_device_info *cdi, int lock); +static int pcd_drive_reset(struct cdrom_device_info *cdi); +static int pcd_get_mcn(struct cdrom_device_info *cdi, struct cdrom_mcn *mcn); +static int pcd_audio_ioctl(struct cdrom_device_info *cdi, + unsigned int cmd, void *arg); +static int pcd_packet(struct cdrom_device_info *cdi, + struct packet_command *cgc); + +static int pcd_detect(void); +static void pcd_probe_capabilities(void); +static void do_pcd_read_drq(void); +static void do_pcd_request(struct request_queue * q); +static void do_pcd_read(void); + +struct pcd_unit { + struct pi_adapter pia; /* interface to paride layer */ + struct pi_adapter *pi; + int drive; /* master/slave */ + int last_sense; /* result of last request sense */ + int changed; /* media change seen */ + int present; /* does this unit exist ? */ + char *name; /* pcd0, pcd1, etc */ + struct cdrom_device_info info; /* uniform cdrom interface */ + struct gendisk *disk; +}; + +static struct pcd_unit pcd[PCD_UNITS]; + +static char pcd_scratch[64]; +static char pcd_buffer[2048]; /* raw block buffer */ +static int pcd_bufblk = -1; /* block in buffer, in CD units, + -1 for nothing there. See also + pd_unit. + */ + +/* the variables below are used mainly in the I/O request engine, which + processes only one request at a time. +*/ + +static struct pcd_unit *pcd_current; /* current request's drive */ +static struct request *pcd_req; +static int pcd_retries; /* retries on current request */ +static int pcd_busy; /* request being processed ? */ +static int pcd_sector; /* address of next requested sector */ +static int pcd_count; /* number of blocks still to do */ +static char *pcd_buf; /* buffer for request in progress */ +static void *par_drv; /* reference of parport driver */ + +/* kernel glue structures */ + +static int pcd_block_open(struct block_device *bdev, fmode_t mode) +{ + struct pcd_unit *cd = bdev->bd_disk->private_data; + int ret; + + check_disk_change(bdev); + + mutex_lock(&pcd_mutex); + ret = cdrom_open(&cd->info, bdev, mode); + mutex_unlock(&pcd_mutex); + + return ret; +} + +static void pcd_block_release(struct gendisk *disk, fmode_t mode) +{ + struct pcd_unit *cd = disk->private_data; + mutex_lock(&pcd_mutex); + cdrom_release(&cd->info, mode); + mutex_unlock(&pcd_mutex); +} + +static int pcd_block_ioctl(struct block_device *bdev, fmode_t mode, + unsigned cmd, unsigned long arg) +{ + struct pcd_unit *cd = bdev->bd_disk->private_data; + int ret; + + mutex_lock(&pcd_mutex); + ret = cdrom_ioctl(&cd->info, bdev, mode, cmd, arg); + mutex_unlock(&pcd_mutex); + + return ret; +} + +static unsigned int pcd_block_check_events(struct gendisk *disk, + unsigned int clearing) +{ + struct pcd_unit *cd = disk->private_data; + return cdrom_check_events(&cd->info, clearing); +} + +static const struct block_device_operations pcd_bdops = { + .owner = THIS_MODULE, + .open = pcd_block_open, + .release = pcd_block_release, + .ioctl = pcd_block_ioctl, + .check_events = pcd_block_check_events, +}; + +static const struct cdrom_device_ops pcd_dops = { + .open = pcd_open, + .release = pcd_release, + .drive_status = pcd_drive_status, + .check_events = pcd_check_events, + .tray_move = pcd_tray_move, + .lock_door = pcd_lock_door, + .get_mcn = pcd_get_mcn, + .reset = pcd_drive_reset, + .audio_ioctl = pcd_audio_ioctl, + .generic_packet = pcd_packet, + .capability = CDC_CLOSE_TRAY | CDC_OPEN_TRAY | CDC_LOCK | + CDC_MCN | CDC_MEDIA_CHANGED | CDC_RESET | + CDC_PLAY_AUDIO | CDC_GENERIC_PACKET | CDC_CD_R | + CDC_CD_RW, +}; + +static void pcd_init_units(void) +{ + struct pcd_unit *cd; + int unit; + + pcd_drive_count = 0; + for (unit = 0, cd = pcd; unit < PCD_UNITS; unit++, cd++) { + struct gendisk *disk = alloc_disk(1); + if (!disk) + continue; + disk->queue = blk_init_queue(do_pcd_request, &pcd_lock); + if (!disk->queue) { + put_disk(disk); + continue; + } + blk_queue_bounce_limit(disk->queue, BLK_BOUNCE_HIGH); + cd->disk = disk; + cd->pi = &cd->pia; + cd->present = 0; + cd->last_sense = 0; + cd->changed = 1; + cd->drive = (*drives[unit])[D_SLV]; + if ((*drives[unit])[D_PRT]) + pcd_drive_count++; + + cd->name = &cd->info.name[0]; + snprintf(cd->name, sizeof(cd->info.name), "%s%d", name, unit); + cd->info.ops = &pcd_dops; + cd->info.handle = cd; + cd->info.speed = 0; + cd->info.capacity = 1; + cd->info.mask = 0; + disk->major = major; + disk->first_minor = unit; + strcpy(disk->disk_name, cd->name); /* umm... */ + disk->fops = &pcd_bdops; + disk->flags = GENHD_FL_BLOCK_EVENTS_ON_EXCL_WRITE; + } +} + +static int pcd_open(struct cdrom_device_info *cdi, int purpose) +{ + struct pcd_unit *cd = cdi->handle; + if (!cd->present) + return -ENODEV; + return 0; +} + +static void pcd_release(struct cdrom_device_info *cdi) +{ +} + +static inline int status_reg(struct pcd_unit *cd) +{ + return pi_read_regr(cd->pi, 1, 6); +} + +static inline int read_reg(struct pcd_unit *cd, int reg) +{ + return pi_read_regr(cd->pi, 0, reg); +} + +static inline void write_reg(struct pcd_unit *cd, int reg, int val) +{ + pi_write_regr(cd->pi, 0, reg, val); +} + +static int pcd_wait(struct pcd_unit *cd, int go, int stop, char *fun, char *msg) +{ + int j, r, e, s, p; + + j = 0; + while ((((r = status_reg(cd)) & go) || (stop && (!(r & stop)))) + && (j++ < PCD_SPIN)) + udelay(PCD_DELAY); + + if ((r & (IDE_ERR & stop)) || (j > PCD_SPIN)) { + s = read_reg(cd, 7); + e = read_reg(cd, 1); + p = read_reg(cd, 2); + if (j > PCD_SPIN) + e |= 0x100; + if (fun) + printk("%s: %s %s: alt=0x%x stat=0x%x err=0x%x" + " loop=%d phase=%d\n", + cd->name, fun, msg, r, s, e, j, p); + return (s << 8) + r; + } + return 0; +} + +static int pcd_command(struct pcd_unit *cd, char *cmd, int dlen, char *fun) +{ + pi_connect(cd->pi); + + write_reg(cd, 6, 0xa0 + 0x10 * cd->drive); + + if (pcd_wait(cd, IDE_BUSY | IDE_DRQ, 0, fun, "before command")) { + pi_disconnect(cd->pi); + return -1; + } + + write_reg(cd, 4, dlen % 256); + write_reg(cd, 5, dlen / 256); + write_reg(cd, 7, 0xa0); /* ATAPI packet command */ + + if (pcd_wait(cd, IDE_BUSY, IDE_DRQ, fun, "command DRQ")) { + pi_disconnect(cd->pi); + return -1; + } + + if (read_reg(cd, 2) != 1) { + printk("%s: %s: command phase error\n", cd->name, fun); + pi_disconnect(cd->pi); + return -1; + } + + pi_write_block(cd->pi, cmd, 12); + + return 0; +} + +static int pcd_completion(struct pcd_unit *cd, char *buf, char *fun) +{ + int r, d, p, n, k, j; + + r = -1; + k = 0; + j = 0; + + if (!pcd_wait(cd, IDE_BUSY, IDE_DRQ | IDE_READY | IDE_ERR, + fun, "completion")) { + r = 0; + while (read_reg(cd, 7) & IDE_DRQ) { + d = read_reg(cd, 4) + 256 * read_reg(cd, 5); + n = (d + 3) & 0xfffc; + p = read_reg(cd, 2) & 3; + + if ((p == 2) && (n > 0) && (j == 0)) { + pi_read_block(cd->pi, buf, n); + if (verbose > 1) + printk("%s: %s: Read %d bytes\n", + cd->name, fun, n); + r = 0; + j++; + } else { + if (verbose > 1) + printk + ("%s: %s: Unexpected phase %d, d=%d, k=%d\n", + cd->name, fun, p, d, k); + if (verbose < 2) + printk_once( + "%s: WARNING: ATAPI phase errors\n", + cd->name); + mdelay(1); + } + if (k++ > PCD_TMO) { + printk("%s: Stuck DRQ\n", cd->name); + break; + } + if (pcd_wait + (cd, IDE_BUSY, IDE_DRQ | IDE_READY | IDE_ERR, fun, + "completion")) { + r = -1; + break; + } + } + } + + pi_disconnect(cd->pi); + + return r; +} + +static void pcd_req_sense(struct pcd_unit *cd, char *fun) +{ + char rs_cmd[12] = { 0x03, 0, 0, 0, 16, 0, 0, 0, 0, 0, 0, 0 }; + char buf[16]; + int r, c; + + r = pcd_command(cd, rs_cmd, 16, "Request sense"); + mdelay(1); + if (!r) + pcd_completion(cd, buf, "Request sense"); + + cd->last_sense = -1; + c = 2; + if (!r) { + if (fun) + printk("%s: %s: Sense key: %x, ASC: %x, ASQ: %x\n", + cd->name, fun, buf[2] & 0xf, buf[12], buf[13]); + c = buf[2] & 0xf; + cd->last_sense = + c | ((buf[12] & 0xff) << 8) | ((buf[13] & 0xff) << 16); + } + if ((c == 2) || (c == 6)) + cd->changed = 1; +} + +static int pcd_atapi(struct pcd_unit *cd, char *cmd, int dlen, char *buf, char *fun) +{ + int r; + + r = pcd_command(cd, cmd, dlen, fun); + mdelay(1); + if (!r) + r = pcd_completion(cd, buf, fun); + if (r) + pcd_req_sense(cd, fun); + + return r; +} + +static int pcd_packet(struct cdrom_device_info *cdi, struct packet_command *cgc) +{ + return pcd_atapi(cdi->handle, cgc->cmd, cgc->buflen, cgc->buffer, + "generic packet"); +} + +#define DBMSG(msg) ((verbose>1)?(msg):NULL) + +static unsigned int pcd_check_events(struct cdrom_device_info *cdi, + unsigned int clearing, int slot_nr) +{ + struct pcd_unit *cd = cdi->handle; + int res = cd->changed; + if (res) + cd->changed = 0; + return res ? DISK_EVENT_MEDIA_CHANGE : 0; +} + +static int pcd_lock_door(struct cdrom_device_info *cdi, int lock) +{ + char un_cmd[12] = { 0x1e, 0, 0, 0, lock, 0, 0, 0, 0, 0, 0, 0 }; + + return pcd_atapi(cdi->handle, un_cmd, 0, pcd_scratch, + lock ? "lock door" : "unlock door"); +} + +static int pcd_tray_move(struct cdrom_device_info *cdi, int position) +{ + char ej_cmd[12] = { 0x1b, 0, 0, 0, 3 - position, 0, 0, 0, 0, 0, 0, 0 }; + + return pcd_atapi(cdi->handle, ej_cmd, 0, pcd_scratch, + position ? "eject" : "close tray"); +} + +static void pcd_sleep(int cs) +{ + schedule_timeout_interruptible(cs); +} + +static int pcd_reset(struct pcd_unit *cd) +{ + int i, k, flg; + int expect[5] = { 1, 1, 1, 0x14, 0xeb }; + + pi_connect(cd->pi); + write_reg(cd, 6, 0xa0 + 0x10 * cd->drive); + write_reg(cd, 7, 8); + + pcd_sleep(20 * HZ / 1000); /* delay a bit */ + + k = 0; + while ((k++ < PCD_RESET_TMO) && (status_reg(cd) & IDE_BUSY)) + pcd_sleep(HZ / 10); + + flg = 1; + for (i = 0; i < 5; i++) + flg &= (read_reg(cd, i + 1) == expect[i]); + + if (verbose) { + printk("%s: Reset (%d) signature = ", cd->name, k); + for (i = 0; i < 5; i++) + printk("%3x", read_reg(cd, i + 1)); + if (!flg) + printk(" (incorrect)"); + printk("\n"); + } + + pi_disconnect(cd->pi); + return flg - 1; +} + +static int pcd_drive_reset(struct cdrom_device_info *cdi) +{ + return pcd_reset(cdi->handle); +} + +static int pcd_ready_wait(struct pcd_unit *cd, int tmo) +{ + char tr_cmd[12] = { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }; + int k, p; + + k = 0; + while (k < tmo) { + cd->last_sense = 0; + pcd_atapi(cd, tr_cmd, 0, NULL, DBMSG("test unit ready")); + p = cd->last_sense; + if (!p) + return 0; + if (!(((p & 0xffff) == 0x0402) || ((p & 0xff) == 6))) + return p; + k++; + pcd_sleep(HZ); + } + return 0x000020; /* timeout */ +} + +static int pcd_drive_status(struct cdrom_device_info *cdi, int slot_nr) +{ + char rc_cmd[12] = { 0x25, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }; + struct pcd_unit *cd = cdi->handle; + + if (pcd_ready_wait(cd, PCD_READY_TMO)) + return CDS_DRIVE_NOT_READY; + if (pcd_atapi(cd, rc_cmd, 8, pcd_scratch, DBMSG("check media"))) + return CDS_NO_DISC; + return CDS_DISC_OK; +} + +static int pcd_identify(struct pcd_unit *cd, char *id) +{ + int k, s; + char id_cmd[12] = { 0x12, 0, 0, 0, 36, 0, 0, 0, 0, 0, 0, 0 }; + + pcd_bufblk = -1; + + s = pcd_atapi(cd, id_cmd, 36, pcd_buffer, "identify"); + + if (s) + return -1; + if ((pcd_buffer[0] & 0x1f) != 5) { + if (verbose) + printk("%s: %s is not a CD-ROM\n", + cd->name, cd->drive ? "Slave" : "Master"); + return -1; + } + memcpy(id, pcd_buffer + 16, 16); + id[16] = 0; + k = 16; + while ((k >= 0) && (id[k] <= 0x20)) { + id[k] = 0; + k--; + } + + printk("%s: %s: %s\n", cd->name, cd->drive ? "Slave" : "Master", id); + + return 0; +} + +/* + * returns 0, with id set if drive is detected + * -1, if drive detection failed + */ +static int pcd_probe(struct pcd_unit *cd, int ms, char *id) +{ + if (ms == -1) { + for (cd->drive = 0; cd->drive <= 1; cd->drive++) + if (!pcd_reset(cd) && !pcd_identify(cd, id)) + return 0; + } else { + cd->drive = ms; + if (!pcd_reset(cd) && !pcd_identify(cd, id)) + return 0; + } + return -1; +} + +static void pcd_probe_capabilities(void) +{ + int unit, r; + char buffer[32]; + char cmd[12] = { 0x5a, 1 << 3, 0x2a, 0, 0, 0, 0, 18, 0, 0, 0, 0 }; + struct pcd_unit *cd; + + for (unit = 0, cd = pcd; unit < PCD_UNITS; unit++, cd++) { + if (!cd->present) + continue; + r = pcd_atapi(cd, cmd, 18, buffer, "mode sense capabilities"); + if (r) + continue; + /* we should now have the cap page */ + if ((buffer[11] & 1) == 0) + cd->info.mask |= CDC_CD_R; + if ((buffer[11] & 2) == 0) + cd->info.mask |= CDC_CD_RW; + if ((buffer[12] & 1) == 0) + cd->info.mask |= CDC_PLAY_AUDIO; + if ((buffer[14] & 1) == 0) + cd->info.mask |= CDC_LOCK; + if ((buffer[14] & 8) == 0) + cd->info.mask |= CDC_OPEN_TRAY; + if ((buffer[14] >> 6) == 0) + cd->info.mask |= CDC_CLOSE_TRAY; + } +} + +static int pcd_detect(void) +{ + char id[18]; + int k, unit; + struct pcd_unit *cd; + + printk("%s: %s version %s, major %d, nice %d\n", + name, name, PCD_VERSION, major, nice); + + par_drv = pi_register_driver(name); + if (!par_drv) { + pr_err("failed to register %s driver\n", name); + return -1; + } + + k = 0; + if (pcd_drive_count == 0) { /* nothing spec'd - so autoprobe for 1 */ + cd = pcd; + if (pi_init(cd->pi, 1, -1, -1, -1, -1, -1, pcd_buffer, + PI_PCD, verbose, cd->name)) { + if (!pcd_probe(cd, -1, id) && cd->disk) { + cd->present = 1; + k++; + } else + pi_release(cd->pi); + } + } else { + for (unit = 0, cd = pcd; unit < PCD_UNITS; unit++, cd++) { + int *conf = *drives[unit]; + if (!conf[D_PRT]) + continue; + if (!pi_init(cd->pi, 0, conf[D_PRT], conf[D_MOD], + conf[D_UNI], conf[D_PRO], conf[D_DLY], + pcd_buffer, PI_PCD, verbose, cd->name)) + continue; + if (!pcd_probe(cd, conf[D_SLV], id) && cd->disk) { + cd->present = 1; + k++; + } else + pi_release(cd->pi); + } + } + if (k) + return 0; + + printk("%s: No CD-ROM drive found\n", name); + for (unit = 0, cd = pcd; unit < PCD_UNITS; unit++, cd++) + put_disk(cd->disk); + pi_unregister_driver(par_drv); + return -1; +} + +/* I/O request processing */ +static int pcd_queue; + +static int set_next_request(void) +{ + struct pcd_unit *cd; + struct request_queue *q; + int old_pos = pcd_queue; + + do { + cd = &pcd[pcd_queue]; + q = cd->present ? cd->disk->queue : NULL; + if (++pcd_queue == PCD_UNITS) + pcd_queue = 0; + if (q) { + pcd_req = blk_fetch_request(q); + if (pcd_req) + break; + } + } while (pcd_queue != old_pos); + + return pcd_req != NULL; +} + +static void pcd_request(void) +{ + if (pcd_busy) + return; + while (1) { + if (!pcd_req && !set_next_request()) + return; + + if (rq_data_dir(pcd_req) == READ) { + struct pcd_unit *cd = pcd_req->rq_disk->private_data; + if (cd != pcd_current) + pcd_bufblk = -1; + pcd_current = cd; + pcd_sector = blk_rq_pos(pcd_req); + pcd_count = blk_rq_cur_sectors(pcd_req); + pcd_buf = bio_data(pcd_req->bio); + pcd_busy = 1; + ps_set_intr(do_pcd_read, NULL, 0, nice); + return; + } else { + __blk_end_request_all(pcd_req, BLK_STS_IOERR); + pcd_req = NULL; + } + } +} + +static void do_pcd_request(struct request_queue *q) +{ + pcd_request(); +} + +static inline void next_request(blk_status_t err) +{ + unsigned long saved_flags; + + spin_lock_irqsave(&pcd_lock, saved_flags); + if (!__blk_end_request_cur(pcd_req, err)) + pcd_req = NULL; + pcd_busy = 0; + pcd_request(); + spin_unlock_irqrestore(&pcd_lock, saved_flags); +} + +static int pcd_ready(void) +{ + return (((status_reg(pcd_current) & (IDE_BUSY | IDE_DRQ)) == IDE_DRQ)); +} + +static void pcd_transfer(void) +{ + + while (pcd_count && (pcd_sector / 4 == pcd_bufblk)) { + int o = (pcd_sector % 4) * 512; + memcpy(pcd_buf, pcd_buffer + o, 512); + pcd_count--; + pcd_buf += 512; + pcd_sector++; + } +} + +static void pcd_start(void) +{ + int b, i; + char rd_cmd[12] = { 0xa8, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 }; + + pcd_bufblk = pcd_sector / 4; + b = pcd_bufblk; + for (i = 0; i < 4; i++) { + rd_cmd[5 - i] = b & 0xff; + b = b >> 8; + } + + if (pcd_command(pcd_current, rd_cmd, 2048, "read block")) { + pcd_bufblk = -1; + next_request(BLK_STS_IOERR); + return; + } + + mdelay(1); + + ps_set_intr(do_pcd_read_drq, pcd_ready, PCD_TMO, nice); +} + +static void do_pcd_read(void) +{ + pcd_busy = 1; + pcd_retries = 0; + pcd_transfer(); + if (!pcd_count) { + next_request(0); + return; + } + + pi_do_claimed(pcd_current->pi, pcd_start); +} + +static void do_pcd_read_drq(void) +{ + unsigned long saved_flags; + + if (pcd_completion(pcd_current, pcd_buffer, "read block")) { + if (pcd_retries < PCD_RETRIES) { + mdelay(1); + pcd_retries++; + pi_do_claimed(pcd_current->pi, pcd_start); + return; + } + pcd_bufblk = -1; + next_request(BLK_STS_IOERR); + return; + } + + do_pcd_read(); + spin_lock_irqsave(&pcd_lock, saved_flags); + pcd_request(); + spin_unlock_irqrestore(&pcd_lock, saved_flags); +} + +/* the audio_ioctl stuff is adapted from sr_ioctl.c */ + +static int pcd_audio_ioctl(struct cdrom_device_info *cdi, unsigned int cmd, void *arg) +{ + struct pcd_unit *cd = cdi->handle; + + switch (cmd) { + + case CDROMREADTOCHDR: + + { + char cmd[12] = + { GPCMD_READ_TOC_PMA_ATIP, 0, 0, 0, 0, 0, 0, 0, 12, + 0, 0, 0 }; + struct cdrom_tochdr *tochdr = + (struct cdrom_tochdr *) arg; + char buffer[32]; + int r; + + r = pcd_atapi(cd, cmd, 12, buffer, "read toc header"); + + tochdr->cdth_trk0 = buffer[2]; + tochdr->cdth_trk1 = buffer[3]; + + return r ? -EIO : 0; + } + + case CDROMREADTOCENTRY: + + { + char cmd[12] = + { GPCMD_READ_TOC_PMA_ATIP, 0, 0, 0, 0, 0, 0, 0, 12, + 0, 0, 0 }; + + struct cdrom_tocentry *tocentry = + (struct cdrom_tocentry *) arg; + unsigned char buffer[32]; + int r; + + cmd[1] = + (tocentry->cdte_format == CDROM_MSF ? 0x02 : 0); + cmd[6] = tocentry->cdte_track; + + r = pcd_atapi(cd, cmd, 12, buffer, "read toc entry"); + + tocentry->cdte_ctrl = buffer[5] & 0xf; + tocentry->cdte_adr = buffer[5] >> 4; + tocentry->cdte_datamode = + (tocentry->cdte_ctrl & 0x04) ? 1 : 0; + if (tocentry->cdte_format == CDROM_MSF) { + tocentry->cdte_addr.msf.minute = buffer[9]; + tocentry->cdte_addr.msf.second = buffer[10]; + tocentry->cdte_addr.msf.frame = buffer[11]; + } else + tocentry->cdte_addr.lba = + (((((buffer[8] << 8) + buffer[9]) << 8) + + buffer[10]) << 8) + buffer[11]; + + return r ? -EIO : 0; + } + + default: + + return -ENOSYS; + } +} + +static int pcd_get_mcn(struct cdrom_device_info *cdi, struct cdrom_mcn *mcn) +{ + char cmd[12] = + { GPCMD_READ_SUBCHANNEL, 0, 0x40, 2, 0, 0, 0, 0, 24, 0, 0, 0 }; + char buffer[32]; + + if (pcd_atapi(cdi->handle, cmd, 24, buffer, "get mcn")) + return -EIO; + + memcpy(mcn->medium_catalog_number, buffer + 9, 13); + mcn->medium_catalog_number[13] = 0; + + return 0; +} + +static int __init pcd_init(void) +{ + struct pcd_unit *cd; + int unit; + + if (disable) + return -EINVAL; + + pcd_init_units(); + + if (pcd_detect()) + return -ENODEV; + + /* get the atapi capabilities page */ + pcd_probe_capabilities(); + + if (register_blkdev(major, name)) { + for (unit = 0, cd = pcd; unit < PCD_UNITS; unit++, cd++) + put_disk(cd->disk); + return -EBUSY; + } + + for (unit = 0, cd = pcd; unit < PCD_UNITS; unit++, cd++) { + if (cd->present) { + register_cdrom(&cd->info); + cd->disk->private_data = cd; + add_disk(cd->disk); + } + } + + return 0; +} + +static void __exit pcd_exit(void) +{ + struct pcd_unit *cd; + int unit; + + for (unit = 0, cd = pcd; unit < PCD_UNITS; unit++, cd++) { + if (cd->present) { + del_gendisk(cd->disk); + pi_release(cd->pi); + unregister_cdrom(&cd->info); + } + blk_cleanup_queue(cd->disk->queue); + put_disk(cd->disk); + } + unregister_blkdev(major, name); + pi_unregister_driver(par_drv); +} + +MODULE_LICENSE("GPL"); +module_init(pcd_init) +module_exit(pcd_exit) diff --git a/drivers/block/paride/pd.c b/drivers/block/paride/pd.c new file mode 100644 index 000000000..7cf947586 --- /dev/null +++ b/drivers/block/paride/pd.c @@ -0,0 +1,983 @@ +/* + pd.c (c) 1997-8 Grant R. Guenther <grant@torque.net> + Under the terms of the GNU General Public License. + + This is the high-level driver for parallel port IDE hard + drives based on chips supported by the paride module. + + By default, the driver will autoprobe for a single parallel + port IDE drive, but if their individual parameters are + specified, the driver can handle up to 4 drives. + + The behaviour of the pd driver can be altered by setting + some parameters from the insmod command line. The following + parameters are adjustable: + + drive0 These four arguments can be arrays of + drive1 1-8 integers as follows: + drive2 + drive3 <prt>,<pro>,<uni>,<mod>,<geo>,<sby>,<dly>,<slv> + + Where, + + <prt> is the base of the parallel port address for + the corresponding drive. (required) + + <pro> is the protocol number for the adapter that + supports this drive. These numbers are + logged by 'paride' when the protocol modules + are initialised. (0 if not given) + + <uni> for those adapters that support chained + devices, this is the unit selector for the + chain of devices on the given port. It should + be zero for devices that don't support chaining. + (0 if not given) + + <mod> this can be -1 to choose the best mode, or one + of the mode numbers supported by the adapter. + (-1 if not given) + + <geo> this defaults to 0 to indicate that the driver + should use the CHS geometry provided by the drive + itself. If set to 1, the driver will provide + a logical geometry with 64 heads and 32 sectors + per track, to be consistent with most SCSI + drivers. (0 if not given) + + <sby> set this to zero to disable the power saving + standby mode, if needed. (1 if not given) + + <dly> some parallel ports require the driver to + go more slowly. -1 sets a default value that + should work with the chosen protocol. Otherwise, + set this to a small integer, the larger it is + the slower the port i/o. In some cases, setting + this to zero will speed up the device. (default -1) + + <slv> IDE disks can be jumpered to master or slave. + Set this to 0 to choose the master drive, 1 to + choose the slave, -1 (the default) to choose the + first drive found. + + + major You may use this parameter to override the + default major number (45) that this driver + will use. Be sure to change the device + name as well. + + name This parameter is a character string that + contains the name the kernel will use for this + device (in /proc output, for instance). + (default "pd") + + cluster The driver will attempt to aggregate requests + for adjacent blocks into larger multi-block + clusters. The maximum cluster size (in 512 + byte sectors) is set with this parameter. + (default 64) + + verbose This parameter controls the amount of logging + that the driver will do. Set it to 0 for + normal operation, 1 to see autoprobe progress + messages, or 2 to see additional debugging + output. (default 0) + + nice This parameter controls the driver's use of + idle CPU time, at the expense of some speed. + + If this driver is built into the kernel, you can use kernel + the following command line parameters, with the same values + as the corresponding module parameters listed above: + + pd.drive0 + pd.drive1 + pd.drive2 + pd.drive3 + pd.cluster + pd.nice + + In addition, you can use the parameter pd.disable to disable + the driver entirely. + +*/ + +/* Changes: + + 1.01 GRG 1997.01.24 Restored pd_reset() + Added eject ioctl + 1.02 GRG 1998.05.06 SMP spinlock changes, + Added slave support + 1.03 GRG 1998.06.16 Eliminate an Ugh. + 1.04 GRG 1998.08.15 Extra debugging, use HZ in loop timing + 1.05 GRG 1998.09.24 Added jumbo support + +*/ + +#define PD_VERSION "1.05" +#define PD_MAJOR 45 +#define PD_NAME "pd" +#define PD_UNITS 4 + +/* Here are things one can override from the insmod command. + Most are autoprobed by paride unless set here. Verbose is off + by default. + +*/ +#include <linux/types.h> + +static int verbose = 0; +static int major = PD_MAJOR; +static char *name = PD_NAME; +static int cluster = 64; +static int nice = 0; +static int disable = 0; + +static int drive0[8] = { 0, 0, 0, -1, 0, 1, -1, -1 }; +static int drive1[8] = { 0, 0, 0, -1, 0, 1, -1, -1 }; +static int drive2[8] = { 0, 0, 0, -1, 0, 1, -1, -1 }; +static int drive3[8] = { 0, 0, 0, -1, 0, 1, -1, -1 }; + +static int (*drives[4])[8] = {&drive0, &drive1, &drive2, &drive3}; + +enum {D_PRT, D_PRO, D_UNI, D_MOD, D_GEO, D_SBY, D_DLY, D_SLV}; + +/* end of parameters */ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/gfp.h> +#include <linux/fs.h> +#include <linux/delay.h> +#include <linux/hdreg.h> +#include <linux/cdrom.h> /* for the eject ioctl */ +#include <linux/blkdev.h> +#include <linux/blkpg.h> +#include <linux/kernel.h> +#include <linux/mutex.h> +#include <linux/uaccess.h> +#include <linux/workqueue.h> + +static DEFINE_MUTEX(pd_mutex); +static DEFINE_SPINLOCK(pd_lock); + +module_param(verbose, int, 0); +module_param(major, int, 0); +module_param(name, charp, 0); +module_param(cluster, int, 0); +module_param(nice, int, 0); +module_param_array(drive0, int, NULL, 0); +module_param_array(drive1, int, NULL, 0); +module_param_array(drive2, int, NULL, 0); +module_param_array(drive3, int, NULL, 0); + +#include "paride.h" + +#define PD_BITS 4 + +/* numbers for "SCSI" geometry */ + +#define PD_LOG_HEADS 64 +#define PD_LOG_SECTS 32 + +#define PD_ID_OFF 54 +#define PD_ID_LEN 14 + +#define PD_MAX_RETRIES 5 +#define PD_TMO 800 /* interrupt timeout in jiffies */ +#define PD_SPIN_DEL 50 /* spin delay in micro-seconds */ + +#define PD_SPIN (1000000*PD_TMO)/(HZ*PD_SPIN_DEL) + +#define STAT_ERR 0x00001 +#define STAT_INDEX 0x00002 +#define STAT_ECC 0x00004 +#define STAT_DRQ 0x00008 +#define STAT_SEEK 0x00010 +#define STAT_WRERR 0x00020 +#define STAT_READY 0x00040 +#define STAT_BUSY 0x00080 + +#define ERR_AMNF 0x00100 +#define ERR_TK0NF 0x00200 +#define ERR_ABRT 0x00400 +#define ERR_MCR 0x00800 +#define ERR_IDNF 0x01000 +#define ERR_MC 0x02000 +#define ERR_UNC 0x04000 +#define ERR_TMO 0x10000 + +#define IDE_READ 0x20 +#define IDE_WRITE 0x30 +#define IDE_READ_VRFY 0x40 +#define IDE_INIT_DEV_PARMS 0x91 +#define IDE_STANDBY 0x96 +#define IDE_ACKCHANGE 0xdb +#define IDE_DOORLOCK 0xde +#define IDE_DOORUNLOCK 0xdf +#define IDE_IDENTIFY 0xec +#define IDE_EJECT 0xed + +#define PD_NAMELEN 8 + +struct pd_unit { + struct pi_adapter pia; /* interface to paride layer */ + struct pi_adapter *pi; + int access; /* count of active opens ... */ + int capacity; /* Size of this volume in sectors */ + int heads; /* physical geometry */ + int sectors; + int cylinders; + int can_lba; + int drive; /* master=0 slave=1 */ + int changed; /* Have we seen a disk change ? */ + int removable; /* removable media device ? */ + int standby; + int alt_geom; + char name[PD_NAMELEN]; /* pda, pdb, etc ... */ + struct gendisk *gd; +}; + +static struct pd_unit pd[PD_UNITS]; + +static char pd_scratch[512]; /* scratch block buffer */ + +static char *pd_errs[17] = { "ERR", "INDEX", "ECC", "DRQ", "SEEK", "WRERR", + "READY", "BUSY", "AMNF", "TK0NF", "ABRT", "MCR", + "IDNF", "MC", "UNC", "???", "TMO" +}; + +static void *par_drv; /* reference of parport driver */ + +static inline int status_reg(struct pd_unit *disk) +{ + return pi_read_regr(disk->pi, 1, 6); +} + +static inline int read_reg(struct pd_unit *disk, int reg) +{ + return pi_read_regr(disk->pi, 0, reg); +} + +static inline void write_status(struct pd_unit *disk, int val) +{ + pi_write_regr(disk->pi, 1, 6, val); +} + +static inline void write_reg(struct pd_unit *disk, int reg, int val) +{ + pi_write_regr(disk->pi, 0, reg, val); +} + +static inline u8 DRIVE(struct pd_unit *disk) +{ + return 0xa0+0x10*disk->drive; +} + +/* ide command interface */ + +static void pd_print_error(struct pd_unit *disk, char *msg, int status) +{ + int i; + + printk("%s: %s: status = 0x%x =", disk->name, msg, status); + for (i = 0; i < ARRAY_SIZE(pd_errs); i++) + if (status & (1 << i)) + printk(" %s", pd_errs[i]); + printk("\n"); +} + +static void pd_reset(struct pd_unit *disk) +{ /* called only for MASTER drive */ + write_status(disk, 4); + udelay(50); + write_status(disk, 0); + udelay(250); +} + +#define DBMSG(msg) ((verbose>1)?(msg):NULL) + +static int pd_wait_for(struct pd_unit *disk, int w, char *msg) +{ /* polled wait */ + int k, r, e; + + k = 0; + while (k < PD_SPIN) { + r = status_reg(disk); + k++; + if (((r & w) == w) && !(r & STAT_BUSY)) + break; + udelay(PD_SPIN_DEL); + } + e = (read_reg(disk, 1) << 8) + read_reg(disk, 7); + if (k >= PD_SPIN) + e |= ERR_TMO; + if ((e & (STAT_ERR | ERR_TMO)) && (msg != NULL)) + pd_print_error(disk, msg, e); + return e; +} + +static void pd_send_command(struct pd_unit *disk, int n, int s, int h, int c0, int c1, int func) +{ + write_reg(disk, 6, DRIVE(disk) + h); + write_reg(disk, 1, 0); /* the IDE task file */ + write_reg(disk, 2, n); + write_reg(disk, 3, s); + write_reg(disk, 4, c0); + write_reg(disk, 5, c1); + write_reg(disk, 7, func); + + udelay(1); +} + +static void pd_ide_command(struct pd_unit *disk, int func, int block, int count) +{ + int c1, c0, h, s; + + if (disk->can_lba) { + s = block & 255; + c0 = (block >>= 8) & 255; + c1 = (block >>= 8) & 255; + h = ((block >>= 8) & 15) + 0x40; + } else { + s = (block % disk->sectors) + 1; + h = (block /= disk->sectors) % disk->heads; + c0 = (block /= disk->heads) % 256; + c1 = (block >>= 8); + } + pd_send_command(disk, count, s, h, c0, c1, func); +} + +/* The i/o request engine */ + +enum action {Fail = 0, Ok = 1, Hold, Wait}; + +static struct request *pd_req; /* current request */ +static enum action (*phase)(void); + +static void run_fsm(void); + +static void ps_tq_int(struct work_struct *work); + +static DECLARE_DELAYED_WORK(fsm_tq, ps_tq_int); + +static void schedule_fsm(void) +{ + if (!nice) + schedule_delayed_work(&fsm_tq, 0); + else + schedule_delayed_work(&fsm_tq, nice-1); +} + +static void ps_tq_int(struct work_struct *work) +{ + run_fsm(); +} + +static enum action do_pd_io_start(void); +static enum action pd_special(void); +static enum action do_pd_read_start(void); +static enum action do_pd_write_start(void); +static enum action do_pd_read_drq(void); +static enum action do_pd_write_done(void); + +static int pd_queue; +static int pd_claimed; + +static struct pd_unit *pd_current; /* current request's drive */ +static PIA *pi_current; /* current request's PIA */ + +static int set_next_request(void) +{ + struct gendisk *disk; + struct request_queue *q; + int old_pos = pd_queue; + + do { + disk = pd[pd_queue].gd; + q = disk ? disk->queue : NULL; + if (++pd_queue == PD_UNITS) + pd_queue = 0; + if (q) { + pd_req = blk_fetch_request(q); + if (pd_req) + break; + } + } while (pd_queue != old_pos); + + return pd_req != NULL; +} + +static void run_fsm(void) +{ + while (1) { + enum action res; + unsigned long saved_flags; + int stop = 0; + + if (!phase) { + pd_current = pd_req->rq_disk->private_data; + pi_current = pd_current->pi; + phase = do_pd_io_start; + } + + switch (pd_claimed) { + case 0: + pd_claimed = 1; + if (!pi_schedule_claimed(pi_current, run_fsm)) + return; + /* fall through */ + case 1: + pd_claimed = 2; + pi_current->proto->connect(pi_current); + } + + switch(res = phase()) { + case Ok: case Fail: + pi_disconnect(pi_current); + pd_claimed = 0; + phase = NULL; + spin_lock_irqsave(&pd_lock, saved_flags); + if (!__blk_end_request_cur(pd_req, + res == Ok ? 0 : BLK_STS_IOERR)) { + if (!set_next_request()) + stop = 1; + } + spin_unlock_irqrestore(&pd_lock, saved_flags); + if (stop) + return; + /* fall through */ + case Hold: + schedule_fsm(); + return; + case Wait: + pi_disconnect(pi_current); + pd_claimed = 0; + } + } +} + +static int pd_retries = 0; /* i/o error retry count */ +static int pd_block; /* address of next requested block */ +static int pd_count; /* number of blocks still to do */ +static int pd_run; /* sectors in current cluster */ +static char *pd_buf; /* buffer for request in progress */ + +static enum action do_pd_io_start(void) +{ + switch (req_op(pd_req)) { + case REQ_OP_DRV_IN: + phase = pd_special; + return pd_special(); + case REQ_OP_READ: + case REQ_OP_WRITE: + pd_block = blk_rq_pos(pd_req); + pd_count = blk_rq_cur_sectors(pd_req); + if (pd_block + pd_count > get_capacity(pd_req->rq_disk)) + return Fail; + pd_run = blk_rq_sectors(pd_req); + pd_buf = bio_data(pd_req->bio); + pd_retries = 0; + if (req_op(pd_req) == REQ_OP_READ) + return do_pd_read_start(); + else + return do_pd_write_start(); + } + return Fail; +} + +static enum action pd_special(void) +{ + enum action (*func)(struct pd_unit *) = pd_req->special; + return func(pd_current); +} + +static int pd_next_buf(void) +{ + unsigned long saved_flags; + + pd_count--; + pd_run--; + pd_buf += 512; + pd_block++; + if (!pd_run) + return 1; + if (pd_count) + return 0; + spin_lock_irqsave(&pd_lock, saved_flags); + __blk_end_request_cur(pd_req, 0); + pd_count = blk_rq_cur_sectors(pd_req); + pd_buf = bio_data(pd_req->bio); + spin_unlock_irqrestore(&pd_lock, saved_flags); + return 0; +} + +static unsigned long pd_timeout; + +static enum action do_pd_read_start(void) +{ + if (pd_wait_for(pd_current, STAT_READY, "do_pd_read") & STAT_ERR) { + if (pd_retries < PD_MAX_RETRIES) { + pd_retries++; + return Wait; + } + return Fail; + } + pd_ide_command(pd_current, IDE_READ, pd_block, pd_run); + phase = do_pd_read_drq; + pd_timeout = jiffies + PD_TMO; + return Hold; +} + +static enum action do_pd_write_start(void) +{ + if (pd_wait_for(pd_current, STAT_READY, "do_pd_write") & STAT_ERR) { + if (pd_retries < PD_MAX_RETRIES) { + pd_retries++; + return Wait; + } + return Fail; + } + pd_ide_command(pd_current, IDE_WRITE, pd_block, pd_run); + while (1) { + if (pd_wait_for(pd_current, STAT_DRQ, "do_pd_write_drq") & STAT_ERR) { + if (pd_retries < PD_MAX_RETRIES) { + pd_retries++; + return Wait; + } + return Fail; + } + pi_write_block(pd_current->pi, pd_buf, 512); + if (pd_next_buf()) + break; + } + phase = do_pd_write_done; + pd_timeout = jiffies + PD_TMO; + return Hold; +} + +static inline int pd_ready(void) +{ + return !(status_reg(pd_current) & STAT_BUSY); +} + +static enum action do_pd_read_drq(void) +{ + if (!pd_ready() && !time_after_eq(jiffies, pd_timeout)) + return Hold; + + while (1) { + if (pd_wait_for(pd_current, STAT_DRQ, "do_pd_read_drq") & STAT_ERR) { + if (pd_retries < PD_MAX_RETRIES) { + pd_retries++; + phase = do_pd_read_start; + return Wait; + } + return Fail; + } + pi_read_block(pd_current->pi, pd_buf, 512); + if (pd_next_buf()) + break; + } + return Ok; +} + +static enum action do_pd_write_done(void) +{ + if (!pd_ready() && !time_after_eq(jiffies, pd_timeout)) + return Hold; + + if (pd_wait_for(pd_current, STAT_READY, "do_pd_write_done") & STAT_ERR) { + if (pd_retries < PD_MAX_RETRIES) { + pd_retries++; + phase = do_pd_write_start; + return Wait; + } + return Fail; + } + return Ok; +} + +/* special io requests */ + +/* According to the ATA standard, the default CHS geometry should be + available following a reset. Some Western Digital drives come up + in a mode where only LBA addresses are accepted until the device + parameters are initialised. +*/ + +static void pd_init_dev_parms(struct pd_unit *disk) +{ + pd_wait_for(disk, 0, DBMSG("before init_dev_parms")); + pd_send_command(disk, disk->sectors, 0, disk->heads - 1, 0, 0, + IDE_INIT_DEV_PARMS); + udelay(300); + pd_wait_for(disk, 0, "Initialise device parameters"); +} + +static enum action pd_door_lock(struct pd_unit *disk) +{ + if (!(pd_wait_for(disk, STAT_READY, "Lock") & STAT_ERR)) { + pd_send_command(disk, 1, 0, 0, 0, 0, IDE_DOORLOCK); + pd_wait_for(disk, STAT_READY, "Lock done"); + } + return Ok; +} + +static enum action pd_door_unlock(struct pd_unit *disk) +{ + if (!(pd_wait_for(disk, STAT_READY, "Lock") & STAT_ERR)) { + pd_send_command(disk, 1, 0, 0, 0, 0, IDE_DOORUNLOCK); + pd_wait_for(disk, STAT_READY, "Lock done"); + } + return Ok; +} + +static enum action pd_eject(struct pd_unit *disk) +{ + pd_wait_for(disk, 0, DBMSG("before unlock on eject")); + pd_send_command(disk, 1, 0, 0, 0, 0, IDE_DOORUNLOCK); + pd_wait_for(disk, 0, DBMSG("after unlock on eject")); + pd_wait_for(disk, 0, DBMSG("before eject")); + pd_send_command(disk, 0, 0, 0, 0, 0, IDE_EJECT); + pd_wait_for(disk, 0, DBMSG("after eject")); + return Ok; +} + +static enum action pd_media_check(struct pd_unit *disk) +{ + int r = pd_wait_for(disk, STAT_READY, DBMSG("before media_check")); + if (!(r & STAT_ERR)) { + pd_send_command(disk, 1, 1, 0, 0, 0, IDE_READ_VRFY); + r = pd_wait_for(disk, STAT_READY, DBMSG("RDY after READ_VRFY")); + } else + disk->changed = 1; /* say changed if other error */ + if (r & ERR_MC) { + disk->changed = 1; + pd_send_command(disk, 1, 0, 0, 0, 0, IDE_ACKCHANGE); + pd_wait_for(disk, STAT_READY, DBMSG("RDY after ACKCHANGE")); + pd_send_command(disk, 1, 1, 0, 0, 0, IDE_READ_VRFY); + r = pd_wait_for(disk, STAT_READY, DBMSG("RDY after VRFY")); + } + return Ok; +} + +static void pd_standby_off(struct pd_unit *disk) +{ + pd_wait_for(disk, 0, DBMSG("before STANDBY")); + pd_send_command(disk, 0, 0, 0, 0, 0, IDE_STANDBY); + pd_wait_for(disk, 0, DBMSG("after STANDBY")); +} + +static enum action pd_identify(struct pd_unit *disk) +{ + int j; + char id[PD_ID_LEN + 1]; + +/* WARNING: here there may be dragons. reset() applies to both drives, + but we call it only on probing the MASTER. This should allow most + common configurations to work, but be warned that a reset can clear + settings on the SLAVE drive. +*/ + + if (disk->drive == 0) + pd_reset(disk); + + write_reg(disk, 6, DRIVE(disk)); + pd_wait_for(disk, 0, DBMSG("before IDENT")); + pd_send_command(disk, 1, 0, 0, 0, 0, IDE_IDENTIFY); + + if (pd_wait_for(disk, STAT_DRQ, DBMSG("IDENT DRQ")) & STAT_ERR) + return Fail; + pi_read_block(disk->pi, pd_scratch, 512); + disk->can_lba = pd_scratch[99] & 2; + disk->sectors = le16_to_cpu(*(__le16 *) (pd_scratch + 12)); + disk->heads = le16_to_cpu(*(__le16 *) (pd_scratch + 6)); + disk->cylinders = le16_to_cpu(*(__le16 *) (pd_scratch + 2)); + if (disk->can_lba) + disk->capacity = le32_to_cpu(*(__le32 *) (pd_scratch + 120)); + else + disk->capacity = disk->sectors * disk->heads * disk->cylinders; + + for (j = 0; j < PD_ID_LEN; j++) + id[j ^ 1] = pd_scratch[j + PD_ID_OFF]; + j = PD_ID_LEN - 1; + while ((j >= 0) && (id[j] <= 0x20)) + j--; + j++; + id[j] = 0; + + disk->removable = pd_scratch[0] & 0x80; + + printk("%s: %s, %s, %d blocks [%dM], (%d/%d/%d), %s media\n", + disk->name, id, + disk->drive ? "slave" : "master", + disk->capacity, disk->capacity / 2048, + disk->cylinders, disk->heads, disk->sectors, + disk->removable ? "removable" : "fixed"); + + if (disk->capacity) + pd_init_dev_parms(disk); + if (!disk->standby) + pd_standby_off(disk); + + return Ok; +} + +/* end of io request engine */ + +static void do_pd_request(struct request_queue * q) +{ + if (pd_req) + return; + pd_req = blk_fetch_request(q); + if (!pd_req) + return; + + schedule_fsm(); +} + +static int pd_special_command(struct pd_unit *disk, + enum action (*func)(struct pd_unit *disk)) +{ + struct request *rq; + + rq = blk_get_request(disk->gd->queue, REQ_OP_DRV_IN, 0); + if (IS_ERR(rq)) + return PTR_ERR(rq); + + rq->special = func; + blk_execute_rq(disk->gd->queue, disk->gd, rq, 0); + blk_put_request(rq); + return 0; +} + +/* kernel glue structures */ + +static int pd_open(struct block_device *bdev, fmode_t mode) +{ + struct pd_unit *disk = bdev->bd_disk->private_data; + + mutex_lock(&pd_mutex); + disk->access++; + + if (disk->removable) { + pd_special_command(disk, pd_media_check); + pd_special_command(disk, pd_door_lock); + } + mutex_unlock(&pd_mutex); + return 0; +} + +static int pd_getgeo(struct block_device *bdev, struct hd_geometry *geo) +{ + struct pd_unit *disk = bdev->bd_disk->private_data; + + if (disk->alt_geom) { + geo->heads = PD_LOG_HEADS; + geo->sectors = PD_LOG_SECTS; + geo->cylinders = disk->capacity / (geo->heads * geo->sectors); + } else { + geo->heads = disk->heads; + geo->sectors = disk->sectors; + geo->cylinders = disk->cylinders; + } + + return 0; +} + +static int pd_ioctl(struct block_device *bdev, fmode_t mode, + unsigned int cmd, unsigned long arg) +{ + struct pd_unit *disk = bdev->bd_disk->private_data; + + switch (cmd) { + case CDROMEJECT: + mutex_lock(&pd_mutex); + if (disk->access == 1) + pd_special_command(disk, pd_eject); + mutex_unlock(&pd_mutex); + return 0; + default: + return -EINVAL; + } +} + +static void pd_release(struct gendisk *p, fmode_t mode) +{ + struct pd_unit *disk = p->private_data; + + mutex_lock(&pd_mutex); + if (!--disk->access && disk->removable) + pd_special_command(disk, pd_door_unlock); + mutex_unlock(&pd_mutex); +} + +static unsigned int pd_check_events(struct gendisk *p, unsigned int clearing) +{ + struct pd_unit *disk = p->private_data; + int r; + if (!disk->removable) + return 0; + pd_special_command(disk, pd_media_check); + r = disk->changed; + disk->changed = 0; + return r ? DISK_EVENT_MEDIA_CHANGE : 0; +} + +static int pd_revalidate(struct gendisk *p) +{ + struct pd_unit *disk = p->private_data; + if (pd_special_command(disk, pd_identify) == 0) + set_capacity(p, disk->capacity); + else + set_capacity(p, 0); + return 0; +} + +static const struct block_device_operations pd_fops = { + .owner = THIS_MODULE, + .open = pd_open, + .release = pd_release, + .ioctl = pd_ioctl, + .getgeo = pd_getgeo, + .check_events = pd_check_events, + .revalidate_disk= pd_revalidate +}; + +/* probing */ + +static void pd_probe_drive(struct pd_unit *disk) +{ + struct gendisk *p = alloc_disk(1 << PD_BITS); + if (!p) + return; + strcpy(p->disk_name, disk->name); + p->fops = &pd_fops; + p->major = major; + p->first_minor = (disk - pd) << PD_BITS; + disk->gd = p; + p->private_data = disk; + p->queue = blk_init_queue(do_pd_request, &pd_lock); + if (!p->queue) { + disk->gd = NULL; + put_disk(p); + return; + } + blk_queue_max_hw_sectors(p->queue, cluster); + blk_queue_bounce_limit(p->queue, BLK_BOUNCE_HIGH); + + if (disk->drive == -1) { + for (disk->drive = 0; disk->drive <= 1; disk->drive++) + if (pd_special_command(disk, pd_identify) == 0) + return; + } else if (pd_special_command(disk, pd_identify) == 0) + return; + disk->gd = NULL; + put_disk(p); +} + +static int pd_detect(void) +{ + int found = 0, unit, pd_drive_count = 0; + struct pd_unit *disk; + + for (unit = 0; unit < PD_UNITS; unit++) { + int *parm = *drives[unit]; + struct pd_unit *disk = pd + unit; + disk->pi = &disk->pia; + disk->access = 0; + disk->changed = 1; + disk->capacity = 0; + disk->drive = parm[D_SLV]; + snprintf(disk->name, PD_NAMELEN, "%s%c", name, 'a'+unit); + disk->alt_geom = parm[D_GEO]; + disk->standby = parm[D_SBY]; + if (parm[D_PRT]) + pd_drive_count++; + } + + par_drv = pi_register_driver(name); + if (!par_drv) { + pr_err("failed to register %s driver\n", name); + return -1; + } + + if (pd_drive_count == 0) { /* nothing spec'd - so autoprobe for 1 */ + disk = pd; + if (pi_init(disk->pi, 1, -1, -1, -1, -1, -1, pd_scratch, + PI_PD, verbose, disk->name)) { + pd_probe_drive(disk); + if (!disk->gd) + pi_release(disk->pi); + } + + } else { + for (unit = 0, disk = pd; unit < PD_UNITS; unit++, disk++) { + int *parm = *drives[unit]; + if (!parm[D_PRT]) + continue; + if (pi_init(disk->pi, 0, parm[D_PRT], parm[D_MOD], + parm[D_UNI], parm[D_PRO], parm[D_DLY], + pd_scratch, PI_PD, verbose, disk->name)) { + pd_probe_drive(disk); + if (!disk->gd) + pi_release(disk->pi); + } + } + } + for (unit = 0, disk = pd; unit < PD_UNITS; unit++, disk++) { + if (disk->gd) { + set_capacity(disk->gd, disk->capacity); + add_disk(disk->gd); + found = 1; + } + } + if (!found) { + printk("%s: no valid drive found\n", name); + pi_unregister_driver(par_drv); + } + return found; +} + +static int __init pd_init(void) +{ + if (disable) + goto out1; + + if (register_blkdev(major, name)) + goto out1; + + printk("%s: %s version %s, major %d, cluster %d, nice %d\n", + name, name, PD_VERSION, major, cluster, nice); + if (!pd_detect()) + goto out2; + + return 0; + +out2: + unregister_blkdev(major, name); +out1: + return -ENODEV; +} + +static void __exit pd_exit(void) +{ + struct pd_unit *disk; + int unit; + unregister_blkdev(major, name); + for (unit = 0, disk = pd; unit < PD_UNITS; unit++, disk++) { + struct gendisk *p = disk->gd; + if (p) { + disk->gd = NULL; + del_gendisk(p); + blk_cleanup_queue(p->queue); + put_disk(p); + pi_release(disk->pi); + } + } +} + +MODULE_LICENSE("GPL"); +module_init(pd_init) +module_exit(pd_exit) diff --git a/drivers/block/paride/pf.c b/drivers/block/paride/pf.c new file mode 100644 index 000000000..eef7a91f6 --- /dev/null +++ b/drivers/block/paride/pf.c @@ -0,0 +1,1034 @@ +/* + pf.c (c) 1997-8 Grant R. Guenther <grant@torque.net> + Under the terms of the GNU General Public License. + + This is the high-level driver for parallel port ATAPI disk + drives based on chips supported by the paride module. + + By default, the driver will autoprobe for a single parallel + port ATAPI disk drive, but if their individual parameters are + specified, the driver can handle up to 4 drives. + + The behaviour of the pf driver can be altered by setting + some parameters from the insmod command line. The following + parameters are adjustable: + + drive0 These four arguments can be arrays of + drive1 1-7 integers as follows: + drive2 + drive3 <prt>,<pro>,<uni>,<mod>,<slv>,<lun>,<dly> + + Where, + + <prt> is the base of the parallel port address for + the corresponding drive. (required) + + <pro> is the protocol number for the adapter that + supports this drive. These numbers are + logged by 'paride' when the protocol modules + are initialised. (0 if not given) + + <uni> for those adapters that support chained + devices, this is the unit selector for the + chain of devices on the given port. It should + be zero for devices that don't support chaining. + (0 if not given) + + <mod> this can be -1 to choose the best mode, or one + of the mode numbers supported by the adapter. + (-1 if not given) + + <slv> ATAPI CDroms can be jumpered to master or slave. + Set this to 0 to choose the master drive, 1 to + choose the slave, -1 (the default) to choose the + first drive found. + + <lun> Some ATAPI devices support multiple LUNs. + One example is the ATAPI PD/CD drive from + Matshita/Panasonic. This device has a + CD drive on LUN 0 and a PD drive on LUN 1. + By default, the driver will search for the + first LUN with a supported device. Set + this parameter to force it to use a specific + LUN. (default -1) + + <dly> some parallel ports require the driver to + go more slowly. -1 sets a default value that + should work with the chosen protocol. Otherwise, + set this to a small integer, the larger it is + the slower the port i/o. In some cases, setting + this to zero will speed up the device. (default -1) + + major You may use this parameter to override the + default major number (47) that this driver + will use. Be sure to change the device + name as well. + + name This parameter is a character string that + contains the name the kernel will use for this + device (in /proc output, for instance). + (default "pf"). + + cluster The driver will attempt to aggregate requests + for adjacent blocks into larger multi-block + clusters. The maximum cluster size (in 512 + byte sectors) is set with this parameter. + (default 64) + + verbose This parameter controls the amount of logging + that the driver will do. Set it to 0 for + normal operation, 1 to see autoprobe progress + messages, or 2 to see additional debugging + output. (default 0) + + nice This parameter controls the driver's use of + idle CPU time, at the expense of some speed. + + If this driver is built into the kernel, you can use the + following command line parameters, with the same values + as the corresponding module parameters listed above: + + pf.drive0 + pf.drive1 + pf.drive2 + pf.drive3 + pf.cluster + pf.nice + + In addition, you can use the parameter pf.disable to disable + the driver entirely. + +*/ + +/* Changes: + + 1.01 GRG 1998.05.03 Changes for SMP. Eliminate sti(). + Fix for drives that don't clear STAT_ERR + until after next CDB delivered. + Small change in pf_completion to round + up transfer size. + 1.02 GRG 1998.06.16 Eliminated an Ugh + 1.03 GRG 1998.08.16 Use HZ in loop timings, extra debugging + 1.04 GRG 1998.09.24 Added jumbo support + +*/ + +#define PF_VERSION "1.04" +#define PF_MAJOR 47 +#define PF_NAME "pf" +#define PF_UNITS 4 + +#include <linux/types.h> + +/* Here are things one can override from the insmod command. + Most are autoprobed by paride unless set here. Verbose is off + by default. + +*/ + +static bool verbose = 0; +static int major = PF_MAJOR; +static char *name = PF_NAME; +static int cluster = 64; +static int nice = 0; +static int disable = 0; + +static int drive0[7] = { 0, 0, 0, -1, -1, -1, -1 }; +static int drive1[7] = { 0, 0, 0, -1, -1, -1, -1 }; +static int drive2[7] = { 0, 0, 0, -1, -1, -1, -1 }; +static int drive3[7] = { 0, 0, 0, -1, -1, -1, -1 }; + +static int (*drives[4])[7] = {&drive0, &drive1, &drive2, &drive3}; +static int pf_drive_count; + +enum {D_PRT, D_PRO, D_UNI, D_MOD, D_SLV, D_LUN, D_DLY}; + +/* end of parameters */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/fs.h> +#include <linux/delay.h> +#include <linux/hdreg.h> +#include <linux/cdrom.h> +#include <linux/spinlock.h> +#include <linux/blkdev.h> +#include <linux/blkpg.h> +#include <linux/mutex.h> +#include <linux/uaccess.h> + +static DEFINE_MUTEX(pf_mutex); +static DEFINE_SPINLOCK(pf_spin_lock); + +module_param(verbose, bool, 0644); +module_param(major, int, 0); +module_param(name, charp, 0); +module_param(cluster, int, 0); +module_param(nice, int, 0); +module_param_array(drive0, int, NULL, 0); +module_param_array(drive1, int, NULL, 0); +module_param_array(drive2, int, NULL, 0); +module_param_array(drive3, int, NULL, 0); + +#include "paride.h" +#include "pseudo.h" + +/* constants for faking geometry numbers */ + +#define PF_FD_MAX 8192 /* use FD geometry under this size */ +#define PF_FD_HDS 2 +#define PF_FD_SPT 18 +#define PF_HD_HDS 64 +#define PF_HD_SPT 32 + +#define PF_MAX_RETRIES 5 +#define PF_TMO 800 /* interrupt timeout in jiffies */ +#define PF_SPIN_DEL 50 /* spin delay in micro-seconds */ + +#define PF_SPIN (1000000*PF_TMO)/(HZ*PF_SPIN_DEL) + +#define STAT_ERR 0x00001 +#define STAT_INDEX 0x00002 +#define STAT_ECC 0x00004 +#define STAT_DRQ 0x00008 +#define STAT_SEEK 0x00010 +#define STAT_WRERR 0x00020 +#define STAT_READY 0x00040 +#define STAT_BUSY 0x00080 + +#define ATAPI_REQ_SENSE 0x03 +#define ATAPI_LOCK 0x1e +#define ATAPI_DOOR 0x1b +#define ATAPI_MODE_SENSE 0x5a +#define ATAPI_CAPACITY 0x25 +#define ATAPI_IDENTIFY 0x12 +#define ATAPI_READ_10 0x28 +#define ATAPI_WRITE_10 0x2a + +static int pf_open(struct block_device *bdev, fmode_t mode); +static void do_pf_request(struct request_queue * q); +static int pf_ioctl(struct block_device *bdev, fmode_t mode, + unsigned int cmd, unsigned long arg); +static int pf_getgeo(struct block_device *bdev, struct hd_geometry *geo); + +static void pf_release(struct gendisk *disk, fmode_t mode); + +static int pf_detect(void); +static void do_pf_read(void); +static void do_pf_read_start(void); +static void do_pf_write(void); +static void do_pf_write_start(void); +static void do_pf_read_drq(void); +static void do_pf_write_done(void); + +#define PF_NM 0 +#define PF_RO 1 +#define PF_RW 2 + +#define PF_NAMELEN 8 + +struct pf_unit { + struct pi_adapter pia; /* interface to paride layer */ + struct pi_adapter *pi; + int removable; /* removable media device ? */ + int media_status; /* media present ? WP ? */ + int drive; /* drive */ + int lun; + int access; /* count of active opens ... */ + int present; /* device present ? */ + char name[PF_NAMELEN]; /* pf0, pf1, ... */ + struct gendisk *disk; +}; + +static struct pf_unit units[PF_UNITS]; + +static int pf_identify(struct pf_unit *pf); +static void pf_lock(struct pf_unit *pf, int func); +static void pf_eject(struct pf_unit *pf); +static unsigned int pf_check_events(struct gendisk *disk, + unsigned int clearing); + +static char pf_scratch[512]; /* scratch block buffer */ + +/* the variables below are used mainly in the I/O request engine, which + processes only one request at a time. +*/ + +static int pf_retries = 0; /* i/o error retry count */ +static int pf_busy = 0; /* request being processed ? */ +static struct request *pf_req; /* current request */ +static int pf_block; /* address of next requested block */ +static int pf_count; /* number of blocks still to do */ +static int pf_run; /* sectors in current cluster */ +static int pf_cmd; /* current command READ/WRITE */ +static struct pf_unit *pf_current;/* unit of current request */ +static int pf_mask; /* stopper for pseudo-int */ +static char *pf_buf; /* buffer for request in progress */ +static void *par_drv; /* reference of parport driver */ + +/* kernel glue structures */ + +static const struct block_device_operations pf_fops = { + .owner = THIS_MODULE, + .open = pf_open, + .release = pf_release, + .ioctl = pf_ioctl, + .getgeo = pf_getgeo, + .check_events = pf_check_events, +}; + +static void __init pf_init_units(void) +{ + struct pf_unit *pf; + int unit; + + pf_drive_count = 0; + for (unit = 0, pf = units; unit < PF_UNITS; unit++, pf++) { + struct gendisk *disk = alloc_disk(1); + if (!disk) + continue; + disk->queue = blk_init_queue(do_pf_request, &pf_spin_lock); + if (!disk->queue) { + put_disk(disk); + return; + } + blk_queue_max_segments(disk->queue, cluster); + blk_queue_bounce_limit(disk->queue, BLK_BOUNCE_HIGH); + pf->disk = disk; + pf->pi = &pf->pia; + pf->media_status = PF_NM; + pf->drive = (*drives[unit])[D_SLV]; + pf->lun = (*drives[unit])[D_LUN]; + snprintf(pf->name, PF_NAMELEN, "%s%d", name, unit); + disk->major = major; + disk->first_minor = unit; + strcpy(disk->disk_name, pf->name); + disk->fops = &pf_fops; + if (!(*drives[unit])[D_PRT]) + pf_drive_count++; + } +} + +static int pf_open(struct block_device *bdev, fmode_t mode) +{ + struct pf_unit *pf = bdev->bd_disk->private_data; + int ret; + + mutex_lock(&pf_mutex); + pf_identify(pf); + + ret = -ENODEV; + if (pf->media_status == PF_NM) + goto out; + + ret = -EROFS; + if ((pf->media_status == PF_RO) && (mode & FMODE_WRITE)) + goto out; + + ret = 0; + pf->access++; + if (pf->removable) + pf_lock(pf, 1); +out: + mutex_unlock(&pf_mutex); + return ret; +} + +static int pf_getgeo(struct block_device *bdev, struct hd_geometry *geo) +{ + struct pf_unit *pf = bdev->bd_disk->private_data; + sector_t capacity = get_capacity(pf->disk); + + if (capacity < PF_FD_MAX) { + geo->cylinders = sector_div(capacity, PF_FD_HDS * PF_FD_SPT); + geo->heads = PF_FD_HDS; + geo->sectors = PF_FD_SPT; + } else { + geo->cylinders = sector_div(capacity, PF_HD_HDS * PF_HD_SPT); + geo->heads = PF_HD_HDS; + geo->sectors = PF_HD_SPT; + } + + return 0; +} + +static int pf_ioctl(struct block_device *bdev, fmode_t mode, unsigned int cmd, unsigned long arg) +{ + struct pf_unit *pf = bdev->bd_disk->private_data; + + if (cmd != CDROMEJECT) + return -EINVAL; + + if (pf->access != 1) + return -EBUSY; + mutex_lock(&pf_mutex); + pf_eject(pf); + mutex_unlock(&pf_mutex); + + return 0; +} + +static void pf_release(struct gendisk *disk, fmode_t mode) +{ + struct pf_unit *pf = disk->private_data; + + mutex_lock(&pf_mutex); + if (pf->access <= 0) { + mutex_unlock(&pf_mutex); + WARN_ON(1); + return; + } + + pf->access--; + + if (!pf->access && pf->removable) + pf_lock(pf, 0); + + mutex_unlock(&pf_mutex); +} + +static unsigned int pf_check_events(struct gendisk *disk, unsigned int clearing) +{ + return DISK_EVENT_MEDIA_CHANGE; +} + +static inline int status_reg(struct pf_unit *pf) +{ + return pi_read_regr(pf->pi, 1, 6); +} + +static inline int read_reg(struct pf_unit *pf, int reg) +{ + return pi_read_regr(pf->pi, 0, reg); +} + +static inline void write_reg(struct pf_unit *pf, int reg, int val) +{ + pi_write_regr(pf->pi, 0, reg, val); +} + +static int pf_wait(struct pf_unit *pf, int go, int stop, char *fun, char *msg) +{ + int j, r, e, s, p; + + j = 0; + while ((((r = status_reg(pf)) & go) || (stop && (!(r & stop)))) + && (j++ < PF_SPIN)) + udelay(PF_SPIN_DEL); + + if ((r & (STAT_ERR & stop)) || (j > PF_SPIN)) { + s = read_reg(pf, 7); + e = read_reg(pf, 1); + p = read_reg(pf, 2); + if (j > PF_SPIN) + e |= 0x100; + if (fun) + printk("%s: %s %s: alt=0x%x stat=0x%x err=0x%x" + " loop=%d phase=%d\n", + pf->name, fun, msg, r, s, e, j, p); + return (e << 8) + s; + } + return 0; +} + +static int pf_command(struct pf_unit *pf, char *cmd, int dlen, char *fun) +{ + pi_connect(pf->pi); + + write_reg(pf, 6, 0xa0+0x10*pf->drive); + + if (pf_wait(pf, STAT_BUSY | STAT_DRQ, 0, fun, "before command")) { + pi_disconnect(pf->pi); + return -1; + } + + write_reg(pf, 4, dlen % 256); + write_reg(pf, 5, dlen / 256); + write_reg(pf, 7, 0xa0); /* ATAPI packet command */ + + if (pf_wait(pf, STAT_BUSY, STAT_DRQ, fun, "command DRQ")) { + pi_disconnect(pf->pi); + return -1; + } + + if (read_reg(pf, 2) != 1) { + printk("%s: %s: command phase error\n", pf->name, fun); + pi_disconnect(pf->pi); + return -1; + } + + pi_write_block(pf->pi, cmd, 12); + + return 0; +} + +static int pf_completion(struct pf_unit *pf, char *buf, char *fun) +{ + int r, s, n; + + r = pf_wait(pf, STAT_BUSY, STAT_DRQ | STAT_READY | STAT_ERR, + fun, "completion"); + + if ((read_reg(pf, 2) & 2) && (read_reg(pf, 7) & STAT_DRQ)) { + n = (((read_reg(pf, 4) + 256 * read_reg(pf, 5)) + + 3) & 0xfffc); + pi_read_block(pf->pi, buf, n); + } + + s = pf_wait(pf, STAT_BUSY, STAT_READY | STAT_ERR, fun, "data done"); + + pi_disconnect(pf->pi); + + return (r ? r : s); +} + +static void pf_req_sense(struct pf_unit *pf, int quiet) +{ + char rs_cmd[12] = + { ATAPI_REQ_SENSE, pf->lun << 5, 0, 0, 16, 0, 0, 0, 0, 0, 0, 0 }; + char buf[16]; + int r; + + r = pf_command(pf, rs_cmd, 16, "Request sense"); + mdelay(1); + if (!r) + pf_completion(pf, buf, "Request sense"); + + if ((!r) && (!quiet)) + printk("%s: Sense key: %x, ASC: %x, ASQ: %x\n", + pf->name, buf[2] & 0xf, buf[12], buf[13]); +} + +static int pf_atapi(struct pf_unit *pf, char *cmd, int dlen, char *buf, char *fun) +{ + int r; + + r = pf_command(pf, cmd, dlen, fun); + mdelay(1); + if (!r) + r = pf_completion(pf, buf, fun); + if (r) + pf_req_sense(pf, !fun); + + return r; +} + +static void pf_lock(struct pf_unit *pf, int func) +{ + char lo_cmd[12] = { ATAPI_LOCK, pf->lun << 5, 0, 0, func, 0, 0, 0, 0, 0, 0, 0 }; + + pf_atapi(pf, lo_cmd, 0, pf_scratch, func ? "lock" : "unlock"); +} + +static void pf_eject(struct pf_unit *pf) +{ + char ej_cmd[12] = { ATAPI_DOOR, pf->lun << 5, 0, 0, 2, 0, 0, 0, 0, 0, 0, 0 }; + + pf_lock(pf, 0); + pf_atapi(pf, ej_cmd, 0, pf_scratch, "eject"); +} + +#define PF_RESET_TMO 30 /* in tenths of a second */ + +static void pf_sleep(int cs) +{ + schedule_timeout_interruptible(cs); +} + +/* the ATAPI standard actually specifies the contents of all 7 registers + after a reset, but the specification is ambiguous concerning the last + two bytes, and different drives interpret the standard differently. + */ + +static int pf_reset(struct pf_unit *pf) +{ + int i, k, flg; + int expect[5] = { 1, 1, 1, 0x14, 0xeb }; + + pi_connect(pf->pi); + write_reg(pf, 6, 0xa0+0x10*pf->drive); + write_reg(pf, 7, 8); + + pf_sleep(20 * HZ / 1000); + + k = 0; + while ((k++ < PF_RESET_TMO) && (status_reg(pf) & STAT_BUSY)) + pf_sleep(HZ / 10); + + flg = 1; + for (i = 0; i < 5; i++) + flg &= (read_reg(pf, i + 1) == expect[i]); + + if (verbose) { + printk("%s: Reset (%d) signature = ", pf->name, k); + for (i = 0; i < 5; i++) + printk("%3x", read_reg(pf, i + 1)); + if (!flg) + printk(" (incorrect)"); + printk("\n"); + } + + pi_disconnect(pf->pi); + return flg - 1; +} + +static void pf_mode_sense(struct pf_unit *pf) +{ + char ms_cmd[12] = + { ATAPI_MODE_SENSE, pf->lun << 5, 0, 0, 0, 0, 0, 0, 8, 0, 0, 0 }; + char buf[8]; + + pf_atapi(pf, ms_cmd, 8, buf, "mode sense"); + pf->media_status = PF_RW; + if (buf[3] & 0x80) + pf->media_status = PF_RO; +} + +static void xs(char *buf, char *targ, int offs, int len) +{ + int j, k, l; + + j = 0; + l = 0; + for (k = 0; k < len; k++) + if ((buf[k + offs] != 0x20) || (buf[k + offs] != l)) + l = targ[j++] = buf[k + offs]; + if (l == 0x20) + j--; + targ[j] = 0; +} + +static int xl(char *buf, int offs) +{ + int v, k; + + v = 0; + for (k = 0; k < 4; k++) + v = v * 256 + (buf[k + offs] & 0xff); + return v; +} + +static void pf_get_capacity(struct pf_unit *pf) +{ + char rc_cmd[12] = { ATAPI_CAPACITY, pf->lun << 5, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }; + char buf[8]; + int bs; + + if (pf_atapi(pf, rc_cmd, 8, buf, "get capacity")) { + pf->media_status = PF_NM; + return; + } + set_capacity(pf->disk, xl(buf, 0) + 1); + bs = xl(buf, 4); + if (bs != 512) { + set_capacity(pf->disk, 0); + if (verbose) + printk("%s: Drive %d, LUN %d," + " unsupported block size %d\n", + pf->name, pf->drive, pf->lun, bs); + } +} + +static int pf_identify(struct pf_unit *pf) +{ + int dt, s; + char *ms[2] = { "master", "slave" }; + char mf[10], id[18]; + char id_cmd[12] = + { ATAPI_IDENTIFY, pf->lun << 5, 0, 0, 36, 0, 0, 0, 0, 0, 0, 0 }; + char buf[36]; + + s = pf_atapi(pf, id_cmd, 36, buf, "identify"); + if (s) + return -1; + + dt = buf[0] & 0x1f; + if ((dt != 0) && (dt != 7)) { + if (verbose) + printk("%s: Drive %d, LUN %d, unsupported type %d\n", + pf->name, pf->drive, pf->lun, dt); + return -1; + } + + xs(buf, mf, 8, 8); + xs(buf, id, 16, 16); + + pf->removable = (buf[1] & 0x80); + + pf_mode_sense(pf); + pf_mode_sense(pf); + pf_mode_sense(pf); + + pf_get_capacity(pf); + + printk("%s: %s %s, %s LUN %d, type %d", + pf->name, mf, id, ms[pf->drive], pf->lun, dt); + if (pf->removable) + printk(", removable"); + if (pf->media_status == PF_NM) + printk(", no media\n"); + else { + if (pf->media_status == PF_RO) + printk(", RO"); + printk(", %llu blocks\n", + (unsigned long long)get_capacity(pf->disk)); + } + return 0; +} + +/* returns 0, with id set if drive is detected + -1, if drive detection failed +*/ +static int pf_probe(struct pf_unit *pf) +{ + if (pf->drive == -1) { + for (pf->drive = 0; pf->drive <= 1; pf->drive++) + if (!pf_reset(pf)) { + if (pf->lun != -1) + return pf_identify(pf); + else + for (pf->lun = 0; pf->lun < 8; pf->lun++) + if (!pf_identify(pf)) + return 0; + } + } else { + if (pf_reset(pf)) + return -1; + if (pf->lun != -1) + return pf_identify(pf); + for (pf->lun = 0; pf->lun < 8; pf->lun++) + if (!pf_identify(pf)) + return 0; + } + return -1; +} + +static int pf_detect(void) +{ + struct pf_unit *pf = units; + int k, unit; + + printk("%s: %s version %s, major %d, cluster %d, nice %d\n", + name, name, PF_VERSION, major, cluster, nice); + + par_drv = pi_register_driver(name); + if (!par_drv) { + pr_err("failed to register %s driver\n", name); + return -1; + } + k = 0; + if (pf_drive_count == 0) { + if (pi_init(pf->pi, 1, -1, -1, -1, -1, -1, pf_scratch, PI_PF, + verbose, pf->name)) { + if (!pf_probe(pf) && pf->disk) { + pf->present = 1; + k++; + } else + pi_release(pf->pi); + } + + } else + for (unit = 0; unit < PF_UNITS; unit++, pf++) { + int *conf = *drives[unit]; + if (!conf[D_PRT]) + continue; + if (pi_init(pf->pi, 0, conf[D_PRT], conf[D_MOD], + conf[D_UNI], conf[D_PRO], conf[D_DLY], + pf_scratch, PI_PF, verbose, pf->name)) { + if (pf->disk && !pf_probe(pf)) { + pf->present = 1; + k++; + } else + pi_release(pf->pi); + } + } + if (k) + return 0; + + printk("%s: No ATAPI disk detected\n", name); + for (pf = units, unit = 0; unit < PF_UNITS; pf++, unit++) + put_disk(pf->disk); + pi_unregister_driver(par_drv); + return -1; +} + +/* The i/o request engine */ + +static int pf_start(struct pf_unit *pf, int cmd, int b, int c) +{ + int i; + char io_cmd[12] = { cmd, pf->lun << 5, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }; + + for (i = 0; i < 4; i++) { + io_cmd[5 - i] = b & 0xff; + b = b >> 8; + } + + io_cmd[8] = c & 0xff; + io_cmd[7] = (c >> 8) & 0xff; + + i = pf_command(pf, io_cmd, c * 512, "start i/o"); + + mdelay(1); + + return i; +} + +static int pf_ready(void) +{ + return (((status_reg(pf_current) & (STAT_BUSY | pf_mask)) == pf_mask)); +} + +static int pf_queue; + +static int set_next_request(void) +{ + struct pf_unit *pf; + struct request_queue *q; + int old_pos = pf_queue; + + do { + pf = &units[pf_queue]; + q = pf->present ? pf->disk->queue : NULL; + if (++pf_queue == PF_UNITS) + pf_queue = 0; + if (q) { + pf_req = blk_fetch_request(q); + if (pf_req) + break; + } + } while (pf_queue != old_pos); + + return pf_req != NULL; +} + +static void pf_end_request(blk_status_t err) +{ + if (pf_req && !__blk_end_request_cur(pf_req, err)) + pf_req = NULL; +} + +static void pf_request(void) +{ + if (pf_busy) + return; +repeat: + if (!pf_req && !set_next_request()) + return; + + pf_current = pf_req->rq_disk->private_data; + pf_block = blk_rq_pos(pf_req); + pf_run = blk_rq_sectors(pf_req); + pf_count = blk_rq_cur_sectors(pf_req); + + if (pf_block + pf_count > get_capacity(pf_req->rq_disk)) { + pf_end_request(BLK_STS_IOERR); + goto repeat; + } + + pf_cmd = rq_data_dir(pf_req); + pf_buf = bio_data(pf_req->bio); + pf_retries = 0; + + pf_busy = 1; + if (pf_cmd == READ) + pi_do_claimed(pf_current->pi, do_pf_read); + else if (pf_cmd == WRITE) + pi_do_claimed(pf_current->pi, do_pf_write); + else { + pf_busy = 0; + pf_end_request(BLK_STS_IOERR); + goto repeat; + } +} + +static void do_pf_request(struct request_queue *q) +{ + pf_request(); +} + +static int pf_next_buf(void) +{ + unsigned long saved_flags; + + pf_count--; + pf_run--; + pf_buf += 512; + pf_block++; + if (!pf_run) + return 1; + if (!pf_count) { + spin_lock_irqsave(&pf_spin_lock, saved_flags); + pf_end_request(0); + spin_unlock_irqrestore(&pf_spin_lock, saved_flags); + if (!pf_req) + return 1; + pf_count = blk_rq_cur_sectors(pf_req); + pf_buf = bio_data(pf_req->bio); + } + return 0; +} + +static inline void next_request(blk_status_t err) +{ + unsigned long saved_flags; + + spin_lock_irqsave(&pf_spin_lock, saved_flags); + pf_end_request(err); + pf_busy = 0; + pf_request(); + spin_unlock_irqrestore(&pf_spin_lock, saved_flags); +} + +/* detach from the calling context - in case the spinlock is held */ +static void do_pf_read(void) +{ + ps_set_intr(do_pf_read_start, NULL, 0, nice); +} + +static void do_pf_read_start(void) +{ + pf_busy = 1; + + if (pf_start(pf_current, ATAPI_READ_10, pf_block, pf_run)) { + pi_disconnect(pf_current->pi); + if (pf_retries < PF_MAX_RETRIES) { + pf_retries++; + pi_do_claimed(pf_current->pi, do_pf_read_start); + return; + } + next_request(BLK_STS_IOERR); + return; + } + pf_mask = STAT_DRQ; + ps_set_intr(do_pf_read_drq, pf_ready, PF_TMO, nice); +} + +static void do_pf_read_drq(void) +{ + while (1) { + if (pf_wait(pf_current, STAT_BUSY, STAT_DRQ | STAT_ERR, + "read block", "completion") & STAT_ERR) { + pi_disconnect(pf_current->pi); + if (pf_retries < PF_MAX_RETRIES) { + pf_req_sense(pf_current, 0); + pf_retries++; + pi_do_claimed(pf_current->pi, do_pf_read_start); + return; + } + next_request(BLK_STS_IOERR); + return; + } + pi_read_block(pf_current->pi, pf_buf, 512); + if (pf_next_buf()) + break; + } + pi_disconnect(pf_current->pi); + next_request(0); +} + +static void do_pf_write(void) +{ + ps_set_intr(do_pf_write_start, NULL, 0, nice); +} + +static void do_pf_write_start(void) +{ + pf_busy = 1; + + if (pf_start(pf_current, ATAPI_WRITE_10, pf_block, pf_run)) { + pi_disconnect(pf_current->pi); + if (pf_retries < PF_MAX_RETRIES) { + pf_retries++; + pi_do_claimed(pf_current->pi, do_pf_write_start); + return; + } + next_request(BLK_STS_IOERR); + return; + } + + while (1) { + if (pf_wait(pf_current, STAT_BUSY, STAT_DRQ | STAT_ERR, + "write block", "data wait") & STAT_ERR) { + pi_disconnect(pf_current->pi); + if (pf_retries < PF_MAX_RETRIES) { + pf_retries++; + pi_do_claimed(pf_current->pi, do_pf_write_start); + return; + } + next_request(BLK_STS_IOERR); + return; + } + pi_write_block(pf_current->pi, pf_buf, 512); + if (pf_next_buf()) + break; + } + pf_mask = 0; + ps_set_intr(do_pf_write_done, pf_ready, PF_TMO, nice); +} + +static void do_pf_write_done(void) +{ + if (pf_wait(pf_current, STAT_BUSY, 0, "write block", "done") & STAT_ERR) { + pi_disconnect(pf_current->pi); + if (pf_retries < PF_MAX_RETRIES) { + pf_retries++; + pi_do_claimed(pf_current->pi, do_pf_write_start); + return; + } + next_request(BLK_STS_IOERR); + return; + } + pi_disconnect(pf_current->pi); + next_request(0); +} + +static int __init pf_init(void) +{ /* preliminary initialisation */ + struct pf_unit *pf; + int unit; + + if (disable) + return -EINVAL; + + pf_init_units(); + + if (pf_detect()) + return -ENODEV; + pf_busy = 0; + + if (register_blkdev(major, name)) { + for (pf = units, unit = 0; unit < PF_UNITS; pf++, unit++) + put_disk(pf->disk); + return -EBUSY; + } + + for (pf = units, unit = 0; unit < PF_UNITS; pf++, unit++) { + struct gendisk *disk = pf->disk; + + if (!pf->present) + continue; + disk->private_data = pf; + add_disk(disk); + } + return 0; +} + +static void __exit pf_exit(void) +{ + struct pf_unit *pf; + int unit; + unregister_blkdev(major, name); + for (pf = units, unit = 0; unit < PF_UNITS; pf++, unit++) { + if (!pf->present) + continue; + del_gendisk(pf->disk); + blk_cleanup_queue(pf->disk->queue); + put_disk(pf->disk); + pi_release(pf->pi); + } +} + +MODULE_LICENSE("GPL"); +module_init(pf_init) +module_exit(pf_exit) diff --git a/drivers/block/paride/pg.c b/drivers/block/paride/pg.c new file mode 100644 index 000000000..3b5882bfb --- /dev/null +++ b/drivers/block/paride/pg.c @@ -0,0 +1,734 @@ +/* + pg.c (c) 1998 Grant R. Guenther <grant@torque.net> + Under the terms of the GNU General Public License. + + The pg driver provides a simple character device interface for + sending ATAPI commands to a device. With the exception of the + ATAPI reset operation, all operations are performed by a pair + of read and write operations to the appropriate /dev/pgN device. + A write operation delivers a command and any outbound data in + a single buffer. Normally, the write will succeed unless the + device is offline or malfunctioning, or there is already another + command pending. If the write succeeds, it should be followed + immediately by a read operation, to obtain any returned data and + status information. A read will fail if there is no operation + in progress. + + As a special case, the device can be reset with a write operation, + and in this case, no following read is expected, or permitted. + + There are no ioctl() operations. Any single operation + may transfer at most PG_MAX_DATA bytes. Note that the driver must + copy the data through an internal buffer. In keeping with all + current ATAPI devices, command packets are assumed to be exactly + 12 bytes in length. + + To permit future changes to this interface, the headers in the + read and write buffers contain a single character "magic" flag. + Currently this flag must be the character "P". + + By default, the driver will autoprobe for a single parallel + port ATAPI device, but if their individual parameters are + specified, the driver can handle up to 4 devices. + + To use this device, you must have the following device + special files defined: + + /dev/pg0 c 97 0 + /dev/pg1 c 97 1 + /dev/pg2 c 97 2 + /dev/pg3 c 97 3 + + (You'll need to change the 97 to something else if you use + the 'major' parameter to install the driver on a different + major number.) + + The behaviour of the pg driver can be altered by setting + some parameters from the insmod command line. The following + parameters are adjustable: + + drive0 These four arguments can be arrays of + drive1 1-6 integers as follows: + drive2 + drive3 <prt>,<pro>,<uni>,<mod>,<slv>,<dly> + + Where, + + <prt> is the base of the parallel port address for + the corresponding drive. (required) + + <pro> is the protocol number for the adapter that + supports this drive. These numbers are + logged by 'paride' when the protocol modules + are initialised. (0 if not given) + + <uni> for those adapters that support chained + devices, this is the unit selector for the + chain of devices on the given port. It should + be zero for devices that don't support chaining. + (0 if not given) + + <mod> this can be -1 to choose the best mode, or one + of the mode numbers supported by the adapter. + (-1 if not given) + + <slv> ATAPI devices can be jumpered to master or slave. + Set this to 0 to choose the master drive, 1 to + choose the slave, -1 (the default) to choose the + first drive found. + + <dly> some parallel ports require the driver to + go more slowly. -1 sets a default value that + should work with the chosen protocol. Otherwise, + set this to a small integer, the larger it is + the slower the port i/o. In some cases, setting + this to zero will speed up the device. (default -1) + + major You may use this parameter to override the + default major number (97) that this driver + will use. Be sure to change the device + name as well. + + name This parameter is a character string that + contains the name the kernel will use for this + device (in /proc output, for instance). + (default "pg"). + + verbose This parameter controls the amount of logging + that is done by the driver. Set it to 0 for + quiet operation, to 1 to enable progress + messages while the driver probes for devices, + or to 2 for full debug logging. (default 0) + + If this driver is built into the kernel, you can use + the following command line parameters, with the same values + as the corresponding module parameters listed above: + + pg.drive0 + pg.drive1 + pg.drive2 + pg.drive3 + + In addition, you can use the parameter pg.disable to disable + the driver entirely. + +*/ + +/* Changes: + + 1.01 GRG 1998.06.16 Bug fixes + 1.02 GRG 1998.09.24 Added jumbo support + +*/ + +#define PG_VERSION "1.02" +#define PG_MAJOR 97 +#define PG_NAME "pg" +#define PG_UNITS 4 + +#ifndef PI_PG +#define PI_PG 4 +#endif + +#include <linux/types.h> +/* Here are things one can override from the insmod command. + Most are autoprobed by paride unless set here. Verbose is 0 + by default. + +*/ + +static int verbose; +static int major = PG_MAJOR; +static char *name = PG_NAME; +static int disable = 0; + +static int drive0[6] = { 0, 0, 0, -1, -1, -1 }; +static int drive1[6] = { 0, 0, 0, -1, -1, -1 }; +static int drive2[6] = { 0, 0, 0, -1, -1, -1 }; +static int drive3[6] = { 0, 0, 0, -1, -1, -1 }; + +static int (*drives[4])[6] = {&drive0, &drive1, &drive2, &drive3}; +static int pg_drive_count; + +enum {D_PRT, D_PRO, D_UNI, D_MOD, D_SLV, D_DLY}; + +/* end of parameters */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/fs.h> +#include <linux/delay.h> +#include <linux/slab.h> +#include <linux/mtio.h> +#include <linux/pg.h> +#include <linux/device.h> +#include <linux/sched.h> /* current, TASK_* */ +#include <linux/mutex.h> +#include <linux/jiffies.h> + +#include <linux/uaccess.h> + +module_param(verbose, int, 0644); +module_param(major, int, 0); +module_param(name, charp, 0); +module_param_array(drive0, int, NULL, 0); +module_param_array(drive1, int, NULL, 0); +module_param_array(drive2, int, NULL, 0); +module_param_array(drive3, int, NULL, 0); + +#include "paride.h" + +#define PG_SPIN_DEL 50 /* spin delay in micro-seconds */ +#define PG_SPIN 200 +#define PG_TMO HZ +#define PG_RESET_TMO 10*HZ + +#define STAT_ERR 0x01 +#define STAT_INDEX 0x02 +#define STAT_ECC 0x04 +#define STAT_DRQ 0x08 +#define STAT_SEEK 0x10 +#define STAT_WRERR 0x20 +#define STAT_READY 0x40 +#define STAT_BUSY 0x80 + +#define ATAPI_IDENTIFY 0x12 + +static DEFINE_MUTEX(pg_mutex); +static int pg_open(struct inode *inode, struct file *file); +static int pg_release(struct inode *inode, struct file *file); +static ssize_t pg_read(struct file *filp, char __user *buf, + size_t count, loff_t * ppos); +static ssize_t pg_write(struct file *filp, const char __user *buf, + size_t count, loff_t * ppos); +static int pg_detect(void); + +#define PG_NAMELEN 8 + +struct pg { + struct pi_adapter pia; /* interface to paride layer */ + struct pi_adapter *pi; + int busy; /* write done, read expected */ + int start; /* jiffies at command start */ + int dlen; /* transfer size requested */ + unsigned long timeout; /* timeout requested */ + int status; /* last sense key */ + int drive; /* drive */ + unsigned long access; /* count of active opens ... */ + int present; /* device present ? */ + char *bufptr; + char name[PG_NAMELEN]; /* pg0, pg1, ... */ +}; + +static struct pg devices[PG_UNITS]; + +static int pg_identify(struct pg *dev, int log); + +static char pg_scratch[512]; /* scratch block buffer */ + +static struct class *pg_class; +static void *par_drv; /* reference of parport driver */ + +/* kernel glue structures */ + +static const struct file_operations pg_fops = { + .owner = THIS_MODULE, + .read = pg_read, + .write = pg_write, + .open = pg_open, + .release = pg_release, + .llseek = noop_llseek, +}; + +static void pg_init_units(void) +{ + int unit; + + pg_drive_count = 0; + for (unit = 0; unit < PG_UNITS; unit++) { + int *parm = *drives[unit]; + struct pg *dev = &devices[unit]; + dev->pi = &dev->pia; + clear_bit(0, &dev->access); + dev->busy = 0; + dev->present = 0; + dev->bufptr = NULL; + dev->drive = parm[D_SLV]; + snprintf(dev->name, PG_NAMELEN, "%s%c", name, 'a'+unit); + if (parm[D_PRT]) + pg_drive_count++; + } +} + +static inline int status_reg(struct pg *dev) +{ + return pi_read_regr(dev->pi, 1, 6); +} + +static inline int read_reg(struct pg *dev, int reg) +{ + return pi_read_regr(dev->pi, 0, reg); +} + +static inline void write_reg(struct pg *dev, int reg, int val) +{ + pi_write_regr(dev->pi, 0, reg, val); +} + +static inline u8 DRIVE(struct pg *dev) +{ + return 0xa0+0x10*dev->drive; +} + +static void pg_sleep(int cs) +{ + schedule_timeout_interruptible(cs); +} + +static int pg_wait(struct pg *dev, int go, int stop, unsigned long tmo, char *msg) +{ + int j, r, e, s, p, to; + + dev->status = 0; + + j = 0; + while ((((r = status_reg(dev)) & go) || (stop && (!(r & stop)))) + && time_before(jiffies, tmo)) { + if (j++ < PG_SPIN) + udelay(PG_SPIN_DEL); + else + pg_sleep(1); + } + + to = time_after_eq(jiffies, tmo); + + if ((r & (STAT_ERR & stop)) || to) { + s = read_reg(dev, 7); + e = read_reg(dev, 1); + p = read_reg(dev, 2); + if (verbose > 1) + printk("%s: %s: stat=0x%x err=0x%x phase=%d%s\n", + dev->name, msg, s, e, p, to ? " timeout" : ""); + if (to) + e |= 0x100; + dev->status = (e >> 4) & 0xff; + return -1; + } + return 0; +} + +static int pg_command(struct pg *dev, char *cmd, int dlen, unsigned long tmo) +{ + int k; + + pi_connect(dev->pi); + + write_reg(dev, 6, DRIVE(dev)); + + if (pg_wait(dev, STAT_BUSY | STAT_DRQ, 0, tmo, "before command")) + goto fail; + + write_reg(dev, 4, dlen % 256); + write_reg(dev, 5, dlen / 256); + write_reg(dev, 7, 0xa0); /* ATAPI packet command */ + + if (pg_wait(dev, STAT_BUSY, STAT_DRQ, tmo, "command DRQ")) + goto fail; + + if (read_reg(dev, 2) != 1) { + printk("%s: command phase error\n", dev->name); + goto fail; + } + + pi_write_block(dev->pi, cmd, 12); + + if (verbose > 1) { + printk("%s: Command sent, dlen=%d packet= ", dev->name, dlen); + for (k = 0; k < 12; k++) + printk("%02x ", cmd[k] & 0xff); + printk("\n"); + } + return 0; +fail: + pi_disconnect(dev->pi); + return -1; +} + +static int pg_completion(struct pg *dev, char *buf, unsigned long tmo) +{ + int r, d, n, p; + + r = pg_wait(dev, STAT_BUSY, STAT_DRQ | STAT_READY | STAT_ERR, + tmo, "completion"); + + dev->dlen = 0; + + while (read_reg(dev, 7) & STAT_DRQ) { + d = (read_reg(dev, 4) + 256 * read_reg(dev, 5)); + n = ((d + 3) & 0xfffc); + p = read_reg(dev, 2) & 3; + if (p == 0) + pi_write_block(dev->pi, buf, n); + if (p == 2) + pi_read_block(dev->pi, buf, n); + if (verbose > 1) + printk("%s: %s %d bytes\n", dev->name, + p ? "Read" : "Write", n); + dev->dlen += (1 - p) * d; + buf += d; + r = pg_wait(dev, STAT_BUSY, STAT_DRQ | STAT_READY | STAT_ERR, + tmo, "completion"); + } + + pi_disconnect(dev->pi); + + return r; +} + +static int pg_reset(struct pg *dev) +{ + int i, k, err; + int expect[5] = { 1, 1, 1, 0x14, 0xeb }; + int got[5]; + + pi_connect(dev->pi); + write_reg(dev, 6, DRIVE(dev)); + write_reg(dev, 7, 8); + + pg_sleep(20 * HZ / 1000); + + k = 0; + while ((k++ < PG_RESET_TMO) && (status_reg(dev) & STAT_BUSY)) + pg_sleep(1); + + for (i = 0; i < 5; i++) + got[i] = read_reg(dev, i + 1); + + err = memcmp(expect, got, sizeof(got)) ? -1 : 0; + + if (verbose) { + printk("%s: Reset (%d) signature = ", dev->name, k); + for (i = 0; i < 5; i++) + printk("%3x", got[i]); + if (err) + printk(" (incorrect)"); + printk("\n"); + } + + pi_disconnect(dev->pi); + return err; +} + +static void xs(char *buf, char *targ, int len) +{ + char l = '\0'; + int k; + + for (k = 0; k < len; k++) { + char c = *buf++; + if (c != ' ' && c != l) + l = *targ++ = c; + } + if (l == ' ') + targ--; + *targ = '\0'; +} + +static int pg_identify(struct pg *dev, int log) +{ + int s; + char *ms[2] = { "master", "slave" }; + char mf[10], id[18]; + char id_cmd[12] = { ATAPI_IDENTIFY, 0, 0, 0, 36, 0, 0, 0, 0, 0, 0, 0 }; + char buf[36]; + + s = pg_command(dev, id_cmd, 36, jiffies + PG_TMO); + if (s) + return -1; + s = pg_completion(dev, buf, jiffies + PG_TMO); + if (s) + return -1; + + if (log) { + xs(buf + 8, mf, 8); + xs(buf + 16, id, 16); + printk("%s: %s %s, %s\n", dev->name, mf, id, ms[dev->drive]); + } + + return 0; +} + +/* + * returns 0, with id set if drive is detected + * -1, if drive detection failed + */ +static int pg_probe(struct pg *dev) +{ + if (dev->drive == -1) { + for (dev->drive = 0; dev->drive <= 1; dev->drive++) + if (!pg_reset(dev)) + return pg_identify(dev, 1); + } else { + if (!pg_reset(dev)) + return pg_identify(dev, 1); + } + return -1; +} + +static int pg_detect(void) +{ + struct pg *dev = &devices[0]; + int k, unit; + + printk("%s: %s version %s, major %d\n", name, name, PG_VERSION, major); + + par_drv = pi_register_driver(name); + if (!par_drv) { + pr_err("failed to register %s driver\n", name); + return -1; + } + + k = 0; + if (pg_drive_count == 0) { + if (pi_init(dev->pi, 1, -1, -1, -1, -1, -1, pg_scratch, + PI_PG, verbose, dev->name)) { + if (!pg_probe(dev)) { + dev->present = 1; + k++; + } else + pi_release(dev->pi); + } + + } else + for (unit = 0; unit < PG_UNITS; unit++, dev++) { + int *parm = *drives[unit]; + if (!parm[D_PRT]) + continue; + if (pi_init(dev->pi, 0, parm[D_PRT], parm[D_MOD], + parm[D_UNI], parm[D_PRO], parm[D_DLY], + pg_scratch, PI_PG, verbose, dev->name)) { + if (!pg_probe(dev)) { + dev->present = 1; + k++; + } else + pi_release(dev->pi); + } + } + + if (k) + return 0; + + pi_unregister_driver(par_drv); + printk("%s: No ATAPI device detected\n", name); + return -1; +} + +static int pg_open(struct inode *inode, struct file *file) +{ + int unit = iminor(inode) & 0x7f; + struct pg *dev = &devices[unit]; + int ret = 0; + + mutex_lock(&pg_mutex); + if ((unit >= PG_UNITS) || (!dev->present)) { + ret = -ENODEV; + goto out; + } + + if (test_and_set_bit(0, &dev->access)) { + ret = -EBUSY; + goto out; + } + + if (dev->busy) { + pg_reset(dev); + dev->busy = 0; + } + + pg_identify(dev, (verbose > 1)); + + dev->bufptr = kmalloc(PG_MAX_DATA, GFP_KERNEL); + if (dev->bufptr == NULL) { + clear_bit(0, &dev->access); + printk("%s: buffer allocation failed\n", dev->name); + ret = -ENOMEM; + goto out; + } + + file->private_data = dev; + +out: + mutex_unlock(&pg_mutex); + return ret; +} + +static int pg_release(struct inode *inode, struct file *file) +{ + struct pg *dev = file->private_data; + + kfree(dev->bufptr); + dev->bufptr = NULL; + clear_bit(0, &dev->access); + + return 0; +} + +static ssize_t pg_write(struct file *filp, const char __user *buf, size_t count, loff_t *ppos) +{ + struct pg *dev = filp->private_data; + struct pg_write_hdr hdr; + int hs = sizeof (hdr); + + if (dev->busy) + return -EBUSY; + if (count < hs) + return -EINVAL; + + if (copy_from_user(&hdr, buf, hs)) + return -EFAULT; + + if (hdr.magic != PG_MAGIC) + return -EINVAL; + if (hdr.dlen < 0 || hdr.dlen > PG_MAX_DATA) + return -EINVAL; + if ((count - hs) > PG_MAX_DATA) + return -EINVAL; + + if (hdr.func == PG_RESET) { + if (count != hs) + return -EINVAL; + if (pg_reset(dev)) + return -EIO; + return count; + } + + if (hdr.func != PG_COMMAND) + return -EINVAL; + + dev->start = jiffies; + dev->timeout = hdr.timeout * HZ + HZ / 2 + jiffies; + + if (pg_command(dev, hdr.packet, hdr.dlen, jiffies + PG_TMO)) { + if (dev->status & 0x10) + return -ETIME; + return -EIO; + } + + dev->busy = 1; + + if (copy_from_user(dev->bufptr, buf + hs, count - hs)) + return -EFAULT; + return count; +} + +static ssize_t pg_read(struct file *filp, char __user *buf, size_t count, loff_t *ppos) +{ + struct pg *dev = filp->private_data; + struct pg_read_hdr hdr; + int hs = sizeof (hdr); + int copy; + + if (!dev->busy) + return -EINVAL; + if (count < hs) + return -EINVAL; + + dev->busy = 0; + + if (pg_completion(dev, dev->bufptr, dev->timeout)) + if (dev->status & 0x10) + return -ETIME; + + memset(&hdr, 0, sizeof(hdr)); + hdr.magic = PG_MAGIC; + hdr.dlen = dev->dlen; + copy = 0; + + if (hdr.dlen < 0) { + hdr.dlen = -1 * hdr.dlen; + copy = hdr.dlen; + if (copy > (count - hs)) + copy = count - hs; + } + + hdr.duration = (jiffies - dev->start + HZ / 2) / HZ; + hdr.scsi = dev->status & 0x0f; + + if (copy_to_user(buf, &hdr, hs)) + return -EFAULT; + if (copy > 0) + if (copy_to_user(buf + hs, dev->bufptr, copy)) + return -EFAULT; + return copy + hs; +} + +static int __init pg_init(void) +{ + int unit; + int err; + + if (disable){ + err = -EINVAL; + goto out; + } + + pg_init_units(); + + if (pg_detect()) { + err = -ENODEV; + goto out; + } + + err = register_chrdev(major, name, &pg_fops); + if (err < 0) { + printk("pg_init: unable to get major number %d\n", major); + for (unit = 0; unit < PG_UNITS; unit++) { + struct pg *dev = &devices[unit]; + if (dev->present) + pi_release(dev->pi); + } + goto out; + } + major = err; /* In case the user specified `major=0' (dynamic) */ + pg_class = class_create(THIS_MODULE, "pg"); + if (IS_ERR(pg_class)) { + err = PTR_ERR(pg_class); + goto out_chrdev; + } + for (unit = 0; unit < PG_UNITS; unit++) { + struct pg *dev = &devices[unit]; + if (dev->present) + device_create(pg_class, NULL, MKDEV(major, unit), NULL, + "pg%u", unit); + } + err = 0; + goto out; + +out_chrdev: + unregister_chrdev(major, "pg"); +out: + return err; +} + +static void __exit pg_exit(void) +{ + int unit; + + for (unit = 0; unit < PG_UNITS; unit++) { + struct pg *dev = &devices[unit]; + if (dev->present) + device_destroy(pg_class, MKDEV(major, unit)); + } + class_destroy(pg_class); + unregister_chrdev(major, name); + + for (unit = 0; unit < PG_UNITS; unit++) { + struct pg *dev = &devices[unit]; + if (dev->present) + pi_release(dev->pi); + } +} + +MODULE_LICENSE("GPL"); +module_init(pg_init) +module_exit(pg_exit) diff --git a/drivers/block/paride/ppc6lnx.c b/drivers/block/paride/ppc6lnx.c new file mode 100644 index 000000000..5e5521d3b --- /dev/null +++ b/drivers/block/paride/ppc6lnx.c @@ -0,0 +1,726 @@ +/* + ppc6lnx.c (c) 2001 Micro Solutions Inc. + Released under the terms of the GNU General Public license + + ppc6lnx.c is a par of the protocol driver for the Micro Solutions + "BACKPACK" parallel port IDE adapter + (Works on Series 6 drives) + +*/ + +//*************************************************************************** + +// PPC 6 Code in C sanitized for LINUX +// Original x86 ASM by Ron, Converted to C by Clive + +//*************************************************************************** + + +#define port_stb 1 +#define port_afd 2 +#define cmd_stb port_afd +#define port_init 4 +#define data_stb port_init +#define port_sel 8 +#define port_int 16 +#define port_dir 0x20 + +#define ECR_EPP 0x80 +#define ECR_BI 0x20 + +//*************************************************************************** + +// 60772 Commands + +#define ACCESS_REG 0x00 +#define ACCESS_PORT 0x40 + +#define ACCESS_READ 0x00 +#define ACCESS_WRITE 0x20 + +// 60772 Command Prefix + +#define CMD_PREFIX_SET 0xe0 // Special command that modifies the next command's operation +#define CMD_PREFIX_RESET 0xc0 // Resets current cmd modifier reg bits + #define PREFIX_IO16 0x01 // perform 16-bit wide I/O + #define PREFIX_FASTWR 0x04 // enable PPC mode fast-write + #define PREFIX_BLK 0x08 // enable block transfer mode + +// 60772 Registers + +#define REG_STATUS 0x00 // status register + #define STATUS_IRQA 0x01 // Peripheral IRQA line + #define STATUS_EEPROM_DO 0x40 // Serial EEPROM data bit +#define REG_VERSION 0x01 // PPC version register (read) +#define REG_HWCFG 0x02 // Hardware Config register +#define REG_RAMSIZE 0x03 // Size of RAM Buffer + #define RAMSIZE_128K 0x02 +#define REG_EEPROM 0x06 // EEPROM control register + #define EEPROM_SK 0x01 // eeprom SK bit + #define EEPROM_DI 0x02 // eeprom DI bit + #define EEPROM_CS 0x04 // eeprom CS bit + #define EEPROM_EN 0x08 // eeprom output enable +#define REG_BLKSIZE 0x08 // Block transfer len (24 bit) + +//*************************************************************************** + +typedef struct ppc_storage { + u16 lpt_addr; // LPT base address + u8 ppc_id; + u8 mode; // operating mode + // 0 = PPC Uni SW + // 1 = PPC Uni FW + // 2 = PPC Bi SW + // 3 = PPC Bi FW + // 4 = EPP Byte + // 5 = EPP Word + // 6 = EPP Dword + u8 ppc_flags; + u8 org_data; // original LPT data port contents + u8 org_ctrl; // original LPT control port contents + u8 cur_ctrl; // current control port contents +} Interface; + +//*************************************************************************** + +// ppc_flags + +#define fifo_wait 0x10 + +//*************************************************************************** + +// DONT CHANGE THESE LEST YOU BREAK EVERYTHING - BIT FIELD DEPENDENCIES + +#define PPCMODE_UNI_SW 0 +#define PPCMODE_UNI_FW 1 +#define PPCMODE_BI_SW 2 +#define PPCMODE_BI_FW 3 +#define PPCMODE_EPP_BYTE 4 +#define PPCMODE_EPP_WORD 5 +#define PPCMODE_EPP_DWORD 6 + +//*************************************************************************** + +static int ppc6_select(Interface *ppc); +static void ppc6_deselect(Interface *ppc); +static void ppc6_send_cmd(Interface *ppc, u8 cmd); +static void ppc6_wr_data_byte(Interface *ppc, u8 data); +static u8 ppc6_rd_data_byte(Interface *ppc); +static u8 ppc6_rd_port(Interface *ppc, u8 port); +static void ppc6_wr_port(Interface *ppc, u8 port, u8 data); +static void ppc6_rd_data_blk(Interface *ppc, u8 *data, long count); +static void ppc6_wait_for_fifo(Interface *ppc); +static void ppc6_wr_data_blk(Interface *ppc, u8 *data, long count); +static void ppc6_rd_port16_blk(Interface *ppc, u8 port, u8 *data, long length); +static void ppc6_wr_port16_blk(Interface *ppc, u8 port, u8 *data, long length); +static void ppc6_wr_extout(Interface *ppc, u8 regdata); +static int ppc6_open(Interface *ppc); +static void ppc6_close(Interface *ppc); + +//*************************************************************************** + +static int ppc6_select(Interface *ppc) +{ + u8 i, j, k; + + i = inb(ppc->lpt_addr + 1); + + if (i & 1) + outb(i, ppc->lpt_addr + 1); + + ppc->org_data = inb(ppc->lpt_addr); + + ppc->org_ctrl = inb(ppc->lpt_addr + 2) & 0x5F; // readback ctrl + + ppc->cur_ctrl = ppc->org_ctrl; + + ppc->cur_ctrl |= port_sel; + + outb(ppc->cur_ctrl, ppc->lpt_addr + 2); + + if (ppc->org_data == 'b') + outb('x', ppc->lpt_addr); + + outb('b', ppc->lpt_addr); + outb('p', ppc->lpt_addr); + outb(ppc->ppc_id, ppc->lpt_addr); + outb(~ppc->ppc_id,ppc->lpt_addr); + + ppc->cur_ctrl &= ~port_sel; + + outb(ppc->cur_ctrl, ppc->lpt_addr + 2); + + ppc->cur_ctrl = (ppc->cur_ctrl & port_int) | port_init; + + outb(ppc->cur_ctrl, ppc->lpt_addr + 2); + + i = ppc->mode & 0x0C; + + if (i == 0) + i = (ppc->mode & 2) | 1; + + outb(i, ppc->lpt_addr); + + ppc->cur_ctrl |= port_sel; + + outb(ppc->cur_ctrl, ppc->lpt_addr + 2); + + // DELAY + + ppc->cur_ctrl |= port_afd; + + outb(ppc->cur_ctrl, ppc->lpt_addr + 2); + + j = ((i & 0x08) << 4) | ((i & 0x07) << 3); + + k = inb(ppc->lpt_addr + 1) & 0xB8; + + if (j == k) + { + ppc->cur_ctrl &= ~port_afd; + + outb(ppc->cur_ctrl, ppc->lpt_addr + 2); + + k = (inb(ppc->lpt_addr + 1) & 0xB8) ^ 0xB8; + + if (j == k) + { + if (i & 4) // EPP + ppc->cur_ctrl &= ~(port_sel | port_init); + else // PPC/ECP + ppc->cur_ctrl &= ~port_sel; + + outb(ppc->cur_ctrl, ppc->lpt_addr + 2); + + return(1); + } + } + + outb(ppc->org_ctrl, ppc->lpt_addr + 2); + + outb(ppc->org_data, ppc->lpt_addr); + + return(0); // FAIL +} + +//*************************************************************************** + +static void ppc6_deselect(Interface *ppc) +{ + if (ppc->mode & 4) // EPP + ppc->cur_ctrl |= port_init; + else // PPC/ECP + ppc->cur_ctrl |= port_sel; + + outb(ppc->cur_ctrl, ppc->lpt_addr + 2); + + outb(ppc->org_data, ppc->lpt_addr); + + outb((ppc->org_ctrl | port_sel), ppc->lpt_addr + 2); + + outb(ppc->org_ctrl, ppc->lpt_addr + 2); +} + +//*************************************************************************** + +static void ppc6_send_cmd(Interface *ppc, u8 cmd) +{ + switch(ppc->mode) + { + case PPCMODE_UNI_SW : + case PPCMODE_UNI_FW : + case PPCMODE_BI_SW : + case PPCMODE_BI_FW : + { + outb(cmd, ppc->lpt_addr); + + ppc->cur_ctrl ^= cmd_stb; + + outb(ppc->cur_ctrl, ppc->lpt_addr + 2); + + break; + } + + case PPCMODE_EPP_BYTE : + case PPCMODE_EPP_WORD : + case PPCMODE_EPP_DWORD : + { + outb(cmd, ppc->lpt_addr + 3); + + break; + } + } +} + +//*************************************************************************** + +static void ppc6_wr_data_byte(Interface *ppc, u8 data) +{ + switch(ppc->mode) + { + case PPCMODE_UNI_SW : + case PPCMODE_UNI_FW : + case PPCMODE_BI_SW : + case PPCMODE_BI_FW : + { + outb(data, ppc->lpt_addr); + + ppc->cur_ctrl ^= data_stb; + + outb(ppc->cur_ctrl, ppc->lpt_addr + 2); + + break; + } + + case PPCMODE_EPP_BYTE : + case PPCMODE_EPP_WORD : + case PPCMODE_EPP_DWORD : + { + outb(data, ppc->lpt_addr + 4); + + break; + } + } +} + +//*************************************************************************** + +static u8 ppc6_rd_data_byte(Interface *ppc) +{ + u8 data = 0; + + switch(ppc->mode) + { + case PPCMODE_UNI_SW : + case PPCMODE_UNI_FW : + { + ppc->cur_ctrl = (ppc->cur_ctrl & ~port_stb) ^ data_stb; + + outb(ppc->cur_ctrl, ppc->lpt_addr + 2); + + // DELAY + + data = inb(ppc->lpt_addr + 1); + + data = ((data & 0x80) >> 1) | ((data & 0x38) >> 3); + + ppc->cur_ctrl |= port_stb; + + outb(ppc->cur_ctrl, ppc->lpt_addr + 2); + + // DELAY + + data |= inb(ppc->lpt_addr + 1) & 0xB8; + + break; + } + + case PPCMODE_BI_SW : + case PPCMODE_BI_FW : + { + ppc->cur_ctrl |= port_dir; + + outb(ppc->cur_ctrl, ppc->lpt_addr + 2); + + ppc->cur_ctrl = (ppc->cur_ctrl | port_stb) ^ data_stb; + + outb(ppc->cur_ctrl, ppc->lpt_addr + 2); + + data = inb(ppc->lpt_addr); + + ppc->cur_ctrl &= ~port_stb; + + outb(ppc->cur_ctrl,ppc->lpt_addr + 2); + + ppc->cur_ctrl &= ~port_dir; + + outb(ppc->cur_ctrl, ppc->lpt_addr + 2); + + break; + } + + case PPCMODE_EPP_BYTE : + case PPCMODE_EPP_WORD : + case PPCMODE_EPP_DWORD : + { + outb((ppc->cur_ctrl | port_dir),ppc->lpt_addr + 2); + + data = inb(ppc->lpt_addr + 4); + + outb(ppc->cur_ctrl,ppc->lpt_addr + 2); + + break; + } + } + + return(data); +} + +//*************************************************************************** + +static u8 ppc6_rd_port(Interface *ppc, u8 port) +{ + ppc6_send_cmd(ppc,(u8)(port | ACCESS_PORT | ACCESS_READ)); + + return(ppc6_rd_data_byte(ppc)); +} + +//*************************************************************************** + +static void ppc6_wr_port(Interface *ppc, u8 port, u8 data) +{ + ppc6_send_cmd(ppc,(u8)(port | ACCESS_PORT | ACCESS_WRITE)); + + ppc6_wr_data_byte(ppc, data); +} + +//*************************************************************************** + +static void ppc6_rd_data_blk(Interface *ppc, u8 *data, long count) +{ + switch(ppc->mode) + { + case PPCMODE_UNI_SW : + case PPCMODE_UNI_FW : + { + while(count) + { + u8 d; + + ppc->cur_ctrl = (ppc->cur_ctrl & ~port_stb) ^ data_stb; + + outb(ppc->cur_ctrl, ppc->lpt_addr + 2); + + // DELAY + + d = inb(ppc->lpt_addr + 1); + + d = ((d & 0x80) >> 1) | ((d & 0x38) >> 3); + + ppc->cur_ctrl |= port_stb; + + outb(ppc->cur_ctrl, ppc->lpt_addr + 2); + + // DELAY + + d |= inb(ppc->lpt_addr + 1) & 0xB8; + + *data++ = d; + count--; + } + + break; + } + + case PPCMODE_BI_SW : + case PPCMODE_BI_FW : + { + ppc->cur_ctrl |= port_dir; + + outb(ppc->cur_ctrl, ppc->lpt_addr + 2); + + ppc->cur_ctrl |= port_stb; + + while(count) + { + ppc->cur_ctrl ^= data_stb; + + outb(ppc->cur_ctrl, ppc->lpt_addr + 2); + + *data++ = inb(ppc->lpt_addr); + count--; + } + + ppc->cur_ctrl &= ~port_stb; + + outb(ppc->cur_ctrl, ppc->lpt_addr + 2); + + ppc->cur_ctrl &= ~port_dir; + + outb(ppc->cur_ctrl, ppc->lpt_addr + 2); + + break; + } + + case PPCMODE_EPP_BYTE : + { + outb((ppc->cur_ctrl | port_dir), ppc->lpt_addr + 2); + + // DELAY + + while(count) + { + *data++ = inb(ppc->lpt_addr + 4); + count--; + } + + outb(ppc->cur_ctrl, ppc->lpt_addr + 2); + + break; + } + + case PPCMODE_EPP_WORD : + { + outb((ppc->cur_ctrl | port_dir), ppc->lpt_addr + 2); + + // DELAY + + while(count > 1) + { + *((u16 *)data) = inw(ppc->lpt_addr + 4); + data += 2; + count -= 2; + } + + while(count) + { + *data++ = inb(ppc->lpt_addr + 4); + count--; + } + + outb(ppc->cur_ctrl, ppc->lpt_addr + 2); + + break; + } + + case PPCMODE_EPP_DWORD : + { + outb((ppc->cur_ctrl | port_dir),ppc->lpt_addr + 2); + + // DELAY + + while(count > 3) + { + *((u32 *)data) = inl(ppc->lpt_addr + 4); + data += 4; + count -= 4; + } + + while(count) + { + *data++ = inb(ppc->lpt_addr + 4); + count--; + } + + outb(ppc->cur_ctrl, ppc->lpt_addr + 2); + + break; + } + } + +} + +//*************************************************************************** + +static void ppc6_wait_for_fifo(Interface *ppc) +{ + int i; + + if (ppc->ppc_flags & fifo_wait) + { + for(i=0; i<20; i++) + inb(ppc->lpt_addr + 1); + } +} + +//*************************************************************************** + +static void ppc6_wr_data_blk(Interface *ppc, u8 *data, long count) +{ + switch(ppc->mode) + { + case PPCMODE_UNI_SW : + case PPCMODE_BI_SW : + { + while(count--) + { + outb(*data++, ppc->lpt_addr); + + ppc->cur_ctrl ^= data_stb; + + outb(ppc->cur_ctrl, ppc->lpt_addr + 2); + } + + break; + } + + case PPCMODE_UNI_FW : + case PPCMODE_BI_FW : + { + u8 this, last; + + ppc6_send_cmd(ppc,(CMD_PREFIX_SET | PREFIX_FASTWR)); + + ppc->cur_ctrl |= port_stb; + + outb(ppc->cur_ctrl, ppc->lpt_addr + 2); + + last = *data; + + outb(last, ppc->lpt_addr); + + while(count) + { + this = *data++; + count--; + + if (this == last) + { + ppc->cur_ctrl ^= data_stb; + + outb(ppc->cur_ctrl, ppc->lpt_addr + 2); + } + else + { + outb(this, ppc->lpt_addr); + + last = this; + } + } + + ppc->cur_ctrl &= ~port_stb; + + outb(ppc->cur_ctrl, ppc->lpt_addr + 2); + + ppc6_send_cmd(ppc,(CMD_PREFIX_RESET | PREFIX_FASTWR)); + + break; + } + + case PPCMODE_EPP_BYTE : + { + while(count) + { + outb(*data++,ppc->lpt_addr + 4); + count--; + } + + ppc6_wait_for_fifo(ppc); + + break; + } + + case PPCMODE_EPP_WORD : + { + while(count > 1) + { + outw(*((u16 *)data),ppc->lpt_addr + 4); + data += 2; + count -= 2; + } + + while(count) + { + outb(*data++,ppc->lpt_addr + 4); + count--; + } + + ppc6_wait_for_fifo(ppc); + + break; + } + + case PPCMODE_EPP_DWORD : + { + while(count > 3) + { + outl(*((u32 *)data),ppc->lpt_addr + 4); + data += 4; + count -= 4; + } + + while(count) + { + outb(*data++,ppc->lpt_addr + 4); + count--; + } + + ppc6_wait_for_fifo(ppc); + + break; + } + } +} + +//*************************************************************************** + +static void ppc6_rd_port16_blk(Interface *ppc, u8 port, u8 *data, long length) +{ + length = length << 1; + + ppc6_send_cmd(ppc, (REG_BLKSIZE | ACCESS_REG | ACCESS_WRITE)); + ppc6_wr_data_byte(ppc,(u8)length); + ppc6_wr_data_byte(ppc,(u8)(length >> 8)); + ppc6_wr_data_byte(ppc,0); + + ppc6_send_cmd(ppc, (CMD_PREFIX_SET | PREFIX_IO16 | PREFIX_BLK)); + + ppc6_send_cmd(ppc, (u8)(port | ACCESS_PORT | ACCESS_READ)); + + ppc6_rd_data_blk(ppc, data, length); + + ppc6_send_cmd(ppc, (CMD_PREFIX_RESET | PREFIX_IO16 | PREFIX_BLK)); +} + +//*************************************************************************** + +static void ppc6_wr_port16_blk(Interface *ppc, u8 port, u8 *data, long length) +{ + length = length << 1; + + ppc6_send_cmd(ppc, (REG_BLKSIZE | ACCESS_REG | ACCESS_WRITE)); + ppc6_wr_data_byte(ppc,(u8)length); + ppc6_wr_data_byte(ppc,(u8)(length >> 8)); + ppc6_wr_data_byte(ppc,0); + + ppc6_send_cmd(ppc, (CMD_PREFIX_SET | PREFIX_IO16 | PREFIX_BLK)); + + ppc6_send_cmd(ppc, (u8)(port | ACCESS_PORT | ACCESS_WRITE)); + + ppc6_wr_data_blk(ppc, data, length); + + ppc6_send_cmd(ppc, (CMD_PREFIX_RESET | PREFIX_IO16 | PREFIX_BLK)); +} + +//*************************************************************************** + +static void ppc6_wr_extout(Interface *ppc, u8 regdata) +{ + ppc6_send_cmd(ppc,(REG_VERSION | ACCESS_REG | ACCESS_WRITE)); + + ppc6_wr_data_byte(ppc, (u8)((regdata & 0x03) << 6)); +} + +//*************************************************************************** + +static int ppc6_open(Interface *ppc) +{ + int ret; + + ret = ppc6_select(ppc); + + if (ret == 0) + return(ret); + + ppc->ppc_flags &= ~fifo_wait; + + ppc6_send_cmd(ppc, (ACCESS_REG | ACCESS_WRITE | REG_RAMSIZE)); + ppc6_wr_data_byte(ppc, RAMSIZE_128K); + + ppc6_send_cmd(ppc, (ACCESS_REG | ACCESS_READ | REG_VERSION)); + + if ((ppc6_rd_data_byte(ppc) & 0x3F) == 0x0C) + ppc->ppc_flags |= fifo_wait; + + return(ret); +} + +//*************************************************************************** + +static void ppc6_close(Interface *ppc) +{ + ppc6_deselect(ppc); +} + +//*************************************************************************** + diff --git a/drivers/block/paride/pseudo.h b/drivers/block/paride/pseudo.h new file mode 100644 index 000000000..bc3703294 --- /dev/null +++ b/drivers/block/paride/pseudo.h @@ -0,0 +1,102 @@ +/* + pseudo.h (c) 1997-8 Grant R. Guenther <grant@torque.net> + Under the terms of the GNU General Public License. + + This is the "pseudo-interrupt" logic for parallel port drivers. + + This module is #included into each driver. It makes one + function available: + + ps_set_intr( void (*continuation)(void), + int (*ready)(void), + int timeout, + int nice ) + + Which will arrange for ready() to be evaluated frequently and + when either it returns true, or timeout jiffies have passed, + continuation() will be invoked. + + If nice is 1, the test will done approximately once a + jiffy. If nice is 0, the test will also be done whenever + the scheduler runs (by adding it to a task queue). If + nice is greater than 1, the test will be done once every + (nice-1) jiffies. + +*/ + +/* Changes: + + 1.01 1998.05.03 Switched from cli()/sti() to spinlocks + 1.02 1998.12.14 Added support for nice > 1 +*/ + +#define PS_VERSION "1.02" + +#include <linux/sched.h> +#include <linux/workqueue.h> + +static void ps_tq_int(struct work_struct *work); + +static void (* ps_continuation)(void); +static int (* ps_ready)(void); +static unsigned long ps_timeout; +static int ps_tq_active = 0; +static int ps_nice = 0; + +static DEFINE_SPINLOCK(ps_spinlock __attribute__((unused))); + +static DECLARE_DELAYED_WORK(ps_tq, ps_tq_int); + +static void ps_set_intr(void (*continuation)(void), + int (*ready)(void), + int timeout, int nice) +{ + unsigned long flags; + + spin_lock_irqsave(&ps_spinlock,flags); + + ps_continuation = continuation; + ps_ready = ready; + ps_timeout = jiffies + timeout; + ps_nice = nice; + + if (!ps_tq_active) { + ps_tq_active = 1; + if (!ps_nice) + schedule_delayed_work(&ps_tq, 0); + else + schedule_delayed_work(&ps_tq, ps_nice-1); + } + spin_unlock_irqrestore(&ps_spinlock,flags); +} + +static void ps_tq_int(struct work_struct *work) +{ + void (*con)(void); + unsigned long flags; + + spin_lock_irqsave(&ps_spinlock,flags); + + con = ps_continuation; + ps_tq_active = 0; + + if (!con) { + spin_unlock_irqrestore(&ps_spinlock,flags); + return; + } + if (!ps_ready || ps_ready() || time_after_eq(jiffies, ps_timeout)) { + ps_continuation = NULL; + spin_unlock_irqrestore(&ps_spinlock,flags); + con(); + return; + } + ps_tq_active = 1; + if (!ps_nice) + schedule_delayed_work(&ps_tq, 0); + else + schedule_delayed_work(&ps_tq, ps_nice-1); + spin_unlock_irqrestore(&ps_spinlock,flags); +} + +/* end of pseudo.h */ + diff --git a/drivers/block/paride/pt.c b/drivers/block/paride/pt.c new file mode 100644 index 000000000..e815312a0 --- /dev/null +++ b/drivers/block/paride/pt.c @@ -0,0 +1,1024 @@ +/* + pt.c (c) 1998 Grant R. Guenther <grant@torque.net> + Under the terms of the GNU General Public License. + + This is the high-level driver for parallel port ATAPI tape + drives based on chips supported by the paride module. + + The driver implements both rewinding and non-rewinding + devices, filemarks, and the rewind ioctl. It allocates + a small internal "bounce buffer" for each open device, but + otherwise expects buffering and blocking to be done at the + user level. As with most block-structured tapes, short + writes are padded to full tape blocks, so reading back a file + may return more data than was actually written. + + By default, the driver will autoprobe for a single parallel + port ATAPI tape drive, but if their individual parameters are + specified, the driver can handle up to 4 drives. + + The rewinding devices are named /dev/pt0, /dev/pt1, ... + while the non-rewinding devices are /dev/npt0, /dev/npt1, etc. + + The behaviour of the pt driver can be altered by setting + some parameters from the insmod command line. The following + parameters are adjustable: + + drive0 These four arguments can be arrays of + drive1 1-6 integers as follows: + drive2 + drive3 <prt>,<pro>,<uni>,<mod>,<slv>,<dly> + + Where, + + <prt> is the base of the parallel port address for + the corresponding drive. (required) + + <pro> is the protocol number for the adapter that + supports this drive. These numbers are + logged by 'paride' when the protocol modules + are initialised. (0 if not given) + + <uni> for those adapters that support chained + devices, this is the unit selector for the + chain of devices on the given port. It should + be zero for devices that don't support chaining. + (0 if not given) + + <mod> this can be -1 to choose the best mode, or one + of the mode numbers supported by the adapter. + (-1 if not given) + + <slv> ATAPI devices can be jumpered to master or slave. + Set this to 0 to choose the master drive, 1 to + choose the slave, -1 (the default) to choose the + first drive found. + + <dly> some parallel ports require the driver to + go more slowly. -1 sets a default value that + should work with the chosen protocol. Otherwise, + set this to a small integer, the larger it is + the slower the port i/o. In some cases, setting + this to zero will speed up the device. (default -1) + + major You may use this parameter to override the + default major number (96) that this driver + will use. Be sure to change the device + name as well. + + name This parameter is a character string that + contains the name the kernel will use for this + device (in /proc output, for instance). + (default "pt"). + + verbose This parameter controls the amount of logging + that the driver will do. Set it to 0 for + normal operation, 1 to see autoprobe progress + messages, or 2 to see additional debugging + output. (default 0) + + If this driver is built into the kernel, you can use + the following command line parameters, with the same values + as the corresponding module parameters listed above: + + pt.drive0 + pt.drive1 + pt.drive2 + pt.drive3 + + In addition, you can use the parameter pt.disable to disable + the driver entirely. + +*/ + +/* Changes: + + 1.01 GRG 1998.05.06 Round up transfer size, fix ready_wait, + loosed interpretation of ATAPI standard + for clearing error status. + Eliminate sti(); + 1.02 GRG 1998.06.16 Eliminate an Ugh. + 1.03 GRG 1998.08.15 Adjusted PT_TMO, use HZ in loop timing, + extra debugging + 1.04 GRG 1998.09.24 Repair minor coding error, added jumbo support + +*/ + +#define PT_VERSION "1.04" +#define PT_MAJOR 96 +#define PT_NAME "pt" +#define PT_UNITS 4 + +#include <linux/types.h> + +/* Here are things one can override from the insmod command. + Most are autoprobed by paride unless set here. Verbose is on + by default. + +*/ + +static int verbose = 0; +static int major = PT_MAJOR; +static char *name = PT_NAME; +static int disable = 0; + +static int drive0[6] = { 0, 0, 0, -1, -1, -1 }; +static int drive1[6] = { 0, 0, 0, -1, -1, -1 }; +static int drive2[6] = { 0, 0, 0, -1, -1, -1 }; +static int drive3[6] = { 0, 0, 0, -1, -1, -1 }; + +static int (*drives[4])[6] = {&drive0, &drive1, &drive2, &drive3}; + +#define D_PRT 0 +#define D_PRO 1 +#define D_UNI 2 +#define D_MOD 3 +#define D_SLV 4 +#define D_DLY 5 + +#define DU (*drives[unit]) + +/* end of parameters */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/fs.h> +#include <linux/delay.h> +#include <linux/slab.h> +#include <linux/mtio.h> +#include <linux/device.h> +#include <linux/sched.h> /* current, TASK_*, schedule_timeout() */ +#include <linux/mutex.h> + +#include <linux/uaccess.h> + +module_param(verbose, int, 0); +module_param(major, int, 0); +module_param(name, charp, 0); +module_param_array(drive0, int, NULL, 0); +module_param_array(drive1, int, NULL, 0); +module_param_array(drive2, int, NULL, 0); +module_param_array(drive3, int, NULL, 0); + +#include "paride.h" + +#define PT_MAX_RETRIES 5 +#define PT_TMO 3000 /* interrupt timeout in jiffies */ +#define PT_SPIN_DEL 50 /* spin delay in micro-seconds */ +#define PT_RESET_TMO 30 /* 30 seconds */ +#define PT_READY_TMO 60 /* 60 seconds */ +#define PT_REWIND_TMO 1200 /* 20 minutes */ + +#define PT_SPIN ((1000000/(HZ*PT_SPIN_DEL))*PT_TMO) + +#define STAT_ERR 0x00001 +#define STAT_INDEX 0x00002 +#define STAT_ECC 0x00004 +#define STAT_DRQ 0x00008 +#define STAT_SEEK 0x00010 +#define STAT_WRERR 0x00020 +#define STAT_READY 0x00040 +#define STAT_BUSY 0x00080 +#define STAT_SENSE 0x1f000 + +#define ATAPI_TEST_READY 0x00 +#define ATAPI_REWIND 0x01 +#define ATAPI_REQ_SENSE 0x03 +#define ATAPI_READ_6 0x08 +#define ATAPI_WRITE_6 0x0a +#define ATAPI_WFM 0x10 +#define ATAPI_IDENTIFY 0x12 +#define ATAPI_MODE_SENSE 0x1a +#define ATAPI_LOG_SENSE 0x4d + +static DEFINE_MUTEX(pt_mutex); +static int pt_open(struct inode *inode, struct file *file); +static long pt_ioctl(struct file *file, unsigned int cmd, unsigned long arg); +static int pt_release(struct inode *inode, struct file *file); +static ssize_t pt_read(struct file *filp, char __user *buf, + size_t count, loff_t * ppos); +static ssize_t pt_write(struct file *filp, const char __user *buf, + size_t count, loff_t * ppos); +static int pt_detect(void); + +/* bits in tape->flags */ + +#define PT_MEDIA 1 +#define PT_WRITE_OK 2 +#define PT_REWIND 4 +#define PT_WRITING 8 +#define PT_READING 16 +#define PT_EOF 32 + +#define PT_NAMELEN 8 +#define PT_BUFSIZE 16384 + +struct pt_unit { + struct pi_adapter pia; /* interface to paride layer */ + struct pi_adapter *pi; + int flags; /* various state flags */ + int last_sense; /* result of last request sense */ + int drive; /* drive */ + atomic_t available; /* 1 if access is available 0 otherwise */ + int bs; /* block size */ + int capacity; /* Size of tape in KB */ + int present; /* device present ? */ + char *bufptr; + char name[PT_NAMELEN]; /* pf0, pf1, ... */ +}; + +static int pt_identify(struct pt_unit *tape); + +static struct pt_unit pt[PT_UNITS]; + +static char pt_scratch[512]; /* scratch block buffer */ +static void *par_drv; /* reference of parport driver */ + +/* kernel glue structures */ + +static const struct file_operations pt_fops = { + .owner = THIS_MODULE, + .read = pt_read, + .write = pt_write, + .unlocked_ioctl = pt_ioctl, + .open = pt_open, + .release = pt_release, + .llseek = noop_llseek, +}; + +/* sysfs class support */ +static struct class *pt_class; + +static inline int status_reg(struct pi_adapter *pi) +{ + return pi_read_regr(pi, 1, 6); +} + +static inline int read_reg(struct pi_adapter *pi, int reg) +{ + return pi_read_regr(pi, 0, reg); +} + +static inline void write_reg(struct pi_adapter *pi, int reg, int val) +{ + pi_write_regr(pi, 0, reg, val); +} + +static inline u8 DRIVE(struct pt_unit *tape) +{ + return 0xa0+0x10*tape->drive; +} + +static int pt_wait(struct pt_unit *tape, int go, int stop, char *fun, char *msg) +{ + int j, r, e, s, p; + struct pi_adapter *pi = tape->pi; + + j = 0; + while ((((r = status_reg(pi)) & go) || (stop && (!(r & stop)))) + && (j++ < PT_SPIN)) + udelay(PT_SPIN_DEL); + + if ((r & (STAT_ERR & stop)) || (j > PT_SPIN)) { + s = read_reg(pi, 7); + e = read_reg(pi, 1); + p = read_reg(pi, 2); + if (j > PT_SPIN) + e |= 0x100; + if (fun) + printk("%s: %s %s: alt=0x%x stat=0x%x err=0x%x" + " loop=%d phase=%d\n", + tape->name, fun, msg, r, s, e, j, p); + return (e << 8) + s; + } + return 0; +} + +static int pt_command(struct pt_unit *tape, char *cmd, int dlen, char *fun) +{ + struct pi_adapter *pi = tape->pi; + pi_connect(pi); + + write_reg(pi, 6, DRIVE(tape)); + + if (pt_wait(tape, STAT_BUSY | STAT_DRQ, 0, fun, "before command")) { + pi_disconnect(pi); + return -1; + } + + write_reg(pi, 4, dlen % 256); + write_reg(pi, 5, dlen / 256); + write_reg(pi, 7, 0xa0); /* ATAPI packet command */ + + if (pt_wait(tape, STAT_BUSY, STAT_DRQ, fun, "command DRQ")) { + pi_disconnect(pi); + return -1; + } + + if (read_reg(pi, 2) != 1) { + printk("%s: %s: command phase error\n", tape->name, fun); + pi_disconnect(pi); + return -1; + } + + pi_write_block(pi, cmd, 12); + + return 0; +} + +static int pt_completion(struct pt_unit *tape, char *buf, char *fun) +{ + struct pi_adapter *pi = tape->pi; + int r, s, n, p; + + r = pt_wait(tape, STAT_BUSY, STAT_DRQ | STAT_READY | STAT_ERR, + fun, "completion"); + + if (read_reg(pi, 7) & STAT_DRQ) { + n = (((read_reg(pi, 4) + 256 * read_reg(pi, 5)) + + 3) & 0xfffc); + p = read_reg(pi, 2) & 3; + if (p == 0) + pi_write_block(pi, buf, n); + if (p == 2) + pi_read_block(pi, buf, n); + } + + s = pt_wait(tape, STAT_BUSY, STAT_READY | STAT_ERR, fun, "data done"); + + pi_disconnect(pi); + + return (r ? r : s); +} + +static void pt_req_sense(struct pt_unit *tape, int quiet) +{ + char rs_cmd[12] = { ATAPI_REQ_SENSE, 0, 0, 0, 16, 0, 0, 0, 0, 0, 0, 0 }; + char buf[16]; + int r; + + r = pt_command(tape, rs_cmd, 16, "Request sense"); + mdelay(1); + if (!r) + pt_completion(tape, buf, "Request sense"); + + tape->last_sense = -1; + if (!r) { + if (!quiet) + printk("%s: Sense key: %x, ASC: %x, ASQ: %x\n", + tape->name, buf[2] & 0xf, buf[12], buf[13]); + tape->last_sense = (buf[2] & 0xf) | ((buf[12] & 0xff) << 8) + | ((buf[13] & 0xff) << 16); + } +} + +static int pt_atapi(struct pt_unit *tape, char *cmd, int dlen, char *buf, char *fun) +{ + int r; + + r = pt_command(tape, cmd, dlen, fun); + mdelay(1); + if (!r) + r = pt_completion(tape, buf, fun); + if (r) + pt_req_sense(tape, !fun); + + return r; +} + +static void pt_sleep(int cs) +{ + schedule_timeout_interruptible(cs); +} + +static int pt_poll_dsc(struct pt_unit *tape, int pause, int tmo, char *msg) +{ + struct pi_adapter *pi = tape->pi; + int k, e, s; + + k = 0; + e = 0; + s = 0; + while (k < tmo) { + pt_sleep(pause); + k++; + pi_connect(pi); + write_reg(pi, 6, DRIVE(tape)); + s = read_reg(pi, 7); + e = read_reg(pi, 1); + pi_disconnect(pi); + if (s & (STAT_ERR | STAT_SEEK)) + break; + } + if ((k >= tmo) || (s & STAT_ERR)) { + if (k >= tmo) + printk("%s: %s DSC timeout\n", tape->name, msg); + else + printk("%s: %s stat=0x%x err=0x%x\n", tape->name, msg, s, + e); + pt_req_sense(tape, 0); + return 0; + } + return 1; +} + +static void pt_media_access_cmd(struct pt_unit *tape, int tmo, char *cmd, char *fun) +{ + if (pt_command(tape, cmd, 0, fun)) { + pt_req_sense(tape, 0); + return; + } + pi_disconnect(tape->pi); + pt_poll_dsc(tape, HZ, tmo, fun); +} + +static void pt_rewind(struct pt_unit *tape) +{ + char rw_cmd[12] = { ATAPI_REWIND, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }; + + pt_media_access_cmd(tape, PT_REWIND_TMO, rw_cmd, "rewind"); +} + +static void pt_write_fm(struct pt_unit *tape) +{ + char wm_cmd[12] = { ATAPI_WFM, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0 }; + + pt_media_access_cmd(tape, PT_TMO, wm_cmd, "write filemark"); +} + +#define DBMSG(msg) ((verbose>1)?(msg):NULL) + +static int pt_reset(struct pt_unit *tape) +{ + struct pi_adapter *pi = tape->pi; + int i, k, flg; + int expect[5] = { 1, 1, 1, 0x14, 0xeb }; + + pi_connect(pi); + write_reg(pi, 6, DRIVE(tape)); + write_reg(pi, 7, 8); + + pt_sleep(20 * HZ / 1000); + + k = 0; + while ((k++ < PT_RESET_TMO) && (status_reg(pi) & STAT_BUSY)) + pt_sleep(HZ / 10); + + flg = 1; + for (i = 0; i < 5; i++) + flg &= (read_reg(pi, i + 1) == expect[i]); + + if (verbose) { + printk("%s: Reset (%d) signature = ", tape->name, k); + for (i = 0; i < 5; i++) + printk("%3x", read_reg(pi, i + 1)); + if (!flg) + printk(" (incorrect)"); + printk("\n"); + } + + pi_disconnect(pi); + return flg - 1; +} + +static int pt_ready_wait(struct pt_unit *tape, int tmo) +{ + char tr_cmd[12] = { ATAPI_TEST_READY, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }; + int k, p; + + k = 0; + while (k < tmo) { + tape->last_sense = 0; + pt_atapi(tape, tr_cmd, 0, NULL, DBMSG("test unit ready")); + p = tape->last_sense; + if (!p) + return 0; + if (!(((p & 0xffff) == 0x0402) || ((p & 0xff) == 6))) + return p; + k++; + pt_sleep(HZ); + } + return 0x000020; /* timeout */ +} + +static void xs(char *buf, char *targ, int offs, int len) +{ + int j, k, l; + + j = 0; + l = 0; + for (k = 0; k < len; k++) + if ((buf[k + offs] != 0x20) || (buf[k + offs] != l)) + l = targ[j++] = buf[k + offs]; + if (l == 0x20) + j--; + targ[j] = 0; +} + +static int xn(char *buf, int offs, int size) +{ + int v, k; + + v = 0; + for (k = 0; k < size; k++) + v = v * 256 + (buf[k + offs] & 0xff); + return v; +} + +static int pt_identify(struct pt_unit *tape) +{ + int dt, s; + char *ms[2] = { "master", "slave" }; + char mf[10], id[18]; + char id_cmd[12] = { ATAPI_IDENTIFY, 0, 0, 0, 36, 0, 0, 0, 0, 0, 0, 0 }; + char ms_cmd[12] = + { ATAPI_MODE_SENSE, 0, 0x2a, 0, 36, 0, 0, 0, 0, 0, 0, 0 }; + char ls_cmd[12] = + { ATAPI_LOG_SENSE, 0, 0x71, 0, 0, 0, 0, 0, 36, 0, 0, 0 }; + char buf[36]; + + s = pt_atapi(tape, id_cmd, 36, buf, "identify"); + if (s) + return -1; + + dt = buf[0] & 0x1f; + if (dt != 1) { + if (verbose) + printk("%s: Drive %d, unsupported type %d\n", + tape->name, tape->drive, dt); + return -1; + } + + xs(buf, mf, 8, 8); + xs(buf, id, 16, 16); + + tape->flags = 0; + tape->capacity = 0; + tape->bs = 0; + + if (!pt_ready_wait(tape, PT_READY_TMO)) + tape->flags |= PT_MEDIA; + + if (!pt_atapi(tape, ms_cmd, 36, buf, "mode sense")) { + if (!(buf[2] & 0x80)) + tape->flags |= PT_WRITE_OK; + tape->bs = xn(buf, 10, 2); + } + + if (!pt_atapi(tape, ls_cmd, 36, buf, "log sense")) + tape->capacity = xn(buf, 24, 4); + + printk("%s: %s %s, %s", tape->name, mf, id, ms[tape->drive]); + if (!(tape->flags & PT_MEDIA)) + printk(", no media\n"); + else { + if (!(tape->flags & PT_WRITE_OK)) + printk(", RO"); + printk(", blocksize %d, %d MB\n", tape->bs, tape->capacity / 1024); + } + + return 0; +} + + +/* + * returns 0, with id set if drive is detected + * -1, if drive detection failed + */ +static int pt_probe(struct pt_unit *tape) +{ + if (tape->drive == -1) { + for (tape->drive = 0; tape->drive <= 1; tape->drive++) + if (!pt_reset(tape)) + return pt_identify(tape); + } else { + if (!pt_reset(tape)) + return pt_identify(tape); + } + return -1; +} + +static int pt_detect(void) +{ + struct pt_unit *tape; + int specified = 0, found = 0; + int unit; + + printk("%s: %s version %s, major %d\n", name, name, PT_VERSION, major); + + par_drv = pi_register_driver(name); + if (!par_drv) { + pr_err("failed to register %s driver\n", name); + return -1; + } + + specified = 0; + for (unit = 0; unit < PT_UNITS; unit++) { + struct pt_unit *tape = &pt[unit]; + tape->pi = &tape->pia; + atomic_set(&tape->available, 1); + tape->flags = 0; + tape->last_sense = 0; + tape->present = 0; + tape->bufptr = NULL; + tape->drive = DU[D_SLV]; + snprintf(tape->name, PT_NAMELEN, "%s%d", name, unit); + if (!DU[D_PRT]) + continue; + specified++; + if (pi_init(tape->pi, 0, DU[D_PRT], DU[D_MOD], DU[D_UNI], + DU[D_PRO], DU[D_DLY], pt_scratch, PI_PT, + verbose, tape->name)) { + if (!pt_probe(tape)) { + tape->present = 1; + found++; + } else + pi_release(tape->pi); + } + } + if (specified == 0) { + tape = pt; + if (pi_init(tape->pi, 1, -1, -1, -1, -1, -1, pt_scratch, + PI_PT, verbose, tape->name)) { + if (!pt_probe(tape)) { + tape->present = 1; + found++; + } else + pi_release(tape->pi); + } + + } + if (found) + return 0; + + pi_unregister_driver(par_drv); + printk("%s: No ATAPI tape drive detected\n", name); + return -1; +} + +static int pt_open(struct inode *inode, struct file *file) +{ + int unit = iminor(inode) & 0x7F; + struct pt_unit *tape = pt + unit; + int err; + + mutex_lock(&pt_mutex); + if (unit >= PT_UNITS || (!tape->present)) { + mutex_unlock(&pt_mutex); + return -ENODEV; + } + + err = -EBUSY; + if (!atomic_dec_and_test(&tape->available)) + goto out; + + pt_identify(tape); + + err = -ENODEV; + if (!(tape->flags & PT_MEDIA)) + goto out; + + err = -EROFS; + if ((!(tape->flags & PT_WRITE_OK)) && (file->f_mode & FMODE_WRITE)) + goto out; + + if (!(iminor(inode) & 128)) + tape->flags |= PT_REWIND; + + err = -ENOMEM; + tape->bufptr = kmalloc(PT_BUFSIZE, GFP_KERNEL); + if (tape->bufptr == NULL) { + printk("%s: buffer allocation failed\n", tape->name); + goto out; + } + + file->private_data = tape; + mutex_unlock(&pt_mutex); + return 0; + +out: + atomic_inc(&tape->available); + mutex_unlock(&pt_mutex); + return err; +} + +static long pt_ioctl(struct file *file, unsigned int cmd, unsigned long arg) +{ + struct pt_unit *tape = file->private_data; + struct mtop __user *p = (void __user *)arg; + struct mtop mtop; + + switch (cmd) { + case MTIOCTOP: + if (copy_from_user(&mtop, p, sizeof(struct mtop))) + return -EFAULT; + + switch (mtop.mt_op) { + + case MTREW: + mutex_lock(&pt_mutex); + pt_rewind(tape); + mutex_unlock(&pt_mutex); + return 0; + + case MTWEOF: + mutex_lock(&pt_mutex); + pt_write_fm(tape); + mutex_unlock(&pt_mutex); + return 0; + + default: + /* FIXME: rate limit ?? */ + printk(KERN_DEBUG "%s: Unimplemented mt_op %d\n", tape->name, + mtop.mt_op); + return -EINVAL; + } + + default: + return -ENOTTY; + } +} + +static int +pt_release(struct inode *inode, struct file *file) +{ + struct pt_unit *tape = file->private_data; + + if (atomic_read(&tape->available) > 1) + return -EINVAL; + + if (tape->flags & PT_WRITING) + pt_write_fm(tape); + + if (tape->flags & PT_REWIND) + pt_rewind(tape); + + kfree(tape->bufptr); + tape->bufptr = NULL; + + atomic_inc(&tape->available); + + return 0; + +} + +static ssize_t pt_read(struct file *filp, char __user *buf, size_t count, loff_t * ppos) +{ + struct pt_unit *tape = filp->private_data; + struct pi_adapter *pi = tape->pi; + char rd_cmd[12] = { ATAPI_READ_6, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }; + int k, n, r, p, s, t, b; + + if (!(tape->flags & (PT_READING | PT_WRITING))) { + tape->flags |= PT_READING; + if (pt_atapi(tape, rd_cmd, 0, NULL, "start read-ahead")) + return -EIO; + } else if (tape->flags & PT_WRITING) + return -EIO; + + if (tape->flags & PT_EOF) + return 0; + + t = 0; + + while (count > 0) { + + if (!pt_poll_dsc(tape, HZ / 100, PT_TMO, "read")) + return -EIO; + + n = count; + if (n > 32768) + n = 32768; /* max per command */ + b = (n - 1 + tape->bs) / tape->bs; + n = b * tape->bs; /* rounded up to even block */ + + rd_cmd[4] = b; + + r = pt_command(tape, rd_cmd, n, "read"); + + mdelay(1); + + if (r) { + pt_req_sense(tape, 0); + return -EIO; + } + + while (1) { + + r = pt_wait(tape, STAT_BUSY, + STAT_DRQ | STAT_ERR | STAT_READY, + DBMSG("read DRQ"), ""); + + if (r & STAT_SENSE) { + pi_disconnect(pi); + pt_req_sense(tape, 0); + return -EIO; + } + + if (r) + tape->flags |= PT_EOF; + + s = read_reg(pi, 7); + + if (!(s & STAT_DRQ)) + break; + + n = (read_reg(pi, 4) + 256 * read_reg(pi, 5)); + p = (read_reg(pi, 2) & 3); + if (p != 2) { + pi_disconnect(pi); + printk("%s: Phase error on read: %d\n", tape->name, + p); + return -EIO; + } + + while (n > 0) { + k = n; + if (k > PT_BUFSIZE) + k = PT_BUFSIZE; + pi_read_block(pi, tape->bufptr, k); + n -= k; + b = k; + if (b > count) + b = count; + if (copy_to_user(buf + t, tape->bufptr, b)) { + pi_disconnect(pi); + return -EFAULT; + } + t += b; + count -= b; + } + + } + pi_disconnect(pi); + if (tape->flags & PT_EOF) + break; + } + + return t; + +} + +static ssize_t pt_write(struct file *filp, const char __user *buf, size_t count, loff_t * ppos) +{ + struct pt_unit *tape = filp->private_data; + struct pi_adapter *pi = tape->pi; + char wr_cmd[12] = { ATAPI_WRITE_6, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }; + int k, n, r, p, s, t, b; + + if (!(tape->flags & PT_WRITE_OK)) + return -EROFS; + + if (!(tape->flags & (PT_READING | PT_WRITING))) { + tape->flags |= PT_WRITING; + if (pt_atapi + (tape, wr_cmd, 0, NULL, "start buffer-available mode")) + return -EIO; + } else if (tape->flags & PT_READING) + return -EIO; + + if (tape->flags & PT_EOF) + return -ENOSPC; + + t = 0; + + while (count > 0) { + + if (!pt_poll_dsc(tape, HZ / 100, PT_TMO, "write")) + return -EIO; + + n = count; + if (n > 32768) + n = 32768; /* max per command */ + b = (n - 1 + tape->bs) / tape->bs; + n = b * tape->bs; /* rounded up to even block */ + + wr_cmd[4] = b; + + r = pt_command(tape, wr_cmd, n, "write"); + + mdelay(1); + + if (r) { /* error delivering command only */ + pt_req_sense(tape, 0); + return -EIO; + } + + while (1) { + + r = pt_wait(tape, STAT_BUSY, + STAT_DRQ | STAT_ERR | STAT_READY, + DBMSG("write DRQ"), NULL); + + if (r & STAT_SENSE) { + pi_disconnect(pi); + pt_req_sense(tape, 0); + return -EIO; + } + + if (r) + tape->flags |= PT_EOF; + + s = read_reg(pi, 7); + + if (!(s & STAT_DRQ)) + break; + + n = (read_reg(pi, 4) + 256 * read_reg(pi, 5)); + p = (read_reg(pi, 2) & 3); + if (p != 0) { + pi_disconnect(pi); + printk("%s: Phase error on write: %d \n", + tape->name, p); + return -EIO; + } + + while (n > 0) { + k = n; + if (k > PT_BUFSIZE) + k = PT_BUFSIZE; + b = k; + if (b > count) + b = count; + if (copy_from_user(tape->bufptr, buf + t, b)) { + pi_disconnect(pi); + return -EFAULT; + } + pi_write_block(pi, tape->bufptr, k); + t += b; + count -= b; + n -= k; + } + + } + pi_disconnect(pi); + if (tape->flags & PT_EOF) + break; + } + + return t; +} + +static int __init pt_init(void) +{ + int unit; + int err; + + if (disable) { + err = -EINVAL; + goto out; + } + + if (pt_detect()) { + err = -ENODEV; + goto out; + } + + err = register_chrdev(major, name, &pt_fops); + if (err < 0) { + printk("pt_init: unable to get major number %d\n", major); + for (unit = 0; unit < PT_UNITS; unit++) + if (pt[unit].present) + pi_release(pt[unit].pi); + goto out; + } + major = err; + pt_class = class_create(THIS_MODULE, "pt"); + if (IS_ERR(pt_class)) { + err = PTR_ERR(pt_class); + goto out_chrdev; + } + + for (unit = 0; unit < PT_UNITS; unit++) + if (pt[unit].present) { + device_create(pt_class, NULL, MKDEV(major, unit), NULL, + "pt%d", unit); + device_create(pt_class, NULL, MKDEV(major, unit + 128), + NULL, "pt%dn", unit); + } + goto out; + +out_chrdev: + unregister_chrdev(major, "pt"); +out: + return err; +} + +static void __exit pt_exit(void) +{ + int unit; + for (unit = 0; unit < PT_UNITS; unit++) + if (pt[unit].present) { + device_destroy(pt_class, MKDEV(major, unit)); + device_destroy(pt_class, MKDEV(major, unit + 128)); + } + class_destroy(pt_class); + unregister_chrdev(major, name); + for (unit = 0; unit < PT_UNITS; unit++) + if (pt[unit].present) + pi_release(pt[unit].pi); +} + +MODULE_LICENSE("GPL"); +module_init(pt_init) +module_exit(pt_exit) |